qmk_firmware/keyboards/lily58/keymaps/yshrsmz/keymap.c
Ryan 23c31dd929
update lily58/rev1:yshrsmz (#8298)
* update lily58/rev1:yshrsmz

* use pre-shifted keycodes
2020-03-06 06:56:28 +11:00

240 lines
11 KiB
C

#include QMK_KEYBOARD_H
#ifdef PROTOCOL_LUFA
#include "lufa.h"
#include "split_util.h"
#endif
#ifdef SSD1306OLED
#include "ssd1306.h"
#endif
#ifdef RGBLIGHT_ENABLE
//Following line allows macro to read current RGB settings
extern rgblight_config_t rgblight_config;
#endif
extern uint8_t is_master;
enum layer_names {
_QWERTY,
_LOWER,
_RAISE,
_ADJUST
};
enum custom_keycodes {
QWERTY = SAFE_RANGE,
LOWER,
RAISE,
ADJUST,
};
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
/* QWERTY
* ,-----------------------------------------. ,-----------------------------------------.
* | ESC | 1 | 2 | 3 | 4 | 5 | | 6 | 7 | 8 | 9 | 0 | = |
* |------+------+------+------+------+------| |------+------+------+------+------+------|
* | Tab | Q | W | E | R | T | | Y | U | I | O | P | - |
* |------+------+------+------+------+------| |------+------+------+------+------+------|
* |LCTRL | A | S | D | F | G |-------. ,-------| H | J | K | L | ; | ' |
* |------+------+------+------+------+------| [ | | ] |------+------+------+------+------+------|
* |LShift| Z | X | C | V | B |-------| |-------| N | M | , | . | / | \ |
* `-----------------------------------------/ / \ \-----------------------------------------'
* | LAlt | LGUI |LOWER | /BackSP / \Enter \ |Space |RAISE | RGUI |
* | | | |/ / \ \ | | | |
* `----------------------------' '------''--------------------'
*/
[_QWERTY] = LAYOUT(
KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_EQL,
KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_MINS,
KC_LCTRL, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT,
KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_LBRC, KC_RBRC, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_BSLS,
KC_LALT, KC_LGUI,LOWER, KC_BSPC, KC_ENT, KC_SPC, RAISE, KC_RGUI
),
/* LOWER
* ,-----------------------------------------. ,-----------------------------------------.
* | ~ | ! | @ | # | $ | % | | ^ | & | * | ( | ) | + |
* |------+------+------+------+------+------| |------+------+------+------+------+------|
* | F1 | F2 | F3 | F4 | F5 | F6 | | F7 | F8 | F9 | F10 | F11 | F12 |
* |------+------+------+------+------+------| |------+------+------+------+------+------|
* | | | | | | |-------. ,-------| Left | Down | Up |Right | PGUP | |
* |------+------+------+------+------+------| [ | | ] |------+------+------+------+------+------|
* | | | | | | |-------| |-------| Home | End |Alt+← |Alt+→ | PGDN | |
* `-----------------------------------------/ / \ \-----------------------------------------'
* | LAlt | LGUI |LOWER | /BackSP / \Enter \ |Space |RAISE | RGUI |
* | | | |/ / \ \ | | | |
* `----------------------------' '------''--------------------'
*/
[_LOWER] = LAYOUT(
KC_TILD, KC_EXLM, KC_AT, KC_HASH, KC_DLR, KC_PERC, KC_CIRC, KC_AMPR, KC_ASTR,KC_LPRN, KC_RPRN, KC_PLUS,
KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12,
_______, _______, _______, _______, _______, _______, KC_LEFT, KC_DOWN, KC_UP, KC_RGHT, KC_PGUP, _______,
_______, _______, _______, _______, _______, _______, KC_LCBR, KC_RCBR, KC_HOME, KC_END, LALT(KC_LEFT), LALT(KC_RGHT), KC_PGDN, _______,
_______, _______, _______, _______, _______, _______, _______, _______
),
/* RAISE
* ,-----------------------------------------. ,-----------------------------------------.
* | ` | ! | @ | # | $ | % | | ^ | & | * | ( | ) | + |
* |------+------+------+------+------+------| |------+------+------+------+------+------|
* | F1 | F2 | F3 | F4 | F5 | F6 | | | | | | | |
* |------+------+------+------+------+------| |------+------+------+------+------+------|
* | F7 | F8 | F9 | F10 | F11 | F12 |-------. ,-------| Left | Down | Up |Right | PGUP | |
* |------+------+------+------+------+------| [ | | ] |------+------+------+------+------+------|
* | | | | | | |-------| |-------| Home | End |Alt+← |Alt+→ | PGDN | |
* `-----------------------------------------/ / \ \-----------------------------------------'
* | LAlt | LGUI |LOWER | / Del / \Enter \ |Space |RAISE | RGUI |
* | | | |/ / \ \ | | | |
* `----------------------------' '------''--------------------'
*/
[_RAISE] = LAYOUT(
KC_GRV, KC_EXLM, KC_AT, KC_HASH, KC_DLR, KC_PERC, KC_CIRC, KC_AMPR, KC_ASTR,KC_LPRN, KC_RPRN, KC_PLUS,
KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, _______, _______, _______, _______, _______, _______,
KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_LEFT, KC_DOWN, KC_UP, KC_RGHT, KC_PGUP, _______,
_______, _______, _______, _______, _______, _______, KC_LCBR, KC_RCBR, KC_HOME, KC_END, LALT(KC_LEFT), LALT(KC_RGHT), KC_PGDN, _______,
_______, _______, _______, KC_DEL, _______, _______, _______, _______
),
/* ADJUST
* ,-----------------------------------------. ,-----------------------------------------.
* | | | | | | | | | | | | | |
* |------+------+------+------+------+------| |------+------+------+------+------+------|
* | | | | | | | | | | | | | |
* |------+------+------+------+------+------| |------+------+------+------+------+------|
* | | | | | | |-------. ,-------| | |RGB ON| HUE+ | SAT+ | VAL+ |
* |------+------+------+------+------+------| | | |------+------+------+------+------+------|
* | | | | | | |-------| |-------| | | MODE | HUE- | SAT- | VAL- |
* `-----------------------------------------/ / \ \-----------------------------------------'
* | LAlt | LGUI |LOWER | /BackSP / \Enter \ |Space |RAISE | RGUI |
* | | | |/ / \ \ | | | |
* `----------------------------' '------''--------------------'
*/
[_ADJUST] = LAYOUT(
XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX,
XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX,
XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, RGB_TOG, RGB_HUI, RGB_SAI, RGB_VAI,
XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, RGB_MOD, RGB_HUD, RGB_SAD, RGB_VAD,
_______, _______, _______, _______, _______, _______, _______, _______
)
};
int RGB_current_mode;
// Setting ADJUST layer RGB back to default
void update_tri_layer_RGB(uint8_t layer1, uint8_t layer2, uint8_t layer3) {
if (IS_LAYER_ON(layer1) && IS_LAYER_ON(layer2)) {
layer_on(layer3);
} else {
layer_off(layer3);
}
}
void matrix_init_user(void) {
#ifdef RGBLIGHT_ENABLE
RGB_current_mode = rgblight_config.mode;
#endif
//SSD1306 OLED init, make sure to add #define SSD1306OLED in config.h
#ifdef SSD1306OLED
iota_gfx_init(!has_usb()); // turns on the display
#endif
}
//SSD1306 OLED update loop, make sure to add #define SSD1306OLED in config.h
#ifdef SSD1306OLED
// When add source files to SRC in rules.mk, you can use functions.
const char *read_layer_state(void);
const char *read_logo(void);
void set_keylog(uint16_t keycode, keyrecord_t *record);
const char *read_keylog(void);
const char *read_keylogs(void);
// const char *read_mode_icon(bool swap);
// const char *read_host_led_state(void);
// void set_timelog(void);
// const char *read_timelog(void);
void matrix_scan_user(void) {
iota_gfx_task();
}
void matrix_render_user(struct CharacterMatrix *matrix) {
if (is_master) {
// If you want to change the display of OLED, you need to change here
matrix_write_ln(matrix, read_layer_state());
matrix_write_ln(matrix, read_keylog());
matrix_write_ln(matrix, read_keylogs());
//matrix_write_ln(matrix, read_mode_icon(keymap_config.swap_lalt_lgui));
//matrix_write_ln(matrix, read_host_led_state());
//matrix_write_ln(matrix, read_timelog());
} else {
matrix_write(matrix, read_logo());
}
}
void matrix_update(struct CharacterMatrix *dest, const struct CharacterMatrix *source) {
if (memcmp(dest->display, source->display, sizeof(dest->display))) {
memcpy(dest->display, source->display, sizeof(dest->display));
dest->dirty = true;
}
}
void iota_gfx_task_user(void) {
struct CharacterMatrix matrix;
matrix_clear(&matrix);
matrix_render_user(&matrix);
matrix_update(&display, &matrix);
}
#endif//SSD1306OLED
bool process_record_user(uint16_t keycode, keyrecord_t *record) {
if (record->event.pressed) {
#ifdef SSD1306OLED
set_keylog(keycode, record);
#endif
// set_timelog();
}
switch (keycode) {
case QWERTY:
if (record->event.pressed) {
set_single_persistent_default_layer(_QWERTY);
}
return false;
break;
case LOWER:
if (record->event.pressed) {
layer_on(_LOWER);
update_tri_layer_RGB(_LOWER, _RAISE, _ADJUST);
} else {
layer_off(_LOWER);
update_tri_layer_RGB(_LOWER, _RAISE, _ADJUST);
}
return false;
break;
case RAISE:
if (record->event.pressed) {
layer_on(_RAISE);
update_tri_layer_RGB(_LOWER, _RAISE, _ADJUST);
} else {
layer_off(_RAISE);
update_tri_layer_RGB(_LOWER, _RAISE, _ADJUST);
}
return false;
break;
case ADJUST:
if (record->event.pressed) {
layer_on(_ADJUST);
} else {
layer_off(_ADJUST);
}
return false;
break;
}
return true;
}