* Add pos78 keyboard
* tidy up links
* Added missing commas
The missing commas were causing a compile error (Travis CI, #41934 failed).
* Added trailing commas
On lines 10-14, just missed last line (15).
* Travis CI errors
Trying to correct errors from Travis CI #41951 failed
* Corrected(?) TG(_FN) from Travis CI failure
* Revert readme.md to original format
Fauxpark
Co-authored-by: Ryan <fauxpark@gmail.com>
* Remove trailing \ from keymap.c
Fauxpark
Co-authored-by: Ryan <fauxpark@gmail.com>
* Change Vendor and Product ID
How do I update the Product ID search tool if 0x7878 is used/good?
* Add LAYOUT_ortho_6x13 Update keyboards/pos78/pos78.h
Co-authored-by: Drashna Jaelre <drashna@live.com>
* I bow to drashna's superior knowledge. Update keyboards/pos78/info.json
Co-authored-by: Drashna Jaelre <drashna@live.com>
* I bow to drashna's superior knowledge. Update keyboards/pos78/keymaps/default/keymap.c
Co-authored-by: Drashna Jaelre <drashna@live.com>
* I bow to drashna's superior knowledge. Update keyboards/pos78/keymaps/default/keymap.c
Co-authored-by: Drashna Jaelre <drashna@live.com>
* Added pic
* Add picture properly. Update keyboards/pos78/readme.md
Co-authored-by: Ryan <fauxpark@gmail.com>
* Remove Bootmagic_enable (fauxpark)
Co-authored-by: Ryan <fauxpark@gmail.com>
Co-authored-by: Ryan <fauxpark@gmail.com>
Co-authored-by: Drashna Jaelre <drashna@live.com>
* Initial BOX75 PCB v1.0.6 PCB support
* New prototype firmware
* Correct column pin assignment
* Update README
* Update keyboards/box75/config.h
Remove USB description
Co-authored-by: Drashna Jaelre <drashna@live.com>
* Update keyboards/box75/rules.mk
Remove comment lines from BLUETOOTH_ENABLE and AUDIO_ENABLE
Co-authored-by: Ryan <fauxpark@gmail.com>
* Add VIA support
* Remove KC_NO define and use traditional one
* Update keyboards/box75/keymaps/default/keymap.c
Move KC_HOME location on keymap.c
Co-authored-by: James Young <18669334+noroadsleft@users.noreply.github.com>
* Update keyboards/box75/box75.h
Move HOME key location on keymap.c
Co-authored-by: James Young <18669334+noroadsleft@users.noreply.github.com>
* Changed F13 to print screen in default VIA firmware
Co-authored-by: Gondolindrim <alvaro.augusto.volpato@gmail.com>
Co-authored-by: Drashna Jaelre <drashna@live.com>
Co-authored-by: Ryan <fauxpark@gmail.com>
Co-authored-by: James Young <18669334+noroadsleft@users.noreply.github.com>
* Initial CK60i support
* Initial Iron180 support
* Add PWM support
* Feedback from PCB protos
* Update README
* Remove CK60i references
* Remove KC_NO ____ definition and replaced with predefined
* Remove description field in USD descriptors
* Shorten bluetooth enable and audio output comments on rules.mk
* Initial VIA support
Co-authored-by: Gondolindrim <alvaro.augusto.volpato@gmail.com>
* Initial technika support
* Updated README
* Update keyboards/technika/config.h
Remove DESCRIPTION from usb desciptor fields
Co-authored-by: Drashna Jaelre <drashna@live.com>
* Update keyboards/technika/rules.mk
Remove words from comments in rules.mk
Co-authored-by: Ryan <fauxpark@gmail.com>
* Remove old KC_NO definitions and used default one
* Use defines for num, caps and scroll lock LED pins
* Fix underscore KC_NO substitution in keymap
Co-authored-by: Gondolindrim <alvaro.augusto.volpato@gmail.com>
Co-authored-by: Drashna Jaelre <drashna@live.com>
Co-authored-by: Ryan <fauxpark@gmail.com>
* added nemui layout
* via support working
* added license headers for c and h files
* Update keyboards/nemui/keymaps/via/rules.mk
Co-authored-by: Drashna Jaelre <drashna@live.com>
* Update keyboards/nemui/nemui.c
Co-authored-by: Drashna Jaelre <drashna@live.com>
* Update keyboards/nemui/config.h
Co-authored-by: Ryan <fauxpark@gmail.com>
* Update keyboards/nemui/readme.md
Co-authored-by: Ryan <fauxpark@gmail.com>
* Update keyboards/nemui/rules.mk
Co-authored-by: Ryan <fauxpark@gmail.com>
* removed nemui.json as it was supposed to only be in via repo
* Update keyboards/nemui/keymaps/default/keymap.c
Co-authored-by: Ryan <fauxpark@gmail.com>
* Update keyboards/nemui/info.json
Co-authored-by: James Young <18669334+noroadsleft@users.noreply.github.com>
* Update keyboards/nemui/info.json
Co-authored-by: James Young <18669334+noroadsleft@users.noreply.github.com>
* Update keyboards/nemui/keymaps/via/keymap.c
Co-authored-by: James Young <18669334+noroadsleft@users.noreply.github.com>
* Update keyboards/nemui/keymaps/via/keymap.c
Co-authored-by: James Young <18669334+noroadsleft@users.noreply.github.com>
* added split backspace support for the nemui
* need to also update the qmk keymap
* fixed info.json to have the new keys
* vusb changes shouldn't have happened
Co-authored-by: Drashna Jaelre <drashna@live.com>
Co-authored-by: Ryan <fauxpark@gmail.com>
Co-authored-by: James Young <18669334+noroadsleft@users.noreply.github.com>
* update keyboards/helix/rev2/local_features.mk - Improved parsing of the `HELIX =` option
* add 'is_mac_mode()' into keyboards/helix/rev2/rev2.c
* update helix/rev2/keymaps/default/keymap.c: use rgblight query functions
* Makes the OLED driver used by the helix:default keymap switchable.
* use TOP/drivers/oled/oled_driver.c
`make helix:default`
or
`make OLED_SELECT=core helix:default`
* use helix/local_drivers/ssd1306.c
`make OLED_SELECT=local helix:default`
* Separated the OLED related code from keymap.c and moved it to oled_display.c.
* Change the 'led_test' keymap to follow the changes in the 'default' keymap.
* update helix/rev2/keymaps/default/oled_display.c
* add '#define OLED_UPDATE_INTERVAL 50' into keyboards/helix/rev2/config.h
* Support for OLED_UPDATE_INTERVAL, even for older types of OLED tasks
* add readme.md for helix/rev2
* Apply drashna's suggestions to rev2.c.
* Apply drashna's suggestions to rev3_4rows.c, rev3_5rows.c.
Co-authored-by: mtei <2170248+mtei@users.noreply.github.com>
* Initial commit of Geekboards Macropad V2 keyboard
* Apply suggestions from code review
Co-authored-by: Joel Challis <git@zvecr.com>
* Apply suggestions from code review: delete unnecessary files
* Fixed typos
* Apply suggestions from code review
Co-authored-by: Ryan <fauxpark@gmail.com>
* Change RGB_MATRIX config syntax following recent core changes
* Apply suggestions from drashna code review
* Remove unnecessary file (it is now defined in the core)
* Remove unnecessary code, due to PR 11084 approve
Co-authored-by: Joel Challis <git@zvecr.com>
Co-authored-by: Ryan <fauxpark@gmail.com>
* [Keyboard] New Keyboard - BDE
Added the Big Dill Extended by MechWild
* Corrected pinout for righty config
Corrected the copied line from the lefty config that had not been updated prior to this commit.
* Corrected the files that had been overwritten with old versions during testing.
* Update keyboards/mechwild/bde/lefty/config.h
* Made changes based on suggestions. Added GPL and split preference config.h lines into keymap level.
* Apply suggestions from code review
Readme cleanup
* Update keyboards/mechwild/bde/lefty/keymaps/fancy/config.h
* Update keyboards/mechwild/bde/lefty/keymaps/via/config.h
* Apply suggestions from code review
Corrects a stray style line in one of the readme files as well as correcting the name of the keymap layout from the inaccurate 3x14 name to just "layout"
* add bastyl
* no need to copy the folder anymore
* clean up according to PR rules
* remove via, fix disposition
* add reset button on right half
* Update readme.md
* Update keyboards/hidtech/bastyl/bastyl.h
Co-authored-by: Joel Challis <git@zvecr.com>
* Update keyboards/hidtech/bastyl/rules.mk
Co-authored-by: Joel Challis <git@zvecr.com>
* Update keyboards/hidtech/bastyl/config.h
Co-authored-by: Joel Challis <git@zvecr.com>
* move json, remove via files
* Update keyboards/hidtech/bastyl/keymaps/default/keymap.c
Co-authored-by: Ryan <fauxpark@gmail.com>
* Update keyboards/hidtech/bastyl/keymaps/default/keymap.c
Co-authored-by: Ryan <fauxpark@gmail.com>
* Update keyboards/hidtech/bastyl/keymaps/default/keymap.c
Co-authored-by: Ryan <fauxpark@gmail.com>
* Update keyboards/hidtech/bastyl/keymaps/default/keymap.c
Co-authored-by: Ryan <fauxpark@gmail.com>
* add GPL to c and h files
* Update keyboards/hidtech/bastyl/info.json
Change order to match layout macro
Co-authored-by: Joel Challis <git@zvecr.com>
* Update keyboards/hidtech/bastyl/config.h
Co-authored-by: Drashna Jaelre <drashna@live.com>
* serial define can be ommited, is used by default
Co-authored-by: Joel Challis <git@zvecr.com>
Co-authored-by: Ryan <fauxpark@gmail.com>
Co-authored-by: Drashna Jaelre <drashna@live.com>
* Adding customMK Genesis keyboard and keymap files
* Updated readme.md
fixed a typo
* Fixed code for QMK PR
* Updated syntax in config.h and changed dfu to flash in readme
Co-authored-by: Ray <ray@custommk.com>
* Added a dactyl promicro with a slightly different 6x6 layout
* updated keyboard layout
* Removed description as per code review
* refactored as per code review
* removed redundant config.h file
* removed and updated a couple of lines in rules.mk
* replaced symlink with copy of file
* removed lines in readme
* Update readme.md
Co-authored-by: ralphie02 <ralph.azucena@carbon60.com>
* Split dmac_desc declaration and definition
According to the official documentation[1] gcc 10 is more strict about
correct extern usage.
I've had to move the definition of dmac_desc and dmac_desc_wb from
i2c_master.h to the corresponding .c file. This could be an issue if
anyone includes the i2c_master.h file without liking with the object
file.
[1]: https://gcc.gnu.org/gcc-10/porting_to.html
* Remove the keymap_config definition from keymaps
The keymap_config def was conflicting with the one found in
tmk_core/common/magic.c. Declaring it extern in magic.c breaks a bunch
of keyboard that rely on that declaration (like the ergodox). Instead
I've removed the one found in the keymap.c of the massdrop alt.
The same change will have to be made to other keyboards.
* Allow APM32 MCUs on certain CannonKeys PCBs
* another one
* Update DFU suffix args
* missed one
* Apply suggestions from code review
Co-authored-by: Joel Challis <git@zvecr.com>
Co-authored-by: Joel Challis <git@zvecr.com>
* Hotfix for #11106: Rework LAYOUT_alice support; add LAYOUT_alice_split_bs
Accidentally missed backwards compatibility on the sneakbox/aliceclone in #11106, which broke stanrc85's Community Layout keymap.
* sneakbox/aliceclone: move 2u Backspace to column 6
* add new keyboard scatter42 by bbrfkr
* mod info.json to work
* mod info.json
* mod readme
* Update keyboards/scatter42/keymaps/default/keymap.c
Co-authored-by: Ryan <fauxpark@gmail.com>
* Update keyboards/scatter42/keymaps/default/keymap.c
Co-authored-by: Ryan <fauxpark@gmail.com>
* Update keyboards/scatter42/scatter42.h
Co-authored-by: Ryan <fauxpark@gmail.com>
* Update keyboards/scatter42/config.h
Co-authored-by: Ryan <fauxpark@gmail.com>
Co-authored-by: Ryan <fauxpark@gmail.com>
* Disable almost all ChibiOS subsystems.
* Modify ChibiOS config updater script to fixup mcuconf include, use develop as base instead of master.
* Add default early-init bootloader to F042/F072.
* Back to 100k freq.
* Add LAYOUT_alice support: fallacy
* Add LAYOUT_alice support: kb_elmo/sesame
* Add LAYOUT_alice support: cheshire/curiosity
* Add LAYOUT_alice support: evyd13/wonderland
* Add LAYOUT_alice support: mechlovin/adelais
* Update LAYOUT_alice support: projectkb/alice
The PR that added Alice community layout support for the projectkb/alice/rev2 simultaneously broke support for every other keyboard that supported LAYOUT_alice.
This commit partially reverts the offending PR. `LAYOUT_alice` for the projectkb/alice has been renamed to `LAYOUT_alice_split_bs`, and a correct 65-key `LAYOUT_alice` has been added.
Additionally, the `LAYOUTS` rule has been moved to keyboard level as the layout macros are shared between rev1 and rev2 boards, which means the layout options are the same for both revisions.
* Update ramonimbao/aelith info.json
Keyboard source was already correct to support LAYOUT_alice, but the layout tree was missing from info.json.
* Fork `alice` Community Layout...
... into Standard and Split Backspace versions
Also updates stanrc85's layout keymap to use 65 keys instead of the Split Backspace 66-key version.
* Update LAYOUT_alice support: sneakbox/aliceclone
Rework the sneakbox/aliceclone to use the Split Backspace Alice layout.
* Update LAYOUT_alice support: zoo/wampus
The layout macro that was `LAYOUT_alice` was 66 keys. This layout macro has been renamed to `LAYOUT_alice_split_bs`, and a 65-key `LAYOUT_alice` has been added.
Additionally, the 66-key macro has been rearranged to accept its keycodes in the intended order for Community Layout support.
* Update keyboards for `LAYOUT_alice_split_bs` support
* LAYOUT_alice_split_bs support: ergosaurus
* LAYOUT_alice_split_bs support: handwired/colorlice
* LAYOUT_alice(_split_bs) support: handwired/owlet60
* LAYOUT_alice_split_bs support: nightly_boards/alter/rev1
* LAYOUT_alice(_split_bs) support: sck/osa
* LAYOUT_alice_split_bs support: tgr/alice
* LAYOUT_alice(_split_bs) support: tkc/osav2
* LAYOUT_alice_split_bs support: xelus/valor/rev1
* Add Via keymap
* Via Enable in Rules.mk
* Update config.h
added nasp before Plexus75 in PRODUCT to better follow Via naming convention
* Update keymap.c
changed KC_CTRL to KC_LCTL
* Update config.h
took out the manu repeat
* Update rules.mk
* Create rules.mk
changed location of rules.mk for supporting Via
* Apply suggestions from code review
Co-authored-by: Ryan <fauxpark@gmail.com>
* Update keyboards/plexus75/keymaps/via/rules.mk
Co-authored-by: Ryan <fauxpark@gmail.com>
* Apply suggestions from code review
Co-authored-by: Drashna Jaelre <drashna@live.com>
Co-authored-by: Ryan <fauxpark@gmail.com>
Co-authored-by: Drashna Jaelre <drashna@live.com>
- Set all other ChibiOS defaults to 'off', when not targeting Proton-C
- Modified all existing F303 boards to point at the QMK_PROTON_C to ensure repeatable binary output
- Modified version.h generation so that SKIP_VERSION=yes generates the same output
Co-authored-by: Joel Challis <git@zvecr.com>
Co-authored-by: Ryan <fauxpark@gmail.com>
Co-authored-by: James Young <18669334+noroadsleft@users.noreply.github.com>
Co-authored-by: Ryan <fauxpark@gmail.com>
Co-authored-by: James Young <18669334+noroadsleft@users.noreply.github.com>
Co-authored-by: Drashna Jaelre <drashna@live.com>
* Cozykeys Speedo Configurator fix
Outgoing codebase worked when compiled locally, but not from QMK Configurator because its API requires an exact directory structure.
* fix make commands in the readme
* Branch point for 2020 November 28 Breaking Change
* Remove matrix_col_t to allow MATRIX_ROWS > 32 (#10183)
* Add support for soft serial to ATmega32U2 (#10204)
* Change MIDI velocity implementation to allow direct control of velocity value (#9940)
* Add ability to build a subset of all keyboards based on platform.
* Actually use eeprom_driver_init().
* Make bootloader_jump weak for ChibiOS. (#10417)
* Joystick 16-bit support (#10439)
* Per-encoder resolutions (#10259)
* Share button state from mousekey to pointing_device (#10179)
* Add hotfix for chibios keyboards not wake (#10088)
* Add advanced/efficient RGB Matrix Indicators (#8564)
* Naming change.
* Support for STM32 GPIOF,G,H,I,J,K (#10206)
* Add milc as a dependency and remove the installed milc (#10563)
* ChibiOS upgrade: early init conversions (#10214)
* ChibiOS upgrade: configuration file migrator (#9952)
* Haptic and solenoid cleanup (#9700)
* XD75 cleanup (#10524)
* OLED display update interval support (#10388)
* Add definition based on currently-selected serial driver. (#10716)
* New feature: Retro Tapping per key (#10622)
* Allow for modification of output RGB values when using rgblight/rgb_matrix. (#10638)
* Add housekeeping task callbacks so that keyboards/keymaps are capable of executing code for each main loop iteration. (#10530)
* Rescale both ChibiOS and AVR backlighting.
* Reduce Helix keyboard build variation (#8669)
* Minor change to behavior allowing display updates to continue between task ticks (#10750)
* Some GPIO manipulations in matrix.c change to atomic. (#10491)
* qmk cformat (#10767)
* [Keyboard] Update the Speedo firmware for v3.0 (#10657)
* Maartenwut/Maarten namechange to evyd13/Evy (#10274)
* [quantum] combine repeated lines of code (#10837)
* Add step sequencer feature (#9703)
* aeboards/ext65 refactor (#10820)
* Refactor xelus/dawn60 for Rev2 later (#10584)
* add DEBUG_MATRIX_SCAN_RATE_ENABLE to common_features.mk (#10824)
* [Core] Added `add_oneshot_mods` & `del_oneshot_mods` (#10549)
* update chibios os usb for the otg driver (#8893)
* Remove HD44780 References, Part 4 (#10735)
* [Keyboard] Add Valor FRL TKL (+refactor) (#10512)
* Fix cursor position bug in oled_write_raw functions (#10800)
* Fixup version.h writing when using SKIP_VERSION=yes (#10972)
* Allow for certain code in the codebase assuming length of string. (#10974)
* Add AT90USB support for serial.c (#10706)
* Auto shift: support repeats and early registration (#9826)
* Rename ledmatrix.h to match .c file (#7949)
* Split RGB_MATRIX_ENABLE into _ENABLE and _DRIVER (#10231)
* Split LED_MATRIX_ENABLE into _ENABLE and _DRIVER (#10840)
* Merge point for 2020 Nov 28 Breaking Change
* CapsUnlocked CU65
* Remove spurious in 65_ansi keymap
* Fix key next to Enter in 65_iso
* Reviewed fixes for CU65
Config, layout, copyright, build rules and documentation tweaks
Co-authored-by: Joel Challis <git@zvecr.com>
* KC_NUBS not KC_NUSH on the bottom row
* K104 is 2U backspace
* Small info.json and config.h tweaks
Co-authored-by: Ryan <fauxpark@gmail.com>
Co-authored-by: Joel Challis <git@zvecr.com>
Co-authored-by: Ryan <fauxpark@gmail.com>
* Initial Styrka Commit
Initial commit of basic working firmware.
- has basic 6.25u spacebar and fullsize backspace support in default keymap
- has basic 6.25u spacebar and split backspace support in split_bs keymap
- beginning work for via keymap (not complete)
* Viktus Styrka Update 1
First edit update for Viktus Styrka
- Corrected LAYOUT macros
- Updated keymaps
- Updated info.json to match LAYOUT macros
- Added and updated VIA keymap
- Added and updated ALL keymap
- Removed unused features from config
- Added more detailed board info to main readme
* Update info.json
Update info.json - missing end }
* Update to files in initial commit
As requested, changes made to:
- styrka.c
- rules.mk
- split_bs/keymap.c
- all/keymap.c
- info.json
- config.h
* Update keyboards/viktus/styrka/rules.mk
Co-authored-by: Ryan <fauxpark@gmail.com>
Co-authored-by: Ryan <fauxpark@gmail.com>
* update keymap for unikorn
* add new map
* update keymap
* update keymap
* update map
* update the current keymap
* update keymap so it accounts for mouse keys as well
* add extra control and shift, for when we need to use the other keys
* get me square and curly braces
* remove unused macros
* update these changes so far
* update ilpse keymap
* rmove a layer and simplify my layers a bit
* I think there's a working keymap now for the corne. let's leave this here.
* I thought maybe that helped? but who knows
* save changes made so far
* update madhatter keymap to match what I want
* switch to use lcmd for main alt
* update my curiosity keymap
* make curiosity via enabled
* add via keymap
* Update keyboards/crkbd/keymaps/madhatter/keymap.c
Co-authored-by: Drashna Jaelre <drashna@live.com>
* Update keyboards/crkbd/keymaps/madhatter/keymap.c
Co-authored-by: Drashna Jaelre <drashna@live.com>
* Update keyboards/crkbd/keymaps/madhatter/keymap.c
Co-authored-by: Drashna Jaelre <drashna@live.com>
* Update keyboards/crkbd/keymaps/madhatter/keymap.c
Co-authored-by: Drashna Jaelre <drashna@live.com>
* Update keyboards/primekb/prime_e/keymaps/madhatter/keymap.c
Co-authored-by: Drashna Jaelre <drashna@live.com>
* Update keyboards/crkbd/keymaps/madhatter/keymap.c
Co-authored-by: Drashna Jaelre <drashna@live.com>
* stick to enum
* add bootmagic stuff and update keymap
* switch to bootmagic lite
* fix typo
* cleanup for writing to LED
* consistency
* fix led pins
* Update keyboards/crkbd/keymaps/madhatter/keymap.c
Co-authored-by: Ryan <fauxpark@gmail.com>
* Update keyboards/crkbd/keymaps/madhatter/keymap.c
Co-authored-by: Ryan <fauxpark@gmail.com>
* Update keyboards/crkbd/keymaps/madhatter/keymap.c
Co-authored-by: Ryan <fauxpark@gmail.com>
* Update keyboards/crkbd/keymaps/madhatter/keymap.c
Co-authored-by: Ryan <fauxpark@gmail.com>
* Update keyboards/crkbd/keymaps/madhatter/keymap.c
Co-authored-by: Ryan <fauxpark@gmail.com>
* Update keyboards/crkbd/keymaps/madhatter/keymap.c
Co-authored-by: Ryan <fauxpark@gmail.com>
* Update keyboards/crkbd/keymaps/madhatter/keymap.c
Co-authored-by: Ryan <fauxpark@gmail.com>
* Update keyboards/crkbd/keymaps/madhatter/keymap.c
Co-authored-by: Ryan <fauxpark@gmail.com>
* Update keyboards/crkbd/keymaps/madhatter/keymap.c
Co-authored-by: Ryan <fauxpark@gmail.com>
* Update keyboards/crkbd/keymaps/madhatter/keymap.c
Co-authored-by: Ryan <fauxpark@gmail.com>
* fix build issue
* Update keyboards/crkbd/keymaps/madhatter/keymap.c
Co-authored-by: Ryan <fauxpark@gmail.com>
* Update keyboards/crkbd/keymaps/madhatter/keymap.c
Co-authored-by: Ryan <fauxpark@gmail.com>
* Update keyboards/crkbd/keymaps/madhatter/keymap.c
Co-authored-by: Ryan <fauxpark@gmail.com>
* Update keyboards/crkbd/keymaps/madhatter/keymap.c
Co-authored-by: Ryan <fauxpark@gmail.com>
* Update keyboards/crkbd/keymaps/madhatter/keymap.c
Co-authored-by: Ryan <fauxpark@gmail.com>
* Update keyboards/crkbd/keymaps/madhatter/keymap.c
Co-authored-by: Ryan <fauxpark@gmail.com>
* Update keyboards/crkbd/keymaps/madhatter/keymap.c
Co-authored-by: Ryan <fauxpark@gmail.com>
* Update keyboards/crkbd/keymaps/madhatter/keymap.c
Co-authored-by: Ryan <fauxpark@gmail.com>
* Update keyboards/crkbd/keymaps/madhatter/keymap.c
Co-authored-by: Ryan <fauxpark@gmail.com>
Co-authored-by: Khader Syed <khader.syed@aicure.com>
Co-authored-by: Drashna Jaelre <drashna@live.com>
Co-authored-by: Ryan <fauxpark@gmail.com>
* Fixed VIA keymap build warning on gcc 10.2.0, Fixed misleading LED function names, Fixed formatting
* Fix: Allow layer LED indicators to be overriden on the keymap level
* Implemented suggested change from led_set_kb callback to led_update_kb callback
* Apply suggestions from code review
Co-authored-by: Ryan <fauxpark@gmail.com>
* Update keyboards/idb/idb_60/idb_60.c
Co-authored-by: Drashna Jaelre <drashna@live.com>
Co-authored-by: Ryan <fauxpark@gmail.com>
Co-authored-by: Drashna Jaelre <drashna@live.com>
* Copied B65 and updated matrix
* Updated Caps LED Pin
* Updated most of the FW
* Updated errant names from Bolsa65 copy
* Keymap updates
* Moved to config.h LED indicators. Tested on PCB for functionality
* Add a new keyboard: yoichiro/lunakey_mini
* Modify the VENDOR and PRODUCT IDs.
* Remove unnecessary EOL characters.
* Remove unnecessary modified characters.
* Update the layer definition more simple.
* Change the product name.
* Change the LAYOUT name (append `_split_3x6_4`) and change keys order in info.json file.
* Configure new keyboard zoo/wampus
* Apply suggestions from code review
Update LED pins to defined defaults
Co-authored-by: Joel Challis <git@zvecr.com>
* Apply suggestions from code review
- Remove unused layers from default.
- Remove chibios patch comment
Co-authored-by: Ryan <fauxpark@gmail.com>
Co-authored-by: Joel Challis <git@zvecr.com>
Co-authored-by: Ryan <fauxpark@gmail.com>
Pulled some functionality from the endgame keymap for the Drop Ctrl.
* very shortened version of the Endgame keymap
* fixed pictures
* fixed link
* fixed link
* fix files
* add GREEN RGB
* fixed GREEN RGB
* not supposed to be in my fork...
* wasn't supposed to be in my fork.
* I have fixed the layer 0 RGB Settings; you can now apply layer using "COLOR" in the layout template.
* I've renamed to pregame, fixed several files
* added Underglow RGB layout, changed def
ault RGB color
* fixed the color of the default profile like i want it
* Added IRL Photo
* Update keymap.c
disabled debugging.
* Update keymap.c
* Update config.h
* Update README.md
* Update keymap.h
* Changed some settings on rules for clean up.
* Changed some settings on rules for clean up.
* fixed some errors, cleaned things up
* Update README.md
* Update README.md
* Update README.md
* Update README.md
* Update README.md
* Update README.md
* Update README.md
* Fixed changes recommended by Fauxpark
* Added changes recommended by fauxpark
* trying to fix my repo
* Still trying to fix merge issues
* changed to lowercase
* Delete reading.md
* Trying to rebase my repo
* stuck in rebase loop trying to fix local files and update
* updating readme file
This is based on feedback talking with crop_octagon about the device. Future trackballs will ship with ATMEL DFU for simplicity. This also includes some fixes and optimizations based on code review and tinkering on my own devices.
* Update the melody96/zunger layout to make typing Romance languages easier.
Move the combining accents to fn + (keys used by Mac OS for that purpose),
and move the fn key to be the one adjacent to the space bar, since one needs
to type combinations of that a lot more than one needs to type Greek letters
in normal use. (As determined by experiment)
Also clean up the comments.
Co-authored-by: Yonatan Zunger <zunger@desiderata.lan>
* update readme with relevant PCB versioning
* Add VIA keymap to e6v2 LE BMC
* add via keymap
* Update keyboards/exclusive/e6v2/le_bmc/keymaps/via/keymap.c
Co-authored-by: Joel Challis <git@zvecr.com>
* Update keyboards/exclusive/e6v2/oe_bmc/keymaps/via/keymap.c
Co-authored-by: Joel Challis <git@zvecr.com>
Co-authored-by: Joel Challis <git@zvecr.com>
Improvements and bug fixes for the keymaps kodi and default for
ANAVI Macro Pad 8:
- Add space to the end of string "Active layer: " for better
visibility on the mini I2C OLED display for both keymaps
- Replace "Main" with "Kodi" for the Kodi keymap
- Add comment with reference to Kodi documentation for the
available shortcuts in this keymap
Signed-off-by: Leon Anavi <leon@anavi.org>
* Added Via Support and Keymap
Via Specific Keymap for BM16s along with correction of the Vendor and Product ID.
* Made adjustments for PR 10863
Made adjustments based on feedback from Pull request 10853 for qmk master pull request
* Additional update for PR 10853
Same description as previous commit.
* Update .vscode/settings.json
Updating based on commit suggestion.
Co-authored-by: Ryan <fauxpark@gmail.com>
Co-authored-by: Ryan <fauxpark@gmail.com>
* Refactor the crkbd/via keymap and fix OLED bugs
* Revert "Refactor the crkbd/via keymap and fix OLED bugs"
This reverts commit dc9db029fc6b077fc7600b49e920b755c522d100.
* Fix OLED display bugs
* Remove unused functions
* Remove uncessary the key logger
* Add new lines at end of file
* Remove unnecesary extern for is_master
* Remove extern is_master from rev1.h
* Remove ssd1306 from common dir because its the legacy lib
* Update default keymap based the via keymap
* Remove foostan keymap because it will be legacy
* Revert Remove unnecesary extern for is_master
* Remove unnecessary backslashes.
* Makes the OLED driver used by the helix:five_rows keymap switchable.
* use TOP/drivers/oled/oled_driver.c
`make HELIX=stdole helix:five_rows`
* use helix/local_drivers/ssd1306.c
`make HELIX=oled helix:five_rows`
* Separated the OLED related code from keymap.c and moved it to oled_display.c.
* scan rate without OLED
* make HELIX=verbose,dispoff,scan helix/rev2:five_rows
use Helix original code
text data bss dec hex filename
18880 58 235 19173 4ae5 .build/helix_rev2_five_rows.elf
matrix scan frequency: 1590
* make HELIX=verbose,dispoff,scan,sc helix/rev2:five_rows
use split_common code
text data bss dec hex filename
18554 40 231 18825 4989 .build/helix_rev2_five_rows.elf
matrix scan frequency: 1202
* scan rate with helix/local_drivers/ssd1306.c
* make HELIX=verbose,dispoff,scan,oled helix/rev2:five_rows
use Helix original code
text data bss dec hex filename
24048 196 342 24586 600a .build/helix_rev2_five_rows.elf
matrix scan frequency: 739
* make HELIX=verbose,dispoff,scan,sc,oled helix/rev2:five_rows
use split_common code
text data bss dec hex filename
23750 176 338 24264 5ec8 .build/helix_rev2_five_rows.elf
matrix scan frequency: 642
* scan rate with drivers/oled/oled_driver.c
* make HELIX=verbose,dispoff,scan,stdole helix/rev2:five_rows
use Helix original code
text data bss dec hex filename
24590 210 798 25598 63fe .build/helix_rev2_five_rows.elf
matrix scan frequency: 293
* make HELIX=verbose,dispoff,scan,sc,stdole helix/rev2:five_rows
use split_common code
text data bss dec hex filename
24290 190 794 25274 62ba .build/helix_rev2_five_rows.elf
matrix scan frequency: 277
* clean up helix/rev2/keymaps/five_rows/keymap.c
* update five_rows/oled_display.c
* update helix/rev2/keymaps/five_rows/keymap.c: remove LAYOUT_kc()
* Ported the keymap from helix/rev2:five_rows to helix/rev3_5rows:five_rows.
* update five_rows/oled_display.c
* add License comment
I noticed that my KC_PPLS and KC_PENT keys weren't actually doing
anything. By looking at the ortho_6x4 layout, I guessed that maybe the
pins were incorrect and guessed the proper ones. Now, my numpad is fully
functional.
* added to handwired pill60
* Update keyboards/handwired/pill60/config.h and all other PR suggested changes
Deleted DESCRIPTION
Co-authored-by: Drashna Jaelre <drashna@live.com>
Update keyboards/handwired/pill60/readme.md
Smaller image in readme
Co-authored-by: Drashna Jaelre <drashna@live.com>
Update keyboards/handwired/pill60/info.json
Deleted key_count
Co-authored-by: Ryan <fauxpark@gmail.com>
Update keyboards/handwired/pill60/keymaps/default/keymap.c
Deleted backslash on keymap.c
Co-authored-by: Ryan <fauxpark@gmail.com>
Update keyboards/handwired/pill60/pill60.h
Deleted led.h
Co-authored-by: Ryan <fauxpark@gmail.com>
Update keyboards/handwired/pill60/blackpill_f401/rules.mk
Update stm32f401 rules.mk
Co-authored-by: Ryan <fauxpark@gmail.com>
Update keyboards/handwired/pill60/blackpill_f411/rules.mk
Update stm32f411 rules.mk
Co-authored-by: Ryan <fauxpark@gmail.com>
Update keyboards/handwired/pill60/bluepill/rules.mk
Update bluepill rules.mk
Co-authored-by: Ryan <fauxpark@gmail.com>
Update keyboards/handwired/pill60/rules.mk
Added comment on rules.mk to help ]
Co-authored-by: Ryan <fauxpark@gmail.com>
deleted bootloader_defs.h
added GPL2 + compatible license header
updated keymap readme
updated those that don't need common_config.h and deleted some unnecessary spaces in f411/rules.mk
updated default folder in rules.mk
* fix and simplify build files according to onekey example
* Added GPL2+ Compatible license header
* Updated information on info.json and hopefully de-cluttered branch
* Updated default encoder settings
* Updated info.json for after to be in the proper order
* Fixed maintainer name
* added Keyboard Southpaw66
* Housekeeping, shorten urls
* Housekeeping
* Row matrix pins were flipped, fixed
* housekeeping, extraneous punctuation
* bug-fixing
* bug-fixing
* Layout macro fixed
* Layout macro fixed again
* Update and rename Southpaw66,c to southpaw66.c
* Rename Southpaw66.h to southpaw66.h
* Update config.h
* Update info.json
* Change Southpaw66 to southpaw66
made change to case in all instances in code except where critical, such as in url's.
* Rename parent folder from Southpaw66 to southpaw66
* Rename parent folder from Southpaw66 to southpaw66
* Update info.json
* Update keyboards/rpiguy9907/Southpaw66/readme.md
updated image url to point to lower resolution image.
* Update config.h
re-capitalized Southpaw66 in product name.
* Rename Southpaw66 parent folder to southpaw66
* Rename parent folder from Southpaw66 to southpaw66
* rename parent folder from Southpaw66 to southpaw66
* rename parent folder from Southpaw66 to southpaw66
* Rename parent folder from Southpaw66 to southpaw66
* rename parent folder from Southpaw66 to southpaw66
* rename parent folder from Southpaw66 to southpaw66
* Update keyboards/rpiguy9907/southpaw66/readme.md
* Update keyboards/rpiguy9907/southpaw66/config.h
By default the `i2c_master` driver for ChibiOS uses the B6 pin for
`I2C1_SCL` and the B7 pin for `I2C1_SDA`. However, the ChibiOS board
file used for the F401 Blackpill board (`ST_STM32F401C_DISCOVERY`)
configures B6 as `I2C1_SCL` and B9 as `I2C1_SDA`, and if that
configuration is left unchanged, enabling the `i2c_master` driver
results in having two pins (B7 and B9) configured as `I2C1_SDA` at the
same time, which does not work properly (experimental results show that
the B9 pin still works as `I2C1_SDA` in that case, and the B7 pin does
not work).
Configure the B9 pin as an input with pull-up in `board_init()`, so that
the B7 pin can be configured as `I2C1_SDA` by the I2C driver.
* Add new keyboard Pan
Encoder switches still need work
* New keyboard Pan
Should be complete
* Split MCU selection into 2 revision folders
* [rgbkb/pan] Make requested changes for PR
Additionally, set DEFAULT_FOLDER to rev1, and default rev1
to atmega32a (as all shipped kits include an atmega32a)
* Apply suggestions from code review
* Fix default keymap typo
* add usb max power define
* Commit suggested changes
* Update keyboards/rgbkb/pan/config.h
* Apply suggestions from code review
Small copyright updates
* Apply suggestions from code review
* Personal keymap
- fix quoting in description
fix issue with userspace disabling audio
wip
Update keyboards/kingly_keys/little_foot/keymaps/yanfali/rules.mk
Co-authored-by: Ryan <fauxpark@gmail.com>
* Update keyboards/kingly_keys/little_foot/config.h
Co-authored-by: Nick Brassel <nick@tzarc.org>
Co-authored-by: Yan-Fa Li <yanfa.li@fireeye.com>
Co-authored-by: Ryan <fauxpark@gmail.com>
Co-authored-by: Nick Brassel <nick@tzarc.org>
* Update massdrop/alt keyboard to fix Caps Lock LED flickering.
* Fix Caps-lock LED during underglow-only for massdrop/ctrl
* Update keyboards/massdrop/ctrl/keymaps/default/keymap.c
* feat: new keymapping for idobo
* fix: added licenses. converted int to uint8_t where applicable
* fix: addressed zvecr stylistic enhancements
* fix: replaced rgblight_sethsv with rgblight_sethsv_noeeprom
* First pass
* Add config options to docs
* Update some wording
* Slight tidy up of backlight caps logic
* Init pin to correct state
* Move init location
* Reverse default state
Specifically, the lgreen variable isn't used, and avr-gcc 8.x complains about this. To prevent it from being an issue, just set all of these led variables to be unused.
* add big spacebar default
* add rev1 big space
* add big spacebar default
* add rev1 big space
* Fixed copyright statements
Removed unused RGBRST keycode and bootmagic swaps
* Minor Tweak
* Refactor spacebar defines.
* Add TMO50 layout
* Rename Atreus keymap.
* Refactor Atreus for readability.
* Eliminate tapdance quote and tweak maltroff.
* Factor out tapdance.
* Add some fancy combos and keys.
* Remove combos for now because they cause pain.
* WIP visualizer
* Alternate method for reset
* WIP2 visualizer
* Layer text tweak.
* Add made-up layout Nortron as a combination of Norman and Maltron.
* Add backspace.
* Add Talljoe keymap to Prime E.
* Fix double-colon so it doesn't press enter if shift is released early.
* Use new make command.
* Bring some modern standards into code and add licenses.
* Remove QMK_KEYBOARD_CONFIG_H and fixup QMK_KEYBOARD_H.
* Move from `biton32` to `get_highest_layer`.
* Remove PREVENT_STUCK_MODIFIERS
* Update keyboards/thevankeyboards/minivan/keymaps/talljoe-minivan/config.h
Add Eco keymap, factor Crkbd keymap to community layout, other minor tweaks
* Remove outdated Crkbd Ctrl key positioning info
* Add Left Alt key to Lily58 keymap
* Lily58 no longer overrides default TAPPING_TERM
* Refactor Crkbd keymap to use new community layout
* Fix underglow animations for Crkbd w/ Split Common
* Add initial Eco keymap
* Update outdated reference to Crkbd layout
* Add keymap links to userspace readme
* Add copyright notices to files changed in this PR
* add dp60 indicator mode
* update according to #7720
* added license header and move the ws2812 codes to a seperate c file
* fixed conflict with master
* nullbitsco/nibble: rework LAYOUT_all
... and update via keymap accordingly.
* compress info.json LAYOUT_all tree
Only changes the white space.
* rebuild info.json LAYOUT_all tree
Note: this commit makes the visual layout the ANSI layout with a split left Shift, instead of being the same as the ISO layout.
* unify code styles
Make logically-unchanged code blocks similar in appearance to logically-changed blocks.
* correct LAYOUT_iso key sequence
Move ISO Enter's object to its proper place.
* exent VIA support
* minor cleanups
* Update keyboards/exent/config.h
Co-authored-by: Ryan <fauxpark@gmail.com>
* Update keyboards/exent/config.h
Co-authored-by: Ryan <fauxpark@gmail.com>
Co-authored-by: Ryan <fauxpark@gmail.com>
* Added ad/freebird60.
* Moved freebird60 keyboard. Added VIA keymap.
* Updated `keebsforall/freebird60` README to include image.
* Update keyboards/keebsforall/freebird60/readme.md
Co-authored-by: Ryan <fauxpark@gmail.com>
* Update keyboards/keebsforall/freebird60/readme.md
Co-authored-by: Ryan <fauxpark@gmail.com>
Co-authored-by: Ryan <fauxpark@gmail.com>
* Adding Evan Travers' Keyboardio Atreus branch.
Initial commit of my KeyboardIO Atreus layout.
This is a direct copy of my default Atreus layout, with blank spaces
for the two additional keys.
* Added MACLOCK macro to keymap.c
* Updates to Keyboardio Atreus keymap and readme.
* Adding arrows to bottom row of RAISE and LOWER layers
* bringing the rest of the master branch to my working branch.
* Changes to my KeyboardIO Atreus keymap & readme
* Changes to keymap.
* Adding Evan Travers' Keyboardio Atreus branch.
Initial commit of my KeyboardIO Atreus layout.
This is a direct copy of my default Atreus layout, with blank spaces
for the two additional keys.
* Added MACLOCK macro to keymap.c
* Updates to Keyboardio Atreus keymap and readme.
* Adding arrows to bottom row of RAISE and LOWER layers
* bringing the rest of the master branch to my working branch.
* Changes to my KeyboardIO Atreus keymap & readme
* Changes to keymap.
* Added GPL2+ compatible license header.
Co-authored-by: Ian Sterling <503326@MC02YT9K9LVCF.tld>
* Firmware initial commit, still has a few bugs - mainly rotary encoders do not work and needs cleaning up
* Fixed the volume control issue and limited the RGB brightness (can be really bright), added the ability to switch LED mode with left encoder click, and added via support (untested)
* Remove define that should go in config.h
* Removed define that should be in config.h
* Removed LTO_ENABLE as suggested - has issues on ARM
Co-authored-by: Drashna Jaelre <drashna@live.com>
* Added the correct define for OLED screen size
* Applied suggested change to remove description
Co-authored-by: Ryan <fauxpark@gmail.com>
* Made suggested change to remove backslashes
Co-authored-by: Ryan <fauxpark@gmail.com>
* Suggested change made to rgblight
Co-authored-by: Ryan <fauxpark@gmail.com>
* Suggested change made to rgblight
Co-authored-by: Ryan <fauxpark@gmail.com>
* Suggested change made to remove backslashes
Co-authored-by: Ryan <fauxpark@gmail.com>
* Suggested change made to rgblight
Co-authored-by: Ryan <fauxpark@gmail.com>
* Update keyboards/rocketboard_16/rocketboard_16.c
Co-authored-by: Ryan <fauxpark@gmail.com>
* Added suggested comments
Co-authored-by: Ryan <fauxpark@gmail.com>
* Made suggested changes to rules file
Co-authored-by: Ryan <fauxpark@gmail.com>
* Added suggested change to rgblight
Co-authored-by: Ryan <fauxpark@gmail.com>
* Added info.json for QMK configurator
* Update readme.md
* This change makes the firmware work... through magic... seriously, no idea - but it works!
* Updated dimming step, OLED functionality, and rules for formatting
- Changed the dimming step size for smoother dimming with the reduced range
- Added lots of OLED functionality - QMK logo and title at top, num/caps/scroll lock status, and backlight brightness level
- Updated the rules.mk file to comply more closely with the formatting guidelines
* Fixed tab issues
Co-authored-by: Ryan <fauxpark@gmail.com>
* Updated to use bootmagic lite with the key that usually turns rgb on/off
Co-authored-by: Drashna Jaelre <drashna@live.com>
Co-authored-by: Ryan <fauxpark@gmail.com>
* Add Z70Ultra which is a Hotsawp RGB 65% keyboard
* Update keyboards/melgeek/z70ultra/z70ultra.h
Co-authored-by: Ryan <fauxpark@gmail.com>
* Update keyboards/melgeek/z70ultra/keymaps/default/keymap.c
Co-authored-by: Ryan <fauxpark@gmail.com>
* Update keyboards/melgeek/z70ultra/keymaps/via/keymap.c
Co-authored-by: Ryan <fauxpark@gmail.com>
* Update keyboards/melgeek/z70ultra/z70ultra.c
Co-authored-by: Ryan <fauxpark@gmail.com>
* Update keyboards/melgeek/z70ultra/readme.md
Co-authored-by: Ryan <fauxpark@gmail.com>
* Update keyboards/melgeek/z70ultra/rev1/rules.mk
Co-authored-by: Ryan <fauxpark@gmail.com>
* Update keyboards/melgeek/z70ultra/z70ultra.c
Co-authored-by: Ryan <fauxpark@gmail.com>
* Update keyboards/melgeek/z70ultra/z70ultra.c
Co-authored-by: Ryan <fauxpark@gmail.com>
* Update keyboards/melgeek/z70ultra/z70ultra.c
Co-authored-by: Ryan <fauxpark@gmail.com>
* Update keyboards/melgeek/z70ultra/z70ultra.h
Co-authored-by: Ryan <fauxpark@gmail.com>
* Update readme.md
* Update info.json
update the name of layout to consistent the keyboard.
* Update keyboards/melgeek/z70ultra/z70ultra.c
Co-authored-by: Ryan <fauxpark@gmail.com>
* Update keyboards/melgeek/z70ultra/z70ultra.c
Co-authored-by: Ryan <fauxpark@gmail.com>
* Update keyboards/melgeek/z70ultra/info.json
Co-authored-by: Ryan <fauxpark@gmail.com>
* Update keyboards/melgeek/z70ultra/keymaps/default/keymap.c
Co-authored-by: Ryan <fauxpark@gmail.com>
* Update keyboards/melgeek/z70ultra/keymaps/via/keymap.c
Co-authored-by: Ryan <fauxpark@gmail.com>
* Add Z70Ultra
* Support Z70Ultra
[Modified] info.json to support two different layouts
[Add] rules.mk to support default folder
* Update keyboards/melgeek/z70ultra/rev1/rules.mk
Co-authored-by: Ryan <fauxpark@gmail.com>
* Update keyboards/melgeek/z70ultra/config.h
Co-authored-by: Ryan <fauxpark@gmail.com>
* remove excessive arguments from LAYOUT_split_space
* Update keyboards/melgeek/z70ultra/info.json
Co-authored-by: James Young <18669334+noroadsleft@users.noreply.github.com>
* Update keyboards/melgeek/z70ultra/info.json
Co-authored-by: James Young <18669334+noroadsleft@users.noreply.github.com>
* Update keyboards/melgeek/z70ultra/keymaps/default/keymap.c
Co-authored-by: James Young <18669334+noroadsleft@users.noreply.github.com>
* Update keyboards/melgeek/z70ultra/z70ultra.h
Co-authored-by: James Young <18669334+noroadsleft@users.noreply.github.com>
* Update keyboards/melgeek/z70ultra/z70ultra.h
Co-authored-by: James Young <18669334+noroadsleft@users.noreply.github.com>
* Update keyboards/melgeek/z70ultra/keymaps/via/keymap.c
Co-authored-by: James Young <18669334+noroadsleft@users.noreply.github.com>
* Update keyboards/melgeek/z70ultra/keymaps/default/keymap.c
Co-authored-by: James Young <18669334+noroadsleft@users.noreply.github.com>
* Update keyboards/melgeek/z70ultra/rev1/rules.mk
Co-authored-by: James Young <18669334+noroadsleft@users.noreply.github.com>
* Update keyboards/melgeek/z70ultra/keymaps/via/keymap.c
Co-authored-by: James Young <18669334+noroadsleft@users.noreply.github.com>
* Update keyboards/melgeek/z70ultra/keymaps/default/keymap.c
Co-authored-by: James Young <18669334+noroadsleft@users.noreply.github.com>
* Update keyboards/melgeek/z70ultra/keymaps/via/keymap.c
Co-authored-by: James Young <18669334+noroadsleft@users.noreply.github.com>
* Update keyboards/melgeek/z70ultra/keymaps/via/keymap.c
Co-authored-by: James Young <18669334+noroadsleft@users.noreply.github.com>
* Use macro replace with the literal for CS & SW
* Update keyboards/melgeek/z70ultra/z70ultra.c
Co-authored-by: Drashna Jaelre <drashna@live.com>
* [Keyboard] Support MJ61 which is a 60% ANSI STD Hotswap RGB keyboard
* Update keyboards/melgeek/mj61/mj61.c
Co-authored-by: Drashna Jaelre <drashna@live.com>
* Update keyboards/melgeek/mj61/mj61.c
Co-authored-by: Drashna Jaelre <drashna@live.com>
* [Keyboard] MJ61 Add license header for files and the link for readme
* Update keyboards/melgeek/mj61/readme.md
Co-authored-by: Ryan <fauxpark@gmail.com>
* Update keyboards/melgeek/mj61/rev1/config.h
Co-authored-by: Ryan <fauxpark@gmail.com>
* Update keyboards/melgeek/mj61/rev1/rules.mk
Co-authored-by: Ryan <fauxpark@gmail.com>
* Update keyboards/melgeek/mj61/mj61.c
Co-authored-by: Ryan <fauxpark@gmail.com>
* Update keyboards/melgeek/mj61/mj61.c
Co-authored-by: Ryan <fauxpark@gmail.com>
* Add GPL for files
* Update keymaps/default/keymap.c
* Update keymaps/via/keymap.c
* Update keyboards/melgeek/z70ultra/z70ultra.c
Co-authored-by: Drashna Jaelre <drashna@live.com>
* Update keyboards/melgeek/z70ultra/z70ultra.c
Co-authored-by: Drashna Jaelre <drashna@live.com>
* [Fixed] remove this code cause it's useless.
Co-authored-by: Ryan <fauxpark@gmail.com>
Co-authored-by: James Young <18669334+noroadsleft@users.noreply.github.com>
Co-authored-by: Drashna Jaelre <drashna@live.com>
KiCad is a cross platform, free and open source electronics design
automation (EDA) suite. It was used to create ANAVI Macro Pad 8.
This keymap contains 2 layers for KiCad hotkeys and a 3rd layer
for controlling the backlighting and the underlighting.
- Layer for KiCad Schematic hotkeys:
m - to move selected component
r - to rotate selected component
w - to wire components
v - to edit component value
F1 - zoom in
F2 - zoom out
F4 - zoom center
- Layer for KiCad PCB layout hotkets:
m - to move selected component
r - to rotate selected component
x - to route a new track
v - to add a via
F1 - zoom in
F2 - zoom out
F4 - zoom center
Signed-off-by: Leon Anavi <leon@anavi.org>
OBS keymap for ANAVI Macro Pad 8 with the following shortcuts:
- Shortcuts useful for switching scenes on the 1st row:
Hold Left Control, Shift, Alt and GUI and press F9
Hold Left Control, Shift, Alt and GUI and press F10
Hold Left Control, Shift, Alt and GUI and press F11
Hold Left Control, Shift, Alt and GUI and press F12
- Center to screen: Ctrl+D
- Fit to screen: Ctrl+F
- Move source to top of sources list: Ctrl+Home
Signed-off-by: Leon Anavi <leon@anavi.org>
* Added basic via keymap
* Added via keymaps and changed config Product and Vendor ID
* Update keyboards/exclusive/e65/keymaps/via/keymap.c
Co-authored-by: Ryan <fauxpark@gmail.com>
* Update keyboards/exclusive/e65/config.h
Co-authored-by: Ryan <fauxpark@gmail.com>
* Refactored via/keymap.c to use LAYOUT_all
* Refactored e65.h to remove nested matrix layouts
* Previous commit missed LAYOUT_65_ansi_blocker. Fixed
Co-authored-by: Ryan <fauxpark@gmail.com>
* docs(massdrop alt): update link to loader releases
Update the link to the Massdrop Loader releases page to point to the releases index rather than release 0.0.1
* docs(massdrop ctrl): update link to loader releases
* KBDfans Bella Soldered: add readme
* add image to readme
* tidy-up Configurator layout data
Key positioning was not true to the assembled board.
* reduce readme redundancy
* Add files via upload
* Add files via upload
* Add files via upload
* Update config.h
* Update rules.mk
* Update config.h
* Update config.h
* Update config.h
* Update config.h
* Add files via upload
* Removing duplicate files
* Resolve VID and PID collisions as requested
Taken the 0xFEED for vendor ID as suggested in vendor documentation and an available PID
* add a GPL2+ compatible license header as requested
Added the GPL2+ header to keymap.c file
* Update keyboards/genone/eclipse_65/config.h
Co-authored-by: Ryan <fauxpark@gmail.com>
* Update keyboards/genone/eclipse_65/readme.md
Co-authored-by: Ryan <fauxpark@gmail.com>
* Update keyboards/genone/eclipse_65/eclipse_65.c
Co-authored-by: Ryan <fauxpark@gmail.com>
* Update keyboards/genone/eclipse_65/rules.mk
Co-authored-by: Ryan <fauxpark@gmail.com>
* Update keyboards/genone/eclipse_65/keymaps/default/keymap.c
Co-authored-by: Ryan <fauxpark@gmail.com>
* Update keyboards/genone/eclipse_65/keymaps/default/keymap.c
Co-authored-by: Ryan <fauxpark@gmail.com>
* Update keyboards/genone/eclipse_65/eclipse_65.h
Co-authored-by: Ryan <fauxpark@gmail.com>
* Corrected items on rules.mk as suggested
Thanks for the comment
I removed suggested items, corrected some spacing issues, and added suggested items.
* Deleted genone_main.c file
Thanks for the comment.
Deleted genone_main.c file as requested
Co-authored-by: Ryan <fauxpark@gmail.com>
* my alice community layout
* add LAYOUT_alice support to projectkb/alice/rev2
* add addition BSPC key to default layout
* add define to support LAYOUT_default
OBS keymap for ANAVI Macro Pad 8 with the following shortcuts:
- Shortcuts useful for switching scenes on the 1st row:
Hold Left Control, Shift, Alt and GUI and press F9
Hold Left Control, Shift, Alt and GUI and press F10
Hold Left Control, Shift, Alt and GUI and press F11
Hold Left Control, Shift, Alt and GUI and press F12
- Center to screen: Ctrl+D
- Fit to screen: Ctrl+F
- Move source to top of sources list: Ctrl+Home
Signed-off-by: Leon Anavi <leon@anavi.org>
* Add pteron44
* Apply suggestions from code review
Co-authored-by: Ryan <fauxpark@gmail.com>
* Apply suggestions from code review part 2
Co-authored-by: Ryan <fauxpark@gmail.com>
Co-authored-by: Ryan <fauxpark@gmail.com>
Zoom keymap for ANAVI Macro Pad 8 with the following shortcuts:
* Alt+V: Start/stop video
* Alt+A: Mute/unmute my audio
* Alt+M: Mute/unmute audio for everyone except the host
* Alt+S: Start/stop screen sharing
* Alt+R: Start/stop local recording
* Alt+P: Pause/resume recording
* Alt+C: Start/stop cloud recording
* Switch to 2nd layout to control backlighting and underlighting
Signed-off-by: Leon Anavi <leon@anavi.org>
* Add NIBBLE keyboard
* Update VID for VIA compatibility
* Add QMK PR feedback
* Update matrix_init_remote_kb()
* Update with requested changes
Clean up config, makefile rules, and keymap files
* Update with changes for unified ANSI/ISO layout
* Add NO_USB_STARTUP_CHECK note in readme
* Add license info, update with PR changes
-Refactor encoder, via_extras code
-Refactor VIA specific code to live in keymap folder
-Remove non-inclusive naming in remote keyboard.c/h
-Add documentation to remote_keyboard.c
-Add compiler check for vusb_detect for non-avr micros
* Fix print formatter in encoder handler
Co-authored-by: Nick Brassel <nick@tzarc.org>
* Small PR updates
-Remove unneded matrix code from nibble.c
-Clean up include code in nibble_encoder.h
* Update Big LED headerfile
-Declare Big LED functions in header file (derp)
* Update keyboards/nullbitsco/nibble/nibble.c
-Update with drashna's suggested CAPS LED code change
Co-authored-by: Drashna Jaelre <drashna@live.com>
* Update keyboards/nullbitsco/nibble/rules.mk
-Update with drasha's suggested makefile formatting changes
Co-authored-by: Drashna Jaelre <drashna@live.com>
* Fix caps_lock typo
Co-authored-by: Nick Brassel <nick@tzarc.org>
Co-authored-by: Drashna Jaelre <drashna@live.com>
* Initial userspace
* DZ60 map
* Quefrency map
* Sinc map
* Set up MAKE key for all personal maps
* Light userspace cleanup
* Formatting and comments zzz...
* Licensing and userspace README
* Swap: EXTRAFLAGS -> LTO_ENABLE in userspace rules.mk
Co-authored-by: Ryan <fauxpark@gmail.com>
* Improve KC_MAKE: KC_ENT -> \n
Co-authored-by: Ryan <fauxpark@gmail.com>
* Swap left grouping on _FN for pairs
* Add '?' -> backslash on _FN
* Remove commented code
* Organize lines in rules.mk
* Add left hand scroll keys
* Move configs to config.h
* License blitz
Co-authored-by: Ryan <fauxpark@gmail.com>
* initial port of keymap to latest qmk version
* forgot to add space cadet shift, fixed
* corrected colors and added color macros
* added custom rgb matrix effects
* enabled extrakey
* updated readme
* Added GPL3 License Headers
* Added images to readme
* clang-format
* Apply suggestions from code review
Co-authored-by: Ryan <fauxpark@gmail.com>
* renamed README.md to readme.md
Co-authored-by: Ryan <fauxpark@gmail.com>
* Add IDOBAO ID87.
* Layout changes.
* Updated rules.mk
* Implemented capslock led.
* Updated readme to new version.
* Fixed the info.info.json for the new layout.
* Updated RGB number config.h.
* Update rules.mk to try and line up nicely.
* Fix via keymap.keymap.c
* Fix all the auto-created labels.
* Update keymaps again.
* Add additional RGB commands.
* Update keyboards/id87/info.json
Format update.
Co-authored-by: Ryan <fauxpark@gmail.com>
* Update keyboards/id87/readme.md
Remove quotations.
Co-authored-by: Ryan <fauxpark@gmail.com>
* Update keyboards/id87/readme.md
Change Flash to Flashing
Co-authored-by: Ryan <fauxpark@gmail.com>
* Update keyboards/id87/rules.mk
Alignment Fix
Co-authored-by: Ryan <fauxpark@gmail.com>
* Update keyboards/id87/info.json
Remove qmk_converter link meta.
Co-authored-by: James Young <18669334+noroadsleft@users.noreply.github.com>
Co-authored-by: Ryan <fauxpark@gmail.com>
Co-authored-by: James Young <18669334+noroadsleft@users.noreply.github.com>
* Adding my keymap
* Add a starter keymap for kyria
* Updated keymap
* Add auto shift, tapping modifications and gravatar oled bitmap
* Add flashing helper scripts
* Updates to my keymap
* Enable raw hid and rgblight sleep
* Cleanup
* Updated keymap and board features
* Remove some RGB modes for space
* Start working on a miryoku-like keymap.
This adds homerow mods to my keymap on the base layer and adds
a game layer that doesnt have them
* more work on keymaps
* Fine tuning home row mods
* update keymap
* Keymap update
* add split transport
* keymap
* cherry pick from develop
* merge develop
* fix
* keymap iterations
* Refactoring
* continued refactoring
* messing with rgb
* update layer coloring
* continued refactoring
* more features
* modifier color
* Move stuff to userspace
* Moving stuff out to userspace
* refactoring into userspace
* More refactoring
* Fixing some errors in the keymap and changing the oled output
* Sync zen1 keymap to my userspace config
* Update copyright notices and revert transport.c to master
* Swap tab and esc
* Remove a file accidentally created
* Use LTO_ENABLE to turn on Link_Time_Optimization
* Drop modtap thumbs on game layout
* Update game keymap
* More iteration on the game keymap
* Add oled indications of kitty and i3 mod
* Promote colemak to default
* Update tapping term for modtap keys
* Add per key tapping term
* Use left modifiers on right side
* [Keyboard] Support MJ61 which is a 60% ANSI STD Hotswap RGB keyboard
* Update keyboards/melgeek/mj61/mj61.c
* Update keyboards/melgeek/mj61/mj61.c
* [Keyboard] MJ61 Add license header for files and the link for readme
* Update keyboards/melgeek/mj61/readme.md
* Update keyboards/melgeek/mj61/rev1/config.h
* Update keyboards/melgeek/mj61/rev1/rules.mk
* Update keyboards/melgeek/mj61/mj61.c
* Update keyboards/melgeek/mj61/mj61.c
* [Keyboard] Support MoJo75 which is a 75% Hotswap RGB keyboard
* Update melgeek/mojo75 vid and pid
Add melgeek/mojo75/rev1/rev1.c
* Update MelGeek mojo75 VIA layout
* Add my own keymap
* Layer 0: Workman
* Layer 1: RSTHD (my own take on it)
* Layer 2: Mouse
* Layer 3: Navigation
* Layer 4: Symbols right
* Layer 5: Symbols left
* Layer 6: Fn keys
* Layer 7: Numbers
* Layer 8: Vim and misceallaneaous accessible from any other layer
* Move the current code to a 0.1 folder in preparation for upcoming changes
Version 0.2 is currently being prototyped and uses an arm chip which
will need its own firmware.
There is also the Ferris sweep which uses a pro-micro compatible board
which will need its own directory.
* Move Ferris out of handwired and into the light
The keyboard is now well out of the prototype phase as tens of them have
been produced and acquired by various people.
With 0.2 coming out, adoption is going to increase again as the board
will be available for sale at some recognized vendors.
Now is probably a good time to recognize its status as more than a
prototype :)
* Add code for the Ferris Sweep (a.k.a cradio)
The Ferris Sweep is a creation of the talented @davidphilipbarr, a.k.a DPB.
It has the key layout of a Ferris and uses a pro-micro connected to the
switches via direct pins so that diodes are not needed and the soldering
is minimal.
With their blessing, I took the code for it from DPB's own repo:
https://github.com/davidphilipbarr/36keys/tree/master/qmk/cradio
and did some adaptations such as removing commented out code, enabling
EE_HANDS and mouse keys for consistency with my existing Ferris code.
* Fix indentation in rules.mk
* Fix indentation in sweep's config
* Remove unnecessary lines from sweep's rules.mk
* Remove unnecessary lines from sweep's rules.mk
* Rename 0.1 to 0_1
This avoids the dot looking like the separation between a filename and
its extension.
In the same commit, bring matrix.c to the 0_1 folder as this was needed
for the code to compile properly (matrix.c is referred to in the readme
under `0_1` and is specific to that revision of the firmware).
* Update copyright statements for Sweep
* add kabraxcis keymap
this is a user keymap for a member of my group-buy. this is the creation commit
* add voaraq keymap
this is a user keymap for a member of my group-buy
* update kabraxcis keymap
* add licenses
* basic keys working
* more stuff
* more stuff
* empty upper layers
* more stuff
* cleanup
* more stuff
* add the letter 'j'
* add '0' to layer 4
* implement umlauts and eszett with menu key as compose key
* add comment
* renamed layout
* change copyright notice
* add separate readme file
* Add Launchpad keymap
Note: RGB and Audio won't work when using B pins for audio
* Add support for rgb matrix on launchpad
* Update config for launchpag
* Disable wait on layer change
* Update config for ErgoDox EZ
* Fixup rgb light userspace code
* Move Corne layout to community layouts folder
* Update config for corne to support community layouts
* Add license header to files
* Minor cleanup of userspace config
* Update Pimironi Trackball code
* Increase debounce time on ergodox
* Fix keymap handling
* Enable wait for USB for moonlander
* Update/add license headers
* fix review issues
* added spooky keyboard t
o boardsouce folder
* restoring to clean start I think
* added back in my files for this keyboard
* Update keyboards/boardsource/holiday/spooky/config.h
* Update keyboards/boardsource/holiday/spooky/keymaps/rip_mx/keymap.c
* Update keyboards/boardsource/holiday/spooky/readme.md
* Update keyboards/boardsource/holiday/spooky/spooky.h
* updated all keymaps to support 2x3 ortho
* Apply suggestions from code review
* move drakon to jagdpietr directory
* Updates
Recommended changes implemented in this commit due to progress loss in last commit
* Update vusb
* Update keyboards/jagdpietr/drakon/drakon.c
* Add nordic keymap
Changes from default:
- Change button right of `LSHIFT` to `KC_NUBS`
- Add some more keys to the second layer.
* Add sleepmode functionality
Added a sleepmode, this turns of the rgb_matrix if no key was pressed for x minutes. Not default on, so you have to enable it by defining `SLEEPMODE_ENABLED`.
* Move all sleepmode config to config.h, rename keymap
- Move all configurations for sleepmode to keymap config.h
- rename keymap to include reference to it having sleepmode (suggestion from guy the discord-server)
- add copyright in config.h
* Update keyboards/bm60rgb_iso/keymaps/iso_nordic_sleepmode/config.h
* Update keyboards/bm60rgb_iso/keymaps/iso_nordic_sleepmode/keymap.c
* Update keyboards/bm60rgb_iso/keymaps/iso_nordic_sleepmode/keymap.c
* Update keyboards/bm60rgb_iso/keymaps/iso_nordic_sleepmode/keymap.c
* Update keyboards/bm60rgb_iso/keymaps/iso_nordic_sleepmode/keymap.c
* Update keyboards/bm60rgb_iso/keymaps/iso_nordic_sleepmode/keymap.c
* [Keyboard] Support MJ64 which is a 60% Hotswap RGB keyboard with arrows
and the size of left shift is 2.25U
* Update keyboards/melgeek/mj64/mj64.h
* Update keyboards/melgeek/mj64/keymaps/default/keymap.c
* Update keyboards/melgeek/mj64/keymaps/via/keymap.c
* Update keyboards/melgeek/mj64/keymaps/via/keymap.c
* Update keyboards/melgeek/mj64/keymaps/default/keymap.c
* Update keyboards/melgeek/mj64/keymaps/via/keymap.c
* Update keyboards/melgeek/mj64/rev2/rules.mk
* Update keyboards/melgeek/mj64/rev1/rules.mk
* Update keyboards/melgeek/mj64/keymaps/via/keymap.c
* Update keyboards/melgeek/mj64/info.json
* Update keyboards/melgeek/mj64/info.json
* Update keyboards/melgeek/mj64/rev1/config.h
* Update keyboards/melgeek/mj64/rev2/config.h
* Update the VID and PID in mj64/config.h
add the rev1/rev1.c
add the rev2/rev2.c
* [Keyboard] GH60 v1.3 Support
* clean up info.json
Update key sizes and positioning.
* add readme
* add image to readme
* fix up info.json LAYOUT_all
* add LAYOUT_60_ansi
I'm guessing at this based on a photo of the PCB. Chances are high that this isn't fully functional.
* add matrix block comment to v1p3.h
* add default_ansi keymap
* add keymap readme files
* fix LAYOUT_60_ansi macro
* enable 60_ansi Community Layout support
* add layouts for 60_ansi_arrow
Add LAYOUT_60_ansi_arrow and LAYOUT_60_ansi_arrow_split_bs macros. (The user helping me test runs the split Backspace variant.)
* add Tsangan, HHKB, and 64_ansi layout macros
* add factory keymaps and layout info
* update copyright headers
I mean... if someone's gotta "own" this code...
* fix broken factory_* keymaps
* Add Z70Ultra which is a Hotsawp RGB 65% keyboard
* Update keyboards/melgeek/z70ultra/z70ultra.h
Co-authored-by: Ryan <fauxpark@gmail.com>
* Update keyboards/melgeek/z70ultra/keymaps/default/keymap.c
Co-authored-by: Ryan <fauxpark@gmail.com>
* Update keyboards/melgeek/z70ultra/keymaps/via/keymap.c
Co-authored-by: Ryan <fauxpark@gmail.com>
* Update keyboards/melgeek/z70ultra/z70ultra.c
Co-authored-by: Ryan <fauxpark@gmail.com>
* Update keyboards/melgeek/z70ultra/readme.md
Co-authored-by: Ryan <fauxpark@gmail.com>
* Update keyboards/melgeek/z70ultra/rev1/rules.mk
Co-authored-by: Ryan <fauxpark@gmail.com>
* Update keyboards/melgeek/z70ultra/z70ultra.c
Co-authored-by: Ryan <fauxpark@gmail.com>
* Update keyboards/melgeek/z70ultra/z70ultra.c
Co-authored-by: Ryan <fauxpark@gmail.com>
* Update keyboards/melgeek/z70ultra/z70ultra.c
Co-authored-by: Ryan <fauxpark@gmail.com>
* Update keyboards/melgeek/z70ultra/z70ultra.h
Co-authored-by: Ryan <fauxpark@gmail.com>
* Update readme.md
* Update info.json
update the name of layout to consistent the keyboard.
* Update keyboards/melgeek/z70ultra/z70ultra.c
Co-authored-by: Ryan <fauxpark@gmail.com>
* Update keyboards/melgeek/z70ultra/z70ultra.c
Co-authored-by: Ryan <fauxpark@gmail.com>
* Update keyboards/melgeek/z70ultra/info.json
Co-authored-by: Ryan <fauxpark@gmail.com>
* Update keyboards/melgeek/z70ultra/keymaps/default/keymap.c
Co-authored-by: Ryan <fauxpark@gmail.com>
* Update keyboards/melgeek/z70ultra/keymaps/via/keymap.c
Co-authored-by: Ryan <fauxpark@gmail.com>
* Add Z70Ultra
* Support Z70Ultra
[Modified] info.json to support two different layouts
[Add] rules.mk to support default folder
* Update keyboards/melgeek/z70ultra/rev1/rules.mk
Co-authored-by: Ryan <fauxpark@gmail.com>
* Update keyboards/melgeek/z70ultra/config.h
Co-authored-by: Ryan <fauxpark@gmail.com>
* remove excessive arguments from LAYOUT_split_space
* Update keyboards/melgeek/z70ultra/info.json
Co-authored-by: James Young <18669334+noroadsleft@users.noreply.github.com>
* Update keyboards/melgeek/z70ultra/info.json
Co-authored-by: James Young <18669334+noroadsleft@users.noreply.github.com>
* Update keyboards/melgeek/z70ultra/keymaps/default/keymap.c
Co-authored-by: James Young <18669334+noroadsleft@users.noreply.github.com>
* Update keyboards/melgeek/z70ultra/z70ultra.h
Co-authored-by: James Young <18669334+noroadsleft@users.noreply.github.com>
* Update keyboards/melgeek/z70ultra/z70ultra.h
Co-authored-by: James Young <18669334+noroadsleft@users.noreply.github.com>
* Update keyboards/melgeek/z70ultra/keymaps/via/keymap.c
Co-authored-by: James Young <18669334+noroadsleft@users.noreply.github.com>
* Update keyboards/melgeek/z70ultra/keymaps/default/keymap.c
Co-authored-by: James Young <18669334+noroadsleft@users.noreply.github.com>
* Update keyboards/melgeek/z70ultra/rev1/rules.mk
Co-authored-by: James Young <18669334+noroadsleft@users.noreply.github.com>
* Update keyboards/melgeek/z70ultra/keymaps/via/keymap.c
Co-authored-by: James Young <18669334+noroadsleft@users.noreply.github.com>
* Update keyboards/melgeek/z70ultra/keymaps/default/keymap.c
Co-authored-by: James Young <18669334+noroadsleft@users.noreply.github.com>
* Update keyboards/melgeek/z70ultra/keymaps/via/keymap.c
Co-authored-by: James Young <18669334+noroadsleft@users.noreply.github.com>
* Update keyboards/melgeek/z70ultra/keymaps/via/keymap.c
Co-authored-by: James Young <18669334+noroadsleft@users.noreply.github.com>
* Use macro replace with the literal for CS & SW
* Update keyboards/melgeek/z70ultra/z70ultra.c
Co-authored-by: Drashna Jaelre <drashna@live.com>
* [Keyboard] Support MJ61 which is a 60% ANSI STD Hotswap RGB keyboard
* Update keyboards/melgeek/mj61/mj61.c
Co-authored-by: Drashna Jaelre <drashna@live.com>
* Update keyboards/melgeek/mj61/mj61.c
Co-authored-by: Drashna Jaelre <drashna@live.com>
* [Keyboard] MJ61 Add license header for files and the link for readme
* Update keyboards/melgeek/mj61/readme.md
Co-authored-by: Ryan <fauxpark@gmail.com>
* Update keyboards/melgeek/mj61/rev1/config.h
Co-authored-by: Ryan <fauxpark@gmail.com>
* Update keyboards/melgeek/mj61/rev1/rules.mk
Co-authored-by: Ryan <fauxpark@gmail.com>
* Update keyboards/melgeek/mj61/mj61.c
Co-authored-by: Ryan <fauxpark@gmail.com>
* Update keyboards/melgeek/mj61/mj61.c
Co-authored-by: Ryan <fauxpark@gmail.com>
* Add GPL for files
* Update keymaps/default/keymap.c
* Update keymaps/via/keymap.c
* Update keyboards/melgeek/z70ultra/z70ultra.c
Co-authored-by: Drashna Jaelre <drashna@live.com>
* Update keyboards/melgeek/z70ultra/z70ultra.c
Co-authored-by: Drashna Jaelre <drashna@live.com>
Co-authored-by: Ryan <fauxpark@gmail.com>
Co-authored-by: James Young <18669334+noroadsleft@users.noreply.github.com>
Co-authored-by: Drashna Jaelre <drashna@live.com>
* Add VIA code to ergoTravel, VendorId changed to allow via
* Update LTO_ENABLE for via
* Accept comments from the QMK PR discussion
* Restore original rules.mk from qmk master, update via rules to remove redundant bootmagic
* rules update
* find and use unique VID without qmk. Used 0x4A50, did not find clash
* Removed unused via layer
* Reset hard to last clean commit, redo changes for Hex Translation and Enum
* on behalf of VashtaNerada commiting his code to get caps lock led working on the soldered E8d E8.5
* Update keyboards/exclusive/e85/soldered/soldered.c
Co-authored-by: Joel Challis <git@zvecr.com>
Co-authored-by: Joel Challis <git@zvecr.com>
* Add VIA keymap for EVE Meteor.
* Remove bootmagic flag and add vendor/product IDs.
* Update keyboards/eve/meteor/info.json
Co-authored-by: Ryan <fauxpark@gmail.com>
* Increment EVE Vendor ID to be unique.
* Change product IDs.
Make the EVE Meteor IDs both unique and somewhat logical based on the product name.
Co-authored-by: Ryan <fauxpark@gmail.com>
Co-authored-by: Ryan <fauxpark@gmail.com>
* Add VID/PIDs to ErgoDox EZ
* Add VID/PIDs for Planck EZ and Glow revision
* Make names consistent
* fix typo in docs
* Move LED config back, for maximum compatibility
* Add revisions for ErgoDox EZ boards
* Fix embarassing typo
* Typooooo
Co-authored-by: Nick Brassel <nick@tzarc.org>
* Update Licensing info
* Update Moonlander default keymap to match Oryx's default
* Fix formatting based on suggestions
Co-authored-by: James Young <18669334+noroadsleft@users.noreply.github.com>
* Make indicator LEDs more configurable
* Update default keymap
* Handle older eeprom settings
Co-authored-by: Nick Brassel <nick@tzarc.org>
Co-authored-by: James Young <18669334+noroadsleft@users.noreply.github.com>
* [Keyboard] Support MJ61 which is a 60% ANSI STD Hotswap RGB keyboard
* Update keyboards/melgeek/mj61/mj61.c
Co-authored-by: Drashna Jaelre <drashna@live.com>
* Update keyboards/melgeek/mj61/mj61.c
Co-authored-by: Drashna Jaelre <drashna@live.com>
* [Keyboard] MJ61 Add license header for files and the link for readme
* Update keyboards/melgeek/mj61/readme.md
Co-authored-by: Ryan <fauxpark@gmail.com>
* Update keyboards/melgeek/mj61/rev1/config.h
Co-authored-by: Ryan <fauxpark@gmail.com>
* Update keyboards/melgeek/mj61/rev1/rules.mk
Co-authored-by: Ryan <fauxpark@gmail.com>
* Update keyboards/melgeek/mj61/mj61.c
Co-authored-by: Ryan <fauxpark@gmail.com>
* Update keyboards/melgeek/mj61/mj61.c
Co-authored-by: Ryan <fauxpark@gmail.com>
* [Keyboard] Support MJ63 which is a 60% hotswap RGB keyboard with arrows
and the size of left shift is 2U
* Update keyboards/melgeek/mj63/mj63.h
Co-authored-by: James Young <18669334+noroadsleft@users.noreply.github.com>
* Update keyboards/melgeek/mj63/keymaps/default/keymap.c
Co-authored-by: James Young <18669334+noroadsleft@users.noreply.github.com>
* Update keyboards/melgeek/mj63/keymaps/via/keymap.c
Co-authored-by: James Young <18669334+noroadsleft@users.noreply.github.com>
* Update keyboards/melgeek/mj63/keymaps/via/keymap.c
Co-authored-by: James Young <18669334+noroadsleft@users.noreply.github.com>
* Update keyboards/melgeek/mj63/rev1/rules.mk
Co-authored-by: James Young <18669334+noroadsleft@users.noreply.github.com>
* Update keyboards/melgeek/mj63/keymaps/via/keymap.c
Co-authored-by: James Young <18669334+noroadsleft@users.noreply.github.com>
* Update keyboards/melgeek/mj63/info.json
Co-authored-by: James Young <18669334+noroadsleft@users.noreply.github.com>
* Update keyboards/melgeek/mj63/keymaps/default/keymap.c
Co-authored-by: James Young <18669334+noroadsleft@users.noreply.github.com>
* Update keyboards/melgeek/mj63/keymaps/via/keymap.c
Co-authored-by: James Young <18669334+noroadsleft@users.noreply.github.com>
* Update keyboards/melgeek/mj63/keymaps/default/keymap.c
Co-authored-by: James Young <18669334+noroadsleft@users.noreply.github.com>
* Update keyboards/melgeek/mj63/mj63.c
Co-authored-by: Joel Challis <git@zvecr.com>
* [Keyboard] MelGeek MJ63
* Change the VID and PID
* move the mj63.c to the rev1/rev1.c
Co-authored-by: Drashna Jaelre <drashna@live.com>
Co-authored-by: Ryan <fauxpark@gmail.com>
Co-authored-by: James Young <18669334+noroadsleft@users.noreply.github.com>
Co-authored-by: Joel Challis <git@zvecr.com>
* Initial support for the Keyboardio Atreus
Many thanks to noroadsleft for reviews & suggestions.
* Add QMK Configurator layout support
* Update the fn layer of the Keyboardio Atreus to the new layout.
Previously this was using the Classic Atreus layout.
* Implement noroadleft's changes from #8492
* Follow Erovia's recommendations
qmk/qmk_firmware#8492
* Correct braces
* Change correct rules.mk
* Remove comments
* Fix BOOTMAGIC_ENABLE
I had edited the wrong file earlier.
* Remove comment
* Updates rules.mk
Thank you noroadsleft.
Co-authored-by: Gergely Nagy <algernon@keyboard.io>
Co-authored-by: Phil Hagelberg <phil@hagelb.org>
* Move existing files out the way
* Convert to community layouts
* Add smk65/revf support
* Disable stuff by default
* Update IDs for via
* Align LAYOUT macros for community layouts
* Align LAYOUT macros for community layouts - Fix configurator ordering
* Update via keymap
* remove stub _kb function
* Apply suggestions from code review
Co-authored-by: Ryan <fauxpark@gmail.com>
Co-authored-by: Ryan <fauxpark@gmail.com>
* Add niu mini dye sub keymap
* Fix spacing
* Fix for blank spacing on layout
* Remove unused code
Co-authored-by: Joel Challis <git@zvecr.com>
* Remove audio and console settings
Co-authored-by: Joel Challis <git@zvecr.com>
* Updates rules and readme
* Add license GPL2 to keymap
Co-authored-by: Joel Challis <git@zvecr.com>
* Clean LeftyNumpad code
* Fix typo in recently renamed file
* Fix issues with keymap layout
* Initial PR Feedback fixes
* Update keyboards/handwired/leftynumpad/config.h
Co-authored-by: Joel Challis <git@zvecr.com>
* Update keyboards/handwired/leftynumpad/config.h
Co-authored-by: Joel Challis <git@zvecr.com>
* Apply suggestions from code review
Co-authored-by: Joel Challis <git@zvecr.com>
* Apply suggestions from code review
Co-authored-by: James Young <18669334+noroadsleft@users.noreply.github.com>
Co-authored-by: Ryan <fauxpark@gmail.com>
* Add fixes based on PR feedback
* Update keyboards/handwired/leftynumpad/readme.md
Co-authored-by: Ryan <fauxpark@gmail.com>
Co-authored-by: Joel Challis <git@zvecr.com>
Co-authored-by: James Young <18669334+noroadsleft@users.noreply.github.com>
Co-authored-by: Ryan <fauxpark@gmail.com>
* add maja capslock indicator
add maja capslock indicator
* Update keyboards/kbdfans/maja/maja.c
Co-authored-by: Ryan <fauxpark@gmail.com>
Co-authored-by: Ryan <fauxpark@gmail.com>
* Basic keymap parsing finally works
* Add 'keymap.json' creation to the qmk.keymap module
* Add tests and fix formatting
* Fix/exclude flake8 errors
* Convert keymap.c to valid keymap.json
* Fix some errors
* Add tests
* Finalize keymap.json creation, add json template
* Add docs
* Move pygments to the standard requirements
* Add support for nameless layers, fix tests
* Fix things after rebase
* Add missing 'keymap' value.
* Fix missing layer numbers from advanced keycodes
Buckwich noticed that if the advanced keycode / layer toggling key
contains a number, it goes missing.
Now we properly handle them.
Thx for noticing!
* Apply suggestions from code review
* fixup tests
Co-authored-by: Zach White <skullydazed@drpepper.org>
Co-authored-by: skullY <skullydazed@gmail.com>
* Move my custom functions and keymaps to userspace to be able to add the STM32F411 variant of my keyboard with mostly the same functionality
* Move keymaps to community layouts
* Remove keymaps from userspace readme.md
Co-authored-by: Janos Daniel Reibl <janos.daniel.reibl@protonmail.com>
* add support for ymd75 rev3
* Update keyboards/ymd75/rev3/rules.mk
Co-authored-by: Ryan <fauxpark@gmail.com>
* Update keyboards/ymd75/rev3/rules.mk
Co-authored-by: Ryan <fauxpark@gmail.com>
* remove DESCRIPTION
* only apply offset for rev3
Co-authored-by: Ryan <fauxpark@gmail.com>
* Created folder structure and blank files
* Update the yugo_m initial blank files
* Add yugo_m default keymap
* Update yugo_m info.json
* Fix yugo_m keymap.c
* keymap.c update
* Changed subfolder name
* File names
* Fixed lock LEDs problem
* Returned old subfolder name; LEDs fix
* Activated anti-ghosting feature in config.h
* Update readme.md
* Changed LAYOUT to LAYOUT_all
* Updated keymap.c
* corrected LAYOUT to LAYOUT_all in info.json
* Rewritten readme.md according to the template
* Removed backslashes from keymap.c
* Fixed readme.md
* Fixed readme.md again
* Tidying up readme.md
* Tidying up comments and readme.md
* Removed a line from rules.mk
* Update keyboards/yugo_m/model_m_101/model_m_101.h
Co-authored-by: Joel Challis <git@zvecr.com>
* Removed chconf, halconf, mcuconf
* Updated LED control
* Update keyboards/yugo_m/model_m_101/rules.mk
Co-authored-by: Joel Challis <git@zvecr.com>
* Update keyboards/yugo_m/model_m_101/config.h
Co-authored-by: Joel Challis <git@zvecr.com>
* Update keyboards/yugo_m/model_m_101/config.h
Co-authored-by: James Young <18669334+noroadsleft@users.noreply.github.com>
* Update keyboards/yugo_m/model_m_101/config.h
Co-authored-by: James Young <18669334+noroadsleft@users.noreply.github.com>
* Update keyboards/yugo_m/model_m_101/model_m_101.c
Co-authored-by: James Young <18669334+noroadsleft@users.noreply.github.com>
* Update keyboards/yugo_m/readme.md
Co-authored-by: James Young <18669334+noroadsleft@users.noreply.github.com>
* Updated readme.md, there was an outdated info
* Update keyboards/yugo_m/model_m_101/keymaps/default/keymap.c
Co-authored-by: Ryan <fauxpark@gmail.com>
* Update keyboards/yugo_m/model_m_101/keymaps/default/keymap.c
Co-authored-by: Ryan <fauxpark@gmail.com>
* Update keyboards/yugo_m/model_m_101/model_m_101.c
Co-authored-by: Ryan <fauxpark@gmail.com>
* Update keyboards/yugo_m/model_m_101/model_m_101.c
Co-authored-by: Joel Challis <git@zvecr.com>
Co-authored-by: Nidzo Tomic <tomicn8@hotmail.com>
Co-authored-by: Joel Challis <git@zvecr.com>
Co-authored-by: James Young <18669334+noroadsleft@users.noreply.github.com>
Co-authored-by: Ryan <fauxpark@gmail.com>
* First pass at manuform layout.
* Updates from actual usage on my board. Fixed a couple of bugs, added a stormlight quote randomizer.
* Use a 32-bit timer that can actually hit 5 minutes.
* Some updates after a day of usage:
* Turn off WPM. It's too inaccurate and takes up a decent amount of space that can be devoted to quotes.
* Turn off the OLEDs after 5 minutes
* Move the keys around a bit.
* Add many more quotes.
* Adjust the quotes to make room for missing and misswritten WoT quote. Adjusted the keymap slightly. Adjust the mods display to include one_shots.
* Revert osm on lgui as it makes start menu search impossible to use.
* Use LTO_ENABLE flag.
* License all of my (333fred's) keymaps as MIT.
* Update users/333fred/rgb.c
Co-authored-by: Ryan <fauxpark@gmail.com>
Co-authored-by: Ryan <fauxpark@gmail.com>
* Initializing Boardwalk layout
* rules.mk newline
* config.h newline
* qwerty num toggle -> tap-toggle
* errant K, and _LOWER momentary toggles
* Lack of autosave sucks
* Converting to HHKB layout
* TT(_NUM) added to num layer
* Final updates for Boardwalk initialization
* Final refinements
* newline
* Removal of extra includes
* Update keyboards/boardwalk/keymaps/niclake/config.h
#pragma once
* Removing comment block from rules
* Updates to my layout
* WIP working on new keymap
* tweaking keymap
* updated keymap
* cleaned up a little bit
* New preonic keymap
* my preonic keymap
* added mac layout
* preonic map update
* cleaning up old repo
* cleaning up to match upstream
* more cleanup
* removing old keymaps
* Added BM60 Poker
* Apply suggestions from code review
* Added license
* updated license
* updated license
* Fixed remaining licenses and added layout to rules
* added replacement pcb for the matrix cain keyboard
* update usb descriptor
* fixed led polarity
* Update keyboards/matrix/cain/cain.c
Co-authored-by: Joel Challis <git@zvecr.com>
* Update keyboards/matrix/cain/rules.mk
Co-authored-by: Ryan <fauxpark@gmail.com>
* Apply suggestions from code review
Co-authored-by: James Young <18669334+noroadsleft@users.noreply.github.com>
* rename from cain to cain_re
* Update keyboards/matrix/cain_re/readme.md
Co-authored-by: James Young <18669334+noroadsleft@users.noreply.github.com>
Co-authored-by: Joel Challis <git@zvecr.com>
Co-authored-by: Ryan <fauxpark@gmail.com>
Co-authored-by: James Young <18669334+noroadsleft@users.noreply.github.com>
* BM60RGB ISO: fix and extend default keymap
- correctly assigns the Non-US Backslash and Hash keys
- adds Function and Navigation keys
- use KC_GESC instead of KC_ESC to make Grave accent available
* Update layout macro
The layout is the ISO equivalent of QMK's `LAYOUT_60_ansi_arrow`.
* Add via configurator support
* Remove layers to fix via
* Re-add extra via layers since it seems to work now
* Replace tabs with spaces
* Update readme.md
* first pass at fixing the key labeling
* second pass of fixing key labeling
* third pass of this key naming
* another pass of changing key naming
* another pass
* another pass
* another pass
* renamed it all
* give a good vid and pid
* add via keymap
* add on to the comments
* update readme and comments
* one more small change
Co-authored-by: James Young <18669334+noroadsleft@users.noreply.github.com>
Co-authored-by: Danny <nooges@users.noreply.github.com>
Co-authored-by: Adam Gwilliam <agwilliam@yaharasoftware.com>
* Convert ErgoDox EZ to lite matrix
* Add initial config from Dactyl config
Based on ErinCall's work to generalize the mcp i/o expander matrix code
* formatting
* Fix number of pins
* Remove unused defines
* fixed keymap placement
- online configurator keys were in the wrong location and needed to be fixed
- fixed a key being to high on the y position
* Create rules.mk
* Create keymap.c
* Update rules.mk
added VIA support
* Changed wazowski via keymap to include skipped switch
* changed the vendor ID
* Update keyboards/keebzdotnet/wazowski/config.h
* Removed VIA enable from keyboard rules.mk
* Update keyboards/keebzdotnet/wazowski/rules.mk
* Fixed wazowski via keymap build errors
* Added multi-layer support for Wazowski via keymap
* Initial Commit for Ploopyco Trackball
This is a WIP at this point. Most of it compiles, but the SPI commands are non-functioning as they come from Arduino, so don't exist in LUFA
* Convert SPI commands from arduino to LUFA
But I have no idea if this is actually correct or not
* Update keyboard readme
* Clean up ploopyco trackball
* Update readme
* Update mouse key stuff
* last minutue cleanup
* Add caveat about scroll wheel
* Fixup to code
* Additional fixup
* Add movement multiplier
* Rename folders
* mid changes
* temp
* Got it working!!!!!
* Additional cleanup of code
* Make unused pin calls more compact
* Rotation info
* Add debouncing checks
* Make everything replaceable
* Add info.json
* Include ISP flashing info
* Better handling for user customization
* Reconfigure CPI stuff
* fix issues with debug printing
* Fix tiny scroll issue
* Add and update scroll code from ploopy mouse
* Update licensing
* Add PloopyCo Mouse
* Cleanup and layout stuff
* Move common files to main folder for reuse
* Increase polling rate
* Update image for mouse
* Apply changes from code review
* Add VIA support
* edit vid and pid
* add VIA keymap
* add my name to the readme
* Update keyboards/gray_studio/hb85/keymaps/via/config.h
* we have a third endpoint, no need to disable mousekeys
* Update keyboards/gray_studio/hb85/keymaps/via/keymap.c
* add license header
* Create keymap.c
* Add files via upload
* Added files for handwired 3d printed clueboard 660
* create via layout files
* added layout files for via
* updated product ID to fix id conflicts
* change product ID to fix ID conflicts.
* fixed capitalization error that was causing issues
* fixed capitalization issues.
* fix syntax errors
* Fixed syntax errors (stray punctuation)
* Compatibility fixes
* Compatibility fixes
* Compatibility fixes
* Compatibility fixes
* capitalization fixes
* Compatibility fixes
* Compatibility fixes
* Compatibility Fixes
* Compatibility fixes
* Compatibility fixes
* Compatibility changes
* upkeep, fixing typos
* Update keyboards/handwired/3dp660/config.h
Removed Description line
* Update keyboards/handwired/3dp660/rules.mk
correct bootloader
* Update keyboards/handwired/3dp660/3dp660.h
fix case sensitive typos
* Update keyboards/handwired/3dp660/keymaps/default/keymap.c
change tab indentation to space indentations.
* Update keyboards/handwired/3dp660/keymaps/via/keymap.c
change tab indentations to space indentations
* Delete 3dp660.json
This file was for VIA, and shouldn't be in this repo. I placed it here so I wouldn't misplace it in my filesystem. My apologies.
* Update info.json
change suggestions to other file said to lowercase "ansi", caused reference issues, changed all instances of "ANSI" to "ansi".
* Update keymap.c
change suggestions to other file said to lowercase "ansi", caused reference issues, changed all instances of "ANSI" to "ansi".
* Update keymap.c
more capitalization fixes
* Update keyboards/handwired/3dp660/readme.md
shortened imgur url
* Update keyboards/handwired/3dp660/rules.mk
remove extraneous comments
* Delete config.h
* Update keyboards/handwired/3dp660/rules.mk
* Update 3dp660.c
add license headers to all .c and .h files
* Update 3dp660.h
added license header to all .c and .h files.
* Update keymap.c
added license header to all .c and .h files.
* Update keymap.c
added license header to all .c and .h files.
* Update keyboards/handwired/3dp660/readme.md
Add maintainer URL
* Update keyboards/handwired/3dp660/keymaps/default/keymap.c
remove extraneous default keymap layers
* Update keyboards/handwired/3dp660/keymaps/default/rules.mk
* Update rules.mk
Moved LTO to keyboard level.
* Update rules.mk
Moved LTO to keyboard level.
* Delete rules.mk
Made obsolete by LTO move to keyboard level.
* Update keyboards/handwired/3dp660/rules.mk
capitalization errors.
* Apply suggestions from code review
Housekeeping, changing code for readability.
Adding my kbd67mkii keymap and some changes to kumo
Keymaps for kbdfans/kbd67/mkii_soldered and thevankeyboards/minivan
* Changes to minivan layout
* KBD67 keymap
* commiting my files
* Squashing commits - adding preonic keymap
This adds a custom keymap, including numpad layer, emoji, and kamoji
key mappings.
* Removing unnecessary trailing backslash characters
* removing the unnecessary json keymap
* removing unnecessary trailing slashes from the default keymap
* switching to tap_code
* Apply suggestions from code review
This should enable a toggleable numpad
* adding license
* Stripping out FN keycodes in favor of a momentary layer
Fix configs to make the `handwired/onekey/blackpill_f401:backlight` and
`handwired/onekey/blackpill_f411:backlight` examples actually compile
and work:
- Use `PWMD5` instead of `PWMD2` for backlight, which matches the
default value of `BACKLIGHT_PAL_MODE` (AF02 for pin A0 is `TIM5_CH1`)
and does not conflict with the default value of `STM32_ST_USE_TIMER`.
- Enable `HAL_USE_PWM` in halconf.h and `STM32_PWM_USE_TIM5` in
mcuconf.h, so that `PWMD5` could be used.
* add miniMACRO5
add all nessecary files for the miniMACRO5
I have rewritten the readme, and changed the keymaps to be more simple. I have tested compiling, and everything works perfectly.
* update miniMACRO5 readme
add the make example into the readme file
* Update keyboards/minimacro5/config.h
Co-authored-by: Ryan <fauxpark@gmail.com>
* Update keyboards/minimacro5/keymaps/default/keymap.c
Co-authored-by: Ryan <fauxpark@gmail.com>
* Update keyboards/minimacro5/keymaps/media/keymap.c
Co-authored-by: Ryan <fauxpark@gmail.com>
* Update keyboards/minimacro5/keymaps/media/keymap.c
Co-authored-by: Ryan <fauxpark@gmail.com>
* Update keyboards/minimacro5/minimacro5.c
Co-authored-by: Ryan <fauxpark@gmail.com>
* Update keyboards/minimacro5/info.json
Co-authored-by: Ryan <fauxpark@gmail.com>
* Apply suggestions from code review
applied all suggestions.
Co-authored-by: Ryan <fauxpark@gmail.com>
* drashna suggestions - enum rather than define
committed enum update by drashna
Co-authored-by: Drashna Jaelre <drashna@live.com>
* update keymap.c
incorrect brackets
Co-authored-by: dezli <m@dez.li>
Co-authored-by: Ryan <fauxpark@gmail.com>
Co-authored-by: Drashna Jaelre <drashna@live.com>
* Adding preonic layout
* deleting unnecessary files
* Fixing spacing
* I need to not commit things while I'm not sober
* Update keyboards/preonic/keymaps/codecoffeecode/keymap.c
* Update keyboards/preonic/keymaps/codecoffeecode/keymap.c
* Update keyboards/preonic/keymaps/codecoffeecode/keymap.c
* Adding license header
The default keymaps don't make use of the global `keymap_config`
variable nor the `matrix_*_user()` functions. Therefore, remove them to
avoid confusion for future keymap authors.
* update "Hardware Availability"
* add a section of "How to build"
* update "Hardware Supported"
* add VIA keymaps
* add 2 layers to VIA keymaps
Co-authored-by: keyaki-namiki <28521374+keyaki-namiki@users.noreply.github.com>
There is no way to invoke the command feature while having just a single
physical key, and disabling that feature fixes build for keymaps like
`handwired/onekey/promicro:rgb` without resorting to LTO (the command
feature consumes more than 4900 bytes with avr-gcc 8.4.0).
* KBD67 MkII Soldered: Fix ISO blocker layout
Matrix data was wrong; KC_NUHS key did not work.
* KBD67 MkII Soldered: Add ISO blocker with Split Backspace layout
* Add Torn keyboard
* Apply suggestions from code review
Co-authored-by: Nick Brassel <nick@tzarc.org>
* Remove via json file
* Add mcp23081_pin_t
* Apply suggestions from code review
Co-authored-by: James Young <18669334+noroadsleft@users.noreply.github.com>
* Apply suggestions from code review
Co-authored-by: James Young <18669334+noroadsleft@users.noreply.github.com>
* Apply suggestions from code review
Co-authored-by: Drashna Jaelre <drashna@live.com>
* Apply suggestions from code review
Co-authored-by: Ryan <fauxpark@gmail.com>
Co-authored-by: Richard Titmuss <richardt@spotify.com>
Co-authored-by: Nick Brassel <nick@tzarc.org>
Co-authored-by: James Young <18669334+noroadsleft@users.noreply.github.com>
Co-authored-by: Drashna Jaelre <drashna@live.com>
Co-authored-by: Ryan <fauxpark@gmail.com>
* Adds pagondel layout for dz65rgb v2
* Adds license information
* replaces define by enums
* Update license year
Co-authored-by: James Young <18669334+noroadsleft@users.noreply.github.com>
Co-authored-by: James Young <18669334+noroadsleft@users.noreply.github.com>
* Update config.h
adding vendor and product info so VIA will recognize it.
* Update keyboards/kingly_keys/romac_plus/config.h
thank you for this. commiting suggestion.
Co-authored-by: Ryan <fauxpark@gmail.com>
Co-authored-by: Ryan <fauxpark@gmail.com>
* 6.25U bottom row ISO layout for Matrix Noah
* Personal map for Matrix Noah using new 6.25U bottom row ISO
* Switch to 65_iso_blocker and add that to info.json
* Switch to 65_iso_blocker for the new layout
* Fix whitespace issues
* Meridian initial commit
* requested changes
* Update keyboards/primekb/meridian/config.h
Co-authored-by: Ryan <fauxpark@gmail.com>
* Update keyboards/primekb/meridian/rules.mk
Co-authored-by: Ryan <fauxpark@gmail.com>
* made requested changes
* Update meridian.c
* Update keyboards/primekb/meridian/readme.md
Co-authored-by: James Young <18669334+noroadsleft@users.noreply.github.com>
Co-authored-by: Ryan <fauxpark@gmail.com>
Co-authored-by: James Young <18669334+noroadsleft@users.noreply.github.com>
* initial keymap commit
* Keymap for coppertop commit
* removed define for layers/kc_no/kc_trns
* Modified keymap to remove definitions and add layer enum
* initial keymap commit
* Keymap for coppertop commit
* removed define for layers/kc_no/kc_trns
* Modified keymap to remove definitions and add layer enum
* Changed KC_NO and KC_TRNS to 7X and 7_
* Fixed spacing on keymaps
* TMO50: use layer_state_set_kb at keyboard level (#10150)
* Change TMO to use layer_state_set_kb as is customary at the keyboard level.
This also factors out `process_indicator_led` to a separate method.
* [Keymap] update dz60:mrsendyyk (#10160)
Update DZ60 Personal readme.md and keymap.c
* Update readme.md
* Update keymap.c
* Update keymap.c
* Update readme.md
* Update readme.md
* Update readme.md
* Update keymap.c
* Update readme.md
* Update
* Update readme.md
* Update keymap.c
* Update readme.md
* [Keyboard] YMDK NP21 refactor (#10181)
* [Keyboard] 1upkeyboards/1up60rgb: fix broken Enter (#10188)
The recent change to unnest macros put the enter on the wrong matrix key. On the 1uprgb, the ANSI and ISO enters share the same cell as does the ANSI and ISO backslash.
* no idea what this is
* Update keyboards/dz60/keymaps/coppertop/keymap.c
* Update keyboards/dz60/keymaps/coppertop/keymap.c
* Update keyboards/dz60/keymaps/coppertop/keymap.c
* Update keyboards/dz60/keymaps/spotpuff/keymap.c
* Update keyboards/dz60/keymaps/spotpuff/keymap.c
* Update keyboards/dz60/keymaps/spotpuff/keymap.c
* Added Trns labels to keymap comments.
* Revert "no idea what this is"
This reverts commit dd950f9eb3bad365961d2aa6c97c9dfbdd6219db.
* Reverted dd950f9eb3bad365961d2aa6c97c9dfbdd6219db
* fix vusb submodule
* Update keyboards/dz60/keymaps/coppertop/rules.mk
* Update keyboards/dz60/keymaps/spotpuff/rules.mk
* Update users/spotpuff/rules.mk
* Added GNU copyright license text
* [Keyboard] Convert Corne Keyboard to Split Common
* Add VIA Support
* Makes sure that ol(e)d and new OLED implementation can't coexist
* Add licensing header to files
* Add changes based on feedback from foostan
* Fixes
* add via support for boardsource/5x12
* make product id for 5x12 unique (there is already an 0x0512) by setting it to 0x5012
* un-swap the readme's for 3x4 and 5x12
* Update keyboards/boardsource/5x12/config.h
update vendor id
* Update keyboards/boardsource/5x12/keymaps/via/keymap.c
use correct number of layers for VIA
* update product id to use same pattern as others
* Update keyboards/boardsource/5x12/keymaps/via/readme.md
* Update keyboards/boardsource/5x12/keymaps/via/readme.md
* Hub16 AutoHotKey Companion
* Revised after PR comments by Drashna
* Update keyboards/hub16/keymaps/ahk_companion/readme.md
Co-authored-by: James Young <18669334+noroadsleft@users.noreply.github.com>
* Update keyboards/hub16/keymaps/ahk_companion/readme.md
Co-authored-by: James Young <18669334+noroadsleft@users.noreply.github.com>
* Update keyboards/hub16/keymaps/ahk_companion/readme.md
Co-authored-by: James Young <18669334+noroadsleft@users.noreply.github.com>
* Update keyboards/hub16/keymaps/ahk_companion/readme.md
Co-authored-by: James Young <18669334+noroadsleft@users.noreply.github.com>
* Update keyboards/hub16/keymaps/ahk_companion/readme.md
Co-authored-by: James Young <18669334+noroadsleft@users.noreply.github.com>
* Update keyboards/hub16/keymaps/ahk_companion/keymap.c
Co-authored-by: Drashna Jaelre <drashna@live.com>
Co-authored-by: James Young <18669334+noroadsleft@users.noreply.github.com>
Co-authored-by: Drashna Jaelre <drashna@live.com>
* setup keyboard
* fit v1 board setting
* remove unused def and add ergodox_pretty
* add user hooks
* add ergodox_pretty to info
* apply suggestions
* use default split usb timeout
* added via keymap
* replaced PRODUCT_ID 0x1157 with PRODUCT_ID 0x2157
replaced product id to distinguish rev2 from rev1.
bakingpy gave me permission through discord chat.
* Update keyboards/keebio/viterbi/keymaps/via/keymap.c
* Update keyboards/keebio/viterbi/keymaps/via/rules.mk
* made a simplier keymap.c for via folder
Based from the default keymap, removed unnecessary codes.
* Add via keymap for Plaid-Pad
- Add VIA support for the Plaid-Pad
- Changes Vendor ID and Product ID (to follow VIA's guidelines)
* Add extra encoder pads for rev1.1
* Change Product Id from pp to PP (hex value)
* improved readme
- detailed informations about rotary encoder, bootloader and firmware
* Improved encoder informations in via keymap
* Improved encoder infos and code in default keymap
* add revision folder for rev1 and rev1.1
* change encoder assignment for defaul a via keymap
* Update keyboards/keycapsss/plaid_pad/config.h
* change revision number
* Update keyboards/keycapsss/plaid_pad/rules.mk
* Update keyboards/keycapsss/plaid_pad/rules.mk
* Update keyboards/keycapsss/plaid_pad/rules.mk
* Update keyboards/keycapsss/plaid_pad/rules.mk
* Update keyboards/keycapsss/plaid_pad/readme.md
* add license to header of *.h and *.c files
* remove the list of alternate bootloaders
- due to the pr checklist
* Update keyboards/keycapsss/plaid_pad/rules.mk
* added SQUARE.X keyboard from the iNETT Studio
* split to two sub directories
* Apply suggestions from code review
* Update keyboards/inett_studio/sqx/universal/universal.h
* Apply suggestions from code review
* update the matrix control keycodes settings
* use the offical macro to the rgb matrix control
* fixed led position issue
* Apply suggestions from code review
* removed the redundant #endif
* update default keymap
* Apply suggestions from code review
* add license header
* Add VIA support for lazydesigners\bolt
Add VIA support for lazydesigners\bolt
* Update keyboards/lazydesigners/bolt/via/rules.mk
Co-authored-by: Ryan <fauxpark@gmail.com>
Co-authored-by: Ryan <fauxpark@gmail.com>
* chore: pulled the latest from master
Bring my redox layout from my latest redox branch
Bring my latest user stuff from my redox branch
* Update users/danielo515/config.h
Co-authored-by: Drashna Jaelre <drashna@live.com>
* chore: small cleanup
Co-authored-by: Drashna Jaelre <drashna@live.com>
* Adding VIA support for sixkeyboard
* Update keyboards/sixkeyboard/keymaps/via/keymap.c
* Update keyboards/sixkeyboard/keymaps/via/keymap.c
* Update keyboards/sixkeyboard/keymaps/via/keymap.c
* Update keyboards/sixkeyboard/keymaps/via/keymap.c
* Update keymap.c
added suggested header. left my name out and changed year to 2020.
* split up the e85 into hotswap and soldered variants
* remove layout_all LAYOUT macro for hotswap pcb
* add copyright header to to all config files
* remove list of alternate bootloaders
* spruce up config file
* comply with PR check list
* Update keyboards/exclusive/e85/hotswap/info.json
* Update keyboards/exclusive/e85/hotswap/info.json
* Update keyboards/exclusive/e85/hotswap/info.json
* Update keyboards/exclusive/e85/rules.mk
* Update keyboards/exclusive/e85/config.h
* Update keyboards/exclusive/e85/hotswap/config.h
* Update keyboards/exclusive/e85/soldered/config.h
* remove LAYOUT_all in hotswap and also remove superfluous comments
* remove the soldered tsangan map
* replaced #define PRODUCT_ID 0x1157 with #define PRODUCT_ID 0x2157
replaced product id to distinguish rev2 from rev1.
bakingpy gave me permission through discord chat.
The recent change to unnest macros put the enter on the wrong matrix key. On the 1uprgb, the ANSI and ISO enters share the same cell as does the ANSI and ISO backslash.
* K-Type refactor
* Declare QMK in product name again
* Hopefully fix matrix scanning
* Maybe this time
* Partial (literally) RGB Matrix support
* Put RGB_MATRIX_ENABLE into rgb keymap for now
* Add ifdefs for RGB config
* Set layer 1 to actually be layer 1...
* Update keyboards/k_type/readme.md
* Put all RGB config in keymap for now
* Set SDB high?
* Before `rgb_matrix_init()` would be best
* User level, not keyboard
* Combating dropped keys
* Nope
* Readme for RGB keymap
* Remove custom matrix
* Better handle LTO_ENABLE
Especially when calling from command line
* Replace LINK_TIME_OPTIMIZATION_ENABLE with LTO_ENABLE
* Remove long for LTO from show_options.mk
* Add support for hsv->rgb conversion without using CIE curve.
* Modify anavi/macropad8 to disable unicode (was unused), otherwise firmware size is too large.
* Consolidate TKC projects and increase VIA keymap count to 4.
* Updated readme files.
* Removed config.h via limitation of 2 dynamic keymaps
* Reduce dynamic keymaps from 4 to 3 due to EEPROM space limitations.
* Update dynamic_keymap.c
* Restore 4 dynamic keymaps for VIA in TKC projects.
* Update quantum/dynamic_keymap.c
* add support for hid gamepad interface
add documentation for HID joystick
Add joystick_task to read analog axes values even when no key is pressed or release. update doc
Update docs/feature_joystick.md
Manage pin setup and read to maintain matrix scan after analog read
* Incorporates patches and changes to HID reporting
There are some patches provided by @a-chol incorporated on this commit,
and also some changes I made to the HID Report structure.
The most interesting is the one dealing with number of buttons: Linux
doesn't seem to care, but Windows requires the HID structure to be byte
aligned (that's in the spec). So if one declares 8/16/32... buttons they
should not have any issues, but this is what happens when you have 9
buttons:
```
bits |0|1|2|3|4|5|6|7|
|*|*|*|*|*|*|*|*| axis 0 (report size 8)
|*|*|*|*|*|*|*|*| ...
|*|*|*|*|*|*|*|*|
|*|*|*|*|*|*|*|*|
|*|*|*|*|*|*|*|*|
|*|*|*|*|*|*|*|*|
|*|*|*|*|*|*|*|*| axis 6
|*|*|*|*|*|*|*|*| first 8 buttons (report size 1)
|*| | | | | | | | last of 9 buttons, not aligned
```
So for that I added a conditonal that will add a number of reports with
size 1 to make sure it aligns to the next multiple of 8. Those reports
send dummy inputs that don't do anything aside from aligning the data.
Tested on Linux, Windows 10 and Street Fighter (where the joystick is
recognized as direct-input)
* Add save and restore of each pin used in reading joystick (AVR).
Allow output pin to be JS_VIRTUAL_AXIS if the axis is connected to Vcc
instead of an output pin from the MCU.
Fix joystick report id
Fix broken v-usb hid joystick interface. Make it more resilient to unusual settings (none multiple of eight button count, 0 buttons or 0 axes)
Correct adc reading for multiple axes. Piecewise range conversion for uncentered raw value range. Input, output and ground pin configuration per axis.
Documentation fixes
* Fix port addressing for joystick analog read
* The other required set of changes
As per the PR, the changes still holding it up.
Add onekey for testing.
Fix ARM builds.
Fix device descriptor when either axes or buttons is zero.
Add compile-time check for at least one axis or button.
Move definition to try to fix conflict.
PR review comments.
qmk cformat
* avoid float functions to compute range mapping for axis adc reading
* Remove V-USB support for now. Updated docs accordingly.
* Update tmk_core/protocol/lufa/lufa.c
Co-Authored-By: Ryan <fauxpark@gmail.com>
* Update tmk_core/protocol/usb_descriptor.c
Co-Authored-By: Ryan <fauxpark@gmail.com>
* Update tmk_core/protocol/usb_descriptor.c
Co-Authored-By: Ryan <fauxpark@gmail.com>
* Update tmk_core/protocol/usb_descriptor.c
Co-Authored-By: Ryan <fauxpark@gmail.com>
* Add support for joystick adc reading for stm32 MCUs. Fix joystick hid report sending for chibios
* Fix HID joystick report sending for ChibiOS.
Add one analog axis to the onekey:joystick keymap.
Fix pin state save and restore during joystick analog read for STM32
MCUs.
* Update tmk_core/protocol/chibios/usb_main.c
Co-Authored-By: Ryan <fauxpark@gmail.com>
* Update tmk_core/protocol/lufa/lufa.c
Co-Authored-By: Ryan <fauxpark@gmail.com>
* Add missing mcuconf.h and halconf.h to onekey:joystick keymap.
Add suggested fixes from PR.
* Switch saveState and restoreState signature to use pin_t type.
onekey:joystick : add a second axis, virtual and programmatically animated.
* Update docs/feature_joystick.md
Co-Authored-By: Ryan <fauxpark@gmail.com>
* Update docs/feature_joystick.md
Co-Authored-By: Ryan <fauxpark@gmail.com>
* Add PR corrections
* Remove halconf.h and mcuconf.h from onekey keymaps
* Change ADC_PIN to A0
Co-authored-by: achol <allecooll@hotmail.com>
Co-authored-by: José Júnior <jose.junior@gmail.com>
Co-authored-by: a-chol <achol@notamail.com>
Co-authored-by: Nick Brassel <nick@tzarc.org>
Co-authored-by: Ryan <fauxpark@gmail.com>
* Update Space Cadet to use Custom Tapping Term functionality
* Detect correct keycode for space cadet tapping term
* Update tap dancing to use global custom tapping term
* Update documentation for Tap Dances
* formatting pass
* Apply suggestions from code review
Co-Authored-By: fauxpark <fauxpark@gmail.com>
* Update docs/feature_tap_dance.md
Co-authored-by: James Young <18669334+noroadsleft@users.noreply.github.com>
* Update for future
* Update user keymaps for space cadet
* Fix typos
* Clean up tapping term stuff
* Fix compiler issue if NO_ACTION_TAPPING is enabled
Co-authored-by: fauxpark <fauxpark@gmail.com>
Co-authored-by: James Young <18669334+noroadsleft@users.noreply.github.com>
* Initial work for consolidation of board files and default ChibiOS configs.
* Migrate F401/F411 black pills for testing.
* Add early init bootloader jump flag.
* Add support for I2C in order to use i2c_scanner keymap.
* Add F401/F411 HSE bypass to get things booting.
* Exempt "hooked" ChibiOS conf files from updater script.
* Fix up ordering for bootloader_defs file check.
* Match previous $(KEYBOARD_PATHS) value for Proton-C, updated for all board configs.
* Add a compiling layout based on minidox
* Add the correct pins
* Add old for science code
* Update to 2020 standards
* Get the keymap working
* update config
* Update pinout
* Fix pins
* Make requested changes
* Add info.json for configurator
* for science - PR comments
* Apply suggestions from code review
* setup handwired pteron38
* Clean up readme
* readme follow template
* c formatting conventions
* remove file size comments from rules.mk
* use direct link to imgur image
* Apply suggestions from code review
* add license
* kbd67/mkiirgb - allow disabling rgb matrix
wrap rgb matrix funs in defines
* kbd67mkiirgb - changes per review
remove kb funcs that just call the user version. what's left is all rgb
matrix stuff so we can just wrap the whole file.
* Initial prep for PR
* Fixing jsons for revs
* Remove old keymap ref in readme
* Add Rev1 default layout
* Fix extra comma in default r1 keymap
* Changed default keymap for r1 to match new split bottom row macro name, updated via keymap readme, updated r1 json to match layout macro name, updated split space macro for r1
* Moved combo configs to default keymaps, removed unused bootloader selections
* Update keyboards/underscore33/rev1/rules.mk
* Update keyboards/underscore33/rev2/rules.mk
* Refactor _33 folder structure
* Add VIA keymap to rev1
* Rename macros and product_id as suggested
* add support for ModelM USB board
* EMI improvement: remove unnecessary toggling of MOSI pin
* address review comments
* Update keyboards/mschwingen/modelm/rules.mk
Co-authored-by: James Young <18669334+noroadsleft@users.noreply.github.com>
* Update keyboards/mschwingen/modelm/rules.mk
Co-authored-by: James Young <18669334+noroadsleft@users.noreply.github.com>
* Update keyboards/mschwingen/modelm/config.h
Co-authored-by: James Young <18669334+noroadsleft@users.noreply.github.com>
* Update keyboards/mschwingen/modelm/config.h
Co-authored-by: James Young <18669334+noroadsleft@users.noreply.github.com>
* Update keyboards/mschwingen/modelm/rules.mk
Co-authored-by: Drashna Jaelre <drashna@live.com>
* Update keyboards/mschwingen/modelm/keymaps/default/keymap.c
Co-authored-by: Drashna Jaelre <drashna@live.com>
* update printf usage
* add comment
* EMI improvement: remove unnecessary toggling of MOSI signal
* remove trailing space
* use shorter macros as suggested in review by noroadsleft, re-format table to line up columns
* Update keyboards/mschwingen/modelm/config.h
Co-authored-by: Ryan <fauxpark@gmail.com>
* Update keyboards/mschwingen/modelm/rules.mk
Co-authored-by: Ryan <fauxpark@gmail.com>
* Update keyboards/mschwingen/modelm/rules.mk
Co-authored-by: Ryan <fauxpark@gmail.com>
* Update keyboards/mschwingen/modelm/rules.mk
Co-authored-by: Ryan <fauxpark@gmail.com>
* Update keyboards/mschwingen/modelm/README.md
Co-authored-by: Ryan <fauxpark@gmail.com>
* Update keyboards/mschwingen/modelm/README.md
Co-authored-by: Ryan <fauxpark@gmail.com>
* Apply suggestions from code review
use spi_read from core insteads of our own copy
Co-authored-by: Ryan <fauxpark@gmail.com>
* include spi_master.c to use spi_read()
* Update keyboards/mschwingen/modelm/README.md
Co-authored-by: James Young <18669334+noroadsleft@users.noreply.github.com>
* Apply suggestions from code review: correct indenting in keymap
Co-authored-by: James Young <18669334+noroadsleft@users.noreply.github.com>
* Apply suggestions from code review
use automatic variant defines from makefile instead of defining our own
Co-authored-by: Drashna Jaelre <drashna@live.com>
* Update keyboards/mschwingen/modelm/rules.mk: use QUANTUM_LIB_SRC for uart.c
Co-authored-by: Drashna Jaelre <drashna@live.com>
Co-authored-by: Michael Schwingen <michael@schwingen.org>
Co-authored-by: James Young <18669334+noroadsleft@users.noreply.github.com>
Co-authored-by: Drashna Jaelre <drashna@live.com>
Co-authored-by: Ryan <fauxpark@gmail.com>
* added matrix 8xv2.0 additional keyboard
* Apply suggestions from code review
Co-authored-by: James Young <18669334+noroadsleft@users.noreply.github.com>
* add copyright and speed up the matrix scanning
* Update keyboards/matrix/m20add/rules.mk
Co-authored-by: Drashna Jaelre <drashna@live.com>
Co-authored-by: James Young <18669334+noroadsleft@users.noreply.github.com>
Co-authored-by: Drashna Jaelre <drashna@live.com>
* added nemui layout
* via support working
* added license headers for c and h files
* Update keyboards/nemui/keymaps/via/rules.mk
* Update keyboards/nemui/nemui.c
* Update keyboards/nemui/config.h
* Update keyboards/nemui/readme.md
* Update keyboards/nemui/rules.mk
* removed nemui.json as it was supposed to only be in via repo
* Update keyboards/nemui/keymaps/default/keymap.c
* Update keyboards/nemui/info.json
* Update keyboards/nemui/info.json
* Update keyboards/nemui/keymaps/via/keymap.c
* Update keyboards/nemui/keymaps/via/keymap.c
* first iteration of my keymap
* * move to userspace
* "script" modes
* keymap bling
* OM and RUPA keys
and tryin to micro-optimize in process_records.c
* woops
swap shifted rupas
forgot to add codepoint for OM
* Apply suggestions from code review
Co-authored-by: Drashna Jaelre <drashna@live.com>
* add call to process_record_keymap, per review
* fall through to process_record_keymap
* license headers
Co-authored-by: Drashna Jaelre <drashna@live.com>
* add in drewguy's code with a few additions to the keymap
* add VID and PID
* fixup defualt keymap
* add VIA keymap
* thanks to bigchimpo for reminding me to put an Fn key in the default keymap
* make sure we have the right gitugithub url for drew
* remove description as per PR checklist
* append readme with more information
* Update keyboards/holyswitch/southpaw75/config.h
* Update keyboards/holyswitch/southpaw75/info.json
* Update keyboards/holyswitch/southpaw75/southpaw75.h
* Update keyboards/holyswitch/southpaw75/info.json
* [kbdfans] Added dbroqua layout for kbd6x
Add dbroqua keymap for kbd6x
Add dbroqua layout for kbd6x with HHKB style and RGB.
* Update keymap.c
* Change based on zvecr
* Added RESET button
