704934c427
* Add my own keymap * Layer 0: Workman * Layer 1: RSTHD (my own take on it) * Layer 2: Mouse * Layer 3: Navigation * Layer 4: Symbols right * Layer 5: Symbols left * Layer 6: Fn keys * Layer 7: Numbers * Layer 8: Vim and misceallaneaous accessible from any other layer * Move the current code to a 0.1 folder in preparation for upcoming changes Version 0.2 is currently being prototyped and uses an arm chip which will need its own firmware. There is also the Ferris sweep which uses a pro-micro compatible board which will need its own directory. * Move Ferris out of handwired and into the light The keyboard is now well out of the prototype phase as tens of them have been produced and acquired by various people. With 0.2 coming out, adoption is going to increase again as the board will be available for sale at some recognized vendors. Now is probably a good time to recognize its status as more than a prototype :) * Add code for the Ferris Sweep (a.k.a cradio) The Ferris Sweep is a creation of the talented @davidphilipbarr, a.k.a DPB. It has the key layout of a Ferris and uses a pro-micro connected to the switches via direct pins so that diodes are not needed and the soldering is minimal. With their blessing, I took the code for it from DPB's own repo: https://github.com/davidphilipbarr/36keys/tree/master/qmk/cradio and did some adaptations such as removing commented out code, enabling EE_HANDS and mouse keys for consistency with my existing Ferris code. * Fix indentation in rules.mk * Fix indentation in sweep's config * Remove unnecessary lines from sweep's rules.mk * Remove unnecessary lines from sweep's rules.mk * Rename 0.1 to 0_1 This avoids the dot looking like the separation between a filename and its extension. In the same commit, bring matrix.c to the 0_1 folder as this was needed for the code to compile properly (matrix.c is referred to in the readme under `0_1` and is specific to that revision of the firmware). * Update copyright statements for Sweep |
||
---|---|---|
.github | ||
.vscode | ||
bin | ||
docs | ||
drivers | ||
keyboards | ||
layouts | ||
lib | ||
platforms/chibios | ||
quantum | ||
tests | ||
tmk_core | ||
users | ||
util | ||
.clang-format | ||
.editorconfig | ||
.gitattributes | ||
.gitignore | ||
.gitmodules | ||
.travis.yml | ||
book.json | ||
bootloader.mk | ||
build_full_test.mk | ||
build_json.mk | ||
build_keyboard.mk | ||
build_layout.mk | ||
build_test.mk | ||
CODE_OF_CONDUCT.md | ||
common_features.mk | ||
common.mk | ||
Dockerfile | ||
Doxyfile | ||
doxygen-todo | ||
LICENSE | ||
license_GPLv2.md | ||
license_GPLv3.md | ||
license_Modified_BSD.md | ||
Makefile | ||
message.mk | ||
nose2.cfg | ||
readme.md | ||
requirements-dev.txt | ||
requirements.txt | ||
secrets.tar.enc | ||
setup.cfg | ||
shell.nix | ||
show_options.mk | ||
testlist.mk | ||
Vagrantfile |
Quantum Mechanical Keyboard Firmware
This is a keyboard firmware based on the tmk_keyboard firmware with some useful features for Atmel AVR and ARM controllers, and more specifically, the OLKB product line, the ErgoDox EZ keyboard, and the Clueboard product line.
Documentation
The docs are powered by Docsify and hosted on GitHub. They are also viewable offline; see Previewing the Documentation for more details.
You can request changes by making a fork and opening a pull request, or by clicking the "Edit this page" link at the bottom of any page.
Supported Keyboards
The project also includes community support for lots of other keyboards.
Maintainers
QMK is developed and maintained by Jack Humbert of OLKB with contributions from the community, and of course, Hasu. The OLKB product firmwares are maintained by Jack Humbert, the Ergodox EZ by ZSA Technology Labs, the Clueboard by Zach White, and the Atreus by Phil Hagelberg.
Official Website
qmk.fm is the official website of QMK, where you can find links to this page, the documentation, and the keyboards supported by QMK.