[core] fix rgb source include

Updated README in ergodox_infinity keyboard (#1702 )
* changed 'infinity' to 'ergodox_infinity' and specified to be in the top-level directory as per recent changes to directory structure of QMK_firmware git repo * accidently removed '-' in last line of readme
2017-09-15 22:12:25 -04:00 · 2017-09-15 22:01:51 -04:00 · 2017-09-15 22:00:26 -04:00 · 2017-09-15 21:59:56 -04:00 · 2017-09-15 21:44:39 -04:00 · 2017-09-15 21:43:58 -04:00
23 changed files with 869 additions and 44 deletions
--- a/common_features.mk
+++ b/common_features.mk
@@ -93,10 +93,14 @@ endif

 ifeq ($(strip $(RGBLIGHT_ENABLE)), yes)
    OPT_DEFS += -DRGBLIGHT_ENABLE
-    SRC += ws2812.c
    SRC += $(QUANTUM_DIR)/rgblight.c
    CIE1931_CURVE = yes
    LED_BREATHING_TABLE = yes
+    ifeq ($(strip $(RGBLIGHT_CUSTOM_DRIVER)), yes)
+        OPT_DEFS += -DRGBLIGHT_CUSTOM_DRIVER
+    else
+	    SRC += ws2812.c
+    endif
 endif

 ifeq ($(strip $(TAP_DANCE_ENABLE)), yes)
--- a/drivers/avr/ws2812.h
+++ b/drivers/avr/ws2812.h
@@ -28,23 +28,7 @@
 //#include "ws2812_config.h"
 //#include "i2cmaster.h"

-#ifdef RGBW
-  #define LED_TYPE struct cRGBW
-#else
-  #define LED_TYPE struct cRGB
-#endif
-
-
-/*
- *  Structure of the LED array
- *
- * cRGB:     RGB  for WS2812S/B/C/D, SK6812, SK6812Mini, SK6812WWA, APA104, APA106
- * cRGBW:    RGBW for SK6812RGBW
- */
-
-struct cRGB  { uint8_t g; uint8_t r; uint8_t b; };
-struct cRGBW { uint8_t g; uint8_t r; uint8_t b; uint8_t w;};
-
+#include "rgblight_types.h"


 /* User Interface
--- a/keyboards/atreus/keymaps/dvorak_42_key/README.md
+++ b/keyboards/atreus/keymaps/dvorak_42_key/README.md
@@ -0,0 +1,21 @@
+Overview
+========
+
+This is a dvorak based layout for the Atreus. Its basic key layout is similar to the ergodox_ez "dvorak_42_key" layout. In fact this layout was created for seamless switching between the Ergodox EZ and Atreus. 
+
+How to build and flash
+----------------------
+
+to build;
+make atreus-dvorak_42_key
+
+to flash:
+avrdude -p atmega32u4 -c avr109 -U flash:w:atreus_dvorak_42_key.hex  -P COM7
+
+Layers
+------
+* BASE: basic dvorak layout
+* KEYNAV: arrow-key navigation. Momentary toggle held by thumb allows the right hand to navigate through text as well as copy/paste/cut, page up/page down
+* KEYSEL: similar to KEYNAV, except for shift-selection
+* COMBINED: this is a layer that combines numbers, brackets and special characters. !@#$%^&*( can be type by shift+COMBINED+1/2/3/etc..
+* MOUSE: mouse navigation, as well as browser tab-left/tab-right shortcuts
--- a/keyboards/atreus/keymaps/dvorak_42_key/config.h
+++ b/keyboards/atreus/keymaps/dvorak_42_key/config.h
@@ -0,0 +1,106 @@
+/*
+Copyright 2012 Jun Wako <wakojun@gmail.com>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#ifndef CONFIG_H
+#define CONFIG_H
+
+
+#include "config_common.h"
+
+
+// mouse speed
+
+#define MOUSEKEY_INTERVAL       15
+#define MOUSEKEY_DELAY          100
+#define MOUSEKEY_TIME_TO_MAX    100
+#define MOUSEKEY_MAX_SPEED      3
+
+#define MOUSEKEY_WHEEL_DELAY    500
+#define MOUSEKEY_WHEEL_DELTA    1
+#define MOUSEKEY_WHEEL_MAX_SPEED 1
+#define MOUSEKEY_WHEEL_TIME_TO_MAX 100
+
+/* USB Device descriptor parameter */
+
+#define VENDOR_ID       0xFEED
+#define PRODUCT_ID      0x6060
+#define DEVICE_VER      0x0001
+#define MANUFACTURER    Technomancy
+#define PRODUCT         Atreus
+#define DESCRIPTION     q.m.k. keyboard firmware for Atreus
+
+/* key matrix size */
+#define MATRIX_ROWS 4
+#define MATRIX_COLS 11
+
+// Change this to how you wired your keyboard
+// COLS: Left to right, ROWS: Top to bottom
+#if defined(ATREUS_ASTAR)
+#   define MATRIX_ROW_PINS { D0, D1, D3, D2 }
+#if defined(PCBDOWN)
+#   define MATRIX_COL_PINS { B7, D6, F7, F6, B6, D4, E6, B4, B5, C6, D7 }
+#else
+#   define MATRIX_COL_PINS { D7, C6, B5, B4, E6, D4, B6, F6, F7, D6, B7 }
+#endif
+#   define UNUSED_PINS
+#elif defined(ATREUS_TEENSY2)
+#   define MATRIX_ROW_PINS { D0, D1, D2, D3 }
+#   define MATRIX_COL_PINS { F6, F5, F4, B7, B6, B5, B4, B3, B2, B1, B0 }
+#   define UNUSED_PINS
+#endif
+
+/* COL2ROW or ROW2COL */
+#define DIODE_DIRECTION COL2ROW
+
+/* define if matrix has ghost */
+//#define MATRIX_HAS_GHOST
+
+/* number of backlight levels */
+//#define BACKLIGHT_LEVELS 3
+
+/* Set 0 if debouncing isn't needed */
+#define DEBOUNCING_DELAY 5
+
+/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
+#define LOCKING_SUPPORT_ENABLE
+/* Locking resynchronize hack */
+#define LOCKING_RESYNC_ENABLE
+
+/* key combination for command */
+#define IS_COMMAND() ( \
+    keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
+)
+
+/*
+ * Feature disable options
+ *  These options are also useful to firmware size reduction.
+ */
+
+/* disable debug print */
+//#define NO_DEBUG
+
+/* disable print */
+//#define NO_PRINT
+
+/* disable action features */
+//#define NO_ACTION_LAYER
+//#define NO_ACTION_TAPPING
+//#define NO_ACTION_ONESHOT
+//#define NO_ACTION_MACRO
+//#define NO_ACTION_FUNCTION
+
+#endif
--- a/keyboards/atreus/keymaps/dvorak_42_key/keymap.c
+++ b/keyboards/atreus/keymaps/dvorak_42_key/keymap.c
@@ -0,0 +1,93 @@
+
+#include "atreus.h"
+
+// layers
+#define BASE      0
+#define KEYNAV    1
+#define KEYSEL    2
+#define MOUSE     3
+#define COMBINED  4
+
+// macros
+#define MOUSE_TOGGLE 1
+#define MOUSE_LOCK 2
+
+static bool mouse_lock = false;
+
+// building instructions:
+// make atreus-dvorak_42_key
+
+// flashing instructions:
+// avrdude -p atmega32u4 -c avr109 -U flash:w:atreus_dvorak_42_key.hex  -P COM7
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+	
+[BASE] = { 
+  {KC_QUOTE,      KC_COMMA,      KC_DOT,    KC_P,       KC_Y,         KC_TRNS,    KC_F,  KC_G,  KC_C,   KC_R,   KC_L, },
+  {KC_A,          KC_O,          KC_E,      KC_U,       KC_I,         KC_TRNS,    KC_D,  KC_H,  KC_T,   KC_N,   KC_S, },
+  {KC_SCOLON,     KC_Q,          KC_J,      KC_K,       KC_X,         MO(KEYNAV), KC_B,  KC_M,  KC_W,   KC_V,   KC_Z, },
+  {OSM(MOD_LSFT), OSM(MOD_LCTL), M(MOUSE_TOGGLE), MO(KEYSEL), MO(COMBINED), KC_ENTER,   KC_SPACE,  KC_BSPC, RCTL(KC_BSPC), KC_CAPSLOCK, OSM(MOD_LSFT), }
+},	
+
+[KEYNAV] = { 
+  {KC_ESC,    MEH(KC_A), RCTL(KC_Z),   RCTL(KC_S), MEH(KC_B), KC_TRNS,    KC_TRNS,       KC_HOME,    KC_UP,           KC_END,     KC_PGUP, },
+  {MEH(KC_C), MEH(KC_D), RSFT(KC_TAB), KC_TAB,     MEH(KC_E), KC_TRNS,    LCTL(KC_LEFT), KC_LEFT,    KC_DOWN,         KC_RIGHT,   LCTL(KC_RIGHT), },
+  {MEH(KC_F), MEH(KC_G), MEH(KC_H),    MEH(KC_I),  MEH(KC_J), KC_TRNS,    KC_TRNS,       RCTL(KC_C), RCTL(KC_X),      RCTL(KC_V), KC_PGDOWN, },
+  {KC_TRNS, KC_TRNS,   KC_TRNS,      KC_TRNS,    KC_TRNS,   KC_ENTER,   KC_SPACE,      KC_BSPC,   RCTL(KC_BSPC),    KC_DELETE,  LCTL(KC_DELETE), }
+},	
+
+[KEYSEL] = { 
+  {KC_TRNS, KC_TRNS, RCTL(KC_Z),   RCTL(KC_S), KC_TRNS, KC_TRNS,    KC_TRNS,             RSFT(KC_HOME), RSFT(KC_UP),  RSFT(KC_END), RSFT(KC_PGUP), },
+  {KC_TRNS, KC_TRNS, RSFT(KC_TAB), KC_TAB,     KC_TRNS, KC_TRNS,    RSFT(RCTL(KC_LEFT)), RSFT(KC_LEFT), RSFT(KC_DOWN), RSFT(KC_RIGHT), RSFT(RCTL(KC_RIGHT)), },
+  {KC_TRNS, KC_TRNS, KC_TRNS,      KC_TRNS,    KC_TRNS, KC_TRNS,    KC_TRNS,             RCTL(KC_C),RCTL(KC_X),     RCTL(KC_V), RSFT(KC_PGDN), },
+  {RESET,   KC_TRNS, KC_TRNS,      KC_TRNS,    KC_TRNS, KC_ENTER,   KC_SPACE,            KC_BSPC,   RCTL(KC_BSPC),  KC_DELETE,  LCTL(KC_DELETE), }
+},	
+
+[COMBINED] = { 
+  {KC_ESC,  KC_LABK, KC_RABK,     KC_DQUO,     KC_GRAVE, KC_TRNS,    KC_PLUS,     KC_7,    KC_8,    KC_9,    KC_ASTR, },
+  {KC_LPRN, KC_RPRN, KC_LBRACKET, KC_RBRACKET, KC_UNDS,  KC_TRNS,    KC_MINS,     KC_4,    KC_5,    KC_6,    KC_SLSH, },
+  {KC_LCBR, KC_RCBR, KC_BSLS,     KC_PIPE,     KC_TILD,  KC_TRNS,    KC_EQUAL,    KC_1,    KC_2,    KC_3,    KC_QUES, },
+  {KC_TRNS, KC_TRNS, KC_TRNS,     KC_TRNS,     KC_TRNS,  KC_TRNS,    KC_TRNS,     KC_0,  KC_DOT,  KC_TRNS, KC_TRNS, }
+},	
+
+[MOUSE] = { 
+  {KC_TRNS,      KC_PGUP, KC_MS_WH_UP,   KC_UP,        KC_TRNS, KC_TRNS, KC_UP,     KC_HOME,   KC_MS_U,   KC_END,  KC_MS_WH_UP,  },
+  {KC_MS_ACCEL0, KC_PGDN, KC_MS_WH_DOWN, KC_DOWN,      KC_TRNS, KC_TRNS, KC_DOWN,   KC_MS_L,   KC_MS_D,   KC_MS_R, KC_MS_WH_DOWN, },
+  {KC_TRNS,      KC_TRNS, KC_TRNS,       KC_TRNS,      KC_TRNS, KC_BTN3, MEH(KC_X), MEH(KC_Y), MEH(KC_Z), KC_F5,   RCTL(KC_W), },
+  {KC_TRNS, M(MOUSE_LOCK), KC_TRNS, KC_MS_ACCEL0, KC_TRNS, KC_BTN1, KC_BTN2, RSFT(RCTL(KC_TAB)), RCTL(KC_TAB), RCTL(KC_T), LALT(KC_LEFT), }
+},	
+
+
+};
+
+const uint16_t PROGMEM fn_actions[] = {
+
+};
+
+const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt)
+{
+  // MACRODOWN only works in this function
+      switch(id) {
+		case MOUSE_TOGGLE:
+            if (record->event.pressed) {
+				layer_on(MOUSE);
+            } else {
+				if(!mouse_lock)
+					layer_off(MOUSE);
+			}
+			break;
+		case MOUSE_LOCK:
+			if (record->event.pressed)
+			{
+				if(mouse_lock)
+				{
+					mouse_lock = false;
+					layer_off(MOUSE);
+				}
+				else
+					mouse_lock = true;
+			}
+			break;		  
+      }
+    return MACRO_NONE;
+};
--- a/keyboards/ergodox_ez/keymaps/dvorak_42_key/README.md
+++ b/keyboards/ergodox_ez/keymaps/dvorak_42_key/README.md
@@ -0,0 +1,17 @@
+Overview
+========
+
+This is a dvorak based layout for the Ergodox EZ. Its basic key layout is similar to the Atreus "dvorak_42_key" layout. In fact this layout was created for seamless switching between the Ergodox EZ and Atreus. On the base layer, the keys that don't exist on the Atreus are mapped to MEH shortcuts and can be interpreted by Autohotkey. This layout only makes use of the 42 keys that the Atreus also has for the main functionality. 
+
+How to build 
+------------
+make ergodox_ez-dvorak_42_key-teensy
+
+Layers
+------
+* BASE: basic dvorak layout
+* KEYNAV: arrow-key navigation. Momentary toggle held by thumb allows the right hand to navigate through text as well as copy/paste/cut, page up/page down
+* KEYSEL: similar to KEYNAV, except for shift-selection
+* COMBINED: this is a layer that combines numbers, brackets and special characters. !@#$%^&*( can be type by shift+COMBINED+1/2/3/etc..
+* MOUSE: mouse navigation, as well as browser tab-left/tab-right shortcuts
+* SHELL_NAV: Linux Bash shortcuts (move forward/backward in command line, move between screen windows, Ctrl+C, recall last argument, etc
--- a/keyboards/ergodox_ez/keymaps/dvorak_42_key/keymap.c
+++ b/keyboards/ergodox_ez/keymaps/dvorak_42_key/keymap.c
@@ -0,0 +1,321 @@
+#include QMK_KEYBOARD_H
+#include "debug.h"
+#include "action_layer.h"
+#include "version.h"
+
+
+// to build this keymap
+// make ergodox_ez-dvorak_42_key-teensy
+
+static bool mouse_lock = false;
+
+enum custom_keycodes {
+  PLACEHOLDER = SAFE_RANGE, // can always be here
+  EPRM,
+  VRSN,
+  RGB_SLD,
+  
+};
+
+
+#define BASE      0 // base dvorak layer
+#define KEYNAV    1 // arrow navigation (right hand)
+#define KEYSEL    2 // arrow navigation + shift (allow text selection)
+#define SHELL_NAV 3 // bash shortcuts
+#define MOUSE     4 // mouse layer (can be locked with lock key)
+#define COMBINED  5 // combined numbers and symbols layer
+
+// macros
+#define MOUSE_TOGGLE 1
+#define MOUSE_LOCK 2
+#define SCREEN_TAB_LEFT 4
+#define SCREEN_TAB_RIGHT 5
+#define SCREEN_NEW_TAB 6
+#define SWITCH_NDS 7
+#define SCREEN_COPY_MODE 8
+#define SCREEN_PASTE 9
+#define SHELL_RECALL_LAST_ARG_REMOVE_FIRST_COMMAND 15
+
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+
+  [BASE] = KEYMAP(
+	  // left hand
+	  KC_ESC,         KC_F1,         KC_F2,      KC_F3,        KC_F4,   KC_F5,   KC_F6,
+	  KC_TAB,         KC_QUOTE,      KC_COMMA,   KC_DOT,       KC_P,    KC_Y,    MEH(KC_2),
+	  MO(SHELL_NAV),  KC_A,          KC_O,       KC_E,         KC_U,    KC_I,
+	  MEH(KC_0),      KC_SCOLON,     KC_Q,       KC_J,         KC_K,    KC_X,    MEH(KC_3),
+	  MEH(KC_1),      OSM(MOD_LSFT), OSM(MOD_LCTL), M(MOUSE_TOGGLE), MO(KEYSEL),
+	  
+	  // left thumb cluster
+	            MEH(KC_4),      MEH(KC_5),
+	                            MEH(KC_6),
+	  MO(COMBINED),MO(KEYNAV),  OSM(MOD_LALT),
+	  
+	  // right hand
+	  KC_F7,     KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, MEH(KC_9),
+	  MEH(KC_7), KC_F,  KC_G,  KC_C,   KC_R,   KC_L,   MEH(KC_F1),
+			     KC_D,  KC_H,  KC_T,   KC_N,   KC_S,   MEH(KC_F2),
+	  MEH(KC_8), KC_B,  KC_M,  KC_W,   KC_V,   KC_Z,   MEH(KC_F3),
+	  KC_BSPC,   RCTL(KC_BSPC), KC_CAPSLOCK, OSM(MOD_LSFT),MEH(KC_F4),
+    
+	  // right thumb cluster
+	  MEH(KC_F5),MEH(KC_F6),MEH(KC_F7),MEH(KC_F8),KC_ENTER,KC_SPACE
+  
+  ),
+  
+  [KEYNAV] = KEYMAP(
+	// left hand
+	KC_TRNS,KC_TRNS,     KC_TRNS,     KC_TRNS,      KC_TRNS,    KC_TRNS,     KC_TRNS,
+	KC_TRNS,KC_ESC,      MEH(KC_F9),  RCTL(KC_Z),   RCTL(KC_S), MEH(KC_F10), KC_TRNS,
+	KC_TRNS,MEH(KC_F11), MEH(KC_F12), RSFT(KC_TAB), KC_TAB,     MEH(KC_A),
+	KC_TRNS,MEH(KC_B),   MEH(KC_C),   MEH(KC_D),    MEH(KC_E),  MEH(KC_F),   KC_TRNS,
+	KC_TRNS,KC_TRNS,     KC_TRNS,     KC_TRNS,      KC_TRNS,
+	// left thumb cluster
+	KC_TRNS,KC_TRNS,KC_TRNS,TO(MOUSE),KC_TRNS,KC_TRNS,
+	
+	// right hand
+	KC_TRNS,KC_TRNS,       KC_TRNS,    KC_TRNS,         KC_TRNS,    KC_TRNS,         MEH(KC_G),
+	KC_TRNS,KC_NO,         KC_HOME,    KC_UP,           KC_END,     KC_PGUP,         MEH(KC_H),
+	        LCTL(KC_LEFT), KC_LEFT,    KC_DOWN,         KC_RIGHT,   LCTL(KC_RIGHT),  MEH(KC_I),
+	KC_TRNS,KC_NO,         RCTL(KC_C), RCTL(KC_X),      RCTL(KC_V), KC_PGDOWN,       MEH(KC_J),
+	                       KC_BSPC,   RCTL(KC_BSPC),    KC_DELETE,  LCTL(KC_DELETE), MEH(KC_K),
+	
+	// right thumb cluster
+	KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS
+  ),  
+  
+	// key selection layer
+	[KEYSEL] = KEYMAP(
+		   // left hand
+		   KC_TRNS,KC_TRNS,   KC_TRNS,  KC_TRNS,   KC_TRNS,   KC_TRNS,   KC_TRNS,
+		   KC_TRNS,MEH(KC_G), MEH(KC_H),MEH(KC_I), MEH(KC_J), MEH(KC_K), KC_TRNS,
+		   KC_TRNS,MEH(KC_L), MEH(KC_M),MEH(KC_N), MEH(KC_O), MEH(KC_P),
+		   KC_TRNS,MEH(KC_Q), MEH(KC_R),MEH(KC_S), MEH(KC_T), MEH(KC_U), KC_TRNS,
+				   // bottom row
+				   KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,
+										   // thumb cluster
+										   KC_TRNS,KC_TRNS,
+												   KC_TRNS,
+								   KC_TRNS,KC_TRNS,KC_TRNS,
+		   // right hand
+		   KC_TRNS,       KC_TRNS,             KC_TRNS,       KC_TRNS,       KC_TRNS,        KC_TRNS,              MEH(KC_Q),
+		   RSFT(KC_PGUP), KC_TRNS,             RSFT(KC_HOME), RSFT(KC_UP),   RSFT(KC_END),   RSFT(KC_PGUP),        MEH(KC_R),
+						  RSFT(RCTL(KC_LEFT)), RSFT(KC_LEFT), RSFT(KC_DOWN), RSFT(KC_RIGHT), RSFT(RCTL(KC_RIGHT)), MEH(KC_S),
+		   RSFT(KC_PGDN), KC_TRNS,             RCTL(KC_C),    RCTL(KC_X),    RCTL(KC_V),     RSFT(KC_PGDN),        MEH(KC_T),
+					// bottom row
+					KC_BSPC,   RCTL(KC_BSPC),    KC_DELETE,  LCTL(KC_DELETE),                                      MEH(KC_U),
+		   // thumb cluster
+		   KC_TRNS, KC_TRNS,
+		   KC_TRNS,
+		   KC_TRNS, KC_TRNS, KC_TRNS
+	),  
+  
+  // shell navigation layer
+  [SHELL_NAV] = KEYMAP(
+       // left hand
+       KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,
+       KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,
+       KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,
+       KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,
+               // bottom row
+               KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,
+                                       // thumb cluster
+                                       KC_TRNS,KC_TRNS,
+                                               LALT(KC_D),
+                               KC_TRNS,RCTL(KC_W),KC_TRNS,
+       // right hand
+       KC_TRNS,    KC_TRNS,        KC_TRNS,             KC_TRNS,         KC_TRNS,         KC_TRNS,        M(SWITCH_NDS),
+       RCTL(KC_L), RCTL(KC_W),     KC_HOME,             KC_UP,           KC_END,          LALT(KC_D),     RCTL(KC_R),
+                   LALT(KC_B),     KC_LEFT,             KC_DOWN,         KC_RIGHT,        LALT(KC_F),     LALT(KC_DOT),
+       RCTL(KC_C), RCTL(KC_U),     M(SCREEN_COPY_MODE), M(SCREEN_PASTE), MEH(KC_V),      RCTL(KC_K),     M(SHELL_RECALL_LAST_ARG_REMOVE_FIRST_COMMAND),
+                // bottom row
+                 M(SCREEN_TAB_LEFT), M(SCREEN_TAB_RIGHT), M(SCREEN_NEW_TAB),  KC_TRNS,    KC_TRNS,
+       // thumb cluster
+       KC_TRNS, KC_TRNS,
+       KC_TRNS,
+       KC_TRNS, KC_TRNS, KC_TRNS
+  ),
+  
+
+  
+  [COMBINED] = KEYMAP(
+  
+	// left hand
+	KC_NO,  KC_TRNS, KC_TRNS,    KC_TRNS,     KC_TRNS,     KC_TRNS,KC_TRNS,
+	KC_TRNS,KC_ESC,  KC_LABK,    KC_RABK,     KC_DQUO,     KC_GRAVE,KC_TRNS,
+	KC_TRNS,KC_LPRN, KC_RPRN,    KC_LBRACKET, KC_RBRACKET, KC_UNDS,
+	KC_TRNS,KC_LCBR, KC_RCBR,    KC_BSLS,     KC_PIPE,     KC_TILD,KC_TRNS,
+	// bottom row
+	KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,
+	// thumb cluster
+	KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,
+	
+	// right hand
+	KC_TRNS, KC_TRNS,     KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,     MEH(KC_L),
+	KC_TRNS, KC_PLUS,     KC_7,    KC_8,    KC_9,    KC_ASTR,     MEH(KC_M),
+	         KC_MINS,     KC_4,    KC_5,    KC_6,    KC_SLSH,     MEH(KC_N),
+	KC_TRNS, KC_EQUAL,    KC_1,    KC_2,    KC_3,    KC_QUES,     MEH(KC_O),
+	// bottom row 
+	                      KC_0,  KC_DOT,  KC_TRNS, KC_TRNS,     MEH(KC_P),
+	// thumb cluster
+	KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS),
+  
+  
+	[MOUSE] = KEYMAP(
+		   KC_TRNS, KC_TRNS,      KC_TRNS,       KC_TRNS,       KC_TRNS,      KC_TRNS, KC_TRNS,
+		   KC_TRNS, KC_TRNS,      KC_PGUP,       KC_MS_WH_UP,   KC_UP,        KC_TRNS, KC_TRNS,
+		   KC_TRNS, KC_MS_ACCEL0, KC_PGDN,       KC_MS_WH_DOWN, KC_DOWN,      KC_TRNS,
+		   KC_TRNS, KC_TRNS,      KC_TRNS,       KC_TRNS,       KC_TRNS,      KC_TRNS, KC_TRNS,
+		   KC_TRNS, KC_TRNS,      M(MOUSE_LOCK), KC_TRNS,       KC_MS_ACCEL0,
+		   
+											   KC_TRNS, KC_TRNS,
+														KC_TRNS,
+									  KC_TRNS, KC_BTN3, KC_TRNS,
+		// right hand
+		   KC_TRNS,  KC_TRNS,   KC_TRNS,      KC_TRNS,      KC_TRNS,      KC_TRNS,       KC_TRNS,
+		   KC_TRNS,  KC_UP,     KC_HOME,      KC_MS_U,      KC_END,       KC_MS_WH_UP,   KC_TRNS,
+					 KC_DOWN,   KC_MS_L,      KC_MS_D,      KC_MS_R,      KC_MS_WH_DOWN, KC_TRNS,
+		   KC_TRNS,  MEH(KC_X), MEH(KC_Y),    MEH(KC_Z),    KC_F5,        RCTL(KC_W),    KC_TRNS,
+									// browser tab control
+							        RSFT(RCTL(KC_TAB)), RCTL(KC_TAB), RCTL(KC_T), LALT(KC_LEFT), KC_TRNS,
+		   KC_TRNS, KC_TRNS,
+		   KC_TRNS,
+		   KC_TRNS, KC_BTN1, KC_BTN2
+	),  
+	
+
+};
+
+const uint16_t PROGMEM fn_actions[] = {
+  [1] = ACTION_LAYER_TAP_TOGGLE(1)
+};
+
+// leaving this in place for compatibilty with old keymaps cloned and re-compiled.
+const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt)
+{
+      switch(id) {
+		case MOUSE_TOGGLE:
+            if (record->event.pressed) {
+				layer_on(MOUSE);
+            } else {
+				if(!mouse_lock)
+					layer_off(MOUSE);
+			}
+			break;
+		case MOUSE_LOCK:
+			if (record->event.pressed)
+			{
+				if(mouse_lock)
+				{
+					mouse_lock = false;
+					layer_off(MOUSE);
+				}
+				else
+					mouse_lock = true;
+			}
+			break;
+        case SCREEN_TAB_LEFT:
+            if (record->event.pressed) {
+                return MACRO( D(LCTL), T(A), U(LCTL), T(P), END);
+            }        
+            break;
+        case SCREEN_TAB_RIGHT:
+             if (record->event.pressed) {
+                return MACRO( D(LCTL), T(A), U(LCTL), T(N), END);
+            }                    
+            break;
+        case SCREEN_NEW_TAB:
+             if (record->event.pressed) {
+                return MACRO( D(LCTL), T(A), U(LCTL), T(C), END);
+            }                                
+        break;
+        case SCREEN_COPY_MODE:
+            if (record->event.pressed) {
+                return MACRO( D(LCTL), T(A), U(LCTL), T(ESC), END);
+            }
+        break;
+        case SCREEN_PASTE:
+            if (record->event.pressed) {
+                return MACRO( D(LCTL), T(A), U(LCTL), T(RBRC), END); 
+            }
+        break;        
+        case SWITCH_NDS:
+            if (record->event.pressed) {
+                return MACRO( D(LSFT), 
+							  T(F11), 
+							  U(LSFT), 
+							  W(255), 
+							  D(LALT), 
+							  T(TAB), 
+							  U(LALT), 
+							  END); 
+            }                                
+        break;        
+        case SHELL_RECALL_LAST_ARG_REMOVE_FIRST_COMMAND:
+            if (record->event.pressed) {
+                return MACRO( T(UP), T(HOME), D(LALT), T(D), U(LALT), END);
+            }
+        break;                                
+      }
+    return MACRO_NONE;
+};
+
+bool process_record_user(uint16_t keycode, keyrecord_t *record) {
+  switch (keycode) {
+    // dynamically generate these.
+    case EPRM:
+      if (record->event.pressed) {
+        eeconfig_init();
+      }
+      return false;
+      break;
+    case VRSN:
+      if (record->event.pressed) {
+        SEND_STRING (QMK_KEYBOARD "/" QMK_KEYMAP " @ " QMK_VERSION);
+      }
+      return false;
+      break;
+    case RGB_SLD:
+      if (record->event.pressed) {
+        rgblight_mode(1);
+      }
+      return false;
+      break;
+    
+  }
+  return true;
+}
+
+void led_set_user(uint8_t usb_led) {
+    if (usb_led & (1<<USB_LED_CAPS_LOCK)) {
+        ergodox_right_led_1_on();
+    } else {
+        ergodox_right_led_1_off();
+    }
+}
+
+void matrix_scan_user(void) {
+
+    uint8_t layer = biton32(layer_state);
+
+    ergodox_board_led_off();
+    ergodox_right_led_2_off();
+    ergodox_right_led_3_off();
+    switch (layer) {
+		case COMBINED:
+		    ergodox_right_led_2_on();		
+			break;
+	    case KEYNAV:
+		case KEYSEL:
+		    ergodox_right_led_3_on();
+			break;
+        case MOUSE:
+            ergodox_right_led_2_on();
+            ergodox_right_led_3_on();
+            break;
+        default:
+            break;
+    }
+
+};
--- a/keyboards/ergodox_infinity/readme.md
+++ b/keyboards/ergodox_infinity/readme.md
@@ -3,6 +3,8 @@
 The Infinity is two completely independent keyboards, and needs to be flashed
 for the left and right halves seperately.  To flash them:

+  - Make sure you are in the top-level qmk_firmware directory
+
  - Build the firmware with `make ergodox_infinity-keymapname`

  - Plug in the left hand keyboard only.
@@ -42,4 +44,5 @@ You have a few options in how you flash the firmware:

 - For minor changes such as changing only the keymap without having updated
  any part of the firmware code itself, you can program only the MASTER half.
-  It is safest to program both halves though.
+
+- It is safest to program both halves though.
--- a/keyboards/mechmini/keymaps/default/keymap.c
+++ b/keyboards/mechmini/keymaps/default/keymap.c
@@ -14,15 +14,48 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 */

 #include "mechmini.h"
+#define _BL 0
+#define _FN1 1
+#define _FN2 2
+#define _FN3 3
+#define _____ KC_TRNS

 const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
-    KEYMAP(
-        TAB,  Q,    W,    E,    R,    T,    Y,    U,   I,    O,    P,    BSLS,
-        LCTL, A,    S,    D,    F,    G,    H,    J,   K,    L,    SCLN,
-        LSFT, Z,    X,    C,    V,    B,    N,    M,   COMM, DOT,  SLSH,
-        GRV,  LALT, LGUI,       SPC,        ENT,       RGUI, RALT, RCTL
-    )
+   [_BL] = KEYMAP(
+     KC_ESC,     KC_Q,       KC_W,       KC_E,     KC_R,     KC_T,     KC_Y,     KC_U,     KC_I,     KC_O,     KC_P,     KC_BSPC,
+     KC_TAB,     KC_A,       KC_S,       KC_D,     KC_F,     KC_G,     KC_H,     KC_J,     KC_K,     KC_L,     KC_ENT,
+     KC_LSFT,    KC_Z,       KC_X,       KC_C,     KC_V,     KC_B,     KC_N,     KC_M,     KC_COMM,  KC_DOT,   MO(_FN2),
+     KC_LCTL,    KC_LGUI,    KC_LALT,         _____,         KC_SPC,        _____,                   MO(_FN1), MO(_FN3)
+   ),
+   [_FN1] = KEYMAP(
+     _____,      _____,      KC_UP,      KC_MUTE,  KC_VOLD,  KC_VOLU,  KC_MRWD,  KC_MPLY,  KC_MFFD,  KC_SLCK,  KC_PAUS,  KC_DEL,
+     KC_CAPS,    KC_LEFT,    KC_DOWN,    KC_RIGHT, _____,    _____,    _____,    KC_INS,   KC_HOME,  KC_PGUP,  KC_PSCR,
+     _____,      _____,      _____,      _____,    _____,    _____,    _____,    KC_END,   KC_PGDN,  _____,    _____,
+     _____,      _____,      _____,            _____,        _____,         _____,                   _____,    _____
+   ),
+   [_FN2] = KEYMAP(
+     KC_GRAVE,   KC_1,       KC_2,       KC_3,     KC_4,     KC_5,     KC_6,     KC_7,     KC_8,     KC_9,     KC_0,     KC_DEL,
+     KC_CAPS,    _____,      _____,      _____,    _____,    KC_LBRC,  KC_RBRC,  KC_BSLS,  KC_MINS,  KC_EQL,   _____,
+     _____,      _____,      _____,      _____,    _____,    _____,    _____,    KC_SCLN,  KC_QUOT,  KC_SLSH,  _____,
+     _____,      _____,      _____,            _____,        _____,         _____,                   _____,    _____
+   ),
+   [_FN3] = KEYMAP(
+     KC_F1,      KC_F2,      KC_F3,      KC_F4,    KC_F5,    KC_F6,    KC_F7,    KC_F8,    KC_F9,    KC_F10,   KC_F11,   KC_F12,
+     _____,      _____,      _____,      _____,    _____,    _____,    _____,    _____,    _____,    _____,    _____,
+     _____,      _____,      _____,      _____,    _____,    _____,    _____,    _____,    _____,    _____,    _____,
+     _____,      _____,      _____,            _____,        _____,         _____,                   _____,    _____
+   )
 };

+/**
+ * Blank keymap
+ [0] = KEYMAP(
+   _____,      _____,      _____,      _____,    _____,    _____,    _____,    _____,    _____,    _____,    _____,    _____
+   _____,      _____,      _____,      _____,    _____,    _____,    _____,    _____,    _____,    _____,    _____,
+   _____,      _____,      _____,      _____,    _____,    _____,    _____,    _____,    _____,    _____,    _____,
+   _____,      _____,      _____,            _____,        _____,         _____,                   _____,    _____
+ )
+ */
+
 const uint16_t PROGMEM fn_actions[] = {
 };
--- a/keyboards/mechmini/mechmini.h
+++ b/keyboards/mechmini/mechmini.h
@@ -20,18 +20,19 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.

 #include "keycode.h"
 #include "action.h"
+#include "quantum.h"

 #define KEYMAP( \
    K03, K13, K23, K33, K43, K53, K26, KC6, KC7, K27, KA3, KB3, \
    K02, K12, K22, K32, K42, K52, K36, KD6, KD7, K37, KA2, \
    K01, K11, K21, K31, K41, K51, K46, KE6, KE7, K47, KA1, \
-    K00, K10, K20,      K56,      K57,      KB0, KC0, K66  \
+    K00, K10, K20,      K56, K57, KB0,           KC0, K66  \
 ) \
 { \
-    { KC_##K00, KC_##K10, KC_##K20, KC_##K56, KC_NO,    KC_NO,    KC_##K57, KC_NO,    KC_##KB0, KC_##KC0, KC_##K66, KC_NO,    KC_NO,    KC_NO,    KC_NO }, \
-    { KC_##K01, KC_##K11, KC_##K21, KC_##K31, KC_##K41, KC_##K51, KC_##K46, KC_##KE6, KC_##KE7, KC_##K47, KC_##KA1, KC_NO,    KC_NO,    KC_NO,    KC_NO }, \
-    { KC_##K02, KC_##K12, KC_##K22, KC_##K32, KC_##K42, KC_##K52, KC_##K36, KC_##KD6, KC_##KD7, KC_##K37, KC_##KA2, KC_NO,    KC_NO,    KC_NO,    KC_NO }, \
-    { KC_##K03, KC_##K13, KC_##K23, KC_##K33, KC_##K43, KC_##K53, KC_##K26, KC_##KC6, KC_##KC7, KC_##K27, KC_##KA3, KC_##KB3, KC_NO,    KC_NO,    KC_NO }, \
+    { K00, K10, K20, K56, KC_NO,    K57,    KC_NO, KC_NO,    KB0, KC0, K66, KC_NO,    KC_NO,    KC_NO,    KC_NO }, \
+    { K01, K11, K21, K31, K41, K51, K46, KE6, KE7, K47, KA1, KC_NO,    KC_NO,    KC_NO,    KC_NO }, \
+    { K02, K12, K22, K32, K42, K52, K36, KD6, KD7, K37, KA2, KC_NO,    KC_NO,    KC_NO,    KC_NO }, \
+    { K03, K13, K23, K33, K43, K53, K26, KC6, KC7, K27, KA3, KB3, KC_NO,    KC_NO,    KC_NO }, \
    { KC_NO,    KC_NO,    KC_NO,    KC_NO,    KC_NO,    KC_NO,    KC_NO,    KC_NO,    KC_NO,    KC_NO,    KC_NO,    KC_NO,    KC_NO,    KC_NO,    KC_NO }, \
    { KC_NO,    KC_NO,    KC_NO,    KC_NO,    KC_NO,    KC_NO,    KC_NO,    KC_NO,    KC_NO,    KC_NO,    KC_NO,    KC_NO,    KC_NO,    KC_NO,    KC_NO }, \
    { KC_NO,    KC_NO,    KC_NO,    KC_NO,    KC_NO,    KC_NO,    KC_NO,    KC_NO,    KC_NO,    KC_NO,    KC_NO,    KC_NO,    KC_NO,    KC_NO,    KC_NO }, \
--- a/keyboards/mechmini/usbconfig.h
+++ b/keyboards/mechmini/usbconfig.h
@@ -118,7 +118,7 @@ section at the end of this file).
 /* Define this to 1 if the device has its own power supply. Set it to 0 if the
 * device is powered from the USB bus.
 */
-#define USB_CFG_MAX_BUS_POWER           500
+#define USB_CFG_MAX_BUS_POWER           100
 /* Set this variable to the maximum USB bus power consumption of your device.
 * The value is in milliamperes. [It will be divided by two since USB
 * communicates power requirements in units of 2 mA.]
--- a/keyboards/ps2avrGB/config.h
+++ b/keyboards/ps2avrGB/config.h
@@ -29,6 +29,9 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define MATRIX_ROWS 8
 #define MATRIX_COLS 15

+#define RGBLED_NUM 16
+#define RGBLIGHT_ANIMATIONS
+
 #define NO_UART 1
 #define BOOTLOADHID_BOOTLOADER 1

--- a/keyboards/ps2avrGB/i2c.c
+++ b/keyboards/ps2avrGB/i2c.c
@@ -0,0 +1,104 @@
+/*
+Copyright 2016 Luiz Ribeiro <luizribeiro@gmail.com>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#include <avr/io.h>
+#include <util/twi.h>
+
+#include "i2c.h"
+
+void i2c_set_bitrate(uint16_t bitrate_khz) {
+    uint8_t bitrate_div = ((F_CPU / 1000l) / bitrate_khz);
+    if (bitrate_div >= 16) {
+        bitrate_div = (bitrate_div - 16) / 2;
+    }
+    TWBR = bitrate_div;
+}
+
+void i2c_init(void) {
+    // set pull-up resistors on I2C bus pins
+    PORTC |= 0b11;
+
+    i2c_set_bitrate(400);
+
+    // enable TWI (two-wire interface)
+    TWCR |= (1 << TWEN);
+
+    // enable TWI interrupt and slave address ACK
+    TWCR |= (1 << TWIE);
+    TWCR |= (1 << TWEA);
+}
+
+uint8_t i2c_start(uint8_t address) {
+    // reset TWI control register
+    TWCR = 0;
+
+    // begin transmission and wait for it to end
+    TWCR = (1<<TWINT) | (1<<TWSTA) | (1<<TWEN);
+    while (!(TWCR & (1<<TWINT)));
+
+    // check if the start condition was successfully transmitted
+    if ((TWSR & 0xF8) != TW_START) {
+        return 1;
+    }
+
+    // transmit address and wait
+    TWDR = address;
+    TWCR = (1<<TWINT) | (1<<TWEN);
+    while (!(TWCR & (1<<TWINT)));
+
+    // check if the device has acknowledged the READ / WRITE mode
+    uint8_t twst = TW_STATUS & 0xF8;
+    if ((twst != TW_MT_SLA_ACK) && (twst != TW_MR_SLA_ACK)) {
+        return 1;
+    }
+
+    return 0;
+}
+
+void i2c_stop(void) {
+    TWCR = (1<<TWINT) | (1<<TWEN) | (1<<TWSTO);
+}
+
+uint8_t i2c_write(uint8_t data) {
+    TWDR = data;
+
+    // transmit data and wait
+    TWCR = (1<<TWINT) | (1<<TWEN);
+    while (!(TWCR & (1<<TWINT)));
+
+    if ((TWSR & 0xF8) != TW_MT_DATA_ACK) {
+        return 1;
+    }
+
+    return 0;
+}
+
+uint8_t i2c_send(uint8_t address, uint8_t *data, uint16_t length) {
+    if (i2c_start(address)) {
+        return 1;
+    }
+
+    for (uint16_t i = 0; i < length; i++) {
+        if (i2c_write(data[i])) {
+            return 1;
+        }
+    }
+
+    i2c_stop();
+
+    return 0;
+}
--- a/keyboards/ps2avrGB/i2c.h
+++ b/keyboards/ps2avrGB/i2c.h
@@ -0,0 +1,25 @@
+/*
+Copyright 2016 Luiz Ribeiro <luizribeiro@gmail.com>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#ifndef __I2C_H__
+#define __I2C_H__
+
+void i2c_init(void);
+void i2c_set_bitrate(uint16_t bitrate_khz);
+uint8_t i2c_send(uint8_t address, uint8_t *data, uint16_t length);
+
+#endif
--- a/keyboards/ps2avrGB/keymaps/default/keymap.c
+++ b/keyboards/ps2avrGB/keymaps/default/keymap.c
@@ -16,17 +16,28 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 */

 #include "ps2avrGB.h"
+#include "action_layer.h"
+#include "rgblight.h"

 const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
-    KC_KEYMAP(
-        ESC, F1,  F2,  F3,  F4,  F5,  F6,  F7,  F8,  F9,  F10, F11, F12, PSCR,HOME,END,
-        GRV, 1,   2,   3,   4,   5,   6,   7,   8,   9,   0,   MINS,EQL, BSPC,     DEL,
-        TAB, Q,   W,   E,   R,   T,   Y,   U,   I,   O,   P,   LBRC,RBRC,BSLS,     INS,
-        CAPS,A,   S,   D,   F,   G,   H,   J,   K,   L,   SCLN,QUOT,ENT,           PGUP,
-        LSFT,Z,   X,   C,   V,   B,   N,   M,   COMM,DOT, SLSH,RSFT,          UP,  PGDN,
-        LCTL,LALT,LGUI,          SPC,                     RGUI,RALT,RCTL,LEFT,DOWN,RGHT
-    )
+    [0] = KEYMAP(
+        KC_ESC, KC_F1,  KC_F2,  KC_F3,  KC_F4,  KC_F5,  KC_F6,  KC_F7,  KC_F8,  KC_F9,  KC_F10, KC_F11, KC_F12, KC_PSCR,KC_HOME,KC_END,
+        KC_GRV, KC_1,   KC_2,   KC_3,   KC_4,   KC_5,   KC_6,   KC_7,   KC_8,   KC_9,   KC_0,   KC_MINS,KC_EQL, KC_BSPC,        KC_DEL,
+        KC_TAB, KC_Q,   KC_W,   KC_E,   KC_R,   KC_T,   KC_Y,   KC_U,   KC_I,   KC_O,   KC_P,   KC_LBRC,KC_RBRC,KC_BSLS,        KC_INS,
+        KC_FN0, KC_A,   KC_S,   KC_D,   KC_F,   KC_G,   KC_H,   KC_J,   KC_K,   KC_L,   KC_SCLN,KC_QUOT,KC_ENT,                 KC_PGUP,
+        KC_LSFT,KC_Z,   KC_X,   KC_C,   KC_V,   KC_B,   KC_N,   KC_M,   KC_COMM,KC_DOT, KC_SLSH,KC_RSFT,                KC_UP,  KC_PGDN,
+        KC_LCTL,KC_LALT,KC_LGUI,                KC_SPC,                                 KC_RGUI,KC_RALT,KC_RCTL,KC_LEFT,KC_DOWN,KC_RGHT
+    ),
+    [1] = KEYMAP(
+        KC_TRNS,RGB_TOG,RGB_MOD,RGB_HUI,RGB_SAI,RGB_VAI,RGB_HUD,RGB_SAD,RGB_VAD,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_END,
+        KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,        KC_DEL,
+        KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,        KC_INS,
+        KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,                KC_TRNS,
+        KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,                KC_TRNS,KC_TRNS,
+        KC_TRNS,KC_TRNS,KC_TRNS,                KC_TRNS,                                KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_RGHT
+    ),
 };

 const uint16_t PROGMEM fn_actions[] = {
+  [0]  = ACTION_LAYER_MOMENTARY(1),
 };
--- a/keyboards/ps2avrGB/matrix.c
+++ b/keyboards/ps2avrGB/matrix.c
@@ -93,6 +93,8 @@ uint8_t matrix_scan(void) {
        }
    }

+    matrix_scan_user();
+
    return 1;
 }

--- a/keyboards/ps2avrGB/ps2avrGB.c
+++ b/keyboards/ps2avrGB/ps2avrGB.c
@@ -0,0 +1,45 @@
+/*
+Copyright 2017 Luiz Ribeiro <luizribeiro@gmail.com>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#include "ps2avrGB.h"
+#include "rgblight.h"
+
+#include <avr/pgmspace.h>
+
+#include "action_layer.h"
+#include "i2c.h"
+#include "quantum.h"
+
+extern rgblight_config_t rgblight_config;
+
+void rgblight_set(void) {
+    if (!rgblight_config.enable) {
+        for (uint8_t i = 0; i < RGBLED_NUM; i++) {
+            led[i].r = 0;
+            led[i].g = 0;
+            led[i].b = 0;
+        }
+    }
+
+    i2c_init();
+    i2c_send(0xb0, (uint8_t*)led, 3 * RGBLED_NUM);
+}
+
+__attribute__ ((weak))
+void matrix_scan_user(void) {
+    rgblight_task();
+}
--- a/keyboards/ps2avrGB/ps2avrGB.h
+++ b/keyboards/ps2avrGB/ps2avrGB.h
@@ -18,6 +18,7 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #ifndef KEYMAP_COMMON_H
 #define KEYMAP_COMMON_H

+#include "quantum_keycodes.h"
 #include "keycode.h"
 #include "action.h"

--- a/keyboards/ps2avrGB/rules.mk
+++ b/keyboards/ps2avrGB/rules.mk
@@ -20,7 +20,6 @@ PROTOCOL = VUSB
 # unsupported features for now
 NO_UART = yes
 NO_SUSPEND_POWER_DOWN = yes
-BACKLIGHT_ENABLE = no

 # processor frequency
 F_CPU = 12000000
@@ -31,13 +30,16 @@ MOUSEKEY_ENABLE = yes
 EXTRAKEY_ENABLE = yes
 CONSOLE_ENABLE = yes
 COMMAND_ENABLE = yes
+BACKLIGHT_ENABLE = no
+RGBLIGHT_ENABLE = yes
+RGBLIGHT_CUSTOM_DRIVER = yes

 OPT_DEFS = -DDEBUG_LEVEL=0
 OPT_DEFS += -DBOOTLOADER_SIZE=2048

 # custom matrix setup
 CUSTOM_MATRIX = yes
-SRC = matrix.c
+SRC = matrix.c i2c.c

 # programming options
 PROGRAM_CMD = ./keyboards/ps2avrGB/program $(TARGET).hex
--- a/quantum/rgblight.c
+++ b/quantum/rgblight.c
@@ -373,7 +373,7 @@ void rgblight_setrgb(uint8_t r, uint8_t g, uint8_t b) {
  rgblight_set();
 }

-__attribute__ ((weak))
+#ifndef RGBLIGHT_CUSTOM_DRIVER
 void rgblight_set(void) {
  if (rgblight_config.enable) {
    #ifdef RGBW
@@ -394,6 +394,7 @@ void rgblight_set(void) {
    #endif
  }
 }
+#endif

 #ifdef RGBLIGHT_ANIMATIONS

--- a/quantum/rgblight.h
+++ b/quantum/rgblight.h
@@ -62,7 +62,10 @@
 #include <stdint.h>
 #include <stdbool.h>
 #include "eeconfig.h"
+#ifndef RGBLIGHT_CUSTOM_DRIVER
 #include "ws2812.h"
+#endif
+#include "rgblight_types.h"

 extern LED_TYPE led[RGBLED_NUM];

--- a/quantum/rgblight_types.h
+++ b/quantum/rgblight_types.h
@@ -0,0 +1,45 @@
+/*
+ * light weight WS2812 lib include
+ *
+ * Version 2.3  - Nev 29th 2015
+ * Author: Tim (cpldcpu@gmail.com)
+ *
+ * Please do not change this file! All configuration is handled in "ws2812_config.h"
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#ifndef RGBLIGHT_TYPES
+#define RGBLIGHT_TYPES
+
+#include <avr/io.h>
+
+#ifdef RGBW
+  #define LED_TYPE struct cRGBW
+#else
+  #define LED_TYPE struct cRGB
+#endif
+
+
+/*
+ *  Structure of the LED array
+ *
+ * cRGB:     RGB  for WS2812S/B/C/D, SK6812, SK6812Mini, SK6812WWA, APA104, APA106
+ * cRGBW:    RGBW for SK6812RGBW
+ */
+
+struct cRGB  { uint8_t g; uint8_t r; uint8_t b; };
+struct cRGBW { uint8_t g; uint8_t r; uint8_t b; uint8_t w;};
+
+#endif
--- a/util/wsl_install.sh
+++ b/util/wsl_install.sh
@@ -51,7 +51,7 @@ popd
 echo 
 echo "Creating a softlink to the utils directory as ~/qmk_utils."
 echo "This is needed so that the the make system can find all utils it need."
-read -p "Press any key to continue (ctrl-c to abort)"
+read -p "Press enter to continue (ctrl-c to abort)"
 ln -sfn "$dir" ~/qmk_utils

 if grep "^source ~/qmk_utils/activate_wsl.sh$" ~/.bashrc
@@ -91,7 +91,7 @@ done
 echo
 echo "******************************************************************************"
 echo "Installation completed!"
-echo "You need to open a new batch command prompt for all the utils to work properly"
+echo "You need to open a new bash command prompt for all the utils to work properly"
 echo "******************************************************************************"

 popd > /dev/null
Author	SHA1	Message	Date
Jack Humbert	024f0455de	[core] fix rgb source include	2017-09-15 22:12:25 -04:00
Andrew Plaza (insidious)	6198fed566	Updated README in ergodox_infinity keyboard (#1702 ) * changed 'infinity' to 'ergodox_infinity' and specified to be in the top-level directory as per recent changes to directory structure of QMK_firmware git repo * accidently removed '-' in last line of readme	2017-09-15 22:01:51 -04:00
lucwastiaux	3e1f388bda	Adding Ergodox EZ and Atreus Dvorak 42-key layouts (#1705 ) * importing 42 key dvorak layout * added comment for build instructions * adding atreus dvorak 42 key layout * added readme * add readme * build instructions * additional MEH shortcuts	2017-09-15 22:00:26 -04:00
Rob Rogers	7bcf3e2781	Wording changes for the WSL install script	2017-09-15 21:59:56 -04:00
Jack Humbert	5ad5c230d6	Merge branch 'luizribeiro-ps2avrGB'	2017-09-15 21:44:39 -04:00
Jack Humbert	dc7d0c7b74	update to driver separation	2017-09-15 21:43:58 -04:00
krusli	afcf3a2878	Update Mechmini keymap, reduce reported power consumption for iOS Camera Adapter compatibility	2017-09-15 20:11:40 -04:00
Luiz Ribeiro	d5486265b8	Merge branch 'master' into ps2avrGB	2017-07-04 11:17:28 -04:00
Luiz Ribeiro	738b072bb0	Fixed indentation and now using quantum keycodes for rgblight	2017-07-04 11:12:42 -04:00
Luiz Ribeiro	60153e7bbc	Always send 3 * RGBLED_NUM bytes through I2C on ps2avrGB This wasn't going to work on boards with a different number of LEDs, since I was always sending 48 bytes.	2017-06-11 12:30:48 -04:00
Luiz Ribeiro	945f2f5916	Fixed rgblight_types.h	2017-06-11 12:30:48 -04:00
Luiz Ribeiro	d4cd5dda5c	Added a build flag for using a custom rgblight driver	2017-06-11 12:30:48 -04:00
Luiz Ribeiro	964d7060e1	Simplified ps2avrGB rgblight_set logic a bit	2017-06-11 12:30:48 -04:00
Luiz Ribeiro	6037cede2c	rgblight support for ps2avrGB	2017-06-11 12:30:48 -04:00