qmk_firmware/keyboards/duck/orion/v3/readme.md
MechMerlin 60b2a9a5ea [Keyboard] Preliminary Support for Duck Orion V3 (#6892)
* initial commit

* fixup init_rows and read_rows routine

* fixup matrix based on Marcus's tracing info

* add a temporary keymap

* add notes

* use a standard tkl ansi keymap

* turn on that last column

* backslash and backspace row left to fix

* reorg from backslash to pgdn

* got the matrix done but the backspace location at K4N is still suspect

* add reset info into readme

* add qmk configurator support

* add community layout support

* remove uneeded keymap readme

* add a new column just for the reset switch

* change copyright dates

* add cautionary message to readme as we don't know about the lighting condition yet

* Update keyboards/duck/orion/v3/v3.c

Co-Authored-By: fauxpark <fauxpark@gmail.com>

* Update keyboards/duck/orion/v3/v3.c

Co-Authored-By: fauxpark <fauxpark@gmail.com>

* Update keyboards/duck/orion/v3/v3.c

Co-Authored-By: fauxpark <fauxpark@gmail.com>

* change bootloader comments
2019-10-04 22:06:57 -07:00

30 lines
1.2 KiB
Markdown

# Duck Orion V3
Non official firmware for custom TKL Korean keyboard made by Duck.
Group buy was run December 2018 via [geekhack](https://geekhack.org/index.php?topic=98581.0) with 100 keyboards total.
Keyboard Maintainer: [MechMerlin](https://github.com/mechmerlin)
Hardware Supported: Duck Eagle/Viper PCB Ver 2.0, Atmega32u4
Hardware Availability: Wait until GB of the next revision
Make example for this keyboard (after setting up your build environment):
make duck/orion/v3:default
**Reset Key:** To put the Orion V3 into reset, hold Backspace key (`K4N`) while plugging in.
**CAUTION:** At this time 10/03/19 lighting has not been tested fully and may not properly work.
See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
## Hardware Notes
The Orion V3 PCB consists of:
### Microchips
2 74HC237D 3-to-8 line decoders
1 Atmega32u4 microcontroller
2 WS2811 LED controller
## Notes
Special thanks to Marcus aka Keebology for doing this remotely and mapping the matrix.