Keyboard: adding Sentraq S65-Plus (#3406)
* New keyboard 'Sentraq S65-Plus' * Change ANSI_KEYMAP to LAYOUT_ansi * Use QMK_KEYBOARD_H as include
This commit is contained in:
Michael Zoech
Drashna Jaelre
parent
738a9fc16c
commit
c50e80e13b
55
keyboards/s65_plus/config.h
Normal file
55
keyboards/s65_plus/config.h
Normal file
@ -0,0 +1,55 @@
|
||||
#ifndef CONFIG_H
|
||||
#define CONFIG_H
|
||||
|
||||
#include "config_common.h"
|
||||
|
||||
/* USB Device descriptor parameter */
|
||||
#define PRODUCT S65-PLUS
|
||||
#define DESCRIPTION q.m.k. keyboard firmware for S65-PLUS
|
||||
#define VENDOR_ID 0xFEED
|
||||
#define PRODUCT_ID 0x6060
|
||||
#define DEVICE_VER 0x0001
|
||||
#define MANUFACTURER Sentraq
|
||||
|
||||
/* key matrix size */
|
||||
#define MATRIX_ROWS 5
|
||||
#define MATRIX_COLS 18
|
||||
|
||||
/* key matrix pins */
|
||||
#define MATRIX_ROW_PINS { C7, C6, B6, B5, B4 }
|
||||
#define MATRIX_COL_PINS { F6, F5, F4, F1, F0, E6, B0, B1, D5, B2, B3, D0, D1, D2, D4, D6, D7, F7 }
|
||||
#define UNUSED_PINS
|
||||
|
||||
/* number of backlight levels */
|
||||
#define BACKLIGHT_PIN B7
|
||||
#define BACKLIGHT_LEVELS 3
|
||||
|
||||
#define RGB_DI_PIN D3
|
||||
#define RGBLIGHT_ANIMATIONS
|
||||
#define RGBLED_NUM 20
|
||||
#define RGBLIGHT_HUE_STEP 8
|
||||
#define RGBLIGHT_SAT_STEP 8
|
||||
#define RGBLIGHT_VAL_STEP 8
|
||||
#define RGBLIGHT_EFFECT_KNIGHT_OFFSET 20
|
||||
|
||||
/* COL2ROW or ROW2COL */
|
||||
#define DIODE_DIRECTION COL2ROW
|
||||
|
||||
/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
|
||||
#define DEBOUNCING_DELAY 5
|
||||
|
||||
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
|
||||
#define LOCKING_SUPPORT_ENABLE
|
||||
|
||||
/* Locking resynchronize hack */
|
||||
#define LOCKING_RESYNC_ENABLE
|
||||
|
||||
/* key combination for command */
|
||||
#define IS_COMMAND() ( \
|
||||
keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
|
||||
)
|
||||
|
||||
/* prevent stuck modifiers */
|
||||
#define PREVENT_STUCK_MODIFIERS
|
||||
|
||||
#endif
|
||||
53
keyboards/s65_plus/keymaps/default/keymap.c
Normal file
53
keyboards/s65_plus/keymaps/default/keymap.c
Normal file
@ -0,0 +1,53 @@
|
||||
#include QMK_KEYBOARD_H
|
||||
|
||||
#define _BL 0
|
||||
#define _AL 1
|
||||
|
||||
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
|
||||
/* 0: Main layer
|
||||
* ┌─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┐
|
||||
* │ F1 │ F2 │ ESC │ 1 │ 2 │ 3 │ 4 │ 5 │ 6 │ 7 │ 8 │ 9 │ 0 │ - │ = │▒▒▒▒▒│BKSPC│ DEL │
|
||||
* ├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤
|
||||
* │ F3 │ F4 │ TAB │▒▒▒▒▒│ Q │ W │ E │ R │ T │ Y │ U │ I │ O │ P │ [ │ ] │ \ │PG_UP│
|
||||
* ├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤
|
||||
* │ F5 │ F6 │CAPSL│▒▒▒▒▒│ A │ S │ D │ F │ G │ H │ J │ K │ L │ ; │ ' │▒▒▒▒▒│ENTER│PG_DN│
|
||||
* ├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤
|
||||
* │ F7 │ F8 │▒▒▒▒▒│LSHFT│ Z │ X │ C │ V │ B │ N │ M │ , │ . │ / │▒▒▒▒▒│RSHFT│ UP │ END │
|
||||
* ├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤
|
||||
* │ F9 │ F10 │LCTRL│L_GUI│L_ALT│█████│█████│█████│ SPC │█████│█████│█████│R_ALT│ FN0 │RCTL │LEFT │DOWN │RIGHT│
|
||||
* └─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┘
|
||||
*/
|
||||
|
||||
/* 0: ANSI qwerty */
|
||||
[_BL] = LAYOUT_ansi(
|
||||
KC_F1, KC_F2, KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_DEL, \
|
||||
KC_F3, KC_F4, KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_PGUP, \
|
||||
KC_F5, KC_F6, KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, KC_PGDN, \
|
||||
KC_F7, KC_F8, KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP, KC_END, \
|
||||
KC_F9, KC_F10, KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, MO(_AL), KC_RCTL, KC_LEFT, KC_DOWN, KC_RIGHT),
|
||||
|
||||
|
||||
/* 1: LED layer
|
||||
* ┌─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┐
|
||||
* │ │ │RESET│ │ │ │ │ │ │ │ │ │ │ │ │▒▒▒▒▒│BLTOG│BLSTP│
|
||||
* ├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤
|
||||
* │ │ │ │▒▒▒▒▒│ │ │ │ │ │ │ │ │ │ │ │ │ │ │
|
||||
* ├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤
|
||||
* │ │ │ │▒▒▒▒▒│ │ │ │ │ │ │ │ │ │ │ │▒▒▒▒▒│ │ │
|
||||
* ├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤
|
||||
* │ │ │▒▒▒▒▒│ │UGTOG│UGMOD│UGHUI│UGHUD│UGSAI│UGSAD│UGVAI│UGVAD│ │ │▒▒▒▒▒│ │VOLU │ │
|
||||
* ├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤
|
||||
* │ │ │ │ │ │█████│█████│█████│ │█████│█████│█████│ │ │ │PREV │VOLD │NEXT │
|
||||
* └─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┘
|
||||
*/
|
||||
|
||||
[_AL] = LAYOUT_ansi(
|
||||
KC_TRNS, KC_TRNS, RESET, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, BL_TOGG, BL_STEP, \
|
||||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, \
|
||||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, \
|
||||
KC_TRNS, KC_TRNS, KC_TRNS, RGB_TOG, RGB_MOD, RGB_HUI, RGB_HUD, RGB_SAI, RGB_SAD, RGB_VAI, RGB_VAD, KC_TRNS, KC_TRNS, KC_TRNS, KC_VOLU, KC_TRNS, \
|
||||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_MPRV, KC_VOLD, KC_MNXT)
|
||||
};
|
||||
|
||||
const uint16_t PROGMEM fn_actions[] = {
|
||||
};
|
||||
14
keyboards/s65_plus/readme.md
Normal file
14
keyboards/s65_plus/readme.md
Normal file
@ -0,0 +1,14 @@
|
||||
S65-PLUS
|
||||
=====
|
||||
|
||||
DIY 65% keyboard from Sentraq.
|
||||
|
||||
Keyboard Maintainer: QMK Community
|
||||
Hardware Supported: S65-PLUS PCB
|
||||
Hardware Availability: https://sentraq.com/collections/kits/products/s65-plus-diy-keyboard-kit
|
||||
|
||||
Make example for this keyboard (after setting up your build environment):
|
||||
|
||||
make s65_plus:default
|
||||
|
||||
See [build environment setup](https://docs.qmk.fm/build_environment_setup.html) then the [make instructions](https://docs.qmk.fm/make_instructions.html) for more information.
|
||||
66
keyboards/s65_plus/rules.mk
Normal file
66
keyboards/s65_plus/rules.mk
Normal file
@ -0,0 +1,66 @@
|
||||
|
||||
|
||||
# MCU name
|
||||
MCU = atmega32u4
|
||||
|
||||
# Processor frequency.
|
||||
# This will define a symbol, F_CPU, in all source code files equal to the
|
||||
# processor frequency in Hz. You can then use this symbol in your source code to
|
||||
# calculate timings. Do NOT tack on a 'UL' at the end, this will be done
|
||||
# automatically to create a 32-bit value in your source code.
|
||||
#
|
||||
# This will be an integer division of F_USB below, as it is sourced by
|
||||
# F_USB after it has run through any CPU prescalers. Note that this value
|
||||
# does not *change* the processor frequency - it should merely be updated to
|
||||
# reflect the processor speed set externally so that the code can use accurate
|
||||
# software delays.
|
||||
F_CPU = 16000000
|
||||
|
||||
|
||||
#
|
||||
# LUFA specific
|
||||
#
|
||||
# Target architecture (see library "Board Types" documentation).
|
||||
ARCH = AVR8
|
||||
|
||||
# Input clock frequency.
|
||||
# This will define a symbol, F_USB, in all source code files equal to the
|
||||
# input clock frequency (before any prescaling is performed) in Hz. This value may
|
||||
# differ from F_CPU if prescaling is used on the latter, and is required as the
|
||||
# raw input clock is fed directly to the PLL sections of the AVR for high speed
|
||||
# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
|
||||
# at the end, this will be done automatically to create a 32-bit value in your
|
||||
# source code.
|
||||
#
|
||||
# If no clock division is performed on the input clock inside the AVR (via the
|
||||
# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
|
||||
F_USB = $(F_CPU)
|
||||
|
||||
# Interrupt driven control endpoint task(+60)
|
||||
OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
|
||||
|
||||
|
||||
# Boot Section Size in *bytes*
|
||||
# Teensy halfKay 512
|
||||
# Teensy++ halfKay 1024
|
||||
# Atmel DFU loader 4096
|
||||
# LUFA bootloader 4096
|
||||
# USBaspLoader 2048
|
||||
OPT_DEFS += -DBOOTLOADER_SIZE=4096
|
||||
|
||||
|
||||
# Build Options
|
||||
# change yes to no to disable
|
||||
#
|
||||
BOOTMAGIC_ENABLE = yes # Virtual DIP switch configuration(+1000)
|
||||
MOUSEKEY_ENABLE = no # Mouse keys(+4700)
|
||||
EXTRAKEY_ENABLE = yes # Audio control and System control(+450)
|
||||
# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
|
||||
SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
|
||||
MIDI_ENABLE = no # MIDI controls
|
||||
UNICODE_ENABLE = no # Unicode
|
||||
BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
|
||||
AUDIO_ENABLE = no # Audio output on port C6
|
||||
NKRO_ENABLE = yes # USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
|
||||
BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality
|
||||
RGBLIGHT_ENABLE = yes # Enable RGB light
|
||||
24
keyboards/s65_plus/s65_plus.c
Normal file
24
keyboards/s65_plus/s65_plus.c
Normal file
@ -0,0 +1,24 @@
|
||||
#include "s65_plus.h"
|
||||
#include "led.h"
|
||||
|
||||
void matrix_init_kb(void) {
|
||||
// put your keyboard start-up code here
|
||||
// runs once when the firmware starts up
|
||||
matrix_init_user();
|
||||
};
|
||||
|
||||
void matrix_scan_kb(void) {
|
||||
// put your looping keyboard code here
|
||||
// runs every cycle (a lot)
|
||||
matrix_scan_user();
|
||||
};
|
||||
|
||||
void led_set_kb(uint8_t usb_led) {
|
||||
if (usb_led & (1<<USB_LED_CAPS_LOCK)) {
|
||||
// Turn capslock on
|
||||
PORTB &= ~(1<<7);
|
||||
} else {
|
||||
// Turn capslock off
|
||||
PORTB |= (1<<7);
|
||||
}
|
||||
}
|
||||
23
keyboards/s65_plus/s65_plus.h
Normal file
23
keyboards/s65_plus/s65_plus.h
Normal file
@ -0,0 +1,23 @@
|
||||
#ifndef S60PLUS_H
|
||||
#define S60PLUS_H
|
||||
|
||||
#include "quantum.h"
|
||||
|
||||
#define LAYOUT_ansi( \
|
||||
K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012, K013, K014, K016, K017, \
|
||||
K100, K101, K102, K104, K105, K106, K107, K108, K109, K110, K111, K112, K113, K114, K115, K116, K117, \
|
||||
K200, K201, K202, K204, K205, K206, K207, K208, K209, K210, K211, K212, K213, K214, K216, K217, \
|
||||
K300, K301, K303, K304, K305, K306, K307, K308, K309, K310, K311, K312, K313, K315, K316, K317, \
|
||||
K400, K401, K402, K403, K404, K408, K412, K413, K414, K415, K416, K417 \
|
||||
) { \
|
||||
{ K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012, K013, K014, KC_NO, K016, K017 }, \
|
||||
{ K100, K101, K102, KC_NO, K104, K105, K106, K107, K108, K109, K110, K111, K112, K113, K114, K115, K116, K117 }, \
|
||||
{ K200, K201, K202, KC_NO, K204, K205, K206, K207, K208, K209, K210, K211, K212, K213, K214, KC_NO, K216, K217 }, \
|
||||
{ K300, K301, KC_NO, K303, K304, K305, K306, K307, K308, K309, K310, K311, K312, K313, KC_NO, K315, K316, K317 }, \
|
||||
{ K400, K401, K402, K403, K404, KC_NO, KC_NO, KC_NO, K408, KC_NO, KC_NO, KC_NO, K412, K413, K414, K415, K416, K417 } \
|
||||
}
|
||||
|
||||
void matrix_init_user(void);
|
||||
void matrix_scan_user(void);
|
||||
|
||||
#endif
|
||||
Loading…
Reference in New Issue
Block a user