alvierahman90/qmk_firmware
1
0
Fork 0
Code Issues Pull Requests Projects Releases Wiki Activity

[Keyboard] wilba.tech PCB refactoring (#6982)

Browse Source 
* Cleanup

* Refactor VIA rules.mk

* WT mono backlight refactor, VIA support

* Added WT75-C

* Fixed compile error

* Cleanup rules.mk

* Review changes

* Review changes
This commit is contained in:
Wilba 2019-10-12 15:37:03 +11:00 committed by Drashna Jaelre
parent 22aa2ce6b2
commit e47ab6a575
48 changed files with 1132 additions and 1250 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

2
keyboards/aeboards/aegis/config.h
View File

@ -47,8 +47,6 @@
/* Locking resynchronize hack */
#define LOCKING_RESYNC_ENABLE
//#define WT_MONO_BACKLIGHT
#define DYNAMIC_KEYMAP_LAYER_COUNT 4
// EEPROM usage

2
keyboards/aeboards/ext65/config.h
View File

@ -47,8 +47,6 @@
/* Locking resynchronize hack */
#define LOCKING_RESYNC_ENABLE
//#define WT_MONO_BACKLIGHT
#define DYNAMIC_KEYMAP_LAYER_COUNT 4
// EEPROM usage

3
keyboards/snagpad/config.h
View File

@ -48,9 +48,6 @@
#define RGBLIGHT_VAL_STEP 8
#endif
// Does not use WT_MONO_BACKLIGHT
// #define WT_MONO_BACKLIGHT
#define DYNAMIC_KEYMAP_LAYER_COUNT 4
// EEPROM usage

46
keyboards/wilba_tech/rama_works_koyu/rules.mk
View File

@ -1,5 +1,3 @@
# project specific files
SRC = keyboards/wilba_tech/wt_main.c \
keyboards/wilba_tech/wt_rgb_backlight.c \
@ -10,42 +8,14 @@ SRC = keyboards/wilba_tech/wt_main.c \
# MCU name
MCU = atmega32u4
# Processor frequency.
# This will define a symbol, F_CPU, in all source code files equal to the
# processor frequency in Hz. You can then use this symbol in your source code to
# calculate timings. Do NOT tack on a 'UL' at the end, this will be done
# automatically to create a 32-bit value in your source code.
#
# This will be an integer division of F_USB below, as it is sourced by
# F_USB after it has run through any CPU prescalers. Note that this value
# does not *change* the processor frequency - it should merely be updated to
# reflect the processor speed set externally so that the code can use accurate
# software delays.
F_CPU = 16000000
#
# LUFA specific
#
# Target architecture (see library "Board Types" documentation).
ARCH = AVR8
# Input clock frequency.
# This will define a symbol, F_USB, in all source code files equal to the
# input clock frequency (before any prescaling is performed) in Hz. This value may
# differ from F_CPU if prescaling is used on the latter, and is required as the
# raw input clock is fed directly to the PLL sections of the AVR for high speed
# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
# at the end, this will be done automatically to create a 32-bit value in your
# source code.
#
# If no clock division is performed on the input clock inside the AVR (via the
# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
F_USB = $(F_CPU)
# Interrupt driven control endpoint task(+60)
OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
# Boot Section
# Bootloader selection
# Teensy halfkay
# Pro Micro caterina
# Atmel DFU atmel-dfu
# LUFA DFU lufa-dfu
# QMK DFU qmk-dfu
# ATmega32A bootloadHID
# ATmega328P USBasp
BOOTLOADER = atmel-dfu
# Do not put the microcontroller into power saving mode

2
keyboards/wilba_tech/rama_works_m10_b/config.h
View File

@ -181,8 +181,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
/* override number of MIDI tone keycodes (each octave adds 12 keycodes and allocates 12 bytes) */
//#define MIDI_TONE_KEYCODE_OCTAVES 1
//#define WT_MONO_BACKLIGHT
#define DYNAMIC_KEYMAP_LAYER_COUNT 4
// EEPROM usage

46
keyboards/wilba_tech/rama_works_m10_b/rules.mk
View File

@ -4,44 +4,14 @@ SRC = keyboards/wilba_tech/wt_main.c
# MCU name
MCU = atmega32u4
# Processor frequency.
# This will define a symbol, F_CPU, in all source code files equal to the
# processor frequency in Hz. You can then use this symbol in your source code to
# calculate timings. Do NOT tack on a 'UL' at the end, this will be done
# automatically to create a 32-bit value in your source code.
#
# This will be an integer division of F_USB below, as it is sourced by
# F_USB after it has run through any CPU prescalers. Note that this value
# does not *change* the processor frequency - it should merely be updated to
# reflect the processor speed set externally so that the code can use accurate
# software delays.
F_CPU = 16000000
#
# LUFA specific
#
# Target architecture (see library "Board Types" documentation).
ARCH = AVR8
# Input clock frequency.
# This will define a symbol, F_USB, in all source code files equal to the
# input clock frequency (before any prescaling is performed) in Hz. This value may
# differ from F_CPU if prescaling is used on the latter, and is required as the
# raw input clock is fed directly to the PLL sections of the AVR for high speed
# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
# at the end, this will be done automatically to create a 32-bit value in your
# source code.
#
# If no clock division is performed on the input clock inside the AVR (via the
# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
F_USB = $(F_CPU)
# Interrupt driven control endpoint task(+60)
OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
# Boot Section
# Bootloader selection
# Teensy halfkay
# Pro Micro caterina
# Atmel DFU atmel-dfu
# LUFA DFU lufa-dfu
# QMK DFU qmk-dfu
# ATmega32A bootloadHID
# ATmega328P USBasp
BOOTLOADER = atmel-dfu

44
keyboards/wilba_tech/rama_works_m60_a/rules.mk
View File

@ -10,42 +10,14 @@ SRC = keyboards/wilba_tech/wt_main.c \
# MCU name
MCU = atmega32u4
# Processor frequency.
# This will define a symbol, F_CPU, in all source code files equal to the
# processor frequency in Hz. You can then use this symbol in your source code to
# calculate timings. Do NOT tack on a 'UL' at the end, this will be done
# automatically to create a 32-bit value in your source code.
#
# This will be an integer division of F_USB below, as it is sourced by
# F_USB after it has run through any CPU prescalers. Note that this value
# does not *change* the processor frequency - it should merely be updated to
# reflect the processor speed set externally so that the code can use accurate
# software delays.
F_CPU = 16000000
#
# LUFA specific
#
# Target architecture (see library "Board Types" documentation).
ARCH = AVR8
# Input clock frequency.
# This will define a symbol, F_USB, in all source code files equal to the
# input clock frequency (before any prescaling is performed) in Hz. This value may
# differ from F_CPU if prescaling is used on the latter, and is required as the
# raw input clock is fed directly to the PLL sections of the AVR for high speed
# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
# at the end, this will be done automatically to create a 32-bit value in your
# source code.
#
# If no clock division is performed on the input clock inside the AVR (via the
# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
F_USB = $(F_CPU)
# Interrupt driven control endpoint task(+60)
OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
# Boot Section
# Bootloader selection
# Teensy halfkay
# Pro Micro caterina
# Atmel DFU atmel-dfu
# LUFA DFU lufa-dfu
# QMK DFU qmk-dfu
# ATmega32A bootloadHID
# ATmega328P USBasp
BOOTLOADER = atmel-dfu
# Do not put the microcontroller into power saving mode

45
keyboards/wilba_tech/rama_works_m6_a/rules.mk
View File

@ -4,43 +4,14 @@ SRC = keyboards/wilba_tech/wt_main.c
# MCU name
MCU = atmega32u4
# Processor frequency.
# This will define a symbol, F_CPU, in all source code files equal to the
# processor frequency in Hz. You can then use this symbol in your source code to
# calculate timings. Do NOT tack on a 'UL' at the end, this will be done
# automatically to create a 32-bit value in your source code.
#
# This will be an integer division of F_USB below, as it is sourced by
# F_USB after it has run through any CPU prescalers. Note that this value
# does not *change* the processor frequency - it should merely be updated to
# reflect the processor speed set externally so that the code can use accurate
# software delays.
F_CPU = 16000000
#
# LUFA specific
#
# Target architecture (see library "Board Types" documentation).
ARCH = AVR8
# Input clock frequency.
# This will define a symbol, F_USB, in all source code files equal to the
# input clock frequency (before any prescaling is performed) in Hz. This value may
# differ from F_CPU if prescaling is used on the latter, and is required as the
# raw input clock is fed directly to the PLL sections of the AVR for high speed
# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
# at the end, this will be done automatically to create a 32-bit value in your
# source code.
#
# If no clock division is performed on the input clock inside the AVR (via the
# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
F_USB = $(F_CPU)
# Interrupt driven control endpoint task(+60)
OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
# Boot Section
# Bootloader selection
# Teensy halfkay
# Pro Micro caterina
# Atmel DFU atmel-dfu
# LUFA DFU lufa-dfu
# QMK DFU qmk-dfu
# ATmega32A bootloadHID
# ATmega328P USBasp
BOOTLOADER = atmel-dfu
# Do not put the microcontroller into power saving mode

46
keyboards/wilba_tech/rama_works_m6_b/rules.mk
View File

@ -5,47 +5,17 @@ SRC = keyboards/wilba_tech/wt_main.c \
drivers/issi/is31fl3218.c \
drivers/avr/i2c_master.c
# MCU name
MCU = atmega32u4
# Processor frequency.
# This will define a symbol, F_CPU, in all source code files equal to the
# processor frequency in Hz. You can then use this symbol in your source code to
# calculate timings. Do NOT tack on a 'UL' at the end, this will be done
# automatically to create a 32-bit value in your source code.
#
# This will be an integer division of F_USB below, as it is sourced by
# F_USB after it has run through any CPU prescalers. Note that this value
# does not *change* the processor frequency - it should merely be updated to
# reflect the processor speed set externally so that the code can use accurate
# software delays.
F_CPU = 16000000
#
# LUFA specific
#
# Target architecture (see library "Board Types" documentation).
ARCH = AVR8
# Input clock frequency.
# This will define a symbol, F_USB, in all source code files equal to the
# input clock frequency (before any prescaling is performed) in Hz. This value may
# differ from F_CPU if prescaling is used on the latter, and is required as the
# raw input clock is fed directly to the PLL sections of the AVR for high speed
# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
# at the end, this will be done automatically to create a 32-bit value in your
# source code.
#
# If no clock division is performed on the input clock inside the AVR (via the
# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
F_USB = $(F_CPU)
# Interrupt driven control endpoint task(+60)
OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
# Boot Section
# Bootloader selection
# Teensy halfkay
# Pro Micro caterina
# Atmel DFU atmel-dfu
# LUFA DFU lufa-dfu
# QMK DFU qmk-dfu
# ATmega32A bootloadHID
# ATmega328P USBasp
BOOTLOADER = atmel-dfu
# Do not put the microcontroller into power saving mode

2
keyboards/wilba_tech/rama_works_u80_a/config.h
View File

@ -179,8 +179,6 @@
/* override number of MIDI tone keycodes (each octave adds 12 keycodes and allocates 12 bytes) */
//#define MIDI_TONE_KEYCODE_OCTAVES 1
//#define WT_MONO_BACKLIGHT
// IS31FL3731 driver
#define DRIVER_COUNT 3
#define DRIVER_LED_TOTAL 108

46
keyboards/wilba_tech/rama_works_u80_a/rules.mk
View File

@ -8,44 +8,14 @@ SRC = keyboards/wilba_tech/wt_main.c \
# MCU name
MCU = atmega32u4
# Processor frequency.
# This will define a symbol, F_CPU, in all source code files equal to the
# processor frequency in Hz. You can then use this symbol in your source code to
# calculate timings. Do NOT tack on a 'UL' at the end, this will be done
# automatically to create a 32-bit value in your source code.
#
# This will be an integer division of F_USB below, as it is sourced by
# F_USB after it has run through any CPU prescalers. Note that this value
# does not *change* the processor frequency - it should merely be updated to
# reflect the processor speed set externally so that the code can use accurate
# software delays.
F_CPU = 16000000
#
# LUFA specific
#
# Target architecture (see library "Board Types" documentation).
ARCH = AVR8
# Input clock frequency.
# This will define a symbol, F_USB, in all source code files equal to the
# input clock frequency (before any prescaling is performed) in Hz. This value may
# differ from F_CPU if prescaling is used on the latter, and is required as the
# raw input clock is fed directly to the PLL sections of the AVR for high speed
# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
# at the end, this will be done automatically to create a 32-bit value in your
# source code.
#
# If no clock division is performed on the input clock inside the AVR (via the
# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
F_USB = $(F_CPU)
# Interrupt driven control endpoint task(+60)
OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
# Boot Section
# Bootloader selection
# Teensy halfkay
# Pro Micro caterina
# Atmel DFU atmel-dfu
# LUFA DFU lufa-dfu
# QMK DFU qmk-dfu
# ATmega32A bootloadHID
# ATmega328P USBasp
BOOTLOADER = atmel-dfu

35
keyboards/wilba_tech/wt60_a/config.h
View File

@ -179,14 +179,33 @@
/* override number of MIDI tone keycodes (each octave adds 12 keycodes and allocates 12 bytes) */
//#define MIDI_TONE_KEYCODE_OCTAVES 1
#define WT_MONO_BACKLIGHT
// enable the mono backlight
#define MONO_BACKLIGHT_ENABLED 1
// enable the RGB indicator for WT75-A
#define MONO_BACKLIGHT_WT75_A
// disable backlight when USB suspended (PC sleep/hibernate/shutdown)
#define MONO_BACKLIGHT_DISABLE_WHEN_USB_SUSPENDED 0
// disable backlight after timeout in minutes, 0 = no timeout
#define MONO_BACKLIGHT_DISABLE_AFTER_TIMEOUT 0
// the default brightness
#define MONO_BACKLIGHT_BRIGHTNESS 255
// the default effect
#define MONO_BACKLIGHT_EFFECT 1
// the default effect speed (0-3)
#define MONO_BACKLIGHT_EFFECT_SPEED 0
#define DYNAMIC_KEYMAP_LAYER_COUNT 4
// EEPROM usage
// TODO: refactor with new user EEPROM code (coming soon)
#define EEPROM_MAGIC 0x451F
#define EEPROM_MAGIC 0x4520
#define EEPROM_MAGIC_ADDR 34
// Bump this every time we change what we store
// This will automatically reset the EEPROM with defaults
@ -194,9 +213,11 @@
#define EEPROM_VERSION 0x08
#define EEPROM_VERSION_ADDR 36
// Dynamic keymap starts after EEPROM version
#define DYNAMIC_KEYMAP_EEPROM_ADDR 37
// Dynamic macro starts after dynamic keymaps (37+(4*5*14*2)) = (37+560)
#define DYNAMIC_KEYMAP_MACRO_EEPROM_ADDR 597
#define DYNAMIC_KEYMAP_MACRO_EEPROM_SIZE 427
// Backlight config starts after EEPROM version
#define MONO_BACKLIGHT_CONFIG_EEPROM_ADDR 37
// Dynamic keymap starts after backlight config (37+7)
#define DYNAMIC_KEYMAP_EEPROM_ADDR 44
// Dynamic macro starts after dynamic keymaps (44+(4*5*14*2)) = (44+560)
#define DYNAMIC_KEYMAP_MACRO_EEPROM_ADDR 604
#define DYNAMIC_KEYMAP_MACRO_EEPROM_SIZE 420
#define DYNAMIC_KEYMAP_MACRO_COUNT 16

69
keyboards/wilba_tech/wt60_a/keymaps/via/rules.mk
View File

@ -1,71 +1,2 @@
# project specific files
SRC = drivers/issi/is31fl3736.c \
drivers/avr/i2c_master.c \
keyboards/wilba_tech/wt_mono_backlight.c \
keyboards/wilba_tech/wt_main.c
# MCU name
MCU = atmega32u4
# Processor frequency.
# This will define a symbol, F_CPU, in all source code files equal to the
# processor frequency in Hz. You can then use this symbol in your source code to
# calculate timings. Do NOT tack on a 'UL' at the end, this will be done
# automatically to create a 32-bit value in your source code.
#
# This will be an integer division of F_USB below, as it is sourced by
# F_USB after it has run through any CPU prescalers. Note that this value
# does not *change* the processor frequency - it should merely be updated to
# reflect the processor speed set externally so that the code can use accurate
# software delays.
F_CPU = 16000000
#
# LUFA specific
#
# Target architecture (see library "Board Types" documentation).
ARCH = AVR8
# Input clock frequency.
# This will define a symbol, F_USB, in all source code files equal to the
# input clock frequency (before any prescaling is performed) in Hz. This value may
# differ from F_CPU if prescaling is used on the latter, and is required as the
# raw input clock is fed directly to the PLL sections of the AVR for high speed
# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
# at the end, this will be done automatically to create a 32-bit value in your
# source code.
#
# If no clock division is performed on the input clock inside the AVR (via the
# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
F_USB = $(F_CPU)
# Interrupt driven control endpoint task(+60)
OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
# Boot Section
BOOTLOADER = atmel-dfu
# Build Options
# change yes to no to disable
#
BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000)
MOUSEKEY_ENABLE = no # Mouse keys(+4700)
EXTRAKEY_ENABLE = yes # Audio control and System control(+450)
CONSOLE_ENABLE = no # Console for debug(+400)
COMMAND_ENABLE = no # Commands for debug and configuration
# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
NKRO_ENABLE = yes # USB Nkey Rollover
BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality on B7 by default
MIDI_ENABLE = no # MIDI support (+2400 to 4200, depending on config)
UNICODE_ENABLE = no # Unicode
BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
AUDIO_ENABLE = no # Audio output on port C6
FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches
RAW_ENABLE = yes
DYNAMIC_KEYMAP_ENABLE = yes

1
keyboards/wilba_tech/wt60_a/rules.mk
View File

@ -1,6 +1,7 @@
# project specific files
SRC = drivers/issi/is31fl3736.c \
drivers/avr/i2c_master.c \
quantum/color.c \
keyboards/wilba_tech/wt_mono_backlight.c \
keyboards/wilba_tech/wt_main.c

66
keyboards/wilba_tech/wt60_d/keymaps/via/rules.mk
View File

@ -1,68 +1,2 @@
# project specific files
SRC = keyboards/wilba_tech/wt_main.c
# MCU name
MCU = atmega32u4
# Processor frequency.
# This will define a symbol, F_CPU, in all source code files equal to the
# processor frequency in Hz. You can then use this symbol in your source code to
# calculate timings. Do NOT tack on a 'UL' at the end, this will be done
# automatically to create a 32-bit value in your source code.
#
# This will be an integer division of F_USB below, as it is sourced by
# F_USB after it has run through any CPU prescalers. Note that this value
# does not *change* the processor frequency - it should merely be updated to
# reflect the processor speed set externally so that the code can use accurate
# software delays.
F_CPU = 16000000
#
# LUFA specific
#
# Target architecture (see library "Board Types" documentation).
ARCH = AVR8
# Input clock frequency.
# This will define a symbol, F_USB, in all source code files equal to the
# input clock frequency (before any prescaling is performed) in Hz. This value may
# differ from F_CPU if prescaling is used on the latter, and is required as the
# raw input clock is fed directly to the PLL sections of the AVR for high speed
# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
# at the end, this will be done automatically to create a 32-bit value in your
# source code.
#
# If no clock division is performed on the input clock inside the AVR (via the
# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
F_USB = $(F_CPU)
# Interrupt driven control endpoint task(+60)
OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
# Boot Section
BOOTLOADER = atmel-dfu
# Build Options
# change yes to no to disable
#
BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000)
MOUSEKEY_ENABLE = no # Mouse keys(+4700)
EXTRAKEY_ENABLE = yes # Audio control and System control(+450)
CONSOLE_ENABLE = no # Console for debug(+400)
COMMAND_ENABLE = no # Commands for debug and configuration
# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
NKRO_ENABLE = yes # USB Nkey Rollover
BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality on B7 by default
MIDI_ENABLE = no # MIDI support (+2400 to 4200, depending on config)
UNICODE_ENABLE = no # Unicode
BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
AUDIO_ENABLE = no # Audio output on port C6
FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches
RAW_ENABLE = yes
DYNAMIC_KEYMAP_ENABLE = yes

49
keyboards/wilba_tech/wt60_d/rules.mk
View File

@ -1,50 +1,19 @@
# project specific files
SRC = keyboards/wilba_tech/wt_main.c
# MCU name
MCU = atmega32u4
# Processor frequency.
# This will define a symbol, F_CPU, in all source code files equal to the
# processor frequency in Hz. You can then use this symbol in your source code to
# calculate timings. Do NOT tack on a 'UL' at the end, this will be done
# automatically to create a 32-bit value in your source code.
#
# This will be an integer division of F_USB below, as it is sourced by
# F_USB after it has run through any CPU prescalers. Note that this value
# does not *change* the processor frequency - it should merely be updated to
# reflect the processor speed set externally so that the code can use accurate
# software delays.
F_CPU = 16000000
#
# LUFA specific
#
# Target architecture (see library "Board Types" documentation).
ARCH = AVR8
# Input clock frequency.
# This will define a symbol, F_USB, in all source code files equal to the
# input clock frequency (before any prescaling is performed) in Hz. This value may
# differ from F_CPU if prescaling is used on the latter, and is required as the
# raw input clock is fed directly to the PLL sections of the AVR for high speed
# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
# at the end, this will be done automatically to create a 32-bit value in your
# source code.
#
# If no clock division is performed on the input clock inside the AVR (via the
# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
F_USB = $(F_CPU)
# Interrupt driven control endpoint task(+60)
OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
# Boot Section
# Bootloader selection
# Teensy halfkay
# Pro Micro caterina
# Atmel DFU atmel-dfu
# LUFA DFU lufa-dfu
# QMK DFU qmk-dfu
# ATmega32A bootloadHID
# ATmega328P USBasp
BOOTLOADER = atmel-dfu
# Build Options
# change yes to no to disable
#

32
keyboards/wilba_tech/wt65_a/config.h
View File

@ -179,14 +179,30 @@
/* override number of MIDI tone keycodes (each octave adds 12 keycodes and allocates 12 bytes) */
//#define MIDI_TONE_KEYCODE_OCTAVES 1
#define WT_MONO_BACKLIGHT
// enable the mono backlight
#define MONO_BACKLIGHT_ENABLED 1
// disable backlight when USB suspended (PC sleep/hibernate/shutdown)
#define MONO_BACKLIGHT_DISABLE_WHEN_USB_SUSPENDED 0
// disable backlight after timeout in minutes, 0 = no timeout
#define MONO_BACKLIGHT_DISABLE_AFTER_TIMEOUT 0
// the default brightness
#define MONO_BACKLIGHT_BRIGHTNESS 255
// the default effect
#define MONO_BACKLIGHT_EFFECT 1
// the default effect speed (0-3)
#define MONO_BACKLIGHT_EFFECT_SPEED 0
#define DYNAMIC_KEYMAP_LAYER_COUNT 4
// EEPROM usage
// TODO: refactor with new user EEPROM code (coming soon)
#define EEPROM_MAGIC 0x451F
#define EEPROM_MAGIC 0x4520
#define EEPROM_MAGIC_ADDR 34
// Bump this every time we change what we store
// This will automatically reset the EEPROM with defaults
@ -194,9 +210,11 @@
#define EEPROM_VERSION 0x08
#define EEPROM_VERSION_ADDR 36
// Dynamic keymap starts after EEPROM version
#define DYNAMIC_KEYMAP_EEPROM_ADDR 37
// Dynamic macro starts after dynamic keymaps (37+(4*5*15*2)) = (37+600)
#define DYNAMIC_KEYMAP_MACRO_EEPROM_ADDR 637
#define DYNAMIC_KEYMAP_MACRO_EEPROM_SIZE 387
// Backlight config starts after EEPROM version
#define MONO_BACKLIGHT_CONFIG_EEPROM_ADDR 37
// Dynamic keymap starts after backlight config (37+7)
#define DYNAMIC_KEYMAP_EEPROM_ADDR 44
// Dynamic macro starts after dynamic keymaps (44+(4*5*15*2)) = (44+600)
#define DYNAMIC_KEYMAP_MACRO_EEPROM_ADDR 644
#define DYNAMIC_KEYMAP_MACRO_EEPROM_SIZE 380
#define DYNAMIC_KEYMAP_MACRO_COUNT 16

69
keyboards/wilba_tech/wt65_a/keymaps/via/rules.mk
View File

@ -1,71 +1,2 @@
# project specific files
SRC = drivers/issi/is31fl3736.c \
drivers/avr/i2c_master.c \
keyboards/wilba_tech/wt_mono_backlight.c \
keyboards/wilba_tech/wt_main.c
# MCU name
MCU = atmega32u4
# Processor frequency.
# This will define a symbol, F_CPU, in all source code files equal to the
# processor frequency in Hz. You can then use this symbol in your source code to
# calculate timings. Do NOT tack on a 'UL' at the end, this will be done
# automatically to create a 32-bit value in your source code.
#
# This will be an integer division of F_USB below, as it is sourced by
# F_USB after it has run through any CPU prescalers. Note that this value
# does not *change* the processor frequency - it should merely be updated to
# reflect the processor speed set externally so that the code can use accurate
# software delays.
F_CPU = 16000000
#
# LUFA specific
#
# Target architecture (see library "Board Types" documentation).
ARCH = AVR8
# Input clock frequency.
# This will define a symbol, F_USB, in all source code files equal to the
# input clock frequency (before any prescaling is performed) in Hz. This value may
# differ from F_CPU if prescaling is used on the latter, and is required as the
# raw input clock is fed directly to the PLL sections of the AVR for high speed
# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
# at the end, this will be done automatically to create a 32-bit value in your
# source code.
#
# If no clock division is performed on the input clock inside the AVR (via the
# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
F_USB = $(F_CPU)
# Interrupt driven control endpoint task(+60)
OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
# Boot Section
BOOTLOADER = atmel-dfu
# Build Options
# change yes to no to disable
#
BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000)
MOUSEKEY_ENABLE = no # Mouse keys(+4700)
EXTRAKEY_ENABLE = yes # Audio control and System control(+450)
CONSOLE_ENABLE = no # Console for debug(+400)
COMMAND_ENABLE = no # Commands for debug and configuration
# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
NKRO_ENABLE = yes # USB Nkey Rollover
BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality on B7 by default
MIDI_ENABLE = no # MIDI support (+2400 to 4200, depending on config)
UNICODE_ENABLE = no # Unicode
BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
AUDIO_ENABLE = no # Audio output on port C6
FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches
RAW_ENABLE = yes
DYNAMIC_KEYMAP_ENABLE = yes

47
keyboards/wilba_tech/wt65_a/rules.mk
View File

@ -1,50 +1,21 @@
# project specific files
SRC = drivers/issi/is31fl3736.c \
drivers/avr/i2c_master.c \
quantum/color.c \
keyboards/wilba_tech/wt_mono_backlight.c \
keyboards/wilba_tech/wt_main.c
# MCU name
MCU = atmega32u4
# Processor frequency.
# This will define a symbol, F_CPU, in all source code files equal to the
# processor frequency in Hz. You can then use this symbol in your source code to
# calculate timings. Do NOT tack on a 'UL' at the end, this will be done
# automatically to create a 32-bit value in your source code.
#
# This will be an integer division of F_USB below, as it is sourced by
# F_USB after it has run through any CPU prescalers. Note that this value
# does not *change* the processor frequency - it should merely be updated to
# reflect the processor speed set externally so that the code can use accurate
# software delays.
F_CPU = 16000000
#
# LUFA specific
#
# Target architecture (see library "Board Types" documentation).
ARCH = AVR8
# Input clock frequency.
# This will define a symbol, F_USB, in all source code files equal to the
# input clock frequency (before any prescaling is performed) in Hz. This value may
# differ from F_CPU if prescaling is used on the latter, and is required as the
# raw input clock is fed directly to the PLL sections of the AVR for high speed
# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
# at the end, this will be done automatically to create a 32-bit value in your
# source code.
#
# If no clock division is performed on the input clock inside the AVR (via the
# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
F_USB = $(F_CPU)
# Interrupt driven control endpoint task(+60)
OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
# Boot Section
# Bootloader selection
# Teensy halfkay
# Pro Micro caterina
# Atmel DFU atmel-dfu
# LUFA DFU lufa-dfu
# QMK DFU qmk-dfu
# ATmega32A bootloadHID
# ATmega328P USBasp
BOOTLOADER = atmel-dfu

32
keyboards/wilba_tech/wt65_b/config.h
View File

@ -179,14 +179,30 @@
/* override number of MIDI tone keycodes (each octave adds 12 keycodes and allocates 12 bytes) */
//#define MIDI_TONE_KEYCODE_OCTAVES 1
#define WT_MONO_BACKLIGHT
// enable the mono backlight
#define MONO_BACKLIGHT_ENABLED 1
// disable backlight when USB suspended (PC sleep/hibernate/shutdown)
#define MONO_BACKLIGHT_DISABLE_WHEN_USB_SUSPENDED 0
// disable backlight after timeout in minutes, 0 = no timeout
#define MONO_BACKLIGHT_DISABLE_AFTER_TIMEOUT 0
// the default brightness
#define MONO_BACKLIGHT_BRIGHTNESS 255
// the default effect
#define MONO_BACKLIGHT_EFFECT 1
// the default effect speed (0-3)
#define MONO_BACKLIGHT_EFFECT_SPEED 0
#define DYNAMIC_KEYMAP_LAYER_COUNT 4
// EEPROM usage
// TODO: refactor with new user EEPROM code (coming soon)
#define EEPROM_MAGIC 0x451F
#define EEPROM_MAGIC 0x4520
#define EEPROM_MAGIC_ADDR 34
// Bump this every time we change what we store
// This will automatically reset the EEPROM with defaults
@ -194,9 +210,11 @@
#define EEPROM_VERSION 0x08
#define EEPROM_VERSION_ADDR 36
// Dynamic keymap starts after EEPROM version
#define DYNAMIC_KEYMAP_EEPROM_ADDR 37
// Dynamic macro starts after dynamic keymaps (37+(4*5*15*2)) = (37+600)
#define DYNAMIC_KEYMAP_MACRO_EEPROM_ADDR 637
#define DYNAMIC_KEYMAP_MACRO_EEPROM_SIZE 387
// Backlight config starts after EEPROM version
#define MONO_BACKLIGHT_CONFIG_EEPROM_ADDR 37
// Dynamic keymap starts after backlight config (37+7)
#define DYNAMIC_KEYMAP_EEPROM_ADDR 44
// Dynamic macro starts after dynamic keymaps (44+(4*5*15*2)) = (44+600)
#define DYNAMIC_KEYMAP_MACRO_EEPROM_ADDR 644
#define DYNAMIC_KEYMAP_MACRO_EEPROM_SIZE 380
#define DYNAMIC_KEYMAP_MACRO_COUNT 16

69
keyboards/wilba_tech/wt65_b/keymaps/via/rules.mk
View File

@ -1,71 +1,2 @@
# project specific files
SRC = drivers/issi/is31fl3736.c \
drivers/avr/i2c_master.c \
keyboards/wilba_tech/wt_mono_backlight.c \
keyboards/wilba_tech/wt_main.c
# MCU name
MCU = atmega32u4
# Processor frequency.
# This will define a symbol, F_CPU, in all source code files equal to the
# processor frequency in Hz. You can then use this symbol in your source code to
# calculate timings. Do NOT tack on a 'UL' at the end, this will be done
# automatically to create a 32-bit value in your source code.
#
# This will be an integer division of F_USB below, as it is sourced by
# F_USB after it has run through any CPU prescalers. Note that this value
# does not *change* the processor frequency - it should merely be updated to
# reflect the processor speed set externally so that the code can use accurate
# software delays.
F_CPU = 16000000
#
# LUFA specific
#
# Target architecture (see library "Board Types" documentation).
ARCH = AVR8
# Input clock frequency.
# This will define a symbol, F_USB, in all source code files equal to the
# input clock frequency (before any prescaling is performed) in Hz. This value may
# differ from F_CPU if prescaling is used on the latter, and is required as the
# raw input clock is fed directly to the PLL sections of the AVR for high speed
# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
# at the end, this will be done automatically to create a 32-bit value in your
# source code.
#
# If no clock division is performed on the input clock inside the AVR (via the
# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
F_USB = $(F_CPU)
# Interrupt driven control endpoint task(+60)
OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
# Boot Section
BOOTLOADER = atmel-dfu
# Build Options
# change yes to no to disable
#
BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000)
MOUSEKEY_ENABLE = no # Mouse keys(+4700)
EXTRAKEY_ENABLE = yes # Audio control and System control(+450)
CONSOLE_ENABLE = no # Console for debug(+400)
COMMAND_ENABLE = no # Commands for debug and configuration
# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
NKRO_ENABLE = yes # USB Nkey Rollover
BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality on B7 by default
MIDI_ENABLE = no # MIDI support (+2400 to 4200, depending on config)
UNICODE_ENABLE = no # Unicode
BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
AUDIO_ENABLE = no # Audio output on port C6
FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches
RAW_ENABLE = yes
DYNAMIC_KEYMAP_ENABLE = yes

47
keyboards/wilba_tech/wt65_b/rules.mk
View File

@ -1,50 +1,21 @@
# project specific files
SRC = drivers/issi/is31fl3736.c \
drivers/avr/i2c_master.c \
quantum/color.c \
keyboards/wilba_tech/wt_mono_backlight.c \
keyboards/wilba_tech/wt_main.c
# MCU name
MCU = atmega32u4
# Processor frequency.
# This will define a symbol, F_CPU, in all source code files equal to the
# processor frequency in Hz. You can then use this symbol in your source code to
# calculate timings. Do NOT tack on a 'UL' at the end, this will be done
# automatically to create a 32-bit value in your source code.
#
# This will be an integer division of F_USB below, as it is sourced by
# F_USB after it has run through any CPU prescalers. Note that this value
# does not *change* the processor frequency - it should merely be updated to
# reflect the processor speed set externally so that the code can use accurate
# software delays.
F_CPU = 16000000
#
# LUFA specific
#
# Target architecture (see library "Board Types" documentation).
ARCH = AVR8
# Input clock frequency.
# This will define a symbol, F_USB, in all source code files equal to the
# input clock frequency (before any prescaling is performed) in Hz. This value may
# differ from F_CPU if prescaling is used on the latter, and is required as the
# raw input clock is fed directly to the PLL sections of the AVR for high speed
# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
# at the end, this will be done automatically to create a 32-bit value in your
# source code.
#
# If no clock division is performed on the input clock inside the AVR (via the
# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
F_USB = $(F_CPU)
# Interrupt driven control endpoint task(+60)
OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
# Boot Section
# Bootloader selection
# Teensy halfkay
# Pro Micro caterina
# Atmel DFU atmel-dfu
# LUFA DFU lufa-dfu
# QMK DFU qmk-dfu
# ATmega32A bootloadHID
# ATmega328P USBasp
BOOTLOADER = atmel-dfu

66
keyboards/wilba_tech/wt69_a/keymaps/via/rules.mk
View File

@ -1,68 +1,2 @@
# project specific files
SRC = keyboards/wilba_tech/wt_main.c
# MCU name
MCU = atmega32u4
# Processor frequency.
# This will define a symbol, F_CPU, in all source code files equal to the
# processor frequency in Hz. You can then use this symbol in your source code to
# calculate timings. Do NOT tack on a 'UL' at the end, this will be done
# automatically to create a 32-bit value in your source code.
#
# This will be an integer division of F_USB below, as it is sourced by
# F_USB after it has run through any CPU prescalers. Note that this value
# does not *change* the processor frequency - it should merely be updated to
# reflect the processor speed set externally so that the code can use accurate
# software delays.
F_CPU = 16000000
#
# LUFA specific
#
# Target architecture (see library "Board Types" documentation).
ARCH = AVR8
# Input clock frequency.
# This will define a symbol, F_USB, in all source code files equal to the
# input clock frequency (before any prescaling is performed) in Hz. This value may
# differ from F_CPU if prescaling is used on the latter, and is required as the
# raw input clock is fed directly to the PLL sections of the AVR for high speed
# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
# at the end, this will be done automatically to create a 32-bit value in your
# source code.
#
# If no clock division is performed on the input clock inside the AVR (via the
# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
F_USB = $(F_CPU)
# Interrupt driven control endpoint task(+60)
OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
# Boot Section
BOOTLOADER = atmel-dfu
# Build Options
# change yes to no to disable
#
BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000)
MOUSEKEY_ENABLE = no # Mouse keys(+4700)
EXTRAKEY_ENABLE = yes # Audio control and System control(+450)
CONSOLE_ENABLE = no # Console for debug(+400)
COMMAND_ENABLE = no # Commands for debug and configuration
# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
NKRO_ENABLE = yes # USB Nkey Rollover
BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality on B7 by default
MIDI_ENABLE = no # MIDI support (+2400 to 4200, depending on config)
UNICODE_ENABLE = no # Unicode
BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
AUDIO_ENABLE = no # Audio output on port C6
FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches
RAW_ENABLE = yes
DYNAMIC_KEYMAP_ENABLE = yes

48
keyboards/wilba_tech/wt69_a/rules.mk
View File

@ -1,47 +1,17 @@
# project specific files
SRC = keyboards/wilba_tech/wt_main.c
# MCU name
MCU = atmega32u4
# Processor frequency.
# This will define a symbol, F_CPU, in all source code files equal to the
# processor frequency in Hz. You can then use this symbol in your source code to
# calculate timings. Do NOT tack on a 'UL' at the end, this will be done
# automatically to create a 32-bit value in your source code.
#
# This will be an integer division of F_USB below, as it is sourced by
# F_USB after it has run through any CPU prescalers. Note that this value
# does not *change* the processor frequency - it should merely be updated to
# reflect the processor speed set externally so that the code can use accurate
# software delays.
F_CPU = 16000000
#
# LUFA specific
#
# Target architecture (see library "Board Types" documentation).
ARCH = AVR8
# Input clock frequency.
# This will define a symbol, F_USB, in all source code files equal to the
# input clock frequency (before any prescaling is performed) in Hz. This value may
# differ from F_CPU if prescaling is used on the latter, and is required as the
# raw input clock is fed directly to the PLL sections of the AVR for high speed
# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
# at the end, this will be done automatically to create a 32-bit value in your
# source code.
#
# If no clock division is performed on the input clock inside the AVR (via the
# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
F_USB = $(F_CPU)
# Interrupt driven control endpoint task(+60)
OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
# Boot Section
# Bootloader selection
# Teensy halfkay
# Pro Micro caterina
# Atmel DFU atmel-dfu
# LUFA DFU lufa-dfu
# QMK DFU qmk-dfu
# ATmega32A bootloadHID
# ATmega328P USBasp
BOOTLOADER = atmel-dfu

35
keyboards/wilba_tech/wt75_a/config.h
View File

@ -179,14 +179,33 @@
/* override number of MIDI tone keycodes (each octave adds 12 keycodes and allocates 12 bytes) */
//#define MIDI_TONE_KEYCODE_OCTAVES 1
#define WT_MONO_BACKLIGHT
// enable the mono backlight
#define MONO_BACKLIGHT_ENABLED 1
// enable the RGB indicator for WT75-A
#define MONO_BACKLIGHT_WT75_A
// disable backlight when USB suspended (PC sleep/hibernate/shutdown)
#define MONO_BACKLIGHT_DISABLE_WHEN_USB_SUSPENDED 0
// disable backlight after timeout in minutes, 0 = no timeout
#define MONO_BACKLIGHT_DISABLE_AFTER_TIMEOUT 0
// the default brightness
#define MONO_BACKLIGHT_BRIGHTNESS 255
// the default effect
#define MONO_BACKLIGHT_EFFECT 1
// the default effect speed (0-3)
#define MONO_BACKLIGHT_EFFECT_SPEED 0
#define DYNAMIC_KEYMAP_LAYER_COUNT 4
// EEPROM usage
// TODO: refactor with new user EEPROM code (coming soon)
#define EEPROM_MAGIC 0x451F
#define EEPROM_MAGIC 0x4520
#define EEPROM_MAGIC_ADDR 34
// Bump this every time we change what we store
// This will automatically reset the EEPROM with defaults
@ -194,9 +213,11 @@
#define EEPROM_VERSION 0x08
#define EEPROM_VERSION_ADDR 36
// Dynamic keymap starts after EEPROM version
#define DYNAMIC_KEYMAP_EEPROM_ADDR 37
// Dynamic macro starts after dynamic keymaps (37+(4*6*15*2)) = (37+720)
#define DYNAMIC_KEYMAP_MACRO_EEPROM_ADDR 757
#define DYNAMIC_KEYMAP_MACRO_EEPROM_SIZE 267
// Backlight config starts after EEPROM version
#define MONO_BACKLIGHT_CONFIG_EEPROM_ADDR 37
// Dynamic keymap starts after backlight config (37+7)
#define DYNAMIC_KEYMAP_EEPROM_ADDR 44
// Dynamic macro starts after dynamic keymaps (44+(4*6*15*2)) = (44+720)
#define DYNAMIC_KEYMAP_MACRO_EEPROM_ADDR 764
#define DYNAMIC_KEYMAP_MACRO_EEPROM_SIZE 260
#define DYNAMIC_KEYMAP_MACRO_COUNT 16

69
keyboards/wilba_tech/wt75_a/keymaps/via/rules.mk
View File

@ -1,71 +1,2 @@
# project specific files
SRC = drivers/issi/is31fl3736.c \
drivers/avr/i2c_master.c \
keyboards/wilba_tech/wt_mono_backlight.c \
keyboards/wilba_tech/wt_main.c
# MCU name
MCU = atmega32u4
# Processor frequency.
# This will define a symbol, F_CPU, in all source code files equal to the
# processor frequency in Hz. You can then use this symbol in your source code to
# calculate timings. Do NOT tack on a 'UL' at the end, this will be done
# automatically to create a 32-bit value in your source code.
#
# This will be an integer division of F_USB below, as it is sourced by
# F_USB after it has run through any CPU prescalers. Note that this value
# does not *change* the processor frequency - it should merely be updated to
# reflect the processor speed set externally so that the code can use accurate
# software delays.
F_CPU = 16000000
#
# LUFA specific
#
# Target architecture (see library "Board Types" documentation).
ARCH = AVR8
# Input clock frequency.
# This will define a symbol, F_USB, in all source code files equal to the
# input clock frequency (before any prescaling is performed) in Hz. This value may
# differ from F_CPU if prescaling is used on the latter, and is required as the
# raw input clock is fed directly to the PLL sections of the AVR for high speed
# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
# at the end, this will be done automatically to create a 32-bit value in your
# source code.
#
# If no clock division is performed on the input clock inside the AVR (via the
# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
F_USB = $(F_CPU)
# Interrupt driven control endpoint task(+60)
OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
# Boot Section
BOOTLOADER = atmel-dfu
# Build Options
# change yes to no to disable
#
BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000)
MOUSEKEY_ENABLE = no # Mouse keys(+4700)
EXTRAKEY_ENABLE = yes # Audio control and System control(+450)
CONSOLE_ENABLE = no # Console for debug(+400)
COMMAND_ENABLE = no # Commands for debug and configuration
# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
NKRO_ENABLE = yes # USB Nkey Rollover
BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality on B7 by default
MIDI_ENABLE = no # MIDI support (+2400 to 4200, depending on config)
UNICODE_ENABLE = no # Unicode
BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
AUDIO_ENABLE = no # Audio output on port C6
FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches
RAW_ENABLE = yes
DYNAMIC_KEYMAP_ENABLE = yes

47
keyboards/wilba_tech/wt75_a/rules.mk
View File

@ -1,50 +1,21 @@
# project specific files
SRC = drivers/issi/is31fl3736.c \
drivers/avr/i2c_master.c \
quantum/color.c \
keyboards/wilba_tech/wt_mono_backlight.c \
keyboards/wilba_tech/wt_main.c
# MCU name
MCU = atmega32u4
# Processor frequency.
# This will define a symbol, F_CPU, in all source code files equal to the
# processor frequency in Hz. You can then use this symbol in your source code to
# calculate timings. Do NOT tack on a 'UL' at the end, this will be done
# automatically to create a 32-bit value in your source code.
#
# This will be an integer division of F_USB below, as it is sourced by
# F_USB after it has run through any CPU prescalers. Note that this value
# does not *change* the processor frequency - it should merely be updated to
# reflect the processor speed set externally so that the code can use accurate
# software delays.
F_CPU = 16000000
#
# LUFA specific
#
# Target architecture (see library "Board Types" documentation).
ARCH = AVR8
# Input clock frequency.
# This will define a symbol, F_USB, in all source code files equal to the
# input clock frequency (before any prescaling is performed) in Hz. This value may
# differ from F_CPU if prescaling is used on the latter, and is required as the
# raw input clock is fed directly to the PLL sections of the AVR for high speed
# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
# at the end, this will be done automatically to create a 32-bit value in your
# source code.
#
# If no clock division is performed on the input clock inside the AVR (via the
# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
F_USB = $(F_CPU)
# Interrupt driven control endpoint task(+60)
OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
# Boot Section
# Bootloader selection
# Teensy halfkay
# Pro Micro caterina
# Atmel DFU atmel-dfu
# LUFA DFU lufa-dfu
# QMK DFU qmk-dfu
# ATmega32A bootloadHID
# ATmega328P USBasp
BOOTLOADER = atmel-dfu

35
keyboards/wilba_tech/wt75_b/config.h
View File

@ -179,14 +179,33 @@
/* override number of MIDI tone keycodes (each octave adds 12 keycodes and allocates 12 bytes) */
//#define MIDI_TONE_KEYCODE_OCTAVES 1
#define WT_MONO_BACKLIGHT
// enable the mono backlight
#define MONO_BACKLIGHT_ENABLED 1
// enable the RGB indicator for WT75-A
#define MONO_BACKLIGHT_WT75_A
// disable backlight when USB suspended (PC sleep/hibernate/shutdown)
#define MONO_BACKLIGHT_DISABLE_WHEN_USB_SUSPENDED 0
// disable backlight after timeout in minutes, 0 = no timeout
#define MONO_BACKLIGHT_DISABLE_AFTER_TIMEOUT 0
// the default brightness
#define MONO_BACKLIGHT_BRIGHTNESS 255
// the default effect
#define MONO_BACKLIGHT_EFFECT 1
// the default effect speed (0-3)
#define MONO_BACKLIGHT_EFFECT_SPEED 0
#define DYNAMIC_KEYMAP_LAYER_COUNT 4
// EEPROM usage
// TODO: refactor with new user EEPROM code (coming soon)
#define EEPROM_MAGIC 0x451F
#define EEPROM_MAGIC 0x4520
#define EEPROM_MAGIC_ADDR 34
// Bump this every time we change what we store
// This will automatically reset the EEPROM with defaults
@ -194,9 +213,11 @@
#define EEPROM_VERSION 0x08
#define EEPROM_VERSION_ADDR 36
// Dynamic keymap starts after EEPROM version
#define DYNAMIC_KEYMAP_EEPROM_ADDR 37
// Dynamic macro starts after dynamic keymaps (37+(4*6*16*2)) = (37+768)
#define DYNAMIC_KEYMAP_MACRO_EEPROM_ADDR 805
#define DYNAMIC_KEYMAP_MACRO_EEPROM_SIZE 219
// Backlight config starts after EEPROM version
#define MONO_BACKLIGHT_CONFIG_EEPROM_ADDR 37
// Dynamic keymap starts after backlight config (37+7)
#define DYNAMIC_KEYMAP_EEPROM_ADDR 44
// Dynamic macro starts after dynamic keymaps (44+(4*6*16*2)) = (44+768)
#define DYNAMIC_KEYMAP_MACRO_EEPROM_ADDR 812
#define DYNAMIC_KEYMAP_MACRO_EEPROM_SIZE 212
#define DYNAMIC_KEYMAP_MACRO_COUNT 16

69
keyboards/wilba_tech/wt75_b/keymaps/via/rules.mk
View File

@ -1,71 +1,2 @@
# project specific files
SRC = drivers/issi/is31fl3736.c \
drivers/avr/i2c_master.c \
keyboards/wilba_tech/wt_mono_backlight.c \
keyboards/wilba_tech/wt_main.c
# MCU name
MCU = atmega32u4
# Processor frequency.
# This will define a symbol, F_CPU, in all source code files equal to the
# processor frequency in Hz. You can then use this symbol in your source code to
# calculate timings. Do NOT tack on a 'UL' at the end, this will be done
# automatically to create a 32-bit value in your source code.
#
# This will be an integer division of F_USB below, as it is sourced by
# F_USB after it has run through any CPU prescalers. Note that this value
# does not *change* the processor frequency - it should merely be updated to
# reflect the processor speed set externally so that the code can use accurate
# software delays.
F_CPU = 16000000
#
# LUFA specific
#
# Target architecture (see library "Board Types" documentation).
ARCH = AVR8
# Input clock frequency.
# This will define a symbol, F_USB, in all source code files equal to the
# input clock frequency (before any prescaling is performed) in Hz. This value may
# differ from F_CPU if prescaling is used on the latter, and is required as the
# raw input clock is fed directly to the PLL sections of the AVR for high speed
# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
# at the end, this will be done automatically to create a 32-bit value in your
# source code.
#
# If no clock division is performed on the input clock inside the AVR (via the
# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
F_USB = $(F_CPU)
# Interrupt driven control endpoint task(+60)
OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
# Boot Section
BOOTLOADER = atmel-dfu
# Build Options
# change yes to no to disable
#
BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000)
MOUSEKEY_ENABLE = no # Mouse keys(+4700)
EXTRAKEY_ENABLE = yes # Audio control and System control(+450)
CONSOLE_ENABLE = no # Console for debug(+400)
COMMAND_ENABLE = no # Commands for debug and configuration
# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
NKRO_ENABLE = yes # USB Nkey Rollover
BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality on B7 by default
MIDI_ENABLE = no # MIDI support (+2400 to 4200, depending on config)
UNICODE_ENABLE = no # Unicode
BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
AUDIO_ENABLE = no # Audio output on port C6
FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches
RAW_ENABLE = yes
DYNAMIC_KEYMAP_ENABLE = yes

47
keyboards/wilba_tech/wt75_b/rules.mk
View File

@ -1,50 +1,21 @@
# project specific files
SRC = drivers/issi/is31fl3736.c \
drivers/avr/i2c_master.c \
quantum/color.c \
keyboards/wilba_tech/wt_mono_backlight.c \
keyboards/wilba_tech/wt_main.c
# MCU name
MCU = atmega32u4
# Processor frequency.
# This will define a symbol, F_CPU, in all source code files equal to the
# processor frequency in Hz. You can then use this symbol in your source code to
# calculate timings. Do NOT tack on a 'UL' at the end, this will be done
# automatically to create a 32-bit value in your source code.
#
# This will be an integer division of F_USB below, as it is sourced by
# F_USB after it has run through any CPU prescalers. Note that this value
# does not *change* the processor frequency - it should merely be updated to
# reflect the processor speed set externally so that the code can use accurate
# software delays.
F_CPU = 16000000
#
# LUFA specific
#
# Target architecture (see library "Board Types" documentation).
ARCH = AVR8
# Input clock frequency.
# This will define a symbol, F_USB, in all source code files equal to the
# input clock frequency (before any prescaling is performed) in Hz. This value may
# differ from F_CPU if prescaling is used on the latter, and is required as the
# raw input clock is fed directly to the PLL sections of the AVR for high speed
# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
# at the end, this will be done automatically to create a 32-bit value in your
# source code.
#
# If no clock division is performed on the input clock inside the AVR (via the
# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
F_USB = $(F_CPU)
# Interrupt driven control endpoint task(+60)
OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
# Boot Section
# Bootloader selection
# Teensy halfkay
# Pro Micro caterina
# Atmel DFU atmel-dfu
# LUFA DFU lufa-dfu
# QMK DFU qmk-dfu
# ATmega32A bootloadHID
# ATmega328P USBasp
BOOTLOADER = atmel-dfu

223
keyboards/wilba_tech/wt75_c/config.h Normal file
View File

@ -0,0 +1,223 @@
/* Copyright 2018 Jason Williams (Wilba)
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#pragma once
#include "config_common.h"
/* USB Device descriptor parameter */
#define VENDOR_ID 0x6582 // wilba.tech
#define PRODUCT_ID 0x075C // 75-C
#define DEVICE_VER 0x0001
#define MANUFACTURER wilba.tech
#define PRODUCT wilba.tech WT75-C
#define DESCRIPTION wilba.tech WT75-C
/* key matrix size */
#define MATRIX_ROWS 6
#define MATRIX_COLS 16
/*
* Keyboard Matrix Assignments
*
* Change this to how you wired your keyboard
* COLS: AVR pins used for columns, left to right
* ROWS: AVR pins used for rows, top to bottom
* DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
* ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
*
*/
#define MATRIX_ROW_PINS { F1, F0, E6, F4, F6, F7 }
#define MATRIX_COL_PINS { F5, D5, B1, B2, B3, D3, D2, C7, C6, B6, B5, B4, D7, D6, B7, D4 }
#define UNUSED_PINS
/* COL2ROW, ROW2COL */
#define DIODE_DIRECTION ROW2COL
// #define BACKLIGHT_PIN B7
// #define BACKLIGHT_BREATHING
// #define BACKLIGHT_LEVELS 3
/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
#define DEBOUNCE 5
/* define if matrix has ghost (lacks anti-ghosting diodes) */
//#define MATRIX_HAS_GHOST
/* number of backlight levels */
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
/* Locking resynchronize hack */
#define LOCKING_RESYNC_ENABLE
/* If defined, GRAVE_ESC will always act as ESC when CTRL is held.
* This is userful for the Windows task manager shortcut (ctrl+shift+esc).
*/
// #define GRAVE_ESC_CTRL_OVERRIDE
/*
* Force NKRO
*
* Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
* state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
* makefile for this to work.)
*
* If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
* until the next keyboard reset.
*
* NKRO may prevent your keystrokes from being detected in the BIOS, but it is
* fully operational during normal computer usage.
*
* For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
* or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
* bootmagic, NKRO mode will always be enabled until it is toggled again during a
* power-up.
*
*/
//#define FORCE_NKRO
/*
* Magic Key Options
*
* Magic keys are hotkey commands that allow control over firmware functions of
* the keyboard. They are best used in combination with the HID Listen program,
* found here: https://www.pjrc.com/teensy/hid_listen.html
*
* The options below allow the magic key functionality to be changed. This is
* useful if your keyboard/keypad is missing keys and you want magic key support.
*
*/
/* control how magic key switches layers */
//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS true
//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS true
//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false
/* override magic key keymap */
//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS
//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS
//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM
//#define MAGIC_KEY_HELP1 H
//#define MAGIC_KEY_HELP2 SLASH
//#define MAGIC_KEY_DEBUG D
//#define MAGIC_KEY_DEBUG_MATRIX X
//#define MAGIC_KEY_DEBUG_KBD K
//#define MAGIC_KEY_DEBUG_MOUSE M
//#define MAGIC_KEY_VERSION V
//#define MAGIC_KEY_STATUS S
//#define MAGIC_KEY_CONSOLE C
//#define MAGIC_KEY_LAYER0_ALT1 ESC
//#define MAGIC_KEY_LAYER0_ALT2 GRAVE
//#define MAGIC_KEY_LAYER0 0
//#define MAGIC_KEY_LAYER1 1
//#define MAGIC_KEY_LAYER2 2
//#define MAGIC_KEY_LAYER3 3
//#define MAGIC_KEY_LAYER4 4
//#define MAGIC_KEY_LAYER5 5
//#define MAGIC_KEY_LAYER6 6
//#define MAGIC_KEY_LAYER7 7
//#define MAGIC_KEY_LAYER8 8
//#define MAGIC_KEY_LAYER9 9
//#define MAGIC_KEY_BOOTLOADER PAUSE
//#define MAGIC_KEY_LOCK CAPS
//#define MAGIC_KEY_EEPROM E
//#define MAGIC_KEY_NKRO N
//#define MAGIC_KEY_SLEEP_LED Z
/*
* Feature disable options
* These options are also useful to firmware size reduction.
*/
/* disable debug print */
//#define NO_DEBUG
/* disable print */
//#define NO_PRINT
/* disable action features */
//#define NO_ACTION_LAYER
//#define NO_ACTION_TAPPING
//#define NO_ACTION_ONESHOT
//#define NO_ACTION_MACRO
//#define NO_ACTION_FUNCTION
/*
* MIDI options
*/
/* Prevent use of disabled MIDI features in the keymap */
//#define MIDI_ENABLE_STRICT 1
/* enable basic MIDI features:
- MIDI notes can be sent when in Music mode is on
*/
//#define MIDI_BASIC
/* enable advanced MIDI features:
- MIDI notes can be added to the keymap
- Octave shift and transpose
- Virtual sustain, portamento, and modulation wheel
- etc.
*/
//#define MIDI_ADVANCED
/* override number of MIDI tone keycodes (each octave adds 12 keycodes and allocates 12 bytes) */
//#define MIDI_TONE_KEYCODE_OCTAVES 1
// enable the mono backlight
#define MONO_BACKLIGHT_ENABLED 1
// enable the RGB indicator for WT75-A
#define MONO_BACKLIGHT_WT75_A
// disable backlight when USB suspended (PC sleep/hibernate/shutdown)
#define MONO_BACKLIGHT_DISABLE_WHEN_USB_SUSPENDED 0
// disable backlight after timeout in minutes, 0 = no timeout
#define MONO_BACKLIGHT_DISABLE_AFTER_TIMEOUT 0
// the default brightness
#define MONO_BACKLIGHT_BRIGHTNESS 255
// the default effect
#define MONO_BACKLIGHT_EFFECT 1
// the default effect speed (0-3)
#define MONO_BACKLIGHT_EFFECT_SPEED 0
#define DYNAMIC_KEYMAP_LAYER_COUNT 4
// EEPROM usage
// TODO: refactor with new user EEPROM code (coming soon)
#define EEPROM_MAGIC 0x4520
#define EEPROM_MAGIC_ADDR 34
// Bump this every time we change what we store
// This will automatically reset the EEPROM with defaults
// and avoid loading invalid data from the EEPROM
#define EEPROM_VERSION 0x08
#define EEPROM_VERSION_ADDR 36
// Backlight config starts after EEPROM version
#define MONO_BACKLIGHT_CONFIG_EEPROM_ADDR 37
// Dynamic keymap starts after backlight config (37+7)
#define DYNAMIC_KEYMAP_EEPROM_ADDR 44
// Dynamic macro starts after dynamic keymaps (44+(4*6*16*2)) = (44+768)
#define DYNAMIC_KEYMAP_MACRO_EEPROM_ADDR 812
#define DYNAMIC_KEYMAP_MACRO_EEPROM_SIZE 212
#define DYNAMIC_KEYMAP_MACRO_COUNT 16

12
keyboards/wilba_tech/wt75_c/info.json Normal file
View File

@ -0,0 +1,12 @@
{
"keyboard_name": "wilba.tech WT75-A",
"url": "https://wilba.tech",
"maintainer": "Wilba",
"width": 16.25,
"height": 6.5,
"layouts": {
"LAYOUT_all": {
"layout": [{"label":"0", "x":0, "y":0}, {"label":"1", "x":1.25, "y":0}, {"label":"2", "x":2.25, "y":0}, {"label":"3", "x":3.25, "y":0}, {"label":"4", "x":4.25, "y":0}, {"label":"5", "x":5.5, "y":0}, {"label":"6", "x":6.5, "y":0}, {"label":"7", "x":7.5, "y":0}, {"label":"8", "x":8.5, "y":0}, {"label":"9", "x":9.75, "y":0}, {"label":"10", "x":10.75, "y":0}, {"label":"11", "x":11.75, "y":0}, {"label":"12", "x":12.75, "y":0}, {"label":"13", "x":14, "y":0}, {"label":"14", "x":0, "y":1.25}, {"label":"15", "x":1, "y":1.25}, {"label":"16", "x":2, "y":1.25}, {"label":"17", "x":3, "y":1.25}, {"label":"18", "x":4, "y":1.25}, {"label":"19", "x":5, "y":1.25}, {"label":"20", "x":6, "y":1.25}, {"label":"21", "x":7, "y":1.25}, {"label":"22", "x":8, "y":1.25}, {"label":"23", "x":9, "y":1.25}, {"label":"24", "x":10, "y":1.25}, {"label":"25", "x":11, "y":1.25}, {"label":"26", "x":12, "y":1.25}, {"label":"27", "x":13, "y":1.25}, {"label":"28", "x":14, "y":1.25}, {"label":"29", "x":15.25, "y":1.25}, {"label":"30", "x":0, "y":2.25, "w":1.5}, {"label":"31", "x":1.5, "y":2.25}, {"label":"32", "x":2.5, "y":2.25}, {"label":"33", "x":3.5, "y":2.25}, {"label":"34", "x":4.5, "y":2.25}, {"label":"35", "x":5.5, "y":2.25}, {"label":"36", "x":6.5, "y":2.25}, {"label":"37", "x":7.5, "y":2.25}, {"label":"38", "x":8.5, "y":2.25}, {"label":"39", "x":9.5, "y":2.25}, {"label":"40", "x":10.5, "y":2.25}, {"label":"41", "x":11.5, "y":2.25}, {"label":"42", "x":12.5, "y":2.25}, {"label":"43", "x":13.5, "y":2.25, "w":1.5}, {"label":"44", "x":15.25, "y":2.25}, {"label":"45", "x":0, "y":3.25, "w":1.75}, {"label":"46", "x":1.75, "y":3.25}, {"label":"47", "x":2.75, "y":3.25}, {"label":"48", "x":3.75, "y":3.25}, {"label":"49", "x":4.75, "y":3.25}, {"label":"50", "x":5.75, "y":3.25}, {"label":"51", "x":6.75, "y":3.25}, {"label":"52", "x":7.75, "y":3.25}, {"label":"53", "x":8.75, "y":3.25}, {"label":"54", "x":9.75, "y":3.25}, {"label":"55", "x":10.75, "y":3.25}, {"label":"56", "x":11.75, "y":3.25}, {"label":"57", "x":12.75, "y":3.25, "w":2.25}, {"label":"58", "x":15.25, "y":3.25}, {"label":"59", "x":0, "y":4.25, "w":2.25}, {"label":"60", "x":2.25, "y":4.25}, {"label":"61", "x":3.25, "y":4.25}, {"label":"62", "x":4.25, "y":4.25}, {"label":"63", "x":5.25, "y":4.25}, {"label":"64", "x":6.25, "y":4.25}, {"label":"65", "x":7.25, "y":4.25}, {"label":"66", "x":8.25, "y":4.25}, {"label":"67", "x":9.25, "y":4.25}, {"label":"68", "x":10.25, "y":4.25}, {"label":"69", "x":11.25, "y":4.25}, {"label":"70", "x":12.25, "y":4.25, "w":1.75}, {"label":"71", "x":14.25, "y":4.5}, {"label":"72", "x":0, "y":5.25, "w":1.5}, {"label":"73", "x":1.5, "y":5.25}, {"label":"74", "x":2.5, "y":5.25, "w":1.5}, {"label":"75", "x":4, "y":5.25, "w":6}, {"label":"76", "x":10, "y":5.25, "w":1.5}, {"label":"77", "x":11.5, "y":5.25, "w":1.5}, {"label":"78", "x":13.25, "y":5.5}, {"label":"79", "x":14.25, "y":5.5}, {"label":"80", "x":15.25, "y":5.5}]
}
}
}

41
keyboards/wilba_tech/wt75_c/keymaps/default/keymap.c Normal file
View File

@ -0,0 +1,41 @@
#include QMK_KEYBOARD_H
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
// Default layer
[0] = LAYOUT_all(
KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_PSCR,
KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_BSPC, KC_DEL,
KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_PGUP,
KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, KC_PGDN,
KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP,
KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, MO(1), KC_LEFT, KC_DOWN, KC_RGHT),
// Fn1 Layer
[1] = LAYOUT_all(
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS),
// Fn2 Layer
[2] = LAYOUT_all(
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS),
// Fn3 Layer
[3] = LAYOUT_all(
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS),
};

41
keyboards/wilba_tech/wt75_c/keymaps/via/keymap.c Normal file
View File

@ -0,0 +1,41 @@
#include QMK_KEYBOARD_H
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
// Default layer
[0] = LAYOUT_all(
KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_PSCR,
KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_BSPC, KC_DEL,
KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_PGUP,
KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, KC_PGDN,
KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP,
KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, MO(1), KC_LEFT, KC_DOWN, KC_RGHT),
// Fn1 Layer
[1] = LAYOUT_all(
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS),
// Fn2 Layer
[2] = LAYOUT_all(
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS),
// Fn3 Layer
[3] = LAYOUT_all(
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS),
};

2
keyboards/wilba_tech/wt75_c/keymaps/via/rules.mk Normal file
View File

@ -0,0 +1,2 @@
RAW_ENABLE = yes
DYNAMIC_KEYMAP_ENABLE = yes

13
keyboards/wilba_tech/wt75_c/readme.md Normal file
View File

@ -0,0 +1,13 @@
# wilba.tech WT75-C
WT75-C is a keyboard PCB supporting 75% layout with offset arrow keys. [More info at wilba.tech](https://wilba.tech/)
Keyboard Maintainer: [Wilba6582](https://github.com/Wilba6582)
Hardware Supported: wilba.tech WT75-C
Hardware Availability: Custom keyboard group buys
Make example for this keyboard (after setting up your build environment):
make wilba_tech/wt75_c:default
See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).

39
keyboards/wilba_tech/wt75_c/rules.mk Normal file
View File

@ -0,0 +1,39 @@
# project specific files
SRC = drivers/issi/is31fl3736.c \
drivers/avr/i2c_master.c \
quantum/color.c \
keyboards/wilba_tech/wt_mono_backlight.c \
keyboards/wilba_tech/wt_main.c
# MCU name
MCU = atmega32u4
# Bootloader selection
# Teensy halfkay
# Pro Micro caterina
# Atmel DFU atmel-dfu
# LUFA DFU lufa-dfu
# QMK DFU qmk-dfu
# ATmega32A bootloadHID
# ATmega328P USBasp
BOOTLOADER = atmel-dfu
# Build Options
# change yes to no to disable
#
BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000)
MOUSEKEY_ENABLE = no # Mouse keys(+4700)
EXTRAKEY_ENABLE = yes # Audio control and System control(+450)
CONSOLE_ENABLE = no # Console for debug(+400)
COMMAND_ENABLE = no # Commands for debug and configuration
# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
NKRO_ENABLE = yes # USB Nkey Rollover
BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality on B7 by default
MIDI_ENABLE = no # MIDI support (+2400 to 4200, depending on config)
UNICODE_ENABLE = no # Unicode
BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
AUDIO_ENABLE = no # Audio output on port C6
FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches

17
keyboards/wilba_tech/wt75_c/wt75_c.c Normal file
View File

@ -0,0 +1,17 @@
/* Copyright 2018 Jason Williams (Wilba)
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
// Nothing to see here, move along... ;-)

46
keyboards/wilba_tech/wt75_c/wt75_c.h Normal file
View File

@ -0,0 +1,46 @@
/* Copyright 2018 Jason Williams (Wilba)
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#pragma once
#include "quantum.h"
#define ____ KC_NO
// Right switch of split backspace is at 2,13 and is the only switch
// whose physical position doesn't match switch matrix position :-(
// However, it also makes no sense to view the physical as 16 columns,
// so the numbering goes 00 to 14. Deal with it.
//
// 0,15 exists on PCB but is blocked by the 7V blocker so until someone
// designs a case that uses it, we can just forget it exists.
#define LAYOUT_all( \
K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012, K014, \
K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, K113, K114, K115, \
K200, K201, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212, K213, K215, \
K300, K301, K302, K303, K304, K305, K306, K307, K308, K309, K310, K311, K312, K315, \
K400, K402, K403, K404, K405, K406, K407, K408, K409, K410, K411, K412, K413, \
K500, K501, K502, K506, K510, K511, K512, K513, K515 \
) { \
{ K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012, ____, K014, ____ }, \
{ K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, K113, K114, K115 }, \
{ K200, K201, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212, K213, ____, K215 }, \
{ K300, K301, K302, K303, K304, K305, K306, K307, K308, K309, K310, K311, K312, ____, ____, K315 }, \
{ K400, ____, K402, K403, K404, K405, K406, K407, K408, K409, K410, K411, K412, K413, ____, ____ }, \
{ K500, K501, K502, ____, ____, ____, K506, ____, ____, ____, K510, K511, K512, K513, ____, K515 } \
}

32
keyboards/wilba_tech/wt80_a/config.h
View File

@ -179,14 +179,30 @@
/* override number of MIDI tone keycodes (each octave adds 12 keycodes and allocates 12 bytes) */
//#define MIDI_TONE_KEYCODE_OCTAVES 1
#define WT_MONO_BACKLIGHT
// enable the mono backlight
#define MONO_BACKLIGHT_ENABLED 1
// disable backlight when USB suspended (PC sleep/hibernate/shutdown)
#define MONO_BACKLIGHT_DISABLE_WHEN_USB_SUSPENDED 0
// disable backlight after timeout in minutes, 0 = no timeout
#define MONO_BACKLIGHT_DISABLE_AFTER_TIMEOUT 0
// the default brightness
#define MONO_BACKLIGHT_BRIGHTNESS 255
// the default effect
#define MONO_BACKLIGHT_EFFECT 1
// the default effect speed (0-3)
#define MONO_BACKLIGHT_EFFECT_SPEED 0
#define DYNAMIC_KEYMAP_LAYER_COUNT 4
// EEPROM usage
// TODO: refactor with new user EEPROM code (coming soon)
#define EEPROM_MAGIC 0x451F
#define EEPROM_MAGIC 0x4520
#define EEPROM_MAGIC_ADDR 34
// Bump this every time we change what we store
// This will automatically reset the EEPROM with defaults
@ -194,9 +210,11 @@
#define EEPROM_VERSION 0x08
#define EEPROM_VERSION_ADDR 36
// Dynamic keymap starts after EEPROM version
#define DYNAMIC_KEYMAP_EEPROM_ADDR 37
// Dynamic macro starts after dynamic keymaps (37+(4*6*17*2)) = (37+816)
#define DYNAMIC_KEYMAP_MACRO_EEPROM_ADDR 853
#define DYNAMIC_KEYMAP_MACRO_EEPROM_SIZE 171
// Backlight config starts after EEPROM version
#define MONO_BACKLIGHT_CONFIG_EEPROM_ADDR 37
// Dynamic keymap starts after backlight config (37+7)
#define DYNAMIC_KEYMAP_EEPROM_ADDR 44
// Dynamic macro starts after dynamic keymaps (44+(4*6*17*2)) = (44+816)
#define DYNAMIC_KEYMAP_MACRO_EEPROM_ADDR 860
#define DYNAMIC_KEYMAP_MACRO_EEPROM_SIZE 164
#define DYNAMIC_KEYMAP_MACRO_COUNT 16

69
keyboards/wilba_tech/wt80_a/keymaps/via/rules.mk
View File

@ -1,71 +1,2 @@
# project specific files
SRC = drivers/issi/is31fl3736.c \
drivers/avr/i2c_master.c \
keyboards/wilba_tech/wt_mono_backlight.c \
keyboards/wilba_tech/wt_main.c
# MCU name
MCU = atmega32u4
# Processor frequency.
# This will define a symbol, F_CPU, in all source code files equal to the
# processor frequency in Hz. You can then use this symbol in your source code to
# calculate timings. Do NOT tack on a 'UL' at the end, this will be done
# automatically to create a 32-bit value in your source code.
#
# This will be an integer division of F_USB below, as it is sourced by
# F_USB after it has run through any CPU prescalers. Note that this value
# does not *change* the processor frequency - it should merely be updated to
# reflect the processor speed set externally so that the code can use accurate
# software delays.
F_CPU = 16000000
#
# LUFA specific
#
# Target architecture (see library "Board Types" documentation).
ARCH = AVR8
# Input clock frequency.
# This will define a symbol, F_USB, in all source code files equal to the
# input clock frequency (before any prescaling is performed) in Hz. This value may
# differ from F_CPU if prescaling is used on the latter, and is required as the
# raw input clock is fed directly to the PLL sections of the AVR for high speed
# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
# at the end, this will be done automatically to create a 32-bit value in your
# source code.
#
# If no clock division is performed on the input clock inside the AVR (via the
# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
F_USB = $(F_CPU)
# Interrupt driven control endpoint task(+60)
OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
# Boot Section
BOOTLOADER = atmel-dfu
# Build Options
# change yes to no to disable
#
BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000)
MOUSEKEY_ENABLE = no # Mouse keys(+4700)
EXTRAKEY_ENABLE = yes # Audio control and System control(+450)
CONSOLE_ENABLE = no # Console for debug(+400)
COMMAND_ENABLE = no # Commands for debug and configuration
# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
NKRO_ENABLE = yes # USB Nkey Rollover
BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality on B7 by default
MIDI_ENABLE = no # MIDI support (+2400 to 4200, depending on config)
UNICODE_ENABLE = no # Unicode
BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
AUDIO_ENABLE = no # Audio output on port C6
FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches
RAW_ENABLE = yes
DYNAMIC_KEYMAP_ENABLE = yes

47
keyboards/wilba_tech/wt80_a/rules.mk
View File

@ -1,50 +1,21 @@
# project specific files
SRC = drivers/issi/is31fl3736.c \
drivers/avr/i2c_master.c \
quantum/color.c \
keyboards/wilba_tech/wt_mono_backlight.c \
keyboards/wilba_tech/wt_main.c
# MCU name
MCU = atmega32u4
# Processor frequency.
# This will define a symbol, F_CPU, in all source code files equal to the
# processor frequency in Hz. You can then use this symbol in your source code to
# calculate timings. Do NOT tack on a 'UL' at the end, this will be done
# automatically to create a 32-bit value in your source code.
#
# This will be an integer division of F_USB below, as it is sourced by
# F_USB after it has run through any CPU prescalers. Note that this value
# does not *change* the processor frequency - it should merely be updated to
# reflect the processor speed set externally so that the code can use accurate
# software delays.
F_CPU = 16000000
#
# LUFA specific
#
# Target architecture (see library "Board Types" documentation).
ARCH = AVR8
# Input clock frequency.
# This will define a symbol, F_USB, in all source code files equal to the
# input clock frequency (before any prescaling is performed) in Hz. This value may
# differ from F_CPU if prescaling is used on the latter, and is required as the
# raw input clock is fed directly to the PLL sections of the AVR for high speed
# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
# at the end, this will be done automatically to create a 32-bit value in your
# source code.
#
# If no clock division is performed on the input clock inside the AVR (via the
# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
F_USB = $(F_CPU)
# Interrupt driven control endpoint task(+60)
OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
# Boot Section
# Bootloader selection
# Teensy halfkay
# Pro Micro caterina
# Atmel DFU atmel-dfu
# LUFA DFU lufa-dfu
# QMK DFU qmk-dfu
# ATmega32A bootloadHID
# ATmega328P USBasp
BOOTLOADER = atmel-dfu

49
keyboards/wilba_tech/wt8_a/rules.mk
View File

@ -1,50 +1,19 @@
# project specific files
SRC = keyboards/wilba_tech/wt_main.c
# MCU name
MCU = atmega32u4
# Processor frequency.
# This will define a symbol, F_CPU, in all source code files equal to the
# processor frequency in Hz. You can then use this symbol in your source code to
# calculate timings. Do NOT tack on a 'UL' at the end, this will be done
# automatically to create a 32-bit value in your source code.
#
# This will be an integer division of F_USB below, as it is sourced by
# F_USB after it has run through any CPU prescalers. Note that this value
# does not *change* the processor frequency - it should merely be updated to
# reflect the processor speed set externally so that the code can use accurate
# software delays.
F_CPU = 16000000
#
# LUFA specific
#
# Target architecture (see library "Board Types" documentation).
ARCH = AVR8
# Input clock frequency.
# This will define a symbol, F_USB, in all source code files equal to the
# input clock frequency (before any prescaling is performed) in Hz. This value may
# differ from F_CPU if prescaling is used on the latter, and is required as the
# raw input clock is fed directly to the PLL sections of the AVR for high speed
# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
# at the end, this will be done automatically to create a 32-bit value in your
# source code.
#
# If no clock division is performed on the input clock inside the AVR (via the
# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
F_USB = $(F_CPU)
# Interrupt driven control endpoint task(+60)
OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
# Boot Section
# Bootloader selection
# Teensy halfkay
# Pro Micro caterina
# Atmel DFU atmel-dfu
# LUFA DFU lufa-dfu
# QMK DFU qmk-dfu
# ATmega32A bootloadHID
# ATmega328P USBasp
BOOTLOADER = atmel-dfu
# Build Options
# change yes to no to disable
#

54
keyboards/wilba_tech/wt_main.c
View File

@ -20,9 +20,9 @@
#if RGB_BACKLIGHT_ENABLED
#include "keyboards/wilba_tech/wt_rgb_backlight.h"
#endif // RGB_BACKLIGHT_ENABLED
#ifdef WT_MONO_BACKLIGHT
#if MONO_BACKLIGHT_ENABLED
#include "keyboards/wilba_tech/wt_mono_backlight.h"
#endif // WT_MONO_BACKLIGHT
#endif // MONO_BACKLIGHT_ENABLED
#include "keyboards/wilba_tech/via_api.h" // Temporary hack
#include "keyboards/wilba_tech/via_keycodes.h" // Temporary hack
@ -150,7 +150,7 @@ void raw_hid_receive( uint8_t *data, uint8_t length )
break;
}
#endif // DYNAMIC_KEYMAP_ENABLE
#if RGB_BACKLIGHT_ENABLED
#if RGB_BACKLIGHT_ENABLED || MONO_BACKLIGHT_ENABLED
case id_backlight_config_set_value:
{
backlight_config_set_value(command_data);
@ -166,7 +166,7 @@ void raw_hid_receive( uint8_t *data, uint8_t length )
backlight_config_save();
break;
}
#endif // RGB_BACKLIGHT_ENABLED
#endif // RGB_BACKLIGHT_ENABLED || MONO_BACKLIGHT_ENABLED
case id_eeprom_reset:
{
eeprom_reset();
@ -202,16 +202,16 @@ void main_init(void)
// If the EEPROM has the magic, the data is good.
// OK to load from EEPROM.
if (eeprom_is_valid()) {
#if RGB_BACKLIGHT_ENABLED
#if RGB_BACKLIGHT_ENABLED || MONO_BACKLIGHT_ENABLED
backlight_config_load();
#endif // RGB_BACKLIGHT_ENABLED
#endif // RGB_BACKLIGHT_ENABLED || MONO_BACKLIGHT_ENABLED
} else {
#if RGB_BACKLIGHT_ENABLED
#if RGB_BACKLIGHT_ENABLED || MONO_BACKLIGHT_ENABLED
// If the EEPROM has not been saved before, or is out of date,
// save the default values to the EEPROM. Default values
// come from construction of the zeal_backlight_config instance.
// come from construction of the backlight_config instance.
backlight_config_save();
#endif // RGB_BACKLIGHT_ENABLED
#endif // RGB_BACKLIGHT_ENABLED || MONO_BACKLIGHT_ENABLED
#ifdef DYNAMIC_KEYMAP_ENABLE
// This resets the keymaps in EEPROM to what is in flash.
dynamic_keymap_reset();
@ -222,20 +222,13 @@ void main_init(void)
eeprom_set_valid(true);
}
#if RGB_BACKLIGHT_ENABLED
#if RGB_BACKLIGHT_ENABLED || MONO_BACKLIGHT_ENABLED
// Initialize LED drivers for backlight.
backlight_init_drivers();
backlight_timer_init();
backlight_timer_enable();
#endif // RGB_BACKLIGHT_ENABLED
#ifdef WT_MONO_BACKLIGHT
// Initialize LED drivers for backlight.
backlight_init_drivers();
backlight_timer_init();
backlight_timer_enable();
#endif // WT_MONO_BACKLIGHT
#endif // RGB_BACKLIGHT_ENABLED || MONO_BACKLIGHT_ENABLED
}
void bootmagic_lite(void)
@ -267,22 +260,18 @@ void matrix_init_kb(void)
void matrix_scan_kb(void)
{
#if RGB_BACKLIGHT_ENABLED
#if RGB_BACKLIGHT_ENABLED || MONO_BACKLIGHT_ENABLED
// This only updates the LED driver buffers if something has changed.
backlight_update_pwm_buffers();
#endif // RGB_BACKLIGHT_ENABLED
#ifdef WT_MONO_BACKLIGHT
// This only updates the LED driver buffers if something has changed.
backlight_update_pwm_buffers();
#endif
#endif // RGB_BACKLIGHT_ENABLED || MONO_BACKLIGHT_ENABLED
matrix_scan_user();
}
bool process_record_kb(uint16_t keycode, keyrecord_t *record)
{
#if RGB_BACKLIGHT_ENABLED
#if RGB_BACKLIGHT_ENABLED || MONO_BACKLIGHT_ENABLED
process_record_backlight(keycode, record);
#endif // RGB_BACKLIGHT_ENABLED
#endif // RGB_BACKLIGHT_ENABLED || MONO_BACKLIGHT_ENABLED
switch(keycode) {
case FN_MO13:
@ -372,22 +361,23 @@ void action_function(keyrecord_t *record, uint8_t id, uint8_t opt)
void led_set_kb(uint8_t usb_led)
{
#if RGB_BACKLIGHT_ENABLED
#if RGB_BACKLIGHT_ENABLED || MONO_BACKLIGHT_ENABLED
backlight_set_indicator_state(usb_led);
#endif // RGB_BACKLIGHT_ENABLED
#endif // RGB_BACKLIGHT_ENABLED || MONO_BACKLIGHT_ENABLED
led_set_user(usb_led);
}
void suspend_power_down_kb(void)
{
#if RGB_BACKLIGHT_ENABLED
#if RGB_BACKLIGHT_ENABLED || MONO_BACKLIGHT_ENABLED
backlight_set_suspend_state(true);
#endif // RGB_BACKLIGHT_ENABLED
#endif // RGB_BACKLIGHT_ENABLED || MONO_BACKLIGHT_ENABLED
}
void suspend_wakeup_init_kb(void)
{
#if RGB_BACKLIGHT_ENABLED
#if RGB_BACKLIGHT_ENABLED || MONO_BACKLIGHT_ENABLED
backlight_set_suspend_state(false);
#endif // RGB_BACKLIGHT_ENABLED
#endif // RGB_BACKLIGHT_ENABLED || MONO_BACKLIGHT_ENABLED
}

341
keyboards/wilba_tech/wt_mono_backlight.c
View File

@ -14,20 +14,43 @@
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#include "quantum.h"
#include "wt_mono_backlight.h"
#include "wt_rgb_backlight_api.h" // reuse these for now
#include "wt_rgb_backlight_keycodes.h" // reuse these for now
#include "drivers/avr/i2c_master.h"
#include "drivers/issi/is31fl3736.h"
#include <avr/interrupt.h>
#include "progmem.h"
#include "quantum/color.h"
#define ISSI_ADDR_DEFAULT 0x50
#define BACKLIGHT_EFFECT_MAX 3
#ifndef MONO_BACKLIGHT_COLOR_1
#define MONO_BACKLIGHT_COLOR_1 { .h = 0, .s = 255 }
#endif
backlight_config g_config = {
.disable_when_usb_suspended = MONO_BACKLIGHT_DISABLE_WHEN_USB_SUSPENDED,
.disable_after_timeout = MONO_BACKLIGHT_DISABLE_AFTER_TIMEOUT,
.brightness = MONO_BACKLIGHT_BRIGHTNESS,
.effect = MONO_BACKLIGHT_EFFECT,
.effect_speed = MONO_BACKLIGHT_EFFECT_SPEED,
.color_1 = MONO_BACKLIGHT_COLOR_1,
};
bool g_suspend_state = false;
uint8_t g_indicator_state = 0;
// Global tick at 20 Hz
uint32_t g_tick = 0;
uint8_t g_config_effect_speed = 0;
uint8_t g_config_brightness = 255;
// Ticks since any key was last hit.
uint32_t g_any_key_hit = 0;
void backlight_init_drivers(void)
{
@ -41,6 +64,10 @@ void backlight_init_drivers(void)
IS31FL3736_update_led_control_registers( ISSI_ADDR_DEFAULT, 0x00 );
}
void backlight_set_key_hit(uint8_t row, uint8_t column)
{
g_any_key_hit = 0;
}
// This is (F_CPU/1024) / 20 Hz
// = 15625 Hz / 20 Hz
@ -82,13 +109,63 @@ void backlight_set_suspend_state(bool state)
g_suspend_state = state;
}
void backlight_set_indicator_state(uint8_t state)
{
g_indicator_state = state;
}
void backlight_set_brightness_all( uint8_t value )
{
IS31FL3736_mono_set_brightness_all( value );
}
void backlight_effect_all_off(void)
{
IS31FL3736_mono_set_brightness_all( 0 );
}
void backlight_effect_all_on(void)
{
IS31FL3736_mono_set_brightness_all( g_config.brightness );
}
void backlight_effect_raindrops(bool initialize)
{
// Change one LED every tick
uint8_t led_to_change = ( g_tick & 0x000 ) == 0 ? rand() % 96 : 255;
for ( int i=0; i<96; i++ )
{
// If initialize, all get set to random brightness
// If not, all but one will stay the same as before.
if ( initialize || i == led_to_change )
{
IS31FL3736_mono_set_brightness(i, rand() & 0xFF );
}
}
}
void backlight_effect_cycle_all(void)
{
uint8_t offset = ( g_tick << g_config_effect_speed ) & 0xFF;
uint8_t offset = ( g_tick << g_config.effect_speed ) & 0xFF;
backlight_set_brightness_all( offset );
}
// This runs after another backlight effect and replaces
// colors already set
void backlight_effect_indicators(void)
{
#if defined(MONO_BACKLIGHT_WT75_A)
HSV hsv = { .h = g_config.color_1.h, .s = g_config.color_1.s, .v = g_config.brightness };
RGB rgb = hsv_to_rgb( hsv );
// G8, H8, I8 -> (6*8+7) (7*8+7), (8*8+7)
IS31FL3736_mono_set_brightness(55, rgb.r);
IS31FL3736_mono_set_brightness(63, rgb.g);
IS31FL3736_mono_set_brightness(71, rgb.b);
#endif // MONO_BACKLIGHT_WT75_A
}
ISR(TIMER3_COMPA_vect)
{
// delay 1 second before driving LEDs or doing anything else
@ -100,8 +177,154 @@ ISR(TIMER3_COMPA_vect)
g_tick++;
//backlight_effect_cycle_all();
backlight_set_brightness_all( 255 );
if ( g_any_key_hit < 0xFFFFFFFF )
{
g_any_key_hit++;
}
// Ideally we would also stop sending zeros to the LED driver PWM buffers
// while suspended and just do a software shutdown. This is a cheap hack for now.
bool suspend_backlight = ((g_suspend_state && g_config.disable_when_usb_suspended) ||
(g_config.disable_after_timeout > 0 && g_any_key_hit > g_config.disable_after_timeout * 60 * 20));
uint8_t effect = suspend_backlight ? 0 : g_config.effect;
// Keep track of the effect used last time,
// detect change in effect, so each effect can
// have an optional initialization.
static uint8_t effect_last = 255;
bool initialize = effect != effect_last;
effect_last = effect;
// this gets ticked at 20 Hz.
// each effect can opt to do calculations
// and/or request PWM buffer updates.
switch ( effect )
{
case 0:
backlight_effect_all_off();
break;
case 1:
backlight_effect_all_on();;
break;
case 2:
backlight_effect_raindrops(initialize);
break;
default:
backlight_effect_all_off();
break;
}
if ( ! suspend_backlight )
{
backlight_effect_indicators();
}
}
// Some helpers for setting/getting HSV
void _set_color( HS *color, uint8_t *data )
{
color->h = data[0];
color->s = data[1];
}
void _get_color( HS *color, uint8_t *data )
{
data[0] = color->h;
data[1] = color->s;
}
void backlight_config_set_value( uint8_t *data )
{
bool reinitialize = false;
uint8_t *value_id = &(data[0]);
uint8_t *value_data = &(data[1]);
switch ( *value_id )
{
case id_disable_when_usb_suspended:
{
g_config.disable_when_usb_suspended = (bool)*value_data;
break;
}
case id_disable_after_timeout:
{
g_config.disable_after_timeout = *value_data;
break;
}
case id_brightness:
{
g_config.brightness = *value_data;
break;
}
case id_effect:
{
g_config.effect = *value_data;
break;
}
case id_effect_speed:
{
g_config.effect_speed = *value_data;
break;
}
case id_color_1:
{
_set_color( &(g_config.color_1), value_data );
break;
}
}
if ( reinitialize )
{
backlight_init_drivers();
}
}
void backlight_config_get_value( uint8_t *data )
{
uint8_t *value_id = &(data[0]);
uint8_t *value_data = &(data[1]);
switch ( *value_id )
{
case id_disable_when_usb_suspended:
{
*value_data = ( g_config.disable_when_usb_suspended ? 1 : 0 );
break;
}
case id_disable_after_timeout:
{
*value_data = g_config.disable_after_timeout;
break;
}
case id_brightness:
{
*value_data = g_config.brightness;
break;
}
case id_effect:
{
*value_data = g_config.effect;
break;
}
case id_effect_speed:
{
*value_data = g_config.effect_speed;
break;
}
case id_color_1:
{
_get_color( &(g_config.color_1), value_data );
break;
}
}
}
void backlight_config_load(void)
{
eeprom_read_block( &g_config, ((void*)MONO_BACKLIGHT_CONFIG_EEPROM_ADDR), sizeof(backlight_config) );
}
void backlight_config_save(void)
{
eeprom_update_block( &g_config, ((void*)MONO_BACKLIGHT_CONFIG_EEPROM_ADDR), sizeof(backlight_config) );
}
void backlight_update_pwm_buffers(void)
@ -109,8 +332,110 @@ void backlight_update_pwm_buffers(void)
IS31FL3736_update_pwm_buffers(ISSI_ADDR_DEFAULT,0x00);
}
void backlight_set_brightness_all( uint8_t value )
bool process_record_backlight(uint16_t keycode, keyrecord_t *record)
{
IS31FL3736_mono_set_brightness_all( value );
// Record keypresses for backlight effects
if ( record->event.pressed )
{
backlight_set_key_hit( record->event.key.row, record->event.key.col );
}
switch(keycode)
{
case BR_INC:
if (record->event.pressed)
{
backlight_brightness_increase();
}
return false;
break;
case BR_DEC:
if (record->event.pressed)
{
backlight_brightness_decrease();
}
return false;
break;
case EF_INC:
if (record->event.pressed)
{
backlight_effect_increase();
}
return false;
break;
case EF_DEC:
if (record->event.pressed)
{
backlight_effect_decrease();
}
return false;
break;
case ES_INC:
if (record->event.pressed)
{
backlight_effect_speed_increase();
}
return false;
break;
case ES_DEC:
if (record->event.pressed)
{
backlight_effect_speed_decrease();
}
return false;
break;
}
return true;
}
// Deals with the messy details of incrementing an integer
uint8_t increment( uint8_t value, uint8_t step, uint8_t min, uint8_t max )
{
int16_t new_value = value;
new_value += step;
return MIN( MAX( new_value, min ), max );
}
uint8_t decrement( uint8_t value, uint8_t step, uint8_t min, uint8_t max )
{
int16_t new_value = value;
new_value -= step;
return MIN( MAX( new_value, min ), max );
}
void backlight_effect_increase(void)
{
g_config.effect = increment( g_config.effect, 1, 0, BACKLIGHT_EFFECT_MAX );
backlight_config_save();
}
void backlight_effect_decrease(void)
{
g_config.effect = decrement( g_config.effect, 1, 0, BACKLIGHT_EFFECT_MAX );
backlight_config_save();
}
void backlight_effect_speed_increase(void)
{
g_config.effect_speed = increment( g_config.effect_speed, 1, 0, 3 );
backlight_config_save();
}
void backlight_effect_speed_decrease(void)
{
g_config.effect_speed = decrement( g_config.effect_speed, 1, 0, 3 );
backlight_config_save();
}
void backlight_brightness_increase(void)
{
g_config.brightness = increment( g_config.brightness, 8, 0, 255 );
backlight_config_save();
}
void backlight_brightness_decrease(void)
{
g_config.brightness = decrement( g_config.brightness, 8, 0, 255 );
backlight_config_save();
}

48
keyboards/wilba_tech/wt_mono_backlight.h
View File

@ -19,6 +19,36 @@
#include <stdint.h>
#include <stdbool.h>
#include "quantum/color.h"
typedef struct PACKED
{
uint8_t h;
uint8_t s;
} HS;
typedef struct
{
bool disable_when_usb_suspended:1; // |
bool __pad1:1; // |
bool __pad2:1; // |
bool __pad3:1; // |
bool __pad4:1; // |
bool __pad5:1; // |
bool __pad6:1; // |
bool __pad7:1; // 1 byte
uint8_t disable_after_timeout; // 1 byte
uint8_t brightness; // 1 byte
uint8_t effect; // 1 byte
uint8_t effect_speed; // 1 byte
HS color_1; // 2 bytes (Indicator Color for Xeno)
} backlight_config; // = 7 bytes
void backlight_config_load(void);
void backlight_config_save(void);
void backlight_config_set_value( uint8_t *data );
void backlight_config_get_value( uint8_t *data );
void backlight_init_drivers(void);
void backlight_timer_init(void);
@ -26,8 +56,24 @@ void backlight_timer_enable(void);
void backlight_timer_disable(void);
void backlight_set_suspend_state(bool state);
void backlight_set_indicator_state(uint8_t state);
// This should not be called from an interrupt
// (eg. from a timer interrupt).
// Call this while idle (in between matrix scans).
// If the buffer is dirty, it will update the driver with the buffer.
void backlight_update_pwm_buffers(void);
void backlight_set_brightness_all( uint8_t value );
// Handle backlight specific keycodes
bool process_record_backlight(uint16_t keycode, keyrecord_t *record);
void backlight_set_key_hit(uint8_t row, uint8_t col);
void backlight_effect_increase(void);
void backlight_effect_decrease(void);
void backlight_effect_speed_increase(void);
void backlight_effect_speed_decrease(void);
void backlight_brightness_increase(void);
void backlight_brightness_decrease(void);

46
keyboards/wilba_tech/zeal60/rules.mk
View File

@ -1,5 +1,3 @@
# project specific files
SRC = keyboards/wilba_tech/wt_main.c \
keyboards/wilba_tech/wt_rgb_backlight.c \
@ -10,42 +8,14 @@ SRC = keyboards/wilba_tech/wt_main.c \
# MCU name
MCU = atmega32u4
# Processor frequency.
# This will define a symbol, F_CPU, in all source code files equal to the
# processor frequency in Hz. You can then use this symbol in your source code to
# calculate timings. Do NOT tack on a 'UL' at the end, this will be done
# automatically to create a 32-bit value in your source code.
#
# This will be an integer division of F_USB below, as it is sourced by
# F_USB after it has run through any CPU prescalers. Note that this value
# does not *change* the processor frequency - it should merely be updated to
# reflect the processor speed set externally so that the code can use accurate
# software delays.
F_CPU = 16000000
#
# LUFA specific
#
# Target architecture (see library "Board Types" documentation).
ARCH = AVR8
# Input clock frequency.
# This will define a symbol, F_USB, in all source code files equal to the
# input clock frequency (before any prescaling is performed) in Hz. This value may
# differ from F_CPU if prescaling is used on the latter, and is required as the
# raw input clock is fed directly to the PLL sections of the AVR for high speed
# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
# at the end, this will be done automatically to create a 32-bit value in your
# source code.
#
# If no clock division is performed on the input clock inside the AVR (via the
# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
F_USB = $(F_CPU)
# Interrupt driven control endpoint task(+60)
OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
# Boot Section
# Bootloader selection
# Teensy halfkay
# Pro Micro caterina
# Atmel DFU atmel-dfu
# LUFA DFU lufa-dfu
# QMK DFU qmk-dfu
# ATmega32A bootloadHID
# ATmega328P USBasp
BOOTLOADER = atmel-dfu
# Do not put the microcontroller into power saving mode

46
keyboards/wilba_tech/zeal65/rules.mk
View File

@ -1,5 +1,3 @@
# project specific files
SRC = keyboards/wilba_tech/wt_main.c \
keyboards/wilba_tech/wt_rgb_backlight.c \
@ -10,42 +8,14 @@ SRC = keyboards/wilba_tech/wt_main.c \
# MCU name
MCU = atmega32u4
# Processor frequency.
# This will define a symbol, F_CPU, in all source code files equal to the
# processor frequency in Hz. You can then use this symbol in your source code to
# calculate timings. Do NOT tack on a 'UL' at the end, this will be done
# automatically to create a 32-bit value in your source code.
#
# This will be an integer division of F_USB below, as it is sourced by
# F_USB after it has run through any CPU prescalers. Note that this value
# does not *change* the processor frequency - it should merely be updated to
# reflect the processor speed set externally so that the code can use accurate
# software delays.
F_CPU = 16000000
#
# LUFA specific
#
# Target architecture (see library "Board Types" documentation).
ARCH = AVR8
# Input clock frequency.
# This will define a symbol, F_USB, in all source code files equal to the
# input clock frequency (before any prescaling is performed) in Hz. This value may
# differ from F_CPU if prescaling is used on the latter, and is required as the
# raw input clock is fed directly to the PLL sections of the AVR for high speed
# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
# at the end, this will be done automatically to create a 32-bit value in your
# source code.
#
# If no clock division is performed on the input clock inside the AVR (via the
# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
F_USB = $(F_CPU)
# Interrupt driven control endpoint task(+60)
OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
# Boot Section
# Bootloader selection
# Teensy halfkay
# Pro Micro caterina
# Atmel DFU atmel-dfu
# LUFA DFU lufa-dfu
# QMK DFU qmk-dfu
# ATmega32A bootloadHID
# ATmega328P USBasp
BOOTLOADER = atmel-dfu
# Do not put the microcontroller into power saving mode