318 lines
11 KiB
Markdown
318 lines
11 KiB
Markdown
# Audio
|
|
|
|
Your keyboard can make sounds! If you've got a Planck, Preonic, or basically any AVR keyboard that allows access to certain PWM-capable pins, you can hook up a simple speaker and make it beep. You can use those beeps to indicate layer transitions, modifiers, special keys, or just to play some funky 8bit tunes.
|
|
|
|
Up to two simultaneous audio voices are supported, one driven by timer 1 and another driven by timer 3. The following pins can be defined as audio outputs in config.h:
|
|
|
|
Timer 1:
|
|
`#define B5_AUDIO`
|
|
`#define B6_AUDIO`
|
|
`#define B7_AUDIO`
|
|
|
|
Timer 3:
|
|
`#define C4_AUDIO`
|
|
`#define C5_AUDIO`
|
|
`#define C6_AUDIO`
|
|
|
|
If you add `AUDIO_ENABLE = yes` to your `rules.mk`, there's a couple different sounds that will automatically be enabled without any other configuration:
|
|
|
|
```
|
|
STARTUP_SONG // plays when the keyboard starts up (audio.c)
|
|
GOODBYE_SONG // plays when you press the RESET key (quantum.c)
|
|
AG_NORM_SONG // plays when you press AG_NORM (quantum.c)
|
|
AG_SWAP_SONG // plays when you press AG_SWAP (quantum.c)
|
|
CG_NORM_SONG // plays when you press CG_NORM (quantum.c)
|
|
CG_SWAP_SONG // plays when you press CG_SWAP (quantum.c)
|
|
MUSIC_ON_SONG // plays when music mode is activated (process_music.c)
|
|
MUSIC_OFF_SONG // plays when music mode is deactivated (process_music.c)
|
|
CHROMATIC_SONG // plays when the chromatic music mode is selected (process_music.c)
|
|
GUITAR_SONG // plays when the guitar music mode is selected (process_music.c)
|
|
VIOLIN_SONG // plays when the violin music mode is selected (process_music.c)
|
|
MAJOR_SONG // plays when the major music mode is selected (process_music.c)
|
|
```
|
|
|
|
You can override the default songs by doing something like this in your `config.h`:
|
|
|
|
```c
|
|
#ifdef AUDIO_ENABLE
|
|
#define STARTUP_SONG SONG(STARTUP_SOUND)
|
|
#endif
|
|
```
|
|
|
|
A full list of sounds can be found in [quantum/audio/song_list.h](https://github.com/qmk/qmk_firmware/blob/master/quantum/audio/song_list.h) - feel free to add your own to this list! All available notes can be seen in [quantum/audio/musical_notes.h](https://github.com/qmk/qmk_firmware/blob/master/quantum/audio/musical_notes.h).
|
|
|
|
To play a custom sound at a particular time, you can define a song like this (near the top of the file):
|
|
|
|
```c
|
|
float my_song[][2] = SONG(QWERTY_SOUND);
|
|
```
|
|
|
|
And then play your song like this:
|
|
|
|
```c
|
|
PLAY_SONG(my_song);
|
|
```
|
|
|
|
Alternatively, you can play it in a loop like this:
|
|
|
|
```c
|
|
PLAY_LOOP(my_song);
|
|
```
|
|
|
|
It's advised that you wrap all audio features in `#ifdef AUDIO_ENABLE` / `#endif` to avoid causing problems when audio isn't built into the keyboard.
|
|
|
|
The available keycodes for audio are:
|
|
|
|
* `AU_ON` - Turn Audio Feature on
|
|
* `AU_OFF` - Turn Audio Feature off
|
|
* `AU_TOG` - Toggle Audio Feature state
|
|
|
|
!> These keycodes turn all of the audio functionality on and off. Turning it off means that audio feedback, audio clicky, music mode, etc. are disabled, completely.
|
|
|
|
## ARM Audio Volume
|
|
|
|
For ARM devices, you can adjust the DAC sample values. If your board is too loud for you or your coworkers, you can set the max using `DAC_SAMPLE_MAX` in your `config.h`:
|
|
|
|
```c
|
|
#define DAC_SAMPLE_MAX 65535U
|
|
```
|
|
|
|
## Music Mode
|
|
|
|
The music mode maps your columns to a chromatic scale, and your rows to octaves. This works best with ortholinear keyboards, but can be made to work with others. All keycodes less than `0xFF` get blocked, so you won't type while playing notes - if you have special keys/mods, those will still work. A work-around for this is to jump to a different layer with KC_NOs before (or after) enabling music mode.
|
|
|
|
Recording is experimental due to some memory issues - if you experience some weird behavior, unplugging/replugging your keyboard will fix things.
|
|
|
|
Keycodes available:
|
|
|
|
* `MU_ON` - Turn music mode on
|
|
* `MU_OFF` - Turn music mode off
|
|
* `MU_TOG` - Toggle music mode
|
|
* `MU_MOD` - Cycle through the music modes:
|
|
* `CHROMATIC_MODE` - Chromatic scale, row changes the octave
|
|
* `GUITAR_MODE` - Chromatic scale, but the row changes the string (+5 st)
|
|
* `VIOLIN_MODE` - Chromatic scale, but the row changes the string (+7 st)
|
|
* `MAJOR_MODE` - Major scale
|
|
|
|
In music mode, the following keycodes work differently, and don't pass through:
|
|
|
|
* `LCTL` - start a recording
|
|
* `LALT` - stop recording/stop playing
|
|
* `LGUI` - play recording
|
|
* `KC_UP` - speed-up playback
|
|
* `KC_DOWN` - slow-down playback
|
|
|
|
The pitch standard (`PITCH_STANDARD_A`) is 440.0f by default - to change this, add something like this to your `config.h`:
|
|
|
|
#define PITCH_STANDARD_A 432.0f
|
|
|
|
You can completely disable Music Mode as well. This is useful, if you're pressed for space on your controller. To disable it, add this to your `config.h`:
|
|
|
|
#define NO_MUSIC_MODE
|
|
|
|
### Music Mask
|
|
|
|
By default, `MUSIC_MASK` is set to `keycode < 0xFF` which means keycodes less than `0xFF` are turned into notes, and don't output anything. You can change this by defining this in your `config.h` like this:
|
|
|
|
#define MUSIC_MASK keycode != KC_NO
|
|
|
|
Which will capture all keycodes - be careful, this will get you stuck in music mode until you restart your keyboard!
|
|
|
|
For a more advanced way to control which keycodes should still be processed, you can use `music_mask_kb(keycode)` in `<keyboard>.c` and `music_mask_user(keycode)` in your `keymap.c`:
|
|
|
|
bool music_mask_user(uint16_t keycode) {
|
|
switch (keycode) {
|
|
case RAISE:
|
|
case LOWER:
|
|
return false;
|
|
default:
|
|
return true;
|
|
}
|
|
}
|
|
|
|
Things that return false are not part of the mask, and are always processed.
|
|
|
|
### Music Map
|
|
|
|
By default, the Music Mode uses the columns and row to determine the scale for the keys. For a board that uses a rectangular matrix that matches the keyboard layout, this is just fine. However, for boards that use a more complicated matrix (such as the Planck Rev6, or many split keyboards) this would result in a very skewed experience.
|
|
|
|
However, the Music Map option allows you to remap the scaling for the music mode, so it fits the layout, and is more natural.
|
|
|
|
To enable this feature, add `#define MUSIC_MAP` to your `config.h` file, and then you will want to add a `uint8_t music_map` to your keyboard's `c` file, or your `keymap.c`.
|
|
|
|
```c
|
|
const uint8_t music_map[MATRIX_ROWS][MATRIX_COLS] = LAYOUT_ortho_4x12(
|
|
36, 37, 38, 39, 40, 41, 42, 43, 44, 45, 46, 47,
|
|
24, 25, 26, 27, 28, 29, 30, 31, 32, 33, 34, 35,
|
|
12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22, 23,
|
|
0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11
|
|
);
|
|
```
|
|
|
|
You will want to use whichever `LAYOUT` macro that your keyboard uses here. This maps it to the correct key location. Start in the bottom left of the keyboard layout, and move to the right, and then upwards. Fill in all the entries until you have a complete matrix.
|
|
|
|
You can look at the [Planck Keyboard](https://github.com/qmk/qmk_firmware/blob/e9ace1487887c1f8b4a7e8e6d87c322988bec9ce/keyboards/planck/planck.c#L24-L29) as an example of how to implement this.
|
|
|
|
## Audio Click
|
|
|
|
This adds a click sound each time you hit a button, to simulate click sounds from the keyboard. And the sounds are slightly different for each keypress, so it doesn't sound like a single long note, if you type rapidly.
|
|
|
|
* `CK_TOGG` - Toggles the status (will play sound if enabled)
|
|
* `CK_ON` - Turns on Audio Click (plays sound)
|
|
* `CK_OFF` - Turns off Audio Click (doesn't play sound)
|
|
* `CK_RST` - Resets the frequency to the default state (plays sound at default frequency)
|
|
* `CK_UP` - Increases the frequency of the clicks (plays sound at new frequency)
|
|
* `CK_DOWN` - Decreases the frequency of the clicks (plays sound at new frequency)
|
|
|
|
|
|
The feature is disabled by default, to save space. To enable it, add this to your `config.h`:
|
|
|
|
#define AUDIO_CLICKY
|
|
|
|
|
|
You can configure the default, min and max frequencies, the stepping and built in randomness by defining these values:
|
|
|
|
| Option | Default Value | Description |
|
|
|--------|---------------|-------------|
|
|
| `AUDIO_CLICKY_FREQ_DEFAULT` | 440.0f | Sets the default/starting audio frequency for the clicky sounds. |
|
|
| `AUDIO_CLICKY_FREQ_MIN` | 65.0f | Sets the lowest frequency (under 60f are a bit buggy). |
|
|
| `AUDIO_CLICKY_FREQ_MAX` | 1500.0f | Sets the the highest frequency. Too high may result in coworkers attacking you. |
|
|
| `AUDIO_CLICKY_FREQ_FACTOR` | 1.18921f| Sets the stepping of UP/DOWN key codes. This is a multiplicative factor. The default steps the frequency up/down by a musical minor third. |
|
|
| `AUDIO_CLICKY_FREQ_RANDOMNESS` | 0.05f | Sets a factor of randomness for the clicks, Setting this to `0f` will make each click identical, and `1.0f` will make this sound much like the 90's computer screen scrolling/typing effect. |
|
|
| `AUDIO_CLICKY_DELAY_DURATION` | 1 | An integer note duration where 1 is 1/16th of the tempo, or a sixty-fourth note (see `quantum/audio/musical_notes.h` for implementation details). The main clicky effect will be delayed by this duration. Adjusting this to values around 6-12 will help compensate for loud switches. |
|
|
|
|
|
|
|
|
|
|
## MIDI Functionality
|
|
|
|
This is still a WIP, but check out `quantum/process_keycode/process_midi.c` to see what's happening. Enable from the Makefile.
|
|
|
|
|
|
## Audio Keycodes
|
|
|
|
|Key |Aliases |Description |
|
|
|----------------|---------|----------------------------------|
|
|
|`AU_ON` | |Audio mode on |
|
|
|`AU_OFF` | |Audio mode off |
|
|
|`AU_TOG` | |Toggles Audio mode |
|
|
|`CLICKY_TOGGLE` |`CK_TOGG`|Toggles Audio clicky mode |
|
|
|`CLICKY_UP` |`CK_UP` |Increases frequency of the clicks |
|
|
|`CLICKY_DOWN` |`CK_DOWN`|Decreases frequency of the clicks |
|
|
|`CLICKY_RESET` |`CK_RST` |Resets frequency to default |
|
|
|`MU_ON` | |Turns on Music Mode |
|
|
|`MU_OFF` | |Turns off Music Mode |
|
|
|`MU_TOG` | |Toggles Music Mode |
|
|
|`MU_MOD` | |Cycles through the music modes |
|
|
|
|
<!-- FIXME: this formatting needs work
|
|
|
|
## Audio
|
|
|
|
```c
|
|
#ifdef AUDIO_ENABLE
|
|
AU_ON,
|
|
AU_OFF,
|
|
AU_TOG,
|
|
|
|
// Music mode on/off/toggle
|
|
MU_ON,
|
|
MU_OFF,
|
|
MU_TOG,
|
|
|
|
// Music voice iterate
|
|
MUV_IN,
|
|
MUV_DE,
|
|
#endif
|
|
```
|
|
|
|
### Midi
|
|
|
|
#if !MIDI_ENABLE_STRICT || (defined(MIDI_ENABLE) && defined(MIDI_BASIC))
|
|
MI_ON, // send midi notes when music mode is enabled
|
|
MI_OFF, // don't send midi notes when music mode is enabled
|
|
#endif
|
|
|
|
MIDI_TONE_MIN,
|
|
MIDI_TONE_MAX
|
|
|
|
MI_C = MIDI_TONE_MIN,
|
|
MI_Cs,
|
|
MI_Db = MI_Cs,
|
|
MI_D,
|
|
MI_Ds,
|
|
MI_Eb = MI_Ds,
|
|
MI_E,
|
|
MI_F,
|
|
MI_Fs,
|
|
MI_Gb = MI_Fs,
|
|
MI_G,
|
|
MI_Gs,
|
|
MI_Ab = MI_Gs,
|
|
MI_A,
|
|
MI_As,
|
|
MI_Bb = MI_As,
|
|
MI_B,
|
|
|
|
MIDI_TONE_KEYCODE_OCTAVES > 1
|
|
|
|
where x = 1-5:
|
|
MI_C_x,
|
|
MI_Cs_x,
|
|
MI_Db_x = MI_Cs_x,
|
|
MI_D_x,
|
|
MI_Ds_x,
|
|
MI_Eb_x = MI_Ds_x,
|
|
MI_E_x,
|
|
MI_F_x,
|
|
MI_Fs_x,
|
|
MI_Gb_x = MI_Fs_x,
|
|
MI_G_x,
|
|
MI_Gs_x,
|
|
MI_Ab_x = MI_Gs_x,
|
|
MI_A_x,
|
|
MI_As_x,
|
|
MI_Bb_x = MI_As_x,
|
|
MI_B_x,
|
|
|
|
MI_OCT_Nx 1-2
|
|
MI_OCT_x 0-7
|
|
MIDI_OCTAVE_MIN = MI_OCT_N2,
|
|
MIDI_OCTAVE_MAX = MI_OCT_7,
|
|
MI_OCTD, // octave down
|
|
MI_OCTU, // octave up
|
|
|
|
MI_TRNS_Nx 1-6
|
|
MI_TRNS_x 0-6
|
|
MIDI_TRANSPOSE_MIN = MI_TRNS_N6,
|
|
MIDI_TRANSPOSE_MAX = MI_TRNS_6,
|
|
MI_TRNSD, // transpose down
|
|
MI_TRNSU, // transpose up
|
|
|
|
MI_VEL_x 1-10
|
|
MIDI_VELOCITY_MIN = MI_VEL_1,
|
|
MIDI_VELOCITY_MAX = MI_VEL_9,
|
|
MI_VELD, // velocity down
|
|
MI_VELU, // velocity up
|
|
|
|
MI_CHx 1-16
|
|
MIDI_CHANNEL_MIN = MI_CH1
|
|
MIDI_CHANNEL_MAX = MI_CH16,
|
|
MI_CHD, // previous channel
|
|
MI_CHU, // next channel
|
|
|
|
MI_ALLOFF, // all notes off
|
|
|
|
MI_SUS, // sustain
|
|
MI_PORT, // portamento
|
|
MI_SOST, // sostenuto
|
|
MI_SOFT, // soft pedal
|
|
MI_LEG, // legato
|
|
|
|
MI_MOD, // modulation
|
|
MI_MODSD, // decrease modulation speed
|
|
MI_MODSU, // increase modulation speed
|
|
#endif // MIDI_ADVANCED
|
|
|
|
-->
|