update submodule

* [docs/] Cleaning up some language to make it more clear.

* [docs/] Adding instructions for installing deps on RH / Fedora.

.gitmodules

@@ -1,6 +1,7 @@
 [submodule "lib/chibios"]
 	path = lib/chibios
 	url = https://github.com/qmk/ChibiOS
+  branch = handwire
 [submodule "lib/chibios-contrib"]
 	path = lib/chibios-contrib
 	url = https://github.com/qmk/ChibiOS-Contrib

common_features.mk

@@ -20,6 +20,12 @@ SERIAL_SRC += $(wildcard $(SERIAL_PATH)/system/*.c)
 SERIAL_DEFS += -DSERIAL_LINK_ENABLE
 COMMON_VPATH += $(SERIAL_PATH)
 
+ifeq ($(PLATFORM),AVR)
+  COMMON_VPATH += $(DRIVER_PATH)/avr
+else
+  COMMON_VPATH += $(DRIVER_PATH)/arm
+endif
+
 ifeq ($(strip $(API_SYSEX_ENABLE)), yes)
     OPT_DEFS += -DAPI_SYSEX_ENABLE
     SRC += $(QUANTUM_DIR)/api/api_sysex.c
@@ -184,6 +190,11 @@ ifeq ($(strip $(USB_HID_ENABLE)), yes)
     include $(TMK_DIR)/protocol/usb_hid.mk
 endif
 
+ifeq ($(strip $(I2C_SLAVE_ENABLE)), yes)
+    SRC += twi2c.c
+    OPT_DEFS += -DI2C_SLAVE_ENABLE
+endif
+
 QUANTUM_SRC:= \
     $(QUANTUM_DIR)/quantum.c \
     $(QUANTUM_DIR)/keymap_common.c \

docs/faq_build.md

@@ -1,40 +1,25 @@
 # Frequently Asked Build Questions
 
-This page covers questions about building QMK. If you have not yet you should read the [Build Environment Setup](getting_started_build_tools.md) and [Make Instructions](getting_started_make_guide.md) guides.
+This page covers questions about building QMK. If you haven't yet done so, you should read the [Build Environment Setup](getting_started_build_tools.md) and [Make Instructions](getting_started_make_guide.md) guides.
 
 ## Can't Program on Linux
-You will need proper permission to operate a device. For Linux users see udev rules below. Easy way is to use `sudo` command, if you are not familiar with this command check its manual with `man sudo` or this page on line.
+You will need proper permissions to operate a device. For Linux users, see the instructions regarding `udev` rules, below. If you have issues with `udev`, a work-around is to use the `sudo` command. If you are not familiar with this command, check its manual with `man sudo` or [see this webpage](https://linux.die.net/man/8/sudo).
 
-In short when your controller is ATMega32u4,
+An example of using `sudo`, when your controller is ATMega32u4:
 
     $ sudo dfu-programmer atmega32u4 erase --force
     $ sudo dfu-programmer atmega32u4 flash your.hex
     $ sudo dfu-programmer atmega32u4 reset
 
-or just
+or just:
 
     $ sudo make <keyboard>:<keymap>:dfu
 
-But to run `make` with root privilege is not good idea. Use former method if possible.
-
-## WINAVR is Obsolete
-It is no longer recommended and may cause some problem.
-See [TMK Issue #99](https://github.com/tmk/tmk_keyboard/issues/99).
-
-## USB VID and PID
-You can use any ID you want with editing `config.h`. Using any presumably unused ID will be no problem in fact except for very low chance of collision with other product.
-
-Most boards in QMK use `0xFEED` as the vendor ID. You should look through other keyboards to make sure you pick a unique Product ID.
-
-Also see this.
-https://github.com/tmk/tmk_keyboard/issues/150
-
-You can buy a really unique VID:PID here. I don't think you need this for personal use.
-- http://www.obdev.at/products/vusb/license.html
-- http://www.mcselec.com/index.php?page=shop.product_details&flypage=shop.flypage&product_id=92&option=com_phpshop&Itemid=1
+Note that running `make` with `sudo` is generally *not* a good idea, and you should use one of the former methods, if possible.
 
 ## Linux `udev` Rules
-On Linux you need proper privilege to access device file of MCU, you'll have to use `sudo` when flashing firmware. You can circumvent this with placing these files in `/etc/udev/rules.d/`.
+On Linux, you'll need proper privileges to access the MCU. You can either use
+`sudo` when flashing firmware, or place these files in `/etc/udev/rules.d/`.
 
 **/etc/udev/rules.d/50-atmel-dfu.rules:**
 ```
@@ -52,6 +37,21 @@ SUBSYSTEMS=="usb", ATTRS{idVendor}=="03eb", ATTRS{idProduct}=="2ff0", MODE:="066
 SUBSYSTEMS=="usb", ATTRS{idVendor}=="feed", MODE:="0666"
 ```
 
+## WINAVR is Obsolete
+It is no longer recommended and may cause some problem.
+See [TMK Issue #99](https://github.com/tmk/tmk_keyboard/issues/99).
+
+## USB VID and PID
+You can use any ID you want with editing `config.h`. Using any presumably unused ID will be no problem in fact except for very low chance of collision with other product.
+
+Most boards in QMK use `0xFEED` as the vendor ID. You should look through other keyboards to make sure you pick a unique Product ID.
+
+Also see this.
+https://github.com/tmk/tmk_keyboard/issues/150
+
+You can buy a really unique VID:PID here. I don't think you need this for personal use.
+- http://www.obdev.at/products/vusb/license.html
+- http://www.mcselec.com/index.php?page=shop.product_details&flypage=shop.flypage&product_id=92&option=com_phpshop&Itemid=1
 
 ## Cortex: `cstddef: No such file or directory`
 GCC 4.8 of Ubuntu 14.04 had this problem and had to update to 4.9 with this PPA.
@@ -61,7 +61,6 @@ https://github.com/tmk/tmk_keyboard/issues/212
 https://github.com/tmk/tmk_keyboard/wiki/mbed-cortex-porting#compile-error-cstddef
 https://developer.mbed.org/forum/mbed/topic/5205/
 
-
 ## `clock_prescale_set` and `clock_div_1` Not Available
 Your toolchain is too old to support the MCU. For example WinAVR 20100110 doesn't support ATMega32u2.
 

docs/getting_started_build_tools.md

@@ -31,11 +31,14 @@ git
 
 Install the dependencies with your favorite package manager.
 
-Debian/Ubuntu example:
+Debian / Ubuntu example:
 
     sudo apt-get update
     sudo apt-get install gcc unzip wget zip gcc-avr binutils-avr avr-libc dfu-programmer dfu-util gcc-arm-none-eabi binutils-arm-none-eabi libnewlib-arm-none-eabi
 
+Fedora / Red Hat example:
+    sudo dnf install gcc unzip wget zip dfu-util dfu-programmer avr-gcc avr-libc binutils-avr32-linux-gnu arm-none-eabi-gcc-cs arm-none-eabi-binutils-cs arm-none-eabi-newlib
+
 ## Nix
 
 If you're on [NixOS](https://nixos.org/), or have Nix installed on Linux or macOS, run `nix-shell` from the repository root to get a build environment.

docs/keymap.md

@@ -33,7 +33,7 @@ The state of the Keymap layer is determined by two 32 bit parameters:
 * **`default_layer_state`** indicates a base keymap layer (0-31) which is always valid and to be referred (the default layer).
 * **`layer_state`** has current on/off status of each layer in its bits.
 
-Keymap layer '0' is usually `default_layer`, wither other layers initially off after booting up the firmware, although this can configured differently in `config.h`. It is useful to change `default_layer` when you completely switch a key layout, for example, if you want to switch to Colemak instead of Qwerty.
+Keymap layer '0' is usually the `default_layer`, with other layers initially off after booting up the firmware, although this can configured differently in `config.h`. It is useful to change `default_layer` when you completely switch a key layout, for example, if you want to switch to Colemak instead of Qwerty.
 
     Initial state of Keymap          Change base layout
     -----------------------          ------------------

drivers/arm/twi2c.c

@@ -0,0 +1,219 @@
+/* Copyright 2018 Jack Humbert
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include "twi2c.h"
+#include <string.h>
+#include <hal.h>
+#include "hal_i2cslave.h"
+#include "chprintf.h"
+#include "memstreams.h"
+#include "printf.h"
+#include "matrix.h"
+
+/**
+ * I2C slave test routine.
+ *
+ * To use: Add file to a project, call startComms() with the address of a serial stream
+ *
+ * There are two different responses:
+ *  a) A read-only transaction - returns the "Initial Reply" message
+ *  b) A write then read transaction - calls a message processor and returns the generated reply.
+ *          Stretches clock until reply available.
+ */
+// static const I2CConfig masterI2CConfig = {
+//   400000
+// };
+
+I2CSlaveMsgCB twi2c_slave_message_process, catchError, clearAfterSend;
+
+static const I2CConfig slaveI2CConfig = {
+  STM32_TIMINGR_PRESC(15U) |
+  STM32_TIMINGR_SCLDEL(4U) | STM32_TIMINGR_SDADEL(2U) |
+  STM32_TIMINGR_SCLH(15U)  | STM32_TIMINGR_SCLL(21U),
+  0,
+  0,
+  NULL
+};
+
+char initialReplyBody[50] = "Initial reply";        // 'Status' response if read without preceding write
+
+
+uint32_t messageCounter = 0;                /* Counts number of messages received to return as part of response */
+
+uint8_t  rxBody[2];                       /* stores last message master sent us (intentionally a few bytes smaller than txBody) */
+uint8_t  txBody[MATRIX_ROWS/2];                       /* Return message buffer for computed replies */
+
+BaseSequentialStream *chp = NULL;           // Used for serial logging
+
+// Handler when something sent to us
+const I2CSlaveMsg echoRx =
+{
+  sizeof(rxBody),       /* max sizeof received msg body */
+  rxBody,               /* body of received msg */
+  NULL,                 /* do nothing on address match */
+  twi2c_slave_message_process,     /* Routine to process received messages */
+  catchError            /* Error hook */
+};
+
+
+// // 'Empty' reply when nothing to say, and no message received. In RAM, to allow update
+I2CSlaveMsg initialReply =
+{
+  sizeof(initialReplyBody),   /* trailing zero byte will be repeated as needed */
+  (uint8_t *)initialReplyBody,
+  NULL,                 /* do nothing on address match */
+  NULL,                 /* do nothing after reply sent */
+  catchError            /* Error hook */
+};
+
+// // 'Empty' reply when nothing to say, and no message received. In RAM, to allow update
+// I2CSlaveMsg initialReply =
+// {
+//   0,  /* trailing zero byte will be repeated as needed */
+//   NULL,
+//   NULL,                 /* do nothing on address match */
+//   NULL,                 /* do nothing after reply sent */
+//   catchError            /* Error hook */
+// };
+
+
+// Response to received messages
+I2CSlaveMsg echoReply = {  /* this is in RAM so size may be updated */
+  MATRIX_ROWS / 2,                    /* filled in with the length of the message to send */
+  txBody,               /* Response message */
+  NULL,                 /* do nothing special on address match */
+  clearAfterSend,       /* Clear receive buffer once replied */
+  catchError            /* Error hook */
+};
+
+
+/**
+ * Track I2C errors
+ */
+uint8_t gotI2cError = 0;
+uint32_t lastI2cErrorFlags = 0;
+
+// Called from ISR to log error
+void noteI2cError(uint32_t flags)
+{
+  lastI2cErrorFlags = flags;
+  gotI2cError = 1;
+}
+
+
+
+/**
+ * Generic error handler
+ *
+ * Called in interrupt context, so need to watch what we do
+ */
+void catchError(I2CDriver *i2cp)
+{
+  noteI2cError(i2cp->errors);
+}
+
+extern void matrix_copy(matrix_row_t * copy);
+
+const char hexString[16] = "0123456789abcdef";
+
+/**
+ *  Message processor - looks at received message, determines reply as quickly as possible
+ *
+ *  Responds with the value of the messageCounter (in hex), followed by the received message in [..]
+ *
+ *  Note: Called in interrupt context, so need to be quick!
+ */
+void twi2c_slave_message_process(I2CDriver *i2cp) {
+
+  // size_t len = i2cSlaveBytes(i2cp);         // Number of bytes received
+
+  // memset(txBody, 0, MATRIX_ROWS / 2 * sizeof(matrix_row_t));
+  matrix_copy(txBody);
+
+  echoReply.size =  MATRIX_ROWS / 2;
+  i2cSlaveReplyI(i2cp, &echoReply);
+}
+
+
+/**
+ * Callback after sending of response complete - restores default reply in case polled
+ */
+void clearAfterSend(I2CDriver *i2cp)
+{
+  // echoReply.size = 0;               // Clear receive message
+  // i2cSlaveReplyI(i2cp, &initialReply);
+}
+
+
+/**
+ * Start the I2C Slave port to accept comms from master CPU
+ *
+ * We then go into a loop checking for errors, and never return
+ */
+
+void twi2c_slave_init(void) {
+
+  palSetGroupMode(GPIOB,8,9, PAL_MODE_INPUT);       // Try releasing special pins for a short time
+  chThdSleepMilliseconds(10);
+
+  /* I2C1 SCL on PF1, SDA on PF0 */
+  palSetPadMode(GPIOB, 9, PAL_MODE_ALTERNATE(4) | PAL_STM32_OTYPE_OPENDRAIN | PAL_STM32_PUPDR_PULLUP);
+  palSetPadMode(GPIOB, 8, PAL_MODE_ALTERNATE(4) | PAL_STM32_OTYPE_OPENDRAIN | PAL_STM32_PUPDR_PULLUP);
+
+
+  i2cStart(&I2C_DRIVER, &slaveI2CConfig);
+#if HAL_USE_I2C_SLAVE
+  I2C_DRIVER.slaveTimeout = MS2ST(100);       // Time for complete message
+#endif
+
+  // i2cSlaveConfigure(&I2C_DRIVER, &echoRx, &initialReply);
+
+  memset(txBody, 0, MATRIX_ROWS / 2 * sizeof(matrix_row_t));
+
+  i2cSlaveConfigure(&I2C_DRIVER, &echoRx, &echoReply);
+
+  // Enable match address after everything else set up
+  i2cMatchAddress(&I2C_DRIVER, slaveI2Caddress/2);
+//  i2cMatchAddress(&I2C_DRIVER, myOtherI2Caddress/2);
+ // i2cMatchAddress(&I2C_DRIVER, 0);  /* "all call" */
+
+  printf("Slave I2C started\n\r");
+
+}
+
+void twi2c_slave_task(void) {
+    if (gotI2cError) {
+      gotI2cError = 0;
+        printf("I2cError: %04x\r\n", lastI2cErrorFlags);
+    }
+}
+
+void twi2c_master_init(void) {
+
+  palSetGroupMode(GPIOB,8,9, PAL_MODE_INPUT);       // Try releasing special pins for a short time
+  chThdSleepMilliseconds(10);
+
+  palSetPadMode(GPIOB, 9, PAL_MODE_ALTERNATE(4) | PAL_STM32_OTYPE_OPENDRAIN | PAL_STM32_PUPDR_PULLUP);
+  palSetPadMode(GPIOB, 8, PAL_MODE_ALTERNATE(4) | PAL_STM32_OTYPE_OPENDRAIN | PAL_STM32_PUPDR_PULLUP);
+
+  i2cStart(&I2C_DRIVER, &slaveI2CConfig);
+
+  // try high drive (from kiibohd)
+  // I2C_DRIVER.i2c->C2 |= I2Cx_C2_HDRS;
+  // try glitch fixing (from kiibohd)
+  // I2C_DRIVER.i2c->FLT = 4;
+
+}

drivers/arm/twi2c.h

@@ -0,0 +1,31 @@
+/* Copyright 2018 Jack Humbert
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include "ch.h"
+#include "hal.h"
+
+#ifndef I2C_DRIVER
+  #define I2C_DRIVER I2CD1
+#endif
+
+#define slaveI2Caddress  0x30       /* Address in our terms - halved by later code */
+//#define myOtherI2Caddress 0x19
+
+I2CSlaveMsgCB twi2c_slave_message_process, catchError, clearAfterSend;
+
+void twi2c_slave_init(void);
+
+void twi2c_master_init(void);

keyboards/1up60rgb/1up60rgb.c

@@ -0,0 +1 @@
+#include "1up60rgb.h"

keyboards/1up60rgb/1up60rgb.h

@@ -0,0 +1,20 @@
+#ifndef KB_H
+#define KB_H
+
+#include "quantum.h"
+
+#define KEYMAP( \
+	K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012, K013, K014, \
+	K100,       K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, K113, K114, \
+	K200,       K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212, K213, K214, \
+	K300, K301, K302, K303, K304, K305, K306, K307, K308, K309, K310, K311,       K313, K314, \
+	K400, K401,       K403,             K406,                   K410, K411,       K413, K414  \
+) { \
+	{ K000,  K001,  K002,  K003,  K004,  K005,  K006,  K007,  K008,  K009,  K010,  K011,  K012,  K013,  K014 }, \
+	{ K100,  KC_NO, K102,  K103,  K104,  K105,  K106,  K107,  K108,  K109,  K110,  K111,  K112,  K113,  K114 }, \
+	{ K200,  KC_NO, K202,  K203,  K204,  K205,  K206,  K207,  K208,  K209,  K210,  K211,  K212,  K213,  K214 }, \
+	{ K300,  K301,  K302,  K303,  K304,  K305,  K306,  K307,  K308,  K309,  K310,  K311,  KC_NO, K313,  K314 }, \
+	{ K400,  K401,  KC_NO, K403,  KC_NO, KC_NO, K406,  KC_NO, KC_NO, KC_NO, K410,  K411,  KC_NO, K413,  K414 }  \
+}
+
+#endif

keyboards/1up60rgb/config.h

@@ -0,0 +1,58 @@
+#ifndef CONFIG_H
+#define CONFIG_H
+
+#include "config_common.h"
+
+/* USB Device descriptor parameter */
+#define VENDOR_ID       0xFEED
+#define PRODUCT_ID      0x6060
+#define DEVICE_VER      0x0001
+#define MANUFACTURER    1upkeyboards
+#define PRODUCT         1UP RGB Underglow PCB
+#define DESCRIPTION     60% keyboard with RGB underglow
+
+/* key matrix size */
+#define MATRIX_ROWS 5
+#define MATRIX_COLS 15
+
+/* key matrix pins */
+#define MATRIX_ROW_PINS { D0, D1, D2, D3, D5 }
+#define MATRIX_COL_PINS { F0, F1, E6, C7, C6, B7, D4, B1, B0, B5, B4, D7, D6, B3, F4 }
+#define UNUSED_PINS
+
+/* COL2ROW or ROW2COL */
+#define DIODE_DIRECTION COL2ROW
+
+/* number of backlight levels */
+#define BACKLIGHT_PIN B6
+#ifdef BACKLIGHT_PIN
+#define BACKLIGHT_LEVELS 5
+#endif
+
+/* Set 0 if debouncing isn't needed */
+#define DEBOUNCING_DELAY 5
+
+/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
+#define LOCKING_SUPPORT_ENABLE
+
+/* Locking resynchronize hack */
+#define LOCKING_RESYNC_ENABLE
+
+/* key combination for command */
+#define IS_COMMAND() ( \
+    keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
+)
+
+/* prevent stuck modifiers */
+#define PREVENT_STUCK_MODIFIERS
+
+#define RGB_DI_PIN E2
+#ifdef RGB_DI_PIN
+#define RGBLIGHT_ANIMATIONS
+#define RGBLED_NUM 20
+#define RGBLIGHT_HUE_STEP 8
+#define RGBLIGHT_SAT_STEP 8
+#define RGBLIGHT_VAL_STEP 8
+#endif
+
+#endif

keyboards/1up60rgb/keymaps/default/keymap.c

@@ -0,0 +1,72 @@
+#include "1up60rgb.h"
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+
+	KEYMAP(
+		KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_BSPC,
+		KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS,
+		KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, KC_ENT,
+		KC_LSFT, KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_RSFT,
+		KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, KC_RGUI, MO(1), KC_RCTL),
+
+	KEYMAP(
+		KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+		KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+		KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+		KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+		KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS)
+
+};
+
+const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) {
+	;
+
+	switch (id) {
+
+	}
+	return MACRO_NONE;
+}
+
+void matrix_init_user(void) {
+}
+
+void matrix_scan_user(void) {
+}
+
+bool process_record_user(uint16_t keycode, keyrecord_t *record) {
+	return true;
+}
+
+void led_set_user(uint8_t usb_led) {
+
+	if (usb_led & (1 << USB_LED_NUM_LOCK)) {
+
+	} else {
+
+	}
+
+	if (usb_led & (1 << USB_LED_CAPS_LOCK)) {
+		DDRB |= (1 << 2); PORTB &= ~(1 << 2);
+	} else {
+		DDRB &= ~(1 << 2); PORTB &= ~(1 << 2);
+	}
+
+	if (usb_led & (1 << USB_LED_SCROLL_LOCK)) {
+
+	} else {
+
+	}
+
+	if (usb_led & (1 << USB_LED_COMPOSE)) {
+
+	} else {
+
+	}
+
+	if (usb_led & (1 << USB_LED_KANA)) {
+
+	} else {
+
+	}
+
+}

keyboards/1up60rgb/keymaps/iso/keymap.c

@@ -0,0 +1,72 @@
+#include "1up60rgb.h"
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+
+	KEYMAP(
+		KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_BSPC,
+		KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_ENT,
+		KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_NUHS, KC_ENT,
+		KC_LSFT, KC_NUBS, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_RSFT,
+		KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, KC_RGUI, MO(1), KC_RCTL),
+
+	KEYMAP(
+		KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+		KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+		KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+		KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+		KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS)
+
+};
+
+const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) {
+	;
+
+	switch (id) {
+
+	}
+	return MACRO_NONE;
+}
+
+void matrix_init_user(void) {
+}
+
+void matrix_scan_user(void) {
+}
+
+bool process_record_user(uint16_t keycode, keyrecord_t *record) {
+	return true;
+}
+
+void led_set_user(uint8_t usb_led) {
+
+	if (usb_led & (1 << USB_LED_NUM_LOCK)) {
+
+	} else {
+
+	}
+
+	if (usb_led & (1 << USB_LED_CAPS_LOCK)) {
+		DDRB |= (1 << 2); PORTB &= ~(1 << 2);
+	} else {
+		DDRB &= ~(1 << 2); PORTB &= ~(1 << 2);
+	}
+
+	if (usb_led & (1 << USB_LED_SCROLL_LOCK)) {
+
+	} else {
+
+	}
+
+	if (usb_led & (1 << USB_LED_COMPOSE)) {
+
+	} else {
+
+	}
+
+	if (usb_led & (1 << USB_LED_KANA)) {
+
+	} else {
+
+	}
+
+}

keyboards/1up60rgb/keymaps/tsangan/keymap.c

@@ -0,0 +1,72 @@
+#include "1up60rgb.h"
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+
+	KEYMAP(
+		KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSLS, KC_GRV,
+		KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSPC,
+		KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, KC_ENT,
+		KC_LSFT, KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, MO(1),
+		KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_NO, KC_RALT, KC_RGUI, KC_RCTL),
+
+	KEYMAP(
+		RESET, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_TRNS, KC_DEL,
+		KC_TRNS, BL_TOGG, BL_DEC, BL_INC, BL_STEP, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_PSCR, KC_UP, KC_TRNS, KC_TRNS,
+		KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_LEFT, KC_RGHT, KC_TRNS, KC_TRNS,
+		KC_TRNS, KC_TRNS, RGB_TOG, RGB_MOD, RGB_HUI, RGB_HUD, RGB_SAI, RGB_SAD, RGB_VAI, RGB_VAD, KC_TRNS, KC_DOWN, KC_TRNS, KC_TRNS,
+		KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS)
+
+};
+
+const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) {
+	;
+
+	switch (id) {
+
+	}
+	return MACRO_NONE;
+}
+
+void matrix_init_user(void) {
+}
+
+void matrix_scan_user(void) {
+}
+
+bool process_record_user(uint16_t keycode, keyrecord_t *record) {
+	return true;
+}
+
+void led_set_user(uint8_t usb_led) {
+
+	if (usb_led & (1 << USB_LED_NUM_LOCK)) {
+
+	} else {
+
+	}
+
+	if (usb_led & (1 << USB_LED_CAPS_LOCK)) {
+		DDRB |= (1 << 2); PORTB &= ~(1 << 2);
+	} else {
+		DDRB &= ~(1 << 2); PORTB &= ~(1 << 2);
+	}
+
+	if (usb_led & (1 << USB_LED_SCROLL_LOCK)) {
+
+	} else {
+
+	}
+
+	if (usb_led & (1 << USB_LED_COMPOSE)) {
+
+	} else {
+
+	}
+
+	if (usb_led & (1 << USB_LED_KANA)) {
+
+	} else {
+
+	}
+
+}

keyboards/1up60rgb/readme.md

@@ -0,0 +1,13 @@
+# 1upkeyboards 60% RGB
+
+Firmware for custom keyboard PCB with 60% key layout.
+
+Keyboard Maintainer: [rempired](https://github.com/rempired)  
+Hardware Supported: 1upkeyboards 60% RGB  
+Hardware Availability: [1upkeyboards](https://1upkeyboards.com/rgb-underglow-1up-pcb.html)
+
+Make example for this keyboard (after setting up your build environment):
+
+    make 1up60rgb:default
+
+See [build environment setup](https://docs.qmk.fm/build_environment_setup.html) then the [make instructions](https://docs.qmk.fm/make_instructions.html) for more information.

keyboards/1up60rgb/rules.mk

@@ -0,0 +1,56 @@
+# MCU name
+MCU = atmega32u4
+
+# Processor frequency.
+#     This will define a symbol, F_CPU, in all source code files equal to the
+#     processor frequency in Hz. You can then use this symbol in your source code to
+#     calculate timings. Do NOT tack on a 'UL' at the end, this will be done
+#     automatically to create a 32-bit value in your source code.
+#
+#     This will be an integer division of F_USB below, as it is sourced by
+#     F_USB after it has run through any CPU prescalers. Note that this value
+#     does not *change* the processor frequency - it should merely be updated to
+#     reflect the processor speed set externally so that the code can use accurate
+#     software delays.
+F_CPU = 16000000
+
+#
+# LUFA specific
+#
+# Target architecture (see library "Board Types" documentation).
+ARCH = AVR8
+
+# Input clock frequency.
+#     This will define a symbol, F_USB, in all source code files equal to the
+#     input clock frequency (before any prescaling is performed) in Hz. This value may
+#     differ from F_CPU if prescaling is used on the latter, and is required as the
+#     raw input clock is fed directly to the PLL sections of the AVR for high speed
+#     clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
+#     at the end, this will be done automatically to create a 32-bit value in your
+#     source code.
+#
+#     If no clock division is performed on the input clock inside the AVR (via the
+#     CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
+F_USB = $(F_CPU)
+
+# Interrupt driven control endpoint task(+60)
+OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
+
+
+# Boot Section Size in *bytes*
+OPT_DEFS += -DBOOTLOADER_SIZE=4096
+
+
+# Build Options
+#   comment out to disable the options.
+#
+BOOTMAGIC_ENABLE ?= yes	# Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE ?= yes	# Mouse keys(+4700)
+EXTRAKEY_ENABLE ?= yes	# Audio control and System control(+450)
+CONSOLE_ENABLE ?= no	# Console for debug(+400)
+COMMAND_ENABLE ?= no    # Commands for debug and configuration
+SLEEP_LED_ENABLE ?= no  # Breathing sleep LED during USB suspend
+NKRO_ENABLE ?= yes		# USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+BACKLIGHT_ENABLE ?= yes  # Enable keyboard backlight functionality
+AUDIO_ENABLE ?= no
+RGBLIGHT_ENABLE ?= yes

keyboards/_qmk_handwire/_qmk_handwire.c

@@ -0,0 +1,25 @@
+/* Copyright 2017 skully <skullydazed@gmail.com>
+ *           2018 Jack Humbert <jack.humb@gmail.com>
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#include "_qmk_handwire.h"
+
+void matrix_init_kb(void) {
+
+}
+
+void matrix_scan_kb(void) {
+
+}

keyboards/_qmk_handwire/_qmk_handwire.h

@@ -0,0 +1,59 @@
+/* Copyright 2017 skully <skullydazed@gmail.com>
+ *           2018 Jack Humbert <jack.humb@gmail.com>
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#ifndef QMK_HANDWIRE_H
+#define QMK_HANDWIRE_H
+
+#include "quantum.h"
+
+/*
+ * These are shortcuts to help you work with the various layout options. If your 
+ * keymap works with one of the LAYOUT_...() macros you are encouraged to use that
+ * and to contribute your keymap to the corresponding layout in 
+ * `qmk_firmware/layouts/community`.
+ */
+
+/* The fully-featured KEYMAP() that has every single key available in the matrix.
+ */
+#define KEYMAP(\
+    j00, j01, j02, j03, j04, j05, j06, \
+    j10, j11, j12, j13, j14, j15, j16, \
+    j20, j21, j22, j23, j24, j25, j26, \
+    j30, j31, j32, j33, j34, j35, \
+    j40, j41, j42, j43, j44, \
+                        j54, j55, j56, \
+    k00, k01, k02, k03, k04, k05, k06, \
+    k10, k11, k12, k13, k14, k15, k16, \
+    k20, k21, k22, k23, k24, k25, k26, \
+         k31, k32, k33, k34, k35, k36, \
+              k42, k43, k44, k45, k46, \
+    k50, k51, k52 \
+) { \
+    { j00, j01, j02, j03, j04, j05, j06 }, \
+    { j10, j11, j12, j13, j14, j15, j16 }, \
+    { j20, j21, j22, j23, j24, j25, j26 }, \
+    { j30, j31, j32, j33, j34, j35, 0   }, \
+    { j40, j41, j42, j43, j44, 0,   0   }, \
+    { 0,   0,   0,   0,   j54, j55, j56 }, \
+    { k00, k01, k02, k03, k04, k05, k06 }, \
+    { k10, k11, k12, k13, k14, k15, k16 }, \
+    { k20, k21, k22, k23, k24, k25, k26 }, \
+    { 0,   k31, k32, k33, k34, k35, k36 }, \
+    { 0,   0,   k42, k43, k44, k45, k46 }, \
+    { k50, k51, k52, 0,   0,   0,   0   } \
+}
+
+#endif

keyboards/_qmk_handwire/boards/GENERIC_STM32_F303XC/board.c

@@ -0,0 +1,126 @@
+/*
+    ChibiOS - Copyright (C) 2006..2016 Giovanni Di Sirio
+
+    Licensed under the Apache License, Version 2.0 (the "License");
+    you may not use this file except in compliance with the License.
+    You may obtain a copy of the License at
+
+        http://www.apache.org/licenses/LICENSE-2.0
+
+    Unless required by applicable law or agreed to in writing, software
+    distributed under the License is distributed on an "AS IS" BASIS,
+    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+    See the License for the specific language governing permissions and
+    limitations under the License.
+*/
+
+#include "hal.h"
+
+#if HAL_USE_PAL || defined(__DOXYGEN__)
+/**
+ * @brief   PAL setup.
+ * @details Digital I/O ports static configuration as defined in @p board.h.
+ *          This variable is used by the HAL when initializing the PAL driver.
+ */
+const PALConfig pal_default_config = {
+#if STM32_HAS_GPIOA
+  {VAL_GPIOA_MODER, VAL_GPIOA_OTYPER, VAL_GPIOA_OSPEEDR, VAL_GPIOA_PUPDR,
+   VAL_GPIOA_ODR,   VAL_GPIOA_AFRL,   VAL_GPIOA_AFRH},
+#endif
+#if STM32_HAS_GPIOB
+  {VAL_GPIOB_MODER, VAL_GPIOB_OTYPER, VAL_GPIOB_OSPEEDR, VAL_GPIOB_PUPDR,
+   VAL_GPIOB_ODR,   VAL_GPIOB_AFRL,   VAL_GPIOB_AFRH},
+#endif
+#if STM32_HAS_GPIOC
+  {VAL_GPIOC_MODER, VAL_GPIOC_OTYPER, VAL_GPIOC_OSPEEDR, VAL_GPIOC_PUPDR,
+   VAL_GPIOC_ODR,   VAL_GPIOC_AFRL,   VAL_GPIOC_AFRH},
+#endif
+#if STM32_HAS_GPIOD
+  {VAL_GPIOD_MODER, VAL_GPIOD_OTYPER, VAL_GPIOD_OSPEEDR, VAL_GPIOD_PUPDR,
+   VAL_GPIOD_ODR,   VAL_GPIOD_AFRL,   VAL_GPIOD_AFRH},
+#endif
+#if STM32_HAS_GPIOE
+  {VAL_GPIOE_MODER, VAL_GPIOE_OTYPER, VAL_GPIOE_OSPEEDR, VAL_GPIOE_PUPDR,
+   VAL_GPIOE_ODR,   VAL_GPIOE_AFRL,   VAL_GPIOE_AFRH},
+#endif
+#if STM32_HAS_GPIOF
+  {VAL_GPIOF_MODER, VAL_GPIOF_OTYPER, VAL_GPIOF_OSPEEDR, VAL_GPIOF_PUPDR,
+   VAL_GPIOF_ODR,   VAL_GPIOF_AFRL,   VAL_GPIOF_AFRH},
+#endif
+#if STM32_HAS_GPIOG
+  {VAL_GPIOG_MODER, VAL_GPIOG_OTYPER, VAL_GPIOG_OSPEEDR, VAL_GPIOG_PUPDR,
+   VAL_GPIOG_ODR,   VAL_GPIOG_AFRL,   VAL_GPIOG_AFRH},
+#endif
+#if STM32_HAS_GPIOH
+  {VAL_GPIOH_MODER, VAL_GPIOH_OTYPER, VAL_GPIOH_OSPEEDR, VAL_GPIOH_PUPDR,
+   VAL_GPIOH_ODR,   VAL_GPIOH_AFRL,   VAL_GPIOH_AFRH},
+#endif
+#if STM32_HAS_GPIOI
+  {VAL_GPIOI_MODER, VAL_GPIOI_OTYPER, VAL_GPIOI_OSPEEDR, VAL_GPIOI_PUPDR,
+   VAL_GPIOI_ODR,   VAL_GPIOI_AFRL,   VAL_GPIOI_AFRH}
+#endif
+};
+#endif
+
+void enter_bootloader_mode_if_requested(void);
+
+/**
+ * @brief   Early initialization code.
+ * @details This initialization must be performed just after stack setup
+ *          and before any other initialization.
+ */
+void __early_init(void) {
+  enter_bootloader_mode_if_requested();
+  stm32_clock_init();
+}
+
+#if HAL_USE_SDC || defined(__DOXYGEN__)
+/**
+ * @brief   SDC card detection.
+ */
+bool sdc_lld_is_card_inserted(SDCDriver *sdcp) {
+
+  (void)sdcp;
+  /* TODO: Fill the implementation.*/
+  return true;
+}
+
+/**
+ * @brief   SDC card write protection detection.
+ */
+bool sdc_lld_is_write_protected(SDCDriver *sdcp) {
+
+  (void)sdcp;
+  /* TODO: Fill the implementation.*/
+  return false;
+}
+#endif /* HAL_USE_SDC */
+
+#if HAL_USE_MMC_SPI || defined(__DOXYGEN__)
+/**
+ * @brief   MMC_SPI card detection.
+ */
+bool mmc_lld_is_card_inserted(MMCDriver *mmcp) {
+
+  (void)mmcp;
+  /* TODO: Fill the implementation.*/
+  return true;
+}
+
+/**
+ * @brief   MMC_SPI card write protection detection.
+ */
+bool mmc_lld_is_write_protected(MMCDriver *mmcp) {
+
+  (void)mmcp;
+  /* TODO: Fill the implementation.*/
+  return false;
+}
+#endif
+
+/**
+ * @brief   Board-specific initialization code.
+ * @todo    Add your board-specific code, if any.
+ */
+void boardInit(void) {
+}

keyboards/_qmk_handwire/boards/GENERIC_STM32_F303XC/board.mk

@@ -0,0 +1,5 @@
+# List of all the board related files.
+BOARDSRC = $(BOARD_PATH)/boards/GENERIC_STM32_F303XC/board.c
+
+# Required include directories
+BOARDINC = $(BOARD_PATH)/boards/GENERIC_STM32_F303XC

keyboards/_qmk_handwire/bootloader_defs.h

@@ -0,0 +1,7 @@
+/* Address for jumping to bootloader on STM32 chips. */
+/* It is chip dependent, the correct number can be looked up here:
+ * http://www.st.com/web/en/resource/technical/document/application_note/CD00167594.pdf
+ * This also requires a patch to chibios:
+ *  <tmk_dir>/tmk_core/tool/chibios/ch-bootloader-jump.patch
+ */
+#define STM32_BOOTLOADER_ADDRESS 0x1FFFD800

keyboards/_qmk_handwire/chconf.h

@@ -0,0 +1,520 @@
+/*
+    ChibiOS - Copyright (C) 2006..2016 Giovanni Di Sirio
+
+    Licensed under the Apache License, Version 2.0 (the "License");
+    you may not use this file except in compliance with the License.
+    You may obtain a copy of the License at
+
+        http://www.apache.org/licenses/LICENSE-2.0
+
+    Unless required by applicable law or agreed to in writing, software
+    distributed under the License is distributed on an "AS IS" BASIS,
+    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+    See the License for the specific language governing permissions and
+    limitations under the License.
+*/
+
+/**
+ * @file    templates/chconf.h
+ * @brief   Configuration file template.
+ * @details A copy of this file must be placed in each project directory, it
+ *          contains the application specific kernel settings.
+ *
+ * @addtogroup config
+ * @details Kernel related settings and hooks.
+ * @{
+ */
+
+#ifndef CHCONF_H
+#define CHCONF_H
+
+#define _CHIBIOS_RT_CONF_
+
+/*===========================================================================*/
+/**
+ * @name System timers settings
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief   System time counter resolution.
+ * @note    Allowed values are 16 or 32 bits.
+ */
+#define CH_CFG_ST_RESOLUTION                32
+
+/**
+ * @brief   System tick frequency.
+ * @details Frequency of the system timer that drives the system ticks. This
+ *          setting also defines the system tick time unit.
+ */
+#define CH_CFG_ST_FREQUENCY                 10000
+
+/**
+ * @brief   Time delta constant for the tick-less mode.
+ * @note    If this value is zero then the system uses the classic
+ *          periodic tick. This value represents the minimum number
+ *          of ticks that is safe to specify in a timeout directive.
+ *          The value one is not valid, timeouts are rounded up to
+ *          this value.
+ */
+#define CH_CFG_ST_TIMEDELTA                 2
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Kernel parameters and options
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief   Round robin interval.
+ * @details This constant is the number of system ticks allowed for the
+ *          threads before preemption occurs. Setting this value to zero
+ *          disables the preemption for threads with equal priority and the
+ *          round robin becomes cooperative. Note that higher priority
+ *          threads can still preempt, the kernel is always preemptive.
+ * @note    Disabling the round robin preemption makes the kernel more compact
+ *          and generally faster.
+ * @note    The round robin preemption is not supported in tickless mode and
+ *          must be set to zero in that case.
+ */
+#define CH_CFG_TIME_QUANTUM                 0
+
+/**
+ * @brief   Managed RAM size.
+ * @details Size of the RAM area to be managed by the OS. If set to zero
+ *          then the whole available RAM is used. The core memory is made
+ *          available to the heap allocator and/or can be used directly through
+ *          the simplified core memory allocator.
+ *
+ * @note    In order to let the OS manage the whole RAM the linker script must
+ *          provide the @p __heap_base__ and @p __heap_end__ symbols.
+ * @note    Requires @p CH_CFG_USE_MEMCORE.
+ */
+#define CH_CFG_MEMCORE_SIZE                 0
+
+/**
+ * @brief   Idle thread automatic spawn suppression.
+ * @details When this option is activated the function @p chSysInit()
+ *          does not spawn the idle thread. The application @p main()
+ *          function becomes the idle thread and must implement an
+ *          infinite loop.
+ */
+#define CH_CFG_NO_IDLE_THREAD               FALSE
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Performance options
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief   OS optimization.
+ * @details If enabled then time efficient rather than space efficient code
+ *          is used when two possible implementations exist.
+ *
+ * @note    This is not related to the compiler optimization options.
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_OPTIMIZE_SPEED               TRUE
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Subsystem options
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief   Time Measurement APIs.
+ * @details If enabled then the time measurement APIs are included in
+ *          the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_TM                       TRUE
+
+/**
+ * @brief   Threads registry APIs.
+ * @details If enabled then the registry APIs are included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_REGISTRY                 TRUE
+
+/**
+ * @brief   Threads synchronization APIs.
+ * @details If enabled then the @p chThdWait() function is included in
+ *          the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_WAITEXIT                 TRUE
+
+/**
+ * @brief   Semaphores APIs.
+ * @details If enabled then the Semaphores APIs are included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_SEMAPHORES               TRUE
+
+/**
+ * @brief   Semaphores queuing mode.
+ * @details If enabled then the threads are enqueued on semaphores by
+ *          priority rather than in FIFO order.
+ *
+ * @note    The default is @p FALSE. Enable this if you have special
+ *          requirements.
+ * @note    Requires @p CH_CFG_USE_SEMAPHORES.
+ */
+#define CH_CFG_USE_SEMAPHORES_PRIORITY      FALSE
+
+/**
+ * @brief   Mutexes APIs.
+ * @details If enabled then the mutexes APIs are included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_MUTEXES                  TRUE
+
+/**
+ * @brief   Enables recursive behavior on mutexes.
+ * @note    Recursive mutexes are heavier and have an increased
+ *          memory footprint.
+ *
+ * @note    The default is @p FALSE.
+ * @note    Requires @p CH_CFG_USE_MUTEXES.
+ */
+#define CH_CFG_USE_MUTEXES_RECURSIVE        FALSE
+
+/**
+ * @brief   Conditional Variables APIs.
+ * @details If enabled then the conditional variables APIs are included
+ *          in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ * @note    Requires @p CH_CFG_USE_MUTEXES.
+ */
+#define CH_CFG_USE_CONDVARS                 TRUE
+
+/**
+ * @brief   Conditional Variables APIs with timeout.
+ * @details If enabled then the conditional variables APIs with timeout
+ *          specification are included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ * @note    Requires @p CH_CFG_USE_CONDVARS.
+ */
+#define CH_CFG_USE_CONDVARS_TIMEOUT         TRUE
+
+/**
+ * @brief   Events Flags APIs.
+ * @details If enabled then the event flags APIs are included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_EVENTS                   TRUE
+
+/**
+ * @brief   Events Flags APIs with timeout.
+ * @details If enabled then the events APIs with timeout specification
+ *          are included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ * @note    Requires @p CH_CFG_USE_EVENTS.
+ */
+#define CH_CFG_USE_EVENTS_TIMEOUT           TRUE
+
+/**
+ * @brief   Synchronous Messages APIs.
+ * @details If enabled then the synchronous messages APIs are included
+ *          in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_MESSAGES                 TRUE
+
+/**
+ * @brief   Synchronous Messages queuing mode.
+ * @details If enabled then messages are served by priority rather than in
+ *          FIFO order.
+ *
+ * @note    The default is @p FALSE. Enable this if you have special
+ *          requirements.
+ * @note    Requires @p CH_CFG_USE_MESSAGES.
+ */
+#define CH_CFG_USE_MESSAGES_PRIORITY        TRUE
+
+/**
+ * @brief   Mailboxes APIs.
+ * @details If enabled then the asynchronous messages (mailboxes) APIs are
+ *          included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ * @note    Requires @p CH_CFG_USE_SEMAPHORES.
+ */
+#define CH_CFG_USE_MAILBOXES                TRUE
+
+/**
+ * @brief   Core Memory Manager APIs.
+ * @details If enabled then the core memory manager APIs are included
+ *          in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_MEMCORE                  TRUE
+
+/**
+ * @brief   Heap Allocator APIs.
+ * @details If enabled then the memory heap allocator APIs are included
+ *          in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ * @note    Requires @p CH_CFG_USE_MEMCORE and either @p CH_CFG_USE_MUTEXES or
+ *          @p CH_CFG_USE_SEMAPHORES.
+ * @note    Mutexes are recommended.
+ */
+#define CH_CFG_USE_HEAP                     TRUE
+
+/**
+ * @brief   Memory Pools Allocator APIs.
+ * @details If enabled then the memory pools allocator APIs are included
+ *          in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_MEMPOOLS                 TRUE
+
+/**
+ * @brief   Dynamic Threads APIs.
+ * @details If enabled then the dynamic threads creation APIs are included
+ *          in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ * @note    Requires @p CH_CFG_USE_WAITEXIT.
+ * @note    Requires @p CH_CFG_USE_HEAP and/or @p CH_CFG_USE_MEMPOOLS.
+ */
+#define CH_CFG_USE_DYNAMIC                  TRUE
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Debug options
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief   Debug option, kernel statistics.
+ *
+ * @note    The default is @p FALSE.
+ */
+#define CH_DBG_STATISTICS                   FALSE
+
+/**
+ * @brief   Debug option, system state check.
+ * @details If enabled the correct call protocol for system APIs is checked
+ *          at runtime.
+ *
+ * @note    The default is @p FALSE.
+ */
+#define CH_DBG_SYSTEM_STATE_CHECK           FALSE
+
+/**
+ * @brief   Debug option, parameters checks.
+ * @details If enabled then the checks on the API functions input
+ *          parameters are activated.
+ *
+ * @note    The default is @p FALSE.
+ */
+#define CH_DBG_ENABLE_CHECKS                FALSE
+
+/**
+ * @brief   Debug option, consistency checks.
+ * @details If enabled then all the assertions in the kernel code are
+ *          activated. This includes consistency checks inside the kernel,
+ *          runtime anomalies and port-defined checks.
+ *
+ * @note    The default is @p FALSE.
+ */
+#define CH_DBG_ENABLE_ASSERTS               FALSE
+
+/**
+ * @brief   Debug option, trace buffer.
+ * @details If enabled then the trace buffer is activated.
+ *
+ * @note    The default is @p CH_DBG_TRACE_MASK_DISABLED.
+ */
+#define CH_DBG_TRACE_MASK                   CH_DBG_TRACE_MASK_DISABLED
+
+/**
+ * @brief   Trace buffer entries.
+ * @note    The trace buffer is only allocated if @p CH_DBG_TRACE_MASK is
+ *          different from @p CH_DBG_TRACE_MASK_DISABLED.
+ */
+#define CH_DBG_TRACE_BUFFER_SIZE            128
+
+/**
+ * @brief   Debug option, stack checks.
+ * @details If enabled then a runtime stack check is performed.
+ *
+ * @note    The default is @p FALSE.
+ * @note    The stack check is performed in a architecture/port dependent way.
+ *          It may not be implemented or some ports.
+ * @note    The default failure mode is to halt the system with the global
+ *          @p panic_msg variable set to @p NULL.
+ */
+#define CH_DBG_ENABLE_STACK_CHECK           TRUE
+
+/**
+ * @brief   Debug option, stacks initialization.
+ * @details If enabled then the threads working area is filled with a byte
+ *          value when a thread is created. This can be useful for the
+ *          runtime measurement of the used stack.
+ *
+ * @note    The default is @p FALSE.
+ */
+#define CH_DBG_FILL_THREADS                 FALSE
+
+/**
+ * @brief   Debug option, threads profiling.
+ * @details If enabled then a field is added to the @p thread_t structure that
+ *          counts the system ticks occurred while executing the thread.
+ *
+ * @note    The default is @p FALSE.
+ * @note    This debug option is not currently compatible with the
+ *          tickless mode.
+ */
+#define CH_DBG_THREADS_PROFILING            FALSE
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Kernel hooks
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief   Threads descriptor structure extension.
+ * @details User fields added to the end of the @p thread_t structure.
+ */
+#define CH_CFG_THREAD_EXTRA_FIELDS                                          \
+  /* Add threads custom fields here.*/
+
+/**
+ * @brief   Threads initialization hook.
+ * @details User initialization code added to the @p chThdInit() API.
+ *
+ * @note    It is invoked from within @p chThdInit() and implicitly from all
+ *          the threads creation APIs.
+ */
+#define CH_CFG_THREAD_INIT_HOOK(tp) {                                       \
+  /* Add threads initialization code here.*/                                \
+}
+
+/**
+ * @brief   Threads finalization hook.
+ * @details User finalization code added to the @p chThdExit() API.
+ */
+#define CH_CFG_THREAD_EXIT_HOOK(tp) {                                       \
+  /* Add threads finalization code here.*/                                  \
+}
+
+/**
+ * @brief   Context switch hook.
+ * @details This hook is invoked just before switching between threads.
+ */
+#define CH_CFG_CONTEXT_SWITCH_HOOK(ntp, otp) {                              \
+  /* Context switch code here.*/                                            \
+}
+
+/**
+ * @brief   ISR enter hook.
+ */
+#define CH_CFG_IRQ_PROLOGUE_HOOK() {                                        \
+  /* IRQ prologue code here.*/                                              \
+}
+
+/**
+ * @brief   ISR exit hook.
+ */
+#define CH_CFG_IRQ_EPILOGUE_HOOK() {                                        \
+  /* IRQ epilogue code here.*/                                              \
+}
+
+/**
+ * @brief   Idle thread enter hook.
+ * @note    This hook is invoked within a critical zone, no OS functions
+ *          should be invoked from here.
+ * @note    This macro can be used to activate a power saving mode.
+ */
+#define CH_CFG_IDLE_ENTER_HOOK() {                                          \
+  /* Idle-enter code here.*/                                                \
+}
+
+/**
+ * @brief   Idle thread leave hook.
+ * @note    This hook is invoked within a critical zone, no OS functions
+ *          should be invoked from here.
+ * @note    This macro can be used to deactivate a power saving mode.
+ */
+#define CH_CFG_IDLE_LEAVE_HOOK() {                                          \
+  /* Idle-leave code here.*/                                                \
+}
+
+/**
+ * @brief   Idle Loop hook.
+ * @details This hook is continuously invoked by the idle thread loop.
+ */
+#define CH_CFG_IDLE_LOOP_HOOK() {                                           \
+  /* Idle loop code here.*/                                                 \
+}
+
+/**
+ * @brief   System tick event hook.
+ * @details This hook is invoked in the system tick handler immediately
+ *          after processing the virtual timers queue.
+ */
+#define CH_CFG_SYSTEM_TICK_HOOK() {                                         \
+  /* System tick event code here.*/                                         \
+}
+
+/**
+ * @brief   System halt hook.
+ * @details This hook is invoked in case to a system halting error before
+ *          the system is halted.
+ */
+#define CH_CFG_SYSTEM_HALT_HOOK(reason) {                                   \
+  /* System halt code here.*/                                               \
+}
+
+/**
+ * @brief   Trace hook.
+ * @details This hook is invoked each time a new record is written in the
+ *          trace buffer.
+ */
+#define CH_CFG_TRACE_HOOK(tep) {                                            \
+  /* Trace code here.*/                                                     \
+}
+
+/** @} */
+
+/*===========================================================================*/
+/* Port-specific settings (override port settings defaulted in chcore.h).    */
+/*===========================================================================*/
+
+#endif  /* CHCONF_H */
+
+/** @} */

keyboards/_qmk_handwire/config.h

@@ -0,0 +1,134 @@
+/*
+ * Copyright 2017 skully <skullydazed@gmail.com>
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#ifndef CONFIG_H
+#define CONFIG_H
+
+/* USB Device descriptor parameter */
+#define VENDOR_ID       0x125A
+#define PRODUCT_ID      0x1770
+#define DEVICE_VER      0x0001
+#define MANUFACTURER    QMK
+#define PRODUCT         Handwire
+#define DESCRIPTION     "Handwire protoboard"
+
+/* key matrix size */
+#define MATRIX_ROWS 12
+#define MATRIX_COLS 7
+
+/*
+ * Keyboard Matrix Assignments
+ *
+ * Change this to how you wired your keyboard
+ * COLS: AVR pins used for columns, left to right
+ * ROWS: AVR pins used for rows, top to bottom
+ * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
+ *                  ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
+ *
+*/
+/* Note: These are not used for arm boards. They're here purely as documentation.
+ * #define MATRIX_ROW_PINS { PB0, PB1, PB2, PA15, PA10 }
+ * #define MATRIX_COL_PINS { PA2, PA3, PA6, PB14, PB15, PA8, PA9, PA7, PB3, PB4, PC14, PC15, PC13, PB5, PB6 }
+ * #define UNUSED_PINS
+ */
+
+/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
+#define DEBOUNCE 6
+
+/* Prevent modifiers from being stuck on after layer changes. */
+#define PREVENT_STUCK_MODIFIERS
+
+/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
+//#define LOCKING_SUPPORT_ENABLE
+/* Locking resynchronize hack */
+//#define LOCKING_RESYNC_ENABLE
+
+/*
+ * Force NKRO
+ *
+ * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
+ * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
+ * makefile for this to work.)
+ *
+ * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
+ * until the next keyboard reset.
+ *
+ * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
+ * fully operational during normal computer usage.
+ *
+ * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
+ * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
+ * bootmagic, NKRO mode will always be enabled until it is toggled again during a
+ * power-up.
+ *
+ */
+//#define FORCE_NKRO
+
+/* key combination for magic key command */
+#define IS_COMMAND() ( \
+	keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
+)
+
+/*
+ * Feature disable options
+ *  These options are also useful to firmware size reduction.
+ */
+
+/* disable debug print */
+//#define NO_DEBUG
+
+/* disable print */
+//#define NO_PRINT
+
+/* disable action features */
+//#define NO_ACTION_LAYER
+//#define NO_ACTION_TAPPING
+//#define NO_ACTION_ONESHOT
+//#define NO_ACTION_MACRO
+//#define NO_ACTION_FUNCTION
+
+/*
+ * MIDI options
+ */
+
+/* Prevent use of disabled MIDI features in the keymap */
+//#define MIDI_ENABLE_STRICT 1
+
+/* enable basic MIDI features:
+   - MIDI notes can be sent when in Music mode is on
+*/
+//#define MIDI_BASIC
+
+/* enable advanced MIDI features:
+   - MIDI notes can be added to the keymap
+   - Octave shift and transpose
+   - Virtual sustain, portamento, and modulation wheel
+   - etc.
+*/
+//#define MIDI_ADVANCED
+
+/* override number of MIDI tone keycodes (each octave adds 12 keycodes and allocates 12 bytes) */
+//#define MIDI_TONE_KEYCODE_OCTAVES 1
+
+ /* Backlight configuration
+ */
+#define BACKLIGHT_LEVELS 1
+
+#define NO_USB_STARTUP_CHECK
+
+#endif
+

keyboards/_qmk_handwire/halconf.h

@@ -0,0 +1,395 @@
+/*
+    ChibiOS - Copyright (C) 2006..2016 Giovanni Di Sirio
+
+    Licensed under the Apache License, Version 2.0 (the "License");
+    you may not use this file except in compliance with the License.
+    You may obtain a copy of the License at
+
+        http://www.apache.org/licenses/LICENSE-2.0
+
+    Unless required by applicable law or agreed to in writing, software
+    distributed under the License is distributed on an "AS IS" BASIS,
+    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+    See the License for the specific language governing permissions and
+    limitations under the License.
+*/
+
+/**
+ * @file    templates/halconf.h
+ * @brief   HAL configuration header.
+ * @details HAL configuration file, this file allows to enable or disable the
+ *          various device drivers from your application. You may also use
+ *          this file in order to override the device drivers default settings.
+ *
+ * @addtogroup HAL_CONF
+ * @{
+ */
+
+#ifndef HALCONF_H
+#define HALCONF_H
+
+#include "mcuconf.h"
+
+/**
+ * @brief   Enables the PAL subsystem.
+ */
+#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__)
+#define HAL_USE_PAL                 TRUE
+#endif
+
+/**
+ * @brief   Enables the ADC subsystem.
+ */
+#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__)
+#define HAL_USE_ADC                 FALSE
+#endif
+
+/**
+ * @brief   Enables the CAN subsystem.
+ */
+#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__)
+#define HAL_USE_CAN                 FALSE
+#endif
+
+/**
+ * @brief   Enables the DAC subsystem.
+ */
+#if !defined(HAL_USE_DAC) || defined(__DOXYGEN__)
+#define HAL_USE_DAC                 TRUE
+#endif
+
+/**
+ * @brief   Enables the EXT subsystem.
+ */
+#if !defined(HAL_USE_EXT) || defined(__DOXYGEN__)
+#define HAL_USE_EXT                 FALSE
+#endif
+
+/**
+ * @brief   Enables the GPT subsystem.
+ */
+#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__)
+#define HAL_USE_GPT                 TRUE
+#endif
+
+/**
+ * @brief   Enables the I2C subsystem.
+ */
+#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__)
+#define HAL_USE_I2C                 TRUE
+#endif
+
+/**
+ * @brief   Enables the I2C Slave subsystem.
+ */
+#if !defined(HAL_USE_I2C_SLAVE) || defined(__DOXYGEN__)
+#define HAL_USE_I2C_SLAVE           TRUE
+#endif
+
+/**
+ * @brief   Enables the I2S subsystem.
+ */
+#if !defined(HAL_USE_I2S) || defined(__DOXYGEN__)
+#define HAL_USE_I2S                 FALSE
+#endif
+
+/**
+ * @brief   Enables the ICU subsystem.
+ */
+#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__)
+#define HAL_USE_ICU                 FALSE
+#endif
+
+/**
+ * @brief   Enables the MAC subsystem.
+ */
+#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__)
+#define HAL_USE_MAC                 FALSE
+#endif
+
+/**
+ * @brief   Enables the MMC_SPI subsystem.
+ */
+#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__)
+#define HAL_USE_MMC_SPI             FALSE
+#endif
+
+/**
+ * @brief   Enables the PWM subsystem.
+ */
+#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__)
+#define HAL_USE_PWM                 FALSE
+#endif
+
+/**
+ * @brief   Enables the QSPI subsystem.
+ */
+#if !defined(HAL_USE_QSPI) || defined(__DOXYGEN__)
+#define HAL_USE_QSPI                FALSE
+#endif
+
+/**
+ * @brief   Enables the RTC subsystem.
+ */
+#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__)
+#define HAL_USE_RTC                 FALSE
+#endif
+
+/**
+ * @brief   Enables the SDC subsystem.
+ */
+#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__)
+#define HAL_USE_SDC                 FALSE
+#endif
+
+/**
+ * @brief   Enables the SERIAL subsystem.
+ */
+#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__)
+#define HAL_USE_SERIAL              FALSE
+#endif
+
+/**
+ * @brief   Enables the SERIAL over USB subsystem.
+ */
+#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__)
+#define HAL_USE_SERIAL_USB          TRUE
+#endif
+
+/**
+ * @brief   Enables the SPI subsystem.
+ */
+#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__)
+#define HAL_USE_SPI                 FALSE
+#endif
+
+/**
+ * @brief   Enables the UART subsystem.
+ */
+#if !defined(HAL_USE_UART) || defined(__DOXYGEN__)
+#define HAL_USE_UART                FALSE
+#endif
+
+/**
+ * @brief   Enables the USB subsystem.
+ */
+#if !defined(HAL_USE_USB) || defined(__DOXYGEN__)
+#define HAL_USE_USB                 TRUE
+#endif
+
+/**
+ * @brief   Enables the WDG subsystem.
+ */
+#if !defined(HAL_USE_WDG) || defined(__DOXYGEN__)
+#define HAL_USE_WDG                 FALSE
+#endif
+
+/*===========================================================================*/
+/* ADC driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Enables synchronous APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__)
+#define ADC_USE_WAIT                TRUE
+#endif
+
+/**
+ * @brief   Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
+#define ADC_USE_MUTUAL_EXCLUSION    TRUE
+#endif
+
+/*===========================================================================*/
+/* CAN driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Sleep mode related APIs inclusion switch.
+ */
+#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__)
+#define CAN_USE_SLEEP_MODE          TRUE
+#endif
+
+/*===========================================================================*/
+/* I2C driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Enables the mutual exclusion APIs on the I2C bus.
+ */
+#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
+#define I2C_USE_MUTUAL_EXCLUSION    TRUE
+#endif
+
+/*===========================================================================*/
+/* MAC driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Enables an event sources for incoming packets.
+ */
+#if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__)
+#define MAC_USE_ZERO_COPY           FALSE
+#endif
+
+/**
+ * @brief   Enables an event sources for incoming packets.
+ */
+#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__)
+#define MAC_USE_EVENTS              TRUE
+#endif
+
+/*===========================================================================*/
+/* MMC_SPI driver related settings.                                          */
+/*===========================================================================*/
+
+/**
+ * @brief   Delays insertions.
+ * @details If enabled this options inserts delays into the MMC waiting
+ *          routines releasing some extra CPU time for the threads with
+ *          lower priority, this may slow down the driver a bit however.
+ *          This option is recommended also if the SPI driver does not
+ *          use a DMA channel and heavily loads the CPU.
+ */
+#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__)
+#define MMC_NICE_WAITING            TRUE
+#endif
+
+/*===========================================================================*/
+/* SDC driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Number of initialization attempts before rejecting the card.
+ * @note    Attempts are performed at 10mS intervals.
+ */
+#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__)
+#define SDC_INIT_RETRY              100
+#endif
+
+/**
+ * @brief   Include support for MMC cards.
+ * @note    MMC support is not yet implemented so this option must be kept
+ *          at @p FALSE.
+ */
+#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__)
+#define SDC_MMC_SUPPORT             FALSE
+#endif
+
+/**
+ * @brief   Delays insertions.
+ * @details If enabled this options inserts delays into the MMC waiting
+ *          routines releasing some extra CPU time for the threads with
+ *          lower priority, this may slow down the driver a bit however.
+ */
+#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__)
+#define SDC_NICE_WAITING            TRUE
+#endif
+
+/*===========================================================================*/
+/* SERIAL driver related settings.                                           */
+/*===========================================================================*/
+
+/**
+ * @brief   Default bit rate.
+ * @details Configuration parameter, this is the baud rate selected for the
+ *          default configuration.
+ */
+#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__)
+#define SERIAL_DEFAULT_BITRATE      38400
+#endif
+
+/**
+ * @brief   Serial buffers size.
+ * @details Configuration parameter, you can change the depth of the queue
+ *          buffers depending on the requirements of your application.
+ * @note    The default is 16 bytes for both the transmission and receive
+ *          buffers.
+ */
+#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__)
+#define SERIAL_BUFFERS_SIZE         16
+#endif
+
+/*===========================================================================*/
+/* SERIAL_USB driver related setting.                                        */
+/*===========================================================================*/
+
+/**
+ * @brief   Serial over USB buffers size.
+ * @details Configuration parameter, the buffer size must be a multiple of
+ *          the USB data endpoint maximum packet size.
+ * @note    The default is 256 bytes for both the transmission and receive
+ *          buffers.
+ */
+#if !defined(SERIAL_USB_BUFFERS_SIZE) || defined(__DOXYGEN__)
+#define SERIAL_USB_BUFFERS_SIZE     256
+#endif
+
+/**
+ * @brief   Serial over USB number of buffers.
+ * @note    The default is 2 buffers.
+ */
+#if !defined(SERIAL_USB_BUFFERS_NUMBER) || defined(__DOXYGEN__)
+#define SERIAL_USB_BUFFERS_NUMBER   2
+#endif
+
+/*===========================================================================*/
+/* SPI driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Enables synchronous APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__)
+#define SPI_USE_WAIT                TRUE
+#endif
+
+/**
+ * @brief   Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
+#define SPI_USE_MUTUAL_EXCLUSION    TRUE
+#endif
+
+/*===========================================================================*/
+/* UART driver related settings.                                             */
+/*===========================================================================*/
+
+/**
+ * @brief   Enables synchronous APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(UART_USE_WAIT) || defined(__DOXYGEN__)
+#define UART_USE_WAIT               FALSE
+#endif
+
+/**
+ * @brief   Enables the @p uartAcquireBus() and @p uartReleaseBus() APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(UART_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
+#define UART_USE_MUTUAL_EXCLUSION   FALSE
+#endif
+
+/*===========================================================================*/
+/* USB driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Enables synchronous APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(USB_USE_WAIT) || defined(__DOXYGEN__)
+#define USB_USE_WAIT                TRUE
+#endif
+
+#endif /* HALCONF_H */
+
+/** @} */

keyboards/_qmk_handwire/keymaps/default/keymap.c

@@ -0,0 +1,126 @@
+#include "_qmk_handwire.h"
+
+#define _______ KC_TRNS
+
+enum keyboard_layers {
+    _BL,
+    _FL,
+    _CL
+};
+
+enum custom_keycodes {
+    S_BSKTC = SAFE_RANGE,
+    S_ODEJY,
+    S_RCKBY,
+    S_DOEDR,
+    S_SCALE,
+    S_ONEUP,
+    S_COIN,
+    S_SONIC,
+    S_ZELDA
+};
+
+#ifdef AUDIO_ENABLE
+  float song_basketcase[][2] = SONG(BASKET_CASE);
+  float song_ode_to_joy[][2]  = SONG(ODE_TO_JOY);
+  float song_rock_a_bye_baby[][2]  = SONG(ROCK_A_BYE_BABY);
+  float song_doe_a_deer[][2]  = SONG(DOE_A_DEER);
+  float song_scale[][2]  = SONG(MUSIC_SCALE_SOUND);
+  float song_coin[][2]  = SONG(COIN_SOUND);
+  float song_one_up[][2]  = SONG(ONE_UP_SOUND);
+  float song_sonic_ring[][2]  = SONG(SONIC_RING);
+  float song_zelda_puzzle[][2]  = SONG(ZELDA_PUZZLE);
+#endif
+
+const uint16_t keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+    [0] = KEYMAP(
+      KC_GRV,  KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_DEL,
+      KC_TAB,  KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,    KC_HOME,
+      KC_ESC,  KC_A,    KC_S,    KC_D,    KC_F,    KC_G,    KC_END,
+      KC_LSFT, KC_Z,    KC_X,    KC_C,    KC_V,    KC_N,
+      KC_NO,   KC_LCTL, KC_LALT, KC_LGUI, MO(1),
+                                          KC_SPC, MO(1), RESET,
+
+      KC_INS,  KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_BSPC,
+      KC_PGUP, KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,    KC_DEL,
+      KC_PGDN, KC_H,    KC_J,    KC_K,    KC_L,    KC_COLN, KC_QUOT,
+               KC_N,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH, KC_ENT,
+                        KC_RCTL, KC_LEFT, KC_DOWN, KC_UP,   KC_RGHT,
+      RESET, MO(2), KC_SPC
+    )
+    // [0] = KEYMAP(
+    //   KC_GRV,  KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_DEL,
+    //   KC_TAB,  KC_Q,    KC_W,    KC_F,    KC_P,    KC_G,    KC_HOME,
+    //   KC_ESC,  KC_A,    KC_R,    KC_S,    KC_T,    KC_D,    KC_END,
+    //   KC_LSFT, KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,
+    //   KC_NO,   KC_LCTL, KC_LALT, KC_LGUI, MO(1),
+    //                                       KC_SPC, MO(1), RESET,
+
+    //   KC_INS,  KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_BSPC,
+    //   KC_PGUP, KC_J,    KC_L,    KC_U,    KC_Y,    KC_COLN, KC_DEL,
+    //   KC_PGDN, KC_H,    KC_N,    KC_E,    KC_I,    KC_O,    KC_QUOT,
+    //            KC_K,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH, KC_ENT,
+    //                     KC_RGUI, KC_LEFT, KC_DOWN, KC_UP,   KC_RGHT,
+    //   RESET, MO(2), KC_SPC
+    // )
+};
+
+bool process_record_user(uint16_t keycode, keyrecord_t *record) {
+    switch (keycode) {
+        case S_BSKTC:
+            if (record->event.pressed) {
+                stop_all_notes();
+                PLAY_SONG(song_basketcase);
+            }
+            return false;
+        case S_ODEJY:
+            if (record->event.pressed) {
+                stop_all_notes();
+                PLAY_SONG(song_ode_to_joy);
+            }
+            return false;
+        case S_RCKBY:
+            if (record->event.pressed) {
+                stop_all_notes();
+                PLAY_SONG(song_rock_a_bye_baby);
+            }
+            return false;
+        case S_DOEDR:
+            if (record->event.pressed) {
+                stop_all_notes();
+                PLAY_SONG(song_doe_a_deer);
+            }
+            return false;
+        case S_SCALE:
+            if (record->event.pressed) {
+                stop_all_notes();
+                PLAY_SONG(song_scale);
+            }
+            return false;
+        case S_ONEUP:
+            if (record->event.pressed) {
+                stop_all_notes();
+                PLAY_SONG(song_one_up);
+            }
+            return false;
+        case S_COIN:
+            if (record->event.pressed) {
+                stop_all_notes();
+                PLAY_SONG(song_coin);
+            }
+            return false;
+        case S_SONIC:
+            if (record->event.pressed) {
+                stop_all_notes();
+                PLAY_SONG(song_sonic_ring);
+            }
+            return false;
+        case S_ZELDA:
+            if (record->event.pressed) {
+                stop_all_notes();
+                PLAY_SONG(song_zelda_puzzle);
+            }
+            return false;
+    }
+    return true;
+}

keyboards/_qmk_handwire/keymaps/default/readme.md

@@ -0,0 +1 @@
+# The default keymap for clueboard 60%

keyboards/_qmk_handwire/led.c

@@ -0,0 +1,53 @@
+/*
+ * Copyright 2017 skully <skullydazed@gmail.com>
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#include "hal.h"
+#include "backlight.h"
+#include "led.h"
+#include "printf.h"
+
+void backlight_init_ports(void) {
+    printf("backlight_init_ports()\n");
+    #ifdef BACKLIGHT_ENABLE
+    // palSetPadMode(GPIOB, 8, PAL_MODE_OUTPUT_PUSHPULL);
+    // palSetPad(GPIOB, 8);
+    #endif
+}
+
+void backlight_set(uint8_t level) {
+    printf("backlight_set(%d)\n", level);
+    #ifdef BACKLIGHT_ENABLE
+    if (level == 0) {
+        // Turn backlight off
+        // palSetPad(GPIOB, 8);
+    } else {
+        // Turn backlight on
+        // palClearPad(GPIOB, 8);
+    }
+    #endif
+}
+
+void led_set_kb(uint8_t usb_led) {
+    printf("led_set_kb(%d)\n", usb_led);
+    if (usb_led & (1<<USB_LED_CAPS_LOCK)) {
+        // Turn capslock on
+        // palSetPad(GPIOB, 7);
+    } else {
+        // Turn capslock off
+        // palClearPad(GPIOB, 7);
+    }
+}

keyboards/_qmk_handwire/matrix.c

@@ -0,0 +1,222 @@
+#include <stdint.h>
+#include <stdbool.h>
+#include <string.h>
+#include "hal.h"
+#include "timer.h"
+#include "wait.h"
+#include "printf.h"
+#include "backlight.h"
+#include "matrix.h"
+
+#include "usb_main.h"
+#include "twi2c.h"
+
+/* QMK Handwire
+ *
+ * Column pins are input with internal pull-down.
+ * Row pins are output and strobe with high.
+ * Key is high or 1 when it turns on.
+ *
+ *     col: { A13, A14, A15, B3, B4, B5, B6 }
+ *     row: { B10, B2, B1, B0, A7, A6 }
+ */
+/* matrix state(1:on, 0:off) */
+static matrix_row_t matrix[MATRIX_ROWS];
+static matrix_row_t matrix_debouncing[MATRIX_ROWS];
+static bool debouncing = false;
+static uint16_t debouncing_time = 0;
+
+static bool master = false;
+static bool right_hand = false;
+
+__attribute__ ((weak))
+void matrix_init_user(void) {}
+
+__attribute__ ((weak))
+void matrix_scan_user(void) {}
+
+__attribute__ ((weak))
+void matrix_init_kb(void) {
+  matrix_init_user();
+}
+
+__attribute__ ((weak))
+void matrix_scan_kb(void) {
+  matrix_scan_user();
+}
+
+void matrix_init(void) {
+    printf("matrix init\n");
+    // debug_matrix = true;
+
+    // C13 is connected to VCC on the right hand
+    palSetPadMode(GPIOC, 13, PAL_MODE_INPUT);
+    wait_us(20);
+    right_hand = palReadPad(GPIOC, 13);
+
+    // if USB is active, this is the master
+    // master = usbGetDriverStateI(&USB_DRIVER) == USB_ACTIVE;
+    master = right_hand;
+
+    if (master) {
+      twi2c_master_init();
+    } else {
+      twi2c_slave_init();
+    }
+
+    /* Column(sense) */
+    palSetPadMode(GPIOA, 13, PAL_MODE_INPUT_PULLDOWN);
+    palSetPadMode(GPIOA, 14, PAL_MODE_INPUT_PULLDOWN);
+    palSetPadMode(GPIOA, 15, PAL_MODE_INPUT_PULLDOWN);
+    palSetPadMode(GPIOB, 3,  PAL_MODE_INPUT_PULLDOWN);
+    palSetPadMode(GPIOB, 4,  PAL_MODE_INPUT_PULLDOWN);
+    palSetPadMode(GPIOB, 5,  PAL_MODE_INPUT_PULLDOWN);
+    palSetPadMode(GPIOB, 6,  PAL_MODE_INPUT_PULLDOWN);
+
+    /* Row(strobe) */
+    palSetPadMode(GPIOB, 10, PAL_MODE_OUTPUT_PUSHPULL);
+    palSetPadMode(GPIOB, 2,  PAL_MODE_OUTPUT_PUSHPULL);
+    palSetPadMode(GPIOB, 1,  PAL_MODE_OUTPUT_PUSHPULL);
+    palSetPadMode(GPIOB, 0,  PAL_MODE_OUTPUT_PUSHPULL);
+    palSetPadMode(GPIOA, 7,  PAL_MODE_OUTPUT_PUSHPULL);
+    palSetPadMode(GPIOA, 6,  PAL_MODE_OUTPUT_PUSHPULL);
+
+    memset(matrix, 0, MATRIX_ROWS * sizeof(matrix_row_t));
+    memset(matrix_debouncing, 0, MATRIX_ROWS * sizeof(matrix_row_t));
+
+    // palClearPad(GPIOB, 7);  // Turn off capslock
+    matrix_init_quantum();
+}
+
+matrix_row_t matrix_scan_common(uint8_t row) {
+  matrix_row_t data;
+
+  // strobe row { A6, A7, B0, B1, B2, B10 }
+  switch (row) {
+      case 5: palSetPad(GPIOA, 6); break;
+      case 4: palSetPad(GPIOA, 7); break;
+      case 3: palSetPad(GPIOB, 0); break;
+      case 2: palSetPad(GPIOB, 1); break;
+      case 1: palSetPad(GPIOB, 2); break;
+      case 0: palSetPad(GPIOB, 10); break;
+  }
+
+  // need wait to settle pin state
+  wait_us(20);
+
+  // read col data {  B6, B5, B4, B3, A15, A14, A13 }
+  data = (
+      (palReadPad(GPIOB, 6)  << 6 ) |
+      (palReadPad(GPIOB, 5)  << 5 ) |
+      (palReadPad(GPIOB, 4)  << 4 ) |
+      (palReadPad(GPIOB, 3)  << 3 ) |
+      (palReadPad(GPIOA, 15) << 2 ) |
+      (palReadPad(GPIOA, 14) << 1 ) |
+      (palReadPad(GPIOA, 13) << 0 )
+  );
+
+  // unstrobe row { A6, A7, B0, B1, B2, B10 }
+  switch (row) {
+      case 5: palClearPad(GPIOA, 6); break;
+      case 4: palClearPad(GPIOA, 7); break;
+      case 3: palClearPad(GPIOB, 0); break;
+      case 2: palClearPad(GPIOB, 1); break;
+      case 1: palClearPad(GPIOB, 2); break;
+      case 0: palClearPad(GPIOB, 10); break;
+  }
+
+  return data;
+}
+
+const uint8_t command[2] = { 0x01, 0x00 };
+uint8_t other_matrix[MATRIX_ROWS] = { 0 };
+
+void matrix_scan_master(void) {
+
+  msg_t resp;
+  // resp = twi2c_master_send(slaveI2Caddress/2, command, 2, other_matrix, US2ST(100));
+  resp = i2cMasterTransmitTimeout(&I2C_DRIVER, slaveI2Caddress/2, command, 2, other_matrix, MATRIX_ROWS / 2, MS2ST(100));
+  // resp = i2cMasterReceiveTimeout(&I2C_DRIVER, slaveI2Caddress/2, other_matrix, MATRIX_ROWS / 2, US2ST(100));
+  // printf("%x\n", resp);
+  // if (resp != MSG_OK) {
+  //   for (i = 0; i < MATRIX_ROWS / 2; i++) {
+  //     resp = i2cMasterReceiveTimeout(&I2C_DRIVER, slaveI2Caddress/2, other_matrix, MATRIX_ROWS / 2, US2ST(100));
+  //   }
+  // }
+
+  if (resp == MSG_OK) {
+    uint8_t * matrix_pointer;
+    if (right_hand) {
+      matrix_pointer = matrix;
+    } else {
+      matrix_pointer = matrix + (MATRIX_ROWS / 2);
+    }
+
+    memcpy(matrix_pointer, other_matrix, MATRIX_ROWS / 2);
+  }
+}
+
+uint8_t matrix_scan(void) {
+
+    for (int row = 0; row < MATRIX_ROWS; row++) {
+        matrix_row_t data = 0;
+
+        if ((right_hand && row >= 6) || (!right_hand && row < 6)) {
+          data = matrix_scan_common(row % 6);
+        }
+
+        if (matrix_debouncing[row] != data) {
+            matrix_debouncing[row] = data;
+            debouncing = true;
+            debouncing_time = timer_read();
+        }
+    }
+
+    if (debouncing && timer_elapsed(debouncing_time) > DEBOUNCE) {
+        for (int row = 0; row < MATRIX_ROWS; row++) {
+            matrix[row] = matrix_debouncing[row];
+        }
+        debouncing = false;
+    }
+
+    if (master) {
+      matrix_scan_master();
+    }
+
+    matrix_scan_quantum();
+
+    return 1;
+}
+
+bool matrix_is_on(uint8_t row, uint8_t col) {
+    return (matrix[row] & (1<<col));
+}
+
+matrix_row_t matrix_get_row(uint8_t row) {
+    return matrix[row];
+}
+
+void matrix_copy(matrix_row_t * copy) {
+  uint8_t * matrix_pointer;
+  if (right_hand) {
+    matrix_pointer = matrix + (MATRIX_ROWS / 2);
+  } else {
+    matrix_pointer = matrix;
+  }
+  memcpy(copy, matrix_pointer, MATRIX_ROWS / 2);
+}
+
+void matrix_print(void) {
+    printf("\nr/c 01234567\n");
+    for (uint8_t row = 0; row < MATRIX_ROWS; row++) {
+        printf("%X0: ", row);
+        matrix_row_t data = matrix_get_row(row);
+        for (int col = 0; col < MATRIX_COLS; col++) {
+            if (data & (1<<col))
+                printf("1");
+            else
+                printf("0");
+        }
+        printf("\n");
+    }
+}

keyboards/_qmk_handwire/mcuconf.h

@@ -0,0 +1,257 @@
+/*
+    ChibiOS - Copyright (C) 2006..2016 Giovanni Di Sirio
+
+    Licensed under the Apache License, Version 2.0 (the "License");
+    you may not use this file except in compliance with the License.
+    You may obtain a copy of the License at
+
+        http://www.apache.org/licenses/LICENSE-2.0
+
+    Unless required by applicable law or agreed to in writing, software
+    distributed under the License is distributed on an "AS IS" BASIS,
+    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+    See the License for the specific language governing permissions and
+    limitations under the License.
+*/
+
+#ifndef MCUCONF_H
+#define MCUCONF_H
+
+/*
+ * STM32F3xx drivers configuration.
+ * The following settings override the default settings present in
+ * the various device driver implementation headers.
+ * Note that the settings for each driver only have effect if the whole
+ * driver is enabled in halconf.h.
+ *
+ * IRQ priorities:
+ * 15...0       Lowest...Highest.
+ *
+ * DMA priorities:
+ * 0...3        Lowest...Highest.
+ */
+
+#define STM32F3xx_MCUCONF
+
+/*
+ * HAL driver system settings.
+ */
+#define STM32_NO_INIT                       FALSE
+#define STM32_PVD_ENABLE                    FALSE
+#define STM32_PLS                           STM32_PLS_LEV0
+#define STM32_HSI_ENABLED                   TRUE
+#define STM32_LSI_ENABLED                   TRUE
+#define STM32_HSE_ENABLED                   TRUE
+#define STM32_LSE_ENABLED                   FALSE
+#define STM32_SW                            STM32_SW_PLL
+#define STM32_PLLSRC                        STM32_PLLSRC_HSE
+#define STM32_PREDIV_VALUE                  1
+#define STM32_PLLMUL_VALUE                  9
+#define STM32_HPRE                          STM32_HPRE_DIV1
+#define STM32_PPRE1                         STM32_PPRE1_DIV2
+#define STM32_PPRE2                         STM32_PPRE2_DIV2
+#define STM32_MCOSEL                        STM32_MCOSEL_NOCLOCK
+#define STM32_ADC12PRES                     STM32_ADC12PRES_DIV1
+#define STM32_ADC34PRES                     STM32_ADC34PRES_DIV1
+#define STM32_USART1SW                      STM32_USART1SW_PCLK
+#define STM32_USART2SW                      STM32_USART2SW_PCLK
+#define STM32_USART3SW                      STM32_USART3SW_PCLK
+#define STM32_UART4SW                       STM32_UART4SW_PCLK
+#define STM32_UART5SW                       STM32_UART5SW_PCLK
+#define STM32_I2C1SW                        STM32_I2C1SW_SYSCLK
+#define STM32_I2C2SW                        STM32_I2C2SW_SYSCLK
+#define STM32_TIM1SW                        STM32_TIM1SW_PCLK2
+#define STM32_TIM8SW                        STM32_TIM8SW_PCLK2
+#define STM32_RTCSEL                        STM32_RTCSEL_LSI
+#define STM32_USB_CLOCK_REQUIRED            TRUE
+#define STM32_USBPRE                        STM32_USBPRE_DIV1P5
+
+#undef STM32_HSE_BYPASS
+// #error "oh no"
+// #endif
+
+/*
+ * ADC driver system settings.
+ */
+#define STM32_ADC_DUAL_MODE                 FALSE
+#define STM32_ADC_COMPACT_SAMPLES           FALSE
+#define STM32_ADC_USE_ADC1                  FALSE
+#define STM32_ADC_USE_ADC2                  FALSE
+#define STM32_ADC_USE_ADC3                  FALSE
+#define STM32_ADC_USE_ADC4                  FALSE
+#define STM32_ADC_ADC1_DMA_STREAM           STM32_DMA_STREAM_ID(1, 1)
+#define STM32_ADC_ADC2_DMA_STREAM           STM32_DMA_STREAM_ID(2, 1)
+#define STM32_ADC_ADC3_DMA_STREAM           STM32_DMA_STREAM_ID(2, 5)
+#define STM32_ADC_ADC4_DMA_STREAM           STM32_DMA_STREAM_ID(2, 2)
+#define STM32_ADC_ADC1_DMA_PRIORITY         2
+#define STM32_ADC_ADC2_DMA_PRIORITY         2
+#define STM32_ADC_ADC3_DMA_PRIORITY         2
+#define STM32_ADC_ADC4_DMA_PRIORITY         2
+#define STM32_ADC_ADC12_IRQ_PRIORITY        5
+#define STM32_ADC_ADC3_IRQ_PRIORITY         5
+#define STM32_ADC_ADC4_IRQ_PRIORITY         5
+#define STM32_ADC_ADC1_DMA_IRQ_PRIORITY     5
+#define STM32_ADC_ADC2_DMA_IRQ_PRIORITY     5
+#define STM32_ADC_ADC3_DMA_IRQ_PRIORITY     5
+#define STM32_ADC_ADC4_DMA_IRQ_PRIORITY     5
+#define STM32_ADC_ADC12_CLOCK_MODE          ADC_CCR_CKMODE_AHB_DIV1
+#define STM32_ADC_ADC34_CLOCK_MODE          ADC_CCR_CKMODE_AHB_DIV1
+
+/*
+ * CAN driver system settings.
+ */
+#define STM32_CAN_USE_CAN1                  FALSE
+#define STM32_CAN_CAN1_IRQ_PRIORITY         11
+
+/*
+ * DAC driver system settings.
+ */
+#define STM32_DAC_DUAL_MODE                 FALSE
+#define STM32_DAC_USE_DAC1_CH1              TRUE
+#define STM32_DAC_USE_DAC1_CH2              TRUE
+#define STM32_DAC_DAC1_CH1_IRQ_PRIORITY     10
+#define STM32_DAC_DAC1_CH2_IRQ_PRIORITY     10
+#define STM32_DAC_DAC1_CH1_DMA_PRIORITY     2
+#define STM32_DAC_DAC1_CH2_DMA_PRIORITY     2
+
+/*
+ * EXT driver system settings.
+ */
+#define STM32_EXT_EXTI0_IRQ_PRIORITY        6
+#define STM32_EXT_EXTI1_IRQ_PRIORITY        6
+#define STM32_EXT_EXTI2_IRQ_PRIORITY        6
+#define STM32_EXT_EXTI3_IRQ_PRIORITY        6
+#define STM32_EXT_EXTI4_IRQ_PRIORITY        6
+#define STM32_EXT_EXTI5_9_IRQ_PRIORITY      6
+#define STM32_EXT_EXTI10_15_IRQ_PRIORITY    6
+#define STM32_EXT_EXTI16_IRQ_PRIORITY       6
+#define STM32_EXT_EXTI17_IRQ_PRIORITY       6
+#define STM32_EXT_EXTI18_IRQ_PRIORITY       6
+#define STM32_EXT_EXTI19_IRQ_PRIORITY       6
+#define STM32_EXT_EXTI20_IRQ_PRIORITY       6
+#define STM32_EXT_EXTI21_22_29_IRQ_PRIORITY 6
+#define STM32_EXT_EXTI30_32_IRQ_PRIORITY    6
+#define STM32_EXT_EXTI33_IRQ_PRIORITY       6
+
+/*
+ * GPT driver system settings.
+ */
+#define STM32_GPT_USE_TIM1                  FALSE
+#define STM32_GPT_USE_TIM2                  FALSE
+#define STM32_GPT_USE_TIM3                  FALSE
+#define STM32_GPT_USE_TIM4                  FALSE
+#define STM32_GPT_USE_TIM6                  TRUE
+#define STM32_GPT_USE_TIM7                  TRUE
+#define STM32_GPT_USE_TIM8                  TRUE
+#define STM32_GPT_TIM1_IRQ_PRIORITY         7
+#define STM32_GPT_TIM2_IRQ_PRIORITY         7
+#define STM32_GPT_TIM3_IRQ_PRIORITY         7
+#define STM32_GPT_TIM4_IRQ_PRIORITY         7
+#define STM32_GPT_TIM6_IRQ_PRIORITY         7
+#define STM32_GPT_TIM7_IRQ_PRIORITY         7
+#define STM32_GPT_TIM8_IRQ_PRIORITY         7
+
+/*
+ * I2C driver system settings.
+ */
+#define STM32_I2C_USE_I2C1                  TRUE
+#define STM32_I2C_USE_I2C2                  FALSE
+#define STM32_I2C_BUSY_TIMEOUT              50
+#define STM32_I2C_I2C1_IRQ_PRIORITY         10
+#define STM32_I2C_I2C2_IRQ_PRIORITY         10
+#define STM32_I2C_USE_DMA                   TRUE
+#define STM32_I2C_I2C1_DMA_PRIORITY         1
+#define STM32_I2C_I2C2_DMA_PRIORITY         1
+#define STM32_I2C_DMA_ERROR_HOOK(i2cp)      osalSysHalt("DMA failure")
+
+/*
+ * ICU driver system settings.
+ */
+#define STM32_ICU_USE_TIM1                  FALSE
+#define STM32_ICU_USE_TIM2                  FALSE
+#define STM32_ICU_USE_TIM3                  FALSE
+#define STM32_ICU_USE_TIM4                  FALSE
+#define STM32_ICU_USE_TIM8                  FALSE
+#define STM32_ICU_TIM1_IRQ_PRIORITY         7
+#define STM32_ICU_TIM2_IRQ_PRIORITY         7
+#define STM32_ICU_TIM3_IRQ_PRIORITY         7
+#define STM32_ICU_TIM4_IRQ_PRIORITY         7
+#define STM32_ICU_TIM8_IRQ_PRIORITY         7
+
+/*
+ * PWM driver system settings.
+ */
+#define STM32_PWM_USE_ADVANCED              FALSE
+#define STM32_PWM_USE_TIM1                  FALSE
+#define STM32_PWM_USE_TIM2                  FALSE
+#define STM32_PWM_USE_TIM3                  FALSE
+#define STM32_PWM_USE_TIM4                  FALSE
+#define STM32_PWM_USE_TIM8                  FALSE
+#define STM32_PWM_TIM1_IRQ_PRIORITY         7
+#define STM32_PWM_TIM2_IRQ_PRIORITY         7
+#define STM32_PWM_TIM3_IRQ_PRIORITY         7
+#define STM32_PWM_TIM4_IRQ_PRIORITY         7
+#define STM32_PWM_TIM8_IRQ_PRIORITY         7
+
+/*
+ * SERIAL driver system settings.
+ */
+#define STM32_SERIAL_USE_USART1             FALSE
+#define STM32_SERIAL_USE_USART2             FALSE
+#define STM32_SERIAL_USE_USART3             FALSE
+#define STM32_SERIAL_USE_UART4              FALSE
+#define STM32_SERIAL_USE_UART5              FALSE
+#define STM32_SERIAL_USART1_PRIORITY        12
+#define STM32_SERIAL_USART2_PRIORITY        12
+#define STM32_SERIAL_USART3_PRIORITY        12
+#define STM32_SERIAL_UART4_PRIORITY         12
+#define STM32_SERIAL_UART5_PRIORITY         12
+
+/*
+ * SPI driver system settings.
+ */
+#define STM32_SPI_USE_SPI1                  FALSE
+#define STM32_SPI_USE_SPI2                  FALSE
+#define STM32_SPI_USE_SPI3                  FALSE
+#define STM32_SPI_SPI1_DMA_PRIORITY         1
+#define STM32_SPI_SPI2_DMA_PRIORITY         1
+#define STM32_SPI_SPI3_DMA_PRIORITY         1
+#define STM32_SPI_SPI1_IRQ_PRIORITY         10
+#define STM32_SPI_SPI2_IRQ_PRIORITY         10
+#define STM32_SPI_SPI3_IRQ_PRIORITY         10
+#define STM32_SPI_DMA_ERROR_HOOK(spip)      osalSysHalt("DMA failure")
+
+/*
+ * ST driver system settings.
+ */
+#define STM32_ST_IRQ_PRIORITY               8
+#define STM32_ST_USE_TIMER                  2
+
+/*
+ * UART driver system settings.
+ */
+#define STM32_UART_USE_USART1               FALSE
+#define STM32_UART_USE_USART2               FALSE
+#define STM32_UART_USE_USART3               FALSE
+#define STM32_UART_USART1_IRQ_PRIORITY      12
+#define STM32_UART_USART2_IRQ_PRIORITY      12
+#define STM32_UART_USART3_IRQ_PRIORITY      12
+#define STM32_UART_USART1_DMA_PRIORITY      0
+#define STM32_UART_USART2_DMA_PRIORITY      0
+#define STM32_UART_USART3_DMA_PRIORITY      0
+#define STM32_UART_DMA_ERROR_HOOK(uartp)    osalSysHalt("DMA failure")
+
+/*
+ * USB driver system settings.
+ */
+#define STM32_USB_USE_USB1                  TRUE
+#define STM32_USB_LOW_POWER_ON_SUSPEND      FALSE
+#define STM32_USB_USB1_HP_IRQ_PRIORITY      13
+#define STM32_USB_USB1_LP_IRQ_PRIORITY      14
+
+/*
+ * WDG driver system settings.
+ */
+#define STM32_WDG_USE_IWDG                  FALSE
+
+#endif /* MCUCONF_H */

keyboards/_qmk_handwire/readme.md

@@ -0,0 +1,14 @@
+# QMK Handwire
+
+An Arm-based handwire board.
+
+* Keyboard Maintainer: [Jack Humbert](https://github.com/jackhumbert)
+* Hardware Supported: QMK Handwire
+  * rev1 (1.0)
+* Hardware Availability: [qmk.fm](https://qmk.fm/)
+
+Make example for this keyboard (after setting up your build environment):
+
+    make _qmk_handwire:default
+
+See [build environment setup](https://docs.qmk.fm/build_environment_setup.html) then the [make instructions](https://docs.qmk.fm/make_instructions.html) for more information.

keyboards/_qmk_handwire/rules.mk

@@ -0,0 +1,56 @@
+# project specific files
+SRC =	matrix.c \
+	led.c
+
+## chip/board settings
+# - the next two should match the directories in
+#   <chibios>/os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES)
+MCU_FAMILY = STM32
+MCU_SERIES = STM32F3xx
+
+# Linker script to use
+# - it should exist either in <chibios>/os/common/ports/ARMCMx/compilers/GCC/ld/
+#   or <this_dir>/ld/
+MCU_LDSCRIPT = STM32F303xC
+
+# Startup code to use
+#  - it should exist in <chibios>/os/common/startup/ARMCMx/compilers/GCC/mk/
+MCU_STARTUP = stm32f3xx
+
+# Board: it should exist either in <chibios>/os/hal/boards/
+#  or <this_dir>/boards
+BOARD = GENERIC_STM32_F303XC
+
+# Cortex version
+MCU  = cortex-m4
+
+# ARM version, CORTEX-M0/M1 are 6, CORTEX-M3/M4/M7 are 7
+ARMV = 7
+
+USE_FPU = yes
+
+# Vector table for application
+# 0x00000000-0x00001000 area is occupied by bootlaoder.*/
+# The CORTEX_VTOR... is needed only for MCHCK/Infinity KB
+# OPT_DEFS = -DCORTEX_VTOR_INIT=0x08005000
+OPT_DEFS =
+
+# Options to pass to dfu-util when flashing
+DFU_ARGS = -d 0483:df11 -a 0 -s 0x08000000:leave
+
+# Build Options
+#   comment out to disable the options.
+#
+BACKLIGHT_ENABLE = no
+BOOTMAGIC_ENABLE = yes	# Virtual DIP switch configuration
+## (Note that for BOOTMAGIC on Teensy LC you have to use a custom .ld script.)
+MOUSEKEY_ENABLE = yes	# Mouse keys
+EXTRAKEY_ENABLE = yes	# Audio control and System control
+CONSOLE_ENABLE = yes	# Console for debug
+COMMAND_ENABLE = yes    # Commands for debug and configuration
+#SLEEP_LED_ENABLE = yes  # Breathing sleep LED during USB suspend
+NKRO_ENABLE = yes	    # USB Nkey Rollover
+CUSTOM_MATRIX = yes # Custom matrix file
+AUDIO_ENABLE = yes
+# SERIAL_LINK_ENABLE = yes
+I2C_SLAVE_ENABLE = yes

keyboards/chimera_ergo/chimera_ergo.c

@@ -0,0 +1,31 @@
+#include "chimera_ergo.h"
+
+void uart_init(void) {
+	SERIAL_UART_INIT();
+}
+
+void led_init(void) {
+	DDRD  |= (1<<1);
+	PORTD |= (1<<1);
+	DDRF  |= (1<<4) | (1<<5);
+	PORTF |= (1<<4) | (1<<5);
+}
+
+
+void matrix_init_kb(void) {
+	// put your keyboard start-up code here
+	// runs once when the firmware starts up
+	matrix_init_user();
+	uart_init();
+	led_init();
+}
+
+void matrix_scan_kb(void) {
+	// put your looping keyboard code here
+	// runs every cycle (a lot)
+	matrix_scan_user();
+}
+
+void led_set_kb(uint8_t usb_led) {
+
+}

keyboards/chimera_ergo/chimera_ergo.h

@@ -0,0 +1,82 @@
+#ifndef CHIMERA_ERGO_H
+#define CHIMERA_ERGO_H
+
+#include "quantum.h"
+#include "matrix.h"
+#include "backlight.h"
+#include <stddef.h>
+
+#define red_led_off   PORTF |= (1<<5)
+#define red_led_on    PORTF &= ~(1<<5)
+#define blu_led_off   PORTF |= (1<<4)
+#define blu_led_on    PORTF &= ~(1<<4)
+#define grn_led_off   PORTD |= (1<<1)
+#define grn_led_on    PORTD &= ~(1<<1)
+
+#define set_led_off     red_led_off; grn_led_off; blu_led_off
+#define set_led_red     red_led_on;  grn_led_off; blu_led_off
+#define set_led_blue    red_led_off; grn_led_off; blu_led_on
+#define set_led_green   red_led_off; grn_led_on;  blu_led_off
+#define set_led_yellow  red_led_on;  grn_led_on;  blu_led_off
+#define set_led_magenta red_led_on;  grn_led_off; blu_led_on
+#define set_led_cyan    red_led_off; grn_led_on;  blu_led_on
+#define set_led_white   red_led_on;  grn_led_on;  blu_led_on
+
+/*
+#define LED_B 5
+#define LED_R 6
+#define LED_G 7
+
+#define all_leds_off PORTF &= ~(1<<LED_B) & ~(1<<LED_R) & ~(1<<LED_G)
+
+#define red_led_on   PORTF |= (1<<LED_R)
+#define red_led_off  PORTF &= ~(1<<LED_R)
+#define grn_led_on   PORTF |= (1<<LED_G)
+#define grn_led_off  PORTF &= ~(1<<LED_G)
+#define blu_led_on   PORTF |= (1<<LED_B)
+#define blu_led_off  PORTF &= ~(1<<LED_B)
+
+#define set_led_off     PORTF &= ~(1<<LED_B) & ~(1<<LED_R) & ~(1<<LED_G)
+#define set_led_red     PORTF = PORTF & ~(1<<LED_B) & ~(1<<LED_G) | (1<<LED_R)
+#define set_led_blue    PORTF = PORTF & ~(1<<LED_G) & ~(1<<LED_R) | (1<<LED_B)
+#define set_led_green   PORTF = PORTF & ~(1<<LED_B) & ~(1<<LED_R) | (1<<LED_G)
+#define set_led_yellow  PORTF = PORTF & ~(1<<LED_B) | (1<<LED_R) | (1<<LED_G)
+#define set_led_magenta PORTF = PORTF & ~(1<<LED_G) | (1<<LED_R) | (1<<LED_B)
+#define set_led_cyan    PORTF = PORTF & ~(1<<LED_R) | (1<<LED_B) | (1<<LED_G)
+#define set_led_white   PORTF |= (1<<LED_B) | (1<<LED_R) | (1<<LED_G)
+*/
+
+// This a shortcut to help you visually see your layout.
+// The first section contains all of the arguements
+// The second converts the arguments into a two-dimensional array
+#define KC_KEYMAP( \
+  k00, k01, k02, k03, k04, k05,      k06, k07, k08, k09, k10, k11, \
+  k12, k13, k14, k15, k16, k17,      k18, k19, k20, k21, k22, k23, \
+  k24, k25, k26, k27, k28, k29,      k30, k31, k32, k33, k34, k35, \
+  k36, k37, k38, k39, k40, k41,      k42, k43, k44, k45, k46, k47, \
+                      k48, k49,      k50, k51 \
+) \
+{ \
+	{ KC_NO,    KC_NO,    KC_##k26, KC_##k15, KC_##k28, KC_##k01,      KC_##k42, KC_##k31, KC_##k20, KC_##k33, KC_NO,    KC_NO     }, \
+	{ KC_##k00, KC_NO,    KC_##k14, KC_##k27, KC_##k16, KC_##k36,      KC_##k47, KC_##k19, KC_##k32, KC_##k21, KC_NO,    KC_##k11  }, \
+	{ KC_##k12, KC_##k25, KC_##k02, KC_##k39, KC_##k17, KC_##k49,      KC_##k50, KC_##k18, KC_##k44, KC_##k09, KC_##k34, KC_##k23  }, \
+	{ KC_##k24, KC_##k13, KC_##k38, KC_##k04, KC_##k05, KC_##k48,      KC_##k51, KC_##k06, KC_##k07, KC_##k45, KC_##k22, KC_##k35  },  \
+	{ KC_##k29, KC_##k41, KC_##k03, KC_##k40, KC_##k37, KC_NO,         KC_##k30, KC_##k43, KC_##k08, KC_##k10, KC_##k46, KC_NO     }, \
+}
+
+#define KEYMAP( \
+  k00, k01, k02, k03, k04, k05,      k06, k07, k08, k09, k10, k11, \
+  k12, k13, k14, k15, k16, k17,      k18, k19, k20, k21, k22, k23, \
+  k24, k25, k26, k27, k28, k29,      k30, k31, k32, k33, k34, k35, \
+  k36, k37, k38, k39, k40, k41,      k42, k43, k44, k45, k46, k47, \
+                      k48, k49,      k50, k51 \
+) \
+{ \
+	{ KC_NO, KC_NO, k26, k15, k28, k01,      k42, k31, k20, k33, KC_NO, KC_NO  }, \
+	{ k00,   KC_NO, k14, k27, k16, k36,      k47, k19, k32, k21, KC_NO, k11    }, \
+	{ k12,   k25,   k02, k39, k17, k49,      k50, k18, k44, k09, k34,   k23    }, \
+	{ k24,   k13,   k38, k04, k05, k48,      k51, k06, k07, k45, k22,   k35    },  \
+	{ k29,   k41,   k03, k40, k37, KC_NO,    k30, k43, k08, k10, k46,   KC_NO  }, \
+}
+
+#endif

keyboards/chimera_ergo/config.h

@@ -0,0 +1,87 @@
+/*
+Copyright 2012 Jun Wako <wakojun@gmail.com>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#ifndef CONFIG_H
+#define CONFIG_H
+
+#include "config_common.h"
+
+/* USB Device descriptor parameter */
+
+#define VENDOR_ID       0xFEED
+#define PRODUCT_ID      0x6060
+#define DEVICE_VER      0x0001
+#define MANUFACTURER    unknown
+#define PRODUCT         Chimera Ergo
+#define DESCRIPTION     q.m.k. keyboard firmware for Chimera Ergo
+
+/* key matrix size */
+#define MATRIX_ROWS 6
+#define MATRIX_COLS 12
+
+/* define if matrix has ghost */
+//#define MATRIX_HAS_GHOST
+
+/* number of backlight levels */
+//#define BACKLIGHT_LEVELS 3
+
+#define ONESHOT_TIMEOUT 500
+
+
+/* key combination for command */
+#define IS_COMMAND() ( \
+    keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
+)
+
+/*
+ * Feature disable options
+ *  These options are also useful to firmware size reduction.
+ */
+
+#define PREVENT_STUCK_MODIFIERS
+
+/* disable debug print */
+//#define NO_DEBUG
+
+/* disable print */
+//#define NO_PRINT
+
+/* disable action features */
+//#define NO_ACTION_LAYER
+//#define NO_ACTION_TAPPING
+//#define NO_ACTION_ONESHOT
+//#define NO_ACTION_MACRO
+//#define NO_ACTION_FUNCTION
+
+//UART settings for communication with the RF microcontroller
+#define SERIAL_UART_BAUD 1000000
+#define SERIAL_UART_DATA UDR1
+#define SERIAL_UART_UBRR (F_CPU / (16UL * SERIAL_UART_BAUD) - 1)
+#define SERIAL_UART_TXD_READY (UCSR1A & _BV(UDRE1))
+#define SERIAL_UART_RXD_PRESENT (UCSR1A & _BV(RXC1))
+#define SERIAL_UART_INIT() do { \
+    	/* baud rate */ \
+    	UBRR1L = SERIAL_UART_UBRR; \
+    	/* baud rate */ \
+    	UBRR1H = SERIAL_UART_UBRR >> 8; \
+    	/* enable TX and RX */ \
+    	UCSR1B = _BV(TXEN1) | _BV(RXEN1); \
+    	/* 8-bit data */ \
+    	UCSR1C = _BV(UCSZ11) | _BV(UCSZ10); \
+  	} while(0)
+
+#endif

keyboards/chimera_ergo/keymaps/default/keymap.c

@@ -0,0 +1,206 @@
+// this is the style you want to emulate.
+// This is the canonical layout file for the Quantum project. If you want to add another keyboard,
+
+#include "chimera_ergo.h"
+
+// Each layer gets a name for readability, which is then used in the keymap matrix below.
+// The underscores don't mean anything - you can have a layer called STUFF or any other name.
+// Layer names don't all need to be of the same length, obviously, and you can also skip them
+// entirely and just use numbers.
+enum chimera_ergo_layers
+{
+	_QWERTY,
+	_CAPS,
+	_NUMPAD,
+	_SYMBOLS,
+	_MACROS,
+	_NAV
+};
+
+#define KC_NMPD TG(_NUMPAD)
+#define KC_SYMB TG(_SYMBOLS)
+#define KC_SPFN LT(_NAV,KC_EQL)
+#define KC_SCTL MT(MOD_LCTL, KC_LBRC)
+#define KC_SCTR MT(MOD_LCTL, KC_RBRC)
+#define KC_SPLT MT(MOD_LALT, KC_MINS)
+#define KC_SPRT MT(MOD_LALT, KC_1)
+#define KC_GBRC MT(MOD_RGUI, KC_RBRC)
+#define KC_GQOT MT(MOD_LGUI, KC_QUOT)
+#define KC_MESC LT(_MACROS, KC_ESC)
+#define KC_INCL M(0)
+#define KC_PULL M(1)
+#define KC_PUSH M(2)
+#define KC_SCAP M(3)
+#define KC_SCOF M(4)
+#define KC_CAD LALT(LCTL(KC_DEL))
+
+#define LONGPRESS_DELAY 150
+//#define LAYER_TOGGLE_DELAY 300
+
+// Fillers to make layering more clear
+#define _______ KC_TRNS
+#define XXXXXXX KC_NO
+#define KC_ KC_TRNS 
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+
+  [_QWERTY] = KC_KEYMAP(
+  //,----+----+----+----+----+----.     ,----+----+----+----+----+----.
+     LBRC, 1  ,SCTL,SPLT,SPFN, 5  ,       6  ,GBRC,SPRT,SCTR, 0  ,RBRC,
+  //|----+----+----+----+----+----|     |----+----+----+----+----+----|
+     MESC, Q  , W  , E  , R  , T  ,       Y  , U  , I  , O  , P  ,QUOT,
+  //|----+----+----+----+----+----|     |----+----+----+----+----+----|
+     TAB , A  , S  , D  , F  , G  ,       H  , J  , K  , L  ,SCLN,ENT ,
+  //|----+----+----+----+----+----|     |----+----+----+----+----+----|
+     LSPO, Z  , X  , C  , V  , B  ,       N  , M  ,COMM,DOT ,SLSH,RSPC,
+  //|----+----+----+----+----+----|     |----+----+----+----+----+----|
+                         NMPD,BSPC,      SPC ,SYMB
+  // \------------------+----+----/      \---+----+----+--------------/
+  ),
+
+  [_CAPS] = KC_KEYMAP(
+  //,----+----+----+----+----+----.     ,----+----+----+----+----+----.
+         ,UNDS,    ,    ,    ,    ,          ,    ,    ,    ,    ,    ,
+  //|----+----+----+----+----+----|     |----+----+----+----+----+----|
+         ,    ,    ,    ,    ,    ,          ,    ,    ,    ,    ,    ,
+  //|----+----+----+----+----+----|     |----+----+----+----+----+----|
+         ,    ,    ,    ,    ,    ,          ,    ,    ,    ,COLN,    ,
+  //|----+----+----+----+----+----|     |----+----+----+----+----+----|
+     SCOF,    ,    ,    ,    ,    ,          ,    ,    ,    ,    ,SCOF,
+  //|----+----+----+----+----+----|     |----+----+----+----+----+----|
+                             ,    ,          ,
+  // \------------------+----+----/      \---+----+----+--------------/
+  ),
+
+  [_NUMPAD] = KC_KEYMAP(
+  //,----+----+----+----+----+----.     ,----+----+----+----+----+----.
+         ,    ,    ,    ,    ,    ,          ,    ,    ,    ,MINS,    ,
+  //|----+----+----+----+----+----|     |----+----+----+----+----+----|
+         ,    ,COLN,    ,    ,    ,          , 7  , 8  , 9  ,ASTR,    ,
+  //|----+----+----+----+----+----|     |----+----+----+----+----+----|
+         ,    ,DOT ,    ,    ,    ,          , 4  , 5  , 6  ,PLUS,    ,
+  //|----+----+----+----+----+----|     |----+----+----+----+----+----|
+         ,    ,    ,    ,    ,    ,          , 1  , 2  , 3  ,SLSH,    ,
+  //|----+----+----+----+----+----|     |----+----+----+----+----+----|
+                             ,    ,          , 0
+  // \------------------+----+----/      \---+----+----+--------------/
+  ),
+
+  [_SYMBOLS] = KC_KEYMAP(
+  //,----+----+----+----+----+----.     ,----+----+----+----+----+----.
+         ,    ,    ,    ,    ,    ,          ,    ,    ,    ,    ,    ,
+  //|----+----+----+----+----+----|     |----+----+----+----+----+----|
+         ,EXLM, AT ,HASH,DLR ,PERC,      CIRC,AMPR,ASTR,LPRN,RPRN,BSLS,
+  //|----+----+----+----+----+----|     |----+----+----+----+----+----|
+      F1 , F2 , F3 , F4 , F5 , F6 ,      TILD,EQL ,UNDS,LCBR,RCBR,    ,
+  //|----+----+----+----+----+----|     |----+----+----+----+----+----|
+      F7 , F8 , F9 ,F10 ,F11 ,F12 ,      GRV ,PLUS,MINS,LBRC,RBRC,    ,
+  //|----+----+----+----+----+----|     |----+----+----+----+----+----|
+                         PIPE,    ,          ,
+  // \------------------+----+----/      \---+----+----+--------------/
+  ),
+
+  [_MACROS] = KC_KEYMAP(  
+  //,----+----+----+----+----+----.     ,----+----+----+----+----+----.
+         ,    ,    ,    ,    ,    ,          ,    ,    ,    ,    ,    ,
+  //|----+----+----+----+----+----|     |----+----+----+----+----+----|
+         ,    ,    ,    ,    ,    ,          ,    ,INCL,    ,    ,    ,
+  //|----+----+----+----+----+----|     |----+----+----+----+----+----|
+         ,    ,    ,CAD ,    ,    ,          ,    ,    ,    ,    ,    ,
+  //|----+----+----+----+----+----|     |----+----+----+----+----+----|
+     SCAP,    ,    ,    ,    ,    ,          ,    ,PULL,PUSH,    ,    ,
+  //|----+----+----+----+----+----|     |----+----+----+----+----+----|
+                             ,    ,          ,    
+  // \------------------+----+----/      \---+----+----+--------------/
+  ),
+
+  [_NAV] = KC_KEYMAP(  
+  //,----+----+----+----+----+----.     ,----+----+----+----+----+----.
+         ,    ,    ,    ,    ,    ,          ,    ,    ,    ,    ,    ,
+  //|----+----+----+----+----+----|     |----+----+----+----+----+----|
+         ,    ,    ,    ,    ,    ,          ,PGUP, UP ,PGDN,PSCR,    ,
+  //|----+----+----+----+----+----|     |----+----+----+----+----+----|
+         ,    ,    ,    ,    ,    ,          ,LEFT,DOWN,RGHT,    ,    ,
+  //|----+----+----+----+----+----|     |----+----+----+----+----+----|
+         ,    ,    ,    ,    ,    ,          ,    ,    ,    ,    ,    ,
+  //|----+----+----+----+----+----|     |----+----+----+----+----+----|
+                             ,DEL ,          ,    
+  // \------------------+----+----/      \---+----+----+--------------/
+  ),
+
+
+};
+
+
+const uint16_t PROGMEM fn_actions[] = {
+
+};
+
+const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt)
+{
+  switch(id) {
+    /* include some kind of library or header */
+    case 0:
+      if (record->event.pressed) {
+        SEND_STRING("#include <>");
+        return MACRO( T(LEFT), END);
+      }
+      break;
+    case 1:
+      if (record->event.pressed) {
+        SEND_STRING("git pull");
+        return MACRO( T(ENT), END );
+      }
+      break;
+    case 2:
+      if (record->event.pressed){
+        SEND_STRING("git push");
+        return MACRO( T(ENT), END );
+      }
+      break;
+    case 3:
+      if (record->event.pressed){
+        layer_on(_CAPS);
+        register_code(KC_CAPSLOCK);
+        unregister_code(KC_CAPSLOCK);
+      }
+      break;
+    case 4:
+      if (record->event.pressed){
+        layer_off(_CAPS);
+        register_code(KC_CAPSLOCK);
+        unregister_code(KC_CAPSLOCK);
+      }
+      break;
+  }
+  return MACRO_NONE;
+};
+ 
+
+void matrix_scan_user(void) {
+    uint8_t layer = biton32(layer_state);
+    
+    switch (layer) {
+    	case _QWERTY:
+    	    set_led_green;
+    	    break;
+        case _CAPS:
+	    set_led_white;
+	    break;
+        case _NUMPAD:
+            set_led_blue;
+            break;
+        case _SYMBOLS:
+            set_led_red;
+            break;
+        case _NAV:
+	    set_led_magenta;
+	    break;
+        case _MACROS:
+	    set_led_cyan;
+	    break;
+       default:
+            set_led_green;
+            break;
+    }
+};

keyboards/chimera_ergo/matrix.c

@@ -0,0 +1,164 @@
+/*
+Copyright 2012 Jun Wako
+Copyright 2014 Jack Humbert
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+#include <stdint.h>
+#include <stdbool.h>
+#if defined(__AVR__)
+#include <avr/io.h>
+#endif
+#include "wait.h"
+#include "print.h"
+#include "debug.h"
+#include "util.h"
+#include "matrix.h"
+#include "timer.h"
+
+#if (MATRIX_COLS <= 8)
+#    define print_matrix_header()  print("\nr/c 01234567\n")
+#    define print_matrix_row(row)  print_bin_reverse8(matrix_get_row(row))
+#    define matrix_bitpop(i)       bitpop(matrix[i])
+#    define ROW_SHIFTER ((uint8_t)1)
+#elif (MATRIX_COLS <= 16)
+#    define print_matrix_header()  print("\nr/c 0123456789ABCDEF\n")
+#    define print_matrix_row(row)  print_bin_reverse16(matrix_get_row(row))
+#    define matrix_bitpop(i)       bitpop16(matrix[i])
+#    define ROW_SHIFTER ((uint16_t)1)
+#elif (MATRIX_COLS <= 32)
+#    define print_matrix_header()  print("\nr/c 0123456789ABCDEF0123456789ABCDEF\n")
+#    define print_matrix_row(row)  print_bin_reverse32(matrix_get_row(row))
+#    define matrix_bitpop(i)       bitpop32(matrix[i])
+#    define ROW_SHIFTER  ((uint32_t)1)
+#endif
+
+/* matrix state(1:on, 0:off) */
+static matrix_row_t matrix[MATRIX_ROWS];
+
+__attribute__ ((weak))
+void matrix_init_quantum(void) {
+    matrix_init_kb();
+}
+
+__attribute__ ((weak))
+void matrix_scan_quantum(void) {
+    matrix_scan_kb();
+}
+
+__attribute__ ((weak))
+void matrix_init_kb(void) {
+    matrix_init_user();
+}
+
+__attribute__ ((weak))
+void matrix_scan_kb(void) {
+    matrix_scan_user();
+}
+
+__attribute__ ((weak))
+void matrix_init_user(void) {
+}
+
+__attribute__ ((weak))
+void matrix_scan_user(void) {
+}
+
+inline
+uint8_t matrix_rows(void) {
+    return MATRIX_ROWS;
+}
+
+inline
+uint8_t matrix_cols(void) {
+    return MATRIX_COLS;
+}
+
+void matrix_init(void) {
+
+    matrix_init_quantum();
+}
+
+uint8_t matrix_scan(void)
+{
+    SERIAL_UART_INIT();
+
+    uint32_t timeout = 0;
+
+    //the s character requests the RF slave to send the matrix
+    SERIAL_UART_DATA = 's';
+
+    //trust the external keystates entirely, erase the last data
+    uint8_t uart_data[14] = {0};
+
+    //there are 10 bytes corresponding to 10 columns, and an end byte
+    for (uint8_t i = 0; i < 14; i++) {
+        //wait for the serial data, timeout if it's been too long
+        //this only happened in testing with a loose wire, but does no
+        //harm to leave it in here
+        while(!SERIAL_UART_RXD_PRESENT){
+            timeout++;
+            if (timeout > 10000){
+                break;
+            }
+        } 
+        uart_data[i] = SERIAL_UART_DATA;
+    }
+
+    //check for the end packet, the key state bytes use the LSBs, so 0xE0
+    //will only show up here if the correct bytes were recieved
+    if (uart_data[10] == 0xE0)
+    {
+        //shifting and transferring the keystates to the QMK matrix variable
+        for (uint8_t i = 0; i < MATRIX_ROWS; i++) {
+            matrix[i] = (uint16_t) uart_data[i*2] | (uint16_t) uart_data[i*2+1] << 6;
+        }
+    }
+
+
+    matrix_scan_quantum();
+    return 1;
+}
+
+inline
+bool matrix_is_on(uint8_t row, uint8_t col)
+{
+    return (matrix[row] & ((matrix_row_t)1<col));
+}
+
+inline
+matrix_row_t matrix_get_row(uint8_t row)
+{
+    return matrix[row];
+}
+
+void matrix_print(void)
+{
+    print_matrix_header();
+
+    for (uint8_t row = 0; row < MATRIX_ROWS; row++) {
+        phex(row); print(": ");
+        print_matrix_row(row);
+        print("\n");
+    }
+}
+
+uint8_t matrix_key_count(void)
+{
+    uint8_t count = 0;
+    for (uint8_t i = 0; i < MATRIX_ROWS; i++) {
+        count += matrix_bitpop(i);
+    }
+    return count;
+}

keyboards/chimera_ergo/readme.md

@@ -0,0 +1,19 @@
+# Chimera Ergo
+
+![Chimera Ergo](https://imgur.com/AA6ycMQ.jpg)
+
+A split wireless 40% ergonomic keyboard 
+
+Keyboard Maintainer: [William Wilson](https://github.com/GlenPickle)  
+
+
+Hardware Supported: Chimera Ergo PCB, WaveShare core nRF51822
+
+Hardware Availability: [Gerbers](https://github.com/GlenPickle/Chimera/tree/master/ergo/gerbers)
+
+Make example for this keyboard (after setting up your build environment):
+
+    make chimera_ergo:default
+
+See [build environment setup](https://docs.qmk.fm/build_environment_setup.html) then the [make instructions](https://docs.qmk.fm/make_instructions.html) for more information.
+

keyboards/chimera_ergo/rules.mk

@@ -0,0 +1,82 @@
+
+OPT_DEFS += -DCHIMERA_ERGO_PROMICRO
+CHIMERA_ERGO_UPLOAD_COMMAND = while [ ! -r $(USB) ]; do sleep 1; done; \
+                         avrdude -p $(MCU) -c avr109 -U flash:w:$(TARGET).hex -P $(USB)
+
+# # project specific files
+SRC = matrix.c
+
+
+# MCU name
+#MCU = at90usb1287
+MCU = atmega32u4
+
+# Processor frequency.
+#     This will define a symbol, F_CPU, in all source code files equal to the
+#     processor frequency in Hz. You can then use this symbol in your source code to
+#     calculate timings. Do NOT tack on a 'UL' at the end, this will be done
+#     automatically to create a 32-bit value in your source code.
+#
+#     This will be an integer division of F_USB below, as it is sourced by
+#     F_USB after it has run through any CPU prescalers. Note that this value
+#     does not *change* the processor frequency - it should merely be updated to
+#     reflect the processor speed set externally so that the code can use accurate
+#     software delays.
+F_CPU = 16000000
+
+
+#
+# LUFA specific
+#
+# Target architecture (see library "Board Types" documentation).
+ARCH = AVR8
+
+# Input clock frequency.
+#     This will define a symbol, F_USB, in all source code files equal to the
+#     input clock frequency (before any prescaling is performed) in Hz. This value may
+#     differ from F_CPU if prescaling is used on the latter, and is required as the
+#     raw input clock is fed directly to the PLL sections of the AVR for high speed
+#     clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
+#     at the end, this will be done automatically to create a 32-bit value in your
+#     source code.
+#
+#     If no clock division is performed on the input clock inside the AVR (via the
+#     CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
+F_USB = $(F_CPU)
+
+# Bootloader
+#     This definition is optional, and if your keyboard supports multiple bootloaders of
+#     different sizes, comment this out, and the correct address will be loaded 
+#     automatically (+60). See bootloader.mk for all options.
+BOOTLOADER = caterina
+
+# Interrupt driven control endpoint task(+60)
+OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
+
+# Boot Section Size in *bytes*
+#   Teensy halfKay   512
+#   Teensy++ halfKay 1024
+#   Atmel DFU loader 4096
+#   LUFA bootloader  4096
+#   USBaspLoader     2048
+OPT_DEFS += -DBOOTLOADER_SIZE=4096
+
+
+# Build Options
+#   comment out to disable the options.
+#
+#BOOTMAGIC_ENABLE = yes	# Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE = yes	# Mouse keys(+4700)
+EXTRAKEY_ENABLE = yes	# Audio control and System control(+450)
+CONSOLE_ENABLE = yes	# Console for debug(+400)
+COMMAND_ENABLE = yes   # Commands for debug and configuration
+CUSTOM_MATRIX = yes    # Remote matrix from the wireless bridge
+# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
+# SLEEP_LED_ENABLE = yes  # Breathing sleep LED during USB suspend
+NKRO_ENABLE = yes		# USB Nkey Rollover - not yet supported in LUFA
+# BACKLIGHT_ENABLE = yes  # Enable keyboard backlight functionality
+# MIDI_ENABLE = YES 		# MIDI controls
+UNICODE_ENABLE = YES 		# Unicode
+# BLUETOOTH_ENABLE = yes # Enable Bluetooth with the Adafruit EZ-Key HID
+
+USB = /dev/ttyACM0

keyboards/chimera_ls/chimera_ls.c

@@ -0,0 +1,31 @@
+#include "chimera_ls.h"
+
+void uart_init(void) {
+	SERIAL_UART_INIT();
+}
+
+void led_init(void) {
+	DDRD  |= (1<<1);
+	PORTD |= (1<<1);
+	DDRF  |= (1<<4) | (1<<5);
+	PORTF |= (1<<4) | (1<<5);
+}
+
+
+void matrix_init_kb(void) {
+	// put your keyboard start-up code here
+	// runs once when the firmware starts up
+	matrix_init_user();
+	uart_init();
+	led_init();
+}
+
+void matrix_scan_kb(void) {
+	// put your looping keyboard code here
+	// runs every cycle (a lot)
+	matrix_scan_user();
+}
+
+void led_set_kb(uint8_t usb_led) {
+
+}

keyboards/chimera_ls/chimera_ls.h

@@ -0,0 +1,82 @@
+#ifndef CHIMERA_LETS_SPLIT_H
+#define CHIMERA_LETS_SPLIT_H
+
+#include "quantum.h"
+#include "matrix.h"
+#include "backlight.h"
+#include <stddef.h>
+
+#define red_led_off   PORTF |= (1<<5)
+#define red_led_on    PORTF &= ~(1<<5)
+#define blu_led_off   PORTF |= (1<<4)
+#define blu_led_on    PORTF &= ~(1<<4)
+#define grn_led_off   PORTD |= (1<<1)
+#define grn_led_on    PORTD &= ~(1<<1)
+
+#define set_led_off     red_led_off; grn_led_off; blu_led_off
+#define set_led_red     red_led_on;  grn_led_off; blu_led_off
+#define set_led_blue    red_led_off; grn_led_off; blu_led_on
+#define set_led_green   red_led_off; grn_led_on;  blu_led_off
+#define set_led_yellow  red_led_on;  grn_led_on;  blu_led_off
+#define set_led_magenta red_led_on;  grn_led_off; blu_led_on
+#define set_led_cyan    red_led_off; grn_led_on;  blu_led_on
+#define set_led_white   red_led_on;  grn_led_on;  blu_led_on
+
+/*
+#define LED_B 5
+#define LED_R 6
+#define LED_G 7
+
+#define all_leds_off PORTF &= ~(1<<LED_B) & ~(1<<LED_R) & ~(1<<LED_G)
+
+#define red_led_on   PORTF |= (1<<LED_R)
+#define red_led_off  PORTF &= ~(1<<LED_R)
+#define grn_led_on   PORTF |= (1<<LED_G)
+#define grn_led_off  PORTF &= ~(1<<LED_G)
+#define blu_led_on   PORTF |= (1<<LED_B)
+#define blu_led_off  PORTF &= ~(1<<LED_B)
+
+#define set_led_off     PORTF &= ~(1<<LED_B) & ~(1<<LED_R) & ~(1<<LED_G)
+#define set_led_red     PORTF = PORTF & ~(1<<LED_B) & ~(1<<LED_G) | (1<<LED_R)
+#define set_led_blue    PORTF = PORTF & ~(1<<LED_G) & ~(1<<LED_R) | (1<<LED_B)
+#define set_led_green   PORTF = PORTF & ~(1<<LED_B) & ~(1<<LED_R) | (1<<LED_G)
+#define set_led_yellow  PORTF = PORTF & ~(1<<LED_B) | (1<<LED_R) | (1<<LED_G)
+#define set_led_magenta PORTF = PORTF & ~(1<<LED_G) | (1<<LED_R) | (1<<LED_B)
+#define set_led_cyan    PORTF = PORTF & ~(1<<LED_R) | (1<<LED_B) | (1<<LED_G)
+#define set_led_white   PORTF |= (1<<LED_B) | (1<<LED_R) | (1<<LED_G)
+*/
+
+// This a shortcut to help you visually see your layout.
+// The first section contains all of the arguements
+// The second converts the arguments into a two-dimensional array
+
+#define KC_KEYMAP( \
+  k00, k01, k02, k03, k04, k05,           k06, k07, k08, k09, k10, k11, \
+  k12, k13, k14, k15, k16, k17,           k18, k19, k20, k21, k22, k23, \
+  k24, k25, k26, k27, k28, k29,           k30, k31, k32, k33, k34, k35, \
+  k36, k37, k38, k39, k40, k41,           k42, k43, k44, k45, k46, k47  \
+) \
+{ \
+	{ KC_##k43, KC_##k45, KC_##k34, KC_##k11, KC_##k23, KC_##k40, KC_##k38, KC_##k25, KC_##k00, KC_##k12 }, \
+	{ KC_##k31, KC_##k44, KC_##k46, KC_##k35, KC_##k22, KC_##k28, KC_##k39, KC_##k37, KC_##k24, KC_##k13 }, \
+	{ KC_##k30, KC_##k32, KC_##k33, KC_##k47, KC_##k09, KC_##k29, KC_##k27, KC_##k26, KC_##k36, KC_##k02 }, \
+	{ KC_##k19, KC_##k20, KC_##k21, KC_##k42, KC_##k18, KC_##k16, KC_##k15, KC_##k14, KC_##k41, KC_##k17 },  \
+	{ KC_##k06, KC_##k07, KC_##k08, KC_##k10, KC_NO,    KC_##k05, KC_##k04, KC_##k03, KC_##k01, KC_NO    }, \
+}
+
+#define KEYMAP( \
+  k00, k01, k02, k03, k04, k05,           k06, k07, k08, k09, k10, k11, \
+  k12, k13, k14, k15, k16, k17,           k18, k19, k20, k21, k22, k23, \
+  k24, k25, k26, k27, k28, k29,           k30, k31, k32, k33, k34, k35, \
+  k36, k37, k38, k39, k40, k41,           k42, k43, k44, k45, k46, k47  \
+) \
+{ \
+	{ k43, k45, k34, k11, k23, k40, k38, k25, k00, k12 }, \
+	{ k31, k44, k46, k35, k22, k28, k39, k37, k24, k13 }, \
+	{ k30, k32, k33, k47, k09, k29, k27, k26, k36, k02 }, \
+	{ k19, k20, k21, k42, k18, k16, k15, k14, k41, k17 },  \
+	{ k06, k07, k08, k10, KC_NO,    k05, k04, k03, k01, KC_NO    }, \
+}
+
+
+#endif

keyboards/chimera_ls/config.h

@@ -0,0 +1,87 @@
+/*
+Copyright 2012 Jun Wako <wakojun@gmail.com>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#ifndef CONFIG_H
+#define CONFIG_H
+
+#include "config_common.h"
+
+/* USB Device descriptor parameter */
+
+#define VENDOR_ID       0xFEED
+#define PRODUCT_ID      0x6060
+#define DEVICE_VER      0x0001
+#define MANUFACTURER    unknown
+#define PRODUCT         Chimera Lets Split
+#define DESCRIPTION     q.m.k. keyboard firmware for Chimera Lets Split
+
+/* key matrix size */
+#define MATRIX_ROWS 5
+#define MATRIX_COLS 12
+
+/* define if matrix has ghost */
+//#define MATRIX_HAS_GHOST
+
+/* number of backlight levels */
+//#define BACKLIGHT_LEVELS 3
+
+#define ONESHOT_TIMEOUT 500
+
+
+/* key combination for command */
+#define IS_COMMAND() ( \
+    keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
+)
+
+/*
+ * Feature disable options
+ *  These options are also useful to firmware size reduction.
+ */
+
+#define PREVENT_STUCK_MODIFIERS
+
+/* disable debug print */
+//#define NO_DEBUG
+
+/* disable print */
+//#define NO_PRINT
+
+/* disable action features */
+//#define NO_ACTION_LAYER
+//#define NO_ACTION_TAPPING
+//#define NO_ACTION_ONESHOT
+//#define NO_ACTION_MACRO
+//#define NO_ACTION_FUNCTION
+
+//UART settings for communication with the RF microcontroller
+#define SERIAL_UART_BAUD 1000000
+#define SERIAL_UART_DATA UDR1
+#define SERIAL_UART_UBRR (F_CPU / (16UL * SERIAL_UART_BAUD) - 1)
+#define SERIAL_UART_TXD_READY (UCSR1A & _BV(UDRE1))
+#define SERIAL_UART_RXD_PRESENT (UCSR1A & _BV(RXC1))
+#define SERIAL_UART_INIT() do { \
+    	/* baud rate */ \
+    	UBRR1L = SERIAL_UART_UBRR; \
+    	/* baud rate */ \
+    	UBRR1H = SERIAL_UART_UBRR >> 8; \
+    	/* enable TX and RX */ \
+    	UCSR1B = _BV(TXEN1) | _BV(RXEN1); \
+    	/* 8-bit data */ \
+    	UCSR1C = _BV(UCSZ11) | _BV(UCSZ10); \
+  	} while(0)
+
+#endif

keyboards/chimera_ls/keymaps/default/keymap.c

@@ -0,0 +1,191 @@
+// this is the style you want to emulate.
+// This is the canonical layout file for the Quantum project. If you want to add another keyboard,
+
+#include "chimera_ls.h"
+
+// Each layer gets a name for readability, which is then used in the keymap matrix below.
+// The underscores don't mean anything - you can have a layer called STUFF or any other name.
+// Layer names don't all need to be of the same length, obviously, and you can also skip them
+// entirely and just use numbers.
+enum chimera_lets_split_layers
+{
+	_QWERTY,
+	_CAPS,
+	_NUMPAD,
+	_SYMBOLS,
+	_MACROS,
+	_NAV
+};
+
+#define KC_NMPD TG(_NUMPAD)
+#define KC_SYMB TG(_SYMBOLS)
+#define KC_SPFN LT(_NAV,KC_EQL)
+#define KC_SCTL MT(MOD_LCTL, KC_BSLS)
+#define KC_SCTR MT(MOD_LCTL, KC_RBRC)
+#define KC_SPLT MT(MOD_LALT, KC_MINS)
+#define KC_MESC LT(_MACROS, KC_ESC)
+#define KC_INCL M(0)
+#define KC_PULL M(1)
+#define KC_PUSH M(2)
+#define KC_SCAP M(3)
+#define KC_SCOF M(4)
+#define KC_CAD LALT(LCTL(KC_DEL))
+
+#define LONGPRESS_DELAY 150
+//#define LAYER_TOGGLE_DELAY 300
+
+// Fillers to make layering more clear
+#define _______ KC_TRNS
+#define XXXXXXX KC_NO
+#define KC_ KC_TRNS 
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+
+  [_QWERTY] = KC_KEYMAP(
+  //,----+----+----+----+----+----.    ,----+----+----+----+----+----.
+     MESC, Q  , W  , E  , R  , T  ,      Y  , U  , I  , O  , P  ,BSPC,
+  //|----+----+----+----+----+----|    |----+----+----+----+----+----|
+     TAB , A  , S  , D  , F  , G  ,      H  , J  , K  , L  ,SCLN, ENT,
+  //|----+----+----+----+----+----|    |----+----+----+----+----+----|
+     LSPO, Z  , X  , C  , V  , B  ,      N  , M  ,COMM,DOT ,SLSH,RSPC,
+  //|----+----+----+----+----+----|    |----+----+----+----+----+----|
+     SCTL,SPFN,SPLT,AMPR,NMPD,SPC ,     SPC ,SYMB,ASTR,EXLM,LBRC,SCTR
+  //`----+----+----+----+----+----'    `----+----+----+----+----+----'
+  ),
+
+  [_CAPS] = KC_KEYMAP(
+  //,----+----+----+----+----+----.    ,----+----+----+----+----+----.
+         ,    ,    ,    ,    ,    ,         ,    ,    ,    ,    ,    ,
+  //|----+----+----+----+----+----|    |----+----+----+----+----+----|
+         ,    ,    ,    ,    ,    ,         ,    ,    ,    ,COLN,    ,
+  //|----+----+----+----+----+----|    |----+----+----+----+----+----|
+         ,    ,    ,    ,    ,    ,         ,    ,    ,    ,    ,    ,
+  //|----+----+----+----+----+----|    |----+----+----+----+----+----|
+         ,    ,UNDS,    ,    ,    ,         ,    ,    ,    ,    ,    
+  //`----+----+----+----+----+----'    `----+----+----+----+----+----'
+  ),
+
+
+  [_NUMPAD] = KC_KEYMAP(
+  //,----+----+----+----+----+----.    ,----+----+----+----+----+----.
+         ,    ,    ,    ,    ,    ,         ,  7 ,  8 ,  9 ,MINS,QUOT,
+  //|----+----+----+----+----+----|    |----+----+----+----+----+----|
+         ,    ,    ,    ,    ,    ,         ,  4 ,  5 ,  6 ,PLUS, ENT,
+  //|----+----+----+----+----+----|    |----+----+----+----+----+----|
+     LSFT,    ,    ,    ,    ,    ,         ,  1 ,  2 ,  3 ,ASTR, EQL,
+  //|----+----+----+----+----+----|    |----+----+----+----+----+----|
+         ,    ,    ,    ,    ,BSPC,     SPC ,  0 ,  0 , DOT,SLSH,    
+  //`----+----+----+----+----+----'    `----+----+----+----+----+----'
+  ),
+
+  [_SYMBOLS] = KC_KEYMAP(
+  //,----+----+----+----+----+----.    ,----+----+----+----+----+----.
+         ,EXLM, AT ,HASH,DLR ,PERC,     CIRC,AMPR,ASTR,LPRN,RPRN,QUOT,
+  //|----+----+----+----+----+----|    |----+----+----+----+----+----|
+      F1 , F2 , F3 , F4 , F5 , F6 ,     TILD,EQL ,UNDS,LCBR,RCBR,PIPE,
+  //|----+----+----+----+----+----|    |----+----+----+----+----+----|
+      F7 , F8 , F9 , F10, F11, F12,     GRV ,PLUS,MINS,LBRC,RBRC,BSLS,
+  //|----+----+----+----+----+----|    |----+----+----+----+----+----|
+         ,    ,    ,    , NO ,BSPC,     SPC ,    ,    ,    ,    ,    
+  //`----+----+----+----+----+----'    `----+----+----+----+----+----'
+  ),
+
+  [_NAV] = KC_KEYMAP(
+  //,----+----+----+----+----+----.    ,----+----+----+----+----+----.
+         ,    ,    ,    , DEL,BSPC,         ,HOME, UP , END, INS,PSCR,
+  //|----+----+----+----+----+----|    |----+----+----+----+----+----|
+         ,    ,    ,LSFT,LCTL, ENT,         ,LEFT,DOWN,RGHT, DEL,   ,
+  //|----+----+----+----+----+----|    |----+----+----+----+----+----|
+         ,    ,    ,    ,    ,    ,         ,PGUP,PGDN,    ,    ,    ,
+  //|----+----+----+----+----+----|    |----+----+----+----+----+----|
+         ,    ,    ,    ,    ,DEL ,         ,    ,    ,    ,    ,   
+  //`----+----+----+----+----+----'    `----+----+----+----+----+----'
+  ),
+
+  [_MACROS] = KC_KEYMAP(
+  //,----+----+----+----+----+----.    ,----+----+----+----+----+----.
+         ,    ,    ,    ,    ,    ,         ,    ,INCL,    ,    ,    ,
+  //|----+----+----+----+----+----|    |----+----+----+----+----+----|
+         ,    ,    ,CAD ,    ,    ,         ,    ,    ,    ,    ,    ,
+  //|----+----+----+----+----+----|    |----+----+----+----+----+----|
+     SCAP,    ,    ,    ,    ,    ,         ,    ,PULL,PUSH,    ,SCAP,
+  //|----+----+----+----+----+----|    |----+----+----+----+----+----|
+         ,    ,    ,    ,    ,    ,         ,    ,    ,    ,    ,   
+  //`----+----+----+----+----+----'    `----+----+----+----+----+----'
+  ),
+
+};
+
+
+const uint16_t PROGMEM fn_actions[] = {
+
+};
+
+const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt)
+{
+  switch(id) {
+    /* include some kind of library or header */
+    case 0:
+      if (record->event.pressed) {
+        SEND_STRING("#include <>");
+        return MACRO( T(LEFT), END);
+      }
+      break;
+    case 1:
+      if (record->event.pressed) {
+        SEND_STRING("git pull");
+        return MACRO( T(ENT), END );
+      }
+      break;
+    case 2:
+      if (record->event.pressed){
+        SEND_STRING("git push");
+        return MACRO( T(ENT), END );
+      }
+      break;
+    case 3:
+      if (record->event.pressed){
+        layer_on(_CAPS);
+        register_code(KC_CAPSLOCK);
+        unregister_code(KC_CAPSLOCK);
+      }
+      break;
+    case 4:
+      if (record->event.pressed){
+        layer_off(_CAPS);
+        register_code(KC_CAPSLOCK);
+        unregister_code(KC_CAPSLOCK);
+      }
+      break;
+  }
+  return MACRO_NONE;
+};
+ 
+
+void matrix_scan_user(void) {
+    uint8_t layer = biton32(layer_state);
+    
+    switch (layer) {
+    	case _QWERTY:
+    	    set_led_green;
+    	    break;
+        case _CAPS:
+	    set_led_white;
+	    break;
+        case _NUMPAD:
+            set_led_blue;
+            break;
+        case _SYMBOLS:
+            set_led_red;
+            break;
+        case _NAV:
+	    set_led_magenta;
+	    break;
+        case _MACROS:
+	    set_led_cyan;
+	    break;
+       default:
+            set_led_green;
+            break;
+    }
+};

keyboards/chimera_ls/matrix.c

@@ -0,0 +1,168 @@
+/*
+Copyright 2012 Jun Wako
+Copyright 2014 Jack Humbert
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+#include <stdint.h>
+#include <stdbool.h>
+#if defined(__AVR__)
+#include <avr/io.h>
+#endif
+#include "wait.h"
+#include "print.h"
+#include "debug.h"
+#include "util.h"
+#include "matrix.h"
+#include "timer.h"
+
+#if (MATRIX_COLS <= 8)
+#    define print_matrix_header()  print("\nr/c 01234567\n")
+#    define print_matrix_row(row)  print_bin_reverse8(matrix_get_row(row))
+#    define matrix_bitpop(i)       bitpop(matrix[i])
+#    define ROW_SHIFTER ((uint8_t)1)
+#elif (MATRIX_COLS <= 16)
+#    define print_matrix_header()  print("\nr/c 0123456789ABCDEF\n")
+#    define print_matrix_row(row)  print_bin_reverse16(matrix_get_row(row))
+#    define matrix_bitpop(i)       bitpop16(matrix[i])
+#    define ROW_SHIFTER ((uint16_t)1)
+#elif (MATRIX_COLS <= 32)
+#    define print_matrix_header()  print("\nr/c 0123456789ABCDEF0123456789ABCDEF\n")
+#    define print_matrix_row(row)  print_bin_reverse32(matrix_get_row(row))
+#    define matrix_bitpop(i)       bitpop32(matrix[i])
+#    define ROW_SHIFTER  ((uint32_t)1)
+#elif (MATRIX_COLS <= 64)
+#    define print_matrix_header()  print("\nr/c 0123456789ABCDEF0123456789ABCDEF0123456789ABCDEF\n")
+#    define print_matrix_row(row)  print_bin_reverse64(matrix_get_row(row))
+#    define matrix_bitpop(i)       bitpop64(matrix[i])
+#    define ROW_SHIFTER  ((uint64_t)1)
+#endif
+
+/* matrix state(1:on, 0:off) */
+static matrix_row_t matrix[MATRIX_ROWS];
+
+__attribute__ ((weak))
+void matrix_init_quantum(void) {
+    matrix_init_kb();
+}
+
+__attribute__ ((weak))
+void matrix_scan_quantum(void) {
+    matrix_scan_kb();
+}
+
+__attribute__ ((weak))
+void matrix_init_kb(void) {
+    matrix_init_user();
+}
+
+__attribute__ ((weak))
+void matrix_scan_kb(void) {
+    matrix_scan_user();
+}
+
+__attribute__ ((weak))
+void matrix_init_user(void) {
+}
+
+__attribute__ ((weak))
+void matrix_scan_user(void) {
+}
+
+inline
+uint8_t matrix_rows(void) {
+    return MATRIX_ROWS;
+}
+
+inline
+uint8_t matrix_cols(void) {
+    return MATRIX_COLS;
+}
+
+void matrix_init(void) {
+    matrix_init_quantum();
+}
+
+uint8_t matrix_scan(void)
+{
+    SERIAL_UART_INIT();
+
+    uint32_t timeout = 0;
+
+    //the s character requests the RF slave to send the matrix
+    SERIAL_UART_DATA = 's';
+
+    //trust the external keystates entirely, erase the last data
+    uint8_t uart_data[11] = {0};
+
+    //there are 10 bytes corresponding to 10 columns, and an end byte
+    for (uint8_t i = 0; i < 11; i++) {
+        //wait for the serial data, timeout if it's been too long
+        //this only happened in testing with a loose wire, but does no
+        //harm to leave it in here
+        while(!SERIAL_UART_RXD_PRESENT){
+            timeout++;
+            if (timeout > 10000){
+                break;
+            }
+        } 
+        uart_data[i] = SERIAL_UART_DATA;
+    }
+
+    //check for the end packet, the key state bytes use the LSBs, so 0xE0
+    //will only show up here if the correct bytes were recieved
+    if (uart_data[10] == 0xE0)
+    {
+        //shifting and transferring the keystates to the QMK matrix variable
+        for (uint8_t i = 0; i < MATRIX_ROWS; i++) {
+            matrix[i] = (uint16_t) uart_data[i*2] | (uint16_t) uart_data[i*2+1] << 5;
+        }
+    }
+
+
+    matrix_scan_quantum();
+    return 1;
+}
+
+inline
+bool matrix_is_on(uint8_t row, uint8_t col)
+{
+    return (matrix[row] & ((matrix_row_t)1<col));
+}
+
+inline
+matrix_row_t matrix_get_row(uint8_t row)
+{
+    return matrix[row];
+}
+
+void matrix_print(void)
+{
+    print_matrix_header();
+
+    for (uint8_t row = 0; row < MATRIX_ROWS; row++) {
+        phex(row); print(": ");
+        print_matrix_row(row);
+        print("\n");
+    }
+}
+
+uint8_t matrix_key_count(void)
+{
+    uint8_t count = 0;
+    for (uint8_t i = 0; i < MATRIX_ROWS; i++) {
+        count += matrix_bitpop(i);
+    }
+    return count;
+}

keyboards/chimera_ls/readme.md

@@ -0,0 +1,19 @@
+# Chimera LS
+
+![Chimera LS](https://imgur.com/FOGlO4M.jpg)
+
+A wireless version of the let's split: a split 40% ortholinear keyboard 
+
+Keyboard Maintainer: [William Wilson](https://github.com/GlenPickle)  
+
+
+Hardware Supported: Chimera LS PCB, WaveShare core nRF51822
+
+Hardware Availability: [Gerbers](https://github.com/GlenPickle/Chimera/tree/master/ls/gerbers)
+
+Make example for this keyboard (after setting up your build environment):
+
+    make chimera_ls:default
+
+See [build environment setup](https://docs.qmk.fm/build_environment_setup.html) then the [make instructions](https://docs.qmk.fm/make_instructions.html) for more information.
+

keyboards/chimera_ls/rules.mk

@@ -0,0 +1,82 @@
+
+OPT_DEFS += -DCHIMERA_LS_PROMICRO
+CHIMERA_LS_UPLOAD_COMMAND = while [ ! -r $(USB) ]; do sleep 1; done; \
+                         avrdude -p $(MCU) -c avr109 -U flash:w:$(TARGET).hex -P $(USB)
+
+# # project specific files
+SRC = matrix.c
+
+
+# MCU name
+#MCU = at90usb1287
+MCU = atmega32u4
+
+# Processor frequency.
+#     This will define a symbol, F_CPU, in all source code files equal to the
+#     processor frequency in Hz. You can then use this symbol in your source code to
+#     calculate timings. Do NOT tack on a 'UL' at the end, this will be done
+#     automatically to create a 32-bit value in your source code.
+#
+#     This will be an integer division of F_USB below, as it is sourced by
+#     F_USB after it has run through any CPU prescalers. Note that this value
+#     does not *change* the processor frequency - it should merely be updated to
+#     reflect the processor speed set externally so that the code can use accurate
+#     software delays.
+F_CPU = 16000000
+
+
+#
+# LUFA specific
+#
+# Target architecture (see library "Board Types" documentation).
+ARCH = AVR8
+
+# Input clock frequency.
+#     This will define a symbol, F_USB, in all source code files equal to the
+#     input clock frequency (before any prescaling is performed) in Hz. This value may
+#     differ from F_CPU if prescaling is used on the latter, and is required as the
+#     raw input clock is fed directly to the PLL sections of the AVR for high speed
+#     clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
+#     at the end, this will be done automatically to create a 32-bit value in your
+#     source code.
+#
+#     If no clock division is performed on the input clock inside the AVR (via the
+#     CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
+F_USB = $(F_CPU)
+
+# Bootloader
+#     This definition is optional, and if your keyboard supports multiple bootloaders of
+#     different sizes, comment this out, and the correct address will be loaded 
+#     automatically (+60). See bootloader.mk for all options.
+BOOTLOADER = caterina
+
+# Interrupt driven control endpoint task(+60)
+OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
+
+# Boot Section Size in *bytes*
+#   Teensy halfKay   512
+#   Teensy++ halfKay 1024
+#   Atmel DFU loader 4096
+#   LUFA bootloader  4096
+#   USBaspLoader     2048
+OPT_DEFS += -DBOOTLOADER_SIZE=4096
+
+
+# Build Options
+#   comment out to disable the options.
+#
+#BOOTMAGIC_ENABLE = yes	# Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE = yes	# Mouse keys(+4700)
+EXTRAKEY_ENABLE = yes	# Audio control and System control(+450)
+CONSOLE_ENABLE = yes	# Console for debug(+400)
+COMMAND_ENABLE = yes   # Commands for debug and configuration
+CUSTOM_MATRIX = yes    # Remote matrix from the wireless bridge
+# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
+# SLEEP_LED_ENABLE = yes  # Breathing sleep LED during USB suspend
+NKRO_ENABLE = yes		# USB Nkey Rollover - not yet supported in LUFA
+# BACKLIGHT_ENABLE = yes  # Enable keyboard backlight functionality
+# MIDI_ENABLE = YES 		# MIDI controls
+UNICODE_ENABLE = YES 		# Unicode
+# BLUETOOTH_ENABLE = yes # Enable Bluetooth with the Adafruit EZ-Key HID
+
+USB = /dev/ttyACM0

keyboards/chimera_ortho/chimera_ortho.h

@@ -49,7 +49,7 @@
 // This a shortcut to help you visually see your layout.
 // The first section contains all of the arguements
 // The second converts the arguments into a two-dimensional array
-#define KEYMAP( \
+#define KC_KEYMAP( \
   k00, k01, k02, k03, k04, k05, k06,      k07, k08, k09, k10, k11, k12, k13, \
   k14, k15, k16, k17, k18, k19, k20,      k21, k22, k23, k24, k25, k26, k27, \
   k28, k29, k31, k32, k33, k34, k35,      k36, k37, k38, k41, k42, k43, k44,\
@@ -63,4 +63,17 @@
 	{ KC_NO,      KC_##k28, KC_##k14, KC_##k00, KC_##k45,      KC_##k48, KC_##k13, KC_##k27, KC_##k44, KC_NO }, \
 }
 
+#define KEYMAP( \
+  k00, k01, k02, k03, k04, k05, k06,      k07, k08, k09, k10, k11, k12, k13, \
+  k14, k15, k16, k17, k18, k19, k20,      k21, k22, k23, k24, k25, k26, k27, \
+  k28, k29, k31, k32, k33, k34, k35,      k36, k37, k38, k41, k42, k43, k44,\
+                      k45, k46,               k47, k48      \
+) \
+{ \
+	{ k01,   k02, k03, k04, k05,      k08, k09, k10, k11, k12   }, \
+	{ k15,   k16, k17, k18, k19,      k22, k23, k24, k25, k26   }, \
+	{ k29,   k31, k32, k33, k34,      k37, k38, k41, k42, k43   }, \
+	{ KC_NO,      k06, k20, k35, k46,      k47, k36, k21, k07, KC_NO },  \
+	{ KC_NO,      k28, k14, k00, k45,      k48, k13, k27, k44, KC_NO }, \
+}
 #endif

keyboards/chimera_ortho/keymaps/default/keymap.c

@@ -44,7 +44,7 @@ enum chimera_ortho_layers
 
 const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
 
-  [_QWERTY] = KEYMAP(  
+  [_QWERTY] = KC_KEYMAP(  
   //,----+----+----+----+----+----+----.     ,----+----+----+----+----+----+----.
      MESC, Q  , W  , E  , R  , T  ,SCTL,      SCTR, Y  , U  , I  , O  , P  ,QUOT,
   //|----+----+----+----+----+----+----|     |----+----+----+----+----+----+----|
@@ -56,7 +56,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
   // \------------------+----+----+---/       \---+----+----+-------------------/
   ),
 
-  [_CAPS] = KEYMAP(  
+  [_CAPS] = KC_KEYMAP(  
   //,----+----+----+----+----+----+----.     ,----+----+----+----+----+----+----.
          ,    ,    ,    ,    ,    ,    ,          ,    ,    ,    ,    ,    ,    ,
   //|----+----+----+----+----+----+----|     |----+----+----+----+----+----+----|
@@ -68,7 +68,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
   // \------------------+----+----+---/       \---+----+----+-------------------/
   ),
 
-  [_NUMPAD] = KEYMAP(  
+  [_NUMPAD] = KC_KEYMAP(  
   //,----+----+----+----+----+----+----.     ,----+----+----+----+----+----+----.
          ,    ,COLN ,    ,    ,    ,    ,          ,    , 7  , 8  , 9  ,ASTR,MINS,
   //|----+----+----+----+----+----+----|     |----+----+----+----+----+----+----|
@@ -80,7 +80,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
   // \------------------+----+----+---/       \---+----+----+-------------------/
   ),
 
-  [_SYMBOLS] = KEYMAP(  
+  [_SYMBOLS] = KC_KEYMAP(  
   //,----+----+----+----+----+----+----.     ,----+----+----+----+----+----+----.
          ,EXLM, AT ,HASH,DLR ,PERC,    ,          ,CIRC,AMPR,ASTR,LPRN,RPRN,BSLS,
   //|----+----+----+----+----+----+----|     |----+----+----+----+----+----+----|
@@ -92,7 +92,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
   // \------------------+----+----+---/       \---+----+----+-------------------/
   ),
 
-  [_NAV] = KEYMAP(  
+  [_NAV] = KC_KEYMAP(  
   //,----+----+----+----+----+----+----.     ,----+----+----+----+----+----+----.
          ,    ,    ,    ,    ,    ,    ,          ,    ,    , UP ,    ,PSCR,    ,
   //|----+----+----+----+----+----+----|     |----+----+----+----+----+----+----|
@@ -104,7 +104,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
   // \------------------+----+----+---/       \---+----+----+-------------------/
   ),
 
-  [_MACROS] = KEYMAP(  
+  [_MACROS] = KC_KEYMAP(  
   //,----+----+----+----+----+----+----.     ,----+----+----+----+----+----+----.
          ,    ,    ,    ,    ,    ,    ,          ,    ,    ,INCL,    ,    ,    ,
   //|----+----+----+----+----+----+----|     |----+----+----+----+----+----+----|

keyboards/chimera_ortho/keymaps/gordon/keymap.c

@@ -206,7 +206,7 @@ qk_tap_dance_action_t tap_dance_actions[] = {
 
 const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
 
-  [_QWERTY] = KEYMAP(
+  [_QWERTY] = KC_KEYMAP(
   //,----+----+----+----+----+----+----.      ,----+----+----+----+----+----+----.
      MESC, Q  ,CSHW,ENAV, R  , T  ,SPC ,       CLPS, Y  , U  ,INAV, O  , P  ,TTT,
   //|----+----+----+----+----+----+----|      |----+----+----+----+----+----+----|
@@ -218,7 +218,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
   // \------------------+----+----+---/       \---+----+----+-------------------/
   ),
 
-  [_NUMPAD] = KEYMAP(  
+  [_NUMPAD] = KC_KEYMAP(  
   //,----+----+----+----+----+----+----.     ,----+----+----+----+----+----+----.
          ,    ,    ,    ,ASTR,    ,    ,          ,    , 7  , 8  , 9  ,ASTR,/**/,
   //|----+----+----+----+----+----+----|     |----+----+----+----+----+----+----|
@@ -230,7 +230,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
   // \------------------+----+----+---/       \---+----+----+-------------------/
   ),
 
-  [_SYMBOLS] = KEYMAP(  
+  [_SYMBOLS] = KC_KEYMAP(  
   //,----+----+-----+----+----+----+----.     ,----+----+----+----+----+----+----.
          ,EXLM, AT  ,LCBR,RCBR,HASH,    ,          ,CIRC,AMPR,ASTR,LPRN,RPRN,/**/,
   //|----+----+-----+----+----+----+----|     |----+----+----+----+----+----+----|
@@ -242,7 +242,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
   // \-------------------+----+----+---/       \---+----+----+-------------------/
   ),
 
-  [_FUNCTION] = KEYMAP(  
+  [_FUNCTION] = KC_KEYMAP(  
   //,----+----+----+----+----+----+----.     ,----+----+----+----+----+----+----.
     F6F7 ,F1  ,F2  ,F3  ,ALF4,F5  ,F6  ,      F7  ,F8  ,F9  ,F10 ,F11 ,F12 ,/**/,
   //|----+----+----+----+----+----+----|     |----+----+----+----+----+----+----|
@@ -254,7 +254,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
   // \------------------+----+----+---/       \---+----+----+-------------------/
   ),
 
-  [_NAV] = KEYMAP(  
+  [_NAV] = KC_KEYMAP(  
   //,----+----+----+----+----+----+----.     ,----+----+----+----+----+----+----.
       ,   ,SNAPLEFT,/**/,SNAPRIGHT,,  ,           ,    ,    , UP ,    ,    ,    ,
   //|----+----+----+----+----+----+----|     |----+----+----+----+----+----+----|
@@ -266,7 +266,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
   // \------------------+----+----+---/       \---+----+----+-------------------/
   ),
 
-  [_TEXTNAV] = KEYMAP(  
+  [_TEXTNAV] = KC_KEYMAP(  
   //,----+----+----+----+----+----+----.     ,----+----+----+----+----+----+----.
          ,   ,    ,    ,    ,    ,  ,             ,    ,    ,/**/,    ,    ,    ,
   //|----+----+----+----+----+----+----|     |----+----+----+----+----+----+----|
@@ -278,7 +278,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
   // \------------------+----+----+---/       \---+----+----+-------------------/
   ),
 
-   [_MOUSE] = KEYMAP(  
+   [_MOUSE] = KC_KEYMAP(  
   //,----+----+----+----+----+----+----.     ,----+----+----+----+----+----+----.
          ,    ,    ,MS_UP,   ,   ,    ,      ,    ,    , UP ,    ,    ,    ,/**/
   //|----+----+----+----+----+----+----|     |----+----+----+----+----+----+----|
@@ -291,7 +291,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
   ), 
 
 
-  [_MACROS] = KEYMAP(  
+  [_MACROS] = KC_KEYMAP(  
   //,----+----+----+----+----+----+----.     ,----+----+----+----+----+----+----.
     /**/,RESET,SECRET_2,SECRET_3,   ,   ,   ,SYSTEM_SLEEP,    ,    ,INCL,    ,    ,    ,
   //|----+----+----+----+----+----+----|     |----+----+----+----+----+----+----|

keyboards/deltasplit75/split_util.h

@@ -2,11 +2,8 @@
 #define SPLIT_KEYBOARD_UTIL_H
 
 #include <stdbool.h>
+#include "eeconfig.h"
 
-#ifdef EE_HANDS
-	#define EECONFIG_BOOTMAGIC_END      (uint8_t *)10
-	#define EECONFIG_HANDEDNESS         EECONFIG_BOOTMAGIC_END
-#endif
 
 #define SLAVE_I2C_ADDRESS           0x32
 

keyboards/dilly/README.md

@@ -0,0 +1,14 @@
+Dilly
+=====
+
+A 3x10 ortholinear keyboard using Kailh PG1350 Lower Profile Choc switches.
+
+Keyboard Maintainer: Keebio  
+Hardware Supported: Dilly PCB, Arduino Pro Micro  
+Hardware Availability: [Keebio](https://keeb.io)
+
+Make example for this keyboard (after setting up your build environment):
+
+    make dilly:default
+
+See [build environment setup](https://docs.qmk.fm/build_environment_setup.html) then the [make instructions](https://docs.qmk.fm/make_instructions.html) for more information.

keyboards/dilly/config.h

@@ -0,0 +1,62 @@
+#ifndef CONFIG_H
+#define CONFIG_H
+
+#include "config_common.h"
+
+/* USB Device descriptor parameter */
+#define VENDOR_ID       0xCB10
+#define PRODUCT_ID      0x113a
+#define DEVICE_VER      0x0100
+#define MANUFACTURER    Keebio
+#define PRODUCT         Dilly
+#define DESCRIPTION     30 percent ortholinear keyboard
+
+/* key matrix size */
+#define MATRIX_ROWS 6
+#define MATRIX_COLS 5
+
+/* key matrix pins */
+#define MATRIX_ROW_PINS { D7, E6, B4, B1, B3, B2 }
+#define MATRIX_COL_PINS { D2, D4, C6, F6, F5 }
+#define UNUSED_PINS
+
+/* COL2ROW or ROW2COL */
+#define DIODE_DIRECTION COL2ROW
+
+/* number of backlight levels */
+#define BACKLIGHT_PIN B5
+#ifdef BACKLIGHT_PIN
+#define BACKLIGHT_LEVELS 3
+#endif
+
+/* Set 0 if debouncing isn't needed */
+#define DEBOUNCING_DELAY 5
+
+/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
+#define LOCKING_SUPPORT_ENABLE
+
+/* Locking resynchronize hack */
+#define LOCKING_RESYNC_ENABLE
+
+/* key combination for command */
+#define IS_COMMAND() ( \
+    keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
+)
+
+/* prevent stuck modifiers */
+#define PREVENT_STUCK_MODIFIERS
+
+
+#ifdef RGB_DI_PIN
+#define RGBLIGHT_ANIMATIONS
+#define RGBLIGHT_HUE_STEP 8
+#define RGBLIGHT_SAT_STEP 8
+#define RGBLIGHT_VAL_STEP 8
+#endif
+#define RGB_DI_PIN D3
+#define RGBLIGHT_TIMER
+#define RGBLED_NUM 10
+#define ws2812_PORTREG  PORTD
+#define ws2812_DDRREG   DDRD
+
+#endif

keyboards/dilly/dilly.c

@@ -0,0 +1 @@
+#include "dilly.h"

keyboards/dilly/dilly.h

@@ -0,0 +1,31 @@
+#ifndef DILLY_H
+#define DILLY_H
+
+#include "quantum.h"
+
+#define KEYMAP( \
+    A1, A2, A3, A4, A5, A6, A7, A8, A9, A10, \
+    B1, B2, B3, B4, B5, B6, B7, B8, B9, B10, \
+    C1, C2, C3, C4, C5, C6, C7, C8, C9, C10 \
+) { \
+    { A1, A2, A3, A4, A5 }, \
+    { B1, B2, B3, B4, B5 }, \
+    { C1, C2, C3, C4, C5 }, \
+    { A10, A9, A8, A7, A6 }, \
+    { B10, B9, B8, B7, B6 }, \
+    { C10, C9, C8, C7, C6 } \
+}
+
+// Used to create a keymap using only KC_ prefixed keys
+#define KC_KEYMAP( \
+    A1, A2, A3, A4, A5, A6, A7, A8, A9, A10, \
+    B1, B2, B3, B4, B5, B6, B7, B8, B9, B10, \
+    C1, C2, C3, C4, C5, C6, C7, C8, C9, C10 \
+) \
+    KEYMAP( \
+        KC_##A1, KC_##A2, KC_##A3, KC_##A4, KC_##A5, KC_##A6, KC_##A7, KC_##A8, KC_##A9, KC_##A10, \
+        KC_##B1, KC_##B2, KC_##B3, KC_##B4, KC_##B5, KC_##B6, KC_##B7, KC_##B8, KC_##B9, KC_##B10, \
+        KC_##C1, KC_##C2, KC_##C3, KC_##C4, KC_##C5, KC_##C6, KC_##C7, KC_##C8, KC_##C9, KC_##C10 \
+    )
+
+#endif

keyboards/dilly/keymaps/default/config.h

@@ -0,0 +1,6 @@
+#ifndef CONFIG_USER_H
+#define CONFIG_USER_H
+
+#include "../../config.h"
+
+#endif

keyboards/dilly/keymaps/default/keymap.c

@@ -0,0 +1,107 @@
+#include "dilly.h"
+#include "action_layer.h"
+
+extern keymap_config_t keymap_config;
+
+#define _BASE 0
+#define _FN1 1
+#define _FN2 2
+#define _FN3 3
+#define _FN4 4
+#define _FN5 5
+
+#define KC_ KC_TRNS
+#define _______ KC_TRNS
+
+// Tap-Hold keys
+#define KC_ASFT MT(MOD_LSFT, KC_A)
+#define KC_F_L3 LT(_FN3, KC_F)
+#define KC_ZCTL MT(MOD_LCTL, KC_Z)
+#define KC_XALT MT(MOD_LALT, KC_X)
+#define KC_CGUI MT(MOD_LGUI, KC_C)
+#define KC_V_L4 LT(_FN4, KC_V)
+#define KC_SPL2 LT(_FN2, KC_SPC)
+#define KC_B_L1 LT(_FN1, KC_B)
+#define KC_N_L5 LT(_FN5, KC_N)
+#define KC_MALT MT(MOD_RALT, KC_M)
+#define KC_BSCT MT(MOD_RCTL, KC_BSPC)
+#define KC_ENTS MT(MOD_RSFT, KC_ENT)
+#define KC_ESCS MT(MOD_RSFT, KC_ESC)
+
+#define KC_GUIC LGUI(KC_C)
+
+#define KC_RST RESET
+#define KC_BL_S BL_STEP
+#define KC_DBUG DEBUG
+#define KC_RTOG RGB_TOG
+#define KC_RMOD RGB_MOD
+#define KC_RHUI RGB_HUI
+#define KC_RHUD RGB_HUD
+#define KC_RSAI RGB_SAI
+#define KC_RSAD RGB_SAD
+#define KC_RVAI RGB_VAI
+#define KC_RVAD RGB_VAD
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+
+  [_BASE] = KC_KEYMAP(
+  //,----+----+----+----+----+----+----+----+----+----.
+      Q  , W  , E  , R  , T  , Y  , U  , I  , O  , P  ,
+  //|----+----+----+----+----+----+----+----+----+----|
+     ASFT, S  , D  ,F_L3, G  , H  , J  , K  , L  ,ESCS,
+  //|----+----+----+----+----+----+----+----+----+----|
+     ZCTL,XALT,CGUI,V_L4,SPL2,B_L1,N_L5,MALT,BSCT,ENTS
+  //`----+----+----+----+----+----+----+----+----+----'
+  ),
+
+  [_FN1] = KC_KEYMAP(
+  //,----+----+----+----+----+----+----+----+----+----.
+      1  , 2  , 3  , 4  , 5  , 6  , 7  , 8  , 9  , 0  ,
+  //|----+----+----+----+----+----+----+----+----+----|
+      F1 , F2 , F3 , F4 , F5 , F6 , F7 , F8 , F9 ,F10 ,
+  //|----+----+----+----+----+----+----+----+----+----|
+         ,    ,    ,    ,BSPC,    ,    ,    ,    ,    
+  //`----+----+----+----+----+----+----+----+----+----'
+  ),
+
+  [_FN2] = KC_KEYMAP(
+  //,----+----+----+----+----+----+----+----+----+----.
+     EXLM, AT ,HASH,DLR ,PERC,CIRC,AMPR,ASTR,LPRN,RPRN,
+  //|----+----+----+----+----+----+----+----+----+----|
+     F11 ,F12 ,    ,    ,    ,    ,    ,    ,    ,GRV ,
+  //|----+----+----+----+----+----+----+----+----+----|
+         ,    ,    ,    ,    ,DEL ,    ,    ,    ,    
+  //`----+----+----+----+----+----+----+----+----+----'
+  ),
+
+  [_FN3] = KC_KEYMAP(
+  //,----+----+----+----+----+----+----+----+----+----.
+         ,    ,    ,    ,    ,MINS,EQL ,LBRC,RBRC,BSLS,
+  //|----+----+----+----+----+----+----+----+----+----|
+     TAB ,    ,    ,    ,    ,COMM,DOT ,SLSH,SCLN,QUOT,
+  //|----+----+----+----+----+----+----+----+----+----|
+         ,    ,    ,    ,BSPC,    ,LEFT,DOWN, UP ,RGHT
+  //`----+----+----+----+----+----+----+----+----+----'
+  ),
+
+  [_FN4] = KC_KEYMAP(
+  //,----+----+----+----+----+----+----+----+----+----.
+         ,    ,    ,    ,    ,UNDS,PLUS,LCBR,RCBR,PIPE,
+  //|----+----+----+----+----+----+----+----+----+----|
+     TAB ,    ,    ,    ,    , LT , GT ,QUES,COLN,DQUO,
+  //|----+----+----+----+----+----+----+----+----+----|
+         ,    ,GUIC,    ,BSPC,    ,HOME,PGDN,PGUP,END 
+  //`----+----+----+----+----+----+----+----+----+----'
+  ),
+
+  [_FN5] = KC_KEYMAP(
+  //,----+----+----+----+----+----+----+----+----+----.
+     RTOG,RMOD,    ,RST ,RHUI,RSAI,RVAI,    ,    ,    ,
+  //|----+----+----+----+----+----+----+----+----+----|
+         ,    ,DBUG,    ,RHUD,RSAD,RVAD,    ,    ,    ,
+  //|----+----+----+----+----+----+----+----+----+----|
+     BL_S,    ,GUIC,    ,    ,    ,    ,    ,    ,    
+  //`----+----+----+----+----+----+----+----+----+----'
+  )
+
+};

keyboards/dilly/keymaps/default/rules.mk

@@ -0,0 +1 @@
+RGBLIGHT_ENABLE = yes

keyboards/dilly/rules.mk

@@ -0,0 +1,56 @@
+# MCU name
+MCU = atmega32u4
+
+# Processor frequency.
+#     This will define a symbol, F_CPU, in all source code files equal to the
+#     processor frequency in Hz. You can then use this symbol in your source code to
+#     calculate timings. Do NOT tack on a 'UL' at the end, this will be done
+#     automatically to create a 32-bit value in your source code.
+#
+#     This will be an integer division of F_USB below, as it is sourced by
+#     F_USB after it has run through any CPU prescalers. Note that this value
+#     does not *change* the processor frequency - it should merely be updated to
+#     reflect the processor speed set externally so that the code can use accurate
+#     software delays.
+F_CPU = 16000000
+
+#
+# LUFA specific
+#
+# Target architecture (see library "Board Types" documentation).
+ARCH = AVR8
+
+# Input clock frequency.
+#     This will define a symbol, F_USB, in all source code files equal to the
+#     input clock frequency (before any prescaling is performed) in Hz. This value may
+#     differ from F_CPU if prescaling is used on the latter, and is required as the
+#     raw input clock is fed directly to the PLL sections of the AVR for high speed
+#     clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
+#     at the end, this will be done automatically to create a 32-bit value in your
+#     source code.
+#
+#     If no clock division is performed on the input clock inside the AVR (via the
+#     CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
+F_USB = $(F_CPU)
+
+# Interrupt driven control endpoint task(+60)
+OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
+
+
+# Boot Section Size in *bytes*
+OPT_DEFS += -DBOOTLOADER_SIZE=4096
+
+
+# Build Options
+#   comment out to disable the options.
+#
+BOOTMAGIC_ENABLE = yes	# Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE = yes	# Mouse keys(+4700)
+EXTRAKEY_ENABLE = yes	# Audio control and System control(+450)
+CONSOLE_ENABLE = no	# Console for debug(+400)
+COMMAND_ENABLE = no    # Commands for debug and configuration
+SLEEP_LED_ENABLE = no  # Breathing sleep LED during USB suspend
+NKRO_ENABLE = yes		# USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+BACKLIGHT_ENABLE = yes  # Enable keyboard backlight functionality
+AUDIO_ENABLE = no
+RGBLIGHT_ENABLE = yes

keyboards/ergodox_infinity/keymaps/halfkeyboard/config.h

@@ -0,0 +1,105 @@
+/*
+Copyright 2015 Jun Wako <wakojun@gmail.com>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#ifndef INFINITY_ERGODOX_CONFIG_H
+#define INFINITY_ERGODOX_CONFIG_H
+
+
+/* USB Device descriptor parameter */
+#define VENDOR_ID       0xFEED
+#define PRODUCT_ID      0x6464
+#define DEVICE_VER      0x0001
+/* in python2: list(u"whatever".encode('utf-16-le')) */
+/*   at most 32 characters or the ugly hack in usb_main.c borks */
+#define MANUFACTURER "TMK"
+#define USBSTR_MANUFACTURER    'T', '\x00', 'M', '\x00', 'K', '\x00', ' ', '\x00'
+#define PRODUCT "Infinity keyboard/TMK"
+#define USBSTR_PRODUCT         'I', '\x00', 'n', '\x00', 'f', '\x00', 'i', '\x00', 'n', '\x00', 'i', '\x00', 't', '\x00', 'y', '\x00', ' ', '\x00', 'k', '\x00', 'e', '\x00', 'y', '\x00', 'b', '\x00', 'o', '\x00', 'a', '\x00', 'r', '\x00', 'd', '\x00', '/', '\x00', 'T', '\x00', 'M', '\x00', 'K', '\x00'
+
+#define MOUSEKEY_INTERVAL       20
+#define MOUSEKEY_DELAY          0
+#define MOUSEKEY_TIME_TO_MAX    60
+#define MOUSEKEY_MAX_SPEED      7
+#define MOUSEKEY_WHEEL_DELAY 0
+
+#define TAPPING_TOGGLE  1
+
+/* define if matrix has ghost */
+//#define MATRIX_HAS_GHOST
+
+#define TAPPING_TERM    200
+#define IGNORE_MOD_TAP_INTERRUPT // this makes it possible to do rolling combos (zx) with keys that convert to other keys on hold (z becomes ctrl when you hold it, and when this option isn't enabled, z rapidly followed by x actually sends Ctrl-x. That's bad.)
+
+/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
+#define LOCKING_SUPPORT_ENABLE
+/* Locking resynchronize hack */
+#define LOCKING_RESYNC_ENABLE
+
+/* key combination for command */
+#define IS_COMMAND() ( \
+    keyboard_report->mods == (MOD_BIT(KC_LCTL) | MOD_BIT(KC_RCTL)) || \
+    keyboard_report->mods == (MOD_BIT(KC_LSFT) | MOD_BIT(KC_RSFT)) \
+)
+
+/* key matrix size */
+#define MATRIX_ROWS 18
+#define MATRIX_COLS 5
+#define LOCAL_MATRIX_ROWS 9
+
+/* number of backlight levels */
+#define BACKLIGHT_LEVELS 3
+
+#define LED_BRIGHTNESS_LO       100
+#define LED_BRIGHTNESS_HI       255
+
+/* define if matrix has ghost */
+//#define MATRIX_HAS_GHOST
+
+/* Set 0 if debouncing isn't needed */
+#define DEBOUNCE    5
+
+#define SERIAL_LINK_BAUD 562500
+#define SERIAL_LINK_THREAD_PRIORITY (NORMALPRIO - 1)
+
+#define VISUALIZER_USER_DATA_SIZE 16
+/*
+ * music mode options
+ * midi enabled
+ * keymask disabled
+ * so typing normally will result in music
+ *
+ */
+#define MUSIC_MASK keycode != KC_NO
+/*
+ * Feature disable options
+ *  These options are also useful to firmware size reduction.
+ */
+
+/* disable debug print */
+//#define NO_DEBUG
+
+/* disable print */
+//#define NO_PRINT
+
+/* disable action features */
+//#define NO_ACTION_LAYER
+//#define NO_ACTION_TAPPING
+//#define NO_ACTION_ONESHOT
+//#define NO_ACTION_MACRO
+//#define NO_ACTION_FUNCTION
+
+#endif

keyboards/ergodox_infinity/keymaps/halfkeyboard/keymap.c

@@ -2,15 +2,19 @@
 #include "debug.h"
 #include "action_layer.h"
 #include "version.h"
-
-#define QWERTY 0 // qwerty layer 
-#define HALFQWERTY 1 // mirrored qwerty layer 
-#define DVORAK 2 // dvorak layer 
-#define HALFDVORAK 3 // mirrored dvorak layer 
+#include "keymap_steno.h"
+#ifndef MIDI_ENABLE
+#error "Midi is not enabled"
+#endif
+#define QWERTY 0 // qwerty layer
+#define HALFQWERTY 1 // mirrored qwerty layer
+#define DVORAK 2 // dvorak layer
+#define HALFDVORAK 3 // mirrored dvorak layer
 #define SYMB 5 // symbols
 #define HALFSYMB 6 // media keys
 #define PLVR 7 // steno plover layout
 #define SHORTCUTS 8 //layer with shortcut keys
+#define MDIA 9
 
 
 enum custom_keycodes {
@@ -37,7 +41,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
  *                                        ,-------------.       ,-------------.
  *                                        |Symbol|Dvorak|       |Plover|HalfSymb|
  *                                 ,------|------|------|       |------+--------+------.
- *                                 |      |      | Home |       | PgUp |        |      |
+ *                                 |      |      |MU_TOG|       | PgUp |        |      |
  *                                 | Space|DELETE|------|       |------|  Tab   |Enter |
  *                                 |mirror|      | End  |       | PgDn |        |mirror|
  *                                 `--------------------'       `----------------------'
@@ -52,16 +56,16 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
         KC_LSFT,        KC_Z,  		  KC_X,   KC_C,   KC_V,   KC_B,   KC_MINUS,
         KC_LCTRL, 		KC_LALT,	  LCTL(LSFT(KC_TAB)),LCTL(KC_TAB),  MO(SHORTCUTS),
                                               TG(SYMB),  TG(DVORAK),
-                                                              KC_HOME,
+                                                              MU_ON,
                                          LT(HALFQWERTY, KC_SPACE),KC_DEL,KC_END,
         // right hand
              KC_BSLS,     KC_6,   KC_7,  KC_8,   KC_9,   KC_0,             KC_BSPC,
              KC_RBRC,    KC_Y,   KC_U,  KC_I,   KC_O,   KC_P,             KC_SLASH,
                           KC_H,   KC_J,  KC_K,   KC_L,   KC_SCLN,		   KC_ENT,
              KC_EQL,KC_N,   KC_M,  KC_COMM,KC_DOT, KC_SLASH,   	   KC_RSFT,
-                                  KC_RGUI, KC_UP,KC_DOWN,KC_RALT,           KC_RCTRL,
-             TG(PLVR),        TG(HALFSYMB),
-             KC_PGUP,
+                                  MO(MDIA), KC_UP,KC_DOWN,KC_RALT,           KC_RCTRL,
+             TG(PLVR),        TG(MDIA),
+             MU_OFF,
              KC_PGDN,KC_TAB, LT(HALFQWERTY, KC_ENT)
     ),
 /* Keymap 1: mirrored qwerty
@@ -95,16 +99,16 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
         KC_LSFT,        KC_SLASH,  	  KC_DOT, KC_COMM,KC_M,   KC_N,   KC_EQL,
         KC_LCTRL, 		KC_LALT,	   LCTL(LSFT(KC_TAB)),LCTL(KC_TAB),  KC_TRNS,
                                               KC_TRNS,  KC_TRANSPARENT,
-                                                              KC_HOME,
+                                                              KC_TRNS,
                                          KC_TRANSPARENT,KC_DEL,KC_END,
         // right hand
              KC_GRAVE,     KC_5,   KC_4,  KC_3,   KC_2,   KC_1,             KC_BSPC,
              KC_LBRC,    KC_T,   KC_R,  KC_E,   KC_W,   KC_Q,             KC_BSLS,
                           KC_G,   KC_F,  KC_D,   KC_S,   KC_A,  		   KC_ENT,
              KC_MINUS,KC_B,   KC_V,  KC_C,   KC_X,   KC_Z,		   	   KC_RSFT,
-                                  KC_RGUI, KC_UP,KC_DOWN,KC_RALT,           KC_RCTRL,
+                                  KC_TRNS, KC_UP,KC_DOWN,KC_RALT,           KC_RCTRL,
              KC_TRANSPARENT,        KC_TRNS,
-             KC_PGUP,
+             KC_TRNS,
              KC_PGDN,KC_TAB, KC_TRANSPARENT
     ),
 /* Keymap 3: dvorak
@@ -118,7 +122,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
  * |--------+------+------+------+------+------| -    |           | =    |------+------+------+------+------+--------|
  * | LShift |   ;  |   Q  |   J  |   K  |   X  |      |           |      |   B  |   M  |   W  |   V  |  Z   | RShift |
  * `--------+------+------+------+------+-------------'           `-------------+------+------+------+------+--------'
- *   |LCTRL|ALT  |CTLShTab|CTL-TAB| LGui|                                       |  RGui| UP   | DOWN |  ALT | RCTRL  |
+ *   |LCTRL|ALT  |CTLShTab|CTL-TAB| LGui|                                       | Mouse| UP   | DOWN |  ALT | RCTRL  |
  *   `----------------------------------'                                       `----------------------------------'
  *                                        ,-------------.       ,-------------.
  *                                        | Alt  |      |       |      |Alt   |
@@ -138,16 +142,16 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
         KC_LSFT,        KC_SCLN,	  KC_Q,   KC_J,   KC_K,   KC_X,   KC_MINUS,
         KC_LCTRL, 		KC_LALT,	  LCTL(LSFT(KC_TAB)),LCTL(KC_TAB),  KC_TRNS,
                                               TG(SYMB),  KC_TRANSPARENT,
-                                                              KC_HOME,
+                                                              KC_TRNS,
                               LT(HALFDVORAK, KC_SPACE),KC_DEL,KC_END,
         // right hand
              KC_BSLS,     KC_6,   KC_7,  KC_8,   KC_9,   KC_0,             KC_BSPC,
              KC_RBRC,    KC_F,   KC_G,  KC_C,   KC_R,   KC_L,             KC_SLASH,
                           KC_D,   KC_H,  KC_T,   KC_N,   KC_S,		   KC_ENT,
              KC_EQL,KC_B,   KC_M,  KC_W,	 KC_V,	 KC_Z,		   	   KC_RSFT,
-                                  KC_RGUI, KC_UP,KC_DOWN,KC_RALT,           KC_RCTRL,
-             KC_TRANSPARENT,        TG(HALFSYMB),
-             KC_PGUP,
+                                  KC_TRNS, KC_UP,KC_DOWN,KC_RALT,           KC_RCTRL,
+             KC_TRANSPARENT,        TG(MDIA),
+             KC_TRNS,
              KC_PGDN,KC_TAB, LT(HALFDVORAK, KC_ENT)
     ),
 /* Keymap 3: mirrored dvorak
@@ -161,7 +165,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
  * |--------+------+------+------+------+------| =    |           | -    |------+------+------+------+------+--------|
  * | LShift |   Z  |   V  |   W  |   M  |   B  |      |           |      |   X  |   K  |   J  |   Q  |   ;  | RShift |
  * `--------+------+------+------+------+-------------'           `-------------+------+------+------+------+--------'
- *   |LCTRL|ALT  |CTLShTab|CTL-TAB| LGui|                                       |  RGui| UP   | DOWN |  ALT | RCTRL  |
+ *   |LCTRL|ALT  |CTLShTab|CTL-TAB| LGui|                                       | MOUSE| UP   | DOWN |  ALT | RCTRL  |
  *   `----------------------------------'                                       `----------------------------------'
  *                                        ,-------------.       ,-------------.
  *                                        | Alt  |      |       |      |Alt   |
@@ -181,16 +185,16 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
         KC_LSFT,        KC_Z,  		  KC_V,   KC_W,   KC_M,   KC_B,   KC_EQL,
         KC_LCTRL, 		KC_LALT,	  LCTL(LSFT(KC_TAB)),LCTL(KC_TAB),  KC_TRNS,
                                               KC_TRANSPARENT,  KC_TRANSPARENT,
-                                                              KC_HOME,
+                                                              KC_TRNS,
                                          KC_TRANSPARENT,KC_DEL,KC_END,
         // right hand
              KC_GRAVE,     KC_5,   KC_4,  KC_3,   KC_2,   KC_5,             KC_ESC,
              KC_LBRC,    KC_Y,   KC_P,  KC_DOT, KC_COMM,KC_P,             KC_TAB,
                           KC_I,   KC_U,  KC_E,   KC_O,   KC_A,		 	   KC_BSPC,
              KC_MINUS,KC_X,   KC_K,  KC_J,	 KC_Q,   KC_SCLN,	   	   KC_RSFT,
-                                  KC_RGUI, KC_UP,KC_DOWN,KC_RALT,           KC_RCTRL,
+                                  KC_TRNS, KC_UP,KC_DOWN,KC_RALT,           KC_RCTRL,
              KC_TRANSPARENT,        KC_TRNS,
-             KC_PGUP,
+             KC_TRNS,
              KC_PGDN,KC_TAB, KC_TRANSPARENT
     ),
 /* Keymap 5: Symbol Layer
@@ -230,7 +234,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
        KC_NO, KC_UP, KC_KP_7, KC_KP_8,  KC_KP_9,KC_KP_ASTERISK, KC_KP_SLASH,
             KC_DOWN, KC_KP_4, KC_KP_5,  KC_KP_6,  KC_KP_MINUS, KC_KP_ENTER,
        KC_NO,KC_AMPR,KC_KP_1, KC_KP_2,  KC_KP_3,   KC_KP_PLUS, KC_NO,
-                         KC_NO,KC_DOT,  KC_0,    KC_KP_EQUAL,  KC_NO,
+                         KC_TRNS,KC_DOT,  KC_0,    KC_KP_EQUAL,  KC_NO,
        KC_NO, KC_TRNS,
        KC_NO,
        KC_NO, KC_NO, LT(HALFSYMB, KC_ENT)
@@ -265,16 +269,16 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
        KC_NO,KC_NO,KC_KP_1, KC_KP_2, KC_KP_3,KC_KP_PLUS,KC_KP_ENTER,
           EPRM,KC_NO,KC_KP_0,KC_KP_DOT,KC_KP_EQUAL,
                                          KC_TRNS,KC_NO,
-                                               KC_NO,
+                                               KC_TRNS,
                           KC_TRANSPARENT,KC_NO,KC_NO,
        // right hand
        KC_F6, KC_F5,   KC_F4,  KC_F3,   KC_F2,   KC_F1,  KC_BSPC,
        KC_NO,KC_PIPE,KC_LCBR,KC_RCBR, KC_SLASH, KC_BSLS, KC_NO,
              KC_GRV,KC_LPRN,KC_RPRN,  KC_SCLN, KC_QUOT, KC_NO,
        KC_NO, KC_TILD,KC_LBRC,KC_RBRC, KC_EQL,  KC_MINUS, KC_NO,
-                         KC_NO,KC_NO,  KC_NO,    KC_NO,  KC_NO,
+                         KC_TRNS,KC_NO,  KC_NO,    KC_NO,  KC_NO,
        KC_NO, KC_TRNS,
-       KC_NO,
+       KC_TRNS,
        KC_NO, KC_NO, KC_TRANSPARENT
 ),
 
@@ -303,22 +307,107 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
 [PLVR] = LAYOUT_ergodox(  // layout: layer 4: Steno for Plover
         // left hand
         KC_NO, KC_NO,  KC_NO,  KC_NO,  KC_NO,  KC_NO,  KC_NO,
-        KC_NO,  KC_1,   KC_2,   KC_3,   KC_4,   KC_5,   KC_TRNS,
-        KC_NO,  KC_Q,   KC_W,   KC_E,   KC_R,   KC_T,
-        KC_NO,  KC_A,   KC_S,   KC_D,   KC_F,   KC_G,   KC_NO,
+        STN_N1, STN_N2, STN_N3, STN_N4, STN_N5, STN_N6, KC_NO,
+        STN_FN, STN_S1, STN_TL, STN_PL, STN_HL, STN_ST1,
+        KC_NO,  STN_S2, STN_KL, STN_WL, STN_RL, STN_ST2,   KC_NO,
         KC_NO,  KC_NO,  KC_NO,  KC_NO,  KC_NO,
-                                      KC_FN4, KC_NO,
-                                           KC_NO,
-                                 KC_C,   KC_V,   KC_NO,
+                                      KC_TRNS, KC_TRNS,
+                                           KC_TRNS,
+                                 STN_A,   STN_O,   KC_NO,
         // right hand
-             KC_TRNS,  KC_NO,   KC_NO,   KC_NO,  KC_NO,   KC_NO,   KC_TRNS,
-             KC_TRNS,   KC_6,    KC_7,    KC_8,   KC_9,    KC_0,   KC_TRNS,
-                        KC_Y,   KC_U,    KC_I,    KC_O,   KC_P,    KC_LBRC,
-               KC_NO,   KC_H,    KC_J,    KC_K,   KC_L, KC_SCLN,   KC_QUOT,
+             KC_TRNS,  KC_NO,   KC_NO,   KC_NO,   KC_NO,   KC_NO,   KC_TRNS,
+             KC_TRNS, STN_N7,  STN_N8,  STN_N9,  STN_NA,  STN_NB,   STN_NC,
+                     STN_ST3,  STN_FR,  STN_PR,  STN_LR,  STN_TR,   STN_DR,
+               KC_NO,STN_ST4,  STN_RR,  STN_BR,  STN_GR,  STN_SR,   STN_ZR,
                               KC_TRNS, KC_TRNS,  KC_NO,   KC_NO,     KC_NO,
         KC_TRNS, KC_TRNS,
         KC_TRNS,
-        KC_NO,  KC_N,   KC_M
+        KC_NO,  STN_E,   STN_U
+),
+/* Keymap 8: shortcuts
+ *
+ * ,--------------------------------------------------.           ,--------------------------------------------------.
+ * |  ESC   |   1  |   2  |   3  |   4  |   5  | LEFT |           | RIGHT|   6  |   7  |   8  |   9  |   0  |  BSPC  |
+ * |--------+------+------+------+------+-------------|           |------+------+------+------+------+------+--------|
+ * | TAB    |   Q  |   W  |   E  |   R  |   T  |  L1  |           |  L1  |   Y  |   U  |   I  |   O  |   P  |   \    |
+ * |--------+------+------+------+------+------|      |           |      |------+------+------+------+------+--------|
+ * | BkSp   |   A  |   S  |   D  |   F  |   G  |------|           |------|   H  |   J  |   K  |   L  |   ;  |ENTER   |
+ * |--------+------+------+------+------+------| -    |           | =    |------+------+------+------+------+--------|
+ * | LShift |   Z  |   X  |   C  |   V  |   B  |      |           |      |   N  |   M  |   ,  |   .  |   /  | RShift |
+ * `--------+------+------+------+------+-------------'           `-------------+------+------+------+------+--------'
+ *   |LCTRL|ALT  |CTLShTab|CTL-TAB|     |                                       |  RGui| UP   | DOWN |  ALT | RCTRL  |
+ *   `----------------------------------'                                       `----------------------------------'
+ *                                        ,-------------.       ,-------------.
+ *                                        | Alt  |Dvorak|       |Plover|Alt   |
+ *                                 ,------|------|------|       |------+--------+------.
+ *                                 |      |      | Home |       | PgUp |        |      |
+ *                                 | Space|DELETE|------|       |------|  Tab   |Enter |
+ *                                 |mirror|      | End  |       | PgDn |        |mirror|
+ *                                 `--------------------'       `----------------------'
+ */
+// If it accepts an argument (i.e, is a function), it doesn't need KC_.
+// Otherwise, it needs KC_*
+[SHORTCUTS] = LAYOUT_ergodox(  // layer 0 : default
+        // left hand
+        KC_ESC,         KC_1,         KC_2,   KC_3,   KC_4,   KC_5,   KC_NO,
+        KC_TAB,   LCTL(KC_Q),   LCTL(KC_W),LCTL(KC_E),LCTL(KC_R),LCTL(KC_T),   KC_NO,
+        KC_BSPC,  LCTL(KC_A),   LCTL(KC_S),LCTL(KC_D),LCTL(KC_F),LCTL(KC_G),
+        KC_LSFT,  LCTL(KC_Z),  	LCTL(KC_X),LCTL(KC_C),LCTL(KC_V),LCTL(KC_B),   KC_MINUS,
+        KC_LCTRL, 		KC_LALT,	  LCTL(LSFT(KC_TAB)),LCTL(KC_TAB),  KC_TRANSPARENT,
+                                              KC_NO,  KC_NO,
+
+                                                              KC_NO,
+                                         KC_NO,KC_NO,KC_NO,
+        // right hand
+             KC_RGHT,     KC_6,   KC_7,  KC_8,   KC_9,   KC_0,             KC_BSPC,
+             TG(SYMB),    KC_Y,   KC_U,  KC_I,   KC_O,   KC_P,             KC_BSLS,
+                          KC_H,   KC_J,  KC_K,   KC_L,   KC_SCLN,		   KC_ENT,
+             KC_EQL,KC_N,   KC_M,  KC_COMM,KC_DOT, KC_SLASH,   	   KC_RSFT,
+                                  KC_TRNS, KC_UP,KC_DOWN,KC_RALT,           KC_RCTRL,
+             KC_NO,        KC_TRNS,
+             KC_NO,
+             KC_NO,KC_NO, KC_NO
+    ),
+    /* Keymap 2: Media and mouse keys
+ *
+ * ,--------------------------------------------------.           ,--------------------------------------------------.
+ * |        |      |      |      |      |      |      |           |      |      |      |      |      |      |        |
+ * |--------+------+------+------+------+-------------|           |------+------+------+------+------+------+--------|
+ * |        |      |LClick| MsUp |RClick|      |      |           |      |      |LClick| MsUp |RClick|      |        |
+ * |--------+------+------+------+------+------|      |           |      |------+------+------+------+------+--------|
+ * |        |      |MsLeft|MsDown|MsRght|      |------|           |------|      |MsLeft|MsDown|MsRght|      |        |
+ * |--------+------+------+------+------+------|      |           |      |------+------+------+------+------+--------|
+ * |        |      |      |      |      |      |      |           |      |      |      |      |      |      |        |
+ * `--------+------+------+------+------+-------------'           `-------------+------+------+------+------+--------'
+ *   |      |      |      |      |      |                                       |      |      |      |      |      |
+ *   `----------------------------------'                                       `----------------------------------'
+ *                                        ,-------------.       ,-------------.
+ *                                        |      |      |       |      |      |
+ *                                 ,------|------|------|       |------+------+------.
+ *                                 |      |      |      |       |      |      |      |
+ *                                 |      |      |------|       |------|      |      |
+ *                                 |      |      |      |       |      |      |      |
+ *                                 `--------------------'       `--------------------'
+ */
+// MEDIA AND MOUSE
+[MDIA] = LAYOUT_ergodox(
+       KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+       KC_TRNS, KC_TRNS, KC_BTN1, KC_MS_U, KC_BTN2, KC_TRNS, KC_WH_U,
+       KC_TRNS, KC_TRNS, KC_MS_L, KC_MS_D, KC_MS_R, KC_TRNS,
+       KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_WH_D,
+       KC_TRNS, KC_TRNS, KC_TRNS, KC_BTN1, KC_BTN2,
+                                           KC_TRNS, KC_TRNS,
+                                                    KC_TRNS,
+                                  KC_WH_L, KC_WH_R, KC_TRNS,
+    // right hand
+       KC_TRNS,  KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+       KC_WH_U,  KC_TRNS, KC_BTN1, KC_MS_U, KC_BTN2, KC_TRNS, KC_TRNS,
+                 KC_TRNS, KC_MS_L, KC_MS_D, KC_MS_R, KC_TRNS, KC_TRNS,
+       KC_WH_D,  KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+                          KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+       KC_TRNS, KC_TRNS,
+       KC_TRNS,
+       KC_TRNS, KC_WH_L, KC_WH_R
 ),
 /* Keymap 8: shortcuts
  *
@@ -418,7 +507,7 @@ bool process_record_user(uint16_t keycode, keyrecord_t *record) {
 
 // Runs just one time when the keyboard initializes.
 void matrix_init_user(void) {
-
+  steno_set_mode(STENO_MODE_GEMINI); // or STENO_MODE_BOLT
 };
 
 

keyboards/ergodox_infinity/keymaps/halfkeyboard/rules.mk

@@ -0,0 +1,91 @@
+# project specific files
+SRC =	matrix.c \
+	led.c
+
+## chip/board settings
+# - the next two should match the directories in
+#   <chibios>/os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES)
+# - For Teensies, FAMILY = KINETIS and SERIES is either
+#   KL2x (LC) or K20x (3.0,3.1,3.2).
+# - For Infinity KB, SERIES = K20x
+MCU_FAMILY = KINETIS
+MCU_SERIES = K20x
+
+# Linker script to use
+# - it should exist either in <chibios>/os/common/ports/ARMCMx/compilers/GCC/ld/
+#   or <this_dir>/ld/
+# - NOTE: a custom ld script is needed for EEPROM on Teensy LC
+# - LDSCRIPT =
+#   - MKL26Z64 for Teensy LC
+#   - MK20DX128 for Teensy 3.0
+#   - MK20DX256 for Teensy 3.1 and 3.2
+#   - MK20DX128BLDR4 for Infinity 60% with Kiibohd bootloader
+#   - MK20DX256BLDR8 for Infinity ErgoDox with Kiibohd bootloader
+MCU_LDSCRIPT = MK20DX256BLDR8
+
+# Startup code to use
+#  - it should exist in <chibios>/os/common/ports/ARMCMx/compilers/GCC/mk/
+# - STARTUP =
+#   - kl2x for Teensy LC
+#   - k20x5 for Teensy 3.0 and Infinity 60%
+#   - k20x7 for Teensy 3.1, 3.2 and Infinity ErgoDox
+MCU_STARTUP = k20x7
+
+# Board: it should exist either in <chibios>/os/hal/boards/
+#  or <this_dir>/boards
+# - BOARD =
+#   - PJRC_TEENSY_LC for Teensy LC
+#   - PJRC_TEENSY_3 for Teensy 3.0
+#   - PJRC_TEENSY_3_1 for Teensy 3.1 or 3.2
+#   - MCHCK_K20 for Infinity KB
+#BOARD = MCHCK_K20
+BOARD = PJRC_TEENSY_3_1
+
+# Cortex version
+# Teensy LC is cortex-m0; Teensy 3.x are cortex-m4
+MCU  = cortex-m4
+
+# ARM version, CORTEX-M0/M1 are 6, CORTEX-M3/M4/M7 are 7
+# I.e. 6 for Teensy LC; 7 for Teensy 3.x
+ARMV = 7
+
+# Vector table for application
+# 0x00000000-0x00001000 area is occupied by bootlaoder.*/
+# The CORTEX_VTOR... is needed only for MCHCK/Infinity KB
+OPT_DEFS += -DCORTEX_VTOR_INIT=0x00002000
+
+# Build Options
+#   comment out to disable the options.
+#
+
+BOOTMAGIC_ENABLE = no  # Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE  = yes # Mouse keys(+4700)
+EXTRAKEY_ENABLE  = yes # Audio control and System control(+450)
+CONSOLE_ENABLE   = no  # Console for debug(+400)
+COMMAND_ENABLE   = yes # Commands for debug and configuration
+CUSTOM_MATRIX    = yes # Custom matrix file for the ErgoDox EZ
+SLEEP_LED_ENABLE = yes # Breathing sleep LED during USB suspend
+NKRO_ENABLE      = yes # USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+UNICODE_ENABLE   = yes # Unicode
+ONEHAND_ENABLE   = yes # Allow swapping hands of keyboard
+STENO_ENABLE = yes  #enable plover steno mode
+CUSTOM_MATRIX = yes # Custom matrix file
+SERIAL_LINK_ENABLE = yes
+VISUALIZER_ENABLE = yes
+LCD_ENABLE = yes
+BACKLIGHT_ENABLE = yes
+LCD_BACKLIGHT_ENABLE = yes
+MIDI_ENABLE = yes
+MIDI_ADVANCED = yes
+MUSIC_MODE = yes
+RGBLIGHT_ENABLE = no
+
+LCD_DRIVER = st7565
+LCD_WIDTH = 128
+LCD_HEIGHT = 32
+
+LED_DRIVER = is31fl3731c
+LED_WIDTH = 7
+LED_HEIGHT = 7
+
+LAYOUTS = ergodox

keyboards/ergodox_infinity/keymaps/halfkeyboard/visualizer.c

@@ -12,7 +12,140 @@ You should have received a copy of the GNU General Public License
 along with this program.  If not, see <http://www.gnu.org/licenses/>.
 */
 
-#include "simple_visualizer.h"
+#include "visualizer.h"
+#include "gfx.h"
+#include "math.h"
+#include "default_animations.h"
+#include "led_backlight_keyframes.h"
+
+#define ONESIDESCAN 9
+#define BOTHSIDESCAN 16
+#define FULL_ON LUMA2COLOR(255)
+#define THREE_QUARTER LUMA2COLOR(200)
+#define HALF_ON LUMA2COLOR(150)
+#define ONE_QUARTER LUMA2COLOR(50)
+#define CROSSFADE_TIME 8000
+bool KITT_scan_one_side_left_to_right(keyframe_animation_t* animation, visualizer_state_t* state);
+bool KITT_scan_one_side_right_to_left(keyframe_animation_t* animation, visualizer_state_t* state);
+keyframe_animation_t Fade_in_all_leds = {
+    .num_frames = 1,
+    .loop = false,
+    .frame_lengths = {
+        CROSSFADE_TIME,
+    },
+    .frame_functions = {
+        led_backlight_keyframe_fade_in_all,
+    },
+};
+/*
+ *  one set left to right.  then reverse to go back.
+ *  |    left side              |       right side          |       |
+    |---|---|---|---|---|---|---|:-:|---|---|---|---|---|---|-------|
+    | 0 | 1 | 2 | 3 | 4 | 5 | 6 | 6 | 5 | 4 | 3 | 2 | 1 | 0 | phase |
+    _________________________________________________________________
+    | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0     |
+    | 3 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 1     |
+    | 2 | 3 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 2     |
+    | 1 | 2 | 3 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 3     |
+    | 0 | 1 | 2 | 3 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 4     |
+    | 0 | 0 | 1 | 2 | 3 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 5     |
+    | 0 | 0 | 0 | 1 | 2 | 3 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 6     |
+    | 0 | 0 | 0 | 0 | 1 | 2 | 3 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 7     |
+    | 0 | 0 | 0 | 0 | 0 | 1 | 2 | 3 | 0 | 0 | 0 | 0 | 0 | 0 | 8     |
+    | 0 | 0 | 0 | 0 | 0 | 0 | 1 | 2 | 3 | 0 | 0 | 0 | 0 | 0 | 9     |
+    | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 1 | 2 | 3 | 0 | 0 | 0 | 0 | 10    |
+    | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 1 | 2 | 3 | 0 | 0 | 0 | 11    |
+    | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 1 | 2 | 3 | 0 | 0 | 12    |
+    | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 1 | 2 | 3 | 0 | 13    |
+    | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 1 | 2 | 3 | 14    |
+    | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 1 | 2 | 15    |
+    | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 1 | 16    |
+  */
+
+#ifdef MASTER_IS_ON_RIGHT /*right side*/
+
+keyframe_animation_t KITT_Scanner_animation = {
+    .num_frames = 2,
+    .loop = true,
+    .frame_lengths = {
+        CROSSFADE_TIME * BOTHSIDESCAN,
+        CROSSFADE_TIME * BOTHSIDESCAN,
+    },
+    .frame_functions = {
+        KITT_scan_one_side_left_to_right,
+        KITT_scan_one_side_right_to_left,
+    },
+};
+
+bool KITT_scan_one_side_left_to_right(keyframe_animation_t* animation, visualizer_state_t* state) {
+    (void)state;
+    float frame_length = animation->frame_lengths[animation->current_frame];
+    float current_pos = frame_length - animation->time_left_in_frame;
+    int phase = current_pos/(frame_length/BOTHSIDESCAN);
+    int row = 0;
+    gdispGClear(LED_DISPLAY, ONE_QUARTER);
+    gdispGDrawPixel(LED_DISPLAY, 14-phase, row, FULL_ON);
+    gdispGDrawPixel(LED_DISPLAY, 15-phase, row, THREE_QUARTER);
+    gdispGDrawPixel(LED_DISPLAY, 16-phase, row, HALF_ON);
+    gdispGDrawPixel(LED_DISPLAY, 6, row, ONE_QUARTER);
+    return true;
+}
+
+bool KITT_scan_one_side_right_to_left(keyframe_animation_t* animation, visualizer_state_t* state) {
+    (void)state;
+    float frame_length = animation->frame_lengths[animation->current_frame];
+    float current_pos = frame_length - animation->time_left_in_frame;
+    int phase = current_pos/(frame_length/BOTHSIDESCAN);
+    int row = 0;
+    gdispGClear(LED_DISPLAY, ONE_QUARTER);
+    gdispGDrawPixel(LED_DISPLAY, phase, row, FULL_ON);
+    gdispGDrawPixel(LED_DISPLAY, phase-1, row, THREE_QUARTER);
+    gdispGDrawPixel(LED_DISPLAY, phase-2, row, HALF_ON);
+    gdispGDrawPixel(LED_DISPLAY, 6, row, ONE_QUARTER);
+    return true;
+}
+#else /*left side*/
+keyframe_animation_t KITT_Scanner_animation = {
+    .num_frames = 2,
+    .loop = true,
+    .frame_lengths = {
+        CROSSFADE_TIME * BOTHSIDESCAN,
+        CROSSFADE_TIME * BOTHSIDESCAN,
+    },
+    .frame_functions = {
+        KITT_scan_one_side_left_to_right,
+        KITT_scan_one_side_right_to_left,
+    },
+};
+
+bool KITT_scan_one_side_left_to_right(keyframe_animation_t* animation, visualizer_state_t* state) {
+    (void)state;
+    float frame_length = animation->frame_lengths[animation->current_frame];
+    float current_pos = frame_length - animation->time_left_in_frame;
+    int phase = current_pos/(frame_length/BOTHSIDESCAN);
+    int row = 0;
+    gdispGClear(LED_DISPLAY, ONE_QUARTER);
+    gdispGDrawPixel(LED_DISPLAY, phase, row, FULL_ON);
+    gdispGDrawPixel(LED_DISPLAY, phase-1, row, THREE_QUARTER);
+    gdispGDrawPixel(LED_DISPLAY, phase-2, row, HALF_ON);
+    gdispGDrawPixel(LED_DISPLAY, 6, row, ONE_QUARTER);
+    return true;
+}
+
+bool KITT_scan_one_side_right_to_left(keyframe_animation_t* animation, visualizer_state_t* state) {
+    (void)state;
+    float frame_length = animation->frame_lengths[animation->current_frame];
+    float current_pos = frame_length - animation->time_left_in_frame;
+    int phase = current_pos/(frame_length/BOTHSIDESCAN);
+    int row = 0;
+    gdispGClear(LED_DISPLAY, ONE_QUARTER);
+    gdispGDrawPixel(LED_DISPLAY, (14 - phase), row, FULL_ON);
+    gdispGDrawPixel(LED_DISPLAY, 14 - (phase-1), row, THREE_QUARTER);
+    gdispGDrawPixel(LED_DISPLAY, 14 - (phase-2), row, HALF_ON);
+    gdispGDrawPixel(LED_DISPLAY, 6, row, ONE_QUARTER);
+    return true;
+}
+#endif
 
 #define RED 0
 #define ORANGE 21
@@ -37,13 +170,19 @@ static void get_visualizer_layer_and_color(visualizer_state_t* state) {
     /* if (state->status.leds & (1u << USB_LED_CAPS_LOCK)) {
         saturation = 255;
     } */
-    if (state->status.layer & 0x100) {
+    if (state->status.layer & 0x200) {
+        state->target_lcd_color = LCD_COLOR(GREEN, saturation, 0xFF);
+        state->layer_text = "MOUSE";
+    }
+    else if (state->status.layer & 0x100) {
         state->target_lcd_color = LCD_COLOR(MAGENTA, saturation, 0xFF);
         state->layer_text = "Shortcuts Layer";
     }
     else    if (state->status.layer & 0x80) {
         state->target_lcd_color = LCD_COLOR(VIOLET, saturation, 0xFF);
         state->layer_text = "Plover";
+        start_keyframe_animation(&KITT_Scanner_animation);
+
     }
     else if (state->status.layer & 0x40) {
         state->target_lcd_color = LCD_COLOR(RASPBERRY, saturation, 0xFF);
@@ -68,5 +207,7 @@ static void get_visualizer_layer_and_color(visualizer_state_t* state) {
     else {
         state->target_lcd_color = LCD_COLOR(YELLOW, saturation, 0xFF);
         state->layer_text = "Qwerty";
+        stop_keyframe_animation(&KITT_Scanner_animation);
+        start_keyframe_animation(&Fade_in_all_leds);
     }
-}
+}

keyboards/ergodox_infinity/keymaps/halfkeyboard/visualizer.h

@@ -0,0 +1,125 @@
+/* Copyright 2017 Fred Sundvik
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#ifndef VISUALIZER_H_
+#define VISUALIZER_H_
+
+// Currently we are assuming that both the backlight and LCD are enabled
+// But it's entirely possible to write a custom visualizer that use only
+// one of them
+#ifndef LCD_BACKLIGHT_ENABLE
+#error This visualizer needs that LCD backlight is enabled
+#endif
+
+#ifndef LCD_ENABLE
+#error This visualizer needs that LCD is enabled
+#endif
+
+#include "visualizer.h"
+#include "visualizer_keyframes.h"
+#include "lcd_keyframes.h"
+#include "lcd_backlight_keyframes.h"
+#include "system/serial_link.h"
+#include "led.h"
+#include "default_animations.h"
+
+static const uint32_t logo_background_color = LCD_COLOR(0x00, 0x00, 0xFF);
+static const uint32_t initial_color = LCD_COLOR(0, 0, 0);
+
+static bool initial_update = true;
+
+// Feel free to modify the animations below, or even add new ones if needed
+extern keyframe_animation_t KITT_Scanner_animation;
+
+static keyframe_animation_t lcd_layer_display = {
+    .num_frames = 1,
+    .loop = false,
+    .frame_lengths = {gfxMillisecondsToTicks(0)},
+    .frame_functions = {lcd_keyframe_display_layer_and_led_states}
+};
+
+// The color animation animates the LCD color when you change layers
+static keyframe_animation_t color_animation = {
+    .num_frames = 2,
+    .loop = false,
+    // Note that there's a 200 ms no-operation frame,
+    // this prevents the color from changing when activating the layer
+    // momentarily
+    .frame_lengths = {gfxMillisecondsToTicks(200), gfxMillisecondsToTicks(500)},
+    .frame_functions = {keyframe_no_operation, lcd_backlight_keyframe_animate_color},
+};
+
+void initialize_user_visualizer(visualizer_state_t* state) {
+    // The brightness will be dynamically adjustable in the future
+    // But for now, change it here.
+    lcd_backlight_brightness(130);
+    state->current_lcd_color = initial_color;
+    state->target_lcd_color = logo_background_color;
+    initial_update = true;
+    start_keyframe_animation(&default_startup_animation);
+}
+
+
+// This function should be implemented by the keymap visualizer
+// Don't change anything else than state->target_lcd_color and state->layer_text as that's the only thing
+// that the simple_visualizer assumes that you are updating
+// Also make sure that the buffer passed to state->layer_text remains valid until the previous animation is
+// stopped. This can be done by either double buffering it or by using constant strings
+static void get_visualizer_layer_and_color(visualizer_state_t* state);
+
+void update_user_visualizer_state(visualizer_state_t* state, visualizer_keyboard_status_t* prev_status) {
+    // Add more tests, change the colors and layer texts here
+    // Usually you want to check the high bits (higher layers first)
+    // because that's the order layers are processed for keypresses
+    // You can for check for example:
+    // state->status.layer
+    // state->status.default_layer
+    // state->status.leds (see led.h for available statuses)
+
+    uint32_t prev_color = state->target_lcd_color;
+    const char* prev_layer_text = state->layer_text;
+
+    get_visualizer_layer_and_color(state);
+
+    if (initial_update || prev_color != state->target_lcd_color) {
+        start_keyframe_animation(&color_animation);
+    }
+
+    if (initial_update || prev_layer_text != state->layer_text) {
+        start_keyframe_animation(&lcd_layer_display);
+    }
+    // You can also stop existing animations, and start your custom ones here
+    // remember that you should normally have only one animation for the LCD
+    // and one for the background. But you can also combine them if you want.
+
+}
+
+void user_visualizer_suspend(visualizer_state_t* state) {
+    state->layer_text = "Suspending...";
+    uint8_t hue = LCD_HUE(state->current_lcd_color);
+    uint8_t sat = LCD_SAT(state->current_lcd_color);
+    state->target_lcd_color = LCD_COLOR(hue, sat, 0);
+    start_keyframe_animation(&default_suspend_animation);
+}
+
+void user_visualizer_resume(visualizer_state_t* state) {
+    state->current_lcd_color = initial_color;
+    state->target_lcd_color = logo_background_color;
+    initial_update = true;
+    start_keyframe_animation(&default_startup_animation);
+}
+
+#endif /* VISUALIZER_H_ */

keyboards/helix/rev1/split_util.h

@@ -2,11 +2,7 @@
 #define SPLIT_KEYBOARD_UTIL_H
 
 #include <stdbool.h>
-
-#ifdef EE_HANDS
-	#define EECONFIG_BOOTMAGIC_END      (uint8_t *)10
-	#define EECONFIG_HANDEDNESS         EECONFIG_BOOTMAGIC_END
-#endif
+#include "eeconfig.h"
 
 #define SLAVE_I2C_ADDRESS           0x32
 

keyboards/helix/rev2/split_util.h

@@ -2,11 +2,7 @@
 #define SPLIT_KEYBOARD_UTIL_H
 
 #include <stdbool.h>
-
-#ifdef EE_HANDS
-	#define EECONFIG_BOOTMAGIC_END      (uint8_t *)10
-	#define EECONFIG_HANDEDNESS         EECONFIG_BOOTMAGIC_END
-#endif
+#include "eeconfig.h"
 
 #define SLAVE_I2C_ADDRESS           0x32
 

keyboards/iris/info.json

@@ -0,0 +1,16 @@
+{
+    "keyboard_name": "Iris", 
+    "manufacturer": "Keebio", 
+    "identifier": "0x1256", 
+    "url": "Keeb.io", 
+    "maintainer": "qmk", 
+    "processor": "atmega32u4", 
+    "bootloader": "", 
+    "width": 14.5, 
+    "height": 5, 
+    "layouts": {
+        "KEYMAP": {
+            "layout": [{"x":0, "y":0}, {"x":1, "y":0}, {"x":2, "y":0}, {"x":3, "y":0}, {"x":4, "y":0}, {"x":5, "y":0}, {"x":8.5, "y":0}, {"x":9.5, "y":0}, {"x":10.5, "y":0}, {"x":11.5, "y":0}, {"x":12.5, "y":0}, {"x":13.5, "y":0}, {"x":0, "y":1}, {"x":1, "y":1}, {"x":2, "y":1}, {"x":3, "y":1}, {"x":4, "y":1}, {"x":5, "y":1}, {"x":8.5, "y":1}, {"x":9.5, "y":1}, {"x":10.5, "y":1}, {"x":11.5, "y":1}, {"x":12.5, "y":1}, {"x":13.5, "y":1}, {"x":0, "y":2}, {"x":1, "y":2}, {"x":2, "y":2}, {"x":3, "y":2}, {"x":4, "y":2}, {"x":5, "y":2}, {"x":8.5, "y":2}, {"x":9.5, "y":2}, {"x":10.5, "y":2}, {"x":11.5, "y":2}, {"x":12.5, "y":2}, {"x":13.5, "y":2}, {"x":0, "y":3}, {"x":1, "y":3}, {"x":2, "y":3}, {"x":3, "y":3}, {"x":4, "y":3}, {"x":5, "y":3}, {"x":6, "y":3}, {"x":7.5, "y":3}, {"x":8.5, "y":3}, {"x":9.5, "y":3}, {"x":10.5, "y":3}, {"x":11.5, "y":3}, {"x":12.5, "y":3}, {"x":13.5, "y":3}, {"x":4, "y":4}, {"x":5, "y":4}, {"x":6, "y":4}, {"x":7.5, "y":4}, {"x":8.5, "y":4}, {"x":9.5, "y":4}]
+        }
+    }
+}

keyboards/iris/keymaps/yanfali/config.h

@@ -0,0 +1,43 @@
+/*
+Copyright 2017 Danny Nguyen <danny@hexwire.com>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#ifndef CONFIG_USER_H
+#define CONFIG_USER_H
+
+#include "config_common.h"
+
+/* Use I2C or Serial, not both */
+
+#define USE_SERIAL
+// #define USE_I2C
+
+/* Select hand configuration */
+
+#define MASTER_LEFT
+// #define MASTER_RIGHT
+// #define EE_HANDS
+
+#define TAPPING_TERM 150
+
+#undef RGBLED_NUM
+#define RGBLIGHT_ANIMATIONS
+#define RGBLED_NUM 12
+#define RGBLIGHT_HUE_STEP 8
+#define RGBLIGHT_SAT_STEP 8
+#define RGBLIGHT_VAL_STEP 8
+
+#endif

keyboards/iris/keymaps/yanfali/keymap.c

@@ -0,0 +1,145 @@
+#include "iris.h"
+#include "action_layer.h"
+#include "eeconfig.h"
+
+extern keymap_config_t keymap_config;
+
+#define _QWERTY 0
+#define _LOWER 1
+#define _RAISE 2
+#define _ADJUST 16
+
+enum custom_keycodes {
+  QWERTY = SAFE_RANGE,
+  LOWER,
+  RAISE,
+  ADJUST,
+};
+
+#define KC_ KC_TRNS
+#define _______ KC_TRNS
+
+#define KC_CAPW LGUI(LSFT(KC_3))        // Capture whole screen
+#define KC_CPYW LGUI(LSFT(LCTL(KC_3)))  // Copy whole screen
+#define KC_CAPP LGUI(LSFT(KC_4))        // Capture portion of screen
+#define KC_CPYP LGUI(LSFT(LCTL(KC_4)))  // Copy portion of screen
+#define KC_ESCC MT(MOD_LCTL, KC_ESC)    // Control (hold), Escape (tap)
+#define KC_BACK LGUI(KC_LEFT)           // Browser Back
+#define KC_FORW LGUI(KC_RIGHT)          // Browser Forward
+#define KC_LOWR LOWER
+#define KC_RASE RAISE
+#define KC_RST RESET
+#define KC_BL_S BL_STEP
+#define KC_ENTS MT(MOD_LSFT, KC_ENT)
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+
+  [_QWERTY] = KC_KEYMAP(
+  //,----+----+----+----+----+----.              ,----+----+----+----+----+----.
+     GRV , 1  , 2  , 3  , 4  , 5  ,                6  , 7  , 8  , 9  , 0  ,MINS,
+  //|----+----+----+----+----+----|              |----+----+----+----+----+----|
+     TAB , Q  , W  , E  , R  , T  ,                Y  , U  , I  , O  , P  ,PLUS,
+  //|----+----+----+----+----+----|              |----+----+----+----+----+----|
+     ESCC, A  , S  , D  , F  , G  ,                H  , J  , K  , L  ,SCLN,QUOT,
+  //|----+----+----+----+----+----+----.    ,----|----+----+----+----+----+----|
+     LSFT, Z  , X  , C  , V  , B  ,SPC ,     LALT, N  , M  ,COMM,DOT ,SLSH,DEL ,
+  //`----+----+----+--+-+----+----+----/    \----+----+----+----+----+----+----'
+                       LGUI,LOWR,SPC ,         BSPC,ENTS,RASE
+  //                  `----+----+----'        `----+----+----'
+  ),
+
+  [_LOWER] = KC_KEYMAP(
+  //,----+----+----+----+----+----.              ,----+----+----+----+----+----.
+     TILD,EXLM, AT ,HASH,DLR ,PERC,               CIRC,AMPR,ASTR,LPRN,RPRN,BSPC,
+  //|----+----+----+----+----+----|              |----+----+----+----+----+----|
+     RST , 1  , 2  , 3  , 4  , 5  ,                6  , 7  , 8  , 9  , 0  ,    ,
+  //|----+----+----+----+----+----|              |----+----+----+----+----+----|
+     DEL ,CAPP,LEFT,RGHT, UP ,LBRC,               RBRC, P4 , P5 , P6 ,PLUS,PIPE,
+  //|----+----+----+----+----+----+----.    ,----|----+----+----+----+----+----|
+     BL_S,CPYP,    ,    ,DOWN,LCBR,LPRN,     RPRN,RCBR, P1 , P2 , P3 ,MINS,    ,
+  //`----+----+----+--+-+----+----+----/    \----+----+----+----+----+----+----'
+                           ,    ,DEL ,         DEL ,    , P0
+  //                  `----+----+----'        `----+----+----'
+  ),
+
+  [_RAISE] = KC_KEYMAP(
+  //,----+----+----+----+----+----.              ,----+----+----+----+----+----.
+     F12 , F1 , F2 , F3 , F4 , F5 ,                F6 , F7 , F8 , F9 ,F10 ,F11 ,
+  //|----+----+----+----+----+----|              |----+----+----+----+----+----|
+         ,EXLM, AT ,HASH,DLR ,PERC,               CIRC,AMPR,ASTR,LPRN,RPRN,    ,
+  //|----+----+----+----+----+----|              |----+----+----+----+----+----|
+     DEL ,MPRV,BACK,FORW,PGUP,UNDS,               EQL ,HOME,    ,    ,    ,BSLS,
+  //|----+----+----+----+----+----+----.    ,----|----+----+----+----+----+----|
+     MUTE,MSTP,MPLY,VOLD,PGDN,MINS,    ,         ,PLUS,END ,    ,    ,    ,    ,
+  //`----+----+----+--+-+----+----+----/    \----+----+----+----+----+----+----'
+                           ,    ,    ,             ,    ,
+  //                  `----+----+----'        `----+----+----'
+  ),
+
+  [_ADJUST] = KEYMAP(
+  //,--------+--------+--------+--------+--------+--------.                          ,--------+--------+--------+--------+--------+--------.
+      _______, _______, _______, _______, _______, _______,                            _______, _______, _______, _______, _______, _______,
+  //|--------+--------+--------+--------+--------+--------|                          |--------+--------+--------+--------+--------+--------|
+      RGB_TOG, RGB_MOD, RGB_HUI, RGB_SAI, RGB_VAI, _______,                            _______, _______, _______, _______, _______, _______,
+  //|--------+--------+--------+--------+--------+--------|                          |--------+--------+--------+--------+--------+--------|
+      RESET  , DEBUG  , RGB_HUD, RGB_SAD, RGB_VAD, _______,                            _______, _______, _______, _______, _______, _______,
+  //|--------+--------+--------+--------+--------+--------+--------.        ,--------|--------+--------+--------+--------+--------+--------|
+      _______, _______, _______, _______, _______, _______, _______,          _______, _______, _______, _______, _______, _______, _______,
+  //`--------+--------+--------+----+---+--------+--------+--------/        \--------+--------+--------+---+----+--------+--------+--------'
+                                      _______, _______, _______,                  _______, _______, _______
+  //                                `--------+--------+--------'                `--------+--------+--------'
+  )
+
+};
+
+#ifdef AUDIO_ENABLE
+float tone_qwerty[][2]     = SONG(QWERTY_SOUND);
+#endif
+
+void persistent_default_layer_set(uint16_t default_layer) {
+  eeconfig_update_default_layer(default_layer);
+  default_layer_set(default_layer);
+}
+
+bool process_record_user(uint16_t keycode, keyrecord_t *record) {
+  switch (keycode) {
+    case QWERTY:
+      if (record->event.pressed) {
+        #ifdef AUDIO_ENABLE
+          PLAY_SONG(tone_qwerty);
+        #endif
+        persistent_default_layer_set(1UL<<_QWERTY);
+      }
+      return false;
+      break;
+    case LOWER:
+      if (record->event.pressed) {
+        layer_on(_LOWER);
+        update_tri_layer(_LOWER, _RAISE, _ADJUST);
+      } else {
+        layer_off(_LOWER);
+        update_tri_layer(_LOWER, _RAISE, _ADJUST);
+      }
+      return false;
+      break;
+    case RAISE:
+      if (record->event.pressed) {
+        layer_on(_RAISE);
+        update_tri_layer(_LOWER, _RAISE, _ADJUST);
+      } else {
+        layer_off(_RAISE);
+        update_tri_layer(_LOWER, _RAISE, _ADJUST);
+      }
+      return false;
+      break;
+    case ADJUST:
+      if (record->event.pressed) {
+        layer_on(_ADJUST);
+      } else {
+        layer_off(_ADJUST);
+      }
+      return false;
+      break;
+  }
+  return true;
+}

keyboards/iris/keymaps/yanfali/readme.md

@@ -0,0 +1,17 @@
+## u/yanfali keymap for Iris
+
+Based heavily off Hexwire's configuration. Differs in following ways:
+
+ 1. Moved LALT to LCTL; I don't need CTL because of ESCC.
+ 1. Moved RAISE to old LALT.
+ 1. Moved ENTER to old RAISE.
+ 1. Move QUOTE to old ENTER.
+ 1. Moved PLUS to old QUOTE.
+ 1. replaced music next and volume up with browser forward and back
+    through history
+
+This configuration lets me use my thumbs for enter and backspace.
+It turns out I need `+` a lot for programming so I moved it logically
+below `-`.  I also added a couple of web specific short cuts for
+navigating previous and next in web history on OSX Chrome.
+

keyboards/iris/keymaps/yanfali/rules.mk

@@ -1,4 +1,5 @@
 RGBLIGHT_ENABLE = yes
+BACKLIGHT_ENABLE = yes
 
 ifndef QUANTUM_DIR
 	include ../../../../Makefile

keyboards/jc65/readme.md

@@ -1,7 +1,8 @@
 JC65
 ===
 
-![JC65](https://imgur.com/a/C2oa5)
+![JC65 with 32u4](https://i.imgur.com/I4hCyBI.jpg)
+![JC65 with 32a](https://i.imgur.com/9cJ9UbX.jpg)
 
 The JC65 PCB actually has two revisions: A QMK native version, and a PS2AVRGB version. Jchan offered both PCBs as options during the M65-A Round 1 group buy and are now currently available on [keyclack.com](https://keyclack.com/)
 
@@ -11,4 +12,4 @@ Make example native QMK version (after setting up your build environment):
 
 Make example ps2avrGB version (after setting up your build environment):
 
-    make jc65/v32a:default
+    make jc65/v32a:default

keyboards/jc65/v32a/keymaps/naut/keymap.c

@@ -9,11 +9,14 @@
 // Define Macros
 #define M_PRTS  M(0)
 #define M_PRTA  M(1)
-#define M_MSSN  M(2)
-#define M_APPS  M(3)
-#define M_SPOT  M(4)
-#define M_LEFT  M(5)
-#define M_RGHT  M(6)
+#define M_PRTSC M(2)
+#define M_PRTAC M(3)
+#define M_MSSN  M(4)
+#define M_APPS  M(5)
+#define M_SPOT  M(6)
+#define M_LEFT  M(7)
+#define M_RGHT  M(8)
+#define RGB_WHT M(9)
 
 const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
     // Base Layer
@@ -35,15 +38,15 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
     // Mac Layer
     [_MAC] = KEYMAP(
           TO(0), KC_F14, KC_F15, M_APPS, M_MSSN, KC_F11, KC_F12,KC_MRWD,KC_MPLY,KC_MFFD,KC_MUTE,KC_VOLD,KC_VOLU,KC_EJCT,  KC_NO,  KC_NO,
-        KC_TRNS, M_PRTS, M_PRTA,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,        KC_TRNS,KC_TRNS,
-        KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,        KC_TRNS,KC_TRNS,
-        KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,          TO(0), M_MSSN,KC_TRNS,
-        KC_TRNS,KC_TRNS,KC_TRNS,         M_SPOT, M_SPOT, M_SPOT,                        KC_TRNS,KC_TRNS,KC_TRNS, M_LEFT, M_APPS, M_RGHT
+          KC_NO, M_PRTS, M_PRTA,  KC_NO,  KC_NO,  KC_NO,  KC_NO,  KC_NO,  KC_NO,  KC_NO,  KC_NO,  KC_NO,  KC_NO,        KC_BSPC,  KC_NO,
+          KC_NO,M_PRTSC,M_PRTAC,  KC_NO,  KC_NO,  KC_NO,  KC_NO,  KC_NO,  KC_NO,  KC_NO,  KC_NO,  KC_NO,  KC_NO,         KC_ENT,  KC_NO,
+          KC_NO,  KC_NO,  KC_NO,   KC_X,   KC_C,   KC_V,  KC_NO,  KC_NO,  KC_NO,  KC_NO,  KC_NO,  KC_NO,          TO(0), M_MSSN,  KC_NO,
+          KC_NO,  KC_NO,KC_LGUI,         M_SPOT, M_SPOT, M_SPOT,                        KC_RGUI,  KC_NO,  KC_NO, M_LEFT, M_APPS, M_RGHT
     ),
     // RGB and BL Layer
     [_RGB] = KEYMAP(
           TO(0),  KC_NO,  KC_NO,  KC_NO,  KC_NO,  KC_NO,  KC_NO,  KC_NO,  KC_NO,  KC_NO,  KC_NO,  KC_NO,  KC_NO,  KC_NO,  KC_NO,  TO(0),
-          KC_NO,RGB_HUD,RGB_HUI,  KC_NO,  KC_NO,  KC_NO,  KC_NO,  KC_NO,  KC_NO,  KC_NO,  KC_NO,  KC_NO,  KC_NO,          KC_NO,BL_TOGG,
+          KC_NO,RGB_HUD,RGB_HUI,RGB_WHT,  KC_NO,  KC_NO,  KC_NO,  KC_NO,  KC_NO,  KC_NO,  KC_NO,  KC_NO,  KC_NO,          KC_NO,BL_TOGG,
           KC_NO,RGB_SAD,RGB_SAI,  KC_NO,  KC_NO,  KC_NO,  KC_NO,  KC_NO,  KC_NO,  KC_NO,  KC_NO,  KC_NO,  KC_NO,          KC_NO,RGB_TOG,
           KC_NO,  KC_NO,RGB_VAD,RGB_VAI,  KC_NO,  KC_NO,  KC_NO,  KC_NO,  KC_NO,  KC_NO,RGB_MOD,RGB_RMOD,         KC_NO,RGB_M_P,RGB_M_R,
           KC_NO,  KC_NO,  KC_NO,          KC_NO,  KC_NO,  KC_NO,                          KC_NO,  KC_NO,  KC_NO,  KC_NO,RGB_M_G,RGB_M_SW
@@ -55,25 +58,25 @@ const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) {
     if (record->event.pressed) {
         switch(id) {
             case 0:
-                return MACRO(D(LGUI), D(LSFT), T(3), U(LSFT), U(LGUI), END); //Mac print screen
-                break;
+                return MACRO(D(LGUI), D(LSFT), T(3), U(LSFT), U(LGUI), END);                   // Mac print screen
             case 1:
-                return MACRO(D(LGUI), D(LSFT), T(4), U(LSFT), U(LGUI), END); //Mac print area
-                break;
+                return MACRO(D(LGUI), D(LSFT), T(4), U(LSFT), U(LGUI), END);                   // Mac print area
             case 2:
-                return MACRO(D(LCTL), T(UP), U(LCTL), END);                  //Mac mission control
-                break;
+                return MACRO(D(LCTL), D(LSFT), D(LGUI), T(3), D(LCTL), D(LSFT), D(LGUI), END); // Mac print screen to clipboard
             case 3:
-                return MACRO(D(LCTL), T(DOWN), U(LCTL), END);                //Mac applications
-                break;
+                return MACRO(D(LCTL), D(LSFT), D(LGUI), T(4), D(LCTL), D(LSFT), D(LGUI), END); // Mac print area to clipboard
             case 4:
-                return MACRO(D(LGUI), T(SPC), U(LGUI), END);                 //Mac spotlight search
-                break;
+                return MACRO(D(LCTL), T(UP), U(LCTL), END);                                    // Mac mission control
             case 5:
-                return MACRO(D(LCTL), T(LEFT), U(LCTL), END);                //Mac mission left
-                break;
+                return MACRO(D(LCTL), T(DOWN), U(LCTL), END);                                  // Mac app windows
             case 6:
-                return MACRO(D(LGUI), T(RGHT), U(LGUI), END);                //Mac mission right
+                return MACRO(D(LGUI), T(SPC), U(LGUI), END);                                   // Mac spotlight search
+            case 7:
+                return MACRO(D(LCTL), T(LEFT), U(LCTL), END);                                  // Mac mission left
+            case 8:
+                return MACRO(D(LCTL), T(RGHT), U(LCTL), END);                                  // Mac mission right
+            case 9:
+                rgblight_setrgb(0xff, 0xff, 0xff);                                             // White rgb shortcut
                 break;
         }
     }

keyboards/jc65/v32a/readme.md

@@ -1,6 +1,8 @@
 JC65 ps2avrGB
 =======
 
+![JC65](https://i.imgur.com/9cJ9UbX.jpg)
+
 A 65% keyboard with RGB
 
 Keyboard Maintainer: [Jason Barnachea](https://github.com/nautxx)

keyboards/jc65/v32u4/keymaps/naut/keymap.c

@@ -0,0 +1,93 @@
+#include "v32u4.h"
+
+// Define Layers
+#define _BASE 0
+#define _FNX  1
+#define _MAC  2
+#define _RGB  3
+#define _OFF  4
+
+// Define Macros
+#define M_PRTS  M(0)
+#define M_PRTA  M(1)
+#define M_PRTSC M(2)
+#define M_PRTAC M(3)
+#define M_MSSN  M(4)
+#define M_APPS  M(5)
+#define M_SPOT  M(6)
+#define M_LEFT  M(7)
+#define M_RGHT  M(8)
+#define RGB_WHT M(9)
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+    // Base Layer
+    [_BASE] = KEYMAP(
+         KC_ESC,   KC_1,   KC_2,   KC_3,   KC_4,   KC_5,   KC_6,   KC_7,   KC_8,   KC_9,   KC_0,KC_MINS, KC_EQL,KC_BSLS, KC_GRV, KC_INS,
+         KC_TAB,   KC_Q,   KC_W,   KC_E,   KC_R,   KC_T,   KC_Y,   KC_U,   KC_I,   KC_O,   KC_P,KC_LBRC,KC_RBRC,        KC_BSPC, KC_DEL,
+        KC_LCTL,   KC_A,   KC_S,   KC_D,   KC_F,   KC_G,   KC_H,   KC_J,   KC_K,   KC_L,KC_SCLN,KC_QUOT,                 KC_ENT,KC_PGUP,
+        KC_LSFT,  KC_NO,   KC_Z,   KC_X,   KC_C,   KC_V,   KC_B,   KC_N,   KC_M,KC_COMM, KC_DOT,KC_SLSH,        KC_RSFT,  KC_UP,KC_PGDN,
+          MO(1),KC_LALT,KC_LGUI,         KC_SPC, KC_SPC, KC_SPC,                        KC_RGUI,  KC_NO,KC_RALT,KC_LEFT,KC_DOWN,KC_RGHT
+    ),
+    // Fn Layer
+    [_FNX] = KEYMAP(
+        KC_TRNS,  KC_F1,  KC_F2,  KC_F3,  KC_F4,  KC_F5,  KC_F6,  KC_F7,  KC_F8,  KC_F9, KC_F10, KC_F11, KC_F12,KC_TRNS,  TG(4),  TG(3),
+        KC_CAPS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,        KC_TRNS,KC_TRNS,
+        KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,                KC_TRNS,KC_TRNS,
+        KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,          TG(2),KC_VOLU,KC_MPLY,
+        KC_TRNS,KC_TRNS,KC_TRNS,        KC_TRNS,KC_TRNS,KC_TRNS,                        KC_TRNS,KC_TRNS,KC_TRNS,KC_MRWD,KC_VOLD,KC_MFFD
+    ),
+    // Mac Layer
+    [_MAC] = KEYMAP(
+          TO(0), KC_F14, KC_F15, M_APPS, M_MSSN, KC_F11, KC_F12,KC_MRWD,KC_MPLY,KC_MFFD,KC_MUTE,KC_VOLD,KC_VOLU,KC_EJCT,  KC_NO,  KC_NO,
+          KC_NO, M_PRTS, M_PRTA,  KC_NO,  KC_NO,  KC_NO,  KC_NO,  KC_NO,  KC_NO,  KC_NO,  KC_NO,  KC_NO,  KC_NO,        KC_BSPC,  KC_NO,
+          KC_NO,M_PRTSC,M_PRTAC,  KC_NO,  KC_NO,  KC_NO,  KC_NO,  KC_NO,  KC_NO,  KC_NO,  KC_NO,  KC_NO,                 KC_ENT,  KC_NO,
+          KC_NO,  KC_NO,  KC_NO,   KC_X,   KC_C,   KC_V,  KC_NO,  KC_NO,  KC_NO,  KC_NO,  KC_NO,  KC_NO,          TO(0), M_MSSN,  KC_NO,
+          KC_NO,  KC_NO,KC_LGUI,         M_SPOT, M_SPOT, M_SPOT,                        KC_RGUI,  KC_NO,  KC_NO, M_LEFT, M_APPS, M_RGHT
+    ),
+    // RGB and BL Layer
+    [_RGB] = KEYMAP(
+          TO(0),  KC_NO,  KC_NO,  KC_NO,  KC_NO,  KC_NO,  KC_NO,  KC_NO,  KC_NO,  KC_NO,  KC_NO,  KC_NO,  KC_NO,  KC_NO,  KC_NO,  TO(0),
+          KC_NO,RGB_HUD,RGB_HUI,RGB_WHT,  KC_NO,  KC_NO,  KC_NO,  KC_NO,  KC_NO,  KC_NO,  KC_NO,  KC_NO,  KC_NO,          KC_NO,BL_TOGG,
+          KC_NO,RGB_SAD,RGB_SAI,  KC_NO,  KC_NO,  KC_NO,  KC_NO,  KC_NO,  KC_NO,  KC_NO,  KC_NO,  KC_NO,                  KC_NO,RGB_TOG,
+          KC_NO,  KC_NO,RGB_VAD,RGB_VAI, BL_DEC, BL_INC,  KC_NO,  KC_NO,  KC_NO,  KC_NO,RGB_MOD,RGB_RMOD,         KC_NO,RGB_M_P,RGB_M_R,
+          KC_NO,  KC_NO,  KC_NO,          KC_NO,  KC_NO,  KC_NO,                          KC_NO,  KC_NO,  KC_NO,  KC_NO,RGB_M_G,RGB_M_SW
+    ),
+    // Mash Layer
+    [_OFF] = KEYMAP(
+          TO(0),  KC_NO,  KC_NO,  KC_NO,  KC_NO,  KC_NO,  KC_NO,  KC_NO,  KC_NO,  KC_NO,  KC_NO,  KC_NO,  KC_NO,  KC_NO,  KC_NO,  KC_NO,
+          KC_NO,  KC_NO,  KC_NO,  KC_NO,  KC_NO,  KC_NO,  KC_NO,  KC_NO,  KC_NO,  KC_NO,  KC_NO,  KC_NO,  KC_NO,          KC_NO,  KC_NO,
+          KC_NO,  KC_NO,  KC_NO,  KC_NO,  KC_NO,  KC_NO,  KC_NO,  KC_NO,  KC_NO,  KC_NO,  KC_NO,  KC_NO,                  KC_NO,  KC_NO,
+          KC_NO,  KC_NO,  KC_NO,  KC_NO,  KC_NO,  KC_NO,  KC_NO,  KC_NO,  KC_NO,  KC_NO,  KC_NO,  KC_NO,          KC_NO,  KC_NO,  KC_NO,
+          RESET,  KC_NO,  KC_NO,          KC_NO,  KC_NO,  KC_NO,                          KC_NO,  KC_NO,  KC_NO,  KC_NO,  KC_NO,  KC_NO
+    ),
+};
+
+// The Macros
+const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) {
+    if (record->event.pressed) {
+        switch(id) {
+            case 0:
+                return MACRO(D(LGUI), D(LSFT), T(3), U(LSFT), U(LGUI), END);                   // Mac print screen
+            case 1:
+                return MACRO(D(LGUI), D(LSFT), T(4), U(LSFT), U(LGUI), END);                   // Mac print area
+            case 2:
+                return MACRO(D(LCTL), D(LSFT), D(LGUI), T(3), D(LCTL), D(LSFT), D(LGUI), END); // Mac print screen to clipboard
+            case 3:
+                return MACRO(D(LCTL), D(LSFT), D(LGUI), T(4), D(LCTL), D(LSFT), D(LGUI), END); // Mac print area to clipboard
+            case 4:
+                return MACRO(D(LCTL), T(UP), U(LCTL), END);                                    // Mac mission control
+            case 5:
+                return MACRO(D(LCTL), T(DOWN), U(LCTL), END);                                  // Mac app windows
+            case 6:
+                return MACRO(D(LGUI), T(SPC), U(LGUI), END);                                   // Mac spotlight search
+            case 7:
+                return MACRO(D(LCTL), T(LEFT), U(LCTL), END);                                  // Mac mission left
+            case 8:
+                return MACRO(D(LCTL), T(RGHT), U(LCTL), END);                                  // Mac mission right
+            case 9:
+                rgblight_setrgb(0xff, 0xff, 0xff);                                             // White rgb shortcut
+                break;
+        }
+    }
+    return MACRO_NONE;
+};

keyboards/jc65/v32u4/keymaps/naut/readme.md

@@ -0,0 +1,18 @@
+Naut's Keymap
+=======
+ 
+Layer 1: HHKB Split backspace, 6.25u space, control on caps, Fn on L-Ctl.
+
+Layer 2: F Row on numrow, caps on tab, media shortcuts on arrows
+
+Layer 3: Mac Media buttons on numrow
+
+Layer 4: RGB control
+
+Layer 5: Keyboard off (for mashing purposes and reset)
+
+Keymap Maintainer: [Jason Barnachea](https://github.com/nautxx)
+
+Difference from base layout: HHKBish layout. HHKB Fn layer. Mac media layer. RGB control layer. Button mashing layer.
+
+Intended usage: Daily driver for keyboard peacocking. 

keyboards/jc65/v32u4/keymaps/naut/rules.mk

@@ -0,0 +1,2 @@
+RGBLIGHT_ENABLE = yes
+BACKLIGHT_ENABLE = yes

keyboards/jc65/v32u4/readme.md

@@ -1,7 +1,7 @@
 JC65
 ===
 
-![JC65](https://imgur.com/a/C2oa5)
+![JC65](https://i.imgur.com/I4hCyBI.jpg)
 
 The JC65 PCB actually has two revisions: A QMK native version, and a PS2AVRGB version. Jchan offered both PCBs as options during the M65-A Round 1 group buy, and were also available choices for the 65% acrylic case group buy. In the near future both PCB versions should be available from keyclack.com when the storefront part opens.
 

keyboards/lets_split/keymaps/default/keymap.c

@@ -45,7 +45,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
   KC_ESC,  KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,    KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,    KC_BSPC, \
   KC_TAB,  KC_A,    KC_S,    KC_D,    KC_F,    KC_G,    KC_H,    KC_J,    KC_K,    KC_L,    KC_SCLN, KC_QUOT, \
   KC_LSFT, KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_N,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH, KC_ENT , \
-  KC_LCTRL,KC_LGUI,  KC_LALT, ADJUST,  LOWER,   KC_SPC,  KC_SPC,  RAISE,   KC_LEFT, KC_DOWN, KC_UP,   KC_RGHT \
+  KC_LCTRL,KC_LGUI, KC_LALT, ADJUST,  LOWER,   KC_SPC,  KC_SPC,  RAISE,   KC_LEFT, KC_DOWN, KC_UP,   KC_RGHT \
 ),
 
 /* Colemak
@@ -88,9 +88,9 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
  * ,-----------------------------------------------------------------------------------.
  * |   ~  |   !  |   @  |   #  |   $  |   %  |   ^  |   &  |   *  |   (  |   )  | Del  |
  * |------+------+------+------+------+-------------+------+------+------+------+------|
- * | Del  |  F1  |  F2  |  F3  |  F4  |  F5  |  F6  |   _  |   +  |      |   \  |  |   |
+ * | Del  |  F1  |  F2  |  F3  |  F4  |  F5  |  F6  |   _  |   +  |   {  |   }  |  |   |
  * |------+------+------+------+------+------|------+------+------+------+------+------|
- * |      |  F7  |  F8  |  F9  |  F10 |  F11 |  F12 |ISO ~ |ISO | |      |      |Enter |
+ * |      |  F7  |  F8  |  F9  |  F10 |  F11 |  F12 |ISO ~ |ISO | |      |      |      |
  * |------+------+------+------+------+------+------+------+------+------+------+------|
  * |      |      |      |      |      |             |      | Next | Vol- | Vol+ | Play |
  * `-----------------------------------------------------------------------------------'
@@ -108,7 +108,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
  * |------+------+------+------+------+-------------+------+------+------+------+------|
  * | Del  |  F1  |  F2  |  F3  |  F4  |  F5  |  F6  |   -  |   =  |   [  |   ]  |  \   |
  * |------+------+------+------+------+------|------+------+------+------+------+------|
- * |      |  F7  |  F8  |  F9  |  F10 |  F11 |  F12 |ISO # |ISO / |      |      |Enter |
+ * |      |  F7  |  F8  |  F9  |  F10 |  F11 |  F12 |ISO # |ISO / |      |      |      |
  * |------+------+------+------+------+------+------+------+------+------+------+------|
  * |      |      |      |      |      |             |      | Next | Vol- | Vol+ | Play |
  * `-----------------------------------------------------------------------------------'
@@ -211,4 +211,4 @@ bool process_record_user(uint16_t keycode, keyrecord_t *record) {
       break;
   }
   return true;
-}
+}

keyboards/lets_split/keymaps/hexwire/config.h

@@ -1,26 +0,0 @@
-#ifndef CONFIG_USER_H
-#define CONFIG_USER_H
-
-#include "../../config.h"
-
-/* Use I2C or Serial, not both */
-
-#define USE_SERIAL
-// #define USE_I2C
-
-/* Select hand configuration */
-
-#define MASTER_LEFT
-// #define MASTER_RIGHT
-// #define EE_HANDS
-
-#define TAPPING_TERM 150
-
-#undef RGBLED_NUM
-#define RGBLIGHT_ANIMATIONS
-#define RGBLED_NUM 8
-#define RGBLIGHT_HUE_STEP 8
-#define RGBLIGHT_SAT_STEP 8
-#define RGBLIGHT_VAL_STEP 8
-
-#endif

keyboards/lets_split/keymaps/hexwire/rules.mk

@@ -1,5 +0,0 @@
-RGBLIGHT_ENABLE = yes
-
-ifndef QUANTUM_DIR
-	include ../../../../Makefile
-endif

keyboards/levinson/keymaps/hexwire/README.md

@@ -1,108 +0,0 @@
-Hexwire's Let's Split Layout
-============================
-
-### Changes from default layout
-
-- Main layer
-    - The right space bar key has been changed to backspace, as I only hit space with my left thumb
-    - Backtick is at the lower right and also serves goes to the 3rd function layer when held
-    - Enter key acts as shift when held
-    - Escape key acts as control when held
-    - Minus key at upper right
-- Lower layer
-    - Numbers are on the lower layer, to make it easier to use a numpad on the right hand
-    - Arrow keys
-    - Straight and curly brackets in the middle two columns
-    - Screenshot keys for MacOS
-- Upper layer
-    - Symbols are on the upper layer
-    - Media keys
-    - Page Up/Down, Home/End
-- 3rd function layer
-    - Function keys
-
-## Layouts
-
-### Qwerty
-
-```
-,----+----+----+----+----+----.    ,----+----+----+----+----+----.
- TAB , Q  , W  , E  , R  , T  ,      Y  , U  , I  , O  , P  ,MINS,
-|----+----+----+----+----+----|    |----+----+----+----+----+----|
-  X0 , A  , S  , D  , F  , G  ,      H  , J  , K  , L  ,SCLN,QUOT,
-|----+----+----+----+----+----|    |----+----+----+----+----+----|
- LSFT, Z  , X  , C  , V  , B  ,      N  , M  ,COMM,DOT ,SLSH, X4 ,
-|----+----+----+----+----+----|    |----+----+----+----+----+----|
-  X3 ,LCTL,LALT,LGUI, X1 ,SPC ,     BSPC, X2 ,LEFT,DOWN, UP ,RGHT
-`----+----+----+----+----+----'    `----+----+----+----+----+----'
-```
-
-### Colemak
-
-```
-,----+----+----+----+----+----.    ,----+----+----+----+----+----.
- TAB , Q  , W  , F  , P  , G  ,      J  , L  , U  , Y  ,SCLN,MINS,
-|----+----+----+----+----+----|    |----+----+----+----+----+----|
-  X0 , A  , R  , S  , T  , D  ,      H  , N  , E  , I  , O  ,QUOT,
-|----+----+----+----+----+----|    |----+----+----+----+----+----|
- LSFT, Z  , X  , C  , V  , B  ,      K  , M  ,COMM,DOT ,SLSH, X4 ,
-|----+----+----+----+----+----|    |----+----+----+----+----+----|
-  X3 ,LCTL,LALT,LGUI, X1 ,SPC ,     BSPC, X2 ,LEFT,DOWN, UP ,RGHT
-`----+----+----+----+----+----'    `----+----+----+----+----+----'
-```
-
-### Dvorak
-
-```
-,----+----+----+----+----+----.    ,----+----+----+----+----+----.
- TAB ,QUOT,COMM,DOT , P  , Y  ,      F  , G  , C  , R  , L  ,MINS,
-|----+----+----+----+----+----|    |----+----+----+----+----+----|
-  X0 , A  , O  , E  , U  , I  ,      D  , H  , R  , N  , S  ,SLSH,
-|----+----+----+----+----+----|    |----+----+----+----+----+----|
- LSFT,SCLN, Q  , J  , K  , X  ,      B  , M  , W  , V  , Z  , X4 ,
-|----+----+----+----+----+----|    |----+----+----+----+----+----|
-  X3 ,LCTL,LALT,LGUI, X1 ,SPC ,     BSPC, X2 ,LEFT,DOWN, UP ,RGHT
-`----+----+----+----+----+----'    `----+----+----+----+----+----'
-```
-
-### Lower
-
-```
-,----+----+----+----+----+----.    ,----+----+----+----+----+----.
-     , 1  , 2  , 3  , 4  , 5  ,      6  , 7  , 8  , 9  , 0  ,    ,
-|----+----+----+----+----+----|    |----+----+----+----+----+----|
- DEL ,CAPP,LEFT,RGHT, UP ,LBRC,     RBRC, P4 , P5 , P6 ,PLUS,PIPE,
-|----+----+----+----+----+----|    |----+----+----+----+----+----|
-     ,CPYP,    ,    ,DOWN,LCBR,     RCBR, P1 , P2 , P3 ,MINS,    ,
-|----+----+----+----+----+----|    |----+----+----+----+----+----|
-     ,    ,    ,    ,    ,    ,     DEL ,    , P0 ,PDOT,    ,
-`----+----+----+----+----+----'    `----+----+----+----+----+----'
-```
-
-### Raise
-
-```
-,----+----+----+----+----+----.    ,----+----+----+----+----+----.
-     ,EXLM, AT ,HASH,DLR ,PERC,     CIRC,AMPR,ASTR,LPRN,RPRN,    ,
-|----+----+----+----+----+----|    |----+----+----+----+----+----|
- DEL ,MPRV,MNXT,VOLU,PGUP,UNDS,     EQL ,HOME,    ,    ,    ,BSLS,
-|----+----+----+----+----+----|    |----+----+----+----+----+----|
- MUTE,MSTP,MPLY,VOLD,PGDN,MINS,     PLUS,END ,    ,    ,    ,    ,
-|----+----+----+----+----+----|    |----+----+----+----+----+----|
-     ,    ,    ,    ,    ,    ,         ,    ,    ,    ,    ,    
-`----+----+----+----+----+----'    `----+----+----+----+----+----'
-```
-
-### 3rd function layer
-
-```
-,----+----+----+----+----+----.    ,----+----+----+----+----+----.
- F12 , F1 , F2 , F3 , F4 , F5 ,      F6 , F7 , F8 , F9 ,F10 ,F11 ,
-|----+----+----+----+----+----|    |----+----+----+----+----+----|
-     ,    ,    ,    ,    ,    ,         ,    ,    ,    ,    ,    ,
-|----+----+----+----+----+----|    |----+----+----+----+----+----|
-     ,    ,    ,    ,    ,    ,         ,    ,    ,    ,    ,    ,
-|----+----+----+----+----+----|    |----+----+----+----+----+----|
-     ,    ,    ,    ,    ,    ,         ,    ,    ,    ,    ,   
-`----+----+----+----+----+----'    `----+----+----+----+----+----'
-```

keyboards/levinson/keymaps/hexwire/keymap.c

@@ -1,206 +0,0 @@
-#include "levinson.h"
-#include "action_layer.h"
-#include "eeconfig.h"
-
-extern keymap_config_t keymap_config;
-
-#define _QWERTY 0
-#define _COLEMAK 1
-#define _DVORAK 2
-#define _LOWER 3
-#define _RAISE 4
-#define _FN3 5
-#define _FN4 6
-#define _ADJUST 16
-
-enum custom_keycodes {
-  QWERTY = SAFE_RANGE,
-  COLEMAK,
-  DVORAK,
-  LOWER,
-  RAISE,
-  FN3,
-  FN4,
-  ADJUST,
-};
-
-#define KC_ KC_TRNS
-#define _______ KC_TRNS
-
-#define KC_CAPW LGUI(LSFT(KC_3))        // Capture whole screen
-#define KC_CPYW LGUI(LSFT(LCTL(KC_3)))  // Copy whole screen
-#define KC_CAPP LGUI(LSFT(KC_4))        // Capture portion of screen
-#define KC_CPYP LGUI(LSFT(LCTL(KC_4)))  // Copy portion of screen
-#define KC_X0 MT(MOD_LCTL, KC_ESC)
-#define KC_X1 LOWER
-#define KC_X2 RAISE
-#define KC_X3 LT(_FN3, KC_GRV)
-#define KC_X4 MT(MOD_LSFT, KC_ENT)
-#define KC_X5 BL_STEP
-
-const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
-
-  [_QWERTY] = KC_KEYMAP(
-  //,----+----+----+----+----+----.    ,----+----+----+----+----+----.
-     TAB , Q  , W  , E  , R  , T  ,      Y  , U  , I  , O  , P  ,MINS,
-  //|----+----+----+----+----+----|    |----+----+----+----+----+----|
-      X0 , A  , S  , D  , F  , G  ,      H  , J  , K  , L  ,SCLN,QUOT,
-  //|----+----+----+----+----+----|    |----+----+----+----+----+----|
-     LSFT, Z  , X  , C  , V  , B  ,      N  , M  ,COMM,DOT ,SLSH, X4 ,
-  //|----+----+----+----+----+----|    |----+----+----+----+----+----|
-      X5 ,LCTL,LALT,LGUI, X1 ,SPC ,     BSPC, X2 ,LEFT,DOWN, UP ,RGHT
-  //`----+----+----+----+----+----'    `----+----+----+----+----+----'
-  ),
-
-  [_COLEMAK] = KC_KEYMAP(
-  //,----+----+----+----+----+----.    ,----+----+----+----+----+----.
-     TAB , Q  , W  , F  , P  , G  ,      J  , L  , U  , Y  ,SCLN,MINS,
-  //|----+----+----+----+----+----|    |----+----+----+----+----+----|
-      X0 , A  , R  , S  , T  , D  ,      H  , N  , E  , I  , O  ,QUOT,
-  //|----+----+----+----+----+----|    |----+----+----+----+----+----|
-     LSFT, Z  , X  , C  , V  , B  ,      K  , M  ,COMM,DOT ,SLSH, X4 ,
-  //|----+----+----+----+----+----|    |----+----+----+----+----+----|
-      X3 ,LCTL,LALT,LGUI, X1 ,SPC ,     BSPC, X2 ,LEFT,DOWN, UP ,RGHT
-  //`----+----+----+----+----+----'    `----+----+----+----+----+----'
-  ),
-
-  [_DVORAK] = KC_KEYMAP(
-  //,----+----+----+----+----+----.    ,----+----+----+----+----+----.
-     TAB ,QUOT,COMM,DOT , P  , Y  ,      F  , G  , C  , R  , L  ,MINS,
-  //|----+----+----+----+----+----|    |----+----+----+----+----+----|
-      X0 , A  , O  , E  , U  , I  ,      D  , H  , T  , N  , S  ,SLSH,
-  //|----+----+----+----+----+----|    |----+----+----+----+----+----|
-     LSFT,SCLN, Q  , J  , K  , X  ,      B  , M  , W  , V  , Z  , X4 ,
-  //|----+----+----+----+----+----|    |----+----+----+----+----+----|
-      X3 ,LCTL,LALT,LGUI, X1 ,SPC ,     BSPC, X2 ,LEFT,DOWN, UP ,RGHT
-  //`----+----+----+----+----+----'    `----+----+----+----+----+----'
-  ),
-
-  [_LOWER] = KC_KEYMAP(
-  //,----+----+----+----+----+----.    ,----+----+----+----+----+----.
-         , 1  , 2  , 3  , 4  , 5  ,      6  , 7  , 8  , 9  , 0  ,    ,
-  //|----+----+----+----+----+----|    |----+----+----+----+----+----|
-     DEL ,CAPP,LEFT,RGHT, UP ,LBRC,     RBRC, P4 , P5 , P6 ,PLUS,PIPE,
-  //|----+----+----+----+----+----|    |----+----+----+----+----+----|
-         ,CPYP,    ,    ,DOWN,LCBR,     RCBR, P1 , P2 , P3 ,MINS,    ,
-  //|----+----+----+----+----+----|    |----+----+----+----+----+----|
-         ,    ,    ,    ,    ,    ,     DEL ,    , P0 ,PDOT,    ,
-  //`----+----+----+----+----+----'    `----+----+----+----+----+----'
-  ),
-
-  [_RAISE] = KC_KEYMAP(
-  //,----+----+----+----+----+----.    ,----+----+----+----+----+----.
-         ,EXLM, AT ,HASH,DLR ,PERC,     CIRC,AMPR,ASTR,LPRN,RPRN,    ,
-  //|----+----+----+----+----+----|    |----+----+----+----+----+----|
-     DEL ,MPRV,MNXT,VOLU,PGUP,UNDS,     EQL ,HOME,    ,    ,    ,BSLS,
-  //|----+----+----+----+----+----|    |----+----+----+----+----+----|
-     MUTE,MSTP,MPLY,VOLD,PGDN,MINS,     PLUS,END ,    ,    ,    ,    ,
-  //|----+----+----+----+----+----|    |----+----+----+----+----+----|
-         ,    ,    ,    ,    ,    ,         ,    ,    ,    ,    ,
-  //`----+----+----+----+----+----'    `----+----+----+----+----+----'
-  ),
-
-  [_FN3] = KC_KEYMAP(
-  //,----+----+----+----+----+----.    ,----+----+----+----+----+----.
-     F12 , F1 , F2 , F3 , F4 , F5 ,      F6 , F7 , F8 , F9 ,F10 ,F11 ,
-  //|----+----+----+----+----+----|    |----+----+----+----+----+----|
-         ,    ,    ,    ,    ,    ,         ,    ,    ,    ,    ,    ,
-  //|----+----+----+----+----+----|    |----+----+----+----+----+----|
-         ,    ,    ,    ,    ,    ,         ,    ,    ,    ,    ,    ,
-  //|----+----+----+----+----+----|    |----+----+----+----+----+----|
-         ,    ,    ,    ,    ,    ,         ,    ,    ,    ,    ,
-  //`----+----+----+----+----+----'    `----+----+----+----+----+----'
-  ),
-
-/* Adjust (Lower + Raise)
- * ,-----------------------------------------------------------------------------------.
- * |      | Reset|RGB Tg|RGB Md|Hue Up|Hue Dn|Sat Up|Sat Dn|Val Up|Val Dn|      |      |
- * |------+------+------+------+------+-------------+------+------+------+------+------|
- * |      |      |      |Aud on|Audoff|AGnorm|AGswap|Qwerty|Colemk|Dvorak|      |      |
- * |------+------+------+------+------+------|------+------+------+------+------+------|
- * |      |      |      |      |      |      |      |      |      |      |      |      |
- * |------+------+------+------+------+------+------+------+------+------+------+------|
- * |      |      |      |      |      |             |      |      |      |      |      |
- * `-----------------------------------------------------------------------------------'
- */
-  [_ADJUST] = KEYMAP( \
-    _______, RESET  , RGB_TOG, RGB_MOD, RGB_HUD, RGB_HUI, RGB_SAD, RGB_SAI, RGB_VAD, RGB_VAI, _______, _______, \
-    _______, _______, _______, AU_ON,   AU_OFF,  AG_NORM, AG_SWAP, QWERTY,  COLEMAK, DVORAK,  _______, _______, \
-    _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, \
-    _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ \
-  )
-
-
-};
-
-#ifdef AUDIO_ENABLE
-float tone_qwerty[][2]     = SONG(QWERTY_SOUND);
-float tone_dvorak[][2]     = SONG(DVORAK_SOUND);
-float tone_colemak[][2]    = SONG(COLEMAK_SOUND);
-#endif
-
-void persistent_default_layer_set(uint16_t default_layer) {
-  eeconfig_update_default_layer(default_layer);
-  default_layer_set(default_layer);
-}
-
-bool process_record_user(uint16_t keycode, keyrecord_t *record) {
-  switch (keycode) {
-    case QWERTY:
-      if (record->event.pressed) {
-        #ifdef AUDIO_ENABLE
-          PLAY_SONG(tone_qwerty);
-        #endif
-        persistent_default_layer_set(1UL<<_QWERTY);
-      }
-      return false;
-      break;
-    case COLEMAK:
-      if (record->event.pressed) {
-        #ifdef AUDIO_ENABLE
-          PLAY_SONG(tone_colemak);
-        #endif
-        persistent_default_layer_set(1UL<<_COLEMAK);
-      }
-      return false;
-      break;
-    case DVORAK:
-      if (record->event.pressed) {
-        #ifdef AUDIO_ENABLE
-          PLAY_SONG(tone_dvorak);
-        #endif
-        persistent_default_layer_set(1UL<<_DVORAK);
-      }
-      return false;
-      break;
-    case LOWER:
-      if (record->event.pressed) {
-        layer_on(_LOWER);
-        update_tri_layer(_LOWER, _RAISE, _ADJUST);
-      } else {
-        layer_off(_LOWER);
-        update_tri_layer(_LOWER, _RAISE, _ADJUST);
-      }
-      return false;
-      break;
-    case RAISE:
-      if (record->event.pressed) {
-        layer_on(_RAISE);
-        update_tri_layer(_LOWER, _RAISE, _ADJUST);
-      } else {
-        layer_off(_RAISE);
-        update_tri_layer(_LOWER, _RAISE, _ADJUST);
-      }
-      return false;
-      break;
-    case ADJUST:
-      if (record->event.pressed) {
-        layer_on(_ADJUST);
-      } else {
-        layer_off(_ADJUST);
-      }
-      return false;
-      break;
-  }
-  return true;
-}

keyboards/nyquist/keymaps/pitty/keymap.c

@@ -131,3 +131,45 @@ const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) {
     return MACRO_NONE;
 }
 
+#ifdef RGBLIGHT_ENABLE
+bool rgb_layer_change = true;
+#endif
+
+#define rgblight_set_blue        rgblight_sethsv (0xFF,  0xFF, 0xFF);
+#define rgblight_set_red         rgblight_sethsv (0x00,  0xFF, 0xFF);
+#define rgblight_set_green       rgblight_sethsv (0x78,  0xFF, 0xFF);
+#define rgblight_set_orange      rgblight_sethsv (0x1E,  0xFF, 0xFF);
+#define rgblight_set_teal        rgblight_sethsv (0xC3,  0xFF, 0xFF);
+#define rgblight_set_magenta     rgblight_sethsv (0x12C, 0xFF, 0xFF);
+#define rgblight_set_yellow      rgblight_sethsv (0x3C,  0xFF, 0xFF);
+#define rgblight_set_purple      rgblight_sethsv (0x10E, 0xFF, 0xFF);
+#define rgblight_set_white       rgblight_sethsv (0x00,  0x00, 0xFF);
+#define rgblight_set_black       rgblight_sethsv (0x00,  0x00, 0x00);
+
+uint32_t layer_state_set_user(uint32_t state) {
+#ifdef RGBLIGHT_ENABLE
+  uint8_t default_layer = eeconfig_read_default_layer();
+  if (rgb_layer_change) {
+    switch (biton32(state)) {
+    case _LOWER:
+      rgblight_set_purple;
+      rgblight_mode(5);
+      break;
+    case _VIM:
+	  rgblight_set_green;
+      rgblight_mode(23);
+      break;
+	case _GAME:
+      rgblight_mode(8);
+      break;
+    default:
+      if (default_layer & (1UL << _GAME)) {
+      }
+      else 
+      rgblight_mode(14);
+      break;
+    }
+  }
+#endif
+  return state;
+}

keyboards/nyquist/split_util.h

@@ -2,11 +2,7 @@
 #define SPLIT_KEYBOARD_UTIL_H
 
 #include <stdbool.h>
-
-#ifdef EE_HANDS
-	#define EECONFIG_BOOTMAGIC_END      (uint8_t *)10
-	#define EECONFIG_HANDEDNESS         EECONFIG_BOOTMAGIC_END
-#endif
+#include "eeconfig.h"
 
 #define SLAVE_I2C_ADDRESS           0x32
 

keyboards/orthodox/split_util.h

@@ -2,11 +2,8 @@
 #define SPLIT_KEYBOARD_UTIL_H
 
 #include <stdbool.h>
+#include "eeconfig.h"
 
-#ifdef EE_HANDS
-	#define EECONFIG_BOOTMAGIC_END      (uint8_t *)10
-	#define EECONFIG_HANDEDNESS         EECONFIG_BOOTMAGIC_END
-#endif
 
 #define SLAVE_I2C_ADDRESS           0x32
 

keyboards/planck/planck.h

@@ -29,7 +29,22 @@
 	{ k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b } \
 }
 
+// Used to create a keymap using only KC_ prefixed keys
+#define KC_KEYMAP( \
+	k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, \
+	k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, \
+	k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, \
+	k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b \
+	) \
+	LAYOUT_planck_grid( \
+		KC_##k00, KC_##k01, KC_##k02, KC_##k03, KC_##k04, KC_##k05, KC_##k06, KC_##k07, KC_##k08, KC_##k09, KC_##k0a, KC_##k0b, \
+		KC_##k10, KC_##k11, KC_##k12, KC_##k13, KC_##k14, KC_##k15, KC_##k16, KC_##k17, KC_##k18, KC_##k19, KC_##k1a, KC_##k1b, \
+		KC_##k20, KC_##k21, KC_##k22, KC_##k23, KC_##k24, KC_##k25, KC_##k26, KC_##k27, KC_##k28, KC_##k29, KC_##k2a, KC_##k2b, \
+		KC_##k30, KC_##k31, KC_##k32, KC_##k33, KC_##k34, KC_##k35, KC_##k36, KC_##k37, KC_##k38, KC_##k39, KC_##k3a, KC_##k3b \
+    )
+
 #define KEYMAP LAYOUT_planck_grid
 #define LAYOUT_ortho_4x12 LAYOUT_planck_grid
+#define KC_LAYOUT_ortho_4x12 KC_KEYMAP
 
 #endif

keyboards/viterbi/split_util.h

@@ -2,11 +2,8 @@
 #define SPLIT_KEYBOARD_UTIL_H
 
 #include <stdbool.h>
+#include "eeconfig.h"
 
-#ifdef EE_HANDS
-	#define EECONFIG_BOOTMAGIC_END      (uint8_t *)10
-	#define EECONFIG_HANDEDNESS         EECONFIG_BOOTMAGIC_END
-#endif
 
 #define SLAVE_I2C_ADDRESS           0x32
 

layouts/community/ortho_4x12/bakingpy/config.h

@@ -1,7 +1,7 @@
 #ifndef CONFIG_USER_H
 #define CONFIG_USER_H
 
-#include "../../config.h"
+#include QMK_KEYBOARD_CONFIG_H
 
 /* Use I2C or Serial, not both */
 

layouts/community/ortho_4x12/bakingpy/keymap.c

@@ -1,4 +1,4 @@
-#include "lets_split.h"
+#include QMK_KEYBOARD_H
 #include "action_layer.h"
 #include "eeconfig.h"
 
@@ -9,8 +9,7 @@ extern keymap_config_t keymap_config;
 #define _DVORAK 2
 #define _LOWER 3
 #define _RAISE 4
-#define _FN3 5
-#define _FN4 6
+#define _FKEYS 5
 #define _ADJUST 16
 
 enum custom_keycodes {
@@ -19,8 +18,6 @@ enum custom_keycodes {
   DVORAK,
   LOWER,
   RAISE,
-  FN3,
-  FN4,
   ADJUST,
 };
 
@@ -31,51 +28,52 @@ enum custom_keycodes {
 #define KC_CPYW LGUI(LSFT(LCTL(KC_3)))  // Copy whole screen
 #define KC_CAPP LGUI(LSFT(KC_4))        // Capture portion of screen
 #define KC_CPYP LGUI(LSFT(LCTL(KC_4)))  // Copy portion of screen
-#define KC_X0 MT(MOD_LCTL, KC_ESC)
-#define KC_X1 LOWER
-#define KC_X2 RAISE
-#define KC_X3 LT(_FN3, KC_GRV)
-#define KC_X4 MT(MOD_LSFT, KC_ENT)
+#define KC_ESCC MT(MOD_LCTL, KC_ESC)
+#define KC_LOWR LOWER
+#define KC_RASE RAISE
+#define KC_GRVF LT(_FKEYS, KC_GRV)
+#define KC_ENTS MT(MOD_LSFT, KC_ENT)
+#define KC_BL_S BL_STEP
 
 const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
 
-  [_QWERTY] = KC_KEYMAP(
+  [_QWERTY] = KC_LAYOUT_ortho_4x12(
   //,----+----+----+----+----+----.    ,----+----+----+----+----+----.
      TAB , Q  , W  , E  , R  , T  ,      Y  , U  , I  , O  , P  ,MINS,
   //|----+----+----+----+----+----|    |----+----+----+----+----+----|
-      X0 , A  , S  , D  , F  , G  ,      H  , J  , K  , L  ,SCLN,QUOT,
+     ESCC, A  , S  , D  , F  , G  ,      H  , J  , K  , L  ,SCLN,QUOT,
   //|----+----+----+----+----+----|    |----+----+----+----+----+----|
-     LSFT, Z  , X  , C  , V  , B  ,      N  , M  ,COMM,DOT ,SLSH, X4 ,
+     LSFT, Z  , X  , C  , V  , B  ,      N  , M  ,COMM,DOT ,SLSH,ENTS,
   //|----+----+----+----+----+----|    |----+----+----+----+----+----|
-      X3 ,LCTL,LALT,LGUI, X1 ,SPC ,     BSPC, X2 ,LEFT,DOWN, UP ,RGHT
+     GRVF,LCTL,LALT,LGUI,LOWR,SPC ,     BSPC,RASE,LEFT,DOWN, UP ,RGHT
   //`----+----+----+----+----+----'    `----+----+----+----+----+----'
   ),
 
-  [_COLEMAK] = KC_KEYMAP(
+  [_COLEMAK] = KC_LAYOUT_ortho_4x12(
   //,----+----+----+----+----+----.    ,----+----+----+----+----+----.
      TAB , Q  , W  , F  , P  , G  ,      J  , L  , U  , Y  ,SCLN,MINS,
   //|----+----+----+----+----+----|    |----+----+----+----+----+----|
-      X0 , A  , R  , S  , T  , D  ,      H  , N  , E  , I  , O  ,QUOT,
+     ESCC, A  , R  , S  , T  , D  ,      H  , N  , E  , I  , O  ,QUOT,
   //|----+----+----+----+----+----|    |----+----+----+----+----+----|
-     LSFT, Z  , X  , C  , V  , B  ,      K  , M  ,COMM,DOT ,SLSH, X4 ,
+     LSFT, Z  , X  , C  , V  , B  ,      K  , M  ,COMM,DOT ,SLSH,ENTS,
   //|----+----+----+----+----+----|    |----+----+----+----+----+----|
-      X3 ,LCTL,LALT,LGUI, X1 ,SPC ,     BSPC, X2 ,LEFT,DOWN, UP ,RGHT
+     GRVF,LCTL,LALT,LGUI,LOWR,SPC ,     BSPC,RASE,LEFT,DOWN, UP ,RGHT
   //`----+----+----+----+----+----'    `----+----+----+----+----+----'
   ),
 
-  [_DVORAK] = KC_KEYMAP(
+  [_DVORAK] = KC_LAYOUT_ortho_4x12(
   //,----+----+----+----+----+----.    ,----+----+----+----+----+----.
      TAB ,QUOT,COMM,DOT , P  , Y  ,      F  , G  , C  , R  , L  ,MINS,
   //|----+----+----+----+----+----|    |----+----+----+----+----+----|
-      X0 , A  , O  , E  , U  , I  ,      D  , H  , T  , N  , S  ,SLSH,
+     ESCC, A  , O  , E  , U  , I  ,      D  , H  , T  , N  , S  ,SLSH,
   //|----+----+----+----+----+----|    |----+----+----+----+----+----|
-     LSFT,SCLN, Q  , J  , K  , X  ,      B  , M  , W  , V  , Z  , X4 ,
+     LSFT,SCLN, Q  , J  , K  , X  ,      B  , M  , W  , V  , Z  ,ENTS,
   //|----+----+----+----+----+----|    |----+----+----+----+----+----|
-      X3 ,LCTL,LALT,LGUI, X1 ,SPC ,     BSPC, X2 ,LEFT,DOWN, UP ,RGHT
+     GRVF,LCTL,LALT,LGUI,LOWR,SPC ,     BSPC,RASE,LEFT,DOWN, UP ,RGHT
   //`----+----+----+----+----+----'    `----+----+----+----+----+----'
   ),
 
-  [_LOWER] = KC_KEYMAP(
+  [_LOWER] = KC_LAYOUT_ortho_4x12(
   //,----+----+----+----+----+----.    ,----+----+----+----+----+----.
          , 1  , 2  , 3  , 4  , 5  ,      6  , 7  , 8  , 9  , 0  ,    ,
   //|----+----+----+----+----+----|    |----+----+----+----+----+----|
@@ -83,11 +81,11 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
   //|----+----+----+----+----+----|    |----+----+----+----+----+----|
          ,CPYP,    ,    ,DOWN,LCBR,     RCBR, P1 , P2 , P3 ,MINS,    ,
   //|----+----+----+----+----+----|    |----+----+----+----+----+----|
-         ,    ,    ,    ,    ,    ,     DEL ,    , P0 ,PDOT,    ,
+     BL_S,    ,    ,    ,    ,DEL ,     DEL ,    , P0 ,PDOT,    ,
   //`----+----+----+----+----+----'    `----+----+----+----+----+----'
   ),
 
-  [_RAISE] = KC_KEYMAP(
+  [_RAISE] = KC_LAYOUT_ortho_4x12(
   //,----+----+----+----+----+----.    ,----+----+----+----+----+----.
          ,EXLM, AT ,HASH,DLR ,PERC,     CIRC,AMPR,ASTR,LPRN,RPRN,    ,
   //|----+----+----+----+----+----|    |----+----+----+----+----+----|
@@ -99,7 +97,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
   //`----+----+----+----+----+----'    `----+----+----+----+----+----'
   ),
 
-  [_FN3] = KC_KEYMAP(
+  [_FKEYS] = KC_LAYOUT_ortho_4x12(
   //,----+----+----+----+----+----.    ,----+----+----+----+----+----.
      F12 , F1 , F2 , F3 , F4 , F5 ,      F6 , F7 , F8 , F9 ,F10 ,F11 ,
   //|----+----+----+----+----+----|    |----+----+----+----+----+----|
@@ -122,7 +120,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
  * |      |      |      |      |      |             |      |      |      |      |      |
  * `-----------------------------------------------------------------------------------'
  */
-  [_ADJUST] = KEYMAP( \
+  [_ADJUST] = LAYOUT_ortho_4x12( \
     _______, RESET  , RGB_TOG, RGB_MOD, RGB_HUD, RGB_HUI, RGB_SAD, RGB_SAI, RGB_VAD, RGB_VAI, _______, _______, \
     _______, _______, _______, AU_ON,   AU_OFF,  AG_NORM, AG_SWAP, QWERTY,  COLEMAK, DVORAK,  _______, _______, \
     _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, \

layouts/community/ortho_4x12/bakingpy/readme.md

@@ -1,4 +1,4 @@
-Hexwire's Let's Split Layout
+Bakingpy's Let's Split Layout
 ============================
 
 ### Changes from default layout
@@ -29,11 +29,11 @@ Hexwire's Let's Split Layout
 ,----+----+----+----+----+----.    ,----+----+----+----+----+----.
  TAB , Q  , W  , E  , R  , T  ,      Y  , U  , I  , O  , P  ,MINS,
 |----+----+----+----+----+----|    |----+----+----+----+----+----|
-  X0 , A  , S  , D  , F  , G  ,      H  , J  , K  , L  ,SCLN,QUOT,
+ ESCC, A  , S  , D  , F  , G  ,      H  , J  , K  , L  ,SCLN,QUOT,
 |----+----+----+----+----+----|    |----+----+----+----+----+----|
- LSFT, Z  , X  , C  , V  , B  ,      N  , M  ,COMM,DOT ,SLSH, X4 ,
+ LSFT, Z  , X  , C  , V  , B  ,      N  , M  ,COMM,DOT ,SLSH,ENTS,
 |----+----+----+----+----+----|    |----+----+----+----+----+----|
-  X3 ,LCTL,LALT,LGUI, X1 ,SPC ,     BSPC, X2 ,LEFT,DOWN, UP ,RGHT
+ GRVF,LCTL,LALT,LGUI,LOWR,SPC ,     BSPC,RASE,LEFT,DOWN, UP ,RGHT
 `----+----+----+----+----+----'    `----+----+----+----+----+----'
 ```
 
@@ -43,11 +43,11 @@ Hexwire's Let's Split Layout
 ,----+----+----+----+----+----.    ,----+----+----+----+----+----.
  TAB , Q  , W  , F  , P  , G  ,      J  , L  , U  , Y  ,SCLN,MINS,
 |----+----+----+----+----+----|    |----+----+----+----+----+----|
-  X0 , A  , R  , S  , T  , D  ,      H  , N  , E  , I  , O  ,QUOT,
+ ESCC, A  , R  , S  , T  , D  ,      H  , N  , E  , I  , O  ,QUOT,
 |----+----+----+----+----+----|    |----+----+----+----+----+----|
- LSFT, Z  , X  , C  , V  , B  ,      K  , M  ,COMM,DOT ,SLSH, X4 ,
+ LSFT, Z  , X  , C  , V  , B  ,      K  , M  ,COMM,DOT ,SLSH,ENTS,
 |----+----+----+----+----+----|    |----+----+----+----+----+----|
-  X3 ,LCTL,LALT,LGUI, X1 ,SPC ,     BSPC, X2 ,LEFT,DOWN, UP ,RGHT
+ GRVF,LCTL,LALT,LGUI,LOWR,SPC ,     BSPC,RASE,LEFT,DOWN, UP ,RGHT
 `----+----+----+----+----+----'    `----+----+----+----+----+----'
 ```
 
@@ -57,11 +57,11 @@ Hexwire's Let's Split Layout
 ,----+----+----+----+----+----.    ,----+----+----+----+----+----.
  TAB ,QUOT,COMM,DOT , P  , Y  ,      F  , G  , C  , R  , L  ,MINS,
 |----+----+----+----+----+----|    |----+----+----+----+----+----|
-  X0 , A  , O  , E  , U  , I  ,      D  , H  , R  , N  , S  ,SLSH,
+ ESCC, A  , O  , E  , U  , I  ,      D  , H  , R  , N  , S  ,SLSH,
 |----+----+----+----+----+----|    |----+----+----+----+----+----|
- LSFT,SCLN, Q  , J  , K  , X  ,      B  , M  , W  , V  , Z  , X4 ,
+ LSFT,SCLN, Q  , J  , K  , X  ,      B  , M  , W  , V  , Z  ,ENTS,
 |----+----+----+----+----+----|    |----+----+----+----+----+----|
-  X3 ,LCTL,LALT,LGUI, X1 ,SPC ,     BSPC, X2 ,LEFT,DOWN, UP ,RGHT
+ GRVF,LCTL,LALT,LGUI,LOWR,SPC ,     BSPC,RASE,LEFT,DOWN, UP ,RGHT
 `----+----+----+----+----+----'    `----+----+----+----+----+----'
 ```
 
@@ -75,7 +75,7 @@ Hexwire's Let's Split Layout
 |----+----+----+----+----+----|    |----+----+----+----+----+----|
      ,CPYP,    ,    ,DOWN,LCBR,     RCBR, P1 , P2 , P3 ,MINS,    ,
 |----+----+----+----+----+----|    |----+----+----+----+----+----|
-     ,    ,    ,    ,    ,    ,     DEL ,    , P0 ,PDOT,    ,
+     ,    ,    ,    ,    ,DEL ,     DEL ,    , P0 ,PDOT,    ,
 `----+----+----+----+----+----'    `----+----+----+----+----+----'
 ```
 

layouts/community/ortho_4x12/bakingpy/rules.mk

@@ -0,0 +1,4 @@
+# Enable RGB if not a Planck
+ifeq (,$(findstring planck,$(KEYBOARD)))
+	RGBLIGHT_ENABLE = yes
+endif

quantum/keymap_extras/keymap_swedish.h

@@ -26,8 +26,6 @@
 #define NO_AE   KC_QUOT  // ä
 #undef  NO_CIRC
 #define NO_CIRC LSFT(KC_RBRC)  // ^
-#undef  NO_GRV
-#define NO_GRV  LSFT(NO_BSLS)  //
 #undef  NO_OSLH
 #define NO_OSLH KC_SCLN  // ö
 

tmk_core/avr.mk

@@ -9,11 +9,9 @@ SIZE = avr-size
 AR = avr-ar rcs
 NM = avr-nm
 HEX = $(OBJCOPY) -O $(FORMAT) -R .eeprom -R .fuse -R .lock -R .signature
-EEP = $(OBJCOPY) -j .eeprom --set-section-flags=.eeprom="alloc,load" --change-section-lma .eeprom=0 --no-change-warnings -O $(FORMAT) 
+EEP = $(OBJCOPY) -j .eeprom --set-section-flags=.eeprom="alloc,load" --change-section-lma .eeprom=0 --no-change-warnings -O $(FORMAT)
 BIN =
 
-COMMON_VPATH += $(DRIVER_PATH)/avr
-
 COMPILEFLAGS += -funsigned-char
 COMPILEFLAGS += -funsigned-bitfields
 COMPILEFLAGS += -ffunction-sections
@@ -126,14 +124,14 @@ program: $(BUILD_DIR)/$(TARGET).hex $(BUILD_DIR)/$(TARGET).eep check-size
 
 teensy: $(BUILD_DIR)/$(TARGET).hex check-size
 	$(TEENSY_LOADER_CLI) -mmcu=$(MCU) -w -v $(BUILD_DIR)/$(TARGET).hex
-	
-BATCHISP ?= batchisp 
+
+BATCHISP ?= batchisp
 
 flip: $(BUILD_DIR)/$(TARGET).hex check-size
 	$(BATCHISP) -hardware usb -device $(MCU) -operation erase f
 	$(BATCHISP) -hardware usb -device $(MCU) -operation loadbuffer $(BUILD_DIR)/$(TARGET).hex program
 	$(BATCHISP) -hardware usb -device $(MCU) -operation start reset 0
-	
+
 DFU_PROGRAMMER ?= dfu-programmer
 
 dfu: $(BUILD_DIR)/$(TARGET).hex cpfirmware check-size
@@ -194,7 +192,7 @@ bin: $(BUILD_DIR)/$(TARGET).hex
 
 # copy bin to FLASH.bin
 flashbin: bin
-	$(COPY) $(BUILD_DIR)/$(TARGET).bin FLASH.bin; 
+	$(COPY) $(BUILD_DIR)/$(TARGET).bin FLASH.bin;
 
 # Generate avr-gdb config/init file which does the following:
 #     define the reset signal, load the target file, connect to target, and set
@@ -245,7 +243,7 @@ extcoff: $(BUILD_DIR)/$(TARGET).elf
 	@$(SECHO) $(MSG_EXTENDED_COFF) $(BUILD_DIR)/$(TARGET).cof
 	$(COFFCONVERT) -O coff-ext-avr $< $(BUILD_DIR)/$(TARGET).cof
 
-bootloader: 
+bootloader:
 	make -C lib/lufa/Bootloaders/DFU/ clean
 	echo "#ifndef QMK_KEYBOARD\n#define QMK_KEYBOARD\n" > lib/lufa/Bootloaders/DFU/Keyboard.h
 	echo `grep "MANUFACTURER" $(ALL_CONFIGS) -h | tail -1` >> lib/lufa/Bootloaders/DFU/Keyboard.h

tmk_core/protocol/chibios/main.c

@@ -135,7 +135,10 @@ int main(void) {
 
   /* Wait until the USB or serial link is active */
   while (true) {
-    if(USB_DRIVER.state == USB_ACTIVE) {
+    #if !defined(NO_USB_STARTUP_CHECK)
+      if(USB_DRIVER.state == USB_ACTIVE)
+    #endif
+    {
       driver = &chibios_driver;
       break;
     }