fix for toggle tap dance

* Remove all Makefiles from the keyboards directory.

* update keymaps added in the last 8 days

* Ignore keyboard/keymap makefiles

* update hand_wire to reflect our new Makefile-less reality

* Update the make guide to reflect the new reality

* move planck keymap options to rules.mk

* update planck keymaps 4real

* trigger travis

* add back build_keyboard.mk

* restore changes to build_keyboard

.gitignore

@@ -24,6 +24,9 @@ CMakeLists.txt
 .DS_STORE
 /util/wsl_downloaded
 /util/win_downloaded
+/keyboards/*/Makefile
+/keyboards/*/*/Makefile
+/keyboards/*/keymaps/Makefile
 
 # Eclipse/PyCharm/Other IDE Settings
 .cproject

Makefile

@@ -89,7 +89,7 @@ ifeq ($(CURRENT_PATH_ELEMENT),keyboards)
 endif
 
 # Only consider folders with makefiles, to prevent errors in case there are extra folders
-KEYBOARDS := $(notdir $(patsubst %/Makefile,%,$(wildcard $(ROOT_DIR)/keyboards/*/Makefile)))
+KEYBOARDS := $(notdir $(patsubst %/rules.mk,%,$(wildcard $(ROOT_DIR)/keyboards/*/rules.mk)))
 
 #Compatibility with the old make variables, anything you specify directly on the command line
 # always overrides the detected folders
@@ -261,7 +261,7 @@ endef
 define PARSE_KEYBOARD
     CURRENT_KB := $1
     # A subproject is any keyboard subfolder with a makefile
-    SUBPROJECTS := $$(notdir $$(patsubst %/Makefile,%,$$(wildcard $(ROOT_DIR)/keyboards/$$(CURRENT_KB)/*/Makefile)))
+    SUBPROJECTS := $$(notdir $$(patsubst %/rules.mk,%,$$(wildcard $(ROOT_DIR)/keyboards/$$(CURRENT_KB)/*/rules.mk)))
     # if the rule starts with allsp, then continue with looping over all subprojects
     ifeq ($$(call COMPARE_AND_REMOVE_FROM_RULE,allsp),true)
         $$(eval $$(call PARSE_ALL_SUBPROJECTS))
@@ -300,7 +300,9 @@ define PARSE_SUBPROJECT
     endif
     ifeq ($$(CURRENT_SP),defaultsp)
         SUBPROJECT_DEFAULT=
-        $$(eval include $(ROOT_DIR)/keyboards/$$(CURRENT_KB)/Makefile)
+        ifneq ("$(wildcard $(ROOT_DIR)/keyboards/$$(CURRENT_KB)/subproject.mk)","")
+            $$(eval include $(ROOT_DIR)/keyboards/$$(CURRENT_KB)/subproject.mk)
+        endif
         CURRENT_SP := $$(SUBPROJECT_DEFAULT)
     endif
     # If current subproject is empty (the default was not defined), and we have a list of subproject
@@ -503,7 +505,7 @@ if [ $$error_occurred -gt 0 ]; then $(HANDLE_ERROR); fi;
 endef
 
 # Allow specifying just the subproject, in the keyboard directory, which will compile all keymaps
-SUBPROJECTS := $(notdir $(patsubst %/Makefile,%,$(wildcard ./*/Makefile)))
+SUBPROJECTS := $(notdir $(patsubst %/rules.mk,%,$(wildcard ./*/rules.mk)))
 .PHONY: $(SUBPROJECTS)
 $(SUBPROJECTS): %: %-allkm
 
@@ -514,6 +516,9 @@ $(SUBPROJECTS): %: %-allkm
 	cmp $(ROOT_DIR)/Makefile $(ROOT_DIR)/Makefile >/dev/null 2>&1; if [ $$? -gt 0 ]; then printf "$(MSG_NO_CMP)"; exit 1; fi;
 	# Check if the submodules are dirty, and display a warning if they are
 ifndef SKIP_GIT
+	if [ ! -e lib/chibios ]; then git submodule sync lib/chibios && git submodule update --init lib/chibios; fi
+	if [ ! -e lib/chibios-contrib ]; then git submodule sync lib/chibios-contrib && git submodule update --init lib/chibios-contrib; fi
+	if [ ! -e lib/ugfx ]; then git submodule sync lib/ugfx && git submodule update --init lib/ugfx; fi
 	git submodule status --recursive 2>/dev/null | \
 	while IFS= read -r x; do \
 		case "$$x" in \
@@ -551,6 +556,10 @@ test: test-all
 .PHONY: test-clean
 test-clean: test-all-clean
 
+lib/%:
+	git submodule sync $?
+	git submodule update --init $?
+
 git-submodule:
 	git submodule sync --recursive
 	git submodule update --init --recursive

build_keyboard.mk

@@ -91,11 +91,11 @@ MAIN_KEYMAP_C := $(MAIN_KEYMAP_PATH)/keymap.c
 SUBPROJ_KEYMAP_PATH := $(SUBPROJECT_PATH)/keymaps/$(KEYMAP)
 SUBPROJ_KEYMAP_C := $(SUBPROJ_KEYMAP_PATH)/keymap.c
 ifneq ("$(wildcard $(SUBPROJ_KEYMAP_C))","")
-    -include $(SUBPROJ_KEYMAP_PATH)/Makefile
+    -include $(SUBPROJ_KEYMAP_PATH)/rules.mk
     KEYMAP_C := $(SUBPROJ_KEYMAP_C)
     KEYMAP_PATH := $(SUBPROJ_KEYMAP_PATH)
 else ifneq ("$(wildcard $(MAIN_KEYMAP_C))","")
-    -include $(MAIN_KEYMAP_PATH)/Makefile
+    -include $(MAIN_KEYMAP_PATH)/rules.mk
     KEYMAP_C := $(MAIN_KEYMAP_C)
     KEYMAP_PATH := $(MAIN_KEYMAP_PATH)
 else ifneq ($(LAYOUTS),)
@@ -181,4 +181,3 @@ build: elf hex
 
 
 include $(TMK_PATH)/rules.mk
-

docs/feature_common_shortcuts.md

@@ -92,7 +92,7 @@ The following shortcuts automatically add `LSFT()` to keycodes to get commonly u
 | KC_RCBR | } |
 | KC_LABK | < |
 | KC_RABK | > |
-| KC_PIPE | | |
+| KC_PIPE | &#x7C; |
 | KC_COLN | : |
 
 ## Mod Tap

docs/feature_rgblight.md

@@ -1,8 +1,107 @@
 # RGB Lighting
 
-<!-- FIXME: Describe how to use RGB Lighting here. -->
+If you've installed addressable RGB lights on your keyboard you can control them with QMK. Currently we support the following addressable LEDs on Atmel AVR processors:
 
-## RGB Under Glow Mod
+* WS2811 and variants (WS2812, WS2812B, WS2812C, etc)
+* SK6812RGBW
+
+Some keyboards come with RGB LEDs pre-installed. Others have to have LEDs installed after the fact. See below for information on modifying your keyboard.
+
+## Selecting Colors
+
+QMK uses Hue, Saturation, and Value to set color rather than using RGB. You can use the color wheel below to see how this works. Changing the Hue will cycle around the circle. Saturation will affect the intensity of the color, which you can see as you move from the inner part to the outer part of the wheel. Value sets the overall brightness.
+
+![gitbook/images/color-wheel.svg]
+
+If you would like to learn more about HSV you can start with the [wikipedia article](https://en.wikipedia.org/wiki/HSL_and_HSV).
+
+## Configuration
+
+Before RGB Lighting can be used you have to enable it in `rules.mk`:
+
+    RGBLIGHT_ENABLE = yes
+
+You can configure the behavior of the RGB lighting by defining values inside `config.h`. 
+
+### Required Configuration
+
+At minimum you have to define the pin your LED strip is connected to and the number of LEDs connected. 
+
+```c
+#define RGB_DI_PIN D7     // The pin the LED strip is connected to
+#define RGBLED_NUM 14     // Number of LEDs in your strip
+```
+
+### Optional Configuration
+
+You can change the behavior of the RGB Lighting by setting these configuration values. Use `#define <Option> <Value>` in a `config.h` at the keyboard, revision, or keymap level.
+
+| Option | Default Value | Description |
+|--------|---------------|-------------|
+| `RGBLIGHT_HUE_STEP` | 10 | How many hues you want to have available. |
+| `RGBLIGHT_SAT_STEP` | 17 | How many steps of saturation you'd like. |
+| `RGBLIGHT_VAL_STEP` | 17 | The number of levels of brightness you want. |
+
+### Animations
+
+If you have `#define RGBLIGHT_ANIMATIONS` in your `config.h` you will have a number of animation modes you can cycle through using the `RGB_MOD` key. You can also `#define` other options to tweak certain animations.
+
+| Option | Default Value | Description |
+|--------|---------------|-------------|
+| `RGBLIGHT_ANIMATIONS` | | `#define` this to enable animation modes. |
+| `RGBLIGHT_EFFECT_SNAKE_LENGTH` | 4 | The number of LEDs to light up for the "snake" mode. |
+| `RGBLIGHT_EFFECT_KNIGHT_LENGTH` | 3 | The number of LEDs to light up for the "knight" mode. |
+| `RGBLIGHT_EFFECT_KNIGHT_OFFSET` | 0 | Start the knight animation this many LEDs from the start of the strip. |
+| `RGBLIGHT_EFFECT_KNIGHT_LED_NUM` | RGBLED_NUM | The number of LEDs to have the "knight" animation travel. |
+| `RGBLIGHT_EFFECT_CHRISTMAS_INTERVAL` | 1000 | How long to wait between light changes for the "christmas" animation. Specified in ms. |
+| `RGBLIGHT_EFFECT_CHRISTMAS_STEP` | 2 | How many LED's to group the red/green colors by for the christmas mode. |
+
+You can also tweak the behavior of the animations by defining these consts in your `keymap.c`. These mostly affect the speed different modes animate at.
+
+```c
+// How long (in ms) to wait between animation steps for the breathing mode
+const uint8_t RGBLED_BREATHING_INTERVALS[] PROGMEM = {30, 20, 10, 5};
+
+// How long (in ms) to wait between animation steps for the rainbow mode
+const uint8_t RGBLED_RAINBOW_MOOD_INTERVALS[] PROGMEM = {120, 60, 30};
+
+// How long (in ms) to wait between animation steps for the swirl mode
+const uint8_t RGBLED_RAINBOW_SWIRL_INTERVALS[] PROGMEM = {100, 50, 20};
+
+// How long (in ms) to wait between animation steps for the snake mode
+const uint8_t RGBLED_SNAKE_INTERVALS[] PROGMEM = {100, 50, 20};
+
+// How long (in ms) to wait between animation steps for the knight modes
+const uint8_t RGBLED_KNIGHT_INTERVALS[] PROGMEM = {127, 63, 31};
+
+// These control which colors are selected for the gradient mode
+const uint16_t RGBLED_GRADIENT_RANGES[] PROGMEM = {360, 240, 180, 120, 90};
+```
+
+## RGB Lighting Keycodes
+
+These control the RGB Lighting functionality.
+
+| Long Name | Short Name | Description |
+|-----------|------------|-------------|
+||`RGB_TOG`|toggle on/off|
+||`RGB_MOD`|cycle through modes|
+||`RGB_HUI`|hue increase|
+||`RGB_HUD`|hue decrease|
+||`RGB_SAI`|saturation increase|
+||`RGB_SAD`|saturation decrease|
+||`RGB_VAI`|value (brightness) increase|
+||`RGB_VAD`|value (brightness) decrease|
+|`RGB_MODE_PLAIN`|`RGB_M_P `| Switch to the static no animation mode |
+|`RGB_MODE_BREATHE`|`RGB_M_B`| Switch to the breathing mode |
+|`RGB_MODE_RAINBOW`|`RGB_M_R`| Switch to the rainbow mode ||
+|`RGB_MODE_SWIRL`|`RGB_M_SW`| Switch to the swirl mode |
+|`RGB_MODE_SNAKE`|`RGB_M_SN`| Switch to the snake mode |
+|`RGB_MODE_KNIGHT`|`RGB_M_K`| Switch to the knight animation |
+|`RGB_MODE_XMAS`|`RGB_M_X`| Switch to the Christmas animation |
+|`RGB_MODE_GRADIENT`|`RGB_M_G`| Switch to the static gradient mode |
+
+## Hardware Modification
 
 ![Planck with RGB Underglow](https://raw.githubusercontent.com/qmk/qmk_firmware/master/keyboards/planck/keymaps/yang/planck-with-rgb-underglow.jpg)
 
@@ -17,33 +116,6 @@ In order to use the underglow animation functions, you need to have `#define RGB
 Please add the following options into your config.h, and set them up according your hardware configuration. These settings are for the `F4` pin by default:
 
     #define RGB_DI_PIN F4     // The pin your RGB strip is wired to
-    #define RGBLIGHT_ANIMATIONS    // Require for fancier stuff (not compatible with audio)
     #define RGBLED_NUM 14     // Number of LEDs
-    #define RGBLIGHT_HUE_STEP 10
-    #define RGBLIGHT_SAT_STEP 17
-    #define RGBLIGHT_VAL_STEP 17
 
 You'll need to edit `RGB_DI_PIN` to the pin you have your `DI` on your RGB strip wired to.
-
-The firmware supports 5 different light effects, and the color (hue, saturation, brightness) can be customized in most effects. To control the underglow, you need to modify your keymap file to assign those functions to some keys/key combinations. For details, please check this keymap. `keyboards/planck/keymaps/yang/keymap.c`
-
-### WS2812 Wiring
-
-![WS2812 Wiring](https://raw.githubusercontent.com/qmk/qmk_firmware/master/keyboards/planck/keymaps/yang/WS2812-wiring.jpg)
-
-Please note the USB port can only supply a limited amount of power to the keyboard (500mA by standard, however, modern computer and most usb hubs can provide 700+mA.). According to the data of NeoPixel from Adafruit, 30 WS2812 LEDs require a 5V 1A power supply, LEDs used in this mod should not more than 20.
-
-## RGB Lighting Keycodes
-
-This controls the RGB Lighting functionality. Most keyboards use WS2812 (and compatible) LEDs for underlight or case lighting.
-
-|Name|Description|
-|----|-----------|
-|`RGB_TOG`|toggle on/off|
-|`RGB_MOD`|cycle through modes|
-|`RGB_HUI`|hue increase|
-|`RGB_HUD`|hue decrease|
-|`RGB_SAI`|saturation increase|
-|`RGB_SAD`|saturation decrease|
-|`RGB_VAI`|value increase|
-|`RGB_VAD`|value decrease|

docs/getting_started_build_tools.md

@@ -40,8 +40,11 @@ Debian/Ubuntu example:
 If you're using [homebrew,](http://brew.sh/) you can use the following commands:
 
     brew tap osx-cross/avr
-    brew install avr-libc
+    brew tap PX4/homebrew-px4
+    brew update
+    brew install avr-gcc
     brew install dfu-programmer
+    brew install gcc-arm-none-eabi
 
 This is the recommended method. If you don't have homebrew, [install it!](http://brew.sh/) It's very much worth it for anyone who works in the command line. Note that the `make` and `make install` portion during the homebrew installation of avr-libc can take over 20 minutes and exhibit high CPU usage.
 

docs/getting_started_make_guide.md

@@ -1,8 +1,6 @@
 # More detailed make instruction
 
-The full syntax of the `make` command is the following, but parts of the command can be left out if you run it from other directories than the `root` (as you might already have noticed by reading the simple instructions).
-
-`<keyboard>-<subproject>-<keymap>-<target>`, where:
+The full syntax of the `make` command is `<keyboard>-<subproject>-<keymap>-<target>`, where:
 
 * `<keyboard>` is the name of the keyboard, for example `planck`
   * Use `allkb` to compile all keyboards
@@ -14,24 +12,13 @@ The full syntax of the `make` command is the following, but parts of the command
   * Use `allkm` to compile all keymaps
 * `<target>` will be explained in more detail below.
 
-**Note:** When you leave some parts of the command out, you should also remove the dash (`-`).
-
-As mentioned above, there are some shortcuts, when you are in a:
-
-* `keyboard` folder, the command will automatically fill the `<keyboard>` part. So you only need to type `<subproject>-<keymap>-<target>`
-* `subproject` folder, it will fill in both `<keyboard>` and `<subproject>`
-* `keymap` folder, then `<keyboard>` and `<keymap>` will be filled in. If you need to specify the `<subproject>` use the following syntax `<subproject>-<target>`
-  * Note in order to support this shortcut, the keymap needs its own Makefile
-* `keymap` folder of a `subproject`, then everything except the `<target>` will be filled in
-
 The `<target>` means the following
 * If no target is given, then it's the same as `all` below
-* `all` compiles the keyboard and generates a `<keyboard>_<keymap>.hex` file in whichever folder you run `make` from. These files are ignored by git, so don't worry about deleting them when committing/creating pull requests.
-* `dfu`, `teensy` or `dfu-util`, compile and upload the firmware to the keyboard. If the compilation fails, then nothing will be uploaded. The programmer to use depends on the keyboard. For most keyboards it's `dfu`, but for Infinity keyboards you should use `dfu-util`, and `teensy` for standard Teensys. To find out which command you should use for your keyboard, check the keyboard specific readme. **Note** that some operating systems needs root access for these commands to work, so in that case you need to run for example `sudo make dfu`.
+* `all` compiles as many keyboard/revision/keymap combinations as specified. For example, `make planck-rev4-default-all` will generate a single .hex, while `make planck-rev-all` will generate a hex for every keymap available to the planck.
+* `dfu`, `teensy` or `dfu-util`, compile and upload the firmware to the keyboard. If the compilation fails, then nothing will be uploaded. The programmer to use depends on the keyboard. For most keyboards it's `dfu`, but for ChibiOS keyboards you should use `dfu-util`, and `teensy` for standard Teensys. To find out which command you should use for your keyboard, check the keyboard specific readme. 
+ * **Note**: some operating systems need root access for these commands to work, so in that case you need to run for example `sudo make planck-rev4-default-dfu`.
 * `clean`, cleans the build output folders to make sure that everything is built from scratch. Run this before normal compilation if you have some unexplainable problems.
 
-Some other targets are supported but, but not important enough to be documented here. Check the source code of the make files for more information.
-
 You can also add extra options at the end of the make command line, after the target
 
 * `make COLOR=false` - turns off color output
@@ -44,25 +31,10 @@ The make command itself also has some additional options, type `make --help` for
 Here are some examples commands
 
 * `make allkb-allsp-allkm` builds everything (all keyboards, all subprojects, all keymaps). Running just `make` from the `root` will also run this.
-* `make` from within a `keyboard` directory, is the same as `make keyboard-allsp-allkm`, which compiles all subprojects and keymaps of the keyboard. **NOTE** that this behaviour has changed. Previously it compiled just the default keymap.
-* `make ergodox-infinity-algernon-clean` will clean the build output of the Ergodox Infinity keyboard. This example uses the full syntax and can be run from any folder with a `Makefile`
-* `make dfu COLOR=false` from within a keymap folder, builds and uploads the keymap, but without color output.
+* `make ergodox-infinity-algernon-clean` will clean the build output of the Ergodox Infinity keyboard. 
+* `make planck-rev4-default-dfu COLOR=false` builds and uploads the keymap without color output.
 
-# The `Makefile`
-
-There are 5 different `make` and `Makefile` locations:
-
-* root (`/`)
-* keyboard (`/keyboards/<keyboard>/`)
-* keymap (`/keyboards/<keyboard>/keymaps/<keymap>/`)
-* subproject (`/keyboards/<keyboard>/<subproject>`)
-* subproject keymap (`/keyboards/<keyboard>/<subproject>/keymaps/<keymap>`)
-
-The root contains the code used to automatically figure out which keymap or keymaps to compile based on your current directory and commandline arguments. It's considered stable, and shouldn't be modified. The keyboard one will contain the MCU set-up and default settings for your keyboard, and shouldn't be modified unless you are the producer of that keyboard. The keymap Makefile can be modified by users, and is optional. It is included automatically if it exists. You can see an example [here](https://github.com/qmk/qmk_firmware/blob/master/doc/keymap_makefile_example.mk) - the last few lines are the most important. The settings you set here will override any defaults set in the keyboard Makefile. **The file is required if you want to run `make` in the keymap folder.**
-
-For keyboards and subprojects, the make files are split in two parts `Makefile` and `rules.mk`. All settings can be found in the `rules.mk` file, while the `Makefile` is just there for support and including the root `Makefile`. Keymaps contain just one `Makefile` for simplicity.
-
-## Makefile options
+## `rules.mk` options
 
 Set these variables to `no` to disable them, and `yes` to enable them.
 
@@ -164,8 +136,6 @@ This enables [key lock](key_lock.md). This consumes an additional 260 bytes.
 
 ## Customizing Makefile options on a per-keymap basis
 
-If your keymap directory has a file called `Makefile` (note the filename), any Makefile options you set in that file will take precedence over other Makefile options for your particular keyboard.
+If your keymap directory has a file called `rules.mk` any options you set in that file will take precedence over other `rules.mk` options for your particular keyboard.
 
-So let's say your keyboard's makefile has `BACKLIGHT_ENABLE = yes` (or maybe doesn't even list the `BACKLIGHT_ENABLE` option, which would cause it to be off). You want your particular keymap to not have the debug console, so you make a file called `Makefile` and specify `BACKLIGHT_ENABLE = no`.
-
-You can use the `docs/keymap_makefile_example.md` as a template/starting point.
+So let's say your keyboard's `rules.mk` has `BACKLIGHT_ENABLE = yes`. You want your particular keyboard to not have the backlight, so you make a file called `rules.mk` and specify `BACKLIGHT_ENABLE = no`.

docs/gitbook/images/color-wheel.svg

@@ -0,0 +1,441 @@
+<?xml version="1.0" encoding="UTF-8" standalone="no"?>
+<!-- Generator: Adobe Illustrator 15.1.0, SVG Export Plug-In . SVG Version: 6.00 Build 0)  -->
+<svg
+    xmlns:inkscape="http://www.inkscape.org/namespaces/inkscape"
+    xmlns:rdf="http://www.w3.org/1999/02/22-rdf-syntax-ns#"
+    xmlns="http://www.w3.org/2000/svg"
+    xmlns:dc="http://purl.org/dc/elements/1.1/"
+    xmlns:ns1="http://sozi.baierouge.fr"
+    xmlns:cc="http://web.resource.org/cc/"
+    xmlns:xlink="http://www.w3.org/1999/xlink"
+    xmlns:sodipodi="http://sodipodi.sourceforge.net/DTD/sodipodi-0.dtd"
+    id="Layer_1"
+    enable-background="new 0 0 360 360"
+    xml:space="preserve"
+    viewBox="0 0 360 360"
+    version="1.1"
+    y="0px"
+    x="0px"
+  >
+<g
+    >
+</g
+  >
+<g
+    >
+	<g
+      >
+		<path
+          d="m193.8 167.46l113.52-113.89c-23.457-23.36-50.2-38.727-82.193-47.23l-41.313 155.45c3.15 0.84 7.66 3.37 9.98 5.67z"
+          fill="#E0C3D3"
+      />
+		<path
+          d="m209.95 151.26l97.367-97.688c-23.457-23.36-50.2-38.727-82.193-47.23l-35.43 133.29c7.71 1.86 14.76 5.91 20.25 11.63z"
+          fill="#E0A0C3"
+      />
+		<path
+          d="m225.94 135.21l81.375-81.643c-23.457-23.36-50.2-38.727-82.193-47.23l-29.61 111.4c11.55 2.89 22.11 8.95 30.42 17.47z"
+          fill="#E080B5"
+      />
+		<path
+          d="m241.95 119.15l65.369-65.585c-23.457-23.36-50.2-38.727-82.193-47.23l-23.784 89.491c15.38 3.919 29.46 12.004 40.6 23.324z"
+          fill="#E061A7"
+      />
+		<path
+          d="m257.95 103.1l49.371-49.533c-23.457-23.36-50.2-38.727-82.193-47.23l-17.962 67.589c19.22 4.944 36.82 15.052 50.78 29.174z"
+          fill="#E04198"
+      />
+		<path
+          d="m273.95 87.05l33.373-33.482c-23.457-23.36-50.2-38.727-82.193-47.23l-12.142 45.687c23.07 5.968 44.18 18.099 60.96 35.025z"
+          fill="#E0228B"
+      />
+		<path
+          d="m289.94 70.999l17.375-17.431c-23.457-23.36-50.2-38.728-82.193-47.231l-6.321 23.784c26.91 6.994 51.54 21.148 71.13 40.878z"
+          fill="#E10071"
+      />
+	</g
+    >
+	<g
+      >
+		<path
+          d="m174.73 162.13c2.934-0.792 6.094-0.876 8.876-0.292l41-155.36c-31.994-8.502-61.625-8.332-93.483 0.274l42.101 155.85c-0.01-0.02 1.13-0.37 1.5-0.47z"
+          fill="#FFD9D9"
+      />
+		<path
+          d="m168.93 139.99c6.926-1.871 14.036-1.906 20.556-0.349l35.12-133.16c-31.994-8.502-61.625-8.332-93.483 0.274l36.127 133.73c0.95-0.27 1.19-0.36 1.67-0.49z"
+          fill="#FFB6B6"
+      />
+		<path
+          d="m163.03 118.12c10.904-2.946 22.03-2.917 32.267-0.373l29.31-111.27c-31.994-8.502-61.625-8.332-93.483 0.274l30.218 111.86c0.96-0.27 1.19-0.36 1.68-0.49z"
+          fill="#FF8F8F"
+      />
+		<path
+          d="m157.12 96.243c14.884-4.021 30.029-3.944 43.982-0.413l23.51-89.354c-31.994-8.502-61.625-8.332-93.483 0.274l24.304 89.968c0.96-0.268 1.2-0.344 1.69-0.475z"
+          fill="#FF6E6E"
+      />
+		<path
+          d="m151.21 74.369c18.863-5.096 38.024-4.964 55.695-0.446l17.71-67.447c-31.994-8.502-61.625-8.332-93.483 0.274l18.395 68.094c0.96-0.267 1.2-0.344 1.69-0.475z"
+          fill="#FF4848"
+      />
+		<path
+          d="m145.06 52.56c22.919-6.191 46.298-6.016 67.745-0.456l11.81-45.628c-31.994-8.502-61.625-8.332-93.483 0.274l12.484 46.214c0.97-0.263 1.13-0.317 1.45-0.404z"
+          fill="#FF2424"
+      />
+		<path
+          d="m139.15 30.685c26.906-7.269 54.312-7.036 79.48-0.483l5.978-23.726c-31.994-8.502-61.625-8.332-93.483 0.274l6.575 24.34c0.97-0.262 1.13-0.318 1.45-0.405z"
+          fill="#FF0000"
+      />
+	</g
+    >
+	<g
+      >
+		<path
+          d="m173.23 162.6l-42.1-155.85c-31.858 8.606-56.824 23.185-80.185 46.64l114.57 114.36c2.08-2.33 4.86-4.17 7.71-5.15z"
+          fill="#FFEBD9"
+      />
+		<path
+          d="m167.25 140.48l-36.12-133.73c-31.858 8.606-56.824 23.185-80.185 46.64l98.442 98.288c4.77-5.09 11.17-9.11 17.86-11.2z"
+          fill="#FFD7B3"
+      />
+		<path
+          d="m161.34 118.61l-30.21-111.86c-31.858 8.606-56.824 23.185-80.185 46.64l82.386 82.283c7.49-7.82 17.47-13.93 28.01-17.06z"
+          fill="#FFC48F"
+      />
+		<path
+          d="m155.43 96.719l-24.3-89.969c-31.858 8.606-56.824 23.185-80.185 46.64l66.336 66.282c10.2-10.55 23.74-18.78 38.15-22.951z"
+          fill="#FFB26C"
+      />
+		<path
+          d="m149.52 74.845l-18.39-68.095c-31.858 8.606-56.824 23.185-80.185 46.64l50.287 50.283c12.91-13.273 30.02-23.612 48.29-28.825z"
+          fill="#FF9F48"
+      />
+		<path
+          d="m143.61 52.964l-12.48-46.214c-31.858 8.606-56.824 23.185-80.185 46.64l34.05 34.204c15.705-16.028 35.495-28.198 58.615-34.63z"
+          fill="#FF8C24"
+      />
+		<path
+          d="m137.7 31.091l-6.575-24.34c-31.858 8.606-56.824 23.185-80.185 46.64l17.99 18.216c18.435-18.762 41.795-33.041 68.775-40.516z"
+          fill="#FF8000"
+      />
+	</g
+    >
+	<g
+      >
+		<path
+          d="m166.24 167.56l-114.82-114.3c-23.36 23.457-36.884 48.514-45.386 80.507l155.98 41.453c0.85-3.15 1.92-5.35 4.23-7.66z"
+          fill="#FFFED9"
+      />
+		<path
+          d="m149.96 151.35l-98.535-98.09c-23.36 23.457-36.884 48.514-45.386 80.507l133.85 35.573c1.8-6.74 5.26-12.94 10.07-17.99z"
+          fill="#FFFDB3"
+      />
+		<path
+          d="m133.9 135.37l-82.475-82.11c-23.36 23.457-36.884 48.514-45.386 80.507l111.95 29.753c2.82-10.58 8.31-20.29 15.91-28.15z"
+          fill="#FFFC8F"
+      />
+		<path
+          d="m117.84 119.37l-66.415-66.11c-23.36 23.457-36.884 48.514-45.386 80.507l90.037 23.929c3.845-14.42 11.364-27.64 21.764-38.33z"
+          fill="#FFFB6C"
+      />
+		<path
+          d="m101.78 103.39l-50.355-50.13c-23.36 23.457-36.884 48.514-45.386 80.507l68.136 18.108c4.869-18.26 14.403-34.99 27.605-48.49z"
+          fill="#FFFA48"
+      />
+		<path
+          d="m85.716 87.398l-34.291-34.138c-23.36 23.457-36.884 48.514-45.386 80.507l46.235 12.288c5.893-22.09 17.445-42.34 33.442-58.662z"
+          fill="#FFF924"
+      />
+		<path
+          d="m69.657 71.411l-18.232-18.151c-23.36 23.457-36.884 48.514-45.386 80.507l24.334 6.468c6.917-25.93 20.488-49.694 39.284-68.829z"
+          fill="#FFFF00"
+      />
+	</g
+    >
+	<g
+      >
+		<path
+          d="m162.13 185.27c-0.792-2.934-0.647-7.06-0.061-9.842l-155.89-41.15c-8.503 31.994-8.034 62.733 0.572 94.591l155.85-42.1c-0.02 0.01-0.37-1.13-0.47-1.5z"
+          fill="#EBFFD9"
+      />
+		<path
+          d="m139.99 191.07c-1.963-7.268-1.891-14.725-0.095-21.517l-133.72-35.27c-8.503 31.994-8.034 62.733 0.572 94.591l133.73-36.127c-0.27-0.96-0.36-1.19-0.49-1.67z"
+          fill="#D8FFB6"
+      />
+		<path
+          d="m118.12 196.98c-3.039-11.249-2.905-22.722-0.121-33.231l-111.82-29.47c-8.503 31.994-8.034 62.733 0.572 94.591l111.86-30.218c-0.27-0.96-0.36-1.19-0.49-1.67z"
+          fill="#C5FF92"
+      />
+		<path
+          d="m96.244 202.89c-4.114-15.228-3.942-30.725-0.169-44.949l-89.897-23.66c-8.503 31.994-8.034 62.733 0.572 94.591l89.968-24.304c-0.268-0.97-0.343-1.2-0.474-1.68z"
+          fill="#B1FF6C"
+      />
+		<path
+          d="m74.371 208.8c-5.189-19.208-4.962-38.724-0.201-56.666l-67.992-17.85c-8.503 31.994-8.034 62.733 0.572 94.591l68.094-18.395c-0.267-0.96-0.343-1.2-0.473-1.68z"
+          fill="#9DFF48"
+      />
+		<path
+          d="m52.563 214.95c-6.285-23.265-6.011-46.996-0.205-68.714l-46.18-11.96c-8.503 31.994-8.034 62.733 0.572 94.591l46.214-12.484c-0.263-0.97-0.315-1.12-0.401-1.44z"
+          fill="#8AFF24"
+      />
+		<path
+          d="m30.688 220.86c-7.362-27.251-7.029-55.011-0.229-80.452l-24.28-6.125c-8.503 31.994-8.034 62.733 0.572 94.591l24.34-6.575c-0.264-0.97-0.317-1.12-0.403-1.44z"
+          fill="#71FF00"
+      />
+	</g
+    >
+	<g
+      >
+		<path
+          d="m162.6 186.77l-155.85 42.1c8.606 31.857 23.185 56.824 46.641 80.185l114.36-114.57c-2.33-2.09-4.17-4.87-5.15-7.72z"
+          fill="#DCFFDC"
+      />
+		<path
+          d="m140.48 192.75l-133.73 36.12c8.606 31.857 23.185 56.824 46.641 80.185l98.286-98.442c-5.1-4.78-9.11-11.18-11.2-17.87z"
+          fill="#B6FFB6"
+      />
+		<path
+          d="m118.61 198.66l-111.86 30.21c8.606 31.857 23.185 56.824 46.641 80.185l82.281-82.387c-7.82-7.49-13.93-17.47-17.06-28.01z"
+          fill="#92FF92"
+      />
+		<path
+          d="m96.719 204.57l-89.969 24.3c8.606 31.857 23.185 56.824 46.641 80.185l66.28-66.336c-10.55-10.2-18.78-23.74-22.951-38.15z"
+          fill="#6EFF6E"
+      />
+		<path
+          d="m74.845 210.48l-68.095 18.39c8.606 31.857 23.185 56.824 46.641 80.185l50.281-50.287c-13.274-12.92-23.614-30.02-28.825-48.29z"
+          fill="#4AFF4A"
+      />
+		<path
+          d="m52.964 216.39l-46.214 12.48c8.606 31.857 23.185 56.824 46.641 80.185l34.202-34.049c-16.028-15.71-28.198-35.5-34.629-58.62z"
+          fill="#27FF27"
+      />
+		<path
+          d="m31.091 222.3l-24.34 6.575c8.606 31.857 23.185 56.824 46.641 80.185l18.214-17.989c-18.763-18.43-33.043-41.79-40.515-68.77z"
+          fill="#00FF00"
+      />
+	</g
+    >
+	<g
+      >
+		<path
+          d="m167.59 193.87l-114.31 114.78c23.455 23.359 47.388 37.112 79.381 45.616l41.606-156.55c-3.16-0.85-4.37-1.55-6.68-3.85z"
+          fill="#DCFFED"
+      />
+		<path
+          d="m151.42 210.11l-98.14 98.54c23.455 23.359 47.388 37.112 79.381 45.616l35.721-134.41c-6.34-1.86-12.17-5.21-16.96-9.75z"
+          fill="#B6FFD9"
+      />
+		<path
+          d="m135.43 226.16l-82.15 82.49c23.455 23.359 47.388 37.112 79.381 45.616l29.9-112.51c-10.18-2.89-19.52-8.26-27.13-15.6z"
+          fill="#92FFC6"
+      />
+		<path
+          d="m119.43 242.22l-66.15 66.43c23.456 23.359 47.388 37.112 79.381 45.616l24.079-90.603c-14.02-3.92-26.87-11.31-37.31-21.45z"
+          fill="#6EFFB3"
+      />
+		<path
+          d="m103.44 258.28l-50.16 50.37c23.455 23.359 47.388 37.112 79.381 45.616l18.258-68.701c-17.86-4.95-34.22-14.35-47.48-27.29z"
+          fill="#4AFFA0"
+      />
+		<path
+          d="m87.451 274.34l-34.17 34.31c23.455 23.359 47.388 37.112 79.381 45.616l12.438-46.801c-21.69-5.97-41.58-17.4-57.649-33.13z"
+          fill="#27FF8D"
+      />
+		<path
+          d="m71.459 290.39l-18.179 18.26c23.455 23.359 47.388 37.112 79.381 45.616l6.618-24.9c-25.53-6.99-48.93-20.44-67.821-38.98z"
+          fill="#00FF80"
+      />
+	</g
+    >
+	<g
+      >
+		<path
+          d="m173.85 197.82l-41.812 156.61c31.993 8.501 61.11 8.47 92.969-0.136l-42.101-155.85c-2.95 0.59-6.08 0.35-9.06-0.62z"
+          fill="#DCFFFE"
+      />
+		<path
+          d="m167.98 219.87l-35.941 134.56c31.993 8.501 61.11 8.47 92.969-0.136l-36.127-133.73c-6.82 1.57-14.22 1.29-20.9-0.69z"
+          fill="#B6FFFD"
+      />
+		<path
+          d="m162.15 241.77l-30.107 112.65c31.993 8.501 61.11 8.47 92.969-0.136l-30.219-111.86c-10.69 2.62-22.24 2.33-32.64-0.65z"
+          fill="#92FFFC"
+      />
+		<path
+          d="m156.32 263.68l-24.276 90.754c31.993 8.501 61.11 8.47 92.969-0.136l-24.305-89.969c-14.54 3.66-30.26 3.33-44.38-0.64z"
+          fill="#6EFFFB"
+      />
+		<path
+          d="m150.49 285.57l-18.446 68.856c31.993 8.501 61.11 8.47 92.969-0.136l-18.396-68.095c-18.41 4.7-38.28 4.34-56.12-0.63z"
+          fill="#4AFFFA"
+      />
+		<path
+          d="m144.7 307.61l-12.655 46.815c31.993 8.501 61.11 8.47 92.969-0.136l-12.484-46.215c-23.22 6.1-46.19 5.49-67.83-0.45z"
+          fill="#27FFF9"
+      />
+		<path
+          d="m138.88 329.52l-6.839 24.913c31.994 8.501 61.11 8.47 92.969-0.136l-6.575-24.341c-27.08 7.13-54.2 6.49-79.56-0.43z"
+          fill="#00FFFF"
+      />
+	</g
+    >
+	<g
+      >
+		<path
+          d="m192.47 193.82c-2.109 1.906-5.088 3.48-8.022 4.273-0.373 0.101-1.527 0.377-1.533 0.354l42.101 155.85c31.857-8.606 57.647-23.407 81.009-46.862l-113.56-113.61z"
+          fill="#DCEFFF"
+      />
+		<path
+          d="m208.69 210.01c-4.857 4.652-11.156 8.255-18.107 10.133-0.485 0.131-0.729 0.176-1.699 0.42l36.127 133.73c31.857-8.606 57.647-23.407 81.009-46.862l-97.33-97.42z"
+          fill="#B6DEFF"
+      />
+		<path
+          d="m224.73 226.01c-7.572 7.374-17.307 13.052-28.233 16.004-0.486 0.131-0.732 0.17-1.701 0.42l30.219 111.86c31.857-8.606 57.647-23.407 81.009-46.862l-81.3-81.42z"
+          fill="#92CEFF"
+      />
+		<path
+          d="m240.78 242.02c-10.285 10.097-23.467 17.838-38.372 21.864-0.484 0.131-0.729 0.186-1.696 0.438l24.305 89.969c31.857-8.606 57.647-23.407 81.009-46.862l-65.25-65.41z"
+          fill="#6EBEFF"
+      />
+		<path
+          d="m208.31 285.76c-0.485 0.132-0.731 0.185-1.698 0.439l18.396 68.095c31.857-8.606 57.647-23.407 81.009-46.862l-49.444-49.336c-13 12.81-29.38 22.56-48.27 27.66z"
+          fill="#4AADFF"
+      />
+		<path
+          d="m213.98 307.7c-0.324 0.088-0.49 0.122-1.456 0.38l12.484 46.215c31.857-8.606 57.647-23.407 81.009-46.862l-33.533-33.371c-15.72 15.59-35.58 27.44-58.5 33.63z"
+          fill="#279EFF"
+      />
+		<path
+          d="m219.89 329.57c-0.325 0.088-0.491 0.121-1.457 0.38l6.575 24.341c31.857-8.606 57.647-23.407 81.009-46.862l-17.47-17.385c-18.43 18.34-41.75 32.27-68.65 39.53z"
+          fill="#0080FF"
+      />
+	</g
+    >
+	<g
+      >
+		<path
+          d="m197.71 185.73c-0.843 3.153-2.941 5.768-5.242 8.083l113.97 113.5c23.359-23.456 39.325-47.987 47.829-79.98l-156.56-41.6z"
+          fill="#DCDCFF"
+      />
+		<path
+          d="m219.85 191.62c-2.041 6.976-5.889 13.329-11.148 18.372l97.727 97.328c23.359-23.456 39.325-47.987 47.829-79.98l-134.41-35.72z"
+          fill="#B6B6FF"
+      />
+		<path
+          d="m241.75 197.44c-3.064 10.814-8.936 20.677-16.995 28.538l81.675 81.342c23.359-23.456 39.325-47.987 47.829-79.98l-112.52-29.9z"
+          fill="#9292FF"
+      />
+		<path
+          d="m263.66 203.26c-4.089 14.652-11.976 28.037-22.837 38.716l65.61 65.343c23.359-23.456 39.325-47.987 47.829-79.98l-90.6-24.08z"
+          fill="#6E6EFF"
+      />
+		<path
+          d="m285.56 209.08c-5.112 18.491-15.019 35.392-28.682 48.887l49.554 49.352c23.359-23.456 39.325-47.987 47.829-79.98l-68.7-18.26z"
+          fill="#4A4AFF"
+      />
+		<path
+          d="m307.46 214.9c-6.137 22.329-18.063 42.745-34.525 59.06l33.496 33.358c23.359-23.456 39.325-47.987 47.829-79.98l-46.81-12.44z"
+          fill="#2727FF"
+      />
+		<path
+          d="m329.36 220.72c-7.161 26.167-21.104 50.1-40.368 69.23l17.438 17.366c23.359-23.456 39.325-47.987 47.829-79.98l-24.9-6.62z"
+          fill="#0000FF"
+      />
+	</g
+    >
+	<g
+      >
+		<path
+          d="m198.44 177.09c0.588 2.949 0.342 6.08-0.624 9.056l156.61 41.813c8.501-31.994 8.47-61.111-0.136-92.969l-155.85 42.1z"
+          fill="#ECDCFF"
+      />
+		<path
+          d="m220.56 171.12c1.57 6.827 1.293 14.228-0.688 20.901l134.56 35.941c8.501-31.994 8.47-61.111-0.136-92.969l-133.73 36.13z"
+          fill="#D8B6FF"
+      />
+		<path
+          d="m242.43 165.21c2.612 10.689 2.32 22.245-0.657 32.643l112.65 30.108c8.501-31.994 8.47-61.111-0.136-92.969l-111.85 30.22z"
+          fill="#C492FF"
+      />
+		<path
+          d="m264.32 159.29c3.655 14.55 3.324 30.265-0.649 44.388l90.754 24.277c8.501-31.994 8.47-61.111-0.136-92.969l-89.96 24.3z"
+          fill="#B16EFF"
+      />
+		<path
+          d="m286.2 153.38c4.699 18.412 4.345 38.281-0.625 56.128l68.855 18.446c8.501-31.994 8.47-61.111-0.136-92.969l-68.1 18.39z"
+          fill="#9E4AFF"
+      />
+		<path
+          d="m308.08 147.47c6.088 23.216 5.471 46.185-0.464 67.83l46.814 12.655c8.501-31.994 8.47-61.111-0.136-92.969l-46.21 12.48z"
+          fill="#8B27FF"
+      />
+		<path
+          d="m329.95 141.56c7.131 27.078 6.49 54.192-0.435 79.554l24.911 6.84c8.501-31.994 8.47-61.111-0.136-92.969l-24.34 6.58z"
+          fill="#8000FF"
+      />
+	</g
+    >
+	<g
+      >
+		<path
+          d="m198.09 175.56c0.101 0.374 0.377 1.528 0.354 1.534l155.85-42.101c-8.606-31.858-23.408-57.649-46.862-81.009l-113.63 113.48c1.9 2.11 3.5 5.16 4.29 8.1z"
+          fill="#FEDCFF"
+      />
+		<path
+          d="m220.14 169.42c0.131 0.486 0.176 0.729 0.42 1.699l133.73-36.126c-8.606-31.858-23.407-57.648-46.862-81.009l-97.479 97.275c4.61 4.84 8.32 11.25 10.19 18.16z"
+          fill="#FDB6FF"
+      />
+		<path
+          d="m242.01 163.51c0.131 0.484 0.169 0.729 0.419 1.697l111.86-30.218c-8.606-31.858-23.408-57.649-46.862-81.009l-81.486 81.231c7.34 7.56 13.13 17.41 16.07 28.3z"
+          fill="#FC92FF"
+      />
+		<path
+          d="m263.89 157.6c0.13 0.484 0.185 0.725 0.438 1.692l89.969-24.304c-8.606-31.858-23.408-57.649-46.862-81.009l-65.48 65.173c10.06 10.28 17.91 23.57 21.93 38.45z"
+          fill="#FB6EFF"
+      />
+		<path
+          d="m285.76 151.69c0.131 0.483 0.183 0.724 0.438 1.69l68.095-18.395c-8.606-31.858-23.408-57.649-46.862-81.009l-49.482 49.121c12.79 13 22.71 29.74 27.8 48.6z"
+          fill="#FA4AFF"
+      />
+		<path
+          d="m307.7 146.03c0.087 0.321 0.12 0.48 0.378 1.447l46.215-12.484c-8.606-31.858-23.408-57.649-46.862-81.009l-33.484 33.07c15.59 15.719 27.55 36.039 33.74 58.969z"
+          fill="#F927FF"
+      />
+		<path
+          d="m329.58 140.12c0.086 0.321 0.118 0.48 0.377 1.446l24.341-6.575c-8.606-31.858-23.52-58.061-46.974-81.421l-17.375 17.432c18.32 18.435 32.35 42.199 39.62 69.109z"
+          fill="#FF00FF"
+      />
+	</g
+    >
+</g
+  >
+<metadata
+    ><rdf:RDF
+      ><cc:Work
+        ><dc:format
+          >image/svg+xml</dc:format
+        ><dc:type
+            rdf:resource="http://purl.org/dc/dcmitype/StillImage"
+        /><cc:license
+            rdf:resource="http://creativecommons.org/licenses/publicdomain/"
+        /><dc:publisher
+          ><cc:Agent
+              rdf:about="http://openclipart.org/"
+            ><dc:title
+              >Openclipart</dc:title
+            ></cc:Agent
+          ></dc:publisher
+        ></cc:Work
+      ><cc:License
+          rdf:about="http://creativecommons.org/licenses/publicdomain/"
+        ><cc:permits
+            rdf:resource="http://creativecommons.org/ns#Reproduction"
+        /><cc:permits
+            rdf:resource="http://creativecommons.org/ns#Distribution"
+        /><cc:permits
+            rdf:resource="http://creativecommons.org/ns#DerivativeWorks"
+        /></cc:License
+      ></rdf:RDF
+    ></metadata
+  ></svg
+>

docs/hand_wire.md

@@ -271,9 +271,9 @@ This would require our `KEYMAP` definition to look like this:
 
 Notice how the `k11` and `KC_NO` switched places to represent the wiring, and the unused final column on the bottom row. Sometimes it'll make more sense to put a keyswitch on a particular column, but in the end, it won't matter, as long as all of them are accounted for. You can use this process to write out the `KEYMAP` for your entire keyboard - be sure to remember that your keyboard is actually backwards when looking at the underside of it.
 
-### keymaps/default.c
+### keymaps/<variant>/default.c
 
-This is the actual keymap for your keyboard, and the main place you'll make changes as you perfect your layout. `default.c` is the file that gets pull by default when typing `make`, but you can make other files as well, and specify them by typing `make KEYMAP=<variant>`, which will pull `keymaps/<variant>.c`.
+This is the actual keymap for your keyboard, and the main place you'll make changes as you perfect your layout. `default.c` is the file that gets pull by default when typing `make`, but you can make other files as well, and specify them by typing `make handwired-<keyboard>-<variant>`, which will pull `keymaps/<variant>/keymap.c`.
 
 The basis of a keymap is its layers - by default, layer 0 is active. You can activate other layers, the highest of which will be referenced first. Let's start with our base layer.
 

keyboards/9key/keymaps/default/rules.mk

@@ -1,4 +1,3 @@
-TAP_DANCE_ENABLE = yes
 ifndef QUANTUM_DIR
 	include ../../../../Makefile
 endif

keyboards/amj40/keymaps/default/rules.mk

@@ -0,0 +1,27 @@
+# Build Options
+#   change to "no" to disable the options, or define them in the Makefile in 
+#   the appropriate keymap folder that will get included automatically
+#
+BOOTMAGIC_ENABLE = no  # Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE  = no  # Mouse keys(+4700)
+EXTRAKEY_ENABLE  = yes # Audio control and System control(+450)
+CONSOLE_ENABLE   = no  # Console for debug(+400)
+COMMAND_ENABLE   = yes # Commands for debug and configuration
+NKRO_ENABLE      = yes # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+BACKLIGHT_ENABLE = yes  # Enable keyboard backlight functionality
+MIDI_ENABLE      = no  # MIDI controls
+AUDIO_ENABLE     = no  # Audio output on port C6
+UNICODE_ENABLE   = no  # Unicode
+BLUETOOTH_ENABLE = no  # Enable Bluetooth with the Adafruit EZ-Key HID
+RGBLIGHT_ENABLE  = yes  # Enable WS2812 RGB underlight.  Do not enable this with audio at the same time.
+
+# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
+SLEEP_LED_ENABLE = no    # Breathing sleep LED during USB suspend
+
+#define ws2812_PORTREG  PORTD
+#define ws2812_DDRREG   DDRD
+
+
+ifndef QUANTUM_DIR
+	include ../../../../Makefile
+endif

keyboards/amj40/keymaps/fabian/rules.mk

@@ -0,0 +1,27 @@
+# Build Options
+#   change to "no" to disable the options, or define them in the Makefile in 
+#   the appropriate keymap folder that will get included automatically
+#
+BOOTMAGIC_ENABLE = no  # Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE  = yes  # Mouse keys(+4700)
+EXTRAKEY_ENABLE  = yes # Audio control and System control(+450)
+CONSOLE_ENABLE   = no  # Console for debug(+400)
+COMMAND_ENABLE   = yes # Commands for debug and configuration
+NKRO_ENABLE      = yes # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+BACKLIGHT_ENABLE = yes  # Enable keyboard backlight functionality
+MIDI_ENABLE      = no  # MIDI controls
+AUDIO_ENABLE     = no  # Audio output on port C6
+UNICODE_ENABLE   = no  # Unicode
+BLUETOOTH_ENABLE = no  # Enable Bluetooth with the Adafruit EZ-Key HID
+RGBLIGHT_ENABLE  = yes  # Enable WS2812 RGB underlight.  Do not enable this with audio at the same time.
+
+# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
+SLEEP_LED_ENABLE = no    # Breathing sleep LED during USB suspend
+
+#define ws2812_PORTREG  PORTD
+#define ws2812_DDRREG   DDRD
+
+
+ifndef QUANTUM_DIR
+	include ../../../../Makefile
+endif

keyboards/amj60/keymaps/iso_split_rshift/rules.mk

@@ -0,0 +1,23 @@
+# Build Options
+#   change to "no" to disable the options, or define them in the Makefile in 
+#   the appropriate keymap folder that will get included automatically
+#
+BOOTMAGIC_ENABLE = no  # Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE  = no  # Mouse keys(+4700)
+EXTRAKEY_ENABLE  = yes # Audio control and System control(+450)
+CONSOLE_ENABLE   = no  # Console for debug(+400)
+COMMAND_ENABLE   = yes # Commands for debug and configuration
+NKRO_ENABLE      = yes # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+BACKLIGHT_ENABLE = no  # Enable keyboard backlight functionality
+MIDI_ENABLE      = no  # MIDI controls
+AUDIO_ENABLE     = no  # Audio output on port C6
+UNICODE_ENABLE   = no  # Unicode
+BLUETOOTH_ENABLE = no  # Enable Bluetooth with the Adafruit EZ-Key HID
+RGBLIGHT_ENABLE  = no  # Enable WS2812 RGB underlight.  Do not enable this with audio at the same time.
+
+# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
+SLEEP_LED_ENABLE = no    # Breathing sleep LED during USB suspend
+
+ifndef QUANTUM_DIR
+	include ../../../../Makefile
+endif

keyboards/atomic/keymaps/pvc/rules.mk

@@ -0,0 +1,15 @@
+BOOTMAGIC_ENABLE = no  # Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE  = yes # Mouse keys(+4700)
+EXTRAKEY_ENABLE  = yes # Audio control and System control(+450)
+CONSOLE_ENABLE   = yes # Console for debug(+400)
+COMMAND_ENABLE   = yes # Commands for debug and configuration
+NKRO_ENABLE      = yes # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality
+MIDI_ENABLE      = no  # MIDI controls
+AUDIO_ENABLE     = yes # Audio output on port C6
+UNICODE_ENABLE   = no  # Unicode
+BLUETOOTH_ENABLE = no  # Enable Bluetooth with the Adafruit EZ-Key HID
+RGBLIGHT_ENABLE  = no  # Enable WS2812 RGB underlight.  Do not enable this with audio at the same time.
+
+# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
+SLEEP_LED_ENABLE = no  # Breathing sleep LED during USB suspend

keyboards/atreus62/keymaps/atreus52/rules.mk

@@ -0,0 +1,4 @@
+NKRO_ENABLE = true
+MOUSEKEY_ENABLE = no
+EXTRAKEY_ENABLE = yes
+CONSOLE_ENABLE = no

keyboards/atreus62/keymaps/mneme/rules.mk

@@ -0,0 +1,5 @@
+TAP_DANCE_ENABLE = yes
+NKRO_ENABLE = true
+MOUSEKEY_ENABLE = no
+EXTRAKEY_ENABLE = yes
+CONSOLE_ENABLE = no

keyboards/bananasplit/keymaps/0010/rules.mk

@@ -0,0 +1,37 @@
+# Copyright 2017 Balz Guenat
+#
+# This program is free software: you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation, either version 2 of the License, or
+# (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program.  If not, see <http://www.gnu.org/licenses/>.
+
+
+# QMK Build Options
+#   change to "no" to disable the options, or define them in the Makefile in 
+#   the appropriate keymap folder that will get included automatically
+#
+# BOOTMAGIC_ENABLE = no       # Virtual DIP switch configuration(+1000)
+# MOUSEKEY_ENABLE = yes       # Mouse keys(+4700)
+# EXTRAKEY_ENABLE = yes       # Audio control and System control(+450)
+# CONSOLE_ENABLE = no         # Console for debug(+400)
+# COMMAND_ENABLE = yes        # Commands for debug and configuration
+# NKRO_ENABLE = yes           # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+# BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality
+# MIDI_ENABLE = no            # MIDI support (+2400 to 4200, depending on config)
+# AUDIO_ENABLE = no           # Audio output on port C6
+# UNICODE_ENABLE = no         # Unicode
+# BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
+# RGBLIGHT_ENABLE = no        # Enable WS2812 RGB underlight.  Do not enable this with audio at the same time.
+# SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
+
+ifndef QUANTUM_DIR
+	include ../../../../Makefile
+endif

keyboards/bananasplit/keymaps/coloneljesus/rules.mk

@@ -0,0 +1,37 @@
+# Copyright 2017 Balz Guenat
+#
+# This program is free software: you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation, either version 2 of the License, or
+# (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program.  If not, see <http://www.gnu.org/licenses/>.
+
+
+# QMK Build Options
+#   change to "no" to disable the options, or define them in the Makefile in 
+#   the appropriate keymap folder that will get included automatically
+#
+# BOOTMAGIC_ENABLE = no       # Virtual DIP switch configuration(+1000)
+# MOUSEKEY_ENABLE = yes       # Mouse keys(+4700)
+# EXTRAKEY_ENABLE = yes       # Audio control and System control(+450)
+# CONSOLE_ENABLE = no         # Console for debug(+400)
+# COMMAND_ENABLE = yes        # Commands for debug and configuration
+# NKRO_ENABLE = yes           # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+# BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality
+# MIDI_ENABLE = no            # MIDI support (+2400 to 4200, depending on config)
+# AUDIO_ENABLE = no           # Audio output on port C6
+# UNICODE_ENABLE = no         # Unicode
+# BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
+# RGBLIGHT_ENABLE = no        # Enable WS2812 RGB underlight.  Do not enable this with audio at the same time.
+# SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
+
+ifndef QUANTUM_DIR
+	include ../../../../Makefile
+endif

keyboards/bananasplit/keymaps/default/rules.mk

@@ -0,0 +1,37 @@
+# Copyright 2017 Balz Guenat
+#
+# This program is free software: you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation, either version 2 of the License, or
+# (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program.  If not, see <http://www.gnu.org/licenses/>.
+
+
+# QMK Build Options
+#   change to "no" to disable the options, or define them in the Makefile in 
+#   the appropriate keymap folder that will get included automatically
+#
+# BOOTMAGIC_ENABLE = no       # Virtual DIP switch configuration(+1000)
+# MOUSEKEY_ENABLE = yes       # Mouse keys(+4700)
+# EXTRAKEY_ENABLE = yes       # Audio control and System control(+450)
+# CONSOLE_ENABLE = no         # Console for debug(+400)
+# COMMAND_ENABLE = yes        # Commands for debug and configuration
+# NKRO_ENABLE = yes           # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+# BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality
+# MIDI_ENABLE = no            # MIDI support (+2400 to 4200, depending on config)
+# AUDIO_ENABLE = no           # Audio output on port C6
+# UNICODE_ENABLE = no         # Unicode
+# BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
+# RGBLIGHT_ENABLE = no        # Enable WS2812 RGB underlight.  Do not enable this with audio at the same time.
+# SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
+
+ifndef QUANTUM_DIR
+	include ../../../../Makefile
+endif

keyboards/chibios_test/subproject.mk

@@ -0,0 +1 @@
+SUBPROJECT_DEFAULT = stm32_f072_onekey

keyboards/clueboard/clueboard.h

@@ -7,6 +7,9 @@
 #ifdef SUBPROJECT_rev2
     #include "rev2.h"
 #endif
+#ifdef SUBPROJECT_rev3
+    #include "rev3.h"
+#endif
 
 #include "quantum.h"
 

keyboards/clueboard/config.h

@@ -67,5 +67,8 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #ifdef SUBPROJECT_rev2
     #include "rev2/config.h"
 #endif
+#ifdef SUBPROJECT_rev3
+    #include "rev3/config.h"
+#endif
 
 #endif

keyboards/clueboard/keymaps/bloodlvst/rules.mk

@@ -0,0 +1,2 @@
+EXTRAKEY_ENABLE = yes
+COMMAND_ENABLE  = no

keyboards/clueboard/keymaps/default/keymap.c

@@ -5,8 +5,6 @@
 
 // Each layer gets a name for readability, which is then used in the keymap matrix below.
 // The underscores don't mean anything - you can have a layer called STUFF or any other name.
-// Layer names don't all need to be of the same length, obviously, and you can also skip them
-// entirely and just use numbers.
 #define _BL 0
 #define _FL 1
 #define _CL 2
@@ -33,7 +31,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
   /* Keymap _CL: Control layer
    */
 [_CL] = KEYMAP(
-  BL_STEP,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,RGB_TOG,        RGB_VAI, \
+  BL_STEP,RGB_M_P,RGB_M_B,RGB_M_R,RGB_M_SW,RGB_M_SN,RGB_M_K,RGB_M_X,RGB_M_G,_______,_______,_______,_______,_______,RGB_TOG,        RGB_VAI, \
   _______,_______,_______,_______,RESET,  _______,_______,_______,_______,_______,_______,_______,_______,_______,                RGB_VAD, \
   _______,_______,MO(_CL),_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,                         \
   MO(_FL),_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,        RGB_SAI,         \

keyboards/clueboard/keymaps/magicmonty/rules.mk

@@ -0,0 +1,9 @@
+
+MOUSEKEY_ENABLE = yes
+EXTRAKEY_ENABLE = yes
+
+MIDI_ENABLE = yes
+
+# if MIDI_ENABLE is set to yes, then CONSOLE_ENABLE has to be disabled, because of the firmware size
+CONSOLE_ENABLE = false
+COMMAND_ENABLE   = no

keyboards/clueboard/keymaps/mouse_keys/rules.mk

@@ -0,0 +1 @@
+MOUSEKEY_ENABLE = yes

keyboards/clueboard/keymaps/serubin/rules.mk

@@ -0,0 +1,4 @@
+
+MOUSEKEY_ENABLE = yes
+EXTRAKEY_ENABLE = yes
+

keyboards/clueboard/keymaps/tetris/rules.mk

@@ -0,0 +1 @@
+SRC = tetris_text.c

keyboards/clueboard/keymaps/xyverz/rules.mk

@@ -0,0 +1,49 @@
+#----------------------------------------------------------------------------
+# On command line:
+#
+# make all = Make software.
+#
+# make clean = Clean out built project files.
+#
+# make coff = Convert ELF to AVR COFF.
+#
+# make extcoff = Convert ELF to AVR Extended COFF.
+#
+# make program = Download the hex file to the device.
+#                Please customize your programmer settings(PROGRAM_CMD)
+#
+# make teensy = Download the hex file to the device, using teensy_loader_cli.
+#               (must have teensy_loader_cli installed).
+#
+# make dfu = Download the hex file to the device, using dfu-programmer (must
+#            have dfu-programmer installed).
+#
+# make flip = Download the hex file to the device, using Atmel FLIP (must
+#             have Atmel FLIP installed).
+#
+# make dfu-ee = Download the eeprom file to the device, using dfu-programmer
+#               (must have dfu-programmer installed).
+#
+# make flip-ee = Download the eeprom file to the device, using Atmel FLIP
+#                (must have Atmel FLIP installed).
+#
+# make debug = Start either simulavr or avarice as specified for debugging,
+#              with avr-gdb or avr-insight as the front end for debugging.
+#
+# make filename.s = Just compile filename.c into the assembler code only.
+#
+# make filename.i = Create a preprocessed source file for use in submitting
+#                   bug reports to the GCC project.
+#
+# To rebuild project do "make clean" then "make all".
+#----------------------------------------------------------------------------
+
+# Build Options
+#   change to "no" to disable the options, or define them in the makefile.mk in 
+#   the appropriate keymap folder that will get included automatically
+#
+RGBLIGHT_ENABLE = yes        # Enable WS2812 RGB underlight.  Do not enable this with audio at the same time.
+
+ifndef QUANTUM_DIR
+	include ../../../../Makefile
+endif

keyboards/clueboard/readme.md

@@ -8,10 +8,11 @@ A fully customizable 66% keyboard.
 * Hardware Supported: Clueboard 66% PCB
   * rev1 (1.0)
   * rev2 (2.0, 2.0.1, 2.1, 2.5, 2.5.1, 2.6)
+  * rev3 (2.7)
 * Hardware Availability: [clueboard.co](https://clueboard.co/)
 
 Make example for this keyboard (after setting up your build environment):
 
-    make cluepad-default
+    make clueboard-rev3-default
 
 See [build environment setup](https://docs.qmk.fm/build_environment_setup.html) then the [make instructions](https://docs.qmk.fm/make_instructions.html) for more information.

keyboards/clueboard/rev2/config.h

@@ -30,10 +30,17 @@
 /* Underlight configuration
  */
 #define RGB_DI_PIN D7
-#define RGBLIGHT_ANIMATIONS
 #define RGBLED_NUM 14     // Number of LEDs
-#define RGBLIGHT_HUE_STEP 10
+#define RGBLIGHT_HUE_STEP 32
 #define RGBLIGHT_SAT_STEP 17
 #define RGBLIGHT_VAL_STEP 17
 
+#define RGBLIGHT_ANIMATIONS
+#define RGBLIGHT_EFFECT_CHRISTMAS_INTERVAL 666*2
+#define RGBLIGHT_EFFECT_CHRISTMAS_STEP 1
+#define RGBLIGHT_EFFECT_KNIGHT_LENGTH 3   // How many LEDs wide to light up
+#define RGBLIGHT_EFFECT_KNIGHT_OFFSET 1   // The led to start at
+#define RGBLIGHT_EFFECT_KNIGHT_LED_NUM 5  // How many LEDs to travel
+#define RGBLIGHT_EFFECT_SNAKE_LENGTH 4    // How many LEDs wide to light up
+
 #endif

keyboards/clueboard/rev3/config.h

@@ -0,0 +1,46 @@
+#ifndef REV3_CONFIG_H
+#define REV3_CONFIG_H
+
+#include "../config.h"
+
+#define PRODUCT_ID      0x2370
+#define DEVICE_VER      0x0001
+
+/* key matrix size */
+#define MATRIX_ROWS 10
+#define MATRIX_COLS 8
+
+// ROWS: Top to bottom, COLS: Left to right
+/* Row pin configuration
+* row: 0  1  2  3  4  5  6  7  8  9
+* pin: B2 C7 C6 B6 B5 B0 B3 D5 D3 D2
+*/
+#define MATRIX_ROW_PINS { B2, C7, C6, B6, B5, B0, B3, D5, D3, D2 }
+/* Column pin configuration
+ * col: 0  1  2  3  4  5  6  7
+ * pin: F0 F1 F4 F5 F6 F7 E6 B1
+ */
+#define MATRIX_COL_PINS { F0, F1, F4, F5, F6, F7, E6, B1 }
+#define UNUSED_PINS
+
+ /* Backlight configuration
+ */
+#define BACKLIGHT_LEVELS 1
+
+/* Underlight configuration
+ */
+#define RGB_DI_PIN D7
+#define RGBLED_NUM 18     // Number of LEDs
+#define RGBLIGHT_HUE_STEP 32
+#define RGBLIGHT_SAT_STEP 17
+#define RGBLIGHT_VAL_STEP 17
+
+#define RGBLIGHT_ANIMATIONS
+#define RGBLIGHT_EFFECT_CHRISTMAS_INTERVAL 666*2
+#define RGBLIGHT_EFFECT_CHRISTMAS_STEP 1
+#define RGBLIGHT_EFFECT_KNIGHT_LENGTH 3   // How many LEDs wide to light up
+#define RGBLIGHT_EFFECT_KNIGHT_OFFSET 2   // The led to start at
+#define RGBLIGHT_EFFECT_KNIGHT_LED_NUM 5  // How many LEDs to travel
+#define RGBLIGHT_EFFECT_SNAKE_LENGTH 4    // How many LEDs wide to light up
+
+#endif

keyboards/clueboard/rev3/rev3.c

@@ -0,0 +1,63 @@
+#include "rev3.h"
+#include <avr/io.h>
+#include "backlight.h"
+#include "print.h"
+
+void matrix_init_kb(void) {
+	// put your keyboard start-up code here
+	// runs once when the firmware starts up
+	matrix_init_user();
+	led_init_ports();
+
+    // JTAG disable for PORT F. write JTD bit twice within four cycles.
+    MCUCR |= (1<<JTD);
+    MCUCR |= (1<<JTD);
+}
+
+
+void matrix_scan_kb(void) {
+    matrix_scan_user();
+}
+
+void backlight_init_ports(void) {
+    print("init_backlight_pin()\n");
+    // Set our LED pins as output
+    DDRD |= (1<<6); // Esc
+    DDRB |= (1<<7); // Page Up
+    DDRD |= (1<<4); // Arrows
+
+    // Set our LED pins low
+    PORTD &= ~(1<<6); // Esc
+    PORTB &= ~(1<<7); // Page Up
+    PORTD &= ~(1<<4); // Arrows
+}
+
+void backlight_set(uint8_t level) {
+    if ( level == 0 ) {
+        // Turn off light
+        PORTD |= (1<<6); // Esc
+        PORTB |= (1<<7); // Page Up
+        PORTD |= (1<<4); // Arrows
+    } else {
+        // Turn on light
+        PORTD &= ~(1<<6); // Esc
+        PORTB &= ~(1<<7); // Page Up
+        PORTD &= ~(1<<4); // Arrows
+    }
+}
+
+void led_init_ports() {
+    // * Set our LED pins as output
+    DDRB |= (1<<4);
+}
+
+void led_set_kb(uint8_t usb_led) {
+    DDRB |= (1<<4);
+    if (usb_led & (1<<USB_LED_CAPS_LOCK)) {
+        // Turn capslock on
+        PORTB |= (1<<4);
+    } else {
+        // Turn capslock off
+        PORTB &= ~(1<<4);
+    }
+}

keyboards/clueboard/rev3/rev3.h

@@ -0,0 +1,52 @@
+#ifndef REV3_H
+#define REV3_H
+
+#include "../clueboard.h"
+
+/* Clueboard matrix layout
+ * ,-----------------------------------------------------------.  ,---.
+ * | 00| 01| 02| 03| 04| 05| 06| 07| 50| 51| 52| 53| 54| 55| 56|  | 57|
+ * |-----------------------------------------------------------|  |---|
+ * |   10| 11| 12| 13| 14| 15| 16| 17| 60| 61| 62| 63| 64|   65|  | 67|
+ * |-----------------------------------------------------------|  `---'
+ * |    20| 21| 22| 23| 24| 25| 26| 27| 70| 71| 72| 73| 74|  75|
+ * |------------------------------------------------------------.
+ * |  30| 31| 32| 33| 34| 35| 36| 37| 80| 81| 82| 83| 84|  85|86|
+ * |------------------------------------------------------------------.
+ * |  40| 41|  42|  43|   45|       46|   90|  92|  93| 94| 95| 96| 97|
+ * `------------------------------------------------------------------'
+ * ,-----------------------------------------------------------.  ,---.
+ * |  `|  1|  2|  3|  4|  5|  6|  7|  8|  9|  0|  -|  =|Yen| BS|  |Ins|
+ * |-----------------------------------------------------------|  |---|
+ * |Tab  |  Q|  W|  E|  R|  T|  Y|  U|  I|  O|  P|  [|  ]|    \|  |Del|
+ * |-----------------------------------------------------------|  `---'
+ * |Caps  |  A|  S|  D|  F|  G|  H|  J|  k|  L|  ;|  '| # | Ent|
+ * |--------------------------------------------------------------.
+ * |Shift| \|  Z|  X|  C|  V|  B|  N|  M|  ,|  .|  /|  \|Shift| Up|
+ * |------------------------------------------------------------------.
+ * |Ctrl|Alt|Gui |MHen| Space| Space|Henk|Gui |Ctrl|  Fn|Left|Down|Rgt|
+ * `------------------------------------------------------------------'
+ */
+// The first section contains all of the arguments
+// The second converts the arguments into a two-dimensional array
+
+#define KEYMAP( \
+    k00, k01, k02, k03, k04, k05, k06, k07, k50, k51, k52, k53, k54, k55, k56, k57, \
+    k10, k11, k12, k13, k14, k15, k16, k17, k60, k61, k62, k63, k64, k65,      k67, \
+    k20, k21, k22, k23, k24, k25, k26, k27, k70, k71, k72, k73, k74, k75, \
+    k30, k31, k32, k33, k34, k35, k36, k37, k80, k81, k82, k83, k84, k85, k86, \
+    k40, k41, k42, k43,      k45, k46,      k90,      k92, k93, k94, k95, k96, k97 \
+) { \
+    { k00, k01, k02, k03, k04, k05, k06, k07 }, \
+    { k10, k11, k12, k13, k14, k15, k16, k17 }, \
+    { k20, k21, k22, k23, k24, k25, k26, k27 }, \
+    { k30, k31, k32, k33, k34, k35, k36, k37 }, \
+    { k40, k41, k42, k43, KC_NO, k45, k46, KC_NO }, \
+    { k50, k51, k52, k53, k54, k55, k56, k57 }, \
+    { k60, k61, k62, k63, k64, k65, KC_NO, k67 }, \
+    { k70, k71, k72, k73, k74, k75, KC_NO, KC_NO }, \
+    { k80, k81, k82, k83, k84, k85, k86, KC_NO }, \
+    { k90, KC_NO, k92, k93, k94, k95, k96, k97 }  \
+}
+
+#endif

keyboards/clueboard/rev3/rules.mk

@@ -0,0 +1 @@
+BACKLIGHT_ENABLE = yes

keyboards/clueboard/rules.mk

@@ -1,92 +1,10 @@
-#----------------------------------------------------------------------------
-# On command line:
-#
-# make all = Make software.
-#
-# make clean = Clean out built project files.
-#
-# make coff = Convert ELF to AVR COFF.
-#
-# make extcoff = Convert ELF to AVR Extended COFF.
-#
-# make program = Download the hex file to the device.
-#                Please customize your programmer settings(PROGRAM_CMD)
-#
-# make teensy = Download the hex file to the device, using teensy_loader_cli.
-#               (must have teensy_loader_cli installed).
-#
-# make dfu = Download the hex file to the device, using dfu-programmer (must
-#            have dfu-programmer installed).
-#
-# make flip = Download the hex file to the device, using Atmel FLIP (must
-#             have Atmel FLIP installed).
-#
-# make dfu-ee = Download the eeprom file to the device, using dfu-programmer
-#               (must have dfu-programmer installed).
-#
-# make flip-ee = Download the eeprom file to the device, using Atmel FLIP
-#                (must have Atmel FLIP installed).
-#
-# make debug = Start either simulavr or avarice as specified for debugging,
-#              with avr-gdb or avr-insight as the front end for debugging.
-#
-# make filename.s = Just compile filename.c into the assembler code only.
-#
-# make filename.i = Create a preprocessed source file for use in submitting
-#                   bug reports to the GCC project.
-#
-# To rebuild project do "make clean" then "make all".
-#----------------------------------------------------------------------------
-
-# MCU name
 MCU = atmega32u4
-
-# Processor frequency.
-#     This will define a symbol, F_CPU, in all source code files equal to the
-#     processor frequency in Hz. You can then use this symbol in your source code to
-#     calculate timings. Do NOT tack on a 'UL' at the end, this will be done
-#     automatically to create a 32-bit value in your source code.
-#
-#     This will be an integer division of F_USB below, as it is sourced by
-#     F_USB after it has run through any CPU prescalers. Note that this value
-#     does not *change* the processor frequency - it should merely be updated to
-#     reflect the processor speed set externally so that the code can use accurate
-#     software delays.
 F_CPU = 16000000
-
-
-#
-# LUFA specific
-#
-# Target architecture (see library "Board Types" documentation).
 ARCH = AVR8
-
-# Input clock frequency.
-#     This will define a symbol, F_USB, in all source code files equal to the
-#     input clock frequency (before any prescaling is performed) in Hz. This value may
-#     differ from F_CPU if prescaling is used on the latter, and is required as the
-#     raw input clock is fed directly to the PLL sections of the AVR for high speed
-#     clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
-#     at the end, this will be done automatically to create a 32-bit value in your
-#     source code.
-#
-#     If no clock division is performed on the input clock inside the AVR (via the
-#     CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
 F_USB = $(F_CPU)
-
-# Interrupt driven control endpoint task(+60)
 OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
-
-
-# Boot Section Size in *bytes*
-#   Teensy halfKay   512
-#   Teensy++ halfKay 1024
-#   Atmel DFU loader 4096
-#   LUFA bootloader  4096
-#   USBaspLoader     2048
 OPT_DEFS += -DBOOTLOADER_SIZE=4096
 
-
 # Build Options
 #   comment out to disable the options.
 #

keyboards/clueboard/subproject.mk

@@ -0,0 +1 @@
+SUBPROJECT_DEFAULT = rev2

keyboards/cluecard/keymaps/default/rules.mk

@@ -0,0 +1,21 @@
+# Build Options
+#   change to "no" to disable the options, or define them in the Makefile in
+#   the appropriate keymap folder that will get included automatically
+#
+BOOTMAGIC_ENABLE = no       # Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE = no       # Mouse keys(+4700)
+EXTRAKEY_ENABLE = no       # Audio control and System control(+450)
+CONSOLE_ENABLE = yes         # Console for debug(+400)
+COMMAND_ENABLE = yes        # Commands for debug and configuration
+NKRO_ENABLE = yes           # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+BACKLIGHT_ENABLE = yes       # Enable keyboard backlight functionality
+MIDI_ENABLE = no            # MIDI controls
+AUDIO_ENABLE = yes           # Audio output on port C6
+UNICODE_ENABLE = no         # Unicode
+BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
+RGBLIGHT_ENABLE = yes        # Enable WS2812 RGB underlight.
+SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
+
+ifndef QUANTUM_DIR
+	include ../../../../Makefile
+endif

keyboards/cluecard/keymaps/rgb_effects/rules.mk

@@ -0,0 +1,21 @@
+# Build Options
+#   change to "no" to disable the options, or define them in the Makefile in
+#   the appropriate keymap folder that will get included automatically
+#
+BOOTMAGIC_ENABLE = no       # Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE = no       # Mouse keys(+4700)
+EXTRAKEY_ENABLE = no       # Audio control and System control(+450)
+CONSOLE_ENABLE = yes         # Console for debug(+400)
+COMMAND_ENABLE = yes        # Commands for debug and configuration
+NKRO_ENABLE = yes           # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+BACKLIGHT_ENABLE = yes       # Enable keyboard backlight functionality
+MIDI_ENABLE = no            # MIDI controls
+AUDIO_ENABLE = no           # Audio output on port C6
+UNICODE_ENABLE = no         # Unicode
+BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
+RGBLIGHT_ENABLE = yes        # Enable WS2812 RGB underlight.
+SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
+
+ifndef QUANTUM_DIR
+	include ../../../../Makefile
+endif

keyboards/converter/ibm_terminal/keymaps/default/rules.mk

@@ -0,0 +1,22 @@
+# Build Options
+#   change to "no" to disable the options, or define them in the Makefile in 
+#   the appropriate keymap folder that will get included automatically
+#
+BOOTMAGIC_ENABLE = no       # Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE = yes        # Mouse keys(+4700)
+EXTRAKEY_ENABLE = yes       # Audio control and System control(+450)
+CONSOLE_ENABLE = no         # Console for debug(+400)
+COMMAND_ENABLE = no         # Commands for debug and configuration
+NKRO_ENABLE = yes           # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality
+MIDI_ENABLE = no            # MIDI controls
+AUDIO_ENABLE = no           # Audio output on port C6
+UNICODE_ENABLE = no         # Unicode
+UNICODEMAP_ENABLE = yes
+BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
+RGBLIGHT_ENABLE = no        # Enable WS2812 RGB underlight.  Do not enable this with audio at the same time.
+PS2_USE_USART = yes
+API_SYSEX_ENABLE = no
+
+# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
+SLEEP_LED_ENABLE = no    # Breathing sleep LED during USB suspend

keyboards/converter/ibm_terminal/keymaps/priyadi/rules.mk

@@ -0,0 +1,22 @@
+# Build Options
+#   change to "no" to disable the options, or define them in the Makefile in 
+#   the appropriate keymap folder that will get included automatically
+#
+BOOTMAGIC_ENABLE = no       # Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE = yes        # Mouse keys(+4700)
+EXTRAKEY_ENABLE = yes       # Audio control and System control(+450)
+CONSOLE_ENABLE = no         # Console for debug(+400)
+COMMAND_ENABLE = no         # Commands for debug and configuration
+NKRO_ENABLE = yes           # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality
+MIDI_ENABLE = no            # MIDI controls
+AUDIO_ENABLE = no           # Audio output on port C6
+UNICODE_ENABLE = no         # Unicode
+UNICODEMAP_ENABLE = yes
+BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
+RGBLIGHT_ENABLE = no        # Enable WS2812 RGB underlight.  Do not enable this with audio at the same time.
+PS2_USE_USART = yes
+API_SYSEX_ENABLE = no
+
+# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
+SLEEP_LED_ENABLE = no    # Breathing sleep LED during USB suspend

keyboards/deltasplit75/keymaps/itsaferbie/rules.mk

@@ -0,0 +1,7 @@
+RGBLIGHT_ENABLE = yes        # Enable WS2812 RGB underlight.  Do not enable this with audio at the same time.
+AUDIO_ENABLE = no            # Audio disabled while using RGB underlight.
+EXTRAKEY_ENABLE = yes
+
+ifndef QUANTUM_DIR
+	include ../../../../Makefile
+endif

keyboards/deltasplit75/subproject.mk

@@ -0,0 +1 @@
+SUBPROJECT_DEFAULT = v2

keyboards/eco/keymaps/default/rules.mk

@@ -0,0 +1,25 @@
+
+
+# Build Options
+#   change to "no" to disable the options, or define them in the Makefile in 
+#   the appropriate keymap folder that will get included automatically
+#
+BOOTMAGIC_ENABLE = no       # Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE = yes       # Mouse keys(+4700)
+EXTRAKEY_ENABLE = yes       # Audio control and System control(+450)
+CONSOLE_ENABLE = no         # Console for debug(+400)
+COMMAND_ENABLE = no        # Commands for debug and configuration
+NKRO_ENABLE = yes            # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+BACKLIGHT_ENABLE = no      # Enable keyboard backlight functionality
+MIDI_ENABLE = no            # MIDI controls
+AUDIO_ENABLE = no          # Audio output on port C6
+UNICODE_ENABLE = no         # Unicode
+BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
+RGBLIGHT_ENABLE = no        # Enable WS2812 RGB underlight.  Do not enable this with audio at the same time.
+
+# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
+SLEEP_LED_ENABLE = no    # Breathing sleep LED during USB suspend
+
+ifndef QUANTUM_DIR
+	include ../../../../Makefile
+endif

keyboards/eco/keymaps/that_canadian/rules.mk

@@ -0,0 +1,25 @@
+
+
+# Build Options
+#   change to "no" to disable the options, or define them in the Makefile in 
+#   the appropriate keymap folder that will get included automatically
+#
+BOOTMAGIC_ENABLE = no       # Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE = yes       # Mouse keys(+4700)
+EXTRAKEY_ENABLE = yes       # Audio control and System control(+450)
+CONSOLE_ENABLE = no         # Console for debug(+400)
+COMMAND_ENABLE = no        # Commands for debug and configuration
+NKRO_ENABLE = yes            # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+BACKLIGHT_ENABLE = no      # Enable keyboard backlight functionality
+MIDI_ENABLE = no            # MIDI controls
+AUDIO_ENABLE = no          # Audio output on port C6
+UNICODE_ENABLE = no         # Unicode
+BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
+RGBLIGHT_ENABLE = no        # Enable WS2812 RGB underlight.  Do not enable this with audio at the same time.
+
+# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
+SLEEP_LED_ENABLE = no    # Breathing sleep LED during USB suspend
+
+ifndef QUANTUM_DIR
+	include ../../../../Makefile
+endif

keyboards/eco/subproject.mk

@@ -0,0 +1 @@
+SUBPROJECT_DEFAULT = rev2

keyboards/ergodox_ez/keymaps/drashna-custom/rules.mk

@@ -0,0 +1,9 @@
+TAP_DANCE_ENABLE = yes
+SLEEP_LED_ENABLE = yes  # Breathing sleep LED during USB suspend
+COMMAND_ENABLE   = no  # Commands for debug and configuration
+RGBLIGHT_ENABLE = yes
+MIDI_ENABLE = no
+
+ifndef QUANTUM_DIR
+	include ../../../../Makefile
+endif

keyboards/ergodox_ez/keymaps/drashna/rules.mk

@@ -0,0 +1,6 @@
+RGBLIGHT_ENABLE = yes
+RGBLIGHT_ANIMATION = no
+
+ifndef QUANTUM_DIR
+	include ../../../../Makefile
+endif

keyboards/ergodox_ez/keymaps/steno/rules.mk

@@ -0,0 +1,3 @@
+VIRTSER_ENABLE = yes
+# Not enough interupts, so something has to go
+MOUSEKEY_ENABLE = no

keyboards/ergodox_infinity/Makefile

@@ -1,3 +1,3 @@
 ifndef MAKEFILE_INCLUDED
-	include ../../../Makefile
+	include ../../Makefile
 endif

keyboards/ergodox_infinity/keymaps/default/keymap.c

@@ -0,0 +1,223 @@
+#include QMK_KEYBOARD_H
+#include "debug.h"
+#include "action_layer.h"
+#include "version.h"
+
+#define BASE 0 // default layer
+#define SYMB 1 // symbols
+#define MDIA 2 // media keys
+
+enum custom_keycodes {
+  PLACEHOLDER = SAFE_RANGE, // can always be here
+  EPRM,
+  VRSN,
+  RGB_SLD
+};
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+/* Keymap 0: Basic layer
+ *
+ * ,--------------------------------------------------.           ,--------------------------------------------------.
+ * |   =    |   1  |   2  |   3  |   4  |   5  | LEFT |           | RIGHT|   6  |   7  |   8  |   9  |   0  |   -    |
+ * |--------+------+------+------+------+-------------|           |------+------+------+------+------+------+--------|
+ * | Del    |   Q  |   W  |   E  |   R  |   T  |  L1  |           |  L1  |   Y  |   U  |   I  |   O  |   P  |   \    |
+ * |--------+------+------+------+------+------|      |           |      |------+------+------+------+------+--------|
+ * | BkSp   |   A  |   S  |   D  |   F  |   G  |------|           |------|   H  |   J  |   K  |   L  |; / L2|' / Cmd |
+ * |--------+------+------+------+------+------| Hyper|           | Meh  |------+------+------+------+------+--------|
+ * | LShift |Z/Ctrl|   X  |   C  |   V  |   B  |      |           |      |   N  |   M  |   ,  |   .  |//Ctrl| RShift |
+ * `--------+------+------+------+------+-------------'           `-------------+------+------+------+------+--------'
+ *   |Grv/L1|  '"  |AltShf| Left | Right|                                       |  Up  | Down |   [  |   ]  | ~L1  |
+ *   `----------------------------------'                                       `----------------------------------'
+ *                                        ,-------------.       ,-------------.
+ *                                        | App  | LGui |       | Alt  |Ctrl/Esc|
+ *                                 ,------|------|------|       |------+--------+------.
+ *                                 |      |      | Home |       | PgUp |        |      |
+ *                                 | Space|Backsp|------|       |------|  Tab   |Enter |
+ *                                 |      |ace   | End  |       | PgDn |        |      |
+ *                                 `--------------------'       `----------------------'
+ */
+// If it accepts an argument (i.e, is a function), it doesn't need KC_.
+// Otherwise, it needs KC_*
+[BASE] = LAYOUT_ergodox(  // layer 0 : default
+        // left hand
+        KC_EQL,         KC_1,         KC_2,   KC_3,   KC_4,   KC_5,   KC_LEFT,
+        KC_DELT,        KC_Q,         KC_W,   KC_E,   KC_R,   KC_T,   TG(SYMB),
+        KC_BSPC,        KC_A,         KC_S,   KC_D,   KC_F,   KC_G,
+        KC_LSFT,        CTL_T(KC_Z),  KC_X,   KC_C,   KC_V,   KC_B,   ALL_T(KC_NO),
+        LT(SYMB,KC_GRV),KC_QUOT,      LALT(KC_LSFT),  KC_LEFT,KC_RGHT,
+                                              ALT_T(KC_APP),  KC_LGUI,
+                                                              KC_HOME,
+                                               KC_SPC,KC_BSPC,KC_END,
+        // right hand
+             KC_RGHT,     KC_6,   KC_7,  KC_8,   KC_9,   KC_0,             KC_MINS,
+             TG(SYMB),    KC_Y,   KC_U,  KC_I,   KC_O,   KC_P,             KC_BSLS,
+                          KC_H,   KC_J,  KC_K,   KC_L,   LT(MDIA, KC_SCLN),GUI_T(KC_QUOT),
+             MEH_T(KC_NO),KC_N,   KC_M,  KC_COMM,KC_DOT, CTL_T(KC_SLSH),   KC_RSFT,
+                                  KC_UP, KC_DOWN,KC_LBRC,KC_RBRC,          KC_FN1,
+             KC_LALT,        CTL_T(KC_ESC),
+             KC_PGUP,
+             KC_PGDN,KC_TAB, KC_ENT
+    ),
+/* Keymap 1: Symbol Layer
+ *
+ * ,---------------------------------------------------.           ,--------------------------------------------------.
+ * |Version  |  F1  |  F2  |  F3  |  F4  |  F5  |      |           |      |  F6  |  F7  |  F8  |  F9  |  F10 |   F11  |
+ * |---------+------+------+------+------+------+------|           |------+------+------+------+------+------+--------|
+ * |         |   !  |   @  |   {  |   }  |   |  |      |           |      |   Up |   7  |   8  |   9  |   *  |   F12  |
+ * |---------+------+------+------+------+------|      |           |      |------+------+------+------+------+--------|
+ * |         |   #  |   $  |   (  |   )  |   `  |------|           |------| Down |   4  |   5  |   6  |   +  |        |
+ * |---------+------+------+------+------+------|      |           |      |------+------+------+------+------+--------|
+ * |         |   %  |   ^  |   [  |   ]  |   ~  |      |           |      |   &  |   1  |   2  |   3  |   \  |        |
+ * `---------+------+------+------+------+-------------'           `-------------+------+------+------+------+--------'
+ *   | EPRM  |      |      |      |      |                                       |      |    . |   0  |   =  |      |
+ *   `-----------------------------------'                                       `----------------------------------'
+ *                                        ,-------------.       ,-------------.
+ *                                        |Animat|      |       |Toggle|Solid |
+ *                                 ,------|------|------|       |------+------+------.
+ *                                 |Bright|Bright|      |       |      |Hue-  |Hue+  |
+ *                                 |ness- |ness+ |------|       |------|      |      |
+ *                                 |      |      |      |       |      |      |      |
+ *                                 `--------------------'       `--------------------'
+ */
+// SYMBOLS
+[SYMB] = LAYOUT_ergodox(
+       // left hand
+       VRSN,   KC_F1,  KC_F2,  KC_F3,  KC_F4,  KC_F5,  KC_TRNS,
+       KC_TRNS,KC_EXLM,KC_AT,  KC_LCBR,KC_RCBR,KC_PIPE,KC_TRNS,
+       KC_TRNS,KC_HASH,KC_DLR, KC_LPRN,KC_RPRN,KC_GRV,
+       KC_TRNS,KC_PERC,KC_CIRC,KC_LBRC,KC_RBRC,KC_TILD,KC_TRNS,
+          EPRM,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,
+                                       RGB_MOD,KC_TRNS,
+                                               KC_TRNS,
+                               RGB_VAD,RGB_VAI,KC_TRNS,
+       // right hand
+       KC_TRNS, KC_F6,   KC_F7,  KC_F8,   KC_F9,   KC_F10,  KC_F11,
+       KC_TRNS, KC_UP,   KC_7,   KC_8,    KC_9,    KC_ASTR, KC_F12,
+                KC_DOWN, KC_4,   KC_5,    KC_6,    KC_PLUS, KC_TRNS,
+       KC_TRNS, KC_AMPR, KC_1,   KC_2,    KC_3,    KC_BSLS, KC_TRNS,
+                         KC_TRNS,KC_DOT,  KC_0,    KC_EQL,  KC_TRNS,
+       RGB_TOG, RGB_SLD,
+       KC_TRNS,
+       KC_TRNS, RGB_HUD, RGB_HUI
+),
+/* Keymap 2: Media and mouse keys
+ *
+ * ,--------------------------------------------------.           ,--------------------------------------------------.
+ * |        |      |      |      |      |      |      |           |      |      |      |      |      |      |        |
+ * |--------+------+------+------+------+-------------|           |------+------+------+------+------+------+--------|
+ * |        |      |      | MsUp |      |      |      |           |      |      |      |      |      |      |        |
+ * |--------+------+------+------+------+------|      |           |      |------+------+------+------+------+--------|
+ * |        |      |MsLeft|MsDown|MsRght|      |------|           |------|      |      |      |      |      |  Play  |
+ * |--------+------+------+------+------+------|      |           |      |------+------+------+------+------+--------|
+ * |        |      |      |      |      |      |      |           |      |      |      | Prev | Next |      |        |
+ * `--------+------+------+------+------+-------------'           `-------------+------+------+------+------+--------'
+ *   |      |      |      | Lclk | Rclk |                                       |VolUp |VolDn | Mute |      |      |
+ *   `----------------------------------'                                       `----------------------------------'
+ *                                        ,-------------.       ,-------------.
+ *                                        |      |      |       |      |      |
+ *                                 ,------|------|------|       |------+------+------.
+ *                                 |      |      |      |       |      |      |Brwser|
+ *                                 |      |      |------|       |------|      |Back  |
+ *                                 |      |      |      |       |      |      |      |
+ *                                 `--------------------'       `--------------------'
+ */
+// MEDIA AND MOUSE
+[MDIA] = LAYOUT_ergodox(
+       KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+       KC_TRNS, KC_TRNS, KC_TRNS, KC_MS_U, KC_TRNS, KC_TRNS, KC_TRNS,
+       KC_TRNS, KC_TRNS, KC_MS_L, KC_MS_D, KC_MS_R, KC_TRNS,
+       KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+       KC_TRNS, KC_TRNS, KC_TRNS, KC_BTN1, KC_BTN2,
+                                           KC_TRNS, KC_TRNS,
+                                                    KC_TRNS,
+                                  KC_TRNS, KC_TRNS, KC_TRNS,
+    // right hand
+       KC_TRNS,  KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+       KC_TRNS,  KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+                 KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_MPLY,
+       KC_TRNS,  KC_TRNS, KC_TRNS, KC_MPRV, KC_MNXT, KC_TRNS, KC_TRNS,
+                          KC_VOLU, KC_VOLD, KC_MUTE, KC_TRNS, KC_TRNS,
+       KC_TRNS, KC_TRNS,
+       KC_TRNS,
+       KC_TRNS, KC_TRNS, KC_WBAK
+),
+};
+
+const uint16_t PROGMEM fn_actions[] = {
+    [1] = ACTION_LAYER_TAP_TOGGLE(SYMB)                // FN1 - Momentary Layer 1 (Symbols)
+};
+
+const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt)
+{
+  // MACRODOWN only works in this function
+      switch(id) {
+        case 0:
+        if (record->event.pressed) {
+          SEND_STRING (QMK_KEYBOARD "/" QMK_KEYMAP " @ " QMK_VERSION);
+        }
+        break;
+        case 1:
+        if (record->event.pressed) { // For resetting EEPROM
+          eeconfig_init();
+        }
+        break;
+      }
+    return MACRO_NONE;
+};
+
+bool process_record_user(uint16_t keycode, keyrecord_t *record) {
+  switch (keycode) {
+    // dynamically generate these.
+    case EPRM:
+      if (record->event.pressed) {
+        eeconfig_init();
+      }
+      return false;
+      break;
+    case VRSN:
+      if (record->event.pressed) {
+        SEND_STRING (QMK_KEYBOARD "/" QMK_KEYMAP " @ " QMK_VERSION);
+      }
+      return false;
+      break;
+    case RGB_SLD:
+      if (record->event.pressed) {
+        #ifdef RGBLIGHT_ENABLE
+          rgblight_mode(1);
+        #endif
+      }
+      return false;
+      break;
+  }
+  return true;
+}
+
+// Runs just one time when the keyboard initializes.
+void matrix_init_user(void) {
+
+};
+
+
+// Runs constantly in the background, in a loop.
+void matrix_scan_user(void) {
+
+    uint8_t layer = biton32(layer_state);
+
+    ergodox_board_led_off();
+    ergodox_right_led_1_off();
+    ergodox_right_led_2_off();
+    ergodox_right_led_3_off();
+    switch (layer) {
+      // TODO: Make this relevant to the ErgoDox EZ.
+        case 1:
+            ergodox_right_led_1_on();
+            break;
+        case 2:
+            ergodox_right_led_2_on();
+            break;
+        default:
+            // none
+            break;
+    }
+
+};

keyboards/frosty_flake/frosty_flake.h

@@ -47,4 +47,44 @@
 /* 7 */ {   KA7,    KB7,    KC7,    KD7,    KE7,    KF7,    KG7,    KH7,    KI7,    KJ7,    KC_NO,  KC_NO,  KC_NO,  KC_NO,  KO7,    KC_NO,  KQ7,    KR7     }  \
 }
 
+/*
+  Matrix col/row mapping (TKL)
+
+  ,----.    ,-------------------. ,-------------------. ,-------------------. ,--------------.
+  | J6 |    | I4 | H4 | H2 | H6 | | A7 | E6 | D2 | D4 | | B4 | B7 | B6 | B0 | | C7 | C5 | A5 |
+  `----'    `-------------------' `-------------------' `-------------------' `--------------'
+  ,-------------------------------------------------------------------------. ,--------------.
+  | J4 | J7 | I7 | H7 | G7 | G4 | F4 | F7 | E7 | D7 | R7 | R4 | E4 |     B2 | | L4 | O4 | Q4 |
+  |-------------------------------------------------------------------------| |--------------|
+  | J2   | J5 | I5 | H5 | G5 | G2 | F2 | F5 | E5 | D5 | R5 | R2 | E2 |   B3 | | K4 | O7 | Q7 |
+  |-------------------------------------------------------------------------| '--------------'
+  | O5    | J3 | I3 | H3 | G3 | G6 | F6 | F3 | E3 | D3 | R3 | R6 |       B1 |
+  |-------------------------------------------------------------------------|      ,----.
+  | N2      | J1 | I1 | H1 | G1 | G0 | F0 | F1 | E1 | D1 | R0 |          N3 |      | O6 |
+  |-------------------------------------------------------------------------| ,--------------.
+  | A4 | P2 | C6 |                  K6                  | C0 | M3 | D0 | A1 | | O0 | K0 | L0 |
+  `-------------------------------------------------------------------------' `--------------'
+*/
+
+#define KEYMAP_TKL( \
+  KJ6,      KI4, KH4, KH2, KH6, KA7, KE6, KD2, KD4, KB4, KB7, KB6, KB0,   KC7, KC5, KA5, \
+  KJ4, KJ7, KI7, KH7, KG7, KG4, KF4, KF7, KE7, KD7, KR7, KR4, KE4, KB2,   KL4, KO4, KQ4, \
+  KJ2, KJ5, KI5, KH5, KG5, KG2, KF2, KF5, KE5, KD5, KR5, KR2, KE2, KB3,   KK4, KO7, KQ7, \
+  KI2, KJ3, KI3, KH3, KG3, KG6, KF6, KF3, KE3, KD3, KR3, KR6,      KB1,                  \
+  KN2, KI6, KJ1, KI1, KH1, KG1, KG0, KF0, KF1, KE1, KD1, KR0,      KN3,        KO6,      \
+  KA4, KP2, KC6,                KK6,                KC0, KM3, KD0, KA1,   KO0, KK0, KL0  \
+) \
+{ \
+/* Columns and rows need to be swapped in the below definition */ \
+/*          A       B       C       D       E       F       G       H       I       J       K       L       M       N       O       P       Q       R       */ \
+/* 0 */ {   KC_NO,  KB0,    KC0,    KD0,    KC_NO,  KF0,    KG0,    KC_NO,  KC_NO,  KC_NO,  KK0,    KL0,    KC_NO,  KC_NO,  KO0,    KC_NO,  KC_NO,  KR0     }, \
+/* 1 */ {   KA1,    KB1,    KC_NO,  KD1,    KE1,    KF1,    KG1,    KH1,    KI1,    KJ1,    KC_NO,  KC_NO,  KC_NO,  KC_NO,  KC_NO,  KC_NO,  KC_NO,  KC_NO   }, \
+/* 2 */ {   KC_NO,  KB2,    KC_NO,  KD2,    KE2,    KF2,    KG2,    KH2,    KI2,    KJ2,    KC_NO,  KC_NO,  KC_NO,  KN2,    KC_NO,  KP2,    KC_NO,  KR2     }, \
+/* 3 */ {   KC_NO,  KB3,    KC_NO,  KD3,    KE3,    KF3,    KG3,    KH3,    KI3,    KJ3,    KC_NO,  KC_NO,  KM3,    KN3,    KC_NO,  KC_NO,  KC_NO,  KR3     }, \
+/* 4 */ {   KA4,    KB4,    KC_NO,  KD4,    KE4,    KF4,    KG4,    KH4,    KI4,    KJ4,    KK4,    KL4,    KC_NO,  KC_NO,  KO4,    KC_NO,  KQ4,    KR4     }, \
+/* 5 */ {   KA5,    KC_NO,  KC5,    KD5,    KE5,    KF5,    KG5,    KH5,    KI5,    KJ5,    KC_NO,  KC_NO,  KC_NO,  KC_NO,  KC_NO,  KC_NO,  KC_NO,  KR5     }, \
+/* 6 */ {   KC_NO,  KB6,    KC6,    KC_NO,  KE6,    KF6,    KG6,    KH6,    KI6,    KJ6,    KK6,    KC_NO,  KC_NO,  KC_NO,  KO6,    KC_NO,  KC_NO,  KR6     }, \
+/* 7 */ {   KA7,    KB7,    KC7,    KD7,    KE7,    KF7,    KG7,    KH7,    KI7,    KJ7,    KC_NO,  KC_NO,  KC_NO,  KC_NO,  KO7,    KC_NO,  KQ7,    KR7     }  \
+}
+
 #endif

keyboards/frosty_flake/keymaps/default/rules.mk

@@ -0,0 +1,21 @@
+# Build Options
+#   change to "no" to disable the options, or define them in the Makefile in 
+#   the appropriate keymap folder that will get included automatically
+#
+BOOTMAGIC_ENABLE = no       # Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE = yes       # Mouse keys(+4700)
+EXTRAKEY_ENABLE = yes       # Audio control and System control(+450)
+CONSOLE_ENABLE = no         # Console for debug(+400)
+COMMAND_ENABLE = yes        # Commands for debug and configuration
+NKRO_ENABLE = yes           # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality
+MIDI_ENABLE = no            # MIDI controls
+AUDIO_ENABLE = no           # Audio output on port C6
+UNICODE_ENABLE = no         # Unicode
+BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
+RGBLIGHT_ENABLE = no        # Enable WS2812 RGB underlight.  Do not enable this with audio at the same time.
+SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
+
+ifndef QUANTUM_DIR
+	include ../../../../Makefile
+endif

keyboards/frosty_flake/keymaps/nikchi/rules.mk

@@ -0,0 +1,23 @@
+# Build Options
+#   change to "no" to disable the options, or define them in the Makefile in 
+#   the appropriate keymap folder that will get included automatically
+#
+BOOTMAGIC_ENABLE = no       # Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE = yes       # Mouse keys(+4700)
+EXTRAKEY_ENABLE = yes       # Audio control and System control(+450)
+CONSOLE_ENABLE = no         # Console for debug(+400)
+COMMAND_ENABLE = no         # Commands for debug and configuration
+NKRO_ENABLE = yes           # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality
+MIDI_ENABLE = no            # MIDI controls
+AUDIO_ENABLE = no           # Audio output on port C6
+UNICODE_ENABLE = no         # Unicode
+UNICODEMAP_ENABLE = yes		# unicodemap
+BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
+RGBLIGHT_ENABLE = no        # Enable WS2812 RGB underlight.  Do not enable this with audio at the same time.
+SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
+TAP_DANCE_ENABLE = yes
+
+ifndef QUANTUM_DIR
+	include ../../../../Makefile
+endif

keyboards/frosty_flake/keymaps/tkl/config.h

@@ -0,0 +1,8 @@
+#ifndef CONFIG_USER_H
+#define CONFIG_USER_H
+
+#include "../../config.h"
+
+// place overrides here
+
+#endif

keyboards/frosty_flake/keymaps/tkl/keymap.c

@@ -0,0 +1,11 @@
+#include "frosty_flake.h"
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+[0] = KEYMAP_TKL(\
+                 KC_ESC, KC_F1,  KC_F2,  KC_F3,  KC_F4,  KC_F5,  KC_F6,  KC_F7,  KC_F8,  KC_F9,  KC_F10, KC_F11,  KC_F12,             KC_PSCR, KC_SLCK, KC_PAUS, \
+                 KC_GRV, KC_1,   KC_2,   KC_3,   KC_4,   KC_5,   KC_6,   KC_7,   KC_8,   KC_9,   KC_0,   KC_MINS, KC_EQL,  KC_BSPC,   KC_INS,  KC_HOME, KC_PGUP, \
+                 KC_TAB, KC_Q,   KC_W,   KC_E,   KC_R,   KC_T,   KC_Y,   KC_U,   KC_I,   KC_O,   KC_P,   KC_LBRC, KC_RBRC, KC_BSLS,   KC_DEL,  KC_END,  KC_PGDN, \
+                 KC_CAPS,KC_A,   KC_S,   KC_D,   KC_F,   KC_G,   KC_H,   KC_J,   KC_K,   KC_L,   KC_SCLN,KC_QUOT,          KC_ENT, \
+                 KC_LSFT,KC_NUBS,KC_Z,   KC_X,   KC_C,   KC_V,   KC_B,   KC_N,   KC_M,   KC_COMM,KC_DOT, KC_SLSH,          KC_RSFT,            KC_UP, \
+                 KC_LCTL,KC_LGUI,KC_LALT,                KC_SPC,                                 KC_RALT,KC_RGUI, KC_APP,  KC_RCTL,   KC_LEFT, KC_DOWN, KC_RGHT  )
+};

keyboards/frosty_flake/keymaps/tkl/readme.md

@@ -0,0 +1 @@
+# TKL keymap for frosty_flake

keyboards/frosty_flake/keymaps/tkl/rules.mk

@@ -0,0 +1,17 @@
+# Build Options
+#   change to "no" to disable the options, or define them in the Makefile in
+#   the appropriate keymap folder that will get included automatically
+#
+BOOTMAGIC_ENABLE = no       # Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE = no        # Mouse keys(+4700)
+EXTRAKEY_ENABLE = yes       # Audio control and System control(+450)
+CONSOLE_ENABLE = yes        # Console for debug(+400)
+COMMAND_ENABLE = yes        # Commands for debug and configuration
+NKRO_ENABLE = no            # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality
+MIDI_ENABLE = no            # MIDI controls
+AUDIO_ENABLE = no           # Audio output on port C6
+UNICODE_ENABLE = no         # Unicode
+BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
+RGBLIGHT_ENABLE = no        # Enable WS2812 RGB underlight.  Do not enable this with audio at the same time.
+SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend

keyboards/frosty_flake/readme.md

@@ -1,16 +1,46 @@
-Frosty Flake Controller
-===
+# Frosty Flake Controller
 
-This is the firmware for Rev. 20140521 of the Frosty Flake controller by [Bathroom Epiphanies](http://bathroomepiphanies.com/controllers/), a replacement controller for the [Cooler Master Quick Fire Rapid](http://www.coolermaster.com/peripheral/keyboards/quickfirerapid/).
+This is the firmware for Rev. 20140521 of the Frosty Flake controller
+by [Bathroom Epiphanies](http://bathroomepiphanies.com/controllers/),
+a replacement controller for the [Cooler Master Quick Fire
+Rapid](http://www.coolermaster.com/peripheral/keyboards/quickfirerapid/).
 
-The code was adapted from the [BathroomEpiphanies TMK Firmware](https://github.com/BathroomEpiphanies/epiphanies_tmk_keyboard/tree/master/be_controllers), but has been cleaned up to match the [schematic](https://deskthority.net/wiki/File:Frosty_Flake_Schematics.pdf) and gone through some minor refactoring for QMK.
+The code was adapted from the [BathroomEpiphanies TMK
+Firmware](https://github.com/BathroomEpiphanies/epiphanies_tmk_keyboard/tree/master/be_controllers),
+but has been cleaned up to match the
+[schematic](https://deskthority.net/wiki/File:Frosty_Flake_Schematics.pdf)
+and gone through some minor refactoring for QMK.
 
-Keyboard Maintainer: QMK Community
-Hardware Supported: Frosty Flake
-Hardware Availability: https://1upkeyboards.com/qfr-frosty-flake-controller.html
+## 104 and 87 layout support
+
+Support for both 104 key and 87 key layouts is provided. See the
+keymaps `default` (104) and `tkl` (87) for example layouts.
+
+Keyboard Maintainer: QMK Community  
+Hardware Supported: Frosty Flake  
+Hardware Availability: https://1upkeyboards.com/qfr-frosty-flake-controller.html  
 
 Make example for this keyboard (after setting up your build environment):
 
-    make frosty_flake-default
+104 key default layout:
 
-See [build environment setup](https://docs.qmk.fm/build_environment_setup.html) then the [make instructions](https://docs.qmk.fm/make_instructions.html) for more information.
+```
+make frosty_flake-default
+```
+
+To directly flash the frosty_flake after compiling use
+
+```
+make frosty_flake-default-dfu
+```
+
+87 key tkl layout:
+
+```
+make frosty_flake-tkl-dfu
+```
+
+See [build environment
+setup](https://docs.qmk.fm/build_environment_setup.html) then the
+[make instructions](https://docs.qmk.fm/make_instructions.html) for
+more information.

keyboards/gh60/keymaps/dbroqua/rules.mk

@@ -0,0 +1,112 @@
+#----------------------------------------------------------------------------
+# On command line:
+#
+# make all = Make software.
+#
+# make clean = Clean out built project files.
+#
+# make coff = Convert ELF to AVR COFF.
+#
+# make extcoff = Convert ELF to AVR Extended COFF.
+#
+# make program = Download the hex file to the device.
+#                Please customize your programmer settings(PROGRAM_CMD)
+#
+# make teensy = Download the hex file to the device, using teensy_loader_cli.
+#               (must have teensy_loader_cli installed).
+#
+# make dfu = Download the hex file to the device, using dfu-programmer (must
+#            have dfu-programmer installed).
+#
+# make flip = Download the hex file to the device, using Atmel FLIP (must
+#             have Atmel FLIP installed).
+#
+# make dfu-ee = Download the eeprom file to the device, using dfu-programmer
+#               (must have dfu-programmer installed).
+#
+# make flip-ee = Download the eeprom file to the device, using Atmel FLIP
+#                (must have Atmel FLIP installed).
+#
+# make debug = Start either simulavr or avarice as specified for debugging, 
+#              with avr-gdb or avr-insight as the front end for debugging.
+#
+# make filename.s = Just compile filename.c into the assembler code only.
+#
+# make filename.i = Create a preprocessed source file for use in submitting
+#                   bug reports to the GCC project.
+#
+# To rebuild project do "make clean" then "make all".
+#----------------------------------------------------------------------------
+
+# MCU name
+#MCU = at90usb1287
+MCU = atmega32u4
+
+# Processor frequency.
+#     This will define a symbol, F_CPU, in all source code files equal to the
+#     processor frequency in Hz. You can then use this symbol in your source code to
+#     calculate timings. Do NOT tack on a 'UL' at the end, this will be done
+#     automatically to create a 32-bit value in your source code.
+#
+#     This will be an integer division of F_USB below, as it is sourced by
+#     F_USB after it has run through any CPU prescalers. Note that this value
+#     does not *change* the processor frequency - it should merely be updated to
+#     reflect the processor speed set externally so that the code can use accurate
+#     software delays.
+F_CPU = 16000000
+
+
+#
+# LUFA specific
+#
+# Target architecture (see library "Board Types" documentation).
+ARCH = AVR8
+
+# Input clock frequency.
+#     This will define a symbol, F_USB, in all source code files equal to the
+#     input clock frequency (before any prescaling is performed) in Hz. This value may
+#     differ from F_CPU if prescaling is used on the latter, and is required as the
+#     raw input clock is fed directly to the PLL sections of the AVR for high speed
+#     clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
+#     at the end, this will be done automatically to create a 32-bit value in your
+#     source code.
+#
+#     If no clock division is performed on the input clock inside the AVR (via the
+#     CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
+F_USB = $(F_CPU)
+
+# Interrupt driven control endpoint task(+60)
+OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
+
+
+# Boot Section Size in *bytes*
+#   Teensy halfKay   512
+#   Teensy++ halfKay 1024
+#   Atmel DFU loader 4096
+#   LUFA bootloader  4096
+#   USBaspLoader     2048
+OPT_DEFS += -DBOOTLOADER_SIZE=4096
+
+
+# Build Options
+#   comment out to disable the options.
+#
+BOOTMAGIC_ENABLE = yes		# Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE = yes		# Mouse keys(+4700)
+EXTRAKEY_ENABLE = yes		# Audio control and System control(+450)
+# CONSOLE_ENABLE = yes		# Console for debug(+400)
+# COMMAND_ENABLE = yes		# Commands for debug and configuration
+KEYBOARD_LOCK_ENABLE = yes	# Allow locking of keyboard via magic key
+# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
+SLEEP_LED_ENABLE = yes	    # Breathing sleep LED during USB suspend
+NKRO_ENABLE = yes		    # USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+# BACKLIGHT_ENABLE = yes	# Enable keyboard backlight functionality
+# MIDI_ENABLE = YES		# MIDI controls
+# UNICODE_ENABLE = YES		# Unicode
+# BLUETOOTH_ENABLE = yes	# Enable Bluetooth with the Adafruit EZ-Key HID
+RGBLIGHT_ENABLE = yes    # Enable RGB Underglow
+
+ifndef QUANTUM_DIR
+	include ../../../../Makefile
+endif
+

keyboards/gh60/keymaps/dbroqua_7U/rules.mk

@@ -0,0 +1,111 @@
+#----------------------------------------------------------------------------
+# On command line:
+#
+# make all = Make software.
+#
+# make clean = Clean out built project files.
+#
+# make coff = Convert ELF to AVR COFF.
+#
+# make extcoff = Convert ELF to AVR Extended COFF.
+#
+# make program = Download the hex file to the device.
+#                Please customize your programmer settings(PROGRAM_CMD)
+#
+# make teensy = Download the hex file to the device, using teensy_loader_cli.
+#               (must have teensy_loader_cli installed).
+#
+# make dfu = Download the hex file to the device, using dfu-programmer (must
+#            have dfu-programmer installed).
+#
+# make flip = Download the hex file to the device, using Atmel FLIP (must
+#             have Atmel FLIP installed).
+#
+# make dfu-ee = Download the eeprom file to the device, using dfu-programmer
+#               (must have dfu-programmer installed).
+#
+# make flip-ee = Download the eeprom file to the device, using Atmel FLIP
+#                (must have Atmel FLIP installed).
+#
+# make debug = Start either simulavr or avarice as specified for debugging, 
+#              with avr-gdb or avr-insight as the front end for debugging.
+#
+# make filename.s = Just compile filename.c into the assembler code only.
+#
+# make filename.i = Create a preprocessed source file for use in submitting
+#                   bug reports to the GCC project.
+#
+# To rebuild project do "make clean" then "make all".
+#----------------------------------------------------------------------------
+
+# MCU name
+#MCU = at90usb1287
+MCU = atmega32u4
+
+# Processor frequency.
+#     This will define a symbol, F_CPU, in all source code files equal to the
+#     processor frequency in Hz. You can then use this symbol in your source code to
+#     calculate timings. Do NOT tack on a 'UL' at the end, this will be done
+#     automatically to create a 32-bit value in your source code.
+#
+#     This will be an integer division of F_USB below, as it is sourced by
+#     F_USB after it has run through any CPU prescalers. Note that this value
+#     does not *change* the processor frequency - it should merely be updated to
+#     reflect the processor speed set externally so that the code can use accurate
+#     software delays.
+F_CPU = 16000000
+
+
+#
+# LUFA specific
+#
+# Target architecture (see library "Board Types" documentation).
+ARCH = AVR8
+
+# Input clock frequency.
+#     This will define a symbol, F_USB, in all source code files equal to the
+#     input clock frequency (before any prescaling is performed) in Hz. This value may
+#     differ from F_CPU if prescaling is used on the latter, and is required as the
+#     raw input clock is fed directly to the PLL sections of the AVR for high speed
+#     clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
+#     at the end, this will be done automatically to create a 32-bit value in your
+#     source code.
+#
+#     If no clock division is performed on the input clock inside the AVR (via the
+#     CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
+F_USB = $(F_CPU)
+
+# Interrupt driven control endpoint task(+60)
+OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
+
+
+# Boot Section Size in *bytes*
+#   Teensy halfKay   512
+#   Teensy++ halfKay 1024
+#   Atmel DFU loader 4096
+#   LUFA bootloader  4096
+#   USBaspLoader     2048
+OPT_DEFS += -DBOOTLOADER_SIZE=4096
+
+
+# Build Options
+#   comment out to disable the options.
+#
+BOOTMAGIC_ENABLE = yes		# Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE = yes		# Mouse keys(+4700)
+EXTRAKEY_ENABLE = yes		# Audio control and System control(+450)
+# CONSOLE_ENABLE = yes		# Console for debug(+400)
+# COMMAND_ENABLE = yes		# Commands for debug and configuration
+KEYBOARD_LOCK_ENABLE = yes	# Allow locking of keyboard via magic key
+# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
+SLEEP_LED_ENABLE = yes	    # Breathing sleep LED during USB suspend
+NKRO_ENABLE = yes		    # USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+# BACKLIGHT_ENABLE = yes	# Enable keyboard backlight functionality
+# MIDI_ENABLE = YES		# MIDI controls
+# UNICODE_ENABLE = YES		# Unicode
+# BLUETOOTH_ENABLE = yes	# Enable Bluetooth with the Adafruit EZ-Key HID
+RGBLIGHT_ENABLE = no    # Enable RGB Underglow
+
+ifndef QUANTUM_DIR
+	include ../../../../Makefile
+endif

keyboards/gh60/keymaps/robotmaxtron/rules.mk

@@ -0,0 +1,112 @@
+#----------------------------------------------------------------------------
+# On command line:
+#
+# make all = Make software.
+#
+# make clean = Clean out built project files.
+#
+# make coff = Convert ELF to AVR COFF.
+#
+# make extcoff = Convert ELF to AVR Extended COFF.
+#
+# make program = Download the hex file to the device.
+#                Please customize your programmer settings(PROGRAM_CMD)
+#
+# make teensy = Download the hex file to the device, using teensy_loader_cli.
+#               (must have teensy_loader_cli installed).
+#
+# make dfu = Download the hex file to the device, using dfu-programmer (must
+#            have dfu-programmer installed).
+#
+# make flip = Download the hex file to the device, using Atmel FLIP (must
+#             have Atmel FLIP installed).
+#
+# make dfu-ee = Download the eeprom file to the device, using dfu-programmer
+#               (must have dfu-programmer installed).
+#
+# make flip-ee = Download the eeprom file to the device, using Atmel FLIP
+#                (must have Atmel FLIP installed).
+#
+# make debug = Start either simulavr or avarice as specified for debugging, 
+#              with avr-gdb or avr-insight as the front end for debugging.
+#
+# make filename.s = Just compile filename.c into the assembler code only.
+#
+# make filename.i = Create a preprocessed source file for use in submitting
+#                   bug reports to the GCC project.
+#
+# To rebuild project do "make clean" then "make all".
+#----------------------------------------------------------------------------
+
+# MCU name
+#MCU = at90usb1287
+MCU = atmega32u4
+
+# Processor frequency.
+#     This will define a symbol, F_CPU, in all source code files equal to the
+#     processor frequency in Hz. You can then use this symbol in your source code to
+#     calculate timings. Do NOT tack on a 'UL' at the end, this will be done
+#     automatically to create a 32-bit value in your source code.
+#
+#     This will be an integer division of F_USB below, as it is sourced by
+#     F_USB after it has run through any CPU prescalers. Note that this value
+#     does not *change* the processor frequency - it should merely be updated to
+#     reflect the processor speed set externally so that the code can use accurate
+#     software delays.
+F_CPU = 16000000
+
+
+#
+# LUFA specific
+#
+# Target architecture (see library "Board Types" documentation).
+ARCH = AVR8
+
+# Input clock frequency.
+#     This will define a symbol, F_USB, in all source code files equal to the
+#     input clock frequency (before any prescaling is performed) in Hz. This value may
+#     differ from F_CPU if prescaling is used on the latter, and is required as the
+#     raw input clock is fed directly to the PLL sections of the AVR for high speed
+#     clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
+#     at the end, this will be done automatically to create a 32-bit value in your
+#     source code.
+#
+#     If no clock division is performed on the input clock inside the AVR (via the
+#     CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
+F_USB = $(F_CPU)
+
+# Interrupt driven control endpoint task(+60)
+OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
+
+
+# Boot Section Size in *bytes*
+#   Teensy halfKay   512
+#   Teensy++ halfKay 1024
+#   Atmel DFU loader 4096
+#   LUFA bootloader  4096
+#   USBaspLoader     2048
+OPT_DEFS += -DBOOTLOADER_SIZE=4096
+
+
+# Build Options
+#   comment out to disable the options.
+#
+BOOTMAGIC_ENABLE = yes		# Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE = yes		# Mouse keys(+4700)
+EXTRAKEY_ENABLE = yes		# Audio control and System control(+450)
+# CONSOLE_ENABLE = yes		# Console for debug(+400)
+# COMMAND_ENABLE = yes		# Commands for debug and configuration
+KEYBOARD_LOCK_ENABLE = yes	# Allow locking of keyboard via magic key
+# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
+# SLEEP_LED_ENABLE = yes	# Breathing sleep LED during USB suspend
+NKRO_ENABLE = yes		# USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+# BACKLIGHT_ENABLE = yes	# Enable keyboard backlight functionality
+# MIDI_ENABLE = YES		# MIDI controls
+# UNICODE_ENABLE = YES		# Unicode
+# BLUETOOTH_ENABLE = yes	# Enable Bluetooth with the Adafruit EZ-Key HID
+RGBLIGHT_ENABLE = yes          # Enable RGB Underglow
+
+ifndef QUANTUM_DIR
+	include ../../../../Makefile
+endif
+

keyboards/gh60/keymaps/sethbc/rules.mk

@@ -0,0 +1,3 @@
+ifndef QUANTUM_DIR
+	include ../../../../Makefile
+endif

keyboards/gherkin/keymaps/mjt/rules.mk

@@ -0,0 +1,29 @@
+## not sure where this stuff goes ##
+MCU = atmega32u4
+F_CPU = 16000000
+ARCH = AVR8
+F_USB = $(F_CPU)
+OPT_DEFS += -DBOOTLOADER_SIZE=4096
+
+# Build Options
+#   change to "no" to disable the options, or define them in the Makefile in
+#   the appropriate keymap folder that will get included automatically
+#
+BOOTMAGIC_ENABLE = no       # Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE = yes       # Mouse keys(+4700)
+EXTRAKEY_ENABLE = yes       # Audio control and System control(+450)
+CONSOLE_ENABLE = no         # Console for debug(+400)
+COMMAND_ENABLE = yes        # Commands for debug and configuration
+NKRO_ENABLE = yes           # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+BACKLIGHT_ENABLE = yes      # Enable keyboard backlight functionality
+MIDI_ENABLE = no            # MIDI controls
+AUDIO_ENABLE = yes           # Audio output on port C6
+UNICODE_ENABLE = no         # Unicode
+BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
+RGBLIGHT_ENABLE = no        # Enable WS2812 RGB underlight.  Do not enable this with audio at the same time.
+SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
+TAP_DANCE_ENABLE=yes
+
+ifndef QUANTUM_DIR
+	include ../../../../Makefile
+endif

keyboards/gherkin/keymaps/steno/rules.mk

@@ -0,0 +1,16 @@
+ifndef QUANTUM_DIR
+  include ../../../../Makefile
+endif
+
+STENO_ENABLE = yes          # Additional protocols for Stenography(+1700), requires VIRTSER
+
+BOOTMAGIC_ENABLE = no  # Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE = no   # Mouse keys(+4700)
+EXTRAKEY_ENABLE = no   # Audio control and System control(+450)
+CONSOLE_ENABLE = no    # Console for debug(+400)
+COMMAND_ENABLE = no    # Commands for debug and configuration
+SLEEP_LED_ENABLE = no  # Breathing sleep LED during USB suspend
+NKRO_ENABLE = no       # USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+BACKLIGHT_ENABLE = no  # Enable keyboard backlight functionality
+AUDIO_ENABLE = no
+RGBLIGHT_ENABLE = no

keyboards/gherkin/keymaps/talljoe/rules.mk

@@ -0,0 +1,6 @@
+ifndef QUANTUM_DIR
+  include ../../../../Makefile
+endif
+
+MOUSEKEY_ENABLE = no        # Mouse keys(+4700)
+STENO_ENABLE = yes          # Additional protocols for Stenography(+1700), requires VIRTSER

keyboards/gonnerd/keymaps/default/rules.mk

@@ -0,0 +1,21 @@
+# Build Options
+#   change to "no" to disable the options, or define them in the Makefile in
+#   the appropriate keymap folder that will get included automatically
+#
+BOOTMAGIC_ENABLE = no       # Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE = yes       # Mouse keys(+4700)
+EXTRAKEY_ENABLE = yes       # Audio control and System control(+450)
+CONSOLE_ENABLE = no         # Console for debug(+400)
+COMMAND_ENABLE = yes        # Commands for debug and configuration
+NKRO_ENABLE = yes           # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality
+MIDI_ENABLE = no            # MIDI controls
+AUDIO_ENABLE = no           # Audio output on port C6
+UNICODE_ENABLE = no         # Unicode
+BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
+RGBLIGHT_ENABLE = no        # Enable WS2812 RGB underlight.  Do not enable this with audio at the same time.
+SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
+
+ifndef QUANTUM_DIR
+	include ../../../../Makefile
+endif

keyboards/gonnerd/keymaps/mauin/rules.mk

@@ -0,0 +1,21 @@
+# Build Options
+#   change to "no" to disable the options, or define them in the Makefile in
+#   the appropriate keymap folder that will get included automatically
+#
+BOOTMAGIC_ENABLE = no       # Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE = yes       # Mouse keys(+4700)
+EXTRAKEY_ENABLE = yes       # Audio control and System control(+450)
+CONSOLE_ENABLE = no         # Console for debug(+400)
+COMMAND_ENABLE = yes        # Commands for debug and configuration
+NKRO_ENABLE = yes           # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality
+MIDI_ENABLE = no            # MIDI controls
+AUDIO_ENABLE = no           # Audio output on port C6
+UNICODE_ENABLE = no         # Unicode
+BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
+RGBLIGHT_ENABLE = no        # Enable WS2812 RGB underlight.  Do not enable this with audio at the same time.
+SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
+
+ifndef QUANTUM_DIR
+	include ../../../../Makefile
+endif

keyboards/gonnerd/keymaps/tkl/rules.mk

@@ -0,0 +1,21 @@
+# Build Options
+#   change to "no" to disable the options, or define them in the Makefile in
+#   the appropriate keymap folder that will get included automatically
+#
+BOOTMAGIC_ENABLE = no       # Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE = yes       # Mouse keys(+4700)
+EXTRAKEY_ENABLE = yes       # Audio control and System control(+450)
+CONSOLE_ENABLE = yes        # Console for debug(+400)
+COMMAND_ENABLE = yes        # Commands for debug and configuration
+NKRO_ENABLE = yes           # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality
+MIDI_ENABLE = no            # MIDI controls
+AUDIO_ENABLE = no           # Audio output on port C6
+UNICODE_ENABLE = no         # Unicode
+BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
+RGBLIGHT_ENABLE = no        # Enable WS2812 RGB underlight.  Do not enable this with audio at the same time.
+SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
+
+ifndef QUANTUM_DIR
+	include ../../../../Makefile
+endif

keyboards/hadron/keymaps/default/rules.mk

@@ -0,0 +1,26 @@
+
+
+# Build Options
+#   change to "no" to disable the options, or define them in the Makefile in 
+#   the appropriate keymap folder that will get included automatically
+#
+BOOTMAGIC_ENABLE = no       # Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE = yes      # Mouse keys(+4700)
+EXTRAKEY_ENABLE = no       # Audio control and System control(+450)
+CONSOLE_ENABLE = no         # Console for debug(+400)
+COMMAND_ENABLE = no        # Commands for debug and configuration
+NKRO_ENABLE = yes            # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+BACKLIGHT_ENABLE = no      # Enable keyboard backlight functionality
+MIDI_ENABLE = no            # MIDI controls
+AUDIO_ENABLE = no           # Audio output on port C6
+UNICODE_ENABLE = no         # Unicode
+BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
+RGBLIGHT_ENABLE = yes        # Enable WS2812 RGB underlight.  Do not enable this with audio at the same time.
+ONEHAND_ENABLE = no        # Enable one-hand typing
+
+# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
+SLEEP_LED_ENABLE = no    # Breathing sleep LED during USB suspend
+
+ifndef QUANTUM_DIR
+	include ../../../../Makefile
+endif

keyboards/hadron/keymaps/side_numpad/rules.mk

@@ -0,0 +1,26 @@
+
+
+# Build Options
+#   change to "no" to disable the options, or define them in the Makefile in 
+#   the appropriate keymap folder that will get included automatically
+#
+BOOTMAGIC_ENABLE = no       # Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE = yes      # Mouse keys(+4700)
+EXTRAKEY_ENABLE = yes       # Audio control and System control(+450)
+CONSOLE_ENABLE = no         # Console for debug(+400)
+COMMAND_ENABLE = no        # Commands for debug and configuration
+NKRO_ENABLE = yes            # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+BACKLIGHT_ENABLE = no      # Enable keyboard backlight functionality
+MIDI_ENABLE = yes            # MIDI controls
+AUDIO_ENABLE = no           # Audio output on port C6
+UNICODE_ENABLE = no         # Unicode
+BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
+RGBLIGHT_ENABLE = yes        # Enable WS2812 RGB underlight.  Do not enable this with audio at the same time.
+ONEHAND_ENABLE = no        # Enable one-hand typing
+
+# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
+SLEEP_LED_ENABLE = no    # Breathing sleep LED during USB suspend
+
+ifndef QUANTUM_DIR
+	include ../../../../Makefile
+endif

keyboards/hadron/subproject.mk

@@ -0,0 +1 @@
+SUBPROJECT_DEFAULT = ver2

keyboards/handwired/MS_sculpt_mobile/keymaps/default/rules.mk

@@ -0,0 +1,17 @@
+# Build Options
+#   change to "no" to disable the options, or define them in the Makefile in 
+#   the appropriate keymap folder that will get included automatically
+#
+BOOTMAGIC_ENABLE = no       # Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE = yes       # Mouse keys(+4700)
+EXTRAKEY_ENABLE = yes       # Audio control and System control(+450)
+CONSOLE_ENABLE = no         # Console for debug(+400)
+COMMAND_ENABLE = yes        # Commands for debug and configuration
+NKRO_ENABLE = yes           # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality
+MIDI_ENABLE = no            # MIDI controls
+AUDIO_ENABLE = no           # Audio output on port C6
+UNICODE_ENABLE = no         # Unicode
+BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
+RGBLIGHT_ENABLE = no        # Enable WS2812 RGB underlight.  Do not enable this with audio at the same time.
+SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend

keyboards/handwired/MS_sculpt_mobile/keymaps/milestogo/rules.mk

@@ -0,0 +1,17 @@
+# Build Options
+#   change to "no" to disable the options, or define them in the Makefile in 
+#   the appropriate keymap folder that will get included automatically
+#
+BOOTMAGIC_ENABLE = no       # Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE = yes       # Mouse keys(+4700)
+EXTRAKEY_ENABLE = yes       # Audio control and System control(+450)
+CONSOLE_ENABLE = no         # Console for debug(+400)
+COMMAND_ENABLE = yes        # Commands for debug and configuration
+NKRO_ENABLE = yes           # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality
+MIDI_ENABLE = no            # MIDI controls
+AUDIO_ENABLE = no          # Audio output on port C6
+UNICODE_ENABLE = no         # Unicode
+BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
+RGBLIGHT_ENABLE = no        # Enable WS2812 RGB underlight.  Do not enable this with audio at the same time.
+SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend

keyboards/handwired/arrow_pad/keymaps/pad_21/rules.mk

@@ -0,0 +1,17 @@
+BOOTMAGIC_ENABLE = yes # Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE  = no  # Mouse keys(+4700)
+EXTRAKEY_ENABLE  = no  # Audio control and System control(+450)
+CONSOLE_ENABLE   = no  # Console for debug(+400)
+COMMAND_ENABLE   = yes # Commands for debug and configuration
+NKRO_ENABLE      = yes # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+BACKLIGHT_ENABLE = no  # Enable keyboard backlight functionality
+MIDI_ENABLE      = no  # MIDI controls
+AUDIO_ENABLE     = no  # Audio output on port C6
+UNICODE_ENABLE   = no  # Unicode
+BLUETOOTH_ENABLE = no  # Enable Bluetooth with the Adafruit EZ-Key HID
+RGBLIGHT_ENABLE  = no  # Enable WS2812 RGB underlight.  Do not enable this with audio at the same time.
+
+# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
+SLEEP_LED_ENABLE = no  # Breathing sleep LED during USB suspend
+
+CONFIG_H = keymaps/$(KEYMAP)/config.h

keyboards/handwired/arrow_pad/keymaps/pad_24/rules.mk

@@ -0,0 +1,17 @@
+BOOTMAGIC_ENABLE = yes # Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE  = no  # Mouse keys(+4700)
+EXTRAKEY_ENABLE  = no  # Audio control and System control(+450)
+CONSOLE_ENABLE   = no  # Console for debug(+400)
+COMMAND_ENABLE   = yes # Commands for debug and configuration
+NKRO_ENABLE      = yes # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality
+MIDI_ENABLE      = no  # MIDI controls
+AUDIO_ENABLE     = no  # Audio output on port C6
+UNICODE_ENABLE   = no  # Unicode
+BLUETOOTH_ENABLE = no  # Enable Bluetooth with the Adafruit EZ-Key HID
+RGBLIGHT_ENABLE  = no  # Enable WS2812 RGB underlight.  Do not enable this with audio at the same time.
+
+# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
+SLEEP_LED_ENABLE = no  # Breathing sleep LED during USB suspend
+
+CONFIG_H = keymaps/$(KEYMAP)/config.h

keyboards/handwired/atreus50/keymaps/default/rules.mk

@@ -0,0 +1,2 @@
+RGBLIGHT_ENABLE = yes
+AUDIO_ENABLE = no

keyboards/handwired/kbod/keymaps/default/rules.mk

@@ -0,0 +1,17 @@
+# Build Options
+#   change to "no" to disable the options, or define them in the Makefile in 
+#   the appropriate keymap folder that will get included automatically
+#
+BOOTMAGIC_ENABLE = no       # Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE = yes       # Mouse keys(+4700)
+EXTRAKEY_ENABLE = yes       # Audio control and System control(+450)
+CONSOLE_ENABLE = no         # Console for debug(+400)
+COMMAND_ENABLE = no         # Commands for debug and configuration
+NKRO_ENABLE = yes           # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality
+MIDI_ENABLE = no            # MIDI controls
+AUDIO_ENABLE = no           # Audio output on port C6
+UNICODE_ENABLE = no         # Unicode
+BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
+RGBLIGHT_ENABLE = no        # Enable WS2812 RGB underlight.  Do not enable this with audio at the same time.
+SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend

keyboards/handwired/minorca/keymaps/default/rules.mk

@@ -0,0 +1,21 @@
+
+
+# Build Options
+#   change to "no" to disable the options, or define them in the Makefile in 
+#   the appropriate keymap folder that will get included automatically
+#
+BOOTMAGIC_ENABLE = yes      # Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE = yes       # Mouse keys(+4700)
+EXTRAKEY_ENABLE = yes       # Audio control and System control(+450)
+CONSOLE_ENABLE = no         # Console for debug(+400)
+COMMAND_ENABLE = yes        # Commands for debug and configuration
+NKRO_ENABLE = yes           # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality
+MIDI_ENABLE = no            # MIDI controls
+AUDIO_ENABLE = no           # Audio output on port C6
+UNICODE_ENABLE = no         # Unicode
+BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
+RGBLIGHT_ENABLE = no        # Enable WS2812 RGB underlight.  Do not enable this with audio at the same time.
+
+# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
+SLEEP_LED_ENABLE = no    # Breathing sleep LED during USB suspend

keyboards/handwired/minorca/keymaps/rgb/rules.mk

@@ -0,0 +1,21 @@
+
+
+# Build Options
+#   change to "no" to disable the options, or define them in the Makefile in 
+#   the appropriate keymap folder that will get included automatically
+#
+BOOTMAGIC_ENABLE = yes      # Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE = yes       # Mouse keys(+4700)
+EXTRAKEY_ENABLE = yes       # Audio control and System control(+450)
+CONSOLE_ENABLE = no         # Console for debug(+400)
+COMMAND_ENABLE = yes        # Commands for debug and configuration
+NKRO_ENABLE = yes           # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality
+MIDI_ENABLE = no            # MIDI controls
+AUDIO_ENABLE = no           # Audio output on port C6
+UNICODE_ENABLE = no         # Unicode
+BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
+RGBLIGHT_ENABLE = yes       # Enable WS2812 RGB underlight.  Do not enable this with audio at the same time.
+
+# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
+SLEEP_LED_ENABLE = no    # Breathing sleep LED during USB suspend

keyboards/handwired/pilcrow/keymaps/default/rules.mk

@@ -0,0 +1,17 @@
+# Build Options
+#   change to "no" to disable the options, or define them in the Makefile in 
+#   the appropriate keymap folder that will get included automatically
+#
+BOOTMAGIC_ENABLE = no       # Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE = yes       # Mouse keys(+4700)
+EXTRAKEY_ENABLE = yes       # Audio control and System control(+450)
+CONSOLE_ENABLE = no         # Console for debug(+400)
+COMMAND_ENABLE = yes        # Commands for debug and configuration
+NKRO_ENABLE = yes           # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality
+MIDI_ENABLE = no            # MIDI controls
+AUDIO_ENABLE = no           # Audio output on port C6
+UNICODE_ENABLE = no         # Unicode
+BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
+RGBLIGHT_ENABLE = no        # Enable WS2812 RGB underlight.  Do not enable this with audio at the same time.
+SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend

keyboards/handwired/promethium/keymaps/priyadi/rules.mk

@@ -0,0 +1,26 @@
+
+
+# Build Options
+#   change to "no" to disable the options, or define them in the Makefile in 
+#   the appropriate keymap folder that will get included automatically
+#
+BOOTMAGIC_ENABLE = no       # Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE = no        # Mouse keys(+4700)
+EXTRAKEY_ENABLE = yes       # Audio control and System control(+450)
+CONSOLE_ENABLE = no         # Console for debug(+400)
+COMMAND_ENABLE = no         # Commands for debug and configuration
+NKRO_ENABLE = yes           # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality
+MIDI_ENABLE = no            # MIDI controls
+AUDIO_ENABLE = no           # Audio output on port C6
+UNICODE_ENABLE = no         # Unicode
+UNICODEMAP_ENABLE = yes
+BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
+RGBLIGHT_ENABLE = no        # Enable WS2812 RGB underlight.  Do not enable this with audio at the same time.
+PS2_MOUSE_ENABLE = yes
+PS2_USE_INT = yes
+FAUXCLICKY_ENABLE = yes
+BLUETOOTH = AdafruitBLE
+
+# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
+SLEEP_LED_ENABLE = no    # Breathing sleep LED during USB suspend

keyboards/hhkb/keymaps/blakedietz/rules.mk

@@ -0,0 +1,2 @@
+TAP_DANCE_ENABLE = no
+UNICODE_ENABLE   = no

keyboards/hhkb/keymaps/cinaeco/rules.mk

@@ -0,0 +1,23 @@
+# cinaeco's HHKB firmware
+
+# Build Options
+#   change to "no" to disable the options, or define them in the Makefile in
+#   the appropriate keymap folder that will get included automatically
+#
+BOOTMAGIC_ENABLE = no       # Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE = yes       # Mouse keys(+4700)
+EXTRAKEY_ENABLE = yes       # Audio control and System control(+450)
+CONSOLE_ENABLE = no         # Console for debug(+400)
+COMMAND_ENABLE = yes        # Commands for debug and configuration
+NKRO_ENABLE = yes           # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+BACKLIGHT_ENABLE = yes      # Enable keyboard backlight functionality
+MIDI_ENABLE = no            # MIDI controls
+AUDIO_ENABLE = no           # Audio output on port C6
+UNICODE_ENABLE = no         # Unicode
+BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
+RGBLIGHT_ENABLE = no        # Enable WS2812 RGB underlight.  Do not enable this with audio at the same time.
+SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
+
+ifndef QUANTUM_DIR
+	include ../../../../Makefile
+endif

keyboards/hhkb/keymaps/jp/rules.mk

@@ -0,0 +1 @@
+OPT_DEFS += -DHHKB_JP

keyboards/hhkb/keymaps/jp_mac/rules.mk

@@ -0,0 +1 @@
+OPT_DEFS += -DHHKB_JP

keyboards/hhkb/keymaps/rdg_jp/rules.mk

@@ -0,0 +1 @@
+OPT_DEFS += -DHHKB_JP

keyboards/hhkb/keymaps/sh_jp/rules.mk

@@ -0,0 +1 @@
+OPT_DEFS += -DHHKB_JP

keyboards/hhkb/keymaps/shela/rules.mk

@@ -0,0 +1 @@
+SRC += action_pseudo_lut.c

keyboards/infinity60/keymaps/jpetermans/rules.mk

@@ -0,0 +1,4 @@
+
+ifndef QUANTUM_DIR
+	include ../../../../Makefile
+endif

keyboards/jd40/keymaps/vanagon/rules.mk

@@ -0,0 +1,3 @@
+ifndef QUANTUM_DIR
+        include ../../../../Makefile
+endif

keyboards/jd45/keymaps/mjt/rules.mk

@@ -1,67 +1,17 @@
-
-
-# MCU name
-#MCU = at90usb1287
-MCU = atmega32u4
-
-# Processor frequency.
-#     This will define a symbol, F_CPU, in all source code files equal to the
-#     processor frequency in Hz. You can then use this symbol in your source code to
-#     calculate timings. Do NOT tack on a 'UL' at the end, this will be done
-#     automatically to create a 32-bit value in your source code.
-#
-#     This will be an integer division of F_USB below, as it is sourced by
-#     F_USB after it has run through any CPU prescalers. Note that this value
-#     does not *change* the processor frequency - it should merely be updated to
-#     reflect the processor speed set externally so that the code can use accurate
-#     software delays.
-F_CPU = 16000000
-
-
-#
-# LUFA specific
-#
-# Target architecture (see library "Board Types" documentation).
-ARCH = AVR8
-
-# Input clock frequency.
-#     This will define a symbol, F_USB, in all source code files equal to the
-#     input clock frequency (before any prescaling is performed) in Hz. This value may
-#     differ from F_CPU if prescaling is used on the latter, and is required as the
-#     raw input clock is fed directly to the PLL sections of the AVR for high speed
-#     clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
-#     at the end, this will be done automatically to create a 32-bit value in your
-#     source code.
-#
-#     If no clock division is performed on the input clock inside the AVR (via the
-#     CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
-F_USB = $(F_CPU)
-
-# Interrupt driven control endpoint task(+60)
-OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
-
-
-# Boot Section Size in *bytes*
-#   Teensy halfKay   512
-#   Teensy++ halfKay 1024
-#   Atmel DFU loader 4096
-#   LUFA bootloader  4096
-#   USBaspLoader     2048
-OPT_DEFS += -DBOOTLOADER_SIZE=4096
-
-
 # Build Options
-#   comment out to disable the options.
+#   change to "no" to disable the options, or define them in the Makefile in
+#   the appropriate keymap folder that will get included automatically
 #
-BOOTMAGIC_ENABLE = yes	# Virtual DIP switch configuration(+1000)
-MOUSEKEY_ENABLE = yes	# Mouse keys(+4700)
-EXTRAKEY_ENABLE = yes	# Audio control and System control(+450)
-CONSOLE_ENABLE = yes	# Console for debug(+400)
-COMMAND_ENABLE = yes    # Commands for debug and configuration
-# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
-SLEEP_LED_ENABLE = no  # Breathing sleep LED during USB suspend
-NKRO_ENABLE = yes		# USB Nkey Rollover - not yet supported in LUFA
-BACKLIGHT_ENABLE = yes  # Enable keyboard backlight functionality
-MIDI_ENABLE = no 		# MIDI controls
-# UNICODE_ENABLE = YES 		# Unicode
-BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
+BOOTMAGIC_ENABLE = no       # Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE = yes       # Mouse keys(+4700)
+EXTRAKEY_ENABLE = yes       # Audio control and System control(+450)
+CONSOLE_ENABLE = no         # Console for debug(+400)
+COMMAND_ENABLE = yes        # Commands for debug and configuration
+NKRO_ENABLE = yes           # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+BACKLIGHT_ENABLE = yes      # Enable keyboard backlight functionality
+MIDI_ENABLE = no            # MIDI controls
+AUDIO_ENABLE = no           # Audio output on port C6
+UNICODE_ENABLE = no         # Unicode
+BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
+RGBLIGHT_ENABLE = no        # Enable WS2812 RGB underlight.  Do not enable this with audio at the same time.
+SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend

keyboards/jd45/keymaps/mjt6u/rules.mk

@@ -0,0 +1,23 @@
+# Build Options
+#   change to "no" to disable the options, or define them in the Makefile in
+#   the appropriate keymap folder that will get included automatically
+#
+BOOTMAGIC_ENABLE = no       # Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE = no        # Mouse keys(+4700)
+EXTRAKEY_ENABLE = yes       # Audio control and System control(+450)
+CONSOLE_ENABLE = yes        # Console for debug(+400)
+COMMAND_ENABLE = yes        # Commands for debug and configuration
+NKRO_ENABLE = yes           # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality
+MIDI_ENABLE = no            # MIDI controls
+AUDIO_ENABLE = no           # Audio output on port C6
+UNICODE_ENABLE = no         # Unicode
+BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
+RGBLIGHT_ENABLE = no        # Enable WS2812 RGB underlight.  Do not enable this with audio at the same time.
+SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
+
+DEBUG_ENABLE = yes
+
+ifndef QUANTUM_DIR
+	include ../../../../Makefile
+endif

keyboards/kc60/keymaps/stanleylai/rules.mk

@@ -0,0 +1,25 @@
+
+
+# Build Options
+#   change yes to no to disable
+#
+BOOTMAGIC_ENABLE = yes      # Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE = no        # Mouse keys(+4700)
+EXTRAKEY_ENABLE = yes       # Audio control and System control(+450)
+CONSOLE_ENABLE = no         # Console for debug(+400)
+COMMAND_ENABLE = no         # Commands for debug and configuration
+KEYBOARD_LOCK_ENABLE = yes  # Allow locking of keyboard via magic key
+BACKLIGHT_ENABLE = yes      # Enable keyboard backlight functionality
+RGBLIGHT_ENABLE = yes 			 # Enable WS2812 underglow RGB strip
+MIDI_ENABLE = no            # MIDI controls
+UNICODE_ENABLE = no         # Unicode
+BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
+AUDIO_ENABLE = no           # Audio output on port C6
+# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
+SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
+# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+NKRO_ENABLE = yes           # USB Nkey Rollover
+
+ifndef QUANTUM_DIR
+	include ../../../../Makefile
+endif

keyboards/kc60/keymaps/wigguno/rules.mk

@@ -0,0 +1,24 @@
+
+
+# Build Options
+#   change yes to no to disable
+#
+BOOTMAGIC_ENABLE = yes      # Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE = no        # Mouse keys(+4700)
+EXTRAKEY_ENABLE = yes       # Audio control and System control(+450)
+CONSOLE_ENABLE = no         # Console for debug(+400)
+COMMAND_ENABLE = no         # Commands for debug and configuration
+KEYBOARD_LOCK_ENABLE = yes  # Allow locking of keyboard via magic key
+# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
+SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
+# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+NKRO_ENABLE = yes           # USB Nkey Rollover
+BACKLIGHT_ENABLE = yes      # Enable keyboard backlight functionality
+MIDI_ENABLE = no            # MIDI controls
+UNICODE_ENABLE = no         # Unicode
+BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
+AUDIO_ENABLE = no           # Audio output on port C6
+
+ifndef QUANTUM_DIR
+	include ../../../../Makefile
+endif

keyboards/kc60/keymaps/ws2812/rules.mk

@@ -0,0 +1,25 @@
+
+
+# Build Options
+#   change yes to no to disable
+#
+BOOTMAGIC_ENABLE = yes      # Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE = yes       # Mouse keys(+4700)
+EXTRAKEY_ENABLE = yes       # Audio control and System control(+450)
+CONSOLE_ENABLE = yes        # Console for debug(+400)
+COMMAND_ENABLE = yes        # Commands for debug and configuration
+KEYBOARD_LOCK_ENABLE = yes  # Allow locking of keyboard via magic key
+BACKLIGHT_ENABLE = yes      # Enable keyboard backlight functionality
+RGBLIGHT_ENABLE = yes 			 # Enable WS2812 underglow RGB strip
+MIDI_ENABLE = no            # MIDI controls
+UNICODE_ENABLE = no         # Unicode
+BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
+AUDIO_ENABLE = no           # Audio output on port C6
+# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
+SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
+# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+NKRO_ENABLE = no            # USB Nkey Rollover
+
+ifndef QUANTUM_DIR
+	include ../../../../Makefile
+endif

keyboards/kinesis/keymaps/default/rules.mk

@@ -0,0 +1,21 @@
+# Build Options
+#   change to "no" to disable the options, or define them in the Makefile in 
+#   the appropriate keymap folder that will get included automatically
+#
+BOOTMAGIC_ENABLE = no       # Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE = yes       # Mouse keys(+4700)
+EXTRAKEY_ENABLE = yes       # Audio control and System control(+450)
+CONSOLE_ENABLE = no         # Console for debug(+400)
+COMMAND_ENABLE = yes        # Commands for debug and configuration
+NKRO_ENABLE = yes           # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality
+MIDI_ENABLE = no            # MIDI controls
+AUDIO_ENABLE = no           # Audio output on port C6
+UNICODE_ENABLE = no         # Unicode
+BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
+RGBLIGHT_ENABLE = no        # Enable WS2812 RGB underlight.  Do not enable this with audio at the same time.
+SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
+
+ifndef QUANTUM_DIR
+	include ../../../../Makefile
+endif

keyboards/kinesis/keymaps/dvorak/rules.mk

@@ -0,0 +1,21 @@
+# Build Options
+#   change to "no" to disable the options, or define them in the Makefile in 
+#   the appropriate keymap folder that will get included automatically
+#
+BOOTMAGIC_ENABLE = no       # Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE = yes       # Mouse keys(+4700)
+EXTRAKEY_ENABLE = yes       # Audio control and System control(+450)
+CONSOLE_ENABLE = no         # Console for debug(+400)
+COMMAND_ENABLE = yes        # Commands for debug and configuration
+NKRO_ENABLE = yes           # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality
+MIDI_ENABLE = no            # MIDI controls
+AUDIO_ENABLE = no           # Audio output on port C6
+UNICODE_ENABLE = no         # Unicode
+BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
+RGBLIGHT_ENABLE = no        # Enable WS2812 RGB underlight.  Do not enable this with audio at the same time.
+SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
+
+ifndef QUANTUM_DIR
+	include ../../../../Makefile
+endif