qmk_firmware/keyboards/nebula12
Ryan 9dcd03b6ca
Set BOOTLOADER = stm32-dfu for all applicable STM32 boards ()
* Set bootloader to stm32-dfu for STM32F303

* Set bootloader to stm32-dfu for STM32F0x2

* Set bootloader to stm32-dfu for STM32F4x1

* Set bootloader to stm32duino for sowbug

* Delete redundant bootloader_defs headers

* Add some missing MCU name comments

* Move APM32 dfu-suffix overrides underneath bootloader

* Remove redundant STM32_BOOTLOADER_ADDRESS defines/rules
2021-06-08 19:48:46 +10:00
..
keymaps
chconf.h ChibiOS conf migrations... take 11 () 2021-01-21 17:00:53 +11:00
config.h Fix up WS2812 SPI driver on F072. () 2021-06-03 09:48:16 +10:00
halconf.h Fix up comments showing how to execute config migration. () 2021-01-20 02:19:36 +11:00
info.json
mcuconf.h Fix up comments showing how to execute config migration. () 2021-01-20 02:19:36 +11:00
nebula12.c
nebula12.h
readme.md
rules.mk Set BOOTLOADER = stm32-dfu for all applicable STM32 boards () 2021-06-08 19:48:46 +10:00

Nebula65

This is a standard fixed layout 12 key PCB. It supports VIA, full per-key RGB and underglow RGB.

Instructions

Build

Make example for this keyboard (after setting up your build environment):

make nebula12:via

See the build environment setup and the make instructions for more information. Brand new to QMK? Start with our Complete Newbs Guide.

Reset

  • Unplug
  • Hold Escape
  • Plug In
  • Unplug
  • Release Escape

Flash

  • Unplug
  • Hold Escape
  • Plug In
  • Flash using QMK Toolbox or dfu-util (make nebula12:<keymap>:dfu-util)