Merge pull request #1471 from qmk/lufa_lib

Update LUFA and move it to /lib/lufa
Corrected it again.
2017-07-07 15:33:29 -04:00 · 2017-07-07 15:33:09 -04:00 · 2017-07-07 15:33:09 -04:00 · 2017-07-07 15:33:09 -04:00 · 2017-07-07 15:13:18 -04:00 · 2017-07-07 14:53:47 -04:00
1681 changed files with 304159 additions and 8806 deletions
--- a/.travis.yml
+++ b/.travis.yml
@@ -34,7 +34,7 @@ after_success:
 notifications:
  webhooks:
    urls:
-      - https://webhooks.gitter.im/e/cca31de3d44b9adb617b
-    on_success: change  # options: [always|never|change] default: always
+      - https://webhooks.gitter.im/e/afce403d65f143dfac09
+    on_success: always  # options: [always|never|change] default: always
    on_failure: always  # options: [always|never|change] default: always
    on_start: never     # options: [always|never|change] default: always
--- a/CODE_OF_CONDUCT.md
+++ b/CODE_OF_CONDUCT.md
@@ -0,0 +1,15 @@
+# Code Of Conduct
+
+QMK strives to be an inclusive and tolerant community. We welcome participation from anyone regardless of age, disability, ethnicity, gender identity and expression, level of experience, nationality, personal appearance, political belief, race, religion, or sexual identity and orientation. 
+
+> “A gentle word turns away wrath, but a harsh word stirs up anger.”
+
+Our users, contributors, and collaborators are expected to treat each other with respect, to assume good intentions, and to gently correct, where possible, rather than react with escalation. Some examples of behavior we will not tolerate include, but is not limited to:
+
+* The use of sexualized language or imagery
+* Unwelcome advances, sexual or otherwise
+* Insults or derogatory comments, or personal or political attacks
+* Publishing others’ private information without explicit permission
+* Other conduct which could reasonably be considered inappropriate in a professional setting
+
+If someone is violating this Code of Conduct you may email hello@qmk.fm to bring your concern to the Members. All complaints will be reviewed and investigated and will result in a response that is deemed necessary and appropriate to the circumstances. The project team is obligated to maintain confidentiality with regard to the reporter of an incident. 
--- a/docs/_summary.md
+++ b/docs/_summary.md
@@ -29,3 +29,4 @@
 ### Other topics
 * [General FAQ](faq.md)
 * [Differences from TMK](differences_from_tmk.md)
+* [Using Eclipse with QMK](eclipse.md)
--- a/docs/macros.md
+++ b/docs/macros.md
@@ -41,7 +41,7 @@ A macro can include the following commands:

 ## Sending strings

-Sometimes you just want a key to type out words or phrases. For the most common situations we've provided `SEND_STRING()`, which will type out your string for you instead of having to build a `MACRO()`. Right now it assumes a US keymap with a QWERTY layout, so if you are using something else it may not behave as you expect.
+Sometimes you just want a key to type out words or phrases. For the most common situations we've provided `SEND_STRING()`, which will type out your string for you instead of having to build a `MACRO()`.

 For example:

@@ -58,6 +58,12 @@ const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) {
 };
 ```

+By default, it assumes a US keymap with a QWERTY layout; if you want to change that (e.g. if your OS uses software Colemak), include this somewhere in your keymap:
+
+```
+#include <sendstring_colemak.h>
+```
+
 ## Mapping a Macro to a key

 Use the `M()` function within your `KEYMAP()` to call a macro. For example, here is the keymap for a 2-key keyboard:
--- a/docs/modding_your_keyboard.md
+++ b/docs/modding_your_keyboard.md
@@ -1,7 +1,7 @@

 ## Audio output from a speaker

-Your keyboard can make sounds! If you've got a Planck, Preonic, or basically any keyboard that allows access to the C6 port, you can hook up a simple speaker and make it beep. You can use those beeps to indicate layer transitions, modifiers, special keys, or just to play some funky 8bit tunes.
+Your keyboard can make sounds! If you've got a Planck, Preonic, or basically any keyboard that allows access to the C6 or B5 port (`#define C6_AUDIO` and `#define B5_AUDIO`), you can hook up a simple speaker and make it beep. You can use those beeps to indicate layer transitions, modifiers, special keys, or just to play some funky 8bit tunes.

 The audio code lives in [quantum/audio/audio.h](https://github.com/qmk/qmk_firmware/blob/master/quantum/audio/audio.h) and in the other files in the audio directory. It's enabled by default on the Planck [stock keymap](https://github.com/qmk/qmk_firmware/blob/master/keyboards/planck/keymaps/default/keymap.c). Here are the important bits:

--- a/docs/mouse_keys.md
+++ b/docs/mouse_keys.md
@@ -1,6 +1,6 @@
 # Can I increase the speed of the mouse keys?

-**Q:** The default speed for controlling the mouse with the keyboard is slow. I've tried increasing the mouse's sensitivity at work using xset m and it worked, although sometimes it changes by itself for some reason. At home, on Arch Linux, this does not change ti. I've looked through the forums and resolved to use libinput using xinput but using that I only manage to change the speed of the mouse using the actual mouse. The speed of the mouse using the keyboard controls remained unchanged.
+**Q:** The default speed for controlling the mouse with the keyboard is slow. I've tried increasing the mouse's sensitivity at work using xset m and it worked, although sometimes it changes by itself for some reason. At home, on Arch Linux, this does not change it. I've looked through the forums and resolved to use libinput using xinput but using that I only manage to change the speed of the mouse using the actual mouse. The speed of the mouse using the keyboard controls remained unchanged.
 Is there perhaps something I can input in the keymap.c to change the sensitivity? Or some other surefire way of increasing the speed?
 Thanks!

@@ -14,4 +14,4 @@ Thanks!
 #define MOUSEKEY_WHEEL_DELAY 0
 ```

-Tweak away. A lower interval or higher max speed will effectively make the mouse move faster. Time-to-max controls acceleration. (See [this Reddit thread for the original discussion](https://www.reddit.com/r/ErgoDoxEZ/comments/61fwr2/a_reliable_way_to_increase_the_speed_of_the_mouse/)).
+Tweak away. A lower interval or higher max speed will effectively make the mouse move faster. Time-to-max controls acceleration. (See [this Reddit thread for the original discussion](https://www.reddit.com/r/ErgoDoxEZ/comments/61fwr2/a_reliable_way_to_increase_the_speed_of_the_mouse/)).
--- a/keyboards/alps64/rules.mk
+++ b/keyboards/alps64/rules.mk
@@ -55,12 +55,12 @@ OPT_DEFS += -DBOOTLOADER_SIZE=4096


 # Build Options
-#   comment out to disable the options.
+#   change to no to disable the options.
 #
-BOOTMAGIC_ENABLE ?= yes	# Virtual DIP switch configuration(+1000)
-MOUSEKEY_ENABLE ?= yes	# Mouse keys(+4700)
-EXTRAKEY_ENABLE ?= yes	# Audio control and System control(+450)
-CONSOLE_ENABLE ?= yes	# Console for debug(+400)
-COMMAND_ENABLE ?= yes    # Commands for debug and configuration
-#SLEEP_LED_ENABLE = yes  # Breathing sleep LED during USB suspend
-#NKRO_ENABLE = yes	# USB Nkey Rollover - not yet supported in LUFA
+BOOTMAGIC_ENABLE = yes	# Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE = yes	# Mouse keys(+4700)
+EXTRAKEY_ENABLE = yes	# Audio control and System control(+450)
+CONSOLE_ENABLE = yes	# Console for debug(+400)
+COMMAND_ENABLE = yes    # Commands for debug and configuration
+SLEEP_LED_ENABLE = no  # Breathing sleep LED during USB suspend
+NKRO_ENABLE = no	# USB Nkey Rollover - not yet supported in LUFA
--- a/keyboards/amj60/rules.mk
+++ b/keyboards/amj60/rules.mk
@@ -52,15 +52,15 @@ OPT_DEFS += -DBOOTLOADER_SIZE=4096
 # Build Options
 #   comment out to disable the options.
 #
-BOOTMAGIC_ENABLE ?= no  # Virtual DIP switch configuration(+1000)
-MOUSEKEY_ENABLE  ?= no  # Mouse keys(+4700)
-EXTRAKEY_ENABLE  ?= yes # Audio control and System control(+450)
-CONSOLE_ENABLE   ?= yes # Console for debug(+400)
-COMMAND_ENABLE   ?= yes # Commands for debug and configuration
-NKRO_ENABLE      ?= yes # USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
-RGBLIGHT_ENABLE  ?= yes # Enable keyboard underlight functionality (+4870)
-BACKLIGHT_ENABLE ?= yes # Enable keyboard backlight functionality (+1150)
-MIDI_ENABLE      ?= no  # MIDI controls
-AUDIO_ENABLE     ?= no
-UNICODE_ENABLE   ?= no  # Unicode
-BLUETOOTH_ENABLE ?= no  # Enable Bluetooth with the Adafruit EZ-Key HID
+BOOTMAGIC_ENABLE = no  # Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE  = no  # Mouse keys(+4700)
+EXTRAKEY_ENABLE  = yes # Audio control and System control(+450)
+CONSOLE_ENABLE   = yes # Console for debug(+400)
+COMMAND_ENABLE   = yes # Commands for debug and configuration
+NKRO_ENABLE      = yes # USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+RGBLIGHT_ENABLE  = yes # Enable keyboard underlight functionality (+4870)
+BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality (+1150)
+MIDI_ENABLE      = no  # MIDI controls
+AUDIO_ENABLE     = no
+UNICODE_ENABLE   = no  # Unicode
+BLUETOOTH_ENABLE = no  # Enable Bluetooth with the Adafruit EZ-Key HID
--- a/keyboards/amjpad/rules.mk
+++ b/keyboards/amjpad/rules.mk
@@ -52,15 +52,15 @@ OPT_DEFS += -DBOOTLOADER_SIZE=4096
 # Build Options
 #   comment out to disable the options.
 #
-BOOTMAGIC_ENABLE ?= no	# Virtual DIP switch configuration(+1000)
-MOUSEKEY_ENABLE ?= no	# Mouse keys(+4700)
-EXTRAKEY_ENABLE ?= yes	# Audio control and System control(+450)
-CONSOLE_ENABLE ?= yes	# Console for debug(+400)
-COMMAND_ENABLE ?= yes    # Commands for debug and configuration
-NKRO_ENABLE ?= yes		# USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
-RGBLIGHT_ENABLE ?= no   # Enable keyboard underlight functionality (+4870)
-BACKLIGHT_ENABLE ?= yes  # Enable keyboard backlight functionality (+1150)
-MIDI_ENABLE ?= no 		# MIDI controls
-AUDIO_ENABLE ?= no
-UNICODE_ENABLE ?= no 		# Unicode
-BLUETOOTH_ENABLE ?= no # Enable Bluetooth with the Adafruit EZ-Key HID
+BOOTMAGIC_ENABLE = no	# Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE = no	# Mouse keys(+4700)
+EXTRAKEY_ENABLE = yes	# Audio control and System control(+450)
+CONSOLE_ENABLE = yes	# Console for debug(+400)
+COMMAND_ENABLE = yes    # Commands for debug and configuration
+NKRO_ENABLE = yes		# USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+RGBLIGHT_ENABLE = no   # Enable keyboard underlight functionality (+4870)
+BACKLIGHT_ENABLE = yes  # Enable keyboard backlight functionality (+1150)
+MIDI_ENABLE = no 		# MIDI controls
+AUDIO_ENABLE = no
+UNICODE_ENABLE = no 		# Unicode
+BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
--- a/keyboards/atomic/keymaps/pvc/config.h
+++ b/keyboards/atomic/keymaps/pvc/config.h
@@ -49,6 +49,8 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define BACKLIGHT_PIN B7
 #define BACKLIGHT_BREATHING

+#define C6_AUDIO
+
 /* COL2ROW or ROW2COL */
 #define DIODE_DIRECTION COL2ROW

--- a/keyboards/atomic/rules.mk
+++ b/keyboards/atomic/rules.mk
@@ -52,18 +52,18 @@ OPT_DEFS += -DBOOTLOADER_SIZE=4096
 #   change to "no" to disable the options, or define them in the Makefile in 
 #   the appropriate keymap folder that will get included automatically
 #
-BOOTMAGIC_ENABLE ?= no       # Virtual DIP switch configuration(+1000)
-MOUSEKEY_ENABLE ?= yes       # Mouse keys(+4700)
-EXTRAKEY_ENABLE ?= yes       # Audio control and System control(+450)
-CONSOLE_ENABLE ?= no         # Console for debug(+400)
-COMMAND_ENABLE ?= yes        # Commands for debug and configuration
-NKRO_ENABLE ?= no            # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
-BACKLIGHT_ENABLE ?= yes      # Enable keyboard backlight functionality
-MIDI_ENABLE ?= no            # MIDI controls
-AUDIO_ENABLE ?= no           # Audio output on port C6
-UNICODE_ENABLE ?= no         # Unicode
-BLUETOOTH_ENABLE ?= no       # Enable Bluetooth with the Adafruit EZ-Key HID
-RGBLIGHT_ENABLE ?= no        # Enable WS2812 RGB underlight.  Do not enable this with audio at the same time.
+BOOTMAGIC_ENABLE = no       # Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE = yes       # Mouse keys(+4700)
+EXTRAKEY_ENABLE = yes       # Audio control and System control(+450)
+CONSOLE_ENABLE = no         # Console for debug(+400)
+COMMAND_ENABLE = yes        # Commands for debug and configuration
+NKRO_ENABLE = no            # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+BACKLIGHT_ENABLE = yes      # Enable keyboard backlight functionality
+MIDI_ENABLE = no            # MIDI controls
+AUDIO_ENABLE = no           # Audio output on port C6
+UNICODE_ENABLE = no         # Unicode
+BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
+RGBLIGHT_ENABLE = no        # Enable WS2812 RGB underlight.  Do not enable this with audio at the same time.

 # Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
-SLEEP_LED_ENABLE ?= no    # Breathing sleep LED during USB suspend
+SLEEP_LED_ENABLE = no    # Breathing sleep LED during USB suspend
--- a/keyboards/atreus/rules.mk
+++ b/keyboards/atreus/rules.mk
@@ -64,19 +64,19 @@ OPT_DEFS += -DBOOTLOADER_SIZE=4096
 #   comment out to disable the options.
 #
 #BOOTMAGIC_ENABLE = yes	# Virtual DIP switch configuration(+1000)
-MOUSEKEY_ENABLE ?= yes	# Mouse keys(+4700)
-EXTRAKEY_ENABLE ?= yes	# Audio control and System control(+450)
-CONSOLE_ENABLE ?= yes	# Console for debug(+400)
-COMMAND_ENABLE ?= yes    # Commands for debug and configuration
+MOUSEKEY_ENABLE = yes	# Mouse keys(+4700)
+EXTRAKEY_ENABLE = yes	# Audio control and System control(+450)
+CONSOLE_ENABLE = yes	# Console for debug(+400)
+COMMAND_ENABLE = yes    # Commands for debug and configuration
 # Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
-# SLEEP_LED_ENABLE ?= yes  # Breathing sleep LED during USB suspend
-NKRO_ENABLE ?= yes		# USB Nkey Rollover - not yet supported in LUFA
-# BACKLIGHT_ENABLE ?= yes  # Enable keyboard backlight functionality
-# MIDI_ENABLE ?= YES 		# MIDI controls
-UNICODE_ENABLE ?= YES 		# Unicode
-# BLUETOOTH_ENABLE ?= yes # Enable Bluetooth with the Adafruit EZ-Key HID
+# SLEEP_LED_ENABLE = yes  # Breathing sleep LED during USB suspend
+NKRO_ENABLE = yes		# USB Nkey Rollover - not yet supported in LUFA
+# BACKLIGHT_ENABLE = yes  # Enable keyboard backlight functionality
+# MIDI_ENABLE = YES 		# MIDI controls
+UNICODE_ENABLE = YES 		# Unicode
+# BLUETOOTH_ENABLE = yes # Enable Bluetooth with the Adafruit EZ-Key HID

-USB ?= /dev/cu.usbmodem1411
+USB = /dev/cu.usbmodem1411

 upload: build
 	$(ATREUS_UPLOAD_COMMAND)
--- a/keyboards/atreus62/rules.mk
+++ b/keyboards/atreus62/rules.mk
@@ -51,16 +51,16 @@ OPT_DEFS += -DBOOTLOADER_SIZE=4096
 #   change to "no" to disable the options, or define them in the Makefile in
 #   the appropriate keymap folder that will get included automatically
 #
-BOOTMAGIC_ENABLE ?= no       # Virtual DIP switch configuration(+1000)
-MOUSEKEY_ENABLE ?= yes       # Mouse keys(+4700)
-EXTRAKEY_ENABLE ?= yes       # Audio control and System control(+450)
-CONSOLE_ENABLE ?= yes         # Console for debug(+400)
-COMMAND_ENABLE ?= yes        # Commands for debug and configuration
-NKRO_ENABLE ?= no            # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
-#BACKLIGHT_ENABLE ?= no      # Enable keyboard backlight functionality
-#MIDI_ENABLE ?= no            # MIDI controls
-UNICODE_ENABLE ?= yes         # Unicode
-#BLUETOOTH_ENABLE ?= yes       # Enable Bluetooth with the Adafruit EZ-Key HID
+BOOTMAGIC_ENABLE = no       # Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE = yes       # Mouse keys(+4700)
+EXTRAKEY_ENABLE = yes       # Audio control and System control(+450)
+CONSOLE_ENABLE = yes         # Console for debug(+400)
+COMMAND_ENABLE = yes        # Commands for debug and configuration
+NKRO_ENABLE = no            # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+#BACKLIGHT_ENABLE = no      # Enable keyboard backlight functionality
+#MIDI_ENABLE = no            # MIDI controls
+UNICODE_ENABLE = yes         # Unicode
+#BLUETOOTH_ENABLE = yes       # Enable Bluetooth with the Adafruit EZ-Key HID

 # Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
-SLEEP_LED_ENABLE ?= no    # Breathing sleep LED during USB suspend
+SLEEP_LED_ENABLE = no    # Breathing sleep LED during USB suspend
--- a/keyboards/bantam44/rules.mk
+++ b/keyboards/bantam44/rules.mk
@@ -53,15 +53,15 @@ OPT_DEFS += -DBOOTLOADER_SIZE=512
 # Build Options
 #   comment out to disable the options.
 #
-BOOTMAGIC_ENABLE ?= yes	# Virtual DIP switch configuration(+1000)
-MOUSEKEY_ENABLE ?= yes	# Mouse keys(+4700)
-EXTRAKEY_ENABLE ?= yes	# Audio control and System control(+450)
-CONSOLE_ENABLE ?= yes	# Console for debug(+400)
-COMMAND_ENABLE ?= yes    # Commands for debug and configuration
+BOOTMAGIC_ENABLE = yes	# Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE = yes	# Mouse keys(+4700)
+EXTRAKEY_ENABLE = yes	# Audio control and System control(+450)
+CONSOLE_ENABLE = yes	# Console for debug(+400)
+COMMAND_ENABLE = yes    # Commands for debug and configuration
 # Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
-# SLEEP_LED_ENABLE ?= yes  # Breathing sleep LED during USB suspend
-# NKRO_ENABLE ?= yes		# USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
-# BACKLIGHT_ENABLE ?= yes  # Enable keyboard backlight functionality
-# MIDI_ENABLE ?= YES 		# MIDI controls
-# UNICODE_ENABLE ?= YES 		# Unicode
-# BLUETOOTH_ENABLE ?= yes # Enable Bluetooth with the Adafruit EZ-Key HID
+# SLEEP_LED_ENABLE = yes  # Breathing sleep LED during USB suspend
+# NKRO_ENABLE = yes		# USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+# BACKLIGHT_ENABLE = yes  # Enable keyboard backlight functionality
+# MIDI_ENABLE = YES 		# MIDI controls
+# UNICODE_ENABLE = YES 		# Unicode
+# BLUETOOTH_ENABLE = yes # Enable Bluetooth with the Adafruit EZ-Key HID
--- a/keyboards/chibios_test/rules.mk
+++ b/keyboards/chibios_test/rules.mk
@@ -1,8 +1,8 @@
 #BOOTMAGIC_ENABLE = yes	# Virtual DIP switch configuration
-MOUSEKEY_ENABLE ?= yes	# Mouse keys
-EXTRAKEY_ENABLE ?= yes	# Audio control and System control
-CONSOLE_ENABLE ?= yes	# Console for debug
-COMMAND_ENABLE ?= yes    # Commands for debug and configuration
-SLEEP_LED_ENABLE ?= yes  # Breathing sleep LED during USB suspend
-NKRO_ENABLE ?= yes	    # USB Nkey Rollover
-CUSTOM_MATRIX ?= yes # Custom matrix file
+MOUSEKEY_ENABLE = yes	# Mouse keys
+EXTRAKEY_ENABLE = yes	# Audio control and System control
+CONSOLE_ENABLE = yes	# Console for debug
+COMMAND_ENABLE = yes    # Commands for debug and configuration
+SLEEP_LED_ENABLE = yes  # Breathing sleep LED during USB suspend
+NKRO_ENABLE = yes	    # USB Nkey Rollover
+CUSTOM_MATRIX = yes # Custom matrix file
--- a/keyboards/clueboard/keymaps/magicmonty/config.h
+++ b/keyboards/clueboard/keymaps/magicmonty/config.h
@@ -26,13 +26,8 @@
 /* override number of MIDI tone keycodes (each octave adds 12 keycodes and allocates 12 bytes) */
 #define MIDI_TONE_KEYCODE_OCTAVES 2

-/* Disabling rollover allows you to use the opposite shift key to cancel the space cadet state in the event
-   of an erroneous press instead of emitting a pair of parentheses when the keys are released.
-*/
-#define DISABLE_SPACE_CADET_ROLLOVER
-
 /*
-  Setting the Space Cadet Parens for German layout
+  Setting the modified Space Cadet Parens for German layout

  Default is
  #define LSPO_KEY KC_9
@@ -40,5 +35,6 @@
 */
 #define LSPO_KEY KC_8
 #define RSPC_KEY KC_9
+#define PERMISSIVE_HOLD

 #endif
--- a/keyboards/clueboard/keymaps/magicmonty/keymap.c
+++ b/keyboards/clueboard/keymaps/magicmonty/keymap.c
@@ -4,8 +4,6 @@
 #define GRAVE_MODS  (MOD_BIT(KC_LSHIFT)|MOD_BIT(KC_RSHIFT)|MOD_BIT(KC_LGUI)|MOD_BIT(KC_RGUI)|MOD_BIT(KC_LALT)|MOD_BIT(KC_RALT))
 #define _______ KC_TRNS
 #define xxxxxxx KC_NO
-#define HPR_TAB ALL_T(KC_TAB)
-#define CTL_ESC CTL_T(KC_ESC)

 // Each layer gets a name for readability, which is then used in the keymap matrix below.
 // The underscores don't mean anything - you can have a layer called STUFF or any other name.
@@ -23,14 +21,34 @@
  #define TO_MIDI _______
 #endif

+// go back to base layer
 #define TO_BASE TO(_BL)
+
+// switch to function layer while helde
 #define MO_FUNC MO(_FL)
+
+// switch to media layer  while held
 #define   MEDIA MO(_ME)
+
+// switch to Control layer while helde
 #define  MO_CTL MO(_CL)
+
+// switch to mouse layer if held, else space
 #define L_MOUSE LT(_ML, KC_SPC)
+
+// Function key when held, else ESC
 #define ESC_FUN LT(_FL, KC_ESC)

+// Hyper (CTRL+ALT+SHIFT+SUPER) when held, TAB when tapped
+#define HPR_TAB ALL_T(KC_TAB)
+
+// CTRL when held, ESC when tapped
+#define CTL_ESC CTL_T(KC_ESC)
+
+// ESC/Grave mode
 #define ESC_GRV F(0)
+
+// Reset RGB mode to layer signalling
 #define RGB_RST F(1)

 const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
@@ -39,15 +57,15 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
    ESC_GRV,    KC_1,    KC_2,   KC_3,     KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,     KC_0, KC_MINS,   KC_EQL, _______, KC_BSPC,          KC_INS,  \
    HPR_TAB,    KC_Q,    KC_W,   KC_E,     KC_R,    KC_T,    KC_Y,    KC_U,    KC_I,    KC_O,     KC_P, KC_LBRC,  KC_RBRC, KC_BSLS,                   KC_DEL,  \
    ESC_FUN,    KC_A,    KC_S,   KC_D,     KC_F,    KC_G,    KC_H,    KC_J,    KC_K,    KC_L,  KC_SCLN, KC_QUOT,  KC_NUHS,  KC_ENT,                            \
-    KC_LSPO, KC_NUBS,    KC_Z,   KC_X,     KC_C,    KC_V,    KC_B,    KC_N,    KC_M, KC_COMM,   KC_DOT, KC_SLSH,  _______, KC_RSPC,          KC_UP,            \
+    KC_LSFT, KC_NUBS,    KC_Z,   KC_X,     KC_C,    KC_V,    KC_B,    KC_N,    KC_M, KC_COMM,   KC_DOT, KC_SLSH,  _______, KC_RSFT,          KC_UP,            \
    KC_LCTL, KC_LGUI, KC_LALT,_______,                    L_MOUSE, L_MOUSE,                    _______, KC_RALT,  KC_RCTL, MO_FUNC, KC_LEFT, KC_DOWN, KC_RGHT),

-  /* Keymap _FL: Function Layer */
+  /* Keymap _FL: Function layer */
  [_FL] = KEYMAP(
     KC_GRV,   KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,   KC_F12, _______, _______,          BL_STEP, \
    _______, _______, _______, _______, _______, _______, _______, _______, KC_PSCR, _______,  KC_PAUS, _______,  _______, _______,                   _______, \
    _______, _______,  MO_CTL, _______, _______, _______, KC_LEFT, KC_DOWN,   KC_UP, KC_RGHT,  _______, _______,  _______, _______,                            \
-    _______, _______, _______, _______, _______, _______, _______, _______,   MEDIA, _______,  _______, TO_MIDI,  _______, _______,          KC_PGUP,          \
+    KC_LSPO, _______, _______, _______, _______, _______, _______, _______,   MEDIA, _______,  _______, TO_MIDI,  _______, KC_RSPC,          KC_PGUP,          \
    _______, _______, _______, _______,                   _______, _______,                    _______, _______,  _______, MO_FUNC, KC_HOME, KC_PGDN, KC_END),

  /* Keymap _ME: Media layer */
@@ -70,9 +88,9 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
  [_ML] = KEYMAP(
    _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,  _______, _______,  _______, _______, _______,          _______, \
    _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,  _______, _______,  _______, _______,                   _______, \
-    _______, _______, KC_BTN3, KC_BTN2, KC_BTN1, _______, KC_MS_L, KC_MS_D, KC_MS_U, KC_MS_R,  _______, _______,  _______, _______,                            \
+    _______, _______, KC_BTN2, KC_BTN3, KC_BTN1, _______, KC_MS_L, KC_MS_D, KC_MS_U, KC_MS_R,  _______, _______,  _______, _______,                            \
    _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,  _______, _______,  _______, _______,          KC_MS_U,          \
-    _______, _______, _______, _______,                   L_MOUSE, L_MOUSE,                    _______, KC_BTN1,  KC_BTN2, KC_BTN3, KC_MS_L, KC_MS_D, KC_MS_R),
+    _______, _______, _______, _______,                   L_MOUSE, L_MOUSE,                    _______, KC_BTN1,  KC_BTN3, KC_BTN2, KC_MS_L, KC_MS_D, KC_MS_R),

 #if defined(MIDI_ENABLE) && defined(MIDI_ADVANCED)
  /* Keymap _MI: MIDI layer (Advanced)*/
@@ -179,6 +197,47 @@ void clueboard_set_led(uint8_t id, uint8_t val) {
  }
 };

+const uint16_t oct_hues[10] = {
+  0,
+  30,
+  60,
+  90,
+  120,
+  150,
+  180,
+  210,
+  240,
+  300
+};
+
+#define MAX_OCT  9
+
+void clueboard_set_midi_led(uint8_t base_oct, uint8_t val)
+{
+  uint8_t sat = 255;
+
+  for (uint8_t i = 0; i < RGBLED_NUM; i++) {
+    sethsv(oct_hues[base_oct], sat, val, (LED_TYPE *)&led[i]);
+  }
+
+  uint8_t next_oct = base_oct < MAX_OCT ? base_oct + 1 : base_oct;
+
+  uint16_t next_hue = base_oct < MAX_OCT ? oct_hues[next_oct] : 0;
+  uint8_t next_val = base_oct < MAX_OCT ? val : 0;
+  uint8_t next_sat = base_oct < MAX_OCT ? sat : 0;
+
+
+  for (uint8_t i = 0; i < 3; i++) {
+    sethsv(next_hue, next_sat, next_val, (LED_TYPE *)&led[i]);
+  }
+
+  for (uint8_t i = 11; i < 14; i++) {
+    sethsv(next_hue, next_sat, next_val, (LED_TYPE *)&led[i]);
+  }
+
+  rgblight_set();
+}
+
 void matrix_scan_user(void) {
    rgblight_config_t rgblight_config;
    rgblight_config.raw = eeconfig_read_rgblight();
@@ -197,10 +256,10 @@ void matrix_scan_user(void) {
        clueboard_set_led(LAYER_FUNCTION, val);
      }
    } else if (layer & (1<<_ML)) {
-        clueboard_set_led(LAYER_MOUSE, val);
+      clueboard_set_led(LAYER_MOUSE, val);
 #if defined(MIDI_ENABLE)
    } else if (layer & (1<<_MI)) {
-        clueboard_set_led(LAYER_MIDI, val);
+      clueboard_set_midi_led(midi_config.octave, val);
 #endif
    } else {
        clueboard_set_led(LAYER_BASE, val);
--- a/keyboards/clueboard/keymaps/magicmonty/readme.md
+++ b/keyboards/clueboard/keymaps/magicmonty/readme.md
@@ -2,23 +2,42 @@

 [Keyboard Layout Editor File]

-![Clueboard Layout Image](http://i.imgur.com/WFfJ15k.png)
+![Clueboard Layout Image](http://i.imgur.com/eEwjLEj.png)
+My ClueBoard Layout as of 2017/06/30
+

 This layout is a combination of the `mouse_keys` and the `win_optimized` layouts.
 This layout is optimized for an ISO layout.
+The CapsLock is disabled and works as ESC when tapped and FN when held.
+The `TAB` key works as `TAB` when tapped, and [HYPER] (`CTRL` + `ALT` + `SHIFT` + `CMD`) when held.

-It adds a mouse layer. When you hold down the spacebar the arrow keys
-will move your mouse cursor. You can click using the 3 mods to the left of the
-arrow keys, or the 3 keys under your primary fingers on the home row.
+## Mouse Layer
+
+When you hold down the spacebar the arrow keys will move your mouse cursor.
+You can click using the 3 mods to the left of the arrow keys, or the 3 keys under your primary fingers on the home row.
 The Left, Down, Up and Right for the mouse movement are also VIM-Like on the HJKL keys

-There is also a MIDI layer included.
+## MIDI layer

-The CapsLock is disabled and works as Escape when tapped and Fn when Hold.
-The Tab key works as Tab when tapped, and [Hyper] (Ctrl + Alt + Shift + Cmd) when hold
-The Shift-Keys are configured as [Space Cadet Shift Parentheses]
+The MIDI layer is permanently enabled by pressing `FN` + `/`.
+It can be exited with the `ESC`-Key

-There is also a separate media layer with Volume/Play controls
+## Space Cadet(ish) Shift Parentheses
+
+If the function layer is active, the `SHIFT`-Keys are configured like the [Space Cadet Shift Parentheses]
+as opened (left `SHIFT`) and closed (right `SHIFT`) parentheses if tapped and `SHIFT` if held.
+
+## Media layer
+
+The media layer with Volume/Play controls, can be accessed via `FN` + `m`
+
+## Control layer
+
+The control layer is accessed via `FN` + `s`.
+Here one can control the behavior of the RGB underlight.
+`FN` + `s` + `1` resets the RGB underlight to the Layer signalling mode
+
+## Layer signalling through underlight

 The different layers are signalled throug setting of the underlight:

@@ -29,6 +48,6 @@ The different layers are signalled throug setting of the underlight:
 - Control layer: Red
 - Midi layer: Purple

-[Hyper]: http://brettterpstra.com/2012/12/08/a-useful-caps-lock-key/
+[HYPER]: http://brettterpstra.com/2012/12/08/a-useful-caps-lock-key/
 [Space Cadet Shift Parentheses]: http://stevelosh.com/blog/2012/10/a-modern-space-cadet/#shift-parentheses
 [Keyboard Layout Editor File]: http://www.keyboard-layout-editor.com/#/gists/f869b8789242a712e0f46eabbd550056
--- a/keyboards/clueboard/readme.md
+++ b/keyboards/clueboard/readme.md
@@ -1,97 +1,17 @@
-Clueboard keyboard firmware
-======================
+# Clueboard 66%

-DIY/Assembled compact 66% keyboard by [Clueboard](http://clueboard.co).
+![Clueboard](https://static1.squarespace.com/static/55c13bdee4b099be5dcb82eb/t/5867eeaad2b857fd0d196f4b/1494021396651/IMGP4201.jpg?format=1500w)

-For the full Quantum Mechanical Keyboard feature list, see [the parent readme.md](/readme.md).
+A fully customizable 66% keyboard.

-## First Time Setup
+* Keyboard Maintainer: [Zach White](https://github.com/skullydazed)
+* Hardware Supported: Clueboard 66% PCB
+  * rev1 (1.0)
+  * rev2 (2.0, 2.0.1, 2.1, 2.5, 2.5.1, 2.6)
+* Hardware Availability: [clueboard.co](https://clueboard.co/)

-Download or clone the whole firmware and navigate to the keyboards/clueboard directory. Once your dev env is setup, you'll be able to generate the default .hex:
+Make example for this keyboard (after setting up your build environment):

-```
-$ make
-```
+    make cluepad-default

-You will see a lot of output and if everything worked correctly you will see something similar to this:
-
-```
-Size after:
-   text	   data	    bss	    dec	    hex	filename
-      0	  19992	      0	  19992	   4e18	clueboard_rev2_default.hex
-```
-
-At this point you can press RESET on your Clueboard and flash your keyboard with this command:
-
-```
-$ make dfu
-```
-
-If you would like to use one of the alternative keymaps, or create your own, see below.
-
-## Clueboard 1.0
-
-If you have a first generation Clueboard (one with a black PCB) you will need to use the revision 1 code. To do so add `rev1` to your make command, like this:
-
-```
-$ make rev1
-```
-
-And when flashing your keyboard:
-
-```
-$ make rev1-dfu
-```
-
-If you are flashing an alternative layout to your rev1, include both `rev1` and `<keymap>` in your command, for example when flashing max:
-
-```
-$ make rev1-max-dfu
-```
-
-## Alternate Keymaps
-
-There are many alternative and user-contributed layouts available in the [keymaps/](keymaps/) directory. To compile and flash an alternative you will want to add `<keymap>` to your command:
-
-```
-$ make skully
-```
-
-And when flashing your keyboard, put `<keymap>` between "make" and "dfu":
-
-```
-$ make skully-dfu
-```
-
-### Notable Layouts
-
-These layouts are notable for one reason or another. If you are looking for ideas or inspiration you should look at these first:
-
-* [keymaps/default](keymaps/default) - The default Clueboard layout
-* [keymaps/max](keymaps/max) - A maximised layout that makes use of every key and feature of the Clueboard 2.0 PCB.
-* [keymaps/skully](keymaps/skully) - The layout that @skullydazed uses on his own Clueboards.
-
-## Create Your Own Keymap
-
-There are a lot of possibilities when creating your own keymap, and the primary documentation for doing that is [Customizing Your Keymap](/readme.md##customizing-your-keymap) in the main readme.md. As a way to get started, here is the procedure I recommend:
-
-* Copy `[keymaps/default](keymaps/default/)` to `keymaps/<your_layout>`.
-* Compile the firmware (`$ make <your_layout>`)
-* Flash the firmware (`$ make <your_layout>-dfu`)
-* Make sure everything works like the default keyboard
-* Modify `keymaps/<your_layout>/readme.md` to tell others about your layout.
-* Modify `keymaps/<your_layout>/keymap.c` to reflect your desired layout.
-* Compile your new custom firmware (`$ make <your_layout>`)
-** If you have warnings you may flash without fixing them, but something may not work right.
-** If you have any errors you must fix them before continuing.
-* Flash the firmware (`$ make <your_layout>-dfu`)
-
-## Share Your Keymap
-
-Got your layout dialed in? Please share it with the world so we can benefit from your work! Simply submit a pull request with your layout and we'll include it in the official repository. Please use the following guidelines when putting together your pull request:
-
-* Include a readme.md that states what your primary keyboard use is, how your layout differs from the default, and highlights anything you think makes your layout particularly great.
-* If your layout requires certain features (EG, RGB underlight or backlighting) ensure you have a Makefile and config.h that reflects that
-* If your layout requires special hardware to be added, please describe that in the readme.md
-
-TODO: Write up or link quick how-to on creating and submitting a PR. (Pull requests accepted. :)
+See [build environment setup](https://docs.qmk.fm/build_environment_setup.html) then the [make instructions](https://docs.qmk.fm/make_instructions.html) for more information.
--- a/keyboards/clueboard/rules.mk
+++ b/keyboards/clueboard/rules.mk
@@ -90,14 +90,14 @@ OPT_DEFS += -DBOOTLOADER_SIZE=4096
 # Build Options
 #   comment out to disable the options.
 #
-BOOTMAGIC_ENABLE ?= no 	# Virtual DIP switch configuration(+1000)
-MOUSEKEY_ENABLE ?= no	# Mouse keys(+4700)
-EXTRAKEY_ENABLE ?= no 	# Audio control and System control(+450)
-CONSOLE_ENABLE ?= yes	# Console for debug(+400)
-COMMAND_ENABLE ?= yes   # Commands for debug and configuration
-NKRO_ENABLE ?= yes		# USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
-AUDIO_ENABLE ?= no
-RGBLIGHT_ENABLE ?= yes  # Enable keyboard underlight functionality
-MIDI_ENABLE ?= no 		# MIDI controls
-UNICODE_ENABLE ?= no 		# Unicode
-BLUETOOTH_ENABLE ?= no # Enable Bluetooth with the Adafruit EZ-Key HID
+BOOTMAGIC_ENABLE = no 	# Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE = no	# Mouse keys(+4700)
+EXTRAKEY_ENABLE = no 	# Audio control and System control(+450)
+CONSOLE_ENABLE = yes	# Console for debug(+400)
+COMMAND_ENABLE = yes   # Commands for debug and configuration
+NKRO_ENABLE = yes		# USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+AUDIO_ENABLE = no
+RGBLIGHT_ENABLE = yes  # Enable keyboard underlight functionality
+MIDI_ENABLE = no 		# MIDI controls
+UNICODE_ENABLE = no 		# Unicode
+BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
--- a/keyboards/cluecard/readme.md
+++ b/keyboards/cluecard/readme.md
@@ -1,28 +1,13 @@
-cluecard keyboard firmware
-======================
+# Cluecard

-## Quantum MK Firmware
+A simple QMK dev kit.

-For the full Quantum feature list, see [the parent readme.md](/doc/readme.md).
+* Keyboard Maintainer: [Zach White](https://github.com/skullydazed)
+* Hardware Supported: Cluecard 1.0
+* Hardware Availability: Special gift from [skullydazed](https://github.com/skullydazed)

-## Building
+Make example for this keyboard (after setting up your build environment):

-Download or clone the whole firmware and navigate to the keyboards/cluecard folder. Once your dev env is setup, you'll be able to type `make` to generate your .hex - you can then use the Teensy Loader to program your .hex file.
+    make cluecard-default

-Depending on which keymap you would like to use, you will have to compile slightly differently.
-
-### Default
-
-To build with the default keymap, simply run `make default`.
-
-### Other Keymaps
-
-Several version of keymap are available in advance but you are recommended to define your favorite layout yourself. To define your own keymap create a folder with the name of your keymap in the keymaps folder, and see keymap documentation (you can find in top readme.md) and existant keymap files.
-
-To build the firmware binary hex file with a keymap just do `make` with a keymap like this:
-
-```
-$ make [default|jack|<name>]
-```
-
-Keymaps follow the format **__keymap.c__** and are stored in folders in the `keymaps` folder, eg `keymaps/my_keymap/`
+See [build environment setup](https://docs.qmk.fm/build_environment_setup.html) then the [make instructions](https://docs.qmk.fm/make_instructions.html) for more information.
--- a/keyboards/cluecard/rules.mk
+++ b/keyboards/cluecard/rules.mk
@@ -53,18 +53,18 @@ OPT_DEFS += -DBOOTLOADER_SIZE=4096
 # Build Options
 #   change yes to no to disable
 #
-BOOTMAGIC_ENABLE ?= no      # Virtual DIP switch configuration(+1000)
-MOUSEKEY_ENABLE ?= yes       # Mouse keys(+4700)
-EXTRAKEY_ENABLE ?= yes       # Audio control and System control(+450)
-CONSOLE_ENABLE ?= yes        # Console for debug(+400)
-COMMAND_ENABLE ?= yes        # Commands for debug and configuration
+BOOTMAGIC_ENABLE = no      # Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE = yes       # Mouse keys(+4700)
+EXTRAKEY_ENABLE = yes       # Audio control and System control(+450)
+CONSOLE_ENABLE = yes        # Console for debug(+400)
+COMMAND_ENABLE = yes        # Commands for debug and configuration
 # Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
-SLEEP_LED_ENABLE ?= no       # Breathing sleep LED during USB suspend
+SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
 # if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
-NKRO_ENABLE ?= no            # USB Nkey Rollover
-RGBLIGHT_ENABLE ?= yes       # Enable keyboard underlight functionality (+4870)
-BACKLIGHT_ENABLE ?= yes       # Enable keyboard backlight functionality by default
-MIDI_ENABLE ?= no            # MIDI controls
-UNICODE_ENABLE ?= no         # Unicode
-BLUETOOTH_ENABLE ?= no       # Enable Bluetooth with the Adafruit EZ-Key HID
-AUDIO_ENABLE ?= yes           # Audio output on port C6
+NKRO_ENABLE = no            # USB Nkey Rollover
+RGBLIGHT_ENABLE = yes       # Enable keyboard underlight functionality (+4870)
+BACKLIGHT_ENABLE = yes       # Enable keyboard backlight functionality by default
+MIDI_ENABLE = no            # MIDI controls
+UNICODE_ENABLE = no         # Unicode
+BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
+AUDIO_ENABLE = yes           # Audio output on port C6
--- a/keyboards/cluepad/readme.md
+++ b/keyboards/cluepad/readme.md
@@ -1,4 +1,15 @@
-Cluepad number pad firmware
-======================
+# Cluepad

-TODO: to be updated.
+![Cluepad](https://static1.squarespace.com/static/55c13bdee4b099be5dcb82eb/5842fbdce3df28eae5ec557e/5844fb2cb8a79bbdfd63bad1/1498501250178/IMGP3931.jpg?format=750w)
+
+A basic 17 key numpad PCB.
+
+* Keyboard Maintainer: [Zach White](https://github.com/skullydazed)
+* Hardware Supported: Cluepad PCB 1.0
+* Hardware Availability: [clueboard.co](https://clueboard.co/)
+
+Make example for this keyboard (after setting up your build environment):
+
+    make cluepad-default
+
+See [build environment setup](https://docs.qmk.fm/build_environment_setup.html) then the [make instructions](https://docs.qmk.fm/make_instructions.html) for more information.
--- a/keyboards/cluepad/rules.mk
+++ b/keyboards/cluepad/rules.mk
@@ -52,14 +52,14 @@ OPT_DEFS += -DBOOTLOADER_SIZE=4096
 # Build Options
 #   comment out to disable the options.
 #
-BOOTMAGIC_ENABLE ?= yes	# Virtual DIP switch configuration(+1000)
-# MOUSEKEY_ENABLE ?= yes	# Mouse keys(+4700)
-# EXTRAKEY_ENABLE ?= yes	# Audio control and System control(+450)
-# CONSOLE_ENABLE ?= yes	# Console for debug(+400)
-# COMMAND_ENABLE ?= yes    # Commands for debug and configuration
-NKRO_ENABLE ?= yes		# USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
-BACKLIGHT_ENABLE ?= yes  # Enable numpad's backlight functionality
-RGBLIGHT_ENABLE ?= yes
-# MIDI_ENABLE ?= YES 		# MIDI controls
-# UNICODE_ENABLE ?= YES 		# Unicode
-# BLUETOOTH_ENABLE ?= yes # Enable Bluetooth with the Adafruit EZ-Key HID
+BOOTMAGIC_ENABLE = yes	# Virtual DIP switch configuration(+1000)
+# MOUSEKEY_ENABLE = yes	# Mouse keys(+4700)
+# EXTRAKEY_ENABLE = yes	# Audio control and System control(+450)
+# CONSOLE_ENABLE = yes	# Console for debug(+400)
+# COMMAND_ENABLE = yes    # Commands for debug and configuration
+NKRO_ENABLE = yes		# USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+BACKLIGHT_ENABLE = yes  # Enable numpad's backlight functionality
+RGBLIGHT_ENABLE = yes
+# MIDI_ENABLE = YES 		# MIDI controls
+# UNICODE_ENABLE = YES 		# Unicode
+# BLUETOOTH_ENABLE = yes # Enable Bluetooth with the Adafruit EZ-Key HID
--- a/keyboards/converter/ibm_terminal/keymaps/default/Makefile
+++ b/keyboards/converter/ibm_terminal/keymaps/default/Makefile
@@ -2,24 +2,24 @@
 #   change to "no" to disable the options, or define them in the Makefile in 
 #   the appropriate keymap folder that will get included automatically
 #
-BOOTMAGIC_ENABLE ?= no       # Virtual DIP switch configuration(+1000)
-MOUSEKEY_ENABLE ?= yes        # Mouse keys(+4700)
-EXTRAKEY_ENABLE ?= yes       # Audio control and System control(+450)
-CONSOLE_ENABLE ?= no         # Console for debug(+400)
-COMMAND_ENABLE ?= no         # Commands for debug and configuration
-NKRO_ENABLE ?= yes           # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
-BACKLIGHT_ENABLE ?= no       # Enable keyboard backlight functionality
-MIDI_ENABLE ?= no            # MIDI controls
-AUDIO_ENABLE ?= no           # Audio output on port C6
-UNICODE_ENABLE ?= no         # Unicode
-UNICODEMAP_ENABLE ?= yes
-BLUETOOTH_ENABLE ?= no       # Enable Bluetooth with the Adafruit EZ-Key HID
-RGBLIGHT_ENABLE ?= no        # Enable WS2812 RGB underlight.  Do not enable this with audio at the same time.
-PS2_USE_USART ?= yes
-API_SYSEX_ENABLE ?= no
+BOOTMAGIC_ENABLE = no       # Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE = yes        # Mouse keys(+4700)
+EXTRAKEY_ENABLE = yes       # Audio control and System control(+450)
+CONSOLE_ENABLE = no         # Console for debug(+400)
+COMMAND_ENABLE = no         # Commands for debug and configuration
+NKRO_ENABLE = yes           # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality
+MIDI_ENABLE = no            # MIDI controls
+AUDIO_ENABLE = no           # Audio output on port C6
+UNICODE_ENABLE = no         # Unicode
+UNICODEMAP_ENABLE = yes
+BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
+RGBLIGHT_ENABLE = no        # Enable WS2812 RGB underlight.  Do not enable this with audio at the same time.
+PS2_USE_USART = yes
+API_SYSEX_ENABLE = no

 # Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
-SLEEP_LED_ENABLE ?= no    # Breathing sleep LED during USB suspend
+SLEEP_LED_ENABLE = no    # Breathing sleep LED during USB suspend

 ifndef QUANTUM_DIR
 	include ../../../../../Makefile
--- a/keyboards/converter/ibm_terminal/keymaps/priyadi/Makefile
+++ b/keyboards/converter/ibm_terminal/keymaps/priyadi/Makefile
@@ -2,24 +2,24 @@
 #   change to "no" to disable the options, or define them in the Makefile in 
 #   the appropriate keymap folder that will get included automatically
 #
-BOOTMAGIC_ENABLE ?= no       # Virtual DIP switch configuration(+1000)
-MOUSEKEY_ENABLE ?= yes        # Mouse keys(+4700)
-EXTRAKEY_ENABLE ?= yes       # Audio control and System control(+450)
-CONSOLE_ENABLE ?= no         # Console for debug(+400)
-COMMAND_ENABLE ?= no         # Commands for debug and configuration
-NKRO_ENABLE ?= yes           # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
-BACKLIGHT_ENABLE ?= no       # Enable keyboard backlight functionality
-MIDI_ENABLE ?= no            # MIDI controls
-AUDIO_ENABLE ?= no           # Audio output on port C6
-UNICODE_ENABLE ?= no         # Unicode
-UNICODEMAP_ENABLE ?= yes
-BLUETOOTH_ENABLE ?= no       # Enable Bluetooth with the Adafruit EZ-Key HID
-RGBLIGHT_ENABLE ?= no        # Enable WS2812 RGB underlight.  Do not enable this with audio at the same time.
-PS2_USE_USART ?= yes
-API_SYSEX_ENABLE ?= no
+BOOTMAGIC_ENABLE = no       # Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE = yes        # Mouse keys(+4700)
+EXTRAKEY_ENABLE = yes       # Audio control and System control(+450)
+CONSOLE_ENABLE = no         # Console for debug(+400)
+COMMAND_ENABLE = no         # Commands for debug and configuration
+NKRO_ENABLE = yes           # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality
+MIDI_ENABLE = no            # MIDI controls
+AUDIO_ENABLE = no           # Audio output on port C6
+UNICODE_ENABLE = no         # Unicode
+UNICODEMAP_ENABLE = yes
+BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
+RGBLIGHT_ENABLE = no        # Enable WS2812 RGB underlight.  Do not enable this with audio at the same time.
+PS2_USE_USART = yes
+API_SYSEX_ENABLE = no

 # Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
-SLEEP_LED_ENABLE ?= no    # Breathing sleep LED during USB suspend
+SLEEP_LED_ENABLE = no    # Breathing sleep LED during USB suspend

 ifndef QUANTUM_DIR
 	include ../../../../../Makefile
--- a/keyboards/converter/ibm_terminal/rules.mk
+++ b/keyboards/converter/ibm_terminal/rules.mk
@@ -49,24 +49,24 @@ OPT_DEFS += -DBOOTLOADER_SIZE=4096
 #   change to "no" to disable the options, or define them in the Makefile in 
 #   the appropriate keymap folder that will get included automatically
 #
-BOOTMAGIC_ENABLE ?= no       # Virtual DIP switch configuration(+1000)
-MOUSEKEY_ENABLE ?= yes        # Mouse keys(+4700)
-EXTRAKEY_ENABLE ?= yes       # Audio control and System control(+450)
-CONSOLE_ENABLE ?= no         # Console for debug(+400)
-COMMAND_ENABLE ?= no         # Commands for debug and configuration
-NKRO_ENABLE ?= yes           # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
-BACKLIGHT_ENABLE ?= no       # Enable keyboard backlight functionality
-MIDI_ENABLE ?= no            # MIDI controls
-AUDIO_ENABLE ?= no           # Audio output on port C6
-UNICODE_ENABLE ?= no         # Unicode
-UNICODEMAP_ENABLE ?= yes
-BLUETOOTH_ENABLE ?= no       # Enable Bluetooth with the Adafruit EZ-Key HID
-RGBLIGHT_ENABLE ?= no        # Enable WS2812 RGB underlight.  Do not enable this with audio at the same time.
-PS2_USE_USART ?= yes
-API_SYSEX_ENABLE ?= n
+BOOTMAGIC_ENABLE = no       # Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE = yes        # Mouse keys(+4700)
+EXTRAKEY_ENABLE = yes       # Audio control and System control(+450)
+CONSOLE_ENABLE = no         # Console for debug(+400)
+COMMAND_ENABLE = no         # Commands for debug and configuration
+NKRO_ENABLE = yes           # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality
+MIDI_ENABLE = no            # MIDI controls
+AUDIO_ENABLE = no           # Audio output on port C6
+UNICODE_ENABLE = no         # Unicode
+UNICODEMAP_ENABLE = yes
+BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
+RGBLIGHT_ENABLE = no        # Enable WS2812 RGB underlight.  Do not enable this with audio at the same time.
+PS2_USE_USART = yes
+API_SYSEX_ENABLE = n
 CUSTOM_MATRIX = yes

 # Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
-SLEEP_LED_ENABLE ?= no    # Breathing sleep LED during USB suspend
+SLEEP_LED_ENABLE = no    # Breathing sleep LED during USB suspend

 SRC = matrix.c led.c
--- a/keyboards/dk60/config.h
+++ b/keyboards/dk60/config.h
@@ -23,7 +23,7 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
    /* USB Device descriptor parameter */
    #define VENDOR_ID       0xFEED
    #define PRODUCT_ID      0x6060
-    #define DEVICE_VER      0x0003
+    #define DEVICE_VER      0x0001
    #define MANUFACTURER    DARKOU
    #define PRODUCT         DK60
    #define DESCRIPTION     QMK keyboard firmware for DK60 support
--- a/keyboards/dk60/readme.md
+++ b/keyboards/dk60/readme.md
@@ -1,8 +1,17 @@
-DK60 keyboard firmware
-======================
+DK60
+===

-Another 60% keyboard with different HHKB layout
+![DK60](https://github.com/Dbroqua/DK60/raw/master/Previews/DK60.png)

-More information here: https://github.com/Dbroqua/DK60
+Another 60% keyboard with different HHKB layout made and sold by dbroqua. [More info on github/dbroqua](https://github.com/Dbroqua/DK60/)
+
+* Keyboard Maintainer: [Damien Broqua aka DarKou](https://github.com/Dbroqua)
+* Hardware Supported: DK60 PCB revA
+
+Make example for this keyboard (after setting up your build environment):
+
+    make dk60-default
+
+See [build environment setup](https://docs.qmk.fm/build_environment_setup.html) then the [make instructions](https://docs.qmk.fm/make_instructions.html) for more information.

 Open Hardware project!
--- a/keyboards/dk60/rules.mk
+++ b/keyboards/dk60/rules.mk
@@ -5,17 +5,17 @@ F_USB = $(F_CPU)
 OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
 OPT_DEFS += -DBOOTLOADER_SIZE=4096

-BOOTMAGIC_ENABLE ?= yes	# Virtual DIP switch configuration(+1000)
-MOUSEKEY_ENABLE ?= no	# Mouse keys(+4700)
-EXTRAKEY_ENABLE ?= yes	# Audio control and System control(+450)
-# CONSOLE_ENABLE ?= yes	# Console for debug(+400)
-# COMMAND_ENABLE ?= yes    # Commands for debug and configuration
-KEYBOARD_LOCK_ENABLE ?= yes	# Allow locking of keyboard via magic key
-NKRO_ENABLE ?= yes		# USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
-RGBLIGHT_ENABLE ?= no   # Enable keyboard underlight functionality (+4870)
-BACKLIGHT_ENABLE ?= no  # Enable keyboard backlight functionality (+1150)
-MIDI_ENABLE ?= no 		# MIDI controls
-AUDIO_ENABLE ?= no
-UNICODE_ENABLE ?= yes 		# Unicode
-BLUETOOTH_ENABLE ?= no # Enable Bluetooth with the Adafruit EZ-Key HID
-SLEEP_LED_ENABLE ?= yes
+BOOTMAGIC_ENABLE = yes	# Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE = no	# Mouse keys(+4700)
+EXTRAKEY_ENABLE = yes	# Audio control and System control(+450)
+# CONSOLE_ENABLE = yes	# Console for debug(+400)
+# COMMAND_ENABLE = yes    # Commands for debug and configuration
+KEYBOARD_LOCK_ENABLE = yes	# Allow locking of keyboard via magic key
+NKRO_ENABLE = yes		# USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+RGBLIGHT_ENABLE = no   # Enable keyboard underlight functionality (+4870)
+BACKLIGHT_ENABLE = no  # Enable keyboard backlight functionality (+1150)
+MIDI_ENABLE = no 		# MIDI controls
+AUDIO_ENABLE = no
+UNICODE_ENABLE = yes 		# Unicode
+BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
+SLEEP_LED_ENABLE = yes
--- a/keyboards/eco/Makefile
+++ b/keyboards/eco/Makefile
@@ -0,0 +1,5 @@
+SUBPROJECT_DEFAULT = rev1
+
+ifndef MAKEFILE_INCLUDED
+	include ../../Makefile
+endif
--- a/keyboards/eco/config.h
+++ b/keyboards/eco/config.h
@@ -0,0 +1,77 @@
+/*
+Copyright 2012 Jun Wako <wakojun@gmail.com>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#ifndef CONFIG_H
+#define CONFIG_H
+
+#include "config_common.h"
+
+/* USB Device descriptor parameter */
+#define VENDOR_ID       0x1337
+#define PRODUCT_ID      0x6006
+#define MANUFACTURER    Bishop Keyboards
+#define PRODUCT         The ECO Keyboard
+#define DESCRIPTION     An economical ortholinear keyboard
+
+/* key matrix size */
+#define MATRIX_ROWS 4
+#define MATRIX_COLS 14
+
+#define CATERINA_BOOTLOADER
+
+/* COL2ROW or ROW2COL */
+#define DIODE_DIRECTION COL2ROW
+
+/* define if matrix has ghost */
+//#define MATRIX_HAS_GHOST
+
+/* Set 0 if debouncing isn't needed */
+#define DEBOUNCING_DELAY 5
+
+/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
+#define LOCKING_SUPPORT_ENABLE
+/* Locking resynchronize hack */
+#define LOCKING_RESYNC_ENABLE
+
+/* key combination for command */
+#define IS_COMMAND() ( \
+    keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
+)
+
+/*
+ * Feature disable options
+ *  These options are also useful to firmware size reduction.
+ */
+
+/* disable debug print */
+//#define NO_DEBUG
+
+/* disable print */
+//#define NO_PRINT
+
+/* disable action features */
+//#define NO_ACTION_LAYER
+//#define NO_ACTION_TAPPING
+//#define NO_ACTION_ONESHOT
+//#define NO_ACTION_MACRO
+//#define NO_ACTION_FUNCTION
+
+#ifdef SUBPROJECT_rev1
+    #include "rev1/config.h"
+#endif
+
+#endif
--- a/keyboards/eco/eco.c
+++ b/keyboards/eco/eco.c
@@ -0,0 +1 @@
+#include "eco.h"
--- a/keyboards/eco/eco.h
+++ b/keyboards/eco/eco.h
@@ -0,0 +1,10 @@
+#ifndef ECO_H
+#define ECO_H
+
+#ifdef SUBPROJECT_rev1
+    #include "rev1.h"
+#endif
+
+#include "quantum.h"
+
+#endif
--- a/keyboards/eco/keymaps/that_canadian/Makefile
+++ b/keyboards/eco/keymaps/that_canadian/Makefile
@@ -0,0 +1,25 @@
+
+
+# Build Options
+#   change to "no" to disable the options, or define them in the Makefile in 
+#   the appropriate keymap folder that will get included automatically
+#
+BOOTMAGIC_ENABLE = no       # Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE = yes       # Mouse keys(+4700)
+EXTRAKEY_ENABLE = yes       # Audio control and System control(+450)
+CONSOLE_ENABLE = no         # Console for debug(+400)
+COMMAND_ENABLE = no        # Commands for debug and configuration
+NKRO_ENABLE = yes            # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+BACKLIGHT_ENABLE = no      # Enable keyboard backlight functionality
+MIDI_ENABLE = no            # MIDI controls
+AUDIO_ENABLE = no          # Audio output on port C6
+UNICODE_ENABLE = no         # Unicode
+BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
+RGBLIGHT_ENABLE = no        # Enable WS2812 RGB underlight.  Do not enable this with audio at the same time.
+
+# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
+SLEEP_LED_ENABLE = no    # Breathing sleep LED during USB suspend
+
+ifndef QUANTUM_DIR
+	include ../../../../Makefile
+endif
--- a/keyboards/eco/keymaps/that_canadian/keymap.c
+++ b/keyboards/eco/keymaps/that_canadian/keymap.c
@@ -0,0 +1,217 @@
+// This is the canonical layout file for the Quantum project. If you want to add another keyboard,
+// this is the style you want to emulate.
+
+// Below layout is based upon /u/That-Canadian's planck layout
+
+#include "eco.h"
+#include "action_layer.h"
+#ifdef AUDIO_ENABLE
+  #include "audio.h"
+#endif
+#include "eeconfig.h"
+
+extern keymap_config_t keymap_config;
+
+// Each layer gets a name for readability, which is then used in the keymap matrix below.
+// The underscores don't mean anything - you can have a layer called STUFF or any other name.
+// Layer names don't all need to be of the same length, obviously, and you can also skip them
+// entirely and just use numbers.
+#define _QWERTY 0
+#define _LOWER 2
+#define _RAISE 3
+
+#define _FUNCTION 15
+#define _ADJUST 16
+
+enum eco_keycodes {
+  QWERTY = SAFE_RANGE,
+  LOWER,
+  RAISE
+};
+
+// Fillers to make layering more clear
+#define _______ KC_TRNS
+#define XXXXXXX KC_NO
+
+// Defines for task manager and such
+#define CALTDEL LCTL(LALT(KC_DEL))
+#define TSKMGR LCTL(LSFT(KC_ESC))
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+
+/* Qwerty
+ * ,-------------------------------------------------------------------------------------------------.
+ * | Tab  |   Q  |   W  |   E  |   R  |   T  |   (  |   )  |   Y  |   U  |   I  |   O  |   P  | Bksp |
+ * |------+------+------+------+------+------+------+------+------+------+------+------+------+------|
+ * | Func |   A  |   S  |   D  |   F  |   G  |   [  |   ]  |   H  |   J  |   K  |   L  |   ;  | Enter|
+ * |------+------+------+------+------+------+------+------+------+------+------+------+------+------|
+ * | Shift|   Z  |   X  |   C  |   V  |   B  |   {  |   }  |   N  |   M  |   ,  |   .  |   /  |  '   |
+ * |------+------+------+------+------+------+------+------+------+------+------+------+------+------|
+ * | Ctrl |  `   | GUI  | Alt  |Lower | Space|Pg-dwn| Pg-up| Space|Raise | Left | Down |  Up  |Right |
+ * `-------------------------------------------------------------------------------------------------'
+ */
+[_QWERTY] = {
+  {KC_TAB,  	  KC_Q,   KC_W,    KC_E,    KC_R,  KC_T,   KC_LPRN, KC_RPRN, KC_Y,   KC_U,  KC_I,    KC_O,    KC_P,    KC_BSPC},
+  {MO(_FUNCTION), KC_A,   KC_S,    KC_D,    KC_F,  KC_G,   KC_LBRC, KC_RBRC, KC_H,   KC_J,  KC_K,    KC_L,    KC_SCLN, KC_ENT},
+  {OSM(MOD_LSFT), KC_Z,   KC_X,    KC_C,    KC_V,  KC_B,   KC_LCBR, KC_RCBR, KC_N,   KC_M,  KC_COMM, KC_DOT,  KC_SLSH, KC_QUOT},
+  {KC_LCTL, 	  KC_GRV, KC_LGUI, KC_LALT, LOWER, KC_SPC, KC_PGDN, KC_PGUP, KC_SPC, RAISE, KC_LEFT, KC_DOWN, KC_UP,   KC_RGHT}
+},
+
+/* Lower
+ * ,-------------------------------------------------------------------------------------------------.
+ * | Esc  |   !  |   @  |   #  |   $  |   %  |      |      |   ^  |   &  |   *  |   (  |   )  | Del  |
+ * |------+------+------+------+------+------+------+------+------+------+------+------+------+------|
+ * |      |  F1  |  F2  |  F3  |  F4  |  F5  |      |      |  F6  |   _  |   +  |   {  |   }  |Enter |
+ * |------+------+------+------+------+------+------+------+------+------+------+------+------+------|
+ * |      |  F7  |  F8  |  F9  |  F10 |  F11 |      |      |  F12 |      |      | Mute |      |  |   |
+ * |------+------+------+------+------+------+------+------+------+------+------+------+------+------|
+ * |      |      |      |      |Lower |      |      |      | Bksp |Raise | Next | Vol- | Vol+ | Play |
+ * `-------------------------------------------------------------------------------------------------'
+ */
+[_LOWER] = {
+  {KC_ESC,  KC_EXLM, KC_AT,   KC_HASH, KC_DLR,  KC_PERC, _______, _______, KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN, KC_DEL},
+  {_______, KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   _______, _______, KC_F6,   KC_UNDS, KC_PLUS, KC_LCBR, KC_RCBR, _______},
+  {_______, KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  _______, _______, KC_F12,  _______, _______, KC_MUTE, _______, KC_PIPE},
+  {_______, _______, _______, _______, _______, _______, _______, _______, KC_BSPC, _______, KC_MNXT, KC_VOLD, KC_VOLU, KC_MPLY}
+},
+
+/* Raise
+ * ,-------------------------------------------------------------------------------------------------.
+ * | Esc  |   1  |   2  |   3  |   4  |   5  |      |      |   6  |   7  |   8  |   9  |   0  | Del  |
+ * |------+------+------+------+------+------+------+------+------+------+------+------+------+------|
+ * |      |   4  |   5  |   6  |   +  |      |      |      |      |   -  |   =  |   [  |   ]  |Enter |
+ * |------+------+------+------+------+------+------+------+------+------+------+------+------+------|
+ * |Enter |   7  |   8  |   9  |   -  |      |      |      |      |      |      | Mute |      |   \  |
+ * |------+------+------+------+------+------+------+------+------+------+------+------+------+------|
+ * |      |   ,  |   0  |  .   |Lower | Bksp |      |      |      |Raise | Next | Vol- | Vol+ | Play |
+ * `-------------------------------------------------------------------------------------------------'
+ */
+[_RAISE] = {
+  {KC_ESC,  KC_1,    KC_2, KC_3,   KC_4,    KC_5,    _______, _______, KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_DEL},
+  {_______, KC_4,    KC_5, KC_6,   KC_PLUS, _______, _______, _______, _______, KC_MINS, KC_EQL,  KC_LBRC, KC_RBRC, _______},
+  {KC_ENT,  KC_7,    KC_8, KC_9,   KC_MINS, _______, _______, _______, _______, _______, _______, KC_MUTE, _______, KC_BSLS},
+  {_______, KC_COMM, KC_0, KC_DOT, _______, KC_BSPC, _______, _______, _______, _______, KC_MNXT, KC_VOLD, KC_VOLU, KC_MPLY}
+},
+
+/* Adjust (Lower + Raise)
+ * ,-------------------------------------------------------------------------------------------------.
+ * |Taskmg| Reset|      |      |      |      |      |      |      |      |      |      |      |caltde|
+ * |------+------+------+------+------+------+------+------+------+------+------+------+------+------|
+ * |      |      |      |      |      |      |      |      |      |      |      |      |      |      |
+ * |------+------+------+------+------+------+------+------+------+------+------+------+------+------|
+ * |      |      |      |      |      |      |      |      |      |      |      |      |      |      |
+ * |------+------+------+------+------+------+------+------+------+------+------+------+------+------|
+ * |      |      |      |      |      |      |      |      |      |      |      |      |      |      |
+ * `-------------------------------------------------------------------------------------------------'
+ */
+[_ADJUST] = {
+  {TSKMGR,  RESET,   _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, CALTDEL},
+  {_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______},
+  {_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______},
+  {_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______}
+},
+
+/* Function
+ * ,-------------------------------------------------------------------------------------------------.
+ * |      |      |      |      |      |      |      |      |      |      |  Up  |      |      |      |
+ * |------+------+------+------+------+------+------+------+------+------+------+------+------+------|
+ * |      |      |      |      |      |      |      |      |      | Left | Down |Right |      |      |
+ * |------+------+------+------+------+------+------+------+------+------+------+------+------+------|
+ * | Caps |      |      |      |      |      |      |      |      |      |      |      |      |      |
+ * |------+------+------+------+------+------+------+------+------+------+------+------+------+------|
+ * |      |      |      |      |      |      |      |      |      |      |      |      |      |      |
+ * `-------------------------------------------------------------------------------------------------'
+ */
+[_FUNCTION] = {
+  {_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_UP,   _______, _______, _______},
+  {_______, _______, _______, _______, _______, _______, _______, _______, _______, KC_LEFT, KC_DOWN, KC_RGHT, _______, _______},
+  {KC_CAPS, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______},
+  {_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______}
+}
+
+};
+
+#ifdef AUDIO_ENABLE
+
+float tone_startup[][2]    = SONG(STARTUP_SOUND);
+float tone_qwerty[][2]     = SONG(QWERTY_SOUND);
+float tone_dvorak[][2]     = SONG(DVORAK_SOUND);
+float tone_colemak[][2]    = SONG(COLEMAK_SOUND);
+float music_scale[][2]     = SONG(MUSIC_SCALE_SOUND);
+
+float tone_goodbye[][2] = SONG(GOODBYE_SOUND);
+#endif
+
+
+void persistant_default_layer_set(uint16_t default_layer) {
+  eeconfig_update_default_layer(default_layer);
+  default_layer_set(default_layer);
+}
+
+bool process_record_user(uint16_t keycode, keyrecord_t *record) {
+  switch (keycode) {
+    case QWERTY:
+      if (record->event.pressed) {
+        #ifdef AUDIO_ENABLE
+          PLAY_NOTE_ARRAY(tone_qwerty, false, 0);
+        #endif
+        persistant_default_layer_set(1UL<<_QWERTY);
+      }
+      return false;
+      break;
+    case LOWER:
+      if (record->event.pressed) {
+        layer_on(_LOWER);
+        update_tri_layer(_LOWER, _RAISE, _ADJUST);
+      } else {
+        layer_off(_LOWER);
+        update_tri_layer(_LOWER, _RAISE, _ADJUST);
+      }
+      return false;
+      break;
+    case RAISE:
+      if (record->event.pressed) {
+        layer_on(_RAISE);
+        update_tri_layer(_LOWER, _RAISE, _ADJUST);
+      } else {
+        layer_off(_RAISE);
+        update_tri_layer(_LOWER, _RAISE, _ADJUST);
+      }
+      return false;
+      break;
+  }
+  return true;
+}
+
+void matrix_init_user(void) {
+    #ifdef AUDIO_ENABLE
+        startup_user();
+    #endif
+}
+
+#ifdef AUDIO_ENABLE
+
+void startup_user()
+{
+    _delay_ms(20); // gets rid of tick
+    PLAY_NOTE_ARRAY(tone_startup, false, 0);
+}
+
+void shutdown_user()
+{
+    PLAY_NOTE_ARRAY(tone_goodbye, false, 0);
+    _delay_ms(150);
+    stop_all_notes();
+}
+
+void music_on_user(void)
+{
+    music_scale_user();
+}
+
+void music_scale_user(void)
+{
+    PLAY_NOTE_ARRAY(music_scale, false, 0);
+}
+
+#endif
--- a/keyboards/eco/keymaps/that_canadian/readme.md
+++ b/keyboards/eco/keymaps/that_canadian/readme.md
@@ -0,0 +1 @@
+# ECO Layout by u/That-Canadian
--- a/keyboards/eco/readme.md
+++ b/keyboards/eco/readme.md
@@ -0,0 +1,15 @@
+ECO
+===
+
+![ECO](http://i.imgur.com/YligKxr.jpg)
+
+An economical 4x14 ortholinear keyboard
+
+Keyboard Maintainer: BishopKeyboards and That-Canadian
+Hardware Supported: ECO PCB rev1 Pro Micro
+
+Make example for this keyboard (after setting up your build environment):
+
+    make eco-rev1-that_canadian
+
+See [build environment setup](https://docs.qmk.fm/build_environment_setup.html) then the [make instructions](https://docs.qmk.fm/make_instructions.html) for more information.
--- a/keyboards/eco/rev1/Makefile
+++ b/keyboards/eco/rev1/Makefile
@@ -0,0 +1,3 @@
+ifndef MAKEFILE_INCLUDED
+	include ../../Makefile
+endif
--- a/keyboards/orthodox/keymaps/i2c/config.h
+++ b/keyboards/orthodox/keymaps/i2c/config.h
@@ -15,20 +15,16 @@ You should have received a copy of the GNU General Public License
 along with this program.  If not, see <http://www.gnu.org/licenses/>.
 */

+#ifndef REV1_CONFIG_H
+#define REV1_CONFIG_H

-#define USE_I2C
+#include "../config.h"

-//#define MASTER_LEFT
-//#define _MASTER_RIGHT
-#define EE_HANDS
+#define DEVICE_VER      0x0001

+/* ECO V1 pin-out */
+#define MATRIX_ROW_PINS { B1, B6, B2, B3 }
+#define MATRIX_COL_PINS { F4, F5, F6, F7, B5, B4, E6, D7, C6, D4, D0, D1, D2, D3 }
+#define UNUSED_PINS

-#ifdef SUBPROJECT_rev1
-    #include "../../rev1/config.h"
-#endif
-#ifdef SUBPROJECT_rev2
-    #include "../../rev2/config.h"
-#endif
-#ifdef SUBPROJECT_rev2fliphalf
-	#include "../../rev2fliphalf/config.h"
 #endif
--- a/keyboards/eco/rev1/rev1.c
+++ b/keyboards/eco/rev1/rev1.c
@@ -0,0 +1 @@
+#include "eco.h"
--- a/keyboards/eco/rev1/rev1.h
+++ b/keyboards/eco/rev1/rev1.h
@@ -0,0 +1,24 @@
+#ifndef REV1_H
+#define REV1_H
+
+#include "../eco.h"
+
+//void promicro_bootloader_jmp(bool program);
+#include "quantum.h"
+
+//void promicro_bootloader_jmp(bool program);
+
+#define KEYMAP( \
+	k01, k02, k03, k04, k05, k06, k07, k08, k09, k010, k011, k012, k013, k014, \
+	k11, k12, k13, k14, k15, k16, k17, k18, k19, k110, k111, k112, k113, k114, \
+	k21, k22, k23, k24, k25, k26, k27, k28, k29, k210, k211, k212, k213, k214, \
+	k31, k32, k33, k34, k35, k36, k37, k38, k39, k310, k311, k312, k313, k314  \
+	) \
+	{ \
+		{ k01, k02, k03, k04, k05, k06, k07, k08, k09, k010, k011, k012, k013, k014 }, \
+		{ k11, k12, k13, k14, k15, k16, k17, k18, k19, k110, k111, k112, k113, k114 }, \
+		{ k21, k22, k23, k24, k25, k26, k27, k28, k29, k210, k211, k212, k213, k214 }, \
+		{ k31, k32, k33, k34, k35, k36, k37, k38, k39, k310, k311, k312, k313, k314 }  \
+	}
+
+#endif
--- a/keyboards/eco/rev1/rules.mk
+++ b/keyboards/eco/rev1/rules.mk
@@ -0,0 +1,5 @@
+BACKLIGHT_ENABLE = no
+
+ifndef QUANTUM_DIR
+	include ../../../Makefile
+endif
--- a/keyboards/eco/rules.mk
+++ b/keyboards/eco/rules.mk
@@ -0,0 +1,68 @@
+# MCU name
+#MCU = at90usb1287
+MCU = atmega32u4
+
+# Processor frequency.
+#     This will define a symbol, F_CPU, in all source code files equal to the
+#     processor frequency in Hz. You can then use this symbol in your source code to
+#     calculate timings. Do NOT tack on a 'UL' at the end, this will be done
+#     automatically to create a 32-bit value in your source code.
+#
+#     This will be an integer division of F_USB below, as it is sourced by
+#     F_USB after it has run through any CPU prescalers. Note that this value
+#     does not *change* the processor frequency - it should merely be updated to
+#     reflect the processor speed set externally so that the code can use accurate
+#     software delays.
+F_CPU = 16000000
+
+#
+# LUFA specific
+#
+# Target architecture (see library "Board Types" documentation).
+ARCH = AVR8
+
+# Input clock frequency.
+#     This will define a symbol, F_USB, in all source code files equal to the
+#     input clock frequency (before any prescaling is performed) in Hz. This value may
+#     differ from F_CPU if prescaling is used on the latter, and is required as the
+#     raw input clock is fed directly to the PLL sections of the AVR for high speed
+#     clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
+#     at the end, this will be done automatically to create a 32-bit value in your
+#     source code.
+#
+#     If no clock division is performed on the input clock inside the AVR (via the
+#     CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
+F_USB = $(F_CPU)
+
+# Interrupt driven control endpoint task(+60)
+OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
+
+
+# Boot Section Size in *bytes*
+#   Teensy halfKay   512
+#   Teensy++ halfKay 1024
+#   Atmel DFU loader 4096
+#   LUFA bootloader  4096
+#   USBaspLoader     2048
+OPT_DEFS += -DBOOTLOADER_SIZE=4096
+
+# Build Options
+#   change to "no" to disable the options, or define them in the Makefile in 
+#   the appropriate keymap folder that will get included automatically
+#
+BOOTMAGIC_ENABLE = no       # Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE = no       # Mouse keys(+4700)
+EXTRAKEY_ENABLE = yes       # Audio control and System control(+450)
+CONSOLE_ENABLE = no         # Console for debug(+400)
+COMMAND_ENABLE = yes        # Commands for debug and configuration
+NKRO_ENABLE = no            # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+BACKLIGHT_ENABLE = yes      # Enable keyboard backlight functionality
+MIDI_ENABLE = yes            # MIDI controls
+AUDIO_ENABLE = yes           # Audio output on port C6
+UNICODE_ENABLE = no         # Unicode
+BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
+RGBLIGHT_ENABLE = no        # Enable WS2812 RGB underlight.
+API_SYSEX_ENABLE = no
+
+# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
+SLEEP_LED_ENABLE = no    # Breathing sleep LED during USB suspend
--- a/keyboards/ergodox/ez/Makefile
+++ b/keyboards/ergodox/ez/Makefile
@@ -1,7 +1,7 @@
 SLEEP_LED_ENABLE = no  # Breathing sleep LED during USB suspend
 COMMAND_ENABLE   = no  # Commands for debug and configuration
-RGBLIGHT_ENABLE ?= yes
-MIDI_ENABLE ?= no
+RGBLIGHT_ENABLE = yes
+MIDI_ENABLE = no

 ifndef MAKEFILE_INCLUDED
 	include ../../../Makefile
--- a/keyboards/ergodox/ez/rules.mk
+++ b/keyboards/ergodox/ez/rules.mk
@@ -72,5 +72,5 @@ OPT_DEFS += -DBOOTLOADER_SIZE=512
 #

 SLEEP_LED_ENABLE = no
-API_SYSEX_ENABLE ?= no
-RGBLIGHT_ENABLE ?= yes
+API_SYSEX_ENABLE = no
+RGBLIGHT_ENABLE = yes
--- a/keyboards/ergodox/infinity/rules.mk
+++ b/keyboards/ergodox/infinity/rules.mk
@@ -58,12 +58,12 @@ OPT_DEFS += -DCORTEX_VTOR_INIT=0x00002000
 # Build Options
 #   comment out to disable the options.
 #
-CUSTOM_MATRIX ?= yes # Custom matrix file
+CUSTOM_MATRIX = yes # Custom matrix file
 SERIAL_LINK_ENABLE = yes
-VISUALIZER_ENABLE ?= yes
-LCD_ENABLE ?= yes
-BACKLIGHT_ENABLE ?= yes
-LCD_BACKLIGHT_ENABLE ?= yes
+VISUALIZER_ENABLE = yes
+LCD_ENABLE = yes
+BACKLIGHT_ENABLE = yes
+LCD_BACKLIGHT_ENABLE = yes
 MIDI_ENABLE = no
 RGBLIGHT_ENABLE = no

--- a/keyboards/ergodox/keymaps/algernon/Makefile
+++ b/keyboards/ergodox/keymaps/algernon/Makefile
@@ -1,15 +1,15 @@
 BOOTMAGIC_ENABLE=no
 COMMAND_ENABLE=no
 SLEEP_LED_ENABLE=no
-FORCE_NKRO ?= yes
+FORCE_NKRO = yes
 DEBUG_ENABLE = no
 CONSOLE_ENABLE = no
 TAP_DANCE_ENABLE = yes
-KEYLOGGER_ENABLE ?= yes
+KEYLOGGER_ENABLE = yes
 UCIS_ENABLE = yes
 MOUSEKEY_ENABLE = no

-AUTOLOG_ENABLE ?= no
+AUTOLOG_ENABLE = no

 ifeq (${FORCE_NKRO},yes)
 OPT_DEFS += -DFORCE_NKRO
--- a/keyboards/ergodox/keymaps/dvorak_programmer/Makefile
+++ b/keyboards/ergodox/keymaps/dvorak_programmer/Makefile
@@ -1,7 +1,7 @@
 BOOTMAGIC_ENABLE=no
 COMMAND_ENABLE=no
 SLEEP_LED_ENABLE=no
-FORCE_NKRO ?= yes
+FORCE_NKRO = yes
 DEBUG_ENABLE = no
 CONSOLE_ENABLE = no
 TAP_DANCE_ENABLE = no
--- a/keyboards/ergodox/keymaps/erez_experimental/Makefile
+++ b/keyboards/ergodox/keymaps/erez_experimental/Makefile
@@ -3,8 +3,6 @@

 SLEEP_LED_ENABLE = no  # Breathing sleep LED during USB suspend
 COMMAND_ENABLE   = no  # Commands for debug and configuration
-RGBLIGHT_ENABLE ?= yes
-MIDI_ENABLE ?= yes

 ifndef QUANTUM_DIR
 	include ../../../../Makefile
--- a/keyboards/ergodox/keymaps/jack/Makefile
+++ b/keyboards/ergodox/keymaps/jack/Makefile
@@ -1,6 +1,3 @@
-RGBLIGHT_ENABLE ?= yes
-MIDI_ENABLE ?= yes
-
 ifndef QUANTUM_DIR
 	include ../../../../Makefile
 endif
--- a/keyboards/ergodox/keymaps/jafo/jafo-layout.pdf
+++ b/keyboards/ergodox/keymaps/jafo/jafo-layout.pdf
--- a/keyboards/ergodox/keymaps/swedish-lindhe/keymap.c
+++ b/keyboards/ergodox/keymaps/swedish-lindhe/keymap.c
@@ -0,0 +1,199 @@
+/* Copyright 2017 Andreas Lindhé
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include "ergodox.h"
+#include "debug.h"
+#include "action_layer.h"
+#include "keymap_swedish.h"
+
+#define BASE 0 // default layer
+#define SYMB 1 // symbols
+#define MDIA 2 // media keys
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+/* Keymap 0: Basic layer
+ *
+ * ,--------------------------------------------------.           ,--------------------------------------------------.
+ * | Print  |   !  |  "   |  #   |  #   |  %   |      |           |Middle|   &  |  /   |  (   |  )   |  =   |  ?     |
+ * | Screen |   1  |  2 @ |  3 £ |  4 $ |  5   | F11  |           |Mouse |   6  |  7 { |  8 [ |  9 ] |  0 } |  + \   |
+ * |--------+------+------+------+------+-------------|           |------+------+------+------+------+------+--------|
+ * | Tab    | Q    | W    | E    | R    | T    | ~L1  |           |  L1  | Y    | U    | I    | O    | P    | Å      |
+ * |--------+------+------+------+------+------|      |           |      |------+------+------+------+------+--------|
+ * | CapsLk | A    | S    | D    | F    | G    |------|           |------| H    | J    | K    | L    | Ö    | Ä      |
+ * |--------+------+------+------+------+------| `    |           | Del  |------+------+------+------+------+--------|
+ * | LShft  | Z    | X    | C    | V    | B    |  '   |           |      | N    | M    | ,    | .    | -    | RShift |
+ * `--------+------+------+------+------+-------------'           `-------------+------+------+------+------+--------'
+ *   | LCtl |  ^   | *    | LAlt | LGui |                                       | AltGr| Down |  Up  | Left | Right|
+ *   | (')  |  " ~ | '  ´ |      |      |                                       |      |      |      |      |      |
+ *   `----------------------------------'                                       `----------------------------------'
+ *                                        ,-------------.       ,--------------.
+ *                                        | LCtl | LAlt |       | Home |   End  |
+ *                                 ,------|------|------|       |------+-------+------.
+ *                                 |      |      |  ~   |       | PgUp |       |      |
+ *                                 | Space|Back- |------|       |------|  Tab  |Enter |
+ *                                 |      |space | Esc  |       | PgDn |       | L2   |
+ *                                 `--------------------'       `---------------------'
+ */
+
+[BASE] = KEYMAP(  // layer 0 : default
+    // left hand
+    KC_PSCR,         KC_1,     KC_2,     KC_3,    KC_4,    KC_5,   KC_F11,
+    KC_TAB,          KC_Q,     KC_W,     KC_E,    KC_R,    KC_T,   MO(SYMB),
+    KC_CAPS,         KC_A,     KC_S,     KC_D,    KC_F,    KC_G,
+    KC_LSFT,         KC_Z,     KC_X,     KC_C,    KC_V,    KC_B,   NO_ACUT,
+    CTL_T(NO_APOS),  NO_CIRC,  NO_ASTR,  KC_LALT, KC_LGUI,
+                                               KC_LCTRL,  KC_LALT,
+                                                          NO_TILD,
+                                         KC_SPC, KC_BSPC, KC_ESC,
+    // right hand
+         KC_MS_BTN3,   KC_6,   KC_7,    KC_8,    KC_9,    KC_0,     NO_PLUS,
+         TG(SYMB),  KC_Y,   KC_U,    KC_I,    KC_O,    KC_P,     NO_AA,
+                    KC_H,   KC_J,    KC_K,    KC_L,    NO_OSLH,  NO_AE,
+         KC_DELT,   KC_N,   KC_M,    KC_COMM, KC_DOT,  NO_MINS,  KC_RSFT,
+                            NO_ALGR, KC_DOWN, KC_UP,   KC_LEFT,  KC_RGHT,
+         KC_HOME,        KC_END,
+         KC_PGUP,
+         KC_PGDN, KC_TAB, LT(MDIA, KC_ENT)
+),
+
+/* Keymap 1: Symbol Layer
+ *
+ * ,--------------------------------------------------.           ,--------------------------------------------------.
+ * |        |      |      |      |      |      |      |           |      |      |      |  /   |   *  |  -   |        |
+ * |--------+------+------+------+------+-------------|           |------+------+------+------+------+------+--------|
+ * |        |  F1  |  F2  |  F3  |  F4  |      |      |           |      |      |  7   |  8   |  9   |  +   |        |
+ * |--------+------+------+------+------+------|      |           |      |------+------+------+------+------+--------|
+ * |        |  F5  |  F6  |  F7  |  F8  |      |------|           |------|      |  4   |  5   |  6   |  +   |        |
+ * |--------+------+------+------+------+------|      |           |      |------+------+------+------+------+--------|
+ * |        |  F9  |  F10 |  F11 |  F12 |      |      |           |      |      |  1   |  2   |  3   | Enter|        |
+ * `--------+------+------+------+------+-------------'           `-------------+------+------+------+------+--------'
+ *   |      |      |      |      |      |                                       |  0   | ,    | .    | Enter|      |
+ *   `----------------------------------'                                       `----------------------------------'
+ *                                        ,-------------.       ,-------------.
+ *                                        |      |      |       |      |      |
+ *                                 ,------|------|------|       |------+------+------.
+ *                                 |      |      |      |       |      |      |      |
+ *                                 |      |      |------|       |------|      |      |
+ *                                 |      |      |      |       |      |      |      |
+ *                                 `--------------------'       `--------------------'
+ */
+// SYMBOLS
+[SYMB] = KEYMAP(
+       // left hand
+       KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+       KC_TRNS, KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_TRNS, KC_TRNS,
+       KC_TRNS, KC_F5,   KC_F6,   KC_F7,   KC_F8,   KC_TRNS,
+       KC_TRNS, KC_F9,   KC_F10,  KC_F11,  KC_F12,  KC_TRNS, KC_TRNS,
+       KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+                                       KC_TRNS,KC_TRNS,
+                                               KC_TRNS,
+                               KC_TRNS,KC_TRNS,KC_TRNS,
+       // right hand
+       KC_TRNS, KC_TRNS, KC_TRNS, KC_PSLS, KC_PAST, KC_PMNS, KC_TRNS,
+       KC_TRNS, KC_TRNS, KC_7,    KC_8,    KC_9,    KC_PPLS, KC_TRNS,
+                KC_TRNS, KC_4,    KC_5,    KC_6,    KC_PPLS, KC_TRNS,
+       RESET,   KC_TRNS, KC_1,    KC_2,    KC_3,    KC_PENT, KC_TRNS,
+                         KC_0,    KC_COMM, KC_DOT,  KC_PENT, KC_TRNS,
+       KC_TRNS, KC_TRNS,
+       KC_TRNS,
+       KC_TRNS, KC_TRNS, KC_TRNS
+),
+/* Keymap 2: Media and mouse keys
+ *
+ * ,--------------------------------------------------.           ,--------------------------------------------------.
+ * |        |      |      |      |      |      |      |           |      |      |      |      |      |      |        |
+ * |--------+------+------+------+------+-------------|           |------+------+------+------+------+------+--------|
+ * |        |      |      | MsUp |      |      |      |           |      |      |      |      |      |      |        |
+ * |--------+------+------+------+------+------|      |           |      |------+------+------+------+------+--------|
+ * |        |      |MsLeft|MsDown|MsRght|      |------|           |------|      | Play | Pause| Prev | Next |        |
+ * |--------+------+------+------+------+------|      |           |      |------+------+------+------+------+--------|
+ * |        |      |      | Lclk | Rclk |      |      |           |      |      |VolDn |VolUp | Mute |      |        |
+ * `--------+------+------+------+------+-------------'           `-------------+------+------+------+------+--------'
+ *   |      |      |      |      |      |                                       |      |      |      |      |      |
+ *   `----------------------------------'                                       `----------------------------------'
+ *                                        ,-------------.       ,-------------.
+ *                                        |      |      |       |      |      |
+ *                                 ,------|------|------|       |------+------+------.
+ *                                 |      |      |      |       |      |      |      |
+ *                                 |LeClk |RiClk |------|       |------|      |      |
+ *                                 |      |      |      |       |      |      |      |
+ *                                 `--------------------'       `--------------------'
+ */
+// MEDIA AND MOUSE
+[MDIA] = KEYMAP(
+       KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+       KC_TRNS, KC_TRNS, KC_TRNS, KC_MS_U, KC_TRNS, KC_TRNS, KC_TRNS,
+       KC_TRNS, KC_TRNS, KC_MS_L, KC_MS_D, KC_MS_R, KC_TRNS,
+       KC_TRNS, KC_TRNS, KC_TRNS, KC_BTN1, KC_BTN2, KC_TRNS, KC_TRNS,
+       KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+                                           KC_TRNS, KC_TRNS,
+                                                    KC_TRNS,
+                                  KC_BTN1, KC_BTN2, KC_TRNS,
+    // right hand
+       KC_TRNS,  KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+       KC_TRNS,  KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+                 KC_TRNS, KC_MPLY, KC_MPLY, KC_MPRV, KC_MNXT, KC_TRNS,
+       KC_TRNS,  KC_TRNS, KC_VOLD, KC_VOLU, KC_MUTE, KC_TRNS, KC_TRNS,
+                          KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+       KC_TRNS, KC_TRNS,
+       KC_TRNS,
+       KC_TRNS, KC_TRNS, KC_TRNS
+),
+};
+
+const uint16_t PROGMEM fn_actions[] = {
+    [1] = ACTION_LAYER_TAP_TOGGLE(SYMB)                // FN1 - Momentary Layer 1 (Symbols)
+};
+
+// Runs just one time when the keyboard initializes.
+void matrix_init_user(void) {
+
+};
+
+// Runs constantly in the background, in a loop.
+void matrix_scan_user(void) {
+
+    uint8_t layer = biton32(layer_state);
+
+    ergodox_board_led_off();
+    ergodox_right_led_1_off();
+    ergodox_right_led_2_off();
+    ergodox_right_led_3_off();
+    switch (layer) {
+      // TODO: Make this relevant to the ErgoDox EZ.
+        case 1:
+            ergodox_right_led_3_on();
+            break;
+        case 2:
+            ergodox_right_led_2_on();
+            break;
+        case 3:
+            ergodox_right_led_2_on();
+            ergodox_right_led_3_on();
+            break;
+        default:
+            // none
+            break;
+    }
+
+    if (host_keyboard_leds() & (1<<USB_LED_CAPS_LOCK)) {
+        // if capslk is on, set led 1 on
+        ergodox_right_led_1_on();
+    } else {
+        ergodox_right_led_1_off();
+    }
+
+};
--- a/keyboards/ergodox/keymaps/swedish-lindhe/readme.md
+++ b/keyboards/ergodox/keymaps/swedish-lindhe/readme.md
@@ -0,0 +1,50 @@
+# swedish-lindhe ErgoDox (EZ) keymap
+
+This is a setup that is very useful for me. It may or may not be for
+you. I will use it in conjunction with the A5 overlayed sv_SE layout.
+
+The layout is subject to change (in particular I'm thinking about adding
+a macro recording feature), but it have not changed much the past year
+or two so you can expect it to be stable enough to learn it.
+
+A5: http://aoeu.info/s/dvorak/svorak
+My xkb map: https://github.com/lindhe/dotfiles/blob/master/usr/share/X11/xkb/symbols/se-A5
+
+The most major points:
+======================
+
+I think the layout image can be found on
+[www.keyboard-layout-editor.com](http://www.keyboard-layout-editor.com/#/gists/d84bc5915707cb30a4f9f754e06ecea3)
+
+L0:
+---
+
+* Easily accessible F11 key for fullscreening
+* Print screen
+* Middle mouse button for X-paste
+* Improved reachability of meta buttons (LCtrl, LALt, AltGr, LGui etc.)
+* Cluster Page Up/Down + Home/End by the right thumb
+* Vim-like arrow layout in right bottom row
+
+* Set media layer toggle to right thumb (Enter)
+* Set apostrophe on LCtl (putting it next to some other small
+  characters)
+
+L1:
+---
+
+* Full function key layout
+* Teensy button
+
+L2:
+---
+
+* Improved media buttons layout (close by the jkl; Vim binding)
+* Improved layout of emulated mouse buttons
+
+LED behaviour to binary+CAPS
+============================
+
+The ErgoDox LEDs on this layout is using the two rightmost LEDs as the
+two LSB in a two digit binary number, representing layer 0, 1, 2 and 3.
+The leftmost byte/LED indicates CAPS status.
--- a/keyboards/ergodox/keymaps/swedish/keymap.c
+++ b/keyboards/ergodox/keymaps/swedish/keymap.c
@@ -0,0 +1,247 @@
+/* Copyright 2017 Andreas Lindhé
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include "ergodox.h"
+#include "debug.h"
+#include "action_layer.h"
+#include "version.h"
+#include "keymap_swedish.h"
+
+#define BASE 0 // default layer
+#define SYMB 1 // symbols
+#define MDIA 2 // media keys
+
+enum custom_keycodes {
+  PLACEHOLDER = SAFE_RANGE, // can always be here
+  EPRM,
+  VRSN,
+  RGB_SLD
+};
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+/* Keymap 0: Basic layer
+ *
+ * ,--------------------------------------------------.           ,--------------------------------------------------.
+ * |   ½    |   !  |  "   |  #   |  #   |  %   | LEFT |           | RIGHT|   &  |  /   |  (   |  )   |  =   |  ?     |
+ * |   §    |   1  |  2 @ |  3 £ |  4 $ |  5   |      |           |      |   6  |  7 { |  8 [ |  9 ] |  0 } |  + \   |
+ * |--------+------+------+------+------+-------------|           |------+------+------+------+------+------+--------|
+ * | Delete |   Q  |   W  |   E  |   R  |   T  |  L1  |           |  L1  |   Y  |   U  |   I  |   O  |   P  |   Å    |
+ * |        |      |      |      |      |      |      |           |      |      |      |      |      |      |        |
+ * |--------+------+------+------+------+------|      |           |      |------+------+------+------+------+--------|
+ * | Caps   |   A  |   S  |   D  |   F  |   G  |------|           |------|   H  |   J  |   K  |   L  |Ö / L2|Ä / Cmd |
+ * | Lock   |      |      |      |      |      | Hyper|           | Meh  |      |      |      |      |      |        |
+ * |--------+------+------+------+------+------|      |           |      |------+------+------+------+------+--------|
+ * | Left   |Z/Ctrl|   X  |   C  |   V  |   B  |      |           |      |   N  |   M  |   ;  |   :  |_/Ctrl| RShift |
+ * | Shift  |      |      |      |      |      |      |           |      |      |      |   ,  |   .  |-     |        |
+ * `--------+------+------+------+------+-------------'           `-------------+------+------+------+------+--------'
+ *   | '/L1 |  `   |AltShf| Left | Right|                                       |  Up  | Down |  ^   |  *   | ~L1  |
+ *   |      |  '   |      |      |      |                                       |      |      |      |      |      |
+ *   `----------------------------------'                                       `----------------------------------'
+ *                                        ,-------------.       ,---------------.
+ *                                        | App  | LGui |       | AltGr|Ctrl/Esc|
+ *                                 ,------|------|------|       |------+--------+------.
+ *                                 |      |      | Home |       | PgUp |        |      |
+ *                                 | Space|Back- |------|       |------|  Tab   |Enter |
+ *                                 |      |space | End  |       | PgDn |        |      |
+ *                                 `--------------------'       `----------------------'
+ */
+// If it accepts an argument (i.e, is a function), it doesn't need KC_.
+// Otherwise, it needs KC_*
+[BASE] = KEYMAP(  // layer 0 : default
+    // left hand
+    NO_HALF,          KC_1,           KC_2,          KC_3,    KC_4,    KC_5,   KC_LEFT,
+    KC_DELT,          KC_Q,           KC_W,          KC_E,    KC_R,    KC_T,   TG(SYMB),
+    KC_BSPC,          KC_A,           KC_S,          KC_D,    KC_F,    KC_G,
+    KC_LSFT,          CTL_T(KC_Z),    KC_X,          KC_C,    KC_V,    KC_B,   ALL_T(KC_NO),
+    LT(SYMB,NO_APOS), NO_ACUT,        LALT(KC_LSFT), KC_LEFT, KC_RGHT,
+                                          ALT_T(KC_APP),  KC_LGUI,
+                                                          KC_HOME,
+                                           KC_SPC,KC_BSPC,KC_END,
+    // right hand
+         KC_RGHT,      KC_6,   KC_7,   KC_8,    KC_9,    KC_0,              NO_PLUS,
+         TG(SYMB),     KC_Y,   KC_U,   KC_I,    KC_O,    KC_P,              NO_AA,
+                       KC_H,   KC_J,   KC_K,    KC_L,    LT(MDIA, NO_OSLH), GUI_T(NO_AE),
+         MEH_T(KC_NO), KC_N,   KC_M,   KC_COMM, KC_DOT,  CTL_T(NO_MINS),    KC_RSFT,
+                               KC_UP,  KC_DOWN, NO_CIRC, NO_ASTR,           KC_FN1,
+         NO_ALGR,        CTL_T(KC_ESC),
+         KC_PGUP,
+         KC_PGDN,KC_TAB, KC_ENT
+),
+
+/* Keymap 1: Symbol Layer
+ *
+ * ,--------------------------------------------------.           ,--------------------------------------------------.
+ * |Version |  F1  |  F2  |  F3  |  F4  |  F5  |      |           |      |  F6  |  F7  |  F8  |  F9  |  F10 |   F11  |
+ * |--------+------+------+------+------+-------------|           |------+------+------+------+------+------+--------|
+ * |        |   !  |   @  |   {  |   }  |   |  |      |           |      |   Up |   7  |   8  |   9  |   *  |   F12  |
+ * |--------+------+------+------+------+------|      |           |      |------+------+------+------+------+--------|
+ * |        |   #  |   $  |   (  |   )  |   `  |------|           |------| Down |   4  |   5  |   6  |   +  |        |
+ * |--------+------+------+------+------+------|      |           |      |------+------+------+------+------+--------|
+ * |        |   %  |   ^  |   [  |   ]  |   ~  |      |           |      |   &  |   1  |   2  |   3  |   \  |        |
+ * `--------+------+------+------+------+-------------'           `-------------+------+------+------+------+--------'
+ *   |      |      |      |      |      |                                       |      |    . |   0  |   =  |      |
+ *   `----------------------------------'                                       `----------------------------------'
+ *                                        ,-------------.       ,-------------.
+ *                                        |Animat|      |       |Toggle|Solid |
+ *                                 ,------|------|------|       |------+------+------.
+ *                                 |Bright|Bright|      |       |      |Hue-  |Hue+  |
+ *                                 |ness- |ness+ |------|       |------|      |      |
+ *                                 |      |      |      |       |      |      |      |
+ *                                 `--------------------'       `--------------------'
+ */
+// SYMBOLS
+[SYMB] = KEYMAP(
+       // left hand
+       VRSN,   KC_F1,  KC_F2,  KC_F3,  KC_F4,  KC_F5,  KC_TRNS,
+       KC_TRNS,KC_EXLM,NO_AT,  NO_LCBR,NO_RCBR,NO_PIPE,KC_TRNS,
+       KC_TRNS,KC_HASH,NO_DLR, NO_LPRN,NO_RPRN,NO_GRV,
+       KC_TRNS,KC_PERC,NO_CIRC,NO_LBRC,NO_RBRC,NO_TILD,KC_TRNS,
+          EPRM,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,
+                                       RGB_MOD,KC_TRNS,
+                                               KC_TRNS,
+                               RGB_VAD,RGB_VAI,KC_TRNS,
+       // right hand
+       KC_TRNS, KC_F6,   KC_F7,  KC_F8,   KC_F9,   KC_F10,  KC_F11,
+       KC_TRNS, KC_UP,   KC_7,   KC_8,    KC_9,    NO_ASTR, KC_F12,
+                KC_DOWN, KC_4,   KC_5,    KC_6,    NO_PLUS, KC_TRNS,
+       KC_TRNS, NO_AMPR, KC_1,   KC_2,    KC_3,    NO_MINS, KC_TRNS,
+                         KC_TRNS,KC_DOT,  KC_0,    NO_EQL,  KC_TRNS,
+       RGB_TOG, RGB_SLD,
+       KC_TRNS,
+       KC_TRNS, RGB_HUD, RGB_HUI
+),
+
+/* Keymap 2: Media and mouse keys
+ *
+ * ,--------------------------------------------------.           ,--------------------------------------------------.
+ * |        |      |      |      |      |      |      |           |      |      |      |      |      |      |        |
+ * |--------+------+------+------+------+-------------|           |------+------+------+------+------+------+--------|
+ * |        |      |      | MsUp |      |      |      |           |      |      |      |      |      |      |        |
+ * |--------+------+------+------+------+------|      |           |      |------+------+------+------+------+--------|
+ * |        |      |MsLeft|MsDown|MsRght|      |------|           |------|      |      |      |      |      |  Play  |
+ * |--------+------+------+------+------+------|      |           |      |------+------+------+------+------+--------|
+ * |        |      |      |      |      |      |      |           |      |      |      | Prev | Next |      |        |
+ * `--------+------+------+------+------+-------------'           `-------------+------+------+------+------+--------'
+ *   |      |      |      | Lclk | Rclk |                                       |VolUp |VolDn | Mute |      |      |
+ *   `----------------------------------'                                       `----------------------------------'
+ *                                        ,-------------.       ,-------------.
+ *                                        |      |      |       |      |      |
+ *                                 ,------|------|------|       |------+------+------.
+ *                                 |      |      |      |       |      |      |Brwser|
+ *                                 |      |      |------|       |------|      |Back  |
+ *                                 |      |      |      |       |      |      |      |
+ *                                 `--------------------'       `--------------------'
+ */
+// MEDIA AND MOUSE
+[MDIA] = KEYMAP(
+       KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+       KC_TRNS, KC_TRNS, KC_TRNS, KC_MS_U, KC_TRNS, KC_TRNS, KC_TRNS,
+       KC_TRNS, KC_TRNS, KC_MS_L, KC_MS_D, KC_MS_R, KC_TRNS,
+       KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+       KC_TRNS, KC_TRNS, KC_TRNS, KC_BTN1, KC_BTN2,
+                                           KC_TRNS, KC_TRNS,
+                                                    KC_TRNS,
+                                  KC_TRNS, KC_TRNS, KC_TRNS,
+    // right hand
+       KC_TRNS,  KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+       KC_TRNS,  KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+                 KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_MPLY,
+       KC_TRNS,  KC_TRNS, KC_TRNS, KC_MPRV, KC_MNXT, KC_TRNS, KC_TRNS,
+                          KC_VOLU, KC_VOLD, KC_MUTE, KC_TRNS, KC_TRNS,
+       KC_TRNS, KC_TRNS,
+       KC_TRNS,
+       KC_TRNS, KC_TRNS, KC_WBAK
+),
+};
+
+const uint16_t PROGMEM fn_actions[] = {
+    [1] = ACTION_LAYER_TAP_TOGGLE(SYMB)                // FN1 - Momentary Layer 1 (Symbols)
+};
+
+const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt)
+{
+  // MACRODOWN only works in this function
+      switch(id) {
+        case 0:
+        if (record->event.pressed) {
+          SEND_STRING (QMK_KEYBOARD "/" QMK_KEYMAP " @ " QMK_VERSION);
+        }
+        break;
+        case 1:
+        if (record->event.pressed) { // For resetting EEPROM
+          eeconfig_init();
+        }
+        break;
+      }
+    return MACRO_NONE;
+};
+
+bool process_record_user(uint16_t keycode, keyrecord_t *record) {
+  switch (keycode) {
+    // dynamically generate these.
+    case EPRM:
+      if (record->event.pressed) {
+        eeconfig_init();
+      }
+      return false;
+      break;
+    case VRSN:
+      if (record->event.pressed) {
+        SEND_STRING (QMK_KEYBOARD "/" QMK_KEYMAP " @ " QMK_VERSION);
+      }
+      return false;
+      break;
+    case RGB_SLD:
+      if (record->event.pressed) {
+        #ifdef RGBLIGHT_ENABLE
+          rgblight_mode(1);
+        #endif
+      }
+      return false;
+      break;
+  }
+  return true;
+}
+
+// Runs just one time when the keyboard initializes.
+void matrix_init_user(void) {
+
+};
+
+
+// Runs constantly in the background, in a loop.
+void matrix_scan_user(void) {
+
+    uint8_t layer = biton32(layer_state);
+
+    ergodox_board_led_off();
+    ergodox_right_led_1_off();
+    ergodox_right_led_2_off();
+    ergodox_right_led_3_off();
+    switch (layer) {
+      // TODO: Make this relevant to the ErgoDox EZ.
+        case 1:
+            ergodox_right_led_1_on();
+            break;
+        case 2:
+            ergodox_right_led_2_on();
+            break;
+        default:
+            // none
+            break;
+    }
+
+};
--- a/keyboards/ergodox/keymaps/swedish/readme.md
+++ b/keyboards/ergodox/keymaps/swedish/readme.md
@@ -0,0 +1,36 @@
+# Swedish (sv_SE) Qwerty layout for ErgoDox EZ, based on the Default configuration
+
+*NOTE:* it might still be desirable to set the software layout to sv_SE in your
+OS.
+
+Remind me and I'll provide a picture of the layout.
+
+I have tried making this as close of a match I could between the [default
+ErgoDox EZ configuration](https://ergodox-ez.com/pages/our-firmware) and a
+standard Swedish Qwerty layout.
+
+## Notable differences from default:
+
+* There are three special character buttons (acute accent, circumflex/tilde and
+  apostrophe/asterisk) that don't have any buttons to map to naturally. I've put
+  these at other places:
+
+    * Acute accent (´) can be found in the lower left corner, conveniently
+      placed to reach for making an é.
+
+    * Apostrophe (') was put in the lower left corner, close to acute accent.
+
+    * Circumflex (^) and asterisk (*) was placed in the lower right corner.
+
+    * Tilde (~) and diaeresis (¨) I couldn't find a good place for, so I left
+      those out. I could only get the buttons to produce a single one of the
+      characters. How can I get it to work properly?
+
+* The Alt button on right thumb was exchanged for AltGr (RAlt).
+
+* I changed the backslash in the numpad (layer 1) for a minus. Thought it was
+  more sensible.
+
+* I didn't find a good place for the "<>|" button, so that one was left out.
+  That is a problem that really needs to be resolved. Pipe can be found on layer
+  one, however.
--- a/keyboards/ergodox/rules.mk
+++ b/keyboards/ergodox/rules.mk
@@ -16,13 +16,13 @@
 # Build Options
 #   comment out to disable the options.
 #
-BOOTMAGIC_ENABLE ?= no  # Virtual DIP switch configuration(+1000)
-MOUSEKEY_ENABLE  ?= yes # Mouse keys(+4700)
-EXTRAKEY_ENABLE  ?= yes # Audio control and System control(+450)
-CONSOLE_ENABLE   ?= no  # Console for debug(+400)
-COMMAND_ENABLE   ?= yes # Commands for debug and configuration
-CUSTOM_MATRIX    ?= yes # Custom matrix file for the ErgoDox EZ
-SLEEP_LED_ENABLE ?= yes # Breathing sleep LED during USB suspend
-NKRO_ENABLE      ?= yes # USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
-UNICODE_ENABLE   ?= yes # Unicode
-ONEHAND_ENABLE   ?= yes # Allow swapping hands of keyboard
+BOOTMAGIC_ENABLE = no  # Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE  = yes # Mouse keys(+4700)
+EXTRAKEY_ENABLE  = yes # Audio control and System control(+450)
+CONSOLE_ENABLE   = no  # Console for debug(+400)
+COMMAND_ENABLE   = yes # Commands for debug and configuration
+CUSTOM_MATRIX    = yes # Custom matrix file for the ErgoDox EZ
+SLEEP_LED_ENABLE = yes # Breathing sleep LED during USB suspend
+NKRO_ENABLE      = yes # USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+UNICODE_ENABLE   = yes # Unicode
+ONEHAND_ENABLE   = yes # Allow swapping hands of keyboard
--- a/keyboards/frosty_flake/rules.mk
+++ b/keyboards/frosty_flake/rules.mk
@@ -51,21 +51,21 @@ OPT_DEFS += -DBOOTLOADER_SIZE=4096
 # Build Options
 #   change yes to no to disable
 #
-BOOTMAGIC_ENABLE ?= no      # Virtual DIP switch configuration(+1000)
-MOUSEKEY_ENABLE ?= yes       # Mouse keys(+4700)
-EXTRAKEY_ENABLE ?= yes       # Audio control and System control(+450)
-CONSOLE_ENABLE ?= no        # Console for debug(+400)
-COMMAND_ENABLE ?= no        # Commands for debug and configuration
+BOOTMAGIC_ENABLE = no      # Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE = yes       # Mouse keys(+4700)
+EXTRAKEY_ENABLE = yes       # Audio control and System control(+450)
+CONSOLE_ENABLE = no        # Console for debug(+400)
+COMMAND_ENABLE = no        # Commands for debug and configuration
 # Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
-SLEEP_LED_ENABLE ?= no       # Breathing sleep LED during USB suspend
+SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
 # if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
-NKRO_ENABLE ?= no            # USB Nkey Rollover
-BACKLIGHT_ENABLE ?= no       # Enable keyboard backlight functionality on B7 by default
-MIDI_ENABLE ?= no            # MIDI controls
-UNICODE_ENABLE ?= no         # Unicode
-BLUETOOTH_ENABLE ?= no       # Enable Bluetooth with the Adafruit EZ-Key HID
-AUDIO_ENABLE ?= no           # Audio output on port C6
-FAUXCLICKY_ENABLE ?= no      # Use buzzer to emulate clicky switches
+NKRO_ENABLE = no            # USB Nkey Rollover
+BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality on B7 by default
+MIDI_ENABLE = no            # MIDI controls
+UNICODE_ENABLE = no         # Unicode
+BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
+AUDIO_ENABLE = no           # Audio output on port C6
+FAUXCLICKY_ENABLE = no      # Use buzzer to emulate clicky switches

 CUSTOM_MATRIX = yes
 SRC += matrix.c
--- a/keyboards/gh60/keymaps/dbroqua/Makefile
+++ b/keyboards/gh60/keymaps/dbroqua/Makefile
@@ -91,20 +91,20 @@ OPT_DEFS += -DBOOTLOADER_SIZE=4096
 # Build Options
 #   comment out to disable the options.
 #
-BOOTMAGIC_ENABLE ?= yes		# Virtual DIP switch configuration(+1000)
-MOUSEKEY_ENABLE ?= yes		# Mouse keys(+4700)
-EXTRAKEY_ENABLE ?= yes		# Audio control and System control(+450)
-# CONSOLE_ENABLE ?= yes		# Console for debug(+400)
-# COMMAND_ENABLE ?= yes		# Commands for debug and configuration
-KEYBOARD_LOCK_ENABLE ?= yes	# Allow locking of keyboard via magic key
+BOOTMAGIC_ENABLE = yes		# Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE = yes		# Mouse keys(+4700)
+EXTRAKEY_ENABLE = yes		# Audio control and System control(+450)
+# CONSOLE_ENABLE = yes		# Console for debug(+400)
+# COMMAND_ENABLE = yes		# Commands for debug and configuration
+KEYBOARD_LOCK_ENABLE = yes	# Allow locking of keyboard via magic key
 # Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
-SLEEP_LED_ENABLE ?= yes	    # Breathing sleep LED during USB suspend
-NKRO_ENABLE ?= yes		    # USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
-# BACKLIGHT_ENABLE ?= yes	# Enable keyboard backlight functionality
-# MIDI_ENABLE ?= YES		# MIDI controls
-# UNICODE_ENABLE ?= YES		# Unicode
-# BLUETOOTH_ENABLE ?= yes	# Enable Bluetooth with the Adafruit EZ-Key HID
-RGBLIGHT_ENABLE ?= yes    # Enable RGB Underglow
+SLEEP_LED_ENABLE = yes	    # Breathing sleep LED during USB suspend
+NKRO_ENABLE = yes		    # USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+# BACKLIGHT_ENABLE = yes	# Enable keyboard backlight functionality
+# MIDI_ENABLE = YES		# MIDI controls
+# UNICODE_ENABLE = YES		# Unicode
+# BLUETOOTH_ENABLE = yes	# Enable Bluetooth with the Adafruit EZ-Key HID
+RGBLIGHT_ENABLE = yes    # Enable RGB Underglow

 ifndef QUANTUM_DIR
 	include ../../../../Makefile
--- a/keyboards/gh60/keymaps/dbroqua_7U/Makefile
+++ b/keyboards/gh60/keymaps/dbroqua_7U/Makefile
@@ -91,20 +91,20 @@ OPT_DEFS += -DBOOTLOADER_SIZE=4096
 # Build Options
 #   comment out to disable the options.
 #
-BOOTMAGIC_ENABLE ?= yes		# Virtual DIP switch configuration(+1000)
-MOUSEKEY_ENABLE ?= yes		# Mouse keys(+4700)
-EXTRAKEY_ENABLE ?= yes		# Audio control and System control(+450)
-# CONSOLE_ENABLE ?= yes		# Console for debug(+400)
-# COMMAND_ENABLE ?= yes		# Commands for debug and configuration
-KEYBOARD_LOCK_ENABLE ?= yes	# Allow locking of keyboard via magic key
+BOOTMAGIC_ENABLE = yes		# Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE = yes		# Mouse keys(+4700)
+EXTRAKEY_ENABLE = yes		# Audio control and System control(+450)
+# CONSOLE_ENABLE = yes		# Console for debug(+400)
+# COMMAND_ENABLE = yes		# Commands for debug and configuration
+KEYBOARD_LOCK_ENABLE = yes	# Allow locking of keyboard via magic key
 # Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
-SLEEP_LED_ENABLE ?= yes	    # Breathing sleep LED during USB suspend
-NKRO_ENABLE ?= yes		    # USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
-# BACKLIGHT_ENABLE ?= yes	# Enable keyboard backlight functionality
-# MIDI_ENABLE ?= YES		# MIDI controls
-# UNICODE_ENABLE ?= YES		# Unicode
-# BLUETOOTH_ENABLE ?= yes	# Enable Bluetooth with the Adafruit EZ-Key HID
-RGBLIGHT_ENABLE ?= no    # Enable RGB Underglow
+SLEEP_LED_ENABLE = yes	    # Breathing sleep LED during USB suspend
+NKRO_ENABLE = yes		    # USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+# BACKLIGHT_ENABLE = yes	# Enable keyboard backlight functionality
+# MIDI_ENABLE = YES		# MIDI controls
+# UNICODE_ENABLE = YES		# Unicode
+# BLUETOOTH_ENABLE = yes	# Enable Bluetooth with the Adafruit EZ-Key HID
+RGBLIGHT_ENABLE = no    # Enable RGB Underglow

 ifndef QUANTUM_DIR
 	include ../../../../Makefile
--- a/keyboards/gh60/keymaps/robotmaxtron/Makefile
+++ b/keyboards/gh60/keymaps/robotmaxtron/Makefile
@@ -91,20 +91,20 @@ OPT_DEFS += -DBOOTLOADER_SIZE=4096
 # Build Options
 #   comment out to disable the options.
 #
-BOOTMAGIC_ENABLE ?= yes		# Virtual DIP switch configuration(+1000)
-MOUSEKEY_ENABLE ?= yes		# Mouse keys(+4700)
-EXTRAKEY_ENABLE ?= yes		# Audio control and System control(+450)
-# CONSOLE_ENABLE ?= yes		# Console for debug(+400)
-# COMMAND_ENABLE ?= yes		# Commands for debug and configuration
-KEYBOARD_LOCK_ENABLE ?= yes	# Allow locking of keyboard via magic key
+BOOTMAGIC_ENABLE = yes		# Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE = yes		# Mouse keys(+4700)
+EXTRAKEY_ENABLE = yes		# Audio control and System control(+450)
+# CONSOLE_ENABLE = yes		# Console for debug(+400)
+# COMMAND_ENABLE = yes		# Commands for debug and configuration
+KEYBOARD_LOCK_ENABLE = yes	# Allow locking of keyboard via magic key
 # Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
-# SLEEP_LED_ENABLE ?= yes	# Breathing sleep LED during USB suspend
-NKRO_ENABLE ?= yes		# USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
-# BACKLIGHT_ENABLE ?= yes	# Enable keyboard backlight functionality
-# MIDI_ENABLE ?= YES		# MIDI controls
-# UNICODE_ENABLE ?= YES		# Unicode
-# BLUETOOTH_ENABLE ?= yes	# Enable Bluetooth with the Adafruit EZ-Key HID
-RGBLIGHT_ENABLE ?= yes          # Enable RGB Underglow
+# SLEEP_LED_ENABLE = yes	# Breathing sleep LED during USB suspend
+NKRO_ENABLE = yes		# USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+# BACKLIGHT_ENABLE = yes	# Enable keyboard backlight functionality
+# MIDI_ENABLE = YES		# MIDI controls
+# UNICODE_ENABLE = YES		# Unicode
+# BLUETOOTH_ENABLE = yes	# Enable Bluetooth with the Adafruit EZ-Key HID
+RGBLIGHT_ENABLE = yes          # Enable RGB Underglow

 ifndef QUANTUM_DIR
 	include ../../../../Makefile
--- a/keyboards/gh60/keymaps/unxmaal/Makefile
+++ b/keyboards/gh60/keymaps/unxmaal/Makefile
@@ -91,20 +91,20 @@ OPT_DEFS += -DBOOTLOADER_SIZE=4096
 # Build Options
 #   comment out to disable the options.
 #
-BOOTMAGIC_ENABLE ?= yes		# Virtual DIP switch configuration(+1000)
-MOUSEKEY_ENABLE ?= yes		# Mouse keys(+4700)
-EXTRAKEY_ENABLE ?= yes		# Audio control and System control(+450)
-# CONSOLE_ENABLE ?= yes		# Console for debug(+400)
-# COMMAND_ENABLE ?= yes		# Commands for debug and configuration
-KEYBOARD_LOCK_ENABLE ?= yes	# Allow locking of keyboard via magic key
+BOOTMAGIC_ENABLE = yes		# Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE = yes		# Mouse keys(+4700)
+EXTRAKEY_ENABLE = yes		# Audio control and System control(+450)
+# CONSOLE_ENABLE = yes		# Console for debug(+400)
+# COMMAND_ENABLE = yes		# Commands for debug and configuration
+KEYBOARD_LOCK_ENABLE = yes	# Allow locking of keyboard via magic key
 # Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
-# SLEEP_LED_ENABLE ?= yes	# Breathing sleep LED during USB suspend
-NKRO_ENABLE ?= yes		# USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
-# BACKLIGHT_ENABLE ?= yes	# Enable keyboard backlight functionality
-# MIDI_ENABLE ?= YES		# MIDI controls
-# UNICODE_ENABLE ?= YES		# Unicode
-# BLUETOOTH_ENABLE ?= yes	# Enable Bluetooth with the Adafruit EZ-Key HID
-RGBLIGHT_ENABLE ?= yes          # Enable RGB Underglow
+# SLEEP_LED_ENABLE = yes	# Breathing sleep LED during USB suspend
+NKRO_ENABLE = yes		# USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+# BACKLIGHT_ENABLE = yes	# Enable keyboard backlight functionality
+# MIDI_ENABLE = YES		# MIDI controls
+# UNICODE_ENABLE = YES		# Unicode
+# BLUETOOTH_ENABLE = yes	# Enable Bluetooth with the Adafruit EZ-Key HID
+RGBLIGHT_ENABLE = yes          # Enable RGB Underglow

 ifndef QUANTUM_DIR
 	include ../../../../Makefile
--- a/keyboards/gh60/rules.mk
+++ b/keyboards/gh60/rules.mk
@@ -51,16 +51,16 @@ OPT_DEFS += -DBOOTLOADER_SIZE=4096
 # Build Options
 #   comment out to disable the options.
 #
-BOOTMAGIC_ENABLE ?= yes		# Virtual DIP switch configuration(+1000)
-MOUSEKEY_ENABLE ?= yes		# Mouse keys(+4700)
-EXTRAKEY_ENABLE ?= yes		# Audio control and System control(+450)
-# CONSOLE_ENABLE ?= yes		# Console for debug(+400)
-# COMMAND_ENABLE ?= yes		# Commands for debug and configuration
-KEYBOARD_LOCK_ENABLE ?= yes	# Allow locking of keyboard via magic key
+BOOTMAGIC_ENABLE = yes		# Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE = yes		# Mouse keys(+4700)
+EXTRAKEY_ENABLE = yes		# Audio control and System control(+450)
+# CONSOLE_ENABLE = yes		# Console for debug(+400)
+# COMMAND_ENABLE = yes		# Commands for debug and configuration
+KEYBOARD_LOCK_ENABLE = yes	# Allow locking of keyboard via magic key
 # Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
-# SLEEP_LED_ENABLE ?= yes	# Breathing sleep LED during USB suspend
-NKRO_ENABLE ?= yes			# USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
-# BACKLIGHT_ENABLE ?= yes	# Enable keyboard backlight functionality
-# MIDI_ENABLE ?= YES			# MIDI controls
-# UNICODE_ENABLE ?= YES		# Unicode
-# BLUETOOTH_ENABLE ?= yes	# Enable Bluetooth with the Adafruit EZ-Key HID
+# SLEEP_LED_ENABLE = yes	# Breathing sleep LED during USB suspend
+NKRO_ENABLE = yes			# USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+# BACKLIGHT_ENABLE = yes	# Enable keyboard backlight functionality
+# MIDI_ENABLE = YES			# MIDI controls
+# UNICODE_ENABLE = YES		# Unicode
+# BLUETOOTH_ENABLE = yes	# Enable Bluetooth with the Adafruit EZ-Key HID
--- a/keyboards/gherkin/rules.mk
+++ b/keyboards/gherkin/rules.mk
@@ -44,13 +44,13 @@ OPT_DEFS += -DBOOTLOADER_SIZE=4096
 # Build Options
 #   comment out to disable the options.
 #
-BOOTMAGIC_ENABLE ?= yes	# Virtual DIP switch configuration(+1000)
-MOUSEKEY_ENABLE ?= yes	# Mouse keys(+4700)
-EXTRAKEY_ENABLE ?= yes	# Audio control and System control(+450)
-CONSOLE_ENABLE ?= no	# Console for debug(+400)
-COMMAND_ENABLE ?= no    # Commands for debug and configuration
-SLEEP_LED_ENABLE ?= no  # Breathing sleep LED during USB suspend
-NKRO_ENABLE ?= yes		# USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
-BACKLIGHT_ENABLE ?= yes  # Enable keyboard backlight functionality
-AUDIO_ENABLE ?= no
-RGBLIGHT_ENABLE ?= no
+BOOTMAGIC_ENABLE = yes	# Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE = yes	# Mouse keys(+4700)
+EXTRAKEY_ENABLE = yes	# Audio control and System control(+450)
+CONSOLE_ENABLE = no	# Console for debug(+400)
+COMMAND_ENABLE = no    # Commands for debug and configuration
+SLEEP_LED_ENABLE = no  # Breathing sleep LED during USB suspend
+NKRO_ENABLE = yes		# USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+BACKLIGHT_ENABLE = yes  # Enable keyboard backlight functionality
+AUDIO_ENABLE = no
+RGBLIGHT_ENABLE = no
--- a/keyboards/gonnerd/rules.mk
+++ b/keyboards/gonnerd/rules.mk
@@ -50,17 +50,17 @@ OPT_DEFS += -DBOOTLOADER_SIZE=4096
 # Build Options
 #   change yes to no to disable
 #
-BOOTMAGIC_ENABLE ?= no       # Virtual DIP switch configuration(+1000)
-MOUSEKEY_ENABLE ?= yes       # Mouse keys(+4700)
-EXTRAKEY_ENABLE ?= yes       # Audio control and System control(+450)
-CONSOLE_ENABLE ?= no         # Console for debug(+400)
-COMMAND_ENABLE ?= yes        # Commands for debug and configuration
+BOOTMAGIC_ENABLE = no       # Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE = yes       # Mouse keys(+4700)
+EXTRAKEY_ENABLE = yes       # Audio control and System control(+450)
+CONSOLE_ENABLE = no         # Console for debug(+400)
+COMMAND_ENABLE = yes        # Commands for debug and configuration
                             # Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
-SLEEP_LED_ENABLE ?= no       # Breathing sleep LED during USB suspend
+SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
                             # if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
-NKRO_ENABLE ?= no            # USB Nkey Rollover
-BACKLIGHT_ENABLE ?= yes      # Enable keyboard backlight functionality on B7 by default
-MIDI_ENABLE ?= no            # MIDI controls
-UNICODE_ENABLE ?= no         # Unicode
-BLUETOOTH_ENABLE ?= no       # Enable Bluetooth with the Adafruit EZ-Key HID
-AUDIO_ENABLE ?= no           # Audio output on port C6
+NKRO_ENABLE = no            # USB Nkey Rollover
+BACKLIGHT_ENABLE = yes      # Enable keyboard backlight functionality on B7 by default
+MIDI_ENABLE = no            # MIDI controls
+UNICODE_ENABLE = no         # Unicode
+BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
+AUDIO_ENABLE = no           # Audio output on port C6
--- a/keyboards/handwired/CMD60/rules.mk
+++ b/keyboards/handwired/CMD60/rules.mk
@@ -51,20 +51,20 @@ OPT_DEFS += -DBOOTLOADER_SIZE=512
 # Build Options
 #   change yes to no to disable
 #
-BOOTMAGIC_ENABLE ?= no      # Virtual DIP switch configuration(+1000)
-MOUSEKEY_ENABLE ?= yes       # Mouse keys(+4700)
-EXTRAKEY_ENABLE ?= yes       # Audio control and System control(+450)
-CONSOLE_ENABLE ?= yes        # Console for debug(+400)
-COMMAND_ENABLE ?= yes        # Commands for debug and configuration
+BOOTMAGIC_ENABLE = no      # Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE = yes       # Mouse keys(+4700)
+EXTRAKEY_ENABLE = yes       # Audio control and System control(+450)
+CONSOLE_ENABLE = yes        # Console for debug(+400)
+COMMAND_ENABLE = yes        # Commands for debug and configuration
 # Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
-SLEEP_LED_ENABLE ?= no       # Breathing sleep LED during USB suspend
+SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
 # if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
-NKRO_ENABLE ?= no            # USB Nkey Rollover
-BACKLIGHT_ENABLE ?= no       # Enable keyboard backlight functionality on B7 by default
-MIDI_ENABLE ?= no            # MIDI controls
-UNICODE_ENABLE ?= no         # Unicode
-BLUETOOTH_ENABLE ?= no       # Enable Bluetooth with the Adafruit EZ-Key HID
-AUDIO_ENABLE ?= no           # Audio output on port C6
+NKRO_ENABLE = no            # USB Nkey Rollover
+BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality on B7 by default
+MIDI_ENABLE = no            # MIDI controls
+UNICODE_ENABLE = no         # Unicode
+BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
+AUDIO_ENABLE = no           # Audio output on port C6

 ifndef QUANTUM_DIR
 	include ../../../Makefile
--- a/keyboards/handwired/MS_sculpt_mobile/rules.mk
+++ b/keyboards/handwired/MS_sculpt_mobile/rules.mk
@@ -24,23 +24,23 @@ F_USB = $(F_CPU)
 OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT

 #
-BOOTMAGIC_ENABLE ?= no      # Virtual DIP switch configuration(+1000)
-MOUSEKEY_ENABLE ?= no       # Mouse keys(+4700)
-EXTRAKEY_ENABLE ?= yes       # Audio control and System control(+450)
-CONSOLE_ENABLE ?= yes        # Console for debug(+400)
-COMMAND_ENABLE ?= yes        # Commands for debug and configuration
+BOOTMAGIC_ENABLE = no      # Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE = no       # Mouse keys(+4700)
+EXTRAKEY_ENABLE = yes       # Audio control and System control(+450)
+CONSOLE_ENABLE = yes        # Console for debug(+400)
+COMMAND_ENABLE = yes        # Commands for debug and configuration
 # Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
-SLEEP_LED_ENABLE ?= no       # Breathing sleep LED during USB suspend
+SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
 # if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
-NKRO_ENABLE ?= no            # USB Nkey Rollover
-BACKLIGHT_ENABLE ?= no       # Enable keyboard backlight functionality on B7 by default
-MIDI_ENABLE ?= no            # MIDI controls
-UNICODE_ENABLE ?= no         # Unicode
-BLUETOOTH_ENABLE ?= no       # Enable Bluetooth with the Adafruit EZ-Key HID
-AUDIO_ENABLE ?= no           # Audio output on port C6
+NKRO_ENABLE = no            # USB Nkey Rollover
+BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality on B7 by default
+MIDI_ENABLE = no            # MIDI controls
+UNICODE_ENABLE = no         # Unicode
+BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
+AUDIO_ENABLE = no           # Audio output on port C6


-USB ?= /dev/cu.usbmodem14141
+USB = /dev/cu.usbmodem14141

 

--- a/keyboards/handwired/arrow_pad/rules.mk
+++ b/keyboards/handwired/arrow_pad/rules.mk
@@ -53,18 +53,18 @@ OPT_DEFS += -DBOOTLOADER_SIZE=512
 # Build Options
 #   change yes to no to disable
 #
-BOOTMAGIC_ENABLE ?= yes      # Virtual DIP switch configuration(+1000)
-MOUSEKEY_ENABLE ?= yes       # Mouse keys(+4700)
-EXTRAKEY_ENABLE ?= yes       # Audio control and System control(+450)
-CONSOLE_ENABLE ?= yes        # Console for debug(+400)
-COMMAND_ENABLE ?= yes        # Commands for debug and configuration
-KEYBOARD_LOCK_ENABLE ?= yes  # Allow locking of keyboard via magic key
+BOOTMAGIC_ENABLE = yes      # Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE = yes       # Mouse keys(+4700)
+EXTRAKEY_ENABLE = yes       # Audio control and System control(+450)
+CONSOLE_ENABLE = yes        # Console for debug(+400)
+COMMAND_ENABLE = yes        # Commands for debug and configuration
+KEYBOARD_LOCK_ENABLE = yes  # Allow locking of keyboard via magic key
 # Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
-SLEEP_LED_ENABLE ?= no       # Breathing sleep LED during USB suspend
+SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
 # if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
-NKRO_ENABLE ?= yes           # USB Nkey Rollover
-BACKLIGHT_ENABLE ?= yes      # Enable keyboard backlight functionality
-MIDI_ENABLE ?= no            # MIDI controls
-UNICODE_ENABLE ?= no         # Unicode
-BLUETOOTH_ENABLE ?= no       # Enable Bluetooth with the Adafruit EZ-Key HID
-AUDIO_ENABLE ?= no           # Audio output on port C6
+NKRO_ENABLE = yes           # USB Nkey Rollover
+BACKLIGHT_ENABLE = yes      # Enable keyboard backlight functionality
+MIDI_ENABLE = no            # MIDI controls
+UNICODE_ENABLE = no         # Unicode
+BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
+AUDIO_ENABLE = no           # Audio output on port C6
--- a/keyboards/handwired/atreus50/rules.mk
+++ b/keyboards/handwired/atreus50/rules.mk
@@ -52,21 +52,21 @@ OPT_DEFS += -DBOOTLOADER_SIZE=4096
 #   change to "no" to disable the options, or define them in the Makefile in 
 #   the appropriate keymap folder that will get included automatically
 #
-BOOTMAGIC_ENABLE ?= no       # Virtual DIP switch configuration(+1000)
-MOUSEKEY_ENABLE ?= yes       # Mouse keys(+4700)
-EXTRAKEY_ENABLE ?= yes       # Audio control and System control(+450)
-CONSOLE_ENABLE ?= no         # Console for debug(+400)
-COMMAND_ENABLE ?= yes        # Commands for debug and configuration
-NKRO_ENABLE ?= no            # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
-BACKLIGHT_ENABLE ?= no       # Enable keyboard backlight functionality
-MIDI_ENABLE ?= no            # MIDI controls
-AUDIO_ENABLE ?= no           # Audio output on port C6
-UNICODE_ENABLE ?= no         # Unicode
-BLUETOOTH_ENABLE ?= no       # Enable Bluetooth with the Adafruit EZ-Key HID
-RGBLIGHT_ENABLE ?= no        # Enable WS2812 RGB underlight.  Do not enable this with audio at the same time.
+BOOTMAGIC_ENABLE = no       # Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE = yes       # Mouse keys(+4700)
+EXTRAKEY_ENABLE = yes       # Audio control and System control(+450)
+CONSOLE_ENABLE = no         # Console for debug(+400)
+COMMAND_ENABLE = yes        # Commands for debug and configuration
+NKRO_ENABLE = no            # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality
+MIDI_ENABLE = no            # MIDI controls
+AUDIO_ENABLE = no           # Audio output on port C6
+UNICODE_ENABLE = no         # Unicode
+BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
+RGBLIGHT_ENABLE = no        # Enable WS2812 RGB underlight.  Do not enable this with audio at the same time.

 # Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
-SLEEP_LED_ENABLE ?= no    # Breathing sleep LED during USB suspend
+SLEEP_LED_ENABLE = no    # Breathing sleep LED during USB suspend

 avrdude: build
 	ls /dev/tty* > /tmp/1; \
--- a/keyboards/handwired/fivethirteen/rules.mk
+++ b/keyboards/handwired/fivethirteen/rules.mk
@@ -51,20 +51,20 @@ OPT_DEFS += -DBOOTLOADER_SIZE=512
 # Build Options
 #   change yes to no to disable
 #
-BOOTMAGIC_ENABLE ?= no      # Virtual DIP switch configuration(+1000)
-MOUSEKEY_ENABLE ?= yes       # Mouse keys(+4700)
-EXTRAKEY_ENABLE ?= yes       # Audio control and System control(+450)
-CONSOLE_ENABLE ?= yes        # Console for debug(+400)
-COMMAND_ENABLE ?= yes        # Commands for debug and configuration
+BOOTMAGIC_ENABLE = no      # Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE = yes       # Mouse keys(+4700)
+EXTRAKEY_ENABLE = yes       # Audio control and System control(+450)
+CONSOLE_ENABLE = yes        # Console for debug(+400)
+COMMAND_ENABLE = yes        # Commands for debug and configuration
 # Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
-SLEEP_LED_ENABLE ?= no       # Breathing sleep LED during USB suspend
+SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
 # if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
-NKRO_ENABLE ?= no            # USB Nkey Rollover
-BACKLIGHT_ENABLE ?= no       # Enable keyboard backlight functionality on B7 by default
-MIDI_ENABLE ?= no            # MIDI controls
-UNICODE_ENABLE ?= no         # Unicode
-BLUETOOTH_ENABLE ?= no       # Enable Bluetooth with the Adafruit EZ-Key HID
-AUDIO_ENABLE ?= no           # Audio output on port C6
+NKRO_ENABLE = no            # USB Nkey Rollover
+BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality on B7 by default
+MIDI_ENABLE = no            # MIDI controls
+UNICODE_ENABLE = no         # Unicode
+BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
+AUDIO_ENABLE = no           # Audio output on port C6

 ifndef QUANTUM_DIR
 	include ../../../Makefile
--- a/keyboards/handwired/frenchdev/rules.mk
+++ b/keyboards/handwired/frenchdev/rules.mk
@@ -70,22 +70,22 @@ OPT_DEFS += -DBOOTLOADER_SIZE=512
 # Build Options
 #   comment out to disable the options.
 #
-BOOTMAGIC_ENABLE ?= no  # Virtual DIP switch configuration(+1000)
-MOUSEKEY_ENABLE  ?= yes # Mouse keys(+4700)
-EXTRAKEY_ENABLE  ?= yes # Audio control and System control(+450)
-CONSOLE_ENABLE   ?= yes  # Console for debug(+400)
-COMMAND_ENABLE   ?= yes # Commands for debug and configuration
-CUSTOM_MATRIX    ?= yes # Custom matrix file (taken and adapted from the ErgoDox EZ to handle custom number of columns)
-SLEEP_LED_ENABLE ?= no # Breathing sleep LED during USB suspend
-NKRO_ENABLE      ?= yes # USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
-UNICODE_ENABLE   ?= yes # Unicode
-BACKLIGHT_ENABLE ?= no       # Enable keyboard backlight functionality on B7 by default
-MIDI_ENABLE ?= no            # MIDI controls
-UNICODE_ENABLE ?= no         # Unicode
-BLUETOOTH_ENABLE ?= no       # Enable Bluetooth with the Adafruit EZ-Key HID
-AUDIO_ENABLE ?= no           # Audio output on port C6
+BOOTMAGIC_ENABLE = no  # Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE  = yes # Mouse keys(+4700)
+EXTRAKEY_ENABLE  = yes # Audio control and System control(+450)
+CONSOLE_ENABLE   = yes  # Console for debug(+400)
+COMMAND_ENABLE   = yes # Commands for debug and configuration
+CUSTOM_MATRIX    = yes # Custom matrix file (taken and adapted from the ErgoDox EZ to handle custom number of columns)
+SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
+NKRO_ENABLE      = yes # USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+UNICODE_ENABLE   = yes # Unicode
+BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality on B7 by default
+MIDI_ENABLE = no            # MIDI controls
+UNICODE_ENABLE = no         # Unicode
+BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
+AUDIO_ENABLE = no           # Audio output on port C6
 RGBLIGHT_ENABLE = no
-API_SYSEX_ENABLE ?= no
+API_SYSEX_ENABLE = no

 #ifndef QUANTUM_DIR
 #	include ../../../Makefile
--- a/keyboards/handwired/gamenum/rules.mk
+++ b/keyboards/handwired/gamenum/rules.mk
@@ -51,20 +51,20 @@ OPT_DEFS += -DBOOTLOADER_SIZE=512
 # Build Options
 #   change yes to no to disable
 #
-BOOTMAGIC_ENABLE ?= no      # Virtual DIP switch configuration(+1000)
-MOUSEKEY_ENABLE ?= yes       # Mouse keys(+4700)
-EXTRAKEY_ENABLE ?= yes       # Audio control and System control(+450)
-CONSOLE_ENABLE ?= yes        # Console for debug(+400)
-COMMAND_ENABLE ?= yes        # Commands for debug and configuration
+BOOTMAGIC_ENABLE = no      # Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE = yes       # Mouse keys(+4700)
+EXTRAKEY_ENABLE = yes       # Audio control and System control(+450)
+CONSOLE_ENABLE = yes        # Console for debug(+400)
+COMMAND_ENABLE = yes        # Commands for debug and configuration
 # Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
-SLEEP_LED_ENABLE ?= no       # Breathing sleep LED during USB suspend
+SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
 # if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
-NKRO_ENABLE ?= no            # USB Nkey Rollover
-BACKLIGHT_ENABLE ?= no       # Enable keyboard backlight functionality on B7 by default
-MIDI_ENABLE ?= no            # MIDI controls
-UNICODE_ENABLE ?= no         # Unicode
-BLUETOOTH_ENABLE ?= no       # Enable Bluetooth with the Adafruit EZ-Key HID
-AUDIO_ENABLE ?= no           # Audio output on port C6
+NKRO_ENABLE = no            # USB Nkey Rollover
+BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality on B7 by default
+MIDI_ENABLE = no            # MIDI controls
+UNICODE_ENABLE = no         # Unicode
+BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
+AUDIO_ENABLE = no           # Audio output on port C6

 ifndef QUANTUM_DIR
 	include ../../Makefile
--- a/keyboards/handwired/kbod/rules.mk
+++ b/keyboards/handwired/kbod/rules.mk
@@ -51,18 +51,18 @@ OPT_DEFS += -DBOOTLOADER_SIZE=4096
 # Build Options
 #   change yes to no to disable
 #
-BOOTMAGIC_ENABLE ?= no      # Virtual DIP switch configuration(+1000)
-MOUSEKEY_ENABLE ?= yes       # Mouse keys(+4700)
-EXTRAKEY_ENABLE ?= yes       # Audio control and System control(+450)
-CONSOLE_ENABLE ?= no        # Console for debug(+400)
-COMMAND_ENABLE ?= no        # Commands for debug and configuration
+BOOTMAGIC_ENABLE = no      # Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE = yes       # Mouse keys(+4700)
+EXTRAKEY_ENABLE = yes       # Audio control and System control(+450)
+CONSOLE_ENABLE = no        # Console for debug(+400)
+COMMAND_ENABLE = no        # Commands for debug and configuration
 # Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
-SLEEP_LED_ENABLE ?= no       # Breathing sleep LED during USB suspend
+SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
 # if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
-NKRO_ENABLE ?= no            # USB Nkey Rollover
-BACKLIGHT_ENABLE ?= no       # Enable keyboard backlight functionality on B7 by default
-MIDI_ENABLE ?= no            # MIDI controls
-UNICODE_ENABLE ?= no         # Unicode
-BLUETOOTH_ENABLE ?= no       # Enable Bluetooth with the Adafruit EZ-Key HID
-AUDIO_ENABLE ?= no           # Audio output on port C6
-FAUXCLICKY_ENABLE ?= no      # Use buzzer to emulate clicky switches
+NKRO_ENABLE = no            # USB Nkey Rollover
+BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality on B7 by default
+MIDI_ENABLE = no            # MIDI controls
+UNICODE_ENABLE = no         # Unicode
+BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
+AUDIO_ENABLE = no           # Audio output on port C6
+FAUXCLICKY_ENABLE = no      # Use buzzer to emulate clicky switches
--- a/keyboards/handwired/magicforce61/Makefile
+++ b/keyboards/handwired/magicforce61/Makefile
@@ -0,0 +1,3 @@
+ifndef MAKEFILE_INCLUDED
+	include ../../../Makefile
+endif
--- a/keyboards/handwired/magicforce61/README.md
+++ b/keyboards/handwired/magicforce61/README.md
@@ -0,0 +1,24 @@
+Magicforce "61" Handwired
+=======================
+
+Basically I cut 7 keys off the magicforce68 and handwired everything to a
+teensy++ 2.0 to make it a ~60% board.
+
+## Wiring Layout
+
+![Wiring Layout](https://imgur.com/gallery/RxYyA)
+
+## Pinout
+
+The following pins are used:
+
+  ```
+  #define MATRIX_ROW_PINS { D0, D1, D2, D3, D4 }
+  #define MATRIX_COL_PINS { B5, B4, B3, B2, B1, B0, E7, E6, F0, F1, F2, F3, F4, F5 } 
+  ```
+
+## Compiling and loading the firmware
+
+To build the firmware, run `make handwired-magicforce61`.
+
+Flash the firmware using the teensy loader or avrdude.
--- a/keyboards/handwired/magicforce61/config.h
+++ b/keyboards/handwired/magicforce61/config.h
@@ -0,0 +1,162 @@
+/*
+Copyright 2012 Jun Wako <wakojun@gmail.com>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#ifndef CONFIG_H
+#define CONFIG_H
+
+#include "config_common.h"
+
+/* USB Device descriptor parameter */
+#define VENDOR_ID       0xFEED
+#define PRODUCT_ID      0x6060
+#define DEVICE_VER      0x0001
+#define MANUFACTURER    Hexwire
+#define PRODUCT         Magicforce 61
+#define DESCRIPTION     Handwired Magicforce 61
+
+/* key matrix size */
+#define MATRIX_ROWS 5
+#define MATRIX_COLS 14
+
+/*
+ * Keyboard Matrix Assignments
+ *
+ * Change this to how you wired your keyboard
+ * COLS: AVR pins used for columns, left to right
+ * ROWS: AVR pins used for rows, top to bottom
+ * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
+ *                  ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
+ *
+*/
+#define MATRIX_ROW_PINS { D0, D1, D2, D3, D4 }
+#define MATRIX_COL_PINS { B5, B4, B3, B2, B1, B0, E7, E6, F0, F1, F2, F3, F4, F5 } 
+#define UNUSED_PINS
+
+/* COL2ROW or ROW2COL */
+#define DIODE_DIRECTION COL2ROW
+
+// #define BACKLIGHT_PIN B7
+// #define BACKLIGHT_BREATHING
+// #define BACKLIGHT_LEVELS 3
+
+
+/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
+#define DEBOUNCING_DELAY 5
+
+/* define if matrix has ghost (lacks anti-ghosting diodes) */
+//#define MATRIX_HAS_GHOST
+
+/* number of backlight levels */
+
+/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
+#define LOCKING_SUPPORT_ENABLE
+/* Locking resynchronize hack */
+#define LOCKING_RESYNC_ENABLE
+
+/*
+ * Force NKRO
+ *
+ * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
+ * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
+ * makefile for this to work.)
+ *
+ * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
+ * until the next keyboard reset.
+ *
+ * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
+ * fully operational during normal computer usage.
+ *
+ * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
+ * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
+ * bootmagic, NKRO mode will always be enabled until it is toggled again during a
+ * power-up.
+ *
+ */
+//#define FORCE_NKRO
+
+/*
+ * Magic Key Options
+ *
+ * Magic keys are hotkey commands that allow control over firmware functions of
+ * the keyboard. They are best used in combination with the HID Listen program,
+ * found here: https://www.pjrc.com/teensy/hid_listen.html
+ *
+ * The options below allow the magic key functionality to be changed. This is
+ * useful if your keyboard/keypad is missing keys and you want magic key support.
+ *
+ */
+
+/* key combination for magic key command */
+#define IS_COMMAND() ( \
+    keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
+)
+
+/* control how magic key switches layers */
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS  true
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS  true
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false
+
+/* override magic key keymap */
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM
+//#define MAGIC_KEY_HELP1          H
+//#define MAGIC_KEY_HELP2          SLASH
+//#define MAGIC_KEY_DEBUG          D
+//#define MAGIC_KEY_DEBUG_MATRIX   X
+//#define MAGIC_KEY_DEBUG_KBD      K
+//#define MAGIC_KEY_DEBUG_MOUSE    M
+//#define MAGIC_KEY_VERSION        V
+//#define MAGIC_KEY_STATUS         S
+//#define MAGIC_KEY_CONSOLE        C
+//#define MAGIC_KEY_LAYER0_ALT1    ESC
+//#define MAGIC_KEY_LAYER0_ALT2    GRAVE
+//#define MAGIC_KEY_LAYER0         0
+//#define MAGIC_KEY_LAYER1         1
+//#define MAGIC_KEY_LAYER2         2
+//#define MAGIC_KEY_LAYER3         3
+//#define MAGIC_KEY_LAYER4         4
+//#define MAGIC_KEY_LAYER5         5
+//#define MAGIC_KEY_LAYER6         6
+//#define MAGIC_KEY_LAYER7         7
+//#define MAGIC_KEY_LAYER8         8
+//#define MAGIC_KEY_LAYER9         9
+//#define MAGIC_KEY_BOOTLOADER     PAUSE
+//#define MAGIC_KEY_LOCK           CAPS
+//#define MAGIC_KEY_EEPROM         E
+//#define MAGIC_KEY_NKRO           N
+//#define MAGIC_KEY_SLEEP_LED      Z
+
+/*
+ * Feature disable options
+ *  These options are also useful to firmware size reduction.
+ */
+
+/* disable debug print */
+//#define NO_DEBUG
+
+/* disable print */
+//#define NO_PRINT
+
+/* disable action features */
+//#define NO_ACTION_LAYER
+//#define NO_ACTION_TAPPING
+//#define NO_ACTION_ONESHOT
+//#define NO_ACTION_MACRO
+//#define NO_ACTION_FUNCTION
+
+#endif
--- a/keyboards/handwired/magicforce61/keymaps/default/keymap.c
+++ b/keyboards/handwired/magicforce61/keymaps/default/keymap.c
@@ -0,0 +1,69 @@
+#include "magicforce61.h"
+
+#define _QWERTY 0
+#define _FN1 1
+#define _FN2 2
+#define KC_ KC_TRNS
+#define KC_X0 LT(_FN2, KC_GRV)
+#define KC_X1 MO(_FN1)
+#define KC_NAV_ESC LT(_FN1, KC_ESC)
+#define KC_GUI MAGIC_UNNO_GUI
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+  [_QWERTY] = KEYMAP(
+ /*,----+----+----+----+----+----+----+----+----+----+----+----+----+--------. */
+    GRV , 1  , 2  , 3  , 4  , 5  , 6  , 7  , 8  , 9  , 0  ,MINS,EQL ,  BSPC  ,
+ /*|----`----`----`----`----`----`----`----`----`----`----`----`----`--------| */
+    TAB   , Q  , W  , E  , R  , T  , Y  , U  , I  , O  , P  ,LBRC,RBRC, BSLS ,
+ /*|------`----`----`----`----`----`----`----`----`----`----`----`----`------| */
+    NAV_ESC    , A  , S  , D  , F  , G  , H  , J  , K  , L  ,SCLN,QUOT,  ENTER ,
+ /*|-------`----`----`----`----`----`----`----`----`----`----`----`----------| */
+    LSPO   , Z  , X  , C  , V  , B  , N  , M  ,COMM,DOT ,SLSH,     RSPC  ,
+ /*|---------`----`----`----`----`----`----`----`----`----`----`-------------. */
+    LCTL , RGUI ,LALT ,            SPACE             ,  X1  ,RALT ,RCTL ,    X1
+ /*`-----+-----+-----+------------------------------+------+-----+-----' ANY   */
+  ),
+
+  [_FN1] = KEYMAP(
+ /*,----+----+----+----+----+----+----+----+----+----+----+----+----+--------. */
+    GRV , F1 , F2 , F3 , F4 , F5 , F6 , F7 , F8 , F9 ,F10 ,F11 ,F12 ,   BSPC ,
+ /*|esc-`-1--`-2--`-3--`-4--`-5--`-6--`-7--`-8--`-9--`-0--`mnus`plus`--bksp--| */
+          ,    , UP ,    ,    ,    ,    ,    ,INS ,PSCR,    ,    ,    ,      ,
+ /*|tab---`-q--`-w--`-e--`-r--`-t--`-y--`-u--`-i--`-o--`-p--`-{--`-}--`--|---| */
+           ,LEFT,DOWN,RGHT,    ,    ,    , PGDN , PGUP ,    ,    ,    ,      ,
+ /*|caps---`-a--`-s--`-d--`-f--`-g--`-h--`-j--`-k--`-l--`-;--`-'--`----enter-| */
+             ,    ,    ,    ,    ,    ,VOLD,VOLU,MUTE,    ,    ,             ,
+ /*|shift----`-z--`-x--`-c--`-v--`-b--`-n--`-m--`-,--`-.--`-/--`-------shift-. */
+         ,     ,     ,                              ,      ,     ,     , MPLY
+ /*`ctrl-+-gui-+-alt-+----------space---------------+-fn---+-alt-+ctrl-' ANY   */
+  ),
+
+  [_FN2] = KEYMAP(
+ /*,----+----+----+----+----+----+----+----+----+----+----+----+----+--------. */
+    GRV , F1 , F2 , F3 , F4 , F5 , F6 , F7 , F8 , F9 ,F10 ,F11 ,F12 ,   BSPC ,
+ /*|esc-`-1--`-2--`-3--`-4--`-5--`-6--`-7--`-8--`-9--`-0--`mnus`plus`--bksp--| */
+          ,    ,    ,    ,    ,    ,    , 7  , 8  , 9  ,    ,    ,    ,      ,
+ /*|tab---`-q--`-w--`-e--`-r--`-t--`-y--`-u--`-i--`-o--`-p--`-{--`-}--`--|---| */
+           ,    ,    ,    ,    ,    ,    , 4  , 5  , 6  ,    ,    ,          ,
+ /*|caps---`-a--`-s--`-d--`-f--`-g--`-h--`-j--`-k--`-l--`-;--`-'--`----enter-| */
+             ,    ,    ,    ,    ,    , 0  , 1  , 2  , 3  ,    ,             ,
+ /*|shift----`-z--`-x--`-c--`-v--`-b--`-n--`-m--`-,--`-.--`-/--`-------shift-. */
+         ,     ,     ,                              ,      ,     ,     ,
+ /*`ctrl-+-gui-+-alt-+----------space---------------+-fn---+-alt-+ctrl-' ANY   */
+  )
+};
+
+const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt)
+{
+  // MACRODOWN only works in this function
+      switch(id) {
+        case 0:
+          if (record->event.pressed) {
+            register_code(KC_RSFT);
+          } else {
+            unregister_code(KC_RSFT);
+          }
+        break;
+      }
+    return MACRO_NONE;
+};
--- a/keyboards/handwired/magicforce61/magicforce61.c
+++ b/keyboards/handwired/magicforce61/magicforce61.c
@@ -0,0 +1,8 @@
+#include "magicforce61.h"
+
+void matrix_init_kb(void) {
+	// put your keyboard start-up code here
+	// runs once when the firmware starts up
+
+	matrix_init_user();
+}
--- a/keyboards/handwired/magicforce61/magicforce61.h
+++ b/keyboards/handwired/magicforce61/magicforce61.h
@@ -0,0 +1,20 @@
+#ifndef MAGICFORCE61_H
+#define MAGICFORCE61_H
+
+#include "quantum.h"
+
+#define KEYMAP( \
+    K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, \
+    K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, \
+    K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B,   K2D, \
+    K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A,        K3D, \
+    K40, K41, K42,           K45,                 K49,  K4A,  K4C,   K4D \
+    ) { \
+  {  KC_##K00, KC_##K01, KC_##K02, KC_##K03, KC_##K04, KC_##K05, KC_##K06, KC_##K07, KC_##K08, KC_##K09, KC_##K0A, KC_##K0B, KC_##K0C, KC_##K0D  },  \
+  {  KC_##K10, KC_##K11, KC_##K12, KC_##K13, KC_##K14, KC_##K15, KC_##K16, KC_##K17, KC_##K18, KC_##K19, KC_##K1A, KC_##K1B, KC_##K1C, KC_##K1D  },  \
+  {  KC_##K20, KC_##K21, KC_##K22, KC_##K23, KC_##K24, KC_##K25, KC_##K26, KC_##K27, KC_##K28, KC_##K29, KC_##K2A, KC_##K2B, KC_NO,    KC_##K2D  },  \
+  {  KC_##K30, KC_##K31, KC_##K32, KC_##K33, KC_##K34, KC_##K35, KC_##K36, KC_##K37, KC_##K38, KC_##K39, KC_##K3A, KC_NO,    KC_NO,    KC_##K3D  },  \
+  {  KC_##K40, KC_##K41, KC_##K42, KC_NO,    KC_NO,    KC_##K45, KC_NO,    KC_NO,    KC_NO,    KC_##K49, KC_##K4A, KC_NO,    KC_##K4C, KC_##K4D  },  \
+}
+
+#endif
--- a/keyboards/handwired/magicforce61/rules.mk
+++ b/keyboards/handwired/magicforce61/rules.mk
@@ -0,0 +1,83 @@
+
+# MCU name
+MCU = at90usb1286
+
+# Processor frequency.
+#     This will define a symbol, F_CPU, in all source code files equal to the
+#     processor frequency in Hz. You can then use this symbol in your source code to
+#     calculate timings. Do NOT tack on a 'UL' at the end, this will be done
+#     automatically to create a 32-bit value in your source code.
+#
+#     This will be an integer division of F_USB below, as it is sourced by
+#     F_USB after it has run through any CPU prescalers. Note that this value
+#     does not *change* the processor frequency - it should merely be updated to
+#     reflect the processor speed set externally so that the code can use accurate
+#     software delays.
+F_CPU = 16000000
+
+
+#
+# LUFA specific
+#
+# Target architecture (see library "Board Types" documentation).
+ARCH = AVR8
+
+# Input clock frequency.
+#     This will define a symbol, F_USB, in all source code files equal to the
+#     input clock frequency (before any prescaling is performed) in Hz. This value may
+#     differ from F_CPU if prescaling is used on the latter, and is required as the
+#     raw input clock is fed directly to the PLL sections of the AVR for high speed
+#     clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
+#     at the end, this will be done automatically to create a 32-bit value in your
+#     source code.
+#
+#     If no clock division is performed on the input clock inside the AVR (via the
+#     CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
+F_USB = $(F_CPU)
+
+# Interrupt driven control endpoint task(+60)
+OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
+
+
+# Boot Section Size in *bytes*
+#   Teensy halfKay   512
+#   Teensy++ halfKay 1024
+#   Atmel DFU loader 4096
+#   LUFA bootloader  4096
+#   USBaspLoader     2048
+OPT_DEFS += -DBOOTLOADER_SIZE=1024
+
+
+# Build Options
+#   change yes to no to disable
+#
+BOOTMAGIC_ENABLE ?= no      # Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE ?= yes       # Mouse keys(+4700)
+EXTRAKEY_ENABLE ?= yes       # Audio control and System control(+450)
+CONSOLE_ENABLE ?= yes        # Console for debug(+400)
+COMMAND_ENABLE ?= yes        # Commands for debug and configuration
+# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
+SLEEP_LED_ENABLE ?= no       # Breathing sleep LED during USB suspend
+# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+NKRO_ENABLE ?= no            # USB Nkey Rollover
+BACKLIGHT_ENABLE ?= no       # Enable keyboard backlight functionality on B7 by default
+MIDI_ENABLE ?= no            # MIDI controls
+UNICODE_ENABLE ?= no         # Unicode
+BLUETOOTH_ENABLE ?= no       # Enable Bluetooth with the Adafruit EZ-Key HID
+AUDIO_ENABLE ?= no           # Audio output on port C6
+
+ifndef QUANTUM_DIR
+	include ../../../Makefile
+endif
+
+avrdude: build
+	ls /dev/tty* > /tmp/1; \
+	echo "Reset your Pro Micro now"; \
+	while [[ -z $$USB ]]; do \
+	  sleep 1; \
+	  ls /dev/tty* > /tmp/2; \
+	  USB=`diff /tmp/1 /tmp/2 | grep -o '/dev/tty.*'`; \
+	done; \
+	avrdude -p $(MCU) -c avr109 -P $$USB -U flash:w:$(BUILD_DIR)/$(TARGET).hex
+
+.PHONY: avrdude
--- a/keyboards/handwired/magicforce68/rules.mk
+++ b/keyboards/handwired/magicforce68/rules.mk
@@ -51,20 +51,20 @@ OPT_DEFS += -DBOOTLOADER_SIZE=512
 # Build Options
 #   change yes to no to disable
 #
-BOOTMAGIC_ENABLE ?= no      # Virtual DIP switch configuration(+1000)
-MOUSEKEY_ENABLE ?= yes       # Mouse keys(+4700)
-EXTRAKEY_ENABLE ?= yes       # Audio control and System control(+450)
-CONSOLE_ENABLE ?= yes        # Console for debug(+400)
-COMMAND_ENABLE ?= yes        # Commands for debug and configuration
+BOOTMAGIC_ENABLE = no      # Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE = yes       # Mouse keys(+4700)
+EXTRAKEY_ENABLE = yes       # Audio control and System control(+450)
+CONSOLE_ENABLE = yes        # Console for debug(+400)
+COMMAND_ENABLE = yes        # Commands for debug and configuration
 # Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
-SLEEP_LED_ENABLE ?= no       # Breathing sleep LED during USB suspend
+SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
 # if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
-NKRO_ENABLE ?= no            # USB Nkey Rollover
-BACKLIGHT_ENABLE ?= no       # Enable keyboard backlight functionality on B7 by default
-MIDI_ENABLE ?= no            # MIDI controls
-UNICODE_ENABLE ?= no         # Unicode
-BLUETOOTH_ENABLE ?= no       # Enable Bluetooth with the Adafruit EZ-Key HID
-AUDIO_ENABLE ?= no           # Audio output on port C6
+NKRO_ENABLE = no            # USB Nkey Rollover
+BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality on B7 by default
+MIDI_ENABLE = no            # MIDI controls
+UNICODE_ENABLE = no         # Unicode
+BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
+AUDIO_ENABLE = no           # Audio output on port C6

 ifndef QUANTUM_DIR
 	include ../../../Makefile
--- a/keyboards/handwired/minorca/rules.mk
+++ b/keyboards/handwired/minorca/rules.mk
@@ -50,18 +50,18 @@ OPT_DEFS += -DBOOTLOADER_SIZE=512
 #   change to "no" to disable the options, or define them in the Makefile in 
 #   the appropriate keymap folder that will get included automatically
 #
-BOOTMAGIC_ENABLE ?= yes      # Virtual DIP switch configuration(+1000)
-MOUSEKEY_ENABLE ?= yes       # Mouse keys(+4700)
-EXTRAKEY_ENABLE ?= yes       # Audio control and System control(+450)
-CONSOLE_ENABLE ?= no         # Console for debug(+400)
-COMMAND_ENABLE ?= yes        # Commands for debug and configuration
-NKRO_ENABLE ?= yes           # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
-BACKLIGHT_ENABLE ?= no       # Enable keyboard backlight functionality
-MIDI_ENABLE ?= no            # MIDI controls
-AUDIO_ENABLE ?= no           # Audio output on port C6
-UNICODE_ENABLE ?= no         # Unicode
-BLUETOOTH_ENABLE ?= no       # Enable Bluetooth with the Adafruit EZ-Key HID
-RGBLIGHT_ENABLE ?= yes       # Enable WS2812 RGB underlight.  Do not enable this with audio at the same time.
+BOOTMAGIC_ENABLE = yes      # Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE = yes       # Mouse keys(+4700)
+EXTRAKEY_ENABLE = yes       # Audio control and System control(+450)
+CONSOLE_ENABLE = no         # Console for debug(+400)
+COMMAND_ENABLE = yes        # Commands for debug and configuration
+NKRO_ENABLE = yes           # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality
+MIDI_ENABLE = no            # MIDI controls
+AUDIO_ENABLE = no           # Audio output on port C6
+UNICODE_ENABLE = no         # Unicode
+BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
+RGBLIGHT_ENABLE = yes       # Enable WS2812 RGB underlight.  Do not enable this with audio at the same time.

 # Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
-SLEEP_LED_ENABLE ?= no    # Breathing sleep LED during USB suspend
+SLEEP_LED_ENABLE = no    # Breathing sleep LED during USB suspend
--- a/keyboards/handwired/numpad20/rules.mk
+++ b/keyboards/handwired/numpad20/rules.mk
@@ -51,20 +51,20 @@ OPT_DEFS += -DBOOTLOADER_SIZE=512
 # Build Options
 #   change yes to no to disable
 #
-BOOTMAGIC_ENABLE ?= no      # Virtual DIP switch configuration(+1000)
-MOUSEKEY_ENABLE ?= yes       # Mouse keys(+4700)
-EXTRAKEY_ENABLE ?= yes       # Audio control and System control(+450)
-CONSOLE_ENABLE ?= yes        # Console for debug(+400)
-COMMAND_ENABLE ?= yes        # Commands for debug and configuration
+BOOTMAGIC_ENABLE = no      # Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE = yes       # Mouse keys(+4700)
+EXTRAKEY_ENABLE = yes       # Audio control and System control(+450)
+CONSOLE_ENABLE = yes        # Console for debug(+400)
+COMMAND_ENABLE = yes        # Commands for debug and configuration
 # Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
-SLEEP_LED_ENABLE ?= no       # Breathing sleep LED during USB suspend
+SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
 # if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
-NKRO_ENABLE ?= no            # USB Nkey Rollover
-BACKLIGHT_ENABLE ?= no       # Enable keyboard backlight functionality on B7 by default
-MIDI_ENABLE ?= no            # MIDI controls
-UNICODE_ENABLE ?= no         # Unicode
-BLUETOOTH_ENABLE ?= no       # Enable Bluetooth with the Adafruit EZ-Key HID
-AUDIO_ENABLE ?= no           # Audio output on port C6
+NKRO_ENABLE = no            # USB Nkey Rollover
+BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality on B7 by default
+MIDI_ENABLE = no            # MIDI controls
+UNICODE_ENABLE = no         # Unicode
+BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
+AUDIO_ENABLE = no           # Audio output on port C6

 ifndef QUANTUM_DIR
 	include ../../../Makefile
--- a/keyboards/handwired/onekey/rules.mk
+++ b/keyboards/handwired/onekey/rules.mk
@@ -52,11 +52,11 @@ OPT_DEFS += -DBOOTLOADER_SIZE=4096
 # Build Options
 #   comment out to disable the options.
 #
-BOOTMAGIC_ENABLE ?= no	# Virtual DIP switch configuration(+1000)
-MOUSEKEY_ENABLE ?= yes	# Mouse keys(+4700)
-EXTRAKEY_ENABLE ?= yes	# Audio control and System control(+450)
-CONSOLE_ENABLE ?= yes	# Console for debug(+400)
-COMMAND_ENABLE ?= yes    # Commands for debug and configuration
+BOOTMAGIC_ENABLE = no	# Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE = yes	# Mouse keys(+4700)
+EXTRAKEY_ENABLE = yes	# Audio control and System control(+450)
+CONSOLE_ENABLE = yes	# Console for debug(+400)
+COMMAND_ENABLE = yes    # Commands for debug and configuration
 #SLEEP_LED_ENABLE = yes  # Breathing sleep LED during USB suspend
 #NKRO_ENABLE = yes	# USB Nkey Rollover - not yet supported in LUFA

--- a/keyboards/handwired/ortho5x13/rules.mk
+++ b/keyboards/handwired/ortho5x13/rules.mk
@@ -51,20 +51,20 @@ OPT_DEFS += -DBOOTLOADER_SIZE=512
 # Build Options
 #   change yes to no to disable
 #
-BOOTMAGIC_ENABLE ?= no      # Virtual DIP switch configuration(+1000)
-MOUSEKEY_ENABLE ?= yes       # Mouse keys(+4700)
-EXTRAKEY_ENABLE ?= yes       # Audio control and System control(+450)
-CONSOLE_ENABLE ?= yes        # Console for debug(+400)
-COMMAND_ENABLE ?= yes        # Commands for debug and configuration
+BOOTMAGIC_ENABLE = no      # Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE = yes       # Mouse keys(+4700)
+EXTRAKEY_ENABLE = yes       # Audio control and System control(+450)
+CONSOLE_ENABLE = yes        # Console for debug(+400)
+COMMAND_ENABLE = yes        # Commands for debug and configuration
 # Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
-SLEEP_LED_ENABLE ?= no       # Breathing sleep LED during USB suspend
+SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
 # if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
-NKRO_ENABLE ?= no            # USB Nkey Rollover
-BACKLIGHT_ENABLE ?= no       # Enable keyboard backlight functionality on B7 by default
-MIDI_ENABLE ?= no            # MIDI controls
-UNICODE_ENABLE ?= no         # Unicode
-BLUETOOTH_ENABLE ?= no       # Enable Bluetooth with the Adafruit EZ-Key HID
-AUDIO_ENABLE ?= no           # Audio output on port C6
+NKRO_ENABLE = no            # USB Nkey Rollover
+BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality on B7 by default
+MIDI_ENABLE = no            # MIDI controls
+UNICODE_ENABLE = no         # Unicode
+BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
+AUDIO_ENABLE = no           # Audio output on port C6

 ifndef QUANTUM_DIR
 	include ../../../Makefile
--- a/keyboards/handwired/pilcrow/rules.mk
+++ b/keyboards/handwired/pilcrow/rules.mk
@@ -51,17 +51,17 @@ OPT_DEFS += -DBOOTLOADER_SIZE=512
 # Build Options
 #   change yes to no to disable
 #
-BOOTMAGIC_ENABLE ?= no      # Virtual DIP switch configuration(+1000)
-MOUSEKEY_ENABLE ?= yes       # Mouse keys(+4700)
-EXTRAKEY_ENABLE ?= yes       # Audio control and System control(+450)
-CONSOLE_ENABLE ?= yes        # Console for debug(+400)
-COMMAND_ENABLE ?= yes        # Commands for debug and configuration
+BOOTMAGIC_ENABLE = no      # Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE = yes       # Mouse keys(+4700)
+EXTRAKEY_ENABLE = yes       # Audio control and System control(+450)
+CONSOLE_ENABLE = yes        # Console for debug(+400)
+COMMAND_ENABLE = yes        # Commands for debug and configuration
 # Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
-SLEEP_LED_ENABLE ?= no       # Breathing sleep LED during USB suspend
+SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
 # if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
-NKRO_ENABLE ?= no            # USB Nkey Rollover
-BACKLIGHT_ENABLE ?= no       # Enable keyboard backlight functionality on B7 by default
-MIDI_ENABLE ?= no            # MIDI controls
-UNICODE_ENABLE ?= no         # Unicode
-BLUETOOTH_ENABLE ?= no       # Enable Bluetooth with the Adafruit EZ-Key HID
-AUDIO_ENABLE ?= no           # Audio output on port C6
+NKRO_ENABLE = no            # USB Nkey Rollover
+BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality on B7 by default
+MIDI_ENABLE = no            # MIDI controls
+UNICODE_ENABLE = no         # Unicode
+BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
+AUDIO_ENABLE = no           # Audio output on port C6
--- a/keyboards/handwired/promethium/rules.mk
+++ b/keyboards/handwired/promethium/rules.mk
@@ -50,27 +50,27 @@ OPT_DEFS += -DBOOTLOADER_SIZE=4096
 #   change to "no" to disable the options, or define them in the Makefile in 
 #   the appropriate keymap folder that will get included automatically
 #
-BOOTMAGIC_ENABLE ?= no       # Virtual DIP switch configuration(+1000)
-MOUSEKEY_ENABLE ?= no        # Mouse keys(+4700)
-EXTRAKEY_ENABLE ?= yes       # Audio control and System control(+450)
-CONSOLE_ENABLE ?= no         # Console for debug(+400)
-COMMAND_ENABLE ?= no         # Commands for debug and configuration
-NKRO_ENABLE ?= yes           # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
-BACKLIGHT_ENABLE ?= no       # Enable keyboard backlight functionality
-MIDI_ENABLE ?= no            # MIDI controls
-AUDIO_ENABLE ?= no           # Audio output on port C6
-UNICODE_ENABLE ?= no         # Unicode
-UNICODEMAP_ENABLE ?= yes
-BLUETOOTH_ENABLE ?= no       # Enable Bluetooth with the Adafruit EZ-Key HID
-RGBLIGHT_ENABLE ?= no        # Enable WS2812 RGB underlight.  Do not enable this with audio at the same time.
-PS2_MOUSE_ENABLE ?= yes
-PS2_USE_INT ?= yes
-API_SYSEX_ENABLE ?= no
-CUSTOM_MATRIX ?= yes
-BLUETOOTH ?= AdafruitBLE
+BOOTMAGIC_ENABLE = no       # Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE = no        # Mouse keys(+4700)
+EXTRAKEY_ENABLE = yes       # Audio control and System control(+450)
+CONSOLE_ENABLE = no         # Console for debug(+400)
+COMMAND_ENABLE = no         # Commands for debug and configuration
+NKRO_ENABLE = yes           # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality
+MIDI_ENABLE = no            # MIDI controls
+AUDIO_ENABLE = no           # Audio output on port C6
+UNICODE_ENABLE = no         # Unicode
+UNICODEMAP_ENABLE = yes
+BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
+RGBLIGHT_ENABLE = no        # Enable WS2812 RGB underlight.  Do not enable this with audio at the same time.
+PS2_MOUSE_ENABLE = yes
+PS2_USE_INT = yes
+API_SYSEX_ENABLE = no
+CUSTOM_MATRIX = yes
+BLUETOOTH = AdafruitBLE

 # Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
-SLEEP_LED_ENABLE ?= no    # Breathing sleep LED during USB suspend
+SLEEP_LED_ENABLE = no    # Breathing sleep LED during USB suspend

 SRC += $(QUANTUM_DIR)/light_ws2812.c
 SRC += rgbsps.c
--- a/keyboards/handwired/reddot/rules.mk
+++ b/keyboards/handwired/reddot/rules.mk
@@ -16,7 +16,7 @@ MCU = atmega32u4
 F_CPU = 16000000

 # for avr upload
-USB ?= /dev/cu.usbmodem1421
+USB = /dev/cu.usbmodem1421
 #
 # LUFA specific
 #
@@ -64,20 +64,20 @@ OPT_DEFS += -DBOOTLOADER_SIZE=4096
 # Build Options
 #   change yes to no to disable
 #
-BOOTMAGIC_ENABLE ?= no      # Virtual DIP switch configuration(+1000)
+BOOTMAGIC_ENABLE = no      # Virtual DIP switch configuration(+1000)
 MOUSEKEY_ENABLE = yes       # Mouse keys(+4700)
 EXTRAKEY_ENABLE = yes       # Audio control and System control(+450)
-CONSOLE_ENABLE ?= no        # Console for debug(+400)
-COMMAND_ENABLE ?= no        # Commands for debug and configuration
+CONSOLE_ENABLE = no        # Console for debug(+400)
+COMMAND_ENABLE = no        # Commands for debug and configuration
 # Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
-SLEEP_LED_ENABLE ?= no       # Breathing sleep LED during USB suspend
+SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
 # if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
-NKRO_ENABLE ?= no            # USB Nkey Rollover
-BACKLIGHT_ENABLE ?= no       # Enable keyboard backlight functionality on B7 by default
-MIDI_ENABLE ?= no            # MIDI controls
-UNICODE_ENABLE ?= no         # Unicode
-BLUETOOTH_ENABLE ?= no       # Enable Bluetooth with the Adafruit EZ-Key HID
-AUDIO_ENABLE ?= no           # Audio output on port C6
+NKRO_ENABLE = no            # USB Nkey Rollover
+BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality on B7 by default
+MIDI_ENABLE = no            # MIDI controls
+UNICODE_ENABLE = no         # Unicode
+BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
+AUDIO_ENABLE = no           # Audio output on port C6

 ifndef QUANTUM_DIR
 	include ../../../Makefile
--- a/keyboards/handwired/retro_refit/rules.mk
+++ b/keyboards/handwired/retro_refit/rules.mk
@@ -53,16 +53,16 @@ OPT_DEFS += -DBOOTLOADER_SIZE=512
 # Build Options
 #   comment out to disable the options.
 #
-BOOTMAGIC_ENABLE ?= yes		# Virtual DIP switch configuration(+1000)
-MOUSEKEY_ENABLE ?= yes		# Mouse keys(+4700)
-EXTRAKEY_ENABLE ?= yes		# Audio control and System control(+450)
-CONSOLE_ENABLE ?= yes		# Console for debug(+400)
-COMMAND_ENABLE ?= yes		# Commands for debug and configuration
-KEYBOARD_LOCK_ENABLE ?= yes	# Allow locking of keyboard via magic key
+BOOTMAGIC_ENABLE = yes		# Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE = yes		# Mouse keys(+4700)
+EXTRAKEY_ENABLE = yes		# Audio control and System control(+450)
+CONSOLE_ENABLE = yes		# Console for debug(+400)
+COMMAND_ENABLE = yes		# Commands for debug and configuration
+KEYBOARD_LOCK_ENABLE = yes	# Allow locking of keyboard via magic key
 # Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
-# SLEEP_LED_ENABLE ?= yes	# Breathing sleep LED during USB suspend
-NKRO_ENABLE ?= yes			# USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
-# BACKLIGHT_ENABLE ?= yes	# Enable keyboard backlight functionality
-# MIDI_ENABLE ?= YES			# MIDI controls
-# UNICODE_ENABLE ?= YES		# Unicode
-# BLUETOOTH_ENABLE ?= yes	# Enable Bluetooth with the Adafruit EZ-Key HID
+# SLEEP_LED_ENABLE = yes	# Breathing sleep LED during USB suspend
+NKRO_ENABLE = yes			# USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+# BACKLIGHT_ENABLE = yes	# Enable keyboard backlight functionality
+# MIDI_ENABLE = YES			# MIDI controls
+# UNICODE_ENABLE = YES		# Unicode
+# BLUETOOTH_ENABLE = yes	# Enable Bluetooth with the Adafruit EZ-Key HID
--- a/keyboards/handwired/trackpoint/rules.mk
+++ b/keyboards/handwired/trackpoint/rules.mk
@@ -4,21 +4,21 @@ ARCH = AVR8
 F_USB = $(F_CPU)
 OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
 OPT_DEFS += -DBOOTLOADER_SIZE=512
-BOOTMAGIC_ENABLE ?= no      # Virtual DIP switch configuration(+1000)
-MOUSEKEY_ENABLE ?= yes       # Mouse keys(+4700)
-EXTRAKEY_ENABLE ?= yes       # Audio control and System control(+450)
-CONSOLE_ENABLE ?= yes        # Console for debug(+400)
-COMMAND_ENABLE ?= yes        # Commands for debug and configuration
-SLEEP_LED_ENABLE ?= no       # Breathing sleep LED during USB suspend
-NKRO_ENABLE ?= no            # USB Nkey Rollover
-BACKLIGHT_ENABLE ?= no       # Enable keyboard backlight functionality on B7 by default
-MIDI_ENABLE ?= no            # MIDI controls
-UNICODE_ENABLE ?= no         # Unicode
-BLUETOOTH_ENABLE ?= no       # Enable Bluetooth with the Adafruit EZ-Key HID
-AUDIO_ENABLE ?= no           # Audio output on port C6
+BOOTMAGIC_ENABLE = no      # Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE = yes       # Mouse keys(+4700)
+EXTRAKEY_ENABLE = yes       # Audio control and System control(+450)
+CONSOLE_ENABLE = yes        # Console for debug(+400)
+COMMAND_ENABLE = yes        # Commands for debug and configuration
+SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
+NKRO_ENABLE = no            # USB Nkey Rollover
+BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality on B7 by default
+MIDI_ENABLE = no            # MIDI controls
+UNICODE_ENABLE = no         # Unicode
+BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
+AUDIO_ENABLE = no           # Audio output on port C6

-PS2_MOUSE_ENABLE ?= yes
-PS2_USE_USART ?= yes
+PS2_MOUSE_ENABLE = yes
+PS2_USE_USART = yes

 ifndef QUANTUM_DIR
 	include ../../Makefile
--- a/keyboards/handwired/traveller/rules.mk
+++ b/keyboards/handwired/traveller/rules.mk
@@ -16,7 +16,7 @@ MCU = atmega32u4
 F_CPU = 16000000

 # for avr upload
-USB ?= /dev/cu.usbmodem1421
+USB = /dev/cu.usbmodem1421
 #
 # LUFA specific
 #
@@ -64,20 +64,20 @@ OPT_DEFS += -DBOOTLOADER_SIZE=4096
 # Build Options
 #   change yes to no to disable
 #
-BOOTMAGIC_ENABLE ?= no      # Virtual DIP switch configuration(+1000)
+BOOTMAGIC_ENABLE = no      # Virtual DIP switch configuration(+1000)
 MOUSEKEY_ENABLE = yes       # Mouse keys(+4700)
 EXTRAKEY_ENABLE = yes       # Audio control and System control(+450)
-CONSOLE_ENABLE ?= no        # Console for debug(+400)
-COMMAND_ENABLE ?= no        # Commands for debug and configuration
+CONSOLE_ENABLE = no        # Console for debug(+400)
+COMMAND_ENABLE = no        # Commands for debug and configuration
 # Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
-SLEEP_LED_ENABLE ?= no       # Breathing sleep LED during USB suspend
+SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
 # if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
-NKRO_ENABLE ?= no            # USB Nkey Rollover
-BACKLIGHT_ENABLE ?= no       # Enable keyboard backlight functionality on B7 by default
-MIDI_ENABLE ?= no            # MIDI controls
-UNICODE_ENABLE ?= no         # Unicode
-BLUETOOTH_ENABLE ?= no       # Enable Bluetooth with the Adafruit EZ-Key HID
-AUDIO_ENABLE ?= no           # Audio output on port C6
+NKRO_ENABLE = no            # USB Nkey Rollover
+BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality on B7 by default
+MIDI_ENABLE = no            # MIDI controls
+UNICODE_ENABLE = no         # Unicode
+BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
+AUDIO_ENABLE = no           # Audio output on port C6
 RGBLIGHT_ENABLE = yes

 ifndef QUANTUM_DIR
--- a/keyboards/hhkb/rules.mk
+++ b/keyboards/hhkb/rules.mk
@@ -58,19 +58,19 @@ OPT_DEFS += -DBOOTLOADER_SIZE=4096
 # Build Options
 #   comment out to disable the options.
 #
-BOOTMAGIC_ENABLE ?= yes # Virtual DIP switch configuration(+1000)
-MOUSEKEY_ENABLE ?= yes  # Mouse keys(+4700)
-EXTRAKEY_ENABLE ?= yes  # Audio control and System control(+450)
-CONSOLE_ENABLE ?= yes   # Console for debug(+400)
-COMMAND_ENABLE ?= yes   # Commands for debug and configuration
-CUSTOM_MATRIX ?= yes    # Custom matrix file for the HHKB
+BOOTMAGIC_ENABLE = yes # Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE = yes  # Mouse keys(+4700)
+EXTRAKEY_ENABLE = yes  # Audio control and System control(+450)
+CONSOLE_ENABLE = yes   # Console for debug(+400)
+COMMAND_ENABLE = yes   # Commands for debug and configuration
+CUSTOM_MATRIX = yes    # Custom matrix file for the HHKB
 # Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
-# SLEEP_LED_ENABLE ?= yes  # Breathing sleep LED during USB suspend
-# NKRO_ENABLE ?= yes       # USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
-# BACKLIGHT_ENABLE ?= yes  # Enable keyboard backlight functionality
-# MIDI_ENABLE ?= yes       # MIDI controls
-# UNICODE_ENABLE ?= yes    # Unicode
-# BLUETOOTH_ENABLE ?= yes  # Enable Bluetooth with the Adafruit EZ-Key HID
+# SLEEP_LED_ENABLE = yes  # Breathing sleep LED during USB suspend
+# NKRO_ENABLE = yes       # USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+# BACKLIGHT_ENABLE = yes  # Enable keyboard backlight functionality
+# MIDI_ENABLE = yes       # MIDI controls
+# UNICODE_ENABLE = yes    # Unicode
+# BLUETOOTH_ENABLE = yes  # Enable Bluetooth with the Adafruit EZ-Key HID

 debug-on: EXTRAFLAGS += -DDEBUG -DDEBUG_ACTION
 debug-on: all
--- a/keyboards/infinity60/rules.mk
+++ b/keyboards/infinity60/rules.mk
@@ -56,12 +56,12 @@ OPT_DEFS = -DCORTEX_VTOR_INIT=0x00001000
 # Build Options
 #   comment out to disable the options.
 #
-BOOTMAGIC_ENABLE ?= no	# Virtual DIP switch configuration
+BOOTMAGIC_ENABLE = no	# Virtual DIP switch configuration
 ## (Note that for BOOTMAGIC on Teensy LC you have to use a custom .ld script.)
-MOUSEKEY_ENABLE ?= yes	# Mouse keys
-EXTRAKEY_ENABLE ?= yes	# Audio control and System control
-CONSOLE_ENABLE ?= yes	# Console for debug
-COMMAND_ENABLE ?= yes    # Commands for debug and configuration
-SLEEP_LED_ENABLE ?= yes  # Breathing sleep LED during USB suspend
-NKRO_ENABLE ?= yes	    # USB Nkey Rollover
-CUSTOM_MATRIX ?= yes # Custom matrix file
+MOUSEKEY_ENABLE = yes	# Mouse keys
+EXTRAKEY_ENABLE = yes	# Audio control and System control
+CONSOLE_ENABLE = yes	# Console for debug
+COMMAND_ENABLE = yes    # Commands for debug and configuration
+SLEEP_LED_ENABLE = yes  # Breathing sleep LED during USB suspend
+NKRO_ENABLE = yes	    # USB Nkey Rollover
+CUSTOM_MATRIX = yes # Custom matrix file
--- a/keyboards/jd40/rules.mk
+++ b/keyboards/jd40/rules.mk
@@ -53,17 +53,17 @@ OPT_DEFS += -DBOOTLOADER_SIZE=4096
 # Build Options
 #   comment out to disable the options.
 #
-BOOTMAGIC_ENABLE ?= yes		# Virtual DIP switch configuration(+1000)
-MOUSEKEY_ENABLE ?= yes		# Mouse keys(+4700)
-EXTRAKEY_ENABLE ?= yes		# Audio control and System control(+450)
-# CONSOLE_ENABLE ?= yes		# Console for debug(+400)
-# COMMAND_ENABLE ?= yes		# Commands for debug and configuration
-KEYBOARD_LOCK_ENABLE ?= yes	# Allow locking of keyboard via magic key
+BOOTMAGIC_ENABLE = yes		# Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE = yes		# Mouse keys(+4700)
+EXTRAKEY_ENABLE = yes		# Audio control and System control(+450)
+# CONSOLE_ENABLE = yes		# Console for debug(+400)
+# COMMAND_ENABLE = yes		# Commands for debug and configuration
+KEYBOARD_LOCK_ENABLE = yes	# Allow locking of keyboard via magic key
 # Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
-# SLEEP_LED_ENABLE ?= yes	# Breathing sleep LED during USB suspend
-NKRO_ENABLE ?= yes			# USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
-# BACKLIGHT_ENABLE ?= yes	# Enable keyboard backlight functionality
-# MIDI_ENABLE ?= YES			# MIDI controls
-# UNICODE_ENABLE ?= YES		# Unicode
-# BLUETOOTH_ENABLE ?= yes	# Enable Bluetooth with the Adafruit EZ-Key HID
-RGBLIGHT_ENABLE ?= yes          # Enable RGB Underglow
+# SLEEP_LED_ENABLE = yes	# Breathing sleep LED during USB suspend
+NKRO_ENABLE = yes			# USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+# BACKLIGHT_ENABLE = yes	# Enable keyboard backlight functionality
+# MIDI_ENABLE = YES			# MIDI controls
+# UNICODE_ENABLE = YES		# Unicode
+# BLUETOOTH_ENABLE = yes	# Enable Bluetooth with the Adafruit EZ-Key HID
+RGBLIGHT_ENABLE = yes          # Enable RGB Underglow
--- a/keyboards/jd45/rules.mk
+++ b/keyboards/jd45/rules.mk
@@ -53,15 +53,15 @@ OPT_DEFS += -DBOOTLOADER_SIZE=4096
 # Build Options
 #   comment out to disable the options.
 #
-BOOTMAGIC_ENABLE ?= yes	# Virtual DIP switch configuration(+1000)
-MOUSEKEY_ENABLE ?= yes	# Mouse keys(+4700)
-EXTRAKEY_ENABLE ?= yes	# Audio control and System control(+450)
-CONSOLE_ENABLE ?= yes	# Console for debug(+400)
-COMMAND_ENABLE ?= yes    # Commands for debug and configuration
+BOOTMAGIC_ENABLE = yes	# Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE = yes	# Mouse keys(+4700)
+EXTRAKEY_ENABLE = yes	# Audio control and System control(+450)
+CONSOLE_ENABLE = yes	# Console for debug(+400)
+COMMAND_ENABLE = yes    # Commands for debug and configuration
 # Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
-# SLEEP_LED_ENABLE ?= yes  # Breathing sleep LED during USB suspend
-# NKRO_ENABLE ?= yes		# USB Nkey Rollover - not yet supported in LUFA
-BACKLIGHT_ENABLE ?= yes  # Enable keyboard backlight functionality
-MIDI_ENABLE ?= YES 		# MIDI controls
-# UNICODE_ENABLE ?= YES 		# Unicode
-BLUETOOTH_ENABLE ?= yes # Enable Bluetooth with the Adafruit EZ-Key HID
+# SLEEP_LED_ENABLE = yes  # Breathing sleep LED during USB suspend
+# NKRO_ENABLE = yes		# USB Nkey Rollover - not yet supported in LUFA
+BACKLIGHT_ENABLE = yes  # Enable keyboard backlight functionality
+MIDI_ENABLE = YES 		# MIDI controls
+# UNICODE_ENABLE = YES 		# Unicode
+BLUETOOTH_ENABLE = yes # Enable Bluetooth with the Adafruit EZ-Key HID
--- a/keyboards/kbd75/rules.mk
+++ b/keyboards/kbd75/rules.mk
@@ -44,13 +44,13 @@ OPT_DEFS += -DBOOTLOADER_SIZE=4096
 # Build Options
 #   comment out to disable the options.
 #
-BOOTMAGIC_ENABLE ?= yes	# Virtual DIP switch configuration(+1000)
-MOUSEKEY_ENABLE ?= yes	# Mouse keys(+4700)
-EXTRAKEY_ENABLE ?= yes	# Audio control and System control(+450)
-CONSOLE_ENABLE ?= no	# Console for debug(+400)
-COMMAND_ENABLE ?= no    # Commands for debug and configuration
-SLEEP_LED_ENABLE ?= no  # Breathing sleep LED during USB suspend
-NKRO_ENABLE ?= yes		# USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
-BACKLIGHT_ENABLE ?= yes  # Enable keyboard backlight functionality
-AUDIO_ENABLE ?= no
-RGBLIGHT_ENABLE ?= yes
+BOOTMAGIC_ENABLE = yes	# Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE = yes	# Mouse keys(+4700)
+EXTRAKEY_ENABLE = yes	# Audio control and System control(+450)
+CONSOLE_ENABLE = no	# Console for debug(+400)
+COMMAND_ENABLE = no    # Commands for debug and configuration
+SLEEP_LED_ENABLE = no  # Breathing sleep LED during USB suspend
+NKRO_ENABLE = yes		# USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+BACKLIGHT_ENABLE = yes  # Enable keyboard backlight functionality
+AUDIO_ENABLE = no
+RGBLIGHT_ENABLE = yes
--- a/keyboards/kc60/keymaps/stanleylai/Makefile
+++ b/keyboards/kc60/keymaps/stanleylai/Makefile
@@ -3,22 +3,22 @@
 # Build Options
 #   change yes to no to disable
 #
-BOOTMAGIC_ENABLE ?= yes      # Virtual DIP switch configuration(+1000)
-MOUSEKEY_ENABLE ?= no        # Mouse keys(+4700)
-EXTRAKEY_ENABLE ?= yes       # Audio control and System control(+450)
-CONSOLE_ENABLE ?= no         # Console for debug(+400)
-COMMAND_ENABLE ?= no         # Commands for debug and configuration
-KEYBOARD_LOCK_ENABLE ?= yes  # Allow locking of keyboard via magic key
-BACKLIGHT_ENABLE ?= yes      # Enable keyboard backlight functionality
-RGBLIGHT_ENABLE ?= yes 			 # Enable WS2812 underglow RGB strip
-MIDI_ENABLE ?= no            # MIDI controls
-UNICODE_ENABLE ?= no         # Unicode
-BLUETOOTH_ENABLE ?= no       # Enable Bluetooth with the Adafruit EZ-Key HID
-AUDIO_ENABLE ?= no           # Audio output on port C6
+BOOTMAGIC_ENABLE = yes      # Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE = no        # Mouse keys(+4700)
+EXTRAKEY_ENABLE = yes       # Audio control and System control(+450)
+CONSOLE_ENABLE = no         # Console for debug(+400)
+COMMAND_ENABLE = no         # Commands for debug and configuration
+KEYBOARD_LOCK_ENABLE = yes  # Allow locking of keyboard via magic key
+BACKLIGHT_ENABLE = yes      # Enable keyboard backlight functionality
+RGBLIGHT_ENABLE = yes 			 # Enable WS2812 underglow RGB strip
+MIDI_ENABLE = no            # MIDI controls
+UNICODE_ENABLE = no         # Unicode
+BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
+AUDIO_ENABLE = no           # Audio output on port C6
 # Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
-SLEEP_LED_ENABLE ?= no       # Breathing sleep LED during USB suspend
+SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
 # if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
-NKRO_ENABLE ?= yes           # USB Nkey Rollover
+NKRO_ENABLE = yes           # USB Nkey Rollover

 ifndef QUANTUM_DIR
 	include ../../../../Makefile
--- a/keyboards/kc60/keymaps/wigguno/Makefile
+++ b/keyboards/kc60/keymaps/wigguno/Makefile
@@ -3,21 +3,21 @@
 # Build Options
 #   change yes to no to disable
 #
-BOOTMAGIC_ENABLE ?= yes      # Virtual DIP switch configuration(+1000)
-MOUSEKEY_ENABLE ?= no        # Mouse keys(+4700)
-EXTRAKEY_ENABLE ?= yes       # Audio control and System control(+450)
-CONSOLE_ENABLE ?= no         # Console for debug(+400)
-COMMAND_ENABLE ?= no         # Commands for debug and configuration
-KEYBOARD_LOCK_ENABLE ?= yes  # Allow locking of keyboard via magic key
+BOOTMAGIC_ENABLE = yes      # Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE = no        # Mouse keys(+4700)
+EXTRAKEY_ENABLE = yes       # Audio control and System control(+450)
+CONSOLE_ENABLE = no         # Console for debug(+400)
+COMMAND_ENABLE = no         # Commands for debug and configuration
+KEYBOARD_LOCK_ENABLE = yes  # Allow locking of keyboard via magic key
 # Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
-SLEEP_LED_ENABLE ?= no       # Breathing sleep LED during USB suspend
+SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
 # if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
-NKRO_ENABLE ?= yes           # USB Nkey Rollover
-BACKLIGHT_ENABLE ?= yes      # Enable keyboard backlight functionality
-MIDI_ENABLE ?= no            # MIDI controls
-UNICODE_ENABLE ?= no         # Unicode
-BLUETOOTH_ENABLE ?= no       # Enable Bluetooth with the Adafruit EZ-Key HID
-AUDIO_ENABLE ?= no           # Audio output on port C6
+NKRO_ENABLE = yes           # USB Nkey Rollover
+BACKLIGHT_ENABLE = yes      # Enable keyboard backlight functionality
+MIDI_ENABLE = no            # MIDI controls
+UNICODE_ENABLE = no         # Unicode
+BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
+AUDIO_ENABLE = no           # Audio output on port C6

 ifndef QUANTUM_DIR
 	include ../../../../Makefile
--- a/keyboards/kc60/keymaps/ws2812/Makefile
+++ b/keyboards/kc60/keymaps/ws2812/Makefile
@@ -3,22 +3,22 @@
 # Build Options
 #   change yes to no to disable
 #
-BOOTMAGIC_ENABLE ?= yes      # Virtual DIP switch configuration(+1000)
-MOUSEKEY_ENABLE ?= yes       # Mouse keys(+4700)
-EXTRAKEY_ENABLE ?= yes       # Audio control and System control(+450)
-CONSOLE_ENABLE ?= yes        # Console for debug(+400)
-COMMAND_ENABLE ?= yes        # Commands for debug and configuration
-KEYBOARD_LOCK_ENABLE ?= yes  # Allow locking of keyboard via magic key
-BACKLIGHT_ENABLE ?= yes      # Enable keyboard backlight functionality
-RGBLIGHT_ENABLE ?= yes 			 # Enable WS2812 underglow RGB strip
-MIDI_ENABLE ?= no            # MIDI controls
-UNICODE_ENABLE ?= no         # Unicode
-BLUETOOTH_ENABLE ?= no       # Enable Bluetooth with the Adafruit EZ-Key HID
-AUDIO_ENABLE ?= no           # Audio output on port C6
+BOOTMAGIC_ENABLE = yes      # Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE = yes       # Mouse keys(+4700)
+EXTRAKEY_ENABLE = yes       # Audio control and System control(+450)
+CONSOLE_ENABLE = yes        # Console for debug(+400)
+COMMAND_ENABLE = yes        # Commands for debug and configuration
+KEYBOARD_LOCK_ENABLE = yes  # Allow locking of keyboard via magic key
+BACKLIGHT_ENABLE = yes      # Enable keyboard backlight functionality
+RGBLIGHT_ENABLE = yes 			 # Enable WS2812 underglow RGB strip
+MIDI_ENABLE = no            # MIDI controls
+UNICODE_ENABLE = no         # Unicode
+BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
+AUDIO_ENABLE = no           # Audio output on port C6
 # Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
-SLEEP_LED_ENABLE ?= no       # Breathing sleep LED during USB suspend
+SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
 # if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
-NKRO_ENABLE ?= no            # USB Nkey Rollover
+NKRO_ENABLE = no            # USB Nkey Rollover

 ifndef QUANTUM_DIR
 	include ../../../../Makefile
--- a/keyboards/kc60/rules.mk
+++ b/keyboards/kc60/rules.mk
@@ -51,18 +51,18 @@ OPT_DEFS += -DBOOTLOADER_SIZE=4096
 # Build Options
 #   change yes to no to disable
 #
-BOOTMAGIC_ENABLE ?= no       # Virtual DIP switch configuration(+1000)
-MOUSEKEY_ENABLE ?= yes       # Mouse keys(+4700)
-EXTRAKEY_ENABLE ?= yes       # Audio control and System control(+450)
-CONSOLE_ENABLE ?= yes        # Console for debug(+400)
-COMMAND_ENABLE ?= yes        # Commands for debug and configuration
-KEYBOARD_LOCK_ENABLE ?= yes  # Allow locking of keyboard via magic key
+BOOTMAGIC_ENABLE = no       # Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE = yes       # Mouse keys(+4700)
+EXTRAKEY_ENABLE = yes       # Audio control and System control(+450)
+CONSOLE_ENABLE = yes        # Console for debug(+400)
+COMMAND_ENABLE = yes        # Commands for debug and configuration
+KEYBOARD_LOCK_ENABLE = yes  # Allow locking of keyboard via magic key
 # Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
-SLEEP_LED_ENABLE ?= no       # Breathing sleep LED during USB suspend
+SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
 # if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
-NKRO_ENABLE ?= no            # USB Nkey Rollover
-BACKLIGHT_ENABLE ?= yes      # Enable keyboard backlight functionality
-MIDI_ENABLE ?= no            # MIDI controls
-UNICODE_ENABLE ?= no         # Unicode
-BLUETOOTH_ENABLE ?= no       # Enable Bluetooth with the Adafruit EZ-Key HID
-AUDIO_ENABLE ?= no           # Audio output on port C6
+NKRO_ENABLE = no            # USB Nkey Rollover
+BACKLIGHT_ENABLE = yes      # Enable keyboard backlight functionality
+MIDI_ENABLE = no            # MIDI controls
+UNICODE_ENABLE = no         # Unicode
+BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
+AUDIO_ENABLE = no           # Audio output on port C6
--- a/Show More
+++ b/Show More
Author	SHA1	Message	Date
Jack Humbert	9de443cbf1	Merge pull request #1471 from qmk/lufa_lib Update LUFA and move it to /lib/lufa	2017-07-07 15:33:29 -04:00
Maarten Dekkers	88b3d051b2	Corrected it again.	2017-07-07 15:33:09 -04:00
Maarten Dekkers	53acc7b074	Cleaned and corrected keymap code	2017-07-07 15:33:09 -04:00
Maarten Dekkers	68cf0d454c	Own keymap layout	2017-07-07 15:33:09 -04:00
Ethan Spitz	53174036e9	Add new keymap to try to get pretty close to the default layout for an ergodox keyboard. Coming from that I really like being able to use the backspace from my left thumb.	2017-07-07 15:13:18 -04:00
Jack Humbert	1c26468ad5	update include	2017-07-07 14:53:47 -04:00
Jack Humbert	7bddacf25f	update lets_split lufa include	2017-07-07 13:32:29 -04:00
Jack Humbert	4b37030ad0	update lufa implementation	2017-07-07 12:06:59 -04:00
Jack Humbert	39ece81979	delete old lufa	2017-07-07 11:56:51 -04:00
Jack Humbert	8655d4f494	Merge commit '60b30c036397cb5627fa374bb930794b225daa29' as 'lib/lufa'	2017-07-07 11:55:23 -04:00
Jack Humbert	60b30c0363	Squashed 'lib/lufa/' content from commit 385d40300 git-subtree-dir: lib/lufa git-subtree-split: 385d4030035dbaf41591309dbde47653bd03841b	2017-07-07 11:55:23 -04:00
cato976	1896c76a29	Update mouse_keys.md fix typo	2017-07-06 10:01:12 -04:00
Maarten Dekkers	58139f87e4	Fixed arrow up and rgb config	2017-07-05 11:48:19 -04:00
Maarten Dekkers	684c381aee	Moved RGB features to new layout	2017-07-05 11:48:19 -04:00
Maarten Dekkers	c6d544bbb0	Fixed image description	2017-07-05 11:48:19 -04:00
Maarten Dekkers	7f82275a4d	Added support for RGB on the Tada68	2017-07-05 11:48:19 -04:00
Andreas Lindhé	b228cf7ba4	Update readme	2017-07-05 10:56:53 -04:00
Andreas Lindhé	41b23af60e	Create custom layout based on swedish This is a setup that is very useful for me. It may or may not be for you. I will use it in conjunction with the A5 overlayed sv_SE layout. The layout is subject to change (in particular I'm thinking about adding a macro recording feature), but it have not changed much the past year or two so you can expect it to be stable enough to learn it. A5: http://aoeu.info/s/dvorak/svorak My xkb map: https://github.com/lindhe/dotfiles/blob/master/usr/share/X11/xkb/symbols/se-A5 The most major points: ====================== L0: --- * Easily accessible F11 key for fullscreening * Print screen * Middle mouse button for X-paste * Improved reachability of meta buttons (LCtrl, LALt, AltGr, LGui etc.) * Cluster Page Up/Down + Home/End by the right thumb * Vim-like arrow layout in right bottom row * Set media layer toggle to right thumb (Enter) * Set apostrophe on LCtl (putting it next to some other small characters) L1: --- * Full function key layout * Teensy button L2: --- * Improved media buttons layout (close by the jkl; Vim binding) * Improved layout of emulated mouse buttons LED behaviour to binary+CAPS ============================ The ErgoDox LEDs on this layout is using the two rightmost LEDs as the two LSB in a two digit binary number, representing layer 0, 1, 2 and 3. The leftmost byte/LED indicates CAPS status.	2017-07-05 10:56:53 -04:00
Shayne Holmes	48ff93582b	Pull out sendstring variations to their own files. Instead of having all sendstring keycode mappings in the main quantum.c file, give each one its own file in keymap_extras that can be #included in a user's keymap. If one is included, it will define the appropriate lookup tables and overwrite the weak definitions in quantum.c. (Including more than one sendstring definition will fail at compile time.) Update @rai-suta's test keymap to match, as well as the documentation.	2017-07-05 10:55:47 -04:00
Shayne Holmes	fdc2e8058b	Allow broader send_string layout customizability via compile flag Refactor new-ish JIS_KEYCODE send_string implementation with existing send_string Reshuffle JIS in line with other alternative keycodes for sendstring, and make them all accessible via compile-time options Add a separate function to allow sending a string with a delay.	2017-07-05 10:55:47 -04:00
dbroqua	c41d40c422	- Fixed wording in readme	2017-07-05 09:59:37 -04:00
dbroqua	d638547cd0	- Updated dk60 readme with new QMK rules	2017-07-05 09:59:37 -04:00
dbroqua	4587bb8786	- Fixed DK60 version in config.h	2017-07-05 09:59:37 -04:00
skullydazed	60eb2e140d	Update the clueboard readmes (#1459 )	2017-07-05 00:15:09 -07:00
That-Canadian	b3d2f05032	Changed - to _ for keymap that-canadian for compatability reasons.	2017-07-04 16:43:19 -04:00
That-Canadian	2cf97c6d90	Updated ECO files to follow proper formatting. Also updated that-canadian keymap to take out extraneous characters.	2017-07-04 16:43:19 -04:00
That-Canadian	f7b8148c12	Updated ECO readme file, includes picture of ECO now.	2017-07-04 16:43:19 -04:00
That-Canadian	dbcf0ba6ca	Added ECO keyboard folder and configuration files. Also added my (That-Canadian) keymap folder and files.	2017-07-04 16:43:19 -04:00
Martin Gondermann	34c8bf47a7	Move Space Caded Parentheses to own layer (#1452 ) * Move Space Caded Parentheses to own layer The space cadet parentheses where too much distracting. Therefore they are now on the function layer. I also added two more layers for also having angle brackets and curly braces on the shift keys forr better access. Also updated the README * Fixed SHIFT+Function key conflict * Removed Angle Bracket and Curly Bracket layers, as they don't work corrrectly	2017-07-03 11:48:48 -07:00
Kyle Terry	062b3547ed	Keyboards/handwired magicforce61 (#1454 ) * adding the magicforce61 under handwired * I meant 14 cols	2017-07-03 11:47:48 -07:00
Martin Gondermann	827dc6c715	Add octave lights for midi layer (#1457 )	2017-07-03 11:43:32 -07:00
Jack Humbert	fe47b36065	fix tag increment	2017-07-03 00:23:37 -04:00
Jack Humbert	ea134be36a	fix up travis script	2017-07-02 23:38:20 -04:00
Jack Humbert	b7afa59c97	remove warning	2017-06-30 16:33:49 -04:00
Jack Humbert	753809eed7	adds debouncing to sixkeyboard	2017-06-30 16:33:49 -04:00
Jack Humbert	b476d65b9c	Update keyboards' rules.mk/Makefiles (#1442 ) this may change some of the keyboards' default settings - if you experience anything odd, please check back to this commit	2017-06-30 16:09:52 -04:00
Jack Humbert	61ef949576	update some copyright headers	2017-06-28 12:58:58 -04:00
Jack Humbert	56634ca065	cleanup nyquist	2017-06-28 10:42:23 -04:00
Jack Humbert	663d3906ec	cleanup orthodox	2017-06-28 10:42:23 -04:00
Jack Humbert	f5f7dfa064	cleanup lets_split	2017-06-28 10:42:23 -04:00
Jack Humbert	4ea247e673	create initial code of conduct	2017-06-27 21:36:44 -04:00
Jack Humbert	a52836e669	Merge pull request #1445 from qmk/dual_audio Allow for duophony (C6 and B5) and B5 audio	2017-06-27 16:57:19 -04:00
Jack Humbert	7d28a417c0	don't let timer1 exist without b5 being enabled	2017-06-27 15:28:13 -04:00
Jack Humbert	ea7590c894	add new arguements, docs	2017-06-27 14:35:08 -04:00
Jack Humbert	9f5b4e1d7a	Merge branch 'master' of https://github.com/qmk/qmk_firmware into dual_audio	2017-06-27 14:21:42 -04:00
Jack Humbert	b82604dada	no glide	2017-06-27 14:20:53 -04:00
Jack Humbert	bfc73e90cf	working duopholy	2017-06-27 14:20:44 -04:00
Jack Humbert	eabf530a0e	b5 audio	2017-06-27 14:20:14 -04:00
Jack Humbert	4ba9438c3f	Add eclipse to the _summary	2017-06-27 13:07:50 -04:00
Jack Humbert	b2979eba23	Adds parenthesis where they might be needed Addresses #764	2017-06-27 12:55:18 -04:00
Erez Zukerman	98391605ca	Merge pull request #1441 from lindhe/swedish Create sv_SE Qwerty layout for ErgoDox EZ	2017-06-27 11:33:29 -04:00
Andreas Lindhé	a25dbaad32	Create sv_SE Qwerty layout for ErgoDox NOTE: it might still be desirable to set the software layout to sv_SE in your OS. Swedish (sv_SE) Qwerty layout for ErgoDox, based on the Default configuration I have tried making this as close of a match I could between the [default ErgoDox EZ configuration](https://ergodox-ez.com/pages/our-firmware) and a standard Swedish Qwerty layout. Notable differences from default: ================================= * There are three special character buttons (acute accent, circumflex/tilde and apostrophe/asterisk) that don't have any buttons to map to naturally. I've put these at other places: * Acute accent (´) can be found in the lower left corner, conveniently placed to reach for making an é. * Apostrophe (') was put in the lower left corner, close to acute accent. * Circumflex (^) and asterisk () was placed in the lower right corner. Tilde (~) and diaeresis (¨) I couldn't find a good place for, so I left those out. I could only get the buttons to produce a single one of the characters. How can I get it to work properly? * The Alt button on right thumb was exchanged for AltGr (RAlt). * I changed the backslash in the numpad (layer 1) for a minus. Thought it was more sensible. * I didn't find a good place for the "<>\|" button, so that one was left out. That is a problem that really needs to be resolved. Pipe can be found on layer one, however.	2017-06-27 15:17:21 +02:00
Jack Humbert	61cdc9aaa4	Allow mod swapping for mod tap (MT) (#1202 ) * allow mod swapping for mod tap * quick include * fix the mod swapping * make changes consistent with action code * fix bug * re-enable no gui, etc * fix binary comps * solid logic	2017-06-26 18:54:01 -04:00