History

Ryan 9dcd03b6ca Set `BOOTLOADER = stm32-dfu` for all applicable STM32 boards (#12956 ) * Set bootloader to stm32-dfu for STM32F303 * Set bootloader to stm32-dfu for STM32F0x2 * Set bootloader to stm32-dfu for STM32F4x1 * Set bootloader to stm32duino for sowbug * Delete redundant bootloader_defs headers * Add some missing MCU name comments * Move APM32 dfu-suffix overrides underneath bootloader * Remove redundant STM32_BOOTLOADER_ADDRESS defines/rules		2021-06-08 19:48:46 +10:00
..
keymaps	Added new keyboard - nack (#10940 )	2020-11-18 16:56:59 +00:00
config.h	Audio system overhaul (#11820 )	2021-02-15 09:40:38 +11:00
info.json
mcuconf.h	Fix up comments showing how to execute config migration. (#11621 )	2021-01-20 02:19:36 +11:00
nack.c
nack.h
readme.md
rules.mk	Set `BOOTLOADER = stm32-dfu` for all applicable STM32 boards (#12956 )	2021-06-08 19:48:46 +10:00

readme.md

nack

A ISO-friendly ortholinear keyboard, 13x4 keys.
See screenshots.

Keyboard Maintainer: pastapojken
Hardware Supported: nack PCB
Hardware Availability: github repo

Make example for this keyboard (after setting up your build environment):

make nack:default

Flashing example for this keyboard:

make nack:default:flash

To reset the board into bootloader mode, press the reset button on top of the keyboard. It's the tiny button to the upper left of the board. If you are using the official case/plate you might need to use something thin to reach & press it.

See the build environment setup and the make instructions for more information. Brand new to QMK? Start with our Complete Newbs Guide.