qmk_firmware/keyboards/tada68/readme.md
2017-07-05 11:48:19 -04:00

841 B
Executable File

TADA68 keyboard firmware

  1. from the keyboards/tada68 directory run:
$ make flashbin
  1. hit the reset button on the TADA, the lights will start flashing.

  2. You'll see a new drive on your computer called TADA68. Backup the original factory FLASH.BIN file thats inside it.

  3. Delete FLASH.BIN from the TADA drive and copy tada68_default.bin that was generated at the root of the qmk directory into the TADA drive.

  4. Hit ESC on the keyboard. The lights will stop flashing and your firmware is loaded!

RGB

This board has unused pins, which means that you can add some nice RGB leds, although they have no use at this moment. Not a single transparent case has been made yet. Here's where you have to solder the wires on the PCB: Image of KC60 with RGB Underglow