qmk_firmware/keyboards/geekboards/macropad_v2/readme.md
Sergey Omelchenko e03d72d71e
[Keyboard] Geekboards Macropad V2 keyboard ()
* Initial commit of Geekboards Macropad V2 keyboard

* Apply suggestions from code review

Co-authored-by: Joel Challis <git@zvecr.com>

* Apply suggestions from code review: delete unnecessary files

* Fixed typos

* Apply suggestions from code review

Co-authored-by: Ryan <fauxpark@gmail.com>

* Change RGB_MATRIX config syntax following recent core changes

* Apply suggestions from drashna code review

* Remove unnecessary file (it is now defined in the core)

* Remove unnecessary code, due to PR 11084 approve

Co-authored-by: Joel Challis <git@zvecr.com>
Co-authored-by: Ryan <fauxpark@gmail.com>
2020-12-08 15:58:32 -08:00

1.1 KiB

geekboards/macropad_v2

Geekboards Macropad v2

8-keys macropad with CNC aluminium case, RGB LEDs for both backlight and switches, hot-swap connectors.

Keyboard Maintainer: ruddy17
Hardware Supported: Geekboards Macropad v2, STM32F072C8T6
Hardware Availability: https://geekboards.ru

Compile instruction for this keyboard (after setting up your build environment):

make geekboards/macropad_v2:via

Update firmware

Enter bootloader

  1. Press and hold leftmost button on top row (where ESC usually is)
  2. Plug in USB
  3. Keep holding the button for 3 more seconds
  4. Release the button

Alternatively:

  1. Remove bottom cover
  2. On the pcb short together two contacts labeled BOOT0
  3. Plug in USB
  4. Release BOOT0

Flash

make geekboards/macropad_v2:via:flash

See the build environment setup and the make instructions for more information. Brand new to QMK? Start with our Complete Newbs Guide.