Commit Graph

168 Commits

Author SHA1 Message Date
Ryan
3afe0ea9b9
ST7565 tidyup (#10907) 2020-11-26 23:44:17 +11:00
Ryan
5cecc1ea1e
Add brightness level API to OLED driver (#10772)
* Add brightness level API to OLED driver

* Set default brightness to 255
2020-10-29 00:12:50 -07:00
Xelus22
5e9c078c78
[Core] IS31FL3731/36/37 bug fix (#10612)
* 3731 bug fix

* bug fixes
2020-10-23 18:08:17 +11:00
Sergey Vlasov
459ccb681f
OLED driver fixes (#10377)
* Fix dirtying in oled_write_pixel()

Set the dirty bit for the block only if oled_write_pixel() actually
changed the buffer state.  Without this check oled_write_pixel() could
not be used inside the oled_task_user() code using the “redraw always”
style, because the blocks touched by oled_write_pixel() would always
appear dirty, and oled_render() would not proceed beyond the first such
dirty block.

* Fix oled_write_pixel() with 90/270 degree rotation

Use oled_rotation_width instead of OLED_DISPLAY_WIDTH, so that a rotated
display would be handled correctly.

* Fix compilation with custom OLED_BLOCK_COUNT and OLED_BLOCK_SIZE

Some OLED sizes (e.g., 64×48) may require a nonstandard value of
OLED_BLOCK_COUNT.  The documentation says that this value may be
redefined in config.h, but actually trying to redefine it caused a
compile error, because the macro was redefined in oled_driver.c.
Make the OLED_BLOCK_COUNT definition in oled_driver.c respect any
user override, and do the same for OLED_BLOCK_SIZE just in case.

* Fix handling of out-of-range bits in oled_dirty

If a custom OLED_BLOCK_COUNT value is specified, some bits in oled_dirty
may not correspond to existing blocks; however, if those bits are set
somewhere (e.g., by code with sets oled_dirty to ~0 or even -1),
oled_render() would try to handle them and could access memory beyond
oled_buffer and perform hardware operations with out of range values.
Prevent this by masking off unused bits in oled_render(), and also avoid
setting those bits in other functions.

* Fix potentially wrong dirtying in oled_write_char()

oled_write_char() tried to mark the position just beyond the written
character as dirty; use (OLED_FONT_WIDTH - 1) to dirty the last position
still belonging to the character instead.

* Fix `#define OLED_BLOCK_TYPE uint32_t` on AVR

Using uint32_t as OLED_BLOCK_TYPE did not work properly on AVR, because
some bit shifts were performed using 16-bit int.  Add explicit casts to
OLED_BLOCK_TYPE to those shifts.
2020-10-04 05:44:19 +11:00
a_p_u_r_o
1fe7743af8
IS31FL3741 driver fixup (#10519)
* Fix issue with data transfer of CS1_SW7 to CS18_SW7.

* Fix issue with handling of scaling register buffer's dirty flag.

* Remove unused extern declaration.

* Compaction of struct is31_led utilizing bit fields.
2020-10-04 05:15:44 +11:00
Fred Silberberg
c23667608c
Add OLED driver function to determine if the screen is currently on (#10382) 2020-09-21 18:39:50 -07:00
Joel Challis
e9b3a12c6e
Fix ssd1306 compilation on avr-gcc 10 (#9267) 2020-09-17 10:42:24 +10:00
QMK Bot
25e93b4b67 format code according to conventions [skip ci] 2020-09-03 11:25:14 +00:00
MelGeek
2f26e14dc6
Update ISSI3741 (#9912)
* [Driver] bugfix reset the scaling register flag to FALSE

* Update drivers/issi/is31fl3741.c

Co-authored-by: Ryan <fauxpark@gmail.com>

* Add CS & SW defines for ISSI3741

* Make IS31FL3741 control register update clearer

Co-authored-by: Ryan <fauxpark@gmail.com>
Co-authored-by: Jumail Mundekkat <mundekkat@hotmail.com>
2020-09-03 20:37:04 +10:00
QMK Bot
a3db72df72 format code according to conventions [skip ci] 2020-08-29 22:57:48 +00:00
Sergey Vlasov
15df82cdf3 Fix DMA stream ID calculation in ws2812_pwm (#10008)
Some STM32 chips have STM32_DMA1_STREAM1 as the first DMA stream, others
(F4xx, F7xx, H7xx) have STM32_DMA1_STREAM0.  Instead of those names, use
STM32_DMA_STREAM(0), which should always give the first stm32_dma_stream_t
structure in the DMA streams array, so that the stream ID would be
calculated correctly.
2020-08-29 14:30:02 -07:00
Richard
fa6cf85727 Add a method to read the OLED display buffer from user space (#8777)
* Adding extern and declaration

* Change to mediated buffer read

* Adding raw byte read

* Restore write raw... D'Oh

* Working struct return

* Pack that struct

* Remove conditional packing and add example to docs

* Cleanup tab/spaces

* Update docs/feature_oled_driver.md

Prettify formatting

* Update drivers/oled/oled_driver.h

Prettify formatting
2020-08-29 14:30:02 -07:00
a-chol
d4be07dad3 Hid joystick interface (#4226)
* add support for hid gamepad interface
add documentation for HID joystick
Add joystick_task to read analog axes values even when no key is pressed or release. update doc
Update docs/feature_joystick.md
Manage pin setup and read to maintain matrix scan after analog read

* Incorporates patches and changes to HID reporting

There are some patches provided by @a-chol incorporated on this commit,
and also some changes I made to the HID Report structure.

The most interesting is the one dealing with number of buttons: Linux
doesn't seem to care, but Windows requires the HID structure to be byte
aligned (that's in the spec). So if one declares 8/16/32... buttons they
should not have any issues, but this is what happens when you have 9
buttons:

```
 bits |0|1|2|3|4|5|6|7|
      |*|*|*|*|*|*|*|*| axis 0 (report size 8)
      |*|*|*|*|*|*|*|*| ...
      |*|*|*|*|*|*|*|*|
      |*|*|*|*|*|*|*|*|
      |*|*|*|*|*|*|*|*|
      |*|*|*|*|*|*|*|*|
      |*|*|*|*|*|*|*|*| axis 6
      |*|*|*|*|*|*|*|*| first 8 buttons (report size 1)
      |*| | | | | | | | last of 9 buttons, not aligned
```

So for that I added a conditonal that will add a number of reports with
size 1 to make sure it aligns to the next multiple of 8. Those reports
send dummy inputs that don't do anything aside from aligning the data.

Tested on Linux, Windows 10 and Street Fighter (where the joystick is
recognized as direct-input)

* Add save and restore of each pin used in reading joystick (AVR).
Allow output pin to be JS_VIRTUAL_AXIS if the axis is connected to Vcc
instead of an output pin from the MCU.

Fix joystick report id

Fix broken v-usb hid joystick interface. Make it more resilient to unusual settings (none multiple of eight button count, 0 buttons or 0 axes)

Correct adc reading for multiple axes. Piecewise range conversion for uncentered raw value range. Input, output and ground pin configuration per axis.

Documentation fixes

* Fix port addressing for joystick analog read

* The other required set of changes
As per the PR, the changes still holding it up.
Add onekey for testing.
Fix ARM builds.
Fix device descriptor when either axes or buttons is zero.
Add compile-time check for at least one axis or button.
Move definition to try to fix conflict.
PR review comments.
qmk cformat

* avoid float functions to compute range mapping for axis adc reading

* Remove V-USB support for now. Updated docs accordingly.

* Update tmk_core/protocol/lufa/lufa.c

Co-Authored-By: Ryan <fauxpark@gmail.com>

* Update tmk_core/protocol/usb_descriptor.c

Co-Authored-By: Ryan <fauxpark@gmail.com>

* Update tmk_core/protocol/usb_descriptor.c

Co-Authored-By: Ryan <fauxpark@gmail.com>

* Update tmk_core/protocol/usb_descriptor.c

Co-Authored-By: Ryan <fauxpark@gmail.com>

* Add support for joystick adc reading for stm32 MCUs. Fix joystick hid report sending for chibios

* Fix HID joystick report sending for ChibiOS.
Add one analog axis to the onekey:joystick keymap.
Fix pin state save and restore during joystick analog read for STM32
MCUs.

* Update tmk_core/protocol/chibios/usb_main.c

Co-Authored-By: Ryan <fauxpark@gmail.com>

* Update tmk_core/protocol/lufa/lufa.c

Co-Authored-By: Ryan <fauxpark@gmail.com>

* Add missing mcuconf.h and halconf.h to onekey:joystick keymap.
Add suggested fixes from PR.

* Switch saveState and restoreState signature to use pin_t type.
onekey:joystick : add a second axis, virtual and programmatically animated.

* Update docs/feature_joystick.md

Co-Authored-By: Ryan <fauxpark@gmail.com>

* Update docs/feature_joystick.md

Co-Authored-By: Ryan <fauxpark@gmail.com>

* Add PR corrections

* Remove halconf.h and mcuconf.h from onekey keymaps

* Change ADC_PIN to A0

Co-authored-by: achol <allecooll@hotmail.com>
Co-authored-by: José Júnior <jose.junior@gmail.com>
Co-authored-by: a-chol <achol@notamail.com>
Co-authored-by: Nick Brassel <nick@tzarc.org>
Co-authored-by: Ryan <fauxpark@gmail.com>
2020-08-29 14:30:02 -07:00
Nick Brassel
c6b7a0d386 Add support for DMAMUX-capable MCU configuration with WS2812 PWM driver. (#9471) 2020-08-29 14:30:02 -07:00
Ryan
e7434c874b Remove inclusion of adafruit_ble.h from ssd1306.c (#9355) 2020-08-29 14:30:02 -07:00
Nick Brassel
385d49cc39 Initial work for consolidation of ChibiOS platform files (#8327)
* Initial work for consolidation of board files and default ChibiOS configs.

* Migrate F401/F411 black pills for testing.

* Add early init bootloader jump flag.

* Add support for I2C in order to use i2c_scanner keymap.

* Add F401/F411 HSE bypass to get things booting.

* Exempt "hooked" ChibiOS conf files from updater script.

* Fix up ordering for bootloader_defs file check.

* Match previous $(KEYBOARD_PATHS) value for Proton-C, updated for all board configs.
2020-08-29 14:30:02 -07:00
Joel Challis
d91987ab9a
Enable OLED support for Teensy 3.2/LC (#7591)
* I2C_TIMEOUT is not defined on arm teensy

* Work round teensy having different ChibiOS config options

* Stash OLED conf files

* update comment

* update comment

* Remove stm32 alias to allow teensy alt mode
2020-07-26 07:50:56 +10:00
Gautham Yerroju
92d0a71af7
OLED driver function to set pixels (#9713)
* Add a function to set individual pixels

* Add documentation for oled_write_pixel

* use smaller data type for oled_write_pixel

* Fix boundary check edge case

* Update oled_write_pixel doc

Co-authored-by: Ryan <fauxpark@gmail.com>

Co-authored-by: Ryan <fauxpark@gmail.com>
2020-07-16 15:48:04 +10:00
MelGeek
fe744eb1ad
[Driver] bugfix reset the scaling register flag to FALSE (#9507)
Co-authored-by: Ryan <fauxpark@gmail.com>
2020-07-06 22:38:41 +10:00
Nick Brassel
3d6d899666
qmk cformat (#9500) 2020-06-22 11:21:48 +10:00
MelGeek
d9eae3ef03
Support IS31FL3741 and IS31FL3741A. (#9201) 2020-06-20 14:49:15 +10:00
QMK Bot
8b572de523 format code according to conventions [skip ci] 2020-06-20 03:37:04 +00:00
Joshua Diamond
18e561b82c
Fix incorrect delay when setting WS2812 (and similar) leds (#9302)
* Fix incorrect delay when setting WS2812 (and similar) leds

* Add documentation for WS2812_DELAY_MICROSECONDS

* Remove improper cast to uint8_t

Co-authored-by: Sergey Vlasov <sigprof@gmail.com>

* Remove unneeded cast to uint8_t and correct math

Co-authored-by: Sergey Vlasov <sigprof@gmail.com>

* microseconds -> µs

Co-authored-by: Ryan <fauxpark@gmail.com>

* Make documentation better match the spec sheet.

Co-authored-by: Ryan <fauxpark@gmail.com>

* Rename macro to match spec sheet

* Further correction to the delay maths for the SPI case.

Co-authored-by: Joel Challis <git@zvecr.com>

* Move ws2812_common.h to the drivers directory

* Revert "Further correction to the delay maths for the SPI case."

This reverts commit e61b56a2cfc7dfec9992a7a3af92afa50e5b8ec0.

* Remove ws2812_setleds_pin(); consolidate ws2812.h

Co-authored-by: Sergey Vlasov <sigprof@gmail.com>
Co-authored-by: Ryan <fauxpark@gmail.com>
Co-authored-by: Joel Challis <git@zvecr.com>
2020-06-20 12:59:28 +10:00
Xelus22
c785148445
STM32 WS2812 Open Drain Configuration (#9414)
* update docs stm32 only and applies  to all 3 driver
* cformat
2020-06-20 08:35:32 +10:00
itsnoteasy
7aa4cc9603
adds support for the atmega328 (#9043)
Co-authored-by: Ryan <fauxpark@gmail.com>
2020-06-10 22:23:11 +01:00
Wilba
ac447d8acb
ISSI driver compile error fix (#9169) 2020-05-27 01:18:13 +01:00
Ryan
e4823aadec
Fix capitalisation of "GitHub" (#9184) 2020-05-25 19:43:14 -07:00
Drashna Jaelre
883dd2df80
Fix i2c EEPROM compile issue when Console is enabled (#9186)
* Fix i2c EEPROM compile issue when Console is enabled

* Only use if both console and debugging is enabled
2020-05-24 23:02:13 +01:00
Drashna Jaelre
2ac3a51d71
Fix SPI EEPROM compile issue when Console is enabled (#9193) 2020-05-24 23:02:00 +01:00
zvecr
b95979560c Initial arm serial partially based on old lets split code 2020-05-21 18:04:30 +01:00
Joel Challis
65150984bd
ARM split - Add uart half duplex transport support (#7987)
* ARM split - Add uart half duplex transport support

* Fix for f103

* initial full duplex pass

* partially remove full duplex

* Correct speeds within driver docs

Co-authored-by: Nick Brassel <nick@tzarc.org>

Co-authored-by: Nick Brassel <nick@tzarc.org>
2020-05-21 18:00:21 +01:00
Nick Brassel
54b04d9665
Add SPI 25xx EEPROM support. (#8780) 2020-05-19 10:34:00 +10:00
Brian Mock
8ca4ed9a98
Fix off by one error with oled_write_raw_P (#9045) 2020-05-10 04:14:07 +01:00
Ryan
16a15c1cfc
QMK-ify some GPIO macros (#8315) 2020-04-30 16:24:47 +10:00
Nick Brassel
b17482c3fd
Add SPI master for ChibiOS/ARM. (#8779) 2020-04-29 14:01:20 +10:00
Nick Brassel
46e4493761
Fix AVR SPI parameter configuration, remove timeouts due to sync protocol. (#8775) 2020-04-13 17:09:50 +10:00
QMK Bot
974f83ec4b format code according to conventions [skip ci] 2020-04-08 01:38:16 +00:00
Ryan
400ca2d035
spi_master for AVR (#8299)
* Change _delay_ms/us() to wait_ms/us()

* Switch to platform-agnostic GPIO macros

* Add AVR spi_master and migrate Adafruit BLE code

* Set verbose back to false

* Add clock divisor, bit order and SPI mode configuration for init

* Add start and stop functions

* Move configuration of mode, endianness and speed to `spi_start()`

* Some breaks here would be good

* Default Adafruit BLE clock divisor to 4 (2MHz on the Feather 32U4)

* Remove mode and divisor enums

* Add some docs

* No hr at EOF

* Add links in sidebar
2020-04-08 11:04:31 +10:00
Joel Challis
31fd0cbc1c
Fix AVR ws2812 when ADDRESS_BASE is non zero (#8646)
* Fix AVR ws2812 when ADDRESS_BASE is non zero

* fix port

* remove unused function defs
2020-04-02 20:46:38 +01:00
Casper Weiss Bang
13fff52f6b
fixed problem with implicit declaration in quantum/rgblight.c (#8406)
* Update tmk_core/common/progmem.h

Co-Authored-By: Ryan <fauxpark@gmail.com>

* Update quantum/rgblight.c

Co-Authored-By: Ryan <fauxpark@gmail.com>

* fixed problem with implicit declaration in quantum/rgblight.c (#8381)

Co-authored-by: Ryan <fauxpark@gmail.com>
2020-03-28 23:35:11 +00:00
Joel Challis
d96380e654
Initial arm->chibios pass - simplify some platform logic (#8450) 2020-03-21 16:20:04 +11:00
QMK Bot
ece14278ef format code according to conventions [skip ci] 2020-03-17 01:02:01 +00:00
Joel Challis
567bfc97ac
ARM - ADC cleanup (#8385)
* Update switch to array to allow custom values

* Add adc keymap

* update docs to reflect alignment of default 10 bit

* start conversion to USE_ADCVn

* samplerate is hella wrong...stub out for now

* basic f1 and f4 functionality

* Tidy up current changes

* Restore old pinToMux function

* Add back sample rate for supported platforms

* F0 compile fixes

* wordsmithery

Co-Authored-By: Ryan <fauxpark@gmail.com>

* Remove reference to avr only function

Co-authored-by: Ryan <fauxpark@gmail.com>
2020-03-17 00:29:52 +00:00
QMK Bot
60b020acab format code according to conventions [skip ci] 2020-03-14 21:37:29 +00:00
brickbots
b5be96f8bb
Adding OLED scroll setup functions (#8386)
* Adding scroll setup functions:

* Clarifying values stored in oled_scroll_speed
2020-03-14 21:04:34 +00:00
Ryan
d597af9e1e
Remove pro_micro.h (#8374)
* Remove pro_micro.h

* Include quantum.h
2020-03-14 15:31:15 +00:00
Nick Brassel
f2f2afe13b
Add support for STM32L0/L1 onboard EEPROM. (#8002)
* Add support for STM32L0/L1 onboard EEPROM.

* Update docs/eeprom_driver.md

Co-Authored-By: Joel Challis <git@zvecr.com>

Co-authored-by: Joel Challis <git@zvecr.com>
2020-03-12 12:59:55 +11:00
QMK Bot
2b66acf04a format code according to conventions [skip ci] 2020-03-11 05:11:02 +00:00
Drew Mills
5ac6fe1888
Add ADC support for STM32F3 and STM32F0 devices (#7681)
* Add ADC support for STM32F3 and STM32F0 devices

* Add section about configration options available to the ARM ADC implementation

* Fix STM32 typo
2020-03-11 15:38:39 +11:00
QMK Bot
2306c974e5 format code according to conventions [skip ci] 2020-03-07 01:24:47 +00:00