qmk_firmware/keyboards/alpine65
Ryan 9dcd03b6ca
Set BOOTLOADER = stm32-dfu for all applicable STM32 boards ()
* Set bootloader to stm32-dfu for STM32F303

* Set bootloader to stm32-dfu for STM32F0x2

* Set bootloader to stm32-dfu for STM32F4x1

* Set bootloader to stm32duino for sowbug

* Delete redundant bootloader_defs headers

* Add some missing MCU name comments

* Move APM32 dfu-suffix overrides underneath bootloader

* Remove redundant STM32_BOOTLOADER_ADDRESS defines/rules
2021-06-08 19:48:46 +10:00
..
keymaps Alpine65 () 2021-01-11 00:41:53 -05:00
alpine65.c Alpine65 () 2021-01-11 00:41:53 -05:00
alpine65.h Alpine65 () 2021-01-11 00:41:53 -05:00
chconf.h Fix up comments showing how to execute config migration. () 2021-01-20 02:19:36 +11:00
config.h Fix RGBLIGHT_LIMIT_VAL typo () 2021-02-08 20:12:33 +11:00
halconf.h Fix up comments showing how to execute config migration. () 2021-01-20 02:19:36 +11:00
info.json Add missing info.json files for keyboards () 2021-03-15 01:06:55 -07:00
mcuconf.h Fix up comments showing how to execute config migration. () 2021-01-20 02:19:36 +11:00
readme.md Alpine65 () 2021-01-11 00:41:53 -05:00
rules.mk Set BOOTLOADER = stm32-dfu for all applicable STM32 boards () 2021-06-08 19:48:46 +10:00

Alpine65 QMK Firmware

Introduction

This is the QMK firmware repository for the Alpine65, a 65% hotswap keyboard designed by Bitmap Designs and Gondolindrim.

The Alpine65 has entered GB and sucessfully finalized in november 2020; there is no further way to buy an Alpine65 other than the secondhand market. The IC page for the keyboard can be found here.

How to compile

After setting up your build environment, you can compile the Alpine65 default keymap by using:

make alpine65:default

See the build environment setup and the make instructions for more information. Brand new to QMK? Start with our Complete Newbs Guide.