* Add Planck keymap and custom keycodes to userspace
* Add Preonic keymap and extract common ortho layers and keycodes
* Add Leaf60 WKL keymap
* Add M60-A keymap
* Add Levinson keymap
* Fix links in personal readmes
* Use flash target
* Remove duplicate definition
Co-Authored-By: fauxpark <fauxpark@gmail.com>
* Remove superfluous line endings
* Planck and preonic encoder should have the same behavior
* Use higher level API
Co-Authored-By: fauxpark <fauxpark@gmail.com>
* Use layouts to reduce planck/levinson duplication
* Update flash instructions for levinson
While this was historically a valid possibility, nowadays, it reads
kinda weird, and the [Oxford Dictionaries Online suggests to avoid it](https://english.stackexchange.com/a/56010).
Thus, I removed it everywhere I found it.
* Setup keymaps and userspace for Rishka
* Creates a keymap for Ergodox Ez, bdn9 and Dactyl Manuform 5x6
* Update bdn9 config with suggested change
* Add pragma to other header files
* Apply suggestions from code review
Co-Authored-By: fauxpark <fauxpark@gmail.com>
* Updates from review from fauxpark
* Updates from review
Swap to keyboard_post_init, layer_state_t and use layer state for encoder
* Updates from review
Swap to keyboard_post_init, layer_state_t and use layer state for encoder
* Add missing change from review
* Add a short explanation to the troubleshooting section
While translating I noticed that the troubleshooting section could use a
little bit more explanation. @Yanfali was so kind to chime in on this on
discord and explained that this was ment for people who accidently
forget to put their board in bootloader mode, so I added this as a
possible common mistake.
Also fixed the spelling of Msys2 to MSYS2 and Halfkay to HalfKay as
these are the official spellings they use themselves.
* Update driver_installation_zadig.md
* Update driver_installation_zadig.md
English is hard.
* Update docs/driver_installation_zadig.md
Co-Authored-By: fauxpark <fauxpark@gmail.com>
* Update docs/driver_installation_zadig.md
Co-Authored-By: fauxpark <fauxpark@gmail.com>
* Keyboard Naked48 Update
Support for SPLIT_KEYBOARD
Readme updates
Keymap updates
Support for RGB matrix (salicylic keymap)
* Keymap Update
Change KC_NO to KC_TRANSPARENT.
Update the old part.
* Enable PERMISSIVE_HOLD and TAPPING_FORCE_HOLD
* Fix indentation in userspace
* Shuffle around more Lily58 symbol keys
* Reformat KBD67 keymap and KLE images
* Fix Lily58 lower layer image
* Reformat Quefrency keymap and KLE images
* Fix KBD67 KLE images... again
* Add KLE links for Quefrency
* Reformat 60% layouts and KLE images
* Move Super key back to right half of Lily58
* Move Lily58 ins/del out of the way of numbers
* Fix bottom row of Lily58 KLE image
* Initialize ergodash rev 1 keymap
./util/new_keymap.sh ergodash/rev1 yet-another-developer
* Add user space configurations referenced from drashna
* Start community layout for ergodash in ortho_5x14
* Remove unused layers
* Add userspace layers
* Add Userspace gitignore
Hide Secrets
* Remove userspace unused drashna features
* Scrap default keymap and follow drashna's template
* Add code referenced from kuchosauronad0
* Make sure that the author is named Developer
* Replace middle keys del and bksp with curly brace
* Reduce ONESHOT_TIMEOUT from 3sec to 2sec
* Remove adjust key AG_SWAP
* Disable UNICODEMAP_ENABLE, remove code causing build fail
* Increase TAPPING_TERM to 240
Reason: Because Space is also LOWER, space sometimes not registering.
PS: I dont want to #define RETRO_TAPPING yet
* Update KC_MAKE to use :flash
* Remove TAP_ONCE, use tap_code
Signed-off-by: Developer <anotherdeveloper@icloud.com>
* Remove redundant code implementation of keyboard_post_init_user
https://github.com/qmk/qmk_firmware/pull/7046
users/yet-another-developer/leader.c
```
static bool has_ran_yet;
if (!has_ran_yet) {
has_ran_yet = true;
startup_user();
```
Comment for lines +11 – +14
@drashna: Not needed anymore. You can use keyboard_post_init_user now.
Signed-off-by: Developer <anotherdeveloper@icloud.com>
* rebaselined the whole fork and added cool matrix animations
* Updated dfu bootloader rules, oleds working on test map
* Moving test branch into main
moving my _test branch files into the main since the repo is now in the dev branch, don't see any reason to keep separate folders.
* Update keymap.c
Adding DOT to number layer
* added LED sleeping
* working on getting matrix rgb to sleep upon usb suspend
uploading to github for qmk staff help
* Added master sleep on usb suspend
Unfortunately the sleep function does not work on the slave side so will probably revert this change later
* bringing hhkb config up to current with other tominabox1 configs
* Update config.h
since master side is the only one that sleeps, going to disable this for now.
* testing oled stuff
* Update rules.mk
* tinkering with oled still
* Finally fixed custom image with corne doug
* Adding keymap to dimple instead of screwing up the upstream references.
* Changed oled image to peepo ggers
* working on oled sleep
* Update keymap.c
* fixes oled wake/sleep issues
* Adding 🅱️ and BEPIS macros
* Update .gitignore
* Cleaning up and improving documentation
* Update keymap.c
* Adding my minivan keymap
* Fixed error on keymap
* fixed OLEDs not turning on and moved tapping term to the keymap file
* Changed tapping term from 200 to 250
* Revised Fkey layers, arrows, question mark locations
* Update keymap.c
* tweaked tapping term and types on CRKBD, revised layout on HHKB
* Update keymap.c
* general code cleanup, keymap displays
* Set up userspace for common keymap elements
* tapping term stuff for shift
* testing
* Fixed new tapdance for accessing number and fkey layers
* Update tominabox1.h
* stuff
* fixing function calls for userspace
* cleaning up crkbd config and moving stuff to userspace
* finally fixed oled lightup issues
* cleaning up a few maps and rules
* Removing permissive hold and returning spacefn to all boards.
* Settting up wrapper keymaps for Dimple, Minivan, and Corne
Wrappers
* small tweaks
* Update wrappers.h
* finishing wrappers on Minivan and Dimple
* Revised tapping term definition
Providing additional tapping term config for CRKBD only.
* Code cleanup and documentation
* Update readme.md
* Update readme.md
* Wrapers and continued code cleanup and documentation
* moved oled py scripts to user folder
* completed wrapper implementation of CRKBD
* added matrix startup mode - not working yet pending upstream changes
* removed unused code in tominabox1.c
* Fixing custom keycodes and tap dance indices
fixed custom keycodes and tap dance indices
Adding beginning of dimple RGB matrix definition
changed oled on corne to scrolling matrix thing
Added copy pasta
* Secondary layer tweaks
Swapping hands of numbers and symbols as well as tweaking tapping terms accordingly
* Update tominabox1.c
Continued refinement of tapping term to support better right hand symbol access.
* Fixes from pr 7014
Removed gitignore data from qmk master
Reverted changes to Drashna's crkbd keymap
Accepted changes to crkbd keymap
Added ignore to hhkb keymap - I think I need this because Teensy. Will revisit another time
* Removing hhkb keymap for rework
* Adding back hhkb keymap
Re-adding hhkb folder with ignores
* Reverting changes to Dimple default
totally did not intend to modify these
* Update keymap.c
Reverting changes to Drashna's corne map
* Accepting recommended changes
* Reduced tap hold caps delay
moved bootmagic enable to general usage
Revised tapping terms
Removed unused keycode defs
* bootmagic
* Update rules.mk
* Fixed permissions (support 7014) and bootmagic addition
Fixed permissions on Drashna's keymap and Dimple default keymap files.
Adding bootmagic to my crkbd config.
* Fixing permissions
* First draft of my layout
* Improved layout and cleanup of files
* Update keymap and add rules
* Add keymap.h with permissive_hold setting
* Rename keymap.h to correct name config.h
* Add next/prev and special lock key to Fn layer
* Use correct modifier in MY_LOCK command
* Removed unnecessary filler defines
* Add build instructions to README
* Move RGB controls to more logical up/down key positions, move next/prev controls, remove del from Fn layer
* Fix wrong placeholders and fix up formatting
* Remove unused code
* Clarify comments on custom defines
* Update keyboards/kbdfans/kbd6x/keymaps/mekberg/rules.mk
Co-Authored-By: fauxpark <fauxpark@gmail.com>
* Version 1 of keymappings
* Adding updated keymappings
* Adding hash/pound symbol to layer
* Removing broken macros
* Adding to readme. Amending value of pound sign
* Changing language in readme
* Addressing PR comments. Removing unneeded code, corrected syntax
* Removing commented out code and fixing white space issues
* Small clean up to readme
* Add a via compatible keymap
* Disable VIA on default for configurator
- use the via keymap if you want via support
* Move wilba dep to keymap avoid breaking community
- moves via specific includes into the _via keymap
- fixes configurator builds
* Avoid NO_USB_STARTUP_CHECK - Disable USB as checks seem to enable it somehow
* Update quantum/split_common/split_util.c
Co-Authored-By: fauxpark <fauxpark@gmail.com>
* Also remove NO_USB_STARTUP_CHECK from vitamins_included/rev1
* Move tmk_core/common/backlight to quantum/backlight
* Add guards to backlight inclusion
* Add guards to backlight inclusion
* Update backlight guards on clueboard/60
* Use full paths to avoid vpath issues
* Change RGBLight pin for Planck Light
Move it to A0, so that the SPI? pins are available for BT hackery
* Add QMK DFU bootloader info
* Add Solenoid
* Disable annoying white LED on bottom
* Enable Solenoid on Corne
* Remove bounds for animations
* Increase debounce for Ergodox EZ to reduce repeat key issues
* Set swap hands key to be a hold-tap key
This way, it's not ANNOYING and doesn't swap the hands inteniontally
* Move MT Alt in Corne keymap
* Re-Add fine tuned control of secrets
* Squash mods to single row
* Add LRA settings to haptic feedback settings for Rev6
* Fix issue with non-Planck EZ keymaps
* Add 40 Percent Nano with Analog Joystick
* Add Collide39 keymap
* Fix OLED printing to be more flavorful
* Fix up Iris GamePad and come cleanup
* Expand OLED char map further
* Add modded characters to keylogger
* Here be dragons
Co-Authored-By: noroadsleft <18669334+noroadsleft@users.noreply.github.com>
* Fix up rules for community layouts
* Some more OLED tweaks
* Add mod mask check function
* Change QMK DFU Audio pin to be correct
* Use manual STM config instead of CTPC for Collide 39
* Fix off-by-one error in Lily58 function keys
* Swap number and symbol layers
* Move grave/tilde to the left of brackets/braces
* Add KLE links
* Move function keys to Raise layer
* Move symbols nearer to home row
* Add readme for Lily58 layout
* add temporary test shell-spript
* Use LINK_TIME_OPTIMIZATION_ENABLE instead of Link_Time_Optimization
No change in build result.
* Helix config.h use '#pragma once'
No change in build result.
* Helix helix.h,rev?/rev?.h,pico/pico.h use '#pragma once'
No change in build result.
* Use drivers/avr/pro_micro.h instead of keyboards/helix/pro_micro.h
No change in build result.
* remove keyboards/helix/{rev2|pico}/serial_config.h
No change in build result.
* 'HELIX_ROWS' macro is now referenced only in rev1/config.h and rev2/config.h.
No change in build result.
* The contents of helix/rules.mk were distributed to subdirectories.
This is a preparation to create a new subdirectory for helix code using split_common.
No change in build result.
remove 'USE_I2C = yes', 'SUBPROJECT_rev1 = no' from keyboards/helix/rules.mk.
follow code move from keyboards/helix/rules.mk to keyboards/helix/{rev1,rev2,pico}/rules.mk.
----
SRC += i2c.c
SRC += serial.c
SRC += ssd1306.c
CUSTOM_MATRIX = yes
---
* helix/{i2c.[ch], serial.[ch], ssd1306.[ch]} move into helix/local_drivers/
No change in build result.
* Simplified 'helix/pico/keymap/*/rules.mk' using KEYBOARD_LOCAL_FEATURES_MK.
No change in build result.
* add keyboards/helix/pico/local_features.mk
* add 'KEYBOARD_LOCAL_FEATURES_MK := $(dir $(lastword $(MAKEFILE_LIST)))local_features.mk' into keyboards/helix/pico/rules.mk
* remove HELIX_CUSTOMISE_MSG from keyboards/helix/pico/keymaps/*/rules.mk
* remove HELIX= process from keyboards/helix/pico/keymaps/*/rules.mk
* remove convert code(helix to standaerd) from keyboards/helix/pico/keymaps/*/rules.mk
* add 'include $(strip $(KEYBOARD_LOCAL_FEATURES_MK))' into keyboards/helix/pico/keymaps/*/rules.mk
* Simplified 'helix/rev2/keymap/*/rules.mk' using KEYBOARD_LOCAL_FEATURES_MK.
No change in build result.
* add keyboards/helix/rev2/local_features.mk
* add 'KEYBOARD_LOCAL_FEATURES_MK := $(dir $(lastword $(MAKEFILE_LIST)))local_features.mk' into keyboards/helix/rev2/rules.mk
* remove HELIX_CUSTOMISE_MSG from keyboards/helix/rev2/keymaps/*/rules.mk
* remove HELIX= process from keyboards/helix/rev2/keymaps/*/rules.mk
* remove convert code(helix to standaerd) from keyboards/helix/rev2/keymaps/*/rules.mk
* add 'include $(strip $(KEYBOARD_LOCAL_FEATURES_MK))' into keyboards/helix/rev2/keymaps/*/rules.mk
* Added helix keyboard build NEW method.
No change in build result.
## Helix build
$ make helix:default ## no oled, no backlight, no underglow
$ make helix/rev2/back:default ## no oled, with backlight, no underglow
$ make helix/rev2/under:default ## no oled, no backlight, with underglow
$ make helix/rev2/oled:default ## with oled, no backlight, not underglow
$ make helix/rev2/oled/back:default ## with oled, with backlight, no underglow
$ make helix/rev2/back/oled:default ## with oled, with backlight, no underglow
$ make helix/rev2/oled/under:default ## with oled, no backlight, with underglow
$ make helix/rev2/under/oled:default ## with oled, no backlight, with underglow
## Helix pico build
$ make helix/pico:default ## no oled, no backlight, no underglow
$ make helix/pico/back:default ## no oled, with backlight, no underglow
$ make helix/pico/under:default ## no oled, no backlight, with underglow
$ make helix/pico/oled:default ## with oled, no backlight, not underglow
* add temporary test shell-spript
* test end remove test script. Revert "add temporary test shell-spript"
This reverts commit 5dac20cd0f8b4bc192edb2313652c1635f829657.
* test end remove test script. Revert "add temporary test shell-spript"
This reverts commit ec49f63b2dc0f2b3fe8c1c36ffa615cee2f7e3ed.
* Extended the 'HELIX=' option. add keyword 'verbose', 'no_ani'.
No change in build result.
* update keyboards/helix/{rev2,pico}/keymaps/default/readme.md
* rename KEYBOARD_TOP_DIR to HELIX_TOP_DIR in rules.mk
* update keyboards/helix/{rev2,pico}/keymaps/default/readme_jp.md
* rm keyboards/helix/pico/oled/rules.mk
* update helix's readmes. All the ':avrdude' was replaced with ':flash'.
* remove F_CPU, ARCH, F_USB, INTERRUPT_CONTROL_ENDPOINT from helix/rules.mk
No change in build result.
* Revert raise/backspace mod tap to just backspace
* Initialize usb_usb/narze
* Modify keys
* Add readme
* Support Right shift to )
* Add Dev layer
* Use Dev layer on holding z key
* Add Dev layer for Ergodox
* Update keyboards/converter/usb_usb/keymaps/narze/README.md
Fix the command & close the code block as suggested
Co-Authored-By: Drashna Jaelre <drashna@live.com>
* Reduce rules
* Add dz60 keymap
* Add my TADA68 layout
* Fix descriptions and formatting
* Formatting fixes
* Add readme file
* Formatting
* move caps lock to correct key, add F-keys to both layers
* Add readme for dz60
* First draft of custom Let's Split layout
* Some more keys
* Finalized keymap
* Added a bunch of custom shortcuts to make layout easier to read
* Add PERMISSIVE_HOLD option to modtap behavior
* Add lock and sleep shortcuts, formatting
* Minor fixes and adjustments
* Add PERMISSIVE_HOLD option, add sleep/lock shortcuts, minor fixes
* Add sleep/lock shortcuts, minor fixes
* fixups
* Major simplification of lets_split layout into more standard raise/lower/special layers
* Remove layer songs, add to readme
* Formatting
* Switch a few keys around for reachability
* Add windows/mac specific layers
* simplify layers
* Update README
* Fix legends
* Invert numpad and put Del in upper right corner
* Disable arrow keys on Raise, add build instructions
* Move dz60 keymap to its own branch
* Remove redundant configuration
* Change volume and sleep keycodes to standard
* Removing empty rules.mk
* Changing layer defines to enum
* Adding comment to explain reason for swapping KC_TRNS and KC_NO fillers
* Adding profile for Corne with tap dance Swedish support.
* Remove extern keymap_config_t keymap_config as no longer needed
* Changed to use tap_code over register_code
* Removed persistent_default_layer_set
* Moved macros to hvp user space ink tap dance code
* Removed not used functions
* Moved to an ifbased include statement
* Removed not needed characters
* initial commit
* OLEDに表示するロゴをuzuのものに差し替えた
* delete undefault keymaps
* delete info.json
* delete pro_micro.h
* remove USE_Link_Time_Optimization check
* Moved constant defined for each keymap.c to rev1.h
* update layer_state_reader.c
* Rename Uzu42 to uzu42
* remove bootloader.h include
* LAYOUT_kc to LAYOUT
* delete keymap level rules.mk
* update readme.md
* remove persistent_default_layer_set function.
* try refactor to use split_common and use OLED driver
* Revert "try refactor to use split_common and use OLED driver"
This reverts commit 5a9afceacb450ca9eca8a146b64c24d0e0925dd8.
* Update keyboards/uzu42/rev1/config.h
Co-Authored-By: fauxpark <fauxpark@gmail.com>
* Update keyboards/uzu42/rev1/rev1.h
Co-Authored-By: fauxpark <fauxpark@gmail.com>
* Update keyboards/uzu42/rev1/rev1.h
Co-Authored-By: fauxpark <fauxpark@gmail.com>
* Update keyboards/uzu42/rules.mk
Co-Authored-By: fauxpark <fauxpark@gmail.com>
* Remove lines already defined in QMK
* Update keyboards/uzu42/rules.mk
Co-Authored-By: fauxpark <fauxpark@gmail.com>
* Update keyboards/uzu42/rules.mk
Co-Authored-By: fauxpark <fauxpark@gmail.com>
* Update keyboards/uzu42/rules.mk
Co-Authored-By: fauxpark <fauxpark@gmail.com>
* replaced comment block
* Update keyboards/uzu42/config.h
Co-Authored-By: Drashna Jaelre <drashna@live.com>
* Revert "Revert "try refactor to use split_common and use OLED driver""
This reverts commit a7849216f49a411558d4cfdcfbf3e202defe892a.
* fix setting for RGBLED
* The default of OLED_DRIVER_ENABLE has been changed to no.
* Delete unuse block.
* Remove unnecessary keycode definitions.
* Remove unuse custom keycode.
* Remove not needed code.
* Remove not called code.
* Remove code overwritten by the core.
* Remove LAYOUT_kc macro.
* Moved the definition of the layer block to keymap.c.
* Removed unuse variable.
* Remove code overwritten by the core too.
* incorporate layer changes
* Moved src rule to keymap from rev1.
* Removed rgb_state_reader.c from lib folder and the code move to the keymap.c
* Removed layer_state_reader.c from lib folder and the code move to the keymap.c
* Removed logo_reader.c from lib folder and the code move to the keymap.c
* Removed keylogger.c from lib folder and the code move to the keymap.c
* Moved glcdfont_uzu42.c from lib folder to the default keymaps folder.
* Removed unused files.
* - Enabled Unicode Feature to fix the build
- Added TapDance Feature to improve the functionality of the Keyboard
- Added the ability to switch between the Unicodes Modes
- Added more Emojis thanks to the tap dance feature
* Fix Format
