Refactor the crkbd/via keymap and fix OLED bugs (#10354)
* Refactor the crkbd/via keymap and fix OLED bugs * Revert "Refactor the crkbd/via keymap and fix OLED bugs" This reverts commit dc9db029fc6b077fc7600b49e920b755c522d100. * Fix OLED display bugs * Remove unused functions * Remove uncessary the key logger * Add new lines at end of file * Remove unnecesary extern for is_master * Remove extern is_master from rev1.h * Remove ssd1306 from common dir because its the legacy lib * Update default keymap based the via keymap * Remove foostan keymap because it will be legacy * Revert Remove unnecesary extern for is_master * Remove unnecessary backslashes.
This commit is contained in:
parent
88c09aa892
commit
503b762538
@ -28,8 +28,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
// #define MASTER_RIGHT
|
||||
// #define EE_HANDS
|
||||
|
||||
#define SSD1306OLED
|
||||
|
||||
#define USE_SERIAL_PD2
|
||||
|
||||
#define TAPPING_FORCE_HOLD
|
||||
@ -44,3 +42,5 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
#define RGBLIGHT_SAT_STEP 17
|
||||
#define RGBLIGHT_VAL_STEP 17
|
||||
#endif
|
||||
|
||||
#define OLED_FONT_H "keyboards/crkbd/lib/glcdfont.c"
|
@ -18,218 +18,157 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
|
||||
#include QMK_KEYBOARD_H
|
||||
|
||||
|
||||
#ifdef RGBLIGHT_ENABLE
|
||||
//Following line allows macro to read current RGB settings
|
||||
extern rgblight_config_t rgblight_config;
|
||||
#endif
|
||||
|
||||
extern uint8_t is_master;
|
||||
|
||||
// Each layer gets a name for readability, which is then used in the keymap matrix below.
|
||||
// The underscores don't mean anything - you can have a layer called STUFF or any other name.
|
||||
// Layer names don't all need to be of the same length, obviously, and you can also skip them
|
||||
// entirely and just use numbers.
|
||||
#define _QWERTY 0
|
||||
#define _LOWER 1
|
||||
#define _RAISE 2
|
||||
#define _ADJUST 3
|
||||
|
||||
enum custom_keycodes {
|
||||
QWERTY = SAFE_RANGE,
|
||||
LOWER,
|
||||
RAISE,
|
||||
ADJUST,
|
||||
BACKLIT,
|
||||
RGBRST
|
||||
};
|
||||
|
||||
enum macro_keycodes {
|
||||
KC_SAMPLEMACRO,
|
||||
};
|
||||
|
||||
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
|
||||
[_QWERTY] = LAYOUT_split_3x6_3( \
|
||||
[0] = LAYOUT_split_3x6_3(
|
||||
//,-----------------------------------------------------. ,-----------------------------------------------------.
|
||||
KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_BSPC,\
|
||||
KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_BSPC,
|
||||
//|--------+--------+--------+--------+--------+--------| |--------+--------+--------+--------+--------+--------|
|
||||
KC_LCTL, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT,\
|
||||
KC_LCTL, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT,
|
||||
//|--------+--------+--------+--------+--------+--------| |--------+--------+--------+--------+--------+--------|
|
||||
KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT,\
|
||||
KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_ESC,
|
||||
//|--------+--------+--------+--------+--------+--------+--------| |--------+--------+--------+--------+--------+--------+--------|
|
||||
KC_LGUI, LOWER, KC_SPC, KC_ENT, RAISE, KC_RALT \
|
||||
KC_LGUI, MO(1), KC_SPC, KC_ENT, MO(2), KC_RALT
|
||||
//`--------------------------' `--------------------------'
|
||||
|
||||
),
|
||||
|
||||
[_LOWER] = LAYOUT_split_3x6_3( \
|
||||
[1] = LAYOUT_split_3x6_3(
|
||||
//,-----------------------------------------------------. ,-----------------------------------------------------.
|
||||
KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_BSPC,\
|
||||
KC_TAB, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_BSPC,
|
||||
//|--------+--------+--------+--------+--------+--------| |--------+--------+--------+--------+--------+--------|
|
||||
KC_LCTL, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, KC_LEFT, KC_DOWN, KC_UP,KC_RIGHT, XXXXXXX, XXXXXXX,\
|
||||
KC_LCTL, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, KC_LEFT, KC_DOWN, KC_UP,KC_RIGHT, XXXXXXX, XXXXXXX,
|
||||
//|--------+--------+--------+--------+--------+--------| |--------+--------+--------+--------+--------+--------|
|
||||
KC_LSFT, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX,\
|
||||
KC_LSFT, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX,
|
||||
//|--------+--------+--------+--------+--------+--------+--------| |--------+--------+--------+--------+--------+--------+--------|
|
||||
KC_LGUI, LOWER, KC_SPC, KC_ENT, RAISE, KC_RALT \
|
||||
//`--------------------------' `--------------------------'
|
||||
),
|
||||
|
||||
[_RAISE] = LAYOUT_split_3x6_3( \
|
||||
//,-----------------------------------------------------. ,-----------------------------------------------------.
|
||||
KC_ESC, KC_EXLM, KC_AT, KC_HASH, KC_DLR, KC_PERC, KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN, KC_BSPC,\
|
||||
//|--------+--------+--------+--------+--------+--------| |--------+--------+--------+--------+--------+--------|
|
||||
KC_LCTL, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, KC_MINS, KC_EQL, KC_LCBR, KC_RCBR, KC_PIPE, KC_GRV,\
|
||||
//|--------+--------+--------+--------+--------+--------| |--------+--------+--------+--------+--------+--------|
|
||||
KC_LSFT, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, KC_UNDS, KC_PLUS, KC_LBRC, KC_RBRC, KC_BSLS, KC_TILD,\
|
||||
//|--------+--------+--------+--------+--------+--------+--------| |--------+--------+--------+--------+--------+--------+--------|
|
||||
KC_LGUI, LOWER, KC_SPC, KC_ENT, RAISE, KC_RALT \
|
||||
KC_LGUI, _______, KC_SPC, KC_ENT, MO(3), KC_RALT
|
||||
//`--------------------------' `--------------------------'
|
||||
),
|
||||
|
||||
[_ADJUST] = LAYOUT_split_3x6_3( \
|
||||
[2] = LAYOUT_split_3x6_3(
|
||||
//,-----------------------------------------------------. ,-----------------------------------------------------.
|
||||
RESET, RGBRST, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX,\
|
||||
KC_TAB, KC_EXLM, KC_AT, KC_HASH, KC_DLR, KC_PERC, KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN, KC_BSPC,
|
||||
//|--------+--------+--------+--------+--------+--------| |--------+--------+--------+--------+--------+--------|
|
||||
RGB_TOG, RGB_HUI, RGB_SAI, RGB_VAI, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX,\
|
||||
KC_LCTL, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, KC_MINS, KC_EQL, KC_LBRC, KC_RBRC, KC_BSLS, KC_GRV,
|
||||
//|--------+--------+--------+--------+--------+--------| |--------+--------+--------+--------+--------+--------|
|
||||
RGB_MOD, RGB_HUD, RGB_SAD, RGB_VAD, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX,\
|
||||
KC_LSFT, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, KC_UNDS, KC_PLUS, KC_LCBR, KC_RCBR, KC_PIPE, KC_TILD,
|
||||
//|--------+--------+--------+--------+--------+--------+--------| |--------+--------+--------+--------+--------+--------+--------|
|
||||
KC_LGUI, LOWER, KC_SPC, KC_ENT, RAISE, KC_RALT \
|
||||
KC_LGUI, MO(3), KC_SPC, KC_ENT, _______, KC_RALT
|
||||
//`--------------------------' `--------------------------'
|
||||
),
|
||||
|
||||
[3] = LAYOUT_split_3x6_3(
|
||||
//,-----------------------------------------------------. ,-----------------------------------------------------.
|
||||
RESET, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX,
|
||||
//|--------+--------+--------+--------+--------+--------| |--------+--------+--------+--------+--------+--------|
|
||||
RGB_TOG, RGB_HUI, RGB_SAI, RGB_VAI, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX,
|
||||
//|--------+--------+--------+--------+--------+--------| |--------+--------+--------+--------+--------+--------|
|
||||
RGB_MOD, RGB_HUD, RGB_SAD, RGB_VAD, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX,
|
||||
//|--------+--------+--------+--------+--------+--------+--------| |--------+--------+--------+--------+--------+--------+--------|
|
||||
KC_LGUI, _______, KC_SPC, KC_ENT, _______, KC_RALT
|
||||
//`--------------------------' `--------------------------'
|
||||
)
|
||||
};
|
||||
|
||||
int RGB_current_mode;
|
||||
|
||||
void persistent_default_layer_set(uint16_t default_layer) {
|
||||
eeconfig_update_default_layer(default_layer);
|
||||
default_layer_set(default_layer);
|
||||
}
|
||||
|
||||
// Setting ADJUST layer RGB back to default
|
||||
void update_tri_layer_RGB(uint8_t layer1, uint8_t layer2, uint8_t layer3) {
|
||||
if (IS_LAYER_ON(layer1) && IS_LAYER_ON(layer2)) {
|
||||
layer_on(layer3);
|
||||
} else {
|
||||
layer_off(layer3);
|
||||
#ifdef OLED_DRIVER_ENABLE
|
||||
oled_rotation_t oled_init_user(oled_rotation_t rotation) {
|
||||
if (!is_master) {
|
||||
return OLED_ROTATION_180; // flips the display 180 degrees if offhand
|
||||
}
|
||||
return rotation;
|
||||
}
|
||||
|
||||
void matrix_init_user(void) {
|
||||
#ifdef RGBLIGHT_ENABLE
|
||||
RGB_current_mode = rgblight_config.mode;
|
||||
#endif
|
||||
//SSD1306 OLED init, make sure to add #define SSD1306OLED in config.h
|
||||
#ifdef SSD1306OLED
|
||||
iota_gfx_init(!has_usb()); // turns on the display
|
||||
#endif
|
||||
#define L_BASE 0
|
||||
#define L_LOWER 2
|
||||
#define L_RAISE 4
|
||||
#define L_ADJUST 8
|
||||
|
||||
void oled_render_layer_state(void) {
|
||||
oled_write_P(PSTR("Layer: "), false);
|
||||
switch (layer_state) {
|
||||
case L_BASE:
|
||||
oled_write_ln_P(PSTR("Default"), false);
|
||||
break;
|
||||
case L_LOWER:
|
||||
oled_write_ln_P(PSTR("Lower"), false);
|
||||
break;
|
||||
case L_RAISE:
|
||||
oled_write_ln_P(PSTR("Raise"), false);
|
||||
break;
|
||||
case L_ADJUST:
|
||||
case L_ADJUST|L_LOWER:
|
||||
case L_ADJUST|L_RAISE:
|
||||
case L_ADJUST|L_LOWER|L_RAISE:
|
||||
oled_write_ln_P(PSTR("Adjust"), false);
|
||||
break;
|
||||
}
|
||||
}
|
||||
|
||||
//SSD1306 OLED update loop, make sure to add #define SSD1306OLED in config.h
|
||||
#ifdef SSD1306OLED
|
||||
|
||||
// When add source files to SRC in rules.mk, you can use functions.
|
||||
const char *read_layer_state(void);
|
||||
const char *read_logo(void);
|
||||
void set_keylog(uint16_t keycode, keyrecord_t *record);
|
||||
const char *read_keylog(void);
|
||||
const char *read_keylogs(void);
|
||||
char keylog_str[24] = {};
|
||||
|
||||
// const char *read_mode_icon(bool swap);
|
||||
// const char *read_host_led_state(void);
|
||||
// void set_timelog(void);
|
||||
// const char *read_timelog(void);
|
||||
const char code_to_name[60] = {
|
||||
' ', ' ', ' ', ' ', 'a', 'b', 'c', 'd', 'e', 'f',
|
||||
'g', 'h', 'i', 'j', 'k', 'l', 'm', 'n', 'o', 'p',
|
||||
'q', 'r', 's', 't', 'u', 'v', 'w', 'x', 'y', 'z',
|
||||
'1', '2', '3', '4', '5', '6', '7', '8', '9', '0',
|
||||
'R', 'E', 'B', 'T', '_', '-', '=', '[', ']', '\\',
|
||||
'#', ';', '\'', '`', ',', '.', '/', ' ', ' ', ' '};
|
||||
|
||||
void matrix_scan_user(void) {
|
||||
iota_gfx_task();
|
||||
}
|
||||
|
||||
void matrix_render_user(struct CharacterMatrix *matrix) {
|
||||
if (is_master) {
|
||||
// If you want to change the display of OLED, you need to change here
|
||||
matrix_write_ln(matrix, read_layer_state());
|
||||
matrix_write_ln(matrix, read_keylog());
|
||||
//matrix_write_ln(matrix, read_keylogs());
|
||||
//matrix_write_ln(matrix, read_mode_icon(keymap_config.swap_lalt_lgui));
|
||||
//matrix_write_ln(matrix, read_host_led_state());
|
||||
//matrix_write_ln(matrix, read_timelog());
|
||||
} else {
|
||||
matrix_write(matrix, read_logo());
|
||||
void set_keylog(uint16_t keycode, keyrecord_t *record) {
|
||||
char name = ' ';
|
||||
if ((keycode >= QK_MOD_TAP && keycode <= QK_MOD_TAP_MAX) ||
|
||||
(keycode >= QK_LAYER_TAP && keycode <= QK_LAYER_TAP_MAX)) { keycode = keycode & 0xFF; }
|
||||
if (keycode < 60) {
|
||||
name = code_to_name[keycode];
|
||||
}
|
||||
|
||||
// update keylog
|
||||
snprintf(keylog_str, sizeof(keylog_str), "%dx%d, k%2d : %c",
|
||||
record->event.key.row, record->event.key.col,
|
||||
keycode, name);
|
||||
}
|
||||
|
||||
void matrix_update(struct CharacterMatrix *dest, const struct CharacterMatrix *source) {
|
||||
if (memcmp(dest->display, source->display, sizeof(dest->display))) {
|
||||
memcpy(dest->display, source->display, sizeof(dest->display));
|
||||
dest->dirty = true;
|
||||
}
|
||||
void oled_render_keylog(void) {
|
||||
oled_write(keylog_str, false);
|
||||
}
|
||||
|
||||
void iota_gfx_task_user(void) {
|
||||
struct CharacterMatrix matrix;
|
||||
matrix_clear(&matrix);
|
||||
matrix_render_user(&matrix);
|
||||
matrix_update(&display, &matrix);
|
||||
void render_bootmagic_status(bool status) {
|
||||
/* Show Ctrl-Gui Swap options */
|
||||
static const char PROGMEM logo[][2][3] = {
|
||||
{{0x97, 0x98, 0}, {0xb7, 0xb8, 0}},
|
||||
{{0x95, 0x96, 0}, {0xb5, 0xb6, 0}},
|
||||
};
|
||||
if (status) {
|
||||
oled_write_ln_P(logo[0][0], false);
|
||||
oled_write_ln_P(logo[0][1], false);
|
||||
} else {
|
||||
oled_write_ln_P(logo[1][0], false);
|
||||
oled_write_ln_P(logo[1][1], false);
|
||||
}
|
||||
}
|
||||
|
||||
void oled_render_logo(void) {
|
||||
static const char PROGMEM crkbd_logo[] = {
|
||||
0x80, 0x81, 0x82, 0x83, 0x84, 0x85, 0x86, 0x87, 0x88, 0x89, 0x8a, 0x8b, 0x8c, 0x8d, 0x8e, 0x8f, 0x90, 0x91, 0x92, 0x93, 0x94,
|
||||
0xa0, 0xa1, 0xa2, 0xa3, 0xa4, 0xa5, 0xa6, 0xa7, 0xa8, 0xa9, 0xaa, 0xab, 0xac, 0xad, 0xae, 0xaf, 0xb0, 0xb1, 0xb2, 0xb3, 0xb4,
|
||||
0xc0, 0xc1, 0xc2, 0xc3, 0xc4, 0xc5, 0xc6, 0xc7, 0xc8, 0xc9, 0xca, 0xcb, 0xcc, 0xcd, 0xce, 0xcf, 0xd0, 0xd1, 0xd2, 0xd3, 0xd4,
|
||||
0};
|
||||
oled_write_P(crkbd_logo, false);
|
||||
}
|
||||
|
||||
void oled_task_user(void) {
|
||||
if (is_master) {
|
||||
oled_render_layer_state();
|
||||
oled_render_keylog();
|
||||
} else {
|
||||
oled_render_logo();
|
||||
}
|
||||
}
|
||||
#endif//SSD1306OLED
|
||||
|
||||
bool process_record_user(uint16_t keycode, keyrecord_t *record) {
|
||||
if (record->event.pressed) {
|
||||
#ifdef SSD1306OLED
|
||||
set_keylog(keycode, record);
|
||||
#endif
|
||||
// set_timelog();
|
||||
}
|
||||
|
||||
switch (keycode) {
|
||||
case QWERTY:
|
||||
if (record->event.pressed) {
|
||||
persistent_default_layer_set(1UL<<_QWERTY);
|
||||
}
|
||||
return false;
|
||||
case LOWER:
|
||||
if (record->event.pressed) {
|
||||
layer_on(_LOWER);
|
||||
update_tri_layer_RGB(_LOWER, _RAISE, _ADJUST);
|
||||
} else {
|
||||
layer_off(_LOWER);
|
||||
update_tri_layer_RGB(_LOWER, _RAISE, _ADJUST);
|
||||
}
|
||||
return false;
|
||||
case RAISE:
|
||||
if (record->event.pressed) {
|
||||
layer_on(_RAISE);
|
||||
update_tri_layer_RGB(_LOWER, _RAISE, _ADJUST);
|
||||
} else {
|
||||
layer_off(_RAISE);
|
||||
update_tri_layer_RGB(_LOWER, _RAISE, _ADJUST);
|
||||
}
|
||||
return false;
|
||||
case ADJUST:
|
||||
if (record->event.pressed) {
|
||||
layer_on(_ADJUST);
|
||||
} else {
|
||||
layer_off(_ADJUST);
|
||||
}
|
||||
return false;
|
||||
case RGB_MOD:
|
||||
#ifdef RGBLIGHT_ENABLE
|
||||
if (record->event.pressed) {
|
||||
rgblight_mode(RGB_current_mode);
|
||||
rgblight_step();
|
||||
RGB_current_mode = rgblight_config.mode;
|
||||
}
|
||||
#endif
|
||||
return false;
|
||||
case RGBRST:
|
||||
#ifdef RGBLIGHT_ENABLE
|
||||
if (record->event.pressed) {
|
||||
eeconfig_update_rgblight_default();
|
||||
rgblight_enable();
|
||||
RGB_current_mode = rgblight_config.mode;
|
||||
}
|
||||
#endif
|
||||
break;
|
||||
}
|
||||
return true;
|
||||
}
|
||||
#endif // OLED_DRIVER_ENABLE
|
||||
|
@ -1,10 +1 @@
|
||||
|
||||
# If you want to change the display of OLED, you need to change here
|
||||
SRC += ./lib/glcdfont.c \
|
||||
./lib/rgb_state_reader.c \
|
||||
./lib/layer_state_reader.c \
|
||||
./lib/logo_reader.c \
|
||||
./lib/keylogger.c \
|
||||
# ./lib/mode_icon_reader.c \
|
||||
# ./lib/host_led_state_reader.c \
|
||||
# ./lib/timelogger.c \
|
||||
OLED_DRIVER_ENABLE = yes
|
||||
|
@ -1,44 +0,0 @@
|
||||
/*
|
||||
This is the c configuration file for the keymap
|
||||
|
||||
Copyright 2012 Jun Wako <wakojun@gmail.com>
|
||||
Copyright 2015 Jack Humbert
|
||||
|
||||
This program is free software: you can redistribute it and/or modify
|
||||
it under the terms of the GNU General Public License as published by
|
||||
the Free Software Foundation, either version 2 of the License, or
|
||||
(at your option) any later version.
|
||||
|
||||
This program is distributed in the hope that it will be useful,
|
||||
but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
GNU General Public License for more details.
|
||||
|
||||
You should have received a copy of the GNU General Public License
|
||||
along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
*/
|
||||
|
||||
#pragma once
|
||||
|
||||
//#define USE_MATRIX_I2C
|
||||
|
||||
/* Select hand configuration */
|
||||
|
||||
#define MASTER_LEFT
|
||||
// #define MASTER_RIGHT
|
||||
// #define EE_HANDS
|
||||
|
||||
#define SSD1306OLED
|
||||
|
||||
#define USE_SERIAL_PD2
|
||||
|
||||
#define TAPPING_FORCE_HOLD
|
||||
#define TAPPING_TERM 100
|
||||
|
||||
#undef RGBLED_NUM
|
||||
#define RGBLIGHT_ANIMATIONS
|
||||
#define RGBLED_NUM 27
|
||||
#define RGBLIGHT_LIMIT_VAL 120
|
||||
#define RGBLIGHT_HUE_STEP 10
|
||||
#define RGBLIGHT_SAT_STEP 17
|
||||
#define RGBLIGHT_VAL_STEP 17
|
@ -1,241 +0,0 @@
|
||||
#include QMK_KEYBOARD_H
|
||||
#ifdef PROTOCOL_LUFA
|
||||
#include "lufa.h"
|
||||
#include "split_util.h"
|
||||
#endif
|
||||
#ifdef SSD1306OLED
|
||||
#include "ssd1306.h"
|
||||
#endif
|
||||
|
||||
extern keymap_config_t keymap_config;
|
||||
|
||||
#ifdef RGBLIGHT_ENABLE
|
||||
//Following line allows macro to read current RGB settings
|
||||
extern rgblight_config_t rgblight_config;
|
||||
#endif
|
||||
|
||||
extern uint8_t is_master;
|
||||
|
||||
// Each layer gets a name for readability, which is then used in the keymap matrix below.
|
||||
// The underscores don't mean anything - you can have a layer called STUFF or any other name.
|
||||
// Layer names don't all need to be of the same length, obviously, and you can also skip them
|
||||
// entirely and just use numbers.
|
||||
#define _QWERTY 0
|
||||
#define _LOWER 1
|
||||
#define _RAISE 2
|
||||
#define _ADJUST 3
|
||||
|
||||
enum custom_keycodes {
|
||||
QWERTY = SAFE_RANGE,
|
||||
LOWER,
|
||||
RAISE,
|
||||
ADJUST,
|
||||
BACKLIT,
|
||||
RGBRST
|
||||
};
|
||||
|
||||
enum macro_keycodes {
|
||||
KC_SAMPLEMACRO,
|
||||
};
|
||||
|
||||
#define KC______ KC_TRNS
|
||||
#define KC_XXXXX KC_NO
|
||||
#define KC_LOWER LOWER
|
||||
#define KC_RAISE RAISE
|
||||
#define KC_RST RESET
|
||||
#define KC_LRST RGBRST
|
||||
#define KC_LTOG RGB_TOG
|
||||
#define KC_LHUI RGB_HUI
|
||||
#define KC_LHUD RGB_HUD
|
||||
#define KC_LSAI RGB_SAI
|
||||
#define KC_LSAD RGB_SAD
|
||||
#define KC_LVAI RGB_VAI
|
||||
#define KC_LVAD RGB_VAD
|
||||
#define KC_LMOD RGB_MOD
|
||||
#define KC_GUIEI GUI_T(KC_LANG2)
|
||||
#define KC_ALTKN ALT_T(KC_LANG1)
|
||||
|
||||
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
|
||||
[_QWERTY] = LAYOUT_kc( \
|
||||
//,-----------------------------------------. ,-----------------------------------------.
|
||||
TAB, Q, W, E, R, T, Y, U, I, O, P, BSPC,\
|
||||
//|------+------+------+------+------+------| |------+------+------+------+------+------|
|
||||
LCTL, A, S, D, F, G, H, J, K, L, SCLN, QUOT,\
|
||||
//|------+------+------+------+------+------| |------+------+------+------+------+------|
|
||||
LSFT, Z, X, C, V, B, N, M, COMM, DOT, SLSH, ESC,\
|
||||
//|------+------+------+------+------+------+------| |------+------+------+------+------+------+------|
|
||||
GUIEI, LOWER, SPC, ENT, RAISE, ALTKN \
|
||||
//`--------------------' `--------------------'
|
||||
),
|
||||
|
||||
[_LOWER] = LAYOUT_kc( \
|
||||
//,-----------------------------------------. ,-----------------------------------------.
|
||||
TAB, 1, 2, 3, 4, 5, 6, 7, 8, 9, 0, BSPC,\
|
||||
//|------+------+------+------+------+------| |------+------+------+------+------+------|
|
||||
LCTL, F1, F2, F3, F4, F5, LEFT, DOWN, UP, RIGHT, XXXXX, XXXXX,\
|
||||
//|------+------+------+------+------+------| |------+------+------+------+------+------|
|
||||
LSFT, F6, F7, F8, F9, F10, XXXXX, XXXXX, XXXXX, XXXXX, XXXXX, XXXXX,\
|
||||
//|------+------+------+------+------+------+------| |------+------+------+------+------+------+------|
|
||||
GUIEI, LOWER, SPC, ENT, RAISE, ALTKN \
|
||||
//`--------------------' `--------------------'
|
||||
),
|
||||
|
||||
[_RAISE] = LAYOUT_kc( \
|
||||
//,-----------------------------------------. ,-----------------------------------------.
|
||||
TAB, EXLM, AT, HASH, DLR, PERC, CIRC, AMPR, ASTR, LPRN, RPRN, BSPC,\
|
||||
//|------+------+------+------+------+------| |------+------+------+------+------+------|
|
||||
LCTL, XXXXX, XXXXX, XXXXX, XXXXX, XXXXX, MINS, EQL, LCBR, RCBR, PIPE, GRV,\
|
||||
//|------+------+------+------+------+------| |------+------+------+------+------+------|
|
||||
LSFT, XXXXX, XXXXX, XXXXX, XXXXX, XXXXX, UNDS, PLUS, LBRC, RBRC, BSLS, TILD,\
|
||||
//|------+------+------+------+------+------+------| |------+------+------+------+------+------+------|
|
||||
GUIEI, LOWER, SPC, ENT, RAISE, ALTKN \
|
||||
//`--------------------' `--------------------'
|
||||
),
|
||||
|
||||
[_ADJUST] = LAYOUT_kc( \
|
||||
//,-----------------------------------------. ,-----------------------------------------.
|
||||
RST, LRST, XXXXX, XXXXX, XXXXX, XXXXX, XXXXX, XXXXX, XXXXX, XXXXX, XXXXX, XXXXX,\
|
||||
//|------+------+------+------+------+------| |------+------+------+------+------+------|
|
||||
LTOG, LHUI, LSAI, LVAI, XXXXX, XXXXX, XXXXX, XXXXX, XXXXX, XXXXX, XXXXX, XXXXX,\
|
||||
//|------+------+------+------+------+------| |------+------+------+------+------+------|
|
||||
LMOD, LHUD, LSAD, LVAD, XXXXX, XXXXX, XXXXX, XXXXX, XXXXX, XXXXX, XXXXX, XXXXX,\
|
||||
//|------+------+------+------+------+------+------| |------+------+------+------+------+------+------|
|
||||
GUIEI, LOWER, SPC, ENT, RAISE, ALTKN \
|
||||
//`--------------------' `--------------------'
|
||||
)
|
||||
};
|
||||
|
||||
int RGB_current_mode;
|
||||
|
||||
void persistent_default_layer_set(uint16_t default_layer) {
|
||||
eeconfig_update_default_layer(default_layer);
|
||||
default_layer_set(default_layer);
|
||||
}
|
||||
|
||||
// Setting ADJUST layer RGB back to default
|
||||
void update_tri_layer_RGB(uint8_t layer1, uint8_t layer2, uint8_t layer3) {
|
||||
if (IS_LAYER_ON(layer1) && IS_LAYER_ON(layer2)) {
|
||||
layer_on(layer3);
|
||||
} else {
|
||||
layer_off(layer3);
|
||||
}
|
||||
}
|
||||
|
||||
void matrix_init_user(void) {
|
||||
#ifdef RGBLIGHT_ENABLE
|
||||
RGB_current_mode = rgblight_config.mode;
|
||||
#endif
|
||||
//SSD1306 OLED init, make sure to add #define SSD1306OLED in config.h
|
||||
#ifdef SSD1306OLED
|
||||
iota_gfx_init(!has_usb()); // turns on the display
|
||||
#endif
|
||||
}
|
||||
|
||||
//SSD1306 OLED update loop, make sure to add #define SSD1306OLED in config.h
|
||||
#ifdef SSD1306OLED
|
||||
|
||||
// When add source files to SRC in rules.mk, you can use functions.
|
||||
const char *read_layer_state(void);
|
||||
const char *read_logo(void);
|
||||
void set_keylog(uint16_t keycode, keyrecord_t *record);
|
||||
const char *read_keylog(void);
|
||||
const char *read_keylogs(void);
|
||||
|
||||
// const char *read_mode_icon(bool swap);
|
||||
// const char *read_host_led_state(void);
|
||||
// void set_timelog(void);
|
||||
// const char *read_timelog(void);
|
||||
|
||||
void matrix_scan_user(void) {
|
||||
iota_gfx_task();
|
||||
}
|
||||
|
||||
void matrix_render_user(struct CharacterMatrix *matrix) {
|
||||
if (is_master) {
|
||||
// If you want to change the display of OLED, you need to change here
|
||||
matrix_write_ln(matrix, read_layer_state());
|
||||
matrix_write_ln(matrix, read_keylog());
|
||||
matrix_write_ln(matrix, read_keylogs());
|
||||
//matrix_write_ln(matrix, read_mode_icon(keymap_config.swap_lalt_lgui));
|
||||
//matrix_write_ln(matrix, read_host_led_state());
|
||||
//matrix_write_ln(matrix, read_timelog());
|
||||
} else {
|
||||
matrix_write(matrix, read_logo());
|
||||
}
|
||||
}
|
||||
|
||||
void matrix_update(struct CharacterMatrix *dest, const struct CharacterMatrix *source) {
|
||||
if (memcmp(dest->display, source->display, sizeof(dest->display))) {
|
||||
memcpy(dest->display, source->display, sizeof(dest->display));
|
||||
dest->dirty = true;
|
||||
}
|
||||
}
|
||||
|
||||
void iota_gfx_task_user(void) {
|
||||
struct CharacterMatrix matrix;
|
||||
matrix_clear(&matrix);
|
||||
matrix_render_user(&matrix);
|
||||
matrix_update(&display, &matrix);
|
||||
}
|
||||
#endif//SSD1306OLED
|
||||
|
||||
bool process_record_user(uint16_t keycode, keyrecord_t *record) {
|
||||
if (record->event.pressed) {
|
||||
#ifdef SSD1306OLED
|
||||
set_keylog(keycode, record);
|
||||
#endif
|
||||
// set_timelog();
|
||||
}
|
||||
|
||||
switch (keycode) {
|
||||
case QWERTY:
|
||||
if (record->event.pressed) {
|
||||
persistent_default_layer_set(1UL<<_QWERTY);
|
||||
}
|
||||
return false;
|
||||
case LOWER:
|
||||
if (record->event.pressed) {
|
||||
layer_on(_LOWER);
|
||||
update_tri_layer_RGB(_LOWER, _RAISE, _ADJUST);
|
||||
} else {
|
||||
layer_off(_LOWER);
|
||||
update_tri_layer_RGB(_LOWER, _RAISE, _ADJUST);
|
||||
}
|
||||
return false;
|
||||
case RAISE:
|
||||
if (record->event.pressed) {
|
||||
layer_on(_RAISE);
|
||||
update_tri_layer_RGB(_LOWER, _RAISE, _ADJUST);
|
||||
} else {
|
||||
layer_off(_RAISE);
|
||||
update_tri_layer_RGB(_LOWER, _RAISE, _ADJUST);
|
||||
}
|
||||
return false;
|
||||
case ADJUST:
|
||||
if (record->event.pressed) {
|
||||
layer_on(_ADJUST);
|
||||
} else {
|
||||
layer_off(_ADJUST);
|
||||
}
|
||||
return false;
|
||||
case RGB_MOD:
|
||||
#ifdef RGBLIGHT_ENABLE
|
||||
if (record->event.pressed) {
|
||||
rgblight_mode(RGB_current_mode);
|
||||
rgblight_step();
|
||||
RGB_current_mode = rgblight_config.mode;
|
||||
}
|
||||
#endif
|
||||
return false;
|
||||
case RGBRST:
|
||||
#ifdef RGBLIGHT_ENABLE
|
||||
if (record->event.pressed) {
|
||||
eeconfig_update_rgblight_default();
|
||||
rgblight_enable();
|
||||
RGB_current_mode = rgblight_config.mode;
|
||||
}
|
||||
#endif
|
||||
break;
|
||||
}
|
||||
return true;
|
||||
}
|
@ -1,10 +0,0 @@
|
||||
|
||||
# If you want to change the display of OLED, you need to change here
|
||||
SRC += ./lib/glcdfont.c \
|
||||
./lib/rgb_state_reader.c \
|
||||
./lib/layer_state_reader.c \
|
||||
./lib/logo_reader.c \
|
||||
./lib/keylogger.c \
|
||||
# ./lib/mode_icon_reader.c \
|
||||
# ./lib/host_led_state_reader.c \
|
||||
# ./lib/timelogger.c \
|
@ -17,5 +17,3 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
*/
|
||||
|
||||
#include "common.h"
|
||||
|
||||
uint8_t is_master;
|
||||
|
@ -21,4 +21,4 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
#include "rev1.h"
|
||||
|
||||
#define has_usb() is_keyboard_master()
|
||||
extern uint8_t is_master;
|
||||
#define is_master is_keyboard_master()
|
||||
|
@ -19,7 +19,7 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
#include QMK_KEYBOARD_H
|
||||
|
||||
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
|
||||
[0] = LAYOUT_split_3x6_3( \
|
||||
[0] = LAYOUT_split_3x6_3(
|
||||
//,-----------------------------------------------------. ,-----------------------------------------------------.
|
||||
KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_BSPC,
|
||||
//|--------+--------+--------+--------+--------+--------| |--------+--------+--------+--------+--------+--------|
|
||||
@ -32,7 +32,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
|
||||
|
||||
),
|
||||
|
||||
[1] = LAYOUT_split_3x6_3( \
|
||||
[1] = LAYOUT_split_3x6_3(
|
||||
//,-----------------------------------------------------. ,-----------------------------------------------------.
|
||||
KC_TAB, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_BSPC,
|
||||
//|--------+--------+--------+--------+--------+--------| |--------+--------+--------+--------+--------+--------|
|
||||
@ -40,11 +40,11 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
|
||||
//|--------+--------+--------+--------+--------+--------| |--------+--------+--------+--------+--------+--------|
|
||||
KC_LSFT, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX,
|
||||
//|--------+--------+--------+--------+--------+--------+--------| |--------+--------+--------+--------+--------+--------+--------|
|
||||
KC_LGUI, _______, KC_SPC, KC_ENT, _______, KC_RALT\
|
||||
KC_LGUI, _______, KC_SPC, KC_ENT, _______, KC_RALT
|
||||
//`--------------------------' `--------------------------'
|
||||
),
|
||||
|
||||
[2] = LAYOUT_split_3x6_3( \
|
||||
[2] = LAYOUT_split_3x6_3(
|
||||
//,-----------------------------------------------------. ,-----------------------------------------------------.
|
||||
KC_TAB, KC_EXLM, KC_AT, KC_HASH, KC_DLR, KC_PERC, KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN, KC_BSPC,
|
||||
//|--------+--------+--------+--------+--------+--------| |--------+--------+--------+--------+--------+--------|
|
||||
@ -56,15 +56,15 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
|
||||
//`--------------------------' `--------------------------'
|
||||
),
|
||||
|
||||
[3] = LAYOUT_split_3x6_3( \
|
||||
[3] = LAYOUT_split_3x6_3(
|
||||
//,-----------------------------------------------------. ,-----------------------------------------------------.
|
||||
RESET, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX,\
|
||||
RESET, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX,
|
||||
//|--------+--------+--------+--------+--------+--------| |--------+--------+--------+--------+--------+--------|
|
||||
RGB_TOG, RGB_HUI, RGB_SAI, RGB_VAI, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX,\
|
||||
RGB_TOG, RGB_HUI, RGB_SAI, RGB_VAI, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX,
|
||||
//|--------+--------+--------+--------+--------+--------| |--------+--------+--------+--------+--------+--------|
|
||||
RGB_MOD, RGB_HUD, RGB_SAD, RGB_VAD, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX,\
|
||||
RGB_MOD, RGB_HUD, RGB_SAD, RGB_VAD, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX,
|
||||
//|--------+--------+--------+--------+--------+--------+--------| |--------+--------+--------+--------+--------+--------+--------|
|
||||
KC_LGUI, _______, KC_SPC, KC_ENT, _______, KC_RALT\
|
||||
KC_LGUI, _______, KC_SPC, KC_ENT, _______, KC_RALT
|
||||
//`--------------------------' `--------------------------'
|
||||
)
|
||||
};
|
||||
@ -83,30 +83,28 @@ oled_rotation_t oled_init_user(oled_rotation_t rotation) {
|
||||
#define L_ADJUST 8
|
||||
|
||||
void oled_render_layer_state(void) {
|
||||
oled_write_P("Layer: ", false);
|
||||
oled_write_P(PSTR("Layer: "), false);
|
||||
switch (layer_state) {
|
||||
case L_BASE:
|
||||
oled_write_ln_P("Default", false);
|
||||
oled_write_ln_P(PSTR("Default"), false);
|
||||
break;
|
||||
case L_LOWER:
|
||||
oled_write_ln_P("Lower", false);
|
||||
oled_write_ln_P(PSTR("Lower"), false);
|
||||
break;
|
||||
case L_RAISE:
|
||||
oled_write_ln_P("Raise", false);
|
||||
oled_write_ln_P(PSTR("Raise"), false);
|
||||
break;
|
||||
case L_ADJUST:
|
||||
case L_ADJUST|L_LOWER:
|
||||
case L_ADJUST|L_RAISE:
|
||||
case L_ADJUST|L_LOWER|L_RAISE:
|
||||
oled_write_ln_P("Adjust", false);
|
||||
oled_write_ln_P(PSTR("Adjust"), false);
|
||||
break;
|
||||
}
|
||||
}
|
||||
|
||||
|
||||
char keylog_str[24] = {};
|
||||
char keylogs_str[21] = {};
|
||||
int keylogs_str_idx = 0;
|
||||
|
||||
const char code_to_name[60] = {
|
||||
' ', ' ', ' ', ' ', 'a', 'b', 'c', 'd', 'e', 'f',
|
||||
@ -128,25 +126,11 @@ void set_keylog(uint16_t keycode, keyrecord_t *record) {
|
||||
snprintf(keylog_str, sizeof(keylog_str), "%dx%d, k%2d : %c",
|
||||
record->event.key.row, record->event.key.col,
|
||||
keycode, name);
|
||||
|
||||
// update keylogs
|
||||
if (keylogs_str_idx == sizeof(keylogs_str) - 1) {
|
||||
keylogs_str_idx = 0;
|
||||
for (int i = 0; i < sizeof(keylogs_str) - 1; i++) {
|
||||
keylogs_str[i] = ' ';
|
||||
}
|
||||
}
|
||||
|
||||
keylogs_str[keylogs_str_idx] = name;
|
||||
keylogs_str_idx++;
|
||||
}
|
||||
|
||||
void oled_render_keylog(void) {
|
||||
oled_write(keylog_str, false);
|
||||
}
|
||||
void oled_render_keylogs(void) {
|
||||
oled_write(keylogs_str, false);
|
||||
}
|
||||
|
||||
void render_bootmagic_status(bool status) {
|
||||
/* Show Ctrl-Gui Swap options */
|
||||
@ -176,8 +160,6 @@ void oled_task_user(void) {
|
||||
if (is_master) {
|
||||
oled_render_layer_state();
|
||||
oled_render_keylog();
|
||||
// oled_render_keylogs();
|
||||
// oled_renger_bootmagic_icon(keymap_config.swap_lalt_lgui);
|
||||
} else {
|
||||
oled_render_logo();
|
||||
}
|
||||
@ -186,7 +168,6 @@ void oled_task_user(void) {
|
||||
bool process_record_user(uint16_t keycode, keyrecord_t *record) {
|
||||
if (record->event.pressed) {
|
||||
set_keylog(keycode, record);
|
||||
// set_timelog();
|
||||
}
|
||||
return true;
|
||||
}
|
||||
|
@ -1,360 +0,0 @@
|
||||
#ifdef SSD1306OLED
|
||||
|
||||
#include "ssd1306.h"
|
||||
#include "i2c_master.h"
|
||||
#include <string.h>
|
||||
#include "print.h"
|
||||
#ifdef ADAFRUIT_BLE_ENABLE
|
||||
#include "adafruit_ble.h"
|
||||
#endif
|
||||
#ifdef PROTOCOL_LUFA
|
||||
#include "lufa.h"
|
||||
#endif
|
||||
#include "sendchar.h"
|
||||
#include "timer.h"
|
||||
|
||||
struct CharacterMatrix display;
|
||||
|
||||
extern const unsigned char font[] PROGMEM;
|
||||
|
||||
#ifndef OLED_BLANK_CHAR
|
||||
#define OLED_BLANK_CHAR ' '
|
||||
#endif
|
||||
|
||||
#ifndef OLED_BITS_FILTER
|
||||
#define OLED_BITS_FILTER
|
||||
#endif
|
||||
|
||||
// Set this to 1 to help diagnose early startup problems
|
||||
// when testing power-on with ble. Turn it off otherwise,
|
||||
// as the latency of printing most of the debug info messes
|
||||
// with the matrix scan, causing keys to drop.
|
||||
#define DEBUG_TO_SCREEN 0
|
||||
|
||||
//static uint16_t last_battery_update;
|
||||
//static uint32_t vbat;
|
||||
//#define BatteryUpdateInterval 10000 /* milliseconds */
|
||||
|
||||
// 'last_flush' is declared as uint16_t,
|
||||
// so this must be less than 65535
|
||||
#ifndef ScreenOffInterval
|
||||
#define ScreenOffInterval 60000 /* milliseconds */
|
||||
#endif
|
||||
|
||||
#if DEBUG_TO_SCREEN
|
||||
static uint8_t displaying;
|
||||
#endif
|
||||
static uint16_t last_flush;
|
||||
|
||||
static bool force_dirty = true;
|
||||
|
||||
// Write command sequence.
|
||||
// Returns true on success.
|
||||
static inline bool _send_cmd1(uint8_t cmd) {
|
||||
bool res = false;
|
||||
|
||||
if (i2c_start(SSD1306_ADDRESS, 100)) {
|
||||
xprintf("failed to start write to %d\n", SSD1306_ADDRESS);
|
||||
goto done;
|
||||
}
|
||||
|
||||
if (i2c_write(0x0 /* command byte follows */, 100)) {
|
||||
print("failed to write control byte\n");
|
||||
|
||||
goto done;
|
||||
}
|
||||
|
||||
if (i2c_write(cmd, 100)) {
|
||||
xprintf("failed to write command %d\n", cmd);
|
||||
goto done;
|
||||
}
|
||||
res = true;
|
||||
done:
|
||||
i2c_stop();
|
||||
return res;
|
||||
}
|
||||
|
||||
#define send_cmd1(c) if (!_send_cmd1(c)) {goto done;}
|
||||
#define send_cmds(c) if (!_send_cmds(c,sizeof(c))) {goto done;}
|
||||
#define cmd1(X) X
|
||||
#define cmd2(X,Y) X,Y
|
||||
#define cmd3(X,Y,Z) X,Y,Z
|
||||
|
||||
static bool _send_cmds(const uint8_t* p,uint8_t sz) {
|
||||
for(uint8_t i=sz;i;i--) {
|
||||
send_cmd1( pgm_read_byte(p++) );
|
||||
}
|
||||
return true;
|
||||
done:
|
||||
return false;
|
||||
}
|
||||
|
||||
#define SEND_CMDS(...) {static const uint8_t _cmds[] PROGMEM = { __VA_ARGS__,0 };send_cmds(_cmds);}
|
||||
|
||||
static void clear_display(void) {
|
||||
matrix_clear(&display);
|
||||
|
||||
// Clear all of the display bits (there can be random noise
|
||||
// in the RAM on startup)
|
||||
SEND_CMDS(
|
||||
cmd3(PageAddr, 0, (DisplayHeight / 8) - 1),
|
||||
cmd3(ColumnAddr, 0, DisplayWidth - 1)
|
||||
);
|
||||
|
||||
if (i2c_start(SSD1306_ADDRESS, 100)) {
|
||||
goto done;
|
||||
}
|
||||
if (i2c_write(0x40, 100)) {
|
||||
// Data mode
|
||||
goto done;
|
||||
}
|
||||
for (uint8_t row = MatrixRows;row; row--) {
|
||||
for (uint8_t col = DisplayWidth; col; col--) {
|
||||
i2c_write(0, 100);
|
||||
}
|
||||
}
|
||||
|
||||
display.dirty = false;
|
||||
|
||||
done:
|
||||
i2c_stop();
|
||||
}
|
||||
|
||||
#if DEBUG_TO_SCREEN
|
||||
#undef sendchar
|
||||
static int8_t capture_sendchar(uint8_t c) {
|
||||
sendchar(c);
|
||||
iota_gfx_write_char(c);
|
||||
|
||||
if (!displaying) {
|
||||
iota_gfx_flush();
|
||||
}
|
||||
return 0;
|
||||
}
|
||||
#endif
|
||||
|
||||
bool iota_gfx_init(bool rotate) {
|
||||
bool success = false;
|
||||
|
||||
i2c_init();
|
||||
SEND_CMDS(
|
||||
cmd1(DisplayOff),
|
||||
cmd2(SetDisplayClockDiv, 0x80),
|
||||
cmd2(SetMultiPlex, DisplayHeight - 1),
|
||||
cmd2(SetDisplayOffset, 0),
|
||||
cmd1(SetStartLine | 0x0),
|
||||
cmd2(SetChargePump, 0x14 /* Enable */),
|
||||
cmd2(SetMemoryMode, 0 /* horizontal addressing */)
|
||||
);
|
||||
|
||||
if(rotate){
|
||||
// the following Flip the display orientation 180 degrees
|
||||
SEND_CMDS(
|
||||
cmd1(SegRemap),
|
||||
cmd1(ComScanInc)
|
||||
);
|
||||
}else{
|
||||
// Flips the display orientation 0 degrees
|
||||
SEND_CMDS(
|
||||
cmd1(SegRemap | 0x1),
|
||||
cmd1(ComScanDec)
|
||||
);
|
||||
}
|
||||
|
||||
SEND_CMDS(
|
||||
#ifdef SSD1306_128X64
|
||||
cmd2(SetComPins, 0x12),
|
||||
#else
|
||||
cmd2(SetComPins, 0x2),
|
||||
#endif
|
||||
cmd2(SetContrast, 0x8f),
|
||||
cmd2(SetPreCharge, 0xf1),
|
||||
cmd2(SetVComDetect, 0x40),
|
||||
cmd1(DisplayAllOnResume),
|
||||
cmd1(NormalDisplay),
|
||||
cmd1(DeActivateScroll),
|
||||
cmd1(DisplayOn),
|
||||
|
||||
cmd2(SetContrast, 0) // Dim
|
||||
);
|
||||
|
||||
clear_display();
|
||||
|
||||
success = true;
|
||||
|
||||
iota_gfx_flush();
|
||||
|
||||
#if DEBUG_TO_SCREEN
|
||||
print_set_sendchar(capture_sendchar);
|
||||
#endif
|
||||
|
||||
done:
|
||||
return success;
|
||||
}
|
||||
|
||||
bool iota_gfx_off(void) {
|
||||
bool success = false;
|
||||
|
||||
send_cmd1(DisplayOff);
|
||||
success = true;
|
||||
|
||||
done:
|
||||
return success;
|
||||
}
|
||||
|
||||
bool iota_gfx_on(void) {
|
||||
bool success = false;
|
||||
|
||||
send_cmd1(DisplayOn);
|
||||
success = true;
|
||||
|
||||
done:
|
||||
return success;
|
||||
}
|
||||
|
||||
void matrix_write_char_inner(struct CharacterMatrix *matrix, uint8_t c) {
|
||||
*matrix->cursor = c;
|
||||
++matrix->cursor;
|
||||
|
||||
if (matrix->cursor - &matrix->display[0][0] == sizeof(matrix->display)) {
|
||||
// We went off the end; scroll the display upwards by one line
|
||||
memmove(&matrix->display[0], &matrix->display[1],
|
||||
MatrixCols * (MatrixRows - 1));
|
||||
matrix->cursor = &matrix->display[MatrixRows - 1][0];
|
||||
memset(matrix->cursor, OLED_BLANK_CHAR, MatrixCols);
|
||||
}
|
||||
}
|
||||
|
||||
void matrix_write_char(struct CharacterMatrix *matrix, uint8_t c) {
|
||||
matrix->dirty = true;
|
||||
|
||||
if (c == '\n') {
|
||||
// Clear to end of line from the cursor and then move to the
|
||||
// start of the next line
|
||||
uint8_t cursor_col = (matrix->cursor - &matrix->display[0][0]) % MatrixCols;
|
||||
|
||||
while (cursor_col++ < MatrixCols) {
|
||||
matrix_write_char_inner(matrix, OLED_BLANK_CHAR);
|
||||
}
|
||||
return;
|
||||
}
|
||||
|
||||
matrix_write_char_inner(matrix, c);
|
||||
}
|
||||
|
||||
void iota_gfx_write_char(uint8_t c) {
|
||||
matrix_write_char(&display, c);
|
||||
}
|
||||
|
||||
void matrix_write(struct CharacterMatrix *matrix, const char *data) {
|
||||
while (*data) {
|
||||
matrix_write_char(matrix, *data);
|
||||
++data;
|
||||
}
|
||||
}
|
||||
|
||||
void matrix_write_ln(struct CharacterMatrix *matrix, const char *data) {
|
||||
matrix_write(matrix, data);
|
||||
matrix_write(matrix, "\n");
|
||||
}
|
||||
|
||||
void iota_gfx_write(const char *data) {
|
||||
matrix_write(&display, data);
|
||||
}
|
||||
|
||||
void matrix_write_P(struct CharacterMatrix *matrix, const char *data) {
|
||||
while (true) {
|
||||
uint8_t c = pgm_read_byte(data);
|
||||
if (c == 0) {
|
||||
return;
|
||||
}
|
||||
matrix_write_char(matrix, c);
|
||||
++data;
|
||||
}
|
||||
}
|
||||
|
||||
void iota_gfx_write_P(const char *data) {
|
||||
matrix_write_P(&display, data);
|
||||
}
|
||||
|
||||
void matrix_clear(struct CharacterMatrix *matrix) {
|
||||
memset(matrix->display, OLED_BLANK_CHAR, sizeof(matrix->display));
|
||||
matrix->cursor = &matrix->display[0][0];
|
||||
matrix->dirty = true;
|
||||
}
|
||||
|
||||
void iota_gfx_clear_screen(void) {
|
||||
matrix_clear(&display);
|
||||
}
|
||||
|
||||
void matrix_render(struct CharacterMatrix *matrix) {
|
||||
last_flush = timer_read();
|
||||
iota_gfx_on();
|
||||
#if DEBUG_TO_SCREEN
|
||||
++displaying;
|
||||
#endif
|
||||
|
||||
// Move to the home position
|
||||
SEND_CMDS(
|
||||
cmd3(PageAddr, 0, MatrixRows - 1),
|
||||
cmd3(ColumnAddr, 0, (MatrixCols * FontWidth) - 1)
|
||||
);
|
||||
|
||||
if (i2c_write(SSD1306_ADDRESS, 100)) {
|
||||
goto done;
|
||||
}
|
||||
if (i2c_write(0x40, 100)) {
|
||||
// Data mode
|
||||
goto done;
|
||||
}
|
||||
|
||||
for (uint8_t row = 0; row < MatrixRows; ++row) {
|
||||
for (uint8_t col = 0; col < MatrixCols; ++col) {
|
||||
const uint8_t *glyph = font + (matrix->display[row][col] * FontWidth);
|
||||
|
||||
for (uint8_t glyphCol = 0; glyphCol < FontWidth; ++glyphCol) {
|
||||
uint8_t colBits = pgm_read_byte(glyph + glyphCol);
|
||||
i2c_write(colBits OLED_BITS_FILTER, 100);
|
||||
}
|
||||
|
||||
// 1 column of space between chars (it's not included in the glyph)
|
||||
//i2c_master_write(0);
|
||||
}
|
||||
}
|
||||
|
||||
matrix->dirty = false;
|
||||
|
||||
done:
|
||||
i2c_stop();
|
||||
#if DEBUG_TO_SCREEN
|
||||
--displaying;
|
||||
#endif
|
||||
}
|
||||
|
||||
void iota_gfx_flush(void) {
|
||||
matrix_render(&display);
|
||||
}
|
||||
|
||||
__attribute__ ((weak))
|
||||
void iota_gfx_task_user(void) {
|
||||
}
|
||||
|
||||
void iota_gfx_task(void) {
|
||||
iota_gfx_task_user();
|
||||
|
||||
if (display.dirty|| force_dirty) {
|
||||
iota_gfx_flush();
|
||||
force_dirty = false;
|
||||
}
|
||||
|
||||
if (ScreenOffInterval !=0 && timer_elapsed(last_flush) > ScreenOffInterval) {
|
||||
iota_gfx_off();
|
||||
}
|
||||
}
|
||||
|
||||
bool process_record_gfx(uint16_t keycode, keyrecord_t *record) {
|
||||
force_dirty = true;
|
||||
return true;
|
||||
}
|
||||
|
||||
#endif
|
@ -19,3 +19,5 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
#pragma once
|
||||
|
||||
#include "rev1.h"
|
||||
|
||||
extern uint8_t is_master;
|
@ -87,10 +87,6 @@ led_config_t g_led_config = { {
|
||||
|
||||
void matrix_init_kb(void) {
|
||||
|
||||
#ifdef KEYBOARD_crkbd_rev1_common
|
||||
is_master = (uint8_t)is_keyboard_master();
|
||||
#endif
|
||||
|
||||
#ifdef RGB_MATRIX_ENABLE
|
||||
if (!isLeftHand) {
|
||||
g_led_config = (led_config_t){ {
|
||||
|
@ -18,8 +18,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
|
||||
#pragma once
|
||||
|
||||
extern uint8_t is_master;
|
||||
|
||||
#include "crkbd.h"
|
||||
#if defined(KEYBOARD_crkbd_rev1_legacy)
|
||||
# include "legacy.h"
|
||||
|
@ -16,8 +16,6 @@
|
||||
|
||||
#include "drashna.h"
|
||||
|
||||
extern uint8_t is_master;
|
||||
|
||||
#ifdef RGBLIGHT_ENABLE
|
||||
// Following line allows macro to read current RGB settings
|
||||
extern rgblight_config_t rgblight_config;
|
||||
|
Loading…
Reference in New Issue
Block a user