qmk_firmware/keyboards/ymd75/readme.md
Erovia ad86894ae7
Rename keyboard-level readmes to lower-case ()
This is the recommendation in the [PR
Checklist](https://docs.qmk.fm/#/pr_checklist?id=keyboard-prs) and it
will make working with them easier in the CLI/API/etc.
2020-10-25 15:23:42 +00:00

23 lines
1.1 KiB
Markdown

# YMD75 / MT84
75% keyboard from YMDK. YMDK sell the board and name it "YMD75", however revision 1 of the PCB has "MT84" printed on both sides.
* Keyboard Maintainer: [Wayne K Jones](github.com/WarmCatUK)
* Hardware Supported:
- rev1 (ATmega32a)
- rev2 (ATmega32a)
- rev3 (ATmega32u4)
* Hardware Availability: <https://www.aliexpress.com/item/32812690592.html>
Make example for this keyboard (after setting up your build environment):
make ymd75/rev1:default
Flashing example for this keyboard ([after setting up the bootloadHID flashing environment](https://docs.qmk.fm/#/flashing_bootloadhid))
make ymd75/rev1:default:flash
**Reset Key**: Hold down the key located at *Key below the top right key*, commonly programmed as *Backspace* while plugging in the keyboard. On PCB revision 2, enter the bootloader by holding `L_CTRL` while plugging in the keyboard.
See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).