Commit Graph

460 Commits

Author SHA1 Message Date
fauxpark
d16056e60a Fix TO() and DF() calling layer_state_set_[kb,user] twice (#6003) 2019-05-29 07:45:28 -07:00
Ryan Caltabiano
ba26736d7e Fix bit count calculation for iterating layers 2019-05-18 13:47:34 -07:00
Alex Ong
00d1d7828c Typedef'ed layer_state_t to uint32_t (#3637)
* Typedef'ed layer_state_t to uint32_t.

This enables future work with layer_state_t to uint8_t for optimization purposes.

* Removed accidental xeal60 commit

* Revert to egyptian brackets, added sizeof(layer_state_t) so when layer_state_t is redefined it will automagically work.

* Add additional typedefs

* Add checks for setting layer state

* Update tmk_core/common/action_layer.h

Co-Authored-By: alex-ong <the.onga@gmail.com>

* Revert commit.
2019-05-17 13:47:50 -07:00
Drashna Jaelre
48b01446ba Make delay for Capslock in Hold-Tap functions configurable (#5497)
* Increase delay for Hold-Tap register for CAPSLOCK

Because it seems that the 80ms delay wasn't too much

* Screw it, make the caps delay a define and make it configurable
2019-05-16 10:28:06 -07:00
XScorpion2
e01b2d518a [Keyboard] Sol keyboard conversion to split common (#5773)
* Split common conversion

* Updated serial and encoder pins

* Fixing default folder until r2

* Fixing oled driver on slave split common

* Fixing keymap compile errors

* Fixing oled inactivity timer on slave split common

* Hoisted oled driver task, init, & activity to keyboard.c

* Update keyboards/sol/config.h

Co-Authored-By: XScorpion2 <rcalt2vt@gmail.com>

* Remove TAPPING_FORCE_HOLD
2019-05-06 15:06:43 -07:00
Drashna Jaelre
8a9c90ad78 Re-fix Mousekey Movements (#5740)
* Re-fix Mousekey Movements

After the new movement model was instroduced, it broke diagonal momement, again.  Reapplying fix from #3147 to both old and new acceleration method.

* Make diagonal mouse report checks more readable

Co-Authored-By: drashna <drashna@live.com>
2019-05-06 08:35:01 -07:00
Drashna Jaelre
90cd383d46 Fix wakeup function on ChibiOS (#5707)
Somebody was a very, very bad boy, and did a poor job of copy-pasting
2019-04-26 11:03:51 -07:00
Drashna Jaelre
dd64a4e738 Init RGB Matrix EEPROM
I'm not sure how to check if it's the same as RGBLIGHT's EEPROM, but if you don't init it, it **will not** work properly until it is initialized.
2019-04-19 14:58:08 -07:00
Danny Nguyen
746058306b Make sure NOBITS is set on reset_key
Patch from https://github.com/qmk/qmk_firmware/issues/3657#issuecomment-415147411

Long story short, in avr-gcc pre-8.2, reset_key was assigned to a memory area that was in a normal range, but when 8.2 came out, that memory got moved to an out of range area, causing errors like 0x800293 out of range. Apparently, this was fixed up in avr-gcc, but we haven't seen a release with the fix yet (we expected it in 8.3, but that didn't happen for some reason).

What this commit does is move the reset_key back to the original memory location it was in before.
2019-04-19 14:44:16 -07:00
Markus Weimar
e3a940026e Improve mouse keys docs and constant speed mode 2019-04-18 23:31:17 -07:00
patrickmt
3542f594d9 Fix wake from suspend LED functionality
When waking from suspend, only enable the LED drivers if they were not previously set to disabled by the user. This functionality was removed by the recent updates to adapt Massdrop keyboards to QMK RGB Matrix. Affects Massdrop CTRL and ALT keyboards compiled using Massdrop Configurator mode.
2019-04-18 11:55:45 -07:00
Drashna Jaelre
5701b75e3c Custom Tapping Term per key (#5009)
* Add customizable tapping terms

* Add Documentation

* Fix function

* Fixes

* It's not a pointer

* Add debugging output

* Update documentation to be at least vaguely accurate

* Use `get_tapping_term(tapping_key.event)` instead

`e` doesn't include column and row information, properly. It registers as 255, regardless of the actual keypress.

However `tapping_key.event` actually gives the correct column and row information.  It appears be the correct structure to use. 

In fact, it looks like the issue is that `e` is actually the "TICK" structure, as defined in keyboard.h

* Use variable tapping term value rather than define

* Silly drashna - tapping_key.event, not event

* add get_event_keycode() function

* Fix typo

Co-Authored-By: drashna <drashna@live.com>

* Remove post_process_record_quantum since it's the wrong PR

* Update quantum/quantum.c

Co-Authored-By: drashna <drashna@live.com>

* Better handle ifdef statement for permissive hold

Since we can't be sure that tapping term is actually 500

* Update quantum.c comments based on feedback

* Clean up get_tapping_term function

Clean up function so that users don't need to call the event function, and instead only check the keycode

* Add ability to run functionality on and off

* Make ifdef's more compact
2019-04-05 15:47:25 -04:00
Daniel Prilik
763b26cdb9 RGB Matrix support for Massdrop CTRL/ALT (#5328)
* port Massdrop CTRL/ALT to use RGB Matrix

Co-authored-by: Matt Schneeberger <helluvamatt@gmail.com>

* Massdrop lighting support working

This commit is to get the Massdrop lighting code working again through use of the compilation define USE_MASSDROP_CONFIGURATOR added to a keymap's rules.mk.
Added keymaps for both CTRL and ALT named default_md and mac_md. These should be used if the Massdrop style lighting is desired.

* Updating config based on testing results with patrickmt & compile errors

* Updates for PR5328

For CTRL and ALT:
Moved location of new RGB Matrix macros from config_led.h to config.h.
Added RGB_MATRIX_LED_FLUSH_LIMIT (time between flushes) to config.h for correct LED driver update timing.
Re-added missing breathing code for when Massdrop configurator mode is defined.

* remove prilik keymap form PR
2019-04-03 18:30:47 -07:00
Jon Arintok
346cbd8816 Add 3 speed mousekey movement option (#2246)
This allows for constant, non-accelerated mouse movement, while retaining the original functionality. Configurable by a define.
2019-03-26 19:34:33 -07:00
James Churchill
37932c293c Next set of split_common changes (#4974)
* Update split_common to use standard i2c drivers

* Eliminate RGB_DIRTY/BACKLIT_DIRTY

* Fix avr i2c_master error handling

* Fix i2c_slave addressing

* Remove unneeded timeout on i2c_stop()

* Fix RGB I2C transfers

* Remove incorrect comment
2019-03-12 10:23:28 -07:00
Chris Lewis
c1c5922aae Velocikey: Match RGB animation speed to typing speed (#3754)
* Draft commit of typing speed RGB control

* More information in the readme

* Support all RGB animation modes (Fixes #1)

* Added support for all RGB light modes to use typing speed

Except christmas lights because that is seizure-inducing at high speeds!

* Introduced a value range specific to each RGB mode

Because some modes are a little too much when running at full speed!

* Update readme.md

* Update readme.md

* Re-arrange typing_speed definitions (Fixes #5) (#6)

* Re-arrange variable definitions to avoid including quantum.h from rgblight.c

* Fix a compilation error when trying to run make test:all

* Tweaks to the typing speed decay rate

* Renamed to momentum; moved implementation into dedicated files

* Groundwork for toggling momentum on/off (currently always on)

* Add EEPROM toggle for momentum-matching

* Moved momentum out of RGBLIGHT_ENABLE toggles so it's more generic

* Move momentum decay task out of rgblight_task()

* Fix missing momentum.h in lufa.c

* Experimental LED support (untested)

* Draft commit of typing speed RGB control

* More information in the readme

* Support all RGB animation modes (Fixes #1)

* Added support for all RGB light modes to use typing speed

Except christmas lights because that is seizure-inducing at high speeds!

* Introduced a value range specific to each RGB mode

Because some modes are a little too much when running at full speed!

* Update readme.md

* Update readme.md

* Re-arrange typing_speed definitions (Fixes #5) (#6)

* Re-arrange variable definitions to avoid including quantum.h from rgblight.c

* Fix a compilation error when trying to run make test:all

* Tweaks to the typing speed decay rate

* Renamed to momentum; moved implementation into dedicated files

* Groundwork for toggling momentum on/off (currently always on)

* Add EEPROM toggle for momentum-matching

* Moved momentum out of RGBLIGHT_ENABLE toggles so it's more generic

* Move momentum decay task out of rgblight_task()

* Fix missing momentum.h in lufa.c

* Added documentation

* Renamed feature to velocikey

* Reverted readme to original state

* Correct the readme title

* Updated feature name in the docs

* Update EECONFIG name

* Add compile-time toggles for velocikey

* Update feature documentation

* Revert "Merge branch 'led-support' into master"

This reverts commit e123ff5febf61639b9a9020748e1c2e2313460ff, reversing
changes made to df111a55b9d4929182e16108b1c0ead15b16df97.

* Move velocikey EECONFIG definition to depend on VELOCIKEY_ENABLE

* Rename decay_task function to decelerate

* Apply suggestions from code review

Co-Authored-By: chrislewisdev <chris@chrislewisdev.com>

* Re-order eeconfig definitions

* Apply coding conventions

* Apply #ifdef check in lufa.c

* Refactored interval time checks into one functionc

* Small rename

* Fix unused function error for layouts not using all rgb effects

* Only update EEPROM if Velocikey is enabled

* Incorporate code review feedback

* Small adjustment to top-end decay rate

* Add Velocikey documentation to table of contents

* Bring tetris:default keymap size down by disabling audio
2019-02-21 07:22:46 -08:00
Konstantin Đorđević
5cb713148d Change Command keycode defaults to match corresponding Bootmagic codes (#5078)
* Change Command keycode defaults to match corresponding Bootmagic codes

* Make alternate magic key keycodes consistent

* Reflect changes from previous commit in tmk_core/common/command.c

* Remove unnecessary MAGIC_KEY_* definitions from keymaps compatible with these changes

* Swap E and BSPACE for MAGIC_KEY_EEPROM

* Add MAGIC_KEY_EEPROM_CLEAR instead of MAGIC_KEY_EEPROM_ALT

* Remove BOOTMAGIC_ENABLE checks around EECONFIG stuff

* Update Command descriptions
2019-02-17 22:23:32 -08:00
ishtob
2cee371bf1 Haptic feedback generalized - DRV2605 and solenoids (#4939)
* initial work to add eeprom to haptic feedback and decouple the feedback process from keyboards

* Haptic feedback enhancements: on/off toggle working, feedback order working
todo:
-work on modes switching
-get modes switching to save to eeprom

* haptic enhancement - eeprom and modes added

* Added set and get functions for haptic feedback

* initial implementation of solenoids under haptic feedback

* changed eeprom to 32 bits to reserve blocks for future features

* start documentation of haptic feedback

* change keycode per comment from reviewers

* typo fixes

* added eeprom for solenoid configs

* added solenoid and docs

* Add/fix default parameters configs, improve docs

* more doc cleanup

* add in solenoid buzz toggle, clean up doc

* some fixes for error in compiling solenoid

* fix a chibios specific i2c read function and added one for AVR controllers in DRV2605L.c

* fixes for avr side issues

* update keymap

* fix keymap compile error

* fix bugs found during solenoid testing

* set pin that is not powered during bootloader

* added warning about certain pins on the MCU may trip solenoid during DFU/bootloader
2019-02-16 18:39:30 -08:00
Drashna Jaelre
c22f3ba3a2
Debounce refactor / API (#3720)
* Added xeal60 via clone of lets split

* Delete removed other keymaps

* Basic keymap (no FN). Compiles.

* Removed NP_STAR and NP_SLSH.

* Removed "debounce_algo = manual" in all keyboards with CUSTOM_MATRIX = yes.

* Changed order of rules in TMK. Documented feature.

* Fixed missing whitespace in debounce documentation

Table wasn't working due to missing newline.

* Added bold in a few areas.

* DO NOT USE - Removed debounce from TMK.

* Remove accidental xeal60 commit

* DO NOT USE - debounce successfully compiled.

* DO NOT USE Revert back to original API to support split_keyboards.

* Working eager_pk

* Whitespace cleanup.

* Restored debounce.h since there wasnt any real change.

* Moved debouncing_time variable  to inside #if debounce

* Removed check for custom_matrix. We can safely include the debounce file for compilation when custom_matrix is used.

* Removed #include "matrix.h" from debounce.h

* Bug fix - was using MATRIX_ROWS instead of num_rows

* Fixed compilation error with debounce_sym_g

* Renamed DEBOUNCE_ALGO to DEBOUNCE_TYPE

* Malloc array in debounce_eager_pk, since split keyboards only use MATRIX_ROWS/2.

* Fix compile error in debounce_eager_pk

* Stricter, leaner DEBOUNCE_TYPE section in common_features.mk. Cleanup debounce_type.mk
2019-02-14 20:36:20 -08:00
Drashna Jaelre
cc5c6b449a Add kb and user level keyboard initialization functions (#3113)
* Add suspend functions

* Disable RGB code if it's disabled

* Add keyboard_init functions

* Change where references so it will compile

* Wrong command chained in wake up kb function

* Fix non-feature file changes

* Add documentation

* Re-add matrix init docs

* add rgblight code to example

* Remove suspend code

* Clean up docs

* Fix docs

* Fix suspend code

* more doc fixes

* change function to startup_* rather than keyboard_init_

* fix spelling error

* fix up docs to finish removing keyboard_init

* Use Pre and Post init functions

* Update Documenation

* Remove changes to my keymap and userspace code

* Cleanup

* Revert changes to extra files

* Forgot a semicolon

* Make sure all protocols call keyboard_setup

* Cleanup functions

* Unset startup_user

* Remove changes from division keyboard

* Readd startup_user function

* Remove all to startup_user

* Update docs/custom_quantum_functions.md

Co-Authored-By: drashna <drashna@live.com>

* Update docs/custom_quantum_functions.md

Co-Authored-By: drashna <drashna@live.com>

* Add suggestion line

* Rebase fixes

* Update documentation to be more useful/accurate

* Cleanup of documentation

* Fix spacing inconsistency

* Revert unexpected change to keymap
2019-02-14 20:18:54 -08:00
Andrew Kannan
6b4549da8c Add Satisfaction75 to QMK, Enable EEPROM on stm32f072 (#5094)
* Add stm32f072 base ck4x4 to handwired

* add prints

* Save these tries

* Save changes again

* Working hadron oled

* OLEd working but ws2812b still iffy:

* save another try

* Encoder feature + OLED

* RTC code

* Implement clock setting mode

* Whitespace

* Encoder hooked up to working LED PWM code

* Add missing files

* eeprom changes

* Save changes

* Move i2c master

* Move satisfaction75 under cannonkeys

* Set proper default folder

* Revert some core changes

* Undo paved iris changes

* Reorganize code for maintainability and prep for new features

* Add starting code for clock OLED mode

* Clock set mode finished

* Add custom encoder modes

* Actually add VIA keymap

* Gate to only 072

* fix gate for only 072

* Update header guards and includes

* Update i2c selection strategy

* Update board.c to handle software reset to DFU
2019-02-13 08:03:26 -08:00
skullY
bf2670601d compiles, but long delay on startup and problems 2019-02-10 15:37:12 -08:00
Thomas Baart
47051f506f Add One Shot Key callbacks (#4697)
* Added callbacks to one shot modifier changes

* Altered signature of callback functions

* Reordered the callback methods, shortened brief documentation

* Added One Shot Modifier callback documentation

* First attempt at unit tests

* Revert "First attempt at unit tests"

This reverts commit 5ec21a782202c0d74cf21cb852bd319f0c8b4842.

* Simplified oneshot function implementations

* Made clear_oneshot_locked_mods to be conform action_util.h, adhering to the (void) signature

* Made used datatypes for oneshot mods consistently unsigned integers

* Corrected callback to call clear callback when clear_oneshot_locked_mods is invoked

* Simplified oneshot equals statements

* Corrected return type and signature of get and set oneshot locked mods

* Consolidated one shot callbacks, added initial layer callback version

* Fixed non-updating one shot layer variable after timeout or other clear, added code comments

* Added better one shot key docs
2019-02-05 10:19:56 -08:00
fauxpark
d8e9a0f7a3 Change return type of layer_switch_get_layer() to uint8_t (#5011)
* Change return type of layer_switch_get_layer() to uint8_t

* Keep loop index signed so we don't wrap around
2019-01-31 16:40:12 -08:00
Andrew Kannan
7186d1581a Moving cannonkeys boards to one place, eeprom fix (#4999)
* Move boards to cannonkeys and share resources

* Share common files between cannonkey boards

* Fix ortho60 keymap

* update LED numbers

* Add RGB keys to Ortho60 and Ortho48

* Add Backlight control to default layout Ortho60 and 48

* Remove unnecessary ws2812.c SRC from rules.mk
2019-01-29 20:04:20 -08:00
Rockman18
df251d7a13 Backlight - New option : BACKLIGHT_CAPS_LOCK (#4769)
* [BACKLIGHT_CAPS_LOCK_INDICATOR] Use backlight toggling as Caps Lock LED

I've implemented this feature because S65-X doesn't have LED indicators
and the existing led_set_kb(usb_led) function try to use backlight as
indicator but that creates an inconsistency with backlight_config state.

- define `BACKLIGHT_CAPS_LOCK_INDICATOR` to enable Caps Lock indicator
  using backlight (for keyboards without dedicated LED)

- Don't turn off LED indicators when suspend because backlight is
  already turned off. Else led_set(0) will turn back on backlight.

- Documentation has been updated

* [BACKLIGHT_CAPS_LOCK_INDICATOR] Turn off all LED indicators except Caps Lock if BACKLIGHT_CAPS_LOCK_INDICATOR

* [BACKLIGHT_CAPS_LOCK] Rename BACKLIGHT_CAPS_LOCK_INDICATOR

* [BACKLIGHT_CAPS_LOCK] Use new IS_LED_ON method
2019-01-28 16:57:56 -08:00
Andrew Kannan
0f507f0169 Practice60 RGB and PWM Backlight (#4929)
* Update Practice60 to enable RGB via SPI DMA and use PWM backlight breathing

* Correct stm32f103c8t6 flash size in eeprom definition

* Remove unused files and improve ifdef checks

* Update quantum/rgblight.c

Co-Authored-By: awkannan <andrew.kannan@klaviyo.com>

* Update quantum/rgblight.c

Co-Authored-By: awkannan <andrew.kannan@klaviyo.com>

* EEPROM implementation fix and updated p60 code

* Update define

* Remove dead code

* Update keymap to remove test key

* Update keymap again
2019-01-28 16:40:02 -08:00
Konstantin Đorđević
4d9b11af14 Fix Command feature: use get_mods() instead of keyboard_report->mods (#4955)
* Remove unnecessary IS_COMMAND definition in clueboard/66/rev4

* Replace keyboard_report->mods with get_mods() in IS_COMMAND definitions

* Update docs to use get_mods() instead of keyboard_report->mods

* Replace keyboard_report->mods with get_mods() in tmk_core/protocol/usb_hid/test

For some reason, this occurrence used KB_LSHIFT and KB_RSHIFT, which don't exist

* Replace keyboard_report->mods with get_mods() in Massdrop keyboards (as per @patrickmt)
2019-01-27 00:28:40 -08:00
Drashna Jaelre
b05c0e46c6 Adds a default value for IS_COMMAND for COMMAND feature (#4301)
* Add default value for IS_COMMAND for COMMAND feature

* Cleanup and consistency

* Update Templates to reflect change

* Fix IS_COMMAND in template

* Fix IS_COMMAND define

* Use consistent IS_COMMAND block in templates

* Remove unnecessary `#undef IS_COMMAND` directives

* Fix compile issue on orthodox

* Reomve IS_COMMAND option for newer boards

* Remove all existing definitions of IS_COMMAND if they use default LSHIFT and RSHIFT setting

* Remove a couple of additional IS_COMMAND defines

* Remove remaining redundant IS_COMMAND definitions

* Remove #undef IS_COMMAND from orthodox:drashna and whitefox:konstantin

* Remove multiple empty lines in modified config.h files

* Update additional boards

* Reomve IS_COMMAND from newer boards

* Update Alice keyboard

* Remove IS_COMMAND from additional boards

Jan 24th edition
2019-01-26 15:49:45 -08:00
alex-ong
574fc6444b Whitespace cleanup. 2019-01-26 17:38:52 +11:00
alex-ong
39ca330f10 DO NOT USE - Removed debounce from TMK. 2019-01-26 16:56:01 +11:00
Alex Ong
c9ba618654 DO NOT USE Merge branch 'master' into debounce_refactor
Merged, however now there are two debounce.h and debounce.c to mess around with and coalesce.
# Conflicts:
#	quantum/matrix.c
2019-01-26 12:13:19 +11:00
Drashna Jaelre
7aba1fd176 Fix RGBLIGHT_SLEEP function (#4865)
* Only re-enable RGBLIGHT if it was on when going to sleep

* Reformat file to follow QMK Standards

* Fix check, since this is a loop, whoops

Much thanks to @Rockman18 for catching this and posting the additional code!
2019-01-25 17:11:49 -08:00
Konstantin Đorđević
2f009d7461 Add MOD_MASK_* macros to core code (#4337)
* Add MOD_MASK_* macros to core code

* MOD_MASK_ALL → MOD_MASK_CSAG
2019-01-25 13:02:38 -08:00
Shihpin Tseng
b416113616 Fix oneshot_time wrong type (#3696)
* Fix oneshot_time wrong type

* Fix oneshot_time_layer wrong type
2019-01-25 12:09:53 -08:00
lambda_sakura
8e47f64888 Add support for RETRO_TAPPING to LT(layer, kc) 2019-01-25 11:27:14 -08:00
Konstantin Đorđević
0f8431a57f Tidy up IS_{,HOST_}LED_{ON,OFF} macros (#4894)
* Tidy up IS_{,HOST_}LED_{ON,OFF} macros

* Tweak LED control docs
2019-01-20 20:16:36 -08:00
Junya Ogura
1d0bc5b7ba Flip definitions of macOS brightness alias
Before:
KC_BRMU - Brightness Down
KC_BRMD - Brightness Up

After:
KC_BRMU - Brightness Up
KC_BRMD - Brightness Down
2019-01-17 22:24:20 -08:00
DidierLoiseau
94ba2e5a9f Defined IS_(HOST_)LED_ON/OFF() and improved LED documentation (#4853)
* Defined IS_(HOST_)LED_ON/OFF() and improved LED documentation

* Update docs/custom_quantum_functions.md

Co-Authored-By: DidierLoiseau <didierloiseau+github@gmail.com>

* Update docs/custom_quantum_functions.md

Co-Authored-By: DidierLoiseau <didierloiseau+github@gmail.com>

* Integrated @drashna and @fauxpark's PR comments

- changed all plurals of "LED" to "LEDs" in the file
- rewording of the note about host_keyboard_leds() vs. led_set_user()

* Update docs/custom_quantum_functions.md

Co-Authored-By: DidierLoiseau <didierloiseau+github@gmail.com>
2019-01-17 17:28:33 -08:00
Jeremy Bernhardt
77399bfe51 MacOS Brightness Alias (#4836)
* Added aliases for OSX brightness

* Updated docs for alises

* Moved aliases, added docs to Brightness section

* Update docs/keycodes.md

Co-Authored-By: germ <jeremythegeek@gmail.com>

* Update docs/keycodes.md

Co-Authored-By: germ <jeremythegeek@gmail.com>

* Update keycode.h

* Update keycode.h

* Update keycodes.md

* Update docs/keycodes.md

Co-Authored-By: germ <jeremythegeek@gmail.com>
2019-01-17 17:23:01 -08:00
James Churchill
28929ad017 Simplify split_common Code significantly (#4772)
* Eliminate separate slave loop

Both master and slave run the standard keyboard_task main loop now.

* Refactor i2c/serial specific code

Simplify some of the preprocessor mess by using common function names.

* Fix missing #endif

* Move direct pin mapping support from miniaxe to split_common

For boards with more pins than sense--sorry, switches.

* Reordering and reformatting only

* Don't run matrix_scan_quantum on slave side

* Clean up the offset/slaveOffset calculations

* Cut undebounced matrix size in half

* Refactor debouncing

* Minor fixups

* Split split_common transport and debounce code into their own files

Can now be replaced with custom versions per keyboard using
CUSTOM_TRANSPORT = yes and CUSTOM_DEBOUNCE = yes

* Refactor debounce for non-split keyboards too

* Update handwired/xealous to build using new split_common

* Fix debounce breaking basic test

* Dodgy method to allow a split kb to only include one of i2c/serial

SPLIT_TRANSPORT = serial or SPLIT_TRANSPORT = i2c will include only
that driver code in the binary.

SPLIT_TRANSPORT = custom (or anything else) will include neither, the
keyboard must supply it's own code

if SPLIT_TRANSPORT is not defined then the original behaviour (include
both avr i2c and serial code) is maintained.

This could be better but it would require explicitly updating all the
existing split keyboards.

* Enable LTO to get lets_split/sockets under the line

* Add docs for SPLIT_TRANSPORT, CUSTOM_MATRIX, CUSTOM_DEBOUNCE

* Remove avr-specific sei() from split matrix_setup

Not needed now that slave doesn't have a separate main loop.
Both sides (on avr) call sei() in lufa's main() after exiting
keyboard_setup().

* Fix QUANTUM_LIB_SRC references and simplify SPLIT_TRANSPORT.

* Add comments and fix formatting.
2019-01-17 10:08:14 -08:00
Drashna Jaelre
5fcca9a226 Add documentation and fix formating (#4860) 2019-01-17 09:04:35 -08:00
Nikolaus Wittenstein
2fd86f4252 Add some function comments in action_layer.c (#4858) 2019-01-16 10:57:48 -08:00
Konstantin Đorđević
64c957d907 Add missing parentheses to some important macros (#4775)
* Add missing parentheses to quantum_keycodes macros

* Add missing parentheses to progmem macros
2019-01-08 15:08:17 -08:00
patrickmt
6e984a8b5e Update to arm_atsam wait and timer routines
Microsecond (us) delays are now handled by a busy wait loop according to MCU frequency. This replaces the system counter method which had an overhead of around 12us.
TC5 device and supporting routines removed as it was the old us delay counter.
wait_ms is now properly a macro to CLK_delay_ms.
wait_us is now properly a macro to CLK_delay_us.
Removed CLK_get_us as it has no use.
All calls to CLK_get_ms() have been replaced by timer_read64() with corrected typing.
All calls to CLK_delay_ms() have been replaced by wait_ms().
All calls to CLK_delay_us() have been replaced by wait_us() and timings verified or updated as needed after review on scope.
Corrected typing of variables using 64bit ms timer readings if needed.
2019-01-07 12:44:55 -08:00
yiancar
2bfac351ed Final HS60v2 changes. (#4790)
* initial commit, this now mostly works

- RGB controls work
- Dynamic keymap still broken due to eeprom
- Via works

* STM32 eeprom update

- Update EEPROM emulation library to handle 8bit data like AVR.
- This library also allows for multiple page pairs resulting in greater EEPROM size flexibility

* hs60 changes

* HS60 hhkb added

* Update keyboards/hs60/v2/config.h

Co-Authored-By: yiancar <yiangosyiangou@cytanet.com.cy>
2019-01-06 17:22:19 -08:00
Konstantin Đorđević
be666b2d8a Add underscores to names of brightness control constants in report.h (#4764) 2019-01-05 08:31:24 -08:00
Alex Ong
2bb2977c13 Merge branch 'master' into debounce_refactor
# Conflicts:
#	tmk_core/common/keyboard.c
2019-01-04 19:43:45 +11:00
Konstantin Đorđević
93b004c943 Keep pressed keys on layer state change (fixes #2053, #2279) (#3905)
* Keep pressed keys on layer state change

* Add doc comment for clear_keyboard_but_mods_and_keys

* Keep pressed keys only if PREVENT_STUCK_MODIFIERS is on

* Check STRICT_LAYER_RELEASE instead of PREVENT_STUCK_MODIFIERS
2018-12-28 11:07:56 -08:00
Takeshi ISHII
8f790948e5 Refactor quantum/split_common/i2c.c, quantum/split_common/serial.c (#4522)
* add temporary compile test shell script

* Extended support of SKIP_VERSION to make invariant compile results during testing.

* build_keyboard.mk, tmk_core/rules.mk: add LIB_SRC, QUANTUM_LIB_SRC support

Support compiled object enclosed in library.

e.g.
```
LIB_SRC += xxxx.c
xxxx.c --> xxxx.o ---> xxxx.a
```

* remove 'ifdef/ifndef USE_I2C' from quantum/split_common/{i2c|serial}.c

* add SKIP_DEBUG_INFO into tmk_core/rules.mk

When SKIP_DEBUG_INFO=yes is specified, do not use the -g option at compile time.

* tmk_core/rules.mk: Library object need -fno-lto

* add SKIP_DEBUG_INFO=yes

* remove temporary compile test shell script

* add '#define SOFT_SERIAL_PIN D0' to keyboards/lets_split/rev?/config.h

* quantum/split_common/serial.c: Changed not to use USE_I2C.
2018-12-14 21:31:56 -08:00
Drashna Jaelre
02d44beb44 Fix up tap_code functionality (#4609)
* Add delay in Tap Code to avoid issues

I think a few people have reporting issues with it working properly, and it may be a timing issue.  The 'register_code' uses this sort of delay in some of the functions, and
this is probably why.

Adding the 100ms delay should hopefully fix any issues with it.

* Make tap_code delay configurable

* Update documentation

* Bring tap_code16 inline with changes

* Fix type for tap_code16

Bad copy-paste job

* Just use the value check for the define

* Clarify timing in docs

Co-Authored-By: drashna <drashna@live.com>

* Wordsmithing

Co-Authored-By: drashna <drashna@live.com>
2018-12-14 09:01:58 -08:00
Konstantin Đorđević
28fbf84cc5 Add standard definitions for ALGR and KC_ALGR (#4389)
* Add standard ALGR defition, remove (re)definitions from language files

* Use ALGR(kc) consistently in ALTGR(kc) aliases

* Non-Nordic keymaps should not use NO_ALGR

* Add standard KC_ALGR definition

* Update docs with ALGR and KC_ALGR

* Update SS_ALGR and ALGR_T aliases
2018-12-12 10:17:19 -08:00
ishtob
4099536c0e adding Hadron v3 keyboard, QWIIC devices support, haptic feedback support (#4462)
* add initial support for hadron ver3

* add initial support for hadron ver3

* pull qwiic support for micro_led to be modified for use in hadron's 64x24 ssd1306 oled display

* initial work on OLED using qwiic driver

* early work to get 128x32 oled working by redefining qwiic micro oled parameters. Currently working, but would affect qwiic's micro oled functionality

* moved oled defines to config.h and added ifndef to micro_oled driver

* WORKING :D - note, still work in progress to get the start location correct on the 128x32 display.

* added equation to automatically calculate display offset based on screen width

* adding time-out timer to oled display

* changed read lock staus via read_led_state

* lock indications fixes

* Added scroll lock indication to oled

* add support for DRV2605 haptic driver

* Improve readabiity of DRV2605 driver.
-added typedef for waveform library
-added unions for registers

* Update keyboards/hadron/ver2/keymaps/default/config.h

Co-Authored-By: ishtob <ishtob@gmail.com>

* Update keyboards/hadron/ver2/keymaps/default/config.h

Co-Authored-By: ishtob <ishtob@gmail.com>

* Update keyboards/hadron/ver2/keymaps/default/config.h

Co-Authored-By: ishtob <ishtob@gmail.com>

* Update keyboards/hadron/ver2/keymaps/default/config.h

Co-Authored-By: ishtob <ishtob@gmail.com>

* Fixes for PR

* PR fixes

* fix old persistent layer function to use new set_single_persistent_default_layer

* fix issues with changing makefile defines that broken per-key haptic pulse

* Comment fixes

* Add definable parameter and auto-calibration based on motor choice
2018-12-04 08:04:57 -08:00
Giuseppe Rota
8b85ec2a98 Add Extrakey support for Brightness up/down (#4477) 2018-11-28 08:19:07 -08:00
mtei
90f9fb4eee Fixed docs/newbs_testing_debugging.md and tmk_core/common/print.h 2018-11-27 14:40:19 -05:00
James Laird-Wah
39bd760faf Use a single endpoint for HID reports (#3951)
* Unify multiple HID interfaces into one

This reduces the number of USB endpoints required, which frees them up
for other things.

NKRO and EXTRAKEY always use the shared endpoint.

By default, MOUSEKEY also uses it. This means it won't work as a Boot
Procotol mouse in some BIOSes, etc. If you really think your
keyboard needs to work as a mouse in your BIOS, set
MOUSE_SHARED_EP = no in your rules.mk.

By default, the core keyboard does not use the shared endpoint, as not
all BIOSes are standards compliant and that's one place you don't want
to find out your keyboard doesn't work.. If you are really confident,
you can set KEYBOARD_SHARED_EP = yes to use the shared endpoint here
too.

* unify endpoints: ChibiOS protocol implementation

* fixup: missing #ifdef EXTRAKEY_ENABLEs

broke build on AVR with EXTRAKEY disabled

* endpoints: restore error when too many endpoints required

* lufa: wait up to 10ms to send keyboard input

This avoids packets being dropped when two reports are sent in quick
succession (eg. releasing a dual role key).

* endpoints: fix compile on ARM_ATSAM

* endpoint: ARM_ATSAM fixes

No longer use wrong or unexpected endpoint IDs

* endpoints: accommodate VUSB protocol

V-USB has its own, understandably simple ideas about the report formats.
It already blasts the mouse and extrakeys through one endpoint with
report IDs. We just stay out of its way.

* endpoints: document new endpoint configuration options

* endpoints: respect keyboard_report->mods in NKRO

The caller(s) of host_keyboard_send expect to be able to just drop
modifiers in the mods field and not worry about whether NKRO is in use.
This is a good thing. So we just shift it over if needs be.

* endpoints: report.c: update for new keyboard_report format
2018-11-15 22:22:05 -08:00
Phillip Tennen
0cda2f43e2 Backlight status functions (#4259)
* add functions to set specific backlight state

* add function to query backlight state

* update documentation with new backlight functions

* Update tmk_core/common/backlight.c

Co-Authored-By: codyd51 <phillip.ennen@gmail.com>

* Update tmk_core/common/backlight.h

Co-Authored-By: codyd51 <phillip.ennen@gmail.com>

* update docs for is_backlight_enabled() name change
2018-11-14 07:45:46 -08:00
Drashna Jaelre
73e634482e command.h include was not set correctly 2018-11-06 00:40:30 -05:00
Drashna Jaelre
40313cfa3b Fix Terminal feature on ChibiOS 2018-11-06 00:40:02 -05:00
patrickmt
cec203ea80 USB Suspend for arm_atsam protocol
Rewrote USB state tracking for implementation of suspend state.
Updated suspend.c in entirety.
Main subtasks (generally hardware related) are now run prior to keyboard task.
2018-11-02 14:33:07 -07:00
Danny Nguyen
a5fa75fcb3 Move disable JTAG code from keyboard_init to keyboard_setup
This way all split keyboards are using that code instead of just those using split_common with the fix
2018-11-02 14:31:29 -07:00
patrickmt
cd23984afc Fix undefined reference to console_printf for CTRL and ALT keyboards
Fix undefined reference to `console_printf` for CTRL and ALT keyboards when enabling CONSOLE_ENABLE
2018-10-29 10:26:30 -07:00
a-chol
8e3330bbf6 Keyboard: bminiex : Working backlight (#4171)
* bminiex : Working backlight

* bminiex keyboard with fixes

* bminiex keyboard more fixes
2018-10-21 09:20:24 -07:00
Takuya Urakawa
f4094930a3 stm32f1xx EEPROM emulation (#3914)
* * Add stm32f1xx EEPROM emulation
* Fix eeprom update compare bug

Squashed commit of the following:

commit b8f248ae08cec0cd81ecbb8854d9b39221d4d573
Author: hsgw <urkwtky@gmail.com>
Date:   Sat Sep 15 19:13:48 2018 +0900

    fix EEPROM_update wrong compare

commit d4ed4e6ea864e967a3e17f7edee4b0c3b4a25541
Author: hsgw <urkwtky@gmail.com>
Date:   Sat Sep 15 17:43:47 2018 +0900

    eeprom fix initialization define

commit b61aa7c04d70c64df3416d63e5da08b73b6053af
Author: hsgw <urkwtky@gmail.com>
Date:   Sat Sep 15 16:33:40 2018 +0900

    maybe working

* Fix FLASH_KEY defines
2018-10-19 00:33:23 -04:00
patrickmt
ab91e07753 Massdrop keyboards console device support for hid_listen
Added hid_listen USB device for arm_atsam USB protocol.
Debug printing is now done through the console device (CONSOLE_ENABLE = yes) rather than the virtser device, for viewing in hid_listen.
Function dpf(...) renamed to CDC_printf(...) and should now be called directly if intending to print to the virtual serial device.
2018-10-10 13:49:01 -04:00
Drashna Jaelre
dad579c8f8 Add mousekey_send to (un)register_code 2018-10-04 10:44:28 -04:00
Drashna Jaelre
26f4e7031a Add tap_code function (#3784)
* Add tap_code

* formatting

* Doc clarification

* Rename variable to make more consistent
2018-10-01 20:53:47 -04:00
Drashna Jaelre
e885c793bc Add Function level EECONFIG code for EEPROM (#3084)
* Add Function level EEPROM configuration

Add kb and user functions for EEPROM, and example of how to use it.

* Bug fixes and demo

* Additional cleanup

* Add EEPROM reset macro to example

* Forgot init function in list

* Move eeconfig_init_quantum function to quantum.c and actually set default layer

* See if removing weak quantum function fixes issue

* Fix travis compile error

* Remove ifdef blocks from EECONFIG so settings are always set

* Fix for ARM EEPROM updates

* Fix merge issues

* Fix potential STM32 EEPROM issues
2018-10-01 20:53:14 -04:00
Drashna Jaelre
4318797d19 Add user level to default_layer_state_set 2018-10-01 12:58:46 -04:00
patrickmt
daf0cc60bf CTRL keyboard bootloader_jump support
Adds support for CTRL keyboards to enter bootloader via bootloader_jump()
2018-09-28 23:09:53 -04:00
patrickmt
239f02408e Massdrop keyboard updates for SEND_STRING, syscalls, stdio, debug prints, Auto Shift (#3973)
* Update for SEND_STRING usage

Update for SEND_STRING usage.
Sending keyboard reports (kbd, nkro) now obey the minimum polling time.
While attempting to send a keyboard report and waiting for a USB poll, other functions of the keyboard, including LED effects and power management, will continue to operate at their intended intervals.

* Updates for send string, syscalls, stdio, debug prints, auto shift

Now properly waiting for previous keys sent over USB to complete before sending new.
Added heap to linker and now compiling with syscalls support.
Removed custom string functions and now using stdio.
dprintf now works as intended through virtser device.

* CTRL and ALT keymap updates

CTRL mac keymap updated
ALT default and mac keymap updated
ALT rules.mk added Auto Shift with default no

* Code cleanup as per discussion with vomindoraan

Code cleanup as per discussion with vomindoraan
2018-09-28 21:32:15 -04:00
Joe Wasson
743449472e Make PREVENT_STUCK_MODIFIERS the default (#3107)
* Remove chording as it is not documented, not used, and needs work.

* Make Leader Key an optional feature.

* Switch from `PREVENT_STUCK_MODIFIERS` to `STRICT_LAYER_RELEASE`

* Remove `#define PREVENT_STUCK_MODIFIERS` from keymaps.
2018-09-17 13:48:02 -04:00
Wilba6582
48a992f1c0 Zeal60/Zeal65/M60-A implementation (#3879)
* Initial version of zeal60

* WIP

* Fixes issue #900

* Adding RGB underglow functionality.
Fixed a compile-time conflict caused by enabling RGB underglow functionality.

* Refactor RPC protocol

* Fix last merge

* README for RGB underglow updated.

* Additional README changes.

* Adding RGBW strip software-based current-limiting functionality.

* RGBW current-limiting functionality should be handled by RGBSTRIP_MAX_CURRENT_PER_LIGHT instead.

* Updated README to reflect implementation of built-in current limiting.

* Keymap readability improvements.

* Minor keymap improvements.

* Fixed LED driver init sequence, formatting

* Dimming implementation tested, working.

* Stab LEDs synced with spacebar hits in effects.

* RGB underglow tested and functional. Simplified README for RGB underglow.

* Undid accidental file deletion from previous merge conflict. Safer values for RGB underglow.

* Improved arrow key positions in keymap.

* Added functionality to correct uneven RGB underglow. Refactored related code.

* Reverted to safer values for underglow.

* Changes for v0.3

* Custom LED brightness scaling will take place after current adjustment in order to avoid being overridden.

* Create keymap.c

Added split backspace and split shift to ISO layout

* Create config.h

Turned on LEDs for new layout

* Fixed bug where left spacebar stabilizer LED (LC06) would adopt color of row above.

* Added hhkb_wilba keymap

* Update keymap.c

* Update keymap.c

* Update keymap.c

* Added indicators, full param setting via host

* Added "mousekey" layout

* Added Zeal65 support, factory test mode

* Keycode safe range changed, caused bugs

* Bumped EEPROM version due to change in QMK keycodes

* Disable HHKB "blocked" LEDs if KC_NO in keymap

* Added "disable_hhkb_blocker_leds"

* Required overridden function for keymaps in EEPROM

* Added polar coordinate mapping, effect speed

* Force Raw HID interface number to 1 always

* Fixed last merge from master

* Added effect speed to default keymaps

* add BACKLIGHT_ prefix to vars

* add BACKLIGHT_ prefix to vars

* Keymap speed effect; keymap improvements/fixes
Readme updated to match changes

* Refactored to use common IS31FL3731/I2C drivers

* Fixed make rules, backlight disabled feature

* Make split rightshift default for Zeal65

* Added M60-A as a "version" of Zeal60.

* Renamed IS31FL3731 driver functions

* Fix suspend_wakeup_init_kb() being defined twice

* First pass refactor dynamic keymaps

* Updated to changed I2C and ISSI drivers

* Refactor zeal_color.* usage to quantum/color.*

* Updated Zeal65, fixed dynamic_keymap

* Major refactoring of Zeal60 backlight and API

* Lots of little cleanups

* Added readme.md

* Added readme.md

* Added LAYOUT_60*() macros, refactored and cleaned up default keymaps

* Fix compile error in suspend.c

* Added Zeal65 LAYOUT macros, info.json

* Added rama/m60_a, deleted zeal60/keymaps/m60_a

* Fixed rama/m60_a/keymaps/proto

* Fixed compilation error for suspend.c

* Requested changes for PR

* Fixed readme.md images

* Another readme.md fix

* Added drashna's requested changes
2018-09-13 14:37:13 -04:00
Takeshi ISHII
6d6d91c834 rgblight.[ch] more configurable (#3582)
* add temporary test code rgblight-macro-test1.[ch]

* rgblight.h : mode auto numberring and auto generate mode name symbol

No change in build result.

* rgblight.c use RGBLIGHT_MODE_xxx symbols

No change in build result.

* quantum.c use RGBLIGHT_MODE_xxx symbols

No change in build result.

* fix build break. when RGB_MATRIX_ENABLE defined

* add temporary test code rgblight-macro-test2.[ch]

* modify rgblight_mode_eeprom_helper() and rgblight_sethsv_eeprom_helper()

* modify rgblight_task()

* configurable each effect compile on/off in config.h

* update docs/feature_rgblight.md

* fix conflict. docs/feature_rgblight.md

* remove temporary test code rgblight-macro-test*.[ch]

* fix comment typo.

* remove old mode number from comment

* update docs/feature_rgblight.md about effect mode

* Revert "update docs/feature_rgblight.md about effect mode"

This reverts commit 43890663fcc9dda1899df7a37d382fc38b1a6d6d.

* some change docs/feature_rgblight.md

* fix typo

* docs/feature_rgblight.md update: revise mode number table
2018-09-13 10:24:09 -07:00
Drashna Jaelre
32ff7be266 Fix RG Sleep issues for Teensy Controllers
Appearenly, teensy controllers have some issues with waking up.  If the rgblight is called "too soon", it will cause the controller to lock up, intermittently. Adding a 10 ms
delay seems to fix this issue, as it lets it have enough time to handle things properly.

This has been tested extensively on my Ergodox EZ, and can be seen in the @drashna userspace, under the "suspend_wakeup_init_user" function.
2018-09-11 13:05:17 -07:00
patrickmt
e5465e1c57 CTRL and ALT updates
Added support to enter bootloader from software (bootloader version must be newer than "v2.18Jun 22 2018 17:28:08" until workaround for older is created).
Updated CTRL and ALT keymaps for entering bootloader with Fn+b held for >500ms.
Added basic MacOS keymap for ALT.
USB sleep LED indicator now turns off after 1 second.
Slowed down debug LED code printing.
2018-09-05 11:14:31 -07:00
Jack Humbert
a14eb01883 fix mousekey call 2018-09-03 16:59:32 -07:00
Steven Liu
fa1ee47cf2 Enable mouse keys in register_code and unregister_code
This allows for macros to be assigned to press two mouse directions at same time, which allows for one key diagonals.
2018-09-03 19:27:11 -04:00
ishtob
94f92cedef Fix emulated EEPROM start address on STM32F303 (#3819)
MCU has 254 flash, changed 250 to 254. tested working on a planck rev6
2018-08-31 07:37:13 -07:00
yiancar
621ce29a53 STM32 EEPROM Emulation (#3741)
* STM32 EEPROM Emulation

- Added EEPROM emulation libaries from libmaple and Arduino_STM32. https://github.com/rogerclarkmelbourne/Arduino_STM32 and https://github.com/leaflabs/libmaple.
- Renamed teensy EEPROM library and added conditional selection of library.
- Remapped EEPROM memory map for 16 byte blocks (as is with STM32f3xx MCUs).
- Added EEPROM initialization in main.c of Chibios.
- Added EEPROM format to clear the emulated pages when EEPROM is marked as invalid.

* Fixed ifdef
2018-08-29 16:14:49 -04:00
patrickmt
30680c6eb3 Massdrop keyboard support (#3780)
* Massdrop SAMD51

Massdrop SAMD51 keyboards initial project upload

* Removing relocated files

Removing files that were relocated and not deleted from previous location

* LED queue fix and cleaning

Cleaned some white space or comments.
Fix for LED I2C command queue.
Cleaned up interrupts.
Added debug function for printing numbers to scope through m15 line.

* Factory programmed serial usage

Ability to use factory programmed serial in hub and keyboard usb descriptors

* USB serial number and bugfix

Added support for factory programmed serial and usage.
Incorporated bootloader's conditional compiling to align project closer.
Fixed issue when USB device attempted to send before enabled.
General white space and comment cleanup.

* Project cleanup

Cleaned up project in terms of white space, commented code, and unecessary files.
NKRO keyboard is now using correct setreport although KBD was fine to use.
Fixed broken linkage to __xprintf for serial debug statements.

* Fix for extra keys

Fixed possible USB hang on extra keys report set missing

* I2C cleanup

I2C cleanup and file renames necessary for master branch merge

* Boot tracing and clocks cleanup

Added optional boot debug trace mode through debug LED codes.
General clock code cleanup.

* Relocate ARM/Atmel headers

Moved ARM/Atmel header folder from drivers to lib and made necessary makefile changes.

* Pull request changes

Pull request changes

* Keymap and compile flag fix

Keymap fix for momentary layer.
Potential compile flag fix for Travis CI failure.

* va_list include fix

Fix for va_list compile failure

* Include file case fixes

Fixes for include files with incorrect case

* ctrl and alt67 keyboard readme

Added ctrl and alt67 keyboard readme files
2018-08-29 15:07:52 -04:00
Alex Ong
3cf7f7322c Removed "debounce_algo = manual" in all keyboards with CUSTOM_MATRIX = yes. 2018-08-29 10:19:36 +10:00
fauxpark
700aa8fe1c Tidy up keycode.h (#3666)
* Tidy up keycode.h

* Fix spacing here

* Add back this comma
2018-08-16 12:12:48 -04:00
Jack Humbert
0284431ad9 add col type defines 2018-07-20 23:09:25 -04:00
Max Audron
bbea9dadbc Integrating Peter Fleury's HD44780 LCD library (#3209)
* integrated Peter Fleury's LCD library for HD44780 LCDs

* fixed typo

* cleanup finished

* add documentation

* added HD44780 documentation

* removed keyboard from .gitmodules

* resolved merge conflict

* removed edit of kira75s rules.mk made by merge

* moved hd44780 to drivers/avr

* Added licence info to hd44780 files

* Added link to hd44780 docs.
2018-07-15 13:31:45 -04:00
Evgeniy Petukhov
03381962ac Diagonal micro move fix 2018-06-28 22:10:53 -04:00
Drashna Jaelre
526eabb6f8 Make sure that both RGBLIGHT_ENABLE is defined, for RGBLIGHT_SLEEP 2018-06-28 22:08:26 -04:00
Drashna Jaelre
ee3b9d2ef0 Disable JTAG in keyboard init
So that all boards, present and future will have JTAG disabled, even if using a custom matrix
2018-06-28 08:52:21 -04:00
Fred Sundvik
c5db272c91 Make sure the timer wraps around correctly independent of the os tick frequency 2018-06-28 08:51:30 -04:00
Drashna Jaelre
cb91320d6d Add Suspend functions (#3112)
* Add suspend functions

* Disable RGB code if it's disabled

* Add suspend code to ChibiOS for future compatibility

* Add keyboard_init functions

* Change where references so it will compile

* Wrong command chained in wake up kb function

* Fix non-feature file changes

* Add documentation

* Re-add matrix init docs

* add rgblight code to example

* Remove keyboard init stuff for separate PR
2018-06-03 17:57:35 -04:00
Drashna Jaelre
751719e6cb Add and fix _noeeprom functions to many of the RGB Underglow functions (#3070)
* And and fix _noeeprom functions to many of the RGB Underglow functions

* Many functions are unnecessarily calling the eeprom write code. The toggle/enable is command is especially guilty of this, as it writes to EEPROM 3 times.  But rgb mode writes twice, every time it's called. And init resets the rgb eeprom range and then writes back to it twice!
* Fixed the rgblight_sethsv_noeeprom to work as expected, by moving a lot of the code to a helper function.
* Added a noeeprom function for mode, enable, disable, and toggle functions. (didn't bother for increase/decrease stuff, and didn't add new keycodes)
* Add to predefined colors list
* Add new functions to manual/docs

* Update RGB Sleep feature to use _noeeprom

Because that's exactly what it should be doing, actually!
2018-05-29 11:05:22 -04:00
Leo Wzukw
2d38f45009 Fix dead link to USB keycodes doc (#3050)
* Fix dead link to USB keycodes doc

Link was dead and the fresher version I could find on usb.org is still older than this one.

Thus, WaybackMachine seems the best option.

* Fix dead link to USB keycodes doc, with 2 options

Give the WaybackMachine link (fresher and for reference of the content of the original link) and the usb.org one (older)
2018-05-26 08:51:51 -07:00
Drashna Jaelre
8729be5434 Fix compile issues for atmega328p 2018-05-20 21:30:14 -07:00
Gergely Nagy
38f204db30 Allow one-shot modifiers to be chained
Many a times one would want to use multiple modifiers with the same key,
preferably without having to hold anything, like `Ctrl+Shift+C` or
`Ctrl+Shift+V` to copy/paste in GNOME Terminal. To make this possible, we need
to be able to chain one-shot modifiers, so that we can have multiple of them
active at the same time.

The easiest way to accomplish this is that whenever we activate a one-shot
modifier, we apply it on top of the existing set, instead of re-setting the
state. When deactivating, either due to an interrupt, or due to a timeout, we
deactivate all oneshots anyway, so the clearing part is covered. When we turn
the one-shot modifier into a toggle, that will also clear all one-shot modifiers
first, so we covered that case too.

Fixes #2796, #1580, and #856.

Signed-off-by: Gergely Nagy <qmk@gergo.csillger.hu>
2018-05-14 10:09:28 -04:00
Jack Humbert
e7d4bc5291 enable eeprom for rgb matrix 2018-05-08 18:13:09 -04:00
U-LANDSRAAD\drashna
bdb718af0d Fix RGB Sleep code 2018-03-28 15:37:00 -04:00
skullydazed
7c9d5ace14 Generate API docs from source code comments (#2491)
* Generate api docs from source code

* Add a bunch of doxygen comments

* more doxygen comments

* Add the in-progress api docs

* script to generate docs from travis

* Add doc generation to the travis job

* make travis_docs.sh commit the work it does

* make sure the docs script exits cleanly
2018-03-22 02:50:38 -04:00
Drashna Jaelre
ff728a8a01 [Proposal?] Allow RGB Underglow to turn off when host is idle/asleep (#2104)
* Add RGB Underglow Sleeping

* Add RGBLIGHT_SLEEP to toggle/control RGB light behavior

* Update rgb docs

* Update for RGB disable command
2018-03-19 23:59:58 -04:00
fauxpark
a2e12faa19 Add CMD and WIN aliases for KC_GUI, GUI(kc), GUI_T(kc), etc. 2018-03-16 16:37:44 -04:00
Joe Wasson
5d771039ad Fix swap-hands tapping.
This is an inelegant hack for #2522 but makes things work. Basically we give `action.c` a chance to handle the hold event early so that we can swap the keyboard for later keys. Later, to allow the hold to happen again quickly we nuke the key record so that tapping is reset. I tried to find a cleaner way, honestly.
2018-03-16 16:33:43 -04:00
Joe Wasson
7230923b05 Rename ONEHAND_ENABLE to SWAP_HANDS_ENABLE for consistency 2018-03-16 16:33:43 -04:00
Fred Sundvik
8c2ae4a470 Fix reset for STM32 devices 2018-02-10 17:13:38 -05:00
fredizzimo
53ff8a31b6 Merge ChibiOS and LUFA descriptor support (#2362)
* Move lufa descriptor to protocol/usb_descriptor

* Try to compile usb_descriptor on ChibiOS

* Add lufa_utils for ChibiOS

Lufa USB descriptors for ChibiOS

* More lufa_util compatibility fixes

* First compiling version of shared USB descriptor

* Send the usb descriptors

* Fix the CONSOLE output on ChibiOS

* Add errors for unsupported interfaces

* Enable support for vitual serial port USB descriptors

* Implement virtual serial port for ChibiOS

* Cleanup the lufa_utils

Use the default lufa header files

* Add raw hid support for ChibiOS

This is completely untested

* Enable midi compilation on ChibiOS

* Move midi functionality out of lufa.c

* Don't register sysex callback when not needed

* ChibiOS compilation fixes

* Update ChibiOS submodule

* Fix the Midi USB descriptor

It didn't work properly when both Midi and Virtual serial port was enabled.

* Add MIDI support for ChibiOS

* Fix USB descriptor strings on ChibiOS

* Use serial usb driver for raw hid

* Generalize the ChibiOS stream like drivers

This makes the initialization much more simple and eliminates a lot of
the code duplication.

* Convert console output to chibios stream driver

* Fixes for ChibiOS update

* Update the ChibiOS contrib submodule

To include the usb data toggle synchronization fixes

* Fix duplicate reset enumeration on ChibiOS

* Add missing include

* Add number of endpoints check for ChibiOS

* Enable serial USB driver on all keyboards

* Add missing includes when API is enabled withot midi

* Add another missing inlcude
2018-02-08 15:07:46 -05:00
Fred Sundvik
a14d539ad6 Revert back to normal sleeping wait behaviour for STM32 2018-01-21 01:10:16 -08:00
Kenneth Aloysius
365b863578 Backlighting for JJ40 and underglow initialisation code (#2260)
* Cleanup Mechmini keymap. Once the custom RGB function is defined, there is no need to manually handle RGB code.

* Change default to KEYMAP_MIT, not KEYMAP_OFFSET

* Add custom RGB code for JJ40

* Reset Mechmini advertised power draw to 500. Will have to test actual maximum power draw later.

* RGB working on JJ40.

* Fix: saturation increase/decrease flipped

* Add new directory for my custom keymap with RGB keycodes

* Swap LAlt and LGUI

* Update JJ40 max power draw with measured value

* Update: fun40 rules.mk to enable underglow; earlier failed Travis CI

* Fix: init RGB LEDs on boot. Also added HHKB-like keymap for XD60.

* Super rudimentary backlight test, init RGB LEDs on boot

* Backlighting works - stays on for now

* Toggling working

* Now can override backlight.c functions. Problem was functions in backlight.c weren't called before due to a lack of matrix_scan_quantum() in matrix.c

* Timers not working

* Delete global.h

* Cleanup

* Compiles

* Good sign: LEDs stop working again

* Handle timer1 overflow

* Progress: fix: forgot to init

* Backlighting fully working now except breathing.

* Revert keymap to original keycodes

* Update XD60 keymap README

* Update JJ40 keymap with backlight toggles

* Breathing working just fine.

* Update references

* Add backlight_set() call

* Cleanup code to disable backlight

* Fix: does not compile

* Fix: missing call to rgblight_task.

* Testing with BACKLIGHT_BREATHING

* Cleanup

* Cleanup comments

* More commenting cleanup.

* Do not enable BACKLIGHT_BREATHING by default
2018-01-18 16:02:32 -05:00
Balz Guenat
4931510ad3 backlight breathing overhaul (#2187)
* add breathing to bananasplit

* backlight breathing overhaul

* fix the backlight_tick thing.

* fix for vision_division backlight

* fix a few keymaps and probably break breathing for some weirdly set-up boards.

* remove BL_x keycodes because they made unreasonable assumptions

* some fixes for BL keycodes

* integer cie lightness scaling

* use cie lightness for non-breathing backlight and make breathing able to reach true max brightness
2018-01-01 17:47:51 -05:00
fauxpark
b3bcafcc4b Unsign key argument in add_key_to_report 2017-12-19 09:25:26 -05:00
Colin T.A. Gray
bad839e6ac make 'layer_state_set' visible to user code 2017-12-15 13:23:30 -05:00
Colin T.A. Gray
3aec9a4354 fixes 'layer_state_cmp' when layer is '1' (aka layer 0, aka layer 1<<0) 2017-12-15 13:23:30 -05:00
Colin T.A. Gray
1620d78e73 helper to compare current layer_state to user layer
Performs the same bit comparison that the layer_move
functions perform
2017-12-08 16:09:47 -05:00
Jack Humbert
9fdc276260
Updates bootloader settings, adds file size check (#2029)
* pull fuse settings for bootloader jump

* fix 32a chips

* make automatic bootloader selection optional

* quantify bootloaders

* fixs #164, speeds up dfu reset

* fix for chips w/o usb

* missing an n

* fix bootloader sizes, use words for addresses

* fix bmini, pearl, and [[ issue, make things quiet

* ignore avr errors on arm for now

* update settings for the light

* document bootloader stuff

* add bootloader title
2017-11-27 23:08:21 -05:00
Colin T.A. Gray
3e2fd64279 I found a typo! 2017-11-22 11:40:46 -05:00
Seebs
39d3d92364 Allow multiple process_record() calls per scan
This is particularly relevant for, e.g., the ergodox EZ and
other keyboards with slow scan rates. Without changing the API or
behavior of individual process_record() calls, we allow a
configuration flag to make multiple calls in a single scan.

This will probably have miniscule effects on non-steno users,
and it's not enabled by default for any keyboards. Added note
about it to ergodox README.

Signed-off-by: seebs <seebs@seebs.net>
2017-11-21 00:20:52 -05:00
Takayuki Matsubara
27ee425892 add pgm_read_dword for Infinity ErgoDox
avoid the following error when `UNICODEMAP_ENABLE = yes`:

```
quantum/process_keycode/process_unicodemap.c:52:21: error: implicit declaration of function 'pgm_read_dword'
```
2017-11-06 12:09:54 -05:00
Jack Humbert
cf9f6bbd91 adds per-layer rgb color option to ez 2017-11-06 08:38:36 -05:00
tsankuanglee
04b9b62bdc RETRO_TAPPING (#1922)
* add RETRO_TAP: tap anyway, even after TAP_TERM, if no interruption

* consistent variable name

* add option doc

* change name for consistency

* make RETRO_TAPPING default to off
2017-10-31 11:15:22 -04:00
Joe Martin
b91ffba4be #1792 added in waits from tmk for locking switches
fixes #1792
2017-10-10 07:15:41 -10:00
Snipeye
ee13228486 Generic Pointing Device (#1767) 2017-10-06 07:13:08 -10:00
Fred Sundvik
25285a1c5a Don't process keycodes on the slave 2017-09-30 06:22:02 -10:00
skullydazed
5fd68266f5 Clueboard 60% support (#1746)
* initial clueboard_60 support

* LED lighting support

* fix the clueboard->clueboard_66 rename

* Add layout support to clueboard_60

* Fix the 60_iso layout so it's actually iso

* add a default keymap for AEK layout

* fix clueboard_17

* Fixup the ISO layouts

* Fix the `wait_ms()/wait_us()` definitions for chibios

* Fix up the wait_ms/wait_us hack. Reduce stack size.

* Add a missing #include "wait.h"

* commit files that should have already been comitted
2017-09-29 16:17:30 -07:00
Joe Wasson
bae1144a9f Fix compilation error when NO_ACTION_LAYER is defined. 2017-08-20 11:51:57 -04:00
Balz Guenat
2aa5e44640 some major steps toward making the usb-usb converter work 2017-08-15 23:14:41 -04:00
Martin Sandiford
c622423668 Remove floating point calculation in mouse move. Saves approx 650 bytes if no other floating point used. 2017-08-15 19:51:06 -04:00
That-Canadian
26650731d1 Added "EECONFIG_HANDEDNESS" to the eeconfig.h , because when RGB was enabled it was overwritting the old EECONFIG_HANDEDNESS address (10), so it is now on a non-conflicting addres (14).
Updated MiniDox split_util.h and eeprom files to reflect this change.

I recommend adding this to any split board that used these files, my changes will not effect them currently.
2017-08-13 14:24:04 -04:00
Joe Wasson
f30f12ec81 Add support for GeminiPR steno protocol.
This protocol breaks out "duplicate" keys into their own entry in the packet so that more complicated logic can be done on the software side, including support for additional languages and alternative theories.
2017-07-27 16:10:36 -04:00
Fred Sundvik
4087d6da0d Add wait support for tests 2017-07-08 21:59:51 -04:00
Fred Sundvik
4e69a8bda6 Add basic timing support, and SFT_T tests
Also expose some bugs...
2017-07-08 21:59:51 -04:00
Jack Humbert
23df3016e8 Merge pull request #1405 from cquiroz/oneshot-mods-timeout
Oneshot mods timeout
2017-06-20 11:40:10 -04:00
Fred Sundvik
0f163c0028 Add todo to timer.c 2017-06-19 00:24:32 +03:00
Fred Sundvik
6a76192fa4 Fix problems with undefined inlines in debug mode 2017-06-18 21:22:22 +03:00
Fred Sundvik
fb95d86b39 Move functions for adding keys from to reports to report.h 2017-06-18 21:22:22 +03:00
Fred Sundvik
017458a07b Move functionality from action_util to report
The functions also takes report_kebyoard_t parameters, so that they can
be used elsewhere.
2017-06-18 21:22:22 +03:00
Fred Sundvik
c588fca06c Empty bootloader_jump 2017-06-18 21:22:22 +03:00
Fred Sundvik
d29906cb64 Emulate eeprom 2017-06-18 21:10:42 +03:00
Fred Sundvik
f646f00b93 Rename native to test 2017-06-18 21:10:42 +03:00
Fred Sundvik
83509adc3a Add empty timer functions 2017-06-18 21:10:42 +03:00
Fred Sundvik
26eb97a4a8 Empty implementation of bootloader, suspend and timer 2017-06-18 21:10:42 +03:00
Fred Sundvik
fdfd48e8c8 Fix program mem functionality 2017-06-18 21:10:42 +03:00
Fred Sundvik
efaf0e830b Empty implementation of wait 2017-06-18 21:10:42 +03:00
Carlos Quiroz
74d752b531 Remove noisy debug line 2017-06-18 12:17:51 -04:00
Carlos Quiroz
3ab0f4d9e5 Deactivate oneshot mods once timedout 2017-06-18 12:17:51 -04:00
Jack Humbert
51a86b85f3 Merge pull request #1361 from fredizzimo/ergodox_infinity_backlight
Add Ergodox Infinity backlight support
2017-06-18 10:15:02 -04:00
Fred Sundvik
ec88a0b3cc Make sure that the backlight level is within the right range 2017-06-16 02:05:38 +03:00
Adam Bell
4ab61344f5 Adding permissive_hold 2017-06-03 10:28:46 -04:00
Jack Humbert
b6c60333e4 Re-enable mouse buttons 2017-05-29 13:21:38 -04:00
dbroqua
81e85a1a4e - Added integration of IBM Trackpoint 2017-05-26 20:35:31 +02:00
jerryen
9c284786e7 Workaround for the macOS caps lock delay (#1308)
* Add 80ms delay for KC_CAPS when used as a tap key

Workaround for the macOS caps lock delay

* Revert "Increase TAPPING_TERM for the Clueboard"

This reverts commit a74e69e9fa.
2017-05-19 17:24:47 -07:00
Jeremiah
25c6ca750f added comments and made function name clearer 2017-05-14 15:36:44 -07:00
Jeremiah
84395e8a04 whoops 2017-05-14 09:36:50 -07:00
Jeremiah
b9b2244b82 faster, less bits :) 2017-05-14 08:01:01 -07:00
Jeremiah
63d9698d5c faster and less bits... again 2017-05-13 19:07:05 -07:00
Jeremiah
37f6f92765 faster and less bits 2017-05-13 18:24:43 -07:00
Jeremiah
7b7e285a98 should be using matrix_row_t 2017-05-13 17:22:38 -07:00
Jeremiah
acd3e97b83 a bit smaller 2017-05-13 17:01:27 -07:00
Jeremiah
99877cdff3 a bit smaller 2017-05-13 16:57:23 -07:00
Jeremiah
b9895771ed improvements 2017-05-13 13:19:28 -07:00
Jeremiah
849ed5a6a0 anti-ghost improvement for older keyboards with empty spots in matrix 2017-05-13 08:51:20 -07:00
Nephiel
bd2c0b9648 Call led_set for layer action events to update LEDs on layer changes 2017-05-10 19:26:39 +02:00
Fred Sundvik
07fc34e962 Fix warnings when ACTION_ONESHOT is disabled 2017-04-13 16:00:29 +03:00
Fred Sundvik
abda6ff7bb Include host.h from suspend.c 2017-04-13 16:00:29 +03:00
Fred Sundvik
737c1fe641 Make MOUSEKEY_MOVE_MAX and MOUSEKEY_WHEEL_MAX configurable
Kitten_paw/ickerwx was doing that
2017-04-13 16:00:29 +03:00
Fred Sundvik
6039a4f6ed Empty implementation of has_onshot_mods_timed_out
When the timeout is zero or not defined, the function now returns false.
Fixes a linker error when the visualizer is enabled
2017-04-09 18:34:59 +03:00
Zay950
2366ebfbbd Merge branch 'master' into to_push 2017-03-29 12:00:38 -07:00
Jack Humbert
216f669276 Merge pull request #1098 from lambdalisue/tapping-force-hold
Add TAPPING_FORCE_HOLD to regulate behaviour
2017-03-28 09:24:22 -04:00
Phong Nguyen
d0b4dcc82c Removes redundant {} which cause build failure when DEBUG_ACTION is set 2017-02-25 19:50:46 +07:00
Jack Humbert
7bef285553 Merge pull request #1101 from priyadi/layer_state_set_kb
Add weak layer_state_set_kb hook
2017-02-14 21:33:04 -05:00
Priyadi Iman Nurcahyo
bd8d717f1f Fix bug fix attempt 2017-02-15 05:25:08 +07:00
Priyadi Iman Nurcahyo
d96175937b Bug fix & added default_layer_state_set_kb 2017-02-15 05:20:15 +07:00
Priyadi Iman Nurcahyo
d369bfb83a Add layer_state_set_kb hook 2017-02-15 05:02:15 +07:00
lambdalisue
64f9779fe5 Add TAPPING_FORCE_HOLD to regulate behaviour
See #889 for the detail.
2017-02-14 14:12:54 +09:00
Priyadi Iman Nurcahyo
c68e596f32 Implement faux-clicky feature 2017-02-13 08:03:07 +07:00
Jack Humbert
c0c69a1a7c Merge pull request #1068 from adzenith/master
Minor cleanup
2017-02-07 13:27:41 -05:00
Jack Humbert
3c7fa0acc1 Merge pull request #1046 from LukeSilva/master
Add Tapping Macros to QMK
2017-02-07 13:18:47 -05:00
Jack Humbert
b6ffda4849 Merge pull request #1010 from SjB/oneshot_timeout_fix
oneshot timeout would only timeout after an event.
2017-02-06 18:57:23 -05:00
Nikolaus Wittenstein
06d21009b2 Minor cleanup 2017-02-05 19:55:27 -05:00
SjB
45e0d09414 moved oneshot cancellation code outside of process_record.
The oneshot cancellation code do not depend on the
action_tapping_process and since process_record get called via the
action_tapping_process logic moved the oneshot cancellation code into
the action_exec function just before the action_tapping_process call
2017-01-29 13:01:47 -05:00
Luke Silva
a3357d078e Add support for various tapping macros
A macro key can now be easily set to act as a modifier on hold, and
press a shifted key when tapped. Or to switch layers when held, and
again press a shifted key when tapped.

Various other helper defines have been created which send macros when
the key is pressed, released and tapped, cleaning up the
action_get_macro function inside keymap definitions.

The layer switching macros require a GCC extension - 'compound
statements enclosed within parentheses'. The use of this extension is
already present within the macro subsystem of this project, so its use
in this commit should not cause any additional issues.

MACRO_NONE had to be cast to a (macro_t*) to suppress compiler
warnings within some tapping macros.
2017-01-28 18:42:35 +11:00
Luke Silva
87bc36253d Fix documentation for TMK actions 2017-01-26 22:44:22 +11:00
Jack Humbert
71137deba2 Merge pull request #1014 from SjB/lcd_mods_status
added mods status bit to visualizer.
2017-01-24 00:34:55 -05:00
Luiz Ribeiro
9ce38cbccf Simplified and polished a bit the code changes on tmk_core 2017-01-21 17:18:05 -05:00
Luiz Ribeiro
f7462aaa61 Got ps2avrGB to work with the V-USB protocol 2017-01-21 12:55:19 -05:00
SjB
9eb8d05246 added mods status bit to visualizer.
Since we can't read the real_mods and oneshot_mods static variable
directly within the update_user_visualizer_state
function (Threading and serial link). We are know storing the mods
states in the visualizer_keyboard_status_t structure. We can now
display the status of the modifier keys on the LCD display.
2017-01-17 21:57:32 -05:00
SjB
6f44ca7a59 oneshot timeout would only timeout after an event.
After setting a ONESHOT_TIMEOUT value, the oneshot layer state would
not expire without an event being triggered (key pressed). The reason
was that in the process_record function we would return priort to
execute the process_action function if it detected a NOEVENT cycle. The
process_action contained the codes to timeout the oneshot layer state.
The codes to clear the oneshot layer state have been move just in
front of where we check for the NOEVENT cycle in the process_record
function.
2017-01-15 23:29:24 -05:00
Wilba6582
d8a608f3ff Keycode refactor 2016-12-29 18:28:48 +11:00
Jack Humbert
c87d039839 Merge pull request #921 from Wilba6582/raw_hid
Initial version of Raw HID interface
2016-12-05 00:13:37 -05:00
Jack Humbert
ead68248c5 Merge pull request #913 from wez/ble_1
Tidy up atomicity in timer.c and ring_buffer.h
2016-12-02 13:12:19 -05:00
Wilba6582
fe001d46fd Initial version of Raw HID interface 2016-12-01 00:44:54 +11:00
Jack Humbert
6e0f994950 Merge branch 'master' of github.com:jackhumbert/qmk_firmware into wu5y7 2016-11-28 23:51:07 -05:00
Wez Furlong
be4e75423a Tidy up atomicity in timer.c and ring_buffer.h
Adopt the macros for saving/restoring the interrupt state
that are provided by the avr gcc environment.

Removing intialization of the timer value; this shaves off
a few bytes because globals are default initialized to zero.
2016-11-27 22:58:34 -08:00
Wilba6582
cf3926a8e1 Fixed NO_SUSPEND_POWER_DOWN handling 2016-11-23 19:45:50 +11:00
Wilba6582
5893f0fa1f Fixed NO_SUSPEND_POWER_DOWN handling 2016-11-23 16:22:57 +11:00
Jack Humbert
2b3a3ca678 Merge pull request #898 from PureSpider/backlight-fix
Set backlight status to on if it's at maximum brightness already and the brightness increase keybind is used
2016-11-22 18:41:37 -05:00
PureSpider
d37becc0a9 Set backlight status to on if it's at maximum brightness already and the brightness increase keybind is used
Before it was turned on but the status wasn't set to on, so you had to
push the backlight toggle bind twice to turn it off again
2016-11-22 22:12:57 +01:00
Jack Humbert
6390033e86 cleaning up midid 2016-11-21 20:14:16 -05:00
Zach Nielsen
59bef40aab Keep unicode's input_mode through a power cycle 2016-11-10 12:14:54 -08:00
IBNobody
4c6960835c Refactoring Matrix scanning 2016-10-28 16:24:20 -05:00
IBNobody
508eddf8ba Fixing Debounce - WIP 2016-10-28 14:21:38 -05:00
IBNobody
17170ba76d Fixed some large keyboard bugs
Fixed some bugs relating to keyboards with more than 16 columns. Also
added the ability to mask off keyboard matrix bits.
2016-10-23 23:00:43 -05:00
IBNobody
78767bf208 Fix #770, Fix #779 2016-09-28 20:26:41 -05:00
Didier Loiseau
d430999047 Fix issue #772 Meh and Hyper not working 2016-09-23 01:20:49 +02:00