add a git-submodule make target.

* copied mjt keymaps from archive

* All mjt boards now compile

* fixed jd45-mjt breathing

* Updates to fix SpaceFN but not tested yet.

* Still missing either spacebar or an adjacent keypress.

* Debugging rigged up for use with hid_listen.

* Reverted the default keymap to use tap_layer_key rather than custom.  Moved custom approach to keymap_debug.c

* Fixed the lower-left side of the keymap, which needed more spacers due to the matrix being directly put into the array rather than using the keymap function.

* Cleaned up JD45 keymap that uses tapkey.

* Redid minivan keymap with numsym rather than raise/lower.
Untested.

* Created my MJT keymap for HHKB
Enabled dynamic macros and moved
somoe of the shortcuts around.

* Minor keymap fixes to make them compile without errors.

* Added home/end to right arrow cluster on DYN layer.

* Added more keys to fn and dyn layers.

* It wasn't using my custom layer last time somehow...?  Now it will.

* Compiled and installed at end of day on 8/23

* Moved macros to FKEY layer because Adjust was too hard to get into and out of without some sort of feedback.

* Fixed volume controls... were reversed and disabled.

* Added F13-F15 back to fkeys layer in Minivan

* Created new Planck Keymap that uses the NumSym and FKeys layer approach like the Minivan.

* Removed DYN layer.

* Fixed diagram in planck numsym.

* Cleanup for pull request.

* Roadkit flip phone warning.

* Replaced PLAY_NOTES_ARRAY to PLAY_SONG

* reset the submodules

* checked out specific commits for submodules

* Removed debugging from JD45 shared config.h

* Moved custom rules.mk to apropriate keymap

Reset the shared rules.mk file.

* Trailing return issue in rules.mk

Gotta make for a smooth pull request :-)

.gitignore

@@ -44,4 +44,8 @@ util/Win_Check_Output.txt
 *.gif
 
 # Do not ignore MiniDox left/right hand eeprom files
-!keyboards/minidox/*.eep 
+!keyboards/minidox/*.eep 
+
+# things travis sees
+secrets.tar
+id_rsa_*

.travis.yml

@@ -29,6 +29,7 @@ addons:
     - binutils-arm-none-eabi
     - libnewlib-arm-none-eabi
     - diffutils
+    - dos2unix
 after_success: 
   bash util/travis_compiled_push.sh
 notifications:

Dockerfile

@@ -25,4 +25,4 @@ ENV keymap=default
 
 VOLUME /qmk
 WORKDIR /qmk
-CMD make clean; make;
+CMD make clean ; make keyboard=${keyboard} subproject=${subproject} keymap=${keymap}

Makefile

@@ -314,11 +314,21 @@ define PARSE_SUBPROJECT
     ifneq ($$(CURRENT_SP),allsp)
         # get a list of all keymaps
         KEYMAPS := $$(notdir $$(patsubst %/.,%,$$(wildcard $(ROOT_DIR)/keyboards/$$(CURRENT_KB)/keymaps/*/.)))
+        LAYOUTS :=
+        $$(eval -include $(ROOT_DIR)/keyboards/$$(CURRENT_KB)/rules.mk)
+        KEYBOARD_LAYOUTS := $$(LAYOUTS)
         ifneq ($$(CURRENT_SP),)
             # if the subproject is defined, then also look for keymaps inside the subproject folder
             SP_KEYMAPS := $$(notdir $$(patsubst %/.,%,$$(wildcard $(ROOT_DIR)/keyboards/$$(CURRENT_KB)/$$(CURRENT_SP)/keymaps/*/.)))
             KEYMAPS := $$(sort $$(KEYMAPS) $$(SP_KEYMAPS))
+	        # $$(eval -include $(ROOT_DIR)/keyboards/$$(CURRENT_KB)/$$(CURRENT_SP)/rules.mk)
+        	# KEYBOARD_LAYOUTS := $$(sort $$(KEYBOARD_LAYOUTS) $$(LAYOUTS))
         endif
+
+        LAYOUT_KEYMAPS :=
+        $$(foreach LAYOUT,$$(KEYBOARD_LAYOUTS),$$(eval LAYOUT_KEYMAPS += $$(notdir $$(patsubst %/.,%,$$(wildcard $(ROOT_DIR)/layouts/*/$$(LAYOUT)/*/.)))))
+        
+        KEYMAPS := $$(sort $$(KEYMAPS) $$(LAYOUT_KEYMAPS))
         # if the rule after removing the start of it is empty (we haven't specified a kemap or target)
         # compile all the keymaps
         ifeq ($$(RULE),)
@@ -541,6 +551,10 @@ test: test-all
 .PHONY: test-clean
 test-clean: test-all-clean
 
+git-submodule:
+	git submodule sync --recursive
+	git submodule update --init --recursive
+
 ifdef SKIP_VERSION
 SKIP_GIT := yes
 endif

book.json

@@ -8,7 +8,8 @@
       "hints",
       "page-toc",
       "terminal",
-      "toolbar"
+      "toolbar",
+      "bulk-redirect"
     ],
     "pluginsConfig": {
       "edit-link": {
@@ -35,6 +36,10 @@
             "url": "https://github.com/qmk/qmk_firmware"
           }
         ]
+      }, 
+      "bulk-redirect": {
+          "basepath": "/",
+          "redirectsFile": "docs/redirects.json"
       }
     },
     "root": "./docs/"

build_keyboard.mk

@@ -39,6 +39,7 @@ ifneq ("$(wildcard $(KEYBOARD_C))","")
 else
     $(error "$(KEYBOARD_C)" does not exist)
 endif
+OPT_DEFS += -DKEYBOARD_$(KEYBOARD)
 
 ifneq ($(SUBPROJECT),)
     SUBPROJECT_PATH := keyboards/$(KEYBOARD)/$(SUBPROJECT)
@@ -97,11 +98,13 @@ else ifneq ("$(wildcard $(MAIN_KEYMAP_C))","")
     -include $(MAIN_KEYMAP_PATH)/Makefile
     KEYMAP_C := $(MAIN_KEYMAP_C)
     KEYMAP_PATH := $(MAIN_KEYMAP_PATH)
+else ifneq ($(LAYOUTS),)
+    include build_layout.mk
 else
-    $(error "$(MAIN_KEYMAP_C)/keymap.c" does not exist)
+    $(error Could not find keymap)
+    # this state should never be reached
 endif
 
-
 # Object files directory
 #     To put object files in current directory, use a dot (.), do NOT make
 #     this an empty or blank macro!
@@ -157,7 +160,10 @@ endif
 
 OUTPUTS := $(KEYMAP_OUTPUT) $(KEYBOARD_OUTPUT)
 $(KEYMAP_OUTPUT)_SRC := $(SRC)
-$(KEYMAP_OUTPUT)_DEFS := $(OPT_DEFS) $(GFXDEFS) -DQMK_KEYBOARD=\"$(KEYBOARD)\" -DQMK_KEYMAP=\"$(KEYMAP)\"
+$(KEYMAP_OUTPUT)_DEFS := $(OPT_DEFS) $(GFXDEFS) \
+-DQMK_KEYBOARD=\"$(KEYBOARD)\" -DQMK_KEYBOARD_H=\"$(KEYBOARD).h\" -DQMK_KEYBOARD_CONFIG_H=\"$(KEYBOARD_PATH)/config.h\" \
+-DQMK_KEYMAP=\"$(KEYMAP)\" -DQMK_KEYMAP_H=\"$(KEYMAP).h\" -DQMK_KEYMAP_CONFIG_H=\"$(KEYMAP_PATH)/config.h\" \
+-DQMK_SUBPROJECT=\"$(SUBPROJECT)\" -DQMK_SUBPROJECT_H=\"$(SUBPROJECT).h\" -DQMK_SUBPROJECT_CONFIG_H=\"$(SUBPROJECT_PATH)/config.h\"
 $(KEYMAP_OUTPUT)_INC :=  $(VPATH) $(EXTRAINCDIRS)
 $(KEYMAP_OUTPUT)_CONFIG := $(CONFIG_H)
 $(KEYBOARD_OUTPUT)_SRC := $(CHIBISRC) $(GFXSRC)

build_layout.mk

@@ -0,0 +1,18 @@
+LAYOUTS_PATH := layouts
+LAYOUTS_REPOS := $(patsubst %/,%,$(sort $(dir $(wildcard $(LAYOUTS_PATH)/*/))))
+
+define SEARCH_LAYOUTS_REPO
+    LAYOUT_KEYMAP_PATH := $$(LAYOUTS_REPO)/$$(LAYOUT)/$$(KEYMAP)
+    LAYOUT_KEYMAP_C := $$(LAYOUT_KEYMAP_PATH)/keymap.c
+    ifneq ("$$(wildcard $$(LAYOUT_KEYMAP_C))","")
+        -include $$(LAYOUT_KEYMAP_PATH)/rules.mk
+        KEYMAP_C := $$(LAYOUT_KEYMAP_C)
+        KEYMAP_PATH := $$(LAYOUT_KEYMAP_PATH)
+    endif
+endef
+
+define SEARCH_LAYOUTS
+    $$(foreach LAYOUTS_REPO,$$(LAYOUTS_REPOS),$$(eval $$(call SEARCH_LAYOUTS_REPO)))
+endef
+
+$(foreach LAYOUT,$(LAYOUTS),$(eval $(call SEARCH_LAYOUTS)))

docs/README.md

@@ -12,7 +12,7 @@ Otherwise, you can either download it directly ([zip](https://github.com/qmk/qmk
 
 ## How to compile {#how-to-compile}
 
-Before you are able to compile, you'll need to [install an environment](build_environment_setup.md) for AVR or/and ARM development. Once that is complete, you'll use the `make` command to build a keyboard and keymap with the following notation:
+Before you are able to compile, you'll need to [install an environment](getting_started_build_tools.md) for AVR or/and ARM development. Once that is complete, you'll use the `make` command to build a keyboard and keymap with the following notation:
 
     make planck-rev4-default
 

docs/_summary.md

@@ -12,6 +12,7 @@
   * [Keymap](faq_keymap.md)
 
 * [Features](features.md)
+  * [Layouts](feature_layouts.md)
   * [Common Shortcuts](feature_common_shortcuts.md)
   * [Backlight](feature_backlight.md)
   * [Bootmagic](feature_bootmagic.md)
@@ -23,6 +24,7 @@
   * [PS2 Mouse](feature_ps2_mouse.md)
   * [Space Cadet](space_cadet_shift.md)
   * [Tap Dance](tap_dance.md)
+  * [Audio](feature_audio.md)
   * [Thermal Printer](feature_thermal_printer.md)
   * [Stenography](stenography.md)
   * [Unicode](unicode.md)

docs/faq_build.md

@@ -1,6 +1,6 @@
 # Frequently Asked Build Questions
 
-This page covers questions about building QMK. If you have not yet you should read the [Build Environment Setup](build_environment_setup.md) and [Make Instructions](make_instructions.md) guides.
+This page covers questions about building QMK. If you have not yet you should read the [Build Environment Setup](getting_started_build_tools.md) and [Make Instructions](make_instructions.md) guides.
 
 ## Can't program on Linux
 You will need proper permission to operate a device. For Linux users see udev rules below. Easy way is to use `sudo` command, if you are not familiar with this command check its manual with `man sudo` or this page on line.

docs/feature_layouts.md

@@ -0,0 +1,77 @@
+# Layouts: Using a keymap with multiple keyboards
+
+The `layouts/` folder contains different physical key layouts that can apply to different keyboards. 
+
+```
+layouts/
++ default/
+| + 60_ansi/
+| | + readme.md
+| | + layout.json
+| | + a_good_keymap/
+| | | + keymap.c
+| | | + readme.md
+| | | + config.h
+| | | + rules.mk
+| | + <keymap folder>/
+| | + ...
+| + <layout folder>/
++ community/
+| + <layout folder>/
+| + ...
+```
+
+The `layouts/default/` and `layouts/community/` are two examples of layout "repositories" - currently `default` will contain all of the information concerning the layout, and one default keymap named `default_<layout>`, for users to use as a reference. `community` contains all of the community keymaps, with the eventual goal of being split-off into a separate repo for users to clone into `layouts/`. QMK searches through all folders in `layouts/`, so it's possible to have multiple reposistories here. 
+
+Each layout folder is named (`[a-z0-9_]`) after the physical aspects of the layout, in the most generic way possible, and contains a `readme.md` with the layout to be defined by the keyboard:
+
+```md
+# 60_ansi
+
+   LAYOUT_60_ansi
+```
+
+New names should try to stick to the standards set by existing layouts, and can be discussed in the PR/Issue.
+
+## Supporting a layout
+
+For a keyboard to support a layout, the variable (`[a-z0-9_]`) must be defined in it's `<keyboard>.h`, and match the number of arguments/keys (and preferrably the physical layout):
+
+    #define LAYOUT_60_ansi KEYMAP_ANSI
+
+The folder name must be added to the keyboard's `rules.mk`:
+
+    LAYOUTS = 60_ansi
+
+`LAYOUTS` can be appended in the subproject's `rules.mk`:
+
+    LAYOUTS += 60_iso
+
+but the `LAYOUT_<layout>` variable must be defined in `<subproject>.h` as well.
+
+## Tips for making layouts keyboard-agnostic
+
+Instead of using `#include "planck.h"`, you can use this line to include whatever `<keyboard>.h` (`<subproject>.h` should not be included here) file that is being compiled:
+
+    #include QMK_KEYBOARD_H
+
+In your config.h, you can also use this variable to include the keyboard's `config.h`:
+
+    #include QMK_KEYBOARD_CONFIG_H
+
+If you want to keep some keyboard-specific code, you can use these variables to escape it with an `#ifdef` statement:
+
+* `KEYBOARD_<keyboard>`
+* `SUBPROJECT_<subproject>`
+
+For example:
+
+```c
+#ifdef KEYBOARD_planck
+    #ifdef SUBPROJECT_rev4
+        planck_rev4_function();
+    #endif
+#endif
+```
+
+Note that the names are lowercase and match the folder/file names for the keyboard/subproject exactly.

docs/how_keyboards_work.md

@@ -51,7 +51,7 @@ layout is set to QWERTY, a sample of the matching table is as follow:
 
 ## Back to the firmware
 
-As the layout is generally fixed (unless you create your own), the firmware can actually call a keycode by its layout name directly to ease things for you. This is exactly what is done here with `KC_A` actually representing `0x04` in QWERTY. The full list can be found in `keycode.txt`.
+As the layout is generally fixed (unless you create your own), the firmware can actually call a keycode by its layout name directly to ease things for you. This is exactly what is done here with `KC_A` actually representing `0x04` in QWERTY. The full list can be found in [keycodes](keycodes.md).
 
 ## List of Characters You Can Send
 

docs/redirects.json

@@ -0,0 +1,12 @@
+{
+    "redirects": [
+            {
+                "from": "build_environment_setup.html",
+                "to": "getting_started_build_tools.html"
+            },
+            {
+                "from": "make_instructions.html",
+                "to": "getting_started_make_guide.html"
+            }
+        ]
+}

docs/stenography.md

@@ -12,11 +12,11 @@ To use Plover with QMK just enable NKRO and optionally adjust your layout if you
 
 ## Plover with Steno Protocol
 
-Plover also understands the language of several steno machines. QMK can speak a couple of these languages, TX Bolt and GeminiRP. An example layout can be found in `planck/keymaps/steno`.
+Plover also understands the language of several steno machines. QMK can speak a couple of these languages, TX Bolt and GeminiPR. An example layout can be found in `planck/keymaps/steno`.
 
 When QMK speaks to Plover over a steno protocol Plover will not use the keyboard as input. This means that you can switch back and forth between a standard keyboard and your steno keyboard, or even switch layers from Plover to standard and back without needing to activate/deactive Plover.
 
-In this mode Plover expects to speak with a steno machine over a serial port so QMK will present itself to the operating system as a virtual serial port in addition to a keyboard. By default QMK will speak the TX Bolt protocol but can be switched to GeminiRP; the last protocol used is stored in non-volatile memory so QMK will use the same protocol on restart.
+In this mode Plover expects to speak with a steno machine over a serial port so QMK will present itself to the operating system as a virtual serial port in addition to a keyboard. By default QMK will speak the TX Bolt protocol but can be switched to GeminiPR; the last protocol used is stored in non-volatile memory so QMK will use the same protocol on restart.
 
 > Note: Due to hardware limitations you may not be able to run both a virtual serial port and mouse emulation at the same time.
 
@@ -24,13 +24,13 @@ In this mode Plover expects to speak with a steno machine over a serial port so
 
 TX Bolt communicates the status of 24 keys over a very simple protocol in variable-sized (1-5 byte) packets.
 
-### GeminiRP
+### GeminiPR
 
-GeminiRP encodes 42 keys into a 6-byte packet. While TX Bolt contains everything that is necessary for standard stenography, GeminiRP opens up many more options, including supporting non-English theories.
+GeminiPR encodes 42 keys into a 6-byte packet. While TX Bolt contains everything that is necessary for standard stenography, GeminiPR opens up many more options, including supporting non-English theories.
 
 ## Configuring QMK for Steno
 
-Firstly, enable steno in your keymap's Makefile. You should also diable mousekeys to prevent conflicts.
+Firstly, enable steno in your keymap's Makefile. You may also need disable mousekeys, extra keys, or another USB endpoint to prevent conflicts. The builtin USB stack for some processors only supports a certain number of USB endpoints and the virtual serial port needed for steno fills 3 of them.
 
 ```Makefile
 STENO_ENABLE = yes
@@ -60,9 +60,9 @@ On the display tab click 'Open stroke display'. With Plover disabled you should
 
 As defined in `keymap_steno.h`.
 
-> Note: TX Bolt does not support the full set of keys. The TX Bolt implementation in QMK will map the GeminiRP keys to the nearest TX Bolt key so that one key map will work for both.
+> Note: TX Bolt does not support the full set of keys. The TX Bolt implementation in QMK will map the GeminiPR keys to the nearest TX Bolt key so that one key map will work for both.
 
-|GeminiRP|TX Bolt|Steno Key|
+|GeminiPR|TX Bolt|Steno Key|
 |--------|-------|-----------|
 |`STN_N1`|`STN_NUM`|Number bar #1|
 |`STN_N2`|`STN_NUM`|Number bar #2|
@@ -102,7 +102,7 @@ As defined in `keymap_steno.h`.
 |`STN_SR`|`STN_SR`| `-S`|
 |`STN_DR`|`STN_DR`| `-D`|
 |`STN_ZR`|`STN_ZR`| `-Z`|
-|`STN_FN`|| (GeminiRP only)|
-|`STN_RES1`||(GeminiRP only)|
-|`STN_RES2`||(GeminiRP only)|
-|`STN_PWR`||(GeminiRP only)|
+|`STN_FN`|| (GeminiPR only)|
+|`STN_RES1`||(GeminiPR only)|
+|`STN_RES2`||(GeminiPR only)|
+|`STN_PWR`||(GeminiPR only)|

keyboards/9key/9key.c

@@ -0,0 +1,5 @@
+#include "9key.h"
+
+void matrix_init_kb(void) {
+	matrix_init_user();
+}

keyboards/9key/9key.h

@@ -0,0 +1,17 @@
+#ifndef NINEKEY_H
+#define NINEKEY_H
+
+#include "quantum.h"
+
+#define KEYMAP( \
+      k00, k01, k02, \
+      k10, k11, k12, \
+      k20, k21, k22  \
+) \
+{ \
+    { k00, k01, k02 }, \
+    { k10, k11, k12 }, \
+    { k20, k21, k22 } \
+} 
+
+#endif

keyboards/9key/Makefile

@@ -1,5 +1,3 @@
-SUBPROJECT_DEFAULT = ez
-
 ifndef MAKEFILE_INCLUDED
 	include ../../Makefile
 endif

keyboards/9key/config.h

@@ -0,0 +1,52 @@
+/*
+Copyright 2012 Jun Wako <wakojun@gmail.com>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#ifndef CONFIG_H
+#define CONFIG_H
+
+#include "config_common.h"
+
+/* USB Device descriptor parameter */
+#define VENDOR_ID       0xFEED
+#define PRODUCT_ID      0x0007
+#define DEVICE_VER 		0x0001
+#define MANUFACTURER    Bishop Keyboards
+#define PRODUCT         9Key
+#define DESCRIPTION     Bishop Keyboards 9Key // Charleston, SC Meetup Handout
+
+/* key matrix size */
+#define MATRIX_ROWS 3
+#define MATRIX_COLS 3
+
+/* 9Key PCB default pin-out */
+#define MATRIX_ROW_PINS { D1, D0, D4 }
+#define MATRIX_COL_PINS { F4, F5, F6 }
+#define UNUSED_PINS
+
+/* ws2812 RGB LED */
+#define RGB_DI_PIN F7
+#define RGBLIGHT_TIMER
+#define RGBLED_NUM 1    // Number of LEDs
+#define ws2812_PORTREG  PORTD
+#define ws2812_DDRREG   DDRD
+
+/* COL2ROW or ROW2COL */
+#define DIODE_DIRECTION COL2ROW
+
+#define TAPPING_TERM 200
+
+#endif

keyboards/9key/keymaps/default/keymap.c

@@ -0,0 +1,65 @@
+#include "9key.h"
+
+// Tap Dance Declarations
+enum {
+  ENT_5 = 0,
+  ZERO_7
+};
+
+// Macro Declarations
+enum {
+  DBL_0 = 0
+};
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+
+/* LAYER 0
+ * ,-----------------------.
+ * |   1   |   2   |   3   |
+ * |-------+-------+-------|
+ * |   4   | 5/ENT |   6   | Dbl Tap 5 for Enter
+ * |-------+-------+-------|
+ * |  7/0  |   8   | 9/FN  | 7/0 = Dbl Tap 7 for 0  -  9/FN = Hold 9 for FN
+ * `-----------------------'
+ */
+[0] = KEYMAP( \
+  KC_1,       KC_2,      KC_3,       \
+  KC_4,       TD(ENT_5), KC_6,       \
+  TD(ZERO_7), KC_8,      LT(1, KC_9) \
+),
+
+/* LAYER 1
+ * ,-----------------------.
+ * |  ESC  |   +   |   -   |
+ * |-------+-------+-------|
+ * |  BSPC |   *   |   /   |
+ * |-------+-------+-------|
+ * |  00   |   .   |       |
+ * `-----------------------'
+ */
+[1] = KEYMAP( \
+  KC_ESC,   KC_PLUS, KC_MINS, \
+  KC_BSPC,  KC_ASTR, KC_SLSH, \
+  M(DBL_0), KC_DOT,  KC_TRNS  \
+)
+
+};
+
+qk_tap_dance_action_t tap_dance_actions[] = {
+  [ENT_5] = ACTION_TAP_DANCE_DOUBLE(KC_5, KC_ENT),
+  [ZERO_7] = ACTION_TAP_DANCE_DOUBLE(KC_7, KC_0)
+};
+
+const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) {
+  if (record->event.pressed) {
+      switch(id) {
+          case DBL_0:
+              SEND_STRING("00");
+              return false;
+      }
+  }
+  return MACRO_NONE;
+};
+
+void matrix_init_user(void) {
+}

keyboards/9key/readme.md

@@ -0,0 +1,17 @@
+9key
+===
+
+![9key](http://i.imgur.com/a3wWc7h.jpg)
+![9KeyBehind](http://i.imgur.com/2PWf5wu.jpg)
+
+A compact minipad (3x3) keyboard made and sold by Bishop Keyboards.
+
+Keyboard Maintainer: QMK Community  
+Hardware Supported: 9key PCB, Pro Micro ATmega32U4  
+Hardware Availability: [BishopKeyboards.com](http://bishopkeyboards.com/)
+
+Make example for this keyboard (after setting up your build environment):
+
+    make 9key-default
+
+See [build environment setup](https://docs.qmk.fm/build_environment_setup.html) then the [make instructions](https://docs.qmk.fm/make_instructions.html) for more information.

keyboards/9key/rules.mk

@@ -0,0 +1,69 @@
+# MCU name
+#MCU = at90usb1287
+MCU = atmega32u4
+
+# Processor frequency.
+#     This will define a symbol, F_CPU, in all source code files equal to the
+#     processor frequency in Hz. You can then use this symbol in your source code to
+#     calculate timings. Do NOT tack on a 'UL' at the end, this will be done
+#     automatically to create a 32-bit value in your source code.
+#
+#     This will be an integer division of F_USB below, as it is sourced by
+#     F_USB after it has run through any CPU prescalers. Note that this value
+#     does not *change* the processor frequency - it should merely be updated to
+#     reflect the processor speed set externally so that the code can use accurate
+#     software delays.
+F_CPU = 16000000
+
+#
+# LUFA specific
+#
+# Target architecture (see library "Board Types" documentation).
+ARCH = AVR8
+
+# Input clock frequency.
+#     This will define a symbol, F_USB, in all source code files equal to the
+#     input clock frequency (before any prescaling is performed) in Hz. This value may
+#     differ from F_CPU if prescaling is used on the latter, and is required as the
+#     raw input clock is fed directly to the PLL sections of the AVR for high speed
+#     clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
+#     at the end, this will be done automatically to create a 32-bit value in your
+#     source code.
+#
+#     If no clock division is performed on the input clock inside the AVR (via the
+#     CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
+F_USB = $(F_CPU)
+
+# Interrupt driven control endpoint task(+60)
+OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
+
+
+# Boot Section Size in *bytes*
+#   Teensy halfKay   512
+#   Teensy++ halfKay 1024
+#   Atmel DFU loader 4096
+#   LUFA bootloader  4096
+#   USBaspLoader     2048
+OPT_DEFS += -DBOOTLOADER_SIZE=4096
+
+# Build Options
+#   change to "no" to disable the options, or define them in the Makefile in 
+#   the appropriate keymap folder that will get included automatically
+#
+BOOTMAGIC_ENABLE = no       # Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE = yes       # Mouse keys(+4700)
+EXTRAKEY_ENABLE = yes       # Audio control and System control(+450)
+CONSOLE_ENABLE = no         # Console for debug(+400)
+COMMAND_ENABLE = no        # Commands for debug and configuration
+NKRO_ENABLE = yes            # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+BACKLIGHT_ENABLE = no      # Enable keyboard backlight functionality
+MIDI_ENABLE = no            # MIDI controls
+AUDIO_ENABLE = no           # Audio output on port C6
+UNICODE_ENABLE = yes         # Unicode
+BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
+RGBLIGHT_ENABLE = no        # Enable WS2812 RGB underlight.
+API_SYSEX_ENABLE = yes
+TAP_DANCE_ENABLE = yes
+
+# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
+SLEEP_LED_ENABLE = no    # Breathing sleep LED during USB suspend

keyboards/alps64/alps64.h

@@ -20,12 +20,30 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #include "quantum.h"
 
 /* Alps64 keymap definition macro */
+
 #define KEYMAP( \
     K36, K37, K46, K47, K56, K57, K66, K67, K76, K77, K06, K07, K17, K26, K27, \
     K34, K35, K44, K45, K54, K55, K64, K65, K75, K05, K15, K16, K25, K24, \
     K32, K33, K43, K52, K53, K63, K73, K74, K03, K04, K13, K14, K23, \
     K31, K41, K42, K51, K61, K62, K71, K72, K01, K02, K11, K12, K21, K22, \
     K30, K40, K50,           K60,                     K70, K00, K10, K20  \
+) { \
+    { K00, K01, K02, K03, K04, K05, K06, K07 }, \
+    { K10, K11, K12, K13, K14, K15, K16, K17 }, \
+    { K20, K21, K22, K23, K24, K25, K26, K27 }, \
+    { K30, K31, K32, K33, K34, K35, K36, K37 }, \
+    { K40, K41, K42, K43, K44, K45, K46, K47 }, \
+    { K50, K51, K52, K53, K54, K55, K56, K57 }, \
+    { K60, K61, K62, K63, K64, K65, K66, K67 }, \
+    { K70, K71, K72, K73, K74, K75, K76, K77 } \
+}
+
+#define KC_KEYMAP( \
+    K36, K37, K46, K47, K56, K57, K66, K67, K76, K77, K06, K07, K17, K26, K27, \
+    K34, K35, K44, K45, K54, K55, K64, K65, K75, K05, K15, K16, K25, K24, \
+    K32, K33, K43, K52, K53, K63, K73, K74, K03, K04, K13, K14, K23, \
+    K31, K41, K42, K51, K61, K62, K71, K72, K01, K02, K11, K12, K21, K22, \
+    K30, K40, K50,           K60,                     K70, K00, K10, K20  \
 ) { \
     { KC_##K00, KC_##K01, KC_##K02, KC_##K03, KC_##K04, KC_##K05, KC_##K06, KC_##K07 }, \
     { KC_##K10, KC_##K11, KC_##K12, KC_##K13, KC_##K14, KC_##K15, KC_##K16, KC_##K17 }, \

keyboards/alps64/keymaps/default/keymap.c

@@ -2,7 +2,7 @@
 
 const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
     /* 0: qwerty */
-    KEYMAP( \
+    KC_KEYMAP( \
         GRV, 1,   2,   3,   4,   5,   6,   7,   8,   9,   0,   MINS,EQL, NUHS, BSPC, \
         TAB, Q,   W,   E,   R,   T,   Y,   U,   I,   O,   P,   LBRC,RBRC,BSLS, \
         CAPS,A,   S,   D,   F,   G,   H,   J,   K,   L,   SCLN,QUOT,ENT,  \

keyboards/amj40/keymaps/fabian/keymap.c

@@ -179,7 +179,7 @@ bool process_record_user(uint16_t keycode, keyrecord_t *record) {
     case QWERTY:
       if (record->event.pressed) {
         #ifdef AUDIO_ENABLE
-          PLAY_NOTE_ARRAY(tone_qwerty, false, 0);
+          PLAY_SONG(tone_qwerty);
         #endif
         persistent_default_layer_set(1UL<<_QWERTY);
       }
@@ -188,7 +188,7 @@ bool process_record_user(uint16_t keycode, keyrecord_t *record) {
     case COLEMAK:
       if (record->event.pressed) {
         #ifdef AUDIO_ENABLE
-          PLAY_NOTE_ARRAY(tone_colemak, false, 0);
+          PLAY_SONG(tone_colemak);
         #endif
         persistent_default_layer_set(1UL<<_COLEMAK);
       }
@@ -197,7 +197,7 @@ bool process_record_user(uint16_t keycode, keyrecord_t *record) {
     case DVORAK:
       if (record->event.pressed) {
         #ifdef AUDIO_ENABLE
-          PLAY_NOTE_ARRAY(tone_dvorak, false, 0);
+          PLAY_SONG(tone_dvorak);
         #endif
         persistent_default_layer_set(1UL<<_DVORAK);
       }

keyboards/amj60/amj60.h

@@ -63,6 +63,8 @@
     {k40, k41, k42, XXX, XXX, k45, XXX, XXX, XXX, XXX, k4a, k4b, k4c, k4d}  \
 }
 
+#define LAYOUT_60_ansi KEYMAP_ANSI
+
 /* AMJ60 HHKB matrix layout
    * ,------------------------------------------------------------.
    * | 00 |01| 02| 03| 04| 05| 06| 07| 08| 09| 0a| 0b| 0c| 0d| 49 |
@@ -119,6 +121,7 @@
     {k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b, k3c, XXX}, \
     {k40, k41, k42, XXX, XXX, k45, XXX, XXX, XXX, XXX, k4a, k4b, k4c, k4d}  \
 }
+
 /* ISO w/ split right shift key matrix layout
    * ,-----------------------------------------------------------.
    * | 00 |01| 02| 03| 04| 05| 06| 07| 08| 09| 0a| 0b| 0c| 0d    |

keyboards/amj60/readme.md

@@ -3,9 +3,9 @@ AMJ60
 
 A 60% keyboard.
 
-Keyboard Maintainer: QMK Community
-Hardware Supported: AMJ60
-Hardware Availability: https://geekhack.org/index.php?topic=77636.0
+Keyboard Maintainer: QMK Community  
+Hardware Supported: AMJ60  
+Hardware Availability: https://geekhack.org/index.php?topic=77636.0  
 
 Make example for this keyboard (after setting up your build environment):
 

keyboards/amj60/rules.mk

@@ -64,3 +64,5 @@ MIDI_ENABLE      = no  # MIDI controls
 AUDIO_ENABLE     = no
 UNICODE_ENABLE   = no  # Unicode
 BLUETOOTH_ENABLE = no  # Enable Bluetooth with the Adafruit EZ-Key HID
+
+LAYOUTS = 60_ansi

keyboards/amjpad/readme.md

@@ -3,9 +3,9 @@ AMJ Pad
 
 A DIY Keypad Kit
 
-Keyboard Maintainer: QMK Community
-Hardware Supported: AMJ Pad
-Hardware Availability: https://geekhack.org/index.php?topic=83546.0
+Keyboard Maintainer: QMK Community  
+Hardware Supported: AMJ Pad  
+Hardware Availability: https://geekhack.org/index.php?topic=83546.0  
 
 Make example for this keyboard (after setting up your build environment):
 

keyboards/atomic/atomic.h

@@ -24,4 +24,20 @@
     { K40, K41, KC_NO, K43, KC_NO, KC_NO, K46, KC_NO, KC_NO, KC_NO, K4A, K4B,   K4C,   K4D,   K4E }  \
 }
 
+#define KEYMAP_GRID( \
+    K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, K0E,\
+    K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, K1E,\
+    K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C, K2D, K2E,\
+    K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, K3D, K3E,\
+    K40, K41, K42, K43, K44, K45, K46, K47, K48, K49, K4A, K4B, K4C, K4D, K4E \
+) { \
+    { K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, K0E }, \
+    { K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, K1E }, \
+    { K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C, K2D, K2E }, \
+    { K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, K3D, K3E }, \
+    { K40, K41, K42, K43, K44, K45, K46, K47, K48, K49, K4A, K4B, K4C, K4D, K4E }  \
+}
+
+#define LAYOUT_ortho_5x15 KEYMAP_GRID
+
 #endif

keyboards/atomic/keymaps/pvc/keymap.c

@@ -471,7 +471,7 @@ const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt)
                     else
                     {
                         audio_on();
-                        PLAY_NOTE_ARRAY(tone_audio_on, false, STACCATO);
+                        PLAY_SONG(tone_audio_on);
                     }
             }
             break;
@@ -486,7 +486,7 @@ const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt)
                     }
                     else
                     {
-                    PLAY_NOTE_ARRAY(tone_music_on, false, STACCATO);
+                    PLAY_SONG(tone_music_on);
                     layer_on(LAYER_MUSIC);
                     }
             }
@@ -496,7 +496,7 @@ const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt)
             {
                 #ifdef AUDIO_ENABLE
                     voice_iterate();
-                    PLAY_NOTE_ARRAY(music_scale, false, STACCATO);
+                    PLAY_SONG(music_scale);
                 #endif
             }
             break;
@@ -506,7 +506,7 @@ const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt)
             {
                 #ifdef AUDIO_ENABLE
                     voice_deiterate();
-                    PLAY_NOTE_ARRAY(music_scale, false, STACCATO);
+                    PLAY_SONG(music_scale);
                 #endif
             }
             break;
@@ -550,32 +550,32 @@ void led_set_user(uint8_t usb_led)
         if ((usb_led & (1<<USB_LED_CAPS_LOCK)) && !(old_usb_led & (1<<USB_LED_CAPS_LOCK)))
         {
                 // If CAPS LK LED is turning on...
-                PLAY_NOTE_ARRAY(tone_caps_on,  false, LEGATO);
+                PLAY_SONG(tone_caps_on);
         }
         else if (!(usb_led & (1<<USB_LED_CAPS_LOCK)) && (old_usb_led & (1<<USB_LED_CAPS_LOCK)))
         {
                 // If CAPS LK LED is turning off...
-                PLAY_NOTE_ARRAY(tone_caps_off, false, LEGATO);
+                PLAY_SONG(tone_caps_off);
         }
         else if ((usb_led & (1<<USB_LED_NUM_LOCK)) && !(old_usb_led & (1<<USB_LED_NUM_LOCK)))
         {
                 // If NUM LK LED is turning on...
-                PLAY_NOTE_ARRAY(tone_numlk_on,  false, LEGATO);
+                PLAY_SONG(tone_numlk_on);
         }
         else if (!(usb_led & (1<<USB_LED_NUM_LOCK)) && (old_usb_led & (1<<USB_LED_NUM_LOCK)))
         {
                 // If NUM LED is turning off...
-                PLAY_NOTE_ARRAY(tone_numlk_off, false, LEGATO);
+                PLAY_SONG(tone_numlk_off);
         }
         else if ((usb_led & (1<<USB_LED_SCROLL_LOCK)) && !(old_usb_led & (1<<USB_LED_SCROLL_LOCK)))
         {
                 // If SCROLL LK LED is turning on...
-                PLAY_NOTE_ARRAY(tone_scroll_on,  false, LEGATO);
+                PLAY_SONG(tone_scroll_on);
         }
         else if (!(usb_led & (1<<USB_LED_SCROLL_LOCK)) && (old_usb_led & (1<<USB_LED_SCROLL_LOCK)))
         {
                 // If SCROLL LED is turning off...
-                PLAY_NOTE_ARRAY(tone_scroll_off, false, LEGATO);
+                PLAY_SONG(tone_scroll_off);
         }
     }
 
@@ -586,29 +586,29 @@ void led_set_user(uint8_t usb_led)
 void startup_user()
 {
     _delay_ms(10); // gets rid of tick
-    PLAY_NOTE_ARRAY(tone_my_startup, false, STACCATO);
+    PLAY_SONG(tone_my_startup);
 }
 
 void shutdown_user()
 {
-    PLAY_NOTE_ARRAY(tone_my_goodbye, false, STACCATO);
+    PLAY_SONG(tone_my_goodbye);
     _delay_ms(2000);
     stop_all_notes();
 }
 
 void audio_on_user(void)
 {
-	PLAY_NOTE_ARRAY(tone_audio_on, false, STACCATO);
+	PLAY_SONG(tone_audio_on);
 }
 
 void music_on_user(void)
 {
-	PLAY_NOTE_ARRAY(tone_music_on, false, STACCATO);
+	PLAY_SONG(tone_music_on);
 }
 
 void music_scale_user(void)
 {
-	PLAY_NOTE_ARRAY(music_scale, false, STACCATO);
+	PLAY_SONG(music_scale);
 }
 
 #endif /* AUDIO_ENABLE */

keyboards/atomic/rules.mk

@@ -66,4 +66,6 @@ BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
 RGBLIGHT_ENABLE = no        # Enable WS2812 RGB underlight.  Do not enable this with audio at the same time.
 
 # Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
-SLEEP_LED_ENABLE = no    # Breathing sleep LED during USB suspend
+SLEEP_LED_ENABLE = no    # Breathing sleep LED during USB suspend
+
+LAYOUTS = ortho_5x15

keyboards/atreus/rules.mk

@@ -78,5 +78,5 @@ UNICODE_ENABLE = YES 		# Unicode
 
 USB = /dev/cu.usbmodem1411
 
-upload: build
-	$(ATREUS_UPLOAD_COMMAND)
+# upload: build
+# 	$(ATREUS_UPLOAD_COMMAND)

keyboards/chibios_test/stm32_f072_onekey/rules.mk

@@ -35,7 +35,4 @@ ARMV = 6
 
 # Build Options
 #   comment out to disable the options.
-#
-ifndef QUANTUM_DIR
-	include ../../../Makefile
-endif
+#

keyboards/chibios_test/stm32_f103_onekey/rules.mk

@@ -44,9 +44,4 @@ ARMV = 7
 # http://www.st.com/web/en/resource/technical/document/application_note/CD00167594.pdf
 # This also requires a patch to chibios:
 #   <tmk_dir>/tmk_core/tool/chibios/ch-bootloader-jump.patch
-#STM32_BOOTLOADER_ADDRESS = 0x1FFFC800
-
-
-ifndef QUANTUM_DIR
-	include ../../../Makefile
-endif
+#STM32_BOOTLOADER_ADDRESS = 0x1FFFC800

keyboards/chibios_test/teensy_lc_onekey/rules.mk

@@ -42,8 +42,4 @@ MCU  = cortex-m0plus
 
 # ARM version, CORTEX-M0/M1 are 6, CORTEX-M3/M4/M7 are 7
 # I.e. 6 for Teensy LC; 7 for Teensy 3.x
-ARMV = 6
-
-ifndef QUANTUM_DIR
-	include ../../../Makefile
-endif
+ARMV = 6

keyboards/clueboard/rev1/rules.mk

@@ -1,5 +1 @@
-BACKLIGHT_ENABLE = no
-
-ifndef QUANTUM_DIR
-	include ../../../Makefile
-endif
+BACKLIGHT_ENABLE = no

keyboards/clueboard/rev2/rules.mk

@@ -1,5 +1 @@
-BACKLIGHT_ENABLE = yes
-
-ifndef QUANTUM_DIR
-	include ../../../Makefile
-endif
+BACKLIGHT_ENABLE = yes

keyboards/cluecard/keymaps/default/keymap.c

@@ -36,13 +36,13 @@ void action_function(keyrecord_t *record, uint8_t id, uint8_t opt) {
 	if (record->event.pressed) {
 		switch (id) {
 			case 0:
-				PLAY_NOTE_ARRAY(tone_startup, false, 0);
+				PLAY_SONG(tone_startup);
 				break;
 			case 1:
-				PLAY_NOTE_ARRAY(music_scale, false, 0);
+				PLAY_SONG(music_scale);
 				break;
 			case 2:
-				PLAY_NOTE_ARRAY(tone_goodbye, false, 0);
+				PLAY_SONG(tone_goodbye);
 				break;
 		}
 	}

keyboards/converter/usb_usb/README.md

@@ -1,80 +1,70 @@
 USB to USB keyboard protocol converter
 ======================================
-Original code from Hasu's TMK firmware. Ported to QMK by Coloneljesus.
+A small device to connect between your USB keyboard and your PC that makes (almost) every keyboard fully programmable.
+Original code from the [TMK firmware](https://github.com/tmk/tmk_keyboard/tree/master/converter/usb_usb). Ported to QMK by [Balz Guenat](https://github.com/BalzGuenat).
 
-This port has been tested only on the Pro Micro variant described in the next section.
+Keyboard Maintainer: [Balz Guenat](https://github.com/BalzGuenat)
+Hardware Supported: [Hasu's USB-USB converter](https://geekhack.org/index.php?topic=69169.0), [Pro Micro + USB Host Shield](https://geekhack.org/index.php?topic=80421.0), maybe more
+Hardware Availability: [GH thread](https://geekhack.org/index.php?topic=72052.0), self-built
 
-See for detail and discussion.
+Make example for this keyboard (after setting up your build environment):
+
+    make converter-usb_usb-default
+
+See [build environment setup](https://docs.qmk.fm/build_environment_setup.html) then the [make instructions](https://docs.qmk.fm/make_instructions.html) for more information.
+
+Troubleshooting & Known Issues
+------------------------------
+The Pro Micro variant runs at 8MHz, hence the following line in `usb_usb/rules.mk`:
+`F_CPU ?= 8000000`
+If the firmware doesn't work, try changing that line to
+`F_CPU ?= 16000000`
+or override the `F_CPU` variable in the `rules.mk` of your keymap.
+
+Getting the Hardware
+--------------------
+There are two options to get a converter: You can buy one from Hasu or build one yourself.
+
+### Buy a Converter
+You can buy a fully assembled converter from me here:
 https://geekhack.org/index.php?topic=69169.0
 
-
-Hardware requirement
---------------------
-There are two options.
-
-### TMK USB-USB Converter
-You can buy a fully assembled converter from me here.
-
-    https://geekhack.org/index.php?topic=69169.0
-
-### Arduino Leonardo + Circuit@Home USB Host Shield 2.0
+### Build one yourself using Arduino Leonardo + Circuit@Home USB Host Shield 2.0
 Buying Arduino Leonardo and USB Host Shield 2.0(from Circuit@home) will be better, you won't need even soldering iron.
-
-    http://arduino.cc/en/Main/ArduinoBoardLeonardo 
-    https://www.circuitsathome.com/products-page/arduino-shields/usb-host-shield-2-0-for-arduino-assembled/
+http://arduino.cc/en/Main/ArduinoBoardLeonardo
+https://www.circuitsathome.com/arduino_usb_host_shield_projects/
 
 Other compatible boards like Arduino's Shield will also work well but I think Sparkfun's needs to be modified.
-
-    http://arduino.cc/en/Main/ArduinoUSBHostShield
-    https://www.sparkfun.com/products/9947
+http://arduino.cc/en/Main/ArduinoUSBHostShield
+https://www.sparkfun.com/products/9947
 
 Also Pro Micro 3.3V(not Mini) or Teensy with mini host shield will work with some fixes on signal/power routing.
+[Build guide](https://geekhack.org/index.php?topic=80421.0)
+https://www.circuitsathome.com/arduino_usb_host_shield_projects/
+https://www.sparkfun.com/products/12587
+https://www.pjrc.com/teensy/td_libs_USBHostShield.html
 
-    https://www.circuitsathome.com/products-page/arduino-shields/usb-host-shield-for-arduino-pro-mini
-    https://www.sparkfun.com/products/12587
-    https://www.pjrc.com/teensy/td_libs_USBHostShield.html
-
-
-
-Build firmware
---------------
-Follow normal QMK build instructions to get a binary file. Flashing depends on you hardware.
-
-Limitation
+Limitations
 ----------
 Only supports 'HID Boot protocol'.
-
 Note that the converter can host only USB "boot protocol" keyboard(6KRO), not NKRO, it is possible to support NKRO keyboard but you will need to write HID report parser for that. Every NKRO keyboard can have different HID report and it is difficult to support all kind of NKRO keyboards in the market.
 
-
-
-Keymap editor
--------------
-You can editor keymap and download firmware with web brwoser.
-
-- http://www.tmk-kbd.com/tmk_keyboard/editor/unimap/?usb_usb
-
-
-
-Update
-------
-2014/12/11  Added Hub support(confirmed with HHKB pro2)
-2016/09/10  Unimap editor support
-2016/10/18  Fix LED state at startup
-2017/08/16  Port to QMK
-
-
-Resource
+Resources
 --------
-USB Host Sheild 2.0
-    https://www.circuitsathome.com/products-page/arduino-shields/usb-host-shield-2-0-for-arduino
-    https://www.circuitsathome.com/products-page/arduino-shields/usb-host-shield-for-arduino-pro-mini
-USB Host Sheild 2.0 source
+Hasu's main thread for the converter
+    https://geekhack.org/index.php?topic=69169.0
+Build guide for the Pro Micro variant
+    https://geekhack.org/index.php?topic=80421.0
+Original TMK version of the converter
+    https://github.com/tmk/tmk_keyboard/tree/master/converter/usb_usb
+USB Host Shield 2.0
+    https://www.circuitsathome.com/arduino_usb_host_shield_projects/
+USB Host Shield 2.0 source
     https://github.com/felis/USB_Host_Shield_2.0
-Arduino USB Host Shield(with bootst converter)
+Arduino USB Host Shield (with bootst converter)
     http://arduino.cc/en/Main/ArduinoUSBHostShield
 Arduino source
-    https://github.com/arduino/Arduino/hardware/arduino/{cores,variants}
+    https://github.com/arduino/Arduino
 Initial release of TMK USB-USB converter
     https://geekhack.org/index.php?topic=33057.msg653549#msg653549
     http://deskthority.net/workshop-f7/is-remapping-a-usb-keyboard-using-teensy-possible-t2841-30.html#p74854

keyboards/deltasplit75/keymaps/itsaferbie/config.h

@@ -29,3 +29,10 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #ifdef SUBPROJECT_protosplit
     #include "../../protosplit/config.h"
 #endif
+
+#undef RGBLED_NUM
+#define RGBLIGHT_ANIMATIONS
+#define RGBLED_NUM 20
+#define RGBLIGHT_HUE_STEP 8
+#define RGBLIGHT_SAT_STEP 8
+#define RGBLIGHT_VAL_STEP 8

keyboards/deltasplit75/keymaps/itsaferbie/keymap.c

@@ -24,16 +24,16 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
      * |----------------------------------------------------------------------|
      * |Shif|   |  Z|  X|  C|  V|  B|   N|  M|  ,|  .|  /|Shift |      Up| End|
      * |----------------------------------------------------------------------|
-     * |CapsLo|Gui |Alt |Sp |Mod |      Sp| Alt| Gui| Ctrl|    | Lef| Dow| Rig|
+     * |CapsLo|Gui |Alt |Mod|Sp |      Sp| Alt| Gui| Ctrl|    | Lef| Dow| Rig|
      * `----------------------------------------------------------------------'
      */
 	KEYMAP_V2(
 		KC_ESC,  KC_F1,   KC_F2,   KC_F3,  KC_F4, KC_F5,  KC_F6,            KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,  KC_PSCR,  KC_INS,  KC_DEL, 
 		KC_GRV,  KC_1,    KC_2,    KC_3,   KC_4,  KC_5,   KC_6,             KC_7,    KC_8,    KC_9,    KC_0,    KC_MINS, KC_EQL,  KC_BSPC,  KC_TRNS, KC_HOME, // KC_TRNS is the unneeded key in the split backspace.
 		KC_TAB,  KC_Q,    KC_W,    KC_E,   KC_R,  KC_T,                     KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,    KC_LBRC, KC_RBRC,  KC_BSLS, KC_PGUP, 
-		KC_LCTL, KC_A,    KC_S,    KC_D,   KC_F,  KC_G,                     KC_H,    KC_J,    KC_K,    KC_L,    KC_SCLN, KC_QUOT, KC_TRNS,  KC_ENT,  KC_PGDN, // KC_TRNS is unneeded ISO enter key. 
+		KC_LCTL, KC_A,    KC_S,    KC_D,   KC_F,  KC_G,                     KC_H,    KC_J,    KC_K,    KC_L,    KC_SCLN, KC_QUOT, KC_TRNS,  KC_ENT,  KC_PGDN, // KC_TRNS is uneeded ISO enter key. 
 		KC_LSFT, KC_TRNS, KC_Z,    KC_X,   KC_C,  KC_V,   KC_B,             KC_B,    KC_N,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH, KC_RSFT,  KC_UP,   KC_END,  // KC_TRNS is uneeded ISO layout key.
-		KC_CAPS, KC_LGUI, KC_LALT,         KC_SPC, MO(1),                   KC_SPC,  KC_RALT, KC_RGUI, KC_RCTL,                   KC_LEFT,  KC_DOWN, KC_RGHT),
+		KC_CAPS, KC_LGUI, KC_LALT,         MO(1), KC_SPC,                   KC_SPC,  KC_RALT, KC_RGUI, KC_RCTL,                   KC_LEFT,  KC_DOWN, KC_RGHT),
 
 	KEYMAP_V2(
 		RGB_TOG, RGB_HUI, RGB_SAI, RGB_VAI, KC_TRNS, KC_TRNS, KC_TRNS,      KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, RESET, 

keyboards/deltasplit75/matrix.c

@@ -21,9 +21,7 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #include <stdint.h>
 #include <stdbool.h>
 #include <avr/io.h>
-#include <avr/wdt.h>
-#include <avr/interrupt.h>
-#include <util/delay.h>
+#include "wait.h"
 #include "print.h"
 #include "debug.h"
 #include "util.h"
@@ -31,6 +29,7 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #include "split_util.h"
 #include "pro_micro.h"
 #include "config.h"
+#include "timer.h"
 
 #ifdef USE_I2C
 #  include "i2c.h"
@@ -38,14 +37,29 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #  include "serial.h"
 #endif
 
-#ifndef DEBOUNCE
-#  define DEBOUNCE	5
+#ifndef DEBOUNCING_DELAY
+#   define DEBOUNCING_DELAY 5
 #endif
 
+#if (DEBOUNCING_DELAY > 0)
+    static uint16_t debouncing_time;
+    static bool debouncing = false;
+#endif
+
+#if (MATRIX_COLS <= 8)
+#    define print_matrix_header()  print("\nr/c 01234567\n")
+#    define print_matrix_row(row)  print_bin_reverse8(matrix_get_row(row))
+#    define matrix_bitpop(i)       bitpop(matrix[i])
+#    define ROW_SHIFTER ((uint8_t)1)
+#else
+#    error "Currently only supports 8 COLS"
+#endif
+static matrix_row_t matrix_debouncing[MATRIX_ROWS];
+
 #define ERROR_DISCONNECT_COUNT 5
 
-static uint8_t debouncing = DEBOUNCE;
-static const int ROWS_PER_HAND = MATRIX_ROWS/2;
+#define ROWS_PER_HAND (MATRIX_ROWS/2)
+
 static uint8_t error_count = 0;
 
 static const uint8_t row_pins[MATRIX_ROWS] = MATRIX_ROW_PINS;
@@ -55,11 +69,19 @@ static const uint8_t col_pins[MATRIX_COLS] = MATRIX_COL_PINS;
 static matrix_row_t matrix[MATRIX_ROWS];
 static matrix_row_t matrix_debouncing[MATRIX_ROWS];
 
-static matrix_row_t read_cols(void);
-static void init_cols(void);
-static void unselect_rows(void);
-static void select_row(uint8_t row);
-
+#if (DIODE_DIRECTION == COL2ROW)
+    static void init_cols(void);
+    static bool read_cols_on_row(matrix_row_t current_matrix[], uint8_t current_row);
+    static void unselect_rows(void);
+    static void select_row(uint8_t row);
+    static void unselect_row(uint8_t row);
+#elif (DIODE_DIRECTION == ROW2COL)
+    static void init_rows(void);
+    static bool read_rows_on_col(matrix_row_t current_matrix[], uint8_t current_col);
+    static void unselect_cols(void);
+    static void unselect_col(uint8_t col);
+    static void select_col(uint8_t col);
+#endif
 __attribute__ ((weak))
 void matrix_init_quantum(void) {
     matrix_init_kb();
@@ -118,33 +140,54 @@ void matrix_init(void)
     }
 
     matrix_init_quantum();
+
 }
 
 uint8_t _matrix_scan(void)
 {
-    // Right hand is stored after the left in the matirx so, we need to offset it
     int offset = isLeftHand ? 0 : (ROWS_PER_HAND);
+#if (DIODE_DIRECTION == COL2ROW)
+    // Set row, read cols
+    for (uint8_t current_row = 0; current_row < ROWS_PER_HAND; current_row++) {
+#       if (DEBOUNCING_DELAY > 0)
+            bool matrix_changed = read_cols_on_row(matrix_debouncing+offset, current_row);
+
+            if (matrix_changed) {
+                debouncing = true;
+                debouncing_time = timer_read();
+                PORTD ^= (1 << 2);
+            }
+
+#       else
+            read_cols_on_row(matrix+offset, current_row);
+#       endif
 
-    for (uint8_t i = 0; i < ROWS_PER_HAND; i++) {
-        select_row(i);
-        _delay_us(30);  // without this wait read unstable value.
-        matrix_row_t cols = read_cols();
-        if (matrix_debouncing[i+offset] != cols) {
-            matrix_debouncing[i+offset] = cols;
-            debouncing = DEBOUNCE;
-        }
-        unselect_rows();
     }
 
-    if (debouncing) {
-        if (--debouncing) {
-            _delay_ms(1);
-        } else {
+#elif (DIODE_DIRECTION == ROW2COL)
+    // Set col, read rows
+    for (uint8_t current_col = 0; current_col < MATRIX_COLS; current_col++) {
+#       if (DEBOUNCING_DELAY > 0)
+            bool matrix_changed = read_rows_on_col(matrix_debouncing+offset, current_col);
+            if (matrix_changed) {
+                debouncing = true;
+                debouncing_time = timer_read();
+            }
+#       else
+             read_rows_on_col(matrix+offset, current_col);
+#       endif
+
+    }
+#endif
+
+#   if (DEBOUNCING_DELAY > 0)
+        if (debouncing && (timer_elapsed(debouncing_time) > DEBOUNCING_DELAY)) {
             for (uint8_t i = 0; i < ROWS_PER_HAND; i++) {
                 matrix[i+offset] = matrix_debouncing[i+offset];
             }
+            debouncing = false;
         }
-    }
+#   endif
 
     return 1;
 }
@@ -200,9 +243,7 @@ int serial_transaction(void) {
 
 uint8_t matrix_scan(void)
 {
-    int ret = _matrix_scan();
-
-
+    uint8_t ret = _matrix_scan();
 
 #ifdef USE_I2C
     if( i2c_transaction() ) {
@@ -226,20 +267,17 @@ uint8_t matrix_scan(void)
         TXLED0;
         error_count = 0;
     }
-
     matrix_scan_quantum();
-
     return ret;
 }
 
 void matrix_slave_scan(void) {
     _matrix_scan();
 
-    int offset = (isLeftHand) ? 0 : (MATRIX_ROWS / 2);
+    int offset = (isLeftHand) ? 0 : ROWS_PER_HAND;
 
 #ifdef USE_I2C
     for (int i = 0; i < ROWS_PER_HAND; ++i) {
-        /* i2c_slave_buffer[i] = matrix[offset+i]; */
         i2c_slave_buffer[i] = matrix[offset+i];
     }
 #else // USE_SERIAL
@@ -286,33 +324,141 @@ uint8_t matrix_key_count(void)
     return count;
 }
 
-static void  init_cols(void)
+#if (DIODE_DIRECTION == COL2ROW)
+
+static void init_cols(void)
 {
-    for(int x = 0; x < MATRIX_COLS; x++) {
-        _SFR_IO8((col_pins[x] >> 4) + 1) &=  ~_BV(col_pins[x] & 0xF);
-        _SFR_IO8((col_pins[x] >> 4) + 2) |= _BV(col_pins[x] & 0xF);
+    for(uint8_t x = 0; x < MATRIX_COLS; x++) {
+        uint8_t pin = col_pins[x];
+        _SFR_IO8((pin >> 4) + 1) &= ~_BV(pin & 0xF); // IN
+        _SFR_IO8((pin >> 4) + 2) |=  _BV(pin & 0xF); // HI
     }
 }
 
-static matrix_row_t read_cols(void)
+static bool read_cols_on_row(matrix_row_t current_matrix[], uint8_t current_row)
 {
-    matrix_row_t result = 0;
-    for(int x = 0; x < MATRIX_COLS; x++) {
-        result |= (_SFR_IO8(col_pins[x] >> 4) & _BV(col_pins[x] & 0xF)) ? 0 : (1 << x);
-    }
-    return result;
-}
+    // Store last value of row prior to reading
+    matrix_row_t last_row_value = current_matrix[current_row];
 
-static void unselect_rows(void)
-{
-    for(int x = 0; x < ROWS_PER_HAND; x++) {
-        _SFR_IO8((row_pins[x] >> 4) + 1) &=  ~_BV(row_pins[x] & 0xF);
-        _SFR_IO8((row_pins[x] >> 4) + 2) |= _BV(row_pins[x] & 0xF);
+    // Clear data in matrix row
+    current_matrix[current_row] = 0;
+
+    // Select row and wait for row selecton to stabilize
+    select_row(current_row);
+    wait_us(30);
+
+    // For each col...
+    for(uint8_t col_index = 0; col_index < MATRIX_COLS; col_index++) {
+
+        // Select the col pin to read (active low)
+        uint8_t pin = col_pins[col_index];
+        uint8_t pin_state = (_SFR_IO8(pin >> 4) & _BV(pin & 0xF));
+
+        // Populate the matrix row with the state of the col pin
+        current_matrix[current_row] |=  pin_state ? 0 : (ROW_SHIFTER << col_index);
     }
+
+    // Unselect row
+    unselect_row(current_row);
+
+    return (last_row_value != current_matrix[current_row]);
 }
 
 static void select_row(uint8_t row)
 {
-    _SFR_IO8((row_pins[row] >> 4) + 1) |=  _BV(row_pins[row] & 0xF);
-    _SFR_IO8((row_pins[row] >> 4) + 2) &= ~_BV(row_pins[row] & 0xF);
+    uint8_t pin = row_pins[row];
+    _SFR_IO8((pin >> 4) + 1) |=  _BV(pin & 0xF); // OUT
+    _SFR_IO8((pin >> 4) + 2) &= ~_BV(pin & 0xF); // LOW
 }
+
+static void unselect_row(uint8_t row)
+{
+    uint8_t pin = row_pins[row];
+    _SFR_IO8((pin >> 4) + 1) &= ~_BV(pin & 0xF); // IN
+    _SFR_IO8((pin >> 4) + 2) |=  _BV(pin & 0xF); // HI
+}
+
+static void unselect_rows(void)
+{
+    for(uint8_t x = 0; x < ROWS_PER_HAND; x++) {
+        uint8_t pin = row_pins[x];
+        _SFR_IO8((pin >> 4) + 1) &= ~_BV(pin & 0xF); // IN
+        _SFR_IO8((pin >> 4) + 2) |=  _BV(pin & 0xF); // HI
+    }
+}
+
+#elif (DIODE_DIRECTION == ROW2COL)
+
+static void init_rows(void)
+{
+    for(uint8_t x = 0; x < ROWS_PER_HAND; x++) {
+        uint8_t pin = row_pins[x];
+        _SFR_IO8((pin >> 4) + 1) &= ~_BV(pin & 0xF); // IN
+        _SFR_IO8((pin >> 4) + 2) |=  _BV(pin & 0xF); // HI
+    }
+}
+
+static bool read_rows_on_col(matrix_row_t current_matrix[], uint8_t current_col)
+{
+    bool matrix_changed = false;
+
+    // Select col and wait for col selecton to stabilize
+    select_col(current_col);
+    wait_us(30);
+
+    // For each row...
+    for(uint8_t row_index = 0; row_index < ROWS_PER_HAND; row_index++)
+    {
+
+        // Store last value of row prior to reading
+        matrix_row_t last_row_value = current_matrix[row_index];
+
+        // Check row pin state
+        if ((_SFR_IO8(row_pins[row_index] >> 4) & _BV(row_pins[row_index] & 0xF)) == 0)
+        {
+            // Pin LO, set col bit
+            current_matrix[row_index] |= (ROW_SHIFTER << current_col);
+        }
+        else
+        {
+            // Pin HI, clear col bit
+            current_matrix[row_index] &= ~(ROW_SHIFTER << current_col);
+        }
+
+        // Determine if the matrix changed state
+        if ((last_row_value != current_matrix[row_index]) && !(matrix_changed))
+        {
+            matrix_changed = true;
+        }
+    }
+
+    // Unselect col
+    unselect_col(current_col);
+
+    return matrix_changed;
+}
+
+static void select_col(uint8_t col)
+{
+    uint8_t pin = col_pins[col];
+    _SFR_IO8((pin >> 4) + 1) |=  _BV(pin & 0xF); // OUT
+    _SFR_IO8((pin >> 4) + 2) &= ~_BV(pin & 0xF); // LOW
+}
+
+static void unselect_col(uint8_t col)
+{
+    uint8_t pin = col_pins[col];
+    _SFR_IO8((pin >> 4) + 1) &= ~_BV(pin & 0xF); // IN
+    _SFR_IO8((pin >> 4) + 2) |=  _BV(pin & 0xF); // HI
+}
+
+static void unselect_cols(void)
+{
+    for(uint8_t x = 0; x < MATRIX_COLS; x++) {
+        uint8_t pin = col_pins[x];
+        _SFR_IO8((pin >> 4) + 1) &= ~_BV(pin & 0xF); // IN
+        _SFR_IO8((pin >> 4) + 2) |=  _BV(pin & 0xF); // HI
+    }
+}
+
+#endif

keyboards/deltasplit75/readme.md

@@ -1,137 +1,18 @@
 DeltaSplit75
 ======
 
-This readme and most of the code are from https://github.com/ahtn/tmk_keyboard/ and https://github.com/qmk/qmk_firmware/tree/master/keyboards/lets_split
+A split 75% keyboard made by xyxjj. [More info on qmk.fm](http://qmk.fm/deltasplit75/)
 
-Credit to ahtn and wootpatoot for work on the split keyboard firmware
+Keyboard Maintainer: [xyxjj](https://github.com/xyxjj)  
+Hardware Supported: Pro Micro  
+Hardware Availability: Group Buy
 
-Split keyboard firmware for Arduino Pro Micro or other ATmega32u4
-based boards.
+Make example for this keyboard (after setting up your build environment):
 
-## Case Files
-Files are available here: https://github.com/xyxjj/DeltaSplit75-Case-files
+    make deltasplit75-v2-default
 
-## Build Guide
-The build guide should be found at https://qmk.fm/deltasplit75
+See [build environment setup](https://docs.qmk.fm/build_environment_setup.html) then the [make instructions](https://docs.qmk.fm/make_instructions.html) for more information.
 
+Files are available here: [DeltaSplit75 Case Files](https://github.com/xyxjj/DeltaSplit75-Case-files)
 
-## First Time Setup
-
-Download or clone the whole firmware and navigate to the keyboards/deltasplit75 directory. Once your dev env is setup, you'll be able to generate the .hex using:
-
-```
-make v2
-
-or
-
-make v2-YOUR_KEYMAP_NAME (if you make a folder for your keymap)
-
-or
-
-make protosplit (if you have one of the prototype PCBs)
-```
-
-You will see a lot of output and if everything worked correctly you will see the built hex files:
-
-```
-deltasplit75_v2_protosplit.hex 
-
-or
-
-deltasplit74_v2_YOUR_KEYMAP_NAME.hex
-
-or
-
-deltasplit75_v2_default.hex
-
-```
-
-
-For more information on customizing keymaps, take a look at the primary documentation for [Customizing Your Keymap](/readme.md##customizing-your-keymap) in the main readme.md.
-
-### DeltaSplit75 V2
-The PCBs available in groupbuy are all v2, if you've bought one of my prototype PCBs (it says DeltaSplit65 on the silkscreen instead of 75), use the code make protosplit instead
-
-Features
---------
-
-For the full Quantum Mechanical Keyboard feature list, see [the parent readme.md](/readme.md).
-
-Some features supported by the firmware:
-
-* Either half can connect to the computer via USB, or both halves can be used
-  independently.
-* 75% formfactor
-* Support for multiple Bottom Rows
-* RGB underglow support
-* Split Backspace and ISO support
-
-
-Flashing
--------
-I personally use xLoader to upload my hex files to the keyboard, though any other working software is fine too
-
-
-Choosing which board to plug the USB cable into (choosing Master)
---------
-Because the two boards are identical, the firmware has logic to differentiate the left and right board.
-
-It uses two strategies to figure things out: look at the EEPROM (memory on the chip) or looks if the current board has the usb cable.
-
-The EEPROM approach requires additional setup (flashing the eeeprom) but allows you to swap the usb cable to either side.
-
-The USB cable approach is easier to setup and if you just want the usb cable on the left board, you do not need to do anything extra.
-
-### Setting the left hand as master
-If you always plug the usb cable into the left board, nothing extra is needed as this is the default. Comment out `EE_HANDS` and comment out `I2C_MASTER_RIGHT` or `MASTER_RIGHT` if for some reason it was set.
-
-### Setting the right hand as master
-If you always plug the usb cable into the right board, add an extra flag to your `config.h`
-```
- #define MASTER_RIGHT
-```
-
-### Setting EE_hands to use either hands as master
-If you define `EE_HANDS` in your `config.h`, you will need to set the
-EEPROM for the left and right halves.
-
-The EEPROM is used to store whether the
-half is left handed or right handed. This makes it so that the same firmware
-file will run on both hands instead of having to flash left and right handed
-versions of the firmware to each half. To flash the EEPROM file for the left
-half run:
-```
-avrdude -p atmega32u4 -P $(COM_PORT) -c avr109 -U eeprom:w:eeprom-lefthand.eep
-// or the equivalent in dfu-programmer
-
-```
-and similarly for right half
-```
-avrdude -p atmega32u4 -P $(COM_PORT) -c avr109 -U eeprom:w:eeprom-righhand.eep
-// or the equivalent in dfu-programmer
-```
-
-NOTE: replace `$(COM_PORT)` with the port of your device (e.g. `/dev/ttyACM0`)
-
-After you have flashed the EEPROM, you then need to set `EE_HANDS` in your config.h, rebuild the hex files and reflash.
-
-Note that you need to program both halves, but you have the option of using
-different keymaps for each half. You could program the left half with a QWERTY
-layout and the right half with a Colemak layout using bootmagic's default layout option.
-Then if you connect the left half to a computer by USB the keyboard will use QWERTY and Colemak when the
-right half is connected.
-
-
-Notes on Using Pro Micro 3.3V
------------------------------
-
-Do update the `F_CPU` parameter in `rules.mk` to `8000000` which reflects
-the frequency on the 3.3V board.
-
-Also, if the slave board is producing weird characters in certain columns,
-update the following line in `matrix.c` to the following:
-
-```
-// _delay_us(30);  // without this wait read unstable value.
-_delay_us(300);  // without this wait read unstable value.
-```
+The build guide should be found here: [DeltaSplit75 Build Guide](http://qmk.fm/deltasplit75/)

keyboards/deltasplit75/split_util.c

@@ -8,6 +8,7 @@
 #include "matrix.h"
 #include "keyboard.h"
 #include "config.h"
+#include "timer.h"
 
 #ifdef USE_I2C
 #  include "i2c.h"
@@ -21,7 +22,7 @@ static void setup_handedness(void) {
   #ifdef EE_HANDS
     isLeftHand = eeprom_read_byte(EECONFIG_HANDEDNESS);
   #else
-    // I2C_MASTER_RIGHT is deprecated use MASTER_RIGHT instead since this works for both serial and i2c
+    // I2C_MASTER_RIGHT is deprecated, use MASTER_RIGHT instead, since this works for both serial and i2c
     #if defined(I2C_MASTER_RIGHT) || defined(MASTER_RIGHT)
       isLeftHand = !has_usb();
     #else
@@ -33,12 +34,16 @@ static void setup_handedness(void) {
 static void keyboard_master_setup(void) {
 #ifdef USE_I2C
     i2c_master_init();
+#ifdef SSD1306OLED
+    matrix_master_OLED_init ();
+#endif
 #else
     serial_master_init();
 #endif
 }
 
 static void keyboard_slave_setup(void) {
+  timer_init();
 #ifdef USE_I2C
     i2c_slave_init(SLAVE_I2C_ADDRESS);
 #else

keyboards/eco/keymaps/default/Makefile

@@ -0,0 +1,25 @@
+
+
+# Build Options
+#   change to "no" to disable the options, or define them in the Makefile in 
+#   the appropriate keymap folder that will get included automatically
+#
+BOOTMAGIC_ENABLE = no       # Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE = yes       # Mouse keys(+4700)
+EXTRAKEY_ENABLE = yes       # Audio control and System control(+450)
+CONSOLE_ENABLE = no         # Console for debug(+400)
+COMMAND_ENABLE = no        # Commands for debug and configuration
+NKRO_ENABLE = yes            # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+BACKLIGHT_ENABLE = no      # Enable keyboard backlight functionality
+MIDI_ENABLE = no            # MIDI controls
+AUDIO_ENABLE = no          # Audio output on port C6
+UNICODE_ENABLE = no         # Unicode
+BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
+RGBLIGHT_ENABLE = no        # Enable WS2812 RGB underlight.  Do not enable this with audio at the same time.
+
+# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
+SLEEP_LED_ENABLE = no    # Breathing sleep LED during USB suspend
+
+ifndef QUANTUM_DIR
+	include ../../../../Makefile
+endif

keyboards/eco/keymaps/default/keymap.c

@@ -0,0 +1,107 @@
+// This is the canonical layout file for the Quantum project. If you want to add another keyboard,
+// this is the style you want to emulate.
+
+// Default ECO Layout
+// KLE here : http://www.keyboard-layout-editor.com/#/gists/0733eca6b4cb88ff9d7de746803f4039
+
+#include "eco.h"
+#include "action_layer.h"
+#include "eeconfig.h"
+
+extern keymap_config_t keymap_config;
+
+// Each layer gets a name for readability, which is then used in the keymap matrix below.
+// The underscores don't mean anything - you can have a layer called STUFF or any other name.
+// Layer names don't all need to be of the same length, obviously, and you can also skip them
+// entirely and just use numbers.
+#define _QWERTY 0
+#define _FN1 2
+#define _FN2 3
+
+enum eco_keycodes {
+  QWERTY = SAFE_RANGE
+};
+
+// Fillers to make layering more clear
+#define _______ KC_TRNS
+#define XXXXXXX KC_NO
+
+// Defines for task manager and such
+#define CALTDEL LCTL(LALT(KC_DEL))
+#define TSKMGR LCTL(LSFT(KC_ESC))
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+
+/* Qwerty
+ * ,-------------------------------------------------------------------------------------------------.
+ * | Esc  |   Q  |   W  |   E  |   R  |   T  |   Y  |   U  |   I  |   O  |   P  |   [  |   ]  | Bksp |
+ * |------+------+------+------+------+------+------+------+------+------+------+------+------+------|
+ * | Tab  |   A  |   S  |   D  |   F  |   G  |   H  |   J  |   K  |   L  |   ;  |   '  | Enter|  \   |
+ * |------+------+------+------+------+------+------+------+------+------+------+------+------+------|
+ * | Shift|   Z  |   X  |   C  |   V  |   B  |   N  |   M  |   ,  |   .  |   /  | Shift|  Up  | Del  |
+ * |------+------+------+------+------+------+------+------+------+------+------+------+------+------|
+ * | Ctrl |  GUI | Alt  | Del  | FN1  | FN1  | Space| Space| FN2  | FN2  | Ctrl | Left | Down | Right|
+ * `-------------------------------------------------------------------------------------------------'
+ */
+[_QWERTY] = KEYMAP(
+  KC_ESC,  KC_Q,   KC_W,    KC_E,   KC_R,     KC_T,     KC_Y,   KC_U,   KC_I,     KC_O,     KC_P,    KC_LBRC, KC_RBRC, KC_BSPC,
+  KC_TAB,  KC_A,   KC_S,    KC_D,   KC_F,     KC_G,     KC_H,   KC_J,   KC_K,     KC_L,     KC_SCLN, KC_QUOT, KC_ENT,  KC_BSLS,
+  KC_LSFT, KC_Z,   KC_X,    KC_C,   KC_V,     KC_B,     KC_N,   KC_M,   KC_COMM,  KC_DOT,   KC_SLSH, KC_RSFT, KC_UP,   KC_DEL,
+  KC_LCTL, KC_LGUI,KC_LALT, KC_DEL, MO(_FN1), MO(_FN1), KC_SPC, KC_SPC, MO(_FN2), MO(_FN2), KC_RCTL, KC_LEFT, KC_DOWN, KC_RGHT
+),
+
+/* FN1
+ * ,-------------------------------------------------------------------------------------------------.
+ * |      |   !  |   @  |   #  |   $  |   %  |   ^  |   &  |   *  |   (  |   )  |   _  |   +  |      |
+ * |------+------+------+------+------+------+------+------+------+------+------+------+------+------|
+ * |caltde|  F1  |  F2  |  F3  |  F4  |  F5  |  F6  |  F7  |  F8  |  F9  | F10  | F11  | F12  |      |
+ * |------+------+------+------+------+------+------+------+------+------+------+------+------+------|
+ * |      |      |      |      |      |      |      |      |      |      |      |      |      |      |
+ * |------+------+------+------+------+------+------+------+------+------+------+------+------+------|
+ * |      |      |      |      |      |      |      |      |      |      |      |      |      | RESET|
+ * `-------------------------------------------------------------------------------------------------'
+ */
+[_FN1] = KEYMAP(
+  _______, KC_EXLM, KC_AT,   KC_HASH, KC_DLR,  KC_PERC, KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN, KC_UNDS, KC_PLUS, _______,
+  CALTDEL, KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,  _______,
+  _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
+  _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, RESET
+),
+
+/* Raise
+ * ,-------------------------------------------------------------------------------------------------.
+ * |      |   1  |   2  |   3  |   4  |   5  |   6  |   7  |   8  |   9  |   0  |   -  |   =  |      |
+ * |------+------+------+------+------+------+------+------+------+------+------+------+------+------|
+ * |Taskmg|  F1  |  F2  |  F3  |  F4  |  F5  |  F6  |  F7  |  F8  |  F9  | F10  | F11  | F12  |      |
+ * |------+------+------+------+------+------+------+------+------+------+------+------+------+------|
+ * |      |      |      |      |      |      |      |      |      |      |      |      |      |      |
+ * |------+------+------+------+------+------+------+------+------+------+------+------+------+------|
+ * |      |      |      |      |      |      |      |      |      |      |      |      |      |      |
+ * `-------------------------------------------------------------------------------------------------'
+ */
+[_FN2] = KEYMAP(
+  _______, KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_MINS, KC_EQL,  _______,
+  TSKMGR,  KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,  _______,
+  _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
+  _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______
+)
+
+};
+
+void persistant_default_layer_set(uint16_t default_layer) {
+  eeconfig_update_default_layer(default_layer);
+  default_layer_set(default_layer);
+}
+
+bool process_record_user(uint16_t keycode, keyrecord_t *record) {
+  switch (keycode) {
+    case QWERTY:
+      if (record->event.pressed) {
+        persistant_default_layer_set(1UL<<_QWERTY);
+      }
+      return false;
+      break;
+  }
+  return true;
+}
+

keyboards/eco/keymaps/default/readme.md

@@ -0,0 +1,3 @@
+# ECO Default Layout by u/That-Canadian
+
+KLE here : http://www.keyboard-layout-editor.com/#/gists/0733eca6b4cb88ff9d7de746803f4039

keyboards/eco/keymaps/that_canadian/keymap.c

@@ -153,7 +153,7 @@ bool process_record_user(uint16_t keycode, keyrecord_t *record) {
     case QWERTY:
       if (record->event.pressed) {
         #ifdef AUDIO_ENABLE
-          PLAY_NOTE_ARRAY(tone_qwerty, false, 0);
+          PLAY_SONG(tone_qwerty);
         #endif
         persistant_default_layer_set(1UL<<_QWERTY);
       }
@@ -194,12 +194,12 @@ void matrix_init_user(void) {
 void startup_user()
 {
     _delay_ms(20); // gets rid of tick
-    PLAY_NOTE_ARRAY(tone_startup, false, 0);
+    PLAY_SONG(tone_startup);
 }
 
 void shutdown_user()
 {
-    PLAY_NOTE_ARRAY(tone_goodbye, false, 0);
+    PLAY_SONG(tone_goodbye);
     _delay_ms(150);
     stop_all_notes();
 }
@@ -211,7 +211,7 @@ void music_on_user(void)
 
 void music_scale_user(void)
 {
-    PLAY_NOTE_ARRAY(music_scale, false, 0);
+    PLAY_SONG(music_scale);
 }
 
 #endif

keyboards/eco/rev1/rules.mk

@@ -1,5 +1 @@
-BACKLIGHT_ENABLE = no
-
-ifndef QUANTUM_DIR
-	include ../../../Makefile
-endif
+BACKLIGHT_ENABLE = no

keyboards/eco/rev2/rules.mk

@@ -1,5 +1 @@
-BACKLIGHT_ENABLE = no
-
-ifndef QUANTUM_DIR
-	include ../../../Makefile
-endif
+BACKLIGHT_ENABLE = no

keyboards/ergodone/config.h

@@ -1,8 +1,6 @@
 #ifndef ERGODOX_ERGODONE_CONFIG_H
 #define ERGODOX_ERGODONE_CONFIG_H
 
-#include "../config.h"
-
 #include "config_common.h"
 
 /* USB Device descriptor parameter */
@@ -17,6 +15,31 @@
 #define MATRIX_ROWS 6
 #define MATRIX_COLS 14
 
+#define MOUSEKEY_INTERVAL       20
+#define MOUSEKEY_DELAY          0
+#define MOUSEKEY_TIME_TO_MAX    60
+#define MOUSEKEY_MAX_SPEED      7
+#define MOUSEKEY_WHEEL_DELAY 0
+
+#define TAPPING_TOGGLE  1
+
+/* define if matrix has ghost */
+//#define MATRIX_HAS_GHOST
+
+#define TAPPING_TERM    200
+#define IGNORE_MOD_TAP_INTERRUPT // this makes it possible to do rolling combos (zx) with keys that convert to other keys on hold (z becomes ctrl when you hold it, and when this option isn't enabled, z rapidly followed by x actually sends Ctrl-x. That's bad.)
+
+/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
+#define LOCKING_SUPPORT_ENABLE
+/* Locking resynchronize hack */
+#define LOCKING_RESYNC_ENABLE
+
+/* key combination for command */
+#define IS_COMMAND() ( \
+    keyboard_report->mods == (MOD_BIT(KC_LCTL) | MOD_BIT(KC_RCTL)) || \
+    keyboard_report->mods == (MOD_BIT(KC_LSFT) | MOD_BIT(KC_RSFT)) \
+)
+
 /* number of backlight levels */
 #define BACKLIGHT_LEVELS 3
 

keyboards/ergodone/ergodone.c

@@ -0,0 +1,52 @@
+#include "ergodone.h"
+
+extern inline void ergodox_board_led_on(void);
+extern inline void ergodox_right_led_1_on(void);
+extern inline void ergodox_right_led_2_on(void);
+extern inline void ergodox_right_led_3_on(void);
+extern inline void ergodox_right_led_on(uint8_t led);
+
+extern inline void ergodox_board_led_off(void);
+extern inline void ergodox_right_led_1_off(void);
+extern inline void ergodox_right_led_2_off(void);
+extern inline void ergodox_right_led_3_off(void);
+extern inline void ergodox_right_led_off(uint8_t led);
+
+void ergodox_led_init(void);
+void ergodox_blink_all_leds(void);
+
+void matrix_init_kb(void) {
+  ergodox_led_init();
+  ergodox_blink_all_leds();
+  matrix_init_user();
+}
+
+void ergodox_led_init(void)
+ {
+     DDRB  |=  (1<<PB5 | 1<<PB6 | 1<<PB3);
+     PORTB &= ~(1<<PB5 | 1<<PB6 | 1<<PB3);
+     DDRB  |=  (1<<PB0);
+     PORTB |=  (1<<PB0);
+     DDRD  |=  (1<<PB5);
+     PORTD |=  (1<<PB5);
+}
+
+void ergodox_blink_all_leds(void)
+{
+    ergodox_led_all_off();
+    ergodox_led_all_set(LED_BRIGHTNESS_HI);
+    ergodox_right_led_1_on();
+    _delay_ms(50);
+    ergodox_right_led_2_on();
+    _delay_ms(50);
+    ergodox_right_led_3_on();
+    _delay_ms(50);
+    ergodox_right_led_1_off();
+    _delay_ms(50);
+    ergodox_right_led_2_off();
+    _delay_ms(50);
+    ergodox_right_led_3_off();
+    //ergodox_led_all_on();
+    //_delay_ms(333);
+    ergodox_led_all_off();
+}

keyboards/ergodone/ergodone.h

@@ -10,18 +10,57 @@
 
 void init_ergodox(void);
 
-inline void ergodox_right_led_1_off(void)               {}
-inline void ergodox_right_led_1_on(void)                {}
-inline void ergodox_right_led_2_off(void)               {}
-inline void ergodox_right_led_2_on(void)                {}
-inline void ergodox_right_led_3_off(void)               {}
-inline void ergodox_right_led_3_on(void)                {}
-inline void ergodox_right_led_on(uint8_t l)             {}
-inline void ergodox_right_led_off(uint8_t l)            {}
-inline void ergodox_board_led_off(void)                 {}
-inline void ergodox_board_led_on(void)                  {}
-inline void ergodox_led_all_on(void)                    {}
-inline void ergodox_led_all_off(void)                   {}
+inline void ergodox_right_led_1_off(void) { DDRB &= ~(1<<PB5); PORTB &= ~(1<<PB5); }
+inline void ergodox_right_led_1_on(void) { DDRB |= (1<<PB5); PORTB |= (1<<PB5); }
+inline void ergodox_right_led_2_off(void) { DDRB &= ~(1<<PB6); PORTB &= ~(1<<PB6); }
+inline void ergodox_right_led_2_on(void) { DDRB |= (1<<PB6); PORTB |= (1<<PB6); }
+inline void ergodox_right_led_3_off(void) { DDRB &= ~(1<<PB3); PORTB &= ~(1<<PB3); }
+inline void ergodox_right_led_3_on(void) { DDRB |= (1<<PB3); PORTB |= (1<<PB3); }
+inline void ergodox_right_led_on(uint8_t l) {
+    switch (l) {
+         case 1:
+             ergodox_right_led_1_on();
+             break;
+         case 2:
+             ergodox_right_led_2_on();
+             break;
+         case 3:
+             ergodox_right_led_3_on();
+             break;
+         default:
+             break;
+        }
+}
+
+inline void ergodox_right_led_off(uint8_t l) {
+    switch (l) {
+         case 1:
+             ergodox_right_led_1_off();
+             break;
+         case 2:
+             ergodox_right_led_2_off();
+             break;
+         case 3:
+             ergodox_right_led_3_off();
+             break;
+         default:
+             break;
+        }
+}
+inline void ergodox_board_led_off(void) { DDRB &= ~(1<<PB0); PORTB |= (1<<PB0); }
+inline void ergodox_board_led_on(void) { DDRB |= (1<<PB0); PORTB &= ~(1<<PB0); }
+inline void ergodox_led_all_on(void) {
+    ergodox_right_led_1_on();
+    ergodox_right_led_2_on();
+    ergodox_right_led_3_on();
+    ergodox_board_led_on();
+}
+inline void ergodox_led_all_off(void) {
+    ergodox_right_led_1_off();
+    ergodox_right_led_2_off();
+    ergodox_right_led_3_off();
+    ergodox_board_led_off();
+}
 inline void ergodox_right_led_1_set(uint8_t n)          {}
 inline void ergodox_right_led_2_set(uint8_t n)          {}
 inline void ergodox_right_led_3_set(uint8_t n)          {}
@@ -60,4 +99,6 @@ inline void ergodox_led_all_set(uint8_t n)              {}
     { KC_NO, k51, k52, k53, k54, k55,   k56,      k57,   k58,   k59, k5A, k5B, k5C, KC_NO  } \
    }
 
+#define LAYOUT_ergodox KEYMAP
+
 #endif

keyboards/ergodone/keymaps/default/keymap.c

@@ -1,4 +1,4 @@
-#include "ergodox.h"
+#include QMK_KEYBOARD_H
 #include "debug.h"
 #include "action_layer.h"
 #include "version.h"
@@ -38,7 +38,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
  */
 // If it accepts an argument (i.e, is a function), it doesn't need KC_.
 // Otherwise, it needs KC_*
-[BASE] = KEYMAP(  // layer 0 : default
+[BASE] = LAYOUT_ergodox(  // layer 0 : default
         // left hand
         KC_EQL,         KC_1,         KC_2,   KC_3,   KC_4,   KC_5,   KC_LEFT,
         KC_DELT,        KC_Q,         KC_W,   KC_E,   KC_R,   KC_T,   TG(SYMB),
@@ -80,7 +80,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
  *                                 `--------------------'       `--------------------'
  */
 // SYMBOLS
-[SYMB] = KEYMAP(
+[SYMB] = LAYOUT_ergodox(
        // left hand
        VRSN,   KC_F1,  KC_F2,  KC_F3,  KC_F4,  KC_F5,  KC_TRNS,
        KC_TRNS,KC_EXLM,KC_AT,  KC_LCBR,KC_RCBR,KC_PIPE,KC_TRNS,
@@ -122,7 +122,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
  *                                 `--------------------'       `--------------------'
  */
 // MEDIA AND MOUSE
-[MDIA] = KEYMAP(
+[MDIA] = LAYOUT_ergodox(
        KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
        KC_TRNS, KC_TRNS, KC_TRNS, KC_MS_U, KC_TRNS, KC_TRNS, KC_TRNS,
        KC_TRNS, KC_TRNS, KC_MS_L, KC_MS_D, KC_MS_R, KC_TRNS,

keyboards/ergodone/rules.mk

@@ -70,6 +70,8 @@ OPT_DEFS += -DBOOTLOADER_SIZE=4096
 # Build Options
 #   comment out to disable the options.
 #
+CUSTOM_MATRIX           = yes # Custom matrix file for the ErgoDone
+UNICODE_ENABLE          = yes # Unicode
 BOOTMAGIC_ENABLE        = yes	# Virtual DIP switch configuration(+1000)
 MOUSEKEY_ENABLE         = yes	# Mouse keys(+4700)
 EXTRAKEY_ENABLE         = yes	# Audio control and System control(+450)
@@ -89,3 +91,5 @@ LEDMAP_IN_EEPROM_ENABLE = no  # Read LED mapping from eeprom
 ONEHAND_ENABLE          = no  # Disable Onehand
 RGBLIGHT_ENABLE         = no
 MIDI_ENABLE             = no
+
+LAYOUTS = ergodox ergodox_80

keyboards/ergodox/config.h

@@ -1,40 +0,0 @@
-#ifndef KEYBOARDS_ERGODOX_CONFIG_H_
-#define KEYBOARDS_ERGODOX_CONFIG_H_
-
-#define MOUSEKEY_INTERVAL       20
-#define MOUSEKEY_DELAY          0
-#define MOUSEKEY_TIME_TO_MAX    60
-#define MOUSEKEY_MAX_SPEED      7
-#define MOUSEKEY_WHEEL_DELAY 0
-
-#define TAPPING_TOGGLE  1
-
-/* define if matrix has ghost */
-//#define MATRIX_HAS_GHOST
-
-#define TAPPING_TERM    200
-#define IGNORE_MOD_TAP_INTERRUPT // this makes it possible to do rolling combos (zx) with keys that convert to other keys on hold (z becomes ctrl when you hold it, and when this option isn't enabled, z rapidly followed by x actually sends Ctrl-x. That's bad.)
-
-/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
-#define LOCKING_SUPPORT_ENABLE
-/* Locking resynchronize hack */
-#define LOCKING_RESYNC_ENABLE
-
-/* key combination for command */
-#define IS_COMMAND() ( \
-    keyboard_report->mods == (MOD_BIT(KC_LCTL) | MOD_BIT(KC_RCTL)) || \
-    keyboard_report->mods == (MOD_BIT(KC_LSFT) | MOD_BIT(KC_RSFT)) \
-)
-
-#ifdef SUBPROJECT_ez
-    #include "ez/config.h"
-#endif
-#ifdef SUBPROJECT_infinity
-    #include "infinity/config.h"
-#endif
-#ifdef SUBPROJECT_ergodone
-    #include "ergodone/config.h"
-#endif
-
-
-#endif /* KEYBOARDS_ERGODOX_CONFIG_H_ */

keyboards/ergodox/ergodone/ergodone.c

@@ -1,5 +0,0 @@
-#include "ergodone.h"
-
-void matrix_init_kb(void) {
-  matrix_init_user();
-}

keyboards/ergodox/ergodox.c

@@ -1,4 +0,0 @@
-#include "ergodox.h"
-#include "debug.h"
-#include "action_layer.h"
-

keyboards/ergodox/ergodox.h

@@ -1,13 +0,0 @@
-#ifndef KEYBOARDS_ERGODOX_ERGODOX_H_
-#define KEYBOARDS_ERGODOX_ERGODOX_H_
-#ifdef SUBPROJECT_ez
-    #include "ez.h"
-#endif
-#ifdef SUBPROJECT_infinity
-    #include "infinity.h"
-#endif
-#ifdef SUBPROJECT_ergodone
-    #include "ergodone.h"
-#endif
-
-#endif /* KEYBOARDS_ERGODOX_ERGODOX_H_ */

keyboards/ergodox/keymaps/default/visualizer.c

@@ -1,42 +0,0 @@
-/*
-Copyright 2017 Fred Sundvik
-
-This program is free software: you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation, either version 2 of the License, or
-(at your option) any later version.
-
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with this program.  If not, see <http://www.gnu.org/licenses/>.
-*/
-
-#include "simple_visualizer.h"
-
-// This function should be implemented by the keymap visualizer
-// Don't change anything else than state->target_lcd_color and state->layer_text as that's the only thing
-// that the simple_visualizer assumes that you are updating
-// Also make sure that the buffer passed to state->layer_text remains valid until the previous animation is
-// stopped. This can be done by either double buffering it or by using constant strings
-static void get_visualizer_layer_and_color(visualizer_state_t* state) {
-    uint8_t saturation = 60;
-    if (state->status.leds & (1u << USB_LED_CAPS_LOCK)) {
-        saturation = 255;
-    }
-    if (state->status.layer & 0x4) {
-        state->target_lcd_color = LCD_COLOR(0, saturation, 0xFF);
-        state->layer_text = "Media & Mouse";
-    }
-    else if (state->status.layer & 0x2) {
-        state->target_lcd_color = LCD_COLOR(168, saturation, 0xFF);
-        state->layer_text = "Symbol";
-    }
-    else {
-        state->target_lcd_color = LCD_COLOR(84, saturation, 0xFF);
-        state->layer_text = "Default";
-    }
-}

keyboards/ergodox/keymaps/kristian/keymap.c

@@ -1,79 +0,0 @@
-#include "ergodox.h"
-#include "debug.h"
-#include "action_layer.h"
-#include "version.h"
-#include "keymap_fr_ch.h"
-#include "keymap_french.h"
-#include "keymap_german.h"
-#include "keymap_german_ch.h"
-#include "keymap_nordic.h"
-#include "keymap_norwegian.h"
-#include "keymap_spanish.h"
-
-const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
-
-
-[0] = KEYMAP(NO_LESS,KC_1,KC_2,KC_3,KC_4,KC_5,KC_BSPACE,KC_TAB,KC_Q,KC_W,KC_E,KC_R,KC_T,TG(1),KC_BSPACE,KC_A,KC_S,KC_D,KC_F,KC_G,SFT_T(NO_APOS),CTL_T(KC_Z),KC_X,KC_C,KC_V,KC_B,SFT_T(KC_EQUAL),MO(1),CTL_T(KC_GRAVE),KC_LGUI,KC_LEFT,KC_RIGHT,KC_ESCAPE,KC_CAPSLOCK,KC_HOME,KC_SPACE,KC_LGUI,KC_LALT,KC_DELETE,KC_6,KC_7,KC_8,KC_9,KC_0,NO_PLUS,TG(1),KC_Y,KC_U,KC_I,KC_O,KC_P,NO_AM,KC_H,KC_J,KC_K,KC_L,LT(2,NO_OSLH),NO_AE,SFT_T(KC_RBRC),KC_N,KC_M,KC_COMMA,KC_DOT,CTL_T(KC_SLASH),SFT_T(NO_APOS),KC_DOWN,KC_UP,NO_LPRN,NO_RPRN,MO(1),NO_QUOT,CTL_T(KC_ESCAPE),NO_APOS,KC_LALT,KC_LGUI,KC_ENTER),
-
-[1] = KEYMAP(M(0),KC_F1,KC_F2,KC_F3,KC_F4,KC_F5,KC_BSPACE,KC_TRANSPARENT,KC_TRANSPARENT,KC_TRANSPARENT,KC_TRANSPARENT,KC_TRANSPARENT,KC_TRANSPARENT,KC_TRANSPARENT,KC_BSPACE,KC_TRANSPARENT,KC_TRANSPARENT,KC_TRANSPARENT,KC_TRANSPARENT,KC_TRANSPARENT,KC_LSHIFT,KC_TRANSPARENT,KC_TRANSPARENT,KC_TRANSPARENT,KC_TRANSPARENT,KC_TRANSPARENT,KC_TRANSPARENT,KC_TRANSPARENT,KC_LCTL,KC_LGUI,KC_LEFT,KC_RIGHT,KC_ESCAPE,KC_TRANSPARENT,KC_HOME,KC_SPACE,KC_LGUI,KC_LALT,KC_DELETE,KC_F6,KC_F7,KC_F8,KC_F9,KC_F10,KC_F11,KC_TRANSPARENT,KC_7,KC_8,KC_9,KC_TRANSPARENT,KC_TRANSPARENT,KC_F12,KC_4,KC_5,KC_6,KC_TRANSPARENT,KC_TRANSPARENT,KC_TRANSPARENT,KC_0,KC_1,KC_2,KC_3,NO_LBRC,NO_RBRC,KC_LSHIFT,KC_COMMA,KC_DOT,LSFT(NO_LBRC),LSFT(NO_RBRC),KC_TRANSPARENT,KC_TRANSPARENT,KC_TRANSPARENT,KC_TRANSPARENT,KC_LALT,KC_LGUI,KC_ENTER),
-
-[2] = KEYMAP(KC_ESCAPE,KC_TRANSPARENT,KC_TRANSPARENT,KC_TRANSPARENT,KC_TRANSPARENT,KC_TRANSPARENT,KC_TRANSPARENT,KC_TRANSPARENT,KC_TRANSPARENT,KC_TRANSPARENT,KC_MS_UP,KC_TRANSPARENT,KC_TRANSPARENT,KC_TRANSPARENT,KC_TRANSPARENT,KC_TRANSPARENT,KC_MS_LEFT,KC_MS_DOWN,KC_MS_RIGHT,KC_TRANSPARENT,KC_LSHIFT,KC_TRANSPARENT,KC_TRANSPARENT,KC_TRANSPARENT,KC_TRANSPARENT,KC_TRANSPARENT,KC_TRANSPARENT,KC_LCTL,KC_LALT,KC_LGUI,KC_MS_BTN1,KC_MS_BTN2,KC_ESCAPE,KC_TRANSPARENT,KC_TRANSPARENT,KC_SPACE,KC_LGUI,KC_TRANSPARENT,KC_TRANSPARENT,KC_TRANSPARENT,KC_TRANSPARENT,KC_TRANSPARENT,KC_TRANSPARENT,KC_TRANSPARENT,KC_TRANSPARENT,KC_TRANSPARENT,KC_TRANSPARENT,KC_TRANSPARENT,KC_TRANSPARENT,KC_TRANSPARENT,KC_TRANSPARENT,KC_TRANSPARENT,KC_TRANSPARENT,KC_TRANSPARENT,KC_TRANSPARENT,KC_TRANSPARENT,KC_TRANSPARENT,KC_TRANSPARENT,KC_TRANSPARENT,KC_TRANSPARENT,KC_MEDIA_PREV_TRACK,KC_MEDIA_PLAY_PAUSE,KC_MEDIA_NEXT_TRACK,KC_TRANSPARENT,KC_TRANSPARENT,KC_AUDIO_VOL_UP,KC_AUDIO_VOL_DOWN,KC_AUDIO_MUTE,KC_TRANSPARENT,KC_TRANSPARENT,KC_TRANSPARENT,KC_ESCAPE,KC_MS_WH_UP,KC_MS_WH_DOWN,KC_MS_ACCEL0,KC_MS_ACCEL1),
-
-};
-
-const uint16_t PROGMEM fn_actions[] = {
-  [1] = ACTION_LAYER_TAP_TOGGLE(1)
-};
-
-const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt)
-{
-      switch(id) {
-        case 0:
-        if (record->event.pressed) {
-          SEND_STRING (QMK_KEYBOARD "/" QMK_KEYMAP " @ " QMK_VERSION);
-        }
-        break;
-      }
-    return MACRO_NONE;
-};
-
-void matrix_scan_user(void) {
-
-    uint8_t layer = biton32(layer_state);
-
-    ergodox_board_led_off();
-    ergodox_right_led_1_off();
-    ergodox_right_led_2_off();
-    ergodox_right_led_3_off();
-    switch (layer) {
-        case 1:
-            ergodox_right_led_1_on();
-            break;
-        case 2:
-            ergodox_right_led_2_on();
-            break;
-        case 3:
-            ergodox_right_led_3_on();
-            break;
-        case 4:
-            ergodox_right_led_1_on();
-            ergodox_right_led_2_on();
-            break;
-        case 5:
-            ergodox_right_led_1_on();
-            ergodox_right_led_3_on();
-            break;
-        case 6:
-            ergodox_right_led_2_on();
-            ergodox_right_led_3_on();
-            break;
-        case 7:
-            ergodox_right_led_1_on();
-            ergodox_right_led_2_on();
-            ergodox_right_led_3_on();
-            break;
-        default:
-            break;
-    }
-
-};

keyboards/ergodox/keymaps/yoruian/Makefile

@@ -1,13 +0,0 @@
-ifndef QUANTUM_DIR
-	include ../../../../Makefile
-endif
-
-install-xorg-configuration:
-	install -m 0664 90-$(KEYBOARD)-$(KEYMAP).conf \
-	    /etc/X11/xorg.conf.d/90-$(KEYBOARD)-$(KEYMAP).conf
-	install -m 0644 $(KEYBOARD)_$(KEYMAP) \
-	    /usr/share/X11/xkb/symbols/$(KEYBOARD)_$(KEYMAP)
-
-uninstall-xorg-configuration:
-	-rm -f /etc/X11/xorg.conf.d/90-$(KEYBOARD)-$(KEYMAP).conf
-	-rm -f /usr/share/X11/xkb/symbols/$(KEYBOARD)_$(KEYMAP)

keyboards/ergodox/readme.md

@@ -1,111 +0,0 @@
-ErgoDox
-==
-
-The ErgoDox is a split ergonomic keyboard originally developed by Dominic "Dox" Beauchamp.
-
-* The **ErgoDox EZ** is a Teensy-based split mechanical keyboard, sold assembled and with warranty at [ErgoDox-EZ.com](https://ergodox-ez.com).
-* The **ErgoDox Infinity** is an ARM-based split mechanical keyboard, sold from time to time in kit form at [MassDrop.com](https://www.massdrop.com/buy/infinity-ergodox)
-
-The ErgoDox EZ code is maintained by Erez Zukerman and is officially supported by the EZ -- the keyboard ships running QMK from the factory.
-
-The ErgoDox Infinity code is maintained by Fredizzimo, as a community contribution.
-
-## Standard Build Instructions
-
-To build QMK for the ErgoDox, see the official [build guide](/docs/build_guide.md).
-
-## Additional resources
-
-A graphical configurator for the ErgoDox EZ is available at [configure.ergodox-ez.com](http://configure.ergodox-ez.com). It outputs QMK-compiled binaries, as well as source code for your layout, which you can use as a jumping-off point to further customize in QMK.
-
-# Flashing Firmware
-
-## ErgoDox EZ
-
-The Ez uses the [Teensy Loader](https://www.pjrc.com/teensy/loader.html).
-
-Linux users need to modify udev rules as described on the [Teensy
-Linux page].  Some distributions provide a binary, maybe called
-`teensy-loader-cli`.
-
-[Teensy Linux page]: https://www.pjrc.com/teensy/loader_linux.html
-
-To flash the firmware:
-
-  - Build the firmware with `make keymapname`, for example `make default`
-  - This will result in a hex file called `ergodox_ez_keymapname.hex`, e.g.
-    `ergodox_ez_default.hex`
-
-  - Start the teensy loader.
-
-  - Load the .hex file into it.
-
-  - Press the Reset button by inserting a paperclip gently into the reset hole
-    in the top right corder.
-
-  - Click the button in the Teensy app to download the firmware.
-
-To flash with ´teensy-loader-cli´:
-
-  - Build the firmware with `make keymapname`, for example `make default`
-
-  - Run ´<path/to/>teensy_loader_cli -mmcu=atmega32u4 -w ergodox_ez_<keymap>.hex´
-
-  - Press the Reset button by inserting a paperclip gently into the reset hole
-    in the top right corder.
-
-## ErgoDox Infinity
-
-The Infinity is two completely independent keyboards, and needs to be flashed
-for the left and right halves seperately.  To flash them:
-
-  - Build the firmware with `make infinity-keymapname`
-
-  - Plug in the left hand keyboard only.
-
-  - Press the program button (back of keyboard, above thumb pad).
-
-  - Install the firmware with `sudo make infinity-keymapname-dfu-util`
-
-  - Build right hand firmware with `make infinity-keymapname MASTER=right`
-
-  - Plug in the right hand keyboard only.
-
-  - Press the program button (back of keyboard, above thumb pad).
-
-  - Install the firmware with `sudo make infinity-keymapname-dfu-util MASTER=right`
-
-More information on the Infinity firmware is available in the [TMK/chibios for
-Input Club Infinity Ergodox](https://github.com/fredizzimo/infinity_ergodox/blob/master/README.md)
-
-### Infinity Master/Two Halves
-
-The Infinity is two completely independent keyboards, that can connect together.
-You have a few options in how you flash the firmware:
-
-- Flash the left half, rebuild the firmware with "MASTER=right" and then flash
-  the right half.  This allows you to plug in either half directly to the
-  computer and is what the above instructions do.
-
-- Flash the left half, then flash the same firmware on the right.  This only
-  works when the left half is plugged directly to the computer and the keymap
-  is mirrored.  It saves the small extra step of rebuilding with
-  "MASTER=right".
-
-- The same as the previous one but with "MASTER=right" when you build the
-  firmware, then flash the same firmware to both halves.  You just have to
-  directly connect the right half to the computer.
-
-- For minor changes such as changing only the keymap without having updated
-  any part of the firmware code itself, you can program only the MASTER half.
-  It is safest to program both halves though.
-
-## ErgoDone
-
-The ErgoDone uses its own HID bootloader and needs to be flashed using the [TKG Toolkit](https://github.com/kairyu/tkg-toolkit).
-
-  - Build the firmware with `make ergodone-keymapname`
-
-  - While plugging in the USB cable, hold the two right-most keys on the left half of the ErgoDone to enter FLASH mode.
-
-  - Use the utility from [TKG Toolkit](https://github.com/kairyu/tkg-toolkit) to flash the keyboard: `hid_bootloader_cli -mmcu=atmega32u4 ergodox_ergodone_keymapname.hex`

keyboards/ergodox/rules.mk

@@ -1,28 +0,0 @@
-#----------------------------------------------------------------------------
-# On command line:
-#
-# make = Make software.
-#
-# make clean = Clean out built project files.
-#
-# That's pretty much all you need. To compile, always go make clean, 
-# followed by make.
-#
-# For advanced users only:
-# make teensy = Download the hex file to the device, using teensy_loader_cli.
-#               (must have teensy_loader_cli installed).
-#
-#----------------------------------------------------------------------------
-# Build Options
-#   comment out to disable the options.
-#
-BOOTMAGIC_ENABLE = no  # Virtual DIP switch configuration(+1000)
-MOUSEKEY_ENABLE  = yes # Mouse keys(+4700)
-EXTRAKEY_ENABLE  = yes # Audio control and System control(+450)
-CONSOLE_ENABLE   = no  # Console for debug(+400)
-COMMAND_ENABLE   = yes # Commands for debug and configuration
-CUSTOM_MATRIX    = yes # Custom matrix file for the ErgoDox EZ
-SLEEP_LED_ENABLE = yes # Breathing sleep LED during USB suspend
-NKRO_ENABLE      = yes # USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
-UNICODE_ENABLE   = yes # Unicode
-ONEHAND_ENABLE   = yes # Allow swapping hands of keyboard

keyboards/ergodox_ez/Makefile

@@ -4,5 +4,5 @@ RGBLIGHT_ENABLE = yes
 MIDI_ENABLE = no
 
 ifndef MAKEFILE_INCLUDED
-	include ../../../Makefile
+	include ../../Makefile
 endif

keyboards/ergodox_ez/config.h

@@ -19,8 +19,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #ifndef ERGODOX_EZ_CONFIG_H
 #define ERGODOX_EZ_CONFIG_H
 
-#include "../config.h"
-
 #include "config_common.h"
 
 /* USB Device descriptor parameter */
@@ -35,6 +33,31 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define MATRIX_ROWS 14
 #define MATRIX_COLS 6
 
+#define MOUSEKEY_INTERVAL       20
+#define MOUSEKEY_DELAY          0
+#define MOUSEKEY_TIME_TO_MAX    60
+#define MOUSEKEY_MAX_SPEED      7
+#define MOUSEKEY_WHEEL_DELAY 0
+
+#define TAPPING_TOGGLE  1
+
+/* define if matrix has ghost */
+//#define MATRIX_HAS_GHOST
+
+#define TAPPING_TERM    200
+#define IGNORE_MOD_TAP_INTERRUPT // this makes it possible to do rolling combos (zx) with keys that convert to other keys on hold (z becomes ctrl when you hold it, and when this option isn't enabled, z rapidly followed by x actually sends Ctrl-x. That's bad.)
+
+/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
+#define LOCKING_SUPPORT_ENABLE
+/* Locking resynchronize hack */
+#define LOCKING_RESYNC_ENABLE
+
+/* key combination for command */
+#define IS_COMMAND() ( \
+    keyboard_report->mods == (MOD_BIT(KC_LCTL) | MOD_BIT(KC_RCTL)) || \
+    keyboard_report->mods == (MOD_BIT(KC_LSFT) | MOD_BIT(KC_RSFT)) \
+)
+
 /* number of backlight levels */
 #define BACKLIGHT_LEVELS 3
 

keyboards/ergodox_ez/ergodox_ez.c

@@ -1,4 +1,4 @@
-#include "ez.h"
+#include QMK_KEYBOARD_H
 #include "i2cmaster.h"
 
 

keyboards/ergodox_ez/ergodox_ez.h

@@ -160,4 +160,6 @@ inline void ergodox_led_all_set(uint8_t n)
     { k0D, k1D, k2D, k3D, k4D, KC_NO }    \
    }
 
+#define LAYOUT_ergodox KEYMAP
+
 #endif

keyboards/ergodox_ez/keymaps/blakedietz/keymap.c

@@ -1,4 +1,4 @@
-#include "ergodox.h"
+#include QMK_KEYBOARD_H
 #include "debug.h"
 #include "action_layer.h"
 

keyboards/ergodox_ez/keymaps/default/keymap.c

@@ -0,0 +1,223 @@
+#include QMK_KEYBOARD_H
+#include "debug.h"
+#include "action_layer.h"
+#include "version.h"
+
+#define BASE 0 // default layer
+#define SYMB 1 // symbols
+#define MDIA 2 // media keys
+
+enum custom_keycodes {
+  PLACEHOLDER = SAFE_RANGE, // can always be here
+  EPRM,
+  VRSN,
+  RGB_SLD
+};
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+/* Keymap 0: Basic layer
+ *
+ * ,--------------------------------------------------.           ,--------------------------------------------------.
+ * |   =    |   1  |   2  |   3  |   4  |   5  | LEFT |           | RIGHT|   6  |   7  |   8  |   9  |   0  |   -    |
+ * |--------+------+------+------+------+-------------|           |------+------+------+------+------+------+--------|
+ * | Del    |   Q  |   W  |   E  |   R  |   T  |  L1  |           |  L1  |   Y  |   U  |   I  |   O  |   P  |   \    |
+ * |--------+------+------+------+------+------|      |           |      |------+------+------+------+------+--------|
+ * | BkSp   |   A  |   S  |   D  |   F  |   G  |------|           |------|   H  |   J  |   K  |   L  |; / L2|' / Cmd |
+ * |--------+------+------+------+------+------| Hyper|           | Meh  |------+------+------+------+------+--------|
+ * | LShift |Z/Ctrl|   X  |   C  |   V  |   B  |      |           |      |   N  |   M  |   ,  |   .  |//Ctrl| RShift |
+ * `--------+------+------+------+------+-------------'           `-------------+------+------+------+------+--------'
+ *   |Grv/L1|  '"  |AltShf| Left | Right|                                       |  Up  | Down |   [  |   ]  | ~L1  |
+ *   `----------------------------------'                                       `----------------------------------'
+ *                                        ,-------------.       ,-------------.
+ *                                        | App  | LGui |       | Alt  |Ctrl/Esc|
+ *                                 ,------|------|------|       |------+--------+------.
+ *                                 |      |      | Home |       | PgUp |        |      |
+ *                                 | Space|Backsp|------|       |------|  Tab   |Enter |
+ *                                 |      |ace   | End  |       | PgDn |        |      |
+ *                                 `--------------------'       `----------------------'
+ */
+// If it accepts an argument (i.e, is a function), it doesn't need KC_.
+// Otherwise, it needs KC_*
+[BASE] = LAYOUT_ergodox(  // layer 0 : default
+        // left hand
+        KC_EQL,         KC_1,         KC_2,   KC_3,   KC_4,   KC_5,   KC_LEFT,
+        KC_DELT,        KC_Q,         KC_W,   KC_E,   KC_R,   KC_T,   TG(SYMB),
+        KC_BSPC,        KC_A,         KC_S,   KC_D,   KC_F,   KC_G,
+        KC_LSFT,        CTL_T(KC_Z),  KC_X,   KC_C,   KC_V,   KC_B,   ALL_T(KC_NO),
+        LT(SYMB,KC_GRV),KC_QUOT,      LALT(KC_LSFT),  KC_LEFT,KC_RGHT,
+                                              ALT_T(KC_APP),  KC_LGUI,
+                                                              KC_HOME,
+                                               KC_SPC,KC_BSPC,KC_END,
+        // right hand
+             KC_RGHT,     KC_6,   KC_7,  KC_8,   KC_9,   KC_0,             KC_MINS,
+             TG(SYMB),    KC_Y,   KC_U,  KC_I,   KC_O,   KC_P,             KC_BSLS,
+                          KC_H,   KC_J,  KC_K,   KC_L,   LT(MDIA, KC_SCLN),GUI_T(KC_QUOT),
+             MEH_T(KC_NO),KC_N,   KC_M,  KC_COMM,KC_DOT, CTL_T(KC_SLSH),   KC_RSFT,
+                                  KC_UP, KC_DOWN,KC_LBRC,KC_RBRC,          KC_FN1,
+             KC_LALT,        CTL_T(KC_ESC),
+             KC_PGUP,
+             KC_PGDN,KC_TAB, KC_ENT
+    ),
+/* Keymap 1: Symbol Layer
+ *
+ * ,---------------------------------------------------.           ,--------------------------------------------------.
+ * |Version  |  F1  |  F2  |  F3  |  F4  |  F5  |      |           |      |  F6  |  F7  |  F8  |  F9  |  F10 |   F11  |
+ * |---------+------+------+------+------+------+------|           |------+------+------+------+------+------+--------|
+ * |         |   !  |   @  |   {  |   }  |   |  |      |           |      |   Up |   7  |   8  |   9  |   *  |   F12  |
+ * |---------+------+------+------+------+------|      |           |      |------+------+------+------+------+--------|
+ * |         |   #  |   $  |   (  |   )  |   `  |------|           |------| Down |   4  |   5  |   6  |   +  |        |
+ * |---------+------+------+------+------+------|      |           |      |------+------+------+------+------+--------|
+ * |         |   %  |   ^  |   [  |   ]  |   ~  |      |           |      |   &  |   1  |   2  |   3  |   \  |        |
+ * `---------+------+------+------+------+-------------'           `-------------+------+------+------+------+--------'
+ *   | EPRM  |      |      |      |      |                                       |      |    . |   0  |   =  |      |
+ *   `-----------------------------------'                                       `----------------------------------'
+ *                                        ,-------------.       ,-------------.
+ *                                        |Animat|      |       |Toggle|Solid |
+ *                                 ,------|------|------|       |------+------+------.
+ *                                 |Bright|Bright|      |       |      |Hue-  |Hue+  |
+ *                                 |ness- |ness+ |------|       |------|      |      |
+ *                                 |      |      |      |       |      |      |      |
+ *                                 `--------------------'       `--------------------'
+ */
+// SYMBOLS
+[SYMB] = LAYOUT_ergodox(
+       // left hand
+       VRSN,   KC_F1,  KC_F2,  KC_F3,  KC_F4,  KC_F5,  KC_TRNS,
+       KC_TRNS,KC_EXLM,KC_AT,  KC_LCBR,KC_RCBR,KC_PIPE,KC_TRNS,
+       KC_TRNS,KC_HASH,KC_DLR, KC_LPRN,KC_RPRN,KC_GRV,
+       KC_TRNS,KC_PERC,KC_CIRC,KC_LBRC,KC_RBRC,KC_TILD,KC_TRNS,
+          EPRM,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,
+                                       RGB_MOD,KC_TRNS,
+                                               KC_TRNS,
+                               RGB_VAD,RGB_VAI,KC_TRNS,
+       // right hand
+       KC_TRNS, KC_F6,   KC_F7,  KC_F8,   KC_F9,   KC_F10,  KC_F11,
+       KC_TRNS, KC_UP,   KC_7,   KC_8,    KC_9,    KC_ASTR, KC_F12,
+                KC_DOWN, KC_4,   KC_5,    KC_6,    KC_PLUS, KC_TRNS,
+       KC_TRNS, KC_AMPR, KC_1,   KC_2,    KC_3,    KC_BSLS, KC_TRNS,
+                         KC_TRNS,KC_DOT,  KC_0,    KC_EQL,  KC_TRNS,
+       RGB_TOG, RGB_SLD,
+       KC_TRNS,
+       KC_TRNS, RGB_HUD, RGB_HUI
+),
+/* Keymap 2: Media and mouse keys
+ *
+ * ,--------------------------------------------------.           ,--------------------------------------------------.
+ * |        |      |      |      |      |      |      |           |      |      |      |      |      |      |        |
+ * |--------+------+------+------+------+-------------|           |------+------+------+------+------+------+--------|
+ * |        |      |      | MsUp |      |      |      |           |      |      |      |      |      |      |        |
+ * |--------+------+------+------+------+------|      |           |      |------+------+------+------+------+--------|
+ * |        |      |MsLeft|MsDown|MsRght|      |------|           |------|      |      |      |      |      |  Play  |
+ * |--------+------+------+------+------+------|      |           |      |------+------+------+------+------+--------|
+ * |        |      |      |      |      |      |      |           |      |      |      | Prev | Next |      |        |
+ * `--------+------+------+------+------+-------------'           `-------------+------+------+------+------+--------'
+ *   |      |      |      | Lclk | Rclk |                                       |VolUp |VolDn | Mute |      |      |
+ *   `----------------------------------'                                       `----------------------------------'
+ *                                        ,-------------.       ,-------------.
+ *                                        |      |      |       |      |      |
+ *                                 ,------|------|------|       |------+------+------.
+ *                                 |      |      |      |       |      |      |Brwser|
+ *                                 |      |      |------|       |------|      |Back  |
+ *                                 |      |      |      |       |      |      |      |
+ *                                 `--------------------'       `--------------------'
+ */
+// MEDIA AND MOUSE
+[MDIA] = LAYOUT_ergodox(
+       KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+       KC_TRNS, KC_TRNS, KC_TRNS, KC_MS_U, KC_TRNS, KC_TRNS, KC_TRNS,
+       KC_TRNS, KC_TRNS, KC_MS_L, KC_MS_D, KC_MS_R, KC_TRNS,
+       KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+       KC_TRNS, KC_TRNS, KC_TRNS, KC_BTN1, KC_BTN2,
+                                           KC_TRNS, KC_TRNS,
+                                                    KC_TRNS,
+                                  KC_TRNS, KC_TRNS, KC_TRNS,
+    // right hand
+       KC_TRNS,  KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+       KC_TRNS,  KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+                 KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_MPLY,
+       KC_TRNS,  KC_TRNS, KC_TRNS, KC_MPRV, KC_MNXT, KC_TRNS, KC_TRNS,
+                          KC_VOLU, KC_VOLD, KC_MUTE, KC_TRNS, KC_TRNS,
+       KC_TRNS, KC_TRNS,
+       KC_TRNS,
+       KC_TRNS, KC_TRNS, KC_WBAK
+),
+};
+
+const uint16_t PROGMEM fn_actions[] = {
+    [1] = ACTION_LAYER_TAP_TOGGLE(SYMB)                // FN1 - Momentary Layer 1 (Symbols)
+};
+
+const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt)
+{
+  // MACRODOWN only works in this function
+      switch(id) {
+        case 0:
+        if (record->event.pressed) {
+          SEND_STRING (QMK_KEYBOARD "/" QMK_KEYMAP " @ " QMK_VERSION);
+        }
+        break;
+        case 1:
+        if (record->event.pressed) { // For resetting EEPROM
+          eeconfig_init();
+        }
+        break;
+      }
+    return MACRO_NONE;
+};
+
+bool process_record_user(uint16_t keycode, keyrecord_t *record) {
+  switch (keycode) {
+    // dynamically generate these.
+    case EPRM:
+      if (record->event.pressed) {
+        eeconfig_init();
+      }
+      return false;
+      break;
+    case VRSN:
+      if (record->event.pressed) {
+        SEND_STRING (QMK_KEYBOARD "/" QMK_KEYMAP " @ " QMK_VERSION);
+      }
+      return false;
+      break;
+    case RGB_SLD:
+      if (record->event.pressed) {
+        #ifdef RGBLIGHT_ENABLE
+          rgblight_mode(1);
+        #endif
+      }
+      return false;
+      break;
+  }
+  return true;
+}
+
+// Runs just one time when the keyboard initializes.
+void matrix_init_user(void) {
+
+};
+
+
+// Runs constantly in the background, in a loop.
+void matrix_scan_user(void) {
+
+    uint8_t layer = biton32(layer_state);
+
+    ergodox_board_led_off();
+    ergodox_right_led_1_off();
+    ergodox_right_led_2_off();
+    ergodox_right_led_3_off();
+    switch (layer) {
+      // TODO: Make this relevant to the ErgoDox EZ.
+        case 1:
+            ergodox_right_led_1_on();
+            break;
+        case 2:
+            ergodox_right_led_2_on();
+            break;
+        default:
+            // none
+            break;
+    }
+
+};

keyboards/ergodox_ez/keymaps/default/readme.md

@@ -0,0 +1,15 @@
+# ErgoDox EZ Default Configuration
+
+## Changelog
+
+* Dec 2016:
+  * Added LED keys
+  * Refreshed layout graphic, comes from http://configure.ergodox-ez.com now.
+* Sep 22, 2016:
+  * Created a new key in layer 1 (bottom-corner key) that resets the EEPROM.
+* Feb 2, 2016 (V1.1): 
+  * Made the right-hand quote key double as Cmd/Win on hold. So you get ' when you tap it, " when you tap it with Shift, and Cmd or Win when you hold it. You can then use it as a modifier, or just press and hold it for a moment (and then let go) to send a single Cmd or Win keystroke (handy for opening the Start menu on Windows).
+
+This is what we ship with out of the factory. :) The image says it all:
+
+![Default](https://i.imgur.com/Be53jH7.png)

keyboards/ergodox_ez/keymaps/default_osx/keymap.c

@@ -1,7 +1,7 @@
 // Netable differences vs. the default firmware for the ErgoDox EZ:
 // 1. The Cmd key is now on the right side, making Cmd+Space easier.
 // 2. The media keys work on OSX (But not on Windows).
-#include "ergodox.h"
+#include QMK_KEYBOARD_H
 #include "debug.h"
 #include "action_layer.h"
 
@@ -33,7 +33,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
  */
 // If it accepts an argument (i.e, is a function), it doesn't need KC_.
 // Otherwise, it needs KC_*
-[BASE] = KEYMAP(  // layer 0 : default
+[BASE] = LAYOUT_ergodox(  // layer 0 : default
         // left hand
         KC_EQL,         KC_1,         KC_2,   KC_3,   KC_4,   KC_5,   KC_LEFT,
         KC_DELT,        KC_Q,         KC_W,   KC_E,   KC_R,   KC_T,   TG(SYMB),
@@ -75,7 +75,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
  *                                 `--------------------'       `--------------------'
  */
 // SYMBOLS
-[SYMB] = KEYMAP(
+[SYMB] = LAYOUT_ergodox(
        // left hand
        KC_TRNS,KC_F1,  KC_F2,  KC_F3,  KC_F4,  KC_F5,  KC_TRNS,
        KC_TRNS,KC_EXLM,KC_AT,  KC_LCBR,KC_RCBR,KC_PIPE,KC_TRNS,
@@ -117,7 +117,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
  *                                 `--------------------'       `--------------------'
  */
 // MEDIA AND MOUSE
-[MDIA] = KEYMAP(
+[MDIA] = LAYOUT_ergodox(
        KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
        KC_TRNS, KC_TRNS, KC_TRNS, KC_MS_U, KC_TRNS, KC_TRNS, KC_TRNS,
        KC_TRNS, KC_TRNS, KC_MS_L, KC_MS_D, KC_MS_R, KC_TRNS,

keyboards/ergodox_ez/keymaps/drashna-custom/Makefile

@@ -1,10 +1,10 @@
-TAP_DANCE_ENABLE = yes
-LAYER_UNDERGLOW_LIGHTING = yes
-SLEEP_LED_ENABLE = yes  # Breathing sleep LED during USB suspend
-COMMAND_ENABLE   = no  # Commands for debug and configuration
-RGBLIGHT_ENABLE = yes
-MIDI_ENABLE = no
-
-ifndef QUANTUM_DIR
-	include ../../../../Makefile
-endif
+TAP_DANCE_ENABLE = yes
+LAYER_UNDERGLOW_LIGHTING = yes
+SLEEP_LED_ENABLE = yes  # Breathing sleep LED during USB suspend
+COMMAND_ENABLE   = no  # Commands for debug and configuration
+RGBLIGHT_ENABLE = yes
+MIDI_ENABLE = no
+
+ifndef QUANTUM_DIR
+	include ../../../../Makefile
+endif

keyboards/ergodox_ez/keymaps/drashna-custom/keymap.c

@@ -1,4 +1,4 @@
-#include "ergodox.h"
+#include QMK_KEYBOARD_H
 #include "debug.h"
 #include "action_layer.h"
 #include "version.h"

keyboards/ergodox_ez/keymaps/drashna/Makefile

@@ -1,6 +1,6 @@
-RGBLIGHT_ENABLE = yes
-RGBLIGHT_ANIMATION = no
-
-ifndef QUANTUM_DIR
-	include ../../../../Makefile
-endif
+RGBLIGHT_ENABLE = yes
+RGBLIGHT_ANIMATION = no
+
+ifndef QUANTUM_DIR
+	include ../../../../Makefile
+endif

keyboards/ergodox_ez/keymaps/drashna/keymap.c

@@ -1,4 +1,4 @@
-#include "ergodox.h"
+#include QMK_KEYBOARD_H
 #include "debug.h"
 #include "action_layer.h"
 #include "version.h"

keyboards/ergodox_ez/keymaps/profet_80/keymap.c

@@ -1,4 +1,4 @@
-#include "ergodox.h"
+#include QMK_KEYBOARD_H
 #include "debug.h"
 #include "action_layer.h"
 #include "version.h"

keyboards/ergodox_ez/keymaps/steno/keymap.c

@@ -1,4 +1,4 @@
-#include "ergodox.h"
+#include QMK_KEYBOARD_H
 #include "debug.h"
 #include "action_layer.h"
 #include "sendchar.h"

keyboards/ergodox_ez/matrix.c

@@ -33,7 +33,7 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #include "debug.h"
 #include "util.h"
 #include "matrix.h"
-#include "ez.h"
+#include QMK_KEYBOARD_H
 #include "i2cmaster.h"
 #ifdef DEBUG_MATRIX_SCAN_RATE
 #include  "timer.h"

keyboards/ergodox_ez/readme.md

@@ -0,0 +1,33 @@
+# ErgoDox EZ
+
+The Ez uses the [Teensy Loader](https://www.pjrc.com/teensy/loader.html).
+
+Linux users need to modify udev rules as described on the [Teensy
+Linux page].  Some distributions provide a binary, maybe called
+`teensy-loader-cli`.
+
+[Teensy Linux page]: https://www.pjrc.com/teensy/loader_linux.html
+
+To flash the firmware:
+
+  - Build the firmware with `make keymapname`, for example `make default`
+  - This will result in a hex file called `ergodox_ez_keymapname.hex`, e.g.
+    `ergodox_ez_default.hex`
+
+  - Start the teensy loader.
+
+  - Load the .hex file into it.
+
+  - Press the Reset button by inserting a paperclip gently into the reset hole
+    in the top right corder.
+
+  - Click the button in the Teensy app to download the firmware.
+
+To flash with ´teensy-loader-cli´:
+
+  - Build the firmware with `make keymapname`, for example `make default`
+
+  - Run ´<path/to/>teensy_loader_cli -mmcu=atmega32u4 -w ergodox_ez_<keymap>.hex´
+
+  - Press the Reset button by inserting a paperclip gently into the reset hole
+    in the top right corder.