History

Danny ea43bc8972 Keebio RGB wiring update (#7754 ) * Change RGB wiring for Levinson * Update RGB wiring for Iris * Update RGB wiring for Nyquist * Update RGB wiring for Quefrency * Update RGB wiring for Viterbi * Update RGB wiring for Fourier * Update RGB wiring for BFO * Handle redefinition of RGBLED_SPLIT		2020-08-29 14:30:02 -07:00
..
keymaps	Remove filesize changes from default-ish rules.mk files, sans handwired (#8040 )	2020-01-30 13:47:48 -05:00
rev1	Keebio RGB wiring update (#7754 )	2020-08-29 14:30:02 -07:00
rev2	Keebio RGB wiring update (#7754 )	2020-08-29 14:30:02 -07:00
rev3	Add Keebio lighting defaults (#8884 )	2020-04-25 14:26:26 -07:00
config.h
info.json
levinson.c
levinson.h
readme.md	Update Levinson Readme to reflect changes to directory structure (#7883 )	2020-01-13 11:34:12 -05:00
rules.mk	Remove filesize changes from default-ish rules.mk files, sans handwired (#8040 )	2020-01-30 13:47:48 -05:00

readme.md

Levinson

A split 40% split 4x12 ortholinear keyboard made and sold by Keebio. It's essentially a Let's Split with LED backlight support and 2u thumb key support. More info at Keebio.

Keyboard Maintainer: Bakingpy/nooges
Hardware Supported: Pro Micro, Elite-C
Hardware Availability: Keebio

Make example for this keyboard (after setting up your build environment):

make keebio/levinson/rev3:default

Example of flashing this keyboard with Pro micro:

make keebio/levinson/rev3:default:avrdude

Example of flashing this keyboard with Elite-C:

You'll need to add BOOTLOADER = atmel-dfu to your rules.mk to ensure that resetting the board works properly.

Hold the reset button on the Elite-C board, or the reset button on the keyboard if already assembled, then release the button and run:

make keebio/levinson/rev3:default:dfu

See the build environment setup and the make instructions for more information. Brand new to QMK? Start with our Complete Newbs Guide.

A build guide for this keyboard can be found here: Levinson Build Guide