790f94533c
* Convert to config * Convert to config * Convert to config * Convert to config * Convert to config * Convert to config * Convert to config * Convert to config * revert changes |
||
|---|---|---|
| .. | ||
| keymaps | ||
| rev1 | ||
| rev2 | ||
| rev3 | ||
| .noci | ||
| config.h | ||
| info.json | ||
| readme.md | ||
| rules.mk | ||
| ymd75.c | ||
| ymd75.h | ||
YMD75 / MT84
75% keyboard from YMDK. YMDK sell the board and name it "YMD75", however revision 1 of the PCB has "MT84" printed on both sides.
This firmware can also be flashed onto the KBDFans KBD75 Round 2 Bootmapper Client boards sold during the mid-2018 timeframe.
- Keyboard Maintainer: Wayne K Jones
- Hardware Supported:
- rev1 (ATmega32a)
- rev2 (ATmega32a)
- rev3 (ATmega32u4)
- Hardware Availability: https://www.aliexpress.com/item/32812690592.html
Make example for this keyboard (after setting up your build environment):
make ymd75/rev1:default
Flashing example for this keyboard (after setting up the bootloadHID flashing environment)
make ymd75/rev1:default:flash
Reset Key: Hold down the key located at Key below the top right key, commonly programmed as Backspace while plugging in the keyboard. On PCB revision 2, enter the bootloader by holding L_CTRL while plugging in the keyboard.
See the build environment setup and the make instructions for more information. Brand new to QMK? Start with our Complete Newbs Guide.