4b453dca92
* remove keyboard-level instances of `MIDI_ENABLE = no`
Command:
```
find keyboards/ -type f -name 'rules.mk' -and -not -path '*/keymaps/*' -exec sed -i -e '/^[ #]*MIDI_ENABLE[ \t]*=[ \t]*no/d' {} +
```
Co-Authored-By: Nick Brassel <nick@tzarc.org>
* fix case-sensitivity issues on MIDI_ENABLE
Change instances of `MIDI_ENABLE = YES` to `MIDI_ENABLE = yes`.
Command:
```
find keyboards/ -type f -name 'rules.mk' -and -not -path '*/keymaps/*' -exec sed -i -e 's;MIDI_ENABLE[ \t]*=[ \t]*[Yy][Ee][Ss];MIDI_ENABLE = yes;g' {} +
```
* replace `# MIDI controls` with `# MIDI support`
Replace `# MIDI controls` with `# MIDI support` in keyboard-level `rules.mk` files.
Command:
```
find keyboards/ -type f -name 'rules.mk' -and -not -path '*/keymaps/*' -exec sed -i -e 's;#[ \t]*MIDI[ \t]*\(controls\|support\).*;# MIDI support;g' {} +
```
* align inline comments
Aligns the inline comments to the length used by the QMK AVR rules.mk template.
Command:
```
find keyboards/ -type f -name 'rules.mk' -and -not -path '*/keymaps/*' -exec sed -i -e 's;MIDI_ENABLE *= *yes.*;MIDI_ENABLE = yes # MIDI support;g' {} +
```
* remove commented instances of `MIDI_ENABLE` from keyboard `rules.mk` files
Commands:
```
find keyboards/ -type f -name 'rules.mk' -and -not -path '*/keymaps/*' -exec sed -i -e 's;#\([ \t]*MIDI_ENABLE\) = yes; \1 = no ;' {} +
find keyboards/ -type f -name 'rules.mk' -and -not -path '*/keymaps/*' -exec sed -i -e 's;^\([ \t]*\)\(MIDI_ENABLE = no\);\2\1;' {} +
find keyboards/ -type f -name 'rules.mk' -and -not -path '*/keymaps/*' -exec sed -i -e '/^[ #]\+MIDI_ENABLE *= *no/d' {} +
```
* remove MIDI configuration boilerplate from keyboard config.h files
Co-authored-by: Nick Brassel <nick@tzarc.org>
|
||
|---|---|---|
| .. | ||
| keymaps | ||
| config.h | ||
| info.json | ||
| LED_controls.ino | ||
| led.c | ||
| matrix.c | ||
| readme.md | ||
| rules.mk | ||
| ut47.c | ||
| ut47.h | ||
ut47
Somewhere between ortholinear and standard offset. Created to have all the same functions on a Planck in a keyboard but with a more conventional keyboard row stagger.
Keyboard Maintainer: filoxo, [network_operations]
Hardware Supported: PCB design, Arduino Pro Micro
Hardware Availability: How to order
Instructions
To flash the UT47 without LEDs (single controller), run:
make 40percentclub/ut47:default
To enable the UT47 LEDs (dual controller), run this for the main controller:
make 40percentclub/ut47:default LED_ENABLE=yes
Or you can add LED_ENABLE = yes to rules.mk
And then flash LED_controls.ino to the second controller using Arduino IDE or similar. NOTE: Arduino IDE will require importing additional libraries to compile.
The reason this is an "opt-in" feature is to prevent sending serial communication over the pin, in case it ends up being used for something else (like RGB underglow).
Layout
Go to the default layout README for more information.
Additional info
Credit: Forked from di0ib TMK version
See build environment setup then the make instructions for more information.