2018-09-28 16:33:11 +00:00
|
|
|
/* Copyright 2016-2018 Erez Zukerman, Jack Humbert, Yiancar
|
2017-03-28 22:20:36 +00:00
|
|
|
*
|
|
|
|
|
* This program is free software: you can redistribute it and/or modify
|
|
|
|
|
* it under the terms of the GNU General Public License as published by
|
|
|
|
|
* the Free Software Foundation, either version 2 of the License, or
|
|
|
|
|
* (at your option) any later version.
|
|
|
|
|
*
|
|
|
|
|
* This program is distributed in the hope that it will be useful,
|
|
|
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
|
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
|
|
|
* GNU General Public License for more details.
|
|
|
|
|
*
|
|
|
|
|
* You should have received a copy of the GNU General Public License
|
|
|
|
|
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
|
|
|
|
*/
|
2019-07-09 18:16:24 +00:00
|
|
|
#pragma once
|
2016-05-15 04:27:32 +00:00
|
|
|
|
Add ChibiOS support for QMK (#465)
* Modularity and gcc warnings fixes.
* Add ChibiOS support (USB stack + support files).
* Make usb_main more USB_DRIVER #define independent.
* Move chibios to tool.
* Implement jump-to-bootloader.
* Small updates.
* Fix bootloader-jump compiling.
* Move AVR specific sleep_led.c into avr.
* Add basic sleep_led for chibios.
* Update chibios README.
* NKRO fixes.
* Rename some Makefile defines.
* Move STM32 bootloader address config to separate .h file.
* Add ARM Teensies bootloader code.
* Fix chibios/usb_main GET_REPORT handing.
* Add missing #include to keymap.c.
* Make bootmagic.c code portable (_delay_ms -> wait_ms).
* Move declaration of keymap_config.
Should really not declare variables in .h files - since it's included
in different .c files, a proper linker then complains that the same
variable is declared more than once (once for each .c file that the
offending .h is included in).
* Add eeprom support for chibios/kinetis.
* Rename chibios example keyboard.
* Move chibios/cortex selection to local Makefiles.
* Chibios: use WFI in idle. WIP suspend stuff.
* ChibiOS/kinetis: sending remote wakeup.
* ChibiOS/STM32: send remote wakeup.
* Fix report size of boot protocol.
* Fix drop key stroke
Keyboard report should be checked if its transfer finishs successfully.
Otherwise key stroke can be missing when other key event occurs
before the last report transfer is done.
Boot protocol 10ms interval probably causes this problem in case
it receives key events in a row within the period. NKRO protocol
suffers less or nothing due to its interval 1ms.
* Chibios/usb_main: rename a variable for clarity.
* Add correct chibios/bootloader_jump for infinity KB.
* ChibiOS: make reset request more CMSISy.
* Chibios: Add breathing sleep LED on Kinetis MCUs.
* ChibiOS: Update infinity bootloader code to match updated ChibiOS.
* ChibiOS: prettify/document sleep_led code.
* Chibios: Remove the wait in the main loop.
* Add maple mini code.
* Do timeout when writing to CONSOLE EP queue.
Fixes TMK bug #266.
* Chibios: add 'core/protocol' to the makefiles' search path.
* Chibios: Update to new USB API.
* Chibios: add more guards for transmitting (fix a deadlock bug).
* Add update for chibios in README
* Chibios: Fix a HardFault bug (wait after start).
* Chibios: cleanup usb_main code.
* Chibios: Revert common.mk change (fix AVR linking problem).
* core: Fix chibios user compile options
Compile options can be defined in project Makefile such as UDEFS, UADEFS, UINCDIR, ULIBDIR and ULIBS.
* Sysv format for ChibiOS arm-none-eabi-size
Some new patches to ChibiOS puts heap as it's own section. So the
berkeley format is now useless, as the heap will be included in the
BSS report. The sysv format displays the bss size correctly.
* Fix hard-coded path of CHIBIOS
* Add support for new version of ChibiOS and Contrib
The Kinetis support has moved to a separate Contrib repository in
the newest version of Chibios. There has also been some structure
changes. So this adds support for those, while maintaining back-
wards compability.
* Update ChibiOS instructions
* Chibios: implement sleep LED for STM32.
* Chibios: Update the main chibios README.
* Chibios: fix STM32_BOOTLOADER_ADDRESS name.
* Chibios: make the default bootloader_jump redefinable (weak).
* Chibios: disable LTO (link-time optimisation).
With LTO enabled, sometimes things fail for mysterious reasons
(e.g. bootloader jump on WF with LEDs enabled), just because the
linker optimisation is too aggressive.
* Chibios: add default location for chibios-contrib.
* ChibiOS: update mk to match chibios/master.
* ChibiOS: update instructions.md.
* Add chibi_onekey example.
* Add comments to chibi_onekey Makefile.
* Rename some Makefile defines.
* Move STM32 bootloader address config to separate .h file.
* Rename chibios example keyboard.
* Move chibios/cortex selection to local Makefiles.
* Add Teensy LC onekey example.
* Chibios: use WFI in idle. WIP suspend stuff.
* Update chibi/teensy instructions.
* Update chibios/Teensy instructions.
* Add infinity_chibios
* Add keymap_hasu.c
* Infinity_chibios: select correct bootloader_jump.
* Infinity_chibios: improve comments.
* Add generic STM32F103C8T6 example.
* Add maple mini code.
* STM32F103x fixes.
* Add maple mini pinout pic.
* Chibios: updates for 3.0.4 git.
* Chibios: rename example stm32_onekey -> stm32_f072_onekey.
* Chibios: add makefiles for Teensy 3.x examples.
* Chibios: update Teensy 3.x instructions.
* Chibios: Tsy LC is cortex-m0plus.
* Chibios: add more guards for transmitting (fix a deadlock bug).
* Change README for chibios
* Chibios: update examples to current chibios git.
Match the changes in mainline chibios:
- update chconf.h
- update supplied ld scripts structure
- update Teensy instructions (switch to official
chibios and introduce contrib)
* Add ChibiOS and ChibiOS-Contrib submodules
Also fix the makefile path for them.
* Moves chibios keyboards to keyboards folder
* First version of ChibiOS compilation
Only the stm32_f072_onkey keyboard is ported at the moment. It
compiles, but still doesn't link.
* More chibios fixes
It now compiles without warnings and links
* Move the teensy_lc_onekey to the keyboards folder
* Clean up the make file rule structure
* Remove keymap_fn_to_action
* Update more ChibiOS keyboards to QMK
Most of them does not compile at the moment though.
* Use older version of Chibios libraries
The newest ones have problems with compilation
* Remove USB_UNCONFIGURED event
It isn't present in the older version of ChibiOS
* Fix the infinity_chibios compilation
* Fix potentially uninitialized variable
* Add missing include
* Fix the ChibiOS makefile
* Fix some Chibios keyboard compilation
* Revert the rules.mk file back to master version
* Combine the chibios and AVR makefiles
With just the required overrides in the respective platform
specific one.
* Slight makefile restrucuring
Platform specific compiler options
* Move avr specific targets out of the main rules
* Fix ChibiOS objcopy
The ChibiOS objcopy needs different parameters, so the parameters
are moved to the corresponding platform rule file
* Fix the objcopy for real this time
The comands were moved around, so chibios used avr and the ohter
way around.
Also change the objsize output format
* Fix the thumb flags
* Fix the infinity hasu keymap
* Per platform cpp flags
* Add gcc-arm-none-eabi package to travis
* Add arm-none-eabi-newlib to travis
* Fix the name of the libnewlib-arm-none-eabi lib
* Fix the ChibiOS paths
So that they are properly relative, and builds don't generate
extra folders
* Fix the board path of stm32_f103_onekey
* Only consider folders with Makefiles as subproject
2016-07-01 14:04:53 +00:00
|
|
|
#if defined(__AVR__)
|
2019-08-30 18:19:03 +00:00
|
|
|
# include <avr/pgmspace.h>
|
|
|
|
|
# include <avr/io.h>
|
|
|
|
|
# include <avr/interrupt.h>
|
2018-09-28 16:33:11 +00:00
|
|
|
#endif
|
|
|
|
|
#if defined(PROTOCOL_CHIBIOS)
|
2020-12-11 02:45:24 +00:00
|
|
|
# include <hal.h>
|
2019-12-21 18:22:49 +00:00
|
|
|
# include "chibios_config.h"
|
Add ChibiOS support for QMK (#465)
* Modularity and gcc warnings fixes.
* Add ChibiOS support (USB stack + support files).
* Make usb_main more USB_DRIVER #define independent.
* Move chibios to tool.
* Implement jump-to-bootloader.
* Small updates.
* Fix bootloader-jump compiling.
* Move AVR specific sleep_led.c into avr.
* Add basic sleep_led for chibios.
* Update chibios README.
* NKRO fixes.
* Rename some Makefile defines.
* Move STM32 bootloader address config to separate .h file.
* Add ARM Teensies bootloader code.
* Fix chibios/usb_main GET_REPORT handing.
* Add missing #include to keymap.c.
* Make bootmagic.c code portable (_delay_ms -> wait_ms).
* Move declaration of keymap_config.
Should really not declare variables in .h files - since it's included
in different .c files, a proper linker then complains that the same
variable is declared more than once (once for each .c file that the
offending .h is included in).
* Add eeprom support for chibios/kinetis.
* Rename chibios example keyboard.
* Move chibios/cortex selection to local Makefiles.
* Chibios: use WFI in idle. WIP suspend stuff.
* ChibiOS/kinetis: sending remote wakeup.
* ChibiOS/STM32: send remote wakeup.
* Fix report size of boot protocol.
* Fix drop key stroke
Keyboard report should be checked if its transfer finishs successfully.
Otherwise key stroke can be missing when other key event occurs
before the last report transfer is done.
Boot protocol 10ms interval probably causes this problem in case
it receives key events in a row within the period. NKRO protocol
suffers less or nothing due to its interval 1ms.
* Chibios/usb_main: rename a variable for clarity.
* Add correct chibios/bootloader_jump for infinity KB.
* ChibiOS: make reset request more CMSISy.
* Chibios: Add breathing sleep LED on Kinetis MCUs.
* ChibiOS: Update infinity bootloader code to match updated ChibiOS.
* ChibiOS: prettify/document sleep_led code.
* Chibios: Remove the wait in the main loop.
* Add maple mini code.
* Do timeout when writing to CONSOLE EP queue.
Fixes TMK bug #266.
* Chibios: add 'core/protocol' to the makefiles' search path.
* Chibios: Update to new USB API.
* Chibios: add more guards for transmitting (fix a deadlock bug).
* Add update for chibios in README
* Chibios: Fix a HardFault bug (wait after start).
* Chibios: cleanup usb_main code.
* Chibios: Revert common.mk change (fix AVR linking problem).
* core: Fix chibios user compile options
Compile options can be defined in project Makefile such as UDEFS, UADEFS, UINCDIR, ULIBDIR and ULIBS.
* Sysv format for ChibiOS arm-none-eabi-size
Some new patches to ChibiOS puts heap as it's own section. So the
berkeley format is now useless, as the heap will be included in the
BSS report. The sysv format displays the bss size correctly.
* Fix hard-coded path of CHIBIOS
* Add support for new version of ChibiOS and Contrib
The Kinetis support has moved to a separate Contrib repository in
the newest version of Chibios. There has also been some structure
changes. So this adds support for those, while maintaining back-
wards compability.
* Update ChibiOS instructions
* Chibios: implement sleep LED for STM32.
* Chibios: Update the main chibios README.
* Chibios: fix STM32_BOOTLOADER_ADDRESS name.
* Chibios: make the default bootloader_jump redefinable (weak).
* Chibios: disable LTO (link-time optimisation).
With LTO enabled, sometimes things fail for mysterious reasons
(e.g. bootloader jump on WF with LEDs enabled), just because the
linker optimisation is too aggressive.
* Chibios: add default location for chibios-contrib.
* ChibiOS: update mk to match chibios/master.
* ChibiOS: update instructions.md.
* Add chibi_onekey example.
* Add comments to chibi_onekey Makefile.
* Rename some Makefile defines.
* Move STM32 bootloader address config to separate .h file.
* Rename chibios example keyboard.
* Move chibios/cortex selection to local Makefiles.
* Add Teensy LC onekey example.
* Chibios: use WFI in idle. WIP suspend stuff.
* Update chibi/teensy instructions.
* Update chibios/Teensy instructions.
* Add infinity_chibios
* Add keymap_hasu.c
* Infinity_chibios: select correct bootloader_jump.
* Infinity_chibios: improve comments.
* Add generic STM32F103C8T6 example.
* Add maple mini code.
* STM32F103x fixes.
* Add maple mini pinout pic.
* Chibios: updates for 3.0.4 git.
* Chibios: rename example stm32_onekey -> stm32_f072_onekey.
* Chibios: add makefiles for Teensy 3.x examples.
* Chibios: update Teensy 3.x instructions.
* Chibios: Tsy LC is cortex-m0plus.
* Chibios: add more guards for transmitting (fix a deadlock bug).
* Change README for chibios
* Chibios: update examples to current chibios git.
Match the changes in mainline chibios:
- update chconf.h
- update supplied ld scripts structure
- update Teensy instructions (switch to official
chibios and introduce contrib)
* Add ChibiOS and ChibiOS-Contrib submodules
Also fix the makefile path for them.
* Moves chibios keyboards to keyboards folder
* First version of ChibiOS compilation
Only the stm32_f072_onkey keyboard is ported at the moment. It
compiles, but still doesn't link.
* More chibios fixes
It now compiles without warnings and links
* Move the teensy_lc_onekey to the keyboards folder
* Clean up the make file rule structure
* Remove keymap_fn_to_action
* Update more ChibiOS keyboards to QMK
Most of them does not compile at the moment though.
* Use older version of Chibios libraries
The newest ones have problems with compilation
* Remove USB_UNCONFIGURED event
It isn't present in the older version of ChibiOS
* Fix the infinity_chibios compilation
* Fix potentially uninitialized variable
* Add missing include
* Fix the ChibiOS makefile
* Fix some Chibios keyboard compilation
* Revert the rules.mk file back to master version
* Combine the chibios and AVR makefiles
With just the required overrides in the respective platform
specific one.
* Slight makefile restrucuring
Platform specific compiler options
* Move avr specific targets out of the main rules
* Fix ChibiOS objcopy
The ChibiOS objcopy needs different parameters, so the parameters
are moved to the corresponding platform rule file
* Fix the objcopy for real this time
The comands were moved around, so chibios used avr and the ohter
way around.
Also change the objsize output format
* Fix the thumb flags
* Fix the infinity hasu keymap
* Per platform cpp flags
* Add gcc-arm-none-eabi package to travis
* Add arm-none-eabi-newlib to travis
* Fix the name of the libnewlib-arm-none-eabi lib
* Fix the ChibiOS paths
So that they are properly relative, and builds don't generate
extra folders
* Fix the board path of stm32_f103_onekey
* Only consider folders with Makefiles as subproject
2016-07-01 14:04:53 +00:00
|
|
|
#endif
|
2019-07-09 18:16:24 +00:00
|
|
|
|
Add ChibiOS support for QMK (#465)
* Modularity and gcc warnings fixes.
* Add ChibiOS support (USB stack + support files).
* Make usb_main more USB_DRIVER #define independent.
* Move chibios to tool.
* Implement jump-to-bootloader.
* Small updates.
* Fix bootloader-jump compiling.
* Move AVR specific sleep_led.c into avr.
* Add basic sleep_led for chibios.
* Update chibios README.
* NKRO fixes.
* Rename some Makefile defines.
* Move STM32 bootloader address config to separate .h file.
* Add ARM Teensies bootloader code.
* Fix chibios/usb_main GET_REPORT handing.
* Add missing #include to keymap.c.
* Make bootmagic.c code portable (_delay_ms -> wait_ms).
* Move declaration of keymap_config.
Should really not declare variables in .h files - since it's included
in different .c files, a proper linker then complains that the same
variable is declared more than once (once for each .c file that the
offending .h is included in).
* Add eeprom support for chibios/kinetis.
* Rename chibios example keyboard.
* Move chibios/cortex selection to local Makefiles.
* Chibios: use WFI in idle. WIP suspend stuff.
* ChibiOS/kinetis: sending remote wakeup.
* ChibiOS/STM32: send remote wakeup.
* Fix report size of boot protocol.
* Fix drop key stroke
Keyboard report should be checked if its transfer finishs successfully.
Otherwise key stroke can be missing when other key event occurs
before the last report transfer is done.
Boot protocol 10ms interval probably causes this problem in case
it receives key events in a row within the period. NKRO protocol
suffers less or nothing due to its interval 1ms.
* Chibios/usb_main: rename a variable for clarity.
* Add correct chibios/bootloader_jump for infinity KB.
* ChibiOS: make reset request more CMSISy.
* Chibios: Add breathing sleep LED on Kinetis MCUs.
* ChibiOS: Update infinity bootloader code to match updated ChibiOS.
* ChibiOS: prettify/document sleep_led code.
* Chibios: Remove the wait in the main loop.
* Add maple mini code.
* Do timeout when writing to CONSOLE EP queue.
Fixes TMK bug #266.
* Chibios: add 'core/protocol' to the makefiles' search path.
* Chibios: Update to new USB API.
* Chibios: add more guards for transmitting (fix a deadlock bug).
* Add update for chibios in README
* Chibios: Fix a HardFault bug (wait after start).
* Chibios: cleanup usb_main code.
* Chibios: Revert common.mk change (fix AVR linking problem).
* core: Fix chibios user compile options
Compile options can be defined in project Makefile such as UDEFS, UADEFS, UINCDIR, ULIBDIR and ULIBS.
* Sysv format for ChibiOS arm-none-eabi-size
Some new patches to ChibiOS puts heap as it's own section. So the
berkeley format is now useless, as the heap will be included in the
BSS report. The sysv format displays the bss size correctly.
* Fix hard-coded path of CHIBIOS
* Add support for new version of ChibiOS and Contrib
The Kinetis support has moved to a separate Contrib repository in
the newest version of Chibios. There has also been some structure
changes. So this adds support for those, while maintaining back-
wards compability.
* Update ChibiOS instructions
* Chibios: implement sleep LED for STM32.
* Chibios: Update the main chibios README.
* Chibios: fix STM32_BOOTLOADER_ADDRESS name.
* Chibios: make the default bootloader_jump redefinable (weak).
* Chibios: disable LTO (link-time optimisation).
With LTO enabled, sometimes things fail for mysterious reasons
(e.g. bootloader jump on WF with LEDs enabled), just because the
linker optimisation is too aggressive.
* Chibios: add default location for chibios-contrib.
* ChibiOS: update mk to match chibios/master.
* ChibiOS: update instructions.md.
* Add chibi_onekey example.
* Add comments to chibi_onekey Makefile.
* Rename some Makefile defines.
* Move STM32 bootloader address config to separate .h file.
* Rename chibios example keyboard.
* Move chibios/cortex selection to local Makefiles.
* Add Teensy LC onekey example.
* Chibios: use WFI in idle. WIP suspend stuff.
* Update chibi/teensy instructions.
* Update chibios/Teensy instructions.
* Add infinity_chibios
* Add keymap_hasu.c
* Infinity_chibios: select correct bootloader_jump.
* Infinity_chibios: improve comments.
* Add generic STM32F103C8T6 example.
* Add maple mini code.
* STM32F103x fixes.
* Add maple mini pinout pic.
* Chibios: updates for 3.0.4 git.
* Chibios: rename example stm32_onekey -> stm32_f072_onekey.
* Chibios: add makefiles for Teensy 3.x examples.
* Chibios: update Teensy 3.x instructions.
* Chibios: Tsy LC is cortex-m0plus.
* Chibios: add more guards for transmitting (fix a deadlock bug).
* Change README for chibios
* Chibios: update examples to current chibios git.
Match the changes in mainline chibios:
- update chconf.h
- update supplied ld scripts structure
- update Teensy instructions (switch to official
chibios and introduce contrib)
* Add ChibiOS and ChibiOS-Contrib submodules
Also fix the makefile path for them.
* Moves chibios keyboards to keyboards folder
* First version of ChibiOS compilation
Only the stm32_f072_onkey keyboard is ported at the moment. It
compiles, but still doesn't link.
* More chibios fixes
It now compiles without warnings and links
* Move the teensy_lc_onekey to the keyboards folder
* Clean up the make file rule structure
* Remove keymap_fn_to_action
* Update more ChibiOS keyboards to QMK
Most of them does not compile at the moment though.
* Use older version of Chibios libraries
The newest ones have problems with compilation
* Remove USB_UNCONFIGURED event
It isn't present in the older version of ChibiOS
* Fix the infinity_chibios compilation
* Fix potentially uninitialized variable
* Add missing include
* Fix the ChibiOS makefile
* Fix some Chibios keyboard compilation
* Revert the rules.mk file back to master version
* Combine the chibios and AVR makefiles
With just the required overrides in the respective platform
specific one.
* Slight makefile restrucuring
Platform specific compiler options
* Move avr specific targets out of the main rules
* Fix ChibiOS objcopy
The ChibiOS objcopy needs different parameters, so the parameters
are moved to the corresponding platform rule file
* Fix the objcopy for real this time
The comands were moved around, so chibios used avr and the ohter
way around.
Also change the objsize output format
* Fix the thumb flags
* Fix the infinity hasu keymap
* Per platform cpp flags
* Add gcc-arm-none-eabi package to travis
* Add arm-none-eabi-newlib to travis
* Fix the name of the libnewlib-arm-none-eabi lib
* Fix the ChibiOS paths
So that they are properly relative, and builds don't generate
extra folders
* Fix the board path of stm32_f103_onekey
* Only consider folders with Makefiles as subproject
2016-07-01 14:04:53 +00:00
|
|
|
#include "wait.h"
|
2016-05-15 04:27:32 +00:00
|
|
|
#include "matrix.h"
|
2016-06-18 18:30:24 +00:00
|
|
|
#include "keymap.h"
|
2019-07-09 18:16:24 +00:00
|
|
|
|
2016-05-15 04:27:32 +00:00
|
|
|
#ifdef BACKLIGHT_ENABLE
|
2019-08-30 18:19:03 +00:00
|
|
|
# ifdef LED_MATRIX_ENABLE
|
2020-11-28 20:02:18 +00:00
|
|
|
# include "led_matrix.h"
|
2019-08-30 18:19:03 +00:00
|
|
|
# else
|
|
|
|
|
# include "backlight.h"
|
|
|
|
|
# endif
|
2016-05-15 04:27:32 +00:00
|
|
|
#endif
|
2019-07-09 18:16:24 +00:00
|
|
|
|
|
|
|
|
#if defined(RGBLIGHT_ENABLE)
|
2019-08-30 18:19:03 +00:00
|
|
|
# include "rgblight.h"
|
2019-07-09 18:16:24 +00:00
|
|
|
#elif defined(RGB_MATRIX_ENABLE)
|
2019-08-30 18:19:03 +00:00
|
|
|
// Dummy define RGBLIGHT_MODE_xxxx
|
|
|
|
|
# define RGBLIGHT_H_DUMMY_DEFINE
|
|
|
|
|
# include "rgblight.h"
|
2016-05-15 04:27:32 +00:00
|
|
|
#endif
|
Lets split eh (#3120)
* Line ending stuff again
* Added Let's Split Eh? Files and updated #USE_IC2 checks to also include th EH revision (can only be used in I2C)
* Added personal keymap, updated some of the EH files
* Created new keyboard file for testing "lets_split_eh" will merge into lets_split once fully functional
* Added split code from lets_split, removed pro micro imports and LED code
THIS IS WORKING CODE, WITHOUT RGB AND BACKLIGHT
* Took back original Lets Slit files for the lets_split keyboard, working in the lets_split_eh folder for now
* Updated eh.c
* More rework of the I2C code, added global flags for split boards.
* Introduced RGB over I2C, having weird edge case issues at the moment though
* Fixed weird I2C edgecase with RGB, although still would like to track down route cause..
* Changed RGB keycodes (static ones) to activate on key-up instead of key-down to elimate weird ghosting issue over I2C
* Lots of changes, mainly externalized the Split keyboard code and added logic for only including when needed.
- Added makefile option "SPLIT_KEYBOARD" that when = yes will include the split keyboard files and custom matrix
- Split keyboard files placed into quantum/split_common/
- Added define option for config files "SPLIT_HAND_PIN" FOr using high/low pin to determine handedness, low = right hand, high = left hand
- Cleaned up split logic for RGB and Backlight so it is only exectuted / included when needed
* Updated documentation for the new makefile options and #defines specific to split keyboards
* Added a bit more info to docs, so people aren't confused
* Modifed Let's Split to use externalized code, also added left and right hand eeprom files to the split_common folder
* Removed some debugging from eh.c
* Small changes to keyboard configs. Also added a default keymap (just a copy of my that_canadian keymap).
* Added a README file to the Let's Split Eh?
* Changed it so RGB static updates are done on key-up ONLY for split boards rather than all boards. Also fixed leftover un-used variable in rgblight.c
* Updated default keymap and my keymap for Let's Split Eh? Updated the comments so it reflects RGB control, and removed audio functions.
* Fixed lets_split_eh not having a default version
* Removed "eh" references from lets_split folder for now
* Took lets_split folder from master to fix travis build errors, weird my local was overriding.
* Changed LAYOUT_ortho_4x12_kc -> LAYOUT_kc_ortho_4x12 to match bakingpy and others
* Removed rules.mk from my lets_split keymap, not needed
* Updated the config_options doc to better explain the usage of "#define SPLIT_HAND_PIN"
2018-07-17 02:25:02 +00:00
|
|
|
|
2018-05-08 19:24:18 +00:00
|
|
|
#ifdef RGB_MATRIX_ENABLE
|
2019-08-30 18:19:03 +00:00
|
|
|
# include "rgb_matrix.h"
|
2018-05-08 19:24:18 +00:00
|
|
|
#endif
|
Lets split eh (#3120)
* Line ending stuff again
* Added Let's Split Eh? Files and updated #USE_IC2 checks to also include th EH revision (can only be used in I2C)
* Added personal keymap, updated some of the EH files
* Created new keyboard file for testing "lets_split_eh" will merge into lets_split once fully functional
* Added split code from lets_split, removed pro micro imports and LED code
THIS IS WORKING CODE, WITHOUT RGB AND BACKLIGHT
* Took back original Lets Slit files for the lets_split keyboard, working in the lets_split_eh folder for now
* Updated eh.c
* More rework of the I2C code, added global flags for split boards.
* Introduced RGB over I2C, having weird edge case issues at the moment though
* Fixed weird I2C edgecase with RGB, although still would like to track down route cause..
* Changed RGB keycodes (static ones) to activate on key-up instead of key-down to elimate weird ghosting issue over I2C
* Lots of changes, mainly externalized the Split keyboard code and added logic for only including when needed.
- Added makefile option "SPLIT_KEYBOARD" that when = yes will include the split keyboard files and custom matrix
- Split keyboard files placed into quantum/split_common/
- Added define option for config files "SPLIT_HAND_PIN" FOr using high/low pin to determine handedness, low = right hand, high = left hand
- Cleaned up split logic for RGB and Backlight so it is only exectuted / included when needed
* Updated documentation for the new makefile options and #defines specific to split keyboards
* Added a bit more info to docs, so people aren't confused
* Modifed Let's Split to use externalized code, also added left and right hand eeprom files to the split_common folder
* Removed some debugging from eh.c
* Small changes to keyboard configs. Also added a default keymap (just a copy of my that_canadian keymap).
* Added a README file to the Let's Split Eh?
* Changed it so RGB static updates are done on key-up ONLY for split boards rather than all boards. Also fixed leftover un-used variable in rgblight.c
* Updated default keymap and my keymap for Let's Split Eh? Updated the comments so it reflects RGB control, and removed audio functions.
* Fixed lets_split_eh not having a default version
* Removed "eh" references from lets_split folder for now
* Took lets_split folder from master to fix travis build errors, weird my local was overriding.
* Changed LAYOUT_ortho_4x12_kc -> LAYOUT_kc_ortho_4x12 to match bakingpy and others
* Removed rules.mk from my lets_split keymap, not needed
* Updated the config_options doc to better explain the usage of "#define SPLIT_HAND_PIN"
2018-07-17 02:25:02 +00:00
|
|
|
|
2016-05-15 04:27:32 +00:00
|
|
|
#include "action_layer.h"
|
|
|
|
|
#include "eeconfig.h"
|
2016-06-18 18:30:24 +00:00
|
|
|
#include "bootloader.h"
|
|
|
|
|
#include "timer.h"
|
2020-12-01 18:04:42 +00:00
|
|
|
#include "sync_timer.h"
|
2016-06-24 02:18:20 +00:00
|
|
|
#include "config_common.h"
|
|
|
|
|
#include "led.h"
|
|
|
|
|
#include "action_util.h"
|
2021-01-05 00:37:20 +00:00
|
|
|
#include "action_tapping.h"
|
2016-07-08 21:41:15 +00:00
|
|
|
#include "print.h"
|
2017-09-12 04:43:10 +00:00
|
|
|
#include "send_string_keycodes.h"
|
2018-08-04 20:49:10 +00:00
|
|
|
#include "suspend.h"
|
2019-07-09 18:16:24 +00:00
|
|
|
#include <stddef.h>
|
|
|
|
|
#include <stdlib.h>
|
Moves features to their own files (process_*), adds tap dance feature (#460)
* non-working commit
* working
* subprojects implemented for planck
* pass a subproject variable through to c
* consolidates clueboard revisions
* thanks for letting me know about conflicts..
* turn off audio for yang's
* corrects starting paths for subprojects
* messing around with travis
* semicolon
* travis script
* travis script
* script for travis
* correct directory (probably), amend files to commit
* remove origin before adding
* git pull, correct syntax
* git checkout
* git pull origin branch
* where are we?
* where are we?
* merging
* force things to happen
* adds commit message, adds add
* rebase, no commit message
* rebase branch
* idk!
* try just pull
* fetch - merge
* specify repo branch
* checkout
* goddammit
* merge? idk
* pls
* after all
* don't split up keyboards
* syntax
* adds quick for all-keyboards
* trying out new script
* script update
* lowercase
* all keyboards
* stop replacing compiled.hex automatically
* adds if statement
* skip automated build branches
* forces push to automated build branch
* throw an add in there
* upstream?
* adds AUTOGEN
* ignore all .hex files again
* testing out new repo
* global ident
* generate script, keyboard_keymap.hex
* skip generation for now, print pandoc info, submodule update
* try trusty
* and sudo
* try generate
* updates subprojects to keyboards
* no idea
* updates to keyboards
* cleans up clueboard stuff
* setup to use local readme
* updates cluepad, planck experimental
* remove extra led.c [ci skip]
* audio and midi moved over to separate files
* chording, leader, unicode separated
* consolidate each [skip ci]
* correct include
* quantum: Add a tap dance feature (#451)
* quantum: Add a tap dance feature
With this feature one can specify keys that behave differently, based on
the amount of times they have been tapped, and when interrupted, they
get handled before the interrupter.
To make it clear how this is different from `ACTION_FUNCTION_TAP`, lets
explore a certain setup! We want one key to send `Space` on single tap,
but `Enter` on double-tap.
With `ACTION_FUNCTION_TAP`, it is quite a rain-dance to set this up, and
has the problem that when the sequence is interrupted, the interrupting
key will be send first. Thus, `SPC a` will result in `a SPC` being sent,
if they are typed within `TAPPING_TERM`. With the tap dance feature,
that'll come out as `SPC a`, correctly.
The implementation hooks into two parts of the system, to achieve this:
into `process_record_quantum()`, and the matrix scan. We need the latter
to be able to time out a tap sequence even when a key is not being
pressed, so `SPC` alone will time out and register after `TAPPING_TERM`
time.
But lets start with how to use it, first!
First, you will need `TAP_DANCE_ENABLE=yes` in your `Makefile`, because
the feature is disabled by default. This adds a little less than 1k to
the firmware size. Next, you will want to define some tap-dance keys,
which is easiest to do with the `TD()` macro, that - similar to `F()`,
takes a number, which will later be used as an index into the
`tap_dance_actions` array.
This array specifies what actions shall be taken when a tap-dance key is
in action. Currently, there are two possible options:
* `ACTION_TAP_DANCE_DOUBLE(kc1, kc2)`: Sends the `kc1` keycode when
tapped once, `kc2` otherwise.
* `ACTION_TAP_DANCE_FN(fn)`: Calls the specified function - defined in
the user keymap - with the current state of the tap-dance action.
The first option is enough for a lot of cases, that just want dual
roles. For example, `ACTION_TAP_DANCE(KC_SPC, KC_ENT)` will result in
`Space` being sent on single-tap, `Enter` otherwise.
And that's the bulk of it!
Do note, however, that this implementation does have some consequences:
keys do not register until either they reach the tapping ceiling, or
they time out. This means that if you hold the key, nothing happens, no
repeat, no nothing. It is possible to detect held state, and register an
action then too, but that's not implemented yet. Keys also unregister
immediately after being registered, so you can't even hold the second
tap. This is intentional, to be consistent.
And now, on to the explanation of how it works!
The main entry point is `process_tap_dance()`, called from
`process_record_quantum()`, which is run for every keypress, and our
handler gets to run early. This function checks whether the key pressed
is a tap-dance key. If it is not, and a tap-dance was in action, we
handle that first, and enqueue the newly pressed key. If it is a
tap-dance key, then we check if it is the same as the already active
one (if there's one active, that is). If it is not, we fire off the old
one first, then register the new one. If it was the same, we increment
the counter and the timer.
This means that you have `TAPPING_TERM` time to tap the key again, you
do not have to input all the taps within that timeframe. This allows for
longer tap counts, with minimal impact on responsiveness.
Our next stop is `matrix_scan_tap_dance()`. This handles the timeout of
tap-dance keys.
For the sake of flexibility, tap-dance actions can be either a pair of
keycodes, or a user function. The latter allows one to handle higher tap
counts, or do extra things, like blink the LEDs, fiddle with the
backlighting, and so on. This is accomplished by using an union, and
some clever macros.
In the end, lets see a full example!
```c
enum {
CT_SE = 0,
CT_CLN,
CT_EGG
};
/* Have the above three on the keymap, TD(CT_SE), etc... */
void dance_cln (qk_tap_dance_state_t *state) {
if (state->count == 1) {
register_code (KC_RSFT);
register_code (KC_SCLN);
unregister_code (KC_SCLN);
unregister_code (KC_RSFT);
} else {
register_code (KC_SCLN);
unregister_code (KC_SCLN);
reset_tap_dance (state);
}
}
void dance_egg (qk_tap_dance_state_t *state) {
if (state->count >= 100) {
SEND_STRING ("Safety dance!");
reset_tap_dance (state);
}
}
const qk_tap_dance_action_t tap_dance_actions[] = {
[CT_SE] = ACTION_TAP_DANCE_DOUBLE (KC_SPC, KC_ENT)
,[CT_CLN] = ACTION_TAP_DANCE_FN (dance_cln)
,[CT_EGG] = ACTION_TAP_DANCE_FN (dance_egg)
};
```
This addresses #426.
Signed-off-by: Gergely Nagy <algernon@madhouse-project.org>
* hhkb: Fix the build with the new tap-dance feature
Signed-off-by: Gergely Nagy <algernon@madhouse-project.org>
* tap_dance: Move process_tap_dance further down
Process the tap dance stuff after midi and audio, because those don't
process keycodes, but row/col positions.
Signed-off-by: Gergely Nagy <algernon@madhouse-project.org>
* tap_dance: Use conditionals instead of dummy functions
To be consistent with how the rest of the quantum features are
implemented, use ifdefs instead of dummy functions.
Signed-off-by: Gergely Nagy <algernon@madhouse-project.org>
* Merge branch 'master' into quantum-keypress-process
# Conflicts:
# Makefile
# keyboards/planck/rev3/config.h
# keyboards/planck/rev4/config.h
* update build script
2016-06-29 21:49:41 +00:00
|
|
|
|
2019-05-17 20:47:50 +00:00
|
|
|
extern layer_state_t default_layer_state;
|
2016-05-15 04:27:32 +00:00
|
|
|
|
|
|
|
|
#ifndef NO_ACTION_LAYER
|
2019-08-30 18:19:03 +00:00
|
|
|
extern layer_state_t layer_state;
|
2016-05-15 04:27:32 +00:00
|
|
|
#endif
|
|
|
|
|
|
2020-11-28 20:02:18 +00:00
|
|
|
#if defined(SEQUENCER_ENABLE)
|
|
|
|
|
# include "sequencer.h"
|
|
|
|
|
# include "process_sequencer.h"
|
|
|
|
|
#endif
|
|
|
|
|
|
2019-07-09 18:16:24 +00:00
|
|
|
#if defined(MIDI_ENABLE) && defined(MIDI_ADVANCED)
|
2019-08-30 18:19:03 +00:00
|
|
|
# include "process_midi.h"
|
Moves features to their own files (process_*), adds tap dance feature (#460)
* non-working commit
* working
* subprojects implemented for planck
* pass a subproject variable through to c
* consolidates clueboard revisions
* thanks for letting me know about conflicts..
* turn off audio for yang's
* corrects starting paths for subprojects
* messing around with travis
* semicolon
* travis script
* travis script
* script for travis
* correct directory (probably), amend files to commit
* remove origin before adding
* git pull, correct syntax
* git checkout
* git pull origin branch
* where are we?
* where are we?
* merging
* force things to happen
* adds commit message, adds add
* rebase, no commit message
* rebase branch
* idk!
* try just pull
* fetch - merge
* specify repo branch
* checkout
* goddammit
* merge? idk
* pls
* after all
* don't split up keyboards
* syntax
* adds quick for all-keyboards
* trying out new script
* script update
* lowercase
* all keyboards
* stop replacing compiled.hex automatically
* adds if statement
* skip automated build branches
* forces push to automated build branch
* throw an add in there
* upstream?
* adds AUTOGEN
* ignore all .hex files again
* testing out new repo
* global ident
* generate script, keyboard_keymap.hex
* skip generation for now, print pandoc info, submodule update
* try trusty
* and sudo
* try generate
* updates subprojects to keyboards
* no idea
* updates to keyboards
* cleans up clueboard stuff
* setup to use local readme
* updates cluepad, planck experimental
* remove extra led.c [ci skip]
* audio and midi moved over to separate files
* chording, leader, unicode separated
* consolidate each [skip ci]
* correct include
* quantum: Add a tap dance feature (#451)
* quantum: Add a tap dance feature
With this feature one can specify keys that behave differently, based on
the amount of times they have been tapped, and when interrupted, they
get handled before the interrupter.
To make it clear how this is different from `ACTION_FUNCTION_TAP`, lets
explore a certain setup! We want one key to send `Space` on single tap,
but `Enter` on double-tap.
With `ACTION_FUNCTION_TAP`, it is quite a rain-dance to set this up, and
has the problem that when the sequence is interrupted, the interrupting
key will be send first. Thus, `SPC a` will result in `a SPC` being sent,
if they are typed within `TAPPING_TERM`. With the tap dance feature,
that'll come out as `SPC a`, correctly.
The implementation hooks into two parts of the system, to achieve this:
into `process_record_quantum()`, and the matrix scan. We need the latter
to be able to time out a tap sequence even when a key is not being
pressed, so `SPC` alone will time out and register after `TAPPING_TERM`
time.
But lets start with how to use it, first!
First, you will need `TAP_DANCE_ENABLE=yes` in your `Makefile`, because
the feature is disabled by default. This adds a little less than 1k to
the firmware size. Next, you will want to define some tap-dance keys,
which is easiest to do with the `TD()` macro, that - similar to `F()`,
takes a number, which will later be used as an index into the
`tap_dance_actions` array.
This array specifies what actions shall be taken when a tap-dance key is
in action. Currently, there are two possible options:
* `ACTION_TAP_DANCE_DOUBLE(kc1, kc2)`: Sends the `kc1` keycode when
tapped once, `kc2` otherwise.
* `ACTION_TAP_DANCE_FN(fn)`: Calls the specified function - defined in
the user keymap - with the current state of the tap-dance action.
The first option is enough for a lot of cases, that just want dual
roles. For example, `ACTION_TAP_DANCE(KC_SPC, KC_ENT)` will result in
`Space` being sent on single-tap, `Enter` otherwise.
And that's the bulk of it!
Do note, however, that this implementation does have some consequences:
keys do not register until either they reach the tapping ceiling, or
they time out. This means that if you hold the key, nothing happens, no
repeat, no nothing. It is possible to detect held state, and register an
action then too, but that's not implemented yet. Keys also unregister
immediately after being registered, so you can't even hold the second
tap. This is intentional, to be consistent.
And now, on to the explanation of how it works!
The main entry point is `process_tap_dance()`, called from
`process_record_quantum()`, which is run for every keypress, and our
handler gets to run early. This function checks whether the key pressed
is a tap-dance key. If it is not, and a tap-dance was in action, we
handle that first, and enqueue the newly pressed key. If it is a
tap-dance key, then we check if it is the same as the already active
one (if there's one active, that is). If it is not, we fire off the old
one first, then register the new one. If it was the same, we increment
the counter and the timer.
This means that you have `TAPPING_TERM` time to tap the key again, you
do not have to input all the taps within that timeframe. This allows for
longer tap counts, with minimal impact on responsiveness.
Our next stop is `matrix_scan_tap_dance()`. This handles the timeout of
tap-dance keys.
For the sake of flexibility, tap-dance actions can be either a pair of
keycodes, or a user function. The latter allows one to handle higher tap
counts, or do extra things, like blink the LEDs, fiddle with the
backlighting, and so on. This is accomplished by using an union, and
some clever macros.
In the end, lets see a full example!
```c
enum {
CT_SE = 0,
CT_CLN,
CT_EGG
};
/* Have the above three on the keymap, TD(CT_SE), etc... */
void dance_cln (qk_tap_dance_state_t *state) {
if (state->count == 1) {
register_code (KC_RSFT);
register_code (KC_SCLN);
unregister_code (KC_SCLN);
unregister_code (KC_RSFT);
} else {
register_code (KC_SCLN);
unregister_code (KC_SCLN);
reset_tap_dance (state);
}
}
void dance_egg (qk_tap_dance_state_t *state) {
if (state->count >= 100) {
SEND_STRING ("Safety dance!");
reset_tap_dance (state);
}
}
const qk_tap_dance_action_t tap_dance_actions[] = {
[CT_SE] = ACTION_TAP_DANCE_DOUBLE (KC_SPC, KC_ENT)
,[CT_CLN] = ACTION_TAP_DANCE_FN (dance_cln)
,[CT_EGG] = ACTION_TAP_DANCE_FN (dance_egg)
};
```
This addresses #426.
Signed-off-by: Gergely Nagy <algernon@madhouse-project.org>
* hhkb: Fix the build with the new tap-dance feature
Signed-off-by: Gergely Nagy <algernon@madhouse-project.org>
* tap_dance: Move process_tap_dance further down
Process the tap dance stuff after midi and audio, because those don't
process keycodes, but row/col positions.
Signed-off-by: Gergely Nagy <algernon@madhouse-project.org>
* tap_dance: Use conditionals instead of dummy functions
To be consistent with how the rest of the quantum features are
implemented, use ifdefs instead of dummy functions.
Signed-off-by: Gergely Nagy <algernon@madhouse-project.org>
* Merge branch 'master' into quantum-keypress-process
# Conflicts:
# Makefile
# keyboards/planck/rev3/config.h
# keyboards/planck/rev4/config.h
* update build script
2016-06-29 21:49:41 +00:00
|
|
|
#endif
|
|
|
|
|
|
2016-05-19 03:47:16 +00:00
|
|
|
#ifdef AUDIO_ENABLE
|
2019-08-30 18:19:03 +00:00
|
|
|
# include "audio.h"
|
|
|
|
|
# include "process_audio.h"
|
|
|
|
|
# ifdef AUDIO_CLICKY
|
|
|
|
|
# include "process_clicky.h"
|
|
|
|
|
# endif
|
2017-02-26 03:25:33 +00:00
|
|
|
#endif
|
|
|
|
|
|
2017-07-26 21:41:39 +00:00
|
|
|
#ifdef STENO_ENABLE
|
2019-08-30 18:19:03 +00:00
|
|
|
# include "process_steno.h"
|
2017-07-26 21:41:39 +00:00
|
|
|
#endif
|
|
|
|
|
|
2017-02-26 03:25:33 +00:00
|
|
|
#if defined(AUDIO_ENABLE) || (defined(MIDI_ENABLE) && defined(MIDI_BASIC))
|
2019-08-30 18:19:03 +00:00
|
|
|
# include "process_music.h"
|
2016-05-19 03:47:16 +00:00
|
|
|
#endif
|
2016-05-15 04:27:32 +00:00
|
|
|
|
2020-02-29 20:00:00 +00:00
|
|
|
#ifdef BACKLIGHT_ENABLE
|
|
|
|
|
# include "process_backlight.h"
|
|
|
|
|
#endif
|
|
|
|
|
|
2018-09-17 17:48:02 +00:00
|
|
|
#ifdef LEADER_ENABLE
|
2019-08-30 18:19:03 +00:00
|
|
|
# include "process_leader.h"
|
Moves features to their own files (process_*), adds tap dance feature (#460)
* non-working commit
* working
* subprojects implemented for planck
* pass a subproject variable through to c
* consolidates clueboard revisions
* thanks for letting me know about conflicts..
* turn off audio for yang's
* corrects starting paths for subprojects
* messing around with travis
* semicolon
* travis script
* travis script
* script for travis
* correct directory (probably), amend files to commit
* remove origin before adding
* git pull, correct syntax
* git checkout
* git pull origin branch
* where are we?
* where are we?
* merging
* force things to happen
* adds commit message, adds add
* rebase, no commit message
* rebase branch
* idk!
* try just pull
* fetch - merge
* specify repo branch
* checkout
* goddammit
* merge? idk
* pls
* after all
* don't split up keyboards
* syntax
* adds quick for all-keyboards
* trying out new script
* script update
* lowercase
* all keyboards
* stop replacing compiled.hex automatically
* adds if statement
* skip automated build branches
* forces push to automated build branch
* throw an add in there
* upstream?
* adds AUTOGEN
* ignore all .hex files again
* testing out new repo
* global ident
* generate script, keyboard_keymap.hex
* skip generation for now, print pandoc info, submodule update
* try trusty
* and sudo
* try generate
* updates subprojects to keyboards
* no idea
* updates to keyboards
* cleans up clueboard stuff
* setup to use local readme
* updates cluepad, planck experimental
* remove extra led.c [ci skip]
* audio and midi moved over to separate files
* chording, leader, unicode separated
* consolidate each [skip ci]
* correct include
* quantum: Add a tap dance feature (#451)
* quantum: Add a tap dance feature
With this feature one can specify keys that behave differently, based on
the amount of times they have been tapped, and when interrupted, they
get handled before the interrupter.
To make it clear how this is different from `ACTION_FUNCTION_TAP`, lets
explore a certain setup! We want one key to send `Space` on single tap,
but `Enter` on double-tap.
With `ACTION_FUNCTION_TAP`, it is quite a rain-dance to set this up, and
has the problem that when the sequence is interrupted, the interrupting
key will be send first. Thus, `SPC a` will result in `a SPC` being sent,
if they are typed within `TAPPING_TERM`. With the tap dance feature,
that'll come out as `SPC a`, correctly.
The implementation hooks into two parts of the system, to achieve this:
into `process_record_quantum()`, and the matrix scan. We need the latter
to be able to time out a tap sequence even when a key is not being
pressed, so `SPC` alone will time out and register after `TAPPING_TERM`
time.
But lets start with how to use it, first!
First, you will need `TAP_DANCE_ENABLE=yes` in your `Makefile`, because
the feature is disabled by default. This adds a little less than 1k to
the firmware size. Next, you will want to define some tap-dance keys,
which is easiest to do with the `TD()` macro, that - similar to `F()`,
takes a number, which will later be used as an index into the
`tap_dance_actions` array.
This array specifies what actions shall be taken when a tap-dance key is
in action. Currently, there are two possible options:
* `ACTION_TAP_DANCE_DOUBLE(kc1, kc2)`: Sends the `kc1` keycode when
tapped once, `kc2` otherwise.
* `ACTION_TAP_DANCE_FN(fn)`: Calls the specified function - defined in
the user keymap - with the current state of the tap-dance action.
The first option is enough for a lot of cases, that just want dual
roles. For example, `ACTION_TAP_DANCE(KC_SPC, KC_ENT)` will result in
`Space` being sent on single-tap, `Enter` otherwise.
And that's the bulk of it!
Do note, however, that this implementation does have some consequences:
keys do not register until either they reach the tapping ceiling, or
they time out. This means that if you hold the key, nothing happens, no
repeat, no nothing. It is possible to detect held state, and register an
action then too, but that's not implemented yet. Keys also unregister
immediately after being registered, so you can't even hold the second
tap. This is intentional, to be consistent.
And now, on to the explanation of how it works!
The main entry point is `process_tap_dance()`, called from
`process_record_quantum()`, which is run for every keypress, and our
handler gets to run early. This function checks whether the key pressed
is a tap-dance key. If it is not, and a tap-dance was in action, we
handle that first, and enqueue the newly pressed key. If it is a
tap-dance key, then we check if it is the same as the already active
one (if there's one active, that is). If it is not, we fire off the old
one first, then register the new one. If it was the same, we increment
the counter and the timer.
This means that you have `TAPPING_TERM` time to tap the key again, you
do not have to input all the taps within that timeframe. This allows for
longer tap counts, with minimal impact on responsiveness.
Our next stop is `matrix_scan_tap_dance()`. This handles the timeout of
tap-dance keys.
For the sake of flexibility, tap-dance actions can be either a pair of
keycodes, or a user function. The latter allows one to handle higher tap
counts, or do extra things, like blink the LEDs, fiddle with the
backlighting, and so on. This is accomplished by using an union, and
some clever macros.
In the end, lets see a full example!
```c
enum {
CT_SE = 0,
CT_CLN,
CT_EGG
};
/* Have the above three on the keymap, TD(CT_SE), etc... */
void dance_cln (qk_tap_dance_state_t *state) {
if (state->count == 1) {
register_code (KC_RSFT);
register_code (KC_SCLN);
unregister_code (KC_SCLN);
unregister_code (KC_RSFT);
} else {
register_code (KC_SCLN);
unregister_code (KC_SCLN);
reset_tap_dance (state);
}
}
void dance_egg (qk_tap_dance_state_t *state) {
if (state->count >= 100) {
SEND_STRING ("Safety dance!");
reset_tap_dance (state);
}
}
const qk_tap_dance_action_t tap_dance_actions[] = {
[CT_SE] = ACTION_TAP_DANCE_DOUBLE (KC_SPC, KC_ENT)
,[CT_CLN] = ACTION_TAP_DANCE_FN (dance_cln)
,[CT_EGG] = ACTION_TAP_DANCE_FN (dance_egg)
};
```
This addresses #426.
Signed-off-by: Gergely Nagy <algernon@madhouse-project.org>
* hhkb: Fix the build with the new tap-dance feature
Signed-off-by: Gergely Nagy <algernon@madhouse-project.org>
* tap_dance: Move process_tap_dance further down
Process the tap dance stuff after midi and audio, because those don't
process keycodes, but row/col positions.
Signed-off-by: Gergely Nagy <algernon@madhouse-project.org>
* tap_dance: Use conditionals instead of dummy functions
To be consistent with how the rest of the quantum features are
implemented, use ifdefs instead of dummy functions.
Signed-off-by: Gergely Nagy <algernon@madhouse-project.org>
* Merge branch 'master' into quantum-keypress-process
# Conflicts:
# Makefile
# keyboards/planck/rev3/config.h
# keyboards/planck/rev4/config.h
* update build script
2016-06-29 21:49:41 +00:00
|
|
|
#endif
|
2016-05-15 04:27:32 +00:00
|
|
|
|
Moves features to their own files (process_*), adds tap dance feature (#460)
* non-working commit
* working
* subprojects implemented for planck
* pass a subproject variable through to c
* consolidates clueboard revisions
* thanks for letting me know about conflicts..
* turn off audio for yang's
* corrects starting paths for subprojects
* messing around with travis
* semicolon
* travis script
* travis script
* script for travis
* correct directory (probably), amend files to commit
* remove origin before adding
* git pull, correct syntax
* git checkout
* git pull origin branch
* where are we?
* where are we?
* merging
* force things to happen
* adds commit message, adds add
* rebase, no commit message
* rebase branch
* idk!
* try just pull
* fetch - merge
* specify repo branch
* checkout
* goddammit
* merge? idk
* pls
* after all
* don't split up keyboards
* syntax
* adds quick for all-keyboards
* trying out new script
* script update
* lowercase
* all keyboards
* stop replacing compiled.hex automatically
* adds if statement
* skip automated build branches
* forces push to automated build branch
* throw an add in there
* upstream?
* adds AUTOGEN
* ignore all .hex files again
* testing out new repo
* global ident
* generate script, keyboard_keymap.hex
* skip generation for now, print pandoc info, submodule update
* try trusty
* and sudo
* try generate
* updates subprojects to keyboards
* no idea
* updates to keyboards
* cleans up clueboard stuff
* setup to use local readme
* updates cluepad, planck experimental
* remove extra led.c [ci skip]
* audio and midi moved over to separate files
* chording, leader, unicode separated
* consolidate each [skip ci]
* correct include
* quantum: Add a tap dance feature (#451)
* quantum: Add a tap dance feature
With this feature one can specify keys that behave differently, based on
the amount of times they have been tapped, and when interrupted, they
get handled before the interrupter.
To make it clear how this is different from `ACTION_FUNCTION_TAP`, lets
explore a certain setup! We want one key to send `Space` on single tap,
but `Enter` on double-tap.
With `ACTION_FUNCTION_TAP`, it is quite a rain-dance to set this up, and
has the problem that when the sequence is interrupted, the interrupting
key will be send first. Thus, `SPC a` will result in `a SPC` being sent,
if they are typed within `TAPPING_TERM`. With the tap dance feature,
that'll come out as `SPC a`, correctly.
The implementation hooks into two parts of the system, to achieve this:
into `process_record_quantum()`, and the matrix scan. We need the latter
to be able to time out a tap sequence even when a key is not being
pressed, so `SPC` alone will time out and register after `TAPPING_TERM`
time.
But lets start with how to use it, first!
First, you will need `TAP_DANCE_ENABLE=yes` in your `Makefile`, because
the feature is disabled by default. This adds a little less than 1k to
the firmware size. Next, you will want to define some tap-dance keys,
which is easiest to do with the `TD()` macro, that - similar to `F()`,
takes a number, which will later be used as an index into the
`tap_dance_actions` array.
This array specifies what actions shall be taken when a tap-dance key is
in action. Currently, there are two possible options:
* `ACTION_TAP_DANCE_DOUBLE(kc1, kc2)`: Sends the `kc1` keycode when
tapped once, `kc2` otherwise.
* `ACTION_TAP_DANCE_FN(fn)`: Calls the specified function - defined in
the user keymap - with the current state of the tap-dance action.
The first option is enough for a lot of cases, that just want dual
roles. For example, `ACTION_TAP_DANCE(KC_SPC, KC_ENT)` will result in
`Space` being sent on single-tap, `Enter` otherwise.
And that's the bulk of it!
Do note, however, that this implementation does have some consequences:
keys do not register until either they reach the tapping ceiling, or
they time out. This means that if you hold the key, nothing happens, no
repeat, no nothing. It is possible to detect held state, and register an
action then too, but that's not implemented yet. Keys also unregister
immediately after being registered, so you can't even hold the second
tap. This is intentional, to be consistent.
And now, on to the explanation of how it works!
The main entry point is `process_tap_dance()`, called from
`process_record_quantum()`, which is run for every keypress, and our
handler gets to run early. This function checks whether the key pressed
is a tap-dance key. If it is not, and a tap-dance was in action, we
handle that first, and enqueue the newly pressed key. If it is a
tap-dance key, then we check if it is the same as the already active
one (if there's one active, that is). If it is not, we fire off the old
one first, then register the new one. If it was the same, we increment
the counter and the timer.
This means that you have `TAPPING_TERM` time to tap the key again, you
do not have to input all the taps within that timeframe. This allows for
longer tap counts, with minimal impact on responsiveness.
Our next stop is `matrix_scan_tap_dance()`. This handles the timeout of
tap-dance keys.
For the sake of flexibility, tap-dance actions can be either a pair of
keycodes, or a user function. The latter allows one to handle higher tap
counts, or do extra things, like blink the LEDs, fiddle with the
backlighting, and so on. This is accomplished by using an union, and
some clever macros.
In the end, lets see a full example!
```c
enum {
CT_SE = 0,
CT_CLN,
CT_EGG
};
/* Have the above three on the keymap, TD(CT_SE), etc... */
void dance_cln (qk_tap_dance_state_t *state) {
if (state->count == 1) {
register_code (KC_RSFT);
register_code (KC_SCLN);
unregister_code (KC_SCLN);
unregister_code (KC_RSFT);
} else {
register_code (KC_SCLN);
unregister_code (KC_SCLN);
reset_tap_dance (state);
}
}
void dance_egg (qk_tap_dance_state_t *state) {
if (state->count >= 100) {
SEND_STRING ("Safety dance!");
reset_tap_dance (state);
}
}
const qk_tap_dance_action_t tap_dance_actions[] = {
[CT_SE] = ACTION_TAP_DANCE_DOUBLE (KC_SPC, KC_ENT)
,[CT_CLN] = ACTION_TAP_DANCE_FN (dance_cln)
,[CT_EGG] = ACTION_TAP_DANCE_FN (dance_egg)
};
```
This addresses #426.
Signed-off-by: Gergely Nagy <algernon@madhouse-project.org>
* hhkb: Fix the build with the new tap-dance feature
Signed-off-by: Gergely Nagy <algernon@madhouse-project.org>
* tap_dance: Move process_tap_dance further down
Process the tap dance stuff after midi and audio, because those don't
process keycodes, but row/col positions.
Signed-off-by: Gergely Nagy <algernon@madhouse-project.org>
* tap_dance: Use conditionals instead of dummy functions
To be consistent with how the rest of the quantum features are
implemented, use ifdefs instead of dummy functions.
Signed-off-by: Gergely Nagy <algernon@madhouse-project.org>
* Merge branch 'master' into quantum-keypress-process
# Conflicts:
# Makefile
# keyboards/planck/rev3/config.h
# keyboards/planck/rev4/config.h
* update build script
2016-06-29 21:49:41 +00:00
|
|
|
#ifdef UNICODE_ENABLE
|
2019-08-30 18:19:03 +00:00
|
|
|
# include "process_unicode.h"
|
2016-05-15 04:27:32 +00:00
|
|
|
#endif
|
|
|
|
|
|
2017-02-15 21:36:31 +00:00
|
|
|
#ifdef UCIS_ENABLE
|
2019-08-30 18:19:03 +00:00
|
|
|
# include "process_ucis.h"
|
2017-02-15 21:36:31 +00:00
|
|
|
#endif
|
|
|
|
|
|
|
|
|
|
#ifdef UNICODEMAP_ENABLE
|
2019-08-30 18:19:03 +00:00
|
|
|
# include "process_unicodemap.h"
|
2017-02-15 21:36:31 +00:00
|
|
|
#endif
|
|
|
|
|
|
2018-10-01 15:09:05 +00:00
|
|
|
#ifdef TAP_DANCE_ENABLE
|
2019-08-30 18:19:03 +00:00
|
|
|
# include "process_tap_dance.h"
|
2018-10-01 15:09:05 +00:00
|
|
|
#endif
|
Moves features to their own files (process_*), adds tap dance feature (#460)
* non-working commit
* working
* subprojects implemented for planck
* pass a subproject variable through to c
* consolidates clueboard revisions
* thanks for letting me know about conflicts..
* turn off audio for yang's
* corrects starting paths for subprojects
* messing around with travis
* semicolon
* travis script
* travis script
* script for travis
* correct directory (probably), amend files to commit
* remove origin before adding
* git pull, correct syntax
* git checkout
* git pull origin branch
* where are we?
* where are we?
* merging
* force things to happen
* adds commit message, adds add
* rebase, no commit message
* rebase branch
* idk!
* try just pull
* fetch - merge
* specify repo branch
* checkout
* goddammit
* merge? idk
* pls
* after all
* don't split up keyboards
* syntax
* adds quick for all-keyboards
* trying out new script
* script update
* lowercase
* all keyboards
* stop replacing compiled.hex automatically
* adds if statement
* skip automated build branches
* forces push to automated build branch
* throw an add in there
* upstream?
* adds AUTOGEN
* ignore all .hex files again
* testing out new repo
* global ident
* generate script, keyboard_keymap.hex
* skip generation for now, print pandoc info, submodule update
* try trusty
* and sudo
* try generate
* updates subprojects to keyboards
* no idea
* updates to keyboards
* cleans up clueboard stuff
* setup to use local readme
* updates cluepad, planck experimental
* remove extra led.c [ci skip]
* audio and midi moved over to separate files
* chording, leader, unicode separated
* consolidate each [skip ci]
* correct include
* quantum: Add a tap dance feature (#451)
* quantum: Add a tap dance feature
With this feature one can specify keys that behave differently, based on
the amount of times they have been tapped, and when interrupted, they
get handled before the interrupter.
To make it clear how this is different from `ACTION_FUNCTION_TAP`, lets
explore a certain setup! We want one key to send `Space` on single tap,
but `Enter` on double-tap.
With `ACTION_FUNCTION_TAP`, it is quite a rain-dance to set this up, and
has the problem that when the sequence is interrupted, the interrupting
key will be send first. Thus, `SPC a` will result in `a SPC` being sent,
if they are typed within `TAPPING_TERM`. With the tap dance feature,
that'll come out as `SPC a`, correctly.
The implementation hooks into two parts of the system, to achieve this:
into `process_record_quantum()`, and the matrix scan. We need the latter
to be able to time out a tap sequence even when a key is not being
pressed, so `SPC` alone will time out and register after `TAPPING_TERM`
time.
But lets start with how to use it, first!
First, you will need `TAP_DANCE_ENABLE=yes` in your `Makefile`, because
the feature is disabled by default. This adds a little less than 1k to
the firmware size. Next, you will want to define some tap-dance keys,
which is easiest to do with the `TD()` macro, that - similar to `F()`,
takes a number, which will later be used as an index into the
`tap_dance_actions` array.
This array specifies what actions shall be taken when a tap-dance key is
in action. Currently, there are two possible options:
* `ACTION_TAP_DANCE_DOUBLE(kc1, kc2)`: Sends the `kc1` keycode when
tapped once, `kc2` otherwise.
* `ACTION_TAP_DANCE_FN(fn)`: Calls the specified function - defined in
the user keymap - with the current state of the tap-dance action.
The first option is enough for a lot of cases, that just want dual
roles. For example, `ACTION_TAP_DANCE(KC_SPC, KC_ENT)` will result in
`Space` being sent on single-tap, `Enter` otherwise.
And that's the bulk of it!
Do note, however, that this implementation does have some consequences:
keys do not register until either they reach the tapping ceiling, or
they time out. This means that if you hold the key, nothing happens, no
repeat, no nothing. It is possible to detect held state, and register an
action then too, but that's not implemented yet. Keys also unregister
immediately after being registered, so you can't even hold the second
tap. This is intentional, to be consistent.
And now, on to the explanation of how it works!
The main entry point is `process_tap_dance()`, called from
`process_record_quantum()`, which is run for every keypress, and our
handler gets to run early. This function checks whether the key pressed
is a tap-dance key. If it is not, and a tap-dance was in action, we
handle that first, and enqueue the newly pressed key. If it is a
tap-dance key, then we check if it is the same as the already active
one (if there's one active, that is). If it is not, we fire off the old
one first, then register the new one. If it was the same, we increment
the counter and the timer.
This means that you have `TAPPING_TERM` time to tap the key again, you
do not have to input all the taps within that timeframe. This allows for
longer tap counts, with minimal impact on responsiveness.
Our next stop is `matrix_scan_tap_dance()`. This handles the timeout of
tap-dance keys.
For the sake of flexibility, tap-dance actions can be either a pair of
keycodes, or a user function. The latter allows one to handle higher tap
counts, or do extra things, like blink the LEDs, fiddle with the
backlighting, and so on. This is accomplished by using an union, and
some clever macros.
In the end, lets see a full example!
```c
enum {
CT_SE = 0,
CT_CLN,
CT_EGG
};
/* Have the above three on the keymap, TD(CT_SE), etc... */
void dance_cln (qk_tap_dance_state_t *state) {
if (state->count == 1) {
register_code (KC_RSFT);
register_code (KC_SCLN);
unregister_code (KC_SCLN);
unregister_code (KC_RSFT);
} else {
register_code (KC_SCLN);
unregister_code (KC_SCLN);
reset_tap_dance (state);
}
}
void dance_egg (qk_tap_dance_state_t *state) {
if (state->count >= 100) {
SEND_STRING ("Safety dance!");
reset_tap_dance (state);
}
}
const qk_tap_dance_action_t tap_dance_actions[] = {
[CT_SE] = ACTION_TAP_DANCE_DOUBLE (KC_SPC, KC_ENT)
,[CT_CLN] = ACTION_TAP_DANCE_FN (dance_cln)
,[CT_EGG] = ACTION_TAP_DANCE_FN (dance_egg)
};
```
This addresses #426.
Signed-off-by: Gergely Nagy <algernon@madhouse-project.org>
* hhkb: Fix the build with the new tap-dance feature
Signed-off-by: Gergely Nagy <algernon@madhouse-project.org>
* tap_dance: Move process_tap_dance further down
Process the tap dance stuff after midi and audio, because those don't
process keycodes, but row/col positions.
Signed-off-by: Gergely Nagy <algernon@madhouse-project.org>
* tap_dance: Use conditionals instead of dummy functions
To be consistent with how the rest of the quantum features are
implemented, use ifdefs instead of dummy functions.
Signed-off-by: Gergely Nagy <algernon@madhouse-project.org>
* Merge branch 'master' into quantum-keypress-process
# Conflicts:
# Makefile
# keyboards/planck/rev3/config.h
# keyboards/planck/rev4/config.h
* update build script
2016-06-29 21:49:41 +00:00
|
|
|
|
2016-10-16 20:03:33 +00:00
|
|
|
#ifdef PRINTING_ENABLE
|
2019-08-30 18:19:03 +00:00
|
|
|
# include "process_printer.h"
|
2016-10-16 20:03:33 +00:00
|
|
|
#endif
|
|
|
|
|
|
2017-09-17 05:33:28 +00:00
|
|
|
#ifdef AUTO_SHIFT_ENABLE
|
2019-08-30 18:19:03 +00:00
|
|
|
# include "process_auto_shift.h"
|
2017-09-17 05:33:28 +00:00
|
|
|
#endif
|
|
|
|
|
|
2016-12-09 22:49:11 +00:00
|
|
|
#ifdef COMBO_ENABLE
|
2019-08-30 18:19:03 +00:00
|
|
|
# include "process_combo.h"
|
2016-12-09 22:49:11 +00:00
|
|
|
#endif
|
|
|
|
|
|
2017-08-06 08:50:20 +00:00
|
|
|
#ifdef KEY_LOCK_ENABLE
|
2019-08-30 18:19:03 +00:00
|
|
|
# include "process_key_lock.h"
|
2017-08-06 08:50:20 +00:00
|
|
|
#endif
|
|
|
|
|
|
2017-09-12 04:43:10 +00:00
|
|
|
#ifdef TERMINAL_ENABLE
|
2019-08-30 18:19:03 +00:00
|
|
|
# include "process_terminal.h"
|
2017-09-12 04:43:10 +00:00
|
|
|
#else
|
2019-08-30 18:19:03 +00:00
|
|
|
# include "process_terminal_nop.h"
|
2017-09-12 04:43:10 +00:00
|
|
|
#endif
|
|
|
|
|
|
2019-04-30 03:21:46 +00:00
|
|
|
#ifdef SPACE_CADET_ENABLE
|
2019-08-30 18:19:03 +00:00
|
|
|
# include "process_space_cadet.h"
|
2019-04-30 03:21:46 +00:00
|
|
|
#endif
|
|
|
|
|
|
2019-12-03 19:48:55 +00:00
|
|
|
#ifdef MAGIC_KEYCODE_ENABLE
|
|
|
|
|
# include "process_magic.h"
|
|
|
|
|
#endif
|
|
|
|
|
|
2020-07-25 12:01:15 +00:00
|
|
|
#ifdef JOYSTICK_ENABLE
|
|
|
|
|
# include "process_joystick.h"
|
|
|
|
|
#endif
|
|
|
|
|
|
2020-02-05 02:49:10 +00:00
|
|
|
#ifdef GRAVE_ESC_ENABLE
|
|
|
|
|
# include "process_grave_esc.h"
|
|
|
|
|
#endif
|
|
|
|
|
|
2019-12-16 20:27:53 +00:00
|
|
|
#if defined(RGBLIGHT_ENABLE) || defined(RGB_MATRIX_ENABLE)
|
|
|
|
|
# include "process_rgb.h"
|
|
|
|
|
#endif
|
|
|
|
|
|
2018-07-15 17:31:45 +00:00
|
|
|
#ifdef HD44780_ENABLE
|
2019-08-30 18:19:03 +00:00
|
|
|
# include "hd44780.h"
|
2018-07-15 17:31:45 +00:00
|
|
|
#endif
|
|
|
|
|
|
2019-02-17 02:39:30 +00:00
|
|
|
#ifdef HAPTIC_ENABLE
|
2019-08-30 18:19:03 +00:00
|
|
|
# include "haptic.h"
|
2019-02-17 02:39:30 +00:00
|
|
|
#endif
|
|
|
|
|
|
2019-04-16 03:32:57 +00:00
|
|
|
#ifdef OLED_DRIVER_ENABLE
|
2019-08-30 18:19:03 +00:00
|
|
|
# include "oled_driver.h"
|
2019-04-16 03:32:57 +00:00
|
|
|
#endif
|
|
|
|
|
|
2019-09-03 15:34:31 +00:00
|
|
|
#ifdef DIP_SWITCH_ENABLE
|
2019-11-17 14:02:26 +00:00
|
|
|
# include "dip_switch.h"
|
2019-09-03 15:34:31 +00:00
|
|
|
#endif
|
|
|
|
|
|
2019-11-05 06:59:13 +00:00
|
|
|
#ifdef DYNAMIC_MACRO_ENABLE
|
2019-11-17 14:02:26 +00:00
|
|
|
# include "process_dynamic_macro.h"
|
2019-11-05 06:59:13 +00:00
|
|
|
#endif
|
|
|
|
|
|
2020-01-03 20:52:00 +00:00
|
|
|
#ifdef DYNAMIC_KEYMAP_ENABLE
|
2020-01-19 16:30:34 +00:00
|
|
|
# include "dynamic_keymap.h"
|
2020-01-03 20:52:00 +00:00
|
|
|
#endif
|
|
|
|
|
|
|
|
|
|
#ifdef VIA_ENABLE
|
2020-01-19 16:30:34 +00:00
|
|
|
# include "via.h"
|
2020-01-03 20:52:00 +00:00
|
|
|
#endif
|
|
|
|
|
|
2020-03-22 13:06:16 +00:00
|
|
|
#ifdef WPM_ENABLE
|
|
|
|
|
# include "wpm.h"
|
|
|
|
|
#endif
|
|
|
|
|
|
2019-07-09 18:16:24 +00:00
|
|
|
// Function substitutions to ease GPIO manipulation
|
|
|
|
|
#if defined(__AVR__)
|
2019-08-30 18:19:03 +00:00
|
|
|
typedef uint8_t pin_t;
|
2019-07-09 18:16:24 +00:00
|
|
|
|
2020-01-27 04:04:39 +00:00
|
|
|
# define setPinInput(pin) (DDRx_ADDRESS(pin) &= ~_BV((pin)&0xF), PORTx_ADDRESS(pin) &= ~_BV((pin)&0xF))
|
2019-08-30 18:19:03 +00:00
|
|
|
# define setPinInputHigh(pin) (DDRx_ADDRESS(pin) &= ~_BV((pin)&0xF), PORTx_ADDRESS(pin) |= _BV((pin)&0xF))
|
|
|
|
|
# define setPinInputLow(pin) _Static_assert(0, "AVR processors cannot implement an input as pull low")
|
|
|
|
|
# define setPinOutput(pin) (DDRx_ADDRESS(pin) |= _BV((pin)&0xF))
|
2019-07-09 18:16:24 +00:00
|
|
|
|
2019-08-30 18:19:03 +00:00
|
|
|
# define writePinHigh(pin) (PORTx_ADDRESS(pin) |= _BV((pin)&0xF))
|
|
|
|
|
# define writePinLow(pin) (PORTx_ADDRESS(pin) &= ~_BV((pin)&0xF))
|
|
|
|
|
# define writePin(pin, level) ((level) ? writePinHigh(pin) : writePinLow(pin))
|
2019-07-09 18:16:24 +00:00
|
|
|
|
2019-08-30 18:19:03 +00:00
|
|
|
# define readPin(pin) ((bool)(PINx_ADDRESS(pin) & _BV((pin)&0xF)))
|
2020-01-27 04:04:39 +00:00
|
|
|
|
2020-04-29 11:38:51 +00:00
|
|
|
# define togglePin(pin) (PORTx_ADDRESS(pin) ^= _BV((pin)&0xF))
|
2020-04-29 11:04:29 +00:00
|
|
|
|
2021-01-13 01:46:22 +00:00
|
|
|
/* The AVR series GPIOs have a one clock read delay for changes in the digital input signal.
|
|
|
|
|
* But here's more margin to make it two clocks. */
|
|
|
|
|
# if !defined(GPIO_INPUT_PIN_DELAY)
|
|
|
|
|
# define GPIO_INPUT_PIN_DELAY 2
|
|
|
|
|
# endif
|
|
|
|
|
# define waitInputPinDelay() wait_cpuclock(GPIO_INPUT_PIN_DELAY)
|
|
|
|
|
|
2018-09-28 16:33:11 +00:00
|
|
|
#elif defined(PROTOCOL_CHIBIOS)
|
2019-08-30 18:19:03 +00:00
|
|
|
typedef ioline_t pin_t;
|
2019-07-09 18:16:24 +00:00
|
|
|
|
2019-08-30 18:19:03 +00:00
|
|
|
# define setPinInput(pin) palSetLineMode(pin, PAL_MODE_INPUT)
|
|
|
|
|
# define setPinInputHigh(pin) palSetLineMode(pin, PAL_MODE_INPUT_PULLUP)
|
|
|
|
|
# define setPinInputLow(pin) palSetLineMode(pin, PAL_MODE_INPUT_PULLDOWN)
|
|
|
|
|
# define setPinOutput(pin) palSetLineMode(pin, PAL_MODE_OUTPUT_PUSHPULL)
|
2019-07-09 18:16:24 +00:00
|
|
|
|
2019-08-30 18:19:03 +00:00
|
|
|
# define writePinHigh(pin) palSetLine(pin)
|
|
|
|
|
# define writePinLow(pin) palClearLine(pin)
|
2020-11-26 12:44:17 +00:00
|
|
|
# define writePin(pin, level) ((level) ? (writePinHigh(pin)) : (writePinLow(pin)))
|
2019-07-09 18:16:24 +00:00
|
|
|
|
2019-08-30 18:19:03 +00:00
|
|
|
# define readPin(pin) palReadLine(pin)
|
2020-04-29 11:04:29 +00:00
|
|
|
|
|
|
|
|
# define togglePin(pin) palToggleLine(pin)
|
2021-01-13 01:46:22 +00:00
|
|
|
|
|
|
|
|
#endif
|
|
|
|
|
|
|
|
|
|
#if defined(__ARMEL__) || defined(__ARMEB__)
|
|
|
|
|
/* For GPIOs on ARM-based MCUs, the input pins are sampled by the clock of the bus
|
|
|
|
|
* to which the GPIO is connected.
|
|
|
|
|
* The connected buses differ depending on the various series of MCUs.
|
|
|
|
|
* And since the instruction execution clock of the CPU and the bus clock of GPIO are different,
|
|
|
|
|
* there is a delay of several clocks to read the change of the input signal.
|
|
|
|
|
*
|
|
|
|
|
* Define this delay with the GPIO_INPUT_PIN_DELAY macro.
|
|
|
|
|
* If the GPIO_INPUT_PIN_DELAY macro is not defined, the following default values will be used.
|
|
|
|
|
* (A fairly large value of 0.25 microseconds is set.)
|
|
|
|
|
*/
|
|
|
|
|
# if !defined(GPIO_INPUT_PIN_DELAY)
|
|
|
|
|
# if defined(STM32_SYSCLK)
|
|
|
|
|
# define GPIO_INPUT_PIN_DELAY (STM32_SYSCLK/1000000L / 4)
|
|
|
|
|
# elif defined(KINETIS_SYSCLK_FREQUENCY)
|
|
|
|
|
# define GPIO_INPUT_PIN_DELAY (KINETIS_SYSCLK_FREQUENCY/1000000L / 4)
|
|
|
|
|
# endif
|
|
|
|
|
# endif
|
|
|
|
|
# define waitInputPinDelay() wait_cpuclock(GPIO_INPUT_PIN_DELAY)
|
2018-09-28 16:33:11 +00:00
|
|
|
#endif
|
|
|
|
|
|
2020-11-28 20:02:18 +00:00
|
|
|
// Atomic macro to help make GPIO and other controls atomic.
|
|
|
|
|
#ifdef IGNORE_ATOMIC_BLOCK
|
|
|
|
|
/* do nothing atomic macro */
|
|
|
|
|
# define ATOMIC_BLOCK for (uint8_t __ToDo = 1; __ToDo; __ToDo = 0)
|
|
|
|
|
# define ATOMIC_BLOCK_RESTORESTATE ATOMIC_BLOCK
|
|
|
|
|
# define ATOMIC_BLOCK_FORCEON ATOMIC_BLOCK
|
|
|
|
|
|
|
|
|
|
#elif defined(__AVR__)
|
|
|
|
|
/* atomic macro for AVR */
|
|
|
|
|
# include <util/atomic.h>
|
|
|
|
|
|
|
|
|
|
# define ATOMIC_BLOCK_RESTORESTATE ATOMIC_BLOCK(ATOMIC_RESTORESTATE)
|
|
|
|
|
# define ATOMIC_BLOCK_FORCEON ATOMIC_BLOCK(ATOMIC_FORCEON)
|
|
|
|
|
|
|
|
|
|
#elif defined(PROTOCOL_CHIBIOS) || defined(PROTOCOL_ARM_ATSAM)
|
|
|
|
|
/* atomic macro for ChibiOS / ARM ATSAM */
|
|
|
|
|
# if defined(PROTOCOL_ARM_ATSAM)
|
|
|
|
|
# include "arm_atsam_protocol.h"
|
|
|
|
|
# endif
|
|
|
|
|
|
|
|
|
|
static __inline__ uint8_t __interrupt_disable__(void) {
|
|
|
|
|
# if defined(PROTOCOL_CHIBIOS)
|
|
|
|
|
chSysLock();
|
|
|
|
|
# endif
|
|
|
|
|
# if defined(PROTOCOL_ARM_ATSAM)
|
|
|
|
|
__disable_irq();
|
|
|
|
|
# endif
|
|
|
|
|
return 1;
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
static __inline__ void __interrupt_enable__(const uint8_t *__s) {
|
|
|
|
|
# if defined(PROTOCOL_CHIBIOS)
|
|
|
|
|
chSysUnlock();
|
|
|
|
|
# endif
|
|
|
|
|
# if defined(PROTOCOL_ARM_ATSAM)
|
|
|
|
|
__enable_irq();
|
|
|
|
|
# endif
|
|
|
|
|
__asm__ volatile("" ::: "memory");
|
|
|
|
|
(void)__s;
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
# define ATOMIC_BLOCK(type) for (type, __ToDo = __interrupt_disable__(); __ToDo; __ToDo = 0)
|
|
|
|
|
# define ATOMIC_FORCEON uint8_t sreg_save __attribute__((__cleanup__(__interrupt_enable__))) = 0
|
|
|
|
|
|
|
|
|
|
# define ATOMIC_BLOCK_RESTORESTATE _Static_assert(0, "ATOMIC_BLOCK_RESTORESTATE dose not implement")
|
|
|
|
|
# define ATOMIC_BLOCK_FORCEON ATOMIC_BLOCK(ATOMIC_FORCEON)
|
|
|
|
|
|
|
|
|
|
/* Other platform */
|
|
|
|
|
#else
|
|
|
|
|
|
|
|
|
|
# define ATOMIC_BLOCK_RESTORESTATE _Static_assert(0, "ATOMIC_BLOCK_RESTORESTATE dose not implement")
|
|
|
|
|
# define ATOMIC_BLOCK_FORCEON _Static_assert(0, "ATOMIC_BLOCK_FORCEON dose not implement")
|
|
|
|
|
|
|
|
|
|
#endif
|
|
|
|
|
|
2019-07-09 18:16:24 +00:00
|
|
|
#define SEND_STRING(string) send_string_P(PSTR(string))
|
2019-11-26 07:16:58 +00:00
|
|
|
#define SEND_STRING_DELAY(string, interval) send_string_with_delay_P(PSTR(string), interval)
|
2019-07-09 18:16:24 +00:00
|
|
|
|
2020-03-02 23:43:18 +00:00
|
|
|
// Look-Up Tables (LUTs) to convert ASCII character to keycode sequence.
|
2019-07-16 06:15:07 +00:00
|
|
|
extern const uint8_t ascii_to_keycode_lut[128];
|
2020-03-02 23:43:18 +00:00
|
|
|
extern const uint8_t ascii_to_shift_lut[16];
|
|
|
|
|
extern const uint8_t ascii_to_altgr_lut[16];
|
2021-01-02 04:54:48 +00:00
|
|
|
extern const uint8_t ascii_to_dead_lut[16];
|
2020-03-02 23:43:18 +00:00
|
|
|
// clang-format off
|
|
|
|
|
#define KCLUT_ENTRY(a, b, c, d, e, f, g, h) \
|
|
|
|
|
( ((a) ? 1 : 0) << 0 \
|
|
|
|
|
| ((b) ? 1 : 0) << 1 \
|
|
|
|
|
| ((c) ? 1 : 0) << 2 \
|
|
|
|
|
| ((d) ? 1 : 0) << 3 \
|
|
|
|
|
| ((e) ? 1 : 0) << 4 \
|
|
|
|
|
| ((f) ? 1 : 0) << 5 \
|
|
|
|
|
| ((g) ? 1 : 0) << 6 \
|
|
|
|
|
| ((h) ? 1 : 0) << 7 )
|
|
|
|
|
// clang-format on
|
2019-07-09 18:16:24 +00:00
|
|
|
|
2016-06-03 19:48:40 +00:00
|
|
|
void send_string(const char *str);
|
2017-06-29 17:02:38 +00:00
|
|
|
void send_string_with_delay(const char *str, uint8_t interval);
|
2017-09-12 04:43:10 +00:00
|
|
|
void send_string_P(const char *str);
|
|
|
|
|
void send_string_with_delay_P(const char *str, uint8_t interval);
|
|
|
|
|
void send_char(char ascii_code);
|
2016-06-02 02:49:55 +00:00
|
|
|
|
2016-06-18 18:30:24 +00:00
|
|
|
// For tri-layer
|
2019-08-30 18:19:03 +00:00
|
|
|
void update_tri_layer(uint8_t layer1, uint8_t layer2, uint8_t layer3);
|
2019-08-22 00:07:49 +00:00
|
|
|
layer_state_t update_tri_layer_state(layer_state_t state, uint8_t layer1, uint8_t layer2, uint8_t layer3);
|
2016-06-29 22:29:20 +00:00
|
|
|
|
2017-07-21 03:57:11 +00:00
|
|
|
void set_single_persistent_default_layer(uint8_t default_layer);
|
|
|
|
|
|
2016-06-29 22:29:20 +00:00
|
|
|
void tap_random_base64(void);
|
|
|
|
|
|
2020-07-16 12:27:55 +00:00
|
|
|
#define IS_LAYER_ON(layer) layer_state_is(layer)
|
|
|
|
|
#define IS_LAYER_OFF(layer) !layer_state_is(layer)
|
|
|
|
|
|
|
|
|
|
#define IS_LAYER_ON_STATE(state, layer) layer_state_cmp(state, layer)
|
|
|
|
|
#define IS_LAYER_OFF_STATE(state, layer) !layer_state_cmp(state, layer)
|
2016-06-18 18:30:24 +00:00
|
|
|
|
2019-08-30 18:19:03 +00:00
|
|
|
void matrix_init_kb(void);
|
|
|
|
|
void matrix_scan_kb(void);
|
|
|
|
|
void matrix_init_user(void);
|
|
|
|
|
void matrix_scan_user(void);
|
2020-04-12 15:27:17 +00:00
|
|
|
uint16_t get_record_keycode(keyrecord_t *record, bool update_layer_cache);
|
|
|
|
|
uint16_t get_event_keycode(keyevent_t event, bool update_layer_cache);
|
2019-08-30 18:19:03 +00:00
|
|
|
bool process_action_kb(keyrecord_t *record);
|
|
|
|
|
bool process_record_kb(uint16_t keycode, keyrecord_t *record);
|
|
|
|
|
bool process_record_user(uint16_t keycode, keyrecord_t *record);
|
2020-03-22 13:29:05 +00:00
|
|
|
void post_process_record_kb(uint16_t keycode, keyrecord_t *record);
|
|
|
|
|
void post_process_record_user(uint16_t keycode, keyrecord_t *record);
|
2016-05-28 19:22:30 +00:00
|
|
|
|
2018-10-27 18:53:50 +00:00
|
|
|
#ifndef BOOTMAGIC_LITE_COLUMN
|
2019-08-30 18:19:03 +00:00
|
|
|
# define BOOTMAGIC_LITE_COLUMN 0
|
2018-10-27 18:53:50 +00:00
|
|
|
#endif
|
|
|
|
|
#ifndef BOOTMAGIC_LITE_ROW
|
2019-08-30 18:19:03 +00:00
|
|
|
# define BOOTMAGIC_LITE_ROW 0
|
2018-10-27 18:53:50 +00:00
|
|
|
#endif
|
|
|
|
|
|
|
|
|
|
void bootmagic_lite(void);
|
|
|
|
|
|
2016-07-13 14:38:02 +00:00
|
|
|
void reset_keyboard(void);
|
|
|
|
|
|
2016-05-24 15:56:53 +00:00
|
|
|
void startup_user(void);
|
|
|
|
|
void shutdown_user(void);
|
2016-05-19 03:14:00 +00:00
|
|
|
|
2018-11-27 22:29:59 +00:00
|
|
|
void register_code16(uint16_t code);
|
|
|
|
|
void unregister_code16(uint16_t code);
|
2018-12-14 17:01:58 +00:00
|
|
|
void tap_code16(uint16_t code);
|
2016-08-18 09:29:53 +00:00
|
|
|
|
2019-08-30 18:19:03 +00:00
|
|
|
void send_dword(uint32_t number);
|
|
|
|
|
void send_word(uint16_t number);
|
|
|
|
|
void send_byte(uint8_t number);
|
|
|
|
|
void send_nibble(uint8_t number);
|
2017-02-15 21:36:31 +00:00
|
|
|
uint16_t hex_to_keycode(uint8_t hex);
|
2016-06-24 02:18:20 +00:00
|
|
|
|
|
|
|
|
void led_set_user(uint8_t usb_led);
|
|
|
|
|
void led_set_kb(uint8_t usb_led);
|
2019-11-06 00:42:16 +00:00
|
|
|
bool led_update_user(led_t led_state);
|
|
|
|
|
bool led_update_kb(led_t led_state);
|
2016-06-24 02:18:20 +00:00
|
|
|
|
2016-11-26 20:37:46 +00:00
|
|
|
void api_send_unicode(uint32_t unicode);
|
