* Initial support for Evolv75
* Fix encoder directional and layer support
* Invert knob directions
* Remove info.json and updated README
* Update keyboards/evolv/evolv.c
Update encoder_update call
Co-authored-by: Drashna Jaelre <drashna@live.com>
* Update keyboards/evolv/config.h
Remove description field from USB descriptors
Co-authored-by: Drashna Jaelre <drashna@live.com>
* Remove KC_NO define from default keymap
* Update config.h
New USB descriptor ID numbers
* Update keyboards/evolv/rules.mk
Remove words from bluetooth and audio enable comments
Co-authored-by: Ryan <fauxpark@gmail.com>
* Update keyboards/evolv/rules.mk
Enable full bootmagic
Co-authored-by: Ryan <fauxpark@gmail.com>
* Add info.json for QMK Configurator
* Edit copyright info, add VIA initial support
* Fix KC_NO seven underscores issue in keymap definitions
* Update info.json
* Update info.json
* ANSI and ISO layouts, info.json file with both
* Reorganized layouts to match info.json order
Co-authored-by: Gondolindrim <alvaro.augusto.volpato@gmail.com>
Co-authored-by: Drashna Jaelre <drashna@live.com>
Co-authored-by: Ryan <fauxpark@gmail.com>
* Add proper prototypes for Tap-Hold Per Key functions
* Fix handwired/tennie default keymap
* Remove unneeded references
* Fix tapping term per key check in space cadet
* Pre-emptive fix for tap dance
* Fix marksard/leftover30
* Replace hard coded tapping term with define
* Add GKB-M16 Macro Pad
Add GKB-M16 (gkb_m16) Macro Pad under gkeyboard
* Update keyboards/gkeyboard/gkb_m16/config.h
Co-authored-by: Joel Challis <git@zvecr.com>
* Update keyboards/gkeyboard/gkb_m16/keymaps/via/keymap.c
Co-authored-by: Joel Challis <git@zvecr.com>
* Update keyboards/gkeyboard/gkb_m16/info.json
Co-authored-by: Ryan <fauxpark@gmail.com>
* Update keyboards/gkeyboard/gkb_m16/keymaps/default/keymap.c
Co-authored-by: Ryan <fauxpark@gmail.com>
Co-authored-by: Joel Challis <git@zvecr.com>
Co-authored-by: Ryan <fauxpark@gmail.com>
* Initial commit on new clean branch. Testing out functionality of oled and encoder for default features.
* Cleaned up the initial push and removed the fancy keymap until the extra features and functionality can be tested and made more user friendly.
* Cleaned up the readme some more, compiled and tested both default and via keymaps, and did another round of checks to prepare for starting the PR.
* Cleaning up the keymap to meet expected formatting in a couple places and also adding in the TAP_CODE_DELAY after newly encoutnered encoder issues and inconsistencies.
* Apply suggestions from code review
Co-authored-by: Joel Challis <git@zvecr.com>
* Update keyboards/mechwild/mercutio/readme.md
Co-authored-by: Ryan <fauxpark@gmail.com>
* Fixing json syntax.
* Update keyboards/mechwild/mercutio/rules.mk
Co-authored-by: Ryan <fauxpark@gmail.com>
Co-authored-by: Joel Challis <git@zvecr.com>
Co-authored-by: Ryan <fauxpark@gmail.com>
* Quark PCB for Planck/Preonic
Quark provides alternate bottom row layouts for both the OLKB Planck and Preonic
* Rename rules.mk.txt to rules.mk
* added Tapping Toggle
removed tapping toggle from keymap level
* Update info.json
took out } as requested
* update config.h
added GPL2+ license and #pragma once
* update info.json again
cleaned up syntax
* Apply suggestions from code review
Co-authored-by: Drashna Jaelre <drashna@live.com>
* update config.h
added GPL2+ License
* Update info.json - and again
fixed it - oops
Co-authored-by: Drashna Jaelre <drashna@live.com>
* Make parameters from info.json available to the build system
* move all clueboard settings to info.json
* code formatting
* make flake8 happy
* make flake8 happy
* make qmk lint happy
* Add support for specifying led indicators in json
* move led indicators to the clueboard info.json
* Apply suggestions from code review
Co-authored-by: Erovia <Erovia@users.noreply.github.com>
* add missing docstring
Co-authored-by: Erovia <Erovia@users.noreply.github.com>
* Adding support for the 2 x 2u layout.
This adds a macro to support the 2 x 2u layout which facilitates
a cleaner looking layout configuration for the people using it.
* Update keyboards/kyria/kyria.h
Co-authored-by: Drashna Jaelre <drashna@live.com>
Co-authored-by: swampmonster <>
Co-authored-by: Drashna Jaelre <drashna@live.com>
* My first cut at firmware for te DMQDesign Spin
* Turn off underglow when computer sleeps
* dmqdesigns spin - a little more refined keymap now
* a few more refinements for spin
* missing key up event for CH_CPNL and CH_ASST
* better naming for keymap
* cformat
* Apply suggestions from code review
Co-authored-by: Drashna Jaelre <drashna@live.com>
* Old #include habits die hard... :)
Co-authored-by: Ryan <fauxpark@gmail.com>
Co-authored-by: Drashna Jaelre <drashna@live.com>
Co-authored-by: Ryan <fauxpark@gmail.com>
* added main keyboard files
* working default and iso maps
* add via config
* made default ansi map
* fixed info.json and made readme
* renamed folders
* reincluding the folders I renamed
* Apply suggestions from code review
Co-authored-by: Ryan <fauxpark@gmail.com>
* I made a change before PR to clean up VIA map that broke it now its fixed
* Apply suggestions from code review
Co-authored-by: James Young <18669334+noroadsleft@users.noreply.github.com>
* Update keyboards/boardsource/the_mark/the_mark.h
Co-authored-by: James Young <18669334+noroadsleft@users.noreply.github.com>
Co-authored-by: Ryan <fauxpark@gmail.com>
Co-authored-by: James Young <18669334+noroadsleft@users.noreply.github.com>
* Add default mode eighty firmware
* Add via keymap
* Mode80 firmware upgrades
- Removed SPI and PWM drivers from MCU configuration, HAL configuration and Chibi configuration as neither peripherals are being used
- Included second backspace key (row 5, col 14) which should solve the non-appearance of the backspace key on the hotswap PCB
* Add default mode eighty firmware
* Add via keymap
* Update keyboards/mode/eighty/config.h
Remove comment lines from config.h
Co-authored-by: Ryan <fauxpark@gmail.com>
* Update keyboards/mode/eighty/config.h
Remove comments from config.h
Co-authored-by: Ryan <fauxpark@gmail.com>
* Update eighty.c
Add GPLv2 header
* Update eighty.h
Add GPLv2 license header
* Update readme.md
Update README
* Update keyboards/mode/eighty/config.h
Remove keyboard description
Co-authored-by: Drashna Jaelre <drashna@live.com>
* Delete config.h
Delete config.h in keynap folder
* Update keyboards/mode/eighty/rules.mk
Remove feature disabling in rules.mk
Co-authored-by: Ryan <fauxpark@gmail.com>
* Move rules.mk to VIA folder
* Update keyboards/mode/eighty/keymaps/via/rules.mk
Use LTO_ENABLE as short for LINK_TIME_OPTIMIZATION_ENABLE
Co-authored-by: Drashna Jaelre <drashna@live.com>
* Update keyboards/mode/eighty/readme.md
Puts a single image embedded in the readme, and links to the full gallery
Co-authored-by: James Young <18669334+noroadsleft@users.noreply.github.com>
* Update keyboards/mode/eighty/readme.md
Use * for markdown list
Co-authored-by: Ryan <fauxpark@gmail.com>
* Apply suggestions from code review
Correct comment characters
Co-authored-by: Ryan <fauxpark@gmail.com>
* Adjusted copyright name, USB descriptor and removed info.json
* Separate Mode80 S and H firwares into subfolders
* Added info.json files for QMK Configurator
* Lowercase folder and filenames
* Remove config definition macros in M80H
* Remove config definition macros in M80S and root
* Change definitions to lowercase parameters
* Moce chconf and mcuconf chibiOS files to root folder
* Move halconf to root folder, keymaps to subfolders
* Update readme for building/flashing guide
Co-authored-by: Ryan <fauxpark@gmail.com>
* Add layers to VIA keymaps, remove CONSOLE_ENABLE
* Push master changes to lib/
* Retrieve lufa and googletest submodules to previous heads at master
* Disabled LTO in VIA keymaps
* Fix layout declaration to lowercase in m80s default keymap
* Added readme's for each M80S and M80H
Co-authored-by: Jaicob <jaicob@icloud.com>
Co-authored-by: Gondolindrim <alvaro.augusto.volpato@gmail.com>
Co-authored-by: Ryan <fauxpark@gmail.com>
Co-authored-by: Drashna Jaelre <drashna@live.com>
Co-authored-by: James Young <18669334+noroadsleft@users.noreply.github.com>
* Create Alter folder
* Revert "Create Alter folder"
This reverts commit 361103b821dbb22957b66cdedb0d11f996def71c.
* Add octopad folder
* Added a new keyboard, the Octopad
* Edited files based on requested changes
* Moved encoder code in keyboard level
* Updated the readme
* Corrected the rows and columns of encoders on config.h
* Changed the Vendor ID to D812 since the first one was already taken
* Added support for ast1109MLTRQ speakers
* Increased number of layers to 8 on VIA keymap
* Edited files based on comments
* Edited rules.mk as per comment
* Edited readme.md as per comment
* Rewrite APA102 support
The APA102 source was broken by commit 16a15c1cfc as it did not include the
quantum header. This commit addresses that, as well as other issues with
transferring bytes over the SPI interface, i.e. it was not setting the
clock pin back to low after sending a bit.
The deviation when sending the end frame is kept, but updated to the
latest from the referenced project.
Finally, these changes expose the global LED brightness parameter
of the APA102. Brightness values are configurable through
`APA102_DEFAULT_BRIGHTNESS` and `APA102_MAX_BRIGHTNESS`.
* Fix typo in led brightness extern
* Move driver out of AVR directory and add delay for ARM
* Experimental APA102 support on AVR and ARM
Co-authored-by: Alde Rojas <hello@alde.io>
* Refactor apa102_send_byte() calls to a loop
* Implement io_wait function for ARM
* Move APA102 drivers to own directory, fix copyright notice
* Add APA102 keymap to handwired/onekey
* Simplify RGBLIGHT_ENABLE/DRIVER option handling
Co-authored-by: Mikkel Jeppesen <2756925+Duckle29@users.noreply.github.com>
* Update vendor and product info
* Add rev2 for Choco60
* Add keymap for VIA
* Add readme.md for rev1 and rev2
* Use list instead of new line
* Remove DESCRIPTION
Co-authored-by: Ryan <fauxpark@gmail.com>
* Update rev1/readme.md to specify rev1 directly.
Co-authored-by: Ryan <fauxpark@gmail.com>
* Remove some definitions
Co-authored-by: Ryan <fauxpark@gmail.com>
* Remove comments
Co-authored-by: Ryan <fauxpark@gmail.com>
Co-authored-by: Ryan <fauxpark@gmail.com>
* fix abacus so it works with configurator
* create the keymap path if it doesn't exist
* bpiphany/unloved_bastard: remove the nested macros, move default keymap to json
* readd the unloved_bastard default keymap
* fix clueboard/card
* fixup handwired/2x5keypad
* fixup hub16
* matrix/noah: remove the broken matrix print code to fix compilation
* reinstate matrix_print with the right include
* Revert "create the keymap path if it doesn't exist"
This reverts commit af732776a539e8c6e2edf2e54f4d7f5ffa65b3a2.
* update keyboards/helix/rev2/keymaps/five_rows/rules.mk: oled selection, led animation selection
* add OLED_UPDATE_INTERVAL support into keyboards/helix/rev2/keymaps/five_rows/oled_display.c
Support for OLED_UPDATE_INTERVAL, even for older types of OLED tasks.
* Add 'HELIX=debug/no-debug' option into 'helix/rev2/keymaps/five_rows/rules.mk'
* Portico: Initial support for TKC Portico
* Portico: added GPL header to keymap files
* Update keyboards/tkc/portico/rules.mk
Co-authored-by: Ryan <fauxpark@gmail.com>
Co-authored-by: Ryan <fauxpark@gmail.com>
* add bastyl
* no need to copy the folder anymore
* clean up according to PR rules
* remove via, fix disposition
* add reset button on right half
* Update readme.md
* Update keyboards/hidtech/bastyl/bastyl.h
Co-authored-by: Joel Challis <git@zvecr.com>
* Update keyboards/hidtech/bastyl/rules.mk
Co-authored-by: Joel Challis <git@zvecr.com>
* Update keyboards/hidtech/bastyl/config.h
Co-authored-by: Joel Challis <git@zvecr.com>
* move json, remove via files
* Update keyboards/hidtech/bastyl/keymaps/default/keymap.c
Co-authored-by: Ryan <fauxpark@gmail.com>
* Update keyboards/hidtech/bastyl/keymaps/default/keymap.c
Co-authored-by: Ryan <fauxpark@gmail.com>
* Update keyboards/hidtech/bastyl/keymaps/default/keymap.c
Co-authored-by: Ryan <fauxpark@gmail.com>
* Update keyboards/hidtech/bastyl/keymaps/default/keymap.c
Co-authored-by: Ryan <fauxpark@gmail.com>
* add GPL to c and h files
* Update keyboards/hidtech/bastyl/info.json
Change order to match layout macro
Co-authored-by: Joel Challis <git@zvecr.com>
* Update keyboards/hidtech/bastyl/config.h
Co-authored-by: Drashna Jaelre <drashna@live.com>
* serial define can be ommited, is used by default
* Corrected VENDOR_ID
Incorrect VENDOR_ID has been updated to the correct one.
Co-authored-by: Quentin <qlebastard@gmail.com>
Co-authored-by: Joel Challis <git@zvecr.com>
Co-authored-by: Ryan <fauxpark@gmail.com>
Co-authored-by: Drashna Jaelre <drashna@live.com>
* Initial test version of Scarlet keyboard
* First commit of DElec Scarlet
* Change to new Draytronics branding
* Update to keyboard details
Update to keyboard details and link to Draytronics website.
* Update keyboards/draytronics/scarlet/scarlet.h
Co-authored-by: Joel Challis <git@zvecr.com>
* Update keyboards/draytronics/scarlet/rules.mk
Co-authored-by: Joel Challis <git@zvecr.com>
* Update keyboards/draytronics/scarlet/readme.md
Co-authored-by: Joel Challis <git@zvecr.com>
* Update keyboards/draytronics/scarlet/keymaps/default/keymap.c
Co-authored-by: Joel Challis <git@zvecr.com>
* Update keyboards/draytronics/scarlet/config.h
Co-authored-by: Joel Challis <git@zvecr.com>
* Update keymap.c
* Update config.h
* Update scarlet.h
* Update keyboards/draytronics/scarlet/config.h
Co-authored-by: James Young <18669334+noroadsleft@users.noreply.github.com>
* Update keyboards/draytronics/scarlet/config.h
Co-authored-by: James Young <18669334+noroadsleft@users.noreply.github.com>
* Update keyboards/draytronics/scarlet/scarlet.h
Co-authored-by: James Young <18669334+noroadsleft@users.noreply.github.com>
* Update keyboards/draytronics/scarlet/keymaps/default/keymap.c
Co-authored-by: James Young <18669334+noroadsleft@users.noreply.github.com>
* provide info.json layout to fix qmk configurator
* Correctly name keyboard in info.json
* Added website and layout key labels to info.json
* VIA support. Thanks sirdicholas
* Readme change, link to VIA design file.
Co-authored-by: Blake Drayson <blake@Euclid.ghost7.com>
Co-authored-by: Joel Challis <git@zvecr.com>
Co-authored-by: James Young <18669334+noroadsleft@users.noreply.github.com>
* [Keymap] fix and update helix/rev3_5rows:five_rows
* fix rgblight animation selection
* use `DEBUG_MATRIX_SCAN_RATE_ENABLE` insted of keyboard_post_init_user_scan.c
* Change the initial value of the ENCODER_ENABLE to 'no' in 'keymaps/five_rows/rules.mk'
* Add 'HELIX=debug/no-debug' option into 'rev3_5rows/keymaps/five_rows/rules.mk'
* Add '#define OLED_UPDATE_INTERVAL 100' 'rev3_5rows/keymaps/five_rows/config.h'
* add LED_ANIMATIONS_LEVEL macro into rev3_5rows/keymaps/five_rows/
* Change OLED_UPDATE_INTERVAL value in rev3_5rows/keymaps/five_rows/config.h
* YMD75 rev 3: fix BACKLIGHT_PIN
Update backlight LED pin used by QMK to control the per-key backlight for YMD75 rev 3
* YMD75 rev 3: fix BACKLIGHT_PIN - fix comments
* YMD75: move BACKLIGHT_PIN definitions to the respective versions
Signed-off-by: Nathan13888 <29968201+Nathan13888@users.noreply.github.com>
* Add VIA keymap for reviung41
* Change VID for compatibility
* Add GPL header to config.h
* Enable link time optimization
* Remove config since it might not be needed
* add the ability to exclude keyboards from travis builds
* add filtering to make all:
* only skip keyboards during make all:
* working implementation
* forego a CI_KEYBOARDS variable
* optimize the startup by only listing keyboards once
* add sort -u to all list_keyboard invocations
* move the if else if tree back to 1 level
* Add pos78 keyboard
* tidy up links
* Added missing commas
The missing commas were causing a compile error (Travis CI, #41934 failed).
* Added trailing commas
On lines 10-14, just missed last line (15).
* Travis CI errors
Trying to correct errors from Travis CI #41951 failed
* Corrected(?) TG(_FN) from Travis CI failure
* Revert readme.md to original format
Fauxpark
Co-authored-by: Ryan <fauxpark@gmail.com>
* Remove trailing \ from keymap.c
Fauxpark
Co-authored-by: Ryan <fauxpark@gmail.com>
* Change Vendor and Product ID
How do I update the Product ID search tool if 0x7878 is used/good?
* Add LAYOUT_ortho_6x13 Update keyboards/pos78/pos78.h
Co-authored-by: Drashna Jaelre <drashna@live.com>
* I bow to drashna's superior knowledge. Update keyboards/pos78/info.json
Co-authored-by: Drashna Jaelre <drashna@live.com>
* I bow to drashna's superior knowledge. Update keyboards/pos78/keymaps/default/keymap.c
Co-authored-by: Drashna Jaelre <drashna@live.com>
* I bow to drashna's superior knowledge. Update keyboards/pos78/keymaps/default/keymap.c
Co-authored-by: Drashna Jaelre <drashna@live.com>
* Added pic
* Add picture properly. Update keyboards/pos78/readme.md
Co-authored-by: Ryan <fauxpark@gmail.com>
* Remove Bootmagic_enable (fauxpark)
Co-authored-by: Ryan <fauxpark@gmail.com>
Co-authored-by: Ryan <fauxpark@gmail.com>
Co-authored-by: Drashna Jaelre <drashna@live.com>
* Initial BOX75 PCB v1.0.6 PCB support
* New prototype firmware
* Correct column pin assignment
* Update README
* Update keyboards/box75/config.h
Remove USB description
Co-authored-by: Drashna Jaelre <drashna@live.com>
* Update keyboards/box75/rules.mk
Remove comment lines from BLUETOOTH_ENABLE and AUDIO_ENABLE
Co-authored-by: Ryan <fauxpark@gmail.com>
* Add VIA support
* Remove KC_NO define and use traditional one
* Update keyboards/box75/keymaps/default/keymap.c
Move KC_HOME location on keymap.c
Co-authored-by: James Young <18669334+noroadsleft@users.noreply.github.com>
* Update keyboards/box75/box75.h
Move HOME key location on keymap.c
Co-authored-by: James Young <18669334+noroadsleft@users.noreply.github.com>
* Changed F13 to print screen in default VIA firmware
Co-authored-by: Gondolindrim <alvaro.augusto.volpato@gmail.com>
Co-authored-by: Drashna Jaelre <drashna@live.com>
Co-authored-by: Ryan <fauxpark@gmail.com>
Co-authored-by: James Young <18669334+noroadsleft@users.noreply.github.com>
* Initial CK60i support
* Initial Iron180 support
* Add PWM support
* Feedback from PCB protos
* Update README
* Remove CK60i references
* Remove KC_NO ____ definition and replaced with predefined
* Remove description field in USD descriptors
* Shorten bluetooth enable and audio output comments on rules.mk
* Initial VIA support
Co-authored-by: Gondolindrim <alvaro.augusto.volpato@gmail.com>
* Initial technika support
* Updated README
* Update keyboards/technika/config.h
Remove DESCRIPTION from usb desciptor fields
Co-authored-by: Drashna Jaelre <drashna@live.com>
* Update keyboards/technika/rules.mk
Remove words from comments in rules.mk
Co-authored-by: Ryan <fauxpark@gmail.com>
* Remove old KC_NO definitions and used default one
* Use defines for num, caps and scroll lock LED pins
* Fix underscore KC_NO substitution in keymap
Co-authored-by: Gondolindrim <alvaro.augusto.volpato@gmail.com>
Co-authored-by: Drashna Jaelre <drashna@live.com>
Co-authored-by: Ryan <fauxpark@gmail.com>
* added nemui layout
* via support working
* added license headers for c and h files
* Update keyboards/nemui/keymaps/via/rules.mk
Co-authored-by: Drashna Jaelre <drashna@live.com>
* Update keyboards/nemui/nemui.c
Co-authored-by: Drashna Jaelre <drashna@live.com>
* Update keyboards/nemui/config.h
Co-authored-by: Ryan <fauxpark@gmail.com>
* Update keyboards/nemui/readme.md
Co-authored-by: Ryan <fauxpark@gmail.com>
* Update keyboards/nemui/rules.mk
Co-authored-by: Ryan <fauxpark@gmail.com>
* removed nemui.json as it was supposed to only be in via repo
* Update keyboards/nemui/keymaps/default/keymap.c
Co-authored-by: Ryan <fauxpark@gmail.com>
* Update keyboards/nemui/info.json
Co-authored-by: James Young <18669334+noroadsleft@users.noreply.github.com>
* Update keyboards/nemui/info.json
Co-authored-by: James Young <18669334+noroadsleft@users.noreply.github.com>
* Update keyboards/nemui/keymaps/via/keymap.c
Co-authored-by: James Young <18669334+noroadsleft@users.noreply.github.com>
* Update keyboards/nemui/keymaps/via/keymap.c
Co-authored-by: James Young <18669334+noroadsleft@users.noreply.github.com>
* added split backspace support for the nemui
* need to also update the qmk keymap
* fixed info.json to have the new keys
* vusb changes shouldn't have happened
Co-authored-by: Drashna Jaelre <drashna@live.com>
Co-authored-by: Ryan <fauxpark@gmail.com>
Co-authored-by: James Young <18669334+noroadsleft@users.noreply.github.com>
* update keyboards/helix/rev2/local_features.mk - Improved parsing of the `HELIX =` option
* add 'is_mac_mode()' into keyboards/helix/rev2/rev2.c
* update helix/rev2/keymaps/default/keymap.c: use rgblight query functions
* Makes the OLED driver used by the helix:default keymap switchable.
* use TOP/drivers/oled/oled_driver.c
`make helix:default`
or
`make OLED_SELECT=core helix:default`
* use helix/local_drivers/ssd1306.c
`make OLED_SELECT=local helix:default`
* Separated the OLED related code from keymap.c and moved it to oled_display.c.
* Change the 'led_test' keymap to follow the changes in the 'default' keymap.
* update helix/rev2/keymaps/default/oled_display.c
* add '#define OLED_UPDATE_INTERVAL 50' into keyboards/helix/rev2/config.h
* Support for OLED_UPDATE_INTERVAL, even for older types of OLED tasks
* add readme.md for helix/rev2
* Apply drashna's suggestions to rev2.c.
* Apply drashna's suggestions to rev3_4rows.c, rev3_5rows.c.
Co-authored-by: mtei <2170248+mtei@users.noreply.github.com>
* Initial commit of Geekboards Macropad V2 keyboard
* Apply suggestions from code review
Co-authored-by: Joel Challis <git@zvecr.com>
* Apply suggestions from code review: delete unnecessary files
* Fixed typos
* Apply suggestions from code review
Co-authored-by: Ryan <fauxpark@gmail.com>
* Change RGB_MATRIX config syntax following recent core changes
* Apply suggestions from drashna code review
* Remove unnecessary file (it is now defined in the core)
* Remove unnecessary code, due to PR 11084 approve
Co-authored-by: Joel Challis <git@zvecr.com>
Co-authored-by: Ryan <fauxpark@gmail.com>
* [Keyboard] New Keyboard - BDE
Added the Big Dill Extended by MechWild
* Corrected pinout for righty config
Corrected the copied line from the lefty config that had not been updated prior to this commit.
* Corrected the files that had been overwritten with old versions during testing.
* Update keyboards/mechwild/bde/lefty/config.h
* Made changes based on suggestions. Added GPL and split preference config.h lines into keymap level.
* Apply suggestions from code review
Readme cleanup
* Update keyboards/mechwild/bde/lefty/keymaps/fancy/config.h
* Update keyboards/mechwild/bde/lefty/keymaps/via/config.h
* Apply suggestions from code review
Corrects a stray style line in one of the readme files as well as correcting the name of the keymap layout from the inaccurate 3x14 name to just "layout"
* add bastyl
* no need to copy the folder anymore
* clean up according to PR rules
* remove via, fix disposition
* add reset button on right half
* Update readme.md
* Update keyboards/hidtech/bastyl/bastyl.h
Co-authored-by: Joel Challis <git@zvecr.com>
* Update keyboards/hidtech/bastyl/rules.mk
Co-authored-by: Joel Challis <git@zvecr.com>
* Update keyboards/hidtech/bastyl/config.h
Co-authored-by: Joel Challis <git@zvecr.com>
* move json, remove via files
* Update keyboards/hidtech/bastyl/keymaps/default/keymap.c
Co-authored-by: Ryan <fauxpark@gmail.com>
* Update keyboards/hidtech/bastyl/keymaps/default/keymap.c
Co-authored-by: Ryan <fauxpark@gmail.com>
* Update keyboards/hidtech/bastyl/keymaps/default/keymap.c
Co-authored-by: Ryan <fauxpark@gmail.com>
* Update keyboards/hidtech/bastyl/keymaps/default/keymap.c
Co-authored-by: Ryan <fauxpark@gmail.com>
* add GPL to c and h files
* Update keyboards/hidtech/bastyl/info.json
Change order to match layout macro
Co-authored-by: Joel Challis <git@zvecr.com>
* Update keyboards/hidtech/bastyl/config.h
Co-authored-by: Drashna Jaelre <drashna@live.com>
* serial define can be ommited, is used by default
Co-authored-by: Joel Challis <git@zvecr.com>
Co-authored-by: Ryan <fauxpark@gmail.com>
Co-authored-by: Drashna Jaelre <drashna@live.com>
* Adding customMK Genesis keyboard and keymap files
* Updated readme.md
fixed a typo
* Fixed code for QMK PR
* Updated syntax in config.h and changed dfu to flash in readme
Co-authored-by: Ray <ray@custommk.com>
* Added a dactyl promicro with a slightly different 6x6 layout
* updated keyboard layout
* Removed description as per code review
* refactored as per code review
* removed redundant config.h file
* removed and updated a couple of lines in rules.mk
* replaced symlink with copy of file
* removed lines in readme
* Update readme.md
Co-authored-by: ralphie02 <ralph.azucena@carbon60.com>
* Split dmac_desc declaration and definition
According to the official documentation[1] gcc 10 is more strict about
correct extern usage.
I've had to move the definition of dmac_desc and dmac_desc_wb from
i2c_master.h to the corresponding .c file. This could be an issue if
anyone includes the i2c_master.h file without liking with the object
file.
[1]: https://gcc.gnu.org/gcc-10/porting_to.html
* Remove the keymap_config definition from keymaps
The keymap_config def was conflicting with the one found in
tmk_core/common/magic.c. Declaring it extern in magic.c breaks a bunch
of keyboard that rely on that declaration (like the ergodox). Instead
I've removed the one found in the keymap.c of the massdrop alt.
The same change will have to be made to other keyboards.
* Allow APM32 MCUs on certain CannonKeys PCBs
* another one
* Update DFU suffix args
* missed one
* Apply suggestions from code review
Co-authored-by: Joel Challis <git@zvecr.com>
Co-authored-by: Joel Challis <git@zvecr.com>
* Hotfix for #11106: Rework LAYOUT_alice support; add LAYOUT_alice_split_bs
Accidentally missed backwards compatibility on the sneakbox/aliceclone in #11106, which broke stanrc85's Community Layout keymap.
* sneakbox/aliceclone: move 2u Backspace to column 6
* add new keyboard scatter42 by bbrfkr
* mod info.json to work
* mod info.json
* mod readme
* Update keyboards/scatter42/keymaps/default/keymap.c
Co-authored-by: Ryan <fauxpark@gmail.com>
* Update keyboards/scatter42/keymaps/default/keymap.c
Co-authored-by: Ryan <fauxpark@gmail.com>
* Update keyboards/scatter42/scatter42.h
Co-authored-by: Ryan <fauxpark@gmail.com>
* Update keyboards/scatter42/config.h
Co-authored-by: Ryan <fauxpark@gmail.com>
Co-authored-by: Ryan <fauxpark@gmail.com>
* Disable almost all ChibiOS subsystems.
* Modify ChibiOS config updater script to fixup mcuconf include, use develop as base instead of master.
* Add default early-init bootloader to F042/F072.
* Back to 100k freq.
* Add LAYOUT_alice support: fallacy
* Add LAYOUT_alice support: kb_elmo/sesame
* Add LAYOUT_alice support: cheshire/curiosity
* Add LAYOUT_alice support: evyd13/wonderland
* Add LAYOUT_alice support: mechlovin/adelais
* Update LAYOUT_alice support: projectkb/alice
The PR that added Alice community layout support for the projectkb/alice/rev2 simultaneously broke support for every other keyboard that supported LAYOUT_alice.
This commit partially reverts the offending PR. `LAYOUT_alice` for the projectkb/alice has been renamed to `LAYOUT_alice_split_bs`, and a correct 65-key `LAYOUT_alice` has been added.
Additionally, the `LAYOUTS` rule has been moved to keyboard level as the layout macros are shared between rev1 and rev2 boards, which means the layout options are the same for both revisions.
* Update ramonimbao/aelith info.json
Keyboard source was already correct to support LAYOUT_alice, but the layout tree was missing from info.json.
* Fork `alice` Community Layout...
... into Standard and Split Backspace versions
Also updates stanrc85's layout keymap to use 65 keys instead of the Split Backspace 66-key version.
* Update LAYOUT_alice support: sneakbox/aliceclone
Rework the sneakbox/aliceclone to use the Split Backspace Alice layout.
* Update LAYOUT_alice support: zoo/wampus
The layout macro that was `LAYOUT_alice` was 66 keys. This layout macro has been renamed to `LAYOUT_alice_split_bs`, and a 65-key `LAYOUT_alice` has been added.
Additionally, the 66-key macro has been rearranged to accept its keycodes in the intended order for Community Layout support.
* Update keyboards for `LAYOUT_alice_split_bs` support
* LAYOUT_alice_split_bs support: ergosaurus
* LAYOUT_alice_split_bs support: handwired/colorlice
* LAYOUT_alice(_split_bs) support: handwired/owlet60
* LAYOUT_alice_split_bs support: nightly_boards/alter/rev1
* LAYOUT_alice(_split_bs) support: sck/osa
* LAYOUT_alice_split_bs support: tgr/alice
* LAYOUT_alice(_split_bs) support: tkc/osav2
* LAYOUT_alice_split_bs support: xelus/valor/rev1
* Add Via keymap
* Via Enable in Rules.mk
* Update config.h
added nasp before Plexus75 in PRODUCT to better follow Via naming convention
* Update keymap.c
changed KC_CTRL to KC_LCTL
* Update config.h
took out the manu repeat
* Update rules.mk
* Create rules.mk
changed location of rules.mk for supporting Via
* Apply suggestions from code review
Co-authored-by: Ryan <fauxpark@gmail.com>
* Update keyboards/plexus75/keymaps/via/rules.mk
Co-authored-by: Ryan <fauxpark@gmail.com>
* Apply suggestions from code review
Co-authored-by: Drashna Jaelre <drashna@live.com>
Co-authored-by: Ryan <fauxpark@gmail.com>
Co-authored-by: Drashna Jaelre <drashna@live.com>
- Set all other ChibiOS defaults to 'off', when not targeting Proton-C
- Modified all existing F303 boards to point at the QMK_PROTON_C to ensure repeatable binary output
- Modified version.h generation so that SKIP_VERSION=yes generates the same output
Co-authored-by: Joel Challis <git@zvecr.com>
Co-authored-by: Ryan <fauxpark@gmail.com>
Co-authored-by: James Young <18669334+noroadsleft@users.noreply.github.com>
Co-authored-by: Ryan <fauxpark@gmail.com>
Co-authored-by: James Young <18669334+noroadsleft@users.noreply.github.com>
Co-authored-by: Drashna Jaelre <drashna@live.com>
* Cozykeys Speedo Configurator fix
Outgoing codebase worked when compiled locally, but not from QMK Configurator because its API requires an exact directory structure.
* fix make commands in the readme
* Branch point for 2020 November 28 Breaking Change
* Remove matrix_col_t to allow MATRIX_ROWS > 32 (#10183)
* Add support for soft serial to ATmega32U2 (#10204)
* Change MIDI velocity implementation to allow direct control of velocity value (#9940)
* Add ability to build a subset of all keyboards based on platform.
* Actually use eeprom_driver_init().
* Make bootloader_jump weak for ChibiOS. (#10417)
* Joystick 16-bit support (#10439)
* Per-encoder resolutions (#10259)
* Share button state from mousekey to pointing_device (#10179)
* Add hotfix for chibios keyboards not wake (#10088)
* Add advanced/efficient RGB Matrix Indicators (#8564)
* Naming change.
* Support for STM32 GPIOF,G,H,I,J,K (#10206)
* Add milc as a dependency and remove the installed milc (#10563)
* ChibiOS upgrade: early init conversions (#10214)
* ChibiOS upgrade: configuration file migrator (#9952)
* Haptic and solenoid cleanup (#9700)
* XD75 cleanup (#10524)
* OLED display update interval support (#10388)
* Add definition based on currently-selected serial driver. (#10716)
* New feature: Retro Tapping per key (#10622)
* Allow for modification of output RGB values when using rgblight/rgb_matrix. (#10638)
* Add housekeeping task callbacks so that keyboards/keymaps are capable of executing code for each main loop iteration. (#10530)
* Rescale both ChibiOS and AVR backlighting.
* Reduce Helix keyboard build variation (#8669)
* Minor change to behavior allowing display updates to continue between task ticks (#10750)
* Some GPIO manipulations in matrix.c change to atomic. (#10491)
* qmk cformat (#10767)
* [Keyboard] Update the Speedo firmware for v3.0 (#10657)
* Maartenwut/Maarten namechange to evyd13/Evy (#10274)
* [quantum] combine repeated lines of code (#10837)
* Add step sequencer feature (#9703)
* aeboards/ext65 refactor (#10820)
* Refactor xelus/dawn60 for Rev2 later (#10584)
* add DEBUG_MATRIX_SCAN_RATE_ENABLE to common_features.mk (#10824)
* [Core] Added `add_oneshot_mods` & `del_oneshot_mods` (#10549)
* update chibios os usb for the otg driver (#8893)
* Remove HD44780 References, Part 4 (#10735)
* [Keyboard] Add Valor FRL TKL (+refactor) (#10512)
* Fix cursor position bug in oled_write_raw functions (#10800)
* Fixup version.h writing when using SKIP_VERSION=yes (#10972)
* Allow for certain code in the codebase assuming length of string. (#10974)
* Add AT90USB support for serial.c (#10706)
* Auto shift: support repeats and early registration (#9826)
* Rename ledmatrix.h to match .c file (#7949)
* Split RGB_MATRIX_ENABLE into _ENABLE and _DRIVER (#10231)
* Split LED_MATRIX_ENABLE into _ENABLE and _DRIVER (#10840)
* Merge point for 2020 Nov 28 Breaking Change
* CapsUnlocked CU65
* Remove spurious in 65_ansi keymap
* Fix key next to Enter in 65_iso
* Reviewed fixes for CU65
Config, layout, copyright, build rules and documentation tweaks
Co-authored-by: Joel Challis <git@zvecr.com>
* KC_NUBS not KC_NUSH on the bottom row
* K104 is 2U backspace
* Small info.json and config.h tweaks
Co-authored-by: Ryan <fauxpark@gmail.com>
Co-authored-by: Joel Challis <git@zvecr.com>
Co-authored-by: Ryan <fauxpark@gmail.com>
* Initial Styrka Commit
Initial commit of basic working firmware.
- has basic 6.25u spacebar and fullsize backspace support in default keymap
- has basic 6.25u spacebar and split backspace support in split_bs keymap
- beginning work for via keymap (not complete)
* Viktus Styrka Update 1
First edit update for Viktus Styrka
- Corrected LAYOUT macros
- Updated keymaps
- Updated info.json to match LAYOUT macros
- Added and updated VIA keymap
- Added and updated ALL keymap
- Removed unused features from config
- Added more detailed board info to main readme
* Update info.json
Update info.json - missing end }
* Update to files in initial commit
As requested, changes made to:
- styrka.c
- rules.mk
- split_bs/keymap.c
- all/keymap.c
- info.json
- config.h
* Update keyboards/viktus/styrka/rules.mk
Co-authored-by: Ryan <fauxpark@gmail.com>
Co-authored-by: Ryan <fauxpark@gmail.com>
* update keymap for unikorn
* add new map
* update keymap
* update keymap
* update map
* update the current keymap
* update keymap so it accounts for mouse keys as well
* add extra control and shift, for when we need to use the other keys
* get me square and curly braces
* remove unused macros
* update these changes so far
* update ilpse keymap
* rmove a layer and simplify my layers a bit
* I think there's a working keymap now for the corne. let's leave this here.
* I thought maybe that helped? but who knows
* save changes made so far
* update madhatter keymap to match what I want
* switch to use lcmd for main alt
* update my curiosity keymap
* make curiosity via enabled
* add via keymap
* Update keyboards/crkbd/keymaps/madhatter/keymap.c
Co-authored-by: Drashna Jaelre <drashna@live.com>
* Update keyboards/crkbd/keymaps/madhatter/keymap.c
Co-authored-by: Drashna Jaelre <drashna@live.com>
* Update keyboards/crkbd/keymaps/madhatter/keymap.c
Co-authored-by: Drashna Jaelre <drashna@live.com>
* Update keyboards/crkbd/keymaps/madhatter/keymap.c
Co-authored-by: Drashna Jaelre <drashna@live.com>
* Update keyboards/primekb/prime_e/keymaps/madhatter/keymap.c
Co-authored-by: Drashna Jaelre <drashna@live.com>
* Update keyboards/crkbd/keymaps/madhatter/keymap.c
Co-authored-by: Drashna Jaelre <drashna@live.com>
* stick to enum
* add bootmagic stuff and update keymap
* switch to bootmagic lite
* fix typo
* cleanup for writing to LED
* consistency
* fix led pins
* Update keyboards/crkbd/keymaps/madhatter/keymap.c
Co-authored-by: Ryan <fauxpark@gmail.com>
* Update keyboards/crkbd/keymaps/madhatter/keymap.c
Co-authored-by: Ryan <fauxpark@gmail.com>
* Update keyboards/crkbd/keymaps/madhatter/keymap.c
Co-authored-by: Ryan <fauxpark@gmail.com>
* Update keyboards/crkbd/keymaps/madhatter/keymap.c
Co-authored-by: Ryan <fauxpark@gmail.com>
* Update keyboards/crkbd/keymaps/madhatter/keymap.c
Co-authored-by: Ryan <fauxpark@gmail.com>
* Update keyboards/crkbd/keymaps/madhatter/keymap.c
Co-authored-by: Ryan <fauxpark@gmail.com>
* Update keyboards/crkbd/keymaps/madhatter/keymap.c
Co-authored-by: Ryan <fauxpark@gmail.com>
* Update keyboards/crkbd/keymaps/madhatter/keymap.c
Co-authored-by: Ryan <fauxpark@gmail.com>
* Update keyboards/crkbd/keymaps/madhatter/keymap.c
Co-authored-by: Ryan <fauxpark@gmail.com>
* Update keyboards/crkbd/keymaps/madhatter/keymap.c
Co-authored-by: Ryan <fauxpark@gmail.com>
* fix build issue
* Update keyboards/crkbd/keymaps/madhatter/keymap.c
Co-authored-by: Ryan <fauxpark@gmail.com>
* Update keyboards/crkbd/keymaps/madhatter/keymap.c
Co-authored-by: Ryan <fauxpark@gmail.com>
* Update keyboards/crkbd/keymaps/madhatter/keymap.c
Co-authored-by: Ryan <fauxpark@gmail.com>
* Update keyboards/crkbd/keymaps/madhatter/keymap.c
Co-authored-by: Ryan <fauxpark@gmail.com>
* Update keyboards/crkbd/keymaps/madhatter/keymap.c
Co-authored-by: Ryan <fauxpark@gmail.com>
* Update keyboards/crkbd/keymaps/madhatter/keymap.c
Co-authored-by: Ryan <fauxpark@gmail.com>
* Update keyboards/crkbd/keymaps/madhatter/keymap.c
Co-authored-by: Ryan <fauxpark@gmail.com>
* Update keyboards/crkbd/keymaps/madhatter/keymap.c
Co-authored-by: Ryan <fauxpark@gmail.com>
* Update keyboards/crkbd/keymaps/madhatter/keymap.c
Co-authored-by: Ryan <fauxpark@gmail.com>
Co-authored-by: Khader Syed <khader.syed@aicure.com>
Co-authored-by: Drashna Jaelre <drashna@live.com>
Co-authored-by: Ryan <fauxpark@gmail.com>
* Fixed VIA keymap build warning on gcc 10.2.0, Fixed misleading LED function names, Fixed formatting
* Fix: Allow layer LED indicators to be overriden on the keymap level
* Implemented suggested change from led_set_kb callback to led_update_kb callback
* Apply suggestions from code review
Co-authored-by: Ryan <fauxpark@gmail.com>
* Update keyboards/idb/idb_60/idb_60.c
Co-authored-by: Drashna Jaelre <drashna@live.com>
Co-authored-by: Ryan <fauxpark@gmail.com>
Co-authored-by: Drashna Jaelre <drashna@live.com>
* Copied B65 and updated matrix
* Updated Caps LED Pin
* Updated most of the FW
* Updated errant names from Bolsa65 copy
* Keymap updates
* Moved to config.h LED indicators. Tested on PCB for functionality
* Add a new keyboard: yoichiro/lunakey_mini
* Modify the VENDOR and PRODUCT IDs.
* Remove unnecessary EOL characters.
* Remove unnecessary modified characters.
* Update the layer definition more simple.
* Change the product name.
* Change the LAYOUT name (append `_split_3x6_4`) and change keys order in info.json file.
* Configure new keyboard zoo/wampus
* Apply suggestions from code review
Update LED pins to defined defaults
Co-authored-by: Joel Challis <git@zvecr.com>
* Apply suggestions from code review
- Remove unused layers from default.
- Remove chibios patch comment
Co-authored-by: Ryan <fauxpark@gmail.com>
Co-authored-by: Joel Challis <git@zvecr.com>
Co-authored-by: Ryan <fauxpark@gmail.com>
Pulled some functionality from the endgame keymap for the Drop Ctrl.
* very shortened version of the Endgame keymap
* fixed pictures
* fixed link
* fixed link
* fix files
* add GREEN RGB
* fixed GREEN RGB
* not supposed to be in my fork...
* wasn't supposed to be in my fork.
* I have fixed the layer 0 RGB Settings; you can now apply layer using "COLOR" in the layout template.
* I've renamed to pregame, fixed several files
* added Underglow RGB layout, changed def
ault RGB color
* fixed the color of the default profile like i want it
* Added IRL Photo
* Update keymap.c
disabled debugging.
* Update keymap.c
* Update config.h
* Update README.md
* Update keymap.h
* Changed some settings on rules for clean up.
* Changed some settings on rules for clean up.
* fixed some errors, cleaned things up
* Update README.md
* Update README.md
* Update README.md
* Update README.md
* Update README.md
* Update README.md
* Update README.md
* Fixed changes recommended by Fauxpark
* Added changes recommended by fauxpark
* trying to fix my repo
* Still trying to fix merge issues
* changed to lowercase
* Delete reading.md
* Trying to rebase my repo
* stuck in rebase loop trying to fix local files and update
* updating readme file
This is based on feedback talking with crop_octagon about the device. Future trackballs will ship with ATMEL DFU for simplicity. This also includes some fixes and optimizations based on code review and tinkering on my own devices.
* Update the melody96/zunger layout to make typing Romance languages easier.
Move the combining accents to fn + (keys used by Mac OS for that purpose),
and move the fn key to be the one adjacent to the space bar, since one needs
to type combinations of that a lot more than one needs to type Greek letters
in normal use. (As determined by experiment)
Also clean up the comments.
Co-authored-by: Yonatan Zunger <zunger@desiderata.lan>
* update readme with relevant PCB versioning
* Add VIA keymap to e6v2 LE BMC
* add via keymap
* Update keyboards/exclusive/e6v2/le_bmc/keymaps/via/keymap.c
Co-authored-by: Joel Challis <git@zvecr.com>
* Update keyboards/exclusive/e6v2/oe_bmc/keymaps/via/keymap.c
Co-authored-by: Joel Challis <git@zvecr.com>
Co-authored-by: Joel Challis <git@zvecr.com>
Improvements and bug fixes for the keymaps kodi and default for
ANAVI Macro Pad 8:
- Add space to the end of string "Active layer: " for better
visibility on the mini I2C OLED display for both keymaps
- Replace "Main" with "Kodi" for the Kodi keymap
- Add comment with reference to Kodi documentation for the
available shortcuts in this keymap
Signed-off-by: Leon Anavi <leon@anavi.org>
* Added Via Support and Keymap
Via Specific Keymap for BM16s along with correction of the Vendor and Product ID.
* Made adjustments for PR 10863
Made adjustments based on feedback from Pull request 10853 for qmk master pull request
* Additional update for PR 10853
Same description as previous commit.
* Update .vscode/settings.json
Updating based on commit suggestion.
Co-authored-by: Ryan <fauxpark@gmail.com>
Co-authored-by: Ryan <fauxpark@gmail.com>
* Refactor the crkbd/via keymap and fix OLED bugs
* Revert "Refactor the crkbd/via keymap and fix OLED bugs"
This reverts commit dc9db029fc6b077fc7600b49e920b755c522d100.
* Fix OLED display bugs
* Remove unused functions
* Remove uncessary the key logger
* Add new lines at end of file
* Remove unnecesary extern for is_master
* Remove extern is_master from rev1.h
* Remove ssd1306 from common dir because its the legacy lib
* Update default keymap based the via keymap
* Remove foostan keymap because it will be legacy
* Revert Remove unnecesary extern for is_master
* Remove unnecessary backslashes.
* Makes the OLED driver used by the helix:five_rows keymap switchable.
* use TOP/drivers/oled/oled_driver.c
`make HELIX=stdole helix:five_rows`
* use helix/local_drivers/ssd1306.c
`make HELIX=oled helix:five_rows`
* Separated the OLED related code from keymap.c and moved it to oled_display.c.
* scan rate without OLED
* make HELIX=verbose,dispoff,scan helix/rev2:five_rows
use Helix original code
text data bss dec hex filename
18880 58 235 19173 4ae5 .build/helix_rev2_five_rows.elf
matrix scan frequency: 1590
* make HELIX=verbose,dispoff,scan,sc helix/rev2:five_rows
use split_common code
text data bss dec hex filename
18554 40 231 18825 4989 .build/helix_rev2_five_rows.elf
matrix scan frequency: 1202
* scan rate with helix/local_drivers/ssd1306.c
* make HELIX=verbose,dispoff,scan,oled helix/rev2:five_rows
use Helix original code
text data bss dec hex filename
24048 196 342 24586 600a .build/helix_rev2_five_rows.elf
matrix scan frequency: 739
* make HELIX=verbose,dispoff,scan,sc,oled helix/rev2:five_rows
use split_common code
text data bss dec hex filename
23750 176 338 24264 5ec8 .build/helix_rev2_five_rows.elf
matrix scan frequency: 642
* scan rate with drivers/oled/oled_driver.c
* make HELIX=verbose,dispoff,scan,stdole helix/rev2:five_rows
use Helix original code
text data bss dec hex filename
24590 210 798 25598 63fe .build/helix_rev2_five_rows.elf
matrix scan frequency: 293
* make HELIX=verbose,dispoff,scan,sc,stdole helix/rev2:five_rows
use split_common code
text data bss dec hex filename
24290 190 794 25274 62ba .build/helix_rev2_five_rows.elf
matrix scan frequency: 277
* clean up helix/rev2/keymaps/five_rows/keymap.c
* update five_rows/oled_display.c
* update helix/rev2/keymaps/five_rows/keymap.c: remove LAYOUT_kc()
* Ported the keymap from helix/rev2:five_rows to helix/rev3_5rows:five_rows.
* update five_rows/oled_display.c
* add License comment
I noticed that my KC_PPLS and KC_PENT keys weren't actually doing
anything. By looking at the ortho_6x4 layout, I guessed that maybe the
pins were incorrect and guessed the proper ones. Now, my numpad is fully
functional.
* added to handwired pill60
* Update keyboards/handwired/pill60/config.h and all other PR suggested changes
Deleted DESCRIPTION
Co-authored-by: Drashna Jaelre <drashna@live.com>
Update keyboards/handwired/pill60/readme.md
Smaller image in readme
Co-authored-by: Drashna Jaelre <drashna@live.com>
Update keyboards/handwired/pill60/info.json
Deleted key_count
Co-authored-by: Ryan <fauxpark@gmail.com>
Update keyboards/handwired/pill60/keymaps/default/keymap.c
Deleted backslash on keymap.c
Co-authored-by: Ryan <fauxpark@gmail.com>
Update keyboards/handwired/pill60/pill60.h
Deleted led.h
Co-authored-by: Ryan <fauxpark@gmail.com>
Update keyboards/handwired/pill60/blackpill_f401/rules.mk
Update stm32f401 rules.mk
Co-authored-by: Ryan <fauxpark@gmail.com>
Update keyboards/handwired/pill60/blackpill_f411/rules.mk
Update stm32f411 rules.mk
Co-authored-by: Ryan <fauxpark@gmail.com>
Update keyboards/handwired/pill60/bluepill/rules.mk
Update bluepill rules.mk
Co-authored-by: Ryan <fauxpark@gmail.com>
Update keyboards/handwired/pill60/rules.mk
Added comment on rules.mk to help ]
Co-authored-by: Ryan <fauxpark@gmail.com>
deleted bootloader_defs.h
added GPL2 + compatible license header
updated keymap readme
updated those that don't need common_config.h and deleted some unnecessary spaces in f411/rules.mk
updated default folder in rules.mk
* fix and simplify build files according to onekey example
* Added GPL2+ Compatible license header
* Updated information on info.json and hopefully de-cluttered branch
* Updated default encoder settings
* Updated info.json for after to be in the proper order
* Fixed maintainer name
* added Keyboard Southpaw66
* Housekeeping, shorten urls
* Housekeeping
* Row matrix pins were flipped, fixed
* housekeeping, extraneous punctuation
* bug-fixing
* bug-fixing
* Layout macro fixed
* Layout macro fixed again
* Update and rename Southpaw66,c to southpaw66.c
* Rename Southpaw66.h to southpaw66.h
* Update config.h
* Update info.json
* Change Southpaw66 to southpaw66
made change to case in all instances in code except where critical, such as in url's.
* Rename parent folder from Southpaw66 to southpaw66
* Rename parent folder from Southpaw66 to southpaw66
* Update info.json
* Update keyboards/rpiguy9907/Southpaw66/readme.md
updated image url to point to lower resolution image.
* Update config.h
re-capitalized Southpaw66 in product name.
* Rename Southpaw66 parent folder to southpaw66
* Rename parent folder from Southpaw66 to southpaw66
* rename parent folder from Southpaw66 to southpaw66
* rename parent folder from Southpaw66 to southpaw66
* Rename parent folder from Southpaw66 to southpaw66
* rename parent folder from Southpaw66 to southpaw66
* rename parent folder from Southpaw66 to southpaw66
* Update keyboards/rpiguy9907/southpaw66/readme.md
* Update keyboards/rpiguy9907/southpaw66/config.h
By default the `i2c_master` driver for ChibiOS uses the B6 pin for
`I2C1_SCL` and the B7 pin for `I2C1_SDA`. However, the ChibiOS board
file used for the F401 Blackpill board (`ST_STM32F401C_DISCOVERY`)
configures B6 as `I2C1_SCL` and B9 as `I2C1_SDA`, and if that
configuration is left unchanged, enabling the `i2c_master` driver
results in having two pins (B7 and B9) configured as `I2C1_SDA` at the
same time, which does not work properly (experimental results show that
the B9 pin still works as `I2C1_SDA` in that case, and the B7 pin does
not work).
Configure the B9 pin as an input with pull-up in `board_init()`, so that
the B7 pin can be configured as `I2C1_SDA` by the I2C driver.
* Add new keyboard Pan
Encoder switches still need work
* New keyboard Pan
Should be complete
* Split MCU selection into 2 revision folders
* [rgbkb/pan] Make requested changes for PR
Additionally, set DEFAULT_FOLDER to rev1, and default rev1
to atmega32a (as all shipped kits include an atmega32a)
* Apply suggestions from code review
* Fix default keymap typo
* add usb max power define
* Commit suggested changes
* Update keyboards/rgbkb/pan/config.h
* Apply suggestions from code review
Small copyright updates
* Apply suggestions from code review
* Personal keymap
- fix quoting in description
fix issue with userspace disabling audio
wip
Update keyboards/kingly_keys/little_foot/keymaps/yanfali/rules.mk
Co-authored-by: Ryan <fauxpark@gmail.com>
* Update keyboards/kingly_keys/little_foot/config.h
Co-authored-by: Nick Brassel <nick@tzarc.org>
Co-authored-by: Yan-Fa Li <yanfa.li@fireeye.com>
Co-authored-by: Ryan <fauxpark@gmail.com>
Co-authored-by: Nick Brassel <nick@tzarc.org>
* Update massdrop/alt keyboard to fix Caps Lock LED flickering.
* Fix Caps-lock LED during underglow-only for massdrop/ctrl
* Update keyboards/massdrop/ctrl/keymaps/default/keymap.c
* feat: new keymapping for idobo
* fix: added licenses. converted int to uint8_t where applicable
* fix: addressed zvecr stylistic enhancements
* fix: replaced rgblight_sethsv with rgblight_sethsv_noeeprom
* First pass
* Add config options to docs
* Update some wording
* Slight tidy up of backlight caps logic
* Init pin to correct state
* Move init location
* Reverse default state
Specifically, the lgreen variable isn't used, and avr-gcc 8.x complains about this. To prevent it from being an issue, just set all of these led variables to be unused.
* add big spacebar default
* add rev1 big space
* add big spacebar default
* add rev1 big space
* Fixed copyright statements
Removed unused RGBRST keycode and bootmagic swaps
* Minor Tweak
* Refactor spacebar defines.
* Add TMO50 layout
* Rename Atreus keymap.
* Refactor Atreus for readability.
* Eliminate tapdance quote and tweak maltroff.
* Factor out tapdance.
* Add some fancy combos and keys.
* Remove combos for now because they cause pain.
* WIP visualizer
* Alternate method for reset
* WIP2 visualizer
* Layer text tweak.
* Add made-up layout Nortron as a combination of Norman and Maltron.
* Add backspace.
* Add Talljoe keymap to Prime E.
* Fix double-colon so it doesn't press enter if shift is released early.
* Use new make command.
* Bring some modern standards into code and add licenses.
* Remove QMK_KEYBOARD_CONFIG_H and fixup QMK_KEYBOARD_H.
* Move from `biton32` to `get_highest_layer`.
* Remove PREVENT_STUCK_MODIFIERS
* Update keyboards/thevankeyboards/minivan/keymaps/talljoe-minivan/config.h
Add Eco keymap, factor Crkbd keymap to community layout, other minor tweaks
* Remove outdated Crkbd Ctrl key positioning info
* Add Left Alt key to Lily58 keymap
* Lily58 no longer overrides default TAPPING_TERM
* Refactor Crkbd keymap to use new community layout
* Fix underglow animations for Crkbd w/ Split Common
* Add initial Eco keymap
* Update outdated reference to Crkbd layout
* Add keymap links to userspace readme
* Add copyright notices to files changed in this PR
* add dp60 indicator mode
* update according to #7720
* added license header and move the ws2812 codes to a seperate c file
* fixed conflict with master
* nullbitsco/nibble: rework LAYOUT_all
... and update via keymap accordingly.
* compress info.json LAYOUT_all tree
Only changes the white space.
* rebuild info.json LAYOUT_all tree
Note: this commit makes the visual layout the ANSI layout with a split left Shift, instead of being the same as the ISO layout.
* unify code styles
Make logically-unchanged code blocks similar in appearance to logically-changed blocks.
* correct LAYOUT_iso key sequence
Move ISO Enter's object to its proper place.
* exent VIA support
* minor cleanups
* Update keyboards/exent/config.h
Co-authored-by: Ryan <fauxpark@gmail.com>
* Update keyboards/exent/config.h
Co-authored-by: Ryan <fauxpark@gmail.com>
Co-authored-by: Ryan <fauxpark@gmail.com>
* Added ad/freebird60.
* Moved freebird60 keyboard. Added VIA keymap.
* Updated `keebsforall/freebird60` README to include image.
* Update keyboards/keebsforall/freebird60/readme.md
Co-authored-by: Ryan <fauxpark@gmail.com>
* Update keyboards/keebsforall/freebird60/readme.md
Co-authored-by: Ryan <fauxpark@gmail.com>
Co-authored-by: Ryan <fauxpark@gmail.com>
* Adding Evan Travers' Keyboardio Atreus branch.
Initial commit of my KeyboardIO Atreus layout.
This is a direct copy of my default Atreus layout, with blank spaces
for the two additional keys.
* Added MACLOCK macro to keymap.c
* Updates to Keyboardio Atreus keymap and readme.
* Adding arrows to bottom row of RAISE and LOWER layers
* bringing the rest of the master branch to my working branch.
* Changes to my KeyboardIO Atreus keymap & readme
* Changes to keymap.
* Adding Evan Travers' Keyboardio Atreus branch.
Initial commit of my KeyboardIO Atreus layout.
This is a direct copy of my default Atreus layout, with blank spaces
for the two additional keys.
* Added MACLOCK macro to keymap.c
* Updates to Keyboardio Atreus keymap and readme.
* Adding arrows to bottom row of RAISE and LOWER layers
* bringing the rest of the master branch to my working branch.
* Changes to my KeyboardIO Atreus keymap & readme
* Changes to keymap.
* Added GPL2+ compatible license header.
Co-authored-by: Ian Sterling <503326@MC02YT9K9LVCF.tld>
* Firmware initial commit, still has a few bugs - mainly rotary encoders do not work and needs cleaning up
* Fixed the volume control issue and limited the RGB brightness (can be really bright), added the ability to switch LED mode with left encoder click, and added via support (untested)
* Remove define that should go in config.h
* Removed define that should be in config.h
* Removed LTO_ENABLE as suggested - has issues on ARM
Co-authored-by: Drashna Jaelre <drashna@live.com>
* Added the correct define for OLED screen size
* Applied suggested change to remove description
Co-authored-by: Ryan <fauxpark@gmail.com>
* Made suggested change to remove backslashes
Co-authored-by: Ryan <fauxpark@gmail.com>
* Suggested change made to rgblight
Co-authored-by: Ryan <fauxpark@gmail.com>
* Suggested change made to rgblight
Co-authored-by: Ryan <fauxpark@gmail.com>
* Suggested change made to remove backslashes
Co-authored-by: Ryan <fauxpark@gmail.com>
* Suggested change made to rgblight
Co-authored-by: Ryan <fauxpark@gmail.com>
* Update keyboards/rocketboard_16/rocketboard_16.c
Co-authored-by: Ryan <fauxpark@gmail.com>
* Added suggested comments
Co-authored-by: Ryan <fauxpark@gmail.com>
* Made suggested changes to rules file
Co-authored-by: Ryan <fauxpark@gmail.com>
* Added suggested change to rgblight
Co-authored-by: Ryan <fauxpark@gmail.com>
* Added info.json for QMK configurator
* Update readme.md
* This change makes the firmware work... through magic... seriously, no idea - but it works!
* Updated dimming step, OLED functionality, and rules for formatting
- Changed the dimming step size for smoother dimming with the reduced range
- Added lots of OLED functionality - QMK logo and title at top, num/caps/scroll lock status, and backlight brightness level
- Updated the rules.mk file to comply more closely with the formatting guidelines
* Fixed tab issues
Co-authored-by: Ryan <fauxpark@gmail.com>
* Updated to use bootmagic lite with the key that usually turns rgb on/off
Co-authored-by: Drashna Jaelre <drashna@live.com>
Co-authored-by: Ryan <fauxpark@gmail.com>
* Add Z70Ultra which is a Hotsawp RGB 65% keyboard
* Update keyboards/melgeek/z70ultra/z70ultra.h
Co-authored-by: Ryan <fauxpark@gmail.com>
* Update keyboards/melgeek/z70ultra/keymaps/default/keymap.c
Co-authored-by: Ryan <fauxpark@gmail.com>
* Update keyboards/melgeek/z70ultra/keymaps/via/keymap.c
Co-authored-by: Ryan <fauxpark@gmail.com>
* Update keyboards/melgeek/z70ultra/z70ultra.c
Co-authored-by: Ryan <fauxpark@gmail.com>
* Update keyboards/melgeek/z70ultra/readme.md
Co-authored-by: Ryan <fauxpark@gmail.com>
* Update keyboards/melgeek/z70ultra/rev1/rules.mk
Co-authored-by: Ryan <fauxpark@gmail.com>
* Update keyboards/melgeek/z70ultra/z70ultra.c
Co-authored-by: Ryan <fauxpark@gmail.com>
* Update keyboards/melgeek/z70ultra/z70ultra.c
Co-authored-by: Ryan <fauxpark@gmail.com>
* Update keyboards/melgeek/z70ultra/z70ultra.c
Co-authored-by: Ryan <fauxpark@gmail.com>
* Update keyboards/melgeek/z70ultra/z70ultra.h
Co-authored-by: Ryan <fauxpark@gmail.com>
* Update readme.md
* Update info.json
update the name of layout to consistent the keyboard.
* Update keyboards/melgeek/z70ultra/z70ultra.c
Co-authored-by: Ryan <fauxpark@gmail.com>
* Update keyboards/melgeek/z70ultra/z70ultra.c
Co-authored-by: Ryan <fauxpark@gmail.com>
* Update keyboards/melgeek/z70ultra/info.json
Co-authored-by: Ryan <fauxpark@gmail.com>
* Update keyboards/melgeek/z70ultra/keymaps/default/keymap.c
Co-authored-by: Ryan <fauxpark@gmail.com>
* Update keyboards/melgeek/z70ultra/keymaps/via/keymap.c
Co-authored-by: Ryan <fauxpark@gmail.com>
* Add Z70Ultra
* Support Z70Ultra
[Modified] info.json to support two different layouts
[Add] rules.mk to support default folder
* Update keyboards/melgeek/z70ultra/rev1/rules.mk
Co-authored-by: Ryan <fauxpark@gmail.com>
* Update keyboards/melgeek/z70ultra/config.h
Co-authored-by: Ryan <fauxpark@gmail.com>
* remove excessive arguments from LAYOUT_split_space
* Update keyboards/melgeek/z70ultra/info.json
Co-authored-by: James Young <18669334+noroadsleft@users.noreply.github.com>
* Update keyboards/melgeek/z70ultra/info.json
Co-authored-by: James Young <18669334+noroadsleft@users.noreply.github.com>
* Update keyboards/melgeek/z70ultra/keymaps/default/keymap.c
Co-authored-by: James Young <18669334+noroadsleft@users.noreply.github.com>
* Update keyboards/melgeek/z70ultra/z70ultra.h
Co-authored-by: James Young <18669334+noroadsleft@users.noreply.github.com>
* Update keyboards/melgeek/z70ultra/z70ultra.h
Co-authored-by: James Young <18669334+noroadsleft@users.noreply.github.com>
* Update keyboards/melgeek/z70ultra/keymaps/via/keymap.c
Co-authored-by: James Young <18669334+noroadsleft@users.noreply.github.com>
* Update keyboards/melgeek/z70ultra/keymaps/default/keymap.c
Co-authored-by: James Young <18669334+noroadsleft@users.noreply.github.com>
* Update keyboards/melgeek/z70ultra/rev1/rules.mk
Co-authored-by: James Young <18669334+noroadsleft@users.noreply.github.com>
* Update keyboards/melgeek/z70ultra/keymaps/via/keymap.c
Co-authored-by: James Young <18669334+noroadsleft@users.noreply.github.com>
* Update keyboards/melgeek/z70ultra/keymaps/default/keymap.c
Co-authored-by: James Young <18669334+noroadsleft@users.noreply.github.com>
* Update keyboards/melgeek/z70ultra/keymaps/via/keymap.c
Co-authored-by: James Young <18669334+noroadsleft@users.noreply.github.com>
* Update keyboards/melgeek/z70ultra/keymaps/via/keymap.c
Co-authored-by: James Young <18669334+noroadsleft@users.noreply.github.com>
* Use macro replace with the literal for CS & SW
* Update keyboards/melgeek/z70ultra/z70ultra.c
Co-authored-by: Drashna Jaelre <drashna@live.com>
* [Keyboard] Support MJ61 which is a 60% ANSI STD Hotswap RGB keyboard
* Update keyboards/melgeek/mj61/mj61.c
Co-authored-by: Drashna Jaelre <drashna@live.com>
* Update keyboards/melgeek/mj61/mj61.c
Co-authored-by: Drashna Jaelre <drashna@live.com>
* [Keyboard] MJ61 Add license header for files and the link for readme
* Update keyboards/melgeek/mj61/readme.md
Co-authored-by: Ryan <fauxpark@gmail.com>
* Update keyboards/melgeek/mj61/rev1/config.h
Co-authored-by: Ryan <fauxpark@gmail.com>
* Update keyboards/melgeek/mj61/rev1/rules.mk
Co-authored-by: Ryan <fauxpark@gmail.com>
* Update keyboards/melgeek/mj61/mj61.c
Co-authored-by: Ryan <fauxpark@gmail.com>
* Update keyboards/melgeek/mj61/mj61.c
Co-authored-by: Ryan <fauxpark@gmail.com>
* Add GPL for files
* Update keymaps/default/keymap.c
* Update keymaps/via/keymap.c
* Update keyboards/melgeek/z70ultra/z70ultra.c
Co-authored-by: Drashna Jaelre <drashna@live.com>
* Update keyboards/melgeek/z70ultra/z70ultra.c
Co-authored-by: Drashna Jaelre <drashna@live.com>
* [Fixed] remove this code cause it's useless.
Co-authored-by: Ryan <fauxpark@gmail.com>
Co-authored-by: James Young <18669334+noroadsleft@users.noreply.github.com>
Co-authored-by: Drashna Jaelre <drashna@live.com>
