* initial commit of budget96
* non logic changes
* add my name to readme
* update matrix.c
* make the matrix representation of the layout macro
* fix up LAYOUT macro
* add missing character
* initial keymap commit
* put KC_NO where they belong
* basic keymap
* fix matrix row and col definition
* The diagram I was sent and the pins used I was sent were in opposite order from each other. This should fix the issues
* update the readme
* change up manufacturer for budget96
* update copyright date
* fix up the switch matrix and provide a keymap
* forgot the keymap
* other matrix fixes
* missing a few keys in the switch matrix
* messed up the row tracing
* tweak keymap a bit
* use a lower case k
* fix spacing for markdown rendering
* put in the reset key documentation
* clean up the file a little
* use LAYOUT_96_ansi
* add a second layer for lighting controls
* add in lighting support
* add QMK Configurator support
* use pragma once
* remove un needed matrix.c
* convert to GPIO methods
* turn on rgblight_enable and get rid of custom matrix
* set bootloadhid_bootloader to 1
* set bootmagic to lite and set it to k50
* add reset information to readme
* use i2c_master instead of custom i2c
* restore the custom i2c code
* introduce reset key and eep_rst in function layer 1
* fix up pip3 install commands
* fix up device and manufacturer names
* remove un needed comments
* add an ALL layout macro along with QMK Configurator support
* move budget96 into donutcables directory since he actually has different boards
* add a short donut cables blurb taken from his website
* update readme for make instructions to point to the new path
* Update keyboards/donutcables/budget96/config.h
Co-Authored-By: mechmerlin <30334081+mechmerlin@users.noreply.github.com>
* Update keyboards/donutcables/budget96/readme.md
Co-Authored-By: mechmerlin <30334081+mechmerlin@users.noreply.github.com>
* Update keyboards/donutcables/budget96/info.json
Co-Authored-By: mechmerlin <30334081+mechmerlin@users.noreply.github.com>
* turn on backlight
* Update keyboards/donutcables/budget96/readme.md
Co-Authored-By: mechmerlin <30334081+mechmerlin@users.noreply.github.com>
* remove extra UART and BOOTLOADER settings that are not needed
* Added first configuration for handwired hacked motosped keyboard
* Added first keymap
* Fixed h file key layout
* Swapped Y and Z in default keymap
* Added name, email and description
* Moved hacked motospeed keyboard to handwired
* Changed make command in readme
* Formatted readme to be displayed properly with markdown
* Formatted keymap and layout to better reflect the physical keyboard
* Fixed info.json
* Update keyboards/handwired/hacked_motospeed/info.json
Co-Authored-By: Deckweiss <Deckweiss75@gmail.com>
* Removed .directory from .gitignore
Co-Authored-By: Deckweiss <Deckweiss75@gmail.com>
* Minor changes and cleanup
* Update keyboards/handwired/hacked_motospeed/hacked_motospeed.h
Added back newline needed for properly parsing
Co-Authored-By: Deckweiss <Deckweiss75@gmail.com>
* Adding new keymap folder for goadmaster
* add switch break
* zeal60 rgb backlight files
* modified for red caps lock key
* Remove return statement
* Files removed
* Add new RGB options
* Back to original file
* Keyboard: add treeadstone48
* rename layout defines
* Use of pragma once
* move common include code
* fixed info.json
* change keymap layout from kc to normal
* fix alpha revision keymap
* fixed info.json
* remove USE_Link_Time_Optimization
* Initial portover of the doro68.json with corrected column pins.
* Initial setup of LAYOUT_ansi and it's use in the default keymap.
* Added F keys to default kemap on layer 1.
* Added split space (and everything else) layout and a base keymap to be updated.
* Renamed split_space to multi.
* Changed product_id for doro.
* Created a basic doro LAYOUT_iso and default keymap.
* Copied over basic layout and keymap.
* Added readme.md for doro67 multi.
* Removed basic keyboad layout and keymap because it's a separate PCB.
* Added backlight controls to the various keymaps.
* Added explicit backlight pin define.
* Increased number of backlight levels for flexibility.
* Removed unnecessary line slashes and unified keymcaps.
* Corrected ISO layout and switched position with multi.
* Added keymap readme.md files.
* Corrected ISO keymap.
* Added Layouts to info.json for toolbox.
* Re-added slashes as they were necessary here...
* Corrected info.json/keymap discreptancies.
* Updated copyright messages (and fixed small readme error).
* Added missing line break spaces in readme.md
Co-Authored-By: ShadeDream <nick@shadedream.com>
* Keymap alignments on default_multi readme.md
Co-Authored-By: ShadeDream <nick@shadedream.com>
* Keymap alignments on default_multi readme.md
Co-Authored-By: ShadeDream <nick@shadedream.com>
* Keymap alignments on default_multi readme.md
Co-Authored-By: ShadeDream <nick@shadedream.com>
* Small alignment adjustment on the default keymap readme.md
Co-Authored-By: ShadeDream <nick@shadedream.com>
* use pragma once where applicable
* remove ?
* update default keymap readme
* remove un need include
* update readme with newbs guide
* set underglow and backlight to be on by default, and explicitly set them to no for the default keymap to handle the non Polestar case.
* put mine and benlyall's name in the code
* update readme
* port Massdrop CTRL/ALT to use RGB Matrix
Co-authored-by: Matt Schneeberger <helluvamatt@gmail.com>
* Massdrop lighting support working
This commit is to get the Massdrop lighting code working again through use of the compilation define USE_MASSDROP_CONFIGURATOR added to a keymap's rules.mk.
Added keymaps for both CTRL and ALT named default_md and mac_md. These should be used if the Massdrop style lighting is desired.
* Updating config based on testing results with patrickmt & compile errors
* Updates for PR5328
For CTRL and ALT:
Moved location of new RGB Matrix macros from config_led.h to config.h.
Added RGB_MATRIX_LED_FLUSH_LIMIT (time between flushes) to config.h for correct LED driver update timing.
Re-added missing breathing code for when Massdrop configurator mode is defined.
* remove prilik keymap form PR
* Implemented Eager Per Row debouncing algorithm.
Good for when fingers can only press one row at a time (e.g. when keyboard is wired so that "rows" are vertical)
* Added documentation for eager_pr
* Ported ergodox_ez to eager_pr debouncing.
* Removed check for changes in matrix_scan.
* Added further clarification in docs.
* Accidental merge with ergodox_ez
* Small cleanup in eager_pr
* Forgot to debounce_init - this would probably cause seg-faults.
* first [ass at pulling out common duck library functions
* use new library in jetfire
* use new library in duck lightsaver
* use new library in octagon v2
* put Device into the library
* refactor send_value
* refactor send_value and send_color
* use pragma once
* use pragma once
* use pragma once
* use pragma once
* rename backlight_led to indicator_leds to match with other duck boards
* rename enum
* make #define names consistent
* rename ducklib to duck_led
* update rules.mk ?= to =
* put rgb in the correct order
* add debounce debugging printouts
* turn on bootmagic lite and set it to the top left most key commonly programmed as Escape
* add reset key documentation
* fix that typo
* Update keyboards/duck/duck_led/duck_led.c
Co-Authored-By: mechmerlin <30334081+mechmerlin@users.noreply.github.com>
* include the correct library
* initial commit
* get rid of some of the vanilla cookie cutter code
* Put in the matrix size and the pins
* add LAYOUT macro and a suitable keymap
* Add QMK Configurator support
* set bootmagic to lite
* put a RESET key into the default keymap
* edit kyuu readme file for description and quantrik.com link
* Update keyboards/quantrik/kyuu/config.h
Co-Authored-By: mechmerlin <30334081+mechmerlin@users.noreply.github.com>
* fix captilization of keyboard name
* fix keymap wrapping issue and add MO key
* preserve RESET key location
* use one of the macros
* RGB Matrix overhaul
Breakout of animations to separate files
Integration of optimized int based math lib
Overhaul of rgb_matrix.c and animations for performance
* Updating effect function api for future extensions
* Combined the keypresses || keyreleases define checks into a single define so I stop forgetting it where necessary
* Moving define RGB_MATRIX_KEYREACTIVE_ENABLED earlier in the include chain
* Add tennie
* Jacobs Functions
* Switch back to normal layout
* Remove define from old template
* Fix broken keymaps
* Correct style errors, add bootlite
* Update readmes. Rename test keymap
* Missed comma
* Switch rgb from init to post init
* Updated iris, planck, and xd75 keymaps
* Added brightness down and up to commented layout of Symbol layer.
* updated config files for planck and iris
* removed unnecessary include lines from iris and planck config files
* updated XD75's PC layer and its NAVPC toggle layer
* fixed typo in alias declaration for C_BSPS
* changed alias names for BSPC toggle keys
* Updated iris, planck, and xd75 keymaps
* Added brightness down and up to commented layout of Symbol layer.
* updated config files for planck and iris
* removed unnecessary include lines from iris and planck config files
* Fixed typo of 'confid.h' to 'config.h'
* Fixed broken links in docs
* Fixed a lot of dead links
* Removed all dead links that I could not find a replacement for
* Placed knops links back in
* Fixed plank keymaps so that they will compile for planck light
* Https doesn't work on knops.io
* tv44:budi now compiles
* s60_x:amnesia0287 now compiles
* Fixed allocation of key_combos so that narze keymap for planck can compile correctly
* Disabled rgb on ergodone and infinity
* Enabled tap dance so it compiles
* Added return statement so it compiles
* If compiling on light disable extra functionality
* Properly redefined variable so it compiles
* Remove remaining dead links
* Create custom Planck Light keycap
See README for details
* Link to WhatPulse in README
* More remapping, and add RGB LED effects
* Remove dead code, address PR feedback from @drashna
* Add macro for “screenshot region to clipboard” hotkey for macOS
Also remove unused layer / key logic
* Remove extraneous comment
* Incorporate PR feedback from @drashna.
Update README with new mapping.
* Add keycodes for new macros to keymaps
* add macros for commonly used shortcuts
* FIx macro code and add comments
* Replaced with build in QMK keycodes
* Removed macros that duplicated QMK keycodes
* The code in this directory supports the KBD65
* Update readme.md
* Update readme.md
* Clear up the confusion between the kbd67/kbd65 naming.
* Update keyboards/kbdfans/kbd67/readme.md
Co-Authored-By: Hackerpilot <briancschott@gmail.com>
* initial commit of e6v2 bmc files
* update readme with bmc template and reset key location
* fix up the switch matrix
* add usbconfig.h file
* add i2c files
* cleanup config.h
* cleanup rules.mk and remove non atmega32a architecture code
* add an appropriate keymap for testing
* update readme with warning not to flash this hex file onto atmega32u4 e6v2
* get rgb lights working
* add QMK Configurator support for 60_ansi layout
* add hhkb support layout
* add additional layouts such as tsangan and all and included QMK Configurator support for them
* add bootmagic lite, and have it be set to Esc or the key located at k50
* update readme
* fixup spacing for LAYOUT_all electrical matrix
* add some pragma once magic
* use i2c_master instead of custom i2c.c
* remove the custom i2c.c
* restore a more valid default keymap
* add eep_rst to keymap
* Add kwer keymap and RGB mod description to cypher
* Add custom led_set_user to keymap
* Remove unneccessary include path from keyboards/westfoxtrot/cypher/keymaps/kwer/keymap.c
Co-Authored-By: kwerdenker <sebastian.spindler@gmail.com>
This PR is cherry-pick from 90b9a1aa7d8a in PR #5020.
@MxBlu copied quantum/rgblight.c to keyboards/mxss/rgblight.c on July 8, 2018. At that time, I think it would be better to copy quantum/rgblight.h at the same time.
Because if someone makes a change to `quantum/rgblight.[ch]` that is incompatible with the past, it may cause problems with the compilation of keyboards/mxss.
(Like when I changed the prototype of the `rgblight_effect_XXX()` functions of rgblight.c in PR #5020.)
* copy default over as starting point
* Getting rid of dvorak and colemak for now, added a couple changes to the
keymap
* removed refs to bad layers, formatting comments
* First version of my ergodox ported layout!
* Symbols layer, media layer, updated comments
* Hyper as a single key
* Fix stuck hyper key when switching layers
* Tweak some annoying things about the layout.
- move raise left and promote alt
- remove swap keys on the last layer
- reorganize media keys so they're easier to reach and more intuitive
- fix some comment template things
* Add readme for rjhilgefort planck layout
* readme tweak
* PR feedback changes
* Add support for wiring RGB LEDs for both halves directly to their respective controllers
RGB LEDs for each half don't need to be chained together across the TRRS cable with this
* Add split RGB LED support for serial
* Update config/rules for bakingpy layout
* Un-nest ifdefs for hand detection
* Read RGB config state from memory instead of EEPROM for serial updates
* Reuse existing LED pointer instead of creating new one
* Create custom Planck Light keycap
See README for details
* Link to WhatPulse in README
* More remapping, and add RGB LED effects
* Remove dead code, address PR feedback from drashna
* Adding new tap dance key
* Adding new tap dance code
* add code for copy/paste to tap dance
* testing tap dance enums
* New tap dance keycodes
* Fix enums
* handwired/magicforce61: refactor
Renamed layout macro KEYMAP to LAYOUT.
Keymap now uses #include QMK_KEYBOARD_H.
Refactored the default keymap to use non-auto-prepended keycodes per QMK standard.
Deleted deprecated action_get_macro block (was unused).
* handwired/magicforce61: Configurator support
* handwired/magicforce61: readme cleanup
Restructured the readme to be more similar to current QMK template.
* handwired/magicforce61: replace missing image in readme
Replaced the missing wiring image (error 404) with a table.
* handwired/magicforce61: rename readme to lowercase
* Convert config.h to #pragma once include guard
* introduce stt layout with K(row)(col)
* set bootmagic to lite
* Rename the original LAYOUT to LAYOUT_all
Introduce the STT layout
In additional the whole matrix was changed to support the K(row)(col) notation.
* rename LAYOUT to LAYOUT_all
* add QMK Configurator support
* stt keymap based on mrpetrov's default configuration on the hb85 he lent me
* update readme
* introduce basic and aop layouts along with QMK Configurator support for them
* add a new line
* add EEP_RST to layer 1 as it is needed to get rgb underglow to work
* add documentation on how to reset the eeprom on the board
* put contributors names where appropriate
* added Boy_.314's layout for halfnhalf keyboard
* reset rules.mk to default
* update keymap with qwerty layout, and enable tap dancing
* fixed formatting in layout visualization
* added rules.mk to custom layout
* added mod tap for ctrl/capslock
* fixed typo in config.h, remove excess in rules.mk, revert half_n_half rules.mk
* added Boy_.314's layout for halfnhalf keyboard
* reset rules.mk to default
* update keymap with qwerty layout, and enable tap dancing
* fixed typo in config.h, remove excess in rules.mk, revert half_n_half rules.mk
* added macros to raise layer
* fixed mismatched layout/comments
* fixed layout switching
* Remove unnecessary IS_COMMAND definition from clueboard/66_hotswap/gen1
* Remove old-style IS_COMMAND definition comment from dozen0
* Use get_mods() instead of keyboard_report->mods in georgi
* keymap + alpha
* some fixes
* keymap + alpha
* some fixes
* drashna changes
* linked main Alpha repo in keyboards/alpha readme
* missed a spot
* there's another function called FUNC lol
* keymap + alpha
* some fixes
* keymap + alpha
* drashna changes
* Fixed include
* Revert "Fixed include"
This reverts commit ea92f261f86d8433eab313cde498adca1682a006.
* messed up my git, fixed include
* starting work on TMO50 layout
* Update keyboards/tmo50/keymaps/default/keymap.c
Co-Authored-By: PyrooL <lm11887@gmail.com>
* Updated PyroL's TMO50 keymap
* Added task manager/Ctrl Alt Del that i stole from the eco keymap
* Clean up task manager and ctrl alt del macros
Co-Authored-By: PyrooL <lm11887@gmail.com>
* initial commit
* initial commit
* fixed indents
* spelling, capitalization, and order.
* added dota mode keymap, removed old comments
* fixed default keymap always having tilde, instead of grave accent and tilde. Improved dota keymap.
* lower does not change backspace to delete anymore
* corrected pgup/pgdown
* changed period on lower from numpad dot to regular dot
* added colemak and dvorak
* made colemak/dvorak border keys consistent with querty
* updated to match current practices, added custom metakeys for dvorak and colemak
* added disclaimer about audio
* renamed to lowercase
* replaced include guards with #pragma once
Co-Authored-By: rileyweber13 <rileyw13@protonmail.com>
* removed unncessary include
Co-Authored-By: rileyweber13 <rileyw13@protonmail.com>
* removed defines included in core
Co-Authored-By: rileyweber13 <rileyw13@protonmail.com>
* replace defines with an enum, switched from custom function to set_single_persistent_default_layer
* removed ifndef/include/endif left over from previous build system
* removed unnecessary ifdef block
* updated soungs to work with set_single_persistent_default_layer
* Instant 60
* Instant60 changes again
* turn off LSE and features
* Working RGB underglow 🎉
* Add missing files
* Update keymap to have reset
* Backlighting on
* Backlight code for instant60
* Move 072 files to common folder and use it in Instant60
* Updates
* Update keyboards/cannonkeys/instant60/rules.mk
Co-Authored-By: awkannan <andrew.kannan@klaviyo.com>
* add SCREEN_NAV layer for copy/pasting within screen
* working readreg/paste macros
* working read reg / paste macros
* write log and tran patterns, and expand
* add ls -la shortcut, add tab on combined layer
* put delete word on the right pinky key on shell_nav layer
* add TAB on the right side, add reset key
* added Cloud9 macros
* add cloud9 shortcuts to atreus layout
* added BROWSER_CONTROL layer
* finalized browser control layer
* adding comment
* add browser control layer to atreus
* add flashing command line
* remove the tab on combined layer
* remove the tomouse
* remove mouse layer, change log/tran expand patterns, cleanups
* add dumptlog macro
* add "delete to home" shortcut
* fix conflict
* remove unneeded mouse layer
* add meh shortcuts on the browser_control layer
* add/modify some macros
* explain the various layers
* putty paste is right mouse button
* add android studio shortcuts
* allow switching between base and alternate base layouts
* replace cloud9 shortcuts with android studio
* more android studio shortcuts
* add two meh shortcuts on keynav layer
* additional android studio shortcut
* added defines for android studio
* Updated layout after some months of testing.
The current setup looks quite better than the initial one. It's not
perfect but it allows me to work quite well.
The only big problem is the Alt modifiers on the home row which
sometimes break the typing if keys are pressed too fast. I'm also not
satisfied by the TAB key position on the thumb cluster.
Main improvements since previous push:
- Shift layouts on both halves
- Moved around symbols
- Improved number/fn keys
- Reorganized thumbs
* Used enum as suggested by @drashna :-)
* Corrected column count and adjusted layouts to include missing key
The original version reflected 14 columns and omitted KC_GRV, the 15th key on the top row. This revision adds support for the 15h key, and also updates the default (Tsangan) layout to include the HHKB layer keys.
* Reverted config.h to version in master branch
* Moved K413 to the correct location
* Added info.json
* Update keyboards/1upkeyboards/1up60hte/1up60hte.h
Co-Authored-By: newbold <adam@neatnik.net>
* Update keyboards/1upkeyboards/1up60hte/info.json
Co-Authored-By: newbold <adam@neatnik.net>
* Update keyboards/1upkeyboards/1up60hte/keymaps/default/keymap.c
Co-Authored-By: newbold <adam@neatnik.net>
* Update keyboards/1upkeyboards/1up60hte/keymaps/hhkb/keymap.c
Co-Authored-By: newbold <adam@neatnik.net>
* Update keyboards/1upkeyboards/1up60hte/keymaps/hhkb/keymap.c
Co-Authored-By: newbold <adam@neatnik.net>
* Update keyboards/1upkeyboards/1up60hte/keymaps/default/keymap.c
Co-Authored-By: newbold <adam@neatnik.net>
* fresh commit for a new fork for PR to upstream/master
* gaming mode added, lighting changes for other modes
* rules.mk fixed...
* fixed collision issue with aesthetic and shifty modes
* fixed collision issue with aesthetic and shifty modes
* troubleshooting game mode failing
* moved game tapdance key to default layer, fixed issue
* added my own keymap
* changed thing
* updated keymap Samuel
* updated laypout for better one handed use
* updated stuff I want
* happy with my lagout
* formatting
* Added new literate config
* made everything nice
* cleaned
* fixed spelling and two small bugs in macros
* Made press and lift function for modifiers
* made taps occur on press instead of release
* added oneshot keys and chars cant be negative!
* removed debug message
* Added command and qwerty layers
* fixed bug with oneshot layer
* same bug, different key
* Add nrichers keymap
* Additional keymap tweaks, add readme info
* Improve descriptions for changes from default keymap
* Add image of keymap, update .gitignore to
* Add image link
Adds an image of the modified keymap.
* Improve legibility of keymap changes with colour coding
* Tinker with color codes in Markdown
* Experiment with colour codes
* Tinker more with colour codes
* Figured out the easiest way to include colour coding
* Undo earlier .gitignore change
* Refactor layout macro names
Update the names of the layout macros to reflect QMK's desired usage.
- KEYMAP renamed to LAYOUT
- colinta keymap updated accordingly
- KC_KEYMAP renamed to LAYOUT_kc
- mtdjr keymap updated accordingly
* Update xd75.h to use #pragma once include guard
* Update keymaps to use QMK_KEYBOARD_H
* Refactor default keymap
- updated to use layout macro
- remove deprecated action_get_macro function
- add functions from QMK keymap.c template
- process_record_user
- matrix_init_user
- matrix_scan_user
- led_set_user
* Update supporting files
- updated config.h files to use #pragma once include guard
- remove errant QUANTUM_DIR code block
* Rename readme files to fully lowercase filenames
* Restructure keyboard readme
Updated the readme to better align with the current QMK template.
* Bugfixes to supporting files
* greenshadowmaker keymap for idobo xd75 massdrop
* remove uneeded config.h
* corrected format to match convention instead of xd75 where I accidentally started from
* Use correct functions for dip switch code
* Some planck cleanup
* Hopefully fix RGB Sleeping with RGB Matrix
* Add rgbmatrix extern
* Add numpad 5x6 layout
* RGB Tweaks
* Add RGB startup animation
* Minor RGB Fixes
* Turn off RBG on planck
* Enable separate storage of EEPROM
* Update Macro pad
* Add BJohnson Keymap and minor darshna tweaks
* Clean up rgb and other code for new numpad
* Remove clicky hachy thing
* Update my code to use built in MOD_MASK defines
* Fix up modifier calls
* Tweak to KC_MAKE
* Tweak to KC_MAKE
* Add Semi-colon to numpad
* Preprocess out rgb matrix stuff if not enabled
* Formatting of KC_MAKE
* Add stuff for matrix and light rgb coexistance
* Fix bad spelling
* Change where layer indication shows based on rgblight status
* Force set mods in KC_MAKE
* Optimize CRKBD
* added Boy_.314's layout for halfnhalf keyboard
* reset rules.mk to default
* update keymap with qwerty layout, and enable tap dancing
* fixed formatting in layout visualization
* added rules.mk to custom layout
* added mod tap for ctrl/capslock
* fixed typo in config.h, remove excess in rules.mk, revert half_n_half rules.mk
Added keymap for 60% board 1up60rgb. The map provides VIM-style navigation on a
second layer (L1) with HOME, PGDN, PGUP, and END keys on that same layer one
row below the home row. The layout is used by https://github.com/michaeldye.
* Add satisfaction75 revision 1
* Update manufacturer
* Add tester layout and update rev1 comments
* Add ifdef guards for OLED for tester
* Add oled disabling rules
* Update to save backlight settings and setup for VIA custom config
* Add new VIA values to satisfaction75
* Safety guard in clock set mode
* Fix mistaken doc edit
* Address PR comments
* bring the default back to pass travis CI
* Address further PR comments
* 412_64 move to handwired
412_64 and its second printing, Mark Zero Stand Aside, are now obsolesced by new hardware. As only two units exist in the wild not owned by me, I'm moving the definition to handwired.
* Mark 3 Stand Aside ready for production.
Uploading firmware, compiled and tested, for Mark 3 Stand Aside. The hardware's ready, now the software is too.
* Whoops.
Should've branched before pushing Stand Aside. Sorry 'bout that.
* Revert "Whoops."
This reverts commit d222046cfe6183ed0c42286ec9ebb5034a5d1009.
* Revert "Mark 3 Stand Aside ready for production."
This reverts commit c790899af7a6d92855aebe6a96003f1fe9be66b3.
* Mark 3 Stand Aside ready.
Initial commit for Mark 3 Stand Aside, ready for production.
* Update keyboards/standaside/rules.mk
noroadsleft suggested removal of a line, 'LAYOUTS = ortho_4x16'. I agree.
Co-Authored-By: FateEverywhere <41215461+FateEverywhere@users.noreply.github.com>
* Cleanup for pull request.
Making changes requested by Drashna, as they're all good, and I know way less about the standards than they do.
* Initial cleanup completion.
Missed a few lines in standaside.c, they're cleaned up now.
* Update info.json
Adding layout for the macro version.
* Update info.json
Changed the macro layout to match exactly like the non-macro version (split backspace and bottow row match)
* added my launchpad
* updated keymap with legends and fixed layout errors
* Added default keymap with added layer for RGB controls and included the necessary config code
* fixed layer orders
* removed my personal keymap to clean PR
* missed an underscore
* updated readme
* removed more unnecessary code
* moved RGB code to its own config phone
* moved underglow info to its own readme
* removed redundant code from default_rgb config.h file, included QMK KEYBOARD H in place of initial defines in keymap.c
* reverted launchpad config
* removing the = because I can't figure out why its there
* Revert "removing the = because I can't figure out why its there"
This reverts commit e3b5e6d568e7225635844ba617aaef4f77727ce6.
* reverted rev1/config.h
* reverted all files I should not have touched
* removing redundant code in rules.mk
* readibility improvements to keymap
* Add ISO backslash key position to matrix and keymap files
* Use KC_NO instead of KC_BSLS for unused position in custom keymap
* Add new key position to json layout file used by online configurator
* Get things working except indicators
* Attempt to get things working
* hmm
* Compiles but doesn't run
* Make data transfer work
* Get all indicators working
* Remove old transport
* Prepare for pullreq
* Revert keymap from testing to production
* Final error checking for pull request
* Remove autogenerated is_command from config.h
* Rewrite pin toggles using qmk functions
* 412_64 move to handwired
412_64 and its second printing, Mark Zero Stand Aside, are now obsolesced by new hardware. As only two units exist in the wild not owned by me, I'm moving the definition to handwired.
* Mark 3 Stand Aside ready for production.
Uploading firmware, compiled and tested, for Mark 3 Stand Aside. The hardware's ready, now the software is too.
* Whoops.
Should've branched before pushing Stand Aside. Sorry 'bout that.
* Revert "Whoops."
This reverts commit d222046cfe6183ed0c42286ec9ebb5034a5d1009.
* Revert "Mark 3 Stand Aside ready for production."
This reverts commit c790899af7a6d92855aebe6a96003f1fe9be66b3.
* Update userspace with common config.h
* Add my dz60, satan and xd75 keyboard keymaps
* Fixing executable bits changed during last upstream merge
* Cleanup unnecessary files and defines
* Remove unnecessary defines from userspace config
* Add underglow controls to dz60 function layer
* Fixing merge conflicts
* Fixing exectable bits changed during merge
* Userspace update
* intial commit
* fix up some of the cookie cutter code
* define pins used and size of switch matrix
* enable lighting settings and bootmagic lite
* create the appropriate LAYOUT macro
* remove a comma for compilation errors
* provide a suitable keymap
* disable console and command due to firmware being too large
* add Caps Lock LED support
* Add QMK Configurator support
* fix markdown rendering
* fix mechmerlin to mechkeys
* use `register_code16` and relatives for tapdance code
* rename tapdance keys to more closely mirror the `KC` names in QMK
* additional naming change to match QMK style
* Gray Studio HB85 Initial Support
* Fixed README image
* Updated README
* Disabled Bootmagic and Console for HB85
* Fixed Numpad 4 matrix place
* Fixes board crashing with RGB enabled
* Moved HB85 files to gray_studio folder
* Uses old i2c library since this version makes RGB underglow work
* Improved default keymap with underglow control layer
* Removes obsolete program and uses generic script instead
As per zvecr feedback
* Uses GPIO Functions to initialise and set RGB underglow PINS
* Add keycode for KC_MAKE
* Add KC_MAKE keycode
* Add stanrc85.c file with KC_MAKE
* Remove unused include
* Improved KC_MAKE stolen from Drashna
* Define mod mask for new KC_MAKE code
* RESET board to flash after compiling
* Remove send_string
* RESET fixed in KC_MAKE
* add dusty keymap
* change keymap folder to match my github username
* initial keymap completed in comments only
* layout without NAV completed in comments only
* disable Command to prevent interference with Space Cadet keys
* switch _ and \ in the symbol layer
* Layers complete through _NAV
* add thumb keys to _NAV
* complete _NUM
* all layouts complete; still needs `process_user_record()`
* completed first draft of keymap; still needs config.h to match
* corrected keycodes for Mac macro-volume keys
* fix Mac mute keycode
* add missing Mac keycodes for previous and next track
* placeholder for qwerty layout, not yet completed;
remove unnecessary breaks;
add todos
* eliminate Preonic branch before switching to Minidox branch:
• delete dustypomerleau Preonic keymap folder
• complete keymap.c (QWERTY layer, vanilla numbers layer)
TODO:
• add preferences to config.h
• complete the README
* edit commented keymap diagrams for clarity in dual function keys
* define initial config.h and add rules.mk for mouse key support
* fix redundant line after implementation of tap_code()
* fixed key_timer declaration, added README and rules
* formatting of keymap
* add CTPC to config
* cycle thumb keys to favor center position
* modify config.h for temporary Pro Micro compatibility
* remove superfluous call to use serial; homebrewed mod tap keys are still broken with OSL
* merge _SYS and _MEDIA on new Z_SYS key
* ALT_OP example of new MT macro complete
* initial narze-inspired MT fixes in PRU
* add (currently superfluous) custom keycode for the _SYS layer
* rudimentary `OSL` symbol macros that immediately register the mod and fail to reset the oneshot layer, but do output the proper keys—fix both of these things
* remove permissive hold to improve tapping performance
* remove calls to `clear_oneshot_layer_state()`, as they have no effect inside `process_record_user()`. Tapdance appears to be the way forward.
* final commit before tapdance code; correct layout in comments
* initial tapdance code for shifted mod taps
* add numeric and ergo NUM layers and pinky shifts for keycuts
* add TD() wrappers to tapdance codes and clean up commented layout guides
* add faux return to cur_dance to allow compilation - TODO: research what the default clause should be in cur_dance
* update commented schematics for better readability
* add backspace and delete to lockable layers, Z_SYS -> SYS_Z for consistency, fix schematic errors
* add `DOUBLE_SINGLE_TAP` to tapdance cases to allow doubling of the single tap character without waiting tapping term
* remove reduced oneshot tapping toggles
* update README
* newline tweak :)
* Update keyboards/minidox/keymaps/dustypomerleau/keymap.c
Co-Authored-By: dustypomerleau <dustypomerleau@users.noreply.github.com>
* Update keyboards/minidox/keymaps/dustypomerleau/config.h
Co-Authored-By: dustypomerleau <dustypomerleau@users.noreply.github.com>
* Update keyboards/minidox/keymaps/dustypomerleau/config.h
Co-Authored-By: dustypomerleau <dustypomerleau@users.noreply.github.com>
* Update keyboards/minidox/keymaps/dustypomerleau/config.h
Co-Authored-By: dustypomerleau <dustypomerleau@users.noreply.github.com>
* Update keyboards/minidox/keymaps/dustypomerleau/config.h
Co-Authored-By: dustypomerleau <dustypomerleau@users.noreply.github.com>
* remove `PREVENT_STUCK_MODIFIERS`, as this is default behavior
* enable extrakey in rules to enable media keys
* enable extrakeys for media key compatibility on macOS
* add dash and slash to _NUM layers
* change to universal volume keycodes
* revert micro volume adjustments to macOS-specific codes due to lack of functionality (macro volume adjustments are still universal)
* fix image of _SYS layer in comments
* more diagram fixes in comments
* fix typo
* simplify tapdance code
* match _NUM_N to _NUM_E
* move slash to allow better use of comma in number layers
* match layer and keycode enums to the docs
* correct qwerty numlock to match numeric numlock layer
* Change how desktop commands work
* Add DST_MOD_MASK as a config option
* DST_RMV → DST_REM
* Add melody96:konstantin keymap
* Update custom SEND_STRING
* Move feature flags from userspace into keyboard rules
* Use "Vo-", "Vo+" instead of "VoD", "VoU" in keymap comments
* Add RGB controls and numpad Unicode to Melody96 keymap
* Add RGB_SET keycode to Melody96 and RGB files to userspace
* Generate UNICODE and UNICODEMAP constants using macros
* Avoid collisions with X_* send string constants
* Use two spaces before inline comments
* Add _keymap versions of other custom Quantum functions
Not added: eeconfig_update_keymap, eeconfig_read_keymap
* Switch to UNICODEMAP in keyboard rules
* Make toggle_numpad a nested function in process_record_user
* Set Melody96 underglow color to Godspeed blue on EEPROM reset
* Remove most _keymap and _user definitions in userspace
Some keyboards misuse _user functions by defining them in the base files
instead of the corresponding _kb functions (especially led_set_user and
matrix_init_user). Until this is fixed (#5148), I've removed definitions
in my userspace that could cause linking collisions.
* Update GODSPEED_BLUE values and RGB mode keys
* Add GODSPEED_YELLOW color
* Set preferred intervals for rgblight effects
* Update tap dance function names
* Replace td_lshift_fn with generic td_mod_layer, add TD_RCTL_FN
Move TD_FN_RCTL after TD_RCTL_FN
* Replace td_fn_rctrl with generic td_layer_mod
* Add blank lines, prefer explicit initialization
* ACTION_TAP_DANCE_DOUBLE_MODS → ACTION_TAP_DANCE_DOUBLE_MOD
* Update Godspeed colors
* Add media controls to Melody96 keymap
* Add SysRq, Break combos and other keys to Melody96 keymap
* Add HOME/END keys as upper/lower on arrow-up/down
* Reduce .hex file size by turning off unneeded options
* Put digit keypad onto left hand upon RAISE; this will sometimes be preferable to double-hits of right hand
* Latest super latest version merge
* cbbrowne keymap for XD75re
* starting notes on XD75re keymap plans
* First draft of bottom row of QWERTY
* Switch my special bottom line over to QCENT
* Dunno
* Filling in wanted keys, bit by bit...
* Add copyright, extra macro
* Clean up comments, remove some experimental code I didn't like
* TODO plans for xd75re
* clean up keyboard layout
* QCENT2 is my new experiment for the main keyboard...
* Add a few more main layer keys, and modify LOWER to shift things outwards to conform with main layer
* Clean up RAISE layer to conform with main layer, remove QCENT layer as QCENT2 is the new thing
* More xd75 changes, now that I actually have it in hand
* shift keymap around, as original attempt was a bit too aggressive in keeping to the edges
* more revs to XD75
* Dropping parts of the centre keypad in favor of Keys I Really Need
* Improve documentation to conform with how builds are done now
* Improve documentation to conform with how builds are done now
* Add cbbrowne rules file as alternative to having the rules in Makefile
* Makefile not needed anymore for individual keymap
* Some revs to my keymapping
* Add {}
* Add PGUP/PGDN
* Shifted some middle-range keys around
* Needed Tilde, Backquote, and to shift RESET onto FUNCTION layer
* Wanted ~
* cbbrowne hasn't anything to do with hadron keymaps
* trim unneeded bits
* I prefer OrgMode for my notes
* Have a right-alt
* Layer keys make LED colors change
* Add sample user rules for cbbrowne
* Add source of xd75 rules
* Individualized xd75 rules
* Adopt LAYOUT to genericize the layout as an ortholinear 5x15 keyboard
* Tidy up 5x6.h
- replaced tabs with spaces (QMK convention)
- aligned layout macro visually
* Fix Configurator support for Dactyl Manuform 5x6
- layout macro had the wrong name in info.json
* Tidy up 5x7.h
- replaced tabs with spaces (QMK convention)
- aligned layout macro visually
* Fix Configurator support for Dactyl Manuform 5x7
- corrected keyboard height
- layout macro had the wrong name in info.json
* Tidy up 6x6.h
- replaced tabs with spaces (QMK convention)
- aligned layout macro visually
* Fix Configurator support for Dactyl Manuform 6x6
- layout macro had the wrong name in info.json
* Separate keymaps to VIA enabled/dissabled.
- Default rules.mk has been changed to disable via.
- VIA keymaps have been added for default keymaps.
* Update naming
* Initial refactor of handwired bluetooth mod to keymap
* Initial refactor of handwired bluetooth mod to keymap - strip out unnecessary duplicate config, update readme
* Initial refactor of handwired bluetooth mod to keymap - reduce firmware size
* Initial refactor of handwired bluetooth mod to keymap - update readme image
* add dusty keymap
* change keymap folder to match my github username
* initial keymap completed in comments only
* layout without NAV completed in comments only
* disable Command to prevent interference with Space Cadet keys
* switch _ and \ in the symbol layer
* Layers complete through _NAV
* add thumb keys to _NAV
* complete _NUM
* all layouts complete; still needs `process_user_record()`
* completed first draft of keymap; still needs config.h to match
* corrected keycodes for Mac macro-volume keys
* fix Mac mute keycode
* add missing Mac keycodes for previous and next track
* placeholder for qwerty layout, not yet completed;
remove unnecessary breaks;
add todos
* eliminate Preonic branch before switching to Minidox branch:
• delete dustypomerleau Preonic keymap folder
• complete keymap.c (QWERTY layer, vanilla numbers layer)
TODO:
• add preferences to config.h
• complete the README
* edit commented keymap diagrams for clarity in dual function keys
* define initial config.h and add rules.mk for mouse key support
* fix redundant line after implementation of tap_code()
* fixed key_timer declaration, added README and rules
* formatting of keymap
* add CTPC to config
* cycle thumb keys to favor center position
* modify config.h for temporary Pro Micro compatibility
* remove superfluous call to use serial; homebrewed mod tap keys are still broken with OSL
* merge _SYS and _MEDIA on new Z_SYS key
* ALT_OP example of new MT macro complete
* initial narze-inspired MT fixes in PRU
* add (currently superfluous) custom keycode for the _SYS layer
* rudimentary `OSL` symbol macros that immediately register the mod and fail to reset the oneshot layer, but do output the proper keys—fix both of these things
* remove permissive hold to improve tapping performance
* remove calls to `clear_oneshot_layer_state()`, as they have no effect inside `process_record_user()`. Tapdance appears to be the way forward.
* final commit before tapdance code; correct layout in comments
* initial tapdance code for shifted mod taps
* add numeric and ergo NUM layers and pinky shifts for keycuts
* add TD() wrappers to tapdance codes and clean up commented layout guides
* add faux return to cur_dance to allow compilation - TODO: research what the default clause should be in cur_dance
* update commented schematics for better readability
* add backspace and delete to lockable layers, Z_SYS -> SYS_Z for consistency, fix schematic errors
* add `DOUBLE_SINGLE_TAP` to tapdance cases to allow doubling of the single tap character without waiting tapping term
* remove reduced oneshot tapping toggles
* update README
* newline tweak :)
* Update keyboards/minidox/keymaps/dustypomerleau/keymap.c
Co-Authored-By: dustypomerleau <dustypomerleau@users.noreply.github.com>
* Update keyboards/minidox/keymaps/dustypomerleau/config.h
Co-Authored-By: dustypomerleau <dustypomerleau@users.noreply.github.com>
* Update keyboards/minidox/keymaps/dustypomerleau/config.h
Co-Authored-By: dustypomerleau <dustypomerleau@users.noreply.github.com>
* Update keyboards/minidox/keymaps/dustypomerleau/config.h
Co-Authored-By: dustypomerleau <dustypomerleau@users.noreply.github.com>
* Update keyboards/minidox/keymaps/dustypomerleau/config.h
Co-Authored-By: dustypomerleau <dustypomerleau@users.noreply.github.com>
* remove `PREVENT_STUCK_MODIFIERS`, as this is default behavior
* enable extrakey in rules to enable media keys
* enable extrakeys for media key compatibility on macOS
* add dash and slash to _NUM layers
* change to universal volume keycodes
* revert micro volume adjustments to macOS-specific codes due to lack of functionality (macro volume adjustments are still universal)
* keymap + alpha
* some fixes
* keymap + alpha
* some fixes
* drashna changes
* linked main Alpha repo in keyboards/alpha readme
* missed a spot
* there's another function called FUNC lol
* keymap + alpha
* some fixes
* keymap + alpha
* drashna changes
* Fixed include
* Revert "Fixed include"
This reverts commit ea92f261f86d8433eab313cde498adca1682a006.
* messed up my git, fixed include
* starting work on TMO50 layout
* Update keyboards/tmo50/keymaps/default/keymap.c
Co-Authored-By: PyrooL <lm11887@gmail.com>
* Removed since options are in userspace
* Removed RGB option that was breaking one of my builds
* Remove unused options
* Removed options present in userspace, add board specific options here
* Removed code also present in userspace
* Turns out those lines were needed, added them back
* Testing changes
* Added code to ensure board read as ANSI instead of default ISO for HS60
* Setting \ key to "MOD" instead of "ALPHA" for lighting
* Added personal keymaps for Planck, Preonic, Vitamins Included by Juno
* Removing redundancies as suggested
* More removals that were missed out in the previous commits
* Updated Preonic to use new layout
* More redundancies missed out
* Updated more optimal code for FN layer LED indicator.
* Further codes clean up.
* Added a dual windows/osx layout
Default layer is normal ISO for windows. Second layout is Windows ISO layout but for OSX, but with the keys corrected so you will get the correct shifted and alt'd keys on OSX (keyboard keys match OSX keys without having to change your keyboard type in system preferences). Layer three is configuration and other functions, and layer four is where the shifting magic happens. Also tab and caps lock have been swapped around.
* made sure bootmagic is in a seperate rules.mk
made sure bootmagic is in a seperate rules.mk
* commiting the keymap rules.mk
commiting the keymap rules.mk
* [keymap] adding my Levinson keymap
pretty self explanatory, added the readme, just in case
tested it just now, seems to work fine for my needs
* Update keymap.c
removing the deprecated persistent layer function as Drashna kindly reminded me
* Apply suggestions from code review
incorporated the suggestions, and thanks again for taking care of me with my silly changes :)
Co-Authored-By: OMGVee <mateescu.victor@gmail.com>
* Fix up audio calls
* Add backlight controls
* Add backlight controls and remove RGB underglow
* Make HS60 board specific changes to readme
* Remove BL_TOGG as it isn't use on this board
* use #pragma once
* get rid of code for unused indicators
* pragma once and other small fixes for consistency
* use #pragma once
* pragma once and other small fixes for consistency
* add a short blurb to the readme
* turn on compiler optimization flags
* remove the compiler optimization
* remove compiler optimization for super16
* pragma once and turn on bootmagic lite
* pragma once changes and turning on bootmagic lite
* switch to using pragma once
* switch to using #pragma once
* switch to using #pramga once
* Initial Clueboard 66% arm support
* Fix LAYOUT_66_ansi
* wip
* Bring this branch up to date with led_matrix
* Get Clueboard 66% hotswap working with led_matrix
* stm32 cleanup
* Fix compiling for clueboard 66% hotswap prototype
* Reduce the size of the prototype firmware
* initial commit
* get rid of vanilla cookie cutter code and replace with more correct info
* edit config file for pins and switch matrix size
* turn on bootmagic lite, and backlight/rgb settings
* copy pasta switch matrix from noroads tool
* create an appropriate keymap (copy pasta)
* disable some features to decrease firmware file size
* add qmk configurator support
* add in support for caps lock, scroll lock, and num lock leds
* introduce wkl directory and readme
* move bface into winkeyless directory and edit readme for new make instructions
* move bmini into the winkeyless directory and edit readme
* move bmini ex into winkeyless directory
* edit readme some more
* add newbs guide to readmes
* fix path to bface
* temporarily turn off community layout support until we refactor this taking out all the custom ps2avrgb stuff
* Change Command keycode defaults to match corresponding Bootmagic codes
* Make alternate magic key keycodes consistent
* Reflect changes from previous commit in tmk_core/common/command.c
* Remove unnecessary MAGIC_KEY_* definitions from keymaps compatible with these changes
* Swap E and BSPACE for MAGIC_KEY_EEPROM
* Add MAGIC_KEY_EEPROM_CLEAR instead of MAGIC_KEY_EEPROM_ALT
* Remove BOOTMAGIC_ENABLE checks around EECONFIG stuff
* Update Command descriptions
* initial work to add eeprom to haptic feedback and decouple the feedback process from keyboards
* Haptic feedback enhancements: on/off toggle working, feedback order working
todo:
-work on modes switching
-get modes switching to save to eeprom
* haptic enhancement - eeprom and modes added
* Added set and get functions for haptic feedback
* initial implementation of solenoids under haptic feedback
* changed eeprom to 32 bits to reserve blocks for future features
* start documentation of haptic feedback
* change keycode per comment from reviewers
* typo fixes
* added eeprom for solenoid configs
* added solenoid and docs
* Add/fix default parameters configs, improve docs
* more doc cleanup
* add in solenoid buzz toggle, clean up doc
* some fixes for error in compiling solenoid
* fix a chibios specific i2c read function and added one for AVR controllers in DRV2605L.c
* fixes for avr side issues
* update keymap
* fix keymap compile error
* fix bugs found during solenoid testing
* set pin that is not powered during bootloader
* added warning about certain pins on the MCU may trip solenoid during DFU/bootloader
- flags for the linker
- added INSERT key as I kinda use it for work fairly often
- turned on more things in rules.mk since I recovered space via linker
flags and whatnot
* added my own keymap
* changed thing
* updated keymap Samuel
* updated laypout for better one handed use
* updated stuff I want
* happy with my lagout
* formatting
* Added new literate config
* made everything nice
* cleaned
* fixed spelling and two small bugs in macros
* Made press and lift function for modifiers
* Remove problematic unicode_map stub definition in process_unicodemap.c
* Add unicode_map declaration to process_unicodemap.h
* Disable UNICODEMAP on converter boards that don't use it
* Added xeal60 via clone of lets split
* Delete removed other keymaps
* Basic keymap (no FN). Compiles.
* Removed NP_STAR and NP_SLSH.
* Removed "debounce_algo = manual" in all keyboards with CUSTOM_MATRIX = yes.
* Changed order of rules in TMK. Documented feature.
* Fixed missing whitespace in debounce documentation
Table wasn't working due to missing newline.
* Added bold in a few areas.
* DO NOT USE - Removed debounce from TMK.
* Remove accidental xeal60 commit
* DO NOT USE - debounce successfully compiled.
* DO NOT USE Revert back to original API to support split_keyboards.
* Working eager_pk
* Whitespace cleanup.
* Restored debounce.h since there wasnt any real change.
* Moved debouncing_time variable to inside #if debounce
* Removed check for custom_matrix. We can safely include the debounce file for compilation when custom_matrix is used.
* Removed #include "matrix.h" from debounce.h
* Bug fix - was using MATRIX_ROWS instead of num_rows
* Fixed compilation error with debounce_sym_g
* Renamed DEBOUNCE_ALGO to DEBOUNCE_TYPE
* Malloc array in debounce_eager_pk, since split keyboards only use MATRIX_ROWS/2.
* Fix compile error in debounce_eager_pk
* Stricter, leaner DEBOUNCE_TYPE section in common_features.mk. Cleanup debounce_type.mk
* Migrate fn_actions for default keymaps
* Rename the Grave/Escape Shift masks
* No need for shift_esc_shift_mask
* Change breaks to return false
* Right align pointers
* Add default case
* Separate cases with empty lines
* NUBS_Z: initial version
Create a keycode that is normally Z, but KC_NUBS when tapped while Alt is being held.
This removes the possibility of using an Alt+Z shortcut.
* NUBS_Z: modification
Modify NUBS_Z macro to only use alternate operation if Right Alt is being held, rather than responding to either Alt key.
Also add QMK version keycode to System layer, Equals key.
* Remove unneeded breaks from process_record_user
* Macro refactoring
- removed G_RST and G_C10R macros
- updated G_BRCH macro
- outputs `master` if used while Shift is held down; or my git alias for the current branch otherwise
- updated G_FTCH macro
- outputs `git pull upstream ` if used with Shift; `git fetch upstream ` otherwise
- swapped `modifiers` variable for `get_mods()` function directly for checking modifier state
- swapped keymap-level modifier mask macros for QMK-core mod mask macros (thanks vomindoraan #4337)
- renamed MODS_RALT_MASK to MOD_MASK_RALT (more consistent with the above change)
* Update readme files
* set bootmagic from no to lite and put in a note in the readme
* use pragma once
* discovered a compile error when testing with default keymap. The inlined led functions need to be externed in the .c file
* might as well turn on mouse keys as well
* [Keymap] Adding buhearns keymap
* Removing deprecated function
with fauxpark's help
* Update readme.md
* Switching to UNICODE_ENABLE
with drashna's help
* Update rules.mk
* Update config.h
* Update config.h
Tidying up
* Update keymap.c
Tidying up
* Update readme.md
Tidying up
* Update rules.mk
Tidying up
* Removing GESC and adding TILD
* initial commit with edits to vanilla code
* Add QMK Configurator support
* add an appropriately generated keymap
* pins, matrices, and features added in
* moved it all to a regular directory. It's called regular as that's what it's called in the group buy. In the future we will have other directories for the other PCBs that are delivered to customers.
* forgot caps lock led support
* Update keyboards/doro67/regular/keymaps/default/config.h
Use the NAME
Co-Authored-By: mechmerlin <30334081+mechmerlin@users.noreply.github.com>
* Update keyboards/doro67/regular/readme.md
Be more explicit
Co-Authored-By: mechmerlin <30334081+mechmerlin@users.noreply.github.com>
* Add stm32f072 base ck4x4 to handwired
* add prints
* Save these tries
* Save changes again
* Working hadron oled
* OLEd working but ws2812b still iffy:
* save another try
* Encoder feature + OLED
* RTC code
* Implement clock setting mode
* Whitespace
* Encoder hooked up to working LED PWM code
* Add missing files
* eeprom changes
* Save changes
* Move i2c master
* Move satisfaction75 under cannonkeys
* Set proper default folder
* Revert some core changes
* Undo paved iris changes
* Reorganize code for maintainability and prep for new features
* Add starting code for clock OLED mode
* Clock set mode finished
* Add custom encoder modes
* Actually add VIA keymap
* Gate to only 072
* fix gate for only 072
* Update header guards and includes
* Update i2c selection strategy
* Update board.c to handle software reset to DFU
* add dusty keymap
* change keymap folder to match my github username
* initial keymap completed in comments only
* layout without NAV completed in comments only
* disable Command to prevent interference with Space Cadet keys
* switch _ and \ in the symbol layer
* Layers complete through _NAV
* add thumb keys to _NAV
* complete _NUM
* all layouts complete; still needs `process_user_record()`
* completed first draft of keymap; still needs config.h to match
* corrected keycodes for Mac macro-volume keys
* fix Mac mute keycode
* add missing Mac keycodes for previous and next track
* placeholder for qwerty layout, not yet completed;
remove unnecessary breaks;
add todos
* eliminate Preonic branch before switching to Minidox branch:
• delete dustypomerleau Preonic keymap folder
• complete keymap.c (QWERTY layer, vanilla numbers layer)
TODO:
• add preferences to config.h
• complete the README
* edit commented keymap diagrams for clarity in dual function keys
* define initial config.h and add rules.mk for mouse key support
* fix redundant line after implementation of tap_code()
* fixed key_timer declaration, added README and rules
* formatting of keymap
* add CTPC to config
* cycle thumb keys to favor center position
* modify config.h for temporary Pro Micro compatibility
* remove superfluous call to use serial; homebrewed mod tap keys are still broken with OSL
* merge _SYS and _MEDIA on new Z_SYS key
* ALT_OP example of new MT macro complete
* initial narze-inspired MT fixes in PRU
* add (currently superfluous) custom keycode for the _SYS layer
* rudimentary `OSL` symbol macros that immediately register the mod and fail to reset the oneshot layer, but do output the proper keys—fix both of these things
* remove permissive hold to improve tapping performance
* remove calls to `clear_oneshot_layer_state()`, as they have no effect inside `process_record_user()`. Tapdance appears to be the way forward.
* final commit before tapdance code; correct layout in comments
* initial tapdance code for shifted mod taps
* add numeric and ergo NUM layers and pinky shifts for keycuts
* add TD() wrappers to tapdance codes and clean up commented layout guides
* add faux return to cur_dance to allow compilation - TODO: research what the default clause should be in cur_dance
* update commented schematics for better readability
* add backspace and delete to lockable layers, Z_SYS -> SYS_Z for consistency, fix schematic errors
* add `DOUBLE_SINGLE_TAP` to tapdance cases to allow doubling of the single tap character without waiting tapping term
* remove reduced oneshot tapping toggles
* update README
* newline tweak :)
* Update keyboards/minidox/keymaps/dustypomerleau/keymap.c
Co-Authored-By: dustypomerleau <dustypomerleau@users.noreply.github.com>
* Update keyboards/minidox/keymaps/dustypomerleau/config.h
Co-Authored-By: dustypomerleau <dustypomerleau@users.noreply.github.com>
* Update keyboards/minidox/keymaps/dustypomerleau/config.h
Co-Authored-By: dustypomerleau <dustypomerleau@users.noreply.github.com>
* Update keyboards/minidox/keymaps/dustypomerleau/config.h
Co-Authored-By: dustypomerleau <dustypomerleau@users.noreply.github.com>
* Update keyboards/minidox/keymaps/dustypomerleau/config.h
Co-Authored-By: dustypomerleau <dustypomerleau@users.noreply.github.com>
* remove `PREVENT_STUCK_MODIFIERS`, as this is default behavior
* Tweaks to default 1up60hte layout + support for HHKB style layout
* Added changes to layouts
* Fix config.h
* Fixed errant KC_NO in layout
* Added readme to keyboard... Will update with images/store link when avail.
* Update to use LAYOUT_60_hhkb default layout
* md formatting fix
* Update keyboards/1upkeyboards/1up60hte/readme.md
Co-Authored-By: bubnick <bubnick@users.noreply.github.com>
* Update keyboards/1upkeyboards/1up60hte/readme.md
Co-Authored-By: bubnick <bubnick@users.noreply.github.com>
* Added layout to rules.mk, fixed layout to be compatble with community HHKB keymaps
* Added image, updated store page to readme
* Add userspace files for vosechu
* Code review corrections
* Few more code review corrections
* Initial add of Laptreus code
* Initial add of Laptreus code
* Adding last punctuation to default
* Add some debug suggestions to the debug readme
* Fixes for PR feedback
* Fixing capitalization of readme files
* update auto detect connection logic
* remove unneeded file
* make an appropriate readme
* amend the LAYOUT macro to adhere to new QMK standards and create an appropriate keymap
* add QMK Configurator support
* a bunch of changes lol
* delete unneeded routines
* update date to modern times
* remove a useless prototype
* add in drashna's suggestions on PR
* added keyboard jj4x4, a shorter version of the jj40
* removed useless file
* edited jj4x4 readme.md
* optimized array size in jj4x4 config.h, removed reference to jj40 layouts from rules.mk
* removed custom matrix for this ps2avrgb board, refactored column and row pins
* fix a bug in which the physical matrix did not match the physical layout. Top row was missing 1 key and bottom row had 1 extra key
* amend keymap to account for the new physical matrix
* 6.25u space bar is actually supported, so add a new layout that supports this
* fix keymap readme to no longer need the cautionary warning
* Moving sentraq keyboards to sentraq subdirectory.
* Updating readme markdown to correct make commands.
* Updating s60_x references to point to the new vendor subdirectory.
* Fixed stripped spaces in markdown.
* Updated help information in s60_x readme and linked to additional documentation.
* Make QMK Configurator work with e7-v1
This adds the missing info.json file for the e7-v1 keyboard which I
forgot to add to the original PR.
This allows to see the correct layout in QMK Configurator.
* Fix the ISO layout
The ISO layout has one extra key (hash/tilde) on row 3 right before
the enter key.
The e7-v1 PCB has this key wired at the same switch as the ANSI
backslash (since this switch is not used in ISO).
The tkl_ansi layout had an incorrect value for the grave/tilde key, and
number row keys were misnumbered. This fix removes the typo and adds the
missing K1C key.
* Fix mixed tabs and spaces in adb_usb and m0110_usb makefiles
* Fix typos in converter build options
* Tweak ordering and spacing in converter makefiles
* initial commit
* Do a nice write up for readme
* establish switch matrix and physical layout
* Put in the pins that are used
* QMK configurator support and keymap
* set bootloader to caterina because pro micro boohoo
* add ortho_4x4 support for user spaces
* got the columns reversed lol
* Tweaks to default 1up60hte layout + support for HHKB style layout
* Added changes to layouts
* Fix config.h
* Fixed errant KC_NO in layout
* Added readme to keyboard... Will update with images/store link when avail.
* Update to use LAYOUT_60_hhkb default layout
* md formatting fix
* Update keyboards/1upkeyboards/1up60hte/readme.md
Co-Authored-By: bubnick <bubnick@users.noreply.github.com>
* Update keyboards/1upkeyboards/1up60hte/readme.md
Co-Authored-By: bubnick <bubnick@users.noreply.github.com>
* Added layout to rules.mk, fixed layout to be compatble with community HHKB keymaps
* Create ISO HHKB keymapping for GH60
* Add media controls to Fn layer
* Use M(x) instead of F(x), add Copyright text
* Add README for additional information about TMO50 features/quirks
* Add indicator LED code
* Move indicator code to tmo50.c
* move over kbd19x into the kbdfans directory
* move over kbd4x into the kbdfans directory
* move kbd66 into the kbdfans directory
* move the kbd6x into the kbdfans directory
* move kbd8x into the kbdfans directory
* move kbd75 into the kbdfans directory
* move kbd67 into kbdfans directory
* add a fairly sparse readme for kbdfans directory
* update make instructions for keyboards and add the Complete Newbs Guide to readmes that was missing it
* get kbd75 compiling again
* remove repetitive #defines of KC_NO and KC_TRNS when QMK_KEYBOARD_H is already included in KBD75
* add links to kbdfans readme
* fix some readme formatting
* there is no reason to have two different keymaps with such a small difference, condensing to one
* turning on backlights by default
* enable backlight by default for kbd66
* noticed that the kbd75 had caps lock led code in every keymap. Moved it out to the keyboard.c so everyone can partake.
* Update keyboards/kbdfans/kbd66/readme.md
Co-Authored-By: mechmerlin <30334081+mechmerlin@users.noreply.github.com>
* update readme link ordering
* Added QMK Config for Sentraq Number Pad keyboard.
* Sentraq Number Pad documentation cleanup.
* mend
* Added json for configurator.
* Small documentation tweaks.
* Updated the layouts to use the default layouts that match.
* Uncommended user level functions in keymap, left custom keycode/macro code commented but documented why.
* Switched to #pragma once from #ifndef structure in header file.
* Moved Sentraq number pad to sentraq creator directory.
* Renamed sentraq_number_pad to number_pad now that it's nested in the sentraq directory.
* Updated references inside the files for the keyboard rename and nesting.
* Adds keymaps for muzfuz
* Remove unused keys from adjust layer
* Bring in line with current QMK standards.
* Adds Preonic and adjusted Planck keymaps
* Make changes per review request
* update reset sequence info
* fix my rgb underglow led number flub
* add a more sensible keymap
* add caps lock led support
* remove unused #define
* swap the spacebar sizes around to match the space65
* use vomindoraan's suggestion in PR to use IS_LED_ON
* fixed arrow keys and left control
* added right shift
* latest version
* reverted arrow keys
* edited readme
* added osu layer
* updated osu layout
* updated osu layout
* added full arrow keys to osu layout
* in case i mess up creating macros
* added the best meme key in the world
* added plover steno layer
* updated boy314 layout
* removed unused layers
* added boy314 xd75 layout, inspired by preonic layout
* added boy314 xd75 layout, inspired by preonic layout
* version 2 of boy314's xd75 layout
* added readme notes
* updated readme for boy314 xd75 layout
* qwerty support, brackets on bottom row, caps lock underglow
* fixed readme/
* small changes to allow merging
* minor changes to format
* fixed up default readme
* added numpad and tweaked bottom row
* updated xd75 and preonic rev3 keymaps
* added initial half n half files
* fixed .h file
* updated names
* fixed layout in halfnhalf.h
* fixed manu name, changed bootloader in rules.mk
* removed redundancies in preonic and xd75 layouts
* readme updated
* initial commit
* get rid of vanilla code, and fix formatting
* write up a nice looking readme
* add in pins and enable features
* define keymap and switch/physical matrix
* add QMK Configurator support
* switch to bootmagic lite to decrease file size
* Move boards to cannonkeys and share resources
* Share common files between cannonkey boards
* Fix ortho60 keymap
* update LED numbers
* Add RGB keys to Ortho60 and Ortho48
* Add Backlight control to default layout Ortho60 and 48
* Remove unnecessary ws2812.c SRC from rules.mk
* Make Default standard layout
Move Mac OS layout to a separate layout. Basically Mac has the Alt and GUI keys swapped
* Fix typos
* Use Bootmagic keys instead of separate MacOS keymap
* Create ISO HHKB keymapping for GH60
* Add media controls to Fn layer
* Use M(x) instead of F(x), add Copyright text
* Add README for additional information about TMO50 features/quirks
* handwired/space_oddity: refactor
- config.h: updated to use #pragma once include guard
- rules.mk: replace `?=` with `=`
- space_oddity.h:
- updated to use #pragma once include guard
- layout macro KEYMAP renamed to LAYOUT
- default keymap:
- updated to use #include QMK_KEYBOARD_H
- replace references to Planck keycodes
- replace fn_actions-powered layer switch keycode
- rebuild keymap block comments
- keymap layers now use short-form keycodes
- refactor action_get_macro keycodes into process_record_user
* handwired/space_oddity: Configurator support
* handwired/space_oddity: readme cleanup
- update readme to better conform with QMK template
- fixed the make command.
* Add the e7-v1 keyboard
The e7-v1 is a 75% keyboard made by Exclusive based on an Atmega32u4
pub with RGB lights on top and backlighting.
This PR add supports for the regular ANSI layout and ANSI split
backspace layout. No ISO yet :(
* My e7-v1 keymap
Difference from base layout:
* split backspace
* Home & End on last keys of row 0 instead of Insert/Del
* Fn is on the End key when hold
* supports both a windows/linux keymap and osx keymap
* layer change is reflected in the rgb leds of the logo
The following layouts were being rendered with 6.75u Spacebars instead of 7u:
- LAYOUT_ansi_blocker_7u
- LAYOUT_ansi_blocker_7u_small_lshift
- LAYOUT_ansi_blocker_7u_small_bspc
- LAYOUT_ansi_blocker_7u_small_lshift_small_bspc
- LAYOUT_iso_blocker_7u
This commit corrects this issue.
Flagged by yanfali on QMK Discord.
- layout macro and keymap layers refactored to more closely resemble physical keyboard layout
- added layout mockup to alice.h
- correct info.json data (was missing a key)
* Added southpole keyboard
added southpole keyboard folder and files including keymaps folder. Keymaps have errors and will not compile yet
* Add files via upload
added manufacturer and product name and description
* Update config.h
* Add files via upload
changed formating added layer
* cleaned up files, fixed foobeard keymap, and added maker info
* fixed keymap files
* Update keyboards/southpole/keymaps/foobeard/keymap.c
Co-Authored-By: ericduns <ericduns@gmail.com>
* Update keyboards/southpole/keymaps/default/keymap.c
Co-Authored-By: ericduns <ericduns@gmail.com>
* made changes fixing outdated lines and added readme.md
* made requested changes for pr to all files
* removed vs code and added new line to southpole.h
* moved some stuff around on my iris layout, but don't expect a lot of changes in the future
* good working setup
* [keymap] some mods to my (omgvee) Helidox keymap
* updated zlant keymap with diagram
* made edites to last post
* noticed slight error in default keymap due to my own mistake. fixed to be the same as default
* fixed spacing in second base layer second row from left
* Added xealousbrown keyboard.
* Changed to pragma once in config.h
* Update keyboards/handwired/xealousbrown/rules.mk
Added bootloader.
Co-Authored-By: alex-ong <the.onga@gmail.com>
* Update keyboards/handwired/xealousbrown/config.h
Commented out IS_COMMAND() since it is already default value.
Co-Authored-By: alex-ong <the.onga@gmail.com>
* Remove duplicated or unnecessary definitions in config.h and rules.mk
* Use IS_HOST_LED_ON() macro
* Add mouse acceleration to kbd6x:konstantin keymap
* Clear and restore mods when sending macros
* Make SEND_STRING_CLEAN a config option
* Add NO_ACTION_ONESHOT to userspace config
* Remove unnecessary IS_COMMAND definition in clueboard/66/rev4
* Replace keyboard_report->mods with get_mods() in IS_COMMAND definitions
* Update docs to use get_mods() instead of keyboard_report->mods
* Replace keyboard_report->mods with get_mods() in tmk_core/protocol/usb_hid/test
For some reason, this occurrence used KB_LSHIFT and KB_RSHIFT, which don't exist
* Replace keyboard_report->mods with get_mods() in Massdrop keyboards (as per @patrickmt)
* Move Iris via support to Via keymap
And move it out of the main keyboard files
* Actually add via keymap folder
Because using git when you're tired is apparently a very bad idea, and you do stupid things like not running git add
* Clean up config.h file for iris via keymap
* Add default value for IS_COMMAND for COMMAND feature
* Cleanup and consistency
* Update Templates to reflect change
* Fix IS_COMMAND in template
* Fix IS_COMMAND define
* Use consistent IS_COMMAND block in templates
* Remove unnecessary `#undef IS_COMMAND` directives
* Fix compile issue on orthodox
* Reomve IS_COMMAND option for newer boards
* Remove all existing definitions of IS_COMMAND if they use default LSHIFT and RSHIFT setting
* Remove a couple of additional IS_COMMAND defines
* Remove remaining redundant IS_COMMAND definitions
* Remove #undef IS_COMMAND from orthodox:drashna and whitefox:konstantin
* Remove multiple empty lines in modified config.h files
* Update additional boards
* Reomve IS_COMMAND from newer boards
* Update Alice keyboard
* Remove IS_COMMAND from additional boards
Jan 24th edition
* Basic Fanoe support (no LED yet)
* Enable RGB lights
* Backlighting support
* Change to reflect Wheat Field brand of Fanoe PCB
* Hot swap variant
* Fix review comment issues
* Fix review issues
* Corrected rules.mk
* Change naming to avoid using possibly copyrighted names
* Added info.json
* Corrected manufacturer name in info.json
* Keymap updates
* Add layout for use with ws2812b and such
* Fixes based on code review
I worked on those keymap to simplify the use of 60% keyboards for
coders. Instead of trying to mimic planck, this keymap remove
raise/lower layer complexity and keep some important sign keys for coder
in the upper right side pretty much the same way as they are on a full
keyboard.
A karabiner configuration is also provided to mimic most of the keymap
features on the macbook internal keyboard for when you are forced to use
it.
* Custom keymap.
* Fix magic layer, enable Unicode.
* Update README.
* Make Unicode config change keymap-local.
* Move magic to AltGr, simplifying layout.
* Changes per Drashna.
* Fix magic+esc = backtick!
* Change reset implementation per Drashna's suggestion.
* Add a few more symbols so long as the commit is open - √ℜℂℤ⊙ℚℕ and the like.
* Typo fix.
* Slight simplification, drop an extra variable.
* Added busby222 config
* Fixed bug with leftover colemak and dvorak layouts
* Fixing dumb mistake
* Minor tweaks to layout. Need to use at work tomorrow to make more adjustments
* Added mouse controls for raised layer
* Update keymap.c
* Update keymap.c
* Update keymap.c
* Update keymap.c
* Update keymap.c
* Update config.h
Added mouse specific settings for smoother mouse movement (default is sort of hard to use)
* config.h cleanup
* Lowering max mouse speed (personal preference)
* Update keymap.c
* Update keymap.c
* Update keymap.c
* Update keymap.c
* Update keymap.c
* Update config.h
* Update rules.mk
* Added MIDI layer
* Switched the Adjust layer to an MO call
* Update keymap.c
* Fixing bugs related to midi layer
* Changed "Caps Lock" ctrl to RCTRL for use in VirtualBox
* Added shovelpaw keyamp
* Removed deprecated QUANTUM_DIR code block
* Switched midi layer to be only active when held
* Addressing requested changes
* Removed unnecessary include statement
* initial commit
* move the original kbd67 stuff into its own directory, rev1
* get rid of vanilla cookie cutter code
* put in the switch matrix pins, backlight pin, and rgb underglow pin. Number of underglow LEDs is questionable.
* switch matrix created for hotswap
* create a basic keymap for testing
* make info.json for QMK Configurator support
* rename kbd67 due to compile error
* kbd67 generic readme file
* fix make instructions for the new rev1
* comment out unneeded rgb light #defines
* Update keyboards/kbd67/readme.md
Add an extra space for proper markdown rendering
Co-Authored-By: mechmerlin <30334081+mechmerlin@users.noreply.github.com>
* Update keyboards/kbd67/hotswap/hotswap.h
Co-Authored-By: mechmerlin <30334081+mechmerlin@users.noreply.github.com>
* Update keyboards/kbd67/hotswap/keymaps/default/keymap.c
Co-Authored-By: mechmerlin <30334081+mechmerlin@users.noreply.github.com>
* use pragma once
* proper format of MechMerlin
* Cluecard: refactor
- renamed layout macro KEYMAP to LAYOUT
- reformatted layout macro to more closely resemble physical device layout
- keymaps now use #include QMK_KEYBOARD_H
- config.h files updated to use #pragma once method
- deleted outdated QUANTUM_DIR code blocks from rules.mk files
- white space changes on rules.mk files (alignment/readability)
* Cluecard: Configurator support
* Cluecard: readme update
- added image
- updated Docs links
* Clueboard 66% HotSwap: corrected matrix and Configurator data
- removed k31 and k84 from LAYOUT
- both appear to be unsupported for this PCB according to images on clueboard.co
- updated block comment mock-ups to match changes
- rebuilt info.json file
- delete removed keys from default keymap.c
* Clueboard 66% HotSwap: readme update
- fix make example
- updated Docs links
* Clueboard 66% HotSwap: 66_ansi keymap update
Updated to use #include QMK_KEYBOARD_H
* Clueboard 60% refactor
- renamed layout macro KEYMAP to LAYOUT_all
- renamed layout macro KEYMAP_AEK to LAYOUT_aek
- removed redundant KC_TRNS definitions from keymaps
- all keymaps now use #include QMK_KEYBOARD_H
* Clueboard 17%: refactor
* Clueboard 17%: Configurator support
* Clueboard 17%: update Docs links in readme
* Cleanup the 2x1800 files
* Update Clueboard 60% to standard matrix
* Update the clueboard default keymaps
* Refresh and update clueboard 17
* Add the 66% hotswap to Clueboard's readme
* Clarify the 66% hotswap's readme
* change the image to imgur
* Update the clueboard 66 to follow modern standards
* update clueboard 66_hotswap to follow modern practices
* Move the logo to imgur
* update clueboard/card to follow modern practices
* remove clueboard/66 as a valid make target
* Address comments in #4902
* fix user keymaps after the changes
* Added TGR Alice keyboard support
This keyboard uses ps2avrGB firmware, so I used the same matrix
Bootmapper Client was using and was able to flash it appropriately.
* Refactor alice to use QMK core
* Fixed markdown line breaks on TGR Alice readme
* handwired/retro_refit: refactor
- retro_refit.h
- updated to use #pragma once include guard
- refactored layout macro to not auto-prepend KC_ to keycodes
- renamed to LAYOUT (from KEYMAP)
- aligned for readability
- default keymap.c
- now uses #include QMK_KEYBOARD_H
- removed unused fn_actions and action_get_macro blocks
* handwired/retro_refit: Configurator support
* handwired/retro_refit: readme update
Updated readme to format of current QMK template.
* Create ISO HHKB keymapping for GH60
* Add media controls to Fn layer
* Use M(x) instead of F(x), add Copyright text
* Create initial firmware for TMO50
* Correct year and author
* Fix repos README
* Remove unnecessary code
* Change include guard in tmo50.h
* Plain60: remove redundant include guard from plain60.h
Superseded by #pragma once.
* Plain60: add Docs links to readme file
* Plain60: Configurator support
* new hhkb keymap implementing movement layer + comfort features
* Apply suggestions from code review
Co-Authored-By: schaefer-dev <schaefer.dev@gmail.com>
* removed deprecated function action_get_macro and mousewheel configs that are no longer used
* handwired/reddot: refactor
- reddot.h
- updated to use #pragma once include guard
- renamed layout macro KEYMAP to LAYOUT
- refactored arguments to more closely resemble physical layout
- aligned for readability
- keymaps/default/keymap.c
- now uses #include QMK_KEYBOARD_H
- updated include path for keymap_french.h
- refactored to use short keycodes
- aligned for readability
* handwired/reddot: Configurator support
* handwired/reddot: readme update
- update readme to current QMK template
- add KLE permalink to my best guess at the layout
* Initial support for TKC Candybar
* Correct FN layer issue
Both shift keys were overloaded. Moved Caps Lock to FN + C.
* Update keyboard description in config.h.
* Info.json
* Update project information
* Update keyboards/candybar/readme.md
Co-Authored-By: TerryMathews <terry@terrymathews.net>
* handwired/qc60: refactor and Configurator update
- correct layout macro name (LAYOUT_ANSI_DEFAULT to LAYOUT_ansi_default)
- add layout data for remaining layout macros
- correct ISO layout macros (neither had a split left Shift)
- refactor LAYOUT_iso_alt (place KC_NUHS key on home row; consistent with LAYOUT_iso_default)
- proto.h refactored to use #pragma once include guard
* handwired/qc60: keymap refactor
- delete redundant KC_TRNS and KC_NO aliases
* handwired/qc60: readme update
- update header (made consistent with QMK template)
- update Docs links (Newbs Guide; grammar)
* handwired/ortho60: Configurator update
- correct labels for Up and Right keys
- add layout data for LAYOUT_1x2uC
* handwired/ortho60: readme update
- update readme file to use QMK template
* handwired/ortho60: deleted DEFAULT_FOLDER rule
Not needed as the keyboard currently has no revisions.
* TKC1800: refactor
- tkc1800.h
- updated to use #pragma once
- visual alignment
- update config.h files to use #pragma once
- update all keymaps to use #include QMK_KEYBOARD_H
- delete redundant mod mask, KC_TRNS, and KC_NO definitions
- reformat keymap layers for readability
- add block comment for Function layer in default keymap
- delete commented action_get_macro code blocks (deprecated function)
- update files to better conform with QMK coding conventions
- update smt keymap to use set_single_persistent_default_layer (instead of persistent_default_layer_set)
- replace instances of `?=` with `=` in rules.mk
* TKC1800: Configurator visual fixes
- correct key sizes and positioning
- reformat file so each physical key object has its own line for readability
- update and add `label` keys for readability
* TKC1800: readme update
- fix image gallery link
- update Hardware Supported and Hardware Availability lines
- update make example (add :default suffix)
- update QMK Docs links (Newbs Guide; grammar)
* Add missing semicolons to smt keymap
Discovered the LAYOUT_compact macro didn't compile in QMK Configurator. Realized the reason for that was that it automatically prepends `KC_` to every keycode received.
Renamed the macro to LAYOUT_kc so Configurator will ignore it.
Also changed the file to use the #pragma once include guard because I was in here anyway.
* change VENDOR_ID, PRODUCT_ID, and DEVICE_VER as step one in getting VIA support
* fix v1 product id
* VIA doesn't use the version, so we need to encode it into PRODUCT_ID
* Eliminate separate slave loop
Both master and slave run the standard keyboard_task main loop now.
* Refactor i2c/serial specific code
Simplify some of the preprocessor mess by using common function names.
* Fix missing #endif
* Move direct pin mapping support from miniaxe to split_common
For boards with more pins than sense--sorry, switches.
* Reordering and reformatting only
* Don't run matrix_scan_quantum on slave side
* Clean up the offset/slaveOffset calculations
* Cut undebounced matrix size in half
* Refactor debouncing
* Minor fixups
* Split split_common transport and debounce code into their own files
Can now be replaced with custom versions per keyboard using
CUSTOM_TRANSPORT = yes and CUSTOM_DEBOUNCE = yes
* Refactor debounce for non-split keyboards too
* Update handwired/xealous to build using new split_common
* Fix debounce breaking basic test
* Dodgy method to allow a split kb to only include one of i2c/serial
SPLIT_TRANSPORT = serial or SPLIT_TRANSPORT = i2c will include only
that driver code in the binary.
SPLIT_TRANSPORT = custom (or anything else) will include neither, the
keyboard must supply it's own code
if SPLIT_TRANSPORT is not defined then the original behaviour (include
both avr i2c and serial code) is maintained.
This could be better but it would require explicitly updating all the
existing split keyboards.
* Enable LTO to get lets_split/sockets under the line
* Add docs for SPLIT_TRANSPORT, CUSTOM_MATRIX, CUSTOM_DEBOUNCE
* Remove avr-specific sei() from split matrix_setup
Not needed now that slave doesn't have a separate main loop.
Both sides (on avr) call sei() in lufa's main() after exiting
keyboard_setup().
* Fix QUANTUM_LIB_SRC references and simplify SPLIT_TRANSPORT.
* Add comments and fix formatting.
* Crawlpad: delete kbfirmware JSON file
* Crawlpad: refactor
- config.h and crawlpad.h updated to use #pragma once method
- layout macro renamed from KEYMAP to LAYOUT_ortho_4x4
- default keymap now uses #include QMK_KEYBOARD_H
- deleted deprecated action_get_macro function
- cleanup rules.mk file
- add LAYOUTS = ortho_4x4 to rules.mk
* Crawlpad: Configurator support
* Crawlpad: readme update
- update image link to direct link
- fully update Docs link line
- delete reference to deleted kbfirmware JSON file
* Add encoder support
* Add VIA support to Iris Rev. 3
* Update pinout and disable mouse keys to free up space
* Rollout VIA support to all Iris revisions
* Update default keymap
* Update vendor ID
* Add kbd6x:konstantin keymap
* Prevent tap dance from sending LShift as a weak mod in KBD6X
* Move config.h and rules.mk definitions into userspace
* Add UC_WIN to UNICODE_SELECTED_MODES
* Temporarily use Bootmagic until Command is fixed
* Move common behavior from keyboards into userspace
* Update kbd6x:konstantin keymap and userspace
* Make a RCTRL layer in kbd6x:konstantin
* Make KC_ESC turn off layers
* KC_ESC turns L_FN off only if it was locked on
* Add missing record->event.pressed checks
* Move numpad toggling logic into function
* Disable Bootmagic, enable KEYBOARD_SHARED_EP with Command
* Add support for THE50
A 50% custom keyboard designed and produced by LazyDesigners
* THE50 code-improvement
Implement the changes suggested by noroadsleft.
* changed ortho keymaps and userspace
* changed prime_o keymap
* changed userspace
* optimized keymaps and userspace
* removed permissive hold as it doesn't seem to do anything
* defined TAPPING_TERM in userspace config.h
* Commited into clean repo
* Gergo initial release
* Cleaning up
* Cleaning up
* Update readme.md
* Updated image, fixed MD formatting, added clairity
* Moved keymap to keyboard subdir, modified rules.mk
* Cleaned header guards
* Cleaned header guards. Read the rest of the PR comments
* Update keyboards/gergo/keymaps/default/keymap.c
Co-Authored-By: germ <jeremythegeek@gmail.com>
* Update keyboards/gergo/readme.md
Co-Authored-By: germ <jeremythegeek@gmail.com>
* Moved makefiles to keymap mod-area-thingy-with-overrides
* Update rules.mk
Slow the roll on the defaults while I wait for merge
* Update rules.mk
* Cleaning cleaning cleaning
* More housekeeping. Keeping optdefs
* moved keyboard specfic conf to config.h. Can we merge yet?
* added info.json
* adds proton c base
* fixes custom matrix include
* adds readme.md
* initial proton coversion, no pin mapping
* start of mcu selection
* add pin mapping and sweet16 test
* add at90 to list
* disable backlight, fix d7
* update flag names
* doc updates
* proton c update for mcu selection
* initial prime_o commit
* Cleaned up comments, other things.
* Update bakingpy 4x12 keymap and add test mode for debugging/development (#4810)
* Keymap: ave-63's iris layout (#4812)
* Updated keymap to use standard seven-underscore KC_TRNS notation
* initial prime_o commit
* Cleaned up comments, other things.
* Updated keymap to use standard seven-underscore KC_TRNS notation
* Downbubble: Configurator fix
Fix the visual key alignment and some typos.
* Downbubble: refactor
Rename layout macros:
- LAYOUT_downbubble_standard to LAYOUT_standard
- LAYOUT_downbubble_splitbackspace to LAYOUT_split_bs
- LAYOUT_downbubble_splitrightshift to LAYOUT_split_rshift
- LAYOUT_downbubble_splitnumpad to LAYOUT_split_numpad
- LAYOUT_downbubble_spliteverything to LAYOUT_all
Microsecond (us) delays are now handled by a busy wait loop according to MCU frequency. This replaces the system counter method which had an overhead of around 12us.
TC5 device and supporting routines removed as it was the old us delay counter.
wait_ms is now properly a macro to CLK_delay_ms.
wait_us is now properly a macro to CLK_delay_us.
Removed CLK_get_us as it has no use.
All calls to CLK_get_ms() have been replaced by timer_read64() with corrected typing.
All calls to CLK_delay_ms() have been replaced by wait_ms().
All calls to CLK_delay_us() have been replaced by wait_us() and timings verified or updated as needed after review on scope.
Corrected typing of variables using 64bit ms timer readings if needed.
* initial commit, this now mostly works
- RGB controls work
- Dynamic keymap still broken due to eeprom
- Via works
* STM32 eeprom update
- Update EEPROM emulation library to handle 8bit data like AVR.
- This library also allows for multiple page pairs resulting in greater EEPROM size flexibility
* hs60 changes
* HS60 hhkb added
* Update keyboards/hs60/v2/config.h
Co-Authored-By: yiancar <yiangosyiangou@cytanet.com.cy>
* Fractal: layout macro cleanup
Removed KEYMAP alias for LAYOUT_preonic_mit. Alias was unused, and the terminology usage is deprecated.
* Fractal: readme cleanup
Updated the line containing the documentation links in the readme.
* Fractal: disable preonic_mit community layout
QMK doesn't have a preonic_mit community layout at this time.
Disables preonic_mit as an option for community layout. Can be re-enabled when the layout is added.
* Numbrero: fix Configurator mismatch
Key object order in info.json didn't match the layout macro, leading to keys being assigned out-of-sequence.
* Numbrero: tidy
- white space changes in numbrero.h (alignment/readability/QMK conventions)
- minor changes to readme.md (grammar, mostly)
* Tradestation: tidy code
- correct JSON syntax on info.json
- visual key alignment on info.json
- white space changes on rules.mk and tradestation.h (readability/QMK conventions)
* Tradestation: readme refactor
Modify readme.md to more closely match QMK template.
* Tradestation: readme update
Update The Board podcast link for libsyn.
* S65-X: remove S65-Plus support
The original QMK codebase for the Sentraq S65-X actually supported both the S65-X and the S65-Plus. In the interim, the S65-Plus has been broken off into its own directory.
This commit removes support for the S65-Plus from the `keyboards/s65_x/` directory, as that code has been superseded by the code in the S65-Plus directory (`keyboards/s65_plus/`).
- deleted S65-Plus layout macros from s65_x.h and info.json
- deleted s65plus keymap directory
- removed references to the unused column pins
- removed the two unused columns for the switch matrices
- renamed switch K300 in LAYOUT_ansi to K301 (reflects matrix position)
- renamed switch K214 in LAYOUT_iso to K114 (reflects matrix position)
* S65-X: keymap refactor
- all keymaps now use #include QMK_KEYBOARD_H
- default and iso keymaps refactored for readability
- deleted redundant KC_TRNS and KC_NO keycode definitions from smt keymap
* S65-X: readme update
- updated Hardware Availability link
- updated Docs links
* S65-Plus: add LAYOUT_iso data
Adds LAYOUT_iso macro to s65_plus.h and info.json, and an ISO layout version of the default keymap.
* S65-Plus: refactor default keymap
- refactor for alignment/readability
- removed fn_actions code block
- add empty process_record_user block
* S65-Plus: readme update
- Hardware Availability link is now a hyperlink
- updated Docs links
* S65-X: enable 65_ansi and 65_iso community layouts
Thi commit allows the Sentraq S65-X to use the 65_ansi and 65_iso community layouts.
- LAYOUT_ansi renamed to LAYOUT_65_ansi
- LAYOUT_iso renamed to LAYOUT_65_iso
- added LAYOUTS rule to rules.mk
