helper to compare current layer_state to user layer

Performs the same bit comparison that the layer_move
functions perform

keyboards/crawlpad/config.h

@@ -0,0 +1,52 @@
+#ifndef CONFIG_H
+#define CONFIG_H
+
+#include "config_common.h"
+
+/* USB Device descriptor parameter */
+#define VENDOR_ID       0xFEED
+#define PRODUCT_ID      0x6070
+#define DEVICE_VER      0x0001
+#define MANUFACTURER    WoodKeys.click
+#define PRODUCT         CrawlPad
+#define DESCRIPTION     ATX Keycrawl 2017
+
+/* key matrix size */
+#define MATRIX_ROWS 4
+#define MATRIX_COLS 4
+
+/* key matrix pins */
+#define MATRIX_ROW_PINS { F0, F1, F4, F5 }
+#define MATRIX_COL_PINS { D4, D5, D6, D7 }
+#define UNUSED_PINS
+
+/* Pins for custom per-row LEDs. Should be changed to use named pins. */
+#define LED_ROW_PINS { 8, 9, 10, 11 }
+
+/* COL2ROW or ROW2COL */
+#define DIODE_DIRECTION ROW2COL
+
+/* Set 0 if debouncing isn't needed */
+#define DEBOUNCING_DELAY 5
+
+/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
+#define LOCKING_SUPPORT_ENABLE
+
+/* Locking resynchronize hack */
+#define LOCKING_RESYNC_ENABLE
+
+/* key combination for command */
+#define IS_COMMAND() ( \
+    false \
+)
+
+/* prevent stuck modifiers */
+#define PREVENT_STUCK_MODIFIERS
+
+#ifdef RGBLIGHT_ENABLE
+#define RGB_DI_PIN D3
+#define RGBLIGHT_ANIMATIONS
+#define RGBLED_NUM 3
+#endif
+
+#endif

keyboards/crawlpad/crawlpad.c

@@ -0,0 +1 @@
+#include "crawlpad.h"

keyboards/crawlpad/crawlpad.h

@@ -0,0 +1,18 @@
+#ifndef KB_H
+#define KB_H
+
+#include "quantum.h"
+
+#define KEYMAP( \
+	K00, K01, K02, K03, \
+	K10, K11, K12, K13, \
+	K20, K21, K22, K23, \
+	K30, K31, K32, K33  \
+) { \
+	{ K00,   K01,   K02,   K03 }, \
+	{ K10,   K11,   K12,   K13 }, \
+	{ K20,   K21,   K22,   K23 }, \
+	{ K30,   K31,   K32,   K33 }  \
+}
+
+#endif

keyboards/crawlpad/keymaps/default/keymap.c

@@ -0,0 +1,117 @@
+#include "../../crawlpad.h"
+
+enum custom_keycodes {
+  BL1 = SAFE_RANGE,
+  BL2,
+  BL3,
+  BL4
+};
+
+const uint8_t LED_PINS[] = LED_ROW_PINS;
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+
+KEYMAP(
+    KC_P7, KC_P8, KC_P9, KC_PPLS,
+    KC_P4, KC_P5, KC_P6, KC_PMNS,
+    KC_P1, KC_P2, KC_P3, KC_PAST,
+    MO(1), KC_P0, KC_PDOT, KC_ENT),
+
+KEYMAP(
+    KC_NLCK, BL1, KC_TRNS, KC_PSLS,
+    RESET, BL2, KC_TRNS, KC_TRNS,
+    KC_TRNS, BL3, KC_TRNS, KC_TRNS,
+    KC_TRNS, BL4, KC_TRNS, KC_TRNS),
+
+};
+
+void set_led(int idx, bool enable) {
+  uint8_t pin = LED_PINS[idx];
+  if (enable) {
+    _SFR_IO8((pin >> 4) + 2) |= _BV(pin & 0xF);
+  } else {
+    /* PORTx &= ~n */
+    _SFR_IO8((pin >> 4) + 2) &= ~_BV(pin & 0xF);
+  }
+}
+
+const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) {
+  return MACRO_NONE ;
+}
+
+void matrix_init_user(void) {
+  /* set LED row pins to output and low */
+  DDRB |= (1 << 4) | (1 << 5) | (1 << 6) | (1 << 7);
+  PORTB &= ~(1 << 4) & ~(1 << 5) & ~(1 << 6) & ~(1 << 7);
+}
+
+void matrix_scan_user(void) {
+}
+
+bool process_record_user(uint16_t keycode, keyrecord_t *record) {
+  switch (keycode) {
+  case BL1:
+    if (record->event.pressed) {
+      PORTB |= (1 << 4);
+    } else {
+      PORTB &= ~(1 << 4);
+    }
+    return false;
+  case BL2:
+    if (record->event.pressed) {
+      PORTB |= (1 << 5);
+    } else {
+      PORTB &= ~(1 << 5);
+    }
+    return false;
+  case BL3:
+    if (record->event.pressed) {
+      PORTB |= (1 << 6);
+    } else {
+      PORTB &= ~(1 << 6);
+    }
+    return false;
+  case BL4:
+    if (record->event.pressed) {
+      PORTB |= (1 << 7);
+    } else {
+      PORTB &= ~(1 << 7);
+    }
+    return false;
+  }
+  return true;
+}
+
+void led_set_user(uint8_t usb_led) {
+
+  if (usb_led & (1 << USB_LED_NUM_LOCK)) {
+
+  } else {
+
+  }
+
+  if (usb_led & (1 << USB_LED_CAPS_LOCK)) {
+
+  } else {
+
+  }
+
+  if (usb_led & (1 << USB_LED_SCROLL_LOCK)) {
+
+  } else {
+
+  }
+
+  if (usb_led & (1 << USB_LED_COMPOSE)) {
+
+  } else {
+
+  }
+
+  if (usb_led & (1 << USB_LED_KANA)) {
+
+  } else {
+
+  }
+
+}

keyboards/crawlpad/readme.md

@@ -0,0 +1,17 @@
+# Crawlpad
+
+![Crawlpad](https://imgur.com/8BnztWo)
+
+A 4x4 macropad/numpad, exclusively availabe at Keycrawl events.
+
+Keyboard Maintainer: [Cole Markham](https://github.com/colemarkham)  
+Hardware Supported: Crawlpad  
+Hardware Availability: Exclusive to Keycrawl events, contact [awwwwwwyeaahhhhhh](https://www.reddit.com/user/awwwwwwyeaahhhhhh) for more details.
+
+Make example for this keyboard (after setting up your build environment):
+
+    make crawlpad:default
+
+See [build environment setup](https://docs.qmk.fm/build_environment_setup.html) then the [make instructions](https://docs.qmk.fm/make_instructions.html) for more information.
+
+For those that prefer a GUI tool, the crawlpad.json file in this repo can be used on [kbfirmware.com](http://kbfirmware.com].

keyboards/crawlpad/rules.mk

@@ -0,0 +1,56 @@
+# MCU name
+MCU = atmega32u4
+
+# Processor frequency.
+#     This will define a symbol, F_CPU, in all source code files equal to the
+#     processor frequency in Hz. You can then use this symbol in your source code to
+#     calculate timings. Do NOT tack on a 'UL' at the end, this will be done
+#     automatically to create a 32-bit value in your source code.
+#
+#     This will be an integer division of F_USB below, as it is sourced by
+#     F_USB after it has run through any CPU prescalers. Note that this value
+#     does not *change* the processor frequency - it should merely be updated to
+#     reflect the processor speed set externally so that the code can use accurate
+#     software delays.
+F_CPU = 16000000
+
+#
+# LUFA specific
+#
+# Target architecture (see library "Board Types" documentation).
+ARCH = AVR8
+
+# Input clock frequency.
+#     This will define a symbol, F_USB, in all source code files equal to the
+#     input clock frequency (before any prescaling is performed) in Hz. This value may
+#     differ from F_CPU if prescaling is used on the latter, and is required as the
+#     raw input clock is fed directly to the PLL sections of the AVR for high speed
+#     clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
+#     at the end, this will be done automatically to create a 32-bit value in your
+#     source code.
+#
+#     If no clock division is performed on the input clock inside the AVR (via the
+#     CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
+F_USB = $(F_CPU)
+
+# Interrupt driven control endpoint task(+60)
+OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
+
+
+# Boot Section Size in *bytes*
+OPT_DEFS += -DBOOTLOADER_SIZE=4096
+
+
+# Build Options
+#   comment out to disable the options.
+#
+BOOTMAGIC_ENABLE ?= no	# Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE ?= yes	# Mouse keys(+4700)
+EXTRAKEY_ENABLE ?= yes	# Audio control and System control(+450)
+CONSOLE_ENABLE ?= no	# Console for debug(+400)
+COMMAND_ENABLE ?= no    # Commands for debug and configuration
+SLEEP_LED_ENABLE ?= no  # Breathing sleep LED during USB suspend
+NKRO_ENABLE ?= yes		# USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+BACKLIGHT_ENABLE ?= no  # [Crawlpad] Custom backlighting code is used, so this should not be enabled
+AUDIO_ENABLE ?= no # [Crawlpad] This can be enabled if a speaker is connected to the expansion port. Not compatible with RGBLIGHT below
+RGBLIGHT_ENABLE ?= no # [Crawlpad] This can be enabled if a ws2812 strip is connected to the expansion port.

keyboards/do60/config.h

@@ -0,0 +1,82 @@
+/*
+Copyright 2012 Doyu Studio <sy_yang@doyustudio.com>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program. If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#ifndef CONFIG_H
+#define CONFIG_H
+
+#include "config_common.h"
+
+/* USB Device descriptor parameter */
+#define VENDOR_ID       0xFEED
+#define PRODUCT_ID      0x6060
+#define DEVICE_VER      0x0001
+#define MANUFACTURER    Shopkey by Doyu Studio
+#define PRODUCT         Do60
+#define DESCRIPTION     Do60 Keyboard PCB by Doyu Studio
+
+/* key matrix size */
+#define MATRIX_ROWS 5
+#define MATRIX_COLS 15
+
+/*
+ * Keyboard Matrix Assignments
+ *
+ * Change this to how you wired your keyboard
+ * COLS: AVR pins used for columns, left to right
+ * ROWS: AVR pins used for rows, top to bottom
+ * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
+ *         ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
+ *
+*/
+#define MATRIX_ROW_PINS { D0, D1, D2, D3, D5 }
+#define MATRIX_COL_PINS { F0, F1, E6, C7, C6, B6, D4, B1, B7, B5, B4, D7, D6, B3, B0 }
+#define UNUSED_PINS
+
+/* Backlight Setup */
+#define BACKLIGHT_PIN F4
+#define BACKLIGHT_LEVELS 6
+//#define BACKLIGHT_BREATHING
+
+/* COL2ROW or ROW2COL */
+#define DIODE_DIRECTION COL2ROW
+
+/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
+#define DEBOUNCING_DELAY 5
+
+/* RGB Underglow
+ * F5 PIN for DO60's pre-soldered WS2812 LEDs
+ */
+#define RGB_DI_PIN F5
+#define RGBLIGHT_ANIMATIONS
+#define RGBLED_NUM 20    			// Number of LEDs
+#define RGBLIGHT_HUE_STEP 10
+#define RGBLIGHT_SAT_STEP 15
+#define RGBLIGHT_VAL_STEP 15
+
+/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
+#define LOCKING_SUPPORT_ENABLE
+/* Locking resynchronize hack */
+#define LOCKING_RESYNC_ENABLE
+
+/* key combination for magic key command */
+#define IS_COMMAND() ( \
+  keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
+)
+
+#define TAPPING_TERM 200
+
+#endif

keyboards/do60/do60.c

@@ -0,0 +1,19 @@
+#include "do60.h"
+
+
+extern inline void do60_caps_led_on(void);
+extern inline void do60_bl_led_on(void);
+
+extern inline void do60_caps_led_off(void);
+extern inline void do60_bl_led_off(void);
+
+
+void led_set_kb(uint8_t usb_led) {
+	if (usb_led & (1<<USB_LED_CAPS_LOCK)) {
+		do60_caps_led_on();
+	} else {
+		do60_caps_led_off();
+	}
+
+	led_set_user(usb_led);
+}

keyboards/do60/do60.h

@@ -0,0 +1,41 @@
+#ifndef DO60_H
+#define DO60_H
+
+#include "quantum.h"
+#include "led.h"
+
+/* DO60 LEDs
+ *   GPIO pads
+ *   0 F7 not connected
+ *   1 F6 RGB PWM Underglow
+ *   2 F5 Backlight LED
+ *   3 F4 not connected
+ *   B2 Capslock LED
+ *   B0 not connected
+ */
+
+
+inline void do60_caps_led_on(void)    { DDRB |=  (1<<2); PORTB &= ~(1<<2); }
+inline void do60_bl_led_on(void)    	{ DDRF |=  (1<<4); PORTF &= ~(1<<4); }
+
+inline void do60_caps_led_off(void)   { DDRB &= ~(1<<2); PORTB &= ~(1<<2); }
+inline void do60_bl_led_off(void)   	{ DDRF &= ~(1<<4); PORTF &= ~(1<<4); }
+
+
+
+/* Do60 Keymap Definition Macro */
+#define KEYMAP( \
+      K00,  K01,  K02,  K03,  K04,  K05,  K06,  K07,  K08,  K09,  K0A,  K0B,  K0C,  K0D,  K0E, \
+      K10,  K11,  K12,  K13,  K14,  K15,  K16,  K17,  K18,  K19,  K1A,  K1B,  K1C,        K1E, \
+      K20,  K21,  K22,  K23,  K24,  K25,  K26,  K27,  K28,  K29,  K2A,  K2B,  K2C,        K2E, \
+      K30,  K31,  K32,  K33,  K34,  K35,  K36,  K37,  K38,  K39,  K3A,  K3B,  K3C,  K3D,  K3E, \
+      K40,  K41,  K42,              K45,  K46,  K47,              K4A,  K4B,  K4C,  K4D,  K4E  \
+) { \
+    { K00,  K01,  K02,  K03,  K04,  K05,  K06,  K07,  K08,  K09,  K0A,  K0B,  K0C,  K0D,   K0E }, \
+    { K10,  K11,  K12,  K13,  K14,  K15,  K16,  K17,  K18,  K19,  K1A,  K1B,  K1C,  KC_NO, K1E }, \
+    { K20,  K21,  K22,  K23,  K24,  K25,  K26,  K27,  K28,  K29,  K2A,  K2B,  K2C,  KC_NO, K2E }, \
+    { K30,  K31,  K32,  K33,  K34,  K35,  K36,  K37,  K38,  K39,  K3A,  K3B,  K3C,  K3D,   K3E }, \
+    { K40,  K41,  K42,  KC_NO,KC_NO,K45,  K46,  K47,  KC_NO,KC_NO,K4A,  K4B,  K4C,  K4D,   K4E }  \
+}
+
+#endif

keyboards/do60/keymaps/default/keymap.c

@@ -0,0 +1,47 @@
+#include "do60.h"
+#include "action_layer.h"
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+
+  // 0: Base Layer
+  [0] = KEYMAP(
+      KC_ESC,  KC_1,    KC_2,    KC_3,    KC_4,   KC_5,   KC_6,   KC_7,   KC_8,   KC_9,    KC_0,    KC_MINS,  KC_EQL,  KC_GRV,   KC_BSPC,   \
+      KC_TAB,  KC_Q,    KC_W,    KC_E,    KC_R,   KC_T,   KC_Y,   KC_U,   KC_I,   KC_O,    KC_P,    KC_LBRC,  KC_RBRC,           KC_BSLS,   \
+      KC_CAPS, KC_A,    KC_S,    KC_D,    KC_F,   KC_G,   KC_H,   KC_J,   KC_K,   KC_L,    KC_SCLN, KC_QUOT,  KC_NO,             KC_ENT,    \
+      KC_LSFT, KC_NO,   KC_Z,    KC_X,    KC_C,   KC_V,   KC_B,   KC_N,   KC_M,   KC_COMM, KC_DOT,  KC_RSFT,  KC_NO,   KC_UP,    KC_SLSH,    \
+      KC_LCTL, KC_LGUI, KC_LALT,                  KC_SPC, KC_NO,  KC_BSPC,                 KC_RGUI, F(0),     KC_LEFT, KC_DOWN,  KC_RIGHT),
+
+  // 1: Function Layer
+  [1] = KEYMAP(
+      RESET,   KC_F1,   KC_F2,   KC_F3,   KC_F4,    KC_F5,  KC_F6,  KC_F7,  KC_F8,  KC_F9,   KC_F10,  KC_F11,   KC_F12,  KC_NO,    KC_NO,     \
+      KC_NO,   RGB_HUI, RGB_SAI, RGB_VAI, RGB_MOD,  KC_HOME,KC_CALC,KC_NO,  KC_INS, KC_NO,   KC_PSCR, KC_SLCK,  KC_PAUS,          KC_DEL,    \
+      KC_NO,   RGB_HUD, RGB_SAD, RGB_VAD, RGB_SMOD, KC_END, KC_PGDN,KC_NO,  KC_NO,  KC_NO,   KC_HOME, KC_PGUP,  KC_NO,            KC_ENT,    \
+      KC_LSFT, KC_NO,   KC_NO,   KC_APP,  BL_STEP,  KC_NO,  KC_NO,  KC_VOLD,KC_VOLU,KC_MUTE, KC_END,  KC_RSFT,  KC_NO  , KC_PGUP,  KC_INS,    \
+      KC_LCTL, KC_LGUI, KC_LALT,                    KC_BSPC,KC_SPC, KC_DEL,                  KC_RGUI, F(0),     KC_HOME, KC_PGDOWN,KC_END),
+
+};
+
+// Custom Actions
+ const uint16_t PROGMEM fn_actions[] = {
+     [0] = ACTION_LAYER_MOMENTARY(1),  // to Fn overlay
+ };
+
+// Macros
+/*
+const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) {
+
+  // MACRODOWN only works in this function
+  switch(id) {
+    case 0:
+      if (record->event.pressed) { register_code(KC_RSFT); }
+      else { unregister_code(KC_RSFT); }
+      break;
+  }
+
+  return MACRO_NONE;
+};
+*/
+// Loop
+void matrix_scan_user(void) {
+  // Empty
+};

keyboards/do60/keymaps/default/readme.md

@@ -0,0 +1,5 @@
+![Uses this layout](https://i.redd.it/v64eqwsrk8jx.jpg)
+
+All of the keys which CAN have a function should be assigned one.
+
+The keys with KC_NO cannot be assigned a value

keyboards/do60/keymaps/test/keymap.c

@@ -0,0 +1,47 @@
+#include "do60.h"
+#include "action_layer.h"
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+
+  // 0: Base Layer
+  [0] = KEYMAP(
+      KC_ESC,  KC_1,    KC_2,    KC_3,    KC_4,   KC_5,   KC_6,   KC_7,   KC_8,   KC_9,    KC_0,    KC_MINS,  KC_EQL,  KC_NO,    KC_BSPC,   \
+      KC_TAB,  KC_Q,    KC_W,    KC_E,    KC_R,   KC_T,   KC_Y,   KC_U,   KC_I,   KC_O,    KC_P,    KC_LBRC,  KC_RBRC,           KC_BSLS,   \
+      KC_CAPS, KC_A,    KC_S,    KC_D,    KC_F,   KC_G,   KC_H,   KC_J,   KC_K,   KC_L,    KC_SCLN, KC_QUOT,  KC_NO,             KC_ENT,    \
+      KC_LSFT, KC_NO,   KC_Z,    KC_X,    KC_C,   KC_V,   KC_B,   KC_N,   KC_M,   KC_COMM, KC_DOT,  KC_SLSH,  KC_RSFT, KC_UP,    KC_UP,    \
+      KC_LCTL, KC_LGUI, KC_LALT,                  KC_BSPC,KC_SPC, KC_DEL,                  KC_RGUI, F(0),    KC_LEFT, KC_DOWN,  KC_RIGHT),
+
+  // 1: Function Layer
+  [1] = KEYMAP(
+      RESET,   KC_F1,   KC_F2,   KC_F3,   KC_F4,    KC_F5,  KC_F6,  KC_F7,  KC_F8,  KC_F9,   KC_F10,  KC_F11,   KC_F12,  KC_NO,    KC_NO,     \
+      KC_NO,   RGB_HUI, RGB_SAI, RGB_VAI, RGB_MOD,  KC_HOME,KC_CALC,KC_NO,  KC_INS, KC_NO,   KC_PSCR, KC_SLCK,  KC_PAUS,          KC_DEL,    \
+      KC_NO,   RGB_HUD, RGB_SAD, RGB_VAD, RGB_SMOD, KC_END, KC_PGDN,KC_NO,  KC_NO,  KC_NO,   KC_HOME, KC_PGUP,  KC_NO,            KC_ENT,    \
+      KC_LSFT, KC_NO,   KC_NO,   KC_APP,  BL_STEP,  KC_NO,  KC_NO,  KC_VOLD,KC_VOLU,KC_MUTE, KC_END,  KC_RSFT,  KC_NO  , KC_PGUP,  KC_INS,    \
+      KC_LCTL, KC_LGUI, KC_LALT,                    KC_BSPC,KC_SPC, KC_DEL,                  KC_RGUI, F(0),     KC_HOME, KC_PGDOWN,KC_END),
+
+};
+
+// Custom Actions
+ const uint16_t PROGMEM fn_actions[] = {
+     [0] = ACTION_LAYER_MOMENTARY(1),  // to Fn overlay
+ };
+
+// Macros
+/*
+const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) {
+
+  // MACRODOWN only works in this function
+  switch(id) {
+    case 0:
+      if (record->event.pressed) { register_code(KC_RSFT); }
+      else { unregister_code(KC_RSFT); }
+      break;
+  }
+
+  return MACRO_NONE;
+};
+*/
+// Loop
+void matrix_scan_user(void) {
+  // Empty
+};

keyboards/do60/keymaps/test/readme.md

@@ -0,0 +1,5 @@
+![Uses this layout](https://i.redd.it/v64eqwsrk8jx.jpg)
+
+All of the keys which CAN have a function should be assigned one.
+
+The keys with KC_NO cannot be assigned a value

keyboards/do60/readme.md

@@ -0,0 +1,11 @@
+# QMK Firmware for DoyuStudio DO60 PCB
+
+
+## Quantum MK Firmware
+For the full Quantum feature list, see [the parent readme.md](/readme.md).
+
+Board supports in-switch LEDs (two-pin, single colour)
+Build-in WS2182 RGB LED for underglow lighting.
+
+## Build
+To build the default keymap, simply run `make do60:default`.

keyboards/do60/rules.mk

@@ -0,0 +1,64 @@
+# MCU name
+MCU = atmega32u4
+
+
+# Processor frequency.
+#     This will define a symbol, F_CPU, in all source code files equal to the
+#     processor frequency in Hz. You can then use this symbol in your source code to
+#     calculate timings. Do NOT tack on a 'UL' at the end, this will be done
+#     automatically to create a 32-bit value in your source code.
+#
+#     This will be an integer division of F_USB below, as it is sourced by
+#     F_USB after it has run through any CPU prescalers. Note that this value
+#     does not *change* the processor frequency - it should merely be updated to
+#     reflect the processor speed set externally so that the code can use accurate
+#     software delays.
+F_CPU = 16000000
+
+
+# LUFA specific
+# Target architecture (see library "Board Types" documentation).
+ARCH = AVR8
+
+
+# Input clock frequency.
+#     This will define a symbol, F_USB, in all source code files equal to the
+#     input clock frequency (before any prescaling is performed) in Hz. This value may
+#     differ from F_CPU if prescaling is used on the latter, and is required as the
+#     raw input clock is fed directly to the PLL sections of the AVR for high speed
+#     clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
+#     at the end, this will be done automatically to create a 32-bit value in your
+#     source code.
+#
+#     If no clock division is performed on the input clock inside the AVR (via the
+#     CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
+F_USB = $(F_CPU)
+
+
+# Interrupt driven control endpoint task(+60)
+OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
+
+
+# Boot Section Size in *bytes*
+#   Teensy halfKay   512
+#   Teensy++ halfKay 1024
+#   Atmel DFU loader 4096
+#   LUFA bootloader  4096
+#   USBaspLoader     2048
+OPT_DEFS += -DBOOTLOADER_SIZE=4096
+
+
+# Build Options
+AUDIO_ENABLE = no           # Audio output on port C6
+BACKLIGHT_ENABLE = yes      # Enable keyboard backlight functionality
+BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
+BOOTMAGIC_ENABLE = yes      # Virtual DIP switch configuration(+1000)
+COMMAND_ENABLE = no         # Commands for debug and configuration
+CONSOLE_ENABLE = no         # Console for debug(+400)
+EXTRAKEY_ENABLE = yes       # Audio control and System control(+450)
+MIDI_ENABLE = no            # MIDI controls
+MOUSEKEY_ENABLE = yes       # Mouse keys(+4700)
+NKRO_ENABLE = yes           # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+RGBLIGHT_ENABLE = yes       # Enable WS2812 RGB underlight.  Do not enable this with audio at the same time.
+SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
+UNICODE_ENABLE = no         # Unicode

keyboards/ergo42/config.h

@@ -0,0 +1,24 @@
+/*
+Copyright 2012 Jun Wako <wakojun@gmail.com>
+Copyright 2015 Jack Humbert
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#ifndef CONFIG_H
+#define CONFIG_H
+
+#include "config_common.h"
+
+#endif

keyboards/ergo42/ergo42.c

@@ -0,0 +1,16 @@
+#include "ergo42.h"
+
+#ifdef ONEHAND_ENABLE
+__attribute__ ((weak))
+const keypos_t hand_swap_config[MATRIX_ROWS][MATRIX_COLS] = {
+
+  {{0, 4}, {1, 4}, {2, 4}, {3, 4}, {4, 4}, {5, 4}, {6, 4}},
+  {{0, 5}, {1, 5}, {2, 5}, {3, 5}, {4, 5}, {5, 5}, {6, 5}},
+  {{0, 6}, {1, 6}, {2, 6}, {3, 6}, {4, 6}, {5, 6}, {6, 6}},
+  {{0, 7}, {1, 7}, {2, 7}, {3, 7}, {4, 7}, {5, 7}, {6, 7}},
+  {{0, 0}, {1, 0}, {2, 0}, {3, 0}, {4, 0}, {5, 0}, {6, 0}},
+  {{0, 1}, {1, 1}, {2, 1}, {3, 1}, {4, 1}, {5, 1}, {6, 1}},
+  {{0, 2}, {1, 2}, {2, 2}, {3, 2}, {4, 2}, {5, 2}, {6, 2}},
+  {{0, 3}, {1, 3}, {2, 3}, {3, 3}, {4, 3}, {5, 3}, {6, 3}},
+};
+#endif

keyboards/ergo42/ergo42.h

@@ -0,0 +1,27 @@
+#ifndef ERGO42_H
+#define ERGO42_H
+
+#include "quantum.h"
+
+#ifdef KEYBOARD_ergo42_rev1
+    #include "rev1.h"
+#endif
+
+
+// Used to create a keymap using only KC_ prefixed keys
+#define KC_KEYMAP( \
+    L00, L01, L02, L03, L04, L05, L06, R00, R01, R02, R03, R04, R05, R06, \
+    L10, L11, L12, L13, L14, L15, L16, R10, R11, R12, R13, R14, R15, R16, \
+    L20, L21, L22, L23, L24, L25, L26, R20, R21, R22, R23, R24, R25, R26, \
+    L30, L31, L32, L33, L34, L35, L36, R30, R31, R32, R33, R34, R35, R36 \
+    ) \
+    KEYMAP( \
+        KC_##L00, KC_##L01, KC_##L02, KC_##L03, KC_##L04, KC_##L05, KC_##L06, KC_##R00, KC_##R01, KC_##R02, KC_##R03, KC_##R04, KC_##R05, KC_##R06, \
+        KC_##L10, KC_##L11, KC_##L12, KC_##L13, KC_##L14, KC_##L15, KC_##L16, KC_##R10, KC_##R11, KC_##R12, KC_##R13, KC_##R14, KC_##R15, KC_##R16, \
+        KC_##L20, KC_##L21, KC_##L22, KC_##L23, KC_##L24, KC_##L25, KC_##L26, KC_##R20, KC_##R21, KC_##R22, KC_##R23, KC_##R24, KC_##R25, KC_##R26, \
+        KC_##L30, KC_##L31, KC_##L32, KC_##L33, KC_##L34, KC_##L35, KC_##L36, KC_##R30, KC_##R31, KC_##R32, KC_##R33, KC_##R34, KC_##R35, KC_##R36 \
+    )
+
+#define KC_LAYOUT_ortho_4x14 KC_KEYMAP
+
+#endif

keyboards/ergo42/i2c.c

@@ -0,0 +1,162 @@
+#include <util/twi.h>
+#include <avr/io.h>
+#include <stdlib.h>
+#include <avr/interrupt.h>
+#include <util/twi.h>
+#include <stdbool.h>
+#include "i2c.h"
+
+#ifdef USE_I2C
+
+// Limits the amount of we wait for any one i2c transaction.
+// Since were running SCL line 100kHz (=> 10μs/bit), and each transactions is
+// 9 bits, a single transaction will take around 90μs to complete.
+//
+// (F_CPU/SCL_CLOCK)  =>  # of μC cycles to transfer a bit
+// poll loop takes at least 8 clock cycles to execute
+#define I2C_LOOP_TIMEOUT (9+1)*(F_CPU/SCL_CLOCK)/8
+
+#define BUFFER_POS_INC() (slave_buffer_pos = (slave_buffer_pos+1)%SLAVE_BUFFER_SIZE)
+
+volatile uint8_t i2c_slave_buffer[SLAVE_BUFFER_SIZE];
+
+static volatile uint8_t slave_buffer_pos;
+static volatile bool slave_has_register_set = false;
+
+// Wait for an i2c operation to finish
+inline static
+void i2c_delay(void) {
+  uint16_t lim = 0;
+  while(!(TWCR & (1<<TWINT)) && lim < I2C_LOOP_TIMEOUT)
+    lim++;
+
+  // easier way, but will wait slightly longer
+  // _delay_us(100);
+}
+
+// Setup twi to run at 100kHz
+void i2c_master_init(void) {
+  // no prescaler
+  TWSR = 0;
+  // Set TWI clock frequency to SCL_CLOCK. Need TWBR>10.
+  // Check datasheets for more info.
+  TWBR = ((F_CPU/SCL_CLOCK)-16)/2;
+}
+
+// Start a transaction with the given i2c slave address. The direction of the
+// transfer is set with I2C_READ and I2C_WRITE.
+// returns: 0 => success
+//          1 => error
+uint8_t i2c_master_start(uint8_t address) {
+  TWCR = (1<<TWINT) | (1<<TWEN) | (1<<TWSTA);
+
+  i2c_delay();
+
+  // check that we started successfully
+  if ( (TW_STATUS != TW_START) && (TW_STATUS != TW_REP_START))
+    return 1;
+
+  TWDR = address;
+  TWCR = (1<<TWINT) | (1<<TWEN);
+
+  i2c_delay();
+
+  if ( (TW_STATUS != TW_MT_SLA_ACK) && (TW_STATUS != TW_MR_SLA_ACK) )
+    return 1; // slave did not acknowledge
+  else
+    return 0; // success
+}
+
+
+// Finish the i2c transaction.
+void i2c_master_stop(void) {
+  TWCR = (1<<TWINT) | (1<<TWEN) | (1<<TWSTO);
+
+  uint16_t lim = 0;
+  while(!(TWCR & (1<<TWSTO)) && lim < I2C_LOOP_TIMEOUT)
+    lim++;
+}
+
+// Write one byte to the i2c slave.
+// returns 0 => slave ACK
+//         1 => slave NACK
+uint8_t i2c_master_write(uint8_t data) {
+  TWDR = data;
+  TWCR = (1<<TWINT) | (1<<TWEN);
+
+  i2c_delay();
+
+  // check if the slave acknowledged us
+  return (TW_STATUS == TW_MT_DATA_ACK) ? 0 : 1;
+}
+
+// Read one byte from the i2c slave. If ack=1 the slave is acknowledged,
+// if ack=0 the acknowledge bit is not set.
+// returns: byte read from i2c device
+uint8_t i2c_master_read(int ack) {
+  TWCR = (1<<TWINT) | (1<<TWEN) | (ack<<TWEA);
+
+  i2c_delay();
+  return TWDR;
+}
+
+void i2c_reset_state(void) {
+  TWCR = 0;
+}
+
+void i2c_slave_init(uint8_t address) {
+  TWAR = address << 0; // slave i2c address
+  // TWEN  - twi enable
+  // TWEA  - enable address acknowledgement
+  // TWINT - twi interrupt flag
+  // TWIE  - enable the twi interrupt
+  TWCR = (1<<TWIE) | (1<<TWEA) | (1<<TWINT) | (1<<TWEN);
+}
+
+ISR(TWI_vect);
+
+ISR(TWI_vect) {
+  uint8_t ack = 1;
+  switch(TW_STATUS) {
+    case TW_SR_SLA_ACK:
+      // this device has been addressed as a slave receiver
+      slave_has_register_set = false;
+      break;
+
+    case TW_SR_DATA_ACK:
+      // this device has received data as a slave receiver
+      // The first byte that we receive in this transaction sets the location
+      // of the read/write location of the slaves memory that it exposes over
+      // i2c.  After that, bytes will be written at slave_buffer_pos, incrementing
+      // slave_buffer_pos after each write.
+      if(!slave_has_register_set) {
+        slave_buffer_pos = TWDR;
+        // don't acknowledge the master if this memory loctaion is out of bounds
+        if ( slave_buffer_pos >= SLAVE_BUFFER_SIZE ) {
+          ack = 0;
+          slave_buffer_pos = 0;
+        }
+        slave_has_register_set = true;
+      } else {
+        i2c_slave_buffer[slave_buffer_pos] = TWDR;
+        BUFFER_POS_INC();
+      }
+      break;
+
+    case TW_ST_SLA_ACK:
+    case TW_ST_DATA_ACK:
+      // master has addressed this device as a slave transmitter and is
+      // requesting data.
+      TWDR = i2c_slave_buffer[slave_buffer_pos];
+      BUFFER_POS_INC();
+      break;
+
+    case TW_BUS_ERROR: // something went wrong, reset twi state
+      TWCR = 0;
+    default:
+      break;
+  }
+  // Reset everything, so we are ready for the next TWI interrupt
+  TWCR |= (1<<TWIE) | (1<<TWINT) | (ack<<TWEA) | (1<<TWEN);
+}
+#endif

keyboards/ergo42/i2c.h

@@ -0,0 +1,49 @@
+#ifndef I2C_H
+#define I2C_H
+
+#include <stdint.h>
+
+#ifndef F_CPU
+#define F_CPU 16000000UL
+#endif
+
+#define I2C_READ 1
+#define I2C_WRITE 0
+
+#define I2C_ACK 1
+#define I2C_NACK 0
+
+#define SLAVE_BUFFER_SIZE 0x10
+
+// i2c SCL clock frequency
+#define SCL_CLOCK  400000L
+
+extern volatile uint8_t i2c_slave_buffer[SLAVE_BUFFER_SIZE];
+
+void i2c_master_init(void);
+uint8_t i2c_master_start(uint8_t address);
+void i2c_master_stop(void);
+uint8_t i2c_master_write(uint8_t data);
+uint8_t i2c_master_read(int);
+void i2c_reset_state(void);
+void i2c_slave_init(uint8_t address);
+
+
+static inline unsigned char i2c_start_read(unsigned char addr) {
+  return i2c_master_start((addr << 1) | I2C_READ);
+}
+
+static inline unsigned char i2c_start_write(unsigned char addr) {
+  return i2c_master_start((addr << 1) | I2C_WRITE);
+}
+
+// from SSD1306 scrips
+extern unsigned char i2c_rep_start(unsigned char addr);
+extern void i2c_start_wait(unsigned char addr);
+extern unsigned char i2c_readAck(void);
+extern unsigned char i2c_readNak(void);
+extern unsigned char i2c_read(unsigned char ack);
+
+#define i2c_read(ack)  (ack) ? i2c_readAck() : i2c_readNak();
+
+#endif

keyboards/ergo42/keymaps/default-macOS/config.h

@@ -0,0 +1,37 @@
+/*
+This is the c configuration file for the keymap
+
+Copyright 2012 Jun Wako <wakojun@gmail.com>
+Copyright 2015 Jack Humbert
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#ifndef CONFIG_USER_H
+#define CONFIG_USER_H
+
+#include "../../config.h"
+
+/* Use I2C or Serial, not both */
+
+#define USE_SERIAL
+// #define USE_I2C
+
+/* Select hand configuration */
+
+#define MASTER_LEFT
+// #define MASTER_RIGHT
+// #define EE_HANDS
+
+#endif

keyboards/ergo42/keymaps/default-macOS/keymap.c

@@ -0,0 +1,98 @@
+#include "ergo42.h"
+#include "action_layer.h"
+#include "eeconfig.h"
+
+extern keymap_config_t keymap_config;
+
+#define BASE 0
+#define META 1
+#define SYMB 2
+#define GAME 3
+
+// Fillers to make layering more clear
+#define _______ KC_TRNS
+#define XXXXXXX KC_NO
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+
+/* BASE
+ * ,------------------------------------------------.   ,------------------------------------------------.
+ * | Tab  |   Q  |   W  |   E  |   R  |   T  |  [   |   |  ]   |   Y  |   U  |   I  |   O  |   P  |  @   |
+ * |------+------+------+------+------+------+------|   |-------------+------+------+------+------+------|
+ * | Alt  |   A  |   S  |   D  |   F  |   G  |  (   |   |  )   |   H  |   J  |   K  |   L  |   ;  |  :   |
+ * |------+------+------+------+------+------+------|   |------|------+------+------+------+------+------|
+ * | Sft  |   Z  |   X  |   C  |   V  |   B  |  {   |   |  }   |   N  |   M  |   ,  |   .  |   /  |\/Sft |
+ * |------+------+------+------+------+------+------|   |------+------+------+------+------+------+------|
+ * | Ctrl | GUI  |  App |PrtSc |ESC/  |Space/|Tab/  |   |Back  |Enter/| Del  |PrtSc |=>GAME|=>SYMB|  \   |
+ * |      |      |      |      |~SYMB |Cmd   |Shift |   |Space |~META |      |      |      |      |      |
+ * `------------------------------------------------'   `------------------------------------------------'
+ */
+
+[BASE] = KEYMAP( \
+  KC_TAB,   KC_Q,    KC_W,   KC_E,    KC_R,             KC_T,          KC_RBRC,       KC_BSLS,    KC_Y,             KC_U,    KC_I,     KC_O,     KC_P,     KC_LBRC, \
+  KC_LALT,  KC_A,    KC_S,   KC_D,    KC_F,             KC_G,          S(KC_8),       S(KC_9),    KC_H,             KC_J,    KC_K,     KC_L,     KC_SCLN,  KC_QUOT, \
+  KC_LSFT,  KC_Z,    KC_X,   KC_C,    KC_V,             KC_B,          S(KC_RBRC),    S(KC_BSLS), KC_N,             KC_M,    KC_COMM,  KC_DOT,   KC_SLSH,  SFT_T(KC_RO), \
+  KC_LCTRL, KC_LGUI, KC_APP, KC_PSCR, LT(SYMB, KC_ESC), GUI_T(KC_SPC), SFT_T(KC_TAB), KC_BSPC,    LT(META, KC_ENT), KC_DELT, KC_PSCR,  TG(GAME), TG(SYMB), KC_JYEN \
+),
+
+/* META
+ * ,------------------------------------------------.   ,------------------------------------------------.
+ * |   1  |   2  |   3  |   4  |   5  |   6  |  [   |   |  ]   |   7  |   8  |   9  |   0  |   -  |  ^   |
+ * |------+------+------+------+------+------+------|   |-------------+------+------+------+------+------|
+ * | Alt  |  F1  |      |Muhen | Henk |      |  (   |   |  )   | Left | Down |  Up  |Right |      |      |
+ * |------+------+------+------+------+------+------|   |------|------+------+------+------+------+------|
+ * | Sft  |  F2  |  F3  |  F4  |  F5  |  F6  |  {   |   |  }   |  F7  |  F8  |  F9  | F10  | F11  |\/Sft |
+ * |------+------+------+------+------+------+------|   |------+------+------+------+------+------+------|
+ * | Ctrl | GUI  |  App |PrtSc |ESC/  |Space/|Tab/  |   |Back  |Enter/| Del  |Reset |=>GAME|=>SYMB|  \   |
+ * |      |      |      |      |~SYMB |Ctrl  |Shift |   |Space |~META |      |      |      |      |      |
+ * `------------------------------------------------'   `------------------------------------------------'
+ */
+
+[META] = KEYMAP( \
+  KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    _______, _______, KC_7,    KC_8,    KC_9,  KC_0,    KC_MINS, KC_EQL, \
+  _______, KC_F1,   XXXXXXX, KC_MHEN, KC_HENK, XXXXXXX, _______, _______, KC_LEFT, KC_DOWN, KC_UP, KC_RGHT, XXXXXXX, XXXXXXX, \
+  _______, KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   _______, _______, KC_F7,   KC_F8,   KC_F9, KC_F10,  KC_F11,  SFT_T(KC_RO), \
+  _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, RESET, _______, _______, _______ \
+),
+
+/* SYMB
+ * ,------------------------------------------------.   ,------------------------------------------------.
+ * |   !  |   "  |   #  |   $  |   %  |   &  |  [   |   |  ]   |   '  |   (  |   )  |   ~  |   =  |  ~   |
+ * |------+------+------+------+------+------+------|   |-------------+------+------+------+------+------|
+ * | Alt  |      |      |      |      |      |  (   |   |  )   |      |      |      |      |   +  |  *   |
+ * |------+------+------+------+------+------+------|   |------|------+------+------+------+------+------|
+ * | Sft  |      |      |      |      |      |  {   |   |  }   |      |      |   <  |   >  |   ?  |  \   |
+ * |------+------+------+------+------+------+------|   |------+------+------+------+------+------+------|
+ * | Ctrl | GUI  |  App |PrtSc |ESC/  |Space/|Tab/  |   |Back  |Enter/| Del  |PrtSc |=>GAME|=>SYMB|  \   |
+ * |      |      |      |      |~SYMB |Ctrl  |Shift |   |Space |~META |      |      |      |      |      |
+ * `------------------------------------------------'   `------------------------------------------------'
+ */
+
+[SYMB] = KEYMAP( \
+  S(KC_1), S(KC_2), S(KC_3), S(KC_4), S(KC_5), S(KC_6), _______, _______, S(KC_7), S(KC_8), S(KC_9),    S(KC_0),   S(KC_MINS), S(KC_EQL), \
+  _______, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, _______, _______, XXXXXXX, XXXXXXX, XXXXXXX,    XXXXXXX,   S(KC_SCLN), S(KC_QUOT), \
+  _______, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, _______, _______, XXXXXXX, XXXXXXX, S(KC_COMM), S(KC_DOT), S(KC_SLSH), S(KC_RO), \
+  _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,    _______,   _______,    _______ \
+),
+
+/* GAME
+ * ,------------------------------------------------.   ,------------------------------------------------.
+ * | Tab  |   Q  |   W  |   E  |   R  |   T  |  [   |   |  ]   |   Y  |   U  |   I  |   O  |   P  |  @   |
+ * |------+------+------+------+------+------+------|   |-------------+------+------+------+------+------|
+ * | Alt  |   A  |   S  |   D  |   F  |   G  |  (   |   |  )   |   H  |   J  |   K  |   L  |   ;  |  :   |
+ * |------+------+------+------+------+------+------|   |------|------+------+------+------+------+------|
+ * | Sft  |   Z  |   X  |   C  |   V  |   B  |  {   |   |  }   |   N  |   M  |   ,  |   .  |   /  |\/Sft |
+ * |------+------+------+------+------+------+------|   |------+------+------+------+------+------+------|
+ * | Ctrl | GUI  |  App |PrtSc | ESC  |Space |Tab   |   |Back  |Enter | Del  |PrtSc |=>GAME|=>SYMB|  \   |
+ * |      |      |      |      |      |      |      |   |Space |      |      |      |      |      |      |
+ * `------------------------------------------------'   `------------------------------------------------'
+ */
+[GAME] = KEYMAP( \
+  KC_TAB,   KC_Q,    KC_W,   KC_E,    KC_R,   KC_T,   KC_RBRC,    KC_BSLS,    KC_Y,   KC_U,    KC_I,     KC_O,    KC_P,    KC_LBRC, \
+  KC_LALT,  KC_A,    KC_S,   KC_D,    KC_F,   KC_G,   S(KC_8),    S(KC_9),    KC_H,   KC_J,    KC_K,     KC_L,    KC_SCLN, KC_QUOT, \
+  KC_LSFT,  KC_Z,    KC_X,   KC_C,    KC_V,   KC_B,   S(KC_RBRC), S(KC_BSLS), KC_N,   KC_M,    KC_COMM,  KC_DOT,  KC_SLSH, SFT_T(KC_RO), \
+  KC_LCTRL, KC_LGUI, KC_APP, KC_PSCR, KC_ESC, KC_SPC, KC_TAB,     KC_BSPC,    KC_ENT, KC_DELT, KC_PSCR,  _______, _______, KC_JYEN \
+)
+
+};
+

keyboards/ergo42/keymaps/default-macOS/rules.mk

@@ -0,0 +1,3 @@
+ifndef QUANTUM_DIR
+	include ../../../../Makefile
+endif

keyboards/ergo42/keymaps/default/config.h

@@ -0,0 +1,37 @@
+/*
+This is the c configuration file for the keymap
+
+Copyright 2012 Jun Wako <wakojun@gmail.com>
+Copyright 2015 Jack Humbert
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#ifndef CONFIG_USER_H
+#define CONFIG_USER_H
+
+#include "../../config.h"
+
+/* Use I2C or Serial, not both */
+
+#define USE_SERIAL
+// #define USE_I2C
+
+/* Select hand configuration */
+
+#define MASTER_LEFT
+// #define MASTER_RIGHT
+// #define EE_HANDS
+
+#endif

keyboards/ergo42/keymaps/default/keymap.c

@@ -0,0 +1,98 @@
+#include "ergo42.h"
+#include "action_layer.h"
+#include "eeconfig.h"
+
+extern keymap_config_t keymap_config;
+
+#define BASE 0
+#define META 1
+#define SYMB 2
+#define GAME 3
+
+// Fillers to make layering more clear
+#define _______ KC_TRNS
+#define XXXXXXX KC_NO
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+
+/* BASE
+ * ,------------------------------------------------.   ,------------------------------------------------.
+ * | Tab  |   Q  |   W  |   E  |   R  |   T  |  [   |   |  ]   |   Y  |   U  |   I  |   O  |   P  |  @   |
+ * |------+------+------+------+------+------+------|   |-------------+------+------+------+------+------|
+ * | Alt  |   A  |   S  |   D  |   F  |   G  |  (   |   |  )   |   H  |   J  |   K  |   L  |   ;  |  :   |
+ * |------+------+------+------+------+------+------|   |------|------+------+------+------+------+------|
+ * | Sft  |   Z  |   X  |   C  |   V  |   B  |  {   |   |  }   |   N  |   M  |   ,  |   .  |   /  |\/Sft |
+ * |------+------+------+------+------+------+------|   |------+------+------+------+------+------+------|
+ * | Ctrl | GUI  |  App |PrtSc |ESC/  |Space/|Tab/  |   |Back  |Enter/| Del  |PrtSc |=>GAME|=>SYMB|  \   |
+ * |      |      |      |      |~SYMB |RCtrl |Shift |   |Space |~META |      |      |      |      |      |
+ * `------------------------------------------------'   `------------------------------------------------'
+ */
+
+[BASE] = KEYMAP( \
+  KC_TAB,   KC_Q,    KC_W,   KC_E,    KC_R,             KC_T,          KC_RBRC,       KC_BSLS,    KC_Y,             KC_U,    KC_I,     KC_O,     KC_P,     KC_LBRC, \
+  KC_LALT,  KC_A,    KC_S,   KC_D,    KC_F,             KC_G,          S(KC_8),       S(KC_9),    KC_H,             KC_J,    KC_K,     KC_L,     KC_SCLN,  KC_QUOT, \
+  KC_LSFT,  KC_Z,    KC_X,   KC_C,    KC_V,             KC_B,          S(KC_RBRC),    S(KC_BSLS), KC_N,             KC_M,    KC_COMM,  KC_DOT,   KC_SLSH,  SFT_T(KC_RO), \
+  KC_LCTRL, KC_LGUI, KC_APP, KC_PSCR, LT(SYMB, KC_ESC), RCTL_T(KC_SPC), SFT_T(KC_TAB), KC_BSPC,    LT(META, KC_ENT), KC_DELT, KC_PSCR,  TG(GAME), TG(SYMB), KC_JYEN \
+),
+
+/* META
+ * ,------------------------------------------------.   ,------------------------------------------------.
+ * |   1  |   2  |   3  |   4  |   5  |   6  |  [   |   |  ]   |   7  |   8  |   9  |   0  |   -  |  ^   |
+ * |------+------+------+------+------+------+------|   |-------------+------+------+------+------+------|
+ * | Alt  |  F1  |      |Muhen | Henk |      |  (   |   |  )   | Left | Down |  Up  |Right |      |      |
+ * |------+------+------+------+------+------+------|   |------|------+------+------+------+------+------|
+ * | Sft  |  F2  |  F3  |  F4  |  F5  |  F6  |  {   |   |  }   |  F7  |  F8  |  F9  | F10  | F11  |\/Sft |
+ * |------+------+------+------+------+------+------|   |------+------+------+------+------+------+------|
+ * | Ctrl | GUI  |  App |PrtSc |ESC/  |Space/|Tab/  |   |Back  |Enter/| Del  |Reset |=>GAME|=>SYMB|  \   |
+ * |      |      |      |      |~SYMB |RCtrl |Shift |   |Space |~META |      |      |      |      |      |
+ * `------------------------------------------------'   `------------------------------------------------'
+ */
+
+[META] = KEYMAP( \
+  KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    _______, _______, KC_7,    KC_8,    KC_9,  KC_0,    KC_MINS, KC_EQL, \
+  _______, KC_F1,   XXXXXXX, KC_MHEN, KC_HENK, XXXXXXX, _______, _______, KC_LEFT, KC_DOWN, KC_UP, KC_RGHT, XXXXXXX, XXXXXXX, \
+  _______, KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   _______, _______, KC_F7,   KC_F8,   KC_F9, KC_F10,  KC_F11,  SFT_T(KC_RO), \
+  _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, RESET, _______, _______, _______ \
+),
+
+/* SYMB
+ * ,------------------------------------------------.   ,------------------------------------------------.
+ * |   !  |   "  |   #  |   $  |   %  |   &  |  [   |   |  ]   |   '  |   (  |   )  |   ~  |   =  |  ~   |
+ * |------+------+------+------+------+------+------|   |-------------+------+------+------+------+------|
+ * | Alt  |      |      |      |      |      |  (   |   |  )   |      |      |      |      |   +  |  *   |
+ * |------+------+------+------+------+------+------|   |------|------+------+------+------+------+------|
+ * | Sft  |      |      |      |      |      |  {   |   |  }   |      |      |   <  |   >  |   ?  |  \   |
+ * |------+------+------+------+------+------+------|   |------+------+------+------+------+------+------|
+ * | Ctrl | GUI  |  App |PrtSc |ESC/  |Space/|Tab/  |   |Back  |Enter/| Del  |PrtSc |=>GAME|=>SYMB|  \   |
+ * |      |      |      |      |~SYMB |RCtrl |Shift |   |Space |~META |      |      |      |      |      |
+ * `------------------------------------------------'   `------------------------------------------------'
+ */
+
+[SYMB] = KEYMAP( \
+  S(KC_1), S(KC_2), S(KC_3), S(KC_4), S(KC_5), S(KC_6), _______, _______, S(KC_7), S(KC_8), S(KC_9),    S(KC_0),   S(KC_MINS), S(KC_EQL), \
+  _______, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, _______, _______, XXXXXXX, XXXXXXX, XXXXXXX,    XXXXXXX,   S(KC_SCLN), S(KC_QUOT), \
+  _______, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, _______, _______, XXXXXXX, XXXXXXX, S(KC_COMM), S(KC_DOT), S(KC_SLSH), S(KC_RO), \
+  _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,    _______,   _______,    _______ \
+),
+
+/* GAME
+ * ,------------------------------------------------.   ,------------------------------------------------.
+ * | Tab  |   Q  |   W  |   E  |   R  |   T  |  [   |   |  ]   |   Y  |   U  |   I  |   O  |   P  |  @   |
+ * |------+------+------+------+------+------+------|   |-------------+------+------+------+------+------|
+ * | Alt  |   A  |   S  |   D  |   F  |   G  |  (   |   |  )   |   H  |   J  |   K  |   L  |   ;  |  :   |
+ * |------+------+------+------+------+------+------|   |------|------+------+------+------+------+------|
+ * | Sft  |   Z  |   X  |   C  |   V  |   B  |  {   |   |  }   |   N  |   M  |   ,  |   .  |   /  |\/Sft |
+ * |------+------+------+------+------+------+------|   |------+------+------+------+------+------+------|
+ * | Ctrl | GUI  |  App |PrtSc | ESC  |Space |Tab   |   |Back  |Enter | Del  |PrtSc |=>GAME|=>SYMB|  \   |
+ * |      |      |      |      |      |      |      |   |Space |      |      |      |      |      |      |
+ * `------------------------------------------------'   `------------------------------------------------'
+ */
+[GAME] = KEYMAP( \
+  KC_TAB,   KC_Q,    KC_W,   KC_E,    KC_R,   KC_T,   KC_RBRC,    KC_BSLS,    KC_Y,   KC_U,    KC_I,     KC_O,    KC_P,    KC_LBRC, \
+  KC_LALT,  KC_A,    KC_S,   KC_D,    KC_F,   KC_G,   S(KC_8),    S(KC_9),    KC_H,   KC_J,    KC_K,     KC_L,    KC_SCLN, KC_QUOT, \
+  KC_LSFT,  KC_Z,    KC_X,   KC_C,    KC_V,   KC_B,   S(KC_RBRC), S(KC_BSLS), KC_N,   KC_M,    KC_COMM,  KC_DOT,  KC_SLSH, SFT_T(KC_RO), \
+  KC_LCTRL, KC_LGUI, KC_APP, KC_PSCR, KC_ESC, KC_SPC, KC_TAB,     KC_BSPC,    KC_ENT, KC_DELT, KC_PSCR,  _______, _______, KC_JYEN \
+)
+
+};
+

keyboards/ergo42/keymaps/default/rules.mk

@@ -0,0 +1,3 @@
+ifndef QUANTUM_DIR
+	include ../../../../Makefile
+endif

keyboards/ergo42/matrix.c

@@ -0,0 +1,469 @@
+/*
+Copyright 2012 Jun Wako <wakojun@gmail.com>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+/*
+ * scan matrix
+ */
+#include <stdint.h>
+#include <stdbool.h>
+#include <avr/io.h>
+#include "wait.h"
+#include "print.h"
+#include "debug.h"
+#include "util.h"
+#include "matrix.h"
+#include "split_util.h"
+#include "pro_micro.h"
+#include "config.h"
+#include "timer.h"
+
+#ifdef USE_I2C
+#  include "i2c.h"
+#else // USE_SERIAL
+#  include "serial.h"
+#endif
+
+#ifndef DEBOUNCING_DELAY
+#   define DEBOUNCING_DELAY 5
+#endif
+
+#if (DEBOUNCING_DELAY > 0)
+    static uint16_t debouncing_time;
+    static bool debouncing = false;
+#endif
+
+#if (MATRIX_COLS <= 8)
+#    define print_matrix_header()  print("\nr/c 01234567\n")
+#    define print_matrix_row(row)  print_bin_reverse8(matrix_get_row(row))
+#    define matrix_bitpop(i)       bitpop(matrix[i])
+#    define ROW_SHIFTER ((uint8_t)1)
+#else
+#    error "Currently only supports 8 COLS"
+#endif
+static matrix_row_t matrix_debouncing[MATRIX_ROWS];
+
+#define ERROR_DISCONNECT_COUNT 5
+
+#define ROWS_PER_HAND (MATRIX_ROWS/2)
+
+static uint8_t error_count = 0;
+
+static const uint8_t row_pins[MATRIX_ROWS] = MATRIX_ROW_PINS;
+static const uint8_t col_pins[MATRIX_COLS] = MATRIX_COL_PINS;
+
+/* matrix state(1:on, 0:off) */
+static matrix_row_t matrix[MATRIX_ROWS];
+static matrix_row_t matrix_debouncing[MATRIX_ROWS];
+
+#if (DIODE_DIRECTION == COL2ROW)
+    static void init_cols(void);
+    static bool read_cols_on_row(matrix_row_t current_matrix[], uint8_t current_row);
+    static void unselect_rows(void);
+    static void select_row(uint8_t row);
+    static void unselect_row(uint8_t row);
+#elif (DIODE_DIRECTION == ROW2COL)
+    static void init_rows(void);
+    static bool read_rows_on_col(matrix_row_t current_matrix[], uint8_t current_col);
+    static void unselect_cols(void);
+    static void unselect_col(uint8_t col);
+    static void select_col(uint8_t col);
+#endif
+__attribute__ ((weak))
+void matrix_init_quantum(void) {
+    matrix_init_kb();
+}
+
+__attribute__ ((weak))
+void matrix_scan_quantum(void) {
+    matrix_scan_kb();
+}
+
+__attribute__ ((weak))
+void matrix_init_kb(void) {
+    matrix_init_user();
+}
+
+__attribute__ ((weak))
+void matrix_scan_kb(void) {
+    matrix_scan_user();
+}
+
+__attribute__ ((weak))
+void matrix_init_user(void) {
+}
+
+__attribute__ ((weak))
+void matrix_scan_user(void) {
+}
+
+inline
+uint8_t matrix_rows(void)
+{
+    return MATRIX_ROWS;
+}
+
+inline
+uint8_t matrix_cols(void)
+{
+    return MATRIX_COLS;
+}
+
+void matrix_init(void)
+{
+    debug_enable = true;
+    debug_matrix = true;
+    debug_mouse = true;
+    // initialize row and col
+#if (DIODE_DIRECTION == COL2ROW)
+    unselect_rows();
+    init_cols();
+#elif (DIODE_DIRECTION == ROW2COL)
+    unselect_cols();
+    init_rows();
+#endif
+
+    TX_RX_LED_INIT;
+
+    // initialize matrix state: all keys off
+    for (uint8_t i=0; i < MATRIX_ROWS; i++) {
+        matrix[i] = 0;
+        matrix_debouncing[i] = 0;
+    }
+
+    matrix_init_quantum();
+
+}
+
+uint8_t _matrix_scan(void)
+{
+    int offset = isLeftHand ? 0 : (ROWS_PER_HAND);
+#if (DIODE_DIRECTION == COL2ROW)
+    // Set row, read cols
+    for (uint8_t current_row = 0; current_row < ROWS_PER_HAND; current_row++) {
+#       if (DEBOUNCING_DELAY > 0)
+            bool matrix_changed = read_cols_on_row(matrix_debouncing+offset, current_row);
+
+            if (matrix_changed) {
+                debouncing = true;
+                debouncing_time = timer_read();
+                PORTD ^= (1 << 2);
+            }
+
+#       else
+            read_cols_on_row(matrix+offset, current_row);
+#       endif
+
+    }
+
+#elif (DIODE_DIRECTION == ROW2COL)
+    // Set col, read rows
+    for (uint8_t current_col = 0; current_col < MATRIX_COLS; current_col++) {
+#       if (DEBOUNCING_DELAY > 0)
+            bool matrix_changed = read_rows_on_col(matrix_debouncing+offset, current_col);
+            if (matrix_changed) {
+                debouncing = true;
+                debouncing_time = timer_read();
+            }
+#       else
+             read_rows_on_col(matrix+offset, current_col);
+#       endif
+
+    }
+#endif
+
+#   if (DEBOUNCING_DELAY > 0)
+        if (debouncing && (timer_elapsed(debouncing_time) > DEBOUNCING_DELAY)) {
+            for (uint8_t i = 0; i < ROWS_PER_HAND; i++) {
+                matrix[i+offset] = matrix_debouncing[i+offset];
+            }
+            debouncing = false;
+        }
+#   endif
+
+    return 1;
+}
+
+#ifdef USE_I2C
+
+// Get rows from other half over i2c
+int i2c_transaction(void) {
+    int slaveOffset = (isLeftHand) ? (ROWS_PER_HAND) : 0;
+
+    int err = i2c_master_start(SLAVE_I2C_ADDRESS + I2C_WRITE);
+    if (err) goto i2c_error;
+
+    // start of matrix stored at 0x00
+    err = i2c_master_write(0x00);
+    if (err) goto i2c_error;
+
+    // Start read
+    err = i2c_master_start(SLAVE_I2C_ADDRESS + I2C_READ);
+    if (err) goto i2c_error;
+
+    if (!err) {
+        int i;
+        for (i = 0; i < ROWS_PER_HAND-1; ++i) {
+            matrix[slaveOffset+i] = i2c_master_read(I2C_ACK);
+        }
+        matrix[slaveOffset+i] = i2c_master_read(I2C_NACK);
+        i2c_master_stop();
+    } else {
+i2c_error: // the cable is disconnceted, or something else went wrong
+        i2c_reset_state();
+        return err;
+    }
+
+    return 0;
+}
+
+#else // USE_SERIAL
+
+int serial_transaction(void) {
+    int slaveOffset = (isLeftHand) ? (ROWS_PER_HAND) : 0;
+
+    if (serial_update_buffers()) {
+        return 1;
+    }
+
+    for (int i = 0; i < ROWS_PER_HAND; ++i) {
+        matrix[slaveOffset+i] = serial_slave_buffer[i];
+    }
+    return 0;
+}
+#endif
+
+uint8_t matrix_scan(void)
+{
+    uint8_t ret = _matrix_scan();
+
+#ifdef USE_I2C
+    if( i2c_transaction() ) {
+#else // USE_SERIAL
+    if( serial_transaction() ) {
+#endif
+        // turn on the indicator led when halves are disconnected
+        TXLED1;
+
+        error_count++;
+
+        if (error_count > ERROR_DISCONNECT_COUNT) {
+            // reset other half if disconnected
+            int slaveOffset = (isLeftHand) ? (ROWS_PER_HAND) : 0;
+            for (int i = 0; i < ROWS_PER_HAND; ++i) {
+                matrix[slaveOffset+i] = 0;
+            }
+        }
+    } else {
+        // turn off the indicator led on no error
+        TXLED0;
+        error_count = 0;
+    }
+    matrix_scan_quantum();
+    return ret;
+}
+
+void matrix_slave_scan(void) {
+    _matrix_scan();
+
+    int offset = (isLeftHand) ? 0 : ROWS_PER_HAND;
+
+#ifdef USE_I2C
+    for (int i = 0; i < ROWS_PER_HAND; ++i) {
+        i2c_slave_buffer[i] = matrix[offset+i];
+    }
+#else // USE_SERIAL
+    for (int i = 0; i < ROWS_PER_HAND; ++i) {
+        serial_slave_buffer[i] = matrix[offset+i];
+    }
+#endif
+}
+
+bool matrix_is_modified(void)
+{
+    if (debouncing) return false;
+    return true;
+}
+
+inline
+bool matrix_is_on(uint8_t row, uint8_t col)
+{
+    return (matrix[row] & ((matrix_row_t)1<<col));
+}
+
+inline
+matrix_row_t matrix_get_row(uint8_t row)
+{
+    return matrix[row];
+}
+
+void matrix_print(void)
+{
+    print("\nr/c 0123456789ABCDEF\n");
+    for (uint8_t row = 0; row < MATRIX_ROWS; row++) {
+        phex(row); print(": ");
+        pbin_reverse16(matrix_get_row(row));
+        print("\n");
+    }
+}
+
+uint8_t matrix_key_count(void)
+{
+    uint8_t count = 0;
+    for (uint8_t i = 0; i < MATRIX_ROWS; i++) {
+        count += bitpop16(matrix[i]);
+    }
+    return count;
+}
+
+#if (DIODE_DIRECTION == COL2ROW)
+
+static void init_cols(void)
+{
+    for(uint8_t x = 0; x < MATRIX_COLS; x++) {
+        uint8_t pin = col_pins[x];
+        _SFR_IO8((pin >> 4) + 1) &= ~_BV(pin & 0xF); // IN
+        _SFR_IO8((pin >> 4) + 2) |=  _BV(pin & 0xF); // HI
+    }
+}
+
+static bool read_cols_on_row(matrix_row_t current_matrix[], uint8_t current_row)
+{
+    // Store last value of row prior to reading
+    matrix_row_t last_row_value = current_matrix[current_row];
+
+    // Clear data in matrix row
+    current_matrix[current_row] = 0;
+
+    // Select row and wait for row selecton to stabilize
+    select_row(current_row);
+    wait_us(30);
+
+    // For each col...
+    for(uint8_t col_index = 0; col_index < MATRIX_COLS; col_index++) {
+
+        // Select the col pin to read (active low)
+        uint8_t pin = col_pins[col_index];
+        uint8_t pin_state = (_SFR_IO8(pin >> 4) & _BV(pin & 0xF));
+
+        // Populate the matrix row with the state of the col pin
+        current_matrix[current_row] |=  pin_state ? 0 : (ROW_SHIFTER << col_index);
+    }
+
+    // Unselect row
+    unselect_row(current_row);
+
+    return (last_row_value != current_matrix[current_row]);
+}
+
+static void select_row(uint8_t row)
+{
+    uint8_t pin = row_pins[row];
+    _SFR_IO8((pin >> 4) + 1) |=  _BV(pin & 0xF); // OUT
+    _SFR_IO8((pin >> 4) + 2) &= ~_BV(pin & 0xF); // LOW
+}
+
+static void unselect_row(uint8_t row)
+{
+    uint8_t pin = row_pins[row];
+    _SFR_IO8((pin >> 4) + 1) &= ~_BV(pin & 0xF); // IN
+    _SFR_IO8((pin >> 4) + 2) |=  _BV(pin & 0xF); // HI
+}
+
+static void unselect_rows(void)
+{
+    for(uint8_t x = 0; x < ROWS_PER_HAND; x++) {
+        uint8_t pin = row_pins[x];
+        _SFR_IO8((pin >> 4) + 1) &= ~_BV(pin & 0xF); // IN
+        _SFR_IO8((pin >> 4) + 2) |=  _BV(pin & 0xF); // HI
+    }
+}
+
+#elif (DIODE_DIRECTION == ROW2COL)
+
+static void init_rows(void)
+{
+    for(uint8_t x = 0; x < ROWS_PER_HAND; x++) {
+        uint8_t pin = row_pins[x];
+        _SFR_IO8((pin >> 4) + 1) &= ~_BV(pin & 0xF); // IN
+        _SFR_IO8((pin >> 4) + 2) |=  _BV(pin & 0xF); // HI
+    }
+}
+
+static bool read_rows_on_col(matrix_row_t current_matrix[], uint8_t current_col)
+{
+    bool matrix_changed = false;
+
+    // Select col and wait for col selecton to stabilize
+    select_col(current_col);
+    wait_us(30);
+
+    // For each row...
+    for(uint8_t row_index = 0; row_index < ROWS_PER_HAND; row_index++)
+    {
+
+        // Store last value of row prior to reading
+        matrix_row_t last_row_value = current_matrix[row_index];
+
+        // Check row pin state
+        if ((_SFR_IO8(row_pins[row_index] >> 4) & _BV(row_pins[row_index] & 0xF)) == 0)
+        {
+            // Pin LO, set col bit
+            current_matrix[row_index] |= (ROW_SHIFTER << current_col);
+        }
+        else
+        {
+            // Pin HI, clear col bit
+            current_matrix[row_index] &= ~(ROW_SHIFTER << current_col);
+        }
+
+        // Determine if the matrix changed state
+        if ((last_row_value != current_matrix[row_index]) && !(matrix_changed))
+        {
+            matrix_changed = true;
+        }
+    }
+
+    // Unselect col
+    unselect_col(current_col);
+
+    return matrix_changed;
+}
+
+static void select_col(uint8_t col)
+{
+    uint8_t pin = col_pins[col];
+    _SFR_IO8((pin >> 4) + 1) |=  _BV(pin & 0xF); // OUT
+    _SFR_IO8((pin >> 4) + 2) &= ~_BV(pin & 0xF); // LOW
+}
+
+static void unselect_col(uint8_t col)
+{
+    uint8_t pin = col_pins[col];
+    _SFR_IO8((pin >> 4) + 1) &= ~_BV(pin & 0xF); // IN
+    _SFR_IO8((pin >> 4) + 2) |=  _BV(pin & 0xF); // HI
+}
+
+static void unselect_cols(void)
+{
+    for(uint8_t x = 0; x < MATRIX_COLS; x++) {
+        uint8_t pin = col_pins[x];
+        _SFR_IO8((pin >> 4) + 1) &= ~_BV(pin & 0xF); // IN
+        _SFR_IO8((pin >> 4) + 2) |=  _BV(pin & 0xF); // HI
+    }
+}
+
+#endif

keyboards/ergo42/readme.md

@@ -0,0 +1,16 @@
+# Ergo42
+
+![Ergo42](https://raw.githubusercontent.com/Biacco42/Ergo42/readme/readme_image/ergo42_image.jpg)
+
+__The Answer to the Ultimate Question of Life, the Universe, and at least Keyboards.__  
+A split 7x4 ortholinear keyboard. [Hardware project repo](https://github.com/Biacco42/Ergo42)
+
+Keyboard Maintainer: [Biacco42](https://github.com/Biacco42) [@Biacco42](https://twitter.com/Biacco42)  
+Hardware Supported: Ergo42 PCB, Pro Micro ATmega32u4  
+Hardware Availability: [Ergo42 PCB and case](https://github.com/Biacco42/Ergo42)
+
+Make example for this keyboard (after setting up your build environment):
+
+    make ergo42/rev1:default:avrdude
+
+See [build environment setup](https://docs.qmk.fm/build_environment_setup.html) then the [make instructions](https://docs.qmk.fm/make_instructions.html) for more information.

keyboards/ergo42/rev1/config.h

@@ -0,0 +1,93 @@
+/*
+Copyright 2012 Jun Wako <wakojun@gmail.com>
+Copyright 2015 Jack Humbert
+Copyright 2017 Biacco42
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#ifndef REV1_CONFIG_H
+#define REV1_CONFIG_H
+
+#include "config_common.h"
+
+/* USB Device descriptor parameter */
+#define VENDOR_ID       0xBC42
+#define PRODUCT_ID      0x0042
+#define DEVICE_VER      0x0100
+#define MANUFACTURER    Biacco42
+#define PRODUCT         Ergo42
+#define DESCRIPTION     The Answer to the Ultimate Question of Life, the Universe, and at least Keyboards
+
+/* key matrix size */
+// Rows are doubled-up
+#define MATRIX_ROWS 8
+#define MATRIX_COLS 7
+
+// wiring of each half
+#define MATRIX_ROW_PINS { D7, E6, B4, B5 }
+#define MATRIX_COL_PINS { F5, F6, F7, B1, B3, B2, B6 }
+// #define MATRIX_COL_PINS { B6, B2, B3, B1, F7, F6 } //uncomment this line and comment line above if you need to reverse left-to-right key order
+
+#define CATERINA_BOOTLOADER
+
+/* define tapping term */
+#define TAPPING_TERM 120
+
+/* define if matrix has ghost */
+//#define MATRIX_HAS_GHOST
+
+/* number of backlight levels */
+// #define BACKLIGHT_LEVELS 3
+
+/* Set 0 if debouncing isn't needed */
+#define DEBOUNCING_DELAY 5
+
+/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
+#define LOCKING_SUPPORT_ENABLE
+/* Locking resynchronize hack */
+#define LOCKING_RESYNC_ENABLE
+
+/* key combination for command */
+#define IS_COMMAND() ( \
+    keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
+)
+
+/* ws2812 RGB LED */
+#define RGB_DI_PIN D3
+#define RGBLIGHT_TIMER
+#define RGBLED_NUM 12    // Number of LEDs
+#define ws2812_PORTREG  PORTD
+#define ws2812_DDRREG   DDRD
+
+/*
+ * Feature disable options
+ *  These options are also useful to firmware size reduction.
+ */
+
+/* disable debug print */
+// #define NO_DEBUG
+
+/* disable print */
+// #define NO_PRINT
+
+/* disable action features */
+//#define NO_ACTION_LAYER
+//#define NO_ACTION_TAPPING
+//#define NO_ACTION_ONESHOT
+//#define NO_ACTION_MACRO
+//#define NO_ACTION_FUNCTION
+
+
+#endif

keyboards/ergo42/rev1/rev1.c

@@ -0,0 +1,39 @@
+#include "ergo42.h"
+
+#ifdef AUDIO_ENABLE
+    float tone_startup[][2] = SONG(STARTUP_SOUND);
+    float tone_goodbye[][2] = SONG(GOODBYE_SOUND);
+#endif
+
+#ifdef SSD1306OLED
+void led_set_kb(uint8_t usb_led) {
+    // put your keyboard LED indicator (ex: Caps Lock LED) toggling code here
+    led_set_user(usb_led);
+}
+#endif
+
+void matrix_init_kb(void) {
+
+    #ifdef AUDIO_ENABLE
+        _delay_ms(20); // gets rid of tick
+        PLAY_SONG(tone_startup);
+    #endif
+
+    // // green led on
+    // DDRD |= (1<<5);
+    // PORTD &= ~(1<<5);
+
+    // // orange led on
+    // DDRB |= (1<<0);
+    // PORTB &= ~(1<<0);
+
+	matrix_init_user();
+};
+
+void shutdown_user(void) {
+    #ifdef AUDIO_ENABLE
+        PLAY_SONG(tone_goodbye);
+	_delay_ms(150);
+	stop_all_notes();
+    #endif
+}

keyboards/ergo42/rev1/rev1.h

@@ -0,0 +1,62 @@
+#ifndef REV1_H
+#define REV1_H
+
+#include "ergo42.h"
+
+//void promicro_bootloader_jmp(bool program);
+#include "quantum.h"
+
+
+#ifdef USE_I2C
+#include <stddef.h>
+#ifdef __AVR__
+	#include <avr/io.h>
+	#include <avr/interrupt.h>
+#endif
+#endif
+
+//void promicro_bootloader_jmp(bool program);
+
+#ifndef FLIP_HALF
+// Standard Keymap
+// (TRRS jack on the left half is to the right, TRRS jack on the right half is to the left)
+#define KEYMAP( \
+	L00, L01, L02, L03, L04, L05, L06, R00, R01, R02, R03, R04, R05, R06, \
+	L10, L11, L12, L13, L14, L15, L16, R10, R11, R12, R13, R14, R15, R16, \
+	L20, L21, L22, L23, L24, L25, L26, R20, R21, R22, R23, R24, R25, R26, \
+	L30, L31, L32, L33, L34, L35, L36, R30, R31, R32, R33, R34, R35, R36 \
+	) \
+	{ \
+		{ L00, L01, L02, L03, L04, L05, L06 }, \
+		{ L10, L11, L12, L13, L14, L15, L16 }, \
+		{ L20, L21, L22, L23, L24, L25, L26 }, \
+		{ L30, L31, L32, L33, L34, L35, L36 }, \
+		{ R06, R05, R04, R03, R02, R01, R00 }, \
+		{ R16, R15, R14, R13, R12, R11, R10 }, \
+		{ R26, R25, R24, R23, R22, R21, R20 }, \
+		{ R36, R35, R34, R33, R32, R31, R30 } \
+	}
+#else
+// Keymap with right side flipped
+// (TRRS jack on both halves are to the right)
+#define KEYMAP( \
+	L00, L01, L02, L03, L04, L05, L06, R00, R01, R02, R03, R04, R05, R06, \
+	L10, L11, L12, L13, L14, L15, L16, R10, R11, R12, R13, R14, R15, R16, \
+	L20, L21, L22, L23, L24, L25, L26, R20, R21, R22, R23, R24, R25, R26, \
+	L30, L31, L32, L33, L34, L35, L36, R30, R31, R32, R33, R34, R35, R36 \
+	) \
+	{ \
+		{ L00, L01, L02, L03, L04, L05, L06 }, \
+		{ L10, L11, L12, L13, L14, L15, L16 }, \
+		{ L20, L21, L22, L23, L24, L25, L26 }, \
+		{ L30, L31, L32, L33, L34, L35, L36 }, \
+		{ R00, R01, R02, R03, R04, R05, R06 }, \
+		{ R10, R11, R12, R13, R14, R15, R16 }, \
+		{ R20, R21, R22, R23, R24, R25, R26 }, \
+		{ R30, R31, R32, R33, R34, R35, R36 } \
+	}
+#endif
+
+#define LAYOUT_ortho_4x14 KEYMAP
+
+#endif

keyboards/ergo42/rev1/rules.mk

@@ -0,0 +1 @@
+BACKLIGHT_ENABLE = no

keyboards/ergo42/rules.mk

@@ -0,0 +1,80 @@
+SRC += matrix.c \
+	   i2c.c \
+	   split_util.c \
+	   serial.c \
+	   ssd1306.c
+
+# MCU name
+#MCU = at90usb1287
+MCU = atmega32u4
+
+# Processor frequency.
+#     This will define a symbol, F_CPU, in all source code files equal to the
+#     processor frequency in Hz. You can then use this symbol in your source code to
+#     calculate timings. Do NOT tack on a 'UL' at the end, this will be done
+#     automatically to create a 32-bit value in your source code.
+#
+#     This will be an integer division of F_USB below, as it is sourced by
+#     F_USB after it has run through any CPU prescalers. Note that this value
+#     does not *change* the processor frequency - it should merely be updated to
+#     reflect the processor speed set externally so that the code can use accurate
+#     software delays.
+F_CPU = 16000000
+
+#
+# LUFA specific
+#
+# Target architecture (see library "Board Types" documentation).
+ARCH = AVR8
+
+# Input clock frequency.
+#     This will define a symbol, F_USB, in all source code files equal to the
+#     input clock frequency (before any prescaling is performed) in Hz. This value may
+#     differ from F_CPU if prescaling is used on the latter, and is required as the
+#     raw input clock is fed directly to the PLL sections of the AVR for high speed
+#     clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
+#     at the end, this will be done automatically to create a 32-bit value in your
+#     source code.
+#
+#     If no clock division is performed on the input clock inside the AVR (via the
+#     CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
+F_USB = $(F_CPU)
+
+# Interrupt driven control endpoint task(+60)
+OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
+
+
+# Boot Section Size in *bytes*
+#   Teensy halfKay   512
+#   Teensy++ halfKay 1024
+#   Atmel DFU loader 4096
+#   LUFA bootloader  4096
+#   USBaspLoader     2048
+OPT_DEFS += -DBOOTLOADER_SIZE=4096
+
+# Build Options
+#   change to "no" to disable the options, or define them in the Makefile in
+#   the appropriate keymap folder that will get included automatically
+#
+BOOTMAGIC_ENABLE = no       # Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE = yes       # Mouse keys(+4700)
+EXTRAKEY_ENABLE = yes       # Audio control and System control(+450)
+CONSOLE_ENABLE = no         # Console for debug(+400)
+COMMAND_ENABLE = yes        # Commands for debug and configuration
+NKRO_ENABLE = no            # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+BACKLIGHT_ENABLE = no      # Enable keyboard backlight functionality
+MIDI_ENABLE = no            # MIDI controls
+AUDIO_ENABLE = no           # Audio output on port C6
+UNICODE_ENABLE = no         # Unicode
+BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
+RGBLIGHT_ENABLE = no       # Enable WS2812 RGB underlight.  Do not enable this with audio at the same time.
+SUBPROJECT_rev1 = yes
+USE_I2C = yes
+# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
+SLEEP_LED_ENABLE = no    # Breathing sleep LED during USB suspend
+
+CUSTOM_MATRIX = yes
+
+LAYOUTS = ortho_4x14
+
+DEFAULT_FOLDER = ergo42/rev1

keyboards/ergo42/serial.c

@@ -0,0 +1,228 @@
+/*
+ * WARNING: be careful changing this code, it is very timing dependent
+ */
+
+#ifndef F_CPU
+#define F_CPU 16000000
+#endif
+
+#include <avr/io.h>
+#include <avr/interrupt.h>
+#include <util/delay.h>
+#include <stdbool.h>
+#include "serial.h"
+
+#ifndef USE_I2C
+
+// Serial pulse period in microseconds. Its probably a bad idea to lower this
+// value.
+#define SERIAL_DELAY 24
+
+uint8_t volatile serial_slave_buffer[SERIAL_SLAVE_BUFFER_LENGTH] = {0};
+uint8_t volatile serial_master_buffer[SERIAL_MASTER_BUFFER_LENGTH] = {0};
+
+#define SLAVE_DATA_CORRUPT (1<<0)
+volatile uint8_t status = 0;
+
+inline static
+void serial_delay(void) {
+  _delay_us(SERIAL_DELAY);
+}
+
+inline static
+void serial_output(void) {
+  SERIAL_PIN_DDR |= SERIAL_PIN_MASK;
+}
+
+// make the serial pin an input with pull-up resistor
+inline static
+void serial_input(void) {
+  SERIAL_PIN_DDR  &= ~SERIAL_PIN_MASK;
+  SERIAL_PIN_PORT |= SERIAL_PIN_MASK;
+}
+
+inline static
+uint8_t serial_read_pin(void) {
+  return !!(SERIAL_PIN_INPUT & SERIAL_PIN_MASK);
+}
+
+inline static
+void serial_low(void) {
+  SERIAL_PIN_PORT &= ~SERIAL_PIN_MASK;
+}
+
+inline static
+void serial_high(void) {
+  SERIAL_PIN_PORT |= SERIAL_PIN_MASK;
+}
+
+void serial_master_init(void) {
+  serial_output();
+  serial_high();
+}
+
+void serial_slave_init(void) {
+  serial_input();
+
+  // Enable INT0
+  EIMSK |= _BV(INT0);
+  // Trigger on falling edge of INT0
+  EICRA &= ~(_BV(ISC00) | _BV(ISC01));
+}
+
+// Used by the master to synchronize timing with the slave.
+static
+void sync_recv(void) {
+  serial_input();
+  // This shouldn't hang if the slave disconnects because the
+  // serial line will float to high if the slave does disconnect.
+  while (!serial_read_pin());
+  serial_delay();
+}
+
+// Used by the slave to send a synchronization signal to the master.
+static
+void sync_send(void) {
+  serial_output();
+
+  serial_low();
+  serial_delay();
+
+  serial_high();
+}
+
+// Reads a byte from the serial line
+static
+uint8_t serial_read_byte(void) {
+  uint8_t byte = 0;
+  serial_input();
+  for ( uint8_t i = 0; i < 8; ++i) {
+    byte = (byte << 1) | serial_read_pin();
+    serial_delay();
+    _delay_us(1);
+  }
+
+  return byte;
+}
+
+// Sends a byte with MSB ordering
+static
+void serial_write_byte(uint8_t data) {
+  uint8_t b = 8;
+  serial_output();
+  while( b-- ) {
+    if(data & (1 << b)) {
+      serial_high();
+    } else {
+      serial_low();
+    }
+    serial_delay();
+  }
+}
+
+// interrupt handle to be used by the slave device
+ISR(SERIAL_PIN_INTERRUPT) {
+  sync_send();
+
+  uint8_t checksum = 0;
+  for (int i = 0; i < SERIAL_SLAVE_BUFFER_LENGTH; ++i) {
+    serial_write_byte(serial_slave_buffer[i]);
+    sync_send();
+    checksum += serial_slave_buffer[i];
+  }
+  serial_write_byte(checksum);
+  sync_send();
+
+  // wait for the sync to finish sending
+  serial_delay();
+
+  // read the middle of pulses
+  _delay_us(SERIAL_DELAY/2);
+
+  uint8_t checksum_computed = 0;
+  for (int i = 0; i < SERIAL_MASTER_BUFFER_LENGTH; ++i) {
+    serial_master_buffer[i] = serial_read_byte();
+    sync_send();
+    checksum_computed += serial_master_buffer[i];
+  }
+  uint8_t checksum_received = serial_read_byte();
+  sync_send();
+
+  serial_input(); // end transaction
+
+  if ( checksum_computed != checksum_received ) {
+    status |= SLAVE_DATA_CORRUPT;
+  } else {
+    status &= ~SLAVE_DATA_CORRUPT;
+  }
+}
+
+inline
+bool serial_slave_DATA_CORRUPT(void) {
+  return status & SLAVE_DATA_CORRUPT;
+}
+
+// Copies the serial_slave_buffer to the master and sends the
+// serial_master_buffer to the slave.
+//
+// Returns:
+// 0 => no error
+// 1 => slave did not respond
+int serial_update_buffers(void) {
+  // this code is very time dependent, so we need to disable interrupts
+  cli();
+
+  // signal to the slave that we want to start a transaction
+  serial_output();
+  serial_low();
+  _delay_us(1);
+
+  // wait for the slaves response
+  serial_input();
+  serial_high();
+  _delay_us(SERIAL_DELAY);
+
+  // check if the slave is present
+  if (serial_read_pin()) {
+    // slave failed to pull the line low, assume not present
+    sei();
+    return 1;
+  }
+
+  // if the slave is present syncronize with it
+  sync_recv();
+
+  uint8_t checksum_computed = 0;
+  // receive data from the slave
+  for (int i = 0; i < SERIAL_SLAVE_BUFFER_LENGTH; ++i) {
+    serial_slave_buffer[i] = serial_read_byte();
+    sync_recv();
+    checksum_computed += serial_slave_buffer[i];
+  }
+  uint8_t checksum_received = serial_read_byte();
+  sync_recv();
+
+  if (checksum_computed != checksum_received) {
+    sei();
+    return 1;
+  }
+
+  uint8_t checksum = 0;
+  // send data to the slave
+  for (int i = 0; i < SERIAL_MASTER_BUFFER_LENGTH; ++i) {
+    serial_write_byte(serial_master_buffer[i]);
+    sync_recv();
+    checksum += serial_master_buffer[i];
+  }
+  serial_write_byte(checksum);
+  sync_recv();
+
+  // always, release the line when not in use
+  serial_output();
+  serial_high();
+
+  sei();
+  return 0;
+}
+
+#endif

keyboards/ergo42/serial.h

@@ -0,0 +1,26 @@
+#ifndef MY_SERIAL_H
+#define MY_SERIAL_H
+
+#include "config.h"
+#include <stdbool.h>
+
+/* TODO:  some defines for interrupt setup */
+#define SERIAL_PIN_DDR DDRD
+#define SERIAL_PIN_PORT PORTD
+#define SERIAL_PIN_INPUT PIND
+#define SERIAL_PIN_MASK _BV(PD0)
+#define SERIAL_PIN_INTERRUPT INT0_vect
+
+#define SERIAL_SLAVE_BUFFER_LENGTH MATRIX_ROWS/2
+#define SERIAL_MASTER_BUFFER_LENGTH 1
+
+// Buffers for master - slave communication
+extern volatile uint8_t serial_slave_buffer[SERIAL_SLAVE_BUFFER_LENGTH];
+extern volatile uint8_t serial_master_buffer[SERIAL_MASTER_BUFFER_LENGTH];
+
+void serial_master_init(void);
+void serial_slave_init(void);
+int serial_update_buffers(void);
+bool serial_slave_data_corrupt(void);
+
+#endif

keyboards/ergo42/split_util.c

@@ -0,0 +1,86 @@
+#include <avr/io.h>
+#include <avr/wdt.h>
+#include <avr/power.h>
+#include <avr/interrupt.h>
+#include <util/delay.h>
+#include <avr/eeprom.h>
+#include "split_util.h"
+#include "matrix.h"
+#include "keyboard.h"
+#include "config.h"
+#include "timer.h"
+
+#ifdef USE_I2C
+#  include "i2c.h"
+#else
+#  include "serial.h"
+#endif
+
+volatile bool isLeftHand = true;
+
+static void setup_handedness(void) {
+  #ifdef EE_HANDS
+    isLeftHand = eeprom_read_byte(EECONFIG_HANDEDNESS);
+  #else
+    // I2C_MASTER_RIGHT is deprecated, use MASTER_RIGHT instead, since this works for both serial and i2c
+    #if defined(I2C_MASTER_RIGHT) || defined(MASTER_RIGHT)
+      isLeftHand = !has_usb();
+    #else
+      isLeftHand = has_usb();
+    #endif
+  #endif
+}
+
+static void keyboard_master_setup(void) {
+#ifdef USE_I2C
+    i2c_master_init();
+#ifdef SSD1306OLED
+    matrix_master_OLED_init ();
+#endif
+#else
+    serial_master_init();
+#endif
+}
+
+static void keyboard_slave_setup(void) {
+  timer_init();
+#ifdef USE_I2C
+    i2c_slave_init(SLAVE_I2C_ADDRESS);
+#else
+    serial_slave_init();
+#endif
+}
+
+bool has_usb(void) {
+   USBCON |= (1 << OTGPADE); //enables VBUS pad
+   _delay_us(5);
+   return (USBSTA & (1<<VBUS));  //checks state of VBUS
+}
+
+void split_keyboard_setup(void) {
+   setup_handedness();
+
+   if (has_usb()) {
+      keyboard_master_setup();
+   } else {
+      keyboard_slave_setup();
+   }
+   sei();
+}
+
+void keyboard_slave_loop(void) {
+   matrix_init();
+
+   while (1) {
+      matrix_slave_scan();
+   }
+}
+
+// this code runs before the usb and keyboard is initialized
+void matrix_setup(void) {
+    split_keyboard_setup();
+
+    if (!has_usb()) {
+        keyboard_slave_loop();
+    }
+}

keyboards/ergo42/split_util.h

@@ -0,0 +1,20 @@
+#ifndef SPLIT_KEYBOARD_UTIL_H
+#define SPLIT_KEYBOARD_UTIL_H
+
+#include <stdbool.h>
+#include "eeconfig.h"
+
+#define SLAVE_I2C_ADDRESS           0x32
+
+extern volatile bool isLeftHand;
+
+// slave version of matix scan, defined in matrix.c
+void matrix_slave_scan(void);
+
+void split_keyboard_setup(void);
+bool has_usb(void);
+void keyboard_slave_loop(void);
+
+void matrix_master_OLED_init (void);
+
+#endif

keyboards/ergodox_ez/keymaps/drashna/keymap.c

@@ -244,9 +244,9 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
                 KC_MAKE,        KC_HASH,    KC_DLR,     KC_LPRN,    KC_RPRN,    KC_GRAVE,
                 KC_RESET,       KC_PERC,    KC_CIRC,    KC_LBRACKET,KC_RBRACKET,KC_TILD,    KC_COLEMAK,
                 KC_TRNS,          KC_AMPR,    KC_ASTR,    KC_COLN,    KC_SCOLON,
-                                                                  KC_TRNS, KC_TRNS,
-                                                                  KC_TRNS,
-                                                                  KC_TRNS, KC_TRNS, KC_TRNS,
+                                                                  RGB_SMOD, KC_RGB_T,
+                                                                  RGB_HUI,
+                                                                  RGB_M_R, RGB_M_SW, RGB_HUD,
                 
                 KC_QWERTY,   KC_F6,      KC_F7,      KC_F8,      KC_F9,      KC_F10,         KC_F11,
                 KC_DVORAK,   KC_KP_PLUS, KC_KP_7,    KC_KP_8,    KC_KP_9,    KC_KP_ASTERISK, KC_F12,

keyboards/handwired/woodpad/keymaps/drashna/keymap.c

@@ -13,7 +13,7 @@
  * You should have received a copy of the GNU General Public License
  * along with this program.  If not, see <http://www.gnu.org/licenses/>.
  */
-#include "woodpad.h"
+#include QMK_KEYBOARD_H
 #include "drashna.h"
 
  // Each layer gets a name for readability, which is then used in the keymap matrix below.
@@ -97,12 +97,6 @@ void matrix_init_keymap(void) {
   // set Numlock LED to output and low
   DDRF |= (1 << 7);
   PORTF &= ~(1 << 7);
-
-
-  if (!(host_keyboard_leds() & (1 << USB_LED_NUM_LOCK))) {
-    register_code(KC_NUMLOCK);
-    unregister_code(KC_NUMLOCK);
-  }
 }
 
 void matrix_scan_keymap(void) {
@@ -114,3 +108,9 @@ void matrix_scan_keymap(void) {
   // Run Diablo 3 macro checking code.
 }
 
+void led_set_keymap(uint8_t usb_led) {
+  if (!(usb_led & (1<<USB_LED_NUM_LOCK))) {
+    register_code(KC_NUMLOCK);
+    unregister_code(KC_NUMLOCK);
+  }
+}

keyboards/iris/rev1/rev1.c

@@ -1,9 +1,5 @@
 #include "rev1.h"
 
-#ifdef AUDIO_ENABLE
-    float tone_startup[][2] = SONG(STARTUP_SOUND);
-    float tone_goodbye[][2] = SONG(GOODBYE_SOUND);
-#endif
 
 #ifdef SSD1306OLED
 void led_set_kb(uint8_t usb_led) {
@@ -14,11 +10,6 @@ void led_set_kb(uint8_t usb_led) {
 
 void matrix_init_kb(void) {
 
-    #ifdef AUDIO_ENABLE
-        _delay_ms(20); // gets rid of tick
-        PLAY_SONG(tone_startup);
-    #endif
-
     // // green led on
     // DDRD |= (1<<5);
     // PORTD &= ~(1<<5);
@@ -29,11 +20,3 @@ void matrix_init_kb(void) {
 
 	matrix_init_user();
 };
-
-void shutdown_user(void) {
-    #ifdef AUDIO_ENABLE
-        PLAY_SONG(tone_goodbye);
-	_delay_ms(150);
-	stop_all_notes();
-    #endif
-}

keyboards/iris/rev2/rev2.c

@@ -1,10 +1,5 @@
 #include "rev2.h"
 
-#ifdef AUDIO_ENABLE
-    float tone_startup[][2] = SONG(STARTUP_SOUND);
-    float tone_goodbye[][2] = SONG(GOODBYE_SOUND);
-#endif
-
 #ifdef SSD1306OLED
 void led_set_kb(uint8_t usb_led) {
     // put your keyboard LED indicator (ex: Caps Lock LED) toggling code here
@@ -14,11 +9,6 @@ void led_set_kb(uint8_t usb_led) {
 
 void matrix_init_kb(void) {
 
-    #ifdef AUDIO_ENABLE
-        _delay_ms(20); // gets rid of tick
-        PLAY_SONG(tone_startup);
-    #endif
-
     // // green led on
     // DDRD |= (1<<5);
     // PORTD &= ~(1<<5);
@@ -30,10 +20,3 @@ void matrix_init_kb(void) {
 	matrix_init_user();
 };
 
-void shutdown_user(void) {
-    #ifdef AUDIO_ENABLE
-        PLAY_SONG(tone_goodbye);
-	_delay_ms(150);
-	stop_all_notes();
-    #endif
-}

keyboards/katana60/config.h

@@ -0,0 +1,193 @@
+/*
+Copyright 2017 Baris Tosun
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#ifndef CONFIG_H
+#define CONFIG_H
+
+#include "config_common.h"
+
+/* USB Device descriptor parameter */
+#define VENDOR_ID       0xFEED
+#define PRODUCT_ID      0x6060
+#define DEVICE_VER      0x0001
+#define MANUFACTURER    RominRonin CandyKeys
+#define PRODUCT         Katana60
+#define DESCRIPTION     QMK keyboard firmware for Katana60
+
+/* key matrix size */
+#define MATRIX_ROWS 5
+#define MATRIX_COLS 15
+
+/*
+ * Keyboard Matrix Assignments
+ *
+ * Change this to how you wired your keyboard
+ * COLS: AVR pins used for columns, left to right
+ * ROWS: AVR pins used for rows, top to bottom
+ * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
+ *                  ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
+ *
+*/
+#define MATRIX_ROW_PINS { F5, F6, F4, F1, D0 }
+#define MATRIX_COL_PINS { B7, B3, B2, B1, B0, C7, D1, D2, C6, B6, B5, B4, D4, D6, D7 }
+#define UNUSED_PINS
+
+/* COL2ROW, ROW2COL, or CUSTOM_MATRIX */
+#define DIODE_DIRECTION ROW2COL
+ 
+// #define BACKLIGHT_PIN B7
+// #define BACKLIGHT_BREATHING
+// #define BACKLIGHT_LEVELS 3
+
+
+/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
+#define DEBOUNCING_DELAY 5
+
+/* define if matrix has ghost (lacks anti-ghosting diodes) */
+//#define MATRIX_HAS_GHOST
+
+/* number of backlight levels */
+
+/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
+#define LOCKING_SUPPORT_ENABLE
+/* Locking resynchronize hack */
+#define LOCKING_RESYNC_ENABLE
+
+/* If defined, GRAVE_ESC will always act as ESC when CTRL is held.
+ * This is userful for the Windows task manager shortcut (ctrl+shift+esc).
+ */
+// #define GRAVE_ESC_CTRL_OVERRIDE
+
+/*
+ * Force NKRO
+ *
+ * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
+ * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
+ * makefile for this to work.)
+ *
+ * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
+ * until the next keyboard reset.
+ *
+ * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
+ * fully operational during normal computer usage.
+ *
+ * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
+ * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
+ * bootmagic, NKRO mode will always be enabled until it is toggled again during a
+ * power-up.
+ *
+ */
+//#define FORCE_NKRO
+
+/*
+ * Magic Key Options
+ *
+ * Magic keys are hotkey commands that allow control over firmware functions of
+ * the keyboard. They are best used in combination with the HID Listen program,
+ * found here: https://www.pjrc.com/teensy/hid_listen.html
+ *
+ * The options below allow the magic key functionality to be changed. This is
+ * useful if your keyboard/keypad is missing keys and you want magic key support.
+ *
+ */
+
+/* key combination for magic key command */
+#define IS_COMMAND() ( \
+    keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
+)
+
+#define TAPPING_TERM 200
+#define PREVENT_STUCK_MODIFIERS
+
+/* control how magic key switches layers */
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS  true
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS  true
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false
+
+/* override magic key keymap */
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM
+//#define MAGIC_KEY_HELP1          H
+//#define MAGIC_KEY_HELP2          SLASH
+//#define MAGIC_KEY_DEBUG          D
+//#define MAGIC_KEY_DEBUG_MATRIX   X
+//#define MAGIC_KEY_DEBUG_KBD      K
+//#define MAGIC_KEY_DEBUG_MOUSE    M
+//#define MAGIC_KEY_VERSION        V
+//#define MAGIC_KEY_STATUS         S
+//#define MAGIC_KEY_CONSOLE        C
+//#define MAGIC_KEY_LAYER0_ALT1    ESC
+//#define MAGIC_KEY_LAYER0_ALT2    GRAVE
+//#define MAGIC_KEY_LAYER0         0
+//#define MAGIC_KEY_LAYER1         1
+//#define MAGIC_KEY_LAYER2         2
+//#define MAGIC_KEY_LAYER3         3
+//#define MAGIC_KEY_LAYER4         4
+//#define MAGIC_KEY_LAYER5         5
+//#define MAGIC_KEY_LAYER6         6
+//#define MAGIC_KEY_LAYER7         7
+//#define MAGIC_KEY_LAYER8         8
+//#define MAGIC_KEY_LAYER9         9
+//#define MAGIC_KEY_BOOTLOADER     PAUSE
+//#define MAGIC_KEY_LOCK           CAPS
+//#define MAGIC_KEY_EEPROM         E
+//#define MAGIC_KEY_NKRO           N
+//#define MAGIC_KEY_SLEEP_LED      Z
+
+/*
+ * Feature disable options
+ *  These options are also useful to firmware size reduction.
+ */
+
+/* disable debug print */
+//#define NO_DEBUG
+
+/* disable print */
+//#define NO_PRINT
+
+/* disable action features */
+//#define NO_ACTION_LAYER
+//#define NO_ACTION_TAPPING
+//#define NO_ACTION_ONESHOT
+//#define NO_ACTION_MACRO
+//#define NO_ACTION_FUNCTION
+
+/*
+ * MIDI options
+ */
+
+/* Prevent use of disabled MIDI features in the keymap */
+//#define MIDI_ENABLE_STRICT 1
+
+/* enable basic MIDI features:
+   - MIDI notes can be sent when in Music mode is on
+*/
+//#define MIDI_BASIC
+
+/* enable advanced MIDI features:
+   - MIDI notes can be added to the keymap
+   - Octave shift and transpose
+   - Virtual sustain, portamento, and modulation wheel
+   - etc.
+*/
+//#define MIDI_ADVANCED
+
+/* override number of MIDI tone keycodes (each octave adds 12 keycodes and allocates 12 bytes) */
+//#define MIDI_TONE_KEYCODE_OCTAVES 1
+
+#endif

keyboards/katana60/katana60.c

@@ -0,0 +1,43 @@
+/* Copyright 2017 Baris Tosun
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#include "katana60.h"
+
+void matrix_init_kb(void) {
+	// put your keyboard start-up code here
+	// runs once when the firmware starts up
+
+	matrix_init_user();
+}
+
+void matrix_scan_kb(void) {
+	// put your looping keyboard code here
+	// runs every cycle (a lot)
+
+	matrix_scan_user();
+}
+
+bool process_record_kb(uint16_t keycode, keyrecord_t *record) {
+	// put your per-action keyboard code here
+	// runs for every action, just before processing by the firmware
+
+	return process_record_user(keycode, record);
+}
+
+void led_set_kb(uint8_t usb_led) {
+	// put your keyboard LED indicator (ex: Caps Lock LED) toggling code here
+
+	led_set_user(usb_led);
+}

keyboards/katana60/katana60.h

@@ -0,0 +1,40 @@
+/* Copyright 2017 Baris Tosun
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#ifndef KATANA60_H
+#define KATANA60_H
+
+#include "quantum.h"
+
+// This a shortcut to help you visually see your layout.
+// The following is an example using the Planck MIT layout
+// The first section contains all of the arguments
+// The second converts the arguments into a two-dimensional array
+#define KEYMAP( \
+      k40, k41, k42, k43, k44, k45, k46, k47, k48, k49, k4a, k4b, k4c, k4d, k4e, \
+      k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b, k3c, k3d, \
+      k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, k2c, k2d, \
+      k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, k1c, k1d, k1e, \
+      k00, k01, k02, k03, k04, k05, k06,           k09, k0a, k0b, k0c, k0d \
+) \
+{ \
+    { k00, k01, k02, k03, k04, k05, k06, KC_NO, KC_NO, k09, k0a, k0b, k0c, k0d, KC_NO  }, \
+    { k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, k1c, k1d, k1e  }, \
+    { k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, k2c, k2d, KC_NO  }, \
+    { k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b, k3c, k3d, KC_NO  }, \
+    { k40, k41, k42, k43, k44, k45, k46, k47, k48, k49, k4a, k4b, k4c, k4d, k4e  }, \
+}
+
+#endif

keyboards/katana60/keymaps/colemak/config.h

@@ -0,0 +1,24 @@
+/* Copyright 2017 Baris Tosun
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#ifndef CONFIG_USER_H
+#define CONFIG_USER_H
+
+#include "../../config.h"
+
+// place overrides here
+
+#endif

keyboards/katana60/keymaps/colemak/keymap.c

@@ -0,0 +1,106 @@
+/* Copyright 2017 Baris Tosun
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#include "katana60.h"
+
+#define _______ KC_TRNS
+#define XXXXXXX KC_NO
+
+// Windows based definitions.
+#define K_SPCFN LT(SYMB, KC_SPACE) // Tap for space, hold for symbols layer
+#define K_PRVWD LCTL(KC_LEFT)      // Previous word
+#define K_NXTWD LCTL(KC_RIGHT)     // Next word
+#define K_LSTRT KC_HOME            // Start of line
+#define K_LEND  KC_END             // End of line
+#define UNDO    LCTL(KC_Z)         // UNDO
+#define CUT     LCTL(KC_X)         // CUT
+#define COPY    LCTL(KC_C)         // COPY
+#define PASTE   LCTL(KC_V)         // PASTE
+
+
+#define BASE 0 // Default
+#define NUMB 1 // Numbers
+#define SYMB 2 // Symbols
+#define CURS 3 // Text Editing
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+[BASE] = KEYMAP( /* Base */
+  KC_ESC,  KC_GRV,  KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    DF(1),   KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_MINS, KC_PLUS,
+  KC_TAB,  KC_Q,    KC_W,    KC_F,    KC_P,    KC_G,    KC_LBRC,          KC_RBRC, KC_J,    KC_L,    KC_U,    KC_Y,    KC_SCLN, KC_BSPC,
+  MO(3),   KC_A,    KC_R,    KC_S,    KC_T,    KC_D,    KC_HOME,          KC_PGUP, KC_H,    KC_N,    KC_E,    KC_I,    KC_O,    KC_ENT,
+  KC_LSFT, KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_END,  KC_DEL,  KC_PGDN, KC_K,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH, KC_RSFT,
+  MO(2),   KC_LCTL, KC_LGUI, KC_LALT,                   KC_BSPC, KC_ENT,  K_SPCFN,          KC_LEFT, KC_DOWN, KC_UP,   KC_RIGHT,MO(2)
+    ),
+[NUMB] = KEYMAP(
+  _______, _______, _______, _______, _______, _______, _______, DF(0),   KC_PSLS, KC_PAST, KC_PMNS, _______, _______, _______, _______,
+  _______, _______, _______, KC_MS_U, _______, _______, _______,          KC_7,    KC_8,    KC_9,    KC_PPLS, _______, _______, _______,
+  _______, KC_BTN2, KC_MS_L, KC_MS_D, KC_MS_R, _______, _______,          KC_4,    KC_5,    KC_6,    KC_PPLS, _______, _______, _______,
+  _______, _______, KC_ACL0, KC_ACL1, KC_ACL2, _______, _______, _______, KC_1,    KC_2,    KC_3,    KC_PENT, _______, _______, _______,
+  _______, _______, _______, _______,                   KC_BTN1, _______, KC_P0,            KC_PDOT, KC_PENT, _______, _______, _______
+    ),
+[SYMB] = KEYMAP(
+  RESET,   _______, KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   _______, KC_F6,   KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,
+  KC_GRV,  KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    _______,          _______, KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_DEL,
+  _______, KC_EXLM, KC_AT,   KC_HASH, KC_DLR,  KC_PERC, KC_VOLD,          KC_VOLU, KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN, _______,
+  _______, KC_PLUS, KC_MINS, KC_EQL,  KC_LCBR, KC_RCBR, KC_MPRV, KC_MPLY, KC_MNXT, KC_LBRC, KC_RBRC, KC_SCLN, KC_COLN, KC_BSLS, _______,
+  _______, _______, _______, _______,                   KC_DEL,  _______, _______,          _______, _______, _______, _______, _______
+    ),
+[CURS] = KEYMAP(
+  _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
+  _______, _______, KC_WH_U, _______, _______, _______, _______,          _______, _______, K_PRVWD, KC_UP,   K_NXTWD, _______, _______,
+  _______, KC_LCTL, KC_WH_D, KC_LSFT, _______, _______, _______,          _______, KC_BSPC, KC_LEFT, KC_DOWN, KC_RIGHT,KC_DEL,  _______,
+  _______, UNDO,    CUT,     COPY,    PASTE,   _______, _______, _______, _______, _______, K_LSTRT, _______, K_LEND,  _______, _______,
+  _______, _______, _______, _______,                   _______, _______, _______,          _______, _______, _______, _______, _______
+    )
+
+};
+
+
+const uint16_t PROGMEM fn_actions[] = {
+    [0] = ACTION_LAYER_TAP_KEY(CURS, KC_BSPC),
+    [1] = ACTION_LAYER_TAP_KEY(SYMB, KC_SPACE),
+};
+
+const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt)
+{
+  // MACRODOWN only works in this function
+      switch(id) {
+        case 0:
+          if (record->event.pressed) {
+            register_code(KC_RSFT);
+          } else {
+            unregister_code(KC_RSFT);
+          }
+        break;
+      }
+    return MACRO_NONE;
+};
+
+
+void matrix_init_user(void) {
+
+}
+
+void matrix_scan_user(void) {
+
+}
+
+bool process_record_user(uint16_t keycode, keyrecord_t *record) {
+  return true;
+}
+
+void led_set_user(uint8_t usb_led) {
+
+}

keyboards/katana60/keymaps/colemak/readme.md

@@ -0,0 +1,5 @@
+# The colemak keymap for katana60
+
+Same as the default layout, but with default Colemal layout.
+
+# TODO: references to extend layer and symbol layers

keyboards/katana60/keymaps/default/config.h

@@ -0,0 +1,24 @@
+/* Copyright 2017 Baris Tosun
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#ifndef CONFIG_USER_H
+#define CONFIG_USER_H
+
+#include "../../config.h"
+
+// place overrides here
+
+#endif

keyboards/katana60/keymaps/default/keymap.c

@@ -0,0 +1,106 @@
+/* Copyright 2017 Baris Tosun
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#include "katana60.h"
+
+#define _______ KC_TRNS
+#define XXXXXXX KC_NO
+
+// Windows based definitions.
+#define K_SPCFN LT(SYMB, KC_SPACE) // Tap for space, hold for symbols layer
+#define K_PRVWD LCTL(KC_LEFT)      // Previous word
+#define K_NXTWD LCTL(KC_RIGHT)     // Next word
+#define K_LSTRT KC_HOME            // Start of line
+#define K_LEND  KC_END             // End of line
+#define UNDO    LCTL(KC_Z)         // UNDO
+#define CUT     LCTL(KC_X)         // CUT
+#define COPY    LCTL(KC_C)         // COPY
+#define PASTE   LCTL(KC_V)         // PASTE
+
+
+#define BASE 0 // Default
+#define NUMB 1 // Numbers
+#define SYMB 2 // Symbols
+#define CURS 3 // Text Editing
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+[BASE] = KEYMAP( /* Base */
+  KC_ESC,  KC_GRV,  KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    DF(1),   KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_MINS, KC_PLUS,
+  KC_TAB,  KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,    KC_LBRC,          KC_RBRC, KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,    KC_BSPC,
+  MO(3),   KC_A,    KC_S,    KC_D,    KC_F,    KC_G,    KC_HOME,          KC_PGUP, KC_H,    KC_J,    KC_K,    KC_L,    KC_SCLN, KC_ENT,
+  KC_LSFT, KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_END,  KC_DEL,  KC_PGDN, KC_N,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH, KC_RSFT,
+  MO(2),   KC_LCTL, KC_LGUI, KC_LALT,                   KC_BSPC, KC_ENT,  K_SPCFN,          KC_LEFT, KC_DOWN, KC_UP,   KC_RIGHT,MO(2)
+    ),
+[NUMB] = KEYMAP(
+  _______, _______, _______, _______, _______, _______, _______, DF(0),   KC_PSLS, KC_PAST, KC_PMNS, _______, _______, _______, _______,
+  _______, _______, _______, KC_MS_U, _______, _______, _______,          KC_7,    KC_8,    KC_9,    KC_PPLS, _______, _______, _______,
+  _______, KC_BTN2, KC_MS_L, KC_MS_D, KC_MS_R, _______, _______,          KC_4,    KC_5,    KC_6,    KC_PPLS, _______, _______, _______,
+  _______, _______, KC_ACL0, KC_ACL1, KC_ACL2, _______, _______, _______, KC_1,    KC_2,    KC_3,    KC_PENT, _______, _______, _______,
+  _______, _______, _______, _______,                   KC_BTN1, _______, KC_P0,            KC_PDOT, KC_PENT, _______, _______, _______
+    ),
+[SYMB] = KEYMAP(
+  RESET,   _______, KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   _______, KC_F6,   KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,
+  KC_GRV,  KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    _______,          _______, KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_DEL,
+  _______, KC_EXLM, KC_AT,   KC_HASH, KC_DLR,  KC_PERC, KC_VOLD,          KC_VOLU, KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN, _______,
+  _______, KC_PLUS, KC_MINS, KC_EQL,  KC_LCBR, KC_RCBR, KC_MPRV, KC_MPLY, KC_MNXT, KC_LBRC, KC_RBRC, KC_SCLN, KC_COLN, KC_BSLS, _______,
+  _______, _______, _______, _______,                   KC_DEL,  _______, _______,          _______, _______, _______, _______, _______
+    ),
+[CURS] = KEYMAP(
+  _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
+  _______, _______, KC_WH_U, _______, _______, _______, _______,          _______, _______, K_PRVWD, KC_UP,   K_NXTWD, _______, _______,
+  _______, KC_LCTL, KC_WH_D, KC_LSFT, _______, _______, _______,          _______, KC_BSPC, KC_LEFT, KC_DOWN, KC_RIGHT,KC_DEL,  _______,
+  _______, UNDO,    CUT,     COPY,    PASTE,   _______, _______, _______, _______, _______, K_LSTRT, _______, K_LEND,  _______, _______,
+  _______, _______, _______, _______,                   _______, _______, _______,          _______, _______, _______, _______, _______
+    )
+
+};
+
+
+const uint16_t PROGMEM fn_actions[] = {
+    [0] = ACTION_LAYER_TAP_KEY(CURS, KC_BSPC),
+    [1] = ACTION_LAYER_TAP_KEY(SYMB, KC_SPACE),
+};
+
+const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt)
+{
+  // MACRODOWN only works in this function
+      switch(id) {
+        case 0:
+          if (record->event.pressed) {
+            register_code(KC_RSFT);
+          } else {
+            unregister_code(KC_RSFT);
+          }
+        break;
+      }
+    return MACRO_NONE;
+};
+
+
+void matrix_init_user(void) {
+
+}
+
+void matrix_scan_user(void) {
+
+}
+
+bool process_record_user(uint16_t keycode, keyrecord_t *record) {
+  return true;
+}
+
+void led_set_user(uint8_t usb_led) {
+
+}

keyboards/katana60/keymaps/default/readme.md

@@ -0,0 +1,7 @@
+# The default keymap for katana60
+
+This layout takes my own personal layout (in development at the Colemak forum) and remaps the keys and shortcuts for Windows (I'm a MacOS user).  
+The testing was comducted on my Windows gaming PC, though it was not exhaustive, all the many layers and useful navigation shortcuts worked fine.
+
+# TODO: references to extend layer and symbol layers
+# TODO: more information

keyboards/katana60/keymaps/rominronin/config.h

@@ -0,0 +1,24 @@
+/* Copyright 2017 Baris Tosun
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#ifndef CONFIG_USER_H
+#define CONFIG_USER_H
+
+#include "../../config.h"
+
+// place overrides here
+
+#endif

keyboards/katana60/keymaps/rominronin/keymap.c

@@ -0,0 +1,106 @@
+/* Copyright 2017 Baris Tosun
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#include "katana60.h"
+
+#define _______ KC_TRNS
+#define XXXXXXX KC_NO
+
+// MacOS based definitions.
+#define K_SPCFN LT(SYMB, KC_SPACE) // Tap for space, hold for symbols layer
+#define K_PRVWD LALT(KC_LEFT)      // Previous word
+#define K_NXTWD LALT(KC_RIGHT)     // Next word
+#define K_LSTRT LGUI(KC_LEFT)      // Start of line
+#define K_LEND  LGUI(KC_RIGHT)     // End of line
+#define UNDO    LGUI(KC_Z)         // UNDO
+#define CUT     LGUI(KC_X)         // CUT
+#define COPY    LGUI(KC_C)         // COPY
+#define PASTE   LGUI(KC_V)         // PASTE
+
+
+#define BASE 0 // Default
+#define NUMB 1 // Numbers
+#define SYMB 2 // Symbols
+#define CURS 3 // Text Editing
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+[BASE] = KEYMAP( /* Base */
+  KC_ESC,  KC_GRV,  KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    DF(1),   KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_MINS, KC_PLUS,
+  KC_TAB,  KC_Q,    KC_W,    KC_F,    KC_P,    KC_B,    KC_LBRC,          KC_RBRC, KC_J,    KC_L,    KC_U,    KC_Y,    KC_QUOT, KC_BSPC,
+  MO(3),   KC_A,    KC_R,    KC_S,    KC_T,    KC_G,    KC_HOME,          KC_PGUP, KC_M,    KC_N,    KC_E,    KC_I,    KC_O,    KC_ENT,
+  KC_LSFT, KC_Z,    KC_X,    KC_C,    KC_D,    KC_V,    KC_END,  KC_DEL,  KC_PGDN, KC_K,    KC_H,    KC_COMM, KC_DOT,  KC_SLSH, KC_RSFT,
+  MO(2),   KC_LCTL, KC_LALT, KC_LGUI,                   KC_BSPC, KC_ENT,  K_SPCFN,          KC_LEFT, KC_DOWN, KC_UP,   KC_RIGHT,MO(2)
+    ),
+[NUMB] = KEYMAP(
+  _______, _______, _______, _______, _______, _______, _______, DF(0),   KC_PSLS, KC_PAST, KC_PMNS, _______, _______, _______, _______,
+  _______, _______, _______, KC_MS_U, _______, _______, _______,          KC_7,    KC_8,    KC_9,    KC_PPLS, _______, _______, _______,
+  _______, KC_BTN2, KC_MS_L, KC_MS_D, KC_MS_R, _______, _______,          KC_4,    KC_5,    KC_6,    KC_PPLS, _______, _______, _______,
+  _______, _______, KC_ACL0, KC_ACL1, KC_ACL2, _______, _______, _______, KC_1,    KC_2,    KC_3,    KC_PENT, _______, _______, _______,
+  _______, _______, _______, _______,                   KC_BTN1, _______, KC_P0,            KC_PDOT, KC_PENT, _______, _______, _______
+    ),
+[SYMB] = KEYMAP(
+  RESET,   _______, KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   _______, KC_F6,   KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,
+  KC_GRV,  KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    _______,          _______, KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_DEL,
+  _______, KC_EXLM, KC_AT,   KC_HASH, KC_DLR,  KC_PERC, KC_VOLD,          KC_VOLU, KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN, _______,
+  _______, KC_PLUS, KC_MINS, KC_EQL,  KC_LCBR, KC_RCBR, KC_MPRV, KC_MPLY, KC_MNXT, KC_LBRC, KC_RBRC, KC_SCLN, KC_COLN, KC_BSLS, _______,
+  _______, _______, _______, _______,                   KC_DEL,  _______, _______,          _______, _______, _______, _______, _______
+    ),
+[CURS] = KEYMAP(
+  _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
+  _______, _______, KC_WH_U, _______, _______, _______, _______,          _______, _______, K_PRVWD, KC_UP,   K_NXTWD, _______, _______,
+  _______, KC_LCTL, KC_WH_D, KC_LSFT, _______, _______, _______,          _______, KC_BSPC, KC_LEFT, KC_DOWN, KC_RIGHT,KC_DEL,  _______,
+  _______, UNDO,    CUT,     COPY,    PASTE,   _______, _______, _______, _______, _______, K_LSTRT, _______, K_LEND,  _______, _______,
+  _______, _______, _______, _______,                   _______, _______, _______,          _______, _______, _______, _______, _______
+    )
+
+};
+
+
+const uint16_t PROGMEM fn_actions[] = {
+    [0] = ACTION_LAYER_TAP_KEY(CURS, KC_BSPC),
+    [1] = ACTION_LAYER_TAP_KEY(SYMB, KC_SPACE),
+};
+
+const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt)
+{
+  // MACRODOWN only works in this function
+      switch(id) {
+        case 0:
+          if (record->event.pressed) {
+            register_code(KC_RSFT);
+          } else {
+            unregister_code(KC_RSFT);
+          }
+        break;
+      }
+    return MACRO_NONE;
+};
+
+
+void matrix_init_user(void) {
+
+}
+
+void matrix_scan_user(void) {
+
+}
+
+bool process_record_user(uint16_t keycode, keyrecord_t *record) {
+  return true;
+}
+
+void led_set_user(uint8_t usb_led) {
+
+}

keyboards/katana60/keymaps/rominronin/readme.md

@@ -0,0 +1,5 @@
+# RominRonin's keymap for katana60
+
+My own personal daily layout. OS keys are oriented for MacOS and the keys are in COLEMAK Mod-DH layout.
+
+# TODO: references to extend layer and symbol layers

keyboards/katana60/readme.md

@@ -0,0 +1,17 @@
+# Katana60
+
+![Katana60](https://i.imgur.com/xVkODOu.jpg)
+
+A 60% keyboard with a symmetrical staggered layout, sold by CandyKeys.com.
+
+Keyboard Maintainer: [Baris Tosun](https://github.com/rominronin)  
+Hardware Supported: Katana60 PCB v1, Teensy 2.0  
+Hardware Availability: [CandyKeys.com](https://CandyKeys.com)
+
+Make example for this keyboard (after setting up your build environment):
+
+    make katana60:default
+
+See [build environment setup](https://docs.qmk.fm/build_environment_setup.html) then the [make instructions](https://docs.qmk.fm/make_instructions.html) for more information.
+
+There is also ongoing discussion for the extend layer, at the [Colemak Forum](https://forum.colemak.com/topic/2327-developing-an-extend-layer-for-the-katana60/)

keyboards/katana60/rules.mk

@@ -0,0 +1,68 @@
+# MCU name
+#MCU = at90usb1286
+MCU = atmega32u4
+
+# Processor frequency.
+#     This will define a symbol, F_CPU, in all source code files equal to the
+#     processor frequency in Hz. You can then use this symbol in your source code to
+#     calculate timings. Do NOT tack on a 'UL' at the end, this will be done
+#     automatically to create a 32-bit value in your source code.
+#
+#     This will be an integer division of F_USB below, as it is sourced by
+#     F_USB after it has run through any CPU prescalers. Note that this value
+#     does not *change* the processor frequency - it should merely be updated to
+#     reflect the processor speed set externally so that the code can use accurate
+#     software delays.
+F_CPU = 16000000
+
+
+#
+# LUFA specific
+#
+# Target architecture (see library "Board Types" documentation).
+ARCH = AVR8
+
+# Input clock frequency.
+#     This will define a symbol, F_USB, in all source code files equal to the
+#     input clock frequency (before any prescaling is performed) in Hz. This value may
+#     differ from F_CPU if prescaling is used on the latter, and is required as the
+#     raw input clock is fed directly to the PLL sections of the AVR for high speed
+#     clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
+#     at the end, this will be done automatically to create a 32-bit value in your
+#     source code.
+#
+#     If no clock division is performed on the input clock inside the AVR (via the
+#     CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
+F_USB = $(F_CPU)
+
+# Interrupt driven control endpoint task(+60)
+OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
+
+
+# Boot Section Size in *bytes*
+#   Teensy halfKay   512
+#   Teensy++ halfKay 1024
+#   Atmel DFU loader 4096
+#   LUFA bootloader  4096
+#   USBaspLoader     2048
+OPT_DEFS += -DBOOTLOADER_SIZE=512
+
+
+# Build Options
+#   change yes to no to disable
+#
+BOOTMAGIC_ENABLE ?= no      # Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE ?= yes       # Mouse keys(+4700)
+EXTRAKEY_ENABLE ?= yes       # Audio control and System control(+450)
+CONSOLE_ENABLE ?= yes        # Console for debug(+400)
+COMMAND_ENABLE ?= yes        # Commands for debug and configuration
+# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
+SLEEP_LED_ENABLE ?= no       # Breathing sleep LED during USB suspend
+# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+NKRO_ENABLE ?= no            # USB Nkey Rollover
+BACKLIGHT_ENABLE ?= no       # Enable keyboard backlight functionality on B7 by default
+MIDI_ENABLE ?= no            # MIDI support (+2400 to 4200, depending on config)
+UNICODE_ENABLE ?= no         # Unicode
+BLUETOOTH_ENABLE ?= no       # Enable Bluetooth with the Adafruit EZ-Key HID
+AUDIO_ENABLE ?= no           # Audio output on port C6
+FAUXCLICKY_ENABLE ?= no      # Use buzzer to emulate clicky switches

keyboards/lets_split/rev1/rev1.c

@@ -1,17 +1,7 @@
 #include "lets_split.h"
 
-#ifdef AUDIO_ENABLE
-    float tone_startup[][2] = SONG(STARTUP_SOUND);
-    float tone_goodbye[][2] = SONG(GOODBYE_SOUND);
-#endif
-
 void matrix_init_kb(void) {
 
-    #ifdef AUDIO_ENABLE
-        _delay_ms(20); // gets rid of tick
-        PLAY_SONG(tone_startup);
-    #endif
-
     // // green led on
     // DDRD |= (1<<5);
     // PORTD &= ~(1<<5);
@@ -23,10 +13,3 @@ void matrix_init_kb(void) {
 	matrix_init_user();
 };
 
-void shutdown_user(void) {
-    #ifdef AUDIO_ENABLE
-        PLAY_SONG(tone_goodbye);
-	_delay_ms(150);
-	stop_all_notes();
-    #endif
-}

keyboards/lets_split/rev2/rev2.c

@@ -1,9 +1,5 @@
 #include "lets_split.h"
 
-#ifdef AUDIO_ENABLE
-    float tone_startup[][2] = SONG(STARTUP_SOUND);
-    float tone_goodbye[][2] = SONG(GOODBYE_SOUND);
-#endif
 
 #ifdef SSD1306OLED
 void led_set_kb(uint8_t usb_led) {
@@ -14,11 +10,6 @@ void led_set_kb(uint8_t usb_led) {
 
 void matrix_init_kb(void) {
 
-    #ifdef AUDIO_ENABLE
-        _delay_ms(20); // gets rid of tick
-        PLAY_SONG(tone_startup);
-    #endif
-
     // // green led on
     // DDRD |= (1<<5);
     // PORTD &= ~(1<<5);
@@ -30,10 +21,3 @@ void matrix_init_kb(void) {
 	matrix_init_user();
 };
 
-void shutdown_user(void) {
-    #ifdef AUDIO_ENABLE
-        PLAY_SONG(tone_goodbye);
-	_delay_ms(150);
-	stop_all_notes();
-    #endif
-}

keyboards/lets_split/sockets/sockets.c

@@ -1,9 +1,5 @@
 #include "lets_split.h"
 
-#ifdef AUDIO_ENABLE
-    float tone_startup[][2] = SONG(STARTUP_SOUND);
-    float tone_goodbye[][2] = SONG(GOODBYE_SOUND);
-#endif
 
 #ifdef SSD1306OLED
 void led_set_kb(uint8_t usb_led) {
@@ -14,11 +10,6 @@ void led_set_kb(uint8_t usb_led) {
 
 void matrix_init_kb(void) {
 
-    #ifdef AUDIO_ENABLE
-        _delay_ms(20); // gets rid of tick
-        PLAY_SONG(tone_startup);
-    #endif
-
     // // green led on
     // DDRD |= (1<<5);
     // PORTD &= ~(1<<5);
@@ -29,11 +20,3 @@ void matrix_init_kb(void) {
 
 	matrix_init_user();
 };
-
-void shutdown_user(void) {
-    #ifdef AUDIO_ENABLE
-        PLAY_SONG(tone_goodbye);
-	_delay_ms(150);
-	stop_all_notes();
-    #endif
-}

keyboards/levinson/rev1/rev1.c

@@ -1,9 +1,5 @@
 #include "levinson.h"
 
-#ifdef AUDIO_ENABLE
-    float tone_startup[][2] = SONG(STARTUP_SOUND);
-    float tone_goodbye[][2] = SONG(GOODBYE_SOUND);
-#endif
 
 #ifdef SSD1306OLED
 void led_set_kb(uint8_t usb_led) {
@@ -14,11 +10,6 @@ void led_set_kb(uint8_t usb_led) {
 
 void matrix_init_kb(void) {
 
-    #ifdef AUDIO_ENABLE
-        _delay_ms(20); // gets rid of tick
-        PLAY_SONG(tone_startup);
-    #endif
-
     // // green led on
     // DDRD |= (1<<5);
     // PORTD &= ~(1<<5);
@@ -30,10 +21,3 @@ void matrix_init_kb(void) {
 	matrix_init_user();
 };
 
-void shutdown_user(void) {
-    #ifdef AUDIO_ENABLE
-        PLAY_SONG(tone_goodbye);
-	_delay_ms(150);
-	stop_all_notes();
-    #endif
-}

keyboards/levinson/rev2/rev2.c

@@ -1,10 +1,5 @@
 #include "levinson.h"
 
-#ifdef AUDIO_ENABLE
-    float tone_startup[][2] = SONG(STARTUP_SOUND);
-    float tone_goodbye[][2] = SONG(GOODBYE_SOUND);
-#endif
-
 #ifdef SSD1306OLED
 void led_set_kb(uint8_t usb_led) {
     // put your keyboard LED indicator (ex: Caps Lock LED) toggling code here
@@ -14,11 +9,6 @@ void led_set_kb(uint8_t usb_led) {
 
 void matrix_init_kb(void) {
 
-    #ifdef AUDIO_ENABLE
-        _delay_ms(20); // gets rid of tick
-        PLAY_SONG(tone_startup);
-    #endif
-
     // // green led on
     // DDRD |= (1<<5);
     // PORTD &= ~(1<<5);
@@ -30,10 +20,3 @@ void matrix_init_kb(void) {
 	matrix_init_user();
 };
 
-void shutdown_user(void) {
-    #ifdef AUDIO_ENABLE
-        PLAY_SONG(tone_goodbye);
-	_delay_ms(150);
-	stop_all_notes();
-    #endif
-}

keyboards/orthodox/keymaps/drashna/config.h

@@ -63,6 +63,7 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 #ifdef AUDIO_ENABLE
 #define C6_AUDIO
+#define STARTUP_SONG SONG(ZELDA_PUZZLE)
 #endif
 
 #endif

keyboards/orthodox/keymaps/drashna/keymap.c

@@ -19,7 +19,7 @@ You should have received a copy of the GNU General Public License
 along with this program.  If not, see <http://www.gnu.org/licenses/>.
 */
 
-#include "orthodox.h"
+#include QMK_KEYBOARD_H
 #include "drashna.h"
 
 
@@ -32,6 +32,18 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define _______ KC_TRNS
 #define XXXXXXX KC_NO
 
+#ifdef FAUXCLICKY_ENABLE
+float fauxclicky_pressed_note[2] = MUSICAL_NOTE(_A6, 2);  // (_D4, 0.25);
+float fauxclicky_released_note[2] = MUSICAL_NOTE(_A6, 2); // (_C4, 0.125);
+float fauxclicky_beep_note[2] = MUSICAL_NOTE(_C6, 2);       // (_C4, 0.25);
+#define AUD_ON  FC_ON
+#define AUD_OFF FC_OFF
+#else
+#define AUD_ON  AU_ON
+#define AUD_OFF AU_OFF
+
+#endif 
+
 
 const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
 
@@ -48,20 +60,20 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
 ),
 
 [_DVORAK] = KEYMAP(\
-    KC_ESC,   KC_QUOT, KC_COMM, KC_DOT, KC_P,     KC_Y,                                                                   KC_F,    KC_G,    KC_C,    KC_R,    KC_L,    KC_BSPC, \
-    KC_TAB,   KC_A,    KC_O,    KC_E,   KC_U,     KC_I,      KC_UP, XXXXXXX,  KC_DOWN,        KC_LEFT, XXXXXXX, KC_RIGHT, KC_D,    KC_H,    KC_T,    KC_N,    KC_S,    KC_MINS, \
-    KC_LSFT, CTL_T(KC_SCLN), KC_Q, KC_J, KC_K,    KC_X,      LOWER, KC_SPACE, KC_BSPC,        KC_DEL,  KC_ENT,  RAISE,    KC_B,    KC_M,    KC_W,    KC_V,    CTL_T(KC_Z), KC_LGUI \
+  KC_ESC,   KC_QUOT, KC_COMM, KC_DOT, KC_P,     KC_Y,                                                                   KC_F,    KC_G,    KC_C,    KC_R,    KC_L,    KC_BSPC, \
+  KC_TAB,   KC_A,    KC_O,    KC_E,   KC_U,     KC_I,      KC_UP, XXXXXXX,  KC_DOWN,        KC_LEFT, XXXXXXX, KC_RIGHT, KC_D,    KC_H,    KC_T,    KC_N,    KC_S,    KC_MINS, \
+  KC_LSFT, CTL_T(KC_SCLN), KC_Q, KC_J, KC_K,    KC_X,      LOWER, KC_SPACE, KC_BSPC,        KC_DEL,  KC_ENT,  RAISE,    KC_B,    KC_M,    KC_W,    KC_V,    CTL_T(KC_Z), KC_LGUI \
 ),
 [_WORKMAN] = KEYMAP(\
-    KC_ESC,   KC_QUOT, KC_COMM, KC_DOT, KC_P,     KC_Y,                                                                   KC_F,    KC_G,    KC_C,    KC_R,    KC_L,    KC_BSPC, \
-    KC_TAB,   KC_A,    KC_O,    KC_E,   KC_U,     KC_I,      KC_UP, XXXXXXX,  KC_DOWN,        KC_LEFT, XXXXXXX, KC_RIGHT, KC_D,    KC_H,    KC_T,    KC_N,    KC_S,    KC_MINS, \
-    KC_LSFT, CTL_T(KC_SCLN), KC_Q, KC_J, KC_K,    KC_X,      LOWER, KC_SPACE, KC_BSPC,        KC_DEL,  KC_ENT,  RAISE,    KC_B,    KC_M,    KC_W,    KC_V,    CTL_T(KC_Z), KC_LGUI \
+  KC_ESC,   KC_QUOT, KC_COMM, KC_DOT, KC_P,     KC_Y,                                                                   KC_F,    KC_G,    KC_C,    KC_R,    KC_L,    KC_BSPC, \
+  KC_TAB,   KC_A,    KC_O,    KC_E,   KC_U,     KC_I,      KC_UP, XXXXXXX,  KC_DOWN,        KC_LEFT, XXXXXXX, KC_RIGHT, KC_D,    KC_H,    KC_T,    KC_N,    KC_S,    KC_MINS, \
+  KC_LSFT, CTL_T(KC_SCLN), KC_Q, KC_J, KC_K,    KC_X,      LOWER, KC_SPACE, KC_BSPC,        KC_DEL,  KC_ENT,  RAISE,    KC_B,    KC_M,    KC_W,    KC_V,    CTL_T(KC_Z), KC_LGUI \
 ),
 
 [_LOWER] = KEYMAP(\
-  KC_TILD,    KC_EXLM, KC_AT,   KC_HASH, KC_DLR,  KC_PERC,                                                                KC_CIRC, KC_AMPR,    KC_ASTR,    KC_LPRN, KC_RPRN, KC_BSPC, \
-  KC_DEL,     KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F11,   XXXXXXX, KC_F12,          _______, XXXXXXX, KC_RCTL, XXXXXXX, KC_UNDS,    KC_PLUS,    KC_LCBR, KC_RCBR, KC_PIPE, \
-  _______,    KC_F6,   KC_F7,   KC_F8,   KC_F9,   KC_F10,  _______, _______, _______,          _______, _______, _______, XXXXXXX, KC_HOME,    KC_COMM,    KC_DOT,  KC_END,  _______ \
+  KC_TILD, KC_EXLM, KC_AT,   KC_HASH, KC_DLR,  KC_PERC,                                                                KC_CIRC, KC_AMPR,    KC_ASTR,    KC_LPRN, KC_RPRN, KC_BSPC, \
+  KC_DEL,  KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,      KC_F11,   XXXXXXX, KC_F12,          _______, XXXXXXX, KC_RCTL, XXXXXXX, KC_UNDS,    KC_PLUS,    KC_LCBR, KC_RCBR, KC_PIPE, \
+  _______, KC_F6,   KC_F7,   KC_F8,   KC_F9,   KC_F10,     _______, _______, _______,          _______, _______, _______, XXXXXXX, KC_HOME,    KC_COMM,    KC_DOT,  KC_END,  _______ \
 ),
 
 [_RAISE] = KEYMAP(\
@@ -72,15 +84,10 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
 
 [_ADJUST] = KEYMAP(\
   KC_MAKE,KC_RESET, _______, _______, _______, _______,                                                                _______, _______, _______, _______, _______, _______,  \
-  RGB_SMOD,RGB_HUI, _______, AU_ON,   AU_OFF,  AG_NORM, _______, XXXXXXX, _______,          _______, XXXXXXX, _______, AG_SWAP, KC_QWERTY, KC_COLEMAK, KC_DVORAK, KC_WORKMAN, _______, \
+  RGB_SMOD,RGB_HUI, _______, AUD_ON,  AUD_OFF, AG_NORM, _______, XXXXXXX, _______,          _______, XXXXXXX, _______, AG_SWAP, KC_QWERTY, KC_COLEMAK, KC_DVORAK, KC_WORKMAN, _______, \
   KC_RGB_T,RGB_HUD, MU_ON,   MU_OFF,  MU_TOG,  MU_MOD,  _______, _______, _______,          _______, _______, _______, MAGIC_TOGGLE_NKRO, KC_MUTE, KC_VOLD, KC_VOLU, KC_MNXT, KC_MPLY  \
 )
 
 
 };
 
-#ifdef FAUXCLICKY_ENABLE
-float fauxclicky_pressed_note[2] = MUSICAL_NOTE(_A6, 2);  // (_D4, 0.25);
-float fauxclicky_released_note[2] = MUSICAL_NOTE(_A6, 2); // (_C4, 0.125);
-float fauxclicky_beep_note[2] = MUSICAL_NOTE(_C6, 2);       // (_C4, 0.25);
-#endif 

keyboards/viterbi/keymaps/drashna/keymap.c

@@ -1,4 +1,4 @@
-#include "viterbi.h"
+#include QMK_KEYBOARD_H
 #include "action_layer.h"
 #include "eeconfig.h"
 #include "drashna.h"

keyboards/viterbi/rev1/rev1.c

@@ -1,9 +1,5 @@
 #include "viterbi.h"
 
-#ifdef AUDIO_ENABLE
-    float tone_startup[][2] = SONG(STARTUP_SOUND);
-    float tone_goodbye[][2] = SONG(GOODBYE_SOUND);
-#endif
 
 #ifdef SSD1306OLED
 void led_set_kb(uint8_t usb_led) {
@@ -14,11 +10,6 @@ void led_set_kb(uint8_t usb_led) {
 
 void matrix_init_kb(void) {
 
-    #ifdef AUDIO_ENABLE
-        _delay_ms(20); // gets rid of tick
-        PLAY_NOTE_ARRAY(tone_startup, false, 0);
-    #endif
-
     // // green led on
     // DDRD |= (1<<5);
     // PORTD &= ~(1<<5);
@@ -29,11 +20,3 @@ void matrix_init_kb(void) {
 
 	matrix_init_user();
 };
-
-void shutdown_user(void) {
-    #ifdef AUDIO_ENABLE
-        PLAY_NOTE_ARRAY(tone_goodbye, false, 0);
-	_delay_ms(150);
-	stop_all_notes();
-    #endif
-}

keyboards/whitefox/matrix.c

@@ -49,6 +49,7 @@ void matrix_init(void)
 
     memset(matrix, 0, MATRIX_ROWS);
     memset(matrix_debouncing, 0, MATRIX_ROWS);
+    matrix_init_quantum();
 }
 
 uint8_t matrix_scan(void)
@@ -102,6 +103,7 @@ uint8_t matrix_scan(void)
         }
         debouncing = false;
     }
+    matrix_scan_quantum();
     return 1;
 }
 

keyboards/whitefox/whitefox.c

@@ -15,3 +15,20 @@ You should have received a copy of the GNU General Public License
 along with this program.  If not, see <http://www.gnu.org/licenses/>.
 */
 #include "whitefox.h"
+
+__attribute__ ((weak))
+void matrix_init_user(void) {
+}
+
+__attribute__ ((weak))
+void matrix_scan_user(void) {
+}
+
+void matrix_init_kb(void) {
+  matrix_init_user();
+};
+
+void matrix_scan_kb(void) {
+  matrix_scan_user();
+};
+

keyboards/xd75/config.h

@@ -50,7 +50,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define DIODE_DIRECTION COL2ROW
  
 #define BACKLIGHT_PIN F5
-#define BACKLIGHT_BREATHING
 #define BACKLIGHT_LEVELS 6
 
 

keyboards/xd75/readme.md

@@ -26,6 +26,46 @@ firmware likely requires a command line like:
 $ sudo make xd75:default:dfu
 ```
 
+### LED control
+
+There are 3 individual LEDs that can be turned on and off, plus the keycap LEDs (which are all wired into the same pin).  The functions are named according to how they're labeled on the PCB.
+
+TODO: it would be nice to have PWM support on these LEDs for fade-in/fade-out effects.
+
+```c
+capslock_led_on();
+gp100_led_on();
+gp103_led_on();
+keycaps_led_on();
+
+
+// led_set_user example - you could also turn these on/off in response
+// to events in process_record_user or matrix_scan_user
+void led_set_user(uint8_t usb_led) {
+    if (usb_led & (1<<USB_LED_CAPS_LOCK)) {
+        capslock_led_on();
+    } else {
+        capslock_led_off();
+    }
+
+    if (some_custom_state) {
+      gp100_led_on();
+    }
+    else {
+      gp100_led_off();
+    }
+}
+```
+
+For the curious:
+
+```
+CAPSLOCK_LED    B2
+GP103_LED       F4
+KEYCAPS_LED     F5
+GP100_LED       F7
+```
+
 ### Other Keymaps
 
 The "default" keymap included is basically the OLKB Atomic keymap with

keyboards/xd75/xd75.c

@@ -15,10 +15,20 @@
  */
 #include "xd75.h"
 
+#define XD75_CAPSLOCK_LED 2  // B2
+#define XD75_GP103_LED 4  // F4
+#define XD75_KEYCAPS_LED 5  // F5
+#define XD75_GP100_LED 7  // F7
+
 void matrix_init_kb(void) {
 	// put your keyboard start-up code here
 	// runs once when the firmware starts up
 
+	capslock_led_init();
+	gp100_led_init();
+	gp103_led_init();
+	keycaps_led_init();
+
 	matrix_init_user();
 }
 
@@ -41,3 +51,55 @@ void led_set_kb(uint8_t usb_led) {
 
 	led_set_user(usb_led);
 }
+
+void capslock_led_init(void) {
+	DDRB |= (1 << XD75_CAPSLOCK_LED);
+	capslock_led_off();
+}
+
+void capslock_led_off(void) {
+	PORTB |= (1 << XD75_CAPSLOCK_LED);
+}
+
+void capslock_led_on(void) {
+	PORTB &= ~(1 << XD75_CAPSLOCK_LED);
+}
+
+void gp100_led_init(void) {
+	DDRF |= (1 << XD75_GP100_LED);
+	gp100_led_off();
+}
+
+void gp100_led_off(void) {
+	PORTF |= (1 << XD75_GP100_LED);
+}
+
+void gp100_led_on(void) {
+	PORTF &= ~(1 << XD75_GP100_LED);
+}
+
+void gp103_led_init(void) {
+	DDRF |= (1 << XD75_GP103_LED);
+	gp103_led_off();
+}
+
+void gp103_led_off(void) {
+	PORTF &= ~(1 << XD75_GP103_LED);
+}
+
+void gp103_led_on(void) {
+	PORTF |= (1 << XD75_GP103_LED);
+}
+
+void keycaps_led_init(void) {
+	DDRF |= (1 << XD75_KEYCAPS_LED);
+	keycaps_led_off();
+}
+
+void keycaps_led_off(void) {
+	PORTF |= (1 << XD75_KEYCAPS_LED);
+}
+
+void keycaps_led_on(void) {
+	PORTF &= ~(1 << XD75_KEYCAPS_LED);
+}

keyboards/xd75/xd75.h

@@ -52,4 +52,20 @@
 
 #define LAYOUT_ortho_5x15 KEYMAP
 
+void capslock_led_init(void);
+void capslock_led_off(void);
+void capslock_led_on(void);
+
+void gp100_led_init(void);
+void gp100_led_off(void);
+void gp100_led_on(void);
+
+void gp103_led_init(void);
+void gp103_led_off(void);
+void gp103_led_on(void);
+
+void keycaps_led_init(void);
+void keycaps_led_off(void);
+void keycaps_led_on(void);
+
 #endif

layouts/community/ergodox/ordinary_osx/keymap.c

@@ -0,0 +1,504 @@
+#include QMK_KEYBOARD_H
+#include "led.h"
+#include "mousekey.h"
+#include "debug.h"
+#include "action_layer.h"
+#include "action_util.h"
+
+#define BASE   0 // default layer
+#define SYMB   1 // symbols layer
+#define MDIA   2 // media layer
+#define SPEC   3 // special layer
+#define RBASE  4 // reverse default layer
+
+#define LSymb 10 // left symbol-shift key
+#define LMdia 11 // left media-shift key
+#define LSpec 12 // left special-shift key
+#define RSymb 13 // right symbol-shift key
+#define RMdia 14 // right media-shift key
+#define RSpec 15 // right special-shift key
+
+#define NotEq 16 // != macro
+#define GrtEq 17 // >= macro
+#define LesEq 18 // <= macro
+#define DeRef 19 // -> macro
+
+#define MUL   20 // mouse up left
+#define MUR   21 // mouse up right
+#define MDL   22 // mouse down left
+#define MDR   23 // mouse down right
+
+
+
+/*
+ * The Ordinary Layout for the Ergodox EZ keyboard, v5
+ *
+ * Modifications from the default Ergodox EZ layout
+ * by Nicholas Keene ergodoxez@nicholaskeene.com
+ *
+ * No rights reserved. This software is in the public domain.
+ * Credit me if you are friendly but if you're a jerk don't bother.
+ * If you use or modify this layout I would love to hear from you.
+ *
+ * Details: readme.md
+ *          https://github.com/nrrkeene/qmk_firmware/tree/master/keyboards/ergodox/keymaps/ordinary
+ */
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+
+/******* Base Layer ****************************************************************************************************
+ *
+ * ,------------------------------------------------------.       ,------------------------------------------------------.
+ * | Special `~ |   1  |   2  |   3  |   4  |   5  | ESC  |       |  -   |   6  |   7  |   8  |   9  |   0  | =+ Special |
+ * |------------+------+------+------+------+-------------|       |------+------+------+------+------+------+------------|
+ * | Media  Tab |   Q  |   W  |   E  |   R  |   T  |Shift |       | Tab  |   Y  |   U  |   I  |   O  |   P  | \|   Media |
+ * |------------+------+------+------+------+------|-Tab  |       |      |------+------+------+------+------+------------|
+ * | Symbol     |  ^A  |   S  |   D  |  ^F  |   G  |------|       |------|   H  |  ^J  |   K  |   L  |  ^;  | '"  Symbol |
+ * |------------+------+------+------+------+------|  [   |       |  ]   |------+------+------+------+------+------------|
+ * | Capitals   |   Z  |   X  |   C  |   V  |   B  |      |       |      |   N  |   M  |   ,  |   .  |  /   |   Capitals |
+ * `------------+------+------+------+------+-------------'       `-------------+------+------+------+------+------------'
+ *      | Left | Right | LCtrl | LAlt | LGui|                                   | RGui | RAlt | RCtrl | Up |  Down  |
+ *      `-----------------------------------'                                   `-----------------------------------'
+ *                                          ,-------------.       ,-------------.
+ *                                          | Home | End  |       | Left | Right|
+ *                                   ,------|------|------|       |------+------+------.
+ *                                   |      |      | PgUp |       |  Up  |      |      |
+ *                                   |Backsp| Del  |------|       |------| Enter| Space|
+ *                                   |      |      | PgDn |       | Down |      |      |
+ *                                   `--------------------'       `--------------------'
+ */
+[BASE] = LAYOUT_ergodox(
+// left hand
+ F(LSpec)  ,KC_1           ,KC_2   ,KC_3   ,KC_4  ,KC_5  ,KC_ESC
+,F(LMdia)  ,KC_Q           ,KC_W   ,KC_E   ,KC_R  ,KC_T  ,LSFT(KC_TAB)
+,M(LSymb)  ,LT(RBASE, KC_A),KC_S   ,KC_D   ,LT(RBASE, KC_F)  ,KC_G
+,KC_LSFT   ,KC_Z           ,KC_X   ,KC_C   ,KC_V  ,KC_B  ,KC_LBRC
+,KC_LEFT   ,KC_RIGHT       ,KC_LCTL,KC_LALT,KC_LGUI
+                                         ,KC_HOME,KC_END
+                                                 ,KC_PGUP
+                                 ,KC_BSPC,KC_DEL ,KC_PGDN
+                                                                  // right hand
+                                                                 ,KC_MINS ,KC_6 ,KC_7           ,KC_8   ,KC_9   ,KC_0             ,F(RSpec)
+                                                                 ,KC_TAB  ,KC_Y ,KC_U           ,KC_I   ,KC_O   ,KC_P             ,F(RMdia)
+                                                                          ,KC_H ,LT(RBASE, KC_J),KC_K   ,KC_L   ,LT(RBASE,KC_SCLN),F(RSymb)
+                                                                 ,KC_RBRC ,KC_N ,KC_M           ,KC_COMM,KC_DOT ,KC_SLSH          ,KC_RSFT
+                                                                                ,KC_RGUI        ,KC_RALT,KC_RCTL,KC_UP            ,KC_DOWN
+                                                                 ,KC_LEFT ,KC_RGHT
+                                                                 ,KC_UP
+                                                                 ,KC_DOWN ,KC_ENT ,KC_SPC
+),
+
+/******* Symbols Layer *************************************************************************************************
+ *
+ * ,-----------------------------------------------------.       ,-----------------------------------------------------.
+ * |           |  F1  |  F2  |  F3  |  F4  |  F5  | Esc  |       |  -   |  F6  |  F7  |  F8  |  F9  |  F10 |           |
+ * |-----------+------+------+------+------+-------------|       |------+------+------+------+------+------+-----------|
+ * |           |   !  |   @  |   {  |   }  |   &  |  <   |       |  >   |   |  |   7  |   8  |   9  |   /  |           |
+ * |-----------+------+------+------+------+------|      |       |      |------+------+------+------+------+-----------|
+ * |           |   #  |   $  |   (  |   )  |   `  |------|       |------|   /  |   4  |   5  |   6  |   *  |           |
+ * |-----------+------+------+------+------+------|  '   |       |  "   |------+------+------+------+------+-----------|
+ * |           |   %  |   ^  |   [  |   ]  |   ~  |      |       |      |   \  |   1  |   2  |   3  |   -  |           |
+ * `-----------+------+------+------+------+-------------'       `-------------+------+------+------+------+-----------'
+ *     |   ;   |   &  |   *  |   <  |   >  |                                   |   0  |   .  |   =  |   +  | Enter |
+ *     `-----------------------------------'                                   `-----------------------------------'
+ *                                         ,-------------.       ,-------------.
+ *                                         | |||| | |||| |       | |||| | |||| |
+ *                                  ,------|------|------|       |------+------+------.
+ *                                  | Plus | Equal| |||| |       | |||| | Under| Dash |
+ *                                  |      |      |------|       |------| Score|      |
+ *                                  |  +   |   =  |  !=  |       |  ->  |  _   |  -   |
+ *                                  `--------------------'       `--------------------'
+ */
+[SYMB] = LAYOUT_ergodox(
+// left hand
+ KC_TRNS ,KC_F1       ,KC_F2        ,KC_F3   ,KC_F4   ,KC_F5   ,KC_ESC
+,KC_TRNS ,KC_EXLM     ,KC_AT        ,KC_LCBR ,KC_RCBR ,KC_AMPR ,LSFT(KC_COMM)
+,KC_TRNS ,KC_HASH     ,KC_DLR       ,KC_LPRN ,KC_RPRN ,KC_GRV
+,KC_TRNS ,KC_PERC     ,KC_CIRC      ,KC_LBRC ,KC_RBRC ,KC_TILD ,KC_QUOT
+,KC_SCLN ,KC_AMPR     ,KC_ASTR ,LSFT(KC_COMM),LSFT(KC_DOT)
+                                                      ,M(GrtEq),M(LesEq)
+                                                               ,KC_NO
+                                             ,KC_PLUS ,KC_EQL  ,M(NotEq)
+                                                                 // right hand
+                                                                 ,KC_MINS     ,KC_F6        ,KC_F7 ,KC_F8  ,KC_F9 ,KC_F10  ,KC_TRNS
+                                                                 ,LSFT(KC_DOT),KC_PIPE      ,KC_7  ,KC_8   ,KC_9  ,KC_SLSH ,KC_TRNS
+                                                                              ,KC_SLSH      ,KC_4  ,KC_5   ,KC_6  ,KC_ASTR ,KC_TRNS
+                                                                 ,LSFT(KC_QUOT),KC_BSLS     ,KC_1  ,KC_2   ,KC_3  ,KC_MINS ,KC_TRNS
+                                                                                            ,KC_0  ,KC_DOT ,KC_EQL,KC_PLUS ,KC_ENT
+                                                                 ,KC_NO       ,KC_NO
+                                                                 ,KC_NO
+                                                                 ,M(DeRef)    ,LSFT(KC_MINS),KC_MINS
+),
+
+/******* Media Layer *******************************************************************************************************
+ *
+ * ,---------------------------------------------------------------.    ,---------------------------------------------------------------.
+ * |      |   F11   |   F12   |   F13   |   F14   |   F15   | Esc  |    | |||| |   F16   |   F17   |   F18   |   F19   |   F20   |      |
+ * |------+---------+---------+---------+---------+----------------|    |------+---------+---------+---------+---------+---------+------|
+ * |      |Shut Down|MouseUpLf|Mouse Up |MouseUpRg|Volume Up|Scroll|    |Scroll|PrintScrn|   Home  |    Up   |   PgUp  |   Mail  |      |
+ * |------+---------+---------+---------+---------+---------|  Up  |    |  Up  |---------+---------+---------+---------+---------+------|
+ * |      |  Sleep  |MouseLeft|MouseDown|MouseRght|Volume Dn|------|    |------| Num Lock|   Left  |   Down  |   Right | MyComp  |      |
+ * |------+---------+---------+---------+---------+---------|Scroll|    |Scroll|---------+---------+---------+---------+---------+------|
+ * |      |  ||||   |MouseDnLf|MouseDown|MouseDnRg|  Mute   | Down |    | Down |  ||||   |   End   |   Down  |   PgDn  |  ||||   |      |
+ * `------+---------+---------+---------+---------+----------------'    `----------------+---------+---------+---------+---------+------'
+ *  | ||| |  ||||   |  MClick | LClick  |  R Click|                                      |  Insert |   Del   |   ||||  |  ||||   | ||| |
+ *  `---------------------------------------------'                                      `---------------------------------------------'
+ *                                                   ,-------------.    ,-------------.
+ *                                                   | Stop |Refrsh|    | Prev | Next |
+ *                                            ,------|------|------|    |------+------+------.
+ *                                            |Brwser|Brwser|Search|    |VolUp |      |      |
+ *                                            |Back  | Fwd  |------|    |------| Stop | Play-|
+ *                                            |      |      | Home |    |VolDn |      | Pause|
+ *                                            `--------------------'    `--------------------'
+ */
+[MDIA] = LAYOUT_ergodox(
+// left hand
+ KC_TRNS ,KC_F11   ,KC_F12  ,KC_F13   ,KC_F14  ,KC_F15  ,KC_ESC
+,KC_TRNS ,KC_POWER ,M(MUL)  ,KC_MS_U  ,M(MUR)  ,KC_VOLU ,KC_WH_U
+,KC_TRNS ,KC_SLEP  ,KC_MS_L ,KC_MS_D  ,KC_MS_R ,KC_VOLD
+,KC_TRNS ,KC_NO    ,M(MDL)  ,KC_MS_D  ,M(MDR)  ,KC_MUTE ,KC_WH_D
+,KC_NO ,KC_NO   ,KC_BTN3 ,KC_BTN1  ,KC_BTN2
+                                               ,KC_WSTP ,KC_WREF
+                                                        ,KC_WSCH
+                                      ,KC_WBAK ,KC_NO   ,KC_WHOM
+                                                                     // right hand
+                                                                     ,KC_NO    ,KC_F16  ,KC_F17       ,KC_F18       ,KC_F19  ,KC_F20  ,KC_TRNS
+                                                                     ,KC_WH_U  ,KC_PSCR ,KC_HOME      ,KC_UP        ,KC_PGUP ,KC_MAIL ,KC_TRNS
+                                                                               ,KC_NLCK ,KC_LEFT      ,KC_DOWN      ,KC_RIGHT,KC_MYCM ,KC_TRNS
+                                                                     ,KC_WH_D  ,KC_NO   ,KC_END       ,KC_DOWN      ,KC_PGDN ,KC_NO   ,KC_TRNS
+                                                                                        ,KC_INS       ,KC_DEL       ,KC_NO   ,KC_NO   ,KC_NO
+                                                                     ,KC_MPRV  ,KC_MNXT
+                                                                     ,KC_VOLU
+                                                                     ,KC_VOLD  ,KC_MSTP ,KC_MPLY
+),
+
+/******* Special Layer *****************************************************************************************************
+ *
+ * ,-------------------------------------------------------.    ,-------------------------------------------------------.
+ * |             |  Esc |      |      |      |      |      |    |      |      |      |      |   -  | Bspc |             |
+ * |-------------+------+------+------+------+-------------|    |------+------+------+------+------+------+-------------|
+ * | Media Lock  |      |      |      |      |      |      |    |      |      |      |      |  [   |   ]  | Media Lock  |
+ * |-------------+------+------+------+------+------|      |    |      |------+------+------+------+------+-------------|
+ * | Symbol Lock |      |      |      |      |      |------|    |------|      |      |      |      |      | Symbol Lock |
+ * |-------------+------+------+------+------+------|      |    |      |------+------+------+------+------+-------------|
+ * | Caps Lock   |      |      |      |      |      |      |    |      |      |      |      |      |      | Caps Lock   |
+ * `-------------+------+------+------+------+-------------'    `-------------+------+------+------+------+-------------'
+ *      |        |      |      |      |      |                                |      |      |      |      |        |
+ *      `------------------------------------'                                `------------------------------------'
+ *                                         ,-------------.     ,-------------.
+ *                                         |      |      |     |      |      |
+ *                                  ,------|------|------|     |------+------+------.
+ *                                  |      |      |      |     |      |      |      |
+ *                                  |      |      |------|     |------|      |      |
+ *                                  |      |      |      |     |      |      |      |
+ *                                  `--------------------'     `--------------------'
+ */
+[SPEC] = LAYOUT_ergodox(
+// left hand
+ KC_TRNS ,KC_ESC  ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS
+,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS
+,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS
+,KC_CAPS ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS
+,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS
+                                             ,KC_TRNS ,KC_TRNS
+                                                      ,KC_TRNS
+                                     ,KC_TRNS,KC_TRNS ,KC_TRNS
+                                                             // right hand
+                                                             ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_MINS ,KC_BSPC ,KC_TRNS
+                                                             ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_LBRC ,KC_RBRC ,KC_TRNS
+                                                                      ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS
+                                                             ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_CAPS
+                                                                               ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS
+                                                             ,KC_TRNS ,KC_TRNS
+                                                             ,KC_TRNS
+                                                             ,KC_TRNS ,KC_TRNS ,KC_TRNS
+),
+
+/******* Reverse Base Layer *********************************************************************************************
+ *
+ * ,------------------------------------------------------.       ,------------------------------------------------------.
+ * |    =+      |   0  |   9  |   8  |   7  |   6  |  -   |       |  Esc |   5  |   4  |   3  |   2  |   1  |    `~      |
+ * |------------+------+------+------+------+-------------|       |------+------+------+------+------+------+------------|
+ * |    \|      |   P  |   O  |   I  |   U  |   Y  |   ]  |       |  [   |   T  |   R  |   E  |   W  |   Q  |    Tab     |
+ * |------------+------+------+------+------+------|      |       |      |------+------+------+------+------+------------|
+ * |    '"      |   ;  |   L  |   K  |   J  |   H  |------|       |------|   G  |   F  |   D  |   S  |  A   |            |
+ * |------------+------+------+------+------+------| Tab  |       |Shift |------+------+------+------+------+------------|
+ * | Capitals   |   /  |   .  |   ,  |   M  |   N  |      |       | -Tab |   B  |   V  |   C  |   X  |  Z   |   Capitals |
+ * `------------+------+------+------+------+-------------'       `-------------+------+------+------+------+------------'
+ *      | LCtrl | Meh  |Hyper | LAlt | LGui |                                   | RGui | RAlt | Hyper|  Meh | RCtrl |
+ *      `-----------------------------------'                                   `-----------------------------------'
+ *                                         ,-------------.       ,-------------.
+ *                                         | Left | Right|       | Home | End  |
+ *                                  ,------|------|------|       |------+------+------.
+ *                                  |      |      |  Up  |       | PgUp |      |      |
+ *                                  |Space |Enter |------|       |------|BackSp| Del  |
+ *                                  |      |      | Down |       | PgDn |      |      |
+ *                                  `--------------------'       `--------------------'
+ */
+[RBASE] = LAYOUT_ergodox(
+// left hand
+ KC_EQL    ,KC_0        ,KC_9   ,KC_8   ,KC_7  ,KC_6  ,KC_MINS
+,KC_BSLS   ,KC_P        ,KC_O   ,KC_I   ,KC_U  ,KC_Y  ,KC_RBRC
+,KC_QUOT     ,LT(RBASE, KC_SCLN)     ,KC_L   ,KC_K   ,LT(RBASE, KC_J)  ,KC_H
+,KC_RSFT   ,KC_SLSH     ,KC_DOT ,KC_COMM,KC_M  ,KC_N  ,KC_TAB
+,KC_RCTL   ,MEH_T(KC_NO),ALL_T(KC_NO),KC_RALT,KC_RGUI
+                                             ,KC_LEFT ,KC_RGHT
+                                                      ,KC_UP
+                                    ,KC_SPC  ,KC_ENT  ,KC_DOWN
+                                                                  // right hand
+                                                                 ,KC_ESC      ,KC_5   ,KC_4   ,KC_3   ,KC_2    ,KC_1  ,KC_GRV
+                                                                 ,KC_LBRC     ,KC_T   ,KC_R   ,KC_E   ,KC_W    ,KC_Q  ,KC_TAB
+                                                                              ,KC_G   ,LT(RBASE, KC_F),KC_D   ,KC_S   ,LT(RBASE, KC_A)  ,KC_NO
+                                                                 ,LSFT(KC_TAB),KC_B   ,KC_V   ,KC_C   ,KC_X    ,KC_Z  ,KC_LSFT
+                                                                                      ,KC_LGUI,KC_LALT,KC_HYPR ,KC_MEH,KC_LCTL
+                                                                 ,KC_HOME     ,KC_END
+                                                                 ,KC_PGUP
+                                                                 ,KC_PGDN     ,KC_BSPC ,KC_DEL
+)
+};
+
+const uint16_t PROGMEM fn_actions[] = {
+     // the faux shift keys are implemented as macro taps
+     [LSymb] = ACTION_MACRO_TAP(LSymb)
+    ,[LMdia] = ACTION_MACRO_TAP(LMdia)
+    ,[LSpec] = ACTION_MACRO_TAP(LSpec)
+    ,[RSymb] = ACTION_MACRO_TAP(RSymb)
+    ,[RMdia] = ACTION_MACRO_TAP(RMdia)
+    ,[RSpec] = ACTION_MACRO_TAP(RSpec)
+};
+
+uint16_t symb_shift = 0;
+uint16_t mdia_shift = 0;
+uint16_t spec_shift = 0;
+
+bool mdia_lock = false;
+bool symb_lock = false;
+
+const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt)
+{
+    switch(id) {
+        // There are two shift keys for each layer so we increment a layer_shift var when one
+        // is pressed and decrement when one is released. The shift counts are bound between 0 and 2
+        // only because sometimes rapid pressing led to irregular events; this way the states
+        // are self healing during use.
+
+        case LSymb:                                               //
+        if (record->event.pressed) {                              // when the LSymb button is pressed
+            if(++symb_shift > 2) symb_shift = 2;                  // increment the symb shift count, max two
+            if(spec_shift) symb_lock = !symb_lock;                // if the Special layer is on, toggle the shift lock
+            layer_on(SYMB);                                       // in any case, turn on the Symbols layer
+        } else {                                                  // when the LSymb button is released
+            if(--symb_shift < 0) symb_shift = 0;                  // decrement the shift count, minimum zero
+            if((!symb_shift) && (!symb_lock)) layer_off(SYMB);    // if both shifts are released and the lock is off, turn off the Symbols layer
+        }
+        break;
+
+        case LMdia:
+        if (record->event.pressed) {
+           if (record->tap.count && (!mdia_shift) && (!mdia_lock) && (!spec_shift)) {
+                register_code(KC_TAB);
+            } else {
+                if(spec_shift) mdia_lock = !mdia_lock;
+                if(++mdia_shift > 2) mdia_shift = 2;
+                layer_on(MDIA);
+            }
+        } else {
+            if(record->tap.count && (!mdia_shift) && (!mdia_lock) && (!spec_shift)) {
+                unregister_code(KC_TAB);
+            } else {
+                if(--mdia_shift < 0) mdia_shift = 0;
+                if((!mdia_shift) && (!mdia_lock)) layer_off(MDIA);
+            }
+        }
+        break;
+
+        case LSpec:
+        if (record->event.pressed) {                                     // when the LSpec button is pressed
+            if(symb_shift) symb_lock = !symb_lock;                       // if another layer button is engaged, then
+            else if(mdia_shift) mdia_lock = !mdia_lock;                  // lock that layer, be it caps or symb or mdia
+            else if (record->tap.count && !record->tap.interrupted && (!spec_shift)) {
+                register_code(KC_GRV);                                   // otherwise, if it's an uninterrupted tap, emit a char
+            } else {
+                if(++spec_shift > 2) spec_shift = 2;
+                layer_on(SPEC);                                          // otherwise, turn on the Special layer
+            }
+        } else {
+            if(record->tap.count && !record->tap.interrupted && (!spec_shift)) {
+                unregister_code(KC_GRV);
+            } else {
+                if(--spec_shift < 0) spec_shift = 0;
+                if(!spec_shift) layer_off(SPEC);
+            }
+        }
+        break;
+
+        case RSymb:
+        if (record->event.pressed) {
+            if (record->tap.count && (!symb_shift) && (!symb_lock) && (!spec_shift)) {
+                register_code(KC_QUOT);
+            } else {
+                if(++symb_shift > 2) symb_shift = 2;
+                if(spec_shift) symb_lock = !symb_lock;
+                layer_on(SYMB);
+            }
+        } else {
+            if(record->tap.count && (!symb_shift) && (!symb_lock) && (!spec_shift)) {
+                unregister_code(KC_QUOT);
+            } else {
+                if(--symb_shift < 0) symb_shift = 0;
+                if((!symb_shift) && (!symb_lock)) layer_off(SYMB);
+            }
+        }
+        break;
+
+        case RMdia:
+        if (record->event.pressed) {
+            if (record->tap.count && (!mdia_shift) && (!mdia_lock) && (!spec_shift)) {
+                register_code(KC_BSLS);
+            } else {
+                if(++mdia_shift > 2) mdia_shift = 2;
+                if(spec_shift) mdia_lock = !mdia_lock;
+                layer_on(MDIA);
+            }
+        } else {
+            if(record->tap.count && (!mdia_shift) && (!mdia_lock) && (!spec_shift)) {
+                unregister_code(KC_BSLS);
+            } else {
+                if(--mdia_shift < 0) mdia_shift = 0;
+                if((!mdia_shift) && (!mdia_lock)) layer_off(MDIA);
+            }
+        }
+        break;
+
+        case RSpec:
+        if (record->event.pressed) {
+            if(symb_shift) symb_lock = !symb_lock;
+            else if(mdia_shift) mdia_lock = !mdia_lock;
+            else if (record->tap.count && !record->tap.interrupted && (!spec_shift)) {
+                register_code(KC_EQL);
+            } else {
+                if(++spec_shift > 2) spec_shift = 2;
+                layer_on(SPEC);
+            }
+        } else {
+            if(record->tap.count && !record->tap.interrupted && (!spec_shift)) {
+                unregister_code(KC_EQL);
+            } else {
+                if(--spec_shift < 0) spec_shift = 0;
+                if(!spec_shift) layer_off(SPEC);
+            }
+        }
+        break;
+
+        case NotEq:
+        if (record->event.pressed) {
+            return MACRO( I(10), D(LSFT), T(1), U(LSFT), T(EQL), END  ); // !=
+        }
+        break;
+
+        case GrtEq:
+        if (record->event.pressed) {
+            return MACRO( I(10), D(LSFT), T(COMM), U(LSFT), T(EQL), END  ); // <=
+        }
+        break;
+
+        case LesEq:
+        if (record->event.pressed) {
+            return MACRO( I(10), D(LSFT), T(DOT), U(LSFT), T(EQL), END  ); // >=
+        }
+        break;
+
+        case DeRef:
+        if (record->event.pressed) {
+            return MACRO( I(10), T(MINS), D(LSFT), T(DOT), U(LSFT), END  ); // ->
+        }
+        break;
+
+        // mouse diagonals
+
+        case MUL: // mouse up left
+        if (record->event.pressed) {
+            mousekey_on(KC_MS_UP);
+            mousekey_on(KC_MS_LEFT);
+            mousekey_send();
+        } else {
+            mousekey_off(KC_MS_UP);
+            mousekey_off(KC_MS_LEFT);
+            mousekey_send();
+        }
+        break;
+
+        case MUR: // mouse up right
+        if (record->event.pressed) {
+            mousekey_on(KC_MS_UP);
+            mousekey_on(KC_MS_RIGHT);
+            mousekey_send();
+        } else {
+            mousekey_off(KC_MS_UP);
+            mousekey_off(KC_MS_RIGHT);
+            mousekey_send();
+        }
+        break;
+
+        case MDL: // mouse down left
+        if (record->event.pressed) {
+            mousekey_on(KC_MS_DOWN);
+            mousekey_on(KC_MS_LEFT);
+            mousekey_send();
+        } else {
+            mousekey_off(KC_MS_DOWN);
+            mousekey_off(KC_MS_LEFT);
+            mousekey_send();
+        }
+        break;
+
+        case MDR: // mouse down right
+        if (record->event.pressed) {
+            mousekey_on(KC_MS_DOWN);
+            mousekey_on(KC_MS_RIGHT);
+            mousekey_send();
+        } else {
+            mousekey_off(KC_MS_DOWN);
+            mousekey_off(KC_MS_RIGHT);
+            mousekey_send();
+        }
+        break;
+
+        default:
+            // none
+            break;
+    }
+
+    return MACRO_NONE;
+};
+
+// Runs just one time when the keyboard initializes.
+void matrix_init_user(void) {
+
+};
+
+// Runs constantly in the background, in a loop.
+void matrix_scan_user(void) {
+    // shift or caps lock turns on red light
+    if((keyboard_report->mods & MOD_BIT(KC_LSFT))
+    || (keyboard_report->mods & MOD_BIT(KC_RSFT))
+    || (host_keyboard_leds() & (1<<USB_LED_CAPS_LOCK))) {
+        ergodox_right_led_1_on();
+    } else {
+        ergodox_right_led_1_off();
+    }
+
+    // Symbol layer turns on green light
+    if(layer_state & (1UL<<SYMB)) {
+        ergodox_right_led_2_on();
+    } else {
+        ergodox_right_led_2_off();
+    }
+
+    // Media layer turns on blue light
+    if(layer_state & (1UL<<MDIA)) {
+        ergodox_right_led_3_on();
+    } else {
+        ergodox_right_led_3_off();
+    }
+};

layouts/community/ergodox/ordinary_osx/ordinary-base.txt

@@ -0,0 +1,27 @@
+[{x:3.5},"#\n3",{x:10.5},"*\n8"],
+[{y:-0.875,x:2.5},"@\n2",{x:1},"$\n4",{x:8.5},"&\n7",{x:1},"(\n9"],
+[{y:-0.875,x:5.5},"%\n5",{c:"#ff4444"},"Esc",{x:4.5,c:"#cccccc"},"_\n\n\n\n\n\n-","^\n6"],
+[{y:-0.875,c:"#c6c600",w:1.5},"Special\n\n~\n\n\n\nShift\n`",{c:"#cccccc"},"!\n1",{x:14.5},")\n0",{c:"#c6c600",w:1.5},"+\n\nSpecial\n\n\n\n=\nShift"],
+[{y:-0.375,x:3.5,c:"#cccccc"},"E",{x:10.5},"I"],
+[{y:-0.875,x:2.5},"W",{x:1},"R",{x:8.5},"U",{x:1},"O"],
+[{y:-0.875,x:5.5},"T",{h:1.5},"{\n\n\n\n\n\n[",{x:4.5,h:1.5},"}\n\n\n\n\n\n]","Y"],
+[{y:-0.875,c:"#c6c600",t:"#002299",w:1.5},"Media\n\nTab\n\n\n\nShift",{c:"#cccccc",t:"#000000"},"Q",{x:14.5},"P",{c:"#c6c600",t:"#002299",w:1.5},"|\n\\\nMedia\n\n\n\n\nShift"],
+[{y:-0.375,x:3.5,c:"#cccccc",t:"#000000"},"D",{x:10.5},"K"],
+[{y:-0.875,x:2.5},"S",{x:1,fa:[0,0,0,1]},"F\n\n\nreverse",{x:8.5},"J\n\n\nreverse",{x:1},"L"],
+[{y:-0.875,x:5.5},"G",{x:6.5},"H"],
+[{y:-0.875,c:"#c6c600",t:"#007d00",w:1.5},"Symbols\n\n\n\n\n\nShift",{c:"#cccccc",t:"#000000"},"A\n\n\nreverse",{x:14.5},":\n;\n\nreverse",{c:"#c6c600",t:"#007d00",w:1.5},"\"\n'\nSymbols\n\n\n\n\nShift"],
+[{y:-0.625,x:6.5,c:"#ff8500",t:"#000000",h:1.5},"< Tab\n\n\nShift Tab",{x:4.5,h:1.5},"Tab >\n\n\nTab"],
+[{y:-0.75,x:3.5,c:"#cccccc"},"C",{x:10.5},"<\n,"],
+[{y:-0.875,x:2.5},"X",{x:1},"V",{x:8.5},"M",{x:1},">\n."],
+[{y:-0.875,x:5.5},"B",{x:6.5},"N"],
+[{y:-0.875,c:"#c6c600",t:"#9e0000",w:1.5},"Capitals\n\n\n\n\n\nShift",{c:"#cccccc",t:"#000000"},"Z",{x:14.5},"?\n/",{c:"#c6c600",t:"#9e0000",w:1.5},"\n\nCapitals\n\n\n\n\nShift"],
+[{y:-0.375,x:3.5,c:"#dddd77",t:"#000000"},"Option\n\n\nLAlt",{x:10.5},"Option\n\n\nRAlt"],
+[{y:-0.875,x:2.5},"Hyper",{x:1},"Cmd\n\n\nSuper",{x:8.5},"Cmd\n\n\nSuper",{x:1},"Hyper"],
+[{y:-0.75,x:0.5},"Ctrl\n\n\nLCtrl","Meh",{x:14.5},"Meh","Ctrl\n\n\nRCtrl"],
+[{r:30,rx:6.5,ry:4.25,y:-1,x:1,c:"#ff8500"},"Home","End"],
+[{h:2},"< Del\n\n\nBackspace",{h:2},"Del >\n\n\nDelete","Page\n\n\n\n\n\nUp"],
+[{x:2},"Page\n\n\n\n\n\nDown"],
+[{r:-30,rx:13,y:-1,x:-3},"Left","Right"],
+[{x:-3},"Up",{h:2},"Enter",{h:2},"Space"],
+[{x:-3},"Down"]
+

layouts/community/ergodox/ordinary_osx/ordinary-media.txt

@@ -0,0 +1,27 @@
+[{x:3.5,c:"#99de2a"},"F13",{x:10.5},"F18"],
+[{y:-0.875,x:2.5},"F12",{x:1},"F14",{x:8.5},"F17",{x:1},"F19"],
+[{y:-0.875,x:5.5},"F15",{c:"#ff4444"},"Esc",{x:4.5,c:"#737373",a:7},"",{c:"#99de2a",a:4},"F16"],
+[{y:-0.875,c:"#c6c600",w:1.5},"Shift\n\n\n\n\n\nLock",{c:"#99de2a"},"F11",{x:14.5},"F20",{c:"#c6c600",w:1.5},"\n\nShift\n\n\n\n\nLock"],
+[{y:-0.375,x:3.5,c:"#0066cc"},"Mouse\n\n\n\n\n\nUp",{x:10.5},"Cursor\n\n\n\n\n\nUp"],
+[{y:-0.875,x:2.5},"Mouse\n\n\n\n\n\nUpLeft",{x:1},"Mouse\n\n\n\n\n\nUpRgt",{x:8.5,c:"#1e8fff"},"Home",{x:1},"Page\n\n\n\n\n\nUp"],
+[{y:-0.875,x:5.5,c:"#9977ee"},"Vol\n\n\n\n\n\nUp",{c:"#1e8fff",h:1.5},"Scroll\n\n\n\n\n\nUp",{x:4.5,h:1.5},"Scroll\n\n\n\n\n\nUp",{c:"#9977ee"},"Print\n\n\n\n\n\nScreen"],
+[{y:-0.875,c:"#000000",t:"#3f68ff",w:1.5},"Media\n\n\n\n\n\nShift",{c:"#9977ee",t:"#000000"},"Shut\n\n\n\n\n\nDown",{x:14.5},"Mail",{c:"#000000",t:"#3f68ff",w:1.5},"\n\nMedia\n\n\n\n\nShift"],
+[{y:-0.375,x:3.5,c:"#0066cc",t:"#000000"},"Mouse\n\n\n\n\n\nDown",{x:10.5},"Cursor\n\n\n\n\n\nDown"],
+[{y:-0.875,x:2.5},"Mouse\n\n\n\n\n\nLeft",{x:1},"Mouse\n\n\n\n\n\nRight",{x:8.5},"Cursor\n\n\n\n\n\nLeft",{x:1},"Cursor\n\n\n\n\n\nRight"],
+[{y:-0.875,x:5.5,c:"#9977ee"},"Vol\n\n\n\n\n\nDown",{x:6.5},"Num\n\n\n\n\n\nLock"],
+[{y:-0.875,c:"#c6c600",t:"#007d00",w:1.5},"Symbols\n\n\n\n\n\nShift",{c:"#9977ee",t:"#000000"},"Sleep",{x:14.5},"My\n\n\n\n\n\nComp",{c:"#c6c600",t:"#007d00",w:1.5},"\n\nSymbols\n\n\n\n\nShift"],
+[{y:-0.625,x:6.5,c:"#1e8fff",t:"#000000",h:1.5},"Scroll\n\n\n\n\n\nDown",{x:4.5,h:1.5},"Scroll\n\n\n\n\n\nDown"],
+[{y:-0.75,x:3.5,c:"#0066cc"},"Mouse\n\n\n\n\n\nDown",{x:10.5},"Cursor\n\n\n\n\n\nDown"],
+[{y:-0.875,x:2.5},"Mouse\n\n\n\n\n\nDnLeft",{x:1},"Mouse\n\n\n\n\n\nDnRgt",{x:8.5,c:"#1e8fff"},"End",{x:1},"Page\n\n\n\n\n\nDown"],
+[{y:-0.875,x:5.5,c:"#9977ee"},"Mute",{x:6.5,c:"#737373",a:7},""],
+[{y:-0.875,c:"#c6c600",t:"#9e0000",a:4,w:1.5},"Capitals\n\n\n\n\n\nShift",{c:"#737373",t:"#000000",a:7},"",{x:14.5},"",{c:"#c6c600",t:"#9e0000",a:4,w:1.5},"\n\nCapitals\n\n\n\n\nShift"],
+[{y:-0.375,x:3.5,c:"#0066cc",t:"#000000"},"Middle\n\n\n\n\n\nClick",{x:10.5,c:"#1e8fff"},"Delete"],
+[{y:-0.875,x:2.5,c:"#0066cc"},"Left\n\n\n\n\n\nClick",{x:1},"Right\n\n\n\n\n\nClick",{x:8.5,c:"#1e8fff"},"Insert",{x:1,c:"#737373",a:7},""],
+[{y:-0.75,x:0.5},"","",{x:14.5},"",""],
+[{r:30,rx:6.5,ry:4.25,y:-1,x:1,c:"#6633ee",a:4,fa:[0,0,0,1]},"Stop\n\n\nBrowser","Reload\n\n\nBrowser"],
+[{h:2},"< Web\n\n\nBrowser",{h:2},"Web >\n\n\nBrowser","Search\n\n\nBrowser"],
+[{x:2},"Home\n\n\nBrowser"],
+[{r:-30,rx:13,y:-1,x:-3},"Prev\n\n\nAudio\n\n\nTrack","Next\n\n\nAudio\n\n\nTrack"],
+[{x:-3,c:"#9977ee"},"Vol\n\n\n\n\n\nUp",{c:"#6633ee",h:2},"Stop\n\n\nAudio",{h:2},"Play\n\n\nAudio\n\n\nPause"],
+[{x:-3,c:"#9977ee"},"Vol\n\n\n\n\n\nDown"]
+

layouts/community/ergodox/ordinary_osx/ordinary-special.txt

@@ -0,0 +1,27 @@
+[{x:3.5,a:7},"",{x:10.5},""],
+[{y:-0.875,x:2.5},"",{x:1},"",{x:8.5},"",{x:1,a:4},"_\n\n\n\n\n\n-"],
+[{y:-0.875,x:5.5,a:7},"",{c:"#ff4444",a:4},"Esc",{x:4.5,c:"#cccccc",a:7},"",""],
+[{y:-0.875,c:"#000000",t:"#ff0000",a:4,w:1.5},"Special\n\n\n\n\n\nShift",{c:"#ff4444",t:"#000000"},"Esc",{x:14.5,c:"#ff8500"},"Back\n\n\n\n\n\nspace",{c:"#000000",t:"#ff0000",w:1.5},"\n\nSpecial\n\n\n\n\nShift"],
+[{y:-0.375,x:3.5,c:"#cccccc",t:"#000000",a:7},"",{x:10.5},""],
+[{y:-0.875,x:2.5},"",{x:1},"",{x:8.5},"",{x:1,a:4},"{\n["],
+[{y:-0.875,x:5.5,a:7},"",{h:1.5},"",{x:4.5,h:1.5},"",""],
+[{y:-0.875,c:"#c6c600",t:"#002299",a:4,w:1.5},"Media\n\n\n\n\n\nLock",{c:"#cccccc",t:"#000000",a:7},"",{x:14.5,a:4},"\n\n}\n]",{c:"#c6c600",t:"#002299",w:1.5},"Media\n\n\n\n\n\nLock"],
+[{y:-0.375,x:3.5,c:"#cccccc",t:"#000000",a:7},"",{x:10.5},""],
+[{y:-0.875,x:2.5},"",{x:1},"",{x:8.5},"",{x:1},""],
+[{y:-0.875,x:5.5},"",{x:6.5},""],
+[{y:-0.875,c:"#c6c600",t:"#007d00",a:4,w:1.5},"Symbols\n\n\n\n\n\nLock",{c:"#cccccc",t:"#000000",a:7},"",{x:14.5},"",{c:"#c6c600",t:"#007d00",a:4,w:1.5},"Symbols\n\n\n\n\n\nLock"],
+[{y:-0.625,x:6.5,c:"#cccccc",t:"#000000",a:7,h:1.5},"",{x:4.5,h:1.5},""],
+[{y:-0.75,x:3.5},"",{x:10.5},""],
+[{y:-0.875,x:2.5},"",{x:1},"",{x:8.5},"",{x:1},""],
+[{y:-0.875,x:5.5},"",{x:6.5},""],
+[{y:-0.875,c:"#c6c600",t:"#9e0000",a:4,w:1.5},"Capitals\n\n\n\n\n\nLock",{c:"#cccccc",t:"#000000",a:7},"",{x:14.5},"",{c:"#c6c600",t:"#9e0000",a:4,w:1.5},"Capitals\n\n\n\n\n\nLock"],
+[{y:-0.375,x:3.5,c:"#cccccc",t:"#000000",a:7},"",{x:10.5},""],
+[{y:-0.875,x:2.5},"",{x:1},"",{x:8.5},"",{x:1},""],
+[{y:-0.75,x:0.5},"","",{x:14.5},"",""],
+[{r:30,rx:6.5,ry:4.25,y:-1,x:1},"",""],
+[{h:2},"",{h:2},"",""],
+[{x:2},""],
+[{r:-30,rx:13,y:-1,x:-3},"",""],
+[{x:-3},"",{h:2},"",{h:2},""],
+[{x:-3},""]
+

layouts/community/ergodox/ordinary_osx/ordinary-symbol.txt

@@ -0,0 +1,27 @@
+[{x:3.5,c:"#99de2a"},"F3",{x:10.5},"F8"],
+[{y:-0.875,x:2.5},"F2",{x:1},"F4",{x:8.5},"F7",{x:1},"F9"],
+[{y:-0.875,x:5.5},"F5",{c:"#ff4444"},"Esc",{x:4.5,c:"#bbddbb"},"_\n\n\n\n\n\n-",{c:"#99de2a"},"F6"],
+[{y:-0.875,c:"#c6c600",w:1.5},"Shift\n\n\n\n\n\nLock",{c:"#99de2a"},"F1",{x:14.5},"F10",{c:"#c6c600",w:1.5},"\n\nShift\n\n\n\n\nLock"],
+[{y:-0.375,x:3.5,c:"#bbddbb"},"{",{x:10.5,c:"#89b087"},"8"],
+[{y:-0.875,x:2.5,c:"#bbddbb"},"@",{x:1},"}",{x:8.5,c:"#89b087"},"7",{x:1},"9"],
+[{y:-0.875,x:5.5,c:"#bbddbb"},"&",{h:1.5},"<",{x:4.5,h:1.5},">","|"],
+[{y:-0.875,c:"#c6c600",t:"#002299",w:1.5},"Media\n\n\n\n\n\nShift",{c:"#bbddbb",t:"#000000"},"!",{x:14.5,c:"#89b087"},"/",{c:"#c6c600",t:"#002299",w:1.5},"\n\nMedia\n\n\n\n\nShift"],
+[{y:-0.375,x:3.5,c:"#bbddbb",t:"#000000"},"(",{x:10.5,c:"#89b087"},"5"],
+[{y:-0.875,x:2.5,c:"#bbddbb"},"$",{x:1},")",{x:8.5,c:"#89b087"},"4",{x:1},"6"],
+[{y:-0.875,x:5.5,c:"#bbddbb"},"`",{x:6.5},"/"],
+[{y:-0.875,c:"#000000",t:"#007d00",w:1.5},"Symbols\n\n\n\n\n\nShift",{c:"#bbddbb",t:"#000000"},"#",{x:14.5,c:"#89b087"},"*",{c:"#000000",t:"#007d00",w:1.5},"\n\nSymbols\n\n\n\n\nShift"],
+[{y:-0.625,x:6.5,c:"#bbddbb",t:"#000000",a:6,h:1.5},"'",{x:4.5,h:1.5},"\""],
+[{y:-0.75,x:3.5,a:4},"[",{x:10.5,c:"#89b087"},"2"],
+[{y:-0.875,x:2.5,c:"#bbddbb"},"^",{x:1},"]",{x:8.5,c:"#89b087"},"1",{x:1},"3"],
+[{y:-0.875,x:5.5,c:"#bbddbb"},"~",{x:6.5},"\\"],
+[{y:-0.875,c:"#c6c600",t:"#9e0000",w:1.5},"Capitals\n\n\n\n\n\nShift",{c:"#bbddbb",t:"#000000"},"%",{x:14.5,c:"#89b087"},"-",{c:"#c6c600",t:"#9e0000",w:1.5},"\n\nCapitals\n\n\n\n\nShift"],
+[{y:-0.375,x:3.5,c:"#bbddbb",t:"#000000"},"<",{x:10.5,c:"#89b087"},"."],
+[{y:-0.875,x:2.5,c:"#bbddbb"},"*",{x:1},">",{x:8.5,c:"#89b087"},"0",{x:1},"="],
+[{y:-0.75,x:0.5,c:"#bbddbb"},";","&",{x:14.5,c:"#89b087"},"+","Enter"],
+[{r:30,rx:6.5,ry:4.25,y:-1,x:1,c:"#bbddbb"},"<=",">="],
+[{a:7,h:2},"+",{h:2},"=",{c:"#737373"},""],
+[{x:2,c:"#bbddbb",a:4},"!="],
+[{r:-30,rx:13,y:-1,x:-3,c:"#737373",a:7},"",""],
+[{x:-3},"",{c:"#bbddbb",h:2},"_",{h:2},"-"],
+[{x:-3,a:4},"->"]
+

layouts/community/ergodox/ordinary_osx/readme.md

@@ -0,0 +1,3 @@
+# The Ordinary Layout for OSX #
+
+It is based on [Ordinary Layout](../ordinary/readme.md) with some keys re-mapped for OSX.

quantum/quantum.c

@@ -935,6 +935,11 @@ void backlight_task(void) {
 
 #ifdef BACKLIGHT_BREATHING
 
+#ifdef NO_BACKLIGHT_CLOCK
+void breathing_defaults(void) {}
+void breathing_intensity_default(void) {}
+#else
+
 #define BREATHING_NO_HALT  0
 #define BREATHING_HALT_OFF 1
 #define BREATHING_HALT_ON  2
@@ -1134,6 +1139,7 @@ ISR(TIMER1_COMPA_vect)
 
 }
 
+#endif // NO_BACKLIGHT_CLOCK
 #endif // breathing
 
 #else // backlight

tmk_core/common/action_layer.c

@@ -88,6 +88,16 @@ void layer_clear(void)
     layer_state_set(0);
 }
 
+bool layer_state_is(uint8_t layer)
+{
+    return layer_state_cmp(layer_state, layer);
+}
+
+bool layer_state_cmp(uint32_t cmp_layer_state, uint8_t layer) {
+    if (layer == 0) { return cmp_layer_state == 0; }
+    return (cmp_layer_state & (1UL<<layer)) > 0;
+}
+
 void layer_move(uint8_t layer)
 {
     layer_state_set(1UL<<layer);

tmk_core/common/action_layer.h

@@ -51,6 +51,8 @@ void default_layer_xor(uint32_t state);
 extern uint32_t layer_state;
 void layer_debug(void);
 void layer_clear(void);
+bool layer_state_is(uint8_t layer);
+bool layer_state_cmp(uint32_t layer1, uint8_t layer2);
 void layer_move(uint8_t layer);
 void layer_on(uint8_t layer);
 void layer_off(uint8_t layer);

users/drashna/drashna.c

@@ -19,6 +19,7 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #include "quantum.h"
 #include "action.h"
 #include "version.h"
+#include "sensitive.h"
 
 #ifdef TAP_DANCE_ENABLE
 //define diablo macro timer variables
@@ -78,6 +79,14 @@ qk_tap_dance_action_t tap_dance_actions[] = {
 };
 #endif
 
+#ifdef AUDIO_ENABLE
+float tone_qwerty[][2]       = SONG(QWERTY_SOUND);
+float tone_dvorak[][2]       = SONG(DVORAK_SOUND);
+float tone_colemak[][2]      = SONG(COLEMAK_SOUND);
+float tone_workman[][2]      = SONG(PLOVER_SOUND);
+float tone_hackstartup[][2]  = SONG(ONE_UP_SOUND);
+#endif
+
 
 // Add reconfigurable functions here, for keymap customization
 // This allows for a global, userspace functions, and continued
@@ -137,6 +146,11 @@ void matrix_init_user(void) {
     rgblight_set_red;
     rgblight_mode(5);
   }
+#endif
+#ifdef AUDIO_ENABLE
+//  _delay_ms(21); // gets rid of tick
+//  stop_all_notes();
+//  PLAY_SONG(tone_hackstartup);
 #endif
   matrix_init_keymap();
 }
@@ -190,13 +204,6 @@ void led_set_user(uint8_t usb_led) {
 }
 
 
-#ifdef AUDIO_ENABLE
-float tone_qwerty[][2]     = SONG(QWERTY_SOUND);
-float tone_dvorak[][2]     = SONG(DVORAK_SOUND);
-float tone_colemak[][2]    = SONG(COLEMAK_SOUND);
-float tone_workman[][2]    = SONG(PLOVER_SOUND);
-#endif
-
 
 void persistent_default_layer_set(uint16_t default_layer) {
   eeconfig_update_default_layer(default_layer);
@@ -427,28 +434,30 @@ bool process_record_user(uint16_t keycode, keyrecord_t *record) {
 #endif
   case KC_MAKE:
     if (!record->event.pressed) {
-      SEND_STRING("make " QMK_KEYBOARD ":" QMK_KEYMAP);
-#ifndef BOOTLOADER_CATERINA
-      SEND_STRING(":teensy ");
-#else
-      SEND_STRING(" ");
+      SEND_STRING("make " QMK_KEYBOARD ":" QMK_KEYMAP
+#if  (defined(BOOTLOADER_DFU) || defined(BOOTLOADER_LUFA_DFU) || defined(BOOTLOADER_QMK_DFU))
+       ":dfu"
+#elif defined(BOOTLOADER_HALFKAY)
+      ":teensy"
+#elif defined(BOOTLOADER_CATERINA)
+       ":avrdude"
 #endif
 #ifdef RGBLIGHT_ENABLE
-      SEND_STRING("RGBLIGHT_ENABLE=yes ");
+        " RGBLIGHT_ENABLE=yes"
 #else
-      SEND_STRING("RGBLIGHT_ENABLE=no ");
+        " RGBLIGHT_ENABLE=no"
 #endif
 #ifdef AUDIO_ENABLE
-      SEND_STRING("AUDIO_ENABLE=yes ");
+        " AUDIO_ENABLE=yes"
 #else
-      SEND_STRING("AUDIO_ENABLE=no ");
+        " AUDIO_ENABLE=no"
 #endif
 #ifdef FAUXCLICKY_ENABLE
-      SEND_STRING("FAUXCLICKY_ENABLE=yes ");
+        " FAUXCLICKY_ENABLE=yes"
 #else
-      SEND_STRING("FAUXCLICKY_ENABLE=no ");
+        " FAUXCLICKY_ENABLE=no" 
 #endif
-      SEND_STRING(SS_TAP(X_ENTER));
+        SS_TAP(X_ENTER));
     }
     return false;
     break;
@@ -475,33 +484,28 @@ bool process_record_user(uint16_t keycode, keyrecord_t *record) {
     }
     return false;
     break;
-  case KC_RGB_T:  // Because I want the option to go back to normal RGB mode rather than always layer indication
-    if (record->event.pressed) {
-      rgb_layer_change = !rgb_layer_change;
+  case KC_SECRET_1 ... KC_SECRET_5:
+    if (!record->event.pressed) {
+      send_string(secret[keycode - KC_SECRET_1]);
     }
     return false;
     break;
-  case RGB_MOD:
-  case RGB_SMOD:
-  case RGB_HUI:
-  case RGB_HUD:
-  case RGB_SAI:
-  case RGB_SAD:
-  case RGB_VAI:
-  case RGB_VAD:
-  case RGB_MODE_PLAIN:
-  case RGB_MODE_BREATHE:
-  case RGB_MODE_RAINBOW:
-  case RGB_MODE_SWIRL:
-  case RGB_MODE_SNAKE:
-  case RGB_MODE_KNIGHT:
-  case RGB_MODE_XMAS:
-  case RGB_MODE_GRADIENT:
+  case KC_RGB_T:  // Because I want the option to go back to normal RGB mode rather than always layer indication
+#ifdef RGBLIGHT_ENABLE
     if (record->event.pressed) {
+      rgb_layer_change = !rgb_layer_change;
+    }
+#endif
+    return false;
+    break;
+#ifdef RGBLIGHT_ENABLE
+  case RGB_MODE_FORWARD ... RGB_MODE_GRADIENT: // quantum_keycodes.h L400 for definitions
+    if (record->event.pressed) { //This disrables layer indication, as it's assumed that if you're changing this ... you want that disabled
       rgb_layer_change = false;
     }
     return true;
     break;
+#endif
   }
   return process_record_keymap(keycode, record);
 }

users/drashna/drashna.h

@@ -19,6 +19,7 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define USERSPACE
 
 #include "quantum.h"
+#include "song_list.h"
 
 // Define layer names 
 #define _QWERTY 0
@@ -86,6 +87,11 @@ enum userrpace_custom_keycodes {
   KC_MAKE,
   KC_RESET,
   KC_RGB_T,
+  KC_SECRET_1,
+  KC_SECRET_2,
+  KC_SECRET_3,
+  KC_SECRET_4,
+  KC_SECRET_5,
   NEW_SAFE_RANGE //use "NEWPLACEHOLDER for keymap specific codes
 };
 
@@ -99,6 +105,10 @@ enum {
 #endif
 
 
+#define QMK_KEYS_PER_SCAN 4
 
+#ifdef RGBLIGHT_ENABLE
+#define RGBLIGHT_SLEEP
+#endif
 
 #endif

users/drashna/sensitive.h

@@ -0,0 +1,8 @@
+const char secret[][64] = {
+  "test1",
+  "test2",
+  "test3",
+  "test4",
+  "test5"
+};
+

users/drashna/template.c

@@ -21,6 +21,8 @@ __attribute__ ((weak))
 uint32_t layer_state_set_keymap (uint32_t state) {
   return state;
 }
+__attribute__ ((weak))
+void led_set_keymap(uint8_t usb_led) {}
 
 // Call user matrix init, then call the keymap's init function
 void matrix_init_user(void) {
@@ -82,3 +84,7 @@ bool process_record_user(uint16_t keycode, keyrecord_t *record) {
 uint32_t layer_state_set_user (uint32_t state) {
   return layer_state_set_keymap (state);
 }
+
+void led_set_user(uint8_t usb_led) {
+   led_set_keymap(usb_led);
+}