Initial commit for Planck PCB Rev 1.
- Backlight on PB7 controlled by Timer1 Fast PWM (no interrupts). - Backlight commands connected temporarily to top left keys. - Backlight init called from matrix.c, since there's no generic keyboard_init() override function.
This commit is contained in:
parent
0fcb3b65f8
commit
15b9bce6ba
@ -50,7 +50,8 @@ TARGET_DIR = .
|
||||
# project specific files
|
||||
SRC = keymap_common.c \
|
||||
matrix.c \
|
||||
led.c
|
||||
led.c \
|
||||
backlight.c
|
||||
|
||||
ifdef KEYMAP
|
||||
SRC := keymap_$(KEYMAP).c $(SRC)
|
||||
@ -118,9 +119,10 @@ MOUSEKEY_ENABLE = yes # Mouse keys(+4700)
|
||||
EXTRAKEY_ENABLE = yes # Audio control and System control(+450)
|
||||
CONSOLE_ENABLE = yes # Console for debug(+400)
|
||||
COMMAND_ENABLE = yes # Commands for debug and configuration
|
||||
# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
|
||||
#SLEEP_LED_ENABLE = yes # Breathing sleep LED during USB suspend
|
||||
NKRO_ENABLE = yes # USB Nkey Rollover - not yet supported in LUFA
|
||||
|
||||
BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality
|
||||
|
||||
# Optimize size but this may cause error "relocation truncated to fit"
|
||||
#EXTRALDFLAGS = -Wl,--relax
|
||||
|
@ -34,6 +34,10 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
/* define if matrix has ghost */
|
||||
//#define MATRIX_HAS_GHOST
|
||||
|
||||
/* number of backlight levels */
|
||||
/* NOTE: this is the max value of 0..BACKLIGHT_LEVELS so really 16 levels. */
|
||||
#define BACKLIGHT_LEVELS 15
|
||||
|
||||
/* Set 0 if debouncing isn't needed */
|
||||
#define DEBOUNCE 5
|
||||
|
||||
|
56
keyboard/planck/keymap_wilba.c
Normal file
56
keyboard/planck/keymap_wilba.c
Normal file
@ -0,0 +1,56 @@
|
||||
#include "keymap_common.h"
|
||||
|
||||
const uint8_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
|
||||
[0] = KEYMAP( /* Wilba */
|
||||
FN27, FN28, FN29, E, R, T, Y, U, I, O, P, BSPC,
|
||||
TAB, A, S, D, F, G, H, J, K, L, SCLN, QUOT,
|
||||
LSFT, Z, X, C, V, B, N, M, COMM, DOT, SLSH, ENT,
|
||||
LCTL, LGUI, LALT, RSFT, FN1, SPC, FN2, LEFT, DOWN, UP, RGHT),
|
||||
[1] = KEYMAP( /* Wilba Alternate */
|
||||
ESC, Q, W, E, R, T, Y, U, I, O, P, BSPC,
|
||||
TAB, A, S, D, F, G, H, J, K, L, SCLN, QUOT,
|
||||
LSFT, Z, X, C, V, B, N, M, COMM, DOT, SLSH, ENT,
|
||||
LCTL, LGUI, LALT, RSFT, FN1, SPC, FN2, LEFT, DOWN, UP, RGHT),
|
||||
[2] = KEYMAP( /* Wilba LOWER */
|
||||
TRNS, 1, 2, 3, 4, 5, 6, 7, 8, 9, 0, TRNS,
|
||||
TRNS, F11, F12, LBRC, RBRC, FN20, EQL, FN23, FN24, MINS, FN21, TRNS,
|
||||
TRNS, BSLS, GRV, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS,
|
||||
TRNS, TRNS, TRNS, TRNS, FN1, TRNS, TRNS, MNXT, VOLD, VOLU, MPLY),
|
||||
[3] = KEYMAP( /* Wilba RAISE */
|
||||
TRNS, FN10, FN11, FN12, FN13, FN14, FN15, FN16, FN17, FN18, FN19, TRNS,
|
||||
TRNS, F1, F2, F3, F4, F5, F6, F7, F8, F9, F10, TRNS,
|
||||
TRNS, FN25, FN22, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS,
|
||||
TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, FN2, TRNS, TRNS, TRNS, TRNS),
|
||||
};
|
||||
const uint16_t PROGMEM fn_actions[] = {
|
||||
[1] = ACTION_LAYER_MOMENTARY(2), // LOWER
|
||||
[2] = ACTION_LAYER_MOMENTARY(3), // RAISE
|
||||
|
||||
[3] = ACTION_DEFAULT_LAYER_SET(0),
|
||||
[4] = ACTION_DEFAULT_LAYER_SET(1),
|
||||
|
||||
[10] = ACTION_MODS_KEY(MOD_LSFT, KC_1), // !
|
||||
[11] = ACTION_MODS_KEY(MOD_LSFT, KC_2), // @
|
||||
[12] = ACTION_MODS_KEY(MOD_LSFT, KC_3), // #
|
||||
[13] = ACTION_MODS_KEY(MOD_LSFT, KC_4), // $
|
||||
[14] = ACTION_MODS_KEY(MOD_LSFT, KC_5), // %
|
||||
[15] = ACTION_MODS_KEY(MOD_LSFT, KC_6), // ^
|
||||
[16] = ACTION_MODS_KEY(MOD_LSFT, KC_7), // &
|
||||
[17] = ACTION_MODS_KEY(MOD_LSFT, KC_8), // *
|
||||
[18] = ACTION_MODS_KEY(MOD_LSFT, KC_9), // (
|
||||
[19] = ACTION_MODS_KEY(MOD_LSFT, KC_0), // )
|
||||
|
||||
[20] = ACTION_MODS_KEY(MOD_LSFT, KC_MINS), // _
|
||||
[21] = ACTION_MODS_KEY(MOD_LSFT, KC_EQL), // +
|
||||
[22] = ACTION_MODS_KEY(MOD_LSFT, KC_GRV), // ~
|
||||
[23] = ACTION_MODS_KEY(MOD_LSFT, KC_LBRC), // {
|
||||
[24] = ACTION_MODS_KEY(MOD_LSFT, KC_RBRC), // }
|
||||
[25] = ACTION_MODS_KEY(MOD_LSFT, KC_BSLS), // |
|
||||
|
||||
[26] = ACTION_MODS_KEY(MOD_LSFT | MOD_RSFT, KC_PAUSE),
|
||||
|
||||
[27] = ACTION_BACKLIGHT_TOGGLE(),
|
||||
[28] = ACTION_BACKLIGHT_INCREASE(),
|
||||
[29] = ACTION_BACKLIGHT_DECREASE()
|
||||
|
||||
};
|
@ -22,13 +22,17 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
|
||||
void led_set(uint8_t usb_led)
|
||||
{
|
||||
// if (usb_led & (1<<USB_LED_FUNCTION)) {
|
||||
// // Output high.
|
||||
// DDRF |= (1<<0);
|
||||
// PORTF |= (1<<0);
|
||||
// } else {
|
||||
// // Output low.
|
||||
// DDRF &= ~(1<<0);
|
||||
// PORTF &= ~(1<<0);
|
||||
// }
|
||||
// Using PE6 Caps Lock LED
|
||||
if (usb_led & (1<<USB_LED_CAPS_LOCK))
|
||||
{
|
||||
// Output high.
|
||||
DDRE |= (1<<6);
|
||||
PORTE |= (1<<6);
|
||||
}
|
||||
else
|
||||
{
|
||||
// Output low.
|
||||
DDRE &= ~(1<<6);
|
||||
PORTE &= ~(1<<6);
|
||||
}
|
||||
}
|
||||
|
@ -27,6 +27,7 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
#include "debug.h"
|
||||
#include "util.h"
|
||||
#include "matrix.h"
|
||||
#include "backlight.h" // TODO fix this dependency
|
||||
|
||||
|
||||
#ifndef DEBOUNCE
|
||||
@ -57,6 +58,13 @@ uint8_t matrix_cols(void)
|
||||
|
||||
void matrix_init(void)
|
||||
{
|
||||
// To use PORTF disable JTAG with writing JTD bit twice within four cycles.
|
||||
MCUCR |= (1<<JTD);
|
||||
MCUCR |= (1<<JTD);
|
||||
|
||||
// TODO fix this dependency
|
||||
backlight_init_ports();
|
||||
|
||||
// initialize row and col
|
||||
unselect_rows();
|
||||
init_cols();
|
||||
@ -134,10 +142,19 @@ uint8_t matrix_key_count(void)
|
||||
return count;
|
||||
}
|
||||
|
||||
//
|
||||
// Planck PCB Rev 1 Pin Assignments
|
||||
//
|
||||
// Column: 0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11
|
||||
// Pin: F1, F0, B0, C7, F4, F5, F6, F7, D4, D6, B4, D7
|
||||
//
|
||||
|
||||
static void init_cols(void)
|
||||
{
|
||||
DDRB &= ~(1<<6 | 1<<5 | 1<<4);
|
||||
PORTB |= (1<<6 | 1<<5 | 1<<4);
|
||||
DDRB &= ~(1<<4 | 1<<0);
|
||||
PORTB |= (1<<4 | 1<<0);
|
||||
DDRC &= ~(1<<7);
|
||||
PORTC |= (1<<7);
|
||||
DDRD &= ~(1<<7 | 1<<6 | 1<<4);
|
||||
PORTD |= (1<<7 | 1<<6 | 1<<4);
|
||||
DDRF &= ~(1<<0 | 1<<1 | 1<<4 | 1<<5 | 1<<6 | 1<<7);
|
||||
@ -147,46 +164,55 @@ static void init_cols(void)
|
||||
|
||||
static matrix_row_t read_cols(void)
|
||||
{
|
||||
return (PIND&(1<<4) ? 0 : (1<<0)) |
|
||||
(PIND&(1<<6) ? 0 : (1<<1)) |
|
||||
(PIND&(1<<7) ? 0 : (1<<2)) |
|
||||
(PINB&(1<<4) ? 0 : (1<<3)) |
|
||||
(PINB&(1<<5) ? 0 : (1<<4)) |
|
||||
(PINB&(1<<6) ? 0 : (1<<5)) |
|
||||
(PINF&(1<<7) ? 0 : (1<<6)) |
|
||||
(PINF&(1<<6) ? 0 : (1<<7)) |
|
||||
(PINF&(1<<5) ? 0 : (1<<8)) |
|
||||
(PINF&(1<<4) ? 0 : (1<<9)) |
|
||||
(PINF&(1<<1) ? 0 : (1<<10)) |
|
||||
(PINF&(1<<0) ? 0 : (1<<11));
|
||||
return (PINF&(1<<1) ? 0 : (1<<0)) |
|
||||
(PINF&(1<<0) ? 0 : (1<<1)) |
|
||||
(PINB&(1<<0) ? 0 : (1<<2)) |
|
||||
(PINC&(1<<7) ? 0 : (1<<3)) |
|
||||
(PINF&(1<<4) ? 0 : (1<<4)) |
|
||||
(PINF&(1<<5) ? 0 : (1<<5)) |
|
||||
(PINF&(1<<6) ? 0 : (1<<6)) |
|
||||
(PINF&(1<<7) ? 0 : (1<<7)) |
|
||||
(PIND&(1<<4) ? 0 : (1<<8)) |
|
||||
(PIND&(1<<6) ? 0 : (1<<9)) |
|
||||
(PINB&(1<<4) ? 0 : (1<<10)) |
|
||||
(PIND&(1<<7) ? 0 : (1<<11));
|
||||
|
||||
}
|
||||
|
||||
static void unselect_rows(void)
|
||||
{
|
||||
DDRB &= ~(1<<0 | 1<<1 | 1<<2 | 1<<3);
|
||||
PORTB |= (1<<0 | 1<<1 | 1<<2 | 1<<3);
|
||||
DDRB &= ~(1<<5 | 1<<6);
|
||||
PORTB |= (1<<5 | 1<<6);
|
||||
DDRD &= ~(1<<0 | 1<<5);
|
||||
PORTD |= (1<<0 | 1<<5);
|
||||
|
||||
}
|
||||
|
||||
//
|
||||
// Planck PCB Rev 1 Pin Assignments
|
||||
//
|
||||
// Row: 0, 1, 2, 3
|
||||
// Pin: D0, D5, B5, B6
|
||||
//
|
||||
|
||||
static void select_row(uint8_t row)
|
||||
{
|
||||
switch (row) {
|
||||
case 0:
|
||||
DDRB |= (1<<0);
|
||||
PORTB &= ~(1<<0);
|
||||
DDRD |= (1<<0);
|
||||
PORTD &= ~(1<<0);
|
||||
break;
|
||||
case 1:
|
||||
DDRB |= (1<<1);
|
||||
PORTB &= ~(1<<1);
|
||||
DDRD |= (1<<5);
|
||||
PORTD &= ~(1<<5);
|
||||
break;
|
||||
case 2:
|
||||
DDRB |= (1<<2);
|
||||
PORTB &= ~(1<<2);
|
||||
DDRB |= (1<<5);
|
||||
PORTB &= ~(1<<5);
|
||||
break;
|
||||
case 3:
|
||||
DDRB |= (1<<3);
|
||||
PORTB &= ~(1<<3);
|
||||
DDRB |= (1<<6);
|
||||
PORTB &= ~(1<<6);
|
||||
break;
|
||||
|
||||
}
|
||||
|
Loading…
Reference in New Issue
Block a user