alvierahman90/qmk_firmware
1
0
Fork 0
Code Issues Pull Requests Projects Releases Wiki Activity
d9fe855923
qmk_firmware/keyboards/vinta
History
Krishna Mani f5fe6fe5cc
[Keyboard] Add akegata denki device one (#9690) 
* add device one

* fix layouts

* add other layouts

* column fixes, device id changes

* layouts cleanup, add readme

* add info.json, fix readme

* add template readme

* add smaller image

* fix image links, address requested changes

* Apply suggestions from code review

* Update keyboards/device_one/keymaps/ansi_split_backspace/keymap.c

* add akegata vendor folder

* Apply suggestions from code review
2020-07-27 18:40:57 -07:00
..
boards/GENERIC_STM32_F042X6 2020 February 29 Breaking Changes Update (#8064) 2020-02-29 11:59:30 -08:00
keymaps/default
bootloader_defs.h
chconf.h 2020 February 29 Breaking Changes Update (#8064) 2020-02-29 11:59:30 -08:00
config.h
halconf.h 2020 February 29 Breaking Changes Update (#8064) 2020-02-29 11:59:30 -08:00
info.json 65 ansi blocker everywhere (everywhere I can find) (#6805) 2019-09-25 12:55:27 -07:00
mcuconf.h Keyboard: Vinta (#4283) 2018-10-29 22:00:40 -07:00
readme.md Fix capitalisation of "GitHub" (#9184) 2020-05-25 19:43:14 -07:00
rules.mk Move CORTEX_ENABLE_WFI_IDLE=TRUE to rules.mk files. 2020-01-28 23:45:42 +11:00
vinta.c [Keyboard] Add akegata denki device one (#9690) 2020-07-27 18:40:57 -07:00
vinta.h 65 ansi blocker everywhere (everywhere I can find) (#6805) 2019-09-25 12:55:27 -07:00

readme.md

Vinta

Vinta

This is an ARM-powered 65% keyboard PCB with USB Mini B connector and breakout for optional RGB underglow.

Keyboard Maintainer: Peioris and on GitHub
Hardware Supported: Vinta with STM32F042K6T6
Hardware Availability: Private Groupbuy (will post on Reddit once QMK has RGB underglow working)

Make example for this keyboard (after setting up your build environment):

make vinta:default

See build environment setup then the make instructions for more information.

Developer's Note

STM32F042xx chips does not allow jumping to bootloader without BOOT0 being set to high, therefore it is impossible to enter the bootloader from sending a RESET keycode nor using bootmagic or bootmagic lite.
The only way to enter bootloader is to hold the BOOT0 button while the keyboard is powering up or after a power reset (done by pressing the reset switch or sending a RESET keycode).