qmk_firmware/keyboards/mechlovin/hex6c
Ryan 9dcd03b6ca
Set BOOTLOADER = stm32-dfu for all applicable STM32 boards (#12956)
* Set bootloader to stm32-dfu for STM32F303

* Set bootloader to stm32-dfu for STM32F0x2

* Set bootloader to stm32-dfu for STM32F4x1

* Set bootloader to stm32duino for sowbug

* Delete redundant bootloader_defs headers

* Add some missing MCU name comments

* Move APM32 dfu-suffix overrides underneath bootloader

* Remove redundant STM32_BOOTLOADER_ADDRESS defines/rules
2021-06-08 19:48:46 +10:00
..
keymaps
config.h
hex6c.c
hex6c.h
info.json
readme.md
rules.mk Set BOOTLOADER = stm32-dfu for all applicable STM32 boards (#12956) 2021-06-08 19:48:46 +10:00

hex6c

hex6c

A Southpaw Fullsize Keyboard with encoder.

Make example for this keyboard (after setting up your build environment):

make mechlovin/hex6c:default

Flashing example for this keyboard:

make mechlovin/hex6c:default:flash

See the build environment setup and the make instructions for more information. Brand new to QMK? Start with our Complete Newbs Guide.

Reset Key: To put the Hex6C into bootloader, hold esc key while plugging in (bootmagic) or push reset swith on the bottom of the PCB.