Add layout support for contra.

Add default keymap for contra
Fixed exit status check for brew
2018-03-12 14:22:56 -04:00 · 2018-03-12 14:22:56 -04:00 · 2018-03-09 20:10:44 -08:00 · 2018-03-09 14:27:31 -05:00 · 2018-03-09 13:34:37 -05:00 · 2018-03-09 13:32:50 -05:00
26 changed files with 735 additions and 89 deletions
--- a/keyboards/contra/config.h
+++ b/keyboards/contra/config.h
@@ -0,0 +1,58 @@
+#ifndef CONFIG_H
+#define CONFIG_H
+
+#include "config_common.h"
+
+/* USB Device descriptor parameter */
+#define VENDOR_ID       0xFEED
+#define PRODUCT_ID      0x6060
+#define DEVICE_VER      0x0001
+#define MANUFACTURER    Cartel
+#define PRODUCT         Contra
+#define DESCRIPTION     Keyboard
+
+/* key matrix size */
+#define MATRIX_ROWS 4
+#define MATRIX_COLS 12
+
+/* key matrix pins */
+#define MATRIX_ROW_PINS { F6, B3, B2, B6 }
+#define MATRIX_COL_PINS { F4, F5, B5, B4, E6, D7, C6, D4, D0, D1, D2, D3 }
+#define UNUSED_PINS
+
+/* COL2ROW or ROW2COL */
+#define DIODE_DIRECTION COL2ROW
+
+/* number of backlight levels */
+
+#ifdef BACKLIGHT_PIN
+#define BACKLIGHT_LEVELS 0
+#endif
+
+/* Set 0 if debouncing isn't needed */
+#define DEBOUNCING_DELAY 5
+
+/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
+#define LOCKING_SUPPORT_ENABLE
+
+/* Locking resynchronize hack */
+#define LOCKING_RESYNC_ENABLE
+
+/* key combination for command */
+#define IS_COMMAND() ( \
+    keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
+)
+
+/* prevent stuck modifiers */
+#define PREVENT_STUCK_MODIFIERS
+
+
+#ifdef RGB_DI_PIN
+#define RGBLIGHT_ANIMATIONS
+#define RGBLED_NUM 0
+#define RGBLIGHT_HUE_STEP 8
+#define RGBLIGHT_SAT_STEP 8
+#define RGBLIGHT_VAL_STEP 8
+#endif
+
+#endif
--- a/keyboards/contra/contra.c
+++ b/keyboards/contra/contra.c
@@ -0,0 +1 @@
+#include "contra.h"
--- a/keyboards/contra/contra.h
+++ b/keyboards/contra/contra.h
@@ -0,0 +1,46 @@
+#ifndef KB_H
+#define KB_H
+
+#include "quantum.h"
+
+#define LAYOUT_grid( \
+  K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, \
+  K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, \
+  K200, K201, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, \
+  K300, K301, K302, K303, K304, K305, K306, K307, K308, K309, K310, K311  \
+) { \
+  { K000,  K001,  K002,  K003,  K004,  K005,  K006,  K007,  K008,  K009,  K010,  K011 }, \
+  { K100,  K101,  K102,  K103,  K104,  K105,  K106,  K107,  K108,  K109,  K110,  K111 }, \
+  { K200,  K201,  K202,  K203,  K204,  K205,  K206,  K207,  K208,  K209,  K210,  K211 }, \
+  { K300,  K301,  K302,  K303,  K304,  K305,  K306,  K307,  K308,  K309,  K310,  K311 }  \
+}
+
+#define LAYOUT_mit( \
+  K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, \
+  K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, \
+  K200, K201, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, \
+  K300, K301, K302, K303, K304,    K305,    K307, K308, K309, K310, K311  \
+) { \
+  { K000,  K001,  K002,  K003,  K004,  K005,  K006,  K007,  K008,  K009,  K010,  K011 }, \
+  { K100,  K101,  K102,  K103,  K104,  K105,  K106,  K107,  K108,  K109,  K110,  K111 }, \
+  { K200,  K201,  K202,  K203,  K204,  K205,  K206,  K207,  K208,  K209,  K210,  K211 }, \
+  { K300,  K301,  K302,  K303,  K304,  K305,  K305,  K307,  K308,  K309,  K310,  K311 }  \
+}
+
+#define KC_LAYOUT_grid( \
+  K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, \
+  K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, \
+  K200, K201, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, \
+  K300, K301, K302, K303, K304, K305, K306, K307, K308, K309, K310, K311  \
+) \
+  LAYOUT_grid( \
+    KC_##K000,  KC_##K001,  KC_##K002,  KC_##K003,  KC_##K004,  KC_##K005,  KC_##K006,  KC_##K007,  KC_##K008,  KC_##K009,  KC_##K010,  KC_##K011, \
+    KC_##K100,  KC_##K101,  KC_##K102,  KC_##K103,  KC_##K104,  KC_##K105,  KC_##K106,  KC_##K107,  KC_##K108,  KC_##K109,  KC_##K110,  KC_##K111, \
+    KC_##K200,  KC_##K201,  KC_##K202,  KC_##K203,  KC_##K204,  KC_##K205,  KC_##K206,  KC_##K207,  KC_##K208,  KC_##K209,  KC_##K210,  KC_##K211, \
+    KC_##K300,  KC_##K301,  KC_##K302,  KC_##K303,  KC_##K304,  KC_##K305,  KC_##K306,  KC_##K307,  KC_##K308,  KC_##K309,  KC_##K310,  KC_##K311 \
+    )
+#define KEYMAP LAYOUT_grid
+#define LAYOUT_ortho_4x12 LAYOUT_grid
+#define KC_LAYOUT_ortho_4x12 KC_LAYOUT_grid
+
+#endif
--- a/keyboards/contra/keymaps/dana/config.h
+++ b/keyboards/contra/keymaps/dana/config.h
@@ -0,0 +1,30 @@
+/*
+Copyright 2012 Jun Wako <wakojun@gmail.com>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#ifndef CONFIG_USER_H
+#define CONFIG_USER_H
+
+#include "../../config.h"
+
+
+#undef TAPPING_TERM
+#define TAPPING_TERM 190
+
+#define MUSIC_MASK (keycode != KC_NO)
+#define MIDI_ADVANCED
+
+#endif
--- a/keyboards/contra/keymaps/dana/keymap.c
+++ b/keyboards/contra/keymaps/dana/keymap.c
@@ -0,0 +1,37 @@
+// This is the canonical layout file for the Quantum project. If you want to add another keyboard,
+// this is the style you want to emulate.
+
+#include "contra.h"
+#include "action_layer.h"
+#include "eeconfig.h"
+
+extern keymap_config_t keymap_config;
+
+// Fillers to make layering more clear
+#define _______ KC_TRNS
+#define XXXXXXX KC_NO
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+
+/* Qwerty
+ * ,-----------------------------------------------------------------------------------.
+ * | `    |   Q  |   W  |   E  |   R  |   T  |   Y  |   U  |   I  |   O  |   P  | Bksp |
+ * |------+------+------+------+------+-------------+------+------+------+------+------|
+ * | Tab  |   A  |   S  |   D  |   F  |   G  |   H  |   J  |   K  |   L  |   ;  |  "   |
+ * |------+------+------+------+------+------|------+------+------+------+------+------|
+ * | Shift|   Z  |   X  |   C  |   V  |   B  |   N  |   M  |   ,  |   .  |   /  |Shift |
+ * |------+------+------+------+------+------+------+------+------+------+------+------|
+ * | Brite| Ctrl | Alt  | Cmd  |Lower |    Space    |Raise | Enter| Cmd  |  Alt |Ctrl  |
+ * `-----------------------------------------------------------------------------------'
+ */
+[0] = {
+    { MI_C_4, MI_Cs_4, MI_D_4, MI_Ds_4, MI_E_4, MI_F_4, MI_Fs_4, MI_G_4, MI_Gs_4, MI_A_4, MI_As_4, MI_B_4 },
+    { MI_C_3, MI_Cs_3, MI_D_3, MI_Ds_3, MI_E_3, MI_F_3, MI_Fs_3, MI_G_3, MI_Gs_3, MI_A_3, MI_As_3, MI_B_3 },
+    { MI_C_2, MI_Cs_2, MI_D_2, MI_Ds_2, MI_E_2, MI_F_2, MI_Fs_2, MI_G_2, MI_Gs_2, MI_A_2, MI_As_2, MI_B_2 },
+    { MI_C_1, MI_Cs_1, MI_D_1, MI_Ds_1, MI_E_1, MI_F_1, MI_Fs_1, MI_G_1, MI_Gs_1, MI_A_1, MI_As_1, MI_B_1 }
+}
+};
+
+
+
+
--- a/keyboards/contra/keymaps/dana/readme.md
+++ b/keyboards/contra/keymaps/dana/readme.md
@@ -0,0 +1,6 @@
+# Dana musical MIDI keyboard layout
+
+Has the contra mapped as a MIDI keyboard, where each row is an octave.
+
+The keyboard has only MIDI, nothing else!
+
--- a/keyboards/contra/keymaps/dana/rules.mk
+++ b/keyboards/contra/keymaps/dana/rules.mk
@@ -0,0 +1,25 @@
+
+
+# Build Options
+#   change to "no" to disable the options, or define them in the Makefile in
+#   the appropriate keymap folder that will get included automatically
+#
+BOOTMAGIC_ENABLE = no       # Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE = no        # Mouse keys(+4700)
+EXTRAKEY_ENABLE = no       # Audio control and System control(+450)
+CONSOLE_ENABLE = no         # Console for debug(+400)
+COMMAND_ENABLE = no         # Commands for debug and configuration
+NKRO_ENABLE = yes           # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+BACKLIGHT_ENABLE = no      # Enable keyboard backlight functionality
+MIDI_ENABLE = yes            # MIDI controls
+AUDIO_ENABLE = no            # Audio output on port C6
+UNICODE_ENABLE = no         # Unicode
+BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
+RGBLIGHT_ENABLE = no        # Enable WS2812 RGB underlight
+
+# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
+SLEEP_LED_ENABLE = no    # Breathing sleep LED during USB suspend
+
+ifndef QUANTUM_DIR
+	include ../../../../Makefile
+endif
--- a/keyboards/contra/keymaps/default/config.h
+++ b/keyboards/contra/keymaps/default/config.h
@@ -0,0 +1,42 @@
+#ifndef CONFIG_USER_H
+#define CONFIG_USER_H
+
+#include "config_common.h"
+
+#ifdef AUDIO_ENABLE
+    #define STARTUP_SONG SONG(PLANCK_SOUND)
+    // #define STARTUP_SONG SONG(NO_SOUND)
+
+    #define DEFAULT_LAYER_SONGS { SONG(QWERTY_SOUND), \
+                                  SONG(COLEMAK_SOUND), \
+                                  SONG(DVORAK_SOUND) \
+                                }
+#endif
+
+#define MUSIC_MASK (keycode != KC_NO)
+
+/*
+ * MIDI options
+ */
+
+/* Prevent use of disabled MIDI features in the keymap */
+//#define MIDI_ENABLE_STRICT 1
+
+/* enable basic MIDI features:
+   - MIDI notes can be sent when in Music mode is on
+*/
+                                
+#define MIDI_BASIC
+
+/* enable advanced MIDI features:
+   - MIDI notes can be added to the keymap
+   - Octave shift and transpose
+   - Virtual sustain, portamento, and modulation wheel
+   - etc.
+*/
+//#define MIDI_ADVANCED
+
+/* override number of MIDI tone keycodes (each octave adds 12 keycodes and allocates 12 bytes) */
+//#define MIDI_TONE_KEYCODE_OCTAVES 2
+
+#endif
--- a/keyboards/contra/keymaps/default/keymap.c
+++ b/keyboards/contra/keymaps/default/keymap.c
@@ -0,0 +1,264 @@
+/* Copyright 2015-2017 Jack Humbert
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include "contra.h"
+#include "action_layer.h"
+
+extern keymap_config_t keymap_config;
+
+enum planck_layers {
+  _QWERTY,
+  _COLEMAK,
+  _DVORAK,
+  _LOWER,
+  _RAISE,
+  _PLOVER,
+  _ADJUST
+};
+
+enum planck_keycodes {
+  QWERTY = SAFE_RANGE,
+  COLEMAK,
+  DVORAK,
+  PLOVER,
+  LOWER,
+  RAISE,
+  BACKLIT,
+  EXT_PLV
+};
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+
+/* Qwerty
+ * ,-----------------------------------------------------------------------------------.
+ * | Tab  |   Q  |   W  |   E  |   R  |   T  |   Y  |   U  |   I  |   O  |   P  | Bksp |
+ * |------+------+------+------+------+-------------+------+------+------+------+------|
+ * | Esc  |   A  |   S  |   D  |   F  |   G  |   H  |   J  |   K  |   L  |   ;  |  "   |
+ * |------+------+------+------+------+------|------+------+------+------+------+------|
+ * | Shift|   Z  |   X  |   C  |   V  |   B  |   N  |   M  |   ,  |   .  |   /  |Enter |
+ * |------+------+------+------+------+------+------+------+------+------+------+------|
+ * | Brite| Ctrl | Alt  | GUI  |Lower |    Space    |Raise | Left | Down |  Up  |Right |
+ * `-----------------------------------------------------------------------------------'
+ */
+[_QWERTY] = {
+  {KC_TAB,  KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,    KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,    KC_BSPC},
+  {KC_ESC,  KC_A,    KC_S,    KC_D,    KC_F,    KC_G,    KC_H,    KC_J,    KC_K,    KC_L,    KC_SCLN, KC_QUOT},
+  {KC_LSFT, KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_N,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH, KC_ENT },
+  {BACKLIT, KC_LCTL, KC_LALT, KC_LGUI, LOWER,   KC_SPC,  KC_SPC,  RAISE,   KC_LEFT, KC_DOWN, KC_UP,   KC_RGHT}
+},
+
+/* Colemak
+ * ,-----------------------------------------------------------------------------------.
+ * | Tab  |   Q  |   W  |   F  |   P  |   G  |   J  |   L  |   U  |   Y  |   ;  | Bksp |
+ * |------+------+------+------+------+-------------+------+------+------+------+------|
+ * | Esc  |   A  |   R  |   S  |   T  |   D  |   H  |   N  |   E  |   I  |   O  |  "   |
+ * |------+------+------+------+------+------|------+------+------+------+------+------|
+ * | Shift|   Z  |   X  |   C  |   V  |   B  |   K  |   M  |   ,  |   .  |   /  |Enter |
+ * |------+------+------+------+------+------+------+------+------+------+------+------|
+ * | Brite| Ctrl | Alt  | GUI  |Lower |    Space    |Raise | Left | Down |  Up  |Right |
+ * `-----------------------------------------------------------------------------------'
+ */
+[_COLEMAK] = {
+  {KC_TAB,  KC_Q,    KC_W,    KC_F,    KC_P,    KC_G,    KC_J,    KC_L,    KC_U,    KC_Y,    KC_SCLN, KC_BSPC},
+  {KC_ESC,  KC_A,    KC_R,    KC_S,    KC_T,    KC_D,    KC_H,    KC_N,    KC_E,    KC_I,    KC_O,    KC_QUOT},
+  {KC_LSFT, KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_K,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH, KC_ENT },
+  {BACKLIT, KC_LCTL, KC_LALT, KC_LGUI, LOWER,   KC_SPC,  KC_SPC,  RAISE,   KC_LEFT, KC_DOWN, KC_UP,   KC_RGHT}
+},
+
+/* Dvorak
+ * ,-----------------------------------------------------------------------------------.
+ * | Tab  |   "  |   ,  |   .  |   P  |   Y  |   F  |   G  |   C  |   R  |   L  | Bksp |
+ * |------+------+------+------+------+-------------+------+------+------+------+------|
+ * | Esc  |   A  |   O  |   E  |   U  |   I  |   D  |   H  |   T  |   N  |   S  |  /   |
+ * |------+------+------+------+------+------|------+------+------+------+------+------|
+ * | Shift|   ;  |   Q  |   J  |   K  |   X  |   B  |   M  |   W  |   V  |   Z  |Enter |
+ * |------+------+------+------+------+------+------+------+------+------+------+------|
+ * | Brite| Ctrl | Alt  | GUI  |Lower |    Space    |Raise | Left | Down |  Up  |Right |
+ * `-----------------------------------------------------------------------------------'
+ */
+[_DVORAK] = {
+  {KC_TAB,  KC_QUOT, KC_COMM, KC_DOT,  KC_P,    KC_Y,    KC_F,    KC_G,    KC_C,    KC_R,    KC_L,    KC_BSPC},
+  {KC_ESC,  KC_A,    KC_O,    KC_E,    KC_U,    KC_I,    KC_D,    KC_H,    KC_T,    KC_N,    KC_S,    KC_SLSH},
+  {KC_LSFT, KC_SCLN, KC_Q,    KC_J,    KC_K,    KC_X,    KC_B,    KC_M,    KC_W,    KC_V,    KC_Z,    KC_ENT },
+  {BACKLIT, KC_LCTL, KC_LALT, KC_LGUI, LOWER,   KC_SPC,  KC_SPC,  RAISE,   KC_LEFT, KC_DOWN, KC_UP,   KC_RGHT}
+},
+
+/* Lower
+ * ,-----------------------------------------------------------------------------------.
+ * |   ~  |   !  |   @  |   #  |   $  |   %  |   ^  |   &  |   *  |   (  |   )  | Bksp |
+ * |------+------+------+------+------+-------------+------+------+------+------+------|
+ * | Del  |  F1  |  F2  |  F3  |  F4  |  F5  |  F6  |   _  |   +  |   {  |   }  |  |   |
+ * |------+------+------+------+------+------|------+------+------+------+------+------|
+ * |      |  F7  |  F8  |  F9  |  F10 |  F11 |  F12 |ISO ~ |ISO | | Home | End  |      |
+ * |------+------+------+------+------+------+------+------+------+------+------+------|
+ * |      |      |      |      |      |             |      | Next | Vol- | Vol+ | Play |
+ * `-----------------------------------------------------------------------------------'
+ */
+[_LOWER] = {
+  {KC_TILD, KC_EXLM, KC_AT,   KC_HASH, KC_DLR,  KC_PERC, KC_CIRC, KC_AMPR,    KC_ASTR,    KC_LPRN, KC_RPRN, KC_BSPC},
+  {KC_DEL,  KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_UNDS,    KC_PLUS,    KC_LCBR, KC_RCBR, KC_PIPE},
+  {_______, KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,  S(KC_NUHS), S(KC_NUBS), KC_HOME, KC_END,  _______},
+  {_______, _______, _______, _______, _______, _______, _______, _______,    KC_MNXT,    KC_VOLD, KC_VOLU, KC_MPLY}
+},
+
+/* Raise
+ * ,-----------------------------------------------------------------------------------.
+ * |   `  |   1  |   2  |   3  |   4  |   5  |   6  |   7  |   8  |   9  |   0  | Bksp |
+ * |------+------+------+------+------+-------------+------+------+------+------+------|
+ * | Del  |  F1  |  F2  |  F3  |  F4  |  F5  |  F6  |   -  |   =  |   [  |   ]  |  \   |
+ * |------+------+------+------+------+------|------+------+------+------+------+------|
+ * |      |  F7  |  F8  |  F9  |  F10 |  F11 |  F12 |ISO # |ISO / |Pg Up |Pg Dn |      |
+ * |------+------+------+------+------+------+------+------+------+------+------+------|
+ * |      |      |      |      |      |             |      | Next | Vol- | Vol+ | Play |
+ * `-----------------------------------------------------------------------------------'
+ */
+[_RAISE] = {
+  {KC_GRV,  KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_BSPC},
+  {KC_DEL,  KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_MINS, KC_EQL,  KC_LBRC, KC_RBRC, KC_BSLS},
+  {_______, KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,  KC_NUHS, KC_NUBS, KC_PGUP, KC_PGDN, _______},
+  {_______, _______, _______, _______, _______, _______, _______, _______, KC_MNXT, KC_VOLD, KC_VOLU, KC_MPLY}
+},
+
+/* Plover layer (http://opensteno.org)
+ * ,-----------------------------------------------------------------------------------.
+ * |   #  |   #  |   #  |   #  |   #  |   #  |   #  |   #  |   #  |   #  |   #  |   #  |
+ * |------+------+------+------+------+-------------+------+------+------+------+------|
+ * |      |   S  |   T  |   P  |   H  |   *  |   *  |   F  |   P  |   L  |   T  |   D  |
+ * |------+------+------+------+------+------|------+------+------+------+------+------|
+ * |      |   S  |   K  |   W  |   R  |   *  |   *  |   R  |   B  |   G  |   S  |   Z  |
+ * |------+------+------+------+------+------+------+------+------+------+------+------|
+ * | Exit |      |      |   A  |   O  |             |   E  |   U  |      |      |      |
+ * `-----------------------------------------------------------------------------------'
+ */
+
+[_PLOVER] = {
+  {KC_1,    KC_1,    KC_1,    KC_1,    KC_1,    KC_1,    KC_1,    KC_1,    KC_1,    KC_1,    KC_1,    KC_1   },
+  {XXXXXXX, KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,    KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,    KC_LBRC},
+  {XXXXXXX, KC_A,    KC_S,    KC_D,    KC_F,    KC_G,    KC_H,    KC_J,    KC_K,    KC_L,    KC_SCLN, KC_QUOT},
+  {EXT_PLV, XXXXXXX, XXXXXXX, KC_C,    KC_V,    XXXXXXX, XXXXXXX, KC_N,    KC_M,    XXXXXXX, XXXXXXX, XXXXXXX}
+},
+
+/* Adjust (Lower + Raise)
+ * ,-----------------------------------------------------------------------------------.
+ * |      | Reset|      |      |      |      |      |      |      |      |      |  Del |
+ * |------+------+------+------+------+-------------+------+------+------+------+------|
+ * |      |      |      |Aud on|Audoff|AGnorm|AGswap|Qwerty|Colemk|Dvorak|Plover|      |
+ * |------+------+------+------+------+------|------+------+------+------+------+------|
+ * |      |Voice-|Voice+|Mus on|Musoff|MIDIon|MIDIof|      |      |      |      |      |
+ * |------+------+------+------+------+------+------+------+------+------+------+------|
+ * |      |      |      |      |      |             |      |      |      |      |      |
+ * `-----------------------------------------------------------------------------------'
+ */
+[_ADJUST] = {
+  {_______, RESET,   DEBUG,    RGB_TOG, RGB_MOD, RGB_HUI, RGB_HUD, RGB_SAI, RGB_SAD, RGB_VAI, RGB_VAD, KC_DEL },
+  {_______, _______, MU_MOD,  AU_ON,   AU_OFF,  AG_NORM, AG_SWAP, QWERTY,  COLEMAK, DVORAK,  PLOVER,  _______},
+  {_______, MUV_DE,  MUV_IN,  MU_ON,   MU_OFF,  MI_ON,   MI_OFF,  TERM_ON, TERM_OFF, _______, _______, _______},
+  {_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______}
+}
+
+
+};
+
+#ifdef AUDIO_ENABLE
+  float plover_song[][2]     = SONG(PLOVER_SOUND);
+  float plover_gb_song[][2]  = SONG(PLOVER_GOODBYE_SOUND);
+#endif
+
+bool process_record_user(uint16_t keycode, keyrecord_t *record) {
+  switch (keycode) {
+    case QWERTY:
+      if (record->event.pressed) {
+        print("mode just switched to qwerty and this is a huge string\n");
+        set_single_persistent_default_layer(_QWERTY);
+      }
+      return false;
+      break;
+    case COLEMAK:
+      if (record->event.pressed) {
+        set_single_persistent_default_layer(_COLEMAK);
+      }
+      return false;
+      break;
+    case DVORAK:
+      if (record->event.pressed) {
+        set_single_persistent_default_layer(_DVORAK);
+      }
+      return false;
+      break;
+    case LOWER:
+      if (record->event.pressed) {
+        layer_on(_LOWER);
+        update_tri_layer(_LOWER, _RAISE, _ADJUST);
+      } else {
+        layer_off(_LOWER);
+        update_tri_layer(_LOWER, _RAISE, _ADJUST);
+      }
+      return false;
+      break;
+    case RAISE:
+      if (record->event.pressed) {
+        layer_on(_RAISE);
+        update_tri_layer(_LOWER, _RAISE, _ADJUST);
+      } else {
+        layer_off(_RAISE);
+        update_tri_layer(_LOWER, _RAISE, _ADJUST);
+      }
+      return false;
+      break;
+    case BACKLIT:
+      if (record->event.pressed) {
+        register_code(KC_RSFT);
+        #ifdef BACKLIGHT_ENABLE
+          backlight_step();
+        #endif
+        PORTE &= ~(1<<6);
+      } else {
+        unregister_code(KC_RSFT);
+        PORTE |= (1<<6);
+      }
+      return false;
+      break;
+    case PLOVER:
+      if (record->event.pressed) {
+        #ifdef AUDIO_ENABLE
+          stop_all_notes();
+          PLAY_SONG(plover_song);
+        #endif
+        layer_off(_RAISE);
+        layer_off(_LOWER);
+        layer_off(_ADJUST);
+        layer_on(_PLOVER);
+        if (!eeconfig_is_enabled()) {
+            eeconfig_init();
+        }
+        keymap_config.raw = eeconfig_read_keymap();
+        keymap_config.nkro = 1;
+        eeconfig_update_keymap(keymap_config.raw);
+      }
+      return false;
+      break;
+    case EXT_PLV:
+      if (record->event.pressed) {
+        #ifdef AUDIO_ENABLE
+          PLAY_SONG(plover_gb_song);
+        #endif
+        layer_off(_PLOVER);
+      }
+      return false;
+      break;
+  }
+  return true;
+}
--- a/keyboards/contra/keymaps/default/readme.md
+++ b/keyboards/contra/keymaps/default/readme.md
@@ -0,0 +1,2 @@
+# The Default Contra Layout
+
--- a/keyboards/contra/readme.md
+++ b/keyboards/contra/readme.md
@@ -0,0 +1,16 @@
+CONTRA
+===
+
+![CONTRA](https://cartel.ltd/wp-content/uploads/2018/01/img_3209.jpg)
+
+A 40% keyboard by
+
+Keyboard Maintainer: The QMK Community  
+Hardware Supported: CONTRA  
+Hardware Availability: [CARTEL](https://cartel.ltd/projects/contra/)
+
+Make example for this keyboard (after setting up your build environment):
+
+    make contra:dana
+
+See [build environment setup](https://docs.qmk.fm/build_environment_setup.html) then the [make instructions](https://docs.qmk.fm/make_instructions.html) for more information.
--- a/keyboards/contra/rules.mk
+++ b/keyboards/contra/rules.mk
@@ -0,0 +1,61 @@
+# MCU name
+MCU = atmega32u4
+
+# Processor frequency.
+#     This will define a symbol, F_CPU, in all source code files equal to the
+#     processor frequency in Hz. You can then use this symbol in your source code to
+#     calculate timings. Do NOT tack on a 'UL' at the end, this will be done
+#     automatically to create a 32-bit value in your source code.
+#
+#     This will be an integer division of F_USB below, as it is sourced by
+#     F_USB after it has run through any CPU prescalers. Note that this value
+#     does not *change* the processor frequency - it should merely be updated to
+#     reflect the processor speed set externally so that the code can use accurate
+#     software delays.
+F_CPU = 16000000
+
+#
+# LUFA specific
+#
+# Target architecture (see library "Board Types" documentation).
+ARCH = AVR8
+
+# Input clock frequency.
+#     This will define a symbol, F_USB, in all source code files equal to the
+#     input clock frequency (before any prescaling is performed) in Hz. This value may
+#     differ from F_CPU if prescaling is used on the latter, and is required as the
+#     raw input clock is fed directly to the PLL sections of the AVR for high speed
+#     clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
+#     at the end, this will be done automatically to create a 32-bit value in your
+#     source code.
+#
+#     If no clock division is performed on the input clock inside the AVR (via the
+#     CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
+F_USB = $(F_CPU)
+
+# Interrupt driven control endpoint task(+60)
+OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
+
+
+# Boot Section Size in *bytes*
+OPT_DEFS += -DBOOTLOADER_SIZE=4096
+
+
+# Build Options
+#   change yes to no to disable
+#
+BOOTMAGIC_ENABLE = yes      # Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE = yes       # Mouse keys(+4700)
+EXTRAKEY_ENABLE = yes       # Audio control and System control(+450)
+CONSOLE_ENABLE = no        # Console for debug(+400)
+COMMAND_ENABLE = no        # Commands for debug and configuration
+SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
+NKRO_ENABLE = yes           # USB Nkey Rollover
+BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality on B7 by default
+MIDI_ENABLE = no            # MIDI controls
+UNICODE_ENABLE = no         # Unicode
+BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
+AUDIO_ENABLE = no           # Audio output on port C6
+
+LAYOUTS = ortho_4x12 planck_mit planck_grid
+LAYOUTS_HAS_RGB = no
--- a/keyboards/planck/rules.mk
+++ b/keyboards/planck/rules.mk
@@ -36,7 +36,7 @@ F_USB = $(F_CPU)

 # Bootloader
 #     This definition is optional, and if your keyboard supports multiple bootloaders of
-#     different sizes, comment this out, and the correct address will be loaded 
+#     different sizes, comment this out, and the correct address will be loaded
 #     automatically (+60). See bootloader.mk for all options.
 ifeq ($(strip $(KEYBOARD)), planck/rev3)
    BOOTLOADER = atmel-dfu
@@ -55,7 +55,7 @@ endif
 OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT

 # Build Options
-#   change to "no" to disable the options, or define them in the Makefile in 
+#   change to "no" to disable the options, or define them in the Makefile in
 #   the appropriate keymap folder that will get included automatically
 #
 BOOTMAGIC_ENABLE = no       # Virtual DIP switch configuration(+1000)
@@ -76,5 +76,6 @@ API_SYSEX_ENABLE = no
 SLEEP_LED_ENABLE = no    # Breathing sleep LED during USB suspend

 LAYOUTS = ortho_4x12 planck_mit planck_grid
+LAYOUTS_HAS_RGB = no

 DEFAULT_FOLDER = planck/rev5
--- a/keyboards/viterbi/keymaps/default/rules.mk
+++ b/keyboards/viterbi/keymaps/default/rules.mk
@@ -1,5 +1 @@
 RGBLIGHT_ENABLE = yes
-
-ifndef QUANTUM_DIR
-	include ../../../../Makefile
-endif
--- a/keyboards/viterbi/keymaps/dwallace/rules.mk
+++ b/keyboards/viterbi/keymaps/dwallace/rules.mk
@@ -1,5 +1 @@
 RGBLIGHT_ENABLE = yes
-
-ifndef QUANTUM_DIR
-	include ../../../../Makefile
-endif
--- a/keyboards/viterbi/keymaps/fido/config.h
+++ b/keyboards/viterbi/keymaps/fido/config.h
@@ -0,0 +1,45 @@
+/*
+Copyright 2018 Danny Nguyen <danny@keeb.io>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#ifndef CONFIG_USER_H
+#define CONFIG_USER_H
+
+#include "../../config.h"
+
+/* Use I2C or Serial, not both */
+
+#define USE_SERIAL
+// #define USE_I2C
+
+/* Select hand configuration */
+
+#define MASTER_LEFT
+#ifndef MASTER_LEFT
+    #define MASTER_RIGHT
+#endif
+// #define EE_HANDS
+
+#define TAPPING_TERM 150
+
+#undef RGBLED_NUM
+#define RGBLIGHT_ANIMATIONS
+#define RGBLED_NUM 2
+#define RGBLIGHT_HUE_STEP 8
+#define RGBLIGHT_SAT_STEP 8
+#define RGBLIGHT_VAL_STEP 8
+
+#endif
--- a/keyboards/viterbi/keymaps/fido/keymap.c
+++ b/keyboards/viterbi/keymaps/fido/keymap.c
@@ -0,0 +1,74 @@
+#include "viterbi.h"
+#include "action_layer.h"
+#include "eeconfig.h"
+#ifdef RGBLIGHT_ENABLE
+#include "rgblight.h"
+#endif
+
+extern keymap_config_t keymap_config;
+
+#define _QWERTY 0
+#define _FN 1
+
+#define KC_ KC_TRNS
+#define _______ KC_TRNS
+
+#define KC_FN1 MO(_FN)
+#define KC_WD_L LCTL(KC_LEFT)
+#define KC_WD_R LCTL(KC_RGHT)
+#define KC_RTOG RGB_TOG
+#define KC_RMOD RGB_MOD
+#define KC_RHUI RGB_HUI
+#define KC_RHUD RGB_HUD
+#define KC_RSAI RGB_SAI
+#define KC_RSAD RGB_SAD
+#define KC_RVAI RGB_VAI
+#define KC_RVAD RGB_VAD
+#define KC_RST RESET
+#define KC_CTLZ LCTL(KC_Z)
+#define KC_CTLX LCTL(KC_X)
+#define KC_CTLC LCTL(KC_C)
+#define KC_CTLV LCTL(KC_V)
+#define KC_ATAB LALT(KC_TAB)
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+
+  [_QWERTY] = KC_KEYMAP(
+  //,----+----+----+----+----+----+----.    ,----+----+----+----+----+----+----.
+      1  , 2  , 3  , 4  , 5  , 6  ,ESC ,     DEL , 7  , 8  , 9  , 0  ,MINS,EQL ,
+  //|----+----+----+----+----+----+----|    |----+----+----+----+----+----+----|
+     RBRC, Q  , W  , E  , R  , T  ,TAB ,     BSPC, Y  , U  , I  , O  , P  ,LBRC,
+  //|----+----+----+----+----+----+----|    |----+----+----+----+----+----+----|
+     GRV , A  , S  , D  , F  , G  ,LALT,     CAPS, H  , J  , K  , L  ,SCLN,QUOT,
+  //|----+----+----+----+----+----+----|    |----+----+----+----+----+----+----|
+     BSLS, Z  , X  , C  , V  , B  ,LSFT,     RSFT, N  , M  ,COMM,DOT ,SLSH,ENT ,
+  //|----+----+----+----+----+----+----|    |----+----+----+----+----+----+----|
+     INS ,PSCR,MENU,LGUI,LCTL,SPC ,FN1 ,     FN1 ,SPC ,RCTL,RALT,    ,    ,    
+  //`----+----+----+----+----+----+----'    `----+----+----+----+----+----+----'
+  ),
+
+  [_FN] = KC_KEYMAP(
+  //,----+----+----+----+----+----+----.    ,----+----+----+----+----+----+----.
+      F1 , F2 , F3 , F4 , F5 , F6 ,    ,         , F7 , F8 , F9 ,F10 ,F11 ,F12 ,
+  //|----+----+----+----+----+----+----|    |----+----+----+----+----+----+----|
+         ,PGUP,WD_L, UP ,WD_R,    ,ATAB,         ,RMOD,RHUI,RSAI,RVAI,    ,    ,
+  //|----+----+----+----+----+----+----|    |----+----+----+----+----+----+----|
+         ,HOME,LEFT,DOWN,RGHT,    ,    ,         ,    ,RHUD,RSAD,RVAD,    ,    ,
+  //|----+----+----+----+----+----+----|    |----+----+----+----+----+----+----|
+         ,CTLZ,CTLX,CTLC,CTLV,    ,    ,         ,MUTE,VOLD,VOLU,    ,    ,    ,
+  //|----+----+----+----+----+----+----|    |----+----+----+----+----+----+----|
+         ,    ,    ,    ,    ,    ,    ,         ,    ,    ,    ,    ,    ,    
+  //`----+----+----+----+----+----+----'    `----+----+----+----+----+----+----'
+  )
+
+};
+
+void led_set_user(uint8_t usb_led) {
+  #ifdef RGBLIGHT_ENABLE
+  if (usb_led & (1 << USB_LED_CAPS_LOCK)) {
+    rgblight_enable();
+  } else {
+    rgblight_disable();
+  }
+  #endif //RGBLIGHT_ENABLE
+}
--- a/keyboards/viterbi/keymaps/fido/rules.mk
+++ b/keyboards/viterbi/keymaps/fido/rules.mk
@@ -0,0 +1 @@
+RGBLIGHT_ENABLE = yes
--- a/keyboards/viterbi/keymaps/hexwire/rules.mk
+++ b/keyboards/viterbi/keymaps/hexwire/rules.mk
@@ -1,5 +1 @@
 RGBLIGHT_ENABLE = yes
-
-ifndef QUANTUM_DIR
-	include ../../../../Makefile
-endif
--- a/keyboards/viterbi/split_rgb.c
+++ b/keyboards/viterbi/split_rgb.c
@@ -1,41 +0,0 @@
-#include <stdint.h>
-#include <stdbool.h>
-#include "split_util.h"
-#include "progmem.h"
-#include "print.h"
-#include "rgblight.h"
-
-#ifdef USE_I2C
-#  include "i2c.h"
-#else // USE_SERIAL
-#  include "serial.h"
-#endif
-
-
-rgblight_config_t rgblight_config;
-
-void rgblight_slave_update(void) {
-  //rgblight_effect_christmas();
-}
-
-
-void rgblight_set(void) {
-  if (rgblight_config.enable) {
-    #ifdef RGBW
-      ws2812_setleds_rgbw(led, RGBLED_NUM);
-    #else
-      ws2812_setleds(led, RGBLED_NUM);
-    #endif
-  } else {
-    for (uint8_t i = 0; i < RGBLED_NUM; i++) {
-      led[i].r = 0;
-      led[i].g = 0;
-      led[i].b = 0;
-    }
-    #ifdef RGBW
-      ws2812_setleds_rgbw(led, RGBLED_NUM);
-    #else
-      ws2812_setleds(led, RGBLED_NUM);
-    #endif
-  }
-}
--- a/keyboards/viterbi/split_rgb.h
+++ b/keyboards/viterbi/split_rgb.h
@@ -1,6 +0,0 @@
-#ifndef SPLIT_RGB_H
-#define SPLIT_RGB_H
-
-void rgblight_slave_update(void);
-
-#endif
--- a/keyboards/ymd96/README.md
+++ b/keyboards/ymd96/README.md
@@ -10,7 +10,7 @@ using Bootmapper Client to change any keyboard settings, since not all the
 USB report options are supported.  

 Here is the default layout, it is fairly simple with a few function keys: 
-![YMD96 Layout](https://i.imgur.com/qCwE2ns.png)  
+![YMD96 Layout](https://i.imgur.com/3QnqVPn.png)  
 If you have a different layout (since there were many options during the GB), please feel free to contribute!  

 Keyboard maintainer: [Andrew](https://github.com/sparkyman215)  
@@ -29,27 +29,18 @@ This firmware was modified from [ps2avrGB](https://github.com/qmk/qmk_firmware/t

 ## Installing and Building

-First, install the requirements. These commands are for OSX, but all you
-need is the AVR toolchain and `bootloadHID` for flashing:
-
-```
-$ brew cask install crosspack-avr
-$ brew install --HEAD https://raw.githubusercontent.com/robertgzr/homebrew-tap/master/bootloadhid.rb
-```
-
-In order to use the `./program` script, which can reboot the board into
-the bootloader, you'll need Python 2 with PyUSB installed:
-
-```
-$ pip install pyusb
-```
+Since the YMD96 uses an ATmega32a chip instead of the 32u4, you need to download [HIDBootFlash v.1.0](http://vusb.wikidot.com/project:hidbootflash) for Windows. If anyone knows of a Linux/Mac bootflasher that works, edit this readme!  
+On Windows, I use [MINGw](http://www.mingw.org/) to compile the keymaps. On Linux, you can simply use the terminal. 

+Once you have those two pieces of software:
 Build the keyboard with  
 ```
-$ make ymd96:default  
+$ make ymd96-default  
 ```  
 If you make your own layout, change the `default` word to whatever your layout is.  

+And flash the compiled hex file with `HIDBootFlash`. Simply put the board in flashing mode by plugging it in while holding control, and click `find device`. Then you can specify the .hex file and flash it to the device. 
+
 ## Troubleshooting

 From my experience, it's really hard to brick these boards. But these
@@ -60,3 +51,5 @@ tricks have been useful when it got stuck in a weird scenario.
   done, just reflash the board with the original firmware.
 2. Sometimes USB hubs can act weird, so try connecting the board directly
   to your computer or plugging/unplugging the USB hub.
+   
+Lastly, if you still need help, you can add me on Discord and I'll be happy to help.
--- a/keyboards/ymd96/config.h
+++ b/keyboards/ymd96/config.h
@@ -31,10 +31,13 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define MATRIX_COLS 15
 #define DIODE_DIRECTION ROW2COL

-#define RGBLED_NUM 20
+#define RGB_DI_PIN C4
+#define RGBLED_NUM 18
 #define RGBLIGHT_ANIMATIONS
+#define RGBLIGHT_VAL_STEP 20

 #define NO_UART 1
+#define BOOTLOADHID_BOOTLOADER 1

 /* key combination for command */
 #define IS_COMMAND() (keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)))
--- a/keyboards/ymd96/keymaps/default/keymap.c
+++ b/keyboards/ymd96/keymaps/default/keymap.c
@@ -32,7 +32,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
 	*  |   Tab   |   Q  |   W  |   E  |   R  |   T  |   Y  |   U  |   I  |   O  |    P |    { |    } |     \    |  7   |   8  |   9  |   -  | 18 keys
 	*  |   Caps   |   A  |   S  |   D  |   F  |   G  |   H  |   J  |   K  |   L  |    ; |   '  |     Return     |  4   |   5  |   6  |   +  | 17 keys
 	*  |    LShft     |   Z  |   X  |   C  |   V  |   B  |   N  |   M  |   ,  |   .  |   /  |       RShft       |  1   |   2  |   3  |  En  | 16 keys
-	*  | Ctrl  |  Win  |  Alt  |                  Space                      |  Fn  |  Win | Left | Down |  Up  | Right|   0  |   .  |  ter | 12 keys
+	*  | Ctrl  |  Win  |  Alt  |                  Space                      |  Fn  |  Win | Left | Down |  Up  | Right|   0  |   .  |      | 12 keys
 	*/
 	
    [_DEFLT] = KEYMAP(
@@ -46,17 +46,17 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
 	/* Layer 1, raise layer
 	*  |      |      |      |      |      |      |      |      |      |      |      |      |      |      |      |      |      |      |      |
 	*  |      |      |      |      |      |      |      |      |      |      |      |      |      |             |      |      |      |      |
-	*  |         |      |      |      |      |      |      |      |      |      |      |      |      |          |      |      |      |      |
+	*  |         |      |rgb_up|rgb_dn|rgb_mo|      |      |      |      |      |  F22 |  F23  |  F24 |         |      |      |      |      |
 	*  |          |      |      |      |      |      |      |      |      |      |      |      |                |      |      |      |      |
 	*  |              |      |      |      |      |      |      |      | VolDn| VolUp| Mute |     Play/Pause    |      |      |      |      |
-	*  |       |       |       |                                             |      |      |      |      |      |      |      |      |      |
+	*  |       |       |       |                                             |      |      |MPrev |      |      | MNext|      |      |      |
 	*/ 
 	[_RAISE] = KEYMAP(
-			______,  ______,  ______,  ______,  ______,  ______,  ______,  ______,  ______,  ______,  ______, ______,  ______,  ______,  ______,  ______,  ______,  ______,  ______, \
-			______,  ______,  ______,  ______,  ______,  ______,  ______,  ______,  ______,  ______,  ______,  ______,  ______,  ______,  ______,  ______,  ______,  ______, \
-			______,  ______,  ______,  ______,  ______,  ______,  ______,  ______,  ______,  ______,  KC_F22,  KC_F23,  KC_F24,  ______,  ______,  ______,  ______,  ______, \
-			______,  ______,  ______,  ______,  ______,  ______,  ______,  ______,  ______,  ______,  ______,  ______,  ______,  ______,  ______,  ______,  ______, \
-			______,  ______,  ______,  ______,  ______,  ______,  ______,  ______,  KC_VOLD,KC_VOLU, KC_MUTE,      KC_MPLY,  ______,  ______,  ______,  ______, \
-		    ______,  ______,  ______,                              ______,                        ______,  ______,  ______,  ______,  ______,  ______,  ______,  ______  \
+			______,  ______,  ______,  ______,  ______,  ______,  ______,  ______,  ______,  ______,  ______,  ______,  ______,  ______,  ______,  ______,  ______,  ______,  ______, \
+			______,  ______,  ______,  ______,  ______,  ______,  ______,  ______,  ______,  ______,  ______,  ______,  ______,  ______,           ______,  ______,  ______,  ______, \
+			______,  ______, RGB_VAI, RGB_VAD, RGB_MOD,  ______,  ______,  ______,  ______,  ______,  KC_F22,  KC_F23,  KC_F24,  ______,           ______,  ______,  ______,  ______, \
+			______,  ______,  ______,  ______,  ______,  ______,  ______,  ______,  ______,  ______,  ______,  ______,           ______,           ______,  ______,  ______,  ______, \
+			______,  ______,  ______,  ______,  ______,  ______,  ______,  ______,  KC_VOLD,KC_VOLU, KC_MUTE,                   KC_MPLY,           ______,  ______,  ______,  ______, \
+		    ______,  ______,  ______,                                  ______,                                 ______,  ______, KC_MPRV,  ______,  ______, KC_MNXT,  ______,  ______  \
 	)
 };
--- a/layouts/community/ortho_4x12/bakingpy/rules.mk
+++ b/layouts/community/ortho_4x12/bakingpy/rules.mk
@@ -1,4 +1,4 @@
 # Enable RGB if not a Planck
-ifeq (,$(findstring planck,$(KEYBOARD)))
+ifeq ($(LAYOUTS_HAS_RGB),yes)
 	RGBLIGHT_ENABLE = yes
 endif
--- a/util/macos_install.sh
+++ b/util/macos_install.sh
@@ -1,6 +1,6 @@
 #!/bin/bash

-if brew --version 2>&1 > /dev/null; then
+if ! brew --version 2>&1 > /dev/null; then
 	echo "Error! Homebrew not installed or broken!"
 	echo -n "Would you like to install homebrew now? [y/n] "
 	while read ANSWER; do
Author	SHA1	Message	Date
Joe Wasson	2dacf25f28	Add layout support for contra.	2018-03-12 14:22:56 -04:00
Joe Wasson	bfa34d02b0	Add default keymap for contra	2018-03-12 14:22:56 -04:00
Jon Nall	0b82d08e8d	Fixed exit status check for brew	2018-03-09 20:10:44 -08:00
adiron	fdeb7f7665	Added Contra keyboard support (#2501 ) * Added Contra keyboard support The configuration came from a source distribution of the firmware on the Contra's official website. I have also included a simple MIDI keymap. (And it works!) * Changes to Contra config and README * Readme has been changed as requested by jackhumbert * Config has been changed to add the Cartel and Contra names to the USB configuration.	2018-03-09 14:27:31 -05:00
sparkyman215	141a52982e	update ymdk96 files	2018-03-09 13:34:37 -05:00
Danny	ac5326595c	Add Viterbi fido keymap (#2454 ) * Add fido Viterbi keymap * Cleanup rules files * Remove unused WIP code	2018-03-09 13:32:50 -05:00