Add support for YMD75 rev 2 (#8853)
This commit is contained in:
Jared Hendry
GitHub
parent
2d39a9dcdb
commit
1522d97c2b
@ -1,19 +1,19 @@
|
||||
# YMD75 / MT84
|
||||
|
||||
75% keyboard from YMDK. YMDK sell the board and name it "YMD75", however the PCB has "MT84" printed on both sides.
|
||||
75% keyboard from YMDK. YMDK sell the board and name it "YMD75", however revision 1 of the PCB has "MT84" printed on both sides.
|
||||
|
||||
* Keyboard Maintainer: [Wayne K Jones](github.com/WarmCatUK)
|
||||
* Hardware Supported: YMD75/MT84 with the ATmega32a chip.
|
||||
* Hardware Supported: YMD75/MT84 (rev1 and rev2) with the ATmega32a chip.
|
||||
* Hardware Availability: <https://www.aliexpress.com/item/32812690592.html>
|
||||
|
||||
Make example for this keyboard (after setting up your build environment):
|
||||
|
||||
make ymd75:default
|
||||
make ymd75/rev1:default
|
||||
|
||||
Flashing example for this keyboard ([after setting up the bootloadHID flashing environment](https://docs.qmk.fm/#/flashing_bootloadhid))
|
||||
|
||||
make ymd75:default:flash
|
||||
make ymd75/rev1:default:flash
|
||||
|
||||
**Reset Key**: Hold down the key located at *Key below the top right key*, commonly programmed as *Backspace* while plugging in the keyboard.
|
||||
**Reset Key**: Hold down the key located at *Key below the top right key*, commonly programmed as *Backspace* while plugging in the keyboard. On PCB revision 2, enter the bootloader by holding `L_CTRL` while plugging in the keyboard.
|
||||
|
||||
See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
|
||||
|
||||
@ -24,16 +24,11 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
#define VENDOR_ID 0x20A0
|
||||
#define PRODUCT_ID 0x422D
|
||||
#define DEVICE_VER 0x0200
|
||||
|
||||
#define MANUFACTURER YMDK
|
||||
#define PRODUCT YMD75 / MT84
|
||||
#define DESCRIPTION 75% Keyboard
|
||||
|
||||
/* matrix size */
|
||||
#define MATRIX_ROWS 8
|
||||
#define MATRIX_COLS 15
|
||||
#define MATRIX_ROW_PINS { B0, B1, B2, B3, B4, B5, B6, B7 }
|
||||
#define MATRIX_COL_PINS { A0, A1, A2, A3, A4, A5, A6, A7, C7, C6, C5, C4, C3, C2, D7 }
|
||||
#define DIODE_DIRECTION COL2ROW
|
||||
|
||||
#define BACKLIGHT_PIN D4
|
||||
#define BACKLIGHT_LEVELS 12
|
||||
|
||||
@ -82,12 +82,12 @@ bool process_record_user(uint16_t keycode, keyrecord_t *record) {
|
||||
if (record->event.pressed) {
|
||||
switch(keycode) {
|
||||
case P_MACRO:
|
||||
SEND_STRING(SS_DOWN(X_LALT));
|
||||
SEND_STRING(SS_TAP(X_KP_1));
|
||||
SEND_STRING(SS_TAP(X_KP_5));
|
||||
SEND_STRING(SS_TAP(X_KP_6));
|
||||
SEND_STRING(SS_UP(X_LALT));
|
||||
return false; break;
|
||||
register_code(KC_LALT);
|
||||
tap_code(KC_KP_1);
|
||||
tap_code(KC_KP_5);
|
||||
tap_code(KC_KP_6);
|
||||
unregister_code(KC_LALT);
|
||||
return false;
|
||||
}
|
||||
}
|
||||
return true;
|
||||
|
||||
27
keyboards/ymd75/rev1/config.h
Normal file
27
keyboards/ymd75/rev1/config.h
Normal file
@ -0,0 +1,27 @@
|
||||
/*
|
||||
Base Copyright 2017 Luiz Ribeiro <luizribeiro@gmail.com>
|
||||
Modified 2017 Andrew Novak <ndrw.nvk@gmail.com>
|
||||
Modified 2018 Wayne Jones (WarmCatUK) <waynekjones@gmail.com>
|
||||
|
||||
This program is free software: you can redistribute it and/or modify
|
||||
it under the terms of the GNU General Public License as published by
|
||||
the Free Software Foundation, either version 2 of the License, or
|
||||
(at your option) any later version.
|
||||
|
||||
This program is distributed in the hope that it will be useful,
|
||||
but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
GNU General Public License for more details.
|
||||
|
||||
You should have received a copy of the GNU General Public License
|
||||
along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
*/
|
||||
|
||||
#pragma once
|
||||
|
||||
/* matrix size */
|
||||
#define MATRIX_ROWS 8
|
||||
#define MATRIX_COLS 15
|
||||
#define MATRIX_ROW_PINS { B0, B1, B2, B3, B4, B5, B6, B7 }
|
||||
#define MATRIX_COL_PINS { A0, A1, A2, A3, A4, A5, A6, A7, C7, C6, C5, C4, C3, C2, D7 }
|
||||
#define DIODE_DIRECTION COL2ROW
|
||||
34
keyboards/ymd75/rev1/rev1.c
Normal file
34
keyboards/ymd75/rev1/rev1.c
Normal file
@ -0,0 +1,34 @@
|
||||
/*
|
||||
Copyright 2017 Luiz Ribeiro <luizribeiro@gmail.com>
|
||||
|
||||
This program is free software: you can redistribute it and/or modify
|
||||
it under the terms of the GNU General Public License as published by
|
||||
the Free Software Foundation, either version 2 of the License, or
|
||||
(at your option) any later version.
|
||||
|
||||
This program is distributed in the hope that it will be useful,
|
||||
but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
GNU General Public License for more details.
|
||||
|
||||
You should have received a copy of the GNU General Public License
|
||||
along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
*/
|
||||
|
||||
#include "ymd75.h"
|
||||
|
||||
void keyboard_pre_init_kb(void) {
|
||||
led_init_ports();
|
||||
keyboard_pre_init_user();
|
||||
}
|
||||
|
||||
void led_init_ports(void) {
|
||||
setPinOutput(D1);
|
||||
}
|
||||
|
||||
bool led_update_kb(led_t led_state) {
|
||||
if (led_update_user(led_state)) {
|
||||
writePin(D1, led_state.caps_lock);
|
||||
}
|
||||
return true;
|
||||
}
|
||||
39
keyboards/ymd75/rev1/rev1.h
Normal file
39
keyboards/ymd75/rev1/rev1.h
Normal file
@ -0,0 +1,39 @@
|
||||
/*
|
||||
Base Copyright 2017 Luiz Ribeiro <luizribeiro@gmail.com>
|
||||
Modified 2017 Andrew Novak <ndrw.nvk@gmail.com>
|
||||
Modified 2018 Wayne Jones (WarmCatUK) <waynekjones@gmail.com>
|
||||
|
||||
This program is free software: you can redistribute it and/or modify
|
||||
it under the terms of the GNU General Public License as published by
|
||||
the Free Software Foundation, either version 2 of the License, or
|
||||
(at your option) any later version.
|
||||
|
||||
This program is distributed in the hope that it will be useful,
|
||||
but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
GNU General Public License for more details.
|
||||
|
||||
You should have received a copy of the GNU General Public License
|
||||
along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
*/
|
||||
|
||||
#pragma once
|
||||
#include "quantum.h"
|
||||
|
||||
#define LAYOUT( \
|
||||
K05, K25, K35, K45, K55, K06, KA6, KA7, K07, KB5, KC5, KD5, KE5, KD1, KE1, KE2, \
|
||||
K04, K14, K24, K34, K44, K54, K16, KB6, KB7, K17, KA4, KB4, KC4, KE4, KD0, \
|
||||
K03, K13, K23, K33, K43, K53, K26, KC6, KC7, K27, KA3, KB3, KC3, KD3, K67, \
|
||||
K02, K12, K22, K32, K42, K52, K36, KD6, KD7, K37, KA2, KB2, KD2, KE0, \
|
||||
K01, K11, K21, K31, K41, K51, K46, KE6, KE7, K47, KA1, KB1, K86, K77, \
|
||||
K00, K10, K20, K56, K57, KB0, KC0, K96, K76, K66 \
|
||||
){ \
|
||||
{ K00, K10, K20, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KB0, KC0, KD0, KC_NO }, \
|
||||
{ K01, K11, K21, K31, K41, K51, KC_NO, KC_NO, KC_NO, KC_NO, KA1, KB1, KC_NO, KD1, KE1 }, \
|
||||
{ K02, K12, K22, K32, K42, K52, KC_NO, KC_NO, KC_NO, KC_NO, KA2, KB2, KC_NO, KD2, KE2 }, \
|
||||
{ K03, K13, K23, K33, K43, K53, KC_NO, KC_NO, KC_NO, KC_NO, KA3, KB3, KC3, KD3, KC_NO }, \
|
||||
{ K04, K14, K24, K34, K44, K54, KC_NO, KC_NO, KC_NO, KC_NO, KA4, KB4, KC4, KC_NO, KE4 }, \
|
||||
{ K05, KC_NO, K25, K35, K45, K55, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KB5, KC5, KD5, KE5 }, \
|
||||
{ K06, K16, K26, K36, K46, K56, K66, K76, K86, K96, KA6, KB6, KC6, KD6, KE6 }, \
|
||||
{ K07, K17, K27, K37, K47, K57, K67, K77, KE0, KC_NO, KA7, KB7, KC7, KD7, KE7 } \
|
||||
}
|
||||
15
keyboards/ymd75/rev1/rules.mk
Normal file
15
keyboards/ymd75/rev1/rules.mk
Normal file
@ -0,0 +1,15 @@
|
||||
# build options
|
||||
BOOTMAGIC_ENABLE = yes
|
||||
MOUSEKEY_ENABLE = no
|
||||
EXTRAKEY_ENABLE = yes
|
||||
CONSOLE_ENABLE = no
|
||||
COMMAND_ENABLE = yes
|
||||
BACKLIGHT_ENABLE = yes
|
||||
RGBLIGHT_ENABLE = yes
|
||||
WS2812_DRIVER = i2c
|
||||
NKRO_ENABLE = no
|
||||
# Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
|
||||
|
||||
KEY_LOCK_ENABLE = yes
|
||||
# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
|
||||
SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
|
||||
8
keyboards/ymd75/rev2/config.h
Normal file
8
keyboards/ymd75/rev2/config.h
Normal file
@ -0,0 +1,8 @@
|
||||
#pragma once
|
||||
|
||||
/* matrix size */
|
||||
#define MATRIX_ROWS 6
|
||||
#define MATRIX_COLS 15
|
||||
#define MATRIX_ROW_PINS { B7, B6, B5, B4, B3, B0 }
|
||||
#define MATRIX_COL_PINS { A0, A1, A2, A3, A4, A5, A6, A7, C7, C6, C5, C4, C3, C2, D7 }
|
||||
#define DIODE_DIRECTION COL2ROW
|
||||
34
keyboards/ymd75/rev2/rev2.c
Normal file
34
keyboards/ymd75/rev2/rev2.c
Normal file
@ -0,0 +1,34 @@
|
||||
/*
|
||||
Copyright 2017 Luiz Ribeiro <luizribeiro@gmail.com>
|
||||
|
||||
This program is free software: you can redistribute it and/or modify
|
||||
it under the terms of the GNU General Public License as published by
|
||||
the Free Software Foundation, either version 2 of the License, or
|
||||
(at your option) any later version.
|
||||
|
||||
This program is distributed in the hope that it will be useful,
|
||||
but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
GNU General Public License for more details.
|
||||
|
||||
You should have received a copy of the GNU General Public License
|
||||
along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
*/
|
||||
|
||||
#include "ymd75.h"
|
||||
|
||||
void keyboard_pre_init_kb(void) {
|
||||
led_init_ports();
|
||||
keyboard_pre_init_user();
|
||||
}
|
||||
|
||||
void led_init_ports(void) {
|
||||
setPinOutput(D1);
|
||||
}
|
||||
|
||||
bool led_update_kb(led_t led_state) {
|
||||
if (led_update_user(led_state)) {
|
||||
writePin(D1, led_state.caps_lock);
|
||||
}
|
||||
return true;
|
||||
}
|
||||
18
keyboards/ymd75/rev2/rev2.h
Normal file
18
keyboards/ymd75/rev2/rev2.h
Normal file
@ -0,0 +1,18 @@
|
||||
#pragma once
|
||||
#include "quantum.h"
|
||||
|
||||
#define LAYOUT( \
|
||||
K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012, K013, K014, K514, \
|
||||
K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, K114, K513, \
|
||||
K200, K201, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212, K213, K214, \
|
||||
K300, K301, K302, K303, K304, K305, K306, K307, K308, K309, K310, K311, K313, K314, \
|
||||
K400, K402, K403, K404, K405, K406, K407, K408, K409, K410, K411, K412, K413, K414, \
|
||||
K500, K501, K502, K505, K506, K507, K508, K509, K510, K511 \
|
||||
) { \
|
||||
{ K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012, K013, K014 }, \
|
||||
{ K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, KC_NO, K114 }, \
|
||||
{ K200, K201, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212, K213, K214 }, \
|
||||
{ K300, K301, K302, K303, K304, K305, K306, K307, K308, K309, K310, K311, KC_NO, K313, K314 }, \
|
||||
{ K400, KC_NO, K402, K403, K404, K405, K406, K407, K408, K409, K410, K411, K412, K413, K414 }, \
|
||||
{ K500, K501, K502, KC_NO, KC_NO, K505, K506, K507, K508, K509, K510, K511, KC_NO, K513, K514 } \
|
||||
}
|
||||
15
keyboards/ymd75/rev2/rules.mk
Normal file
15
keyboards/ymd75/rev2/rules.mk
Normal file
@ -0,0 +1,15 @@
|
||||
# build options
|
||||
BOOTMAGIC_ENABLE = yes
|
||||
MOUSEKEY_ENABLE = no
|
||||
EXTRAKEY_ENABLE = yes
|
||||
CONSOLE_ENABLE = no
|
||||
COMMAND_ENABLE = yes
|
||||
BACKLIGHT_ENABLE = yes
|
||||
RGBLIGHT_ENABLE = yes
|
||||
WS2812_DRIVER = i2c
|
||||
NKRO_ENABLE = no
|
||||
# Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
|
||||
|
||||
KEY_LOCK_ENABLE = yes
|
||||
# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
|
||||
SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
|
||||
@ -11,20 +11,4 @@ MCU = atmega32a
|
||||
# ATmega328P USBasp
|
||||
BOOTLOADER = bootloadHID
|
||||
|
||||
# build options
|
||||
BOOTMAGIC_ENABLE = yes
|
||||
MOUSEKEY_ENABLE = no
|
||||
EXTRAKEY_ENABLE = yes
|
||||
CONSOLE_ENABLE = no
|
||||
COMMAND_ENABLE = yes
|
||||
BACKLIGHT_ENABLE = yes
|
||||
RGBLIGHT_ENABLE = yes
|
||||
WS2812_DRIVER = i2c
|
||||
NKRO_ENABLE = no
|
||||
# Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
|
||||
|
||||
DISABLE_WS2812 = no
|
||||
|
||||
KEY_LOCK_ENABLE = yes
|
||||
# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
|
||||
SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
|
||||
DEFAULT_FOLDER = ymd75/rev1
|
||||
|
||||
@ -1,34 +1 @@
|
||||
/*
|
||||
Copyright 2017 Luiz Ribeiro <luizribeiro@gmail.com>
|
||||
|
||||
This program is free software: you can redistribute it and/or modify
|
||||
it under the terms of the GNU General Public License as published by
|
||||
the Free Software Foundation, either version 2 of the License, or
|
||||
(at your option) any later version.
|
||||
|
||||
This program is distributed in the hope that it will be useful,
|
||||
but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
GNU General Public License for more details.
|
||||
|
||||
You should have received a copy of the GNU General Public License
|
||||
along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
*/
|
||||
|
||||
#include "ymd75.h"
|
||||
|
||||
void keyboard_pre_init_kb(void) {
|
||||
led_init_ports();
|
||||
keyboard_pre_init_user();
|
||||
}
|
||||
|
||||
void led_init_ports(void) {
|
||||
setPinOutput(D1);
|
||||
}
|
||||
|
||||
bool led_update_kb(led_t led_state) {
|
||||
if (led_update_user(led_state)) {
|
||||
writePin(D1, led_state.caps_lock);
|
||||
}
|
||||
return true;
|
||||
}
|
||||
|
||||
@ -1,55 +1,9 @@
|
||||
/*
|
||||
Base Copyright 2017 Luiz Ribeiro <luizribeiro@gmail.com>
|
||||
Modified 2017 Andrew Novak <ndrw.nvk@gmail.com>
|
||||
Modified 2018 Wayne Jones (WarmCatUK) <waynekjones@gmail.com>
|
||||
|
||||
This program is free software: you can redistribute it and/or modify
|
||||
it under the terms of the GNU General Public License as published by
|
||||
the Free Software Foundation, either version 2 of the License, or
|
||||
(at your option) any later version.
|
||||
|
||||
This program is distributed in the hope that it will be useful,
|
||||
but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
GNU General Public License for more details.
|
||||
|
||||
You should have received a copy of the GNU General Public License
|
||||
along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
*/
|
||||
|
||||
#ifndef KEYMAP_COMMON_H
|
||||
#define KEYMAP_COMMON_H
|
||||
#pragma once
|
||||
|
||||
#include "quantum.h"
|
||||
#include "quantum_keycodes.h"
|
||||
#include "keycode.h"
|
||||
#include "action.h"
|
||||
|
||||
#define LAYOUT( \
|
||||
K05, K25, K35, K45, K55, K06, KA6, KA7, K07, KB5, KC5, KD5, KE5, KD1, KE1, KE2, \
|
||||
K04, K14, K24, K34, K44, K54, K16, KB6, KB7, K17, KA4, KB4, KC4, KE4, KD0, \
|
||||
K03, K13, K23, K33, K43, K53, K26, KC6, KC7, K27, KA3, KB3, KC3, KD3, K67, \
|
||||
K02, K12, K22, K32, K42, K52, K36, KD6, KD7, K37, KA2, KB2, KD2, KE0, \
|
||||
K01, K11, K21, K31, K41, K51, K46, KE6, KE7, K47, KA1, KB1, K86, K77, \
|
||||
K00, K10, K20, K56, K57, KB0, KC0, K96, K76, K66 \
|
||||
){ \
|
||||
{ K00, K10, K20, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KB0, KC0, KD0, KC_NO }, \
|
||||
{ K01, K11, K21, K31, K41, K51, KC_NO, KC_NO, KC_NO, KC_NO, KA1, KB1, KC_NO, KD1, KE1 }, \
|
||||
{ K02, K12, K22, K32, K42, K52, KC_NO, KC_NO, KC_NO, KC_NO, KA2, KB2, KC_NO, KD2, KE2 }, \
|
||||
{ K03, K13, K23, K33, K43, K53, KC_NO, KC_NO, KC_NO, KC_NO, KA3, KB3, KC3, KD3, KC_NO }, \
|
||||
{ K04, K14, K24, K34, K44, K54, KC_NO, KC_NO, KC_NO, KC_NO, KA4, KB4, KC4, KC_NO, KE4 }, \
|
||||
{ K05, KC_NO, K25, K35, K45, K55, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KB5, KC5, KD5, KE5 }, \
|
||||
{ K06, K16, K26, K36, K46, K56, K66, K76, K86, K96, KA6, KB6, KC6, KD6, KE6 }, \
|
||||
{ K07, K17, K27, K37, K47, K57, K67, K77, KE0, KC_NO, KA7, KB7, KC7, KD7, KE7 } \
|
||||
}
|
||||
|
||||
#if defined(KEYBOARD_ymd75_rev1)
|
||||
#include "rev1.h"
|
||||
#elif defined(KEYBOARD_ymd75_rev2)
|
||||
#include "rev2.h"
|
||||
#endif
|
||||
|
||||
|
||||
|
||||
|
||||
|
||||
|
||||
|
||||
|
||||
|
||||
|
||||
Loading…
Reference in New Issue
Block a user