qmk_firmware/keyboards/duck/orion/v3
ridingqwerty 66fe3001e4
Trim firmware sizes from default rules.mk, part 1 (#8027)
* Removed reference to firmware size in 0-9,a-f board-level and default keymap 'rules.mk' files

* Correct some 'rules.mk' in boards buried under vendor folders

* PR8027 patch

Co-authored-by: GeorgeKoenig <35542036+GeorgeKoenig@users.noreply.github.com>
Co-authored-by: James Young <18669334+noroadsleft@users.noreply.github.com>
2020-01-29 12:51:25 -05:00
..
keymaps/default [Keyboard] Orion Locking Indicator LED Support (#7683) 2019-12-29 11:16:24 -08:00
config.h [Keyboard] Orion Locking Indicator LED Support (#7683) 2019-12-29 11:16:24 -08:00
indicator_leds.c [Keyboard] Preliminary Support for Duck Orion V3 (#6892) 2019-10-04 22:06:57 -07:00
indicator_leds.h [Keyboard] Preliminary Support for Duck Orion V3 (#6892) 2019-10-04 22:06:57 -07:00
matrix.c Remove backlight_init_ports from duck/orion/v3 (#7878) 2020-01-13 03:49:01 +00:00
readme.md [Keyboard] Orion Locking Indicator LED Support (#7683) 2019-12-29 11:16:24 -08:00
rules.mk Trim firmware sizes from default rules.mk, part 1 (#8027) 2020-01-29 12:51:25 -05:00
v3.c [Keyboard] Orion Locking Indicator LED Support (#7683) 2019-12-29 11:16:24 -08:00
v3.h [Keyboard] Preliminary Support for Duck Orion V3 (#6892) 2019-10-04 22:06:57 -07:00

Duck Orion V3

Non official firmware for custom TKL Korean keyboard made by Duck.
Group buy was run December 2018 via geekhack with 100 keyboards total.

  • Keyboard Maintainer: MechMerlin
  • Hardware Supported: Duck Orion V3 PCB Ver 2.1
  • Hardware Availability: Wait until GB of the next revision

Make example for this keyboard (after setting up your build environment):

make duck/orion/v3:default

Reset Key: To put the Orion V3 into reset, hold Backspace key (K4N) while plugging in.

CAUTION: At this time 12/19/19 layer indicator lighting has not been implemented by default.

See the build environment setup and the make instructions for more information. Brand new to QMK? Start with our Complete Newbs Guide.

Hardware Notes

The Orion V3 PCB consists of:

Microchips

2 74HC237D 3-to-8 line decoders U1, U2 1 Atmega32u4 microcontroller 2 WS2811 LED controller U5, U6

Notes

Special thanks to Marcus aka Keebology for doing this remotely and mapping the matrix, indicator LEDs, and backlight LEDs.