8a330b33ff
* Add final RGBKB Sol firmware * Apply suggestions from code review Apply most of the changes noroadsleft has suggested Co-Authored-By: Legonut <legonut3@gmail.com> * Cleanup readme * Cleanup keymaps per @noroadslefts suggestions * Remove eeproms, use set_single_persistent_default_layer * Suggestions from @noroadsleft and @drashna some small cleanup * Change RGB_SMOD to RGB_RMOD * fix RGB_SMOD * Apply suggestions from code review Remove redundant lines Co-Authored-By: Legonut <legonut3@gmail.com>
292 lines
15 KiB
C
Executable File
292 lines
15 KiB
C
Executable File
#include QMK_KEYBOARD_H
|
|
#ifdef PROTOCOL_LUFA
|
|
#include "lufa.h"
|
|
#include "split_util.h"
|
|
#endif
|
|
#ifdef SSD1306OLED
|
|
#include "common/ssd1306.h"
|
|
#endif
|
|
|
|
extern keymap_config_t keymap_config;
|
|
|
|
#ifdef RGBLIGHT_ENABLE
|
|
//Following line allows macro to read current RGB settings
|
|
extern rgblight_config_t rgblight_config;
|
|
#endif
|
|
|
|
extern uint8_t is_master;
|
|
|
|
// Each layer gets a name for readability, which is then used in the keymap matrix below.
|
|
// The underscores don't mean anything - you can have a layer called STUFF or any other name.
|
|
// Layer names don't all need to be of the same length, obviously, and you can also skip them
|
|
// entirely and just use numbers.
|
|
enum layer_number {
|
|
_QWERTY = 0,
|
|
_FN,
|
|
_ADJ
|
|
};
|
|
|
|
enum custom_keycodes {
|
|
QWERTY = SAFE_RANGE,
|
|
FN,
|
|
ADJ,
|
|
RGBRST
|
|
};
|
|
|
|
|
|
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
|
|
/* QWERTY
|
|
* ,------------------------------------------------. ,------------------------------------------------.
|
|
* | ` | 1 | 2 | 3 | 4 | 5 | - | | = | 6 | 7 | 8 | 9 | 0 | Bspc |
|
|
* |------+------+------+------+------+------|------| |------|------+------+------+------+------+------|
|
|
* | Tab | Q | W | E | R | T | [ | | ] | Y | U | I | O | P | \ |
|
|
* |------+------+------+------+------+------|------| |------|------+------+------+------+------+------|
|
|
* | Esc | A | S | D | F | G | | | | H | J | K | L | ; | ' |
|
|
* |------+------+------+------+------+------+------| |------+------+------+------+------+------+------|
|
|
* | Shift| Z | X | C | V | B | | | | N | M | , | . | / | Shift|
|
|
* |------+------+------+------+------+------+------| |------+------+------+------+------+------+------|
|
|
* | Ctrl | Alt | FN | LGui | RGB | Spc | Del | | Bspc | Spc | Adj | LGui | FN | Alt | Ctrl |
|
|
* |------+------+------+------+------+------+------| |------+------+------+------+------+------+------|
|
|
* | Spc | Ent | | Ent | Spc |
|
|
* `-------------' `-------------'
|
|
*/
|
|
[_QWERTY] = LAYOUT_kc( \
|
|
//,--------+--------+--------+--------+--------+--------+--+--------+. ,--------+--+--------+--------+--------+--------+--------+--------+
|
|
GRV, 1, 2, 3, 4, 5, MINS, EQL, 6, 7, 8, 9, 0, BSPC,
|
|
//|--------+--------+--------+--------+--------+--------+--+--------| |--------+--+--------+--------+--------+--------+--------+--------|
|
|
TAB, Q, W, E, R, T, LBRC, RBRC, Y, U, I, O, P, BSLS,
|
|
//|--------+--------+--------+--------+--------+--------+--+--------| |--------+--+--------+--------+--------+--------+--------+--------|
|
|
ESC, A, S, D, F, G, _______, _______, H, J, K, L, SCLN, QUOT,
|
|
//|--------+--------+--------+--------+--------+--------+--+--------| |--------+--+--------+--------+--------+--------+--------+--------|
|
|
LSPO, Z, X, C, V, B, _______, _______, N, M, COMM, DOT, SLSH, RSPC,
|
|
//|--------+--------+--------+--------+--------+--------+--+--------| |--------+--+--------+--------+--------+--------+--------+--------|
|
|
LCTL, LALT, FN, LGUI, RGB_MOD, SPC, DEL, BSPC, SPC, ADJ, LGUI, FN, LALT, LCTL,
|
|
//|--------+--------+--------+--------+--------+--+--------+--------| |--------+--+--------+--------+--------+--------+--------+--------|
|
|
VOLD, VOLU, SPC, ENT, ENT, SPC, DOWN, UP
|
|
// Rotary Left |--------+--------| |--------+-----------+ Rotary Right
|
|
),
|
|
|
|
/* FN
|
|
* ,------------------------------------------------. ,------------------------------------------------.
|
|
* | F1 | F2 | F3 | F4 | F5 | F6 | | | | F7 | F8 | F9 | F10 | F11 | F12 |
|
|
* |------+------+------+------+------+------|------| |------|------+------+------+------+------+------|
|
|
* | | | | Up | | | | | | | | | | | |
|
|
* |------+------+------+------+------+------|------| |------|------+------+------+------+------+------|
|
|
* | | | Left | Down | Right| | | | | Play | Next | Mute | V-Up |V-Down| |
|
|
* |------+------+------+------+------+------+------| |------+------+------+------+------+------+------|
|
|
* | | | | | | | | | | | | | | | |
|
|
* |------+------+------+------+------+------+------| |------+------+------+------+------+------+------|
|
|
* | | | | | | | | | | | | | | | |
|
|
* |------+------+------+------+------+------+------| |------+------+------+------+------+------+------|
|
|
* | | | | | |
|
|
* `-------------' `-------------'
|
|
*/
|
|
[_FN] = LAYOUT_kc( \
|
|
//,--------+--------+--------+--------+--------+--------+--+--------+. ,--------+--+--------+--------+--------+--------+--------+--------+
|
|
F1, F2, F3, F4, F5, F6, _______, _______, F7, F8, F9, F10, F11, F12,
|
|
//|--------+--------+--------+--------+--------+--------+--+--------| |--------+--+--------+--------+--------+--------+--------+--------|
|
|
_______, _______, _______, UP, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
|
|
//|--------+--------+--------+--------+--------+--------+--+--------| |--------+--+--------+--------+--------+--------+--------+--------|
|
|
_______, _______, LEFT, DOWN, RGHT, _______, _______, _______, MPLY, MNXT, MUTE, VOLD, VOLU, _______,
|
|
//|--------+--------+--------+--------+--------+--------+--+--------| |--------+--+--------+--------+--------+--------+--------+--------|
|
|
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
|
|
//|--------+--------+--------+--------+--------+--------+--+--------| |--------+--+--------+--------+--------+--------+--------+--------|
|
|
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
|
|
//|--------+--------+--------+--------+--------+--+--------+--------| |--------+--+--------+--------+--------+--------+--------+--------|
|
|
VOLD, VOLU, _______, _______, _______, _______, UP, DOWN
|
|
// Rotary Left |--------+--------| |--------+-----------+ Rotary Right
|
|
),
|
|
|
|
/* ADJ
|
|
* ,------------------------------------------------. ,------------------------------------------------.
|
|
* | | | | | | | | | | | | | | | |
|
|
* |------+------+------+------+------+------|------| |------|------+------+------+------+------+------|
|
|
* | | Sat+ | Val+ | Hue+ |Speed+|Toggle| | | | | | | | | |
|
|
* |------+------+------+------+------+------|------| |------|------+------+------+------+------+------|
|
|
* | | Sat- | Val- | Hue- |Speed-|Reset | | | | |QWERTY| COLE | | | |
|
|
* |------+------+------+------+------+------+------| |------+------+------+------+------+------+------|
|
|
* | | | | | | | | | | | | | | | |
|
|
* |------+------+------+------+------+------+------| |------+------+------+------+------+------+------|
|
|
* | | | | | | | | | | | | | | | |
|
|
* |------+------+------+------+------+------+------| |------+------+------+------+------+------+------|
|
|
* | | | | | |
|
|
* `-------------' `-------------'
|
|
*/
|
|
|
|
[_ADJ] = LAYOUT( \
|
|
//,--------+--------+--------+--------+--------+--------+--+--------+. ,--------+--+--------+--------+--------+--------+--------+--------+
|
|
RESET, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, RESET, \
|
|
//|--------+--------+--------+--------+--------+--------+--+--------| |--------+--+--------+--------+--------+--------+--------+--------|
|
|
_______, RGB_SAI, RGB_VAI, RGB_HUI, RGB_SPI, RGB_TOG, _______, _______, _______, _______, _______, _______, _______, _______, \
|
|
//|--------+--------+--------+--------+--------+--------+--+--------| |--------+--+--------+--------+--------+--------+--------+--------|
|
|
_______, RGB_SAD, RGB_VAD, RGB_HUD, RGB_SPD, RGBRST, _______, _______, _______, _______, _______, _______, _______, _______, \
|
|
//|--------+--------+--------+--------+--------+--------+--+--------| |--------+--+--------+--------+--------+--------+--------+--------|
|
|
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, \
|
|
//|--------+--------+--------+--------+--------+--------+--+--------| |--------+--+--------+--------+--------+--------+--------+--------|
|
|
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, \
|
|
//|--------+--------+--------+--------+--------+--+--------+--------| |--------+--------+--+--------+--------+--------+--------+--------|
|
|
_______, _______, _______, _______, _______, _______, _______, _______ \
|
|
// Rotary Left |--------+--------| |--------+--------+ Rotary Right
|
|
)
|
|
};
|
|
|
|
|
|
// define variables for reactive RGB
|
|
bool TOG_STATUS = false;
|
|
int RGB_current_mode;
|
|
|
|
bool process_record_user(uint16_t keycode, keyrecord_t *record) {
|
|
|
|
switch (keycode) {
|
|
case QWERTY:
|
|
if (record->event.pressed) {
|
|
set_single_persistent_default_layer(_QWERTY);
|
|
}
|
|
return false;
|
|
break;
|
|
case FN:
|
|
if (record->event.pressed) {
|
|
layer_on(_FN);
|
|
} else {
|
|
layer_off(_FN);
|
|
}
|
|
return false;
|
|
break;
|
|
case ADJ:
|
|
if (record->event.pressed) {
|
|
layer_on(_ADJ);
|
|
} else {
|
|
layer_off(_ADJ);
|
|
}
|
|
return false;
|
|
break;
|
|
//led operations - RGB mode change now updates the RGB_current_mode to allow the right RGB mode to be set after reactive keys are released
|
|
case RGBRST:
|
|
#ifdef RGBLIGHT_ENABLE
|
|
if (record->event.pressed) {
|
|
eeconfig_update_rgblight_default();
|
|
rgblight_enable();
|
|
RGB_current_mode = rgblight_config.mode;
|
|
}
|
|
#endif
|
|
break;
|
|
}
|
|
return true;
|
|
}
|
|
|
|
void matrix_init_user(void) {
|
|
#ifdef RGBLIGHT_ENABLE
|
|
RGB_current_mode = rgblight_config.mode;
|
|
#endif
|
|
//SSD1306 OLED init, make sure to add #define SSD1306OLED in config.h
|
|
#ifdef SSD1306OLED
|
|
iota_gfx_init(!has_usb()); // turns on the display
|
|
#endif
|
|
}
|
|
|
|
void matrix_scan_user(void) {
|
|
#ifdef SSD1306OLED
|
|
// led_test_init();
|
|
iota_gfx_task(); // this is what updates the display continuously
|
|
#endif
|
|
}
|
|
|
|
|
|
//SSD1306 OLED update loop, make sure to add #define SSD1306OLED in config.h
|
|
#ifdef SSD1306OLED
|
|
|
|
// hook point for 'led_test' keymap
|
|
// 'default' keymap's led_test_init() is empty function, do nothing
|
|
// 'led_test' keymap's led_test_init() force rgblight_mode_noeeprom(35);
|
|
__attribute__ ((weak))
|
|
void led_test_init(void) {}
|
|
|
|
void matrix_update(struct CharacterMatrix *dest,
|
|
const struct CharacterMatrix *source) {
|
|
if (memcmp(dest->display, source->display, sizeof(dest->display))) {
|
|
memcpy(dest->display, source->display, sizeof(dest->display));
|
|
dest->dirty = true;
|
|
}
|
|
}
|
|
|
|
//assign the right code to your layers for OLED display
|
|
#define L_BASE 0
|
|
#define L_FN (1<<_FN)
|
|
#define L_ADJ (1<<_ADJ)
|
|
#define L_ADJ_TRI (L_ADJ|L_FN)
|
|
|
|
static void render_logo(struct CharacterMatrix *matrix) {
|
|
|
|
static char logo[]={
|
|
0x80,0x81,0x82,0x83,0x84,0x85,0x86,0x87,0x88,0x89,0x8a,0x8b,0x8c,0x8d,0x8e,0x8f,0x90,0x91,0x92,0x93,0x94,
|
|
0xa0,0xa1,0xa2,0xa3,0xa4,0xa5,0xa6,0xa7,0xa8,0xa9,0xaa,0xab,0xac,0xad,0xae,0xaf,0xb0,0xb1,0xb2,0xb3,0xb4,
|
|
0xc0,0xc1,0xc2,0xc3,0xc4,0xc5,0xc6,0xc7,0xc8,0xc9,0xca,0xcb,0xcc,0xcd,0xce,0xcf,0xd0,0xd1,0xd2,0xd3,0xd4,
|
|
0};
|
|
matrix_write(matrix, logo);
|
|
}
|
|
|
|
|
|
|
|
void render_status(struct CharacterMatrix *matrix) {
|
|
|
|
// Render to mode icon
|
|
static char logo[][2][3]={{{0x95,0x96,0},{0xb5,0xb6,0}},{{0x97,0x98,0},{0xb7,0xb8,0}}};
|
|
if(keymap_config.swap_lalt_lgui==false){
|
|
matrix_write(matrix, logo[0][0]);
|
|
matrix_write_P(matrix, PSTR("\n"));
|
|
matrix_write(matrix, logo[0][1]);
|
|
}else{
|
|
matrix_write(matrix, logo[1][0]);
|
|
matrix_write_P(matrix, PSTR("\n"));
|
|
matrix_write(matrix, logo[1][1]);
|
|
}
|
|
|
|
// Define layers here, Have not worked out how to have text displayed for each layer. Copy down the number you see and add a case for it below
|
|
char buf[40];
|
|
snprintf(buf,sizeof(buf), "Undef-%ld", layer_state);
|
|
matrix_write_P(matrix, PSTR("\nLayer: "));
|
|
switch (layer_state) {
|
|
case L_BASE:
|
|
matrix_write_P(matrix, PSTR("Laser"));
|
|
break;
|
|
case L_FN:
|
|
matrix_write_P(matrix, PSTR("Function"));
|
|
break;
|
|
case L_ADJ:
|
|
case L_ADJ_TRI:
|
|
matrix_write_P(matrix, PSTR("Adjustment"));
|
|
break;
|
|
default:
|
|
matrix_write(matrix, buf);
|
|
}
|
|
|
|
// Host Keyboard LED Status
|
|
char led[40];
|
|
snprintf(led, sizeof(led), "\n%s %s %s",
|
|
(host_keyboard_leds() & (1<<USB_LED_NUM_LOCK)) ? "NUMLOCK" : " ",
|
|
(host_keyboard_leds() & (1<<USB_LED_CAPS_LOCK)) ? "CAPS" : " ",
|
|
(host_keyboard_leds() & (1<<USB_LED_SCROLL_LOCK)) ? "SCLK" : " ");
|
|
matrix_write(matrix, led);
|
|
}
|
|
|
|
|
|
void iota_gfx_task_user(void) {
|
|
struct CharacterMatrix matrix;
|
|
|
|
#if DEBUG_TO_SCREEN
|
|
if (debug_enable) {
|
|
return;
|
|
}
|
|
#endif
|
|
|
|
matrix_clear(&matrix);
|
|
if(is_master){
|
|
render_status(&matrix);
|
|
}else{
|
|
render_logo(&matrix);
|
|
}
|
|
matrix_update(&display, &matrix);
|
|
}
|
|
|
|
#endif
|