Add Makefile for tmk board and tweak scan wait
This commit is contained in:
tmk
parent
681e019450
commit
e9796ff462
129
keyboard/hhkb/Makefile.tmk
Normal file
129
keyboard/hhkb/Makefile.tmk
Normal file
@ -0,0 +1,129 @@
|
||||
#----------------------------------------------------------------------------
|
||||
# On command line:
|
||||
#
|
||||
# make all = Make software.
|
||||
#
|
||||
# make clean = Clean out built project files.
|
||||
#
|
||||
# make coff = Convert ELF to AVR COFF.
|
||||
#
|
||||
# make extcoff = Convert ELF to AVR Extended COFF.
|
||||
#
|
||||
# make program = Download the hex file to the device.
|
||||
# Please customize your programmer settings(PROGRAM_CMD)
|
||||
#
|
||||
# make teensy = Download the hex file to the device, using teensy_loader_cli.
|
||||
# (must have teensy_loader_cli installed).
|
||||
#
|
||||
# make dfu = Download the hex file to the device, using dfu-programmer (must
|
||||
# have dfu-programmer installed).
|
||||
#
|
||||
# make flip = Download the hex file to the device, using Atmel FLIP (must
|
||||
# have Atmel FLIP installed).
|
||||
#
|
||||
# make dfu-ee = Download the eeprom file to the device, using dfu-programmer
|
||||
# (must have dfu-programmer installed).
|
||||
#
|
||||
# make flip-ee = Download the eeprom file to the device, using Atmel FLIP
|
||||
# (must have Atmel FLIP installed).
|
||||
#
|
||||
# make debug = Start either simulavr or avarice as specified for debugging,
|
||||
# with avr-gdb or avr-insight as the front end for debugging.
|
||||
#
|
||||
# make filename.s = Just compile filename.c into the assembler code only.
|
||||
#
|
||||
# make filename.i = Create a preprocessed source file for use in submitting
|
||||
# bug reports to the GCC project.
|
||||
#
|
||||
# To rebuild project do "make clean" then "make all".
|
||||
#----------------------------------------------------------------------------
|
||||
|
||||
# Target file name (without extension).
|
||||
TARGET = hhkb_tmk
|
||||
|
||||
# Directory common source filess exist
|
||||
TOP_DIR = ../..
|
||||
|
||||
# Directory keyboard dependent files exist
|
||||
TARGET_DIR = .
|
||||
|
||||
|
||||
# List C source files here. (C dependencies are automatically generated.)
|
||||
SRC += keymap.c \
|
||||
matrix.c \
|
||||
led.c
|
||||
|
||||
CONFIG_H = config.h
|
||||
|
||||
|
||||
# MCU name
|
||||
#MCU = at90usb1286
|
||||
MCU = atmega32u4
|
||||
|
||||
# Processor frequency.
|
||||
# This will define a symbol, F_CPU, in all source code files equal to the
|
||||
# processor frequency in Hz. You can then use this symbol in your source code to
|
||||
# calculate timings. Do NOT tack on a 'UL' at the end, this will be done
|
||||
# automatically to create a 32-bit value in your source code.
|
||||
#
|
||||
# This will be an integer division of F_USB below, as it is sourced by
|
||||
# F_USB after it has run through any CPU prescalers. Note that this value
|
||||
# does not *change* the processor frequency - it should merely be updated to
|
||||
# reflect the processor speed set externally so that the code can use accurate
|
||||
# software delays.
|
||||
F_CPU = 8000000
|
||||
|
||||
|
||||
#
|
||||
# LUFA specific
|
||||
#
|
||||
# Target architecture (see library "Board Types" documentation).
|
||||
ARCH = AVR8
|
||||
|
||||
# Input clock frequency.
|
||||
# This will define a symbol, F_USB, in all source code files equal to the
|
||||
# input clock frequency (before any prescaling is performed) in Hz. This value may
|
||||
# differ from F_CPU if prescaling is used on the latter, and is required as the
|
||||
# raw input clock is fed directly to the PLL sections of the AVR for high speed
|
||||
# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
|
||||
# at the end, this will be done automatically to create a 32-bit value in your
|
||||
# source code.
|
||||
#
|
||||
# If no clock division is performed on the input clock inside the AVR (via the
|
||||
# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
|
||||
F_USB = $(F_CPU)
|
||||
|
||||
# Interrupt driven control endpoint task
|
||||
OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
|
||||
|
||||
|
||||
# Boot Section Size in *bytes*
|
||||
# Teensy halfKay 512
|
||||
# Teensy++ halfKay 1024
|
||||
# Atmel DFU loader 4096
|
||||
# LUFA bootloader 4096
|
||||
# USBaspLoader 2048
|
||||
OPT_DEFS += -DBOOTLOADER_SIZE=4096
|
||||
|
||||
|
||||
# Build Options
|
||||
# comment out to disable the options.
|
||||
#
|
||||
BOOTMAGIC_ENABLE = yes # Virtual DIP switch configuration
|
||||
MOUSEKEY_ENABLE = yes # Mouse keys
|
||||
EXTRAKEY_ENABLE = yes # Audio control and System control
|
||||
CONSOLE_ENABLE = yes # Console for debug
|
||||
COMMAND_ENABLE = yes # Commands for debug and configuration
|
||||
#NKRO_ENABLE = yes # USB Nkey Rollover
|
||||
|
||||
|
||||
# Search Path
|
||||
VPATH += $(TARGET_DIR)
|
||||
VPATH += $(TOP_DIR)
|
||||
|
||||
include $(TOP_DIR)/protocol/lufa.mk
|
||||
include $(TOP_DIR)/common.mk
|
||||
include $(TOP_DIR)/rules.mk
|
||||
|
||||
debug-on: EXTRAFLAGS += -DDEBUG
|
||||
debug-on: all
|
||||
@ -73,6 +73,32 @@ static matrix_row_t _matrix1[MATRIX_ROWS];
|
||||
#define KEY_POWER_ON()
|
||||
#define KEY_POWER_OFF()
|
||||
|
||||
#elif defined(__AVR_ATmega32U4__)
|
||||
// Ports for my designed Alt Controller PCB
|
||||
// row: PB0-2
|
||||
// col: PB3-5,6
|
||||
// key: PD7(pull-uped)
|
||||
// prev: PB7
|
||||
#define KEY_INIT() do { \
|
||||
DDRB = 0xFF; \
|
||||
PORTB = 0x00; \
|
||||
DDRD &= ~0x80; \
|
||||
PORTD |= 0x80; \
|
||||
KEY_UNABLE(); \
|
||||
KEY_PREV_OFF(); \
|
||||
} while (0)
|
||||
#define KEY_SELECT(ROW, COL) (PORTB = (PORTB & 0xC0) | \
|
||||
(((COL) & 0x07)<<3) | \
|
||||
((ROW) & 0x07))
|
||||
#define KEY_ENABLE() (PORTB &= ~(1<<6))
|
||||
#define KEY_UNABLE() (PORTB |= (1<<6))
|
||||
#define KEY_STATE() (PIND & (1<<7))
|
||||
#define KEY_PREV_ON() (PORTB |= (1<<7))
|
||||
#define KEY_PREV_OFF() (PORTB &= ~(1<<7))
|
||||
#define KEY_POWER_ON()
|
||||
#define KEY_POWER_OFF()
|
||||
|
||||
|
||||
#elif defined(__AVR_ATmega328P__)
|
||||
// Ports for V-USB
|
||||
// key: PB0(pull-uped)
|
||||
@ -130,7 +156,6 @@ uint8_t matrix_cols(void)
|
||||
void matrix_init(void)
|
||||
{
|
||||
#ifdef DEBUG
|
||||
print_enable = true;
|
||||
debug_enable = true;
|
||||
debug_keyboard = true;
|
||||
#endif
|
||||
@ -172,7 +197,14 @@ uint8_t matrix_scan(void)
|
||||
KEY_ENABLE();
|
||||
// Wait for KEY_STATE outputs its value.
|
||||
// 1us was ok on one HHKB, but not worked on another.
|
||||
_delay_us(10);
|
||||
// no wait doesn't work on Teensy++ with pro(1us works)
|
||||
// no wait does work on tmk PCB(8MHz) with pro2
|
||||
// 1us wait does work on both of above
|
||||
// 10us wait does work on Teensy++ with pro
|
||||
// 10us wait does work on 328p+iwrap with pro
|
||||
// 10us wait doesn't work on tmk PCB(8MHz) with pro2(very lagged scan)
|
||||
_delay_us(1);
|
||||
// _delay_us(10);
|
||||
if (KEY_STATE()) {
|
||||
matrix[row] &= ~(1<<col);
|
||||
} else {
|
||||
|
||||
Loading…
Reference in New Issue
Block a user