Create info.json

Update info.json
Info json fixes (#2232 )
2018-01-06 01:27:49 -05:00 · 2018-01-05 16:28:46 -05:00 · 2018-01-05 15:44:59 -05:00 · 2018-01-05 15:33:15 -05:00 · 2018-01-05 15:32:52 -05:00 · 2018-01-05 11:50:28 -05:00
88 changed files with 3694 additions and 245 deletions
--- a/keyboards/acr60/config.h
+++ b/keyboards/acr60/config.h
@@ -5,11 +5,11 @@

 /* USB Device descriptor parameter */
 #define VENDOR_ID       0xFEED
-#define PRODUCT_ID      0x2260
+#define PRODUCT_ID      0xCA60
 #define DEVICE_VER      0x0001
-#define MANUFACTURER    MechKeysCa
+#define MANUFACTURER    MECHKEYS
 #define PRODUCT         ACR60
-#define DESCRIPTION     ACR60 Keyboard
+#define DESCRIPTION     60% customizable keyboard

 /* key matrix size */
 #define MATRIX_ROWS 5
--- a/keyboards/acr60/readme.md
+++ b/keyboards/acr60/readme.md
@@ -1,12 +1,15 @@
-# ACR60
+ACR60
+=====

 ![acr60](https://cdn.shopify.com/s/files/1/1697/5323/products/20170522001035_1024x1024.jpg?v=1504725199)

-A customizable 60% keyboard based on the DZ60.
+A customizable 60% keyboard made and sold by mechkeys.ca [More info on MECHKEYS](https://mechkeys.ca)
+
+Keyboard Maintainer: [TurboMech](https://github.com/TurboMech)

-Keyboard Maintainer: QMK Community  
 Hardware Supported: ACR60  
-Hardware Availability: [mechkeysca](https://mechkeys.ca/products/acr60)
+    
+Hardware Availability: [MECHKEYS](https://mechkeys.ca/products/acr60)

 Make example for this keyboard (after setting up your build environment):

--- a/keyboards/alu84/config.h
+++ b/keyboards/alu84/config.h
@@ -21,11 +21,11 @@

 /* USB Device descriptor parameter */
 #define VENDOR_ID       0xFEED
-#define PRODUCT_ID      0x6060
+#define PRODUCT_ID      0xCA75
 #define DEVICE_VER      0x0001
-#define MANUFACTURER    mechkeys.ca
+#define MANUFACTURER    MECHKEYS
 #define PRODUCT         ALU84
-#define DESCRIPTION     A 75% keyboard
+#define DESCRIPTION     75% keyboard

 /* key matrix size */
 #define MATRIX_ROWS 6
@@ -73,4 +73,4 @@

 #endif

-#endif
+#endif
--- a/keyboards/alu84/keymaps/turbomech/config.h
+++ b/keyboards/alu84/keymaps/turbomech/config.h
--- a/keyboards/alu84/keymaps/turbomech/keymap.c
+++ b/keyboards/alu84/keymaps/turbomech/keymap.c
@@ -102,12 +102,6 @@ const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) {
 	return MACRO_NONE;
 };

-	switch (id) {
-
-	}
-	return MACRO_NONE;
-}
-


 void matrix_scan_user(void) {
--- a/keyboards/alu84/keymaps/turbomech/readme.md
+++ b/keyboards/alu84/keymaps/turbomech/readme.md
--- a/keyboards/alu84/keymaps/turbomech/rules.mk
+++ b/keyboards/alu84/keymaps/turbomech/rules.mk
--- a/keyboards/alu84/readme.md
+++ b/keyboards/alu84/readme.md
@@ -1,11 +1,15 @@
 ALU84
 ===

-A 75% keyboard kit made and sold by mechkeys.ca [More info on mechkeys.ca](https://mechkeys.ca)
+![alu84](https://i.imgur.com/wBfazDc.jpg)
+
+A 75% keyboard made and sold by MECHKEYS [More info on MECHKEYS](https://mechkeys.ca).

 Keyboard Maintainer: [TurboMech](https://github.com/TurboMech)
+
 Hardware Supported: ALU84
-Hardware Availability: [mechkeys.ca](https://mechkeys.ca)
+
+Hardware Availability: [MECHKEYS](https://mechkeys.ca)

 Make example for this keyboard (after setting up your build environment):

--- a/keyboards/chimera_ortho/info.json
+++ b/keyboards/chimera_ortho/info.json
@@ -0,0 +1,247 @@
+{
+  "keyboard_name": "",
+  "manufacturer": "",
+  "identifier": "",
+  "url": "",
+  "maintainer": "qmk",
+  "processor": "",
+  "bootloader": "",
+  "width": 15.5,
+  "height": 4.25,
+  "layouts": {
+    "KEYMAP": {
+      "layout": [
+        {
+          "label": "Esc",
+          "x": 0,
+          "y": 0
+        },
+        {
+          "label": "Q",
+          "x": 1,
+          "y": 0
+        },
+        {
+          "label": "W",
+          "x": 2,
+          "y": 0
+        },
+        {
+          "label": "E",
+          "x": 3,
+          "y": 0
+        },
+        {
+          "label": "R",
+          "x": 4,
+          "y": 0
+        },
+        {
+          "label": "T",
+          "x": 5,
+          "y": 0
+        },
+        {
+          "label": "{",
+          "x": 6,
+          "y": 0
+        },
+        {
+          "label": "}",
+          "x": 8.5,
+          "y": 0
+        },
+        {
+          "label": "Y",
+          "x": 9.5,
+          "y": 0
+        },
+        {
+          "label": "U",
+          "x": 10.5,
+          "y": 0
+        },
+        {
+          "label": "I",
+          "x": 11.5,
+          "y": 0
+        },
+        {
+          "label": "O",
+          "x": 12.5,
+          "y": 0
+        },
+        {
+          "label": "P",
+          "x": 13.5,
+          "y": 0
+        },
+        {
+          "label": "\"",
+          "x": 14.5,
+          "y": 0
+        },
+        {
+          "label": "Tab",
+          "x": 0,
+          "y": 1
+        },
+        {
+          "label": "A",
+          "x": 1,
+          "y": 1
+        },
+        {
+          "label": "S",
+          "x": 2,
+          "y": 1
+        },
+        {
+          "label": "D",
+          "x": 3,
+          "y": 1
+        },
+        {
+          "label": "F",
+          "x": 4,
+          "y": 1
+        },
+        {
+          "label": "G",
+          "x": 5,
+          "y": 1
+        },
+        {
+          "label": "-",
+          "x": 6,
+          "y": 1
+        },
+        {
+          "label": "1",
+          "x": 8.5,
+          "y": 1
+        },
+        {
+          "label": "H",
+          "x": 9.5,
+          "y": 1
+        },
+        {
+          "label": "J",
+          "x": 10.5,
+          "y": 1
+        },
+        {
+          "label": "K",
+          "x": 11.5,
+          "y": 1
+        },
+        {
+          "label": "L",
+          "x": 12.5,
+          "y": 1
+        },
+        {
+          "label": ";",
+          "x": 13.5,
+          "y": 1
+        },
+        {
+          "label": "Enter",
+          "x": 14.5,
+          "y": 1
+        },
+        {
+          "label": "(",
+          "x": 0,
+          "y": 2
+        },
+        {
+          "label": "Z",
+          "x": 1,
+          "y": 2
+        },
+        {
+          "label": "X",
+          "x": 2,
+          "y": 2
+        },
+        {
+          "label": "C",
+          "x": 3,
+          "y": 2
+        },
+        {
+          "label": "V",
+          "x": 4,
+          "y": 2
+        },
+        {
+          "label": "B",
+          "x": 5,
+          "y": 2
+        },
+        {
+          "label": "=",
+          "x": 6,
+          "y": 2
+        },
+        {
+          "label": "8",
+          "x": 8.5,
+          "y": 2
+        },
+        {
+          "label": "N",
+          "x": 9.5,
+          "y": 2
+        },
+        {
+          "label": "M",
+          "x": 10.5,
+          "y": 2
+        },
+        {
+          "label": ",",
+          "x": 11.5,
+          "y": 2
+        },
+        {
+          "label": ".",
+          "x": 12.5,
+          "y": 2
+        },
+        {
+          "label": "/",
+          "x": 13.5,
+          "y": 2
+        },
+        {
+          "label": ")",
+          "x": 14.5,
+          "y": 2
+        },
+        {
+          "label": "Num Layer",
+          "x": 4,
+          "y": 3.25
+        },
+        {
+          "label": "Back Space",
+          "x": 5,
+          "y": 3.25
+        },
+        {
+          "label": "Space",
+          "x": 9.5,
+          "y": 3.25
+        },
+        {
+          "label": "Symbol Layer",
+          "x": 10.5,
+          "y": 3.25
+        }
+      ]
+    }
+  }
+}
--- a/keyboards/eagle_viper/eagle_viper.c
+++ b/keyboards/eagle_viper/eagle_viper.c
@@ -0,0 +1 @@
+#include "eagle_viper.h"
--- a/keyboards/eagle_viper/eagle_viper.h
+++ b/keyboards/eagle_viper/eagle_viper.h
@@ -0,0 +1,10 @@
+#ifndef EAGLE_VIPER_H
+#define EAGLE_VIPER_H
+
+#include "quantum.h"
+
+#ifdef KEYBOARD_eagle_viper_v2
+    #include "v2.h"
+#endif
+
+#endif
--- a/keyboards/eagle_viper/info.json
+++ b/keyboards/eagle_viper/info.json
@@ -0,0 +1,13 @@
+{
+    "keyboard_name": "Eagle/Viper", 
+    "manufacturer": "Duck", 
+    "processor": "atmega32u4", 
+    "bootloader": "atmel-dfu", 
+    "width": 15, 
+    "height": 5, 
+    "layouts": {
+        "KEYMAP": {
+            "layout": [{"x":0, "y":0}, {"x":1, "y":0}, {"x":2, "y":0}, {"x":3, "y":0}, {"x":4, "y":0}, {"x":5, "y":0}, {"x":6, "y":0}, {"x":7, "y":0}, {"x":8, "y":0}, {"x":9, "y":0}, {"x":10, "y":0}, {"x":11, "y":0}, {"x":12, "y":0}, {"x":13, "y":0}, {"x":14, "y":0}, {"x":0.5, "y":1, "w":1.5}, {"x":1.5, "y":1}, {"x":2.5, "y":1}, {"x":3.5, "y":1}, {"x":4.5, "y":1}, {"x":5.5, "y":1}, {"x":6.5, "y":1}, {"x":7.5, "y":1}, {"x":8.5, "y":1}, {"x":9.5, "y":1}, {"x":10.5, "y":1}, {"x":11.5, "y":1}, {"x":12.5, "y":1}, {"x":14, "y":1, "w":1.5}, {"x":0.75, "y":2, "w":1.75}, {"x":1.75, "y":2}, {"x":2.75, "y":2}, {"x":3.75, "y":2}, {"x":4.75, "y":2}, {"x":5.75, "y":2}, {"x":6.75, "y":2}, {"x":7.75, "y":2}, {"x":8.75, "y":2}, {"x":9.75, "y":2}, {"x":10.75, "y":2}, {"x":11.75, "y":2}, {"x":14, "y":2, "w":2.25}, {"x":1.25, "y":3, "w":2.25}, {"x":2.25, "y":3}, {"x":3.25, "y":3}, {"x":4.25, "y":3}, {"x":5.25, "y":3}, {"x":6.25, "y":3}, {"x":7.25, "y":3}, {"x":8.25, "y":3}, {"x":9.25, "y":3}, {"x":10.25, "y":3}, {"x":11.25, "y":3}, {"x":13, "y":3, "w":1.75}, {"x":14, "y":3}, {"x":0.25, "y":4, "w":1.25}, {"x":1.5, "y":4, "w":1.25}, {"x":2.75, "y":4, "w":1.25}, {"x":9, "y":4, "w":6.25}, {"x":10.25, "y":4, "w":1.25}, {"x":11.5, "y":4, "w":1.25}, {"x":12.75, "y":4, "w":1.25}, {"x":14, "y":4, "w":1.25}]
+        }
+    }
+}
--- a/keyboards/eagle_viper/readme.md
+++ b/keyboards/eagle_viper/readme.md
@@ -0,0 +1,12 @@
+# Duck Eagle/Viper
+
+Non official firmware for custom Korean keyboard with 60% key layout made by Duck.
+
+See [build environment setup](https://docs.qmk.fm/build_environment_setup.html) then the [make instructions](https://docs.qmk.fm/make_instructions.html) for more information.
+
+Newest version is the [Eagle/Viper V2](http://duck0113.tistory.com/127)
+
+Make example for this keyboard (after setting up your build environment):
+
+    make eagle_viper/v2:default
+
--- a/keyboards/eagle_viper/rules.mk
+++ b/keyboards/eagle_viper/rules.mk
@@ -0,0 +1 @@
+DEFAULT_FOLDER = eagle_viper/v2
--- a/keyboards/eagle_viper/v2/config.h
+++ b/keyboards/eagle_viper/v2/config.h
@@ -0,0 +1,54 @@
+/*
+Copyright 2017 MechMerlin <mechmerlin@gmail.com>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#ifndef CONFIG_H
+#define CONFIG_H
+
+#include "config_common.h"
+
+/* USB Device descriptor parameter */
+#define VENDOR_ID       0xFEED
+#define PRODUCT_ID      0x6050
+#define DEVICE_VER      0x0104
+#define MANUFACTURER    Duck
+#define PRODUCT         Eagle/Viper V2
+#define DESCRIPTION     60% Korean custom keyboard
+
+/* key matrix size */
+#define MATRIX_ROWS 5
+#define MATRIX_COLS 15
+
+#define DIODE_DIRECTION COL2ROW
+
+/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
+#define DEBOUNCING_DELAY 5
+
+/* number of backlight levels */
+#define BACKLIGHT_LEVELS 3
+
+/* key combination for magic key command */
+#define IS_COMMAND() ( \
+    keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
+)
+
+#define RGBLIGHT_ANIMATIONS
+#define RGB_DI_PIN D6
+#define RGBLED_NUM 17
+
+#define TAPPING_TERM 200
+
+#endif
--- a/keyboards/eagle_viper/v2/indicator_leds.c
+++ b/keyboards/eagle_viper/v2/indicator_leds.c
@@ -0,0 +1,89 @@
+/*
+Copyright 2017 MechMerlin <mechmerlin@gmail.com>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+#include <avr/interrupt.h>
+#include <avr/io.h>
+#include <stdbool.h>
+#include <util/delay.h>
+#include "indicator_leds.h"
+
+#define RES 6000
+
+#define LED_T1H	600
+#define LED_T1L 650
+#define LED_T0H 250
+#define LED_T0L 1000
+
+#define NS_PER_SEC (1000000000L)
+#define CYCLES_PER_SEC (F_CPU)
+#define NS_PER_CYCLE (NS_PER_SEC / CYCLES_PER_SEC)
+#define NS_TO_CYCLES(n) ((n) / NS_PER_CYCLE)
+
+void send_bit_d4(bool bitVal) {
+  if(bitVal) {
+    asm volatile (
+        "sbi %[port], %[bit] \n\t"
+        ".rept %[onCycles] \n\t"
+        "nop \n\t"
+        ".endr \n\t"
+        "cbi %[port], %[bit] \n\t"
+        ".rept %[offCycles] \n\t"
+        "nop \n\t"
+        ".endr \n\t"
+        ::
+        [port]      "I" (_SFR_IO_ADDR(PORTD)),
+        [bit]       "I" (4),
+        [onCycles]  "I" (NS_TO_CYCLES(LED_T1H) - 2),
+        [offCycles] "I" (NS_TO_CYCLES(LED_T1L) - 2));
+  } else {
+    asm volatile (
+        "sbi %[port], %[bit] \n\t"
+        ".rept %[onCycles] \n\t"
+        "nop \n\t"
+        ".endr \n\t"
+        "cbi %[port], %[bit] \n\t"
+        ".rept %[offCycles] \n\t"
+        "nop \n\t"
+        ".endr \n\t"
+        ::
+        [port]      "I" (_SFR_IO_ADDR(PORTD)),
+        [bit]       "I" (4),
+        [onCycles]  "I" (NS_TO_CYCLES(LED_T0H) - 2),
+        [offCycles] "I" (NS_TO_CYCLES(LED_T0L) - 2));
+  }
+}
+
+void show(void) {
+  _delay_us((RES / 1000UL) + 1);
+}
+
+void send_value(uint8_t byte) {
+  for(uint8_t b = 0; b < 8; b++) {
+    send_bit_d4(byte & 0b10000000);
+    byte <<= 1;
+  }
+}
+
+// Send the LED indicators to the WS2811S chips
+void indicator_leds_set(bool leds[8]) {
+  uint8_t led_cnt;
+
+  cli();
+  for(led_cnt = 0; led_cnt < 8; led_cnt++)
+    send_value(leds[led_cnt] ? 255 : 0);
+  sei();
+  show();
+}
--- a/keyboards/eagle_viper/v2/indicator_leds.h
+++ b/keyboards/eagle_viper/v2/indicator_leds.h
@@ -0,0 +1,2 @@
+void indicator_leds_set(bool leds[8]);
+void show(void);
--- a/keyboards/eagle_viper/v2/keymaps/default/keymap.c
+++ b/keyboards/eagle_viper/v2/keymaps/default/keymap.c
@@ -0,0 +1,37 @@
+/* Copyright 2017 MechMerlin <mechmerlin@gmail.com>
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#include "eagle_viper.h"
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+    /* layer 0: qwerty */
+    [0] = KEYMAP(\
+        KC_GRV,  KC_1,    KC_2,   KC_3,   KC_4,   KC_5,   KC_6,   KC_7,   KC_8,   KC_9,    KC_0,    KC_MINS, KC_EQL,  KC_NO, KC_BSPC,
+        KC_TAB,  KC_Q,    KC_W,   KC_E,   KC_R,   KC_T,   KC_Y,   KC_U,   KC_I,   KC_O,    KC_P,    KC_LBRC, KC_RBRC, KC_BSLS,
+        KC_CAPS, KC_A,    KC_S,   KC_D,   KC_F,   KC_G,   KC_H,   KC_J,   KC_K,   KC_L,    KC_SCLN, KC_QUOT, KC_NO,   KC_ENT,
+        KC_LSFT, KC_NO,   KC_Z,   KC_X,   KC_C,   KC_V,   KC_B,   KC_N,   KC_M,   KC_COMM, KC_DOT,  KC_SLSH, KC_RSFT, KC_NO,
+        KC_LCTL, KC_LGUI, KC_LALT,                KC_SPC,                                  MO(1),   KC_NO,   KC_RALT, KC_RGUI, KC_RCTL),
+
+    [1] = KEYMAP(\
+        KC_TRNS, RGB_TOG, RGB_MOD, RGB_VAI, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+        KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, RESET,   KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+        KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+        KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+        KC_TRNS, KC_TRNS, KC_TRNS,          KC_TRNS,          KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS),
+        };
+
+const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) {
+  return MACRO_NONE;
+};
--- a/keyboards/eagle_viper/v2/keymaps/default/readme.md
+++ b/keyboards/eagle_viper/v2/keymaps/default/readme.md
@@ -0,0 +1,10 @@
+# Default Eagle Layout
+
+This is the default implement layout for Duck Eagle V2.
+
+![Duck Eagle V2 Default Layout](https://imgur.com/mWBY3Dc.png)
+
+
+## Features
+
+* Default QWERTY layer
--- a/keyboards/eagle_viper/v2/keymaps/mechmerlin/keymap.c
+++ b/keyboards/eagle_viper/v2/keymaps/mechmerlin/keymap.c
@@ -0,0 +1,44 @@
+/* Copyright 2017 MechMerlin <mechmerlin@gmail.com>
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#include "eagle_viper.h"
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+    /* layer 0: qwerty */
+    [0] = KEYMAP(\
+        KC_GESC, KC_1,    KC_2,   KC_3,   KC_4,   KC_5,   KC_6,   KC_7,   KC_8,   KC_9,    KC_0,    KC_MINS, KC_EQL,  KC_NO, KC_BSPC,
+        KC_TAB,  KC_Q,    KC_W,   KC_E,   KC_R,   KC_T,   KC_Y,   KC_U,   KC_I,   KC_O,    KC_P,    KC_LBRC, KC_RBRC, KC_BSLS,
+        KC_LCTL, KC_A,    KC_S,   KC_D,   KC_F,   KC_G,   KC_H,   KC_J,   KC_K,   KC_L,    KC_SCLN, KC_QUOT, KC_NO,   KC_ENT,
+        KC_LSFT, KC_NO,   KC_Z,   KC_X,   KC_C,   KC_V,   KC_B,   KC_N,   KC_M,   KC_COMM, KC_DOT,  KC_SLSH, KC_RSFT, KC_NO,
+        KC_LCTL, KC_LGUI, KC_LALT,                KC_SPC,                                  MO(1),   KC_NO,   KC_RALT, KC_RGUI, KC_RCTL),
+
+    [1] = KEYMAP(\
+        KC_TRNS, KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,  KC_TRNS, KC_DEL,
+        RGB_TOG, RGB_MOD, RGB_VAI, KC_TRNS, RESET,   KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_PGUP, KC_TRNS, KC_TRNS,
+        KC_CAPS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_HOME, KC_END, KC_TRNS, KC_TRNS,
+        KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_MUTE, KC_VOLD, KC_VOLU, KC_PGDN, KC_TRNS, KC_TRNS,
+        KC_TRNS, KC_TRNS, KC_TRNS,                TG(2),                                 KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS),
+
+    [2] = KEYMAP(\
+        KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+        KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+        KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+        KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_UP, KC_TRNS,
+        KC_TRNS, KC_TRNS, KC_TRNS,          KC_TRNS,          KC_TRNS, KC_NO,   KC_LEFT, KC_DOWN, KC_RIGHT),
+        };
+
+const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) {
+  return MACRO_NONE;
+};
--- a/keyboards/eagle_viper/v2/keymaps/mechmerlin/readme.md
+++ b/keyboards/eagle_viper/v2/keymaps/mechmerlin/readme.md
@@ -0,0 +1,15 @@
+MechMerlin's Duck Eagle V2 Layout
+======================
+
+This is the preferred 60% layout used by u/merlin36, host of the MechMerlin YouTube channel.
+
+![Duck Eagle V2 Layout](https://imgur.com/FRcsmJc.png)
+
+## Keymap Notes
+- Highly influenced by the KBP V60 and WKL B.Face standard layouts
+- Does not support any form of inswitch lighting as Merlin hates them.
+- Arrow toggle switch is FN + Space
+- Reset is FN + R
+
+### Build
+To build this keymap, simply run `make eagle_viper/v2:mechmerlin` from the qmk_firmware directory.
--- a/keyboards/eagle_viper/v2/keymaps/profanum429/keymap.c
+++ b/keyboards/eagle_viper/v2/keymaps/profanum429/keymap.c
@@ -0,0 +1,40 @@
+/* Copyright 2017 MechMerlin <mechmerlin@gmail.com>
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#include "eagle_viper.h"
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+    /* layer 0: qwerty */
+    [0] = KEYMAP(\
+        KC_ESC,  KC_1,    KC_2,   KC_3,   KC_4,   KC_5,   KC_6,   KC_7,   KC_8,   KC_9,    KC_0,    KC_MINS, KC_EQL,  KC_BSLS, KC_GRV,
+        KC_TAB,  KC_Q,    KC_W,   KC_E,   KC_R,   KC_T,   KC_Y,   KC_U,   KC_I,   KC_O,    KC_P,    KC_LBRC, KC_RBRC,          KC_BSPC,
+        KC_LCTL, KC_A,    KC_S,   KC_D,   KC_F,   KC_G,   KC_H,   KC_J,   KC_K,   KC_L,    KC_SCLN, KC_QUOT, KC_NO,            KC_ENT,
+        KC_LSFT, KC_NO,   KC_Z,   KC_X,   KC_C,   KC_V,   KC_B,   KC_N,   KC_M,   KC_COMM, KC_DOT,  KC_SLSH, KC_RSFT, MO(1),
+        KC_NO,   KC_LGUI, KC_LALT,                KC_SPC,                                  KC_NO,   KC_NO,   KC_RALT, KC_RGUI, KC_NO),
+ 
+    [1] = KEYMAP(\
+        KC_TRNS, KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_F7,   KC_F8,   KC_F9,   KC_F10,   KC_F11,   KC_F12,  KC_INS, KC_DEL,
+        KC_CAPS, RGB_TOG, RGB_MOD, RGB_VAI, RESET,   KC_TRNS, KC_TRNS, KC_TRNS, KC_PSCR, KC_SLCK, KC_PAUS,  KC_UP,    KC_TRNS, KC_BSPC,
+        KC_TRNS, KC_VOLU, KC_VOLD, KC_MUTE, KC_TRNS, KC_TRNS, KC_PAST, KC_PSLS, KC_HOME, KC_PGUP, KC_LEFT,  KC_RIGHT, KC_TRNS, KC_ENT,
+        KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_PPLS, KC_PMNS, KC_END,  KC_PGDN,  KC_DOWN,  KC_TRNS, KC_TRNS,
+        KC_TRNS, KC_TRNS, KC_TRNS,          KC_TRNS,          KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS),
+        };
+
+const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) {
+  return MACRO_NONE;
+};
+
+
+
--- a/keyboards/eagle_viper/v2/keymaps/profanum429/readme.md
+++ b/keyboards/eagle_viper/v2/keymaps/profanum429/readme.md
@@ -0,0 +1,5 @@
+# Profanum429 Duck Viper V2 Layout
+TODO
+
+## Features
+TODO
--- a/keyboards/eagle_viper/v2/matrix.c
+++ b/keyboards/eagle_viper/v2/matrix.c
@@ -0,0 +1,266 @@
+/*
+Copyright 2017 MechMerlin <mechmerlin@gmail.com>
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#include <util/delay.h>
+#include <avr/io.h>
+#include <stdio.h>
+#include "matrix.h"
+#include "util.h"
+#include "print.h"
+#include "debug.h"
+
+static uint8_t debouncing = DEBOUNCING_DELAY;
+
+/* matrix state(1:on, 0:off) */
+static matrix_row_t matrix[MATRIX_ROWS];
+static matrix_row_t matrix_debouncing[MATRIX_ROWS];
+
+static uint8_t read_rows(uint8_t col);
+static void init_rows(void);
+static void unselect_cols(void);
+static void select_col(uint8_t col);
+
+__attribute__ ((weak))
+void matrix_init_quantum(void) {
+    matrix_init_kb();
+}
+
+__attribute__ ((weak))
+void matrix_scan_quantum(void) {
+    matrix_scan_kb();
+}
+
+__attribute__ ((weak))
+void matrix_init_kb(void) {
+    matrix_init_user();
+}
+
+__attribute__ ((weak))
+void matrix_scan_kb(void) {
+    matrix_scan_user();
+}
+
+__attribute__ ((weak))
+void matrix_init_user(void) {
+}
+
+__attribute__ ((weak))
+void matrix_scan_user(void) {
+}
+
+void backlight_init_ports(void)
+{
+  DDRD  |=  0b11010000;
+  PORTD &= ~0b01010000;
+  PORTD |=  0b10000000;
+  DDRB  |=  0b00011111;
+  PORTB &= ~0b00001110;
+  PORTB |=  0b00010001;
+  DDRE  |=  0b01000000;
+  PORTE &= ~0b01000000;
+}
+
+void matrix_init(void) {
+  backlight_init_ports();
+  unselect_cols();
+  init_rows();
+
+  for (uint8_t i=0; i < MATRIX_ROWS; i++)  {
+    matrix[i] = 0;
+    matrix_debouncing[i] = 0;
+  }
+
+  matrix_init_quantum();
+}
+
+uint8_t matrix_scan(void) {
+  for (uint8_t col = 0; col < MATRIX_COLS; col++) {
+    select_col(col);
+    _delay_us(3);
+
+    uint8_t rows = read_rows(col);
+
+    for (uint8_t row = 0; row < MATRIX_ROWS; row++) {
+      bool prev_bit = matrix_debouncing[row] & ((matrix_row_t)1<<col);
+      bool curr_bit = rows & (1<<row);
+      if (prev_bit != curr_bit) {
+        matrix_debouncing[row] ^= ((matrix_row_t)1<<col);
+        debouncing = DEBOUNCING_DELAY;
+      }
+    }
+    unselect_cols();
+  }
+
+  if (debouncing) {
+    if (--debouncing) {
+      _delay_ms(1);
+    } else {
+      for (uint8_t i = 0; i < MATRIX_ROWS; i++) {
+        matrix[i] = matrix_debouncing[i];
+      }
+    }
+  }
+
+  matrix_scan_quantum();
+  return 1;
+}
+
+inline matrix_row_t matrix_get_row(uint8_t row) {
+  return matrix[row];
+}
+
+void matrix_print(void) {
+  print("\nr/c 0123456789ABCDEF\n");
+  for (uint8_t row = 0; row < MATRIX_ROWS; row++) {
+    xprintf("%02X: %032lb\n", row, bitrev32(matrix_get_row(row)));
+  }
+}
+
+/* Row pin configuration
+ * row: 0    1    2    3    4    5
+ * pin: PB7  PD0  PD1  PD2  PD3  PD5
+ *
+ * Esc uses its own pin PE2
+ */
+static void init_rows(void) {
+    DDRD  &= ~0b00101111;
+    PORTD &= ~0b00101111;
+
+    DDRB  &= ~0b10000000;
+    PORTB &= ~0b10000000;
+
+    DDRE  &= ~0b00000100;
+    PORTE |=  0b00000100;
+}
+
+static uint8_t read_rows(uint8_t col) {
+
+    return (PIND&(1<<0) ? (1<<0) : 0) |
+            (PIND&(1<<1) ? (1<<1) : 0) |
+            (PIND&(1<<2) ? (1<<2) : 0) |
+            (PIND&(1<<3) ? (1<<3) : 0) |
+            (PIND&(1<<5) ? (1<<4) : 0) |
+            (PINB&(1<<7) ? (1<<5) : 0) |
+            (col==0 ? ((PINE&(1<<2) ? 0 : (1<<2))) : 0);
+    
+}
+
+uint8_t read_fwkey(void)
+{
+  return PINE&(1<<2) ? 0 : (1<<2);
+}
+
+/* Columns 0 - 15
+ * These columns uses two 74HC237D 3 to 8 bit demultiplexers.
+ * col / pin:    PC6  PB6  PF0  PF1  PC7
+ * 0:             1    0    0    0    0
+ * 1:             1    0    1    0    0
+ * 2:             1    0    0    1    0
+ * 3:             1    0    1    1    0
+ * 4:             1    0    0    0    1
+ * 5:             1    0    1    0    1
+ * 6:             1    0    0    1    1
+ * 7:             1    0    1    1    1
+ * 8:             0    1    0    0    0
+ * 9:             0    1    1    0    0
+ * 10:            0    1    0    1    0
+ * 11:            0    1    1    1    0
+ * 12:            0    1    0    0    1
+ * 13:            0    1    1    0    1
+ * 14:            0    1    0    1    1
+ * 15:            0    1    1    1    1
+ *
+ */
+static void unselect_cols(void) {
+  DDRB  |=  0b01000000;
+  PORTB &= ~0b01000000;
+
+  DDRC  |=  0b11000000;
+  PORTC &= ~0b11000000;
+
+  DDRF  |=  0b00000011;
+  PORTF &= ~0b00000011;
+}
+
+static void select_col(uint8_t col) {
+ 
+   switch (col) {
+        case 0:
+            PORTC |= 0b01000000;
+            break;
+        case 1:
+            PORTC |= 0b01000000;
+            PORTF |= 0b00000001;
+            break;
+        case 2:
+            PORTC |= 0b01000000;
+            PORTF |= 0b00000010;
+            break;
+        case 3:
+            PORTC |= 0b01000000;
+            PORTF |= 0b00000011;
+            break;
+        case 4:
+            PORTC |= 0b11000000;
+            break;
+        case 5:
+            PORTC |= 0b11000000;
+            PORTF |= 0b00000001;
+            break;
+        case 6:
+            PORTC |= 0b11000000;
+            PORTF |= 0b00000010;
+            break;
+        case 7:
+            PORTC |= 0b11000000;
+            PORTF |= 0b00000011;
+            break;
+        case 8:
+            PORTB |= 0b01000000;
+            break;
+        case 9:
+            PORTB |= 0b01000000;
+            PORTF |= 0b00000001;
+            break;
+        case 10:
+            PORTB |= 0b01000000;
+            PORTF |= 0b00000010;
+            break;
+        case 11:
+            PORTB |= 0b01000000;
+            PORTF |= 0b00000011;
+            break;
+        case 12:
+            PORTB |= 0b01000000;
+            PORTC |= 0b10000000;
+            break;
+        case 13:
+            PORTB |= 0b01000000;
+            PORTF |= 0b00000001;
+            PORTC |= 0b10000000;
+            break;
+        case 14:
+            PORTB |= 0b01000000;
+            PORTF |= 0b00000010;
+            PORTC |= 0b10000000;
+            break;
+        case 15:
+            PORTB |= 0b01000000;
+            PORTF |= 0b00000011;
+            PORTC |= 0b10000000;
+            break;
+    }
+}
--- a/keyboards/eagle_viper/v2/readme.md
+++ b/keyboards/eagle_viper/v2/readme.md
@@ -0,0 +1,30 @@
+# Duck Eagle/Viper V2
+
+Non official firmware for custom Korean keyboard with 60% key layout made by Duck.  
+Group buy was run November 2016 via [geekhack](https://geekhack.org/index.php?topic=86087.0) with 100 keyboards total. 
+
+Keyboard Maintainer: [MechMerlin](https://github.com/mechmerlin)  
+Hardware Supported: Duck Eagle/Viper PCB Ver 2.0, Atmega32u4  
+Hardware Availability: Wait until GB of the next revision
+
+Make example for this keyboard (after setting up your build environment):
+
+    make eagle_viper/v2:default
+
+See [build environment setup](https://docs.qmk.fm/build_environment_setup.html) then the [make instructions](https://docs.qmk.fm/make_instructions.html) for more information.
+
+## Hardware Notes
+
+The Duck Eagle/Viper V2 PCB consists of:
+
+### Microchips
+2 74HC237D 3-to-8 line decoders
+1 Atmega32u4 microcontroller
+2 WS2811 LED controller
+
+## Notes
+Thanks to Ralf Schmitt for previous implementations in his [TMK fork](https://github.com/xauser/tmk_keyboard/tree/xauser/) and few helping words.
+
+Based heavily on Rasmus Schults [Duck Lightsaver QMK Port](https://github.com/qmk/qmk_firmware/tree/master/keyboards/lightsaver)
+
+Special thanks to profanum429 for debugging help and contributions to support the Viper and LED indicators. 
--- a/keyboards/eagle_viper/v2/rules.mk
+++ b/keyboards/eagle_viper/v2/rules.mk
@@ -0,0 +1,72 @@
+# MCU name
+MCU = atmega32u4
+
+# Processor frequency.
+#     This will define a symbol, F_CPU, in all source code files equal to the
+#     processor frequency in Hz. You can then use this symbol in your source code to
+#     calculate timings. Do NOT tack on a 'UL' at the end, this will be done
+#     automatically to create a 32-bit value in your source code.
+#
+#     This will be an integer division of F_USB below, as it is sourced by
+#     F_USB after it has run through any CPU prescalers. Note that this value
+#     does not *change* the processor frequency - it should merely be updated to
+#     reflect the processor speed set externally so that the code can use accurate
+#     software delays.
+F_CPU = 16000000
+
+
+#
+# LUFA specific
+#
+# Target architecture (see library "Board Types" documentation).
+ARCH = AVR8
+
+# Input clock frequency.
+#     This will define a symbol, F_USB, in all source code files equal to the
+#     input clock frequency (before any prescaling is performed) in Hz. This value may
+#     differ from F_CPU if prescaling is used on the latter, and is required as the
+#     raw input clock is fed directly to the PLL sections of the AVR for high speed
+#     clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
+#     at the end, this will be done automatically to create a 32-bit value in your
+#     source code.
+#
+#     If no clock division is performed on the input clock inside the AVR (via the
+#     CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
+F_USB = $(F_CPU)
+
+# Interrupt driven control endpoint task(+60)
+#OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
+
+
+# Boot Section Size in *bytes*
+#   Teensy halfKay   512
+#   Teensy++ halfKay 1024
+#   Atmel DFU loader 4096
+#   LUFA bootloader  4096
+#   USBaspLoader     2048
+OPT_DEFS += -DBOOTLOADER_SIZE=4096
+
+
+# Build Options
+#   change yes to no to disable
+#
+BOOTMAGIC_ENABLE ?= no       # Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE ?= no        # Mouse keys(+4700)
+EXTRAKEY_ENABLE ?= yes       # Audio control and System control(+450)
+CONSOLE_ENABLE ?= no         # Console for debug(+400)
+COMMAND_ENABLE ?= yes        # Commands for debug and configuration
+# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
+SLEEP_LED_ENABLE ?= no       # Breathing sleep LED during USB suspend
+# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+NKRO_ENABLE ?= yes           # USB Nkey Rollover
+BACKLIGHT_ENABLE ?= yes      # Enable keyboard backlight functionality on B7 by default
+MIDI_ENABLE ?= no            # MIDI support (+2400 to 4200, depending on config)
+UNICODE_ENABLE ?= no         # Unicode
+BLUETOOTH_ENABLE ?= no       # Enable Bluetooth with the Adafruit EZ-Key HID
+AUDIO_ENABLE ?= no           # Audio output on port C6
+FAUXCLICKY_ENABLE ?= no      # Use buzzer to emulate clicky switches
+RGBLIGHT_ENABLE = yes
+
+CUSTOM_MATRIX = yes
+SRC += indicator_leds.c \
+			 matrix.c
--- a/keyboards/eagle_viper/v2/v2.c
+++ b/keyboards/eagle_viper/v2/v2.c
@@ -0,0 +1,65 @@
+/* Copyright 2017 MechMerlin <mechmerlin@gmail.com>
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#include "v2.h"
+#include "indicator_leds.h"
+
+enum BACKLIGHT_AREAS {
+  BACKLIGHT_ALPHAS   = 0b00000010,
+  BACKLIGHT_MODNUM   = 0b00001000
+};
+
+void backlight_set(uint8_t level) {
+  switch(level) {
+  case 0:
+    PORTB |= BACKLIGHT_ALPHAS;
+    PORTB |= BACKLIGHT_MODNUM;
+  break;
+  case 1:
+    PORTB &= ~BACKLIGHT_ALPHAS;
+    PORTB |= BACKLIGHT_MODNUM;
+  break;
+  case 2:
+    PORTB |= BACKLIGHT_ALPHAS;
+    PORTB &= ~BACKLIGHT_MODNUM;
+  break;
+  case 3:
+    PORTB &= ~BACKLIGHT_ALPHAS;
+    PORTB &= ~BACKLIGHT_MODNUM;
+  break;
+  }
+}
+
+// Port from backlight_update_state
+void led_set_kb(uint8_t usb_led) {
+    bool status[8] = {
+    host_keyboard_leds() & (1<<USB_LED_SCROLL_LOCK), /* LED 3 */
+    host_keyboard_leds() & (1<<USB_LED_CAPS_LOCK),   /* LED 2 */
+    host_keyboard_leds() & (1<<USB_LED_NUM_LOCK),    /* LED 1 */
+
+    layer_state & (1<<2),                            /* LED 6 */
+    layer_state & (1<<1),                            /* LED 5 */
+    layer_state & (1<<0) ? 0: 1,                     /* LED 4 */
+
+    layer_state & (1<<5),                            /* LED 8 */
+    layer_state & (1<<4)                             /* LED 7 */
+  };
+
+  indicator_leds_set(status);
+}
+
+bool process_record_kb(uint16_t keycode, keyrecord_t *record) {
+  return process_record_user(keycode, record);
+}
--- a/keyboards/eagle_viper/v2/v2.h
+++ b/keyboards/eagle_viper/v2/v2.h
@@ -0,0 +1,34 @@
+/* Copyright 2017 MechMerlin <mechmerlin@gmail.com>
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#ifndef V2_H
+#define V2_H
+
+#include "../eagle_viper.h"
+
+#define KEYMAP( \
+    K4A, K4B, K4C, K4D, K4E, K4F, K4G, K4H, K4I, K4J, K4K, K4L, K4M, K4N, K4O, \
+    K3A, K3B, K3C, K3D, K3E, K3F, K3G, K3H, K3I, K3J, K3K, K3L, K3M,      K3O, \
+    K2A, K2B, K2C, K2D, K2E, K2F, K2G, K2H, K2I, K2J, K2K, K2L, K2M,      K2O, \
+    K1A, K1B, K1C, K1D, K1E, K1F, K1G, K1H, K1I, K1J, K1K,      K1M, K1N, K1O, \
+    K0A, K0B, K0C,                               K0J, K0K, K0L, K0M, K0N, K0O \
+) { \
+  { K4A, K4B, K4C, K4D,   K4E,   K4F,   K4G,   K4H,   K4I,   K4J,   K4K, K4L,   K4M, K4N,   K4O,   }, \
+  { K3A, K3B, K3C, K3D,   K3E,   K3F,   K3G,   K3H,   K3I,   K3J,   K3K, K3L,   K3M, KC_NO, K3O,   }, \
+  { K2A, K2B, K2C, K2D,   K2E,   K2F,   K2G,   K2H,   K2I,   K2J,   K2K, K2L,   K2M, KC_NO, K2O,   }, \
+  { K1A, K1B, K1C, K1D,   K1E,   K1F,   K1G,   K1H,   K1I,   K1J,   K1K, KC_NO, K1M, K1N,   K1O,   }, \
+  { K0A, K0B, K0C, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, K0J,   KC_NO, K0K, K0L,   K0M, K0N,   K0O    }  \
+}
+#endif
--- a/keyboards/gh60/info.json
+++ b/keyboards/gh60/info.json
@@ -1,9 +1,9 @@
 {
    "keyboard_name": "GH60", 
    "identifier": "FEED:6060:0001", 
-    "layout": {
+    "layouts": {
        "LAYOUT_60_ansi": {
-            "layout": [{"x":0, "y":0, "label":"~"}, {"x":1, "y":0, "label":"!"}, {"x":2, "y":0, "label":"@"}, {"x":3, "y":0, "label":"#"}, {"x":4, "y":0, "label":"$"}, {"x":5, "y":0, "label":"%"}, {"x":6, "y":0, "label":"^"}, {"x":7, "y":0, "label":"&"}, {"x":8, "y":0, "label":"*"}, {"x":9, "y":0, "label":"("}, {"x":10, "y":0, "label":")"}, {"x":11, "y":0, "label":"_"}, {"x":12, "y":0, "label":"+"}, {"x":14, "y":0, "label":"Backspace", "w":2}, {"x":0.5, "y":1, "label":"Tab", "w":1.5}, {"x":1.5, "y":1, "label":"Q"}, {"x":2.5, "y":1, "label":"W"}, {"x":3.5, "y":1, "label":"E"}, {"x":4.5, "y":1, "label":"R"}, {"x":5.5, "y":1, "label":"T"}, {"x":6.5, "y":1, "label":"Y"}, {"x":7.5, "y":1, "label":"U"}, {"x":8.5, "y":1, "label":"I"}, {"x":9.5, "y":1, "label":"O"}, {"x":10.5, "y":1, "label":"P"}, {"x":11.5, "y":1, "label":"{"}, {"x":12.5, "y":1, "label":"}"}, {"x":14, "y":1, "label":"|", "w":1.5}, {"x":0.75, "y":2, "label":"Caps Lock", "w":1.75}, {"x":1.75, "y":2, "label":"A"}, {"x":2.75, "y":2, "label":"S"}, {"x":3.75, "y":2, "label":"D"}, {"x":4.75, "y":2, "label":"F"}, {"x":5.75, "y":2, "label":"G"}, {"x":6.75, "y":2, "label":"H"}, {"x":7.75, "y":2, "label":"J"}, {"x":8.75, "y":2, "label":"K"}, {"x":9.75, "y":2, "label":"L"}, {"x":10.75, "y":2, "label":":"}, {"x":11.75, "y":2, "label":"\""}, {"x":14, "y":2, "label":"Enter", "w":2.25}, {"x":1.25, "y":3, "label":"Shift", "w":2.25}, {"x":2.25, "y":3, "label":"Z"}, {"x":3.25, "y":3, "label":"X"}, {"x":4.25, "y":3, "label":"C"}, {"x":5.25, "y":3, "label":"V"}, {"x":6.25, "y":3, "label":"B"}, {"x":7.25, "y":3, "label":"N"}, {"x":8.25, "y":3, "label":"M"}, {"x":9.25, "y":3, "label":"<"}, {"x":10.25, "y":3, "label":">"}, {"x":11.25, "y":3, "label":"?"}, {"x":14, "y":3, "label":"Shift", "w":2.75}, {"x":0.25, "y":4, "label":"Ctrl", "w":1.25}, {"x":1.5, "y":4, "label":"Win", "w":1.25}, {"x":2.75, "y":4, "label":"Alt", "w":1.25}, {"x":9, "y":4, "w":6.25}, {"x":10.25, "y":4, "label":"Alt", "w":1.25}, {"x":11.5, "y":4, "label":"Win", "w":1.25}, {"x":12.75, "y":4, "label":"Menu", "w":1.25}, {"x":14, "y":4, "label":"Ctrl", "w":1.25}]
+            "layout": [{"x":0, "y":0, "label":"~"}, {"x":1, "y":0, "label":"!"}, {"x":2, "y":0, "label":"@"}, {"x":3, "y":0, "label":"#"}, {"x":4, "y":0, "label":"$"}, {"x":5, "y":0, "label":"%"}, {"x":6, "y":0, "label":"^"}, {"x":7, "y":0, "label":"&"}, {"x":8, "y":0, "label":"*"}, {"x":9, "y":0, "label":"("}, {"x":10, "y":0, "label":")"}, {"x":11, "y":0, "label":"_"}, {"x":12, "y":0, "label":"+"}, {"x":13, "y":0, "label":"Backspace", "w":2}, {"x":0, "y":1, "label":"Tab", "w":1.5}, {"x":1.5, "y":1, "label":"Q"}, {"x":2.5, "y":1, "label":"W"}, {"x":3.5, "y":1, "label":"E"}, {"x":4.5, "y":1, "label":"R"}, {"x":5.5, "y":1, "label":"T"}, {"x":6.5, "y":1, "label":"Y"}, {"x":7.5, "y":1, "label":"U"}, {"x":8.5, "y":1, "label":"I"}, {"x":9.5, "y":1, "label":"O"}, {"x":10.5, "y":1, "label":"P"}, {"x":11.5, "y":1, "label":"{"}, {"x":12.5, "y":1, "label":"}"}, {"x":13.5, "y":1, "label":"|", "w":1.5}, {"x":0, "y":2, "label":"Caps Lock", "w":1.75}, {"x":1.75, "y":2, "label":"A"}, {"x":2.75, "y":2, "label":"S"}, {"x":3.75, "y":2, "label":"D"}, {"x":4.75, "y":2, "label":"F"}, {"x":5.75, "y":2, "label":"G"}, {"x":6.75, "y":2, "label":"H"}, {"x":7.75, "y":2, "label":"J"}, {"x":8.75, "y":2, "label":"K"}, {"x":9.75, "y":2, "label":"L"}, {"x":10.75, "y":2, "label":":"}, {"x":11.75, "y":2, "label":"\""}, {"x":12.75, "y":2, "label":"Enter", "w":2.25}, {"x":0, "y":3, "label":"Shift", "w":2.25}, {"x":2.25, "y":3, "label":"Z"}, {"x":3.25, "y":3, "label":"X"}, {"x":4.25, "y":3, "label":"C"}, {"x":5.25, "y":3, "label":"V"}, {"x":6.25, "y":3, "label":"B"}, {"x":7.25, "y":3, "label":"N"}, {"x":8.25, "y":3, "label":"M"}, {"x":9.25, "y":3, "label":"<"}, {"x":10.25, "y":3, "label":">"}, {"x":11.25, "y":3, "label":"?"}, {"x":12.25, "y":3, "label":"Shift", "w":2.75}, {"x":0, "y":4, "label":"Ctrl", "w":1.25}, {"x":1.25, "y":4, "label":"Win", "w":1.25}, {"x":2.5, "y":4, "label":"Alt", "w":1.25}, {"x":3.75, "y":4, "w":6.25}, {"x":10, "y":4, "label":"Alt", "w":1.25}, {"x":11.25, "y":4, "label":"Win", "w":1.25}, {"x":12.5, "y":4, "label":"Menu", "w":1.25}, {"x":13.75, "y":4, "label":"Ctrl", "w":1.25}]
        }
    }, 
    "maintainer": "qmk", 
@@ -14,4 +14,4 @@
    "height": 5, 
    "url": "http://qmk.fm/keyboards/gh60", 
    "manufacturer": "geekhack"
-}
+}
--- a/keyboards/kc60/info.json
+++ b/keyboards/kc60/info.json
@@ -0,0 +1,13 @@
+{
+    "keyboard_name": "KC60", 
+    "manufacturer": "NKPC", 
+    "processor": "atmega32u4", 
+    "bootloader": "atmel-dfu", 
+    "width": 15, 
+    "height": 5, 
+    "layouts": {
+        "KEYMAP": {
+            "layout": [{"x":0, "y":0}, {"x":1, "y":0}, {"x":2, "y":0}, {"x":3, "y":0}, {"x":4, "y":0}, {"x":5, "y":0}, {"x":6, "y":0}, {"x":7, "y":0}, {"x":8, "y":0}, {"x":9, "y":0}, {"x":10, "y":0}, {"x":11, "y":0}, {"x":12, "y":0}, {"x":14, "y":0, "w":2}, {"x":0.5, "y":1, "w":1.5}, {"x":1.5, "y":1}, {"x":2.5, "y":1}, {"x":3.5, "y":1}, {"x":4.5, "y":1}, {"x":5.5, "y":1}, {"x":6.5, "y":1}, {"x":7.5, "y":1}, {"x":8.5, "y":1}, {"x":9.5, "y":1}, {"x":10.5, "y":1}, {"x":11.5, "y":1}, {"x":12.5, "y":1}, {"x":14, "y":1, "w":1.5}, {"x":0.75, "y":2, "w":1.75}, {"x":1.75, "y":2}, {"x":2.75, "y":2}, {"x":3.75, "y":2}, {"x":4.75, "y":2}, {"x":5.75, "y":2}, {"x":6.75, "y":2}, {"x":7.75, "y":2}, {"x":8.75, "y":2}, {"x":9.75, "y":2}, {"x":10.75, "y":2}, {"x":11.75, "y":2}, {"x":14, "y":2, "w":2.25}, {"x":1.25, "y":3, "w":2.25}, {"x":2.25, "y":3}, {"x":3.25, "y":3}, {"x":4.25, "y":3}, {"x":5.25, "y":3}, {"x":6.25, "y":3}, {"x":7.25, "y":3}, {"x":8.25, "y":3}, {"x":9.25, "y":3}, {"x":10.25, "y":3}, {"x":11.25, "y":3}, {"x":14, "y":3, "w":2.75}, {"x":0.25, "y":4, "w":1.25}, {"x":1.5, "y":4, "w":1.25}, {"x":2.75, "y":4, "w":1.25}, {"x":9, "y":4, "w":6.25}, {"x":10.25, "y":4, "w":1.25}, {"x":11.5, "y":4, "w":1.25}, {"x":12.75, "y":4, "w":1.25}, {"x":14, "y":4, "w":1.25}]
+        }
+    }
+}
--- a/keyboards/lets_split/info.json
+++ b/keyboards/lets_split/info.json
@@ -0,0 +1,16 @@
+{
+    "keyboard_name": "Let's Split", 
+    "manufacturer": "various", 
+    "identifier": "", 
+    "url": "", 
+    "maintainer": "qmk", 
+    "processor": "atmega32u4", 
+    "bootloader": "caterina", 
+    "width": 13, 
+    "height": 4, 
+    "layouts": {
+        "KEYMAP": {
+            "layout": [{"x":0, "y":0}, {"x":1, "y":0}, {"x":2, "y":0}, {"x":3, "y":0}, {"x":4, "y":0}, {"x":5, "y":0}, {"x":7, "y":0}, {"x":8, "y":0}, {"x":9, "y":0}, {"x":10, "y":0}, {"x":11, "y":0}, {"x":12, "y":0}, {"x":0, "y":1}, {"x":1, "y":1}, {"x":2, "y":1}, {"x":3, "y":1}, {"x":4, "y":1}, {"x":5, "y":1}, {"x":7, "y":1}, {"x":8, "y":1}, {"x":9, "y":1}, {"x":10, "y":1}, {"x":11, "y":1}, {"x":12, "y":1}, {"x":0, "y":2}, {"x":1, "y":2}, {"x":2, "y":2}, {"x":3, "y":2}, {"x":4, "y":2}, {"x":5, "y":2}, {"x":7, "y":2}, {"x":8, "y":2}, {"x":9, "y":2}, {"x":10, "y":2}, {"x":11, "y":2}, {"x":12, "y":2}, {"x":0, "y":3}, {"x":1, "y":3}, {"x":2, "y":3}, {"x":3, "y":3}, {"x":4, "y":3}, {"x":5, "y":3}, {"x":7, "y":3}, {"x":8, "y":3}, {"x":9, "y":3}, {"x":10, "y":3}, {"x":11, "y":3}, {"x":12, "y":3}]
+        }
+    }
+}
--- a/keyboards/lets_split/keymaps/default/keymap.c
+++ b/keyboards/lets_split/keymaps/default/keymap.c
@@ -34,7 +34,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
 * ,-----------------------------------------------------------------------------------.
 * | Esc  |   Q  |   W  |   E  |   R  |   T  |   Y  |   U  |   I  |   O  |   P  | Bksp |
 * |------+------+------+------+------+-------------+------+------+------+------+------|
- * | Tab  |   A  |   S  |   D  |   F  |   G  |   H  |   J  |   K  |   L  |   ;  |  "   |
+ * | Tab  |   A  |   S  |   D  |   F  |   G  |   H  |   J  |   K  |   L  |   ;  |  '   |
 * |------+------+------+------+------+------|------+------+------+------+------+------|
 * | Shift|   Z  |   X  |   C  |   V  |   B  |   N  |   M  |   ,  |   .  |   /  |Enter |
 * |------+------+------+------+------+------+------+------+------+------+------+------|
@@ -52,7 +52,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
 * ,-----------------------------------------------------------------------------------.
 * | Tab  |   Q  |   W  |   F  |   P  |   G  |   J  |   L  |   U  |   Y  |   ;  | Bksp |
 * |------+------+------+------+------+-------------+------+------+------+------+------|
- * | Esc  |   A  |   R  |   S  |   T  |   D  |   H  |   N  |   E  |   I  |   O  |  "   |
+ * | Esc  |   A  |   R  |   S  |   T  |   D  |   H  |   N  |   E  |   I  |   O  |  '   |
 * |------+------+------+------+------+------|------+------+------+------+------+------|
 * | Shift|   Z  |   X  |   C  |   V  |   B  |   K  |   M  |   ,  |   .  |   /  |Enter |
 * |------+------+------+------+------+------+------+------+------+------+------+------|
@@ -68,7 +68,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {

 /* Dvorak
 * ,-----------------------------------------------------------------------------------.
- * | Tab  |   "  |   ,  |   .  |   P  |   Y  |   F  |   G  |   C  |   R  |   L  | Bksp |
+ * | Tab  |   '  |   ,  |   .  |   P  |   Y  |   F  |   G  |   C  |   R  |   L  | Bksp |
 * |------+------+------+------+------+-------------+------+------+------+------+------|
 * | Esc  |   A  |   O  |   E  |   U  |   I  |   D  |   H  |   T  |   N  |   S  |  /   |
 * |------+------+------+------+------+------|------+------+------+------+------+------|
@@ -88,7 +88,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
 * ,-----------------------------------------------------------------------------------.
 * |   ~  |   !  |   @  |   #  |   $  |   %  |   ^  |   &  |   *  |   (  |   )  | Del  |
 * |------+------+------+------+------+-------------+------+------+------+------+------|
- * | Del  |  F1  |  F2  |  F3  |  F4  |  F5  |  F6  |   _  |   +  |     |    \  |  |   |
+ * | Del  |  F1  |  F2  |  F3  |  F4  |  F5  |  F6  |   _  |   +  |      |   \  |  |   |
 * |------+------+------+------+------+------|------+------+------+------+------+------|
 * |      |  F7  |  F8  |  F9  |  F10 |  F11 |  F12 |ISO ~ |ISO | |      |      |Enter |
 * |------+------+------+------+------+------+------+------+------+------+------+------|
--- a/keyboards/mechmini/config.h
+++ b/keyboards/mechmini/config.h
@@ -1,45 +1,28 @@
-/*
-Copyright 2017 Luiz Ribeiro <luizribeiro@gmail.com>
-
-This program is free software: you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation, either version 2 of the License, or
-(at your option) any later version.
-
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with this program.  If not, see <http://www.gnu.org/licenses/>.
+/* Copyright 2017 Luiz Ribeiro <luizribeiro@gmail.com>
+ * Copyright 2018 TurboMech /u/TurboMech <discord> @A9entOran9e#6134
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ *This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
 */
+
 #include "config_common.h"

 #ifndef CONFIG_H
 #define CONFIG_H

-#define VENDOR_ID       0x20A0
-#define PRODUCT_ID      0x422D
-// TODO: share these strings with usbconfig.h
-// Edit usbconfig.h to change these.
-#define MANUFACTURER    winkeyless.kr
-#define PRODUCT         mechmini
-
-/* matrix size */
-#define MATRIX_ROWS 8
-#define MATRIX_COLS 15
-
-#define NO_UART 1
-
-/* RGB underglow */
-// The RGB_DI_PIN value seems to be shared between all PS2AVRGB boards.
-// The same pin is used on the JJ40, at least.
-#define RGBLED_NUM 16
-#define RGBLIGHT_ANIMATIONS
-#define RGB_DI_PIN E2
-
-/* key combination for command */
-#define IS_COMMAND() (keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)))
+#define VENDOR_ID       0xFEED
+#define PRODUCT_ID      0xCA40
+#define MANUFACTURER    MECHKEYS
+#define PRODUCT         Mechmini
+#define DESCRIPTION     40% modular keyboard

 #endif
--- a/keyboards/mechmini/mechmini.c
+++ b/keyboards/mechmini/mechmini.c
@@ -1,46 +1,17 @@
-/*
-Copyright 2017 Luiz Ribeiro <luizribeiro@gmail.com>
-
-This program is free software: you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation, either version 2 of the License, or
-(at your option) any later version.
-
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with this program.  If not, see <http://www.gnu.org/licenses/>.
+/* Copyright 2017 Luiz Ribeiro <luizribeiro@gmail.com>
+ * Copyright 2018 TurboMech /u/TurboMech <discord> @A9entOran9e#6134
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ *This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
 */

 #include "mechmini.h"
-#include <avr/pgmspace.h>
-
-#include "action_layer.h"
-#include "i2c.h"
-#include "quantum.h"
-
-#include "rgblight.h"
-
-// custom RGB driver
-extern rgblight_config_t rgblight_config;
-void rgblight_set(void) {
-    if (!rgblight_config.enable) {
-        for (uint8_t i = 0; i < RGBLED_NUM; i++) {
-            led[i].r = 0;
-            led[i].g = 0;
-            led[i].b = 0;
-        }
-    }
-
-    i2c_init();
-    i2c_send(0xb0, (uint8_t*)led, 3 * RGBLED_NUM);
-}
-
-__attribute__ ((weak))
-void matrix_scan_user(void) {
-    rgblight_task();
-    /* add other tasks to be done on each matrix scan */
-}
--- a/keyboards/mechmini/mechmini.h
+++ b/keyboards/mechmini/mechmini.h
@@ -1,42 +1,30 @@
-/*
-Copyright 2017 Luiz Ribeiro <luizribeiro@gmail.com>
-
-This program is free software: you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation, either version 2 of the License, or
-(at your option) any later version.
-
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with this program.  If not, see <http://www.gnu.org/licenses/>.
+/* Copyright 2017 Luiz Ribeiro <luizribeiro@gmail.com>
+ * Copyright 2018 TurboMech /u/TurboMech <discord> @A9entOran9e#6134
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ *This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
 */

 #ifndef MECHMINI_H
 #define MECHMINI_H

-#include "keycode.h"
-#include "action.h"
 #include "quantum.h"

-#define KEYMAP( \
-    K03, K13, K23, K33, K43, K53, K26, KC6, KC7, K27, KA3, KB3, \
-    K02, K12, K22, K32, K42, K52, K36, KD6, KD7, K37, KA2, \
-    K01, K11, K21, K31, K41, K51, K46, KE6, KE7, K47, KA1, \
-    K00, K10, K20,      K56, K57, KB0,           KC0, K66  \
-) \
-{ \
-    { K00, K10, K20, K56, KC_NO,    K57,    KC_NO, KC_NO,    KB0, KC0, K66, KC_NO,    KC_NO,    KC_NO,    KC_NO }, \
-    { K01, K11, K21, K31, K41, K51, K46, KE6, KE7, K47, KA1, KC_NO,    KC_NO,    KC_NO,    KC_NO }, \
-    { K02, K12, K22, K32, K42, K52, K36, KD6, KD7, K37, KA2, KC_NO,    KC_NO,    KC_NO,    KC_NO }, \
-    { K03, K13, K23, K33, K43, K53, K26, KC6, KC7, K27, KA3, KB3, KC_NO,    KC_NO,    KC_NO }, \
-    { KC_NO,    KC_NO,    KC_NO,    KC_NO,    KC_NO,    KC_NO,    KC_NO,    KC_NO,    KC_NO,    KC_NO,    KC_NO,    KC_NO,    KC_NO,    KC_NO,    KC_NO }, \
-    { KC_NO,    KC_NO,    KC_NO,    KC_NO,    KC_NO,    KC_NO,    KC_NO,    KC_NO,    KC_NO,    KC_NO,    KC_NO,    KC_NO,    KC_NO,    KC_NO,    KC_NO }, \
-    { KC_NO,    KC_NO,    KC_NO,    KC_NO,    KC_NO,    KC_NO,    KC_NO,    KC_NO,    KC_NO,    KC_NO,    KC_NO,    KC_NO,    KC_NO,    KC_NO,    KC_NO }, \
-    { KC_NO,    KC_NO,    KC_NO,    KC_NO,    KC_NO,    KC_NO,    KC_NO,    KC_NO,    KC_NO,    KC_NO,    KC_NO,    KC_NO,    KC_NO,    KC_NO,    KC_NO } \
-}
+#ifdef KEYBOARD_mechmini_v1
+    #include "v1.h"
+#endif
+
+#ifdef KEYBOARD_mechmini_v2
+    #include "v2.h"
+#endif

 #endif
--- a/keyboards/mechmini/readme.md
+++ b/keyboards/mechmini/readme.md
@@ -1,13 +1,21 @@
-mechmini
+Mechmini
 ========

-A compact ortholinear/staggered keyboard.
+![mechmini](https://cdn.shopify.com/s/files/1/1697/5323/products/20495451_468333093530388_1648547540_o_grande.jpg?v=1510792821)

-Keyboard Maintainer: QMK Community  
-Hardware Supported: mechmini PCB  
-Hardware Availability: https://mechkeys.ca/collections/keyboards/products/mechmini-2-0-pcb
+A 40% compact ortholinear/staggered keyboard. 

-Make example for this keyboard (after setting up your build environment):
+Version 1 was originally bootmapper (ps2avrGB) and can be ported to QMK following the v1 readme (../mechmini/v1/readme.md).  This version is no longer in production.  
+
+Version 2 (Mechmini 2.0) was shipped powered by QMK [More info on MECHKEYS](https://mechkeys.ca).
+
+Keyboard Maintainer: QMK Community (version 1) & [TurboMech](https://github.com/TurboMech) (version 2 - aka Mechmini 2.0)
+
+Hardware Supported: Mechmini keyboard
+
+Hardware Availability: [MECHKEYS](https://mechkeys.ca/collections/keyboards/products/mechmini-2-0)
+
+Make example for this keyboard (after setting up your build environment), this will make the Mechmini 2.0 default keymap (split space) - please see v1 readme for v1 make instructions:

    make mechmini:default

@@ -15,50 +23,6 @@ See [build environment setup](https://docs.qmk.fm/build_environment_setup.html)

 ## Mechmini Notes

-Note that this is a complete replacement for the firmware, so you won't be
-using Bootmapper Client to change any keyboard settings, since not all the
-USB report options are supported.
+There are 2 versions of the Mechmini keyboard.  Please read the readme for the version you have for make instructions.

-## Installing

-First, install the requirements. These commands are for OSX, but all you
-need is the AVR toolchain and `bootloadHID` for flashing:
-
-```
-$ brew cask install crosspack-avr
-$ brew install --HEAD https://raw.githubusercontent.com/robertgzr/homebrew-tap/master/bootloadhid.rb
-```
-
-In order to use the `./program` script, which can reboot the board into
-the bootloader, you'll need Python 2 with PyUSB installed:
-
-```
-$ pip install pyusb
-```
-
-Then, with the keyboard plugged in, simply run this command from the
-`qmk_firmware` directory:
-
-```
-$ make mechmini:program
-```
-
-If you prefer, you can just build it and flash the firmware directly with
-`bootloadHID` if you boot the board while holding down `L_Ctrl` to keep it
-in the bootloader:
-
-```
-$ make mechmini
-$ bootloadHID -r mechmini_default.hex
-```
-
-## Troubleshooting
-
-From my experience, it's really hard to brick these boards. But these
-tricks have been useful when it got stuck in a weird scenario.
-
-1. Try plugging the board in while pressing `L_Ctrl`. This will force it
-   to boot only the bootloader without loading the firmware. Once this is
-   done, just reflash the board with the original firmware.
-2. Sometimes USB hubs can act weird, so try connecting the board directly
-   to your computer or plugging/unplugging the USB hub.
--- a/keyboards/mechmini/rules.mk
+++ b/keyboards/mechmini/rules.mk
@@ -1,50 +1 @@
-# Copyright 2017 Luiz Ribeiro <luizribeiro@gmail.com>
-#
-# This program is free software: you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation, either version 2 of the License, or
-# (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program.  If not, see <http://www.gnu.org/licenses/>.
-
-# MCU name
-MCU = atmega32a
-PROTOCOL = VUSB
-
-# unsupported features for now
-NO_UART = yes
-NO_SUSPEND_POWER_DOWN = yes
-
-# processor frequency
-F_CPU = 12000000
-
-# Bootloader
-#     This definition is optional, and if your keyboard supports multiple bootloaders of
-#     different sizes, comment this out, and the correct address will be loaded 
-#     automatically (+60). See bootloader.mk for all options.
-BOOTLOADER = atmel-dfu
-
-# build options
-BOOTMAGIC_ENABLE = yes
-MOUSEKEY_ENABLE = yes
-EXTRAKEY_ENABLE = yes
-CONSOLE_ENABLE = yes
-COMMAND_ENABLE = yes
-BACKLIGHT_ENABLE = no
-RGBLIGHT_ENABLE = yes
-RGBLIGHT_CUSTOM_DRIVER = yes
-
-OPT_DEFS = -DDEBUG_LEVEL=0
-
-# custom matrix setup
-CUSTOM_MATRIX = yes
-SRC = matrix.c i2c.c
-
-# programming options
-PROGRAM_CMD = ./util/atmega32a_program.py $(TARGET).hex
+DEFAULT_FOLDER = mechmini/v2
--- a/keyboards/mechmini/v1/README.md
+++ b/keyboards/mechmini/v1/README.md
@@ -0,0 +1,83 @@
+Mechmini V1
+===========
+
+A 40% ortholinear/staggered keyboard, that was originally bootmapper and can be ported to QMK following this readme.  This version is no longer in production [More info on MECHKEYS](https://mechkeys.ca).
+
+Keyboard Maintainer: QMK Community 
+Hardware Supported: Mechmini 1 PCB  
+Hardware Availability: Version 1 (Bootmapper) no longer in production [MECHKEYS](https://mechkeys.ca)
+
+Make example for this keyboard (after setting up your build environment):
+
+    make mechmini/v1:default
+
+See [build environment setup](https://docs.qmk.fm/build_environment_setup.html) then the [make instructions](https://docs.qmk.fm/make_instructions.html) for more information.
+
+## Mechmini Notes
+
+Note that this is a complete replacement for the firmware, so you won't be
+using Bootmapper Client to change any keyboard settings, since not all the
+USB report options are supported.
+
+## Installing
+
+First, install the requirements. These commands are for OSX, but all you
+need is the AVR toolchain and `bootloadHID` for flashing:
+
+```
+$ brew cask install crosspack-avr
+$ brew install --HEAD https://raw.githubusercontent.com/robertgzr/homebrew-tap/master/bootloadhid.rb
+```
+
+In order to use the `./program` script, which can reboot the board into
+the bootloader, you'll need Python 2 with PyUSB installed:
+
+```
+$ pip install pyusb
+```
+
+Then, with the keyboard plugged in, simply run this command from the
+`qmk_firmware` directory:
+
+```
+$ make mechmini:program
+```
+
+If you prefer, you can just build it and flash the firmware directly with
+`bootloadHID` if you boot the board while holding down `L_Ctrl` to keep it
+in the bootloader:
+
+```
+$ make mechmini
+$ bootloadHID -r mechmini_default.hex
+```
+
+## Troubleshooting
+
+From my experience, it's really hard to brick these boards. But these
+tricks have been useful when it got stuck in a weird scenario.
+
+1. Try plugging the board in while pressing `L_Ctrl`. This will force it
+   to boot only the bootloader without loading the firmware. Once this is
+   done, just reflash the board with the original firmware.
+2. Sometimes USB hubs can act weird, so try connecting the board directly
+   to your computer or plugging/unplugging the USB hub.
+3. If errors happen with 
+`./tmk_core/common/avr/suspend.c` it is likely you implemented a RGB underglow sleep setting previously.  Simply comment out the following code found under `void suspend_wakeup_init(void)`:
+```
+ifdef RGBLIGHT_ANIMATIONS
+    rgblight_timer_enable();
+    _delay_ms(50);
+    rgblight_set();
+#endif
+```
+So that the resulting code should know reflect:
+```
+/*#ifdef RGBLIGHT_ANIMATIONS
+    rgblight_timer_enable();
+    _delay_ms(50);
+    rgblight_set();
+#endif*/
+```
+
+
--- a/keyboards/mechmini/v1/config.h
+++ b/keyboards/mechmini/v1/config.h
@@ -0,0 +1,48 @@
+/*
+Copyright 2017 Luiz Ribeiro <luizribeiro@gmail.com>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#ifndef V1_CONFIG_H
+#define V1_CONFIG_H
+
+#include "config_common.h"
+
+#define VENDOR_ID       0xFEED
+#define PRODUCT_ID      0xCA40
+#define DEVICE_VER      0x0001
+// TODO: share these strings with usbconfig.h
+// Edit usbconfig.h to change these.
+#define MANUFACTURER    MECHKEYS
+#define PRODUCT         Mechmini
+#define DESCRIPTION     40% modular keyboard
+
+/* matrix size */
+#define MATRIX_ROWS 8
+#define MATRIX_COLS 15
+
+#define NO_UART 1
+
+/* RGB underglow */
+// The RGB_DI_PIN value seems to be shared between all PS2AVRGB boards.
+// The same pin is used on the JJ40, at least.
+#define RGBLED_NUM 16
+#define RGBLIGHT_ANIMATIONS
+#define RGB_DI_PIN E2
+
+/* key combination for command */
+#define IS_COMMAND() (keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)))
+
+#endif
--- a/keyboards/mechmini/v1/i2c.c
+++ b/keyboards/mechmini/v1/i2c.c
--- a/keyboards/mechmini/v1/i2c.h
+++ b/keyboards/mechmini/v1/i2c.h
--- a/keyboards/mechmini/v1/keymaps/default/keymap.c
+++ b/keyboards/mechmini/v1/keymaps/default/keymap.c
--- a/keyboards/mechmini/v1/matrix.c
+++ b/keyboards/mechmini/v1/matrix.c
--- a/keyboards/mechmini/v1/rules.mk
+++ b/keyboards/mechmini/v1/rules.mk
@@ -0,0 +1,50 @@
+# Copyright 2017 Luiz Ribeiro <luizribeiro@gmail.com>
+#
+# This program is free software: you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation, either version 2 of the License, or
+# (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program.  If not, see <http://www.gnu.org/licenses/>.
+
+# MCU name
+MCU = atmega32a
+PROTOCOL = VUSB
+
+# unsupported features for now
+NO_UART = yes
+NO_SUSPEND_POWER_DOWN = yes
+
+# processor frequency
+F_CPU = 12000000
+
+# Bootloader
+#     This definition is optional, and if your keyboard supports multiple bootloaders of
+#     different sizes, comment this out, and the correct address will be loaded
+#     automatically (+60). See bootloader.mk for all options.
+BOOTLOADER = atmel-dfu
+
+# build options
+BOOTMAGIC_ENABLE = yes
+MOUSEKEY_ENABLE = yes
+EXTRAKEY_ENABLE = yes
+CONSOLE_ENABLE = yes
+COMMAND_ENABLE = yes
+BACKLIGHT_ENABLE = no
+RGBLIGHT_ENABLE = yes
+RGBLIGHT_CUSTOM_DRIVER = yes
+
+OPT_DEFS = -DDEBUG_LEVEL=0
+
+# custom matrix setup
+CUSTOM_MATRIX = yes
+SRC = matrix.c i2c.c
+
+# programming options
+PROGRAM_CMD = ./util/atmega32a_program.py $(TARGET).hex
--- a/keyboards/mechmini/v1/usbconfig.h
+++ b/keyboards/mechmini/v1/usbconfig.h
--- a/keyboards/mechmini/v1/v1.c
+++ b/keyboards/mechmini/v1/v1.c
@@ -0,0 +1,44 @@
+/*
+Copyright 2017 Luiz Ribeiro <luizribeiro@gmail.com>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#include "v1.h"
+#include <avr/pgmspace.h>
+#include "action_layer.h"
+#include "i2c.h"
+#include "quantum.h"
+#include "rgblight.h"
+
+// custom RGB driver
+extern rgblight_config_t rgblight_config;
+void rgblight_set(void) {
+    if (!rgblight_config.enable) {
+        for (uint8_t i = 0; i < RGBLED_NUM; i++) {
+            led[i].r = 0;
+            led[i].g = 0;
+            led[i].b = 0;
+        }
+    }
+
+    i2c_init();
+    i2c_send(0xb0, (uint8_t*)led, 3 * RGBLED_NUM);
+}
+
+__attribute__ ((weak))
+void matrix_scan_user(void) {
+    rgblight_task();
+     /* add other tasks to be done on each matrix scan */
+}
--- a/keyboards/mechmini/v1/v1.h
+++ b/keyboards/mechmini/v1/v1.h
@@ -0,0 +1,43 @@
+/*
+Copyright 2017 Luiz Ribeiro <luizribeiro@gmail.com>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#ifndef V1_H
+#define V2_H
+
+#include "../mechmini.h"
+#include "keycode.h"
+#include "action.h"
+#include "quantum.h"
+
+#define KEYMAP( \
+    K03, K13, K23, K33, K43, K53, K26, KC6, KC7, K27, KA3, KB3, \
+    K02, K12, K22, K32, K42, K52, K36, KD6, KD7, K37, KA2, \
+    K01, K11, K21, K31, K41, K51, K46, KE6, KE7, K47, KA1, \
+    K00, K10, K20,      K56, K57, KB0,           KC0, K66  \
+) \
+{ \
+    { K00, K10, K20, K56, KC_NO,    K57,    KC_NO, KC_NO,    KB0, KC0, K66, KC_NO,    KC_NO,    KC_NO,    KC_NO }, \
+    { K01, K11, K21, K31, K41, K51, K46, KE6, KE7, K47, KA1, KC_NO,    KC_NO,    KC_NO,    KC_NO }, \
+    { K02, K12, K22, K32, K42, K52, K36, KD6, KD7, K37, KA2, KC_NO,    KC_NO,    KC_NO,    KC_NO }, \
+    { K03, K13, K23, K33, K43, K53, K26, KC6, KC7, K27, KA3, KB3, KC_NO,    KC_NO,    KC_NO }, \
+    { KC_NO,    KC_NO,    KC_NO,    KC_NO,    KC_NO,    KC_NO,    KC_NO,    KC_NO,    KC_NO,    KC_NO,    KC_NO,    KC_NO,    KC_NO,    KC_NO,    KC_NO }, \
+    { KC_NO,    KC_NO,    KC_NO,    KC_NO,    KC_NO,    KC_NO,    KC_NO,    KC_NO,    KC_NO,    KC_NO,    KC_NO,    KC_NO,    KC_NO,    KC_NO,    KC_NO }, \
+    { KC_NO,    KC_NO,    KC_NO,    KC_NO,    KC_NO,    KC_NO,    KC_NO,    KC_NO,    KC_NO,    KC_NO,    KC_NO,    KC_NO,    KC_NO,    KC_NO,    KC_NO }, \
+    { KC_NO,    KC_NO,    KC_NO,    KC_NO,    KC_NO,    KC_NO,    KC_NO,    KC_NO,    KC_NO,    KC_NO,    KC_NO,    KC_NO,    KC_NO,    KC_NO,    KC_NO } \
+}
+
+#endif
--- a/keyboards/mechmini/v2/README.md
+++ b/keyboards/mechmini/v2/README.md
@@ -0,0 +1,22 @@
+Mechmini 2.0
+============
+
+A 40% compact ortholinear/staggered keyboard. 
+
+Version 2 (Mechmini 2.0) was shipped powered by QMK [More info on MECHKEYS](https://mechkeys.ca).
+
+Keyboard Maintainer: [TurboMech](https://github.com/TurboMech)
+
+Hardware Supported: Mechmini 2.0 keyboard
+
+Hardware Availability: [MECHKEYS Mechmini 2.0](https://mechkeys.ca/collections/keyboards/products/mechmini-2-0)
+
+Make example for this keyboard (after setting up your build environment), this will make the Mechmini 2.0 default keymap (split space):
+
+    make mechmini/v2:default
+
+See [build environment setup](https://docs.qmk.fm/build_environment_setup.html) then the [make instructions](https://docs.qmk.fm/make_instructions.html) for more information.
+
+## Mechmini Notes
+
+There are 2 versions of the Mechmini keyboard.  Please read the readme for the version you have for make instructions.
--- a/keyboards/mechmini/v2/config.h
+++ b/keyboards/mechmini/v2/config.h
@@ -0,0 +1,77 @@
+/* Copyright 2018 TurboMech /u/TurboMech <discord> @A9entOran9e#6134
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ *This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+#ifndef V2_CONFIG_H
+#define V2_CONFIG_H
+
+#include "config_common.h"
+
+
+/* USB Device descriptor parameter */
+#define VENDOR_ID       0xFEED
+#define PRODUCT_ID      0xCA40
+#define DEVICE_VER      0x0002
+#define MANUFACTURER    MECHKEYS
+#undef PRODUCT
+#define PRODUCT         Mechmini 2
+#undef DESCRIPTION
+#define DESCRIPTION     40% modular keyboard
+
+/* key matrix size */
+#undef MATRIX_COLS
+#undef MATRIX_ROWS
+#define MATRIX_ROWS 4
+#define MATRIX_COLS 12
+
+/* key matrix pins */
+#define MATRIX_ROW_PINS { D0, D1, D2, D3 }
+#define MATRIX_COL_PINS { F0, F1, F4, F5, F6, F7, B3, B1, B0, D5, B7, C7 }
+#define UNUSED_PINS
+
+/* COL2ROW or ROW2COL */
+#define DIODE_DIRECTION COL2ROW
+
+/* number of backlight levels */
+#define BACKLIGHT_PIN B6
+#ifdef BACKLIGHT_PIN
+#define BACKLIGHT_LEVELS 3
+#endif
+
+/* Set 0 if debouncing isn't needed */
+#define DEBOUNCING_DELAY 5
+
+/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
+#define LOCKING_SUPPORT_ENABLE
+
+/* Locking resynchronize hack */
+#define LOCKING_RESYNC_ENABLE
+
+/* key combination for command */
+#define IS_COMMAND() ( \
+    keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
+)
+
+/* prevent stuck modifiers */
+#define PREVENT_STUCK_MODIFIERS
+
+#define RGB_DI_PIN E2
+#ifdef RGB_DI_PIN
+#define RGBLIGHT_ANIMATIONS
+#define RGBLED_NUM 14
+#define RGBLIGHT_HUE_STEP 8
+#define RGBLIGHT_SAT_STEP 8
+#define RGBLIGHT_VAL_STEP 8
+#endif
+
+#endif
--- a/keyboards/mechmini/v2/keymaps/2u_space_ortho/keymap.c
+++ b/keyboards/mechmini/v2/keymaps/2u_space_ortho/keymap.c
@@ -0,0 +1,124 @@
+#include "mechmini.h"
+
+#define _BL 0
+#define _FN1 1
+#define _FN2 2
+
+#define MODS_CTRL_MASK  (MOD_BIT(KC_LSHIFT)|MOD_BIT(KC_RSHIFT))
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+
+	[_BL] = KEYMAP_2U_SPACE_ORTHO(
+		F(0), KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_BSPC,
+		KC_TAB, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT,
+		KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_ENT,
+		KC_CAPS, KC_LCTL, KC_LALT, KC_LGUI, MO(1), KC_SPC, MO(2), KC_LEFT, KC_DOWN, KC_UP, KC_RGHT),
+
+	[_FN1] = KEYMAP_2U_SPACE_ORTHO(
+		KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_BSPC,
+		KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_LBRC, KC_RBRC, KC_MINS, KC_EQL, KC_BSLS, KC_DEL,
+		KC_TRNS, KC_TRNS, KC_TRNS, M(1), M(1), KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_HOME, KC_END, KC_TRNS,
+		KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_MNXT, KC_VOLD, KC_VOLU, KC_MPLY),
+
+	[_FN2] = KEYMAP_2U_SPACE_ORTHO(
+		KC_PWR, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_TRNS,
+		KC_TRNS, BL_TOGG, BL_STEP, BL_INC, BL_DEC, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_DEL,
+		KC_TRNS, RGB_TOG, RGB_MOD, RGB_VAI, RGB_VAD, RGB_HUI, RGB_HUD, RGB_SAI, RGB_SAD, KC_HOME, KC_END, KC_TRNS,
+		RESET, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_MNXT, KC_PGDN, KC_PGUP, KC_MPLY),
+
+};
+
+const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) {
+
+
+	switch (id) {
+		case 1:
+			if (record->event.pressed) {
+				return MACRO( D(LCTL), T(C), U(LCTL), END );
+			}
+			break;
+		case 2:
+			if (record->event.pressed) {
+				return MACRO( D(LCTL), T(V), U(LCTL), END );
+			}
+			break;
+	}
+	return MACRO_NONE;
+}
+
+void matrix_init_user(void) {
+}
+
+void matrix_scan_user(void) {
+}
+
+bool process_record_user(uint16_t keycode, keyrecord_t *record) {
+	return true;
+}
+
+void led_set_user(uint8_t usb_led) {
+
+	if (usb_led & (1 << USB_LED_NUM_LOCK)) {
+
+	} else {
+
+	}
+
+	if (usb_led & (1 << USB_LED_CAPS_LOCK)) {
+
+	} else {
+
+	}
+
+	if (usb_led & (1 << USB_LED_SCROLL_LOCK)) {
+
+	} else {
+
+	}
+
+	if (usb_led & (1 << USB_LED_COMPOSE)) {
+
+	} else {
+
+	}
+
+	if (usb_led & (1 << USB_LED_KANA)) {
+
+	} else {
+
+	}
+
+}
+
+enum function_id {
+    SHIFT_ESC,
+};
+
+const uint16_t PROGMEM fn_actions[] = {
+  [0]  = ACTION_FUNCTION(SHIFT_ESC),
+};
+
+void action_function(keyrecord_t *record, uint8_t id, uint8_t opt) {
+  static uint8_t shift_esc_shift_mask;
+  switch (id) {
+    case SHIFT_ESC:
+      shift_esc_shift_mask = get_mods()&MODS_CTRL_MASK;
+      if (record->event.pressed) {
+        if (shift_esc_shift_mask) {
+          add_key(KC_GRV);
+          send_keyboard_report();
+        } else {
+          add_key(KC_ESC);
+          send_keyboard_report();
+        }
+      } else {
+        if (shift_esc_shift_mask) {
+          del_key(KC_GRV);
+          send_keyboard_report();
+        } else {
+          del_key(KC_ESC);
+          send_keyboard_report();
+        }
+      }
+      break;
+  }
+}
--- a/keyboards/mechmini/v2/keymaps/625_space/keymap.c
+++ b/keyboards/mechmini/v2/keymaps/625_space/keymap.c
@@ -0,0 +1,116 @@
+#include "mechmini.h"
+
+#define _BL 0
+#define _FN1 1
+#define _FN2 2
+
+#define MODS_CTRL_MASK  (MOD_BIT(KC_LSHIFT)|MOD_BIT(KC_RSHIFT))
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+
+	[_BL] = KEYMAP_625_SPACE(
+		F(0), KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_BSPC,
+		KC_TAB, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_ENT,
+		KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_LSFT, KC_DOT,
+		KC_LCTL, KC_LALT, KC_LGUI, KC_SPC, MO(1), MO(2)),
+
+	[_FN1] = KEYMAP_625_SPACE(
+		KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_DEL,
+		KC_TRNS, KC_PGUP, KC_VOLU, KC_TRNS, KC_TRNS, KC_TRNS, KC_LBRC, KC_RBRC, KC_MINS, KC_EQL, KC_TRNS,
+		KC_LSFT, KC_PGDN, KC_VOLD, KC_TRNS, KC_TRNS, KC_TRNS, KC_SCLN, KC_QUOT, KC_SLSH, KC_TRNS, KC_HOME,
+		KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS),
+
+    [_FN2] = KEYMAP_625_SPACE(
+		KC_PWR, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, RESET,
+		KC_TRNS, BL_TOGG, BL_STEP, BL_INC, BL_DEC, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+		KC_CAPS, RGB_TOG, RGB_MOD, RGB_VAI, RGB_VAD, RGB_HUI, RGB_HUD, RGB_SAI, RGB_SAD, KC_TRNS, KC_END,
+		KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS),
+
+
+};
+
+const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) {
+
+
+	switch (id) {
+
+	}
+	return MACRO_NONE;
+}
+
+void matrix_init_user(void) {
+}
+
+void matrix_scan_user(void) {
+}
+
+bool process_record_user(uint16_t keycode, keyrecord_t *record) {
+	return true;
+}
+
+void led_set_user(uint8_t usb_led) {
+
+	if (usb_led & (1 << USB_LED_NUM_LOCK)) {
+
+	} else {
+
+	}
+
+	if (usb_led & (1 << USB_LED_CAPS_LOCK)) {
+
+	} else {
+
+	}
+
+	if (usb_led & (1 << USB_LED_SCROLL_LOCK)) {
+
+	} else {
+
+	}
+
+	if (usb_led & (1 << USB_LED_COMPOSE)) {
+
+	} else {
+
+	}
+
+	if (usb_led & (1 << USB_LED_KANA)) {
+
+	} else {
+
+	}
+
+}
+
+enum function_id {
+    SHIFT_ESC,
+};
+
+const uint16_t PROGMEM fn_actions[] = {
+  [0]  = ACTION_FUNCTION(SHIFT_ESC),
+};
+
+void action_function(keyrecord_t *record, uint8_t id, uint8_t opt) {
+  static uint8_t shift_esc_shift_mask;
+  switch (id) {
+    case SHIFT_ESC:
+      shift_esc_shift_mask = get_mods()&MODS_CTRL_MASK;
+      if (record->event.pressed) {
+        if (shift_esc_shift_mask) {
+          add_key(KC_GRV);
+          send_keyboard_report();
+        } else {
+          add_key(KC_ESC);
+          send_keyboard_report();
+        }
+      } else {
+        if (shift_esc_shift_mask) {
+          del_key(KC_GRV);
+          send_keyboard_report();
+        } else {
+          del_key(KC_ESC);
+          send_keyboard_report();
+        }
+      }
+      break;
+  }
+}
--- a/keyboards/mechmini/v2/keymaps/default/keymap.c
+++ b/keyboards/mechmini/v2/keymaps/default/keymap.c
@@ -0,0 +1,115 @@
+#include "mechmini.h"
+
+#define _BL 0
+#define _FN1 1
+#define _FN2 2
+
+#define MODS_CTRL_MASK  (MOD_BIT(KC_LSHIFT)|MOD_BIT(KC_RSHIFT))
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+
+	[_BL] = KEYMAP_SPLIT_SPACE(
+		F(0), KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_BSPC,
+		KC_TAB, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_ENT,
+		KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_RSFT, KC_DOT,
+		KC_LCTL, KC_LALT, KC_LGUI, KC_SPC, KC_SPC, KC_RCTL, MO(1), MO(2)),
+
+	[_FN1] = KEYMAP_SPLIT_SPACE(
+		KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_DEL,
+		KC_TRNS, KC_PGUP, KC_VOLU, KC_TRNS, KC_TRNS, KC_TRNS, KC_LBRC, KC_RBRC, KC_MINS, KC_EQL, KC_TRNS,
+		KC_LSFT, KC_PGDN, KC_VOLD, KC_TRNS, KC_TRNS, KC_SCLN, KC_QUOT, KC_SLSH, KC_COMM, KC_TRNS, KC_HOME,
+		KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS),
+
+	[_FN2] = KEYMAP_SPLIT_SPACE(
+		KC_PWR, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, RESET,
+		KC_TRNS, BL_TOGG, BL_STEP, BL_INC, BL_DEC, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+		KC_CAPS, RGB_TOG, RGB_MOD, RGB_VAI, RGB_VAD, RGB_HUI, RGB_HUD, RGB_SAI, RGB_SAD, KC_TRNS, KC_END,
+		KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS),
+
+};
+
+const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) {
+
+
+	switch (id) {
+
+	}
+	return MACRO_NONE;
+}
+
+void matrix_init_user(void) {
+}
+
+void matrix_scan_user(void) {
+}
+
+bool process_record_user(uint16_t keycode, keyrecord_t *record) {
+	return true;
+}
+
+void led_set_user(uint8_t usb_led) {
+
+	if (usb_led & (1 << USB_LED_NUM_LOCK)) {
+
+	} else {
+
+	}
+
+	if (usb_led & (1 << USB_LED_CAPS_LOCK)) {
+
+	} else {
+
+	}
+
+	if (usb_led & (1 << USB_LED_SCROLL_LOCK)) {
+
+	} else {
+
+	}
+
+	if (usb_led & (1 << USB_LED_COMPOSE)) {
+
+	} else {
+
+	}
+
+	if (usb_led & (1 << USB_LED_KANA)) {
+
+	} else {
+
+	}
+
+}
+
+enum function_id {
+    SHIFT_ESC,
+};
+
+const uint16_t PROGMEM fn_actions[] = {
+  [0]  = ACTION_FUNCTION(SHIFT_ESC),
+};
+
+void action_function(keyrecord_t *record, uint8_t id, uint8_t opt) {
+  static uint8_t shift_esc_shift_mask;
+  switch (id) {
+    case SHIFT_ESC:
+      shift_esc_shift_mask = get_mods()&MODS_CTRL_MASK;
+      if (record->event.pressed) {
+        if (shift_esc_shift_mask) {
+          add_key(KC_GRV);
+          send_keyboard_report();
+        } else {
+          add_key(KC_ESC);
+          send_keyboard_report();
+        }
+      } else {
+        if (shift_esc_shift_mask) {
+          del_key(KC_GRV);
+          send_keyboard_report();
+        } else {
+          del_key(KC_ESC);
+          send_keyboard_report();
+        }
+      }
+      break;
+  }
+}
--- a/keyboards/mechmini/v2/keymaps/default/readme.md
+++ b/keyboards/mechmini/v2/keymaps/default/readme.md
@@ -0,0 +1,2 @@
+# The Default Mechmini 2.0 Layout - the same as split_space keymap
+
--- a/keyboards/mechmini/v2/keymaps/ortho/keymap.c
+++ b/keyboards/mechmini/v2/keymaps/ortho/keymap.c
@@ -0,0 +1,124 @@
+#include "mechmini.h"
+
+#define _BL 0
+#define _FN1 1
+#define _FN2 2
+
+#define MODS_CTRL_MASK  (MOD_BIT(KC_LSHIFT)|MOD_BIT(KC_RSHIFT))
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+
+	[_BL] = KEYMAP_ORTHO(
+		F(0), KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_BSPC,
+		KC_TAB, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT,
+		KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_ENT,
+		KC_CAPS, KC_LCTL, KC_LALT, KC_LGUI, MO(1), KC_SPC, KC_SPC, MO(2), KC_LEFT, KC_DOWN, KC_UP, KC_RGHT),
+
+	[_FN1] = KEYMAP_ORTHO(
+		KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_BSPC,
+		KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_LBRC, KC_RBRC, KC_MINS, KC_EQL, KC_BSLS, KC_DEL,
+		KC_TRNS, KC_TRNS, KC_TRNS, M(1), M(1), KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_HOME, KC_END, KC_TRNS,
+		KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_MNXT, KC_VOLD, KC_VOLU, KC_MPLY),
+
+	[_FN2] = KEYMAP_ORTHO(
+		KC_PWR, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_TRNS,
+		KC_TRNS, BL_TOGG, BL_STEP, BL_INC, BL_DEC, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_DEL,
+		KC_TRNS, RGB_TOG, RGB_MOD, RGB_VAI, RGB_VAD, RGB_HUI, RGB_HUD, RGB_SAI, RGB_SAD, KC_HOME, KC_END, KC_TRNS,
+		RESET, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_MNXT, KC_PGDN, KC_PGUP, KC_MPLY),
+
+};
+
+const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) {
+
+
+	switch (id) {
+		case 1:
+			if (record->event.pressed) {
+				return MACRO( D(LCTL), T(C), U(LCTL), END );
+			}
+			break;
+		case 2:
+			if (record->event.pressed) {
+				return MACRO( D(LCTL), T(V), U(LCTL), END );
+			}
+			break;
+	}
+	return MACRO_NONE;
+}
+
+void matrix_init_user(void) {
+}
+
+void matrix_scan_user(void) {
+}
+
+bool process_record_user(uint16_t keycode, keyrecord_t *record) {
+	return true;
+}
+
+void led_set_user(uint8_t usb_led) {
+
+	if (usb_led & (1 << USB_LED_NUM_LOCK)) {
+
+	} else {
+
+	}
+
+	if (usb_led & (1 << USB_LED_CAPS_LOCK)) {
+
+	} else {
+
+	}
+
+	if (usb_led & (1 << USB_LED_SCROLL_LOCK)) {
+
+	} else {
+
+	}
+
+	if (usb_led & (1 << USB_LED_COMPOSE)) {
+
+	} else {
+
+	}
+
+	if (usb_led & (1 << USB_LED_KANA)) {
+
+	} else {
+
+	}
+
+}
+
+enum function_id {
+    SHIFT_ESC,
+};
+
+const uint16_t PROGMEM fn_actions[] = {
+  [0]  = ACTION_FUNCTION(SHIFT_ESC),
+};
+
+void action_function(keyrecord_t *record, uint8_t id, uint8_t opt) {
+  static uint8_t shift_esc_shift_mask;
+  switch (id) {
+    case SHIFT_ESC:
+      shift_esc_shift_mask = get_mods()&MODS_CTRL_MASK;
+      if (record->event.pressed) {
+        if (shift_esc_shift_mask) {
+          add_key(KC_GRV);
+          send_keyboard_report();
+        } else {
+          add_key(KC_ESC);
+          send_keyboard_report();
+        }
+      } else {
+        if (shift_esc_shift_mask) {
+          del_key(KC_GRV);
+          send_keyboard_report();
+        } else {
+          del_key(KC_ESC);
+          send_keyboard_report();
+        }
+      }
+      break;
+  }
+}
--- a/keyboards/mechmini/v2/keymaps/split_space/keymap.c
+++ b/keyboards/mechmini/v2/keymaps/split_space/keymap.c
@@ -0,0 +1,115 @@
+#include "mechmini.h"
+
+#define _BL 0
+#define _FN1 1
+#define _FN2 2
+
+#define MODS_CTRL_MASK  (MOD_BIT(KC_LSHIFT)|MOD_BIT(KC_RSHIFT))
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+
+	[_BL] = KEYMAP_SPLIT_SPACE(
+		F(0), KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_BSPC,
+		KC_TAB, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_ENT,
+		KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_RSFT, KC_DOT,
+		KC_LCTL, KC_LALT, KC_LGUI, KC_SPC, KC_SPC, KC_RCTL, MO(1), MO(2)),
+
+	[_FN1] = KEYMAP_SPLIT_SPACE(
+		KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_DEL,
+		KC_TRNS, KC_PGUP, KC_VOLU, KC_TRNS, KC_TRNS, KC_TRNS, KC_LBRC, KC_RBRC, KC_MINS, KC_EQL, KC_TRNS,
+		KC_LSFT, KC_PGDN, KC_VOLD, KC_TRNS, KC_TRNS, KC_SCLN, KC_QUOT, KC_SLSH, KC_COMM, KC_TRNS, KC_HOME,
+		KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS),
+
+	[_FN2] = KEYMAP_SPLIT_SPACE(
+		KC_PWR, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, RESET,
+		KC_TRNS, BL_TOGG, BL_STEP, BL_INC, BL_DEC, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+		KC_CAPS, RGB_TOG, RGB_MOD, RGB_VAI, RGB_VAD, RGB_HUI, RGB_HUD, RGB_SAI, RGB_SAD, KC_TRNS, KC_END,
+		KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS),
+
+};
+
+const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) {
+
+
+	switch (id) {
+
+	}
+	return MACRO_NONE;
+}
+
+void matrix_init_user(void) {
+}
+
+void matrix_scan_user(void) {
+}
+
+bool process_record_user(uint16_t keycode, keyrecord_t *record) {
+	return true;
+}
+
+void led_set_user(uint8_t usb_led) {
+
+	if (usb_led & (1 << USB_LED_NUM_LOCK)) {
+
+	} else {
+
+	}
+
+	if (usb_led & (1 << USB_LED_CAPS_LOCK)) {
+
+	} else {
+
+	}
+
+	if (usb_led & (1 << USB_LED_SCROLL_LOCK)) {
+
+	} else {
+
+	}
+
+	if (usb_led & (1 << USB_LED_COMPOSE)) {
+
+	} else {
+
+	}
+
+	if (usb_led & (1 << USB_LED_KANA)) {
+
+	} else {
+
+	}
+
+}
+
+enum function_id {
+    SHIFT_ESC,
+};
+
+const uint16_t PROGMEM fn_actions[] = {
+  [0]  = ACTION_FUNCTION(SHIFT_ESC),
+};
+
+void action_function(keyrecord_t *record, uint8_t id, uint8_t opt) {
+  static uint8_t shift_esc_shift_mask;
+  switch (id) {
+    case SHIFT_ESC:
+      shift_esc_shift_mask = get_mods()&MODS_CTRL_MASK;
+      if (record->event.pressed) {
+        if (shift_esc_shift_mask) {
+          add_key(KC_GRV);
+          send_keyboard_report();
+        } else {
+          add_key(KC_ESC);
+          send_keyboard_report();
+        }
+      } else {
+        if (shift_esc_shift_mask) {
+          del_key(KC_GRV);
+          send_keyboard_report();
+        } else {
+          del_key(KC_ESC);
+          send_keyboard_report();
+        }
+      }
+      break;
+  }
+}
--- a/keyboards/mechmini/v2/keymaps/split_space/readme.md
+++ b/keyboards/mechmini/v2/keymaps/split_space/readme.md
@@ -0,0 +1,2 @@
+# The Default Mechmini 2.0 Layout
+
--- a/keyboards/mechmini/v2/rules.mk
+++ b/keyboards/mechmini/v2/rules.mk
@@ -0,0 +1,63 @@
+# MCU name
+MCU = atmega32u4
+
+# Processor frequency.
+#     This will define a symbol, F_CPU, in all source code files equal to the
+#     processor frequency in Hz. You can then use this symbol in your source code to
+#     calculate timings. Do NOT tack on a 'UL' at the end, this will be done
+#     automatically to create a 32-bit value in your source code.
+#
+#     This will be an integer division of F_USB below, as it is sourced by
+#     F_USB after it has run through any CPU prescalers. Note that this value
+#     does not *change* the processor frequency - it should merely be updated to
+#     reflect the processor speed set externally so that the code can use accurate
+#     software delays.
+F_CPU = 16000000
+
+#
+# LUFA specific
+#
+# Target architecture (see library "Board Types" documentation).
+ARCH = AVR8
+
+# Input clock frequency.
+#     This will define a symbol, F_USB, in all source code files equal to the
+#     input clock frequency (before any prescaling is performed) in Hz. This value may
+#     differ from F_CPU if prescaling is used on the latter, and is required as the
+#     raw input clock is fed directly to the PLL sections of the AVR for high speed
+#     clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
+#     at the end, this will be done automatically to create a 32-bit value in your
+#     source code.
+#
+#     If no clock division is performed on the input clock inside the AVR (via the
+#     CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
+F_USB = $(F_CPU)
+
+# Bootloader
+#     This definition is optional, and if your keyboard supports multiple bootloaders of
+#     different sizes, comment this out, and the correct address will be loaded
+#     automatically (+60). See bootloader.mk for all options.
+BOOTLOADER = atmel-dfu
+
+
+# Interrupt driven control endpoint task(+60)
+OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
+
+
+# Boot Section Size in *bytes*
+OPT_DEFS += -DBOOTLOADER_SIZE=4096
+
+
+# Build Options
+#   comment out to disable the options.
+#
+BOOTMAGIC_ENABLE = yes	# Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE = no	# Mouse keys(+4700)
+EXTRAKEY_ENABLE = yes	# Audio control and System control(+450)
+CONSOLE_ENABLE = no	# Console for debug(+400)
+COMMAND_ENABLE = no    # Commands for debug and configuration
+SLEEP_LED_ENABLE = no  # Breathing sleep LED during USB suspend
+NKRO_ENABLE = yes		# USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+BACKLIGHT_ENABLE = yes  # Enable keyboard backlight functionality
+AUDIO_ENABLE = no
+RGBLIGHT_ENABLE = yes
--- a/keyboards/mechmini/v2/v2.c
+++ b/keyboards/mechmini/v2/v2.c
@@ -0,0 +1 @@
+#include "v2.h"
--- a/keyboards/mechmini/v2/v2.h
+++ b/keyboards/mechmini/v2/v2.h
@@ -0,0 +1,69 @@
+/* Copyright 2018 TurboMech /u/TurboMech <discord> @A9entOran9e#6134
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ *This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#ifndef V2_H
+#define V2_H
+
+#include "../mechmini.h"
+
+#define KEYMAP_ORTHO( \
+	K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, \
+	K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, \
+	K200, K201, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, \
+	K300, K301, K302, K303, K304, K305, K306, K307, K308, K309, K310, K311  \
+) { \
+	{ K000,  K001,  K002,  K003,  K004,  K005,  K006,  K007,  K008,  K009,  K010,  K011 }, \
+	{ K100,  K101,  K102,  K103,  K104,  K105,  K106,  K107,  K108,  K109,  K110,  K111 }, \
+	{ K200,  K201,  K202,  K203,  K204,  K205,  K206,  K207,  K208,  K209,  K210,  K211 }, \
+	{ K300,  K301,  K302,  K303,  K304,  K305,  K305,  K307,  K308,  K309,  K310,  K311 }  \
+}
+
+#define KEYMAP_625_SPACE( \
+    K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, \
+    K100, K101, K102, K103, K104, K105, K106, K107, K108, K109,       K111, \
+    K200,       K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, \
+    K300, K301, K302,                   K306,                   K310, K311  \
+) { \
+    { K000,  K001,  K002,  K003,  K004,  K005,  K006,  K007,  K008,  K009,  K010,  K011 }, \
+    { K100,  K101,  K102,  K103,  K104,  K105,  K106,  K107,  K108,  K109,  KC_NO, K111 }, \
+    { K200,  KC_NO, K202,  K203,  K204,  K205,  K206,  K207,  K208,  K209,  K210,  K211 }, \
+    { K300,  K301,  K302,  KC_NO, KC_NO, KC_NO, K306,  KC_NO, KC_NO, KC_NO, K310,  K311 }  \
+}
+
+#define KEYMAP_SPLIT_SPACE( \
+    K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, \
+    K100, K101, K102, K103, K104, K105, K106, K107, K108, K109,       K111, \
+    K200,       K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, \
+    K300, K301, K302,       K304,             K307,       K309, K310, K311  \
+) { \
+    { K000,  K001,  K002,  K003,  K004,  K005,  K006,  K007,  K008,  K009,  K010,  K011 }, \
+    { K100,  K101,  K102,  K103,  K104,  K105,  K106,  K107,  K108,  K109,  KC_NO, K111 }, \
+    { K200,  KC_NO, K202,  K203,  K204,  K205,  K206,  K207,  K208,  K209,  K210,  K211 }, \
+    { K300,  K301,  K302,  KC_NO, K304,  KC_NO, KC_NO, K307,  KC_NO, K309,  K310,  K311 }  \
+}
+
+#define KEYMAP_2U_SPACE_ORTHO( \
+    K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, \
+    K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, \
+    K200, K201, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, \
+    K300, K301, K302, K303, K304,    K305,    K307, K308, K309, K310, K311  \
+) { \
+    { K000,  K001,  K002,  K003,  K004,  K005,  K006,  K007,  K008,  K009,  K010,  K011 }, \
+    { K100,  K101,  K102,  K103,  K104,  K105,  K106,  K107,  K108,  K109,  K110,  K111 }, \
+    { K200,  K201,  K202,  K203,  K204,  K205,  K206,  K207,  K208,  K209,  K210,  K211 }, \
+    { K300,  K301,  K302,  K303,  K304,  K305,  K305,  K307,  K308,  K309,  K310,  K311 }  \
+}
+
+#endif
--- a/keyboards/octagon/info.json
+++ b/keyboards/octagon/info.json
@@ -0,0 +1,13 @@
+{
+    "keyboard_name": "Octagon", 
+    "manufacturer": "Duck", 
+    "processor": "atmega32u4", 
+    "bootloader": "atmel-dfu", 
+    "width": 16, 
+    "height": 6, 
+    "layouts": {
+        "KEYMAP": {
+            "layout": [{"x":0, "y":0}, {"x":1, "y":0}, {"x":2, "y":0}, {"x":3, "y":0}, {"x":4, "y":0}, {"x":5, "y":0}, {"x":6, "y":0}, {"x":7, "y":0}, {"x":8, "y":0}, {"x":9, "y":0}, {"x":10, "y":0}, {"x":11, "y":0}, {"x":12, "y":0}, {"x":13, "y":0}, {"x":14, "y":0}, {"x":15, "y":0}, {"x":0, "y":1}, {"x":1, "y":1}, {"x":2, "y":1}, {"x":3, "y":1}, {"x":4, "y":1}, {"x":5, "y":1}, {"x":6, "y":1}, {"x":7, "y":1}, {"x":8, "y":1}, {"x":9, "y":1}, {"x":10, "y":1}, {"x":11, "y":1}, {"x":12, "y":1}, {"x":14, "y":1, "w":2}, {"x":15, "y":1}, {"x":0.5, "y":2, "w":1.5}, {"x":1.5, "y":2}, {"x":2.5, "y":2}, {"x":3.5, "y":2}, {"x":4.5, "y":2}, {"x":5.5, "y":2}, {"x":6.5, "y":2}, {"x":7.5, "y":2}, {"x":8.5, "y":2}, {"x":9.5, "y":2}, {"x":10.5, "y":2}, {"x":11.5, "y":2}, {"x":12.5, "y":2}, {"x":14, "y":2, "w":1.5}, {"x":15, "y":2}, {"x":0.75, "y":3, "w":1.75}, {"x":1.75, "y":3}, {"x":2.75, "y":3}, {"x":3.75, "y":3}, {"x":4.75, "y":3}, {"x":5.75, "y":3}, {"x":6.75, "y":3}, {"x":7.75, "y":3}, {"x":8.75, "y":3}, {"x":9.75, "y":3}, {"x":10.75, "y":3}, {"x":11.75, "y":3}, {"x":14, "y":3, "w":2.25}, {"x":15, "y":3}, {"x":1.25, "y":4, "w":2.25}, {"x":2.25, "y":4}, {"x":3.25, "y":4}, {"x":4.25, "y":4}, {"x":5.25, "y":4}, {"x":6.25, "y":4}, {"x":7.25, "y":4}, {"x":8.25, "y":4}, {"x":9.25, "y":4}, {"x":10.25, "y":4}, {"x":11.25, "y":4}, {"x":13, "y":4, "w":1.75}, {"x":14, "y":4}, {"x":15, "y":4}, {"x":0.25, "y":5, "w":1.25}, {"x":1.5, "y":5, "w":1.25}, {"x":2.75, "y":5, "w":1.25}, {"x":9, "y":5, "w":6.25}, {"x":10, "y":5}, {"x":11, "y":5}, {"x":12, "y":5}, {"x":13, "y":5}, {"x":14, "y":5}, {"x":15, "y":5}]
+        }
+    }
+}
--- a/keyboards/planck/keymaps/emilyh/config.h
+++ b/keyboards/planck/keymaps/emilyh/config.h
@@ -0,0 +1,42 @@
+#ifndef CONFIG_USER_H
+#define CONFIG_USER_H
+
+#include "../../config.h"
+
+#ifdef AUDIO_ENABLE
+    #define STARTUP_SONG SONG(PLANCK_SOUND)
+    // #define STARTUP_SONG SONG(NO_SOUND)
+
+    #define DEFAULT_LAYER_SONGS { SONG(QWERTY_SOUND), \
+                                  SONG(COLEMAK_SOUND), \
+                                  SONG(DVORAK_SOUND) \
+                                }
+#endif
+
+#define MUSIC_MASK (keycode != KC_NO)
+
+/*
+ * MIDI options
+ */
+
+/* Prevent use of disabled MIDI features in the keymap */
+//#define MIDI_ENABLE_STRICT 1
+
+/* enable basic MIDI features:
+   - MIDI notes can be sent when in Music mode is on
+*/
+                                
+#define MIDI_BASIC
+
+/* enable advanced MIDI features:
+   - MIDI notes can be added to the keymap
+   - Octave shift and transpose
+   - Virtual sustain, portamento, and modulation wheel
+   - etc.
+*/
+//#define MIDI_ADVANCED
+
+/* override number of MIDI tone keycodes (each octave adds 12 keycodes and allocates 12 bytes) */
+//#define MIDI_TONE_KEYCODE_OCTAVES 2
+
+#endif
--- a/keyboards/planck/keymaps/emilyh/keymap.c
+++ b/keyboards/planck/keymaps/emilyh/keymap.c
@@ -0,0 +1,317 @@
+// This is the canonical layout file for the Quantum project. If you want to add another keyboard,
+// this is the style you want to emulate.
+
+#include "planck.h"
+#include "action_layer.h"
+#ifdef AUDIO_ENABLE
+  #include "audio.h"
+#endif
+#include "eeconfig.h"
+
+extern keymap_config_t keymap_config;
+
+// Each layer gets a name for readability, which is then used in the keymap matrix below.
+// The underscores don't mean anything - you can have a layer called STUFF or any other name.
+// Layer names don't all need to be of the same length, obviously, and you can also skip them
+// entirely and just use numbers.
+
+enum planck_layers {
+  _QWERTY,
+  _COLEMAK,
+  _DVORAK,
+  _LOWER,
+  _RAISE,
+  _PLOVER,
+  _ADJUST
+};
+
+enum planck_keycodes {
+  QWERTY = SAFE_RANGE,
+  COLEMAK,
+  DVORAK,
+  PLOVER,
+  LOWER,
+  RAISE,
+  BACKLIT,
+  EXT_PLV
+};
+
+// Fillers to make layering more clear
+#define _______ KC_TRNS
+#define XXXXXXX KC_NO
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+
+/* Qwerty
+ * ,-----------------------------------------------------------------------------------.
+ * | Esc  |   Q  |   W  |   E  |   R  |   T  |   Y  |   U  |   I  |   O  |   P  | Bksp |
+ * |------+------+------+------+------+-------------+------+------+------+------+------|
+ * | Tab  |   A  |   S  |   D  |   F  |   G  |   H  |   J  |   K  |   L  |   ;  |  "   |
+ * |------+------+------+------+------+------|------+------+------+------+------+------|
+ * | Shift|   Z  |   X  |   C  |   V  |   B  |   N  |   M  |   ,  |   .  |  Up  |Enter |
+ * |------+------+------+------+------+------+------+------+------+------+------+------|
+ * | Ctrl | Brite| GUI  | Alt  |Lower |    Space    |Raise |   /  | Left | Down |Right |
+ * `-----------------------------------------------------------------------------------'
+ */
+[_QWERTY] = {
+  {KC_ESC,  KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,    KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,    KC_BSPC},
+  {KC_TAB,  KC_A,    KC_S,    KC_D,    KC_F,    KC_G,    KC_H,    KC_J,    KC_K,    KC_L,    KC_SCLN, KC_QUOT},
+  {KC_LSFT, KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_N,    KC_M,    KC_COMM, KC_DOT,  KC_UP,   KC_ENT },
+  {KC_LCTL, BACKLIT, KC_LGUI, KC_LALT, LOWER,   KC_SPC,  KC_SPC,  RAISE,   KC_SLSH, KC_LEFT, KC_DOWN, KC_RGHT}
+},
+
+/* Colemak
+ * ,-----------------------------------------------------------------------------------.
+ * | Tab  |   Q  |   W  |   F  |   P  |   G  |   J  |   L  |   U  |   Y  |   ;  | Bksp |
+ * |------+------+------+------+------+-------------+------+------+------+------+------|
+ * | Esc  |   A  |   R  |   S  |   T  |   D  |   H  |   N  |   E  |   I  |   O  |  "   |
+ * |------+------+------+------+------+------|------+------+------+------+------+------|
+ * | Shift|   Z  |   X  |   C  |   V  |   B  |   K  |   M  |   ,  |   .  |   /  |Enter |
+ * |------+------+------+------+------+------+------+------+------+------+------+------|
+ * | Brite| Ctrl | Alt  | GUI  |Lower |    Space    |Raise | Left | Down |  Up  |Right |
+ * `-----------------------------------------------------------------------------------'
+ */
+[_COLEMAK] = {
+  {KC_TAB,  KC_Q,    KC_W,    KC_F,    KC_P,    KC_G,    KC_J,    KC_L,    KC_U,    KC_Y,    KC_SCLN, KC_BSPC},
+  {KC_ESC,  KC_A,    KC_R,    KC_S,    KC_T,    KC_D,    KC_H,    KC_N,    KC_E,    KC_I,    KC_O,    KC_QUOT},
+  {KC_LSFT, KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_K,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH, KC_ENT },
+  {BACKLIT, KC_LCTL, KC_LALT, KC_LGUI, LOWER,   KC_SPC,  KC_SPC,  RAISE,   KC_LEFT, KC_DOWN, KC_UP,   KC_RGHT}
+},
+
+/* Dvorak
+ * ,-----------------------------------------------------------------------------------.
+ * | Tab  |   "  |   ,  |   .  |   P  |   Y  |   F  |   G  |   C  |   R  |   L  | Bksp |
+ * |------+------+------+------+------+-------------+------+------+------+------+------|
+ * | Esc  |   A  |   O  |   E  |   U  |   I  |   D  |   H  |   T  |   N  |   S  |  /   |
+ * |------+------+------+------+------+------|------+------+------+------+------+------|
+ * | Shift|   ;  |   Q  |   J  |   K  |   X  |   B  |   M  |   W  |   V  |   Z  |Enter |
+ * |------+------+------+------+------+------+------+------+------+------+------+------|
+ * | Brite| Ctrl | Alt  | GUI  |Lower |    Space    |Raise | Left | Down |  Up  |Right |
+ * `-----------------------------------------------------------------------------------'
+ */
+[_DVORAK] = {
+  {KC_TAB,  KC_QUOT, KC_COMM, KC_DOT,  KC_P,    KC_Y,    KC_F,    KC_G,    KC_C,    KC_R,    KC_L,    KC_BSPC},
+  {KC_ESC,  KC_A,    KC_O,    KC_E,    KC_U,    KC_I,    KC_D,    KC_H,    KC_T,    KC_N,    KC_S,    KC_SLSH},
+  {KC_LSFT, KC_SCLN, KC_Q,    KC_J,    KC_K,    KC_X,    KC_B,    KC_M,    KC_W,    KC_V,    KC_Z,    KC_ENT },
+  {BACKLIT, KC_LCTL, KC_LALT, KC_LGUI, LOWER,   KC_SPC,  KC_SPC,  RAISE,   KC_LEFT, KC_DOWN, KC_UP,   KC_RGHT}
+},
+
+/* Lower
+ * ,-----------------------------------------------------------------------------------.
+ * |      |   !  |   @  |   #  |   $  |   %  |   ^  |   &  |   *  |   (  |   )  | Del  |
+ * |------+------+------+------+------+-------------+------+------+------+------+------|
+ * |   ~  |  F1  |  F2  |  F3  |  F4  |  F5  |  F6  |   _  |   +  |   {  |   }  |  |   |
+ * |------+------+------+------+------+------|------+------+------+------+------+------|
+ * |      |  F7  |  F8  |  F9  |  F10 |  F11 |  F12 |ISO ~ | Home | Next | Vol+ | Mute |
+ * |------+------+------+------+------+------+------+------+------+------+------+------|
+ * |      |      |      |      |      |             |      |  End | Prev | Vol- | Play |
+ * `-----------------------------------------------------------------------------------'
+ */
+[_LOWER] = {
+  {_______, KC_EXLM, KC_AT,   KC_HASH, KC_DLR,  KC_PERC, KC_CIRC, KC_AMPR,    KC_ASTR,  KC_LPRN, KC_RPRN, KC_DEL},
+  {KC_TILD, KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_UNDS,    KC_PLUS,  KC_LCBR, KC_RCBR, KC_PIPE},
+  {_______, KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,  S(KC_NUHS), KC_HOME,  KC_MNXT, KC_VOLU, KC_MUTE},
+  {_______, _______, _______, _______, _______, _______, _______, _______,    KC_END,   KC_MPRV, KC_VOLD, KC_MPLY}
+},
+
+/* Raise
+ * ,-----------------------------------------------------------------------------------.
+ * |   `  |   1  |   2  |   3  |   4  |   5  |   6  |   7  |   8  |   9  |   0  | Bksp |
+ * |------+------+------+------+------+-------------+------+------+------+------+------|
+ * | Del  |  F1  |  F2  |  F3  |  F4  |  F5  |  F6  |   -  |   =  |   [  |   ]  |  \   |
+ * |------+------+------+------+------+------|------+------+------+------+------+------|
+ * |      |  F7  |  F8  |  F9  |  F10 |  F11 |  F12 |Plover|Pg Up | Next | Vol+ | Mute |
+ * |------+------+------+------+------+------+------+------+------+------+------+------|
+ * |      |      |      |      |      |             |      |Pg Dn | Prev | Vol- | Play |
+ * `-----------------------------------------------------------------------------------'
+ */
+[_RAISE] = {
+  {KC_GRV,  KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,        KC_8,    KC_9,    KC_0,    KC_BSPC},
+  {KC_DEL,  KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_MINS,     KC_EQL,  KC_LBRC, KC_RBRC, KC_BSLS},
+  {_______, KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,  TO(_PLOVER), KC_PGUP, KC_MNXT, KC_VOLU, KC_MUTE},
+  {_______, _______, _______, _______, _______, _______, _______, _______,     KC_PGDN, KC_MPRV, KC_VOLD, KC_MPLY}
+},
+
+/* Numpad Layer 
+ * ,-----------------------------------------------------------------------------------.
+ * | ESC  |      |      |  (   |   )  |      |      |   7  |   8  |   9  |   +  | Bksp |
+ * |------+------+------+------+------+-------------+------+------+------+------+------|
+ * |  Tab |   +  |   -  |   *  |   /  |      |      |   4  |   5  |   6  |   -  |      |
+ * |------+------+------+------+------+------|------+------+------+------+------+------|
+ * |      |      |  Up  |      |      |      |      |   1  |   2  |   3  |  Up  |      |
+ * |------+------+------+------+------+------+------+------+------+------+------+------|
+ * |ToQrty| Left | Down |Right |      |    Space    |   0  |   .  | Left | Down |Right |
+ * `-----------------------------------------------------------------------------------'
+ */
+
+[_PLOVER] = {
+  {KC_ESC , XXXXXXX, XXXXXXX, KC_LPRN, KC_RPRN,XXXXXXX, XXXXXXX,   KC_P7,  KC_P8,    KC_P9,   KC_PPLS, KC_BSPC},
+  {KC_TAB , KC_PPLS, KC_PMNS, KC_PAST, KC_PSLS,XXXXXXX, XXXXXXX,   KC_P4,  KC_P5,    KC_P6,   KC_PMNS, XXXXXXX},
+  {XXXXXXX, XXXXXXX, KC_UP,   XXXXXXX, XXXXXXX,XXXXXXX, XXXXXXX,   KC_P1,  KC_P2,    KC_P3,   KC_UP,   _______},
+  {TO(_QWERTY),KC_LEFT,KC_DOWN,KC_RGHT,XXXXXXX, KC_SPC,  KC_SPC,   KC_P0,  KC_PDOT,  KC_LEFT, KC_DOWN, KC_RGHT}
+},
+
+/* Adjust (Lower + Raise)
+ * ,-----------------------------------------------------------------------------------.
+ * |      | Reset|      |      |      |      |      |      |      |      |      |  Del |
+ * |------+------+------+------+------+-------------+------+------+------+------+------|
+ * |      |      |      |Aud on|Audoff|AGnorm|AGswap|Qwerty|Colemk|Dvorak|Plover|      |
+ * |------+------+------+------+------+------|------+------+------+------+------+------|
+ * |      |Voice-|Voice+|Mus on|Musoff|MIDIon|MIDIof|      |      |      |      |      |
+ * |------+------+------+------+------+------+------+------+------+------+------+------|
+ * |      |      |      |      |      |             |      |      |      |      |      |
+ * `-----------------------------------------------------------------------------------'
+ */
+[_ADJUST] = {
+  {_______, RESET,   _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_DEL },
+  {_______, _______, _______, AU_ON,   AU_OFF,  AG_NORM, AG_SWAP, QWERTY,  COLEMAK, DVORAK,  PLOVER,  _______},
+  {_______, MUV_DE,  MUV_IN,  MU_ON,   MU_OFF,  MI_ON,   MI_OFF,  _______, _______, _______, _______, _______},
+  {_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______}
+}
+
+
+};
+
+#ifdef AUDIO_ENABLE
+
+float tone_startup[][2]    = SONG(STARTUP_SOUND);
+float tone_qwerty[][2]     = SONG(QWERTY_SOUND);
+float tone_dvorak[][2]     = SONG(DVORAK_SOUND);
+float tone_colemak[][2]    = SONG(COLEMAK_SOUND);
+float tone_plover[][2]     = SONG(PLOVER_SOUND);
+float tone_plover_gb[][2]  = SONG(PLOVER_GOODBYE_SOUND);
+float music_scale[][2]     = SONG(MUSIC_SCALE_SOUND);
+
+float tone_goodbye[][2] = SONG(GOODBYE_SOUND);
+#endif
+
+
+void persistant_default_layer_set(uint16_t default_layer) {
+  eeconfig_update_default_layer(default_layer);
+  default_layer_set(default_layer);
+}
+
+bool process_record_user(uint16_t keycode, keyrecord_t *record) {
+  switch (keycode) {
+    case QWERTY:
+      if (record->event.pressed) {
+        #ifdef AUDIO_ENABLE
+          PLAY_NOTE_ARRAY(tone_qwerty, false, 0);
+        #endif
+        persistant_default_layer_set(1UL<<_QWERTY);
+      }
+      return false;
+      break;
+    case COLEMAK:
+      if (record->event.pressed) {
+        #ifdef AUDIO_ENABLE
+          PLAY_NOTE_ARRAY(tone_colemak, false, 0);
+        #endif
+        persistant_default_layer_set(1UL<<_COLEMAK);
+      }
+      return false;
+      break;
+    case DVORAK:
+      if (record->event.pressed) {
+        #ifdef AUDIO_ENABLE
+          PLAY_NOTE_ARRAY(tone_dvorak, false, 0);
+        #endif
+        persistant_default_layer_set(1UL<<_DVORAK);
+      }
+      return false;
+      break;
+    case LOWER:
+      if (record->event.pressed) {
+        layer_on(_LOWER);
+        update_tri_layer(_LOWER, _RAISE, _ADJUST);
+      } else {
+        layer_off(_LOWER);
+        update_tri_layer(_LOWER, _RAISE, _ADJUST);
+      }
+      return false;
+      break;
+    case RAISE:
+      if (record->event.pressed) {
+        layer_on(_RAISE);
+        update_tri_layer(_LOWER, _RAISE, _ADJUST);
+      } else {
+        layer_off(_RAISE);
+        update_tri_layer(_LOWER, _RAISE, _ADJUST);
+      }
+      return false;
+      break;
+    case BACKLIT:
+      if (record->event.pressed) {
+        register_code(KC_RSFT);
+        #ifdef BACKLIGHT_ENABLE
+          backlight_step();
+        #endif
+      } else {
+        unregister_code(KC_RSFT);
+      }
+      return false;
+      break;
+    case PLOVER:
+      if (record->event.pressed) {
+        #ifdef AUDIO_ENABLE
+          stop_all_notes();
+          PLAY_NOTE_ARRAY(tone_plover, false, 0);
+        #endif
+        layer_off(_RAISE);
+        layer_off(_LOWER);
+        layer_off(_ADJUST);
+        layer_on(_PLOVER);
+        if (!eeconfig_is_enabled()) {
+            eeconfig_init();
+        }
+        keymap_config.raw = eeconfig_read_keymap();
+        keymap_config.nkro = 1;
+        eeconfig_update_keymap(keymap_config.raw);
+      }
+      return false;
+      break;
+    case EXT_PLV:
+      if (record->event.pressed) {
+        #ifdef AUDIO_ENABLE
+          PLAY_NOTE_ARRAY(tone_plover_gb, false, 0);
+        #endif
+        layer_off(_PLOVER);
+      }
+      return false;
+      break;
+  }
+  return true;
+}
+
+void matrix_init_user(void) {
+    #ifdef AUDIO_ENABLE
+        startup_user();
+    #endif
+}
+
+#ifdef AUDIO_ENABLE
+
+void startup_user()
+{
+    _delay_ms(20); // gets rid of tick
+    PLAY_NOTE_ARRAY(tone_startup, false, 0);
+}
+
+void shutdown_user()
+{
+    PLAY_NOTE_ARRAY(tone_goodbye, false, 0);
+    _delay_ms(150);
+    stop_all_notes();
+}
+
+void music_on_user(void)
+{
+    music_scale_user();
+}
+
+void music_scale_user(void)
+{
+    PLAY_NOTE_ARRAY(music_scale, false, 0);
+}
+
+#endif
--- a/keyboards/planck/keymaps/emilyh/readme.md
+++ b/keyboards/planck/keymaps/emilyh/readme.md
@@ -0,0 +1,2 @@
+# A modified planck layout with arrow cluster
+
--- a/keyboards/prime_r/config.h
+++ b/keyboards/prime_r/config.h
@@ -0,0 +1,75 @@
+/*
+Copyright 2018 Andrew Heaston
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#ifndef CONFIG_H
+#define CONFIG_H
+
+#include "config_common.h"
+
+/* USB Device descriptor parameter */
+#define VENDOR_ID       0xFEED
+#define PRODUCT_ID      0x6060
+#define DEVICE_VER      0x0001
+#define MANUFACTURER    PrimeKB
+#define PRODUCT         Prime_R
+#define DESCRIPTION     A compact layout with mini-numpad.
+
+/* key matrix size */
+#define MATRIX_ROWS 5
+#define MATRIX_COLS 16
+
+/* key matrix pins */
+#define MATRIX_ROW_PINS { D1, D0, B7, B3, B2 }
+#define MATRIX_COL_PINS { D2, D3, D5, D4, D6, D7, B4, B5, C7, C6, F7, F6, F5, F4, F1, F0 }
+#define UNUSED_PINS
+
+/* COL2ROW or ROW2COL */
+#define DIODE_DIRECTION COL2ROW
+
+/* number of backlight levels */
+#define BACKLIGHT_PIN B6
+#ifdef BACKLIGHT_PIN
+#define BACKLIGHT_LEVELS 5
+#endif
+
+/* Set 0 if debouncing isn't needed */
+#define DEBOUNCING_DELAY 5
+
+/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
+#define LOCKING_SUPPORT_ENABLE
+
+/* Locking resynchronize hack */
+#define LOCKING_RESYNC_ENABLE
+
+/* key combination for command */
+#define IS_COMMAND() ( \
+    keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
+)
+
+/* prevent stuck modifiers */
+#define PREVENT_STUCK_MODIFIERS
+
+
+#ifdef RGB_DI_PIN
+#define RGBLIGHT_ANIMATIONS
+#define RGBLED_NUM 0
+#define RGBLIGHT_HUE_STEP 8
+#define RGBLIGHT_SAT_STEP 8
+#define RGBLIGHT_VAL_STEP 8
+#endif
+
+#endif
--- a/keyboards/prime_r/keymaps/default/config.h
+++ b/keyboards/prime_r/keymaps/default/config.h
@@ -0,0 +1,24 @@
+/* Copyright 2018 Andrew Heaston
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#ifndef CONFIG_USER_H
+#define CONFIG_USER_H
+
+#include "config_common.h"
+
+// place overrides here
+
+#endif
--- a/keyboards/prime_r/keymaps/default/keymap.c
+++ b/keyboards/prime_r/keymaps/default/keymap.c
@@ -0,0 +1,76 @@
+/* Copyright 2018  Andrew Heaston  @rooski15
+ *
+ * Developed by /u/holtenc at www.primekb.com
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+// Prime_R Rev 1.0
+
+#include "prime_r.h"
+#include "action_layer.h"
+#include "backlight.h"
+
+// Fillers to make layering more clear
+#define _______ KC_TRNS
+#define XXXXXXX KC_NO
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+  /* (Base Layer) Default Layer
+   * ,---------------------------------------------------------------.
+   * |Esc|  1|  2|  3|  4|  5|  6|  7|  8|  9|  0|PUP|BSP|PSC|PUP|PDN|
+   * |---------------------------------------------------------------|
+   * |Grv|  Q|  W|  E|  R|  T|  Y|  U|  I|  O|  P|PDN|DEL|  7|  8|  9|
+   * |---------------------------------------------------------------|
+   * |Tab |  A|  S|  D|  F|  G|  H|  J|  K|  L|  '|Return|  4|  5|  6|
+   * |---------------------------------------------------------------|
+   * |Shift|  Z|  X|  C|  V|  B|  N|  M|  ,|  .|  ?|Shift|  1|  2|  3|
+   * |---------------------------------------------------------------|
+   * |Ctrl|Gui |App|Alt| Space| Space  |Alt|App|GUI|Ctrl |  0|  .|Ret|
+   * `---------------------------------------------------------------'
+   */
+  // 0: Base Layer
+	KEYMAP(
+		KC_ESC,  KC_1,    KC_2,    KC_3,    KC_4,    KC_5,   KC_6,    KC_7,   KC_8,    KC_9,    KC_0,    KC_PGUP, KC_BSPC, KC_PSCR, KC_PGUP, KC_PGDN, \
+		KC_GRV,  KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,   KC_Y,    KC_U,   KC_I,    KC_O,    KC_P,    KC_PGDN, KC_DEL,  KC_7,    KC_8,    KC_9,    \
+		KC_TAB,  KC_A,    KC_S,    KC_D,    KC_F,    KC_G,   KC_H,    KC_J,   KC_K,    KC_L,    KC_DQUO,          KC_ENT,  KC_4,    KC_5,    KC_6,    \
+		KC_LSFT,          KC_Z,    KC_X,    KC_C,    KC_V,   KC_B,    KC_N,   KC_M,    KC_LABK, KC_RABK, KC_QUES, KC_LSFT, KC_1,    KC_2,    KC_3,    \
+		KC_LCTL,          KC_LGUI, KC_APP,  KC_LALT, MO(0),           KC_SPC,          KC_RALT, KC_APP,  KC_RGUI, KC_RCTL, KC_0,    KC_DOT,  KC_ENT), \
+
+		// 1: Function Layer
+	KEYMAP(
+		_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, 
+		_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, 
+		_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, 
+		_______,          _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, 
+		_______,          _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______),
+
+};
+
+const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) {
+
+	switch (id) {
+
+	}
+	return MACRO_NONE;
+}
+
+void matrix_init_user(void) {
+}
+
+void matrix_scan_user(void) {
+}
+
+bool process_record_user(uint16_t keycode, keyrecord_t *record) {
+	return true;
+}
--- a/keyboards/prime_r/keymaps/default/readme.md
+++ b/keyboards/prime_r/keymaps/default/readme.md
@@ -0,0 +1,3 @@
+# The default Prime_R layout, with nothing committed to function layer.
+
+# Extracted from json at https://www.primekb.com/pages/programming
--- a/keyboards/prime_r/keymaps/rooski/config.h
+++ b/keyboards/prime_r/keymaps/rooski/config.h
@@ -0,0 +1,27 @@
+/* Copyright 2018 Andrew Heaston
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#ifndef CONFIG_USER_H
+#define CONFIG_USER_H
+
+#include "config_common.h"
+
+// place overrides here
+
+#define DISABLE_SPACE_CADET_ROLLOVER
+
+
+#endif
--- a/keyboards/prime_r/keymaps/rooski/keymap.c
+++ b/keyboards/prime_r/keymaps/rooski/keymap.c
@@ -0,0 +1,199 @@
+/* Copyright 2018  Andrew Heaston  @rooski15
+ *
+ * Developed by /u/holtenc at www.primekb.com
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */// Prime_R Rev 1.0
+
+#include "prime_r.h"
+#include "action_layer.h"
+#include "backlight.h"
+
+// Fillers to make layering more clear
+#define _______ KC_TRNS
+#define XXXXXXX KC_NO
+
+//Arrow Cluster Toggle
+static bool arrow_toggle = false;
+
+//Arrow Keys
+enum custom_keycodes{
+	AR_TOG = SAFE_RANGE, //Toggle Arrow Keys
+	AR_LT,	//Num0 or Left Arrow
+	AR_RT,	//NumEnt or Right Arrow
+	AR_DN,	//NumDot or Down Arrow
+	AR_UP,	//Num2 or Up Arrow
+};
+		
+// Tap/Hold Space Layer
+#define SPC_LT LT(1, KC_SPC)
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+  /* (Base Layer) Default Layer
+   * ,---------------------------------------------------------------.
+   * |Esc|  1|  2|  3|  4|  5|  6|  7|  8|  9|  0|  -|BSP|DEL|HOM|END|
+   * |---------------------------------------------------------------|
+   * |Grv|  Q|  W|  E|  R|  T|  Y|  U|  I|  O|  P|  [|  ]|  7|  8|  9|
+   * |---------------------------------------------------------------|
+   * |Tab |  A|  S|  D|  F|  G|  H|  J|  K|  L|  '|Return|  4|  5|  6|
+   * |---------------------------------------------------------------|
+   * |Shift|  Z|  X|  C|  V|  B|  N|  M|  ,|  .|  ?|Shift|  1|ARU|  3|  AR - U/D/L/R & Toggle
+   * |---------------------------------------------------------------|
+   * |Ctrl|Gui |Alt|TO1| 1/SP |  1/SP  |ART|App|Alt|Ctrl |ARL|ARD|ARR|  Arrow keys operate on AR Toggle to be numpad keys
+   * `---------------------------------------------------------------'
+   */
+  // 0: Base Layer
+	KEYMAP(
+		KC_ESC,  KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_MINS, KC_BSPC, KC_DEL,  KC_HOME, KC_END,   \
+		KC_GRV,  KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,    KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,    KC_LBRC, KC_RBRC, KC_P7,   KC_P8,   KC_P9,    \
+		KC_TAB,  KC_A,    KC_S,    KC_D,    KC_F,    KC_G,    KC_H,    KC_J,    KC_K,    KC_L,    KC_SCLN,          KC_ENT,  KC_P4,   KC_P5,   KC_P6,    \
+		KC_LSPO,          KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_N,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH, KC_RSPC, KC_P1,   AR_UP,   KC_P3,    \
+		KC_LCTL,          KC_LGUI, KC_LALT, TO(1),   SPC_LT,           SPC_LT,           AR_TOG,  KC_APP,  KC_RALT, KC_RCTL, AR_LT,   AR_DN,   AR_RT),   \
+
+  /* (Function Layer)
+   * ,---------------------------------------------------------------.
+   * |Esc| F1| F2| F3| F4| F5| F6| F7| F8| F9| F0|  =|BSP|HOM|END|DEL|
+   * |---------------------------------------------------------------|
+   * |Grv|  Q|  W|  E|  R|  T|  Y|  U|  I|  O|  P|  [|  \|  7|  8|  9|
+   * |---------------------------------------------------------------|
+   * |BL  |  A|  S|  D|  F|  G|  H|  J|  K|  L|  '|Return|  4|  5|  6|
+   * |---------------------------------------------------------------|
+   * |Shift|  Z|  X|  C|  V|  B|  N|  M|  ,|  .|  ?|Shift|  1|VUP|  3|
+   * |---------------------------------------------------------------|
+   * |Ctrl|Gui |Alt|TO0| 1/SP |  1/SP  |ART|TO2|Alt|Ctrl |MUT|VDN|STP|
+   * `---------------------------------------------------------------'
+   */  
+  // 1: Function Layer
+	KEYMAP(
+		_______, KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_EQL,  _______, KC_PSLS, KC_PAST, KC_PPLS, 
+		_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_BSLS, _______, _______, _______, 
+		BL_TOGG, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_QUOT,          _______, _______, _______, _______, 
+		_______,          _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_VOLU, _______, 
+		_______,          _______, _______, TO(0),   _______,          _______,          _______, TO(2),   _______, _______, KC_MUTE, KC_VOLD, KC_MSTP),	
+
+  /* (Numpad Mods)
+   * ,---------------------------------------------------------------.
+   * |Esc|  1|  2|  3|  4|  5|  6|  7|  8|  9|  0|  -|BSP|  /|  *|  +| Mirrors base layer, but with numpad mods
+   * |---------------------------------------------------------------|
+   * |Grv|  Q|  W|  E|  R|  T|  Y|  U|  I|  O|  P|  [|  ]|  7|  8|  9|
+   * |---------------------------------------------------------------|
+   * |Tab |  A|  S|  D|  F|  G|  H|  J|  K|  L|  ;|Return|  4|  5|  6|
+   * |---------------------------------------------------------------|
+   * |Shift|  Z|  X|  C|  V|  B|  N|  M|  ,|  .|  ?|Shift|  1|ARU|  3|
+   * |---------------------------------------------------------------|
+   * |Ctrl|Gui |Alt|TO0| 1/SP |  1/SP  |ART|App|Alt|Ctrl |ARL|ARD|ARR|
+   * `---------------------------------------------------------------'
+   */
+    // 2: Numpad Mods
+	KEYMAP(
+		_______, KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_MINS, _______, KC_PSLS, KC_PAST, KC_PPLS, 
+		_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_RBRC, _______, _______, _______, 
+		_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_SCLN,          _______, _______, _______, _______, 
+		_______,          _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, AR_UP,   _______, 
+		_______,          _______, _______, TO(0),   _______,          _______,          _______, KC_APP,  _______, _______, AR_LT,   AR_DN,   AR_RT ),
+		
+  // 3: Extra
+	KEYMAP(
+		_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, 
+		_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, 
+		_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,          _______, _______, _______, _______, 
+		_______,          _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, 
+		_______,          _______, _______, _______, _______,          _______,          _______, _______, _______, _______, _______, _______, _______),
+
+};
+
+void matrix_init_user(void) {
+	if (get_backlight_level() != 0){
+		backlight_toggle();
+	}
+};
+
+void matrix_scan_user(void) {
+};
+
+bool process_record_user(uint16_t keycode, keyrecord_t *record) {
+	if(record->event.pressed){
+		switch(keycode) {
+			case AR_TOG:
+				arrow_toggle = !arrow_toggle;
+				backlight_toggle();	
+				return false; break;
+			
+			case AR_UP:
+				if(arrow_toggle == 1){
+					SEND_STRING(SS_DOWN(X_UP));
+				} else {
+					SEND_STRING(SS_DOWN(X_KP_2));
+				}
+				return false; break;
+			
+			case AR_DN:
+				if(arrow_toggle == 1){
+					SEND_STRING(SS_DOWN(X_DOWN));
+				} else {
+					SEND_STRING(SS_DOWN(X_KP_DOT));
+				}
+				return false; break;
+			
+			case AR_LT:
+				if(arrow_toggle == 1){
+					SEND_STRING(SS_DOWN(X_LEFT));
+				} else {
+					SEND_STRING(SS_DOWN(X_KP_0));
+				}
+				return false; break;
+			
+			case AR_RT:
+				if(arrow_toggle == 1){
+					SEND_STRING(SS_DOWN(X_RIGHT));
+				} else {
+					SEND_STRING(SS_DOWN(X_KP_ENTER));
+				}
+				return false; break;
+		}
+	}
+	if(!record->event.pressed){
+		switch(keycode) {
+			case AR_UP:
+				if(arrow_toggle == 1){
+					SEND_STRING(SS_UP(X_UP));
+				} else {
+					SEND_STRING(SS_UP(X_KP_2));
+				}
+				return false; break;
+			case AR_DN:
+				if(arrow_toggle == 1){
+					SEND_STRING(SS_UP(X_DOWN));
+				} else {
+					SEND_STRING(SS_UP(X_KP_DOT));
+				}
+				return false; break;
+			case AR_LT:
+				if(arrow_toggle == 1){
+					SEND_STRING(SS_UP(X_LEFT));
+				} else {
+					SEND_STRING(SS_UP(X_KP_0));
+				}
+				return false; break;
+			case AR_RT:
+				if(arrow_toggle == 1){
+					SEND_STRING(SS_UP(X_RIGHT));
+				} else {
+					SEND_STRING(SS_UP(X_KP_ENTER));
+				}
+				return false; break;
+		}
+	}
+	return true;
+};
--- a/keyboards/prime_r/keymaps/rooski/readme.md
+++ b/keyboards/prime_r/keymaps/rooski/readme.md
@@ -0,0 +1,3 @@
+# /u/rooski15 layout
+
+Changes include numpad codes, layer additions, and a toggle-able arrow cluster that is non layer dependant.
--- a/keyboards/prime_r/keymaps/rooski/rules.mk
+++ b/keyboards/prime_r/keymaps/rooski/rules.mk
@@ -0,0 +1,2 @@
+
+COMMAND_ENABLE = no       # Commands for debug and configuration
--- a/keyboards/prime_r/prime_r.c
+++ b/keyboards/prime_r/prime_r.c
@@ -0,0 +1,43 @@
+/* Copyright 2018 Andrew Heaston
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#include "prime_r.h"
+
+void matrix_init_kb(void) {
+	// put your keyboard start-up code here
+	// runs once when the firmware starts up
+
+	matrix_init_user();
+}
+
+void matrix_scan_kb(void) {
+	// put your looping keyboard code here
+	// runs every cycle (a lot)
+
+	matrix_scan_user();
+}
+
+bool process_record_kb(uint16_t keycode, keyrecord_t *record) {
+	// put your per-action keyboard code here
+	// runs for every action, just before processing by the firmware
+
+	return process_record_user(keycode, record);
+}
+
+void led_set_kb(uint8_t usb_led) {
+	// put your keyboard LED indicator (ex: Caps Lock LED) toggling code here
+
+	led_set_user(usb_led);
+}
--- a/keyboards/prime_r/prime_r.h
+++ b/keyboards/prime_r/prime_r.h
@@ -0,0 +1,35 @@
+/* Copyright 2018 Andrew Heaston
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#ifndef PRIMER_H
+#define PRIMER_H
+
+#include "quantum.h"
+
+#define KEYMAP( \
+	K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012, K013, K014, K015, \
+	K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, K113, K114, K115, \
+	K200, K201, K202, K203, K204, K205, K206, K207, K208, K209, K210,       K212, K213, K214, K215, \
+	K300,       K302, K303, K304, K305, K306, K307, K308, K309, K310, K311, K312, K313, K314, K315, \
+	K400,       K402, K403, K404, K405,       K407,       K409, K410, K411, K412, K413, K414, K415  \
+) { \
+	{ K000,  K001,  K002,  K003,  K004,  K005,  K006,  K007,  K008,  K009,  K010,  K011,  K012,  K013,  K014,  K015 }, \
+	{ K100,  K101,  K102,  K103,  K104,  K105,  K106,  K107,  K108,  K109,  K110,  K111,  K112,  K113,  K114,  K115 }, \
+	{ K200,  K201,  K202,  K203,  K204,  K205,  K206,  K207,  K208,  K209,  K210,  KC_NO, K212,  K213,  K214,  K215 }, \
+	{ K300,  KC_NO, K302,  K303,  K304,  K305,  K306,  K307,  K308,  K309,  K310,  K311,  K312,  K313,  K314,  K315 }, \
+	{ K400,  KC_NO, K402,  K403,  K404,  K405,  KC_NO, K407,  KC_NO, K409,  K410,  K411,  K412,  K413,  K414,  K415 }  \
+}
+
+#endif
--- a/keyboards/prime_r/readme.md
+++ b/keyboards/prime_r/readme.md
@@ -0,0 +1,18 @@
+# Prime_R
+
+![Prime_R](https://i.imgur.com/ldOVlLG.jpg)
+
+A compact layout with the footprint of your typical 65% board, featuring a right mini-numpad. Produced by /u/holtenc at www.primekb.com
+
+[Additional resources here](https://www.primekb.com/pages/programming)
+
+Keyboard Maintainer:  [Andrew Heaston](https://github.com/rooski15)  
+Hardware Supported:  prime_r pcb, ATmega32U4  
+Hardware Availability: [Prime_KB](https://www.primekb.com/)
+
+Make example for this keyboard (after setting up your build environment):
+
+    make prime_r:default
+
+See [build environment setup](https://docs.qmk.fm/build_environment_setup.html) then the [make instructions](https://docs.qmk.fm/make_instructions.html) for more information.
+
--- a/keyboards/prime_r/rules.mk
+++ b/keyboards/prime_r/rules.mk
@@ -0,0 +1,56 @@
+# MCU name
+MCU = atmega32u4
+
+# Processor frequency.
+#     This will define a symbol, F_CPU, in all source code files equal to the
+#     processor frequency in Hz. You can then use this symbol in your source code to
+#     calculate timings. Do NOT tack on a 'UL' at the end, this will be done
+#     automatically to create a 32-bit value in your source code.
+#
+#     This will be an integer division of F_USB below, as it is sourced by
+#     F_USB after it has run through any CPU prescalers. Note that this value
+#     does not *change* the processor frequency - it should merely be updated to
+#     reflect the processor speed set externally so that the code can use accurate
+#     software delays.
+F_CPU = 16000000
+
+#
+# LUFA specific
+#
+# Target architecture (see library "Board Types" documentation).
+ARCH = AVR8
+
+# Input clock frequency.
+#     This will define a symbol, F_USB, in all source code files equal to the
+#     input clock frequency (before any prescaling is performed) in Hz. This value may
+#     differ from F_CPU if prescaling is used on the latter, and is required as the
+#     raw input clock is fed directly to the PLL sections of the AVR for high speed
+#     clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
+#     at the end, this will be done automatically to create a 32-bit value in your
+#     source code.
+#
+#     If no clock division is performed on the input clock inside the AVR (via the
+#     CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
+F_USB = $(F_CPU)
+
+# Interrupt driven control endpoint task(+60)
+OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
+
+
+# Boot Section Size in *bytes*
+OPT_DEFS += -DBOOTLOADER_SIZE=4096
+
+
+# Build Options
+#   comment out to disable the options.
+#
+BOOTMAGIC_ENABLE ?= yes	# Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE ?= yes	# Mouse keys(+4700)
+EXTRAKEY_ENABLE ?= yes	# Audio control and System control(+450)
+CONSOLE_ENABLE ?= no	# Console for debug(+400)
+COMMAND_ENABLE ?= no    # Commands for debug and configuration
+SLEEP_LED_ENABLE ?= no  # Breathing sleep LED during USB suspend
+NKRO_ENABLE ?= yes		# USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+BACKLIGHT_ENABLE ?= yes  # Enable keyboard backlight functionality
+AUDIO_ENABLE ?= no
+RGBLIGHT_ENABLE ?= no
--- a/keyboards/s60_x/keymaps/default_rgb/keymap.c
+++ b/keyboards/s60_x/keymaps/default_rgb/keymap.c
@@ -0,0 +1,50 @@
+#include "s60_x.h"
+
+/* 0: Main layer
+┌─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┐
+│ ESC │  1  │  2  │  3  │  4  │  5  │  6  │  7  │  8  │  9  │  0  │  -  │  =  │▒▒▒▒▒│BKSPC│
+├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤
+│ TAB │  Q  │  W  │  E  │  R  │  T  │  Y  │  U  │  I  │  O  │  P  │  [  │  ]  │  \  │█████│
+├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤
+│CAPSL│  A  │  S  │  D  │  F  │  G  │  H  │  J  │  K  │  L  │  ;  │  '  │▒▒▒▒▒│ENTER│█████│
+├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤
+│LSHFT│▒▒▒▒▒│  Z  │  X  │  C  │  V  │  B  │  N  │  M  │  ,  │  .  │  /  │▒▒▒▒▒│RSHFT│▒▒▒▒▒│
+├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤
+│LCTRL│L_GUI│L_ALT│█████│█████│█████│ SPC │█████│█████│█████│R_ALT│ FN0 │ APP │RCTRL│█████│
+└─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┘
+*/
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+    /* 0: ANSI qwerty */
+    KEYMAP(KC_ESC,   KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_MINS,  KC_EQL,  KC_NO,   KC_BSPC, \
+          KC_TAB,    KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,    KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,    KC_LBRC,  KC_RBRC, KC_BSLS,       \
+          KC_CAPS,   KC_A,    KC_S,    KC_D,    KC_F,    KC_G,    KC_H,    KC_J,    KC_K,    KC_L,    KC_SCLN, KC_QUOT,  KC_NO,   KC_ENT ,       \
+          KC_LSFT,   KC_NO,   KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_N,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH,  KC_NO,   KC_RSFT, KC_NO, \
+          KC_LCTL,   KC_LGUI, KC_LALT,                   KC_SPC,                    KC_RALT, KC_FN0,  KC_APP,  KC_RCTL),
+
+/* 1: Fn layer
+UG = Underglow = RGB Backlighting
+BL = Backlighting = In-Switch LED
+┌─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┐
+│GRAVE│ F1  │ F2  │ F3  │ F4  │ F5  │ F6  │ F7  │ F8  │ F9  │ F10 │ F11 │ F12 │▒▒▒▒▒│     │
+├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤
+│     │     │ Up  │     │     │     │     │     │PGUP │PGDWN│PRTSC│SCLCK│PAUSE│     │█████│
+├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤
+│     │Left │Down │Right│     │     │     │     │     │     │     │     │▒▒▒▒▒│     │█████│
+├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤
+│     │     │UGTOG│UGMOD│UGHUI│UGHUD│UGSAI│UGSAD│     │BLDEC│BLTOG│BLINC│▒▒▒▒▒│     │▒▒▒▒▒│
+├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤
+│     │     │     │█████│█████│█████│     │█████│█████│█████│     │     │     │     │█████│
+└─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┘
+*/
+    KEYMAP(
+        KC_GRV,  KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,  KC_TRNS, KC_TRNS, \
+        KC_TRNS, KC_TRNS, KC_UP,   KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_PGUP, KC_PGDN, KC_PSCR, KC_SLCK, KC_PAUS, KC_TRNS,       \
+        KC_TRNS, KC_LEFT, KC_DOWN, KC_RGHT, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,       \
+        KC_TRNS, KC_TRNS, RGB_TOG, RGB_MOD, RGB_HUI, RGB_HUD, RGB_SAI, RGB_SAD, KC_TRNS, BL_DEC,  BL_TOGG, BL_INC,  KC_TRNS, KC_TRNS, KC_TRNS, \
+        KC_TRNS, KC_TRNS, KC_TRNS,                   KC_TRNS,                   KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS),
+};
+
+const uint16_t PROGMEM fn_actions[] = {
+	[0] = ACTION_LAYER_MOMENTARY(1),  // to Fn overlay
+};
--- a/keyboards/s60_x/keymaps/default_rgb/readme.md
+++ b/keyboards/s60_x/keymaps/default_rgb/readme.md
@@ -0,0 +1,27 @@
+### 1  Standard - ANSI
+This is a variation of the default keymap with added RGB underglow and in-switch LED controls.
+
+#### 1.0 Default layer
+    ┌─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┐
+    │ ESC │  1  │  2  │  3  │  4  │  5  │  6  │  7  │  8  │  9  │  0  │  -  │  =  │▒▒▒▒▒│BKSPC│
+    ├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤
+    │ TAB │  Q  │  W  │  E  │  R  │  T  │  Y  │  U  │  I  │  O  │  P  │  [  │  ]  │  \  │█████│
+    ├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤
+    │CAPSL│  A  │  S  │  D  │  F  │  G  │  H  │  J  │  K  │  L  │  ;  │  '  │▒▒▒▒▒│ENTER│█████│
+    ├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤
+    │LSHFT│▒▒▒▒▒│  Z  │  X  │  C  │  V  │  B  │  N  │  M  │  ,  │  .  │  /  │▒▒▒▒▒│RSHFT│▒▒▒▒▒│
+    ├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤
+    │LCTRL│L_GUI│L_ALT│█████│█████│█████│ SPC │█████│█████│█████│R_ALT│ FN0 │ APP │RCTRL│█████│
+    └─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┘
+#### 1.1 Fn layer
+    ┌─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┐
+    │GRAVE│ F1  │ F2  │ F3  │ F4  │ F5  │ F6  │ F7  │ F8  │ F9  │ F10 │ F11 │ F12 │▒▒▒▒▒│     │
+    ├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤
+    │     │     │ Up  │     │     │     │     │     │PGUP │PGDWN│PRTSC│SCLCK│PAUSE│     │█████│
+    ├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤
+    │     │Left │Down │Right│     │     │     │     │     │     │     │     │▒▒▒▒▒│     │█████│
+    ├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤
+    │     │     │UGTOG│UGMOD│UGHUI│UGHUD│UGSAI│UGSAD│     │BLDEC│BLTOG│BLINC│▒▒▒▒▒│     │▒▒▒▒▒│
+    ├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤
+    │     │     │     │█████│█████│█████│     │█████│█████│█████│     │     │     │     │█████│
+    └─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┘
--- a/keyboards/s60_x/keymaps/iso_rgb/keymap.c
+++ b/keyboards/s60_x/keymaps/iso_rgb/keymap.c
@@ -0,0 +1,50 @@
+#include "s60_x.h"
+
+/* 0: Main layer
+┌─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┐
+│ ESC │  1  │  2  │  3  │  4  │  5  │  6  │  7  │  8  │  9  │  0  │  -  │  =  │▒▒▒▒▒│BKSPC│
+├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤
+│ TAB │  Q  │  W  │  E  │  R  │  T  │  Y  │  U  │  I  │  O  │  P  │  [  │  ]  │▒▒▒▒▒│█████│
+├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤
+│CAPSL│  A  │  S  │  D  │  F  │  G  │  H  │  J  │  K  │  L  │  ;  │  '  │NUHS │ENTER│█████│
+├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤
+│LSHFT│  \  │  Z  │  X  │  C  │  V  │  B  │  N  │  M  │  ,  │  .  │  /  │▒▒▒▒▒│RSHFT│▒▒▒▒▒│
+├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤
+│LCTRL│L_GUI│L_ALT│█████│█████│█████│ SPC │█████│█████│█████│R_ALT│ FN0 │ APP │RCTRL│█████│
+└─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┘
+*/
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+    /* 0: ANSI qwerty */
+    KEYMAP(KC_ESC,  KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_MINS, KC_EQL,  KC_NO,   KC_BSPC, \
+           KC_TAB,  KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,    KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,    KC_LBRC, KC_RBRC, KC_NO,       \
+           KC_CAPS, KC_A,    KC_S,    KC_D,    KC_F,    KC_G,    KC_H,    KC_J,    KC_K,    KC_L,    KC_SCLN, KC_QUOT, KC_NUHS, KC_ENT ,       \
+           KC_LSFT, KC_NUBS, KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_N,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH, KC_NO,   KC_RSFT, KC_NO, \
+           KC_LCTL, KC_LGUI, KC_LALT,                   KC_SPC,                    KC_RALT, KC_FN0,  KC_APP,  KC_RCTL),
+	  
+/* 1: Fn layer
+UG = Underglow = RGB Backlighting
+BL = Backlighting = In-Switch LED
+┌─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┐
+│GRAVE│ F1  │ F2  │ F3  │ F4  │ F5  │ F6  │ F7  │ F8  │ F9  │ F10 │ F11 │ F12 │▒▒▒▒▒│     │
+├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤
+│     │     │ Up  │     │     │     │     │     │PGUP │PGDWN│PRTSC│SCLCK│PAUSE│▒▒▒▒▒│█████│
+├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤
+│     │Left │Down │Right│     │     │     │     │     │     │     │     │     │     │█████│
+├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤
+│     │     │UGTOG│UGMOD│UGHUI│UGHUD│UGSAI│UGSAD│     │BLDEC│BLTOG│BLINC│▒▒▒▒▒│     │▒▒▒▒▒│
+├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤
+│     │     │     │█████│█████│█████│     │█████│█████│█████│     │     │     │     │█████│
+└─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┘
+*/
+    KEYMAP(
+        KC_GRV,  KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,  KC_TRNS, KC_TRNS, \
+        KC_TRNS, KC_TRNS, KC_UP,   KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_PGUP, KC_PGDN, KC_PSCR, KC_SLCK, KC_PAUS, KC_TRNS,       \
+        KC_TRNS, KC_LEFT, KC_DOWN, KC_RGHT, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,       \
+        KC_TRNS, KC_TRNS, RGB_TOG, RGB_MOD, RGB_HUI, RGB_HUD, RGB_SAI, RGB_SAD, KC_TRNS, BL_DEC,  BL_TOGG, BL_INC,  KC_TRNS, KC_TRNS, KC_TRNS, \
+        KC_TRNS, KC_TRNS, KC_TRNS,                   KC_TRNS,                   KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS),
+};
+
+const uint16_t PROGMEM fn_actions[] = {
+	[0] = ACTION_LAYER_MOMENTARY(1),  // to Fn overlay
+};
--- a/keyboards/s60_x/keymaps/iso_rgb/readme.md
+++ b/keyboards/s60_x/keymaps/iso_rgb/readme.md
@@ -0,0 +1,27 @@
+### 2  Standard - ISO
+This is a variation of the default ISO keymap with added RGB Underglow and in-switch LED controls.
+
+#### 2.0 Default layer
+    ┌─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┐
+    │ ESC │  1  │  2  │  3  │  4  │  5  │  6  │  7  │  8  │  9  │  0  │  -  │  =  │▒▒▒▒▒│BKSPC│
+    ├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤
+    │ TAB │  Q  │  W  │  E  │  R  │  T  │  Y  │  U  │  I  │  O  │  P  │  [  │  ]  │▒▒▒▒▒│█████│
+    ├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤
+    │CAPSL│  A  │  S  │  D  │  F  │  G  │  H  │  J  │  K  │  L  │  ;  │  '  │NUHS │ENTER│█████│
+    ├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤
+    │LSHFT│  \  │  Z  │  X  │  C  │  V  │  B  │  N  │  M  │  ,  │  .  │  /  │▒▒▒▒▒│RSHFT│▒▒▒▒▒│
+    ├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤
+    │LCTRL│L_GUI│L_ALT│█████│█████│█████│ SPC │█████│█████│█████│R_ALT│ FN0 │ APP │RCTRL│█████│
+    └─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┘
+#### 2.1 Fn layer
+    ┌─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┐
+    │GRAVE│ F1  │ F2  │ F3  │ F4  │ F5  │ F6  │ F7  │ F8  │ F9  │ F10 │ F11 │ F12 │▒▒▒▒▒│     │
+    ├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤
+    │     │     │ Up  │     │     │     │     │     │PGUP │PGDWN│PRTSC│SCLCK│PAUSE│▒▒▒▒▒│█████│
+    ├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤
+    │     │Left │Down │Right│     │     │     │     │     │     │     │     │     │     │█████│
+    ├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤
+    │     │     │UGTOG│UGMOD│UGHUI│UGHUD│UGSAI│UGSAD│     │BLDEC│BLTOG│BLINC│▒▒▒▒▒│     │▒▒▒▒▒│
+    ├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤
+    │     │     │     │█████│█████│█████│     │█████│█████│█████│     │     │     │     │█████│
+    └─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┘
--- a/keyboards/v60_type_r/info.json
+++ b/keyboards/v60_type_r/info.json
@@ -0,0 +1,13 @@
+{
+    "keyboard_name": "V60 Type R", 
+    "manufacturer": "KBParadise", 
+    "processor": "atmega32u4", 
+    "bootloader": "atmel-dfu", 
+    "width": 15, 
+    "height": 5, 
+    "layouts": {
+        "KEYMAP": {
+            "layout": [{"x":0, "y":0}, {"x":1, "y":0}, {"x":2, "y":0}, {"x":3, "y":0}, {"x":4, "y":0}, {"x":5, "y":0}, {"x":6, "y":0}, {"x":7, "y":0}, {"x":8, "y":0}, {"x":9, "y":0}, {"x":10, "y":0}, {"x":11, "y":0}, {"x":12, "y":0}, {"x":14, "y":0, "w":2}, {"x":0.5, "y":1, "w":1.5}, {"x":1.5, "y":1}, {"x":2.5, "y":1}, {"x":3.5, "y":1}, {"x":4.5, "y":1}, {"x":5.5, "y":1}, {"x":6.5, "y":1}, {"x":7.5, "y":1}, {"x":8.5, "y":1}, {"x":9.5, "y":1}, {"x":10.5, "y":1}, {"x":11.5, "y":1}, {"x":12.5, "y":1}, {"x":14, "y":1, "w":1.5}, {"x":0.75, "y":2, "w":1.75}, {"x":1.75, "y":2}, {"x":2.75, "y":2}, {"x":3.75, "y":2}, {"x":4.75, "y":2}, {"x":5.75, "y":2}, {"x":6.75, "y":2}, {"x":7.75, "y":2}, {"x":8.75, "y":2}, {"x":9.75, "y":2}, {"x":10.75, "y":2}, {"x":11.75, "y":2}, {"x":14, "y":2, "w":2.25}, {"x":1.25, "y":3, "w":2.25}, {"x":2.25, "y":3}, {"x":3.25, "y":3}, {"x":4.25, "y":3}, {"x":5.25, "y":3}, {"x":6.25, "y":3}, {"x":7.25, "y":3}, {"x":8.25, "y":3}, {"x":9.25, "y":3}, {"x":10.25, "y":3}, {"x":11.25, "y":3}, {"x":14, "y":3, "w":2.75}, {"x":0.25, "y":4, "w":1.25}, {"x":1.5, "y":4, "w":1.25}, {"x":2.75, "y":4, "w":1.25}, {"x":9, "y":4, "w":6.25}, {"x":10.25, "y":4, "w":1.25}, {"x":11.5, "y":4, "w":1.25}, {"x":12.75, "y":4, "w":1.25}, {"x":14, "y":4, "w":1.25}]
+        }
+    }
+}
--- a/keyboards/xd60/keymaps/rooski/instructions.txt
+++ b/keyboards/xd60/keymaps/rooski/instructions.txt
@@ -0,0 +1,2 @@
+cd c:/QMK
+make xd60        / /                 / / / / / / 
--- a/keyboards/xd60/keymaps/rooski/keymap.c
+++ b/keyboards/xd60/keymaps/rooski/keymap.c
@@ -0,0 +1,82 @@
+// XD60 Rev 2.0
+
+#include "xd60.h"
+#include "action_layer.h"
+//#include "action_tapping.h"
+#include "backlight.h"
+
+// Define tapping term
+#define TAPPING_TERM    150
+
+// Fillers to make layering more clear
+#define _______ KC_TRNS
+#define XXXXXXX KC_NO
+// Layer definitions~
+#define _BL 0
+#define _FL 1
+#define _LK 2
+
+// RShift TapHold
+#define RSTT MT(MOD_RSFT, KC_SLSH)
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+  /* (Base Layer) Default Layer
+   * ,-----------------------------------------------------------.
+   * |Esc~| 1|  2|  3|  4|  5|  6|  7|  8|  9|  0|  -|  =|Backsp |
+   * |-----------------------------------------------------------|
+   * |Tab  |  Q|  W|  E|  R|  T|  Y|  U|  I|  O|  P|  [|  ]|  \  |
+   * |-----------------------------------------------------------|
+   * | Caps |  A|  S|  D|  F|  G|  H|  J|  K|  L|  ;|  '| Return |
+   * |-----------------------------------------------------------|
+   * |Shift  |  Z|  X|  C|  V|  B|  N|  M|  ,|  .|Shift| Up |Del |
+   * |-----------------------------------------------------------|
+   * |Ctrl|Gui |Alt |      Space           |Ctrl|Fn| LT| DN | RT |
+   * `-----------------------------------------------------------'
+   */
+  // 0: Base Layer
+  [_BL] = KEYMAP(
+      KC_GESC, KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_MINS, KC_EQL,  KC_BSPC, KC_BSPC,  \
+      KC_TAB,  KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,    KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,    KC_LBRC, KC_RBRC, KC_BSLS,            \
+      KC_CAPS, KC_A,    KC_S,    KC_D,    KC_F,    KC_G,    KC_H,    KC_J,    KC_K,    KC_L,    KC_SCLN, KC_QUOT, XXXXXXX, KC_ENT,             \
+      KC_LSFT, KC_LSFT, KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_N,    KC_M,    KC_COMM, KC_DOT,  XXXXXXX, RSTT,    KC_UP,   KC_DEL,    \
+      KC_LCTL, KC_LGUI, KC_LALT,                            KC_SPC,                             KC_RCTL, MO(_FL), KC_LEFT, KC_DOWN, KC_RIGHT),
+
+  // 1: Function Layer
+  [_FL] = KEYMAP(
+      KC_GRV,  KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,  KC_DEL,  KC_DEL,   \
+      XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, KC_PSCR, XXXXXXX, XXXXXXX, XXXXXXX,           \
+      XXXXXXX, KC_MPRV, KC_MPLY, KC_MNXT, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX,           \
+      XXXXXXX, XXXXXXX, KC_VOLD, KC_VOLU, KC_MUTE, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, _______, _______,  \
+      XXXXXXX, XXXXXXX, XXXXXXX,                            XXXXXXX,                            TG(_LK), _______, KC_HOME, _______, KC_END),
+
+ // 2: Lighting Keys
+  [_LK] = KEYMAP(
+      TO(_BL), KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   RESET,   KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,  KC_DEL,  KC_DEL,   \
+      XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, KC_PSCR, XXXXXXX, XXXXXXX, XXXXXXX,           \
+      RESET  , KC_MPRV, KC_MPLY, KC_MNXT, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX,           \
+      XXXXXXX, XXXXXXX, KC_VOLD, KC_VOLU, KC_MUTE, XXXXXXX, XXXXXXX, RGB_SAD, RGB_SAI, RGB_HUD, RGB_HUI, XXXXXXX, XXXXXXX, RGB_VAI, BL_STEP,  \
+      XXXXXXX, XXXXXXX, XXXXXXX,                            XXXXXXX,                            TO(_BL), XXXXXXX, RGB_TOG, RGB_VAD, RGB_MOD),
+
+};
+
+// Macros
+const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) {
+
+  // MACRODOWN only works in this function
+  switch(id) {
+    case 0:
+      if (record->event.pressed) {
+        register_code(KC_RSFT);
+        backlight_step();
+      }
+      else { unregister_code(KC_RSFT); }
+      break;
+  }
+
+  return MACRO_NONE;
+};
+
+// Loop
+void matrix_scan_user(void) {
+  // Empty
+};
--- a/keyboards/xd75/keymaps/emilyh/config.h
+++ b/keyboards/xd75/keymaps/emilyh/config.h
@@ -0,0 +1,24 @@
+/* Copyright 2017 REPLACE_WITH_YOUR_NAME
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#ifndef CONFIG_USER_H
+#define CONFIG_USER_H
+
+#include "../../config.h"
+
+// place overrides here
+
+#endif
--- a/keyboards/xd75/keymaps/emilyh/keymap.c
+++ b/keyboards/xd75/keymaps/emilyh/keymap.c
@@ -0,0 +1,187 @@
+/* Copyright 2017 REPLACE_WITH_YOUR_NAME
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#include "xd75.h"
+#include "backlight.h"
+
+// Fillers to make layering more clear
+#define _______ KC_TRNS
+#define ___T___ KC_TRNS
+#define XXXXXXX KC_NO
+
+// Layer shorthand
+#define _QW 0
+#define _CM 1
+#define _DV 2
+#define _LW 3
+#define _RS 4
+#define _FN 5
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+
+/* QWERTY - MIT ENHANCED / GRID COMPATIBLE
+ * .---------------------------------------------------------------------------------------------------------------------- 2u ------------.
+ * | `      | 1      | 2      | 3      | 4      | 5      | 6      | 7      | 8      | 9      | 0      | -      | =      | XXXXXX . BACKSP |
+ * |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+-----------------|
+ * | TAB    | Q      | W      | E      | R      | T      | Y      | U      | I      | O      | P      | [      | ]      | \      | DEL    |
+ * |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+- 2u ------------+--------|
+ * | ESC    | A      | S      | D      | F      | G      | H      | J      | K      | L      | ;      | '      | XXXXXX . ENTER  | PG UP  |
+ * |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+- 2u ---------------------+--------|
+ * | LSHIFT | Z      | X      | C      | V      | B      | N      | M      | ,      | .      | /      | XXXXXX . RSHIFT | UP     | PG DN  |
+ * |--------+--------+--------+--------+--------+- 2u ------------+--------+--------+--------+--------+-----------------+--------+--------|
+ * | BRITE  | LCTRL  | LALT   | LGUI   | RAISE  | XXXXXX . SPACE  | LOWER  | RGUI   | RALT   | RCTRL  | FN     | LEFT   | DOWN   | RIGHT  |
+ * '--------------------------------------------------------------------------------------------------------------------------------------'
+ */
+	
+ [_QW] = { /* QWERTY */
+  { KC_ESC,  KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_EQL,  KC_PSLS, KC_PAST, KC_PPLS  },
+  { KC_TAB,  KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,    KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,    KC_BSPC, KC_P7,   KC_P8,   KC_P9   },
+  { KC_CAPS, KC_A,    KC_S,    KC_D,    KC_F,    KC_G,    KC_H,    KC_J,    KC_K,    KC_L,    KC_SCLN, KC_QUOT, KC_P4,   KC_P5,   KC_P6  },
+  { KC_LSFT, KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_N,    KC_M,    KC_COMM, KC_DOT,  KC_UP,   KC_ENT,  KC_P1,   KC_P2,   KC_P3  },
+  { KC_LCTL, M(0),    KC_LGUI, KC_LALT, MO(_LW), KC_SPC,  KC_SPC,  MO(_RS), KC_SLSH, KC_LEFT, KC_DOWN, KC_RIGHT,KC_P0,   KC_PDOT, KC_PENT  },
+ },
+
+/* COLEMAK - MIT ENHANCED / GRID COMPATIBLE
+ * .---------------------------------------------------------------------------------------------------------------------- 2u ------------.
+ * | `      | 1      | 2      | 3      | 4      | 5      | 6      | 7      | 8      | 9      | 0      | -      | =      | XXXXXX . BACKSP |
+ * |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+-----------------|
+ * | TAB    | Q      | W      | F      | P      | G      | J      | L      | U      | Y      | ;      | [      | ]      | \      | DEL    |
+ * |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+- 2u ------------+--------|
+ * | ESC    | A      | R      | S      | T      | D      | H      | N      | E      | I      | O      | '      | XXXXXX . ENTER  | PG UP  |
+ * |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+- 2u ---------------------+--------|
+ * | LSHIFT | Z      | X      | C      | V      | B      | K      | M      | ,      | .      | /      | XXXXXX . RSHIFT | UP     | PG DN  |
+ * |--------+--------+--------+--------+--------+- 2u ------------+--------+--------+--------+--------+-----------------+--------+--------|
+ * | BRITE  | LCTRL  | LALT   | LGUI   | RAISE  | XXXXXX . SPACE  | LOWER  | RGUI   | RALT   | RCTRL  | FN     | LEFT   | DOWN   | RIGHT  |
+ * '--------------------------------------------------------------------------------------------------------------------------------------'
+ */
+	
+ [_CM] = { /* COLEMAK */
+  { KC_GRV,  KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_MINS, KC_EQL,  KC_BSPC, KC_BSPC  },
+  { KC_TAB,  KC_Q,    KC_W,    KC_F,    KC_P,    KC_G,    KC_J,    KC_L,    KC_U,    KC_Y,    KC_SCLN, KC_LBRC, KC_RBRC, KC_BSLS, KC_DEL   },
+  { KC_ESC,  KC_A,    KC_R,    KC_S,    KC_T,    KC_D,    KC_H,    KC_N,    KC_E,    KC_I,    KC_O,    KC_QUOT, KC_ENT,  KC_ENT,  KC_PGUP  },
+  { KC_LSFT, KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_K,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH, KC_RSFT, KC_RSFT, KC_UP,   KC_PGDN  },
+  { M(0),    KC_LCTL, KC_LALT, KC_LGUI, MO(_RS), KC_SPC,  KC_SPC,  MO(_LW), KC_RGUI, KC_RALT, KC_RCTL, MO(_FN), KC_LEFT, KC_DOWN, KC_RGHT  },
+ },
+	
+/* DVORAK - MIT ENHANCED / GRID COMPATIBLE
+ * .---------------------------------------------------------------------------------------------------------------------- 2u ------------.
+ * | `      | 1      | 2      | 3      | 4      | 5      | 6      | 7      | 8      | 9      | 0      | -      | =      | XXXXXX . BACKSP |
+ * |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+-----------------|
+ * | TAB    | '      | ,      | .      | P      | Y      | F      | G      | C      | R      | L      | [      | ]      | \      | DEL    |
+ * |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+- 2u ------------+--------|
+ * | ESC    | A      | O      | E      | U      | I      | D      | H      | T      | N      | S      | /      | XXXXXX . ENTER  | PG UP  |
+ * |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+- 2u ---------------------+--------|
+ * | LSHIFT | ;      | Q      | J      | K      | X      | B      | M      | W      | V      | Z      | XXXXXX . RSHIFT | UP     | PG DN  |
+ * |--------+--------+--------+--------+--------+- 2u ------------+--------+--------+--------+--------+-----------------+--------+--------|
+ * | BRITE  | LCTRL  | LALT   | LGUI   | RAISE  | XXXXXX . SPACE  | LOWER  | RGUI   | RALT   | RCTRL  | FN     | LEFT   | DOWN   | RIGHT  |
+ * '--------------------------------------------------------------------------------------------------------------------------------------'
+ */
+
+ [_DV] = { /* DVORAK */
+  { KC_GRV,  KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_MINS, KC_EQL,  KC_BSPC, KC_BSPC  },
+  { KC_TAB,  KC_QUOT, KC_COMM, KC_DOT,  KC_P,    KC_Y,    KC_F,    KC_G,    KC_C,    KC_R,    KC_L,    KC_LBRC, KC_RBRC, KC_BSLS, KC_DEL   },
+  { KC_ESC,  KC_A,    KC_O,    KC_E,    KC_U,    KC_I,    KC_D,    KC_H,    KC_T,    KC_N,    KC_S,    KC_SLSH, KC_ENT,  KC_ENT,  KC_PGUP  },
+  { KC_LSFT, KC_SCLN, KC_Q,    KC_J,    KC_K,    KC_X,    KC_B,    KC_M,    KC_W,    KC_V,    KC_Z,    KC_RSFT, KC_RSFT, KC_UP,   KC_PGDN  },
+  { M(0),    KC_LCTL, KC_LALT, KC_LGUI, MO(_RS), KC_SPC,  KC_SPC,  MO(_LW), KC_RGUI, KC_RALT, KC_RCTL, MO(_FN), KC_LEFT, KC_DOWN, KC_RGHT  },
+ },
+
+/* LOWERED
+ * .---------------------------------------------------------------------------------------------------------------------- 2u ------------.
+ * |        | F1     | F2     | F3     | F4     | F5     | F6     | F7     | F8     | F9     | F10    | F11    | F12    | XXXXXX .        |
+ * |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+-----------------|
+ * |        | !      | @      | #      | $      | %      | ^      | &      | *      | (      | )      |        |        |        | INS    |
+ * |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+- 2u ------------+--------|
+ * |        | F1     | F2     | F3     | F4     | F5     | F6     | _      | +      | {      | }      | |      | XXXXXX .        |        |
+ * |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+- 2u ---------------------+--------|
+ * |        | F7     | F8     | F9     | F10    | F11    | F12    |        |        |        |        | XXXXXX .        |        |        |
+ * |--------+--------+--------+--------+--------+- 2u ------------+--------+--------+--------+--------+-----------------+--------+--------|
+ * |        |        |        |        |        | XXXXXX .        |        |        |        |        |        |        |        |        |
+ * '--------------------------------------------------------------------------------------------------------------------------------------'
+ */
+ 
+ [_LW] = { /* LOWERED */
+  { _______, KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,  ___T___, ___T___  },
+  { _______, KC_EXLM, KC_AT,   KC_HASH, KC_DLR,  KC_PERC, KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN, _______, _______, _______, KC_INS   },
+  { RESET,   KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_UNDS, KC_PLUS, KC_LCBR, KC_RCBR, KC_PIPE, ___T___, ___T___, _______  },
+  { _______, KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,  _______, _______, _______, _______, ___T___, ___T___, _______, _______  },
+  { _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______  },
+ },
+
+/* RAISED
+ * .---------------------------------------------------------------------------------------------------------------------- 2u ------------.
+ * |        | F1     | F2     | F3     | F4     | F5     | F6     | F7     | F8     | F9     | F10    | F11    | F12    | XXXXXX .        |
+ * |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+-----------------|
+ * |        | 1      | 2      | 3      | 4      | 5      | 6      | 7      | 8      | 9      | 0      |        |        |        | INS    |
+ * |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+- 2u ------------+--------|
+ * |        | F1     | F2     | F3     | F4     | F5     | F6     | -      | =      | [      | ]      | \      | XXXXXX .        |        |
+ * |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+- 2u ---------------------+--------|
+ * |        | F7     | F8     | F9     | F10    | F11    | F12    |        |        |        |        | XXXXXX .        |        |        |
+ * |--------+--------+--------+--------+--------+- 2u ------------+--------+--------+--------+--------+-----------------+--------+--------|
+ * |        |        |        |        |        | XXXXXX .        |        |        |        |        |        |        |        |        |
+ * '--------------------------------------------------------------------------------------------------------------------------------------'
+ */
+ 
+ [_RS] = { /* RAISED */
+  { _______, KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,  ___T___, ___T___  },
+  { _______, KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    _______, _______, _______, KC_INS   },
+  { _______, KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_MINS, KC_EQL,  KC_LBRC, KC_RBRC, KC_BSLS, ___T___, ___T___, _______  },
+  { _______, KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,  _______, _______, _______, _______, ___T___, ___T___, _______, _______  },
+  { _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______  },
+ },
+ 
+/* FUNCTION
+ * .---------------------------------------------------------------------------------------------------------------------- 2u ------------.
+ * | NUM LK | F1     | F2     | F3     | F4     | F5     | F6     | F7     | F8     | F9     | F10    | F11    | F12    | XXXXXX .        |
+ * |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+-----------------|
+ * | SCR LK | F13    | F14    | F15    | F16    | F17    | F18    | F19    | F20    | F21    | F22    | F23    | F24    | PAUSE  | PR SCR |
+ * |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+- 2u ------------+--------|
+ * | CAP LK | MS BT5 | MS BT4 | MS BT3 | MS BT2 | SLOW M | FAST M | NEXT   | VOL+   | VOL-   | PLAY   |        | XXXXXX .        | WHEEL+ |
+ * |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+- 2u ---------------------+--------|
+ * | RGB TG | RGB MD | RGB HI | RGB HD | RGB SI | RGB SD | RGB VI | RGB VD | BL TOG | BL INC | BL DEC | XXXXXX .        | MOUS U | WHEEL- |
+ * |--------+--------+--------+--------+--------+-- 2u -----------+--------+--------+--------+--------+-----------------+--------+--------|
+ * | RESET  |        | QWERTY | COLEMK | DVORAK | XXXXXX . MS BT1 |        |        |        |        |        | MOUS L | MOUS D | MOUS R |
+ * '--------------------------------------------------------------------------------------------------------------------------------------'
+ */
+ 
+ [_FN] = { /* FUNCTION */
+  { KC_NLCK, KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,  ___T___, ___T___  },
+  { KC_SLCK, KC_F13,  KC_F14,  KC_F15,  KC_F16,  KC_F17,  KC_F18,  KC_F19,  KC_F20,  KC_F21,  KC_F22,  KC_F23,  KC_F24,  KC_PAUS, KC_PSCR  },
+  { KC_CAPS, KC_BTN5, KC_BTN4, KC_BTN3, KC_BTN2, KC_ACL0, KC_ACL2, KC_MNXT, KC_VOLD, KC_VOLU, KC_MPLY, _______, ___T___, ___T___, KC_WH_U  },
+  { RGB_TOG, RGB_MOD, RGB_HUI, RGB_HUD, RGB_SAI, RGB_SAD, RGB_VAI, RGB_VAD, BL_TOGG, BL_INC,  BL_DEC,   ___T___, ___T___, KC_MS_U, KC_WH_D  },
+  { RESET  , _______, DF(_QW), DF(_CM), DF(_DV), KC_BTN1, KC_BTN1, _______, _______, _______, _______, _______, KC_MS_L, KC_MS_D, KC_MS_R  },
+ },
+};
+
+const uint16_t PROGMEM fn_actions[] = {
+
+};
+
+const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt)
+{
+  // MACRODOWN only works in this function
+      switch(id) {
+        case 0:
+          if (record->event.pressed) {
+            register_code(KC_RSFT);
+            #ifdef BACKLIGHT_ENABLE
+              backlight_step();
+            #endif
+          } else {
+            unregister_code(KC_RSFT);
+          }
+        break;
+      }
+    return MACRO_NONE;
+};
--- a/keyboards/xd75/keymaps/emilyh/readme.md
+++ b/keyboards/xd75/keymaps/emilyh/readme.md
@@ -0,0 +1 @@
+# Modified keymap for xd75 with numpad on right
--- a/keyboards/xd75/keymaps/emilyh/rules.mk
+++ b/keyboards/xd75/keymaps/emilyh/rules.mk
@@ -0,0 +1,18 @@
+# Copyright 2013 Jun Wako <wakojun@gmail.com>
+#
+# This program is free software: you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation, either version 2 of the License, or
+# (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program.  If not, see <http://www.gnu.org/licenses/>.
+
+ifndef QUANTUM_DIR
+	include ../../../../Makefile
+endif
--- a/util/msys2_install.sh
+++ b/util/msys2_install.sh
@@ -13,7 +13,7 @@ source "$dir/win_shared_install.sh"

 function install_avr {
    rm -f -r "$avrtools"
-    wget "http://www.atmel.com/images/avr8-gnu-toolchain-installer-3.5.4.91-win32.any.x86.exe"
+    wget "http://ww1.microchip.com/downloads/en/DeviceDoc/avr8-gnu-toolchain-installer-3.5.4.91-win32.any.x86.exe"
    7z x avr8-gnu-toolchain-installer-3.5.4.91-win32.any.x86.exe
    rm avr8-gnu-toolchain-installer-3.5.4.91-win32.any.x86.exe
 }
@@ -114,4 +114,4 @@ echo
 echo "******************************************************************************"
 echo "Installation completed!"
 echo "Please close this Window and restart MSYS2 MinGW"
-echo "******************************************************************************"
+echo "******************************************************************************"
--- a/util/win_shared_install.sh
+++ b/util/win_shared_install.sh
@@ -18,9 +18,10 @@ function install_utils {
    wget 'https://www.pjrc.com/teensy/teensy_loader_cli_windows.zip'
    unzip teensy_loader_cli_windows.zip

-    echo "Installing Atmel Flip"
-    wget 'http://www.atmel.com/images/Flip%20Installer%20-%203.4.7.112.exe'
-    mv Flip\ Installer\ \-\ 3.4.7.112.exe FlipInstaller.exe
+    # This URL has changed and I can't find the new location. Commenting out until we figure out the new URL or determine this isn't needed. -skullY
+    #echo "Installing Atmel Flip"
+    #wget 'http://www.atmel.com/images/Flip%20Installer%20-%203.4.7.112.exe'
+    #mv Flip\ Installer\ \-\ 3.4.7.112.exe FlipInstaller.exe

    echo "Downloading the QMK driver installer"
    wget -qO- https://api.github.com/repos/qmk/qmk_driver_installer/releases | grep browser_download_url | head -n 1 | cut -d '"' -f 4 | wget -i -
Author	SHA1	Message	Date
Jack Humbert	7c3af55912	Create info.json	2018-01-06 01:27:49 -05:00
Jack Humbert	81ae0fb10e	Update info.json	2018-01-05 16:28:46 -05:00
Jack Humbert	e659bc4467	Info json fixes (#2232 ) * Update info.json * Update info.json * Update info.json * Update info.json	2018-01-05 15:44:59 -05:00
Jack Humbert	e3541853a9	Update info.json	2018-01-05 15:33:15 -05:00
Jack Humbert	0ea6cf719e	Update info.json	2018-01-05 15:32:52 -05:00
Hannes Egler	c9d23f50f6	Added RGB and in-switch LED controls (#2227 ) * Default layout with RGB and in-switch LED controls This is a variation of the default keymap with added RGB underglow and in-switch LED controls. * Readme for default_rgb keymap * ISO keymap with RGB and in-switch LED controls This is a variation of the default ISO keymap with added RGB Underglow and in-switch LED controls. * readme for iso_rgb keymap	2018-01-05 11:50:28 -05:00
rooski15	c5c35f5f4b	Rooski15: Update Prime_R ReadMe & Keymap (#2228 ) * Rooski15: Updated prime_r Keymaps * Rooski15: Updated Prime_R:Rooski * Rooski15: Updated Prime_R readme * Rooski15: Updated Prime_R readme * Rooski15: Updated Prime_R readme	2018-01-05 11:37:53 -05:00
TurboMech	6b584a23c0	Updated ACR60, Mechmini, ALU84 readme information and config.h descripters (#2231 ) * Updated ACR60, Mechmini, ALU84 readme information and config.h descripters Update MECHKEYS keyboards to be uniform in readmes and config.h's PID, MANUFACTORER, and DESCRIPTIONS. This allows the keyboards to be more uniform amongst the different types. * Rename keyboards/alu84/keymaps/TurboMech/config.h to keyboards/alu84/keymaps/turbomech * Rename keyboards/alu84/keymaps/turbomech to keyboards/alu84/keymaps/TurboMech/config.h * Fixed folder naming for alu84/keymaps/turbomech * fixed error from compile removed double `return MACRO_NONE;` and `switch (id) {`	2018-01-05 11:37:22 -05:00
rooski15	6bb3fbd4e0	Prime_R (#2221 ) * Rooski15: Add Prime_R Keyboard * Rooski15: Added keymaps to xd60, xd75, planck, and prime_r * Rooski15: Updated prime_r keymap * Rooski15: Added Prime_R and Documentation * Rooski15: Added Prime_R and Documentation * Rooski15: Prime_R - Added futher documentation. * Update config.h Added device information * Update readme.md Updated Planck:EmilyH Readme * Update readme.md Updated XD75:EmilyH Readme	2018-01-04 13:32:51 -05:00
profanum429	9e0b244a34	profanum429@gmail.com (#2222 ) * Added initial in-switch LED support for the Eagle/Viper V2. Currently only has four modes: All ON, Mods/Nums ON, Alphas ON, or All OFF * Revert keymap changes * Changed switch curly bracket to match style.	2018-01-04 01:20:58 -05:00
Daniel Gordon	4b7fcf0af0	Add info.json file for Chimera Ortho (#2217 ) * Add info.json file for Chimera Ortho * Correct LAYOUT to KEYMAP Correct LAYOUT to KEYMAP in chimera ortho's json.info	2018-01-04 01:20:18 -05:00
MechMerlin	22b9303e2a	Keeb json layouts (#2219 ) * info.json committed to support the qmk configurator project These are info.json for each of the keyboards I've contributed to during my time here at QMK * change LAYOUT to KEYMAP to adhere to matrix definitions	2018-01-04 01:19:59 -05:00
skullY	e956c11bc9	Update the urls for atmel tools	2018-01-03 10:00:40 -08:00
MechMerlin	cbc5de67be	Duck Eagle/Viper V2 support (#2216 ) * Preliminary support for Duck Eagle/Viper V2 60% board. This is a copy of the octagon/v2 with things changed to reach a compiling state * Get a 60% keymap compiling, this might not be what the eagle/viper really supports * Update readme to point to correct GeekHack link * Get keymap working on a Duck Eagle * Add code submitted by profanum429 - Add HHKB style top row to v2.h - Modify read_rows function to take into accout the caps lock firmware key - Modify default keymap to match the new v2.h - Adjust readmes * Fix bug related to col 0 not working * Add keymap for mechmerlin * Add profanum429's viper hhkb layout * Add visual representation for mechmerlin layout Add navigation keys to keymap * Add a better visual representation to the mechmerlin keymap * Add profanum429's Viper layout! * Updated profanum429 keymap to match a full HHKB Enabled media keys in rules.mk * Revert "Updated profanum429 keymap to match a full HHKB" This reverts commit ed914160d7e27e6412d2c7c5c1c4fa0a04838667. * Fix default keymap for Eagle * Enable extra keys for audio control support * Modified timings in indicator_leds to accomodate the WS2811S chips on the Eagle/Viper2 PCBs at 800kHz with a 16mHz clock Modified the backlight settings to not interfere with the default RGB underglow code from QMK Modified the order of the LEDs in the LED status bar at the top of the Eagle/Viper2 PCBs (3,2,1,6,5,4,8,7 order) * Cleaned up indicator code to remove unused functions as the RGB underglow uses the default driver provided by QMK Commented out backlighting code in v2.c * update readmes to reflect profanum's awesome contributions and fix typo in make instructions * Remove custom RGB logic and just rely on QMK RGB underglow. We'll leave the backlighting in place for now	2018-01-03 12:17:09 -05:00
TurboMech	9cb1d36974	Added Mechmini 2.0 to Mechmini keyboard folder This creates a v1 and v2 subproject. V1 retains all the same implementations of the bootmapper-ported Mechmnini 1 including #2196. V2 adds the Mechmini 2.0 kayboard support (I know it took me way to long to get it a pull request in). All readme's updated to reflect compiling the two seperate keyboards. Simply either `make mechmini/v1:default` or `make mechmini/v2:defualt`. Utilizing the rules.mk using `make mechmini:default` will automatically create the Mechmini 2 default keymap as this is the current version and has a much wider user base.	2018-01-03 10:32:53 -05:00
Rickard von Essen	0a5d302622	Let's Split: Minor fixes in keymap.c comments - Single quote (') is the un-shifted key, not double quote (") - Fixed alignment	2018-01-02 22:19:10 -05:00
				`@@ -0,0 +1,2 @@`
				`# The Default Mechmini 2.0 Layout - the same as split_space keymap`
				`@@ -0,0 +1,2 @@`
				`# A modified planck layout with arrow cluster`
				`@@ -0,0 +1,2 @@`

				`COMMAND_ENABLE = no # Commands for debug and configuration`
				`@@ -0,0 +1 @@`
				`# Modified keymap for xd75 with numpad on right`