[Keyboard] E6V2 Bootmapper Client QMK port (#5495)
* initial commit of e6v2 bmc files * update readme with bmc template and reset key location * fix up the switch matrix * add usbconfig.h file * add i2c files * cleanup config.h * cleanup rules.mk and remove non atmega32a architecture code * add an appropriate keymap for testing * update readme with warning not to flash this hex file onto atmega32u4 e6v2 * get rgb lights working * add QMK Configurator support for 60_ansi layout * add hhkb support layout * add additional layouts such as tsangan and all and included QMK Configurator support for them * add bootmagic lite, and have it be set to Esc or the key located at k50 * update readme * fixup spacing for LAYOUT_all electrical matrix * add some pragma once magic * use i2c_master instead of custom i2c.c * remove the custom i2c.c * restore a more valid default keymap * add eep_rst to keymap
This commit is contained in:
MechMerlin
Drashna Jaelre
parent
67ca9e0c85
commit
04684a94ef
96
keyboards/exclusive/e6v2/bmc/bmc.c
Normal file
96
keyboards/exclusive/e6v2/bmc/bmc.c
Normal file
@ -0,0 +1,96 @@
|
|||||||
|
/* Copyright 2019 MechMerlin
|
||||||
|
*
|
||||||
|
* This program is free software: you can redistribute it and/or modify
|
||||||
|
* it under the terms of the GNU General Public License as published by
|
||||||
|
* the Free Software Foundation, either version 2 of the License, or
|
||||||
|
* (at your option) any later version.
|
||||||
|
*
|
||||||
|
* This program is distributed in the hope that it will be useful,
|
||||||
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||||
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||||
|
* GNU General Public License for more details.
|
||||||
|
*
|
||||||
|
* You should have received a copy of the GNU General Public License
|
||||||
|
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||||
|
*/
|
||||||
|
#include "bmc.h"
|
||||||
|
#include "rgblight.h"
|
||||||
|
#include "i2c_master.h"
|
||||||
|
|
||||||
|
void matrix_init_kb(void) {
|
||||||
|
// put your keyboard start-up code here
|
||||||
|
// runs once when the firmware starts up
|
||||||
|
|
||||||
|
matrix_init_user();
|
||||||
|
}
|
||||||
|
|
||||||
|
void matrix_scan_kb(void) {
|
||||||
|
// put your looping keyboard code here
|
||||||
|
// runs every cycle (a lot)
|
||||||
|
|
||||||
|
matrix_scan_user();
|
||||||
|
}
|
||||||
|
|
||||||
|
bool process_record_kb(uint16_t keycode, keyrecord_t *record) {
|
||||||
|
// put your per-action keyboard code here
|
||||||
|
// runs for every action, just before processing by the firmware
|
||||||
|
|
||||||
|
return process_record_user(keycode, record);
|
||||||
|
}
|
||||||
|
|
||||||
|
void led_set_kb(uint8_t usb_led) {
|
||||||
|
// put your keyboard LED indicator (ex: Caps Lock LED) toggling code here
|
||||||
|
|
||||||
|
led_set_user(usb_led);
|
||||||
|
}
|
||||||
|
|
||||||
|
#ifdef RGBLIGHT_ENABLE
|
||||||
|
extern rgblight_config_t rgblight_config;
|
||||||
|
|
||||||
|
void rgblight_set(void) {
|
||||||
|
if (!rgblight_config.enable) {
|
||||||
|
for (uint8_t i = 0; i < RGBLED_NUM; i++) {
|
||||||
|
led[i].r = 0;
|
||||||
|
led[i].g = 0;
|
||||||
|
led[i].b = 0;
|
||||||
|
}
|
||||||
|
}
|
||||||
|
|
||||||
|
i2c_init();
|
||||||
|
i2c_transmit(0xb0, (uint8_t*)led, 3 * RGBLED_NUM, 100);
|
||||||
|
}
|
||||||
|
#endif
|
||||||
|
|
||||||
|
__attribute__ ((weak))
|
||||||
|
void matrix_scan_user(void) {
|
||||||
|
}
|
||||||
|
|
||||||
|
void backlight_init_ports(void) {
|
||||||
|
// initialize pins D0, D1, D4 and D6 as output
|
||||||
|
setPinOutput(D0);
|
||||||
|
setPinOutput(D1);
|
||||||
|
setPinOutput(D4);
|
||||||
|
setPinOutput(D6);
|
||||||
|
|
||||||
|
// turn RGB LEDs on
|
||||||
|
writePinHigh(D0);
|
||||||
|
writePinHigh(D1);
|
||||||
|
writePinHigh(D4);
|
||||||
|
writePinHigh(D6);
|
||||||
|
}
|
||||||
|
|
||||||
|
void backlight_set(uint8_t level) {
|
||||||
|
if (level == 0) {
|
||||||
|
// turn RGB LEDs off
|
||||||
|
writePinLow(D0);
|
||||||
|
writePinLow(D1);
|
||||||
|
writePinLow(D4);
|
||||||
|
writePinLow(D6);
|
||||||
|
} else {
|
||||||
|
// turn RGB LEDs on
|
||||||
|
writePinHigh(D0);
|
||||||
|
writePinHigh(D1);
|
||||||
|
writePinHigh(D4);
|
||||||
|
writePinHigh(D6);
|
||||||
|
}
|
||||||
|
}
|
||||||
101
keyboards/exclusive/e6v2/bmc/bmc.h
Normal file
101
keyboards/exclusive/e6v2/bmc/bmc.h
Normal file
@ -0,0 +1,101 @@
|
|||||||
|
/* Copyright 2019 MechMerlin
|
||||||
|
*
|
||||||
|
* This program is free software: you can redistribute it and/or modify
|
||||||
|
* it under the terms of the GNU General Public License as published by
|
||||||
|
* the Free Software Foundation, either version 2 of the License, or
|
||||||
|
* (at your option) any later version.
|
||||||
|
*
|
||||||
|
* This program is distributed in the hope that it will be useful,
|
||||||
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||||
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||||
|
* GNU General Public License for more details.
|
||||||
|
*
|
||||||
|
* You should have received a copy of the GNU General Public License
|
||||||
|
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||||
|
*/
|
||||||
|
#pragma once
|
||||||
|
|
||||||
|
#include "quantum.h"
|
||||||
|
|
||||||
|
/* This a shortcut to help you visually see your layout.
|
||||||
|
*
|
||||||
|
* The first section contains all of the arguments representing the physical
|
||||||
|
* layout of the board and position of the keys.
|
||||||
|
*
|
||||||
|
* The second converts the arguments into a two-dimensional array which
|
||||||
|
* represents the switch matrix.
|
||||||
|
*/
|
||||||
|
|
||||||
|
// LAYOUT_all ignores the key often coded as ~# to the left of Enter on ISO layouts.
|
||||||
|
// This is done as it shares the same row AND col as the pipe key.
|
||||||
|
#define LAYOUT_all( \
|
||||||
|
k50, k41, k42, k43, k44, k45, k61, k68, k78, k71, k49, k48, k47, k52, k4A, \
|
||||||
|
k30, k31, k32, k33, k34, k35, k62, k67, k77, k72, k39, k38, k37, k36, \
|
||||||
|
k20, k21, k22, k23, k24, k25, k63, k66, k76, k73, k29, k28, k26, \
|
||||||
|
k10, k53, k11, k12, k13, k14, k15, k64, k6A, k7A, k74, k19, k18, k54, \
|
||||||
|
k00, k01, k02, k75, k04, k08, k09, k05 \
|
||||||
|
) \
|
||||||
|
{ \
|
||||||
|
{ k00, k01, k02, KC_NO, k04, k05, KC_NO, KC_NO, k08, k09, KC_NO }, \
|
||||||
|
{ k10, k11, k12, k13, k14, k15, KC_NO, KC_NO, k18, k19, KC_NO }, \
|
||||||
|
{ k20, k21, k22, k23, k24, k25, k26, KC_NO, k28, k29, KC_NO }, \
|
||||||
|
{ k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, KC_NO }, \
|
||||||
|
{ KC_NO, k41, k42, k43, k44, k45, KC_NO, k47, k48, k49, k4A }, \
|
||||||
|
{ k50, KC_NO, k52, k53, k54, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO }, \
|
||||||
|
{ KC_NO, k61, k62, k63, k64, KC_NO, k66, k67, k68, KC_NO, k6A }, \
|
||||||
|
{ KC_NO, k71, k72, k73, k74, k75, k76, k77, k78, KC_NO, k7A }, \
|
||||||
|
}
|
||||||
|
|
||||||
|
#define LAYOUT_60_ansi( \
|
||||||
|
k50, k41, k42, k43, k44, k45, k61, k68, k78, k71, k49, k48, k47, k4A, \
|
||||||
|
k30, k31, k32, k33, k34, k35, k62, k67, k77, k72, k39, k38, k37, k36, \
|
||||||
|
k20, k21, k22, k23, k24, k25, k63, k66, k76, k73, k29, k28, k26, \
|
||||||
|
k10, k11, k12, k13, k14, k15, k64, k6A, k7A, k74, k19, k18, \
|
||||||
|
k00, k01, k02, k75, k04, k08, k09, k05 \
|
||||||
|
) \
|
||||||
|
{ \
|
||||||
|
{ k00, k01, k02, KC_NO, k04, k05, KC_NO, KC_NO, k08, k09, KC_NO }, \
|
||||||
|
{ k10, k11, k12, k13, k14, k15, KC_NO, KC_NO, k18, k19, KC_NO }, \
|
||||||
|
{ k20, k21, k22, k23, k24, k25, k26, KC_NO, k28, k29, KC_NO }, \
|
||||||
|
{ k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, KC_NO }, \
|
||||||
|
{ KC_NO, k41, k42, k43, k44, k45, KC_NO, k47, k48, k49, k4A }, \
|
||||||
|
{ k50, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO }, \
|
||||||
|
{ KC_NO, k61, k62, k63, k64, KC_NO, k66, k67, k68, KC_NO, k6A }, \
|
||||||
|
{ KC_NO, k71, k72, k73, k74, k75, k76, k77, k78, KC_NO, k7A }, \
|
||||||
|
}
|
||||||
|
|
||||||
|
#define LAYOUT_60_hhkb( \
|
||||||
|
k50, k41, k42, k43, k44, k45, k61, k68, k78, k71, k49, k48, k47, k52, k4A, \
|
||||||
|
k30, k31, k32, k33, k34, k35, k62, k67, k77, k72, k39, k38, k37, k36, \
|
||||||
|
k20, k21, k22, k23, k24, k25, k63, k66, k76, k73, k29, k28, k26, \
|
||||||
|
k10, k11, k12, k13, k14, k15, k64, k6A, k7A, k74, k19, k18, k54, \
|
||||||
|
k01, k02, k75, k08, k09 \
|
||||||
|
) \
|
||||||
|
{ \
|
||||||
|
{ KC_NO, k01, k02, KC_NO, KC_NO, k05, KC_NO, KC_NO, k08, k09, KC_NO }, \
|
||||||
|
{ k10, k11, k12, k13, k14, k15, KC_NO, KC_NO, k18, k19, KC_NO }, \
|
||||||
|
{ k20, k21, k22, k23, k24, k25, k26, KC_NO, k28, k29, KC_NO }, \
|
||||||
|
{ k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, KC_NO }, \
|
||||||
|
{ KC_NO, k41, k42, k43, k44, k45, KC_NO, k47, k48, k49, k4A }, \
|
||||||
|
{ k50, KC_NO, k52, KC_NO, k54, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO }, \
|
||||||
|
{ KC_NO, k61, k62, k63, k64, KC_NO, k66, k67, k68, KC_NO, k6A }, \
|
||||||
|
{ KC_NO, k71, k72, k73, k74, k75, k76, k77, k78, KC_NO, k7A }, \
|
||||||
|
}
|
||||||
|
|
||||||
|
#define LAYOUT_60_tsangan( \
|
||||||
|
k50, k41, k42, k43, k44, k45, k61, k68, k78, k71, k49, k48, k47, k52, k4A, \
|
||||||
|
k30, k31, k32, k33, k34, k35, k62, k67, k77, k72, k39, k38, k37, k36, \
|
||||||
|
k20, k21, k22, k23, k24, k25, k63, k66, k76, k73, k29, k28, k26, \
|
||||||
|
k10, k11, k12, k13, k14, k15, k64, k6A, k7A, k74, k19, k18, k54, \
|
||||||
|
k00, k01, k02, k75, k08, k09, k05 \
|
||||||
|
) \
|
||||||
|
{ \
|
||||||
|
{ k00, k01, k02, KC_NO, KC_NO, k05, KC_NO, KC_NO, k08, k09, KC_NO }, \
|
||||||
|
{ k10, k11, k12, k13, k14, k15, KC_NO, KC_NO, k18, k19, KC_NO }, \
|
||||||
|
{ k20, k21, k22, k23, k24, k25, k26, KC_NO, k28, k29, KC_NO }, \
|
||||||
|
{ k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, KC_NO }, \
|
||||||
|
{ KC_NO, k41, k42, k43, k44, k45, KC_NO, k47, k48, k49, k4A }, \
|
||||||
|
{ k50, KC_NO, k52, KC_NO, k54, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO }, \
|
||||||
|
{ KC_NO, k61, k62, k63, k64, KC_NO, k66, k67, k68, KC_NO, k6A }, \
|
||||||
|
{ KC_NO, k71, k72, k73, k74, k75, k76, k77, k78, KC_NO, k7A }, \
|
||||||
|
}
|
||||||
57
keyboards/exclusive/e6v2/bmc/config.h
Normal file
57
keyboards/exclusive/e6v2/bmc/config.h
Normal file
@ -0,0 +1,57 @@
|
|||||||
|
/*
|
||||||
|
Copyright 2019 MechMerlin
|
||||||
|
|
||||||
|
This program is free software: you can redistribute it and/or modify
|
||||||
|
it under the terms of the GNU General Public License as published by
|
||||||
|
the Free Software Foundation, either version 2 of the License, or
|
||||||
|
(at your option) any later version.
|
||||||
|
|
||||||
|
This program is distributed in the hope that it will be useful,
|
||||||
|
but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||||
|
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||||
|
GNU General Public License for more details.
|
||||||
|
|
||||||
|
You should have received a copy of the GNU General Public License
|
||||||
|
along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||||
|
*/
|
||||||
|
|
||||||
|
#pragma once
|
||||||
|
|
||||||
|
/* USB Device descriptor parameter */
|
||||||
|
#define VENDOR_ID 0xFEED
|
||||||
|
#define PRODUCT_ID 0x0000
|
||||||
|
#define DEVICE_VER 0x0001
|
||||||
|
#define MANUFACTURER exclusive
|
||||||
|
#define PRODUCT e6v2 bmc
|
||||||
|
#define DESCRIPTION A custom 60% keyboard
|
||||||
|
|
||||||
|
/* key matrix size */
|
||||||
|
#define MATRIX_ROWS 8
|
||||||
|
#define MATRIX_COLS 11
|
||||||
|
|
||||||
|
/*
|
||||||
|
* Keyboard Matrix Assignments
|
||||||
|
*
|
||||||
|
* Change this to how you wired your keyboard
|
||||||
|
* COLS: AVR pins used for columns, left to right
|
||||||
|
* ROWS: AVR pins used for rows, top to bottom
|
||||||
|
* DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
|
||||||
|
* ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
|
||||||
|
*
|
||||||
|
*/
|
||||||
|
|
||||||
|
// 0 1 2 3 4 5 6 7 8 9 A
|
||||||
|
#define MATRIX_ROW_PINS { B0, B1, B2, B3, B4, B5, B6, B7 }
|
||||||
|
#define MATRIX_COL_PINS { A0, A1, A2, A3, A4, A5, C2, C3, C4, C5, D7 }
|
||||||
|
#define DIODE_DIRECTION COL2ROW
|
||||||
|
|
||||||
|
|
||||||
|
#define RGBLED_NUM 6
|
||||||
|
#define RGBLIGHT_ANIMATIONS
|
||||||
|
|
||||||
|
#define NO_UART 1
|
||||||
|
#define BOOTLOADHID_BOOTLOADER 1
|
||||||
|
|
||||||
|
// Set bootmagic lite key to the key commonly programmed as Esc.
|
||||||
|
#define BOOTMAGIC_LITE_ROW 5
|
||||||
|
#define BOOTMAGIC_LITE_COLUMN 0
|
||||||
24
keyboards/exclusive/e6v2/bmc/info.json
Normal file
24
keyboards/exclusive/e6v2/bmc/info.json
Normal file
@ -0,0 +1,24 @@
|
|||||||
|
{
|
||||||
|
"keyboard_name": "",
|
||||||
|
"url": "",
|
||||||
|
"maintainer": "qmk",
|
||||||
|
"width": 15,
|
||||||
|
"height": 5,
|
||||||
|
"layouts": {
|
||||||
|
"LAYOUT_all": {
|
||||||
|
"layout": [{"x":0, "y":0}, {"x":1, "y":0}, {"x":2, "y":0}, {"x":3, "y":0}, {"x":4, "y":0}, {"x":5, "y":0}, {"x":6, "y":0}, {"x":7, "y":0}, {"x":8, "y":0}, {"x":9, "y":0}, {"x":10, "y":0}, {"x":11, "y":0}, {"x":12, "y":0}, {"x":13, "y":0}, {"x":14, "y":0}, {"x":0, "y":1, "w":1.5}, {"x":1.5, "y":1}, {"x":2.5, "y":1}, {"x":3.5, "y":1}, {"x":4.5, "y":1}, {"x":5.5, "y":1}, {"x":6.5, "y":1}, {"x":7.5, "y":1}, {"x":8.5, "y":1}, {"x":9.5, "y":1}, {"x":10.5, "y":1}, {"x":11.5, "y":1}, {"x":12.5, "y":1}, {"x":13.5, "y":1, "w":1.5}, {"x":0, "y":2, "w":1.75}, {"x":1.75, "y":2}, {"x":2.75, "y":2}, {"x":3.75, "y":2}, {"x":4.75, "y":2}, {"x":5.75, "y":2}, {"x":6.75, "y":2}, {"x":7.75, "y":2}, {"x":8.75, "y":2}, {"x":9.75, "y":2}, {"x":10.75, "y":2}, {"x":11.75, "y":2}, {"x":12.75, "y":2, "w":2.25}, {"x":0, "y":3, "w":1.25}, {"x":1.25, "y":3}, {"x":2.25, "y":3}, {"x":3.25, "y":3}, {"x":4.25, "y":3}, {"x":5.25, "y":3}, {"x":6.25, "y":3}, {"x":7.25, "y":3}, {"x":8.25, "y":3}, {"x":9.25, "y":3}, {"x":10.25, "y":3}, {"x":11.25, "y":3}, {"x":12.25, "y":3, "w":1.75}, {"x":14, "y":3}, {"x":0, "y":4, "w":1.25}, {"x":1.25, "y":4, "w":1.25}, {"x":2.5, "y":4, "w":1.25}, {"x":3.75, "y":4, "w":6.26}, {"x":10.0, "y":4, "w":1.25}, {"x":11.25, "y":4, "w":1.25}, {"x":12.5, "y":4, "w":1.25}, {"x":13.75, "y":4, "w":1.25}]
|
||||||
|
},
|
||||||
|
|
||||||
|
"LAYOUT_60_ansi": {
|
||||||
|
"layout": [{"x":0, "y":0}, {"x":1, "y":0}, {"x":2, "y":0}, {"x":3, "y":0}, {"x":4, "y":0}, {"x":5, "y":0}, {"x":6, "y":0}, {"x":7, "y":0}, {"x":8, "y":0}, {"x":9, "y":0}, {"x":10, "y":0}, {"x":11, "y":0}, {"x":12, "y":0}, {"x":13, "y":0, "w":2}, {"x":0, "y":1, "w":1.5}, {"x":1.5, "y":1}, {"x":2.5, "y":1}, {"x":3.5, "y":1}, {"x":4.5, "y":1}, {"x":5.5, "y":1}, {"x":6.5, "y":1}, {"x":7.5, "y":1}, {"x":8.5, "y":1}, {"x":9.5, "y":1}, {"x":10.5, "y":1}, {"x":11.5, "y":1}, {"x":12.5, "y":1}, {"x":13.5, "y":1, "w":1.5}, {"x":0, "y":2, "w":1.75}, {"x":1.75, "y":2}, {"x":2.75, "y":2}, {"x":3.75, "y":2}, {"x":4.75, "y":2}, {"x":5.75, "y":2}, {"x":6.75, "y":2}, {"x":7.75, "y":2}, {"x":8.75, "y":2}, {"x":9.75, "y":2}, {"x":10.75, "y":2}, {"x":11.75, "y":2}, {"x":12.75, "y":2, "w":2.25}, {"x":0, "y":3, "w":2.25}, {"x":2.25, "y":3}, {"x":3.25, "y":3}, {"x":4.25, "y":3}, {"x":5.25, "y":3}, {"x":6.25, "y":3}, {"x":7.25, "y":3}, {"x":8.25, "y":3}, {"x":9.25, "y":3}, {"x":10.25, "y":3}, {"x":11.25, "y":3}, {"x":12.25, "y":3, "w":2.75}, {"x":0, "y":4, "w":1.25}, {"x":1.25, "y":4, "w":1.25}, {"x":2.5, "y":4, "w":1.25}, {"x":3.75, "y":4, "w":6.25}, {"x":10, "y":4, "w":1.25}, {"x":11.25, "y":4, "w":1.25}, {"x":12.5, "y":4, "w":1.25}, {"x":13.75, "y":4, "w":1.25}]
|
||||||
|
},
|
||||||
|
|
||||||
|
"LAYOUT_60_hhkb": {
|
||||||
|
"layout": [{"label":"Esc", "x":0, "y":0}, {"label":"!", "x":1, "y":0}, {"label":"@", "x":2, "y":0}, {"label":"#", "x":3, "y":0}, {"label":"$", "x":4, "y":0}, {"label":"%", "x":5, "y":0}, {"label":"^", "x":6, "y":0}, {"label":"&", "x":7, "y":0}, {"label":"*", "x":8, "y":0}, {"label":"(", "x":9, "y":0}, {"label":")", "x":10, "y":0}, {"label":"_", "x":11, "y":0}, {"label":"+", "x":12, "y":0}, {"label":"|", "x":13, "y":0}, {"label":"~", "x":14, "y":0}, {"label":"Tab", "x":0, "y":1, "w":1.5}, {"label":"Q", "x":1.5, "y":1}, {"label":"W", "x":2.5, "y":1}, {"label":"E", "x":3.5, "y":1}, {"label":"R", "x":4.5, "y":1}, {"label":"T", "x":5.5, "y":1}, {"label":"Y", "x":6.5, "y":1}, {"label":"U", "x":7.5, "y":1}, {"label":"I", "x":8.5, "y":1}, {"label":"O", "x":9.5, "y":1}, {"label":"P", "x":10.5, "y":1}, {"label":"{", "x":11.5, "y":1}, {"label":"}", "x":12.5, "y":1}, {"label":"Delete", "x":13.5, "y":1, "w":1.5}, {"label":"Control", "x":0, "y":2, "w":1.75}, {"label":"A", "x":1.75, "y":2}, {"label":"S", "x":2.75, "y":2}, {"label":"D", "x":3.75, "y":2}, {"label":"F", "x":4.75, "y":2}, {"label":"G", "x":5.75, "y":2}, {"label":"H", "x":6.75, "y":2}, {"label":"J", "x":7.75, "y":2}, {"label":"K", "x":8.75, "y":2}, {"label":"L", "x":9.75, "y":2}, {"label":":", "x":10.75, "y":2}, {"label":"\"", "x":11.75, "y":2}, {"label":"Enter", "x":12.75, "y":2, "w":2.25}, {"label":"Shift", "x":0, "y":3, "w":2.25}, {"label":"Z", "x":2.25, "y":3}, {"label":"X", "x":3.25, "y":3}, {"label":"C", "x":4.25, "y":3}, {"label":"V", "x":5.25, "y":3}, {"label":"B", "x":6.25, "y":3}, {"label":"N", "x":7.25, "y":3}, {"label":"M", "x":8.25, "y":3}, {"label":"<", "x":9.25, "y":3}, {"label":">", "x":10.25, "y":3}, {"label":"?", "x":11.25, "y":3}, {"label":"Shift", "x":12.25, "y":3, "w":1.75}, {"label":"Fn", "x":14, "y":3}, {"label":"Os", "x":1.5, "y":4}, {"label":"Alt", "x":2.5, "y":4, "w":1.5}, {"x":4, "y":4, "w":7}, {"label":"Alt", "x":11, "y":4, "w":1.5}, {"label":"Os", "x":12.5, "y":4}]
|
||||||
|
},
|
||||||
|
|
||||||
|
"LAYOUT_60_tsangan": {
|
||||||
|
"layout": [{"x":0, "y":0}, {"x":1, "y":0}, {"x":2, "y":0}, {"x":3, "y":0}, {"x":4, "y":0}, {"x":5, "y":0}, {"x":6, "y":0}, {"x":7, "y":0}, {"x":8, "y":0}, {"x":9, "y":0}, {"x":10, "y":0}, {"x":11, "y":0}, {"x":12, "y":0}, {"x":13, "y":0}, {"x":14, "y":0}, {"x":0, "y":1, "w":1.5}, {"x":1.5, "y":1}, {"x":2.5, "y":1}, {"x":3.5, "y":1}, {"x":4.5, "y":1}, {"x":5.5, "y":1}, {"x":6.5, "y":1}, {"x":7.5, "y":1}, {"x":8.5, "y":1}, {"x":9.5, "y":1}, {"x":10.5, "y":1}, {"x":11.5, "y":1}, {"x":12.5, "y":1}, {"x":13.5, "y":1, "w":1.5}, {"x":0, "y":2, "w":1.75}, {"x":1.75, "y":2}, {"x":2.75, "y":2}, {"x":3.75, "y":2}, {"x":4.75, "y":2}, {"x":5.75, "y":2}, {"x":6.75, "y":2}, {"x":7.75, "y":2}, {"x":8.75, "y":2}, {"x":9.75, "y":2}, {"x":10.75, "y":2}, {"x":11.75, "y":2}, {"x":12.75, "y":2, "w":2.25}, {"x":0, "y":3, "w":2.25}, {"x":2.25, "y":3}, {"x":3.25, "y":3}, {"x":4.25, "y":3}, {"x":5.25, "y":3}, {"x":6.25, "y":3}, {"x":7.25, "y":3}, {"x":8.25, "y":3}, {"x":9.25, "y":3}, {"x":10.25, "y":3}, {"x":11.25, "y":3}, {"x":12.25, "y":3, "w":1.75}, {"x":14, "y":3}, {"x":0, "y":4, "w":1.5}, {"x":1.5, "y":4}, {"x":2.5, "y":4, "w":1.5}, {"x":4, "y":4, "w":7}, {"x":11, "y":4, "w":1.5}, {"x":12.5, "y":4}, {"x":13.5, "y":4, "w":1.5}]
|
||||||
|
}
|
||||||
|
}
|
||||||
|
}
|
||||||
19
keyboards/exclusive/e6v2/bmc/keymaps/default/config.h
Normal file
19
keyboards/exclusive/e6v2/bmc/keymaps/default/config.h
Normal file
@ -0,0 +1,19 @@
|
|||||||
|
/* Copyright 2019 MechMerlin
|
||||||
|
*
|
||||||
|
* This program is free software: you can redistribute it and/or modify
|
||||||
|
* it under the terms of the GNU General Public License as published by
|
||||||
|
* the Free Software Foundation, either version 2 of the License, or
|
||||||
|
* (at your option) any later version.
|
||||||
|
*
|
||||||
|
* This program is distributed in the hope that it will be useful,
|
||||||
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||||
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||||
|
* GNU General Public License for more details.
|
||||||
|
*
|
||||||
|
* You should have received a copy of the GNU General Public License
|
||||||
|
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||||
|
*/
|
||||||
|
|
||||||
|
#pragma once
|
||||||
|
|
||||||
|
// place overrides here
|
||||||
74
keyboards/exclusive/e6v2/bmc/keymaps/default/keymap.c
Normal file
74
keyboards/exclusive/e6v2/bmc/keymaps/default/keymap.c
Normal file
@ -0,0 +1,74 @@
|
|||||||
|
/* Copyright 2019 MechMerlin
|
||||||
|
*
|
||||||
|
* This program is free software: you can redistribute it and/or modify
|
||||||
|
* it under the terms of the GNU General Public License as published by
|
||||||
|
* the Free Software Foundation, either version 2 of the License, or
|
||||||
|
* (at your option) any later version.
|
||||||
|
*
|
||||||
|
* This program is distributed in the hope that it will be useful,
|
||||||
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||||
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||||
|
* GNU General Public License for more details.
|
||||||
|
*
|
||||||
|
* You should have received a copy of the GNU General Public License
|
||||||
|
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||||
|
*/
|
||||||
|
#include QMK_KEYBOARD_H
|
||||||
|
|
||||||
|
// Defines the keycodes used by our macros in process_record_user
|
||||||
|
enum custom_keycodes {
|
||||||
|
QMKBEST = SAFE_RANGE,
|
||||||
|
QMKURL
|
||||||
|
};
|
||||||
|
|
||||||
|
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
|
||||||
|
[0] = LAYOUT_60_ansi(
|
||||||
|
KC_GESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC,
|
||||||
|
KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS,
|
||||||
|
KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT,
|
||||||
|
KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT,
|
||||||
|
KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, KC_RGUI, KC_RCTL, MO(1)
|
||||||
|
),
|
||||||
|
|
||||||
|
[1] = LAYOUT_60_ansi(
|
||||||
|
KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_DEL, \
|
||||||
|
BL_TOGG, BL_INC, BL_DEC, BL_STEP, RESET, EEP_RST, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, \
|
||||||
|
RGB_TOG, RGB_MOD, RGB_HUI, RGB_SAI, RGB_VAI, RGB_SPI, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, \
|
||||||
|
KC_TRNS, RGB_RMOD, RGB_HUD, RGB_SAD, RGB_VAD, RGB_SPD, KC_TRNS, KC_MUTE, KC_VOLD, KC_VOLU, KC_TRNS, KC_TRNS, \
|
||||||
|
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS),
|
||||||
|
|
||||||
|
};
|
||||||
|
|
||||||
|
bool process_record_user(uint16_t keycode, keyrecord_t *record) {
|
||||||
|
switch (keycode) {
|
||||||
|
case QMKBEST:
|
||||||
|
if (record->event.pressed) {
|
||||||
|
// when keycode QMKBEST is pressed
|
||||||
|
SEND_STRING("QMK is the best thing ever!");
|
||||||
|
} else {
|
||||||
|
// when keycode QMKBEST is released
|
||||||
|
}
|
||||||
|
break;
|
||||||
|
case QMKURL:
|
||||||
|
if (record->event.pressed) {
|
||||||
|
// when keycode QMKURL is pressed
|
||||||
|
SEND_STRING("https://qmk.fm/" SS_TAP(X_ENTER));
|
||||||
|
} else {
|
||||||
|
// when keycode QMKURL is released
|
||||||
|
}
|
||||||
|
break;
|
||||||
|
}
|
||||||
|
return true;
|
||||||
|
}
|
||||||
|
|
||||||
|
void matrix_init_user(void) {
|
||||||
|
|
||||||
|
}
|
||||||
|
|
||||||
|
void matrix_scan_user(void) {
|
||||||
|
|
||||||
|
}
|
||||||
|
|
||||||
|
void led_set_user(uint8_t usb_led) {
|
||||||
|
|
||||||
|
}
|
||||||
1
keyboards/exclusive/e6v2/bmc/keymaps/default/readme.md
Normal file
1
keyboards/exclusive/e6v2/bmc/keymaps/default/readme.md
Normal file
@ -0,0 +1 @@
|
|||||||
|
# The default keymap for bmc
|
||||||
44
keyboards/exclusive/e6v2/bmc/readme.md
Normal file
44
keyboards/exclusive/e6v2/bmc/readme.md
Normal file
@ -0,0 +1,44 @@
|
|||||||
|
# E6-V2 Bootmapper Client (ps2avrgb)
|
||||||
|
|
||||||
|
These docs are for the BMC version of the E6-V2 PCB which has an atmega32a microcontroller. Please do not flash this `.hex` file on your atmega32u4 equipped E6-V2.
|
||||||
|
|
||||||
|
Keyboard Maintainer: [MechMerlin](https://github.com/mechmerlin)
|
||||||
|
Hardware Supported: ps2avrgb E6-V2 with atmega32a microcontroller
|
||||||
|
Hardware Availability: [geekhack.org/index.php?topic=90787.0](https://geekhack.org/index.php?topic=90787.0)
|
||||||
|
|
||||||
|
Make example for this keyboard (after setting up your build environment):
|
||||||
|
|
||||||
|
make exclusive/e6v2/bmc:default
|
||||||
|
|
||||||
|
Flashing
|
||||||
|
|
||||||
|
ps2avr(GB) boards use an atmega32a microcontroller and a different bootloader. It is not flashable using the regular QMK methods.
|
||||||
|
|
||||||
|
**Reset Key:** Hold down the key located at `K00`, commonly programmed as left control while plugging in the keyboard. You may also hold down the key located at `K50`, commonly programmed as the escape key.
|
||||||
|
|
||||||
|
Windows:
|
||||||
|
1. Download [HIDBootFlash](http://vusb.wikidot.com/project:hidbootflash).
|
||||||
|
2. Place your keyboard into reset.
|
||||||
|
3. Press the `Find Device` button and ensure that your keyboard is found.
|
||||||
|
4. Press the `Open .hex File` button and locate the `.hex` file you created.
|
||||||
|
5. Press the `Flash Device` button and wait for the process to complete.
|
||||||
|
|
||||||
|
macOS:
|
||||||
|
1. Install homebrew by typing the following:
|
||||||
|
```
|
||||||
|
/usr/bin/ruby -e "$(curl -fsSL https://raw.githubusercontent.com/Homebrew/install/master/install)"
|
||||||
|
```
|
||||||
|
2. Install `crosspack-avr`.
|
||||||
|
```
|
||||||
|
brew cask install crosspack-avr
|
||||||
|
```
|
||||||
|
3. Install the following packages:
|
||||||
|
```
|
||||||
|
brew install python
|
||||||
|
pip3 install pyusb
|
||||||
|
brew install --HEAD`https://raw.githubusercontent.com/robertgzr/homebrew-tap/master/bootloadhid.rb
|
||||||
|
|
||||||
|
4. Place your keyboard into reset.
|
||||||
|
5. Flash the board by typing `bootloadHID -r` followed by the path to your `.hex` file.
|
||||||
|
|
||||||
|
See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
|
||||||
90
keyboards/exclusive/e6v2/bmc/rules.mk
Normal file
90
keyboards/exclusive/e6v2/bmc/rules.mk
Normal file
@ -0,0 +1,90 @@
|
|||||||
|
# MCU name
|
||||||
|
#MCU = at90usb1286
|
||||||
|
MCU = atmega32a
|
||||||
|
PROTOCOL = VUSB
|
||||||
|
|
||||||
|
NO_UART = yes
|
||||||
|
NO_SUSPEND_POWER_DOWN = yes
|
||||||
|
|
||||||
|
# Processor frequency.
|
||||||
|
# This will define a symbol, F_CPU, in all source code files equal to the
|
||||||
|
# processor frequency in Hz. You can then use this symbol in your source code to
|
||||||
|
# calculate timings. Do NOT tack on a 'UL' at the end, this will be done
|
||||||
|
# automatically to create a 32-bit value in your source code.
|
||||||
|
#
|
||||||
|
# This will be an integer division of F_USB below, as it is sourced by
|
||||||
|
# F_USB after it has run through any CPU prescalers. Note that this value
|
||||||
|
# does not *change* the processor frequency - it should merely be updated to
|
||||||
|
# reflect the processor speed set externally so that the code can use accurate
|
||||||
|
# software delays.
|
||||||
|
F_CPU = 12000000
|
||||||
|
|
||||||
|
|
||||||
|
#
|
||||||
|
# LUFA specific
|
||||||
|
#
|
||||||
|
# Target architecture (see library "Board Types" documentation).
|
||||||
|
# ARCH = AVR8
|
||||||
|
|
||||||
|
# Input clock frequency.
|
||||||
|
# This will define a symbol, F_USB, in all source code files equal to the
|
||||||
|
# input clock frequency (before any prescaling is performed) in Hz. This value may
|
||||||
|
# differ from F_CPU if prescaling is used on the latter, and is required as the
|
||||||
|
# raw input clock is fed directly to the PLL sections of the AVR for high speed
|
||||||
|
# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
|
||||||
|
# at the end, this will be done automatically to create a 32-bit value in your
|
||||||
|
# source code.
|
||||||
|
#
|
||||||
|
# If no clock division is performed on the input clock inside the AVR (via the
|
||||||
|
# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
|
||||||
|
# F_USB = $(F_CPU)
|
||||||
|
|
||||||
|
# Interrupt driven control endpoint task(+60)
|
||||||
|
OPT_DEFS = -DDEBUG_LEVEL=0
|
||||||
|
|
||||||
|
|
||||||
|
# Bootloader selection
|
||||||
|
# Teensy halfkay
|
||||||
|
# Pro Micro caterina
|
||||||
|
# Atmel DFU atmel-dfu
|
||||||
|
# LUFA DFU lufa-dfu
|
||||||
|
# QMK DFU qmk-dfu
|
||||||
|
# atmega32a bootloadHID
|
||||||
|
BOOTLOADER = bootloadHID
|
||||||
|
|
||||||
|
|
||||||
|
# If you don't know the bootloader type, then you can specify the
|
||||||
|
# Boot Section Size in *bytes* by uncommenting out the OPT_DEFS line
|
||||||
|
# Teensy halfKay 512
|
||||||
|
# Teensy++ halfKay 1024
|
||||||
|
# Atmel DFU loader 4096
|
||||||
|
# LUFA bootloader 4096
|
||||||
|
# USBaspLoader 2048
|
||||||
|
# OPT_DEFS += -DBOOTLOADER_SIZE=4096
|
||||||
|
|
||||||
|
|
||||||
|
# Build Options
|
||||||
|
# change yes to no to disable
|
||||||
|
#
|
||||||
|
BOOTMAGIC_ENABLE = lite # Virtual DIP switch configuration(+1000)
|
||||||
|
MOUSEKEY_ENABLE = yes # Mouse keys(+4700)
|
||||||
|
EXTRAKEY_ENABLE = yes # Audio control and System control(+450)
|
||||||
|
CONSOLE_ENABLE = yes # Console for debug(+400)
|
||||||
|
COMMAND_ENABLE = yes # Commands for debug and configuration
|
||||||
|
# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
|
||||||
|
SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
|
||||||
|
# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
|
||||||
|
NKRO_ENABLE = no # USB Nkey Rollover
|
||||||
|
BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality on B7 by default
|
||||||
|
RGBLIGHT_CUSTOM_DRIVER = yes
|
||||||
|
RGBLIGHT_ENABLE = yes # Enable keyboard RGB underglow
|
||||||
|
MIDI_ENABLE = no # MIDI support (+2400 to 4200, depending on config)
|
||||||
|
UNICODE_ENABLE = no # Unicode
|
||||||
|
BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
|
||||||
|
AUDIO_ENABLE = no # Audio output on port C6
|
||||||
|
FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches
|
||||||
|
HD44780_ENABLE = no # Enable support for HD44780 based LCDs (+400)
|
||||||
|
|
||||||
|
SRC += i2c_master.c
|
||||||
|
|
||||||
|
PROGRAM_CMD = ./util/atmega32a_program.py $(TARGET).hex
|
||||||
393
keyboards/exclusive/e6v2/bmc/usbconfig.h
Normal file
393
keyboards/exclusive/e6v2/bmc/usbconfig.h
Normal file
@ -0,0 +1,393 @@
|
|||||||
|
/* Name: usbconfig.h
|
||||||
|
* Project: V-USB, virtual USB port for Atmel's(r) AVR(r) microcontrollers
|
||||||
|
* Author: Christian Starkjohann
|
||||||
|
* Creation Date: 2005-04-01
|
||||||
|
* Tabsize: 4
|
||||||
|
* Copyright: (c) 2005 by OBJECTIVE DEVELOPMENT Software GmbH
|
||||||
|
* License: GNU GPL v2 (see License.txt), GNU GPL v3 or proprietary (CommercialLicense.txt)
|
||||||
|
* This Revision: $Id: usbconfig-prototype.h 785 2010-05-30 17:57:07Z cs $
|
||||||
|
*/
|
||||||
|
|
||||||
|
#pragma once
|
||||||
|
|
||||||
|
#include "config.h"
|
||||||
|
|
||||||
|
/*
|
||||||
|
General Description:
|
||||||
|
This file is an example configuration (with inline documentation) for the USB
|
||||||
|
driver. It configures V-USB for USB D+ connected to Port D bit 2 (which is
|
||||||
|
also hardware interrupt 0 on many devices) and USB D- to Port D bit 4. You may
|
||||||
|
wire the lines to any other port, as long as D+ is also wired to INT0 (or any
|
||||||
|
other hardware interrupt, as long as it is the highest level interrupt, see
|
||||||
|
section at the end of this file).
|
||||||
|
*/
|
||||||
|
|
||||||
|
/* ---------------------------- Hardware Config ---------------------------- */
|
||||||
|
|
||||||
|
#define USB_CFG_IOPORTNAME D
|
||||||
|
/* This is the port where the USB bus is connected. When you configure it to
|
||||||
|
* "B", the registers PORTB, PINB and DDRB will be used.
|
||||||
|
*/
|
||||||
|
#define USB_CFG_DMINUS_BIT 3
|
||||||
|
/* This is the bit number in USB_CFG_IOPORT where the USB D- line is connected.
|
||||||
|
* This may be any bit in the port.
|
||||||
|
*/
|
||||||
|
#define USB_CFG_DPLUS_BIT 2
|
||||||
|
/* This is the bit number in USB_CFG_IOPORT where the USB D+ line is connected.
|
||||||
|
* This may be any bit in the port. Please note that D+ must also be connected
|
||||||
|
* to interrupt pin INT0! [You can also use other interrupts, see section
|
||||||
|
* "Optional MCU Description" below, or you can connect D- to the interrupt, as
|
||||||
|
* it is required if you use the USB_COUNT_SOF feature. If you use D- for the
|
||||||
|
* interrupt, the USB interrupt will also be triggered at Start-Of-Frame
|
||||||
|
* markers every millisecond.]
|
||||||
|
*/
|
||||||
|
#define USB_CFG_CLOCK_KHZ (F_CPU/1000)
|
||||||
|
/* Clock rate of the AVR in kHz. Legal values are 12000, 12800, 15000, 16000,
|
||||||
|
* 16500, 18000 and 20000. The 12.8 MHz and 16.5 MHz versions of the code
|
||||||
|
* require no crystal, they tolerate +/- 1% deviation from the nominal
|
||||||
|
* frequency. All other rates require a precision of 2000 ppm and thus a
|
||||||
|
* crystal!
|
||||||
|
* Since F_CPU should be defined to your actual clock rate anyway, you should
|
||||||
|
* not need to modify this setting.
|
||||||
|
*/
|
||||||
|
#define USB_CFG_CHECK_CRC 0
|
||||||
|
/* Define this to 1 if you want that the driver checks integrity of incoming
|
||||||
|
* data packets (CRC checks). CRC checks cost quite a bit of code size and are
|
||||||
|
* currently only available for 18 MHz crystal clock. You must choose
|
||||||
|
* USB_CFG_CLOCK_KHZ = 18000 if you enable this option.
|
||||||
|
*/
|
||||||
|
|
||||||
|
/* ----------------------- Optional Hardware Config ------------------------ */
|
||||||
|
|
||||||
|
/* #define USB_CFG_PULLUP_IOPORTNAME D */
|
||||||
|
/* If you connect the 1.5k pullup resistor from D- to a port pin instead of
|
||||||
|
* V+, you can connect and disconnect the device from firmware by calling
|
||||||
|
* the macros usbDeviceConnect() and usbDeviceDisconnect() (see usbdrv.h).
|
||||||
|
* This constant defines the port on which the pullup resistor is connected.
|
||||||
|
*/
|
||||||
|
/* #define USB_CFG_PULLUP_BIT 4 */
|
||||||
|
/* This constant defines the bit number in USB_CFG_PULLUP_IOPORT (defined
|
||||||
|
* above) where the 1.5k pullup resistor is connected. See description
|
||||||
|
* above for details.
|
||||||
|
*/
|
||||||
|
|
||||||
|
/* --------------------------- Functional Range ---------------------------- */
|
||||||
|
|
||||||
|
#define USB_CFG_HAVE_INTRIN_ENDPOINT 1
|
||||||
|
/* Define this to 1 if you want to compile a version with two endpoints: The
|
||||||
|
* default control endpoint 0 and an interrupt-in endpoint (any other endpoint
|
||||||
|
* number).
|
||||||
|
*/
|
||||||
|
#define USB_CFG_HAVE_INTRIN_ENDPOINT3 1
|
||||||
|
/* Define this to 1 if you want to compile a version with three endpoints: The
|
||||||
|
* default control endpoint 0, an interrupt-in endpoint 3 (or the number
|
||||||
|
* configured below) and a catch-all default interrupt-in endpoint as above.
|
||||||
|
* You must also define USB_CFG_HAVE_INTRIN_ENDPOINT to 1 for this feature.
|
||||||
|
*/
|
||||||
|
#define USB_CFG_EP3_NUMBER 3
|
||||||
|
/* If the so-called endpoint 3 is used, it can now be configured to any other
|
||||||
|
* endpoint number (except 0) with this macro. Default if undefined is 3.
|
||||||
|
*/
|
||||||
|
/* #define USB_INITIAL_DATATOKEN USBPID_DATA1 */
|
||||||
|
/* The above macro defines the startup condition for data toggling on the
|
||||||
|
* interrupt/bulk endpoints 1 and 3. Defaults to USBPID_DATA1.
|
||||||
|
* Since the token is toggled BEFORE sending any data, the first packet is
|
||||||
|
* sent with the oposite value of this configuration!
|
||||||
|
*/
|
||||||
|
#define USB_CFG_IMPLEMENT_HALT 0
|
||||||
|
/* Define this to 1 if you also want to implement the ENDPOINT_HALT feature
|
||||||
|
* for endpoint 1 (interrupt endpoint). Although you may not need this feature,
|
||||||
|
* it is required by the standard. We have made it a config option because it
|
||||||
|
* bloats the code considerably.
|
||||||
|
*/
|
||||||
|
#define USB_CFG_SUPPRESS_INTR_CODE 0
|
||||||
|
/* Define this to 1 if you want to declare interrupt-in endpoints, but don't
|
||||||
|
* want to send any data over them. If this macro is defined to 1, functions
|
||||||
|
* usbSetInterrupt() and usbSetInterrupt3() are omitted. This is useful if
|
||||||
|
* you need the interrupt-in endpoints in order to comply to an interface
|
||||||
|
* (e.g. HID), but never want to send any data. This option saves a couple
|
||||||
|
* of bytes in flash memory and the transmit buffers in RAM.
|
||||||
|
*/
|
||||||
|
#define USB_CFG_INTR_POLL_INTERVAL 1
|
||||||
|
/* If you compile a version with endpoint 1 (interrupt-in), this is the poll
|
||||||
|
* interval. The value is in milliseconds and must not be less than 10 ms for
|
||||||
|
* low speed devices.
|
||||||
|
*/
|
||||||
|
#define USB_CFG_IS_SELF_POWERED 0
|
||||||
|
/* Define this to 1 if the device has its own power supply. Set it to 0 if the
|
||||||
|
* device is powered from the USB bus.
|
||||||
|
*/
|
||||||
|
#define USB_CFG_MAX_BUS_POWER 500
|
||||||
|
/* Set this variable to the maximum USB bus power consumption of your device.
|
||||||
|
* The value is in milliamperes. [It will be divided by two since USB
|
||||||
|
* communicates power requirements in units of 2 mA.]
|
||||||
|
*/
|
||||||
|
#define USB_CFG_IMPLEMENT_FN_WRITE 1
|
||||||
|
/* Set this to 1 if you want usbFunctionWrite() to be called for control-out
|
||||||
|
* transfers. Set it to 0 if you don't need it and want to save a couple of
|
||||||
|
* bytes.
|
||||||
|
*/
|
||||||
|
#define USB_CFG_IMPLEMENT_FN_READ 0
|
||||||
|
/* Set this to 1 if you need to send control replies which are generated
|
||||||
|
* "on the fly" when usbFunctionRead() is called. If you only want to send
|
||||||
|
* data from a static buffer, set it to 0 and return the data from
|
||||||
|
* usbFunctionSetup(). This saves a couple of bytes.
|
||||||
|
*/
|
||||||
|
#define USB_CFG_IMPLEMENT_FN_WRITEOUT 0
|
||||||
|
/* Define this to 1 if you want to use interrupt-out (or bulk out) endpoints.
|
||||||
|
* You must implement the function usbFunctionWriteOut() which receives all
|
||||||
|
* interrupt/bulk data sent to any endpoint other than 0. The endpoint number
|
||||||
|
* can be found in 'usbRxToken'.
|
||||||
|
*/
|
||||||
|
#define USB_CFG_HAVE_FLOWCONTROL 0
|
||||||
|
/* Define this to 1 if you want flowcontrol over USB data. See the definition
|
||||||
|
* of the macros usbDisableAllRequests() and usbEnableAllRequests() in
|
||||||
|
* usbdrv.h.
|
||||||
|
*/
|
||||||
|
#define USB_CFG_DRIVER_FLASH_PAGE 0
|
||||||
|
/* If the device has more than 64 kBytes of flash, define this to the 64 k page
|
||||||
|
* where the driver's constants (descriptors) are located. Or in other words:
|
||||||
|
* Define this to 1 for boot loaders on the ATMega128.
|
||||||
|
*/
|
||||||
|
#define USB_CFG_LONG_TRANSFERS 0
|
||||||
|
/* Define this to 1 if you want to send/receive blocks of more than 254 bytes
|
||||||
|
* in a single control-in or control-out transfer. Note that the capability
|
||||||
|
* for long transfers increases the driver size.
|
||||||
|
*/
|
||||||
|
/* #define USB_RX_USER_HOOK(data, len) if(usbRxToken == (uchar)USBPID_SETUP) blinkLED(); */
|
||||||
|
/* This macro is a hook if you want to do unconventional things. If it is
|
||||||
|
* defined, it's inserted at the beginning of received message processing.
|
||||||
|
* If you eat the received message and don't want default processing to
|
||||||
|
* proceed, do a return after doing your things. One possible application
|
||||||
|
* (besides debugging) is to flash a status LED on each packet.
|
||||||
|
*/
|
||||||
|
/* #define USB_RESET_HOOK(resetStarts) if(!resetStarts){hadUsbReset();} */
|
||||||
|
/* This macro is a hook if you need to know when an USB RESET occurs. It has
|
||||||
|
* one parameter which distinguishes between the start of RESET state and its
|
||||||
|
* end.
|
||||||
|
*/
|
||||||
|
/* #define USB_SET_ADDRESS_HOOK() hadAddressAssigned(); */
|
||||||
|
/* This macro (if defined) is executed when a USB SET_ADDRESS request was
|
||||||
|
* received.
|
||||||
|
*/
|
||||||
|
#define USB_COUNT_SOF 1
|
||||||
|
/* define this macro to 1 if you need the global variable "usbSofCount" which
|
||||||
|
* counts SOF packets. This feature requires that the hardware interrupt is
|
||||||
|
* connected to D- instead of D+.
|
||||||
|
*/
|
||||||
|
/* #ifdef __ASSEMBLER__
|
||||||
|
* macro myAssemblerMacro
|
||||||
|
* in YL, TCNT0
|
||||||
|
* sts timer0Snapshot, YL
|
||||||
|
* endm
|
||||||
|
* #endif
|
||||||
|
* #define USB_SOF_HOOK myAssemblerMacro
|
||||||
|
* This macro (if defined) is executed in the assembler module when a
|
||||||
|
* Start Of Frame condition is detected. It is recommended to define it to
|
||||||
|
* the name of an assembler macro which is defined here as well so that more
|
||||||
|
* than one assembler instruction can be used. The macro may use the register
|
||||||
|
* YL and modify SREG. If it lasts longer than a couple of cycles, USB messages
|
||||||
|
* immediately after an SOF pulse may be lost and must be retried by the host.
|
||||||
|
* What can you do with this hook? Since the SOF signal occurs exactly every
|
||||||
|
* 1 ms (unless the host is in sleep mode), you can use it to tune OSCCAL in
|
||||||
|
* designs running on the internal RC oscillator.
|
||||||
|
* Please note that Start Of Frame detection works only if D- is wired to the
|
||||||
|
* interrupt, not D+. THIS IS DIFFERENT THAN MOST EXAMPLES!
|
||||||
|
*/
|
||||||
|
#define USB_CFG_CHECK_DATA_TOGGLING 0
|
||||||
|
/* define this macro to 1 if you want to filter out duplicate data packets
|
||||||
|
* sent by the host. Duplicates occur only as a consequence of communication
|
||||||
|
* errors, when the host does not receive an ACK. Please note that you need to
|
||||||
|
* implement the filtering yourself in usbFunctionWriteOut() and
|
||||||
|
* usbFunctionWrite(). Use the global usbCurrentDataToken and a static variable
|
||||||
|
* for each control- and out-endpoint to check for duplicate packets.
|
||||||
|
*/
|
||||||
|
#define USB_CFG_HAVE_MEASURE_FRAME_LENGTH 0
|
||||||
|
/* define this macro to 1 if you want the function usbMeasureFrameLength()
|
||||||
|
* compiled in. This function can be used to calibrate the AVR's RC oscillator.
|
||||||
|
*/
|
||||||
|
#define USB_USE_FAST_CRC 0
|
||||||
|
/* The assembler module has two implementations for the CRC algorithm. One is
|
||||||
|
* faster, the other is smaller. This CRC routine is only used for transmitted
|
||||||
|
* messages where timing is not critical. The faster routine needs 31 cycles
|
||||||
|
* per byte while the smaller one needs 61 to 69 cycles. The faster routine
|
||||||
|
* may be worth the 32 bytes bigger code size if you transmit lots of data and
|
||||||
|
* run the AVR close to its limit.
|
||||||
|
*/
|
||||||
|
|
||||||
|
/* -------------------------- Device Description --------------------------- */
|
||||||
|
|
||||||
|
#define USB_CFG_VENDOR_ID (VENDOR_ID & 0xFF), ((VENDOR_ID >> 8) & 0xFF)
|
||||||
|
/* USB vendor ID for the device, low byte first. If you have registered your
|
||||||
|
* own Vendor ID, define it here. Otherwise you may use one of obdev's free
|
||||||
|
* shared VID/PID pairs. Be sure to read USB-IDs-for-free.txt for rules!
|
||||||
|
* *** IMPORTANT NOTE ***
|
||||||
|
* This template uses obdev's shared VID/PID pair for Vendor Class devices
|
||||||
|
* with libusb: 0x16c0/0x5dc. Use this VID/PID pair ONLY if you understand
|
||||||
|
* the implications!
|
||||||
|
*/
|
||||||
|
#define USB_CFG_DEVICE_ID (PRODUCT_ID & 0xFF), ((PRODUCT_ID >> 8) & 0xFF)
|
||||||
|
/* This is the ID of the product, low byte first. It is interpreted in the
|
||||||
|
* scope of the vendor ID. If you have registered your own VID with usb.org
|
||||||
|
* or if you have licensed a PID from somebody else, define it here. Otherwise
|
||||||
|
* you may use one of obdev's free shared VID/PID pairs. See the file
|
||||||
|
* USB-IDs-for-free.txt for details!
|
||||||
|
* *** IMPORTANT NOTE ***
|
||||||
|
* This template uses obdev's shared VID/PID pair for Vendor Class devices
|
||||||
|
* with libusb: 0x16c0/0x5dc. Use this VID/PID pair ONLY if you understand
|
||||||
|
* the implications!
|
||||||
|
*/
|
||||||
|
#define USB_CFG_DEVICE_VERSION 0x00, 0x02
|
||||||
|
/* Version number of the device: Minor number first, then major number.
|
||||||
|
*/
|
||||||
|
#define USB_CFG_VENDOR_NAME 'G', 'r', 'a', 'y', ' ', 'S', 't', 'u', 'd', 'i', 'o'
|
||||||
|
#define USB_CFG_VENDOR_NAME_LEN 11
|
||||||
|
/* These two values define the vendor name returned by the USB device. The name
|
||||||
|
* must be given as a list of characters under single quotes. The characters
|
||||||
|
* are interpreted as Unicode (UTF-16) entities.
|
||||||
|
* If you don't want a vendor name string, undefine these macros.
|
||||||
|
* ALWAYS define a vendor name containing your Internet domain name if you use
|
||||||
|
* obdev's free shared VID/PID pair. See the file USB-IDs-for-free.txt for
|
||||||
|
* details.
|
||||||
|
*/
|
||||||
|
#define USB_CFG_DEVICE_NAME 'H', 'B', '8', '5'
|
||||||
|
#define USB_CFG_DEVICE_NAME_LEN 4
|
||||||
|
/* Same as above for the device name. If you don't want a device name, undefine
|
||||||
|
* the macros. See the file USB-IDs-for-free.txt before you assign a name if
|
||||||
|
* you use a shared VID/PID.
|
||||||
|
*/
|
||||||
|
/*#define USB_CFG_SERIAL_NUMBER 'N', 'o', 'n', 'e' */
|
||||||
|
/*#define USB_CFG_SERIAL_NUMBER_LEN 0 */
|
||||||
|
/* Same as above for the serial number. If you don't want a serial number,
|
||||||
|
* undefine the macros.
|
||||||
|
* It may be useful to provide the serial number through other means than at
|
||||||
|
* compile time. See the section about descriptor properties below for how
|
||||||
|
* to fine tune control over USB descriptors such as the string descriptor
|
||||||
|
* for the serial number.
|
||||||
|
*/
|
||||||
|
#define USB_CFG_DEVICE_CLASS 0
|
||||||
|
#define USB_CFG_DEVICE_SUBCLASS 0
|
||||||
|
/* See USB specification if you want to conform to an existing device class.
|
||||||
|
* Class 0xff is "vendor specific".
|
||||||
|
*/
|
||||||
|
#define USB_CFG_INTERFACE_CLASS 3 /* HID */
|
||||||
|
#define USB_CFG_INTERFACE_SUBCLASS 1 /* Boot */
|
||||||
|
#define USB_CFG_INTERFACE_PROTOCOL 1 /* Keyboard */
|
||||||
|
/* See USB specification if you want to conform to an existing device class or
|
||||||
|
* protocol. The following classes must be set at interface level:
|
||||||
|
* HID class is 3, no subclass and protocol required (but may be useful!)
|
||||||
|
* CDC class is 2, use subclass 2 and protocol 1 for ACM
|
||||||
|
*/
|
||||||
|
#define USB_CFG_HID_REPORT_DESCRIPTOR_LENGTH 0
|
||||||
|
/* Define this to the length of the HID report descriptor, if you implement
|
||||||
|
* an HID device. Otherwise don't define it or define it to 0.
|
||||||
|
* If you use this define, you must add a PROGMEM character array named
|
||||||
|
* "usbHidReportDescriptor" to your code which contains the report descriptor.
|
||||||
|
* Don't forget to keep the array and this define in sync!
|
||||||
|
*/
|
||||||
|
|
||||||
|
/* #define USB_PUBLIC static */
|
||||||
|
/* Use the define above if you #include usbdrv.c instead of linking against it.
|
||||||
|
* This technique saves a couple of bytes in flash memory.
|
||||||
|
*/
|
||||||
|
|
||||||
|
/* ------------------- Fine Control over USB Descriptors ------------------- */
|
||||||
|
/* If you don't want to use the driver's default USB descriptors, you can
|
||||||
|
* provide our own. These can be provided as (1) fixed length static data in
|
||||||
|
* flash memory, (2) fixed length static data in RAM or (3) dynamically at
|
||||||
|
* runtime in the function usbFunctionDescriptor(). See usbdrv.h for more
|
||||||
|
* information about this function.
|
||||||
|
* Descriptor handling is configured through the descriptor's properties. If
|
||||||
|
* no properties are defined or if they are 0, the default descriptor is used.
|
||||||
|
* Possible properties are:
|
||||||
|
* + USB_PROP_IS_DYNAMIC: The data for the descriptor should be fetched
|
||||||
|
* at runtime via usbFunctionDescriptor(). If the usbMsgPtr mechanism is
|
||||||
|
* used, the data is in FLASH by default. Add property USB_PROP_IS_RAM if
|
||||||
|
* you want RAM pointers.
|
||||||
|
* + USB_PROP_IS_RAM: The data returned by usbFunctionDescriptor() or found
|
||||||
|
* in static memory is in RAM, not in flash memory.
|
||||||
|
* + USB_PROP_LENGTH(len): If the data is in static memory (RAM or flash),
|
||||||
|
* the driver must know the descriptor's length. The descriptor itself is
|
||||||
|
* found at the address of a well known identifier (see below).
|
||||||
|
* List of static descriptor names (must be declared PROGMEM if in flash):
|
||||||
|
* char usbDescriptorDevice[];
|
||||||
|
* char usbDescriptorConfiguration[];
|
||||||
|
* char usbDescriptorHidReport[];
|
||||||
|
* char usbDescriptorString0[];
|
||||||
|
* int usbDescriptorStringVendor[];
|
||||||
|
* int usbDescriptorStringDevice[];
|
||||||
|
* int usbDescriptorStringSerialNumber[];
|
||||||
|
* Other descriptors can't be provided statically, they must be provided
|
||||||
|
* dynamically at runtime.
|
||||||
|
*
|
||||||
|
* Descriptor properties are or-ed or added together, e.g.:
|
||||||
|
* #define USB_CFG_DESCR_PROPS_DEVICE (USB_PROP_IS_RAM | USB_PROP_LENGTH(18))
|
||||||
|
*
|
||||||
|
* The following descriptors are defined:
|
||||||
|
* USB_CFG_DESCR_PROPS_DEVICE
|
||||||
|
* USB_CFG_DESCR_PROPS_CONFIGURATION
|
||||||
|
* USB_CFG_DESCR_PROPS_STRINGS
|
||||||
|
* USB_CFG_DESCR_PROPS_STRING_0
|
||||||
|
* USB_CFG_DESCR_PROPS_STRING_VENDOR
|
||||||
|
* USB_CFG_DESCR_PROPS_STRING_PRODUCT
|
||||||
|
* USB_CFG_DESCR_PROPS_STRING_SERIAL_NUMBER
|
||||||
|
* USB_CFG_DESCR_PROPS_HID
|
||||||
|
* USB_CFG_DESCR_PROPS_HID_REPORT
|
||||||
|
* USB_CFG_DESCR_PROPS_UNKNOWN (for all descriptors not handled by the driver)
|
||||||
|
*
|
||||||
|
* Note about string descriptors: String descriptors are not just strings, they
|
||||||
|
* are Unicode strings prefixed with a 2 byte header. Example:
|
||||||
|
* int serialNumberDescriptor[] = {
|
||||||
|
* USB_STRING_DESCRIPTOR_HEADER(6),
|
||||||
|
* 'S', 'e', 'r', 'i', 'a', 'l'
|
||||||
|
* };
|
||||||
|
*/
|
||||||
|
|
||||||
|
#define USB_CFG_DESCR_PROPS_DEVICE 0
|
||||||
|
#define USB_CFG_DESCR_PROPS_CONFIGURATION USB_PROP_IS_DYNAMIC
|
||||||
|
//#define USB_CFG_DESCR_PROPS_CONFIGURATION 0
|
||||||
|
#define USB_CFG_DESCR_PROPS_STRINGS 0
|
||||||
|
#define USB_CFG_DESCR_PROPS_STRING_0 0
|
||||||
|
#define USB_CFG_DESCR_PROPS_STRING_VENDOR 0
|
||||||
|
#define USB_CFG_DESCR_PROPS_STRING_PRODUCT 0
|
||||||
|
#define USB_CFG_DESCR_PROPS_STRING_SERIAL_NUMBER 0
|
||||||
|
#define USB_CFG_DESCR_PROPS_HID USB_PROP_IS_DYNAMIC
|
||||||
|
//#define USB_CFG_DESCR_PROPS_HID 0
|
||||||
|
#define USB_CFG_DESCR_PROPS_HID_REPORT USB_PROP_IS_DYNAMIC
|
||||||
|
//#define USB_CFG_DESCR_PROPS_HID_REPORT 0
|
||||||
|
#define USB_CFG_DESCR_PROPS_UNKNOWN 0
|
||||||
|
|
||||||
|
#define usbMsgPtr_t unsigned short
|
||||||
|
/* If usbMsgPtr_t is not defined, it defaults to 'uchar *'. We define it to
|
||||||
|
* a scalar type here because gcc generates slightly shorter code for scalar
|
||||||
|
* arithmetics than for pointer arithmetics. Remove this define for backward
|
||||||
|
* type compatibility or define it to an 8 bit type if you use data in RAM only
|
||||||
|
* and all RAM is below 256 bytes (tiny memory model in IAR CC).
|
||||||
|
*/
|
||||||
|
|
||||||
|
/* ----------------------- Optional MCU Description ------------------------ */
|
||||||
|
|
||||||
|
/* The following configurations have working defaults in usbdrv.h. You
|
||||||
|
* usually don't need to set them explicitly. Only if you want to run
|
||||||
|
* the driver on a device which is not yet supported or with a compiler
|
||||||
|
* which is not fully supported (such as IAR C) or if you use a differnt
|
||||||
|
* interrupt than INT0, you may have to define some of these.
|
||||||
|
*/
|
||||||
|
/* #define USB_INTR_CFG MCUCR */
|
||||||
|
/* #define USB_INTR_CFG_SET ((1 << ISC00) | (1 << ISC01)) */
|
||||||
|
/* #define USB_INTR_CFG_CLR 0 */
|
||||||
|
/* #define USB_INTR_ENABLE GIMSK */
|
||||||
|
/* #define USB_INTR_ENABLE_BIT INT0 */
|
||||||
|
/* #define USB_INTR_PENDING GIFR */
|
||||||
|
/* #define USB_INTR_PENDING_BIT INTF0 */
|
||||||
|
/* #define USB_INTR_VECTOR INT0_vect */
|
||||||
|
|
||||||
|
/* Set INT1 for D- falling edge to count SOF */
|
||||||
|
/* #define USB_INTR_CFG EICRA */
|
||||||
|
#define USB_INTR_CFG_SET ((1 << ISC11) | (0 << ISC10))
|
||||||
|
/* #define USB_INTR_CFG_CLR 0 */
|
||||||
|
/* #define USB_INTR_ENABLE EIMSK */
|
||||||
|
#define USB_INTR_ENABLE_BIT INT1
|
||||||
|
/* #define USB_INTR_PENDING EIFR */
|
||||||
|
#define USB_INTR_PENDING_BIT INTF1
|
||||||
|
#define USB_INTR_VECTOR INT1_vect
|
||||||
Loading…
Reference in New Issue
Block a user