qmk_firmware/quantum/light_ws2812.h
2016-11-13 23:02:38 -05:00

89 lines
2.2 KiB
C
Executable File
Raw Blame History

/*
* light weight WS2812 lib include
*
* Version 2.3 - Nev 29th 2015
* Author: Tim (cpldcpu@gmail.com)
*
* Please do not change this file! All configuration is handled in "ws2812_config.h"
*
* License: GNU GPL v2 (see License.txt)
+
*/
#ifndef LIGHT_WS2812_H_
#define LIGHT_WS2812_H_
#include <avr/io.h>
#include <avr/interrupt.h>
//#include "ws2812_config.h"
#include "i2cmaster.h"
#define LIGHT_I2C 1
#define LIGHT_I2C_ADDR 0x84
#define LIGHT_I2C_ADDR_WRITE ( (LIGHT_I2C_ADDR<<1) | I2C_WRITE )
#define LIGHT_I2C_ADDR_READ ( (LIGHT_I2C_ADDR<<1) | I2C_READ )
#define RGBW 1
#ifdef RGBW
#define LED_TYPE struct cRGBW
#else
#define LED_TYPE struct cRGB
#endif
/*
* Structure of the LED array
*
* cRGB: RGB for WS2812S/B/C/D, SK6812, SK6812Mini, SK6812WWA, APA104, APA106
* cRGBW: RGBW for SK6812RGBW
*/
struct cRGB { uint8_t g; uint8_t r; uint8_t b; };
struct cRGBW { uint8_t g; uint8_t r; uint8_t b; uint8_t w;};
/* User Interface
*
* Input:
* ledarray: An array of GRB data describing the LED colors
* number_of_leds: The number of LEDs to write
* pinmask (optional): Bitmask describing the output bin. e.g. _BV(PB0)
*
* The functions will perform the following actions:
* - Set the data-out pin as output
* - Send out the LED data
* - Wait 50<35>s to reset the LEDs
*/
void ws2812_setleds (LED_TYPE *ledarray, uint16_t number_of_leds);
void ws2812_setleds_pin (LED_TYPE *ledarray, uint16_t number_of_leds,uint8_t pinmask);
void ws2812_setleds_rgbw(LED_TYPE *ledarray, uint16_t number_of_leds);
/*
* Old interface / Internal functions
*
* The functions take a byte-array and send to the data output as WS2812 bitstream.
* The length is the number of bytes to send - three per LED.
*/
void ws2812_sendarray (uint8_t *array,uint16_t length);
void ws2812_sendarray_mask(uint8_t *array,uint16_t length, uint8_t pinmask);
/*
* Internal defines
*/
#ifndef CONCAT
#define CONCAT(a, b) a ## b
#endif
#ifndef CONCAT_EXP
#define CONCAT_EXP(a, b) CONCAT(a, b)
#endif
// #define ws2812_PORTREG CONCAT_EXP(PORT,ws2812_port)
// #define ws2812_DDRREG CONCAT_EXP(DDR,ws2812_port)
#endif /* LIGHT_WS2812_H_ */