Merge branch 'master' of github.com:qmk/qmk_firmware into handwire
This commit is contained in:
Jack Humbert
commit
4bdde668e1
@ -1,40 +1,25 @@
|
||||
# Frequently Asked Build Questions
|
||||
|
||||
This page covers questions about building QMK. If you have not yet you should read the [Build Environment Setup](getting_started_build_tools.md) and [Make Instructions](getting_started_make_guide.md) guides.
|
||||
This page covers questions about building QMK. If you haven't yet done so, you should read the [Build Environment Setup](getting_started_build_tools.md) and [Make Instructions](getting_started_make_guide.md) guides.
|
||||
|
||||
## Can't Program on Linux
|
||||
You will need proper permission to operate a device. For Linux users see udev rules below. Easy way is to use `sudo` command, if you are not familiar with this command check its manual with `man sudo` or this page on line.
|
||||
You will need proper permissions to operate a device. For Linux users, see the instructions regarding `udev` rules, below. If you have issues with `udev`, a work-around is to use the `sudo` command. If you are not familiar with this command, check its manual with `man sudo` or [see this webpage](https://linux.die.net/man/8/sudo).
|
||||
|
||||
In short when your controller is ATMega32u4,
|
||||
An example of using `sudo`, when your controller is ATMega32u4:
|
||||
|
||||
$ sudo dfu-programmer atmega32u4 erase --force
|
||||
$ sudo dfu-programmer atmega32u4 flash your.hex
|
||||
$ sudo dfu-programmer atmega32u4 reset
|
||||
|
||||
or just
|
||||
or just:
|
||||
|
||||
$ sudo make <keyboard>:<keymap>:dfu
|
||||
|
||||
But to run `make` with root privilege is not good idea. Use former method if possible.
|
||||
|
||||
## WINAVR is Obsolete
|
||||
It is no longer recommended and may cause some problem.
|
||||
See [TMK Issue #99](https://github.com/tmk/tmk_keyboard/issues/99).
|
||||
|
||||
## USB VID and PID
|
||||
You can use any ID you want with editing `config.h`. Using any presumably unused ID will be no problem in fact except for very low chance of collision with other product.
|
||||
|
||||
Most boards in QMK use `0xFEED` as the vendor ID. You should look through other keyboards to make sure you pick a unique Product ID.
|
||||
|
||||
Also see this.
|
||||
https://github.com/tmk/tmk_keyboard/issues/150
|
||||
|
||||
You can buy a really unique VID:PID here. I don't think you need this for personal use.
|
||||
- http://www.obdev.at/products/vusb/license.html
|
||||
- http://www.mcselec.com/index.php?page=shop.product_details&flypage=shop.flypage&product_id=92&option=com_phpshop&Itemid=1
|
||||
Note that running `make` with `sudo` is generally *not* a good idea, and you should use one of the former methods, if possible.
|
||||
|
||||
## Linux `udev` Rules
|
||||
On Linux you need proper privilege to access device file of MCU, you'll have to use `sudo` when flashing firmware. You can circumvent this with placing these files in `/etc/udev/rules.d/`.
|
||||
On Linux, you'll need proper privileges to access the MCU. You can either use
|
||||
`sudo` when flashing firmware, or place these files in `/etc/udev/rules.d/`.
|
||||
|
||||
**/etc/udev/rules.d/50-atmel-dfu.rules:**
|
||||
```
|
||||
@ -52,6 +37,21 @@ SUBSYSTEMS=="usb", ATTRS{idVendor}=="03eb", ATTRS{idProduct}=="2ff0", MODE:="066
|
||||
SUBSYSTEMS=="usb", ATTRS{idVendor}=="feed", MODE:="0666"
|
||||
```
|
||||
|
||||
## WINAVR is Obsolete
|
||||
It is no longer recommended and may cause some problem.
|
||||
See [TMK Issue #99](https://github.com/tmk/tmk_keyboard/issues/99).
|
||||
|
||||
## USB VID and PID
|
||||
You can use any ID you want with editing `config.h`. Using any presumably unused ID will be no problem in fact except for very low chance of collision with other product.
|
||||
|
||||
Most boards in QMK use `0xFEED` as the vendor ID. You should look through other keyboards to make sure you pick a unique Product ID.
|
||||
|
||||
Also see this.
|
||||
https://github.com/tmk/tmk_keyboard/issues/150
|
||||
|
||||
You can buy a really unique VID:PID here. I don't think you need this for personal use.
|
||||
- http://www.obdev.at/products/vusb/license.html
|
||||
- http://www.mcselec.com/index.php?page=shop.product_details&flypage=shop.flypage&product_id=92&option=com_phpshop&Itemid=1
|
||||
|
||||
## Cortex: `cstddef: No such file or directory`
|
||||
GCC 4.8 of Ubuntu 14.04 had this problem and had to update to 4.9 with this PPA.
|
||||
@ -61,7 +61,6 @@ https://github.com/tmk/tmk_keyboard/issues/212
|
||||
https://github.com/tmk/tmk_keyboard/wiki/mbed-cortex-porting#compile-error-cstddef
|
||||
https://developer.mbed.org/forum/mbed/topic/5205/
|
||||
|
||||
|
||||
## `clock_prescale_set` and `clock_div_1` Not Available
|
||||
Your toolchain is too old to support the MCU. For example WinAVR 20100110 doesn't support ATMega32u2.
|
||||
|
||||
|
||||
@ -31,11 +31,14 @@ git
|
||||
|
||||
Install the dependencies with your favorite package manager.
|
||||
|
||||
Debian/Ubuntu example:
|
||||
Debian / Ubuntu example:
|
||||
|
||||
sudo apt-get update
|
||||
sudo apt-get install gcc unzip wget zip gcc-avr binutils-avr avr-libc dfu-programmer dfu-util gcc-arm-none-eabi binutils-arm-none-eabi libnewlib-arm-none-eabi
|
||||
|
||||
Fedora / Red Hat example:
|
||||
sudo dnf install gcc unzip wget zip dfu-util dfu-programmer avr-gcc avr-libc binutils-avr32-linux-gnu arm-none-eabi-gcc-cs arm-none-eabi-binutils-cs arm-none-eabi-newlib
|
||||
|
||||
## Nix
|
||||
|
||||
If you're on [NixOS](https://nixos.org/), or have Nix installed on Linux or macOS, run `nix-shell` from the repository root to get a build environment.
|
||||
|
||||
@ -33,7 +33,7 @@ The state of the Keymap layer is determined by two 32 bit parameters:
|
||||
* **`default_layer_state`** indicates a base keymap layer (0-31) which is always valid and to be referred (the default layer).
|
||||
* **`layer_state`** has current on/off status of each layer in its bits.
|
||||
|
||||
Keymap layer '0' is usually `default_layer`, wither other layers initially off after booting up the firmware, although this can configured differently in `config.h`. It is useful to change `default_layer` when you completely switch a key layout, for example, if you want to switch to Colemak instead of Qwerty.
|
||||
Keymap layer '0' is usually the `default_layer`, with other layers initially off after booting up the firmware, although this can configured differently in `config.h`. It is useful to change `default_layer` when you completely switch a key layout, for example, if you want to switch to Colemak instead of Qwerty.
|
||||
|
||||
Initial state of Keymap Change base layout
|
||||
----------------------- ------------------
|
||||
|
||||
1
keyboards/1up60rgb/1up60rgb.c
Normal file
1
keyboards/1up60rgb/1up60rgb.c
Normal file
@ -0,0 +1 @@
|
||||
#include "1up60rgb.h"
|
||||
20
keyboards/1up60rgb/1up60rgb.h
Normal file
20
keyboards/1up60rgb/1up60rgb.h
Normal file
@ -0,0 +1,20 @@
|
||||
#ifndef KB_H
|
||||
#define KB_H
|
||||
|
||||
#include "quantum.h"
|
||||
|
||||
#define KEYMAP( \
|
||||
K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012, K013, K014, \
|
||||
K100, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, K113, K114, \
|
||||
K200, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212, K213, K214, \
|
||||
K300, K301, K302, K303, K304, K305, K306, K307, K308, K309, K310, K311, K313, K314, \
|
||||
K400, K401, K403, K406, K410, K411, K413, K414 \
|
||||
) { \
|
||||
{ K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012, K013, K014 }, \
|
||||
{ K100, KC_NO, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, K113, K114 }, \
|
||||
{ K200, KC_NO, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212, K213, K214 }, \
|
||||
{ K300, K301, K302, K303, K304, K305, K306, K307, K308, K309, K310, K311, KC_NO, K313, K314 }, \
|
||||
{ K400, K401, KC_NO, K403, KC_NO, KC_NO, K406, KC_NO, KC_NO, KC_NO, K410, K411, KC_NO, K413, K414 } \
|
||||
}
|
||||
|
||||
#endif
|
||||
58
keyboards/1up60rgb/config.h
Normal file
58
keyboards/1up60rgb/config.h
Normal file
@ -0,0 +1,58 @@
|
||||
#ifndef CONFIG_H
|
||||
#define CONFIG_H
|
||||
|
||||
#include "config_common.h"
|
||||
|
||||
/* USB Device descriptor parameter */
|
||||
#define VENDOR_ID 0xFEED
|
||||
#define PRODUCT_ID 0x6060
|
||||
#define DEVICE_VER 0x0001
|
||||
#define MANUFACTURER 1upkeyboards
|
||||
#define PRODUCT 1UP RGB Underglow PCB
|
||||
#define DESCRIPTION 60% keyboard with RGB underglow
|
||||
|
||||
/* key matrix size */
|
||||
#define MATRIX_ROWS 5
|
||||
#define MATRIX_COLS 15
|
||||
|
||||
/* key matrix pins */
|
||||
#define MATRIX_ROW_PINS { D0, D1, D2, D3, D5 }
|
||||
#define MATRIX_COL_PINS { F0, F1, E6, C7, C6, B7, D4, B1, B0, B5, B4, D7, D6, B3, F4 }
|
||||
#define UNUSED_PINS
|
||||
|
||||
/* COL2ROW or ROW2COL */
|
||||
#define DIODE_DIRECTION COL2ROW
|
||||
|
||||
/* number of backlight levels */
|
||||
#define BACKLIGHT_PIN B6
|
||||
#ifdef BACKLIGHT_PIN
|
||||
#define BACKLIGHT_LEVELS 5
|
||||
#endif
|
||||
|
||||
/* Set 0 if debouncing isn't needed */
|
||||
#define DEBOUNCING_DELAY 5
|
||||
|
||||
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
|
||||
#define LOCKING_SUPPORT_ENABLE
|
||||
|
||||
/* Locking resynchronize hack */
|
||||
#define LOCKING_RESYNC_ENABLE
|
||||
|
||||
/* key combination for command */
|
||||
#define IS_COMMAND() ( \
|
||||
keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
|
||||
)
|
||||
|
||||
/* prevent stuck modifiers */
|
||||
#define PREVENT_STUCK_MODIFIERS
|
||||
|
||||
#define RGB_DI_PIN E2
|
||||
#ifdef RGB_DI_PIN
|
||||
#define RGBLIGHT_ANIMATIONS
|
||||
#define RGBLED_NUM 20
|
||||
#define RGBLIGHT_HUE_STEP 8
|
||||
#define RGBLIGHT_SAT_STEP 8
|
||||
#define RGBLIGHT_VAL_STEP 8
|
||||
#endif
|
||||
|
||||
#endif
|
||||
72
keyboards/1up60rgb/keymaps/default/keymap.c
Normal file
72
keyboards/1up60rgb/keymaps/default/keymap.c
Normal file
@ -0,0 +1,72 @@
|
||||
#include "1up60rgb.h"
|
||||
|
||||
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
|
||||
|
||||
KEYMAP(
|
||||
KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_BSPC,
|
||||
KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS,
|
||||
KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, KC_ENT,
|
||||
KC_LSFT, KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_RSFT,
|
||||
KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, KC_RGUI, MO(1), KC_RCTL),
|
||||
|
||||
KEYMAP(
|
||||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
|
||||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
|
||||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
|
||||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
|
||||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS)
|
||||
|
||||
};
|
||||
|
||||
const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) {
|
||||
;
|
||||
|
||||
switch (id) {
|
||||
|
||||
}
|
||||
return MACRO_NONE;
|
||||
}
|
||||
|
||||
void matrix_init_user(void) {
|
||||
}
|
||||
|
||||
void matrix_scan_user(void) {
|
||||
}
|
||||
|
||||
bool process_record_user(uint16_t keycode, keyrecord_t *record) {
|
||||
return true;
|
||||
}
|
||||
|
||||
void led_set_user(uint8_t usb_led) {
|
||||
|
||||
if (usb_led & (1 << USB_LED_NUM_LOCK)) {
|
||||
|
||||
} else {
|
||||
|
||||
}
|
||||
|
||||
if (usb_led & (1 << USB_LED_CAPS_LOCK)) {
|
||||
DDRB |= (1 << 2); PORTB &= ~(1 << 2);
|
||||
} else {
|
||||
DDRB &= ~(1 << 2); PORTB &= ~(1 << 2);
|
||||
}
|
||||
|
||||
if (usb_led & (1 << USB_LED_SCROLL_LOCK)) {
|
||||
|
||||
} else {
|
||||
|
||||
}
|
||||
|
||||
if (usb_led & (1 << USB_LED_COMPOSE)) {
|
||||
|
||||
} else {
|
||||
|
||||
}
|
||||
|
||||
if (usb_led & (1 << USB_LED_KANA)) {
|
||||
|
||||
} else {
|
||||
|
||||
}
|
||||
|
||||
}
|
||||
72
keyboards/1up60rgb/keymaps/iso/keymap.c
Normal file
72
keyboards/1up60rgb/keymaps/iso/keymap.c
Normal file
@ -0,0 +1,72 @@
|
||||
#include "1up60rgb.h"
|
||||
|
||||
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
|
||||
|
||||
KEYMAP(
|
||||
KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_BSPC,
|
||||
KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_ENT,
|
||||
KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_NUHS, KC_ENT,
|
||||
KC_LSFT, KC_NUBS, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_RSFT,
|
||||
KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, KC_RGUI, MO(1), KC_RCTL),
|
||||
|
||||
KEYMAP(
|
||||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
|
||||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
|
||||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
|
||||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
|
||||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS)
|
||||
|
||||
};
|
||||
|
||||
const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) {
|
||||
;
|
||||
|
||||
switch (id) {
|
||||
|
||||
}
|
||||
return MACRO_NONE;
|
||||
}
|
||||
|
||||
void matrix_init_user(void) {
|
||||
}
|
||||
|
||||
void matrix_scan_user(void) {
|
||||
}
|
||||
|
||||
bool process_record_user(uint16_t keycode, keyrecord_t *record) {
|
||||
return true;
|
||||
}
|
||||
|
||||
void led_set_user(uint8_t usb_led) {
|
||||
|
||||
if (usb_led & (1 << USB_LED_NUM_LOCK)) {
|
||||
|
||||
} else {
|
||||
|
||||
}
|
||||
|
||||
if (usb_led & (1 << USB_LED_CAPS_LOCK)) {
|
||||
DDRB |= (1 << 2); PORTB &= ~(1 << 2);
|
||||
} else {
|
||||
DDRB &= ~(1 << 2); PORTB &= ~(1 << 2);
|
||||
}
|
||||
|
||||
if (usb_led & (1 << USB_LED_SCROLL_LOCK)) {
|
||||
|
||||
} else {
|
||||
|
||||
}
|
||||
|
||||
if (usb_led & (1 << USB_LED_COMPOSE)) {
|
||||
|
||||
} else {
|
||||
|
||||
}
|
||||
|
||||
if (usb_led & (1 << USB_LED_KANA)) {
|
||||
|
||||
} else {
|
||||
|
||||
}
|
||||
|
||||
}
|
||||
72
keyboards/1up60rgb/keymaps/tsangan/keymap.c
Normal file
72
keyboards/1up60rgb/keymaps/tsangan/keymap.c
Normal file
@ -0,0 +1,72 @@
|
||||
#include "1up60rgb.h"
|
||||
|
||||
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
|
||||
|
||||
KEYMAP(
|
||||
KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSLS, KC_GRV,
|
||||
KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSPC,
|
||||
KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, KC_ENT,
|
||||
KC_LSFT, KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, MO(1),
|
||||
KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_NO, KC_RALT, KC_RGUI, KC_RCTL),
|
||||
|
||||
KEYMAP(
|
||||
RESET, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_TRNS, KC_DEL,
|
||||
KC_TRNS, BL_TOGG, BL_DEC, BL_INC, BL_STEP, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_PSCR, KC_UP, KC_TRNS, KC_TRNS,
|
||||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_LEFT, KC_RGHT, KC_TRNS, KC_TRNS,
|
||||
KC_TRNS, KC_TRNS, RGB_TOG, RGB_MOD, RGB_HUI, RGB_HUD, RGB_SAI, RGB_SAD, RGB_VAI, RGB_VAD, KC_TRNS, KC_DOWN, KC_TRNS, KC_TRNS,
|
||||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS)
|
||||
|
||||
};
|
||||
|
||||
const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) {
|
||||
;
|
||||
|
||||
switch (id) {
|
||||
|
||||
}
|
||||
return MACRO_NONE;
|
||||
}
|
||||
|
||||
void matrix_init_user(void) {
|
||||
}
|
||||
|
||||
void matrix_scan_user(void) {
|
||||
}
|
||||
|
||||
bool process_record_user(uint16_t keycode, keyrecord_t *record) {
|
||||
return true;
|
||||
}
|
||||
|
||||
void led_set_user(uint8_t usb_led) {
|
||||
|
||||
if (usb_led & (1 << USB_LED_NUM_LOCK)) {
|
||||
|
||||
} else {
|
||||
|
||||
}
|
||||
|
||||
if (usb_led & (1 << USB_LED_CAPS_LOCK)) {
|
||||
DDRB |= (1 << 2); PORTB &= ~(1 << 2);
|
||||
} else {
|
||||
DDRB &= ~(1 << 2); PORTB &= ~(1 << 2);
|
||||
}
|
||||
|
||||
if (usb_led & (1 << USB_LED_SCROLL_LOCK)) {
|
||||
|
||||
} else {
|
||||
|
||||
}
|
||||
|
||||
if (usb_led & (1 << USB_LED_COMPOSE)) {
|
||||
|
||||
} else {
|
||||
|
||||
}
|
||||
|
||||
if (usb_led & (1 << USB_LED_KANA)) {
|
||||
|
||||
} else {
|
||||
|
||||
}
|
||||
|
||||
}
|
||||
13
keyboards/1up60rgb/readme.md
Normal file
13
keyboards/1up60rgb/readme.md
Normal file
@ -0,0 +1,13 @@
|
||||
# 1upkeyboards 60% RGB
|
||||
|
||||
Firmware for custom keyboard PCB with 60% key layout.
|
||||
|
||||
Keyboard Maintainer: [rempired](https://github.com/rempired)
|
||||
Hardware Supported: 1upkeyboards 60% RGB
|
||||
Hardware Availability: [1upkeyboards](https://1upkeyboards.com/rgb-underglow-1up-pcb.html)
|
||||
|
||||
Make example for this keyboard (after setting up your build environment):
|
||||
|
||||
make 1up60rgb:default
|
||||
|
||||
See [build environment setup](https://docs.qmk.fm/build_environment_setup.html) then the [make instructions](https://docs.qmk.fm/make_instructions.html) for more information.
|
||||
56
keyboards/1up60rgb/rules.mk
Normal file
56
keyboards/1up60rgb/rules.mk
Normal file
@ -0,0 +1,56 @@
|
||||
# MCU name
|
||||
MCU = atmega32u4
|
||||
|
||||
# Processor frequency.
|
||||
# This will define a symbol, F_CPU, in all source code files equal to the
|
||||
# processor frequency in Hz. You can then use this symbol in your source code to
|
||||
# calculate timings. Do NOT tack on a 'UL' at the end, this will be done
|
||||
# automatically to create a 32-bit value in your source code.
|
||||
#
|
||||
# This will be an integer division of F_USB below, as it is sourced by
|
||||
# F_USB after it has run through any CPU prescalers. Note that this value
|
||||
# does not *change* the processor frequency - it should merely be updated to
|
||||
# reflect the processor speed set externally so that the code can use accurate
|
||||
# software delays.
|
||||
F_CPU = 16000000
|
||||
|
||||
#
|
||||
# LUFA specific
|
||||
#
|
||||
# Target architecture (see library "Board Types" documentation).
|
||||
ARCH = AVR8
|
||||
|
||||
# Input clock frequency.
|
||||
# This will define a symbol, F_USB, in all source code files equal to the
|
||||
# input clock frequency (before any prescaling is performed) in Hz. This value may
|
||||
# differ from F_CPU if prescaling is used on the latter, and is required as the
|
||||
# raw input clock is fed directly to the PLL sections of the AVR for high speed
|
||||
# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
|
||||
# at the end, this will be done automatically to create a 32-bit value in your
|
||||
# source code.
|
||||
#
|
||||
# If no clock division is performed on the input clock inside the AVR (via the
|
||||
# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
|
||||
F_USB = $(F_CPU)
|
||||
|
||||
# Interrupt driven control endpoint task(+60)
|
||||
OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
|
||||
|
||||
|
||||
# Boot Section Size in *bytes*
|
||||
OPT_DEFS += -DBOOTLOADER_SIZE=4096
|
||||
|
||||
|
||||
# Build Options
|
||||
# comment out to disable the options.
|
||||
#
|
||||
BOOTMAGIC_ENABLE ?= yes # Virtual DIP switch configuration(+1000)
|
||||
MOUSEKEY_ENABLE ?= yes # Mouse keys(+4700)
|
||||
EXTRAKEY_ENABLE ?= yes # Audio control and System control(+450)
|
||||
CONSOLE_ENABLE ?= no # Console for debug(+400)
|
||||
COMMAND_ENABLE ?= no # Commands for debug and configuration
|
||||
SLEEP_LED_ENABLE ?= no # Breathing sleep LED during USB suspend
|
||||
NKRO_ENABLE ?= yes # USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
|
||||
BACKLIGHT_ENABLE ?= yes # Enable keyboard backlight functionality
|
||||
AUDIO_ENABLE ?= no
|
||||
RGBLIGHT_ENABLE ?= yes
|
||||
31
keyboards/chimera_ergo/chimera_ergo.c
Normal file
31
keyboards/chimera_ergo/chimera_ergo.c
Normal file
@ -0,0 +1,31 @@
|
||||
#include "chimera_ergo.h"
|
||||
|
||||
void uart_init(void) {
|
||||
SERIAL_UART_INIT();
|
||||
}
|
||||
|
||||
void led_init(void) {
|
||||
DDRD |= (1<<1);
|
||||
PORTD |= (1<<1);
|
||||
DDRF |= (1<<4) | (1<<5);
|
||||
PORTF |= (1<<4) | (1<<5);
|
||||
}
|
||||
|
||||
|
||||
void matrix_init_kb(void) {
|
||||
// put your keyboard start-up code here
|
||||
// runs once when the firmware starts up
|
||||
matrix_init_user();
|
||||
uart_init();
|
||||
led_init();
|
||||
}
|
||||
|
||||
void matrix_scan_kb(void) {
|
||||
// put your looping keyboard code here
|
||||
// runs every cycle (a lot)
|
||||
matrix_scan_user();
|
||||
}
|
||||
|
||||
void led_set_kb(uint8_t usb_led) {
|
||||
|
||||
}
|
||||
82
keyboards/chimera_ergo/chimera_ergo.h
Normal file
82
keyboards/chimera_ergo/chimera_ergo.h
Normal file
@ -0,0 +1,82 @@
|
||||
#ifndef CHIMERA_ERGO_H
|
||||
#define CHIMERA_ERGO_H
|
||||
|
||||
#include "quantum.h"
|
||||
#include "matrix.h"
|
||||
#include "backlight.h"
|
||||
#include <stddef.h>
|
||||
|
||||
#define red_led_off PORTF |= (1<<5)
|
||||
#define red_led_on PORTF &= ~(1<<5)
|
||||
#define blu_led_off PORTF |= (1<<4)
|
||||
#define blu_led_on PORTF &= ~(1<<4)
|
||||
#define grn_led_off PORTD |= (1<<1)
|
||||
#define grn_led_on PORTD &= ~(1<<1)
|
||||
|
||||
#define set_led_off red_led_off; grn_led_off; blu_led_off
|
||||
#define set_led_red red_led_on; grn_led_off; blu_led_off
|
||||
#define set_led_blue red_led_off; grn_led_off; blu_led_on
|
||||
#define set_led_green red_led_off; grn_led_on; blu_led_off
|
||||
#define set_led_yellow red_led_on; grn_led_on; blu_led_off
|
||||
#define set_led_magenta red_led_on; grn_led_off; blu_led_on
|
||||
#define set_led_cyan red_led_off; grn_led_on; blu_led_on
|
||||
#define set_led_white red_led_on; grn_led_on; blu_led_on
|
||||
|
||||
/*
|
||||
#define LED_B 5
|
||||
#define LED_R 6
|
||||
#define LED_G 7
|
||||
|
||||
#define all_leds_off PORTF &= ~(1<<LED_B) & ~(1<<LED_R) & ~(1<<LED_G)
|
||||
|
||||
#define red_led_on PORTF |= (1<<LED_R)
|
||||
#define red_led_off PORTF &= ~(1<<LED_R)
|
||||
#define grn_led_on PORTF |= (1<<LED_G)
|
||||
#define grn_led_off PORTF &= ~(1<<LED_G)
|
||||
#define blu_led_on PORTF |= (1<<LED_B)
|
||||
#define blu_led_off PORTF &= ~(1<<LED_B)
|
||||
|
||||
#define set_led_off PORTF &= ~(1<<LED_B) & ~(1<<LED_R) & ~(1<<LED_G)
|
||||
#define set_led_red PORTF = PORTF & ~(1<<LED_B) & ~(1<<LED_G) | (1<<LED_R)
|
||||
#define set_led_blue PORTF = PORTF & ~(1<<LED_G) & ~(1<<LED_R) | (1<<LED_B)
|
||||
#define set_led_green PORTF = PORTF & ~(1<<LED_B) & ~(1<<LED_R) | (1<<LED_G)
|
||||
#define set_led_yellow PORTF = PORTF & ~(1<<LED_B) | (1<<LED_R) | (1<<LED_G)
|
||||
#define set_led_magenta PORTF = PORTF & ~(1<<LED_G) | (1<<LED_R) | (1<<LED_B)
|
||||
#define set_led_cyan PORTF = PORTF & ~(1<<LED_R) | (1<<LED_B) | (1<<LED_G)
|
||||
#define set_led_white PORTF |= (1<<LED_B) | (1<<LED_R) | (1<<LED_G)
|
||||
*/
|
||||
|
||||
// This a shortcut to help you visually see your layout.
|
||||
// The first section contains all of the arguements
|
||||
// The second converts the arguments into a two-dimensional array
|
||||
#define KC_KEYMAP( \
|
||||
k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k10, k11, \
|
||||
k12, k13, k14, k15, k16, k17, k18, k19, k20, k21, k22, k23, \
|
||||
k24, k25, k26, k27, k28, k29, k30, k31, k32, k33, k34, k35, \
|
||||
k36, k37, k38, k39, k40, k41, k42, k43, k44, k45, k46, k47, \
|
||||
k48, k49, k50, k51 \
|
||||
) \
|
||||
{ \
|
||||
{ KC_NO, KC_NO, KC_##k26, KC_##k15, KC_##k28, KC_##k01, KC_##k42, KC_##k31, KC_##k20, KC_##k33, KC_NO, KC_NO }, \
|
||||
{ KC_##k00, KC_NO, KC_##k14, KC_##k27, KC_##k16, KC_##k36, KC_##k47, KC_##k19, KC_##k32, KC_##k21, KC_NO, KC_##k11 }, \
|
||||
{ KC_##k12, KC_##k25, KC_##k02, KC_##k39, KC_##k17, KC_##k49, KC_##k50, KC_##k18, KC_##k44, KC_##k09, KC_##k34, KC_##k23 }, \
|
||||
{ KC_##k24, KC_##k13, KC_##k38, KC_##k04, KC_##k05, KC_##k48, KC_##k51, KC_##k06, KC_##k07, KC_##k45, KC_##k22, KC_##k35 }, \
|
||||
{ KC_##k29, KC_##k41, KC_##k03, KC_##k40, KC_##k37, KC_NO, KC_##k30, KC_##k43, KC_##k08, KC_##k10, KC_##k46, KC_NO }, \
|
||||
}
|
||||
|
||||
#define KEYMAP( \
|
||||
k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k10, k11, \
|
||||
k12, k13, k14, k15, k16, k17, k18, k19, k20, k21, k22, k23, \
|
||||
k24, k25, k26, k27, k28, k29, k30, k31, k32, k33, k34, k35, \
|
||||
k36, k37, k38, k39, k40, k41, k42, k43, k44, k45, k46, k47, \
|
||||
k48, k49, k50, k51 \
|
||||
) \
|
||||
{ \
|
||||
{ KC_NO, KC_NO, k26, k15, k28, k01, k42, k31, k20, k33, KC_NO, KC_NO }, \
|
||||
{ k00, KC_NO, k14, k27, k16, k36, k47, k19, k32, k21, KC_NO, k11 }, \
|
||||
{ k12, k25, k02, k39, k17, k49, k50, k18, k44, k09, k34, k23 }, \
|
||||
{ k24, k13, k38, k04, k05, k48, k51, k06, k07, k45, k22, k35 }, \
|
||||
{ k29, k41, k03, k40, k37, KC_NO, k30, k43, k08, k10, k46, KC_NO }, \
|
||||
}
|
||||
|
||||
#endif
|
||||
87
keyboards/chimera_ergo/config.h
Normal file
87
keyboards/chimera_ergo/config.h
Normal file
@ -0,0 +1,87 @@
|
||||
/*
|
||||
Copyright 2012 Jun Wako <wakojun@gmail.com>
|
||||
|
||||
This program is free software: you can redistribute it and/or modify
|
||||
it under the terms of the GNU General Public License as published by
|
||||
the Free Software Foundation, either version 2 of the License, or
|
||||
(at your option) any later version.
|
||||
|
||||
This program is distributed in the hope that it will be useful,
|
||||
but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
GNU General Public License for more details.
|
||||
|
||||
You should have received a copy of the GNU General Public License
|
||||
along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
*/
|
||||
|
||||
#ifndef CONFIG_H
|
||||
#define CONFIG_H
|
||||
|
||||
#include "config_common.h"
|
||||
|
||||
/* USB Device descriptor parameter */
|
||||
|
||||
#define VENDOR_ID 0xFEED
|
||||
#define PRODUCT_ID 0x6060
|
||||
#define DEVICE_VER 0x0001
|
||||
#define MANUFACTURER unknown
|
||||
#define PRODUCT Chimera Ergo
|
||||
#define DESCRIPTION q.m.k. keyboard firmware for Chimera Ergo
|
||||
|
||||
/* key matrix size */
|
||||
#define MATRIX_ROWS 6
|
||||
#define MATRIX_COLS 12
|
||||
|
||||
/* define if matrix has ghost */
|
||||
//#define MATRIX_HAS_GHOST
|
||||
|
||||
/* number of backlight levels */
|
||||
//#define BACKLIGHT_LEVELS 3
|
||||
|
||||
#define ONESHOT_TIMEOUT 500
|
||||
|
||||
|
||||
/* key combination for command */
|
||||
#define IS_COMMAND() ( \
|
||||
keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
|
||||
)
|
||||
|
||||
/*
|
||||
* Feature disable options
|
||||
* These options are also useful to firmware size reduction.
|
||||
*/
|
||||
|
||||
#define PREVENT_STUCK_MODIFIERS
|
||||
|
||||
/* disable debug print */
|
||||
//#define NO_DEBUG
|
||||
|
||||
/* disable print */
|
||||
//#define NO_PRINT
|
||||
|
||||
/* disable action features */
|
||||
//#define NO_ACTION_LAYER
|
||||
//#define NO_ACTION_TAPPING
|
||||
//#define NO_ACTION_ONESHOT
|
||||
//#define NO_ACTION_MACRO
|
||||
//#define NO_ACTION_FUNCTION
|
||||
|
||||
//UART settings for communication with the RF microcontroller
|
||||
#define SERIAL_UART_BAUD 1000000
|
||||
#define SERIAL_UART_DATA UDR1
|
||||
#define SERIAL_UART_UBRR (F_CPU / (16UL * SERIAL_UART_BAUD) - 1)
|
||||
#define SERIAL_UART_TXD_READY (UCSR1A & _BV(UDRE1))
|
||||
#define SERIAL_UART_RXD_PRESENT (UCSR1A & _BV(RXC1))
|
||||
#define SERIAL_UART_INIT() do { \
|
||||
/* baud rate */ \
|
||||
UBRR1L = SERIAL_UART_UBRR; \
|
||||
/* baud rate */ \
|
||||
UBRR1H = SERIAL_UART_UBRR >> 8; \
|
||||
/* enable TX and RX */ \
|
||||
UCSR1B = _BV(TXEN1) | _BV(RXEN1); \
|
||||
/* 8-bit data */ \
|
||||
UCSR1C = _BV(UCSZ11) | _BV(UCSZ10); \
|
||||
} while(0)
|
||||
|
||||
#endif
|
||||
206
keyboards/chimera_ergo/keymaps/default/keymap.c
Normal file
206
keyboards/chimera_ergo/keymaps/default/keymap.c
Normal file
@ -0,0 +1,206 @@
|
||||
// this is the style you want to emulate.
|
||||
// This is the canonical layout file for the Quantum project. If you want to add another keyboard,
|
||||
|
||||
#include "chimera_ergo.h"
|
||||
|
||||
// Each layer gets a name for readability, which is then used in the keymap matrix below.
|
||||
// The underscores don't mean anything - you can have a layer called STUFF or any other name.
|
||||
// Layer names don't all need to be of the same length, obviously, and you can also skip them
|
||||
// entirely and just use numbers.
|
||||
enum chimera_ergo_layers
|
||||
{
|
||||
_QWERTY,
|
||||
_CAPS,
|
||||
_NUMPAD,
|
||||
_SYMBOLS,
|
||||
_MACROS,
|
||||
_NAV
|
||||
};
|
||||
|
||||
#define KC_NMPD TG(_NUMPAD)
|
||||
#define KC_SYMB TG(_SYMBOLS)
|
||||
#define KC_SPFN LT(_NAV,KC_EQL)
|
||||
#define KC_SCTL MT(MOD_LCTL, KC_LBRC)
|
||||
#define KC_SCTR MT(MOD_LCTL, KC_RBRC)
|
||||
#define KC_SPLT MT(MOD_LALT, KC_MINS)
|
||||
#define KC_SPRT MT(MOD_LALT, KC_1)
|
||||
#define KC_GBRC MT(MOD_RGUI, KC_RBRC)
|
||||
#define KC_GQOT MT(MOD_LGUI, KC_QUOT)
|
||||
#define KC_MESC LT(_MACROS, KC_ESC)
|
||||
#define KC_INCL M(0)
|
||||
#define KC_PULL M(1)
|
||||
#define KC_PUSH M(2)
|
||||
#define KC_SCAP M(3)
|
||||
#define KC_SCOF M(4)
|
||||
#define KC_CAD LALT(LCTL(KC_DEL))
|
||||
|
||||
#define LONGPRESS_DELAY 150
|
||||
//#define LAYER_TOGGLE_DELAY 300
|
||||
|
||||
// Fillers to make layering more clear
|
||||
#define _______ KC_TRNS
|
||||
#define XXXXXXX KC_NO
|
||||
#define KC_ KC_TRNS
|
||||
|
||||
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
|
||||
|
||||
[_QWERTY] = KC_KEYMAP(
|
||||
//,----+----+----+----+----+----. ,----+----+----+----+----+----.
|
||||
LBRC, 1 ,SCTL,SPLT,SPFN, 5 , 6 ,GBRC,SPRT,SCTR, 0 ,RBRC,
|
||||
//|----+----+----+----+----+----| |----+----+----+----+----+----|
|
||||
MESC, Q , W , E , R , T , Y , U , I , O , P ,QUOT,
|
||||
//|----+----+----+----+----+----| |----+----+----+----+----+----|
|
||||
TAB , A , S , D , F , G , H , J , K , L ,SCLN,ENT ,
|
||||
//|----+----+----+----+----+----| |----+----+----+----+----+----|
|
||||
LSPO, Z , X , C , V , B , N , M ,COMM,DOT ,SLSH,RSPC,
|
||||
//|----+----+----+----+----+----| |----+----+----+----+----+----|
|
||||
NMPD,BSPC, SPC ,SYMB
|
||||
// \------------------+----+----/ \---+----+----+--------------/
|
||||
),
|
||||
|
||||
[_CAPS] = KC_KEYMAP(
|
||||
//,----+----+----+----+----+----. ,----+----+----+----+----+----.
|
||||
,UNDS, , , , , , , , , , ,
|
||||
//|----+----+----+----+----+----| |----+----+----+----+----+----|
|
||||
, , , , , , , , , , , ,
|
||||
//|----+----+----+----+----+----| |----+----+----+----+----+----|
|
||||
, , , , , , , , , ,COLN, ,
|
||||
//|----+----+----+----+----+----| |----+----+----+----+----+----|
|
||||
SCOF, , , , , , , , , , ,SCOF,
|
||||
//|----+----+----+----+----+----| |----+----+----+----+----+----|
|
||||
, , ,
|
||||
// \------------------+----+----/ \---+----+----+--------------/
|
||||
),
|
||||
|
||||
[_NUMPAD] = KC_KEYMAP(
|
||||
//,----+----+----+----+----+----. ,----+----+----+----+----+----.
|
||||
, , , , , , , , , ,MINS, ,
|
||||
//|----+----+----+----+----+----| |----+----+----+----+----+----|
|
||||
, ,COLN, , , , , 7 , 8 , 9 ,ASTR, ,
|
||||
//|----+----+----+----+----+----| |----+----+----+----+----+----|
|
||||
, ,DOT , , , , , 4 , 5 , 6 ,PLUS, ,
|
||||
//|----+----+----+----+----+----| |----+----+----+----+----+----|
|
||||
, , , , , , , 1 , 2 , 3 ,SLSH, ,
|
||||
//|----+----+----+----+----+----| |----+----+----+----+----+----|
|
||||
, , , 0
|
||||
// \------------------+----+----/ \---+----+----+--------------/
|
||||
),
|
||||
|
||||
[_SYMBOLS] = KC_KEYMAP(
|
||||
//,----+----+----+----+----+----. ,----+----+----+----+----+----.
|
||||
, , , , , , , , , , , ,
|
||||
//|----+----+----+----+----+----| |----+----+----+----+----+----|
|
||||
,EXLM, AT ,HASH,DLR ,PERC, CIRC,AMPR,ASTR,LPRN,RPRN,BSLS,
|
||||
//|----+----+----+----+----+----| |----+----+----+----+----+----|
|
||||
F1 , F2 , F3 , F4 , F5 , F6 , TILD,EQL ,UNDS,LCBR,RCBR, ,
|
||||
//|----+----+----+----+----+----| |----+----+----+----+----+----|
|
||||
F7 , F8 , F9 ,F10 ,F11 ,F12 , GRV ,PLUS,MINS,LBRC,RBRC, ,
|
||||
//|----+----+----+----+----+----| |----+----+----+----+----+----|
|
||||
PIPE, , ,
|
||||
// \------------------+----+----/ \---+----+----+--------------/
|
||||
),
|
||||
|
||||
[_MACROS] = KC_KEYMAP(
|
||||
//,----+----+----+----+----+----. ,----+----+----+----+----+----.
|
||||
, , , , , , , , , , , ,
|
||||
//|----+----+----+----+----+----| |----+----+----+----+----+----|
|
||||
, , , , , , , ,INCL, , , ,
|
||||
//|----+----+----+----+----+----| |----+----+----+----+----+----|
|
||||
, , ,CAD , , , , , , , , ,
|
||||
//|----+----+----+----+----+----| |----+----+----+----+----+----|
|
||||
SCAP, , , , , , , ,PULL,PUSH, , ,
|
||||
//|----+----+----+----+----+----| |----+----+----+----+----+----|
|
||||
, , ,
|
||||
// \------------------+----+----/ \---+----+----+--------------/
|
||||
),
|
||||
|
||||
[_NAV] = KC_KEYMAP(
|
||||
//,----+----+----+----+----+----. ,----+----+----+----+----+----.
|
||||
, , , , , , , , , , , ,
|
||||
//|----+----+----+----+----+----| |----+----+----+----+----+----|
|
||||
, , , , , , ,PGUP, UP ,PGDN,PSCR, ,
|
||||
//|----+----+----+----+----+----| |----+----+----+----+----+----|
|
||||
, , , , , , ,LEFT,DOWN,RGHT, , ,
|
||||
//|----+----+----+----+----+----| |----+----+----+----+----+----|
|
||||
, , , , , , , , , , , ,
|
||||
//|----+----+----+----+----+----| |----+----+----+----+----+----|
|
||||
,DEL , ,
|
||||
// \------------------+----+----/ \---+----+----+--------------/
|
||||
),
|
||||
|
||||
|
||||
};
|
||||
|
||||
|
||||
const uint16_t PROGMEM fn_actions[] = {
|
||||
|
||||
};
|
||||
|
||||
const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt)
|
||||
{
|
||||
switch(id) {
|
||||
/* include some kind of library or header */
|
||||
case 0:
|
||||
if (record->event.pressed) {
|
||||
SEND_STRING("#include <>");
|
||||
return MACRO( T(LEFT), END);
|
||||
}
|
||||
break;
|
||||
case 1:
|
||||
if (record->event.pressed) {
|
||||
SEND_STRING("git pull");
|
||||
return MACRO( T(ENT), END );
|
||||
}
|
||||
break;
|
||||
case 2:
|
||||
if (record->event.pressed){
|
||||
SEND_STRING("git push");
|
||||
return MACRO( T(ENT), END );
|
||||
}
|
||||
break;
|
||||
case 3:
|
||||
if (record->event.pressed){
|
||||
layer_on(_CAPS);
|
||||
register_code(KC_CAPSLOCK);
|
||||
unregister_code(KC_CAPSLOCK);
|
||||
}
|
||||
break;
|
||||
case 4:
|
||||
if (record->event.pressed){
|
||||
layer_off(_CAPS);
|
||||
register_code(KC_CAPSLOCK);
|
||||
unregister_code(KC_CAPSLOCK);
|
||||
}
|
||||
break;
|
||||
}
|
||||
return MACRO_NONE;
|
||||
};
|
||||
|
||||
|
||||
void matrix_scan_user(void) {
|
||||
uint8_t layer = biton32(layer_state);
|
||||
|
||||
switch (layer) {
|
||||
case _QWERTY:
|
||||
set_led_green;
|
||||
break;
|
||||
case _CAPS:
|
||||
set_led_white;
|
||||
break;
|
||||
case _NUMPAD:
|
||||
set_led_blue;
|
||||
break;
|
||||
case _SYMBOLS:
|
||||
set_led_red;
|
||||
break;
|
||||
case _NAV:
|
||||
set_led_magenta;
|
||||
break;
|
||||
case _MACROS:
|
||||
set_led_cyan;
|
||||
break;
|
||||
default:
|
||||
set_led_green;
|
||||
break;
|
||||
}
|
||||
};
|
||||
164
keyboards/chimera_ergo/matrix.c
Normal file
164
keyboards/chimera_ergo/matrix.c
Normal file
@ -0,0 +1,164 @@
|
||||
/*
|
||||
Copyright 2012 Jun Wako
|
||||
Copyright 2014 Jack Humbert
|
||||
|
||||
This program is free software: you can redistribute it and/or modify
|
||||
it under the terms of the GNU General Public License as published by
|
||||
the Free Software Foundation, either version 2 of the License, or
|
||||
(at your option) any later version.
|
||||
|
||||
This program is distributed in the hope that it will be useful,
|
||||
but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
GNU General Public License for more details.
|
||||
|
||||
You should have received a copy of the GNU General Public License
|
||||
along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
*/
|
||||
#include <stdint.h>
|
||||
#include <stdbool.h>
|
||||
#if defined(__AVR__)
|
||||
#include <avr/io.h>
|
||||
#endif
|
||||
#include "wait.h"
|
||||
#include "print.h"
|
||||
#include "debug.h"
|
||||
#include "util.h"
|
||||
#include "matrix.h"
|
||||
#include "timer.h"
|
||||
|
||||
#if (MATRIX_COLS <= 8)
|
||||
# define print_matrix_header() print("\nr/c 01234567\n")
|
||||
# define print_matrix_row(row) print_bin_reverse8(matrix_get_row(row))
|
||||
# define matrix_bitpop(i) bitpop(matrix[i])
|
||||
# define ROW_SHIFTER ((uint8_t)1)
|
||||
#elif (MATRIX_COLS <= 16)
|
||||
# define print_matrix_header() print("\nr/c 0123456789ABCDEF\n")
|
||||
# define print_matrix_row(row) print_bin_reverse16(matrix_get_row(row))
|
||||
# define matrix_bitpop(i) bitpop16(matrix[i])
|
||||
# define ROW_SHIFTER ((uint16_t)1)
|
||||
#elif (MATRIX_COLS <= 32)
|
||||
# define print_matrix_header() print("\nr/c 0123456789ABCDEF0123456789ABCDEF\n")
|
||||
# define print_matrix_row(row) print_bin_reverse32(matrix_get_row(row))
|
||||
# define matrix_bitpop(i) bitpop32(matrix[i])
|
||||
# define ROW_SHIFTER ((uint32_t)1)
|
||||
#endif
|
||||
|
||||
/* matrix state(1:on, 0:off) */
|
||||
static matrix_row_t matrix[MATRIX_ROWS];
|
||||
|
||||
__attribute__ ((weak))
|
||||
void matrix_init_quantum(void) {
|
||||
matrix_init_kb();
|
||||
}
|
||||
|
||||
__attribute__ ((weak))
|
||||
void matrix_scan_quantum(void) {
|
||||
matrix_scan_kb();
|
||||
}
|
||||
|
||||
__attribute__ ((weak))
|
||||
void matrix_init_kb(void) {
|
||||
matrix_init_user();
|
||||
}
|
||||
|
||||
__attribute__ ((weak))
|
||||
void matrix_scan_kb(void) {
|
||||
matrix_scan_user();
|
||||
}
|
||||
|
||||
__attribute__ ((weak))
|
||||
void matrix_init_user(void) {
|
||||
}
|
||||
|
||||
__attribute__ ((weak))
|
||||
void matrix_scan_user(void) {
|
||||
}
|
||||
|
||||
inline
|
||||
uint8_t matrix_rows(void) {
|
||||
return MATRIX_ROWS;
|
||||
}
|
||||
|
||||
inline
|
||||
uint8_t matrix_cols(void) {
|
||||
return MATRIX_COLS;
|
||||
}
|
||||
|
||||
void matrix_init(void) {
|
||||
|
||||
matrix_init_quantum();
|
||||
}
|
||||
|
||||
uint8_t matrix_scan(void)
|
||||
{
|
||||
SERIAL_UART_INIT();
|
||||
|
||||
uint32_t timeout = 0;
|
||||
|
||||
//the s character requests the RF slave to send the matrix
|
||||
SERIAL_UART_DATA = 's';
|
||||
|
||||
//trust the external keystates entirely, erase the last data
|
||||
uint8_t uart_data[14] = {0};
|
||||
|
||||
//there are 10 bytes corresponding to 10 columns, and an end byte
|
||||
for (uint8_t i = 0; i < 14; i++) {
|
||||
//wait for the serial data, timeout if it's been too long
|
||||
//this only happened in testing with a loose wire, but does no
|
||||
//harm to leave it in here
|
||||
while(!SERIAL_UART_RXD_PRESENT){
|
||||
timeout++;
|
||||
if (timeout > 10000){
|
||||
break;
|
||||
}
|
||||
}
|
||||
uart_data[i] = SERIAL_UART_DATA;
|
||||
}
|
||||
|
||||
//check for the end packet, the key state bytes use the LSBs, so 0xE0
|
||||
//will only show up here if the correct bytes were recieved
|
||||
if (uart_data[10] == 0xE0)
|
||||
{
|
||||
//shifting and transferring the keystates to the QMK matrix variable
|
||||
for (uint8_t i = 0; i < MATRIX_ROWS; i++) {
|
||||
matrix[i] = (uint16_t) uart_data[i*2] | (uint16_t) uart_data[i*2+1] << 6;
|
||||
}
|
||||
}
|
||||
|
||||
|
||||
matrix_scan_quantum();
|
||||
return 1;
|
||||
}
|
||||
|
||||
inline
|
||||
bool matrix_is_on(uint8_t row, uint8_t col)
|
||||
{
|
||||
return (matrix[row] & ((matrix_row_t)1<col));
|
||||
}
|
||||
|
||||
inline
|
||||
matrix_row_t matrix_get_row(uint8_t row)
|
||||
{
|
||||
return matrix[row];
|
||||
}
|
||||
|
||||
void matrix_print(void)
|
||||
{
|
||||
print_matrix_header();
|
||||
|
||||
for (uint8_t row = 0; row < MATRIX_ROWS; row++) {
|
||||
phex(row); print(": ");
|
||||
print_matrix_row(row);
|
||||
print("\n");
|
||||
}
|
||||
}
|
||||
|
||||
uint8_t matrix_key_count(void)
|
||||
{
|
||||
uint8_t count = 0;
|
||||
for (uint8_t i = 0; i < MATRIX_ROWS; i++) {
|
||||
count += matrix_bitpop(i);
|
||||
}
|
||||
return count;
|
||||
}
|
||||
19
keyboards/chimera_ergo/readme.md
Normal file
19
keyboards/chimera_ergo/readme.md
Normal file
@ -0,0 +1,19 @@
|
||||
# Chimera Ergo
|
||||
|
||||
|
||||
|
||||
A split wireless 40% ergonomic keyboard
|
||||
|
||||
Keyboard Maintainer: [William Wilson](https://github.com/GlenPickle)
|
||||
|
||||
|
||||
Hardware Supported: Chimera Ergo PCB, WaveShare core nRF51822
|
||||
|
||||
Hardware Availability: [Gerbers](https://github.com/GlenPickle/Chimera/tree/master/ergo/gerbers)
|
||||
|
||||
Make example for this keyboard (after setting up your build environment):
|
||||
|
||||
make chimera_ergo:default
|
||||
|
||||
See [build environment setup](https://docs.qmk.fm/build_environment_setup.html) then the [make instructions](https://docs.qmk.fm/make_instructions.html) for more information.
|
||||
|
||||
82
keyboards/chimera_ergo/rules.mk
Normal file
82
keyboards/chimera_ergo/rules.mk
Normal file
@ -0,0 +1,82 @@
|
||||
|
||||
OPT_DEFS += -DCHIMERA_ERGO_PROMICRO
|
||||
CHIMERA_ERGO_UPLOAD_COMMAND = while [ ! -r $(USB) ]; do sleep 1; done; \
|
||||
avrdude -p $(MCU) -c avr109 -U flash:w:$(TARGET).hex -P $(USB)
|
||||
|
||||
# # project specific files
|
||||
SRC = matrix.c
|
||||
|
||||
|
||||
# MCU name
|
||||
#MCU = at90usb1287
|
||||
MCU = atmega32u4
|
||||
|
||||
# Processor frequency.
|
||||
# This will define a symbol, F_CPU, in all source code files equal to the
|
||||
# processor frequency in Hz. You can then use this symbol in your source code to
|
||||
# calculate timings. Do NOT tack on a 'UL' at the end, this will be done
|
||||
# automatically to create a 32-bit value in your source code.
|
||||
#
|
||||
# This will be an integer division of F_USB below, as it is sourced by
|
||||
# F_USB after it has run through any CPU prescalers. Note that this value
|
||||
# does not *change* the processor frequency - it should merely be updated to
|
||||
# reflect the processor speed set externally so that the code can use accurate
|
||||
# software delays.
|
||||
F_CPU = 16000000
|
||||
|
||||
|
||||
#
|
||||
# LUFA specific
|
||||
#
|
||||
# Target architecture (see library "Board Types" documentation).
|
||||
ARCH = AVR8
|
||||
|
||||
# Input clock frequency.
|
||||
# This will define a symbol, F_USB, in all source code files equal to the
|
||||
# input clock frequency (before any prescaling is performed) in Hz. This value may
|
||||
# differ from F_CPU if prescaling is used on the latter, and is required as the
|
||||
# raw input clock is fed directly to the PLL sections of the AVR for high speed
|
||||
# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
|
||||
# at the end, this will be done automatically to create a 32-bit value in your
|
||||
# source code.
|
||||
#
|
||||
# If no clock division is performed on the input clock inside the AVR (via the
|
||||
# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
|
||||
F_USB = $(F_CPU)
|
||||
|
||||
# Bootloader
|
||||
# This definition is optional, and if your keyboard supports multiple bootloaders of
|
||||
# different sizes, comment this out, and the correct address will be loaded
|
||||
# automatically (+60). See bootloader.mk for all options.
|
||||
BOOTLOADER = caterina
|
||||
|
||||
# Interrupt driven control endpoint task(+60)
|
||||
OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
|
||||
|
||||
# Boot Section Size in *bytes*
|
||||
# Teensy halfKay 512
|
||||
# Teensy++ halfKay 1024
|
||||
# Atmel DFU loader 4096
|
||||
# LUFA bootloader 4096
|
||||
# USBaspLoader 2048
|
||||
OPT_DEFS += -DBOOTLOADER_SIZE=4096
|
||||
|
||||
|
||||
# Build Options
|
||||
# comment out to disable the options.
|
||||
#
|
||||
#BOOTMAGIC_ENABLE = yes # Virtual DIP switch configuration(+1000)
|
||||
MOUSEKEY_ENABLE = yes # Mouse keys(+4700)
|
||||
EXTRAKEY_ENABLE = yes # Audio control and System control(+450)
|
||||
CONSOLE_ENABLE = yes # Console for debug(+400)
|
||||
COMMAND_ENABLE = yes # Commands for debug and configuration
|
||||
CUSTOM_MATRIX = yes # Remote matrix from the wireless bridge
|
||||
# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
|
||||
# SLEEP_LED_ENABLE = yes # Breathing sleep LED during USB suspend
|
||||
NKRO_ENABLE = yes # USB Nkey Rollover - not yet supported in LUFA
|
||||
# BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality
|
||||
# MIDI_ENABLE = YES # MIDI controls
|
||||
UNICODE_ENABLE = YES # Unicode
|
||||
# BLUETOOTH_ENABLE = yes # Enable Bluetooth with the Adafruit EZ-Key HID
|
||||
|
||||
USB = /dev/ttyACM0
|
||||
31
keyboards/chimera_ls/chimera_ls.c
Normal file
31
keyboards/chimera_ls/chimera_ls.c
Normal file
@ -0,0 +1,31 @@
|
||||
#include "chimera_ls.h"
|
||||
|
||||
void uart_init(void) {
|
||||
SERIAL_UART_INIT();
|
||||
}
|
||||
|
||||
void led_init(void) {
|
||||
DDRD |= (1<<1);
|
||||
PORTD |= (1<<1);
|
||||
DDRF |= (1<<4) | (1<<5);
|
||||
PORTF |= (1<<4) | (1<<5);
|
||||
}
|
||||
|
||||
|
||||
void matrix_init_kb(void) {
|
||||
// put your keyboard start-up code here
|
||||
// runs once when the firmware starts up
|
||||
matrix_init_user();
|
||||
uart_init();
|
||||
led_init();
|
||||
}
|
||||
|
||||
void matrix_scan_kb(void) {
|
||||
// put your looping keyboard code here
|
||||
// runs every cycle (a lot)
|
||||
matrix_scan_user();
|
||||
}
|
||||
|
||||
void led_set_kb(uint8_t usb_led) {
|
||||
|
||||
}
|
||||
82
keyboards/chimera_ls/chimera_ls.h
Normal file
82
keyboards/chimera_ls/chimera_ls.h
Normal file
@ -0,0 +1,82 @@
|
||||
#ifndef CHIMERA_LETS_SPLIT_H
|
||||
#define CHIMERA_LETS_SPLIT_H
|
||||
|
||||
#include "quantum.h"
|
||||
#include "matrix.h"
|
||||
#include "backlight.h"
|
||||
#include <stddef.h>
|
||||
|
||||
#define red_led_off PORTF |= (1<<5)
|
||||
#define red_led_on PORTF &= ~(1<<5)
|
||||
#define blu_led_off PORTF |= (1<<4)
|
||||
#define blu_led_on PORTF &= ~(1<<4)
|
||||
#define grn_led_off PORTD |= (1<<1)
|
||||
#define grn_led_on PORTD &= ~(1<<1)
|
||||
|
||||
#define set_led_off red_led_off; grn_led_off; blu_led_off
|
||||
#define set_led_red red_led_on; grn_led_off; blu_led_off
|
||||
#define set_led_blue red_led_off; grn_led_off; blu_led_on
|
||||
#define set_led_green red_led_off; grn_led_on; blu_led_off
|
||||
#define set_led_yellow red_led_on; grn_led_on; blu_led_off
|
||||
#define set_led_magenta red_led_on; grn_led_off; blu_led_on
|
||||
#define set_led_cyan red_led_off; grn_led_on; blu_led_on
|
||||
#define set_led_white red_led_on; grn_led_on; blu_led_on
|
||||
|
||||
/*
|
||||
#define LED_B 5
|
||||
#define LED_R 6
|
||||
#define LED_G 7
|
||||
|
||||
#define all_leds_off PORTF &= ~(1<<LED_B) & ~(1<<LED_R) & ~(1<<LED_G)
|
||||
|
||||
#define red_led_on PORTF |= (1<<LED_R)
|
||||
#define red_led_off PORTF &= ~(1<<LED_R)
|
||||
#define grn_led_on PORTF |= (1<<LED_G)
|
||||
#define grn_led_off PORTF &= ~(1<<LED_G)
|
||||
#define blu_led_on PORTF |= (1<<LED_B)
|
||||
#define blu_led_off PORTF &= ~(1<<LED_B)
|
||||
|
||||
#define set_led_off PORTF &= ~(1<<LED_B) & ~(1<<LED_R) & ~(1<<LED_G)
|
||||
#define set_led_red PORTF = PORTF & ~(1<<LED_B) & ~(1<<LED_G) | (1<<LED_R)
|
||||
#define set_led_blue PORTF = PORTF & ~(1<<LED_G) & ~(1<<LED_R) | (1<<LED_B)
|
||||
#define set_led_green PORTF = PORTF & ~(1<<LED_B) & ~(1<<LED_R) | (1<<LED_G)
|
||||
#define set_led_yellow PORTF = PORTF & ~(1<<LED_B) | (1<<LED_R) | (1<<LED_G)
|
||||
#define set_led_magenta PORTF = PORTF & ~(1<<LED_G) | (1<<LED_R) | (1<<LED_B)
|
||||
#define set_led_cyan PORTF = PORTF & ~(1<<LED_R) | (1<<LED_B) | (1<<LED_G)
|
||||
#define set_led_white PORTF |= (1<<LED_B) | (1<<LED_R) | (1<<LED_G)
|
||||
*/
|
||||
|
||||
// This a shortcut to help you visually see your layout.
|
||||
// The first section contains all of the arguements
|
||||
// The second converts the arguments into a two-dimensional array
|
||||
|
||||
#define KC_KEYMAP( \
|
||||
k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k10, k11, \
|
||||
k12, k13, k14, k15, k16, k17, k18, k19, k20, k21, k22, k23, \
|
||||
k24, k25, k26, k27, k28, k29, k30, k31, k32, k33, k34, k35, \
|
||||
k36, k37, k38, k39, k40, k41, k42, k43, k44, k45, k46, k47 \
|
||||
) \
|
||||
{ \
|
||||
{ KC_##k43, KC_##k45, KC_##k34, KC_##k11, KC_##k23, KC_##k40, KC_##k38, KC_##k25, KC_##k00, KC_##k12 }, \
|
||||
{ KC_##k31, KC_##k44, KC_##k46, KC_##k35, KC_##k22, KC_##k28, KC_##k39, KC_##k37, KC_##k24, KC_##k13 }, \
|
||||
{ KC_##k30, KC_##k32, KC_##k33, KC_##k47, KC_##k09, KC_##k29, KC_##k27, KC_##k26, KC_##k36, KC_##k02 }, \
|
||||
{ KC_##k19, KC_##k20, KC_##k21, KC_##k42, KC_##k18, KC_##k16, KC_##k15, KC_##k14, KC_##k41, KC_##k17 }, \
|
||||
{ KC_##k06, KC_##k07, KC_##k08, KC_##k10, KC_NO, KC_##k05, KC_##k04, KC_##k03, KC_##k01, KC_NO }, \
|
||||
}
|
||||
|
||||
#define KEYMAP( \
|
||||
k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k10, k11, \
|
||||
k12, k13, k14, k15, k16, k17, k18, k19, k20, k21, k22, k23, \
|
||||
k24, k25, k26, k27, k28, k29, k30, k31, k32, k33, k34, k35, \
|
||||
k36, k37, k38, k39, k40, k41, k42, k43, k44, k45, k46, k47 \
|
||||
) \
|
||||
{ \
|
||||
{ k43, k45, k34, k11, k23, k40, k38, k25, k00, k12 }, \
|
||||
{ k31, k44, k46, k35, k22, k28, k39, k37, k24, k13 }, \
|
||||
{ k30, k32, k33, k47, k09, k29, k27, k26, k36, k02 }, \
|
||||
{ k19, k20, k21, k42, k18, k16, k15, k14, k41, k17 }, \
|
||||
{ k06, k07, k08, k10, KC_NO, k05, k04, k03, k01, KC_NO }, \
|
||||
}
|
||||
|
||||
|
||||
#endif
|
||||
87
keyboards/chimera_ls/config.h
Normal file
87
keyboards/chimera_ls/config.h
Normal file
@ -0,0 +1,87 @@
|
||||
/*
|
||||
Copyright 2012 Jun Wako <wakojun@gmail.com>
|
||||
|
||||
This program is free software: you can redistribute it and/or modify
|
||||
it under the terms of the GNU General Public License as published by
|
||||
the Free Software Foundation, either version 2 of the License, or
|
||||
(at your option) any later version.
|
||||
|
||||
This program is distributed in the hope that it will be useful,
|
||||
but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
GNU General Public License for more details.
|
||||
|
||||
You should have received a copy of the GNU General Public License
|
||||
along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
*/
|
||||
|
||||
#ifndef CONFIG_H
|
||||
#define CONFIG_H
|
||||
|
||||
#include "config_common.h"
|
||||
|
||||
/* USB Device descriptor parameter */
|
||||
|
||||
#define VENDOR_ID 0xFEED
|
||||
#define PRODUCT_ID 0x6060
|
||||
#define DEVICE_VER 0x0001
|
||||
#define MANUFACTURER unknown
|
||||
#define PRODUCT Chimera Lets Split
|
||||
#define DESCRIPTION q.m.k. keyboard firmware for Chimera Lets Split
|
||||
|
||||
/* key matrix size */
|
||||
#define MATRIX_ROWS 5
|
||||
#define MATRIX_COLS 12
|
||||
|
||||
/* define if matrix has ghost */
|
||||
//#define MATRIX_HAS_GHOST
|
||||
|
||||
/* number of backlight levels */
|
||||
//#define BACKLIGHT_LEVELS 3
|
||||
|
||||
#define ONESHOT_TIMEOUT 500
|
||||
|
||||
|
||||
/* key combination for command */
|
||||
#define IS_COMMAND() ( \
|
||||
keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
|
||||
)
|
||||
|
||||
/*
|
||||
* Feature disable options
|
||||
* These options are also useful to firmware size reduction.
|
||||
*/
|
||||
|
||||
#define PREVENT_STUCK_MODIFIERS
|
||||
|
||||
/* disable debug print */
|
||||
//#define NO_DEBUG
|
||||
|
||||
/* disable print */
|
||||
//#define NO_PRINT
|
||||
|
||||
/* disable action features */
|
||||
//#define NO_ACTION_LAYER
|
||||
//#define NO_ACTION_TAPPING
|
||||
//#define NO_ACTION_ONESHOT
|
||||
//#define NO_ACTION_MACRO
|
||||
//#define NO_ACTION_FUNCTION
|
||||
|
||||
//UART settings for communication with the RF microcontroller
|
||||
#define SERIAL_UART_BAUD 1000000
|
||||
#define SERIAL_UART_DATA UDR1
|
||||
#define SERIAL_UART_UBRR (F_CPU / (16UL * SERIAL_UART_BAUD) - 1)
|
||||
#define SERIAL_UART_TXD_READY (UCSR1A & _BV(UDRE1))
|
||||
#define SERIAL_UART_RXD_PRESENT (UCSR1A & _BV(RXC1))
|
||||
#define SERIAL_UART_INIT() do { \
|
||||
/* baud rate */ \
|
||||
UBRR1L = SERIAL_UART_UBRR; \
|
||||
/* baud rate */ \
|
||||
UBRR1H = SERIAL_UART_UBRR >> 8; \
|
||||
/* enable TX and RX */ \
|
||||
UCSR1B = _BV(TXEN1) | _BV(RXEN1); \
|
||||
/* 8-bit data */ \
|
||||
UCSR1C = _BV(UCSZ11) | _BV(UCSZ10); \
|
||||
} while(0)
|
||||
|
||||
#endif
|
||||
191
keyboards/chimera_ls/keymaps/default/keymap.c
Normal file
191
keyboards/chimera_ls/keymaps/default/keymap.c
Normal file
@ -0,0 +1,191 @@
|
||||
// this is the style you want to emulate.
|
||||
// This is the canonical layout file for the Quantum project. If you want to add another keyboard,
|
||||
|
||||
#include "chimera_ls.h"
|
||||
|
||||
// Each layer gets a name for readability, which is then used in the keymap matrix below.
|
||||
// The underscores don't mean anything - you can have a layer called STUFF or any other name.
|
||||
// Layer names don't all need to be of the same length, obviously, and you can also skip them
|
||||
// entirely and just use numbers.
|
||||
enum chimera_lets_split_layers
|
||||
{
|
||||
_QWERTY,
|
||||
_CAPS,
|
||||
_NUMPAD,
|
||||
_SYMBOLS,
|
||||
_MACROS,
|
||||
_NAV
|
||||
};
|
||||
|
||||
#define KC_NMPD TG(_NUMPAD)
|
||||
#define KC_SYMB TG(_SYMBOLS)
|
||||
#define KC_SPFN LT(_NAV,KC_EQL)
|
||||
#define KC_SCTL MT(MOD_LCTL, KC_BSLS)
|
||||
#define KC_SCTR MT(MOD_LCTL, KC_RBRC)
|
||||
#define KC_SPLT MT(MOD_LALT, KC_MINS)
|
||||
#define KC_MESC LT(_MACROS, KC_ESC)
|
||||
#define KC_INCL M(0)
|
||||
#define KC_PULL M(1)
|
||||
#define KC_PUSH M(2)
|
||||
#define KC_SCAP M(3)
|
||||
#define KC_SCOF M(4)
|
||||
#define KC_CAD LALT(LCTL(KC_DEL))
|
||||
|
||||
#define LONGPRESS_DELAY 150
|
||||
//#define LAYER_TOGGLE_DELAY 300
|
||||
|
||||
// Fillers to make layering more clear
|
||||
#define _______ KC_TRNS
|
||||
#define XXXXXXX KC_NO
|
||||
#define KC_ KC_TRNS
|
||||
|
||||
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
|
||||
|
||||
[_QWERTY] = KC_KEYMAP(
|
||||
//,----+----+----+----+----+----. ,----+----+----+----+----+----.
|
||||
MESC, Q , W , E , R , T , Y , U , I , O , P ,BSPC,
|
||||
//|----+----+----+----+----+----| |----+----+----+----+----+----|
|
||||
TAB , A , S , D , F , G , H , J , K , L ,SCLN, ENT,
|
||||
//|----+----+----+----+----+----| |----+----+----+----+----+----|
|
||||
LSPO, Z , X , C , V , B , N , M ,COMM,DOT ,SLSH,RSPC,
|
||||
//|----+----+----+----+----+----| |----+----+----+----+----+----|
|
||||
SCTL,SPFN,SPLT,AMPR,NMPD,SPC , SPC ,SYMB,ASTR,EXLM,LBRC,SCTR
|
||||
//`----+----+----+----+----+----' `----+----+----+----+----+----'
|
||||
),
|
||||
|
||||
[_CAPS] = KC_KEYMAP(
|
||||
//,----+----+----+----+----+----. ,----+----+----+----+----+----.
|
||||
, , , , , , , , , , , ,
|
||||
//|----+----+----+----+----+----| |----+----+----+----+----+----|
|
||||
, , , , , , , , , ,COLN, ,
|
||||
//|----+----+----+----+----+----| |----+----+----+----+----+----|
|
||||
, , , , , , , , , , , ,
|
||||
//|----+----+----+----+----+----| |----+----+----+----+----+----|
|
||||
, ,UNDS, , , , , , , , ,
|
||||
//`----+----+----+----+----+----' `----+----+----+----+----+----'
|
||||
),
|
||||
|
||||
|
||||
[_NUMPAD] = KC_KEYMAP(
|
||||
//,----+----+----+----+----+----. ,----+----+----+----+----+----.
|
||||
, , , , , , , 7 , 8 , 9 ,MINS,QUOT,
|
||||
//|----+----+----+----+----+----| |----+----+----+----+----+----|
|
||||
, , , , , , , 4 , 5 , 6 ,PLUS, ENT,
|
||||
//|----+----+----+----+----+----| |----+----+----+----+----+----|
|
||||
LSFT, , , , , , , 1 , 2 , 3 ,ASTR, EQL,
|
||||
//|----+----+----+----+----+----| |----+----+----+----+----+----|
|
||||
, , , , ,BSPC, SPC , 0 , 0 , DOT,SLSH,
|
||||
//`----+----+----+----+----+----' `----+----+----+----+----+----'
|
||||
),
|
||||
|
||||
[_SYMBOLS] = KC_KEYMAP(
|
||||
//,----+----+----+----+----+----. ,----+----+----+----+----+----.
|
||||
,EXLM, AT ,HASH,DLR ,PERC, CIRC,AMPR,ASTR,LPRN,RPRN,QUOT,
|
||||
//|----+----+----+----+----+----| |----+----+----+----+----+----|
|
||||
F1 , F2 , F3 , F4 , F5 , F6 , TILD,EQL ,UNDS,LCBR,RCBR,PIPE,
|
||||
//|----+----+----+----+----+----| |----+----+----+----+----+----|
|
||||
F7 , F8 , F9 , F10, F11, F12, GRV ,PLUS,MINS,LBRC,RBRC,BSLS,
|
||||
//|----+----+----+----+----+----| |----+----+----+----+----+----|
|
||||
, , , , NO ,BSPC, SPC , , , , ,
|
||||
//`----+----+----+----+----+----' `----+----+----+----+----+----'
|
||||
),
|
||||
|
||||
[_NAV] = KC_KEYMAP(
|
||||
//,----+----+----+----+----+----. ,----+----+----+----+----+----.
|
||||
, , , , DEL,BSPC, ,HOME, UP , END, INS,PSCR,
|
||||
//|----+----+----+----+----+----| |----+----+----+----+----+----|
|
||||
, , ,LSFT,LCTL, ENT, ,LEFT,DOWN,RGHT, DEL, ,
|
||||
//|----+----+----+----+----+----| |----+----+----+----+----+----|
|
||||
, , , , , , ,PGUP,PGDN, , , ,
|
||||
//|----+----+----+----+----+----| |----+----+----+----+----+----|
|
||||
, , , , ,DEL , , , , , ,
|
||||
//`----+----+----+----+----+----' `----+----+----+----+----+----'
|
||||
),
|
||||
|
||||
[_MACROS] = KC_KEYMAP(
|
||||
//,----+----+----+----+----+----. ,----+----+----+----+----+----.
|
||||
, , , , , , , ,INCL, , , ,
|
||||
//|----+----+----+----+----+----| |----+----+----+----+----+----|
|
||||
, , ,CAD , , , , , , , , ,
|
||||
//|----+----+----+----+----+----| |----+----+----+----+----+----|
|
||||
SCAP, , , , , , , ,PULL,PUSH, ,SCAP,
|
||||
//|----+----+----+----+----+----| |----+----+----+----+----+----|
|
||||
, , , , , , , , , , ,
|
||||
//`----+----+----+----+----+----' `----+----+----+----+----+----'
|
||||
),
|
||||
|
||||
};
|
||||
|
||||
|
||||
const uint16_t PROGMEM fn_actions[] = {
|
||||
|
||||
};
|
||||
|
||||
const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt)
|
||||
{
|
||||
switch(id) {
|
||||
/* include some kind of library or header */
|
||||
case 0:
|
||||
if (record->event.pressed) {
|
||||
SEND_STRING("#include <>");
|
||||
return MACRO( T(LEFT), END);
|
||||
}
|
||||
break;
|
||||
case 1:
|
||||
if (record->event.pressed) {
|
||||
SEND_STRING("git pull");
|
||||
return MACRO( T(ENT), END );
|
||||
}
|
||||
break;
|
||||
case 2:
|
||||
if (record->event.pressed){
|
||||
SEND_STRING("git push");
|
||||
return MACRO( T(ENT), END );
|
||||
}
|
||||
break;
|
||||
case 3:
|
||||
if (record->event.pressed){
|
||||
layer_on(_CAPS);
|
||||
register_code(KC_CAPSLOCK);
|
||||
unregister_code(KC_CAPSLOCK);
|
||||
}
|
||||
break;
|
||||
case 4:
|
||||
if (record->event.pressed){
|
||||
layer_off(_CAPS);
|
||||
register_code(KC_CAPSLOCK);
|
||||
unregister_code(KC_CAPSLOCK);
|
||||
}
|
||||
break;
|
||||
}
|
||||
return MACRO_NONE;
|
||||
};
|
||||
|
||||
|
||||
void matrix_scan_user(void) {
|
||||
uint8_t layer = biton32(layer_state);
|
||||
|
||||
switch (layer) {
|
||||
case _QWERTY:
|
||||
set_led_green;
|
||||
break;
|
||||
case _CAPS:
|
||||
set_led_white;
|
||||
break;
|
||||
case _NUMPAD:
|
||||
set_led_blue;
|
||||
break;
|
||||
case _SYMBOLS:
|
||||
set_led_red;
|
||||
break;
|
||||
case _NAV:
|
||||
set_led_magenta;
|
||||
break;
|
||||
case _MACROS:
|
||||
set_led_cyan;
|
||||
break;
|
||||
default:
|
||||
set_led_green;
|
||||
break;
|
||||
}
|
||||
};
|
||||
168
keyboards/chimera_ls/matrix.c
Normal file
168
keyboards/chimera_ls/matrix.c
Normal file
@ -0,0 +1,168 @@
|
||||
/*
|
||||
Copyright 2012 Jun Wako
|
||||
Copyright 2014 Jack Humbert
|
||||
|
||||
This program is free software: you can redistribute it and/or modify
|
||||
it under the terms of the GNU General Public License as published by
|
||||
the Free Software Foundation, either version 2 of the License, or
|
||||
(at your option) any later version.
|
||||
|
||||
This program is distributed in the hope that it will be useful,
|
||||
but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
GNU General Public License for more details.
|
||||
|
||||
You should have received a copy of the GNU General Public License
|
||||
along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
*/
|
||||
#include <stdint.h>
|
||||
#include <stdbool.h>
|
||||
#if defined(__AVR__)
|
||||
#include <avr/io.h>
|
||||
#endif
|
||||
#include "wait.h"
|
||||
#include "print.h"
|
||||
#include "debug.h"
|
||||
#include "util.h"
|
||||
#include "matrix.h"
|
||||
#include "timer.h"
|
||||
|
||||
#if (MATRIX_COLS <= 8)
|
||||
# define print_matrix_header() print("\nr/c 01234567\n")
|
||||
# define print_matrix_row(row) print_bin_reverse8(matrix_get_row(row))
|
||||
# define matrix_bitpop(i) bitpop(matrix[i])
|
||||
# define ROW_SHIFTER ((uint8_t)1)
|
||||
#elif (MATRIX_COLS <= 16)
|
||||
# define print_matrix_header() print("\nr/c 0123456789ABCDEF\n")
|
||||
# define print_matrix_row(row) print_bin_reverse16(matrix_get_row(row))
|
||||
# define matrix_bitpop(i) bitpop16(matrix[i])
|
||||
# define ROW_SHIFTER ((uint16_t)1)
|
||||
#elif (MATRIX_COLS <= 32)
|
||||
# define print_matrix_header() print("\nr/c 0123456789ABCDEF0123456789ABCDEF\n")
|
||||
# define print_matrix_row(row) print_bin_reverse32(matrix_get_row(row))
|
||||
# define matrix_bitpop(i) bitpop32(matrix[i])
|
||||
# define ROW_SHIFTER ((uint32_t)1)
|
||||
#elif (MATRIX_COLS <= 64)
|
||||
# define print_matrix_header() print("\nr/c 0123456789ABCDEF0123456789ABCDEF0123456789ABCDEF\n")
|
||||
# define print_matrix_row(row) print_bin_reverse64(matrix_get_row(row))
|
||||
# define matrix_bitpop(i) bitpop64(matrix[i])
|
||||
# define ROW_SHIFTER ((uint64_t)1)
|
||||
#endif
|
||||
|
||||
/* matrix state(1:on, 0:off) */
|
||||
static matrix_row_t matrix[MATRIX_ROWS];
|
||||
|
||||
__attribute__ ((weak))
|
||||
void matrix_init_quantum(void) {
|
||||
matrix_init_kb();
|
||||
}
|
||||
|
||||
__attribute__ ((weak))
|
||||
void matrix_scan_quantum(void) {
|
||||
matrix_scan_kb();
|
||||
}
|
||||
|
||||
__attribute__ ((weak))
|
||||
void matrix_init_kb(void) {
|
||||
matrix_init_user();
|
||||
}
|
||||
|
||||
__attribute__ ((weak))
|
||||
void matrix_scan_kb(void) {
|
||||
matrix_scan_user();
|
||||
}
|
||||
|
||||
__attribute__ ((weak))
|
||||
void matrix_init_user(void) {
|
||||
}
|
||||
|
||||
__attribute__ ((weak))
|
||||
void matrix_scan_user(void) {
|
||||
}
|
||||
|
||||
inline
|
||||
uint8_t matrix_rows(void) {
|
||||
return MATRIX_ROWS;
|
||||
}
|
||||
|
||||
inline
|
||||
uint8_t matrix_cols(void) {
|
||||
return MATRIX_COLS;
|
||||
}
|
||||
|
||||
void matrix_init(void) {
|
||||
matrix_init_quantum();
|
||||
}
|
||||
|
||||
uint8_t matrix_scan(void)
|
||||
{
|
||||
SERIAL_UART_INIT();
|
||||
|
||||
uint32_t timeout = 0;
|
||||
|
||||
//the s character requests the RF slave to send the matrix
|
||||
SERIAL_UART_DATA = 's';
|
||||
|
||||
//trust the external keystates entirely, erase the last data
|
||||
uint8_t uart_data[11] = {0};
|
||||
|
||||
//there are 10 bytes corresponding to 10 columns, and an end byte
|
||||
for (uint8_t i = 0; i < 11; i++) {
|
||||
//wait for the serial data, timeout if it's been too long
|
||||
//this only happened in testing with a loose wire, but does no
|
||||
//harm to leave it in here
|
||||
while(!SERIAL_UART_RXD_PRESENT){
|
||||
timeout++;
|
||||
if (timeout > 10000){
|
||||
break;
|
||||
}
|
||||
}
|
||||
uart_data[i] = SERIAL_UART_DATA;
|
||||
}
|
||||
|
||||
//check for the end packet, the key state bytes use the LSBs, so 0xE0
|
||||
//will only show up here if the correct bytes were recieved
|
||||
if (uart_data[10] == 0xE0)
|
||||
{
|
||||
//shifting and transferring the keystates to the QMK matrix variable
|
||||
for (uint8_t i = 0; i < MATRIX_ROWS; i++) {
|
||||
matrix[i] = (uint16_t) uart_data[i*2] | (uint16_t) uart_data[i*2+1] << 5;
|
||||
}
|
||||
}
|
||||
|
||||
|
||||
matrix_scan_quantum();
|
||||
return 1;
|
||||
}
|
||||
|
||||
inline
|
||||
bool matrix_is_on(uint8_t row, uint8_t col)
|
||||
{
|
||||
return (matrix[row] & ((matrix_row_t)1<col));
|
||||
}
|
||||
|
||||
inline
|
||||
matrix_row_t matrix_get_row(uint8_t row)
|
||||
{
|
||||
return matrix[row];
|
||||
}
|
||||
|
||||
void matrix_print(void)
|
||||
{
|
||||
print_matrix_header();
|
||||
|
||||
for (uint8_t row = 0; row < MATRIX_ROWS; row++) {
|
||||
phex(row); print(": ");
|
||||
print_matrix_row(row);
|
||||
print("\n");
|
||||
}
|
||||
}
|
||||
|
||||
uint8_t matrix_key_count(void)
|
||||
{
|
||||
uint8_t count = 0;
|
||||
for (uint8_t i = 0; i < MATRIX_ROWS; i++) {
|
||||
count += matrix_bitpop(i);
|
||||
}
|
||||
return count;
|
||||
}
|
||||
19
keyboards/chimera_ls/readme.md
Normal file
19
keyboards/chimera_ls/readme.md
Normal file
@ -0,0 +1,19 @@
|
||||
# Chimera LS
|
||||
|
||||
|
||||
|
||||
A wireless version of the let's split: a split 40% ortholinear keyboard
|
||||
|
||||
Keyboard Maintainer: [William Wilson](https://github.com/GlenPickle)
|
||||
|
||||
|
||||
Hardware Supported: Chimera LS PCB, WaveShare core nRF51822
|
||||
|
||||
Hardware Availability: [Gerbers](https://github.com/GlenPickle/Chimera/tree/master/ls/gerbers)
|
||||
|
||||
Make example for this keyboard (after setting up your build environment):
|
||||
|
||||
make chimera_ls:default
|
||||
|
||||
See [build environment setup](https://docs.qmk.fm/build_environment_setup.html) then the [make instructions](https://docs.qmk.fm/make_instructions.html) for more information.
|
||||
|
||||
82
keyboards/chimera_ls/rules.mk
Normal file
82
keyboards/chimera_ls/rules.mk
Normal file
@ -0,0 +1,82 @@
|
||||
|
||||
OPT_DEFS += -DCHIMERA_LS_PROMICRO
|
||||
CHIMERA_LS_UPLOAD_COMMAND = while [ ! -r $(USB) ]; do sleep 1; done; \
|
||||
avrdude -p $(MCU) -c avr109 -U flash:w:$(TARGET).hex -P $(USB)
|
||||
|
||||
# # project specific files
|
||||
SRC = matrix.c
|
||||
|
||||
|
||||
# MCU name
|
||||
#MCU = at90usb1287
|
||||
MCU = atmega32u4
|
||||
|
||||
# Processor frequency.
|
||||
# This will define a symbol, F_CPU, in all source code files equal to the
|
||||
# processor frequency in Hz. You can then use this symbol in your source code to
|
||||
# calculate timings. Do NOT tack on a 'UL' at the end, this will be done
|
||||
# automatically to create a 32-bit value in your source code.
|
||||
#
|
||||
# This will be an integer division of F_USB below, as it is sourced by
|
||||
# F_USB after it has run through any CPU prescalers. Note that this value
|
||||
# does not *change* the processor frequency - it should merely be updated to
|
||||
# reflect the processor speed set externally so that the code can use accurate
|
||||
# software delays.
|
||||
F_CPU = 16000000
|
||||
|
||||
|
||||
#
|
||||
# LUFA specific
|
||||
#
|
||||
# Target architecture (see library "Board Types" documentation).
|
||||
ARCH = AVR8
|
||||
|
||||
# Input clock frequency.
|
||||
# This will define a symbol, F_USB, in all source code files equal to the
|
||||
# input clock frequency (before any prescaling is performed) in Hz. This value may
|
||||
# differ from F_CPU if prescaling is used on the latter, and is required as the
|
||||
# raw input clock is fed directly to the PLL sections of the AVR for high speed
|
||||
# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
|
||||
# at the end, this will be done automatically to create a 32-bit value in your
|
||||
# source code.
|
||||
#
|
||||
# If no clock division is performed on the input clock inside the AVR (via the
|
||||
# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
|
||||
F_USB = $(F_CPU)
|
||||
|
||||
# Bootloader
|
||||
# This definition is optional, and if your keyboard supports multiple bootloaders of
|
||||
# different sizes, comment this out, and the correct address will be loaded
|
||||
# automatically (+60). See bootloader.mk for all options.
|
||||
BOOTLOADER = caterina
|
||||
|
||||
# Interrupt driven control endpoint task(+60)
|
||||
OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
|
||||
|
||||
# Boot Section Size in *bytes*
|
||||
# Teensy halfKay 512
|
||||
# Teensy++ halfKay 1024
|
||||
# Atmel DFU loader 4096
|
||||
# LUFA bootloader 4096
|
||||
# USBaspLoader 2048
|
||||
OPT_DEFS += -DBOOTLOADER_SIZE=4096
|
||||
|
||||
|
||||
# Build Options
|
||||
# comment out to disable the options.
|
||||
#
|
||||
#BOOTMAGIC_ENABLE = yes # Virtual DIP switch configuration(+1000)
|
||||
MOUSEKEY_ENABLE = yes # Mouse keys(+4700)
|
||||
EXTRAKEY_ENABLE = yes # Audio control and System control(+450)
|
||||
CONSOLE_ENABLE = yes # Console for debug(+400)
|
||||
COMMAND_ENABLE = yes # Commands for debug and configuration
|
||||
CUSTOM_MATRIX = yes # Remote matrix from the wireless bridge
|
||||
# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
|
||||
# SLEEP_LED_ENABLE = yes # Breathing sleep LED during USB suspend
|
||||
NKRO_ENABLE = yes # USB Nkey Rollover - not yet supported in LUFA
|
||||
# BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality
|
||||
# MIDI_ENABLE = YES # MIDI controls
|
||||
UNICODE_ENABLE = YES # Unicode
|
||||
# BLUETOOTH_ENABLE = yes # Enable Bluetooth with the Adafruit EZ-Key HID
|
||||
|
||||
USB = /dev/ttyACM0
|
||||
@ -49,7 +49,7 @@
|
||||
// This a shortcut to help you visually see your layout.
|
||||
// The first section contains all of the arguements
|
||||
// The second converts the arguments into a two-dimensional array
|
||||
#define KEYMAP( \
|
||||
#define KC_KEYMAP( \
|
||||
k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k10, k11, k12, k13, \
|
||||
k14, k15, k16, k17, k18, k19, k20, k21, k22, k23, k24, k25, k26, k27, \
|
||||
k28, k29, k31, k32, k33, k34, k35, k36, k37, k38, k41, k42, k43, k44,\
|
||||
@ -63,4 +63,17 @@
|
||||
{ KC_NO, KC_##k28, KC_##k14, KC_##k00, KC_##k45, KC_##k48, KC_##k13, KC_##k27, KC_##k44, KC_NO }, \
|
||||
}
|
||||
|
||||
#define KEYMAP( \
|
||||
k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k10, k11, k12, k13, \
|
||||
k14, k15, k16, k17, k18, k19, k20, k21, k22, k23, k24, k25, k26, k27, \
|
||||
k28, k29, k31, k32, k33, k34, k35, k36, k37, k38, k41, k42, k43, k44,\
|
||||
k45, k46, k47, k48 \
|
||||
) \
|
||||
{ \
|
||||
{ k01, k02, k03, k04, k05, k08, k09, k10, k11, k12 }, \
|
||||
{ k15, k16, k17, k18, k19, k22, k23, k24, k25, k26 }, \
|
||||
{ k29, k31, k32, k33, k34, k37, k38, k41, k42, k43 }, \
|
||||
{ KC_NO, k06, k20, k35, k46, k47, k36, k21, k07, KC_NO }, \
|
||||
{ KC_NO, k28, k14, k00, k45, k48, k13, k27, k44, KC_NO }, \
|
||||
}
|
||||
#endif
|
||||
|
||||
@ -44,7 +44,7 @@ enum chimera_ortho_layers
|
||||
|
||||
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
|
||||
|
||||
[_QWERTY] = KEYMAP(
|
||||
[_QWERTY] = KC_KEYMAP(
|
||||
//,----+----+----+----+----+----+----. ,----+----+----+----+----+----+----.
|
||||
MESC, Q , W , E , R , T ,SCTL, SCTR, Y , U , I , O , P ,QUOT,
|
||||
//|----+----+----+----+----+----+----| |----+----+----+----+----+----+----|
|
||||
@ -56,7 +56,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
|
||||
// \------------------+----+----+---/ \---+----+----+-------------------/
|
||||
),
|
||||
|
||||
[_CAPS] = KEYMAP(
|
||||
[_CAPS] = KC_KEYMAP(
|
||||
//,----+----+----+----+----+----+----. ,----+----+----+----+----+----+----.
|
||||
, , , , , , , , , , , , , ,
|
||||
//|----+----+----+----+----+----+----| |----+----+----+----+----+----+----|
|
||||
@ -68,7 +68,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
|
||||
// \------------------+----+----+---/ \---+----+----+-------------------/
|
||||
),
|
||||
|
||||
[_NUMPAD] = KEYMAP(
|
||||
[_NUMPAD] = KC_KEYMAP(
|
||||
//,----+----+----+----+----+----+----. ,----+----+----+----+----+----+----.
|
||||
, ,COLN , , , , , , , 7 , 8 , 9 ,ASTR,MINS,
|
||||
//|----+----+----+----+----+----+----| |----+----+----+----+----+----+----|
|
||||
@ -80,7 +80,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
|
||||
// \------------------+----+----+---/ \---+----+----+-------------------/
|
||||
),
|
||||
|
||||
[_SYMBOLS] = KEYMAP(
|
||||
[_SYMBOLS] = KC_KEYMAP(
|
||||
//,----+----+----+----+----+----+----. ,----+----+----+----+----+----+----.
|
||||
,EXLM, AT ,HASH,DLR ,PERC, , ,CIRC,AMPR,ASTR,LPRN,RPRN,BSLS,
|
||||
//|----+----+----+----+----+----+----| |----+----+----+----+----+----+----|
|
||||
@ -92,7 +92,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
|
||||
// \------------------+----+----+---/ \---+----+----+-------------------/
|
||||
),
|
||||
|
||||
[_NAV] = KEYMAP(
|
||||
[_NAV] = KC_KEYMAP(
|
||||
//,----+----+----+----+----+----+----. ,----+----+----+----+----+----+----.
|
||||
, , , , , , , , , , UP , ,PSCR, ,
|
||||
//|----+----+----+----+----+----+----| |----+----+----+----+----+----+----|
|
||||
@ -104,7 +104,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
|
||||
// \------------------+----+----+---/ \---+----+----+-------------------/
|
||||
),
|
||||
|
||||
[_MACROS] = KEYMAP(
|
||||
[_MACROS] = KC_KEYMAP(
|
||||
//,----+----+----+----+----+----+----. ,----+----+----+----+----+----+----.
|
||||
, , , , , , , , , ,INCL, , , ,
|
||||
//|----+----+----+----+----+----+----| |----+----+----+----+----+----+----|
|
||||
|
||||
@ -206,7 +206,7 @@ qk_tap_dance_action_t tap_dance_actions[] = {
|
||||
|
||||
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
|
||||
|
||||
[_QWERTY] = KEYMAP(
|
||||
[_QWERTY] = KC_KEYMAP(
|
||||
//,----+----+----+----+----+----+----. ,----+----+----+----+----+----+----.
|
||||
MESC, Q ,CSHW,ENAV, R , T ,SPC , CLPS, Y , U ,INAV, O , P ,TTT,
|
||||
//|----+----+----+----+----+----+----| |----+----+----+----+----+----+----|
|
||||
@ -218,7 +218,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
|
||||
// \------------------+----+----+---/ \---+----+----+-------------------/
|
||||
),
|
||||
|
||||
[_NUMPAD] = KEYMAP(
|
||||
[_NUMPAD] = KC_KEYMAP(
|
||||
//,----+----+----+----+----+----+----. ,----+----+----+----+----+----+----.
|
||||
, , , ,ASTR, , , , , 7 , 8 , 9 ,ASTR,/**/,
|
||||
//|----+----+----+----+----+----+----| |----+----+----+----+----+----+----|
|
||||
@ -230,7 +230,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
|
||||
// \------------------+----+----+---/ \---+----+----+-------------------/
|
||||
),
|
||||
|
||||
[_SYMBOLS] = KEYMAP(
|
||||
[_SYMBOLS] = KC_KEYMAP(
|
||||
//,----+----+-----+----+----+----+----. ,----+----+----+----+----+----+----.
|
||||
,EXLM, AT ,LCBR,RCBR,HASH, , ,CIRC,AMPR,ASTR,LPRN,RPRN,/**/,
|
||||
//|----+----+-----+----+----+----+----| |----+----+----+----+----+----+----|
|
||||
@ -242,7 +242,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
|
||||
// \-------------------+----+----+---/ \---+----+----+-------------------/
|
||||
),
|
||||
|
||||
[_FUNCTION] = KEYMAP(
|
||||
[_FUNCTION] = KC_KEYMAP(
|
||||
//,----+----+----+----+----+----+----. ,----+----+----+----+----+----+----.
|
||||
F6F7 ,F1 ,F2 ,F3 ,ALF4,F5 ,F6 , F7 ,F8 ,F9 ,F10 ,F11 ,F12 ,/**/,
|
||||
//|----+----+----+----+----+----+----| |----+----+----+----+----+----+----|
|
||||
@ -254,7 +254,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
|
||||
// \------------------+----+----+---/ \---+----+----+-------------------/
|
||||
),
|
||||
|
||||
[_NAV] = KEYMAP(
|
||||
[_NAV] = KC_KEYMAP(
|
||||
//,----+----+----+----+----+----+----. ,----+----+----+----+----+----+----.
|
||||
, ,SNAPLEFT,/**/,SNAPRIGHT,, , , , , UP , , , ,
|
||||
//|----+----+----+----+----+----+----| |----+----+----+----+----+----+----|
|
||||
@ -266,7 +266,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
|
||||
// \------------------+----+----+---/ \---+----+----+-------------------/
|
||||
),
|
||||
|
||||
[_TEXTNAV] = KEYMAP(
|
||||
[_TEXTNAV] = KC_KEYMAP(
|
||||
//,----+----+----+----+----+----+----. ,----+----+----+----+----+----+----.
|
||||
, , , , , , , , , ,/**/, , , ,
|
||||
//|----+----+----+----+----+----+----| |----+----+----+----+----+----+----|
|
||||
@ -278,7 +278,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
|
||||
// \------------------+----+----+---/ \---+----+----+-------------------/
|
||||
),
|
||||
|
||||
[_MOUSE] = KEYMAP(
|
||||
[_MOUSE] = KC_KEYMAP(
|
||||
//,----+----+----+----+----+----+----. ,----+----+----+----+----+----+----.
|
||||
, , ,MS_UP, , , , , , , UP , , , ,/**/
|
||||
//|----+----+----+----+----+----+----| |----+----+----+----+----+----+----|
|
||||
@ -291,7 +291,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
|
||||
),
|
||||
|
||||
|
||||
[_MACROS] = KEYMAP(
|
||||
[_MACROS] = KC_KEYMAP(
|
||||
//,----+----+----+----+----+----+----. ,----+----+----+----+----+----+----.
|
||||
/**/,RESET,SECRET_2,SECRET_3, , , ,SYSTEM_SLEEP, , ,INCL, , , ,
|
||||
//|----+----+----+----+----+----+----| |----+----+----+----+----+----+----|
|
||||
|
||||
@ -2,11 +2,8 @@
|
||||
#define SPLIT_KEYBOARD_UTIL_H
|
||||
|
||||
#include <stdbool.h>
|
||||
#include "eeconfig.h"
|
||||
|
||||
#ifdef EE_HANDS
|
||||
#define EECONFIG_BOOTMAGIC_END (uint8_t *)10
|
||||
#define EECONFIG_HANDEDNESS EECONFIG_BOOTMAGIC_END
|
||||
#endif
|
||||
|
||||
#define SLAVE_I2C_ADDRESS 0x32
|
||||
|
||||
|
||||
14
keyboards/dilly/README.md
Normal file
14
keyboards/dilly/README.md
Normal file
@ -0,0 +1,14 @@
|
||||
Dilly
|
||||
=====
|
||||
|
||||
A 3x10 ortholinear keyboard using Kailh PG1350 Lower Profile Choc switches.
|
||||
|
||||
Keyboard Maintainer: Keebio
|
||||
Hardware Supported: Dilly PCB, Arduino Pro Micro
|
||||
Hardware Availability: [Keebio](https://keeb.io)
|
||||
|
||||
Make example for this keyboard (after setting up your build environment):
|
||||
|
||||
make dilly:default
|
||||
|
||||
See [build environment setup](https://docs.qmk.fm/build_environment_setup.html) then the [make instructions](https://docs.qmk.fm/make_instructions.html) for more information.
|
||||
62
keyboards/dilly/config.h
Normal file
62
keyboards/dilly/config.h
Normal file
@ -0,0 +1,62 @@
|
||||
#ifndef CONFIG_H
|
||||
#define CONFIG_H
|
||||
|
||||
#include "config_common.h"
|
||||
|
||||
/* USB Device descriptor parameter */
|
||||
#define VENDOR_ID 0xCB10
|
||||
#define PRODUCT_ID 0x113a
|
||||
#define DEVICE_VER 0x0100
|
||||
#define MANUFACTURER Keebio
|
||||
#define PRODUCT Dilly
|
||||
#define DESCRIPTION 30 percent ortholinear keyboard
|
||||
|
||||
/* key matrix size */
|
||||
#define MATRIX_ROWS 6
|
||||
#define MATRIX_COLS 5
|
||||
|
||||
/* key matrix pins */
|
||||
#define MATRIX_ROW_PINS { D7, E6, B4, B1, B3, B2 }
|
||||
#define MATRIX_COL_PINS { D2, D4, C6, F6, F5 }
|
||||
#define UNUSED_PINS
|
||||
|
||||
/* COL2ROW or ROW2COL */
|
||||
#define DIODE_DIRECTION COL2ROW
|
||||
|
||||
/* number of backlight levels */
|
||||
#define BACKLIGHT_PIN B5
|
||||
#ifdef BACKLIGHT_PIN
|
||||
#define BACKLIGHT_LEVELS 3
|
||||
#endif
|
||||
|
||||
/* Set 0 if debouncing isn't needed */
|
||||
#define DEBOUNCING_DELAY 5
|
||||
|
||||
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
|
||||
#define LOCKING_SUPPORT_ENABLE
|
||||
|
||||
/* Locking resynchronize hack */
|
||||
#define LOCKING_RESYNC_ENABLE
|
||||
|
||||
/* key combination for command */
|
||||
#define IS_COMMAND() ( \
|
||||
keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
|
||||
)
|
||||
|
||||
/* prevent stuck modifiers */
|
||||
#define PREVENT_STUCK_MODIFIERS
|
||||
|
||||
|
||||
#ifdef RGB_DI_PIN
|
||||
#define RGBLIGHT_ANIMATIONS
|
||||
#define RGBLIGHT_HUE_STEP 8
|
||||
#define RGBLIGHT_SAT_STEP 8
|
||||
#define RGBLIGHT_VAL_STEP 8
|
||||
#endif
|
||||
#define RGB_DI_PIN D3
|
||||
#define RGBLIGHT_TIMER
|
||||
#define RGBLED_NUM 10
|
||||
#define ws2812_PORTREG PORTD
|
||||
#define ws2812_DDRREG DDRD
|
||||
|
||||
#endif
|
||||
1
keyboards/dilly/dilly.c
Normal file
1
keyboards/dilly/dilly.c
Normal file
@ -0,0 +1 @@
|
||||
#include "dilly.h"
|
||||
31
keyboards/dilly/dilly.h
Normal file
31
keyboards/dilly/dilly.h
Normal file
@ -0,0 +1,31 @@
|
||||
#ifndef DILLY_H
|
||||
#define DILLY_H
|
||||
|
||||
#include "quantum.h"
|
||||
|
||||
#define KEYMAP( \
|
||||
A1, A2, A3, A4, A5, A6, A7, A8, A9, A10, \
|
||||
B1, B2, B3, B4, B5, B6, B7, B8, B9, B10, \
|
||||
C1, C2, C3, C4, C5, C6, C7, C8, C9, C10 \
|
||||
) { \
|
||||
{ A1, A2, A3, A4, A5 }, \
|
||||
{ B1, B2, B3, B4, B5 }, \
|
||||
{ C1, C2, C3, C4, C5 }, \
|
||||
{ A10, A9, A8, A7, A6 }, \
|
||||
{ B10, B9, B8, B7, B6 }, \
|
||||
{ C10, C9, C8, C7, C6 } \
|
||||
}
|
||||
|
||||
// Used to create a keymap using only KC_ prefixed keys
|
||||
#define KC_KEYMAP( \
|
||||
A1, A2, A3, A4, A5, A6, A7, A8, A9, A10, \
|
||||
B1, B2, B3, B4, B5, B6, B7, B8, B9, B10, \
|
||||
C1, C2, C3, C4, C5, C6, C7, C8, C9, C10 \
|
||||
) \
|
||||
KEYMAP( \
|
||||
KC_##A1, KC_##A2, KC_##A3, KC_##A4, KC_##A5, KC_##A6, KC_##A7, KC_##A8, KC_##A9, KC_##A10, \
|
||||
KC_##B1, KC_##B2, KC_##B3, KC_##B4, KC_##B5, KC_##B6, KC_##B7, KC_##B8, KC_##B9, KC_##B10, \
|
||||
KC_##C1, KC_##C2, KC_##C3, KC_##C4, KC_##C5, KC_##C6, KC_##C7, KC_##C8, KC_##C9, KC_##C10 \
|
||||
)
|
||||
|
||||
#endif
|
||||
6
keyboards/dilly/keymaps/default/config.h
Normal file
6
keyboards/dilly/keymaps/default/config.h
Normal file
@ -0,0 +1,6 @@
|
||||
#ifndef CONFIG_USER_H
|
||||
#define CONFIG_USER_H
|
||||
|
||||
#include "../../config.h"
|
||||
|
||||
#endif
|
||||
107
keyboards/dilly/keymaps/default/keymap.c
Normal file
107
keyboards/dilly/keymaps/default/keymap.c
Normal file
@ -0,0 +1,107 @@
|
||||
#include "dilly.h"
|
||||
#include "action_layer.h"
|
||||
|
||||
extern keymap_config_t keymap_config;
|
||||
|
||||
#define _BASE 0
|
||||
#define _FN1 1
|
||||
#define _FN2 2
|
||||
#define _FN3 3
|
||||
#define _FN4 4
|
||||
#define _FN5 5
|
||||
|
||||
#define KC_ KC_TRNS
|
||||
#define _______ KC_TRNS
|
||||
|
||||
// Tap-Hold keys
|
||||
#define KC_ASFT MT(MOD_LSFT, KC_A)
|
||||
#define KC_F_L3 LT(_FN3, KC_F)
|
||||
#define KC_ZCTL MT(MOD_LCTL, KC_Z)
|
||||
#define KC_XALT MT(MOD_LALT, KC_X)
|
||||
#define KC_CGUI MT(MOD_LGUI, KC_C)
|
||||
#define KC_V_L4 LT(_FN4, KC_V)
|
||||
#define KC_SPL2 LT(_FN2, KC_SPC)
|
||||
#define KC_B_L1 LT(_FN1, KC_B)
|
||||
#define KC_N_L5 LT(_FN5, KC_N)
|
||||
#define KC_MALT MT(MOD_RALT, KC_M)
|
||||
#define KC_BSCT MT(MOD_RCTL, KC_BSPC)
|
||||
#define KC_ENTS MT(MOD_RSFT, KC_ENT)
|
||||
#define KC_ESCS MT(MOD_RSFT, KC_ESC)
|
||||
|
||||
#define KC_GUIC LGUI(KC_C)
|
||||
|
||||
#define KC_RST RESET
|
||||
#define KC_BL_S BL_STEP
|
||||
#define KC_DBUG DEBUG
|
||||
#define KC_RTOG RGB_TOG
|
||||
#define KC_RMOD RGB_MOD
|
||||
#define KC_RHUI RGB_HUI
|
||||
#define KC_RHUD RGB_HUD
|
||||
#define KC_RSAI RGB_SAI
|
||||
#define KC_RSAD RGB_SAD
|
||||
#define KC_RVAI RGB_VAI
|
||||
#define KC_RVAD RGB_VAD
|
||||
|
||||
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
|
||||
|
||||
[_BASE] = KC_KEYMAP(
|
||||
//,----+----+----+----+----+----+----+----+----+----.
|
||||
Q , W , E , R , T , Y , U , I , O , P ,
|
||||
//|----+----+----+----+----+----+----+----+----+----|
|
||||
ASFT, S , D ,F_L3, G , H , J , K , L ,ESCS,
|
||||
//|----+----+----+----+----+----+----+----+----+----|
|
||||
ZCTL,XALT,CGUI,V_L4,SPL2,B_L1,N_L5,MALT,BSCT,ENTS
|
||||
//`----+----+----+----+----+----+----+----+----+----'
|
||||
),
|
||||
|
||||
[_FN1] = KC_KEYMAP(
|
||||
//,----+----+----+----+----+----+----+----+----+----.
|
||||
1 , 2 , 3 , 4 , 5 , 6 , 7 , 8 , 9 , 0 ,
|
||||
//|----+----+----+----+----+----+----+----+----+----|
|
||||
F1 , F2 , F3 , F4 , F5 , F6 , F7 , F8 , F9 ,F10 ,
|
||||
//|----+----+----+----+----+----+----+----+----+----|
|
||||
, , , ,BSPC, , , , ,
|
||||
//`----+----+----+----+----+----+----+----+----+----'
|
||||
),
|
||||
|
||||
[_FN2] = KC_KEYMAP(
|
||||
//,----+----+----+----+----+----+----+----+----+----.
|
||||
EXLM, AT ,HASH,DLR ,PERC,CIRC,AMPR,ASTR,LPRN,RPRN,
|
||||
//|----+----+----+----+----+----+----+----+----+----|
|
||||
F11 ,F12 , , , , , , , ,GRV ,
|
||||
//|----+----+----+----+----+----+----+----+----+----|
|
||||
, , , , ,DEL , , , ,
|
||||
//`----+----+----+----+----+----+----+----+----+----'
|
||||
),
|
||||
|
||||
[_FN3] = KC_KEYMAP(
|
||||
//,----+----+----+----+----+----+----+----+----+----.
|
||||
, , , , ,MINS,EQL ,LBRC,RBRC,BSLS,
|
||||
//|----+----+----+----+----+----+----+----+----+----|
|
||||
TAB , , , , ,COMM,DOT ,SLSH,SCLN,QUOT,
|
||||
//|----+----+----+----+----+----+----+----+----+----|
|
||||
, , , ,BSPC, ,LEFT,DOWN, UP ,RGHT
|
||||
//`----+----+----+----+----+----+----+----+----+----'
|
||||
),
|
||||
|
||||
[_FN4] = KC_KEYMAP(
|
||||
//,----+----+----+----+----+----+----+----+----+----.
|
||||
, , , , ,UNDS,PLUS,LCBR,RCBR,PIPE,
|
||||
//|----+----+----+----+----+----+----+----+----+----|
|
||||
TAB , , , , , LT , GT ,QUES,COLN,DQUO,
|
||||
//|----+----+----+----+----+----+----+----+----+----|
|
||||
, ,GUIC, ,BSPC, ,HOME,PGDN,PGUP,END
|
||||
//`----+----+----+----+----+----+----+----+----+----'
|
||||
),
|
||||
|
||||
[_FN5] = KC_KEYMAP(
|
||||
//,----+----+----+----+----+----+----+----+----+----.
|
||||
RTOG,RMOD, ,RST ,RHUI,RSAI,RVAI, , , ,
|
||||
//|----+----+----+----+----+----+----+----+----+----|
|
||||
, ,DBUG, ,RHUD,RSAD,RVAD, , , ,
|
||||
//|----+----+----+----+----+----+----+----+----+----|
|
||||
BL_S, ,GUIC, , , , , , ,
|
||||
//`----+----+----+----+----+----+----+----+----+----'
|
||||
)
|
||||
|
||||
};
|
||||
1
keyboards/dilly/keymaps/default/rules.mk
Normal file
1
keyboards/dilly/keymaps/default/rules.mk
Normal file
@ -0,0 +1 @@
|
||||
RGBLIGHT_ENABLE = yes
|
||||
56
keyboards/dilly/rules.mk
Normal file
56
keyboards/dilly/rules.mk
Normal file
@ -0,0 +1,56 @@
|
||||
# MCU name
|
||||
MCU = atmega32u4
|
||||
|
||||
# Processor frequency.
|
||||
# This will define a symbol, F_CPU, in all source code files equal to the
|
||||
# processor frequency in Hz. You can then use this symbol in your source code to
|
||||
# calculate timings. Do NOT tack on a 'UL' at the end, this will be done
|
||||
# automatically to create a 32-bit value in your source code.
|
||||
#
|
||||
# This will be an integer division of F_USB below, as it is sourced by
|
||||
# F_USB after it has run through any CPU prescalers. Note that this value
|
||||
# does not *change* the processor frequency - it should merely be updated to
|
||||
# reflect the processor speed set externally so that the code can use accurate
|
||||
# software delays.
|
||||
F_CPU = 16000000
|
||||
|
||||
#
|
||||
# LUFA specific
|
||||
#
|
||||
# Target architecture (see library "Board Types" documentation).
|
||||
ARCH = AVR8
|
||||
|
||||
# Input clock frequency.
|
||||
# This will define a symbol, F_USB, in all source code files equal to the
|
||||
# input clock frequency (before any prescaling is performed) in Hz. This value may
|
||||
# differ from F_CPU if prescaling is used on the latter, and is required as the
|
||||
# raw input clock is fed directly to the PLL sections of the AVR for high speed
|
||||
# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
|
||||
# at the end, this will be done automatically to create a 32-bit value in your
|
||||
# source code.
|
||||
#
|
||||
# If no clock division is performed on the input clock inside the AVR (via the
|
||||
# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
|
||||
F_USB = $(F_CPU)
|
||||
|
||||
# Interrupt driven control endpoint task(+60)
|
||||
OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
|
||||
|
||||
|
||||
# Boot Section Size in *bytes*
|
||||
OPT_DEFS += -DBOOTLOADER_SIZE=4096
|
||||
|
||||
|
||||
# Build Options
|
||||
# comment out to disable the options.
|
||||
#
|
||||
BOOTMAGIC_ENABLE = yes # Virtual DIP switch configuration(+1000)
|
||||
MOUSEKEY_ENABLE = yes # Mouse keys(+4700)
|
||||
EXTRAKEY_ENABLE = yes # Audio control and System control(+450)
|
||||
CONSOLE_ENABLE = no # Console for debug(+400)
|
||||
COMMAND_ENABLE = no # Commands for debug and configuration
|
||||
SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
|
||||
NKRO_ENABLE = yes # USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
|
||||
BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality
|
||||
AUDIO_ENABLE = no
|
||||
RGBLIGHT_ENABLE = yes
|
||||
@ -2,11 +2,7 @@
|
||||
#define SPLIT_KEYBOARD_UTIL_H
|
||||
|
||||
#include <stdbool.h>
|
||||
|
||||
#ifdef EE_HANDS
|
||||
#define EECONFIG_BOOTMAGIC_END (uint8_t *)10
|
||||
#define EECONFIG_HANDEDNESS EECONFIG_BOOTMAGIC_END
|
||||
#endif
|
||||
#include "eeconfig.h"
|
||||
|
||||
#define SLAVE_I2C_ADDRESS 0x32
|
||||
|
||||
|
||||
@ -2,11 +2,7 @@
|
||||
#define SPLIT_KEYBOARD_UTIL_H
|
||||
|
||||
#include <stdbool.h>
|
||||
|
||||
#ifdef EE_HANDS
|
||||
#define EECONFIG_BOOTMAGIC_END (uint8_t *)10
|
||||
#define EECONFIG_HANDEDNESS EECONFIG_BOOTMAGIC_END
|
||||
#endif
|
||||
#include "eeconfig.h"
|
||||
|
||||
#define SLAVE_I2C_ADDRESS 0x32
|
||||
|
||||
|
||||
16
keyboards/iris/info.json
Normal file
16
keyboards/iris/info.json
Normal file
@ -0,0 +1,16 @@
|
||||
{
|
||||
"keyboard_name": "Iris",
|
||||
"manufacturer": "Keebio",
|
||||
"identifier": "0x1256",
|
||||
"url": "Keeb.io",
|
||||
"maintainer": "qmk",
|
||||
"processor": "atmega32u4",
|
||||
"bootloader": "",
|
||||
"width": 14.5,
|
||||
"height": 5,
|
||||
"layouts": {
|
||||
"KEYMAP": {
|
||||
"layout": [{"x":0, "y":0}, {"x":1, "y":0}, {"x":2, "y":0}, {"x":3, "y":0}, {"x":4, "y":0}, {"x":5, "y":0}, {"x":8.5, "y":0}, {"x":9.5, "y":0}, {"x":10.5, "y":0}, {"x":11.5, "y":0}, {"x":12.5, "y":0}, {"x":13.5, "y":0}, {"x":0, "y":1}, {"x":1, "y":1}, {"x":2, "y":1}, {"x":3, "y":1}, {"x":4, "y":1}, {"x":5, "y":1}, {"x":8.5, "y":1}, {"x":9.5, "y":1}, {"x":10.5, "y":1}, {"x":11.5, "y":1}, {"x":12.5, "y":1}, {"x":13.5, "y":1}, {"x":0, "y":2}, {"x":1, "y":2}, {"x":2, "y":2}, {"x":3, "y":2}, {"x":4, "y":2}, {"x":5, "y":2}, {"x":8.5, "y":2}, {"x":9.5, "y":2}, {"x":10.5, "y":2}, {"x":11.5, "y":2}, {"x":12.5, "y":2}, {"x":13.5, "y":2}, {"x":0, "y":3}, {"x":1, "y":3}, {"x":2, "y":3}, {"x":3, "y":3}, {"x":4, "y":3}, {"x":5, "y":3}, {"x":6, "y":3}, {"x":7.5, "y":3}, {"x":8.5, "y":3}, {"x":9.5, "y":3}, {"x":10.5, "y":3}, {"x":11.5, "y":3}, {"x":12.5, "y":3}, {"x":13.5, "y":3}, {"x":4, "y":4}, {"x":5, "y":4}, {"x":6, "y":4}, {"x":7.5, "y":4}, {"x":8.5, "y":4}, {"x":9.5, "y":4}]
|
||||
}
|
||||
}
|
||||
}
|
||||
43
keyboards/iris/keymaps/yanfali/config.h
Normal file
43
keyboards/iris/keymaps/yanfali/config.h
Normal file
@ -0,0 +1,43 @@
|
||||
/*
|
||||
Copyright 2017 Danny Nguyen <danny@hexwire.com>
|
||||
|
||||
This program is free software: you can redistribute it and/or modify
|
||||
it under the terms of the GNU General Public License as published by
|
||||
the Free Software Foundation, either version 2 of the License, or
|
||||
(at your option) any later version.
|
||||
|
||||
This program is distributed in the hope that it will be useful,
|
||||
but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
GNU General Public License for more details.
|
||||
|
||||
You should have received a copy of the GNU General Public License
|
||||
along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
*/
|
||||
|
||||
#ifndef CONFIG_USER_H
|
||||
#define CONFIG_USER_H
|
||||
|
||||
#include "config_common.h"
|
||||
|
||||
/* Use I2C or Serial, not both */
|
||||
|
||||
#define USE_SERIAL
|
||||
// #define USE_I2C
|
||||
|
||||
/* Select hand configuration */
|
||||
|
||||
#define MASTER_LEFT
|
||||
// #define MASTER_RIGHT
|
||||
// #define EE_HANDS
|
||||
|
||||
#define TAPPING_TERM 150
|
||||
|
||||
#undef RGBLED_NUM
|
||||
#define RGBLIGHT_ANIMATIONS
|
||||
#define RGBLED_NUM 12
|
||||
#define RGBLIGHT_HUE_STEP 8
|
||||
#define RGBLIGHT_SAT_STEP 8
|
||||
#define RGBLIGHT_VAL_STEP 8
|
||||
|
||||
#endif
|
||||
145
keyboards/iris/keymaps/yanfali/keymap.c
Normal file
145
keyboards/iris/keymaps/yanfali/keymap.c
Normal file
@ -0,0 +1,145 @@
|
||||
#include "iris.h"
|
||||
#include "action_layer.h"
|
||||
#include "eeconfig.h"
|
||||
|
||||
extern keymap_config_t keymap_config;
|
||||
|
||||
#define _QWERTY 0
|
||||
#define _LOWER 1
|
||||
#define _RAISE 2
|
||||
#define _ADJUST 16
|
||||
|
||||
enum custom_keycodes {
|
||||
QWERTY = SAFE_RANGE,
|
||||
LOWER,
|
||||
RAISE,
|
||||
ADJUST,
|
||||
};
|
||||
|
||||
#define KC_ KC_TRNS
|
||||
#define _______ KC_TRNS
|
||||
|
||||
#define KC_CAPW LGUI(LSFT(KC_3)) // Capture whole screen
|
||||
#define KC_CPYW LGUI(LSFT(LCTL(KC_3))) // Copy whole screen
|
||||
#define KC_CAPP LGUI(LSFT(KC_4)) // Capture portion of screen
|
||||
#define KC_CPYP LGUI(LSFT(LCTL(KC_4))) // Copy portion of screen
|
||||
#define KC_ESCC MT(MOD_LCTL, KC_ESC) // Control (hold), Escape (tap)
|
||||
#define KC_BACK LGUI(KC_LEFT) // Browser Back
|
||||
#define KC_FORW LGUI(KC_RIGHT) // Browser Forward
|
||||
#define KC_LOWR LOWER
|
||||
#define KC_RASE RAISE
|
||||
#define KC_RST RESET
|
||||
#define KC_BL_S BL_STEP
|
||||
#define KC_ENTS MT(MOD_LSFT, KC_ENT)
|
||||
|
||||
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
|
||||
|
||||
[_QWERTY] = KC_KEYMAP(
|
||||
//,----+----+----+----+----+----. ,----+----+----+----+----+----.
|
||||
GRV , 1 , 2 , 3 , 4 , 5 , 6 , 7 , 8 , 9 , 0 ,MINS,
|
||||
//|----+----+----+----+----+----| |----+----+----+----+----+----|
|
||||
TAB , Q , W , E , R , T , Y , U , I , O , P ,PLUS,
|
||||
//|----+----+----+----+----+----| |----+----+----+----+----+----|
|
||||
ESCC, A , S , D , F , G , H , J , K , L ,SCLN,QUOT,
|
||||
//|----+----+----+----+----+----+----. ,----|----+----+----+----+----+----|
|
||||
LSFT, Z , X , C , V , B ,SPC , LALT, N , M ,COMM,DOT ,SLSH,DEL ,
|
||||
//`----+----+----+--+-+----+----+----/ \----+----+----+----+----+----+----'
|
||||
LGUI,LOWR,SPC , BSPC,ENTS,RASE
|
||||
// `----+----+----' `----+----+----'
|
||||
),
|
||||
|
||||
[_LOWER] = KC_KEYMAP(
|
||||
//,----+----+----+----+----+----. ,----+----+----+----+----+----.
|
||||
TILD,EXLM, AT ,HASH,DLR ,PERC, CIRC,AMPR,ASTR,LPRN,RPRN,BSPC,
|
||||
//|----+----+----+----+----+----| |----+----+----+----+----+----|
|
||||
RST , 1 , 2 , 3 , 4 , 5 , 6 , 7 , 8 , 9 , 0 , ,
|
||||
//|----+----+----+----+----+----| |----+----+----+----+----+----|
|
||||
DEL ,CAPP,LEFT,RGHT, UP ,LBRC, RBRC, P4 , P5 , P6 ,PLUS,PIPE,
|
||||
//|----+----+----+----+----+----+----. ,----|----+----+----+----+----+----|
|
||||
BL_S,CPYP, , ,DOWN,LCBR,LPRN, RPRN,RCBR, P1 , P2 , P3 ,MINS, ,
|
||||
//`----+----+----+--+-+----+----+----/ \----+----+----+----+----+----+----'
|
||||
, ,DEL , DEL , , P0
|
||||
// `----+----+----' `----+----+----'
|
||||
),
|
||||
|
||||
[_RAISE] = KC_KEYMAP(
|
||||
//,----+----+----+----+----+----. ,----+----+----+----+----+----.
|
||||
F12 , F1 , F2 , F3 , F4 , F5 , F6 , F7 , F8 , F9 ,F10 ,F11 ,
|
||||
//|----+----+----+----+----+----| |----+----+----+----+----+----|
|
||||
,EXLM, AT ,HASH,DLR ,PERC, CIRC,AMPR,ASTR,LPRN,RPRN, ,
|
||||
//|----+----+----+----+----+----| |----+----+----+----+----+----|
|
||||
DEL ,MPRV,BACK,FORW,PGUP,UNDS, EQL ,HOME, , , ,BSLS,
|
||||
//|----+----+----+----+----+----+----. ,----|----+----+----+----+----+----|
|
||||
MUTE,MSTP,MPLY,VOLD,PGDN,MINS, , ,PLUS,END , , , , ,
|
||||
//`----+----+----+--+-+----+----+----/ \----+----+----+----+----+----+----'
|
||||
, , , , ,
|
||||
// `----+----+----' `----+----+----'
|
||||
),
|
||||
|
||||
[_ADJUST] = KEYMAP(
|
||||
//,--------+--------+--------+--------+--------+--------. ,--------+--------+--------+--------+--------+--------.
|
||||
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
|
||||
//|--------+--------+--------+--------+--------+--------| |--------+--------+--------+--------+--------+--------|
|
||||
RGB_TOG, RGB_MOD, RGB_HUI, RGB_SAI, RGB_VAI, _______, _______, _______, _______, _______, _______, _______,
|
||||
//|--------+--------+--------+--------+--------+--------| |--------+--------+--------+--------+--------+--------|
|
||||
RESET , DEBUG , RGB_HUD, RGB_SAD, RGB_VAD, _______, _______, _______, _______, _______, _______, _______,
|
||||
//|--------+--------+--------+--------+--------+--------+--------. ,--------|--------+--------+--------+--------+--------+--------|
|
||||
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
|
||||
//`--------+--------+--------+----+---+--------+--------+--------/ \--------+--------+--------+---+----+--------+--------+--------'
|
||||
_______, _______, _______, _______, _______, _______
|
||||
// `--------+--------+--------' `--------+--------+--------'
|
||||
)
|
||||
|
||||
};
|
||||
|
||||
#ifdef AUDIO_ENABLE
|
||||
float tone_qwerty[][2] = SONG(QWERTY_SOUND);
|
||||
#endif
|
||||
|
||||
void persistent_default_layer_set(uint16_t default_layer) {
|
||||
eeconfig_update_default_layer(default_layer);
|
||||
default_layer_set(default_layer);
|
||||
}
|
||||
|
||||
bool process_record_user(uint16_t keycode, keyrecord_t *record) {
|
||||
switch (keycode) {
|
||||
case QWERTY:
|
||||
if (record->event.pressed) {
|
||||
#ifdef AUDIO_ENABLE
|
||||
PLAY_SONG(tone_qwerty);
|
||||
#endif
|
||||
persistent_default_layer_set(1UL<<_QWERTY);
|
||||
}
|
||||
return false;
|
||||
break;
|
||||
case LOWER:
|
||||
if (record->event.pressed) {
|
||||
layer_on(_LOWER);
|
||||
update_tri_layer(_LOWER, _RAISE, _ADJUST);
|
||||
} else {
|
||||
layer_off(_LOWER);
|
||||
update_tri_layer(_LOWER, _RAISE, _ADJUST);
|
||||
}
|
||||
return false;
|
||||
break;
|
||||
case RAISE:
|
||||
if (record->event.pressed) {
|
||||
layer_on(_RAISE);
|
||||
update_tri_layer(_LOWER, _RAISE, _ADJUST);
|
||||
} else {
|
||||
layer_off(_RAISE);
|
||||
update_tri_layer(_LOWER, _RAISE, _ADJUST);
|
||||
}
|
||||
return false;
|
||||
break;
|
||||
case ADJUST:
|
||||
if (record->event.pressed) {
|
||||
layer_on(_ADJUST);
|
||||
} else {
|
||||
layer_off(_ADJUST);
|
||||
}
|
||||
return false;
|
||||
break;
|
||||
}
|
||||
return true;
|
||||
}
|
||||
17
keyboards/iris/keymaps/yanfali/readme.md
Normal file
17
keyboards/iris/keymaps/yanfali/readme.md
Normal file
@ -0,0 +1,17 @@
|
||||
## u/yanfali keymap for Iris
|
||||
|
||||
Based heavily off Hexwire's configuration. Differs in following ways:
|
||||
|
||||
1. Moved LALT to LCTL; I don't need CTL because of ESCC.
|
||||
1. Moved RAISE to old LALT.
|
||||
1. Moved ENTER to old RAISE.
|
||||
1. Move QUOTE to old ENTER.
|
||||
1. Moved PLUS to old QUOTE.
|
||||
1. replaced music next and volume up with browser forward and back
|
||||
through history
|
||||
|
||||
This configuration lets me use my thumbs for enter and backspace.
|
||||
It turns out I need `+` a lot for programming so I moved it logically
|
||||
below `-`. I also added a couple of web specific short cuts for
|
||||
navigating previous and next in web history on OSX Chrome.
|
||||
|
||||
@ -1,4 +1,5 @@
|
||||
RGBLIGHT_ENABLE = yes
|
||||
BACKLIGHT_ENABLE = yes
|
||||
|
||||
ifndef QUANTUM_DIR
|
||||
include ../../../../Makefile
|
||||
@ -1,7 +1,8 @@
|
||||
JC65
|
||||
===
|
||||
|
||||
|
||||
|
||||
|
||||
|
||||
The JC65 PCB actually has two revisions: A QMK native version, and a PS2AVRGB version. Jchan offered both PCBs as options during the M65-A Round 1 group buy and are now currently available on [keyclack.com](https://keyclack.com/)
|
||||
|
||||
@ -11,4 +12,4 @@ Make example native QMK version (after setting up your build environment):
|
||||
|
||||
Make example ps2avrGB version (after setting up your build environment):
|
||||
|
||||
make jc65/v32a:default
|
||||
make jc65/v32a:default
|
||||
|
||||
@ -9,11 +9,14 @@
|
||||
// Define Macros
|
||||
#define M_PRTS M(0)
|
||||
#define M_PRTA M(1)
|
||||
#define M_MSSN M(2)
|
||||
#define M_APPS M(3)
|
||||
#define M_SPOT M(4)
|
||||
#define M_LEFT M(5)
|
||||
#define M_RGHT M(6)
|
||||
#define M_PRTSC M(2)
|
||||
#define M_PRTAC M(3)
|
||||
#define M_MSSN M(4)
|
||||
#define M_APPS M(5)
|
||||
#define M_SPOT M(6)
|
||||
#define M_LEFT M(7)
|
||||
#define M_RGHT M(8)
|
||||
#define RGB_WHT M(9)
|
||||
|
||||
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
|
||||
// Base Layer
|
||||
@ -35,15 +38,15 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
|
||||
// Mac Layer
|
||||
[_MAC] = KEYMAP(
|
||||
TO(0), KC_F14, KC_F15, M_APPS, M_MSSN, KC_F11, KC_F12,KC_MRWD,KC_MPLY,KC_MFFD,KC_MUTE,KC_VOLD,KC_VOLU,KC_EJCT, KC_NO, KC_NO,
|
||||
KC_TRNS, M_PRTS, M_PRTA,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, KC_TRNS,KC_TRNS,
|
||||
KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, KC_TRNS,KC_TRNS,
|
||||
KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, TO(0), M_MSSN,KC_TRNS,
|
||||
KC_TRNS,KC_TRNS,KC_TRNS, M_SPOT, M_SPOT, M_SPOT, KC_TRNS,KC_TRNS,KC_TRNS, M_LEFT, M_APPS, M_RGHT
|
||||
KC_NO, M_PRTS, M_PRTA, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_BSPC, KC_NO,
|
||||
KC_NO,M_PRTSC,M_PRTAC, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_ENT, KC_NO,
|
||||
KC_NO, KC_NO, KC_NO, KC_X, KC_C, KC_V, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, TO(0), M_MSSN, KC_NO,
|
||||
KC_NO, KC_NO,KC_LGUI, M_SPOT, M_SPOT, M_SPOT, KC_RGUI, KC_NO, KC_NO, M_LEFT, M_APPS, M_RGHT
|
||||
),
|
||||
// RGB and BL Layer
|
||||
[_RGB] = KEYMAP(
|
||||
TO(0), KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, TO(0),
|
||||
KC_NO,RGB_HUD,RGB_HUI, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO,BL_TOGG,
|
||||
KC_NO,RGB_HUD,RGB_HUI,RGB_WHT, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO,BL_TOGG,
|
||||
KC_NO,RGB_SAD,RGB_SAI, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO,RGB_TOG,
|
||||
KC_NO, KC_NO,RGB_VAD,RGB_VAI, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO,RGB_MOD,RGB_RMOD, KC_NO,RGB_M_P,RGB_M_R,
|
||||
KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO,RGB_M_G,RGB_M_SW
|
||||
@ -55,25 +58,25 @@ const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) {
|
||||
if (record->event.pressed) {
|
||||
switch(id) {
|
||||
case 0:
|
||||
return MACRO(D(LGUI), D(LSFT), T(3), U(LSFT), U(LGUI), END); //Mac print screen
|
||||
break;
|
||||
return MACRO(D(LGUI), D(LSFT), T(3), U(LSFT), U(LGUI), END); // Mac print screen
|
||||
case 1:
|
||||
return MACRO(D(LGUI), D(LSFT), T(4), U(LSFT), U(LGUI), END); //Mac print area
|
||||
break;
|
||||
return MACRO(D(LGUI), D(LSFT), T(4), U(LSFT), U(LGUI), END); // Mac print area
|
||||
case 2:
|
||||
return MACRO(D(LCTL), T(UP), U(LCTL), END); //Mac mission control
|
||||
break;
|
||||
return MACRO(D(LCTL), D(LSFT), D(LGUI), T(3), D(LCTL), D(LSFT), D(LGUI), END); // Mac print screen to clipboard
|
||||
case 3:
|
||||
return MACRO(D(LCTL), T(DOWN), U(LCTL), END); //Mac applications
|
||||
break;
|
||||
return MACRO(D(LCTL), D(LSFT), D(LGUI), T(4), D(LCTL), D(LSFT), D(LGUI), END); // Mac print area to clipboard
|
||||
case 4:
|
||||
return MACRO(D(LGUI), T(SPC), U(LGUI), END); //Mac spotlight search
|
||||
break;
|
||||
return MACRO(D(LCTL), T(UP), U(LCTL), END); // Mac mission control
|
||||
case 5:
|
||||
return MACRO(D(LCTL), T(LEFT), U(LCTL), END); //Mac mission left
|
||||
break;
|
||||
return MACRO(D(LCTL), T(DOWN), U(LCTL), END); // Mac app windows
|
||||
case 6:
|
||||
return MACRO(D(LGUI), T(RGHT), U(LGUI), END); //Mac mission right
|
||||
return MACRO(D(LGUI), T(SPC), U(LGUI), END); // Mac spotlight search
|
||||
case 7:
|
||||
return MACRO(D(LCTL), T(LEFT), U(LCTL), END); // Mac mission left
|
||||
case 8:
|
||||
return MACRO(D(LCTL), T(RGHT), U(LCTL), END); // Mac mission right
|
||||
case 9:
|
||||
rgblight_setrgb(0xff, 0xff, 0xff); // White rgb shortcut
|
||||
break;
|
||||
}
|
||||
}
|
||||
|
||||
@ -1,6 +1,8 @@
|
||||
JC65 ps2avrGB
|
||||
=======
|
||||
|
||||
|
||||
|
||||
A 65% keyboard with RGB
|
||||
|
||||
Keyboard Maintainer: [Jason Barnachea](https://github.com/nautxx)
|
||||
|
||||
93
keyboards/jc65/v32u4/keymaps/naut/keymap.c
Normal file
93
keyboards/jc65/v32u4/keymaps/naut/keymap.c
Normal file
@ -0,0 +1,93 @@
|
||||
#include "v32u4.h"
|
||||
|
||||
// Define Layers
|
||||
#define _BASE 0
|
||||
#define _FNX 1
|
||||
#define _MAC 2
|
||||
#define _RGB 3
|
||||
#define _OFF 4
|
||||
|
||||
// Define Macros
|
||||
#define M_PRTS M(0)
|
||||
#define M_PRTA M(1)
|
||||
#define M_PRTSC M(2)
|
||||
#define M_PRTAC M(3)
|
||||
#define M_MSSN M(4)
|
||||
#define M_APPS M(5)
|
||||
#define M_SPOT M(6)
|
||||
#define M_LEFT M(7)
|
||||
#define M_RGHT M(8)
|
||||
#define RGB_WHT M(9)
|
||||
|
||||
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
|
||||
// Base Layer
|
||||
[_BASE] = KEYMAP(
|
||||
KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0,KC_MINS, KC_EQL,KC_BSLS, KC_GRV, KC_INS,
|
||||
KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P,KC_LBRC,KC_RBRC, KC_BSPC, KC_DEL,
|
||||
KC_LCTL, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L,KC_SCLN,KC_QUOT, KC_ENT,KC_PGUP,
|
||||
KC_LSFT, KC_NO, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M,KC_COMM, KC_DOT,KC_SLSH, KC_RSFT, KC_UP,KC_PGDN,
|
||||
MO(1),KC_LALT,KC_LGUI, KC_SPC, KC_SPC, KC_SPC, KC_RGUI, KC_NO,KC_RALT,KC_LEFT,KC_DOWN,KC_RGHT
|
||||
),
|
||||
// Fn Layer
|
||||
[_FNX] = KEYMAP(
|
||||
KC_TRNS, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12,KC_TRNS, TG(4), TG(3),
|
||||
KC_CAPS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, KC_TRNS,KC_TRNS,
|
||||
KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, KC_TRNS,KC_TRNS,
|
||||
KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, TG(2),KC_VOLU,KC_MPLY,
|
||||
KC_TRNS,KC_TRNS,KC_TRNS, KC_TRNS,KC_TRNS,KC_TRNS, KC_TRNS,KC_TRNS,KC_TRNS,KC_MRWD,KC_VOLD,KC_MFFD
|
||||
),
|
||||
// Mac Layer
|
||||
[_MAC] = KEYMAP(
|
||||
TO(0), KC_F14, KC_F15, M_APPS, M_MSSN, KC_F11, KC_F12,KC_MRWD,KC_MPLY,KC_MFFD,KC_MUTE,KC_VOLD,KC_VOLU,KC_EJCT, KC_NO, KC_NO,
|
||||
KC_NO, M_PRTS, M_PRTA, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_BSPC, KC_NO,
|
||||
KC_NO,M_PRTSC,M_PRTAC, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_ENT, KC_NO,
|
||||
KC_NO, KC_NO, KC_NO, KC_X, KC_C, KC_V, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, TO(0), M_MSSN, KC_NO,
|
||||
KC_NO, KC_NO,KC_LGUI, M_SPOT, M_SPOT, M_SPOT, KC_RGUI, KC_NO, KC_NO, M_LEFT, M_APPS, M_RGHT
|
||||
),
|
||||
// RGB and BL Layer
|
||||
[_RGB] = KEYMAP(
|
||||
TO(0), KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, TO(0),
|
||||
KC_NO,RGB_HUD,RGB_HUI,RGB_WHT, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO,BL_TOGG,
|
||||
KC_NO,RGB_SAD,RGB_SAI, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO,RGB_TOG,
|
||||
KC_NO, KC_NO,RGB_VAD,RGB_VAI, BL_DEC, BL_INC, KC_NO, KC_NO, KC_NO, KC_NO,RGB_MOD,RGB_RMOD, KC_NO,RGB_M_P,RGB_M_R,
|
||||
KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO,RGB_M_G,RGB_M_SW
|
||||
),
|
||||
// Mash Layer
|
||||
[_OFF] = KEYMAP(
|
||||
TO(0), KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO,
|
||||
KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO,
|
||||
KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO,
|
||||
KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO,
|
||||
RESET, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO
|
||||
),
|
||||
};
|
||||
|
||||
// The Macros
|
||||
const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) {
|
||||
if (record->event.pressed) {
|
||||
switch(id) {
|
||||
case 0:
|
||||
return MACRO(D(LGUI), D(LSFT), T(3), U(LSFT), U(LGUI), END); // Mac print screen
|
||||
case 1:
|
||||
return MACRO(D(LGUI), D(LSFT), T(4), U(LSFT), U(LGUI), END); // Mac print area
|
||||
case 2:
|
||||
return MACRO(D(LCTL), D(LSFT), D(LGUI), T(3), D(LCTL), D(LSFT), D(LGUI), END); // Mac print screen to clipboard
|
||||
case 3:
|
||||
return MACRO(D(LCTL), D(LSFT), D(LGUI), T(4), D(LCTL), D(LSFT), D(LGUI), END); // Mac print area to clipboard
|
||||
case 4:
|
||||
return MACRO(D(LCTL), T(UP), U(LCTL), END); // Mac mission control
|
||||
case 5:
|
||||
return MACRO(D(LCTL), T(DOWN), U(LCTL), END); // Mac app windows
|
||||
case 6:
|
||||
return MACRO(D(LGUI), T(SPC), U(LGUI), END); // Mac spotlight search
|
||||
case 7:
|
||||
return MACRO(D(LCTL), T(LEFT), U(LCTL), END); // Mac mission left
|
||||
case 8:
|
||||
return MACRO(D(LCTL), T(RGHT), U(LCTL), END); // Mac mission right
|
||||
case 9:
|
||||
rgblight_setrgb(0xff, 0xff, 0xff); // White rgb shortcut
|
||||
break;
|
||||
}
|
||||
}
|
||||
return MACRO_NONE;
|
||||
};
|
||||
18
keyboards/jc65/v32u4/keymaps/naut/readme.md
Normal file
18
keyboards/jc65/v32u4/keymaps/naut/readme.md
Normal file
@ -0,0 +1,18 @@
|
||||
Naut's Keymap
|
||||
=======
|
||||
|
||||
Layer 1: HHKB Split backspace, 6.25u space, control on caps, Fn on L-Ctl.
|
||||
|
||||
Layer 2: F Row on numrow, caps on tab, media shortcuts on arrows
|
||||
|
||||
Layer 3: Mac Media buttons on numrow
|
||||
|
||||
Layer 4: RGB control
|
||||
|
||||
Layer 5: Keyboard off (for mashing purposes and reset)
|
||||
|
||||
Keymap Maintainer: [Jason Barnachea](https://github.com/nautxx)
|
||||
|
||||
Difference from base layout: HHKBish layout. HHKB Fn layer. Mac media layer. RGB control layer. Button mashing layer.
|
||||
|
||||
Intended usage: Daily driver for keyboard peacocking.
|
||||
2
keyboards/jc65/v32u4/keymaps/naut/rules.mk
Normal file
2
keyboards/jc65/v32u4/keymaps/naut/rules.mk
Normal file
@ -0,0 +1,2 @@
|
||||
RGBLIGHT_ENABLE = yes
|
||||
BACKLIGHT_ENABLE = yes
|
||||
@ -1,7 +1,7 @@
|
||||
JC65
|
||||
===
|
||||
|
||||
|
||||
|
||||
|
||||
The JC65 PCB actually has two revisions: A QMK native version, and a PS2AVRGB version. Jchan offered both PCBs as options during the M65-A Round 1 group buy, and were also available choices for the 65% acrylic case group buy. In the near future both PCB versions should be available from keyclack.com when the storefront part opens.
|
||||
|
||||
|
||||
@ -45,7 +45,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
|
||||
KC_ESC, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_BSPC, \
|
||||
KC_TAB, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, \
|
||||
KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_ENT , \
|
||||
KC_LCTRL,KC_LGUI, KC_LALT, ADJUST, LOWER, KC_SPC, KC_SPC, RAISE, KC_LEFT, KC_DOWN, KC_UP, KC_RGHT \
|
||||
KC_LCTRL,KC_LGUI, KC_LALT, ADJUST, LOWER, KC_SPC, KC_SPC, RAISE, KC_LEFT, KC_DOWN, KC_UP, KC_RGHT \
|
||||
),
|
||||
|
||||
/* Colemak
|
||||
@ -88,9 +88,9 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
|
||||
* ,-----------------------------------------------------------------------------------.
|
||||
* | ~ | ! | @ | # | $ | % | ^ | & | * | ( | ) | Del |
|
||||
* |------+------+------+------+------+-------------+------+------+------+------+------|
|
||||
* | Del | F1 | F2 | F3 | F4 | F5 | F6 | _ | + | | \ | | |
|
||||
* | Del | F1 | F2 | F3 | F4 | F5 | F6 | _ | + | { | } | | |
|
||||
* |------+------+------+------+------+------|------+------+------+------+------+------|
|
||||
* | | F7 | F8 | F9 | F10 | F11 | F12 |ISO ~ |ISO | | | |Enter |
|
||||
* | | F7 | F8 | F9 | F10 | F11 | F12 |ISO ~ |ISO | | | | |
|
||||
* |------+------+------+------+------+------+------+------+------+------+------+------|
|
||||
* | | | | | | | | Next | Vol- | Vol+ | Play |
|
||||
* `-----------------------------------------------------------------------------------'
|
||||
@ -108,7 +108,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
|
||||
* |------+------+------+------+------+-------------+------+------+------+------+------|
|
||||
* | Del | F1 | F2 | F3 | F4 | F5 | F6 | - | = | [ | ] | \ |
|
||||
* |------+------+------+------+------+------|------+------+------+------+------+------|
|
||||
* | | F7 | F8 | F9 | F10 | F11 | F12 |ISO # |ISO / | | |Enter |
|
||||
* | | F7 | F8 | F9 | F10 | F11 | F12 |ISO # |ISO / | | | |
|
||||
* |------+------+------+------+------+------+------+------+------+------+------+------|
|
||||
* | | | | | | | | Next | Vol- | Vol+ | Play |
|
||||
* `-----------------------------------------------------------------------------------'
|
||||
@ -211,4 +211,4 @@ bool process_record_user(uint16_t keycode, keyrecord_t *record) {
|
||||
break;
|
||||
}
|
||||
return true;
|
||||
}
|
||||
}
|
||||
|
||||
@ -1,26 +0,0 @@
|
||||
#ifndef CONFIG_USER_H
|
||||
#define CONFIG_USER_H
|
||||
|
||||
#include "../../config.h"
|
||||
|
||||
/* Use I2C or Serial, not both */
|
||||
|
||||
#define USE_SERIAL
|
||||
// #define USE_I2C
|
||||
|
||||
/* Select hand configuration */
|
||||
|
||||
#define MASTER_LEFT
|
||||
// #define MASTER_RIGHT
|
||||
// #define EE_HANDS
|
||||
|
||||
#define TAPPING_TERM 150
|
||||
|
||||
#undef RGBLED_NUM
|
||||
#define RGBLIGHT_ANIMATIONS
|
||||
#define RGBLED_NUM 8
|
||||
#define RGBLIGHT_HUE_STEP 8
|
||||
#define RGBLIGHT_SAT_STEP 8
|
||||
#define RGBLIGHT_VAL_STEP 8
|
||||
|
||||
#endif
|
||||
@ -1,5 +0,0 @@
|
||||
RGBLIGHT_ENABLE = yes
|
||||
|
||||
ifndef QUANTUM_DIR
|
||||
include ../../../../Makefile
|
||||
endif
|
||||
@ -1,108 +0,0 @@
|
||||
Hexwire's Let's Split Layout
|
||||
============================
|
||||
|
||||
### Changes from default layout
|
||||
|
||||
- Main layer
|
||||
- The right space bar key has been changed to backspace, as I only hit space with my left thumb
|
||||
- Backtick is at the lower right and also serves goes to the 3rd function layer when held
|
||||
- Enter key acts as shift when held
|
||||
- Escape key acts as control when held
|
||||
- Minus key at upper right
|
||||
- Lower layer
|
||||
- Numbers are on the lower layer, to make it easier to use a numpad on the right hand
|
||||
- Arrow keys
|
||||
- Straight and curly brackets in the middle two columns
|
||||
- Screenshot keys for MacOS
|
||||
- Upper layer
|
||||
- Symbols are on the upper layer
|
||||
- Media keys
|
||||
- Page Up/Down, Home/End
|
||||
- 3rd function layer
|
||||
- Function keys
|
||||
|
||||
## Layouts
|
||||
|
||||
### Qwerty
|
||||
|
||||
```
|
||||
,----+----+----+----+----+----. ,----+----+----+----+----+----.
|
||||
TAB , Q , W , E , R , T , Y , U , I , O , P ,MINS,
|
||||
|----+----+----+----+----+----| |----+----+----+----+----+----|
|
||||
X0 , A , S , D , F , G , H , J , K , L ,SCLN,QUOT,
|
||||
|----+----+----+----+----+----| |----+----+----+----+----+----|
|
||||
LSFT, Z , X , C , V , B , N , M ,COMM,DOT ,SLSH, X4 ,
|
||||
|----+----+----+----+----+----| |----+----+----+----+----+----|
|
||||
X3 ,LCTL,LALT,LGUI, X1 ,SPC , BSPC, X2 ,LEFT,DOWN, UP ,RGHT
|
||||
`----+----+----+----+----+----' `----+----+----+----+----+----'
|
||||
```
|
||||
|
||||
### Colemak
|
||||
|
||||
```
|
||||
,----+----+----+----+----+----. ,----+----+----+----+----+----.
|
||||
TAB , Q , W , F , P , G , J , L , U , Y ,SCLN,MINS,
|
||||
|----+----+----+----+----+----| |----+----+----+----+----+----|
|
||||
X0 , A , R , S , T , D , H , N , E , I , O ,QUOT,
|
||||
|----+----+----+----+----+----| |----+----+----+----+----+----|
|
||||
LSFT, Z , X , C , V , B , K , M ,COMM,DOT ,SLSH, X4 ,
|
||||
|----+----+----+----+----+----| |----+----+----+----+----+----|
|
||||
X3 ,LCTL,LALT,LGUI, X1 ,SPC , BSPC, X2 ,LEFT,DOWN, UP ,RGHT
|
||||
`----+----+----+----+----+----' `----+----+----+----+----+----'
|
||||
```
|
||||
|
||||
### Dvorak
|
||||
|
||||
```
|
||||
,----+----+----+----+----+----. ,----+----+----+----+----+----.
|
||||
TAB ,QUOT,COMM,DOT , P , Y , F , G , C , R , L ,MINS,
|
||||
|----+----+----+----+----+----| |----+----+----+----+----+----|
|
||||
X0 , A , O , E , U , I , D , H , R , N , S ,SLSH,
|
||||
|----+----+----+----+----+----| |----+----+----+----+----+----|
|
||||
LSFT,SCLN, Q , J , K , X , B , M , W , V , Z , X4 ,
|
||||
|----+----+----+----+----+----| |----+----+----+----+----+----|
|
||||
X3 ,LCTL,LALT,LGUI, X1 ,SPC , BSPC, X2 ,LEFT,DOWN, UP ,RGHT
|
||||
`----+----+----+----+----+----' `----+----+----+----+----+----'
|
||||
```
|
||||
|
||||
### Lower
|
||||
|
||||
```
|
||||
,----+----+----+----+----+----. ,----+----+----+----+----+----.
|
||||
, 1 , 2 , 3 , 4 , 5 , 6 , 7 , 8 , 9 , 0 , ,
|
||||
|----+----+----+----+----+----| |----+----+----+----+----+----|
|
||||
DEL ,CAPP,LEFT,RGHT, UP ,LBRC, RBRC, P4 , P5 , P6 ,PLUS,PIPE,
|
||||
|----+----+----+----+----+----| |----+----+----+----+----+----|
|
||||
,CPYP, , ,DOWN,LCBR, RCBR, P1 , P2 , P3 ,MINS, ,
|
||||
|----+----+----+----+----+----| |----+----+----+----+----+----|
|
||||
, , , , , , DEL , , P0 ,PDOT, ,
|
||||
`----+----+----+----+----+----' `----+----+----+----+----+----'
|
||||
```
|
||||
|
||||
### Raise
|
||||
|
||||
```
|
||||
,----+----+----+----+----+----. ,----+----+----+----+----+----.
|
||||
,EXLM, AT ,HASH,DLR ,PERC, CIRC,AMPR,ASTR,LPRN,RPRN, ,
|
||||
|----+----+----+----+----+----| |----+----+----+----+----+----|
|
||||
DEL ,MPRV,MNXT,VOLU,PGUP,UNDS, EQL ,HOME, , , ,BSLS,
|
||||
|----+----+----+----+----+----| |----+----+----+----+----+----|
|
||||
MUTE,MSTP,MPLY,VOLD,PGDN,MINS, PLUS,END , , , , ,
|
||||
|----+----+----+----+----+----| |----+----+----+----+----+----|
|
||||
, , , , , , , , , , ,
|
||||
`----+----+----+----+----+----' `----+----+----+----+----+----'
|
||||
```
|
||||
|
||||
### 3rd function layer
|
||||
|
||||
```
|
||||
,----+----+----+----+----+----. ,----+----+----+----+----+----.
|
||||
F12 , F1 , F2 , F3 , F4 , F5 , F6 , F7 , F8 , F9 ,F10 ,F11 ,
|
||||
|----+----+----+----+----+----| |----+----+----+----+----+----|
|
||||
, , , , , , , , , , , ,
|
||||
|----+----+----+----+----+----| |----+----+----+----+----+----|
|
||||
, , , , , , , , , , , ,
|
||||
|----+----+----+----+----+----| |----+----+----+----+----+----|
|
||||
, , , , , , , , , , ,
|
||||
`----+----+----+----+----+----' `----+----+----+----+----+----'
|
||||
```
|
||||
@ -1,206 +0,0 @@
|
||||
#include "levinson.h"
|
||||
#include "action_layer.h"
|
||||
#include "eeconfig.h"
|
||||
|
||||
extern keymap_config_t keymap_config;
|
||||
|
||||
#define _QWERTY 0
|
||||
#define _COLEMAK 1
|
||||
#define _DVORAK 2
|
||||
#define _LOWER 3
|
||||
#define _RAISE 4
|
||||
#define _FN3 5
|
||||
#define _FN4 6
|
||||
#define _ADJUST 16
|
||||
|
||||
enum custom_keycodes {
|
||||
QWERTY = SAFE_RANGE,
|
||||
COLEMAK,
|
||||
DVORAK,
|
||||
LOWER,
|
||||
RAISE,
|
||||
FN3,
|
||||
FN4,
|
||||
ADJUST,
|
||||
};
|
||||
|
||||
#define KC_ KC_TRNS
|
||||
#define _______ KC_TRNS
|
||||
|
||||
#define KC_CAPW LGUI(LSFT(KC_3)) // Capture whole screen
|
||||
#define KC_CPYW LGUI(LSFT(LCTL(KC_3))) // Copy whole screen
|
||||
#define KC_CAPP LGUI(LSFT(KC_4)) // Capture portion of screen
|
||||
#define KC_CPYP LGUI(LSFT(LCTL(KC_4))) // Copy portion of screen
|
||||
#define KC_X0 MT(MOD_LCTL, KC_ESC)
|
||||
#define KC_X1 LOWER
|
||||
#define KC_X2 RAISE
|
||||
#define KC_X3 LT(_FN3, KC_GRV)
|
||||
#define KC_X4 MT(MOD_LSFT, KC_ENT)
|
||||
#define KC_X5 BL_STEP
|
||||
|
||||
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
|
||||
|
||||
[_QWERTY] = KC_KEYMAP(
|
||||
//,----+----+----+----+----+----. ,----+----+----+----+----+----.
|
||||
TAB , Q , W , E , R , T , Y , U , I , O , P ,MINS,
|
||||
//|----+----+----+----+----+----| |----+----+----+----+----+----|
|
||||
X0 , A , S , D , F , G , H , J , K , L ,SCLN,QUOT,
|
||||
//|----+----+----+----+----+----| |----+----+----+----+----+----|
|
||||
LSFT, Z , X , C , V , B , N , M ,COMM,DOT ,SLSH, X4 ,
|
||||
//|----+----+----+----+----+----| |----+----+----+----+----+----|
|
||||
X5 ,LCTL,LALT,LGUI, X1 ,SPC , BSPC, X2 ,LEFT,DOWN, UP ,RGHT
|
||||
//`----+----+----+----+----+----' `----+----+----+----+----+----'
|
||||
),
|
||||
|
||||
[_COLEMAK] = KC_KEYMAP(
|
||||
//,----+----+----+----+----+----. ,----+----+----+----+----+----.
|
||||
TAB , Q , W , F , P , G , J , L , U , Y ,SCLN,MINS,
|
||||
//|----+----+----+----+----+----| |----+----+----+----+----+----|
|
||||
X0 , A , R , S , T , D , H , N , E , I , O ,QUOT,
|
||||
//|----+----+----+----+----+----| |----+----+----+----+----+----|
|
||||
LSFT, Z , X , C , V , B , K , M ,COMM,DOT ,SLSH, X4 ,
|
||||
//|----+----+----+----+----+----| |----+----+----+----+----+----|
|
||||
X3 ,LCTL,LALT,LGUI, X1 ,SPC , BSPC, X2 ,LEFT,DOWN, UP ,RGHT
|
||||
//`----+----+----+----+----+----' `----+----+----+----+----+----'
|
||||
),
|
||||
|
||||
[_DVORAK] = KC_KEYMAP(
|
||||
//,----+----+----+----+----+----. ,----+----+----+----+----+----.
|
||||
TAB ,QUOT,COMM,DOT , P , Y , F , G , C , R , L ,MINS,
|
||||
//|----+----+----+----+----+----| |----+----+----+----+----+----|
|
||||
X0 , A , O , E , U , I , D , H , T , N , S ,SLSH,
|
||||
//|----+----+----+----+----+----| |----+----+----+----+----+----|
|
||||
LSFT,SCLN, Q , J , K , X , B , M , W , V , Z , X4 ,
|
||||
//|----+----+----+----+----+----| |----+----+----+----+----+----|
|
||||
X3 ,LCTL,LALT,LGUI, X1 ,SPC , BSPC, X2 ,LEFT,DOWN, UP ,RGHT
|
||||
//`----+----+----+----+----+----' `----+----+----+----+----+----'
|
||||
),
|
||||
|
||||
[_LOWER] = KC_KEYMAP(
|
||||
//,----+----+----+----+----+----. ,----+----+----+----+----+----.
|
||||
, 1 , 2 , 3 , 4 , 5 , 6 , 7 , 8 , 9 , 0 , ,
|
||||
//|----+----+----+----+----+----| |----+----+----+----+----+----|
|
||||
DEL ,CAPP,LEFT,RGHT, UP ,LBRC, RBRC, P4 , P5 , P6 ,PLUS,PIPE,
|
||||
//|----+----+----+----+----+----| |----+----+----+----+----+----|
|
||||
,CPYP, , ,DOWN,LCBR, RCBR, P1 , P2 , P3 ,MINS, ,
|
||||
//|----+----+----+----+----+----| |----+----+----+----+----+----|
|
||||
, , , , , , DEL , , P0 ,PDOT, ,
|
||||
//`----+----+----+----+----+----' `----+----+----+----+----+----'
|
||||
),
|
||||
|
||||
[_RAISE] = KC_KEYMAP(
|
||||
//,----+----+----+----+----+----. ,----+----+----+----+----+----.
|
||||
,EXLM, AT ,HASH,DLR ,PERC, CIRC,AMPR,ASTR,LPRN,RPRN, ,
|
||||
//|----+----+----+----+----+----| |----+----+----+----+----+----|
|
||||
DEL ,MPRV,MNXT,VOLU,PGUP,UNDS, EQL ,HOME, , , ,BSLS,
|
||||
//|----+----+----+----+----+----| |----+----+----+----+----+----|
|
||||
MUTE,MSTP,MPLY,VOLD,PGDN,MINS, PLUS,END , , , , ,
|
||||
//|----+----+----+----+----+----| |----+----+----+----+----+----|
|
||||
, , , , , , , , , , ,
|
||||
//`----+----+----+----+----+----' `----+----+----+----+----+----'
|
||||
),
|
||||
|
||||
[_FN3] = KC_KEYMAP(
|
||||
//,----+----+----+----+----+----. ,----+----+----+----+----+----.
|
||||
F12 , F1 , F2 , F3 , F4 , F5 , F6 , F7 , F8 , F9 ,F10 ,F11 ,
|
||||
//|----+----+----+----+----+----| |----+----+----+----+----+----|
|
||||
, , , , , , , , , , , ,
|
||||
//|----+----+----+----+----+----| |----+----+----+----+----+----|
|
||||
, , , , , , , , , , , ,
|
||||
//|----+----+----+----+----+----| |----+----+----+----+----+----|
|
||||
, , , , , , , , , , ,
|
||||
//`----+----+----+----+----+----' `----+----+----+----+----+----'
|
||||
),
|
||||
|
||||
/* Adjust (Lower + Raise)
|
||||
* ,-----------------------------------------------------------------------------------.
|
||||
* | | Reset|RGB Tg|RGB Md|Hue Up|Hue Dn|Sat Up|Sat Dn|Val Up|Val Dn| | |
|
||||
* |------+------+------+------+------+-------------+------+------+------+------+------|
|
||||
* | | | |Aud on|Audoff|AGnorm|AGswap|Qwerty|Colemk|Dvorak| | |
|
||||
* |------+------+------+------+------+------|------+------+------+------+------+------|
|
||||
* | | | | | | | | | | | | |
|
||||
* |------+------+------+------+------+------+------+------+------+------+------+------|
|
||||
* | | | | | | | | | | | |
|
||||
* `-----------------------------------------------------------------------------------'
|
||||
*/
|
||||
[_ADJUST] = KEYMAP( \
|
||||
_______, RESET , RGB_TOG, RGB_MOD, RGB_HUD, RGB_HUI, RGB_SAD, RGB_SAI, RGB_VAD, RGB_VAI, _______, _______, \
|
||||
_______, _______, _______, AU_ON, AU_OFF, AG_NORM, AG_SWAP, QWERTY, COLEMAK, DVORAK, _______, _______, \
|
||||
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, \
|
||||
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ \
|
||||
)
|
||||
|
||||
|
||||
};
|
||||
|
||||
#ifdef AUDIO_ENABLE
|
||||
float tone_qwerty[][2] = SONG(QWERTY_SOUND);
|
||||
float tone_dvorak[][2] = SONG(DVORAK_SOUND);
|
||||
float tone_colemak[][2] = SONG(COLEMAK_SOUND);
|
||||
#endif
|
||||
|
||||
void persistent_default_layer_set(uint16_t default_layer) {
|
||||
eeconfig_update_default_layer(default_layer);
|
||||
default_layer_set(default_layer);
|
||||
}
|
||||
|
||||
bool process_record_user(uint16_t keycode, keyrecord_t *record) {
|
||||
switch (keycode) {
|
||||
case QWERTY:
|
||||
if (record->event.pressed) {
|
||||
#ifdef AUDIO_ENABLE
|
||||
PLAY_SONG(tone_qwerty);
|
||||
#endif
|
||||
persistent_default_layer_set(1UL<<_QWERTY);
|
||||
}
|
||||
return false;
|
||||
break;
|
||||
case COLEMAK:
|
||||
if (record->event.pressed) {
|
||||
#ifdef AUDIO_ENABLE
|
||||
PLAY_SONG(tone_colemak);
|
||||
#endif
|
||||
persistent_default_layer_set(1UL<<_COLEMAK);
|
||||
}
|
||||
return false;
|
||||
break;
|
||||
case DVORAK:
|
||||
if (record->event.pressed) {
|
||||
#ifdef AUDIO_ENABLE
|
||||
PLAY_SONG(tone_dvorak);
|
||||
#endif
|
||||
persistent_default_layer_set(1UL<<_DVORAK);
|
||||
}
|
||||
return false;
|
||||
break;
|
||||
case LOWER:
|
||||
if (record->event.pressed) {
|
||||
layer_on(_LOWER);
|
||||
update_tri_layer(_LOWER, _RAISE, _ADJUST);
|
||||
} else {
|
||||
layer_off(_LOWER);
|
||||
update_tri_layer(_LOWER, _RAISE, _ADJUST);
|
||||
}
|
||||
return false;
|
||||
break;
|
||||
case RAISE:
|
||||
if (record->event.pressed) {
|
||||
layer_on(_RAISE);
|
||||
update_tri_layer(_LOWER, _RAISE, _ADJUST);
|
||||
} else {
|
||||
layer_off(_RAISE);
|
||||
update_tri_layer(_LOWER, _RAISE, _ADJUST);
|
||||
}
|
||||
return false;
|
||||
break;
|
||||
case ADJUST:
|
||||
if (record->event.pressed) {
|
||||
layer_on(_ADJUST);
|
||||
} else {
|
||||
layer_off(_ADJUST);
|
||||
}
|
||||
return false;
|
||||
break;
|
||||
}
|
||||
return true;
|
||||
}
|
||||
@ -131,3 +131,45 @@ const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) {
|
||||
return MACRO_NONE;
|
||||
}
|
||||
|
||||
#ifdef RGBLIGHT_ENABLE
|
||||
bool rgb_layer_change = true;
|
||||
#endif
|
||||
|
||||
#define rgblight_set_blue rgblight_sethsv (0xFF, 0xFF, 0xFF);
|
||||
#define rgblight_set_red rgblight_sethsv (0x00, 0xFF, 0xFF);
|
||||
#define rgblight_set_green rgblight_sethsv (0x78, 0xFF, 0xFF);
|
||||
#define rgblight_set_orange rgblight_sethsv (0x1E, 0xFF, 0xFF);
|
||||
#define rgblight_set_teal rgblight_sethsv (0xC3, 0xFF, 0xFF);
|
||||
#define rgblight_set_magenta rgblight_sethsv (0x12C, 0xFF, 0xFF);
|
||||
#define rgblight_set_yellow rgblight_sethsv (0x3C, 0xFF, 0xFF);
|
||||
#define rgblight_set_purple rgblight_sethsv (0x10E, 0xFF, 0xFF);
|
||||
#define rgblight_set_white rgblight_sethsv (0x00, 0x00, 0xFF);
|
||||
#define rgblight_set_black rgblight_sethsv (0x00, 0x00, 0x00);
|
||||
|
||||
uint32_t layer_state_set_user(uint32_t state) {
|
||||
#ifdef RGBLIGHT_ENABLE
|
||||
uint8_t default_layer = eeconfig_read_default_layer();
|
||||
if (rgb_layer_change) {
|
||||
switch (biton32(state)) {
|
||||
case _LOWER:
|
||||
rgblight_set_purple;
|
||||
rgblight_mode(5);
|
||||
break;
|
||||
case _VIM:
|
||||
rgblight_set_green;
|
||||
rgblight_mode(23);
|
||||
break;
|
||||
case _GAME:
|
||||
rgblight_mode(8);
|
||||
break;
|
||||
default:
|
||||
if (default_layer & (1UL << _GAME)) {
|
||||
}
|
||||
else
|
||||
rgblight_mode(14);
|
||||
break;
|
||||
}
|
||||
}
|
||||
#endif
|
||||
return state;
|
||||
}
|
||||
|
||||
@ -2,11 +2,7 @@
|
||||
#define SPLIT_KEYBOARD_UTIL_H
|
||||
|
||||
#include <stdbool.h>
|
||||
|
||||
#ifdef EE_HANDS
|
||||
#define EECONFIG_BOOTMAGIC_END (uint8_t *)10
|
||||
#define EECONFIG_HANDEDNESS EECONFIG_BOOTMAGIC_END
|
||||
#endif
|
||||
#include "eeconfig.h"
|
||||
|
||||
#define SLAVE_I2C_ADDRESS 0x32
|
||||
|
||||
|
||||
@ -2,11 +2,8 @@
|
||||
#define SPLIT_KEYBOARD_UTIL_H
|
||||
|
||||
#include <stdbool.h>
|
||||
#include "eeconfig.h"
|
||||
|
||||
#ifdef EE_HANDS
|
||||
#define EECONFIG_BOOTMAGIC_END (uint8_t *)10
|
||||
#define EECONFIG_HANDEDNESS EECONFIG_BOOTMAGIC_END
|
||||
#endif
|
||||
|
||||
#define SLAVE_I2C_ADDRESS 0x32
|
||||
|
||||
|
||||
@ -29,7 +29,22 @@
|
||||
{ k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b } \
|
||||
}
|
||||
|
||||
// Used to create a keymap using only KC_ prefixed keys
|
||||
#define KC_KEYMAP( \
|
||||
k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, \
|
||||
k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, \
|
||||
k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, \
|
||||
k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b \
|
||||
) \
|
||||
LAYOUT_planck_grid( \
|
||||
KC_##k00, KC_##k01, KC_##k02, KC_##k03, KC_##k04, KC_##k05, KC_##k06, KC_##k07, KC_##k08, KC_##k09, KC_##k0a, KC_##k0b, \
|
||||
KC_##k10, KC_##k11, KC_##k12, KC_##k13, KC_##k14, KC_##k15, KC_##k16, KC_##k17, KC_##k18, KC_##k19, KC_##k1a, KC_##k1b, \
|
||||
KC_##k20, KC_##k21, KC_##k22, KC_##k23, KC_##k24, KC_##k25, KC_##k26, KC_##k27, KC_##k28, KC_##k29, KC_##k2a, KC_##k2b, \
|
||||
KC_##k30, KC_##k31, KC_##k32, KC_##k33, KC_##k34, KC_##k35, KC_##k36, KC_##k37, KC_##k38, KC_##k39, KC_##k3a, KC_##k3b \
|
||||
)
|
||||
|
||||
#define KEYMAP LAYOUT_planck_grid
|
||||
#define LAYOUT_ortho_4x12 LAYOUT_planck_grid
|
||||
#define KC_LAYOUT_ortho_4x12 KC_KEYMAP
|
||||
|
||||
#endif
|
||||
|
||||
@ -2,11 +2,8 @@
|
||||
#define SPLIT_KEYBOARD_UTIL_H
|
||||
|
||||
#include <stdbool.h>
|
||||
#include "eeconfig.h"
|
||||
|
||||
#ifdef EE_HANDS
|
||||
#define EECONFIG_BOOTMAGIC_END (uint8_t *)10
|
||||
#define EECONFIG_HANDEDNESS EECONFIG_BOOTMAGIC_END
|
||||
#endif
|
||||
|
||||
#define SLAVE_I2C_ADDRESS 0x32
|
||||
|
||||
|
||||
@ -1,7 +1,7 @@
|
||||
#ifndef CONFIG_USER_H
|
||||
#define CONFIG_USER_H
|
||||
|
||||
#include "../../config.h"
|
||||
#include QMK_KEYBOARD_CONFIG_H
|
||||
|
||||
/* Use I2C or Serial, not both */
|
||||
|
||||
@ -1,4 +1,4 @@
|
||||
#include "lets_split.h"
|
||||
#include QMK_KEYBOARD_H
|
||||
#include "action_layer.h"
|
||||
#include "eeconfig.h"
|
||||
|
||||
@ -9,8 +9,7 @@ extern keymap_config_t keymap_config;
|
||||
#define _DVORAK 2
|
||||
#define _LOWER 3
|
||||
#define _RAISE 4
|
||||
#define _FN3 5
|
||||
#define _FN4 6
|
||||
#define _FKEYS 5
|
||||
#define _ADJUST 16
|
||||
|
||||
enum custom_keycodes {
|
||||
@ -19,8 +18,6 @@ enum custom_keycodes {
|
||||
DVORAK,
|
||||
LOWER,
|
||||
RAISE,
|
||||
FN3,
|
||||
FN4,
|
||||
ADJUST,
|
||||
};
|
||||
|
||||
@ -31,51 +28,52 @@ enum custom_keycodes {
|
||||
#define KC_CPYW LGUI(LSFT(LCTL(KC_3))) // Copy whole screen
|
||||
#define KC_CAPP LGUI(LSFT(KC_4)) // Capture portion of screen
|
||||
#define KC_CPYP LGUI(LSFT(LCTL(KC_4))) // Copy portion of screen
|
||||
#define KC_X0 MT(MOD_LCTL, KC_ESC)
|
||||
#define KC_X1 LOWER
|
||||
#define KC_X2 RAISE
|
||||
#define KC_X3 LT(_FN3, KC_GRV)
|
||||
#define KC_X4 MT(MOD_LSFT, KC_ENT)
|
||||
#define KC_ESCC MT(MOD_LCTL, KC_ESC)
|
||||
#define KC_LOWR LOWER
|
||||
#define KC_RASE RAISE
|
||||
#define KC_GRVF LT(_FKEYS, KC_GRV)
|
||||
#define KC_ENTS MT(MOD_LSFT, KC_ENT)
|
||||
#define KC_BL_S BL_STEP
|
||||
|
||||
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
|
||||
|
||||
[_QWERTY] = KC_KEYMAP(
|
||||
[_QWERTY] = KC_LAYOUT_ortho_4x12(
|
||||
//,----+----+----+----+----+----. ,----+----+----+----+----+----.
|
||||
TAB , Q , W , E , R , T , Y , U , I , O , P ,MINS,
|
||||
//|----+----+----+----+----+----| |----+----+----+----+----+----|
|
||||
X0 , A , S , D , F , G , H , J , K , L ,SCLN,QUOT,
|
||||
ESCC, A , S , D , F , G , H , J , K , L ,SCLN,QUOT,
|
||||
//|----+----+----+----+----+----| |----+----+----+----+----+----|
|
||||
LSFT, Z , X , C , V , B , N , M ,COMM,DOT ,SLSH, X4 ,
|
||||
LSFT, Z , X , C , V , B , N , M ,COMM,DOT ,SLSH,ENTS,
|
||||
//|----+----+----+----+----+----| |----+----+----+----+----+----|
|
||||
X3 ,LCTL,LALT,LGUI, X1 ,SPC , BSPC, X2 ,LEFT,DOWN, UP ,RGHT
|
||||
GRVF,LCTL,LALT,LGUI,LOWR,SPC , BSPC,RASE,LEFT,DOWN, UP ,RGHT
|
||||
//`----+----+----+----+----+----' `----+----+----+----+----+----'
|
||||
),
|
||||
|
||||
[_COLEMAK] = KC_KEYMAP(
|
||||
[_COLEMAK] = KC_LAYOUT_ortho_4x12(
|
||||
//,----+----+----+----+----+----. ,----+----+----+----+----+----.
|
||||
TAB , Q , W , F , P , G , J , L , U , Y ,SCLN,MINS,
|
||||
//|----+----+----+----+----+----| |----+----+----+----+----+----|
|
||||
X0 , A , R , S , T , D , H , N , E , I , O ,QUOT,
|
||||
ESCC, A , R , S , T , D , H , N , E , I , O ,QUOT,
|
||||
//|----+----+----+----+----+----| |----+----+----+----+----+----|
|
||||
LSFT, Z , X , C , V , B , K , M ,COMM,DOT ,SLSH, X4 ,
|
||||
LSFT, Z , X , C , V , B , K , M ,COMM,DOT ,SLSH,ENTS,
|
||||
//|----+----+----+----+----+----| |----+----+----+----+----+----|
|
||||
X3 ,LCTL,LALT,LGUI, X1 ,SPC , BSPC, X2 ,LEFT,DOWN, UP ,RGHT
|
||||
GRVF,LCTL,LALT,LGUI,LOWR,SPC , BSPC,RASE,LEFT,DOWN, UP ,RGHT
|
||||
//`----+----+----+----+----+----' `----+----+----+----+----+----'
|
||||
),
|
||||
|
||||
[_DVORAK] = KC_KEYMAP(
|
||||
[_DVORAK] = KC_LAYOUT_ortho_4x12(
|
||||
//,----+----+----+----+----+----. ,----+----+----+----+----+----.
|
||||
TAB ,QUOT,COMM,DOT , P , Y , F , G , C , R , L ,MINS,
|
||||
//|----+----+----+----+----+----| |----+----+----+----+----+----|
|
||||
X0 , A , O , E , U , I , D , H , T , N , S ,SLSH,
|
||||
ESCC, A , O , E , U , I , D , H , T , N , S ,SLSH,
|
||||
//|----+----+----+----+----+----| |----+----+----+----+----+----|
|
||||
LSFT,SCLN, Q , J , K , X , B , M , W , V , Z , X4 ,
|
||||
LSFT,SCLN, Q , J , K , X , B , M , W , V , Z ,ENTS,
|
||||
//|----+----+----+----+----+----| |----+----+----+----+----+----|
|
||||
X3 ,LCTL,LALT,LGUI, X1 ,SPC , BSPC, X2 ,LEFT,DOWN, UP ,RGHT
|
||||
GRVF,LCTL,LALT,LGUI,LOWR,SPC , BSPC,RASE,LEFT,DOWN, UP ,RGHT
|
||||
//`----+----+----+----+----+----' `----+----+----+----+----+----'
|
||||
),
|
||||
|
||||
[_LOWER] = KC_KEYMAP(
|
||||
[_LOWER] = KC_LAYOUT_ortho_4x12(
|
||||
//,----+----+----+----+----+----. ,----+----+----+----+----+----.
|
||||
, 1 , 2 , 3 , 4 , 5 , 6 , 7 , 8 , 9 , 0 , ,
|
||||
//|----+----+----+----+----+----| |----+----+----+----+----+----|
|
||||
@ -83,11 +81,11 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
|
||||
//|----+----+----+----+----+----| |----+----+----+----+----+----|
|
||||
,CPYP, , ,DOWN,LCBR, RCBR, P1 , P2 , P3 ,MINS, ,
|
||||
//|----+----+----+----+----+----| |----+----+----+----+----+----|
|
||||
, , , , , , DEL , , P0 ,PDOT, ,
|
||||
BL_S, , , , ,DEL , DEL , , P0 ,PDOT, ,
|
||||
//`----+----+----+----+----+----' `----+----+----+----+----+----'
|
||||
),
|
||||
|
||||
[_RAISE] = KC_KEYMAP(
|
||||
[_RAISE] = KC_LAYOUT_ortho_4x12(
|
||||
//,----+----+----+----+----+----. ,----+----+----+----+----+----.
|
||||
,EXLM, AT ,HASH,DLR ,PERC, CIRC,AMPR,ASTR,LPRN,RPRN, ,
|
||||
//|----+----+----+----+----+----| |----+----+----+----+----+----|
|
||||
@ -99,7 +97,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
|
||||
//`----+----+----+----+----+----' `----+----+----+----+----+----'
|
||||
),
|
||||
|
||||
[_FN3] = KC_KEYMAP(
|
||||
[_FKEYS] = KC_LAYOUT_ortho_4x12(
|
||||
//,----+----+----+----+----+----. ,----+----+----+----+----+----.
|
||||
F12 , F1 , F2 , F3 , F4 , F5 , F6 , F7 , F8 , F9 ,F10 ,F11 ,
|
||||
//|----+----+----+----+----+----| |----+----+----+----+----+----|
|
||||
@ -122,7 +120,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
|
||||
* | | | | | | | | | | | |
|
||||
* `-----------------------------------------------------------------------------------'
|
||||
*/
|
||||
[_ADJUST] = KEYMAP( \
|
||||
[_ADJUST] = LAYOUT_ortho_4x12( \
|
||||
_______, RESET , RGB_TOG, RGB_MOD, RGB_HUD, RGB_HUI, RGB_SAD, RGB_SAI, RGB_VAD, RGB_VAI, _______, _______, \
|
||||
_______, _______, _______, AU_ON, AU_OFF, AG_NORM, AG_SWAP, QWERTY, COLEMAK, DVORAK, _______, _______, \
|
||||
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, \
|
||||
@ -1,4 +1,4 @@
|
||||
Hexwire's Let's Split Layout
|
||||
Bakingpy's Let's Split Layout
|
||||
============================
|
||||
|
||||
### Changes from default layout
|
||||
@ -29,11 +29,11 @@ Hexwire's Let's Split Layout
|
||||
,----+----+----+----+----+----. ,----+----+----+----+----+----.
|
||||
TAB , Q , W , E , R , T , Y , U , I , O , P ,MINS,
|
||||
|----+----+----+----+----+----| |----+----+----+----+----+----|
|
||||
X0 , A , S , D , F , G , H , J , K , L ,SCLN,QUOT,
|
||||
ESCC, A , S , D , F , G , H , J , K , L ,SCLN,QUOT,
|
||||
|----+----+----+----+----+----| |----+----+----+----+----+----|
|
||||
LSFT, Z , X , C , V , B , N , M ,COMM,DOT ,SLSH, X4 ,
|
||||
LSFT, Z , X , C , V , B , N , M ,COMM,DOT ,SLSH,ENTS,
|
||||
|----+----+----+----+----+----| |----+----+----+----+----+----|
|
||||
X3 ,LCTL,LALT,LGUI, X1 ,SPC , BSPC, X2 ,LEFT,DOWN, UP ,RGHT
|
||||
GRVF,LCTL,LALT,LGUI,LOWR,SPC , BSPC,RASE,LEFT,DOWN, UP ,RGHT
|
||||
`----+----+----+----+----+----' `----+----+----+----+----+----'
|
||||
```
|
||||
|
||||
@ -43,11 +43,11 @@ Hexwire's Let's Split Layout
|
||||
,----+----+----+----+----+----. ,----+----+----+----+----+----.
|
||||
TAB , Q , W , F , P , G , J , L , U , Y ,SCLN,MINS,
|
||||
|----+----+----+----+----+----| |----+----+----+----+----+----|
|
||||
X0 , A , R , S , T , D , H , N , E , I , O ,QUOT,
|
||||
ESCC, A , R , S , T , D , H , N , E , I , O ,QUOT,
|
||||
|----+----+----+----+----+----| |----+----+----+----+----+----|
|
||||
LSFT, Z , X , C , V , B , K , M ,COMM,DOT ,SLSH, X4 ,
|
||||
LSFT, Z , X , C , V , B , K , M ,COMM,DOT ,SLSH,ENTS,
|
||||
|----+----+----+----+----+----| |----+----+----+----+----+----|
|
||||
X3 ,LCTL,LALT,LGUI, X1 ,SPC , BSPC, X2 ,LEFT,DOWN, UP ,RGHT
|
||||
GRVF,LCTL,LALT,LGUI,LOWR,SPC , BSPC,RASE,LEFT,DOWN, UP ,RGHT
|
||||
`----+----+----+----+----+----' `----+----+----+----+----+----'
|
||||
```
|
||||
|
||||
@ -57,11 +57,11 @@ Hexwire's Let's Split Layout
|
||||
,----+----+----+----+----+----. ,----+----+----+----+----+----.
|
||||
TAB ,QUOT,COMM,DOT , P , Y , F , G , C , R , L ,MINS,
|
||||
|----+----+----+----+----+----| |----+----+----+----+----+----|
|
||||
X0 , A , O , E , U , I , D , H , R , N , S ,SLSH,
|
||||
ESCC, A , O , E , U , I , D , H , R , N , S ,SLSH,
|
||||
|----+----+----+----+----+----| |----+----+----+----+----+----|
|
||||
LSFT,SCLN, Q , J , K , X , B , M , W , V , Z , X4 ,
|
||||
LSFT,SCLN, Q , J , K , X , B , M , W , V , Z ,ENTS,
|
||||
|----+----+----+----+----+----| |----+----+----+----+----+----|
|
||||
X3 ,LCTL,LALT,LGUI, X1 ,SPC , BSPC, X2 ,LEFT,DOWN, UP ,RGHT
|
||||
GRVF,LCTL,LALT,LGUI,LOWR,SPC , BSPC,RASE,LEFT,DOWN, UP ,RGHT
|
||||
`----+----+----+----+----+----' `----+----+----+----+----+----'
|
||||
```
|
||||
|
||||
@ -75,7 +75,7 @@ Hexwire's Let's Split Layout
|
||||
|----+----+----+----+----+----| |----+----+----+----+----+----|
|
||||
,CPYP, , ,DOWN,LCBR, RCBR, P1 , P2 , P3 ,MINS, ,
|
||||
|----+----+----+----+----+----| |----+----+----+----+----+----|
|
||||
, , , , , , DEL , , P0 ,PDOT, ,
|
||||
, , , , ,DEL , DEL , , P0 ,PDOT, ,
|
||||
`----+----+----+----+----+----' `----+----+----+----+----+----'
|
||||
```
|
||||
|
||||
4
layouts/community/ortho_4x12/bakingpy/rules.mk
Normal file
4
layouts/community/ortho_4x12/bakingpy/rules.mk
Normal file
@ -0,0 +1,4 @@
|
||||
# Enable RGB if not a Planck
|
||||
ifeq (,$(findstring planck,$(KEYBOARD)))
|
||||
RGBLIGHT_ENABLE = yes
|
||||
endif
|
||||
Loading…
Reference in New Issue
Block a user