qmk_firmware/keyboards/rgbkb/pan/rules.mk
Legonut abf1902ff5
[Keyboard] RGBKB Pan (#9587)
* Add new keyboard Pan

Encoder switches still need work

* New keyboard Pan

Should be complete

* Split MCU selection into 2 revision folders

* [rgbkb/pan] Make requested changes for PR

Additionally, set DEFAULT_FOLDER to rev1, and default rev1
 to atmega32a (as all shipped kits include an atmega32a)

* Apply suggestions from code review

* Fix default keymap typo

* add usb max power define

* Commit suggested changes

* Update keyboards/rgbkb/pan/config.h

* Apply suggestions from code review

Small copyright updates

* Apply suggestions from code review
2020-11-09 22:22:22 -08:00

26 lines
1.0 KiB
Makefile

# Build Options
# change yes to no to disable
#
BOOTMAGIC_ENABLE = lite # Virtual DIP switch configuration
MOUSEKEY_ENABLE = no # Mouse keys
EXTRAKEY_ENABLE = yes # Audio control and System control
CONSOLE_ENABLE = no # Console for debug
COMMAND_ENABLE = no # Commands for debug and configuration
# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
NKRO_ENABLE = no # USB Nkey Rollover
BLUETOOTH_ENABLE = no # Enable Bluetooth
AUDIO_ENABLE = no # Audio output
RGB_MATRIX_ENABLE = WS2812
WS2812_DRIVER = bitbang
ENCODER_ENABLE = yes
OLED_DRIVER_ENABLE = yes
# RGB layout selection
RGB_ENCODERS = yes # For RGB encoders, solder on both WS2811 chips
STAGGERED_LAYOUT = no # If you soldered R1-A12 and R4-A12, enable this.
# Default to revision 1
DEFAULT_FOLDER = rgbkb/pan/rev1