qmk_firmware/keyboards/melgeek/mj63
Ryan 9dcd03b6ca
Set BOOTLOADER = stm32-dfu for all applicable STM32 boards (#12956)
* Set bootloader to stm32-dfu for STM32F303

* Set bootloader to stm32-dfu for STM32F0x2

* Set bootloader to stm32-dfu for STM32F4x1

* Set bootloader to stm32duino for sowbug

* Delete redundant bootloader_defs headers

* Add some missing MCU name comments

* Move APM32 dfu-suffix overrides underneath bootloader

* Remove redundant STM32_BOOTLOADER_ADDRESS defines/rules
2021-06-08 19:48:46 +10:00
..
keymaps
rev1 Set BOOTLOADER = stm32-dfu for all applicable STM32 boards (#12956) 2021-06-08 19:48:46 +10:00
rev2 Set BOOTLOADER = stm32-dfu for all applicable STM32 boards (#12956) 2021-06-08 19:48:46 +10:00
config.h [Keyboard] Update MJ63 architecture to support multi version (#11788) 2021-02-20 20:59:32 -08:00
info.json
mj63.c
mj63.h
readme.md

MelGeek MJ63

MJ63

A hotswap 60% RGB Custom Mechanical keyboard with arrows and the size of left shift is 2.0U

  • Keyboard Maintainer: melgeek001365
  • Hardware Supported: MJ63 V1.0.0 20200712
  • Hardware Availability: MelGeek

Make example for this keyboard (after setting up your build environment):

make melgeek/mj63/rev1:default

See the build environment setup and the make instructions for more information. Brand new to QMK? Start with our Complete Newbs Guide.